The `podman system prune` command is able to remove build containers that were created during the build, but were not removed because the build terminated unexpectedly.
By default, build containers are not removed to prevent interference with builds in progress. Use the **--build** flag when running the command to remove build containers as well.
Fixes: https://issues.redhat.com/browse/RHEL-62009
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
the podman artifact verb is used to manage OCI artifacts. the following
verbs were added to `podman artifact`:
* add
* inspect
* ls
* pull
* push
* rm
Notable items with this PR:
* all artifact commands and their output are subject to change. i.e.
consider all of this tech preview
* there is no way to add a file to an artifact that already exists in
the store. you would need to delete and recreate the artifact.
* all references to artifacts names should be fully qualified names in
the form of repo/name:tag (i.e. quay.io/artifact/foobar:latest)
* i understand that we will likely want to be able to attribute things
like arch, etc to artifact files. this function is not available yet.
Many thanks to Paul Holzinger for autocompletion PRs and review PRs that
fixed issues early on.
Also fix up some Args function to specify the correct number of args.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Signed-off-by: Brent Baude <bbaude@redhat.com>
Fixes: https://github.com/containers/podman/issues/25002
Also add the ability to inspect containers for
UseImageHosts and UseImageHostname.
Finally fixed some bugs in handling of --no-hosts for Pods,
which I descovered.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add the connective logic so that annotating the manifest as a whole will
succeed as intended, and we don't mix up annotations for an entry and
annotations which are meant for the manifest as a whole. Make
consistent the names which are used when encoding values of certain
fields.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
* Add --hosts-file flag to container create, container run and pod create
* Add HostsFile field to pod inspect and container inspect results
* Test BaseHostsFile config in containers.conf
Signed-off-by: Gavin Lam <gavin.oss@tutamail.com>
New flags in a `podman update` can change the configuration of HealthCheck when the container is started, without having to restart or recreate the container.
This can help determine why a given container suddenly started failing HealthCheck without interfering with the services it provides. For example, reconfigure HealthCheck to keep logs longer than the usual last X results, store logs to other destinations, etc.
Fixes: https://issues.redhat.com/browse/RHEL-60561
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
- fix issues found by recvcheck
- skip k8s files from recvcheck
- remove two removed linters gomnd and execinquery
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
If volume ls was called while another volume was removed at the right
time it could have failed with "no such volume" as we did not ignore
such error during listing. As we list things and this no longer exists
the correct thing is to ignore the error and continue like we do with
containers, pods, etc...
This was pretty easy to reproduce with these two commands running in
different terminals:
while :; do bin/podman volume create test && bin/podman volume rm test || break; done
while :; do bin/podman volume ls || break ; done
I have a slight feeling that this might solve #23913 but I am not to
sure there so I am not adding a Fixes here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This commit resolves an issue where network creation and removal events were not being logged in `podman events`. A new function has been introduced in the `events` package to ensure consistent logging of network lifecycle events. This update will allow users to track network operations more effectively through the event log, improving visibility and aiding in debugging network-related issues.
Fixes: #24032
Signed-off-by: Sainath Sativar <Sativar.sainath@gmail.com>
One of the problems with the Events() API was that you had to call it in
a new goroutine. This meant the the error returned by it had to be read
back via a second channel. This cuased other bugs in the past but here
the biggest problem is that basic errors such as invalid since/until
options were not directly returned to the caller.
It meant in the API we were not able to write http code 200 quickly
because we always waited for the first event or error from the
channels. This in turn made some clients not happy as they assume the
server hangs on time out if no such events are generated.
To fix this we resturcture the entire event flow. First we spawn the
goroutine inside the eventer Read() function so not all the callers have
to. Then we can return the basic error quickly without the goroutine.
The caller then checks the error like any normal function and the API
can use this one to decide which status code to return.
Second we now return errors/event in one channel then the callers can
decide to ignore or log them which makes it a bit more clear.
Fixes c46884aa93 ("podman events: check for an error after we finish reading events")
Fixes#23712
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Fixes#24267
This commit replaces a potentially unsafe slice-assignment with a call to `slices.Clone`.
This could prevent a bug where `saveCommand` and `loadCommand` could end up sharing an underlying array if `parentFlags` has a cap > it's len.
Signed-off-by: Zachary Hanham <z.hanham00@gmail.com>
Prior to this commit, many scp functions existed without option structs, which would make extending functionality (adding new options) impossible without breaking changes, or without adding redundant wrapper functions.
This commit adds in new option types for various scp related functions, and changes those functions' signatures to use the new options.
This commit also modifies the `ImageEngine.Scp()` function's interface to use the new opts.
The commit also renames the existing `ImageScpOptions` entity type to `ScpTransferImageOptions`. This is because the previous `ImageScpOptions` was inaccurate, as it is not the actual options for `ImageEngine.Scp()`. `ImageEngine.Scp()` should instead receive `ImageScpOptions`.
This commit should not change any behavior, however it will break the existing functions' signatures.
Signed-off-by: Zachary Hanham <z.hanham00@gmail.com>
mapMutex is initialized in the ContainerRm function and cannot be released from outside,
thus unlock mutex before returning from function.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Егор Макрушин <emakrushin@astralinux.ru>
Call the wait endpoint right away when a container is started and not
only when attach is done, this allows us for wait to work when the
container has been removed otherwise (i.e. podman-remote run --rm). In
that case it was possible that wait failed and we then fall back to
reading events. However based on some reports there seems to be the
chance that the event readin is not working for them either and returns
a bad error "Cannot get exit code: <nil>" which does not help anybody.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we are activated by systemd the code assumed that we had a valid
URL which was not the case so it failed to parse the URL which causes
the info call to fail all the time.
This fixes two problems first add the schema to the systemd activated
listener URL so it can be parsed correctly but second simply do not
parse it as url as all we care about in the info call is if it is unix
and the file path exists.
Fixes#24152
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
As shown in #23671 these functions can return the raw error without any
useful context to the user which makes it hard to understand where
things went wrong. Simply add some context to some error paths here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we check for a storage container mount we normally expect a
ErrContainerUnknown when it does not exists. However during we check if
it is actually mounted we also can get ErrLayerUnknown when the
contianer was removed between the Container and Mount checks as they do
not happen under the same lock.
Fixes#23671
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
These flags can affect the output of the HealtCheck log. Currently, when a container is configured with HealthCheck, the output from the HealthCheck command is only logged to the container status file, which is accessible via `podman inspect`.
It is also limited to the last five executions and the first 500 characters per execution.
This makes debugging past problems very difficult, since the only information available about the failure of the HealthCheck command is the generic `healthcheck service failed` record.
- The `--health-log-destination` flag sets the destination of the HealthCheck log.
- `none`: (default behavior) `HealthCheckResults` are stored in overlay containers. (For example: `$runroot/healthcheck.log`)
- `directory`: creates a log file named `<container-ID>-healthcheck.log` with JSON `HealthCheckResults` in the specified directory.
- `events_logger`: The log will be written with logging mechanism set by events_loggeri. It also saves the log to a default directory, for performance on a system with a large number of logs.
- The `--health-max-log-count` flag sets the maximum number of attempts in the HealthCheck log file.
- A value of `0` indicates an infinite number of attempts in the log file.
- The default value is `5` attempts in the log file.
- The `--health-max-log-size` flag sets the maximum length of the log stored.
- A value of `0` indicates an infinite log length.
- The default value is `500` log characters.
Add --health-max-log-count flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add --health-max-log-size flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add --health-log-destination flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
The kube generate command can now generate a yaml for
the Job kind and the kube play command can create a pod
and containers with podman when passed in a Job yaml.
Add relevant tests and docs for this.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Adds a note in the `podman machine info` manpage that clarifies
that `defaultmachine` in the `podman machine info` output does
not suggest that a user can set a default podman machine via
system connections.
Additionally adds a Podman 6.0 TODO comment to change the name of the
field to `ActiveMachineConnection` to better describe its purpose.
[NO NEW TESTS NEEDED]
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Many dependencies started using go 1.22 which means we have to follow in
order to update.
Disable the now depracted exportloopref linter as it was replaced by
copyloopvar as go fixed the loop copy problem in 1.22[1]
Another new chnage in go 1.22 is the for loop syntax over ints, the
intrange linter chacks for this but there a lot of loops that have to be
converted so I didn't do it here and disable th elinter for now, th eold
syntax is still fine.
[1] https://go.dev/blog/loopvar-preview
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This commit vendor pre-release version of `c/common:8483ef6022b4`.
It also adapts the code to the new `c/common/libimage` API, which
fixes an image listing race that was listing false warnings.
fixes: #23331
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
The podman container cleanup process runs asynchronous and by the time
it gets the lock it is possible another podman process already did the
cleanup and then did a new init() to start it again. If the cleanup
process gets the lock there it will cause very weird things.
This can be observed in the remote start API as CI flakes.
Fixes#23754
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This started off as an attempt to make `podman stop` on a
container started with `--rm` actually remove the container,
instead of just cleaning it up and waiting for the cleanup
process to finish the removal.
In the process, I realized that `podman run --rmi` was rather
broken. It was only done as part of the Podman CLI, not the
cleanup process (meaning it only worked with attached containers)
and the way it was wired meant that I was fairly confident that
it wouldn't work if I did a `podman stop` on an attached
container run with `--rmi`. I rewired it to use the same
mechanism that `podman run --rm` uses, so it should be a lot more
durable now, and I also wired it into `podman inspect` so you can
tell that a container will remove its image.
Tests have been added for the changes to `podman run --rmi`. No
tests for `stop` on a `run --rm` container as that would be racy.
Fixes#22852
Fixes RHEL-39513
Signed-off-by: Matt Heon <mheon@redhat.com>
The new golangci-lint version 1.60.1 has problems with typecheck when
linting remote files. We have certain pakcages that should never be
inlcuded in remote but the typecheck tries to compile all of them but
this never works and it seems to ignore the exclude files we gave it.
To fix this the proper way is to mark all packages we only use locally
with !remote tags. This is a bit ugly but more correct. I also moved the
DecodeChanges() code around as it is called from the client so the
handles package which should only be remote doesn't really fit anyway.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we create a container we first create it in the storage then in the
libpod db so there is a tiny window where it is seen as storage ctr but
then by the time we mount it we see it was a libpod container.
Fixes#23637
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When the cidfile does not exists and ignore is set the cli parser skips
the file without error and we call into the backend code without any
names at all. This should logically be a NOP but on remote it caused all
containers to be returned which caused podman stop to stop everything in
this case.
Fixes#23554
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The podman container cleanup command is not really intended for human
use. Instead each conmon will spawn this command after the container
exit to make sure we can cleanup resources asynchronously. However this
command will always race against other foreground process such as podman
rm -fa. Therefore it is possible that the ctr was already removed and we
should not log errors in this case.
While these errors are normally not seen as the command is int he
background you can see it if you enable syslog logging and then they
just spam the log with useless errors so just ignore them.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
currently there is no way to specify the mappings, so at least treat a
private user namespace as "auto".
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The pod spec HostUsers boolean only specifies whether a user namespace
is used or not. Hene, the podman specific annotation must have a
higher precedence since it defines how the user namespace is created.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Like commit 55749af0c7 but for podman *pod* stats not the normal podman
stats. We must ignore ErrCtrStopped here as well as this will happen
when the container process exited.
While at it remove a useless argument from the function as it was always
nil and restructure the logic flow to make it easier to read.
Fixes#23334
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
