Create a buildah SystemContext from the existing cli arguments
Pass the SystemContext to the build
Add system test
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
add a new option --preserve-fd that allows to specify a list of FDs to
pass down to the container.
It is similar to --preserve-fds but it allows to specify a list of FDs
instead of the maximum FD number to preserve.
--preserve-fd and --preserve-fds are mutually exclusive.
It requires crun since runc would complain if any fd below
--preserve-fds is not preserved.
Closes: https://github.com/containers/podman/issues/20844
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
When committing containers to create new images, accept a container
config blob being passed in the body of the API request by adding a
Config field to our API structures. Populate it from the body of
requests that we receive, and use its contents as the body of requests
that we make.
Make the libpod commit endpoint split changes values at newlines, just
like the compat endpoint does.
Pass both the config blob and the "changes" slice to buildah's Commit()
API, so that it can handle cases where they overlap or conflict.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Added additional check for event type to be remove and set the correct exitcode.
While it was getting difficult to maintain the omitempty notation for Event->ContainerExitCode, changing the type from int to int ptr gives us the ability to check for ContainerExitCode to be not nil and continue operations from there.
closes#19124
Signed-off-by: Chetan Giradkar <cgiradka@redhat.com>
All `[]string`s in containers.conf have now been migrated to attributed
string slices which require some adjustments in Buildah and Podman.
[NO NEW TESTS NEEDED]
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add podman farm build command that sends out builds to
nodes defined in the farm, builds the images on the farm
nodes, and pulls them back to the local machine to create
a manifest list.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
When the hostNetwork option is set to true in the k8s yaml,
set the pod's hostname to the name of the machine/node as is
done in k8s. Also set the utsns to host.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Add --rdt-class=COS to the create and run command to enable the
assignment of a container to a Class of Service (COS). The COS
represents a part of the cache based on the Cache Allocation Technology
(CAT) feature that is part of Intel's Resource Director Technology
(Intel RDT) feature set. By assigning a container to a COS, all PID's of
the container have only access to the cache space defined for this COS.
The COS has to be pre-configured based on the resctrl kernel driver.
cat_l2 and cat_l3 flags in /proc/cpuinfo represent CAT support for cache
level 2 and 3 respectively.
Signed-off-by: Wolfgang Pross <wolfgang.pross@intel.com>
The processing and setting of the static and volume directories was
scattered across the code base (including c/common) leading to subtle
errors that surfaced in #19938.
There were multiple issues that I try to summarize below:
- c/common loaded the graphroot from c/storage to set the defaults for
static and volume dir. That ignored Podman's --root flag and
surfaced in #19938 and other bugs. c/common does not set the
defaults anymore which gives Podman the ability to detect when the
user/admin configured a custom directory (not empty value).
- When parsing the CLI, Podman (ab)uses containers.conf structures to
set the defaults but also to override them in case the user specified
a flag. The --root flag overrode the static dir which is wrong and
broke a couple of use cases. Now there is a dedicated field for in
the "PodmanConfig" which also includes a containers.conf struct.
- The defaults for static and volume dir and now being set correctly
and adhere to --root.
- The CONTAINERS_CONF_OVERRIDE env variable has not been passed to the
cleanup process. I believe that _all_ env variables should be passed
to conmon to avoid such subtle bugs.
Overall I find that the code and logic is scattered and hard to
understand and follow. I refrained from larger refactorings as I really
just want to get #19938 fixed and then go back to other priorities.
https://github.com/containers/common/pull/1659 broke three pkg/machine
tests. Those have been commented out until getting fixed.
Fixes: #19938
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Container ports defined with containerPort were exposed by default
even though kubernetes interprets them as mostly informative.
Closes#17028
Signed-off-by: Peter Werner <wpw.peter@gmail.com>
The --syslog flag has not been passed to the cleanup process (i.e.,
conmon's exit args) complicating debugging quite a bit.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Move the podman build opts to cmd/common so that
it can be used by podman build and podman farm build
[NO NEW TESTS NEEDED]
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Make sure that `kube down` and `kube play --replace` do not error out
when an object does not exist (or has already been removed). Such kind
of teardown should not be treated as an ordinary `rm` but as an
`rm --ignore`. It's purpose it to make sure that all objects in a YAML
are removed; even if they existed only partially.
Fixes: #19711
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Adds support for --add-compression which accepts multiple compression
formats and when used it will add all instances in a manifest list with
requested compression formats.
Signed-off-by: Aditya R <arajan@redhat.com>
Currently the CIDFile is not removed with podman --remote run --rm
if the client and server are on different machines.
[NO NEW TESTS NEEDED] i
There is currently a test for this that does not fail because the client
and server are on the same machine.
If we run these tests on a MAC or Windows platform, they would start
failing.
Fixes: https://github.com/containers/podman/issues/19420
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Adds an `--podman-only` flag to `podman generate kube` to allow for
reserved annotations to be included in the generated YAML file.
Associated with: #19102
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Adds a `--no-trunc` flag to `podman kube generate` preventing the
annotations from being trimmed at 63 characters. However, due to
the fact the annotations will not be trimmed, any annotation that is
longer than 63 characters means this YAML will no longer be Kubernetes
compatible. However, these YAML files can still be used with `podman
kube play` due to the addition of the new flag below.
Adds a `--no-trunc` flag to `podman kube play` supporting YAML files with
annotations that were not truncated to the Kubernetes maximum length of
63 characters.
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Previous tests have worked by pure chance since the client and server
ran on the same host; the server picked up the credentials created by
the client login.
Extend the gating tests and add a new integration test which is further
capable of exercising the remote code.
Note that fixing authentication support requires adding a new
`--authfile` CLi flag to `manifest inspect`. This will at least allow
for passing an authfile to be bindings. Username and password are not
yet supported.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Users may want to replace the secret used within containers, without
destroying the secret and recreating it.
Partial fix for https://github.com/containers/podman/issues/18667
Make sure podman --remote secret inspect and podman secret inspect
return the same error message.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The --authfile flag has been ignored. Fix that and add a test to make
sure we won't regress another time. Requires a new --tls-verify flag
to actually test the code.
Also bump c/common since common/pull/1538 is required to correctly check
for updates. Note that I had to use the go-mod-edit-replace trick on
c/common as c/buildah would otherwise be moved back to 1.30.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2218315
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Massage the internal APIs to use a string slice instead of a state slice
for passing wait conditions. This paves the way for waiting on
non-state conditions such as "healthy".
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add support for `--imagestore` in podman which allows users to split the filesystem of containers vs image store, imagestore if configured will pull images in image storage instead of the graphRoot while keeping the other parts still in the originally configured graphRoot.
This is an implementation of
https://github.com/containers/storage/pull/1549 in podman.
Signed-off-by: Aditya R <arajan@redhat.com>
add routes using the --route flag.
the no_default_route option in --opt prevents a default route from
getting added automatically.
Signed-off-by: Jan Hendrik Farr <github@jfarr.cc>
To debug a deadlock, we really want to know what lock is actually
locked, so we can figure out what is using that lock. This PR
adds support for this, using trylock to check if every lock on
the system is free or in use. Will really need to be run a few
times in quick succession to verify that it's not a transient
lock and it's actually stuck, but that's not really a big deal.
Signed-off-by: Matt Heon <mheon@redhat.com>
This is a general debug command that identifies any lock
conflicts that could lead to a deadlock. It's only intended for
Libpod developers (while it does tell you if you need to run
`podman system renumber`, you should never have to do that
anyways, and the next commit will include a lot more technical
info in the output that no one except a Libpod dev will want).
Hence, hidden command, and only implemented for the local driver
(recommend just running it by SSHing into a `podman machine` VM
in the unlikely case it's needed by remote Podman).
These conflicts should normally never happen, but having a
command like this is useful for debugging deadlock conditions
when they do occur.
Signed-off-by: Matt Heon <mheon@redhat.com>
This probably should have been in the API since the beginning,
but it's not too late to start now.
The extra information is returned (both via the REST API, and to
the CLI handler for `podman rm`) but is not yet printed - it
feels like adding it to the output could be a breaking change?
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Implement means for reflecting failed containers (i.e., those having
exited non-zero) to better integrate `kube play` with systemd. The
idea is to have the main PID of `kube play` exit non-zero in a
configurable way such that systemd's restart policies can kick in.
When using the default sdnotify-notify policy, the service container
acts as the main PID to further reduce the resource footprint. In that
case, before stopping the service container, Podman will lookup the exit
codes of all non-infra containers. The service will then behave
according to the following three exit-code policies:
- `none`: exit 0 and ignore containers (default)
- `any`: exit non-zero if _any_ container did
- `all`: exit non-zero if _all_ containers did
The upper values can be passed via a hidden `kube play
--service-exit-code-propagation` flag which can be used by tests and
later on by Quadlet.
In case Podman acts as the main PID (i.e., when at least one container
runs with an sdnotify-policy other than "ignore"), Podman will continue
to wait for the service container to exit and reflect its exit code.
Note that this commit also fixes a long-standing annoyance of the
service container exiting non-zero. The underlying issue was that the
service container had been stopped with SIGKILL instead of SIGTERM and
hence exited non-zero. Fixing that was a prerequisite for the exit-code
propagation to work but also improves the integration of `kube play`
with systemd and hence Quadlet with systemd.
Jira: issues.redhat.com/browse/RUN-1776
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add Restarts column to the podman pod ps output to show the total number
of times the containers in a pod were restarted. This is the same as the
restarts column displayed by kubernetes with kubectl get pods. This will
only be displayed when --format={{.Restarts}}.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Add Restarts column to the podman ps output to show how many times a
container was restarted based on its restart policy. This column will be
displayed when --format={{.Restarts}}.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Add --restart flag to pod create to allow users to set the
restart policy for the pod, which applies to all the containers
in the pod. This reuses the restart policy already there for
containers and has the same restart policy options.
Add "never" to the restart policy options to match k8s syntax.
It is a synonym for "no" and does the exact same thing where the
containers are not restarted once exited.
Only the containers that have exited will be restarted based on the
restart policy, running containers will not be restarted when an exited
container is restarted in the same pod (same as is done in k8s).
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Wire in support for writing the digest of the pushed image to a
user-specified file. Requires some massaging of _internal_ APIs
and the extension of the push endpoint to integrate the raw manifest
(i.e., in bytes) in the stream.
Closes: #18216
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The Report will be used in a future change as a new return value for the
internal Push API.
Note: this change is only breaking internal APIs while user-facing
external ones remain unchanges.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Allow users to customize the network_interface option is the network
config. For bridge this allows users to change the bridge name and for
maclvan it will be the same as `--opt parent=...`.
However the main reason for this option is to allow netavark plugins to
make use of it. I demoed the host-device plugin which makes use of this
as an example. While we could let users set them via --opt it is more
natural to just use the field which is designed for that purpose.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
