This commit is courtesy of
```
for f in $(git ls-files *.go | grep -v ^vendor/); do \
sed -i 's/\(errors\..*\)"Error /\1"error /' $f;
done
for f in $(git ls-files *.go | grep -v ^vendor/); do \
sed -i 's/\(errors\..*\)"Failed to /\1"failed to /' $f;
done
```
etc.
Self-reviewed using `git diff --word-diff`, found no issues.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
* Fix misspelled parameter
* add http-proxy support for builds
http_proxy must be set in the podman.service unit file, for example
Environment=http_proxy=<value>
Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Refactor auth pkg to support X-Registry-Config
* Refactor build endpoint to support X-Registry-Config. Supports:
* --creds
* --authfile
* Added X-Reference-Id Header to http.Request to support log event
correlation
* Log headers from http.Request
Signed-off-by: Jhon Honce <jhonce@redhat.com>
The podman remote client ignored the force option due a typo.
If an error occured the remote client would panic with an
index out of range error.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Add a new endpoint for container stats allowing for batch operations on
more than one container. The new endpoint deprecates the
single-container endpoint which will eventually be removed with the next
major release.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
id is the last image id from the set of id's returned via the images
stanza.
id may be deprecated in a future version of the API
Created test_rest_v2_0_0.py to reflect the bump in the API Version.
Fixes#7686
Signed-off-by: Jhon Honce <jhonce@redhat.com>
podman and podman-remote do not exactly match as the lower layer code
checks if the output is destined for a TTY before creating the progress
bars. A future PR for containers/images could change this behavior.
Fixes#7543
Tested with:
$ (echo '# start'; podman-remote pull nginx ) 2>&1 | ts '[%Y-%m-%d %H:%M:%.S]'
$ (echo '# start'; podman pull nginx ) 2>&1 | ts '[%Y-%m-%d %H:%M:%.S]'
Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Refactor/Rename channel.WriteCloser() to encapsulate the channel
* Refactor build endpoint to "live" stream buildah output channels
over API rather then buffering output
* Refactor bindings/tunnel build because endpoint changes
* building tar file now in bindings rather then depending on
caller
* Cleanup initiating extra image engine
* Remove setting fields to zero values (less noise in code)
* Update tests to support remote builds
Fixes#7136Fixes#7137
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Support loading and saving tarballs with more than one image.
Add a new `/libpod/images/export` endpoint to the rest API to
allow for exporting/saving multiple images into an archive.
Note that a non-release version of containers/image is vendored.
A release version must be vendored before cutting a new Podman
release. We force the containers/image version via a replace in
the go.mod file; this way go won't try to match the versions.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add the filter option to the libpod endpoint.
Add support for the name filter on the docker endpoint.
Add apiv2 tests for the network list endpoints.
Enable podman network integration tests for remote.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Add support for generating systemd units
via the api and podman-remote.
Change the GenerateSystemdReport type to return the
units as map[string]string with the unit name as key.
Add `--format` flag to `podman generate systemd`
to allow the output to be formatted as json.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Reference: #6518, a very-frequently-flaking CI test, disabled
a month ago (#7143) because it was triggering so often in CI.
Unfortunately, that seems to have simply swept the problem
under the rug. AFAICT nobody has bothered to look at the
root bug, so let's just reenable. If the problem persists,
I'll let annoyed developers squeaky-wheel 6158 so there's
some incentive to fix it. If the problem has miraculously
gone away in the last month, that's a win too.
(This test failure does not reproduce on my laptop, nor
does it lend itself to devising a simple reproducer on
a test VM.)
Also: since #5325 appears to have been closed as fixed,
remove a 'Skip' that references it. Unfortunately this
also requires removing a lot of other cruft. This was
an incidental oh-by-the-way addition that I thought
would be trivial but ended up causing a much larger diff.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Our previous flow was to perform a hijack before passing a
connection into Libpod, and then Libpod would attach to the
container's attach socket and begin forwarding traffic.
A problem emerges: we write the attach header as soon as the
attach complete. As soon as we write the header, the client
assumes that all is ready, and sends a Start request. This Start
may be processed *before* we successfully finish attaching,
causing us to lose output.
The solution is to handle hijacking inside Libpod. Unfortunately,
this requires a downright extensive refactor of the Attach and
HTTP Exec StartAndAttach code. I think the result is an
improvement in some places (a lot more errors will be handled
with a proper HTTP error code, before the hijack occurs) but
other parts, like the relocation of printing container logs, are
just *bad*. Still, we need this fixed now to get CI back into
good shape...
Fixes#7195
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Most Libpod containers are made via `pkg/specgen/generate` which
includes code to generate an appropriate exit command which will
handle unmounting the container's storage, cleaning up the
container's network, etc. There is one notable exception: pod
infra containers, which are made entirely within Libpod and do
not touch pkg/specgen. As such, no cleanup process, network never
cleaned up, bad things can happen.
There is good news, though - it's not that difficult to add this,
and it's done in this PR. Generally speaking, we don't allow
passing options directly to the infra container at create time,
but we do (optionally) proxy a pre-approved set of options into
it when we create it. Add ExitCommand to these options, and set
it at time of pod creation using the same code we use to generate
exit commands for normal containers.
Fixes#7103
Signed-off-by: Matthew Heon <mheon@redhat.com>
correct small typo that sets the path on windows via the msi xml.
in the remote client, prompt for SSH password when no identity or alternate means of authentication are provided.
Signed-off-by: Brent Baude <bbaude@redhat.com>
The ListContainers API previously had a Pod parameter, which
determined if pod name was returned (but, notably, not Pod ID,
which was returned unconditionally). This was fairly confusing,
so we decided to deprecate/remove the parameter and return it
unconditionally.
To do this without serious performance implications, we need to
avoid expensive JSON decodes of pod configuration in the DB. The
way our Bolt tables are structured, retrieving name given ID is
actually quite cheap, but we did not expose this via the Libpod
API. Add a new GetName API to do this.
Fixes#7214
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
the go binding for remove container was using 'vols' for a key to remove volumes associated to the container. the correct key should be "v" and is documented as such.
Fixes: #7128
Signed-off-by: Brent Baude <bbaude@redhat.com>
The "podman wait to pause|unpause condition" test is failing
several times a day, always a flake. Issue #6518.
Disable it until the cause can be identified and fixed.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Fix a potential panic in the events endpoint when parsing the filters
parameter. Values of the filters map might be empty, so we need to
account for that instead of uncondtitionally accessing the first item.
Also apply a similar for race conditions as done in commit f4a2d25c0f:
Fix a race that could cause read errors to be masked. Masking
such errors is likely to report red herrings since users don't
see that reading failed for some reasons but that a given event
could not be found.
Another race was the handler closing event channel, which could lead to
two kinds of panics: double close, send to close channel. The backend
takes care of that. However, make sure that the backend stops working
in case the context has been cancelled.
Fixes: #6899
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
I confused STDIN and STDOUT's file descriptors (it's 0 and 1, I
thought they were 1 and 0). As such, we were looking at whether
we wanted to print STDIN when we looked to print STDOUT. This
bool was set when `-i` was set in at the `podman exec` command
line, which masked the problem when it was set.
Fixes#6890Fixes#6891Fixes#6892
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Support both `last` and `limit` for in the containers listing endpoint.
We intended to use `limit` which is also mentioned in the docs, but the
implementation ended up using `last` as the http parameter; likely being
caused by the CLI using `--last`. To avoid any regression, we decided
for supporting both and aliasing `last`.
Fixes: #6413
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
address problem when multiple -t were sent. and rework remote build's tarball if a context dir is given other than ".".
Fixes: #6578Fixes: #6577
Signed-off-by: Brent Baude <bbaude@redhat.com>
Addes more docker py test
Optimize test to import images from cache
Rename test class and dir for python unittest framework
Signed-off-by: Sujil02 <sushah@redhat.com>
* podman --remote ssh://<user>:<password>@<host>:<port><path>
* podman --remote ssh://<user>:<password>@<host>:<port><path> \
--identity <path> --passphrase <phrase>
* ssh-add <key>
podman --remote ssh://<user>@<host><path>
* Fix `podman help` to run even if podman missing components
* Prompt for passphrase on stdin IFF key is protected and passphrase
not given via any other configuration
* cobra flags do not support optional value flags therefore refactored
--remote to be a boolean and --url will now contain the URI to Podman
service
Signed-off-by: Jhon Honce <jhonce@redhat.com>
The biggest obstacle here was cleanup - we needed a way to remove
detached exec sessions after they exited, but there's no way to
tell if an exec session will be attached or detached when it's
created, and that's when we must add the exit command that would
do the removal. The solution was adding a delay to the exit
command (5 minutes), which gives sufficient time for attached
exec sessions to retrieve the exit code of the session after it
exits, but still guarantees that they will be removed, even for
detached sessions. This requires Conmon 2.0.17, which has the new
`--exit-delay` flag.
As part of the exit command rework, we can drop the hack we were
using to clean up exec sessions (remove them as part of inspect).
This is a lot cleaner, and I'm a lot happier about it.
Otherwise, this is just plumbing - we need a bindings call for
detached exec, and that needed to be added to the tunnel mode
backend for entities.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This adds bindings for starting exec sessions, and then uses them
to wire up detached exec. Code is heavily based on Attach code
for containers, slightly modified to handle exec sessions.
Bindings are presently attached-only, detached is pending on a
Conmon update landing in CI. I'll probably get to that next.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Support the `X-Registry-Auth` http-request header.
* The content of the header is a base64 encoded JSON payload which can
either be a single auth config or a map of auth configs (user+pw or
token) with the corresponding registries being the keys. Vanilla
Docker, projectatomic Docker and the bindings are transparantly
supported.
* Add a hidden `--registries-conf` flag. Buildah exposes the same
flag, mostly for testing purposes.
* Do all credential parsing in the client (i.e., `cmd/podman`) pass
the username and password in the backend instead of unparsed
credentials.
* Add a `pkg/auth` which handles most of the heavy lifting.
* Go through the authentication-handling code of most commands, bindings
and endpoints. Migrate them to the new code and fix issues as seen.
A final evaluation and more tests is still required *after* this
change.
* The manifest-push endpoint is missing certain parameters and should
use the ABI function instead. Adding auth-support isn't really
possible without these parts working.
* The container commands and endpoints (i.e., create and run) have not
been changed yet. The APIs don't yet account for the authfile.
* Add authentication tests to `pkg/bindings`.
Fixes: #6384
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* wire up bindings and handler for obtaining logs remotely
* enable debug logging from podman in e2e test using DEBUG and
DEBUG_SERVICE env variables
* Fix error in streaming log frames
* enable remote logs test
Signed-off-by: Jhon Honce <jhonce@redhat.com>
