id is the last image id from the set of id's returned via the images
stanza.
id may be deprecated in a future version of the API
Created test_rest_v2_0_0.py to reflect the bump in the API Version.
Fixes#7686
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Reference: #6518, a very-frequently-flaking CI test, disabled
a month ago (#7143) because it was triggering so often in CI.
Unfortunately, that seems to have simply swept the problem
under the rug. AFAICT nobody has bothered to look at the
root bug, so let's just reenable. If the problem persists,
I'll let annoyed developers squeaky-wheel 6158 so there's
some incentive to fix it. If the problem has miraculously
gone away in the last month, that's a win too.
(This test failure does not reproduce on my laptop, nor
does it lend itself to devising a simple reproducer on
a test VM.)
Also: since #5325 appears to have been closed as fixed,
remove a 'Skip' that references it. Unfortunately this
also requires removing a lot of other cruft. This was
an incidental oh-by-the-way addition that I thought
would be trivial but ended up causing a much larger diff.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Most Libpod containers are made via `pkg/specgen/generate` which
includes code to generate an appropriate exit command which will
handle unmounting the container's storage, cleaning up the
container's network, etc. There is one notable exception: pod
infra containers, which are made entirely within Libpod and do
not touch pkg/specgen. As such, no cleanup process, network never
cleaned up, bad things can happen.
There is good news, though - it's not that difficult to add this,
and it's done in this PR. Generally speaking, we don't allow
passing options directly to the infra container at create time,
but we do (optionally) proxy a pre-approved set of options into
it when we create it. Add ExitCommand to these options, and set
it at time of pod creation using the same code we use to generate
exit commands for normal containers.
Fixes#7103
Signed-off-by: Matthew Heon <mheon@redhat.com>
The ListContainers API previously had a Pod parameter, which
determined if pod name was returned (but, notably, not Pod ID,
which was returned unconditionally). This was fairly confusing,
so we decided to deprecate/remove the parameter and return it
unconditionally.
To do this without serious performance implications, we need to
avoid expensive JSON decodes of pod configuration in the DB. The
way our Bolt tables are structured, retrieving name given ID is
actually quite cheap, but we did not expose this via the Libpod
API. Add a new GetName API to do this.
Fixes#7214
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The "podman wait to pause|unpause condition" test is failing
several times a day, always a flake. Issue #6518.
Disable it until the cause can be identified and fixed.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Fix a potential panic in the events endpoint when parsing the filters
parameter. Values of the filters map might be empty, so we need to
account for that instead of uncondtitionally accessing the first item.
Also apply a similar for race conditions as done in commit f4a2d25c0f:
Fix a race that could cause read errors to be masked. Masking
such errors is likely to report red herrings since users don't
see that reading failed for some reasons but that a given event
could not be found.
Another race was the handler closing event channel, which could lead to
two kinds of panics: double close, send to close channel. The backend
takes care of that. However, make sure that the backend stops working
in case the context has been cancelled.
Fixes: #6899
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Addes more docker py test
Optimize test to import images from cache
Rename test class and dir for python unittest framework
Signed-off-by: Sujil02 <sushah@redhat.com>
* Support the `X-Registry-Auth` http-request header.
* The content of the header is a base64 encoded JSON payload which can
either be a single auth config or a map of auth configs (user+pw or
token) with the corresponding registries being the keys. Vanilla
Docker, projectatomic Docker and the bindings are transparantly
supported.
* Add a hidden `--registries-conf` flag. Buildah exposes the same
flag, mostly for testing purposes.
* Do all credential parsing in the client (i.e., `cmd/podman`) pass
the username and password in the backend instead of unparsed
credentials.
* Add a `pkg/auth` which handles most of the heavy lifting.
* Go through the authentication-handling code of most commands, bindings
and endpoints. Migrate them to the new code and fix issues as seen.
A final evaluation and more tests is still required *after* this
change.
* The manifest-push endpoint is missing certain parameters and should
use the ABI function instead. Adding auth-support isn't really
possible without these parts working.
* The container commands and endpoints (i.e., create and run) have not
been changed yet. The APIs don't yet account for the authfile.
* Add authentication tests to `pkg/bindings`.
Fixes: #6384
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* wire up bindings and handler for obtaining logs remotely
* enable debug logging from podman in e2e test using DEBUG and
DEBUG_SERVICE env variables
* Fix error in streaming log frames
* enable remote logs test
Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Change function call to use readers/writers in place channels
* Support stdin for pushing data from client to container
* Add bindings test
Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Add ErrLostSync to report lost of sync when de-mux'ing stream
* Add logus.SetLevel(logrus.DebugLevel) when `go test -v` given
* Add context to debugging messages
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Adds tunnel routes for system reset.
Makes forces flag local as options are not propogated down the stack.
Adds relevant test cases and swagger docs.
Signed-off-by: Sujil02 <sushah@redhat.com>
some small fix ups for binding tests and then make them required.
update containers-common
V2 bindings tests were failing because of changes introduced in commit
a2ad5bb.
Fix some typos.
Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
in the case where the specgen attribute for Env and Labels are nil, we should should then make the map IF we have labels and envs that need to be added.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Continue the refactoring of image removal. I didn't manage to break all
the following changes into smaller and easier to digest commits due to
time constraints:
* Return an error slice instead of a single error. Use multierror only
in the client/frontend. Reflect that in the types.
* Use the batch image removal in the client while preserving the more
rest-idiomatic single-image removal endpoint.
* Add a new handler for the single-image removal endpoint to make it
share the same code as the batch endpoint.
* Expose bindings for the single and batch endpoints, so we can
properly test them.
* Add several convenience functions for error handling to
pkg/errorhandling.
* Set the correct error type in libpod to set the exit code to 2 when
one or more containers are using an image.
* Massage the bindings tests a bit and tackle compilation errors.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Register system prune route, handler to support system prune,
Adds testcase to validate the system prune flow.
Signed-off-by: Sujil02 <sushah@redhat.com>
Add the ability to prune pods for api v2,
Includes the addition of force flag, for client side prompt.
Update test suite to support this use case.
Signed-off-by: Sujil02 <sushah@redhat.com>
Adds ability to prune containers for v2.
Adds client side prompt with force flag and filters options to prune.
Signed-off-by: Sujil02 <sushah@redhat.com>
reverting name changes to the listcontainer structure because it negatively impacted the direct consumption of the restful API. instead we now use a local structure in the CLI to modify the output as needed.
Signed-off-by: Brent Baude <bbaude@redhat.com>
remove the use of template functions images and history to allow for straight-forward user experience. instead of templates we use structs and struct methods.
Signed-off-by: Brent Baude <bbaude@redhat.com>
add the ability to clean up after a container has attempted to run. this is also important for podman run --rm --rmi.
also included are fixes and tweaks to various code bits to correct regressions on output.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Also implement a new libpod endpoint to add more parameters and to
prevent us from converting between slices and maps and make use of
the filter parsing in the image backend.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
the current implementation of info, while typed, is very loosely done so. we need stronger types for our apiv2 implmentation and bindings.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Implement pulling images for the v2 client. What I _really_ don't like
is the fact that we are now having a near identical code clone among
`pkg/domain/infra/abi` and `pkg/api/handlers/libpod`. Partly because we
don't yet have a higher-level pull function and partly because we have
redudancy among `pkg/domain` and `pkg/api`. Pull might be a high
outlier but I am concerned already by the potential of introducing more
redundancy. I'd love to `infra/abi` and `pkg/abi` to really use the
same code in the future.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
using the factory approach similar to container, we now create pods based on a pod spec generator. wired up the podmanv2 pod create command, podcreatewithspec binding, simple binding test, and apiv2 endpoint.
also included some code refactoring as it introduced as easy circular import.
Signed-off-by: Brent Baude <bbaude@redhat.com>
