The `--pull` flag should be using the "pull if newer" pull policy rather
than "pull always". This aligns with what the help message states, what
Buildah does and, according to #9111, what was done before,
Also add a test to prevent future regressions.
Fixes: #9111
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Fixup the bindings and the handling of the --external --por and --sort
flags.
The --storage option was renamed --external, make sure we use
external up and down the stack.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Make sure to write error from conmon on the hijacked http connection.
This fixes issues where errors were not reported on the client side,
for instance, when specified command was not found on the container.
To future generations: I am sorry. The code is complex, and there are
many interdependencies among the concurrent goroutines. I added more
complexity on top but I don't have a good idea of how to reduce
complexity in the available time.
Fixes: #8281
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
A container's workdir can be specified via the CLI via `--workdir` and
via an image config with the CLI having precedence.
Since images have a tendency to specify workdirs without necessarily
shipping the paths with the root FS, make sure that Podman creates the
workdir. When specified via the CLI, do not create the path, but check
for its existence and return a human-friendly error.
NOTE: `crun` is performing a similar check that would yield exit code
127. With this change, however, Podman performs the check and yields
exit code 126. Since this is specific to `crun`, I do not consider it
to be a breaking change of Podman.
Fixes: #9040
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The --default-mounts-file path was not being handled in
podman build. This will enable it to use for testing.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
- stop: test --all and --ignore (#9051)
- build: test /run/secrets (#8679, but see below)
- sensitive mount points: deal with 'stat' failures
- selinux: confirm useful diagnostics on unknown labels (#8946)
The 'build' test is intended as a fix for #8679, in which
'podman build' does not mount secrets from mounts.conf.
Unfortunately, as of this writing, 'podman build' does
not pass the --default-mounts-file option to buildah,
so there's no reasonable way to test this path. Still,
we can at least confirm /run/secrets on 'podman run'.
The /sys thing is related to #8949: RHEL8, rootless, cgroups v1.
It's just a workaround to get gating tests to pass on RHEL.
Signed-off-by: Ed Santiago <santiago@redhat.com>
I found several problems with container remove
podman-remote rm --all
Was not handled
podman-remote rm --ignore
Was not handled
Return better errors when attempting to remove an --external container.
Currently we return the container does not exists, as opposed to container
is an external container that is being used.
This patch also consolidates the tunnel code to use the same code for
removing the container, as the local API, removing duplication of code
and potential problems.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Podman defers stopping the container to the runtime, which can take some
time. Keeping the lock while waiting for the runtime to complete the
stop procedure, prevents other commands from acquiring the lock as shown
in #8501.
To improve the user experience, release the lock before invoking the
runtime, and re-acquire the lock when the runtime is finished. Also
introduce an intermediate "stopping" to properly distinguish from
"stopped" containers etc.
Fixes: #8501
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Systemd is now complaining or mentioning /var/run as a legacy directory.
It has been many years where /var/run is a symlink to /run on all
most distributions, make the change to the default.
Partial fix for https://github.com/containers/podman/issues/8369
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
A opened file object of a logfile gets lost because the variable
`logfile` is redefined in a `if` block. This fix stops redefining
the variable.
Signed-off-by: Hironori Shiina <Hironori.Shiina@fujitsu.com>
The new Ubuntu 20.04 VMs seem very slow and fail reproducibly in a build
test (i.e, "wordir, cmd, env, label"). Bumping up the time out to 120
seconds will help get the CI green.
See github.com/containers/podman/pull/8747.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Implement `podman-remote cp` and break out the logic from the previously
added `pkg/copy` into it's basic building blocks and move them up into
the `ContainerEngine` interface and `cmd/podman`.
The `--pause` and `--extract` flags are now deprecated and turned into
nops.
Note that this commit is vendoring a non-release version of Buildah to
pull in updates to the copier package.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Tracking down a CI failure earlier today, I was slightly
delayed by the absence of context information in a test
failure. This PR adds full command context to each
subtest, making it much easier for the developer to
narrow down the cause of a failure.
Signed-off-by: Ed Santiago <santiago@redhat.com>
- run test: minor cleanup to .containerenv test. Basically,
make it do only two podman-runs (they're expensive) and
tighten up the results checks
- ps test: add ps -a --storage. Requires small tweak to
run_podman helper, so we can have "timeout" be an expected
result
- sdnotify test: workaround for #8718 (seeing MAINPID=xxx as
last output line instead of READY=1). As found by the
newly-added debugging echos, what we are seeing is:
MAINPID=103530
READY=1
MAINPID=103530
It's not supposed to be that way; it's supposed to be just
the first two. But when faced with reality, we must bend
to accommodate it, so let's accept READY=1 anywhere in
the output stream, not just as the last line.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Followup to #8284, due to my not having noticed #8096.
RHEL gating tests are failing again due to rhbz#1895105, the
one where we can't run journalctl rootless on RHEL. #8284 fixed
this for some RHEL builds of older podman, but I missed #8096
which added yet another logs test.
This brings us to three journalctl exceptions, which means
it gets complicated because I have to refactor it all.
**THIS IS NOT SUSTAINABLE**. We need some way to have a similar
setup in CI, with a permission-less rootless login, so we don't
add yet another logs test some day and discover, months later,
that it doesn't work on RHEL and then have to go into crisis
mode.
Signed-off-by: Ed Santiago <santiago@redhat.com>
There exists a unit test to ensure that shell completion functions are
defined. However there was no check about the quality of the provided
shell completions. Lets change that.
The idea is to create a general test that makes sure we are suggesting
containers,pods,images... for the correct commands. This works by
reading the command use line and checking for each arg if we provide
the correct suggestions for this arg.
It includes the following tests:
- flag suggestions if [options] is set
- container, pod, image, network, volume, registry completion
- path completion for the appropriate arg KEYWORDS (`PATH`,`CONTEXT`,etc.)
- no completion if there are no args
- completion for more than one arg if it ends with `...]`
The test does not cover completion values for flags and not every arg KEYWORD
is supported. This is still a huge improvement and covers most use cases.
This test spotted several inconsistencies between the completion and the
command use line. All of them have been adjusted to make the test pass.
The biggest advantage is that the completions always match the latest
command changes. So if someone changes the arguments for a command this
ensures that the completions must be adjusted.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
This adds a new command, 'podman network reload', to reload the
networks of existing containers, forcing recreation of firewall
rules after e.g. `firewall-cmd --reload` wipes them out.
Under the hood, this works by calling CNI to tear down the
existing network, then recreate it using identical settings. We
request that CNI preserve the old IP and MAC address in most
cases (where the container only had 1 IP/MAC), but there will be
some downtime inherent to the teardown/bring-up approach. The
architecture of CNI doesn't really make doing this without
downtime easy (or maybe even possible...).
At present, this only works for root Podman, and only locally.
I don't think there is much of a point to adding remote support
(this is very much a local debugging command), but I think adding
rootless support (to kill/recreate slirp4netns) could be
valuable.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
As suggested by @edsantiago, add a comment to the regression test
of #8558 to better document the context.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When creating a container, do not clear the input-image name before
looking up image names. Also add a regression test.
Fixes: #8558
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Add a new `pkg/copy` to centralize all container-copy related code.
* The new code is based on Buildah's `copier` package.
* The compat `/archive` endpoints use the new `copy` package.
* Update docs and an several new tests.
* Includes many fixes, most notably, the look-up of volumes and mounts.
Breaking changes:
* Podman is now expecting that container-destination paths exist.
Before, Podman created the paths if needed. Docker does not do
that and I believe Podman should not either as it's a recipe for
masking errors. These errors may be user induced (e.g., a path
typo), or internal typos (e.g., when the destination may be a
mistakenly unmounted volume). Let's keep the magic low for such
a security sensitive feature.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We have been asked to leak some information into the container
to indicate:
* The name and id of the container
* The version of podman used to launch the container
* The image name and ID the container is based on.
* Whether the container engine is running in rootless mode.
Fixes: https://github.com/containers/podman/issues/6192
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Looks like #7337 was fixed (by #8112). Reenable a disabled
test for it; and make it actually work. Confirmed that
newly-added test fails on d45676549 (the commit before #8112).
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add the mask and unmask option to the --security-opt flag
to allow users to specify paths to mask and unmask in the
container. If unmask=ALL, this will unmask all the paths we
mask by default.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
- run test : tweaks to recently-added network-conflict test:
* remove "-d" in run
* confirm exact warning text, and also that container
runs successfully
* test multiple --net options (regression #8057)
- images, run, build, exec tests: add multiple-flag
testing for various flags, confirming as appropriate
whether options are overridden or accumulated.
- ps test : add --filter and --sort tests
- pod test: run 'ping' inside container (confirms that
container gets PING capability)
Signed-off-by: Ed Santiago <santiago@redhat.com>
- images: confirm that 'podman images' emits headings
even if there are no images present. Intended to
replace e2e test which is difficult to get working
under podman-remote.
- build: add test for #8092, podman-build gobbling stdin.
Workaround needed for issues #8342 and #8343, in which
podman-remote output differs from podman local.
- volumes: add test for #8307, double-lock on same volume.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Check to see if we are recording the version of buildah
used to build the image as a label in the image.
Also we should make sure the filter "since" works.
We are only testing "after", which we don't document.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
