Since some unit tests use "busybox", we need to point it to some alias
if we want it to pass CI on F34 where we're running in enforced mode.
Furthermore, make sure that the registries.conf can actually be
overridden in the code.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
In contrast to `assert.NoError`, `require.NoError` treats mismatches
fatally which in many cases is necessary to prevent subsequent checks
from segfaulting.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
As part of a fix for an earlier bug (#5698) we added the ability
for Podman to chown volumes to correctly match the user running
in the container, even in adverse circumstances (where we don't
know the right UID/GID until very late in the process). However,
we only did this for volumes created automatically by a
`podman run` or `podman create`. Volumes made by
`podman volume create` do not get this chown, so their
permissions may not be correct. I've looked, and I don't think
there's a good reason not to do this chwon for all volumes the
first time the container is started.
I would prefer to do this as part of volume copy-up, but I don't
think that's really possible (copy-up happens earlier in the
process and we don't have a spec). There is a small chance, as
things stand, that a copy-up happens for one container and then
a chown for a second, unrelated container, but the odds of this
are astronomically small (we'd need a very close race between two
starting containers).
Fixes#9608
Signed-off-by: Matthew Heon <mheon@redhat.com>
Erik Sjolund reported an issue where a badly formated file
could be passed into the `--tz` option and then the date in the container
would be badly messed up:
```
erik@laptop:~$ echo Hello > file.txt
erik@laptop:~$ podman run --tz=../../../home/erik/file.txt --rm -ti
docker.io/library/alpine cat /etc/localtime
Hello
erik@laptop:~$ podman --version
podman version 3.0.0-rc1
erik@laptop:~$
```
This fix checks to make sure the TZ passed in is a valid
value and then proceeds with the rest of the processing.
This was first reported as a potential security issue, but it
was thought not to be. However, I thought closing the hole
sooner rather than later would be good.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Fixes#5788
This commit adds support for named volumes in podman-generate-kube.
Named volumes are output in the YAML as PersistentVolumeClaims.
To avoid naming conflicts, the volume name is suffixed with "-pvc".
This commit adds a corresponding suffix for host path mounts.
Host path volumes are suffixed with "-host".
Signed-off-by: Jordan Williams <jordan@jwillikers.com>
* Remove orphaned code
* Add meaningful error from LoadImageFromSingleImageArchive() when
heuristic fails to determine payload format
* Correct swagger to output correct types and headers
Signed-off-by: Jhon Honce <jhonce@redhat.com>
when --privileged is used, make sure to not request more capabilities
than currently available in the current context.
[NO TESTS NEEDED] since it fixes existing tests.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Some packages used by the remote client imported the libpod package.
This is not wanted because it adds unnecessary bloat to the client and
also causes problems with platform specific code(linux only), see #9710.
The solution is to move the used functions/variables into extra packages
which do not import libpod.
This change shrinks the remote client size more than 6MB compared to the
current master.
[NO TESTS NEEDED]
I have no idea how to test this properly but with #9710 the cross
compile should fail.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The `libpod/network` package should only be used on the backend and not the
client. The client used this package only for two functions so move them
into a new `pkg/network` package.
This is needed so we can put linux only code into `libpod/network`, see #9710.
[NO TESTS NEEDED]
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Currently we were overwrapping error returned from removal
of a non existing container.
$ podman rm bogus -f
Error: failed to evict container: "": failed to find container "bogus" in state: no container with name or ID bogus found: no such container
Removal of wraps gets us to.
./bin/podman rm bogus -f
Error: no container with name or ID "bogus" found: no such container
Finally also added quotes around container name to help make it standout
when you get an error, currently it gets lost in the error.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When copying from a container, make sure to evaluate the symlinks
correctly. Add tests copying a symlinked directory from a running and
a non-running container to execute both path-resolution paths.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Make sure the files are chowned to the host/container user, depending on
where things are being copied to.
Fixes: #9626
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Ignore permission errors when copying from a rootless container.
TTY devices inside rootless containers are owned by the host's
root user which is "nobody" inside the container's user namespace
rendering us unable to even read them.
Enable the integration test which was temporarily disabled for rootless
users.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Sometimes if the system crashes while an image is being pulled
containers/storage can get into a bad state. This PR allows the
user to call into container storage to remove the image.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently if you attempt to create a kube.yaml file off of a non running
container where the container runs as a specific User, the creation
fails because the storage container is not mounted. Podman is supposed to
read the /etc/passwd entry inside of the container but since the
container is not mounted, the c.State.Mountpoint == "". Podman
incorrectly attempts to read /etc/passwd on the host, and fails if the
specified user is not in the hosts /etc/passwd.
This PR mounts the storage container, if it was not mounted so the read
succeeds.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The --trace has helped in early stages analyze Podman code. However,
it's contributing to dependency and binary bloat. The standard go
tooling can also help in profiling, so let's turn `--trace` into a NOP.
[NO TESTS NEEDED]
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Unlocking an already unlocked lock is a panic. As such, we have
to make sure that the deferred c.lock.Unlock() in
c.StopWithTimeout() always runs on a locked container. There was
a case in c.stop() where we could return an error after we unlock
the container to stop it, but before we re-lock it - thus
allowing for a double-unlock to occur. Fix the error return to
not happen until after the lock has been re-acquired.
Fixes#9615
Signed-off-by: Matthew Heon <mheon@redhat.com>
Traditionally, the path resolution for containers has been resolved on
the *host*; relative to the container's mount point or relative to
specified bind mounts or volumes.
While this works nicely for non-running containers, it poses a problem
for running ones. In that case, certain kinds of mounts (e.g., tmpfs)
will not resolve correctly. A tmpfs is held in memory and hence cannot
be resolved relatively to the container's mount point. A copy operation
will succeed but the data will not show up inside the container.
To support these kinds of mounts, we need to join the *running*
container's mount namespace (and PID namespace) when copying.
Note that this change implies moving the copy and stat logic into
`libpod` since we need to keep the container locked to avoid race
conditions. The immediate benefit is that all logic is now inside
`libpod`; the code isn't scattered anymore.
Further note that Docker does not support copying to tmpfs mounts.
Tests have been extended to cover *both* path resolutions for running
and created containers. New tests have been added to exercise the
tmpfs-mount case.
For the record: Some tests could be improved by using `start -a` instead
of a start-exec sequence. Unfortunately, `start -a` is flaky in the CI
which forced me to use the more expensive start-exec option.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Make sure to pass the cni interface descriptions to cni teardowns.
Otherwise cni cannot find the correct cache files because the
interface name might not match the networks. This can only happen
when network disconnect was used.
Fixes#9602
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Server, bindings, and CLI all now pull version information from version
package.
* Current /libpod API version slaved to podman/libpod Version
* Bindings validate against libpod API Minimal version
* Remove pkg/bindings/bindings.go and updated tests
Fixes: #9207
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Fixes: https://github.com/containers/podman/issues/9582
This PR also adds tests to make sure SELinux labels match the runtime,
or if init is specified works with the correct label.
Add tests for selinux kvm/init labels
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Some log tests were duplicated, and some didn't need to be repeated for
every driver. Also, added some comments
Signed-off-by: Ashley Cui <acui@redhat.com>
Move the core of renaming logic into the DB. This guarantees a
lot more atomicity than we have right now (our current solution,
removing the container from the DB and re-creating it, is *VERY*
not atomic and prone to leaving a corrupted state behind if
things go wrong. Moving things into the DB allows us to remove
most, but not all, of this - there's still a potential scenario
where the c/storage rename fails but the Podman rename succeeds,
and we end up with a mismatched state.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
