socat can create a dummy PTY that we can manipulate. This
lets us run a variety of tests that we couldn't before,
involving "run -it", and stty, and even "load" with no args.
Signed-off-by: Ed Santiago <santiago@redhat.com>
If you are attempting to run a container in interactive mode, and want
a --tty, then there must be a terminal in use.
Docker exits right away when a user specifies to use a --interactive and
--TTY but the stdin is not a tty.
Currently podman will pull the image and then fail much later.
Podman will continue to run but will print an warning message.
Discussion in : https://github.com/containers/podman/issues/8916
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Checking for 'skip.*[0-9]{4,5}', and checking status on said
issues, finds several that have been closed. Let's see if
they're really fixed.
Signed-off-by: Ed Santiago <santiago@redhat.com>
* Remove orphaned code
* Add meaningful error from LoadImageFromSingleImageArchive() when
heuristic fails to determine payload format
* Correct swagger to output correct types and headers
Signed-off-by: Jhon Honce <jhonce@redhat.com>
- cp test: clean up stray image
- build test: add workaround for #9567 (ultra-slow ubuntu).
We're seeing CI flakes (timeouts) due to ubuntu 2004 being
absurdly slow. Workaround: double our timeout on one specific
test when ubuntu + remote.
- build test: clean up new copy-from test (from #9275).
The test was copy-pasted from buildah system tests, without
really adapting for podman environment (e.g. it was using
images that we don't use here, and would cause pulls, which
will cause flakes). Rewrite test so it references only $IMAGE,
remove some confusing/unnecessary stuff, selectively run
parts of it even when rootless or remote, and add a
test to confirm that copy-from succeeded.
- load test: add error-message test to new load-invalid (#9672).
Basically, make sure the command fails for the right reason.
- play test (kube): use $IMAGE, not alpine; and add pause-image
cleanup to teardown()
- apiv2 mounts test: add a maintainability comment in a tricky
section of code; and tighten up the mount point test.
Signed-off-by: Ed Santiago <santiago@redhat.com>
podman gating tests are hanging in the new Fedora CI setup;
long and tedious investigation suggests that 'socat' processes
are being left unkilled, which then causes BATS to hang when
it (presumably) runs a final 'wait' in its end cleanup.
The two principal changes are to exec socat in a subshell
with fd3 closed, and to pkill its child processes before
killing the process itself. I don't know if both are needed.
The pkill definitely is; the exec may just be superstition.
Since I've wasted more than a day of PTO time on this, I'm
okay with a little superstition. What I do know is that with
these two changes, my reproducer fails to reproduce in over
one hour of trying (normally it fails within 5 minutes).
AND, update: only rawhide (f35) leaves stray socat processes
behind. f33 and ubuntu do not, so 'pkill -P' fails.
I really have no idea what's going on.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Currently we were overwrapping error returned from removal
of a non existing container.
$ podman rm bogus -f
Error: failed to evict container: "": failed to find container "bogus" in state: no container with name or ID bogus found: no such container
Removal of wraps gets us to.
./bin/podman rm bogus -f
Error: no container with name or ID "bogus" found: no such container
Finally also added quotes around container name to help make it standout
when you get an error, currently it gets lost in the error.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When copying from a container, make sure to evaluate the symlinks
correctly. Add tests copying a symlinked directory from a running and
a non-running container to execute both path-resolution paths.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Copy is full of perils. Some of them are the nuances when copying
directories. Who would have thought that
* cp dir foo
* cp dir/ foo
* cp dir/. foo
are all supposed to yield the same result when foo does not exist.
`podman cp` now supports all three notations, which required to massage
the front-end code in `cmd/podman` a bit. The tests have been extended
and partially rewritten to test container->host and host->container
copy operations.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Make sure the files are chowned to the host/container user, depending on
where things are being copied to.
Fixes: #9626
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Traditionally, the path resolution for containers has been resolved on
the *host*; relative to the container's mount point or relative to
specified bind mounts or volumes.
While this works nicely for non-running containers, it poses a problem
for running ones. In that case, certain kinds of mounts (e.g., tmpfs)
will not resolve correctly. A tmpfs is held in memory and hence cannot
be resolved relatively to the container's mount point. A copy operation
will succeed but the data will not show up inside the container.
To support these kinds of mounts, we need to join the *running*
container's mount namespace (and PID namespace) when copying.
Note that this change implies moving the copy and stat logic into
`libpod` since we need to keep the container locked to avoid race
conditions. The immediate benefit is that all logic is now inside
`libpod`; the code isn't scattered anymore.
Further note that Docker does not support copying to tmpfs mounts.
Tests have been extended to cover *both* path resolutions for running
and created containers. New tests have been added to exercise the
tmpfs-mount case.
For the record: Some tests could be improved by using `start -a` instead
of a start-exec sequence. Unfortunately, `start -a` is flaky in the CI
which forced me to use the more expensive start-exec option.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Fixes: https://github.com/containers/podman/issues/9582
This PR also adds tests to make sure SELinux labels match the runtime,
or if init is specified works with the correct label.
Add tests for selinux kvm/init labels
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
buildah now supports running under emulation[1] as well as
creating manifests. Use those features to create a multiarch
testimage that can be used to test podman on other arches.
[1] on Fedora 33, this requires the qemu-user-static package
We also build a new :00000001 image, replacing :00000000,
because (sigh) some tests try to run 'true' in the container.
Include instructions on building said image.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Initial validation of using podman-in-podman to create an
old-podman root, then use new-podman to play with the
containers created therein.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Since commit d54478d8ea, a container's lock is released before
attempting to stop it via the OCI runtime. This opened the window
for various kinds of race conditions. One of them led to #9479 where
the removal+cleanup sequences of a `run --rm` session overlapped with
`rm -af`. Make both execution paths more robust by handling the case of
an already removed container.
Fixes: #9479
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
/dev/stdin should not be treated as "-" to remain compatible with Docker
and to have a more consistent and idiomatic interface.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
/dev/stdout should not be treated as "-" to remain compatible with
Docker and to have a more consistent and idiomatic interface.
Fixes: #9362
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Make sure to treat "." and "/." correctly. Both cases imply to copy the
contents of a directory in contrast to the directory. This implies to
unset the KeepDirectoryNames options of the copiah package.
Previously, the code was performing a simple string suffix check which
is not enough since it would match files and directories ending with
".".
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Make sure that Podman's default OCI runtime is passed to Buildah in
`podman build`. In theory, Podman and Buildah should use the same
defaults but the projects move at different speeds and it turns out
we caused a regression in v3.0.
Fixes: #9365
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Fixes: https://github.com/containers/podman/issues/9290
Currently we still have hard coded --isolation=chroot for podman-remote build.
Implement missing arguments for podman build
Implements
--jobs, --disable-compression, --excludes
Fixes:
MaxPullPushRetries
RetryDuration
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add the SECRET keyword to the shell completion test. Also update the
use line for podman secret create to use `NAME` instead of `SECRET`.
This matches the other commands such as network/volume create.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
When resolving the workdir of a container, we may need to create unless
the user set it explicitly on the command line. Otherwise, we just do a
presence check. Unfortunately, there was a missing return that lead us
to fall through into attempting to create and chown the workdir. That
caused a regression when running on a read-only root fs.
Fixes: #9230
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This actually tests conmon, not podman; but that's the whole
point of system tests in the first place: if a problem exists,
we want to fail loudly, no matter whose fault it is.
(I can't get this to fail on my f33 laptop; OP on #9096 claims
it only fails on Ubuntu. We'll see what happens in CI).
Signed-off-by: Ed Santiago <santiago@redhat.com>
This reverts commit 15caebfe56.
The previous behaviour of `--pull` to *always* attempt to pull the image
and error out if the pull failed aligns with Docker. Since Podman aims
at feature parity with Docker, the `--pull` behaviour must match.
Fixes: #9134
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The `--pull` flag should be using the "pull if newer" pull policy rather
than "pull always". This aligns with what the help message states, what
Buildah does and, according to #9111, what was done before,
Also add a test to prevent future regressions.
Fixes: #9111
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Change API Handlers to use the same functions that the
local podman uses.
At the same time:
Cleanup and pass proper bindings. Remove cli options from
podman-remote push. Cleanup manifest push.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
