The expectation with --cgroups=disabled is that the current cgroup is
used by the container.
Currently the --cgroups=disabled is passed directly to the OCI
runtime, but it doesn't stop Podman from creating a new cgroup when it
doesn't own the current one.
Closes: https://github.com/containers/podman/issues/20910
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Use the configuration parameters from the newly introduced
PodmanshConfig struct. This allows podmansh to be configured via
configuration files.
Signed-off-by: phoenix <felix.niederwanger@suse.com>
The function that's handing us events will return an error after closing
the channel over which it's sending events, and its caller (in its own
goroutine) will then send that error over another channel.
The logic that started the goroutine is likely to notice that the events
channel is closed before noticing that the error channel has a result
for it to read, so any error that would have been communicated would be
lost.
When we finish reading events, check if the reader returned an error
before telling our caller that there was no error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
This is something Docker does, and we did not do until now. Most
difficult/annoying part was the REST API, where I did not really
want to modify the struct being sent, so I made the new restart
policy parameters query parameters instead.
Testing was also a bit annoying, because testing restart policy
always is.
Signed-off-by: Matt Heon <mheon@redhat.com>
The logic here is more complex than I would like, largely due to
the behavior of `podman inspect` for running containers. When a
container is running, `podman inspect` will source as much as
possible from the OCI spec used to run that container, to grab
up-to-date information on things like devices. We don't want to
change this, it's definitely the right behavior, but it does make
updating a running container inconvenient: we have to rewrite the
OCI spec as part of the update to make sure that `podman inspect`
will read the correct resource limits.
Also, make update emit events. Docker does it, we should as well.
Signed-off-by: Matt Heon <mheon@redhat.com>
Docker shows exposed ports as just PORT/PROTO so match that behavior. It
is not clear to me why someone needs that information in ps as "expose"
doesn't effect anything networking related.
Fixes https://issues.redhat.com/browse/RHEL-32154
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Contains a breaking change but also besides this renovate is not able to
update the import paths so this needs to be done by hand.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we remove with --force we do not return a error if the input does
not exists, however if we get more than on input we must try to remove
all and not just NOP out and not remove anything just because one arg
did not exists.
Also make the code simpler for commands that do have the --ignore option
and just make --force imply --ignore which reduces the ugly error
handling.
Fixes#21529
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Windows is not guaranteed to have the SSH feature installed, so prefer the use
of the built-in ssh client for all operations other than podman machine ssh,
which requires terminal pty logic. This restores previous behavior in 4.x.
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
Follow up to 493179be45 which only fixed the issue on the server despite
me trying to fix it on the client as well, with this change here we
always correctly unset the default on the remote client as the
root/rootless status will be wrong.
This means it is enough for users to either have a new server or client
with the bug fix which should make the update process easier.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
I am really not sure why the caller even should have the option to set
this. We should always use the correct isolation type based on the
privileges the server runs under never the client. podman-remote build
seems to send the default based on its local privs which was wrong as
well. To fix this I also changed the client to send the default if the
isolation flag is not set.
Fixes#22109
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We need to take another lock to prevent concurrent starts from different
machines.
I manually tested it by starting three VM in parallel with:
podman machine start & podman machine start test1 & podman machine start test2
I also added a CI test that seems to work as expected (failed with the
old binary, worked with the new)
Before this patch I was able to start more than VM, with this patch it
now only starts one of them and the other ones will fail to start with
a proper error.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Move the writes into the shim level to make sure they happen while we
hold the machine lock to prevent any race conditions reading/writing the
file.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
First make sure we check that a given VM exist when holding the VM lock
for it. The check in cmd/podman/machine/init.go is a nice quick out but
not enough to ensure that 2 processes to not create the same VM at the
same time. The only way to ensure this is by holding the lock and
checking if the VM config file exists.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Make sure we only update the machine config when we are locked.
While it doesn't make a functional differnce for cpu and memory it was a
problem for disk size. The disk size must be larger than the previous
one so we must have accurate data on the previous value.
Thus change the settings only while locked and refresh the config so we
have the current up to date values.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Commit 03f6589f3 added basic support for pull-error event from libimage
but it contains several problems:
1. storing the error as error type prevents it from being unmarshalled,
thus change it to a string
2. the error was never propagated from the libimage event to the podman
event struct
3. the error message was not wired into the cli and API
This commit fixes these problems.
Fixes#21458
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
For podman machine init, deprecate the --image-path option for --image.
--image now accepts the correct image from containers.conf
Also, add the ability to specify an OCI image from the --image flag using the docker:// transport.
Signed-off-by: Ashley Cui <acui@redhat.com>
Add a --artifact flag to `podman manifest add` which can be used to
create an artifact manifest for one or more files and attach it to a
manifest list. Corresponding --artifact-type, --artifact-config-type,
--artifact-config, --artifact-layer-type, --artifact-subject, and
--artifact-exclude-titles options can be used to fine-tune the fields in
the artifact manifest that don't refer to the files themselves.
Add a --index option to `podman manifest annotate` that will cause
values passed to the --annotation flag to be applied to the manifest
list as a whole instead of to an entry in the list.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Previously, the locks were on the provider layer, which doesn't make a vm operation with a config file update atomic. Move them up a layer, so the entire function locks while doing provider and config operations.
This adds a Remove and a Set function to the shim layer.
[NO NEW TESTS NEEDED] Unsure how to test this
Signed-off-by: Ashley Cui <acui@redhat.com>
Like docker podman network inspect should output the information of
running container with their ip/mac address on this network.
However the output format is not docker compatible as this cannot
include all the info we have and the previous output was already not
compatible so this is not new.
New example output:
```
[
{
...
"containers": {
"7c0d295779cee4a6db7adc07a99e635909413a390eeab9f951edbc4aac406bf1": {
"name": "c2",
"interfaces": {
"eth0": {
"subnets": [
{
"ipnet": "10.89.0.4/24",
"gateway": "10.89.0.1"
},
{
"ipnet": "fda3:b4da:da1e:7e9d::4/64",
"gateway": "fda3:b4da:da1e:7e9d::1"
}
],
"mac_address": "1a:bd:ca:ea:4b:3a"
}
}
},
"b17c6651ae6d9cc7d5825968e01d6b1e67f44460bb0c140bcc32bd9d436ac11d": {
"name": "c1",
"interfaces": {
"eth0": {
"subnets": [
{
"ipnet": "10.89.0.3/24",
"gateway": "10.89.0.1"
},
{
"ipnet": "fda3:b4da:da1e:7e9d::3/64",
"gateway": "fda3:b4da:da1e:7e9d::1"
}
],
"mac_address": "f6:50:e6:22:d9:55"
}
}
}
}
}
]
```
Fixes#14126
Fixes https://issues.redhat.com/browse/RHEL-3153
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
