Since networks must always be read from the db bucket directly we should
unset them in config to avoid caller from accidentally using them.
I already tried this but it didn't work because the networks were unset
after the config was marshalled.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When a container is run in the host network namespace we have to keep
the same resolv.conf content and not use the systemd-resolve detection
logic.
But also make sure we still allow --dns options.
Fixes#14055
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The files /etc/hosts, /etc/hostname and /etc/resolv.conf should always
be owned by the root user in the container. This worked correct for
/etc/hostname and /etc/hosts but not for /etc/resolv.conf.
A container run with --userns keep-id would have the reolv.conf file
owned by the current container user which is wrong.
Consolidate some common code in a new helper function to make the code more
cleaner.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
It solves a race where a container cleanup process launched because of
the container process exiting normally would hang.
It also solves a problem when running as rootless on cgroup v1 since
it is not possible to force pids.max = 1 on conmon to limit spawning
the cleanup process.
Partially copied from https://github.com/containers/podman/pull/13403
Related to: https://github.com/containers/podman/issues/14057
[NO NEW TESTS NEEDED] it doesn't add any new functionality
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
`pod.CgroupPath()` currently includes a codepath that is never accessed,
which is supposed to start the infra ctr and obtain the cgroup path from there
that is never necessary/safe because p.state.CgroupPath is never empty
[NO NEW TESTS NEEDED]
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
add a new option to completely disable xfs quota usage for a volume.
xfs quota set on a volume, even just for tracking disk usage, can
cause weird errors if the volume is later re-used by a container with
a different quota projid. More specifically, link(2) and rename(2)
might fail with EXDEV if the source file has a projid that is
different from the parent directory.
To prevent such kind of issues, the volume should be created
beforehand with `podman volume create -o o=noquota $ID`
Closes: https://github.com/containers/podman/issues/14049
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The linter ensures a common code style.
- use switch/case instead of else if
- use if instead of switch/case for single case statement
- add space between comment and text
- detect the use of defer with os.Exit()
- use short form var += "..." instead of var = var + "..."
- detect problems with append()
```
newSlice := append(orgSlice, val)
```
This could lead to nasty bugs because the orgSlice will be changed in
place if it has enough capacity too hold the new elements. Thus we
newSlice might not be a copy.
Of course most of the changes are just cosmetic and do not cause any
logic errors but I think it is a good idea to enforce a common style.
This should help maintainability.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Based on WSL2 9p support: remaps windows paths to /mnt/<drive> locations for
both podman and Docker API clients.
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
This reverts commit cc3790f332.
We can't change rootful to rootfull because `rootful` is written into the machine config. Changing this will break json unmarshalling, which will break existing machines.
[NO NEW TESTS NEEDED]
Signed-off-by: Ashley Cui <acui@redhat.com>
SHA-1 is prone to collisions.
This will likely break connectivity between old containers started
before update and containers started after update. It will also fail to
cleanup old netns. A reboot will fix this, so a reboot is recommended
after update.
[NO NEW TESTS NEEDED]
Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
golint, scopelint and interfacer are deprecated. golint is replaced by
revive. This linter is better because it will also check for our error
style: `error strings should not be capitalized or end with punctuation or a newline`
scopelint is replaced by exportloopref (already endabled)
interfacer has no replacement but I do not think this linter is
important.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we connect or disconnect from a network we also have to update
/etc/hosts to ensure we only have valid entries in there.
This also fixes problems with docker-compose since this makes use of
network connect/disconnect.
Fixes#12533
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we lookup the hostname for a given container we have to check if
the container is joined to another utsns and use this hostname then
instead.
This fixes a problem where the `hostname` command would use the correct
name but /etc/hostname would contain a different name.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Use the new logic from c/common to create the hosts file. This will help
to better allign the hosts files between buildah and podman.
Also this fixes several bugs:
- remove host entries when container is stopped and has a netNsCtr
- add entries for containers in a pod
- do not duplicate entries in the hosts file
- use the correct slirp ip when an userns is used
Features:
- configure host.containers.internal entry in containers.conf
- configure base hosts file in containers.conf
Fixes#12003Fixes#13224
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We are inconsistent on the name, we should stick with rootfull.
[NO NEW TESTS NEEDED] Existing tests should handle this and no tests for
machines exists yet.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
It seems this breaks older version of `podman-remote` users hence it
looks like this patch would be a better candidate for podman `5.0`
Problem
* Client with `4.0` cannot interact with a server of `4.1`
Plan this patch for podman `5.0`
This reverts commit 0cebd158b6.
Signed-off-by: Aditya R <arajan@redhat.com>
Update the recent events-log changes to fix the build error.
[NO NEW TESTS NEEDED] since there's no functional change.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
This is an enhancement proposal for the checkpoint / restore feature of
Podman that enables container migration across multiple systems with
standard image distribution infrastructure.
A new option `--create-image <image>` has been added to the
`podman container checkpoint` command. This option tells Podman to
create a container image. This is a standard image with a single layer,
tar archive, that that contains all checkpoint files. This is similar to
the current approach with checkpoint `--export`/`--import`.
This image can be pushed to a container registry and pulled on a
different system. It can also be exported locally with `podman image
save` and inspected with `podman inspect`. Inspecting the image would
display additional information about the host and the versions of
Podman, criu, crun/runc, kernel, etc.
`podman container restore` has also been extended to support image
name or ID as input.
Suggested-by: Adrian Reber <areber@redhat.com>
Signed-off-by: Radostin Stoyanov <radostin@redhat.com>
We already have ipv6 enabled as default via the containers.conf setting.
However the documentation did not reflect this. Also if no options were
set in contianers.conf it would have ipv6 disabled.
We can now remove the extra option from containers.conf.
Also fix another outdated option description for host.containers.internal
and add that the options can also be set in contianers.conf.
[NO NEW TESTS NEEDED]
Fixes#13914
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add new functions to logfile.go for rotating and truncating
the events log file once the log file and its contents
exceed the maximum size limit while keeping 50% of the
log file's content
Also add tests to verify log rotation and truncation
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
--tail=1 is not working f you restart a container with journald logging.
We see the exit status and then call into the logging a second time
causing all of the logs to print.
Removing the tail log on exited seems to fix the problem.
Fixes: https://github.com/containers/podman/issues/13098
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
`--mount` should allow setting driver specific options using
`volume-opt` when `type=volume` is set.
This ensures parity with docker's `volume-opt`.
Signed-off-by: Aditya R <arajan@redhat.com>
Convert container entrypoint from string to an array inorder to make
sure there is parity between `podman inspect` and `docker inspect`
Signed-off-by: Aditya R <arajan@redhat.com>
