This reverts commit d633824a95.
The issue has been fixed in commit 9a0c0b2eef and I have not seen it
since so remove this special case.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Found in debian testing where by default there are no unqualified search
registries installed. As such the test failed as the FIXME said. Now
there is no need for the test to assume anything.
Instead set our own config via CONTAINERS_REGISTRIES_CONF then we can
do exact matches, except that env was not read in the shell completion
code so move some code around to make it read the var in the same way as
podman login/logout.
Signed-off-by: Paul Holzinger <git@holzinger.dev>
Debug for #23913, I though if we have no idea which process is nuking
the volume then we need to figure this out. As there is no reproducer
we can (ab)use the cleanup tracer. Simply trace all unlink syscalls to
see which process deletes our special named volume. Given the volume
name is used as path on the fs and is deleted on volume rm we should
know exactly which process deleted it the next time hopefully.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add 'ci:parallel' tags to a few easy places. And, two
small easily-reviewed safename or random-port additions.
These have been working fine in #23275. I want to stop
carrying them there so I can work on simplifying my PR.
Signed-off-by: Ed Santiago <santiago@redhat.com>
This test is by far the slowest one taking over minute, the reason is
that it is checking every single podman command for shell completions.
The test is useful but it does not need to check the "..." argument 3
times. Test a second time to make sure not only the first arg is
completed. This change makes it about 15 seconds faster.
Long term we should get this test out of the main system tests together
with other cli only tests as they do not need to run on each OS, etc...
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
**podman compose** is a thin wrapper around an external compose provider
such as docker-compose or podman-compose. This means that `podman
compose` is executing another tool that implements the compose
functionality but sets up the environment in a way to let the compose
provider communicate transparently with the local Podman socket. The
specified options as well the command and argument are passed directly
to the compose provider.
The default compose providers are `docker-compose` and `podman-compose`.
If installed, `docker-compose` takes precedence since it is the original
implementation of the Compose specification and is widely used on the
supported platforms (i.e., Linux, Mac OS, Windows).
If you want to change the default behavior or have a custom installation
path for your provider of choice, please change the `compose_provider`
field in `containers.conf(5)`. You may also set the
`PODMAN_COMPOSE_PROVIDER` environment variable.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
When we do path completion in images a user could try to complete a
simple relative path, e.g. podman run $IMAGE e... should complete to etc
if this path exists in the image. Right now we panic in this case as the
current check didn't account for an empty string in simplePathJoinUnix().
In such a case return the path directly because we can not alter what
the user typed on the cli and must return a path without slash as well
in order for the shell to suggest the completion.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=2209809
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When you try to complete a path which exists and it is a file the
completion logic did not check the parent dir for other matching file
names. To fix that we have to check if the current completion is not a
dir and use the parent dir in this case.
See the updated test for an example why this is required.
Also make sure directories are correctly completed, the shell always
adds the "/" as suffix to signal the user that this path is a directory.
In this case we do not want to automatically add a space. When the path
is a regular file we want the space after the suggestion since there is
nothing more to complete.
This better matches the normal default shell completion.
The test were changed to not assume any particular ordering since this
is irrelevant for the shell completion script and there is no guarantee
about the ordering.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add shell completion for paths inside the container or image. Currently
podman run IMAGE [TAB] only uses the default shell completion which
suggests paths on the host. This is fine for some cases but often the
user wants a path which only exists in the image/container.
This commits adds support for that. Both podman create/run can now
complete the paths from the image, podman cp ctr:... now completes paths
from the actual container.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Problem: the system test 'is()' checker was poorly thought out.
For example, there is no way to check for inequality or for
absence of a substring.
Solution, step 1: introduce new assert(), copied almost verbatim
from buildah, where it has been successful in addressing the
gaps in is().
The logical next step is to search the tests for 'die' and
for 'run', looking for negative assertions which we can
replace with assert(). There were a lot, and in the process
I found a number of ugly bugs in the tests themselves. I've
taken the liberty of fixing these.
Important note: at this time we have both assert() and is().
Replacing all instances of is() would be impossible to review.
Signed-off-by: Ed Santiago <santiago@redhat.com>
e2e tests:
* remove two FIXMEs:
* one of them is expected behavior, not a FIXME
* the other is easily fixed
* File issue #12521 for a real podman-remote bug, and
update the Skip() message
system tests:
* in command-completion test, clean up stray podman-pause image
(followup to #12322, in which I missed this instance). This
removes distracting warnings from test logs.
Signed-off-by: Ed Santiago <santiago@redhat.com>
This should fix the SELinux issue we are seeing with talking to
/run/systemd/private.
Fixes: https://github.com/containers/podman/issues/12362
Also unset the XDG_RUNTIME_DIR if set, since we don't know when running
as a service if this will cause issue.s
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add --time flag to podman container rm
Add --time flag to podman pod rm
Add --time flag to podman volume rm
Add --time flag to podman network rm
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The shell completion should only suggest arguments that work. Using a
image without tag does not work in many cases. Having both the version
with and without tag also forces users to press one key more because
tab completion will always stop at the colon.
Fixes#11673
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add the SECRET keyword to the shell completion test. Also update the
use line for podman secret create to use `NAME` instead of `SECRET`.
This matches the other commands such as network/volume create.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Tracking down a CI failure earlier today, I was slightly
delayed by the absence of context information in a test
failure. This PR adds full command context to each
subtest, making it much easier for the developer to
narrow down the cause of a failure.
Signed-off-by: Ed Santiago <santiago@redhat.com>
There exists a unit test to ensure that shell completion functions are
defined. However there was no check about the quality of the provided
shell completions. Lets change that.
The idea is to create a general test that makes sure we are suggesting
containers,pods,images... for the correct commands. This works by
reading the command use line and checking for each arg if we provide
the correct suggestions for this arg.
It includes the following tests:
- flag suggestions if [options] is set
- container, pod, image, network, volume, registry completion
- path completion for the appropriate arg KEYWORDS (`PATH`,`CONTEXT`,etc.)
- no completion if there are no args
- completion for more than one arg if it ends with `...]`
The test does not cover completion values for flags and not every arg KEYWORD
is supported. This is still a huge improvement and covers most use cases.
This test spotted several inconsistencies between the completion and the
command use line. All of them have been adjusted to make the test pass.
The biggest advantage is that the completions always match the latest
command changes. So if someone changes the arguments for a command this
ensures that the completions must be adjusted.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
