Fix man page to document podman push --format fully.
Also found that push was not handling the tlsverify so fixed this.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Remove bindings that are not handled over the API.
Leaving this one to not use image pull, since this would
break progress handling. We should revisit this in the
future.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Change API Handlers to use the same functions that the
local podman uses.
At the same time:
Cleanup and pass proper bindings. Remove cli options from
podman-remote push. Cleanup manifest push.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently podman implements --override-arch and --overide-os
But Podman has made these aliases for --arch and --os. No
reason to have to specify --override, since it is clear what
the user intends.
Currently if the user specifies an --override-arch field but the
image was previously pulled for a different Arch, podman run uses
the different arch. This PR also fixes this issue.
Fixes: https://github.com/containers/podman/issues/8001
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
It turns out an options was added to container exists so it makes sense
to have pods and container exists calls have an optional structure for
options.
Signed-off-by: baude <bbaude@redhat.com>
When doing a podman images, manifests lists look just like images, so
it is logical that users would assume that they can just podman push them
to a registry. The problem is we throw out weird errors when this happens
and users need to somehow figure out this is a manifest list rather then
an image, and frankly the user will not understand the difference.
This PR will make podman push just do the right thing, by failing over and
attempting to push the manifest if it fails to push the image.
Fix up handling of manifest push
Protocol should bring back a digest string, which can either be
printed or stored in a file.
We should not reimplement the manifest push setup code in the tunnel
code but take advantage of the api path, to make sure remote and local
work the same way.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add a `.generate-bindings` make target that only runs in the absence of
the `.generate-bindings` file or when a `types.go` file below
`pkg/bindings` has changed.
This will regenerate the go bindings and make sure the code is up2date.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
1.) podman cannot send proper dockerfile when it is not inside root
folder.
2.) support for sending symlinks and folders inside context dir
3.) when sending context dir as tar to remote, prevent sending items
inside .dockerignore
Signed-off-by: Kazım SARIKAYA <kazimsarikaya@sanaldiyar.com>
This change adds code to report the reclaimed space after a prune.
Reclaimed space from volumes, images, and containers is recorded
during the prune call in a PruneReport struct. These structs are
collected into a slice during a system prune and processed afterwards
to calculate the total reclaimed space.
Closes#8658
Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
Begin the migration of the image bindings for podman 3.0. this includes
the use of options for each binding. build was intentionally not
converted as I believe it needs more discussion before migration.
specifically, the build options themselves.
also noteworthly is that the remove image and remove images bindings
were merged into one. the remove images (or batch remove) has one
downside in that the errors return no longer adhere to http return
codes. this should be discussed and reimplemented in subsequent code.
Signed-off-by: baude <bbaude@redhat.com>
this is step one of refactoring our golang binaries. we will no be
using structs to pass optional options. required options will still
arguments to the binding itself.
the structs then have a generator to create helper functions which
should then be added to the git repo.
Signed-off-by: baude <bbaude@redhat.com>
* Fix misspelled parameter
* add http-proxy support for builds
http_proxy must be set in the podman.service unit file, for example
Environment=http_proxy=<value>
Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Refactor auth pkg to support X-Registry-Config
* Refactor build endpoint to support X-Registry-Config. Supports:
* --creds
* --authfile
* Added X-Reference-Id Header to http.Request to support log event
correlation
* Log headers from http.Request
Signed-off-by: Jhon Honce <jhonce@redhat.com>
id is the last image id from the set of id's returned via the images
stanza.
id may be deprecated in a future version of the API
Created test_rest_v2_0_0.py to reflect the bump in the API Version.
Fixes#7686
Signed-off-by: Jhon Honce <jhonce@redhat.com>
podman and podman-remote do not exactly match as the lower layer code
checks if the output is destined for a TTY before creating the progress
bars. A future PR for containers/images could change this behavior.
Fixes#7543
Tested with:
$ (echo '# start'; podman-remote pull nginx ) 2>&1 | ts '[%Y-%m-%d %H:%M:%.S]'
$ (echo '# start'; podman pull nginx ) 2>&1 | ts '[%Y-%m-%d %H:%M:%.S]'
Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Refactor/Rename channel.WriteCloser() to encapsulate the channel
* Refactor build endpoint to "live" stream buildah output channels
over API rather then buffering output
* Refactor bindings/tunnel build because endpoint changes
* building tar file now in bindings rather then depending on
caller
* Cleanup initiating extra image engine
* Remove setting fields to zero values (less noise in code)
* Update tests to support remote builds
Fixes#7136Fixes#7137
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Support loading and saving tarballs with more than one image.
Add a new `/libpod/images/export` endpoint to the rest API to
allow for exporting/saving multiple images into an archive.
Note that a non-release version of containers/image is vendored.
A release version must be vendored before cutting a new Podman
release. We force the containers/image version via a replace in
the go.mod file; this way go won't try to match the versions.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
address problem when multiple -t were sent. and rework remote build's tarball if a context dir is given other than ".".
Fixes: #6578Fixes: #6577
Signed-off-by: Brent Baude <bbaude@redhat.com>
* Support the `X-Registry-Auth` http-request header.
* The content of the header is a base64 encoded JSON payload which can
either be a single auth config or a map of auth configs (user+pw or
token) with the corresponding registries being the keys. Vanilla
Docker, projectatomic Docker and the bindings are transparantly
supported.
* Add a hidden `--registries-conf` flag. Buildah exposes the same
flag, mostly for testing purposes.
* Do all credential parsing in the client (i.e., `cmd/podman`) pass
the username and password in the backend instead of unparsed
credentials.
* Add a `pkg/auth` which handles most of the heavy lifting.
* Go through the authentication-handling code of most commands, bindings
and endpoints. Migrate them to the new code and fix issues as seen.
A final evaluation and more tests is still required *after* this
change.
* The manifest-push endpoint is missing certain parameters and should
use the ABI function instead. Adding auth-support isn't really
possible without these parts working.
* The container commands and endpoints (i.e., create and run) have not
been changed yet. The APIs don't yet account for the authfile.
* Add authentication tests to `pkg/bindings`.
Fixes: #6384
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
this is a very basic implementation of build. some of the more advanced options need to be included still as well. i think the endpoints for compat and libpod will have to split given buildahs more advanced set of options. that should probably be done by someone more experienced with build internals.
Signed-off-by: Brent Baude <bbaude@redhat.com>
the endpoint for single image removal (on the libpod side) should be as follows:
versionedPath/libpod/images/IMAGENAME
The DELETE method then signifies the removal of the image.
Fixes: #6261
Signed-off-by: Brent Baude <bbaude@redhat.com>
Continue the refactoring of image removal. I didn't manage to break all
the following changes into smaller and easier to digest commits due to
time constraints:
* Return an error slice instead of a single error. Use multierror only
in the client/frontend. Reflect that in the types.
* Use the batch image removal in the client while preserving the more
rest-idiomatic single-image removal endpoint.
* Add a new handler for the single-image removal endpoint to make it
share the same code as the batch endpoint.
* Expose bindings for the single and batch endpoints, so we can
properly test them.
* Add several convenience functions for error handling to
pkg/errorhandling.
* Set the correct error type in libpod to set the exit code to 2 when
one or more containers are using an image.
* Massage the bindings tests a bit and tackle compilation errors.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Change the logic in the options from tls-verify to skipping
verification. It require a constant brain yoga to translate
from doing verification (CLI logic) to skipping it (c/image logic).
As the code is using c/image, let's make it consistent.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Fix --tls-verify parsing and make the associated options reflect the
correct logic. Other commands are affected as well but will be fixed
later.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
A surprisingly big change. A core problem was that `podman inspect`
allows for passing containers AND images with the default `--type=all`.
This only worked partially as the data was processed in isolation which
caused various issues (e.g., two separate outputs instead of one) but it
also caused issues regarding error handling.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
While this commit was initially meant to fix#5847, it has turned into a
bigger refactoring which I did not manage to break into smaller pieces:
* Fix#5847 by refactoring the image-removal logic.
* Make the api handler for image-removal use the ABI code. This way,
both (i.e., ABI and Tunnel) end up using the same code. Achieving
this code share required to move some code around to prevent circular
dependencies.
* Everything in pkg/api (excluding pkg/api/types) must now only be
accessed from code using `ABISupport`.
* Avoid imports from entities on handlers to prevent circular
dependencies.
* Move `podman system service` logic into `cmd` to prevent circular
dependencies - it depends on pkg/api.
* Also remove the build header from infra/abi files. It will otherwise
confuse swagger and other tools; errors we cannot fix as go doesn't
expose a build-tag env variable.
Fixes: #5847
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Basic port of V1 podman image tree ID
TODO: Refactor to return tree from service and format in presentation
layer
TODO: Support tunneling mode
Signed-off-by: Jhon Honce <jhonce@redhat.com>
