Support two new wait conditions, "healthy" and "unhealthy". This
further paves the way for integrating sdnotify with health checks which
is currently being tracked in #6160.
Fixes: #13627
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
First: fix podman-registry script so it preserves the initial $PODMAN,
so all subsequent invocations of ps, logs, and stop will use the
same binary and arguments. Until now we've handled this by requiring
that our caller manage $PODMAN (and keep it the same), but that's
just wrong.
Next, simplify the golang interface: move the $PODMAN setting into
registry.go, instead of requiring e2e callers to set it. (This
could use some work: the local/remote conditional is icky).
IMPORTANT: To prevent registry.go from using the wrong podman binary,
the Start() call is gone. Only StartWithOptions() is valid now.
And, minor cleanup: comments, and add an actual error-message check
Reason for this PR is a recurring flake, #18355, whose multiple
failure modes I truly can't understand. I don't think this PR
is going to fix it, but this is still necessary work.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Fixes: https://github.com/containers/podman/issues/18239
[NO NEW TESTS NEEDED]
@test "podman build -f test" in test/system/070-build.bats
Will test this. This was passing when run on a local system since
the remote end was using the clients path to read the Containerfile
The issue is it would not work in a podman machine since the
Containerfile would/should be a different path.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Enable the --configmap flag for the remote case of podman
kube play. Users can pass in the paths to the configmap files
for kube play to use when creating the pods and containers from
a kube yaml file. The configmap file is read and the contents are
appended to the contents of the main yaml file before passed to the
remote client.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
We have a spacial logic to create a better user error that hints at
podman machine, however because we string matched it missed the case of
the ssh connection.
Stop doing string comparison and return a proper error and match it with
errors.As()
[NO NEW TESTS NEEDED]
see https://github.com/containers/podman/discussions/18426
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The remote API will wait 300s by default before conmon will call the
cleanup. In the meantime when you inspect an exec session started with
ExecStart() (so not attached) and it did exit we do not know that. If
a caller inspects it they think it is still running. To prevent this we
should sync the session based on the exec pid and update the state
accordingly.
For a reproducer see the test in this commit or the issue.
Fixes#18424
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
In case of no `platform` , bindings should not add `platform` to
parameters at all instead it adds `/` as platform string which is
invalid.
[NO NEW TESTS NEEDED]
Exsiting test should pass with new buildah from upstream.
Closes: https://github.com/containers/buildah/issues/4768
Signed-off-by: Aditya R <arajan@redhat.com>
Wire in support for writing the digest of the pushed image to a
user-specified file. Requires some massaging of _internal_ APIs
and the extension of the push endpoint to integrate the raw manifest
(i.e., in bytes) in the stream.
Closes: #18216
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The Report will be used in a future change as a new return value for the
internal Push API.
Note: this change is only breaking internal APIs while user-facing
external ones remain unchanges.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
If Pull() fails, which it does on registry or network flakes,
bail out early: there's no point in continuing. Same with
Save() and restoreImageFromCache(), although those are
unlikely to fail.
Possibly better solution: retry with backoff. Left as exercise
for future maintainer.
Use Expect() for failure checks, and correct two existing
instances of Printf()/Exit() to also use Expect().
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add the command along with the abi and tunnel support
Add e2e tests
Add man page
Add apiv2 test to ensure return codes
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
The podman kube generate command can now generate a
Deployment kind when the --ype flag is set to deployment.
By default, a Pod spec will be generated if --type flag is
not set.
Add --replicas flag to kube generate to allow users to set
the value of replicas in the generated yaml when generating a
Deployment kind.
Add e2e and minikube tests for this feature.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
When we searching any image at a container registry,
--cert-dir and --creds could be required
as well as push, pull, etc.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Add a way to keep play kube running in the foreground and terminating all pods
after receiving a a SIGINT or SIGTERM signal. The pods will also be
cleaned up after the containers in it have exited.
If an error occurrs during kube play, any resources created till the
error point will be cleane up also.
Add tests for the various scenarios.
Fixes#14522
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
This should never happen with a consistent client/server,
and we are seeing this show up with some hard-to-diagnose flakes.
So, log details about failures. After we find the cause, we might remove
this extra logging again.
[NO NEW TESTS NEEDED]
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Drop support for remote use-cases when `.containerignore` or
`.dockerignore` is a symlink pointing to arbitrary location on host.
Signed-off-by: Aditya R <arajan@redhat.com>
This is a cleaner solution and guarantees the variables
will be used before they are initialized.
[NO NEW TESTS NEEDED]
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Every podman command is paying the price for this compile even when they
don't use the Regex, this will speed up start of podman by a little.
[NO NEW TESTS NEEDED] Existing tests should catch issues.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add a new flag --publish
Remote - Pass PublishPorts as a string array
ABI - translate the string array to Ports and merge with the ports in the spec
Add e2e tests
Add option to man doc
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
podman-remote converts and sends absolute path as context when its an
emptydir by adding additional seperator however it should correctly trim
the path and not add additional seperator for such use cases.
Closes: BZ#2145054
Signed-off-by: Aditya R <arajan@redhat.com>
Bump to buildah ca578b290144 and use new `cacheTo` and `cacheFrom` API.
[NO NEW TESTS NEEDED]
[NO TESTS NEEDED]
Signed-off-by: Aditya R <arajan@redhat.com>
We should have done this much earlier, most of the times CNI networks
just mean networks so I changed this and also fixed some function
names. This should make it more clear what actually refers to CNI and
what is just general network backend stuff.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Also fix a number of duplicate words. Yet disable the new `dupword`
linter as it displays too many false positives.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add --ignore flag to the command line
Add a new parameter to the NetworkCreate interface in pkg/domain for CreateOptions
Add a new API Network CreateWithOptions in pkg/bindings
Remote API - Add a query parameter to set the ignore flag
Kube - use the IgnoreIfExists flag when creating the default network instead of handling the failure
Add e2e tests
Update man page for podman-network-create
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Just like podman-remote run users should still be able to set volumes,
of course the source must be on the server machine but this is already
the case for podman machine for example.
Fixes#16694
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This just calls GC on the local storage, which will remove any leftover
directories from previous containers that are not in the podman db anymore.
This is useful primarily for transient store mode, but can also help in
the case of an unclean shutdown.
Also adds some e2e test to ensure prune --external works.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
I found the ginkgolinter[1] by accident, this looks for not optimal
matching and suggest how to do it better.
Overall these fixes seem to be all correct and they will give much
better error messages when something fails.
Check out the repo to see what the linter reports.
[1] https://github.com/nunnatsa/ginkgolinter
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
1. proxy value from env `CONTAINER_PROXY`
2. proxy socks5 && socks5h is supported
3. the proxy dial timeout is 3s
Signed-off-by: shuai.yang <shuai.yang@mihoyo.com>
