A user could reach another user's private repository by sending a path
such as /<me>/../<victim>/config. The authorization check compares the
first path segment against the authenticated user, while the backend
object key was built from the raw, un-cleaned URL path.
Reject any non-canonical request path so the authorization segment and
the backend object key can no longer disagree.
Fixes GHSA-fqj9-69pf-6pjg
(cherry picked from commit dade21c161)
Archive entry names are attacker controlled. `rclone archive extract` stripped
only a leading `./` and then joined the entry name onto the destination
directory with `path.Join`, which collapses `..` segments. An entry such as
`../escaped.txt` extracted into `:s3:bucket/safe/prefix` therefore resolved to
`bucket/safe/escaped.txt`, outside the selected `prefix` directory - a path
traversal ("Zip Slip") attack that could create or overwrite sibling objects on
any destination remote.
Entry names are now validated before use: a leading `./` is still stripped (tar
archives created with `tar -czf archive.tar.gz .` rely on this), but any entry
with a `..` path component is rejected. Both `/` and `\` are treated as
separators when looking for `..`, as the local backend treats `\` as a path
separator on Windows.
Fixes: GHSA-4vr5-p2gc-h23p
(cherry picked from commit d11efe0d58)
S3 object keys are opaque names that may legally contain `..` segments. `serve
s3` built backend paths with `path.Join(bucket, key)`, which normalised the key
so a request such as `GET /bucket/../root-secret.txt` resolved to a file outside
the selected bucket elsewhere under the serve root. Listing prefixes and
multipart uploads were affected also.
This did not allow reading of files outside the root, but did allow reading of
files in the root which normally aren't visible; only directories are visible as
buckets normally.
Because `serve s3` maps keys to file paths it cannot represent every opaque S3
key, so rather than normalising keys (which would alias distinct keys onto one
file as well as allow traversal) it now rejects any key that is not already in
canonical path form - containing `..`, `.`, `//` or a leading or trailing slash
- with a 400 Bad Request, as MinIO does. Directory listing prefixes are
validated the same way but allow the empty bucket-root prefix and an optional
trailing slash.
Fixes: GHSA-8v25-v8p6-qf7v
(cherry picked from commit 83d1e62aa9)
The --disable-zip flag was registered manually and was missing from
OptionsInfo, so it could not be set over the rc interface. Move it
into OptionsInfo like serve webdav does, which keeps the command line
flag and also makes it settable via rc.
(cherry picked from commit 60cb844f9a)
Per RFC 4918 section 10.6, when the Overwrite header is omitted from a
COPY or MOVE request the resource MUST treat the request as if
Overwrite: T had been sent.
The upstream golang.org/x/net/webdav library mishandles this for MOVE
by checking == "T" instead of != "F", so an absent header is treated
as Overwrite: F and the request fails with 412 Precondition Failed.
Normalise the header to T in the rclone WebDAV server before
delegating to the upstream handler when the client did not send one.
This restores RFC-compliant default behaviour and can be removed once
the upstream fix in golang/go#66059 lands and the golang.org/x/net
dependency is bumped.
Fixes#9496
(cherry picked from commit cfb9a10a3d)
Seekdir handled only a rewind to offset 0 and returned ENOTSUP otherwise.
The stateless kernel NFS server opens a fresh directory handle and seeks to
the last returned cookie on every readdir continuation, so any listing
spanning more than one readdir batch failed over NFS. dirStream is a
snapshot taken at Readdir time and go-fuse assigns each entry a sequential
offset, so seeking to off positions the stream at index off; off == 0 still
resets to the start, preserving the rewind/re-read behaviour.
Before: ls of a directory that spans more than one readdir batch failed
over NFS with "Unknown error 524".
After: it lists correctly.
Adds TestDirStreamSeekdir covering rewind, mid-stream resume and the EOF
clamp. The full NFS path was validated against a real Linux
nfs-kernel-server export over NFSv3, NFSv4.0 and NFSv4.2.
Fixes#9547
(cherry picked from commit 22aba81074)
setAttr left attr.Ino unset (0) and the NewInode sites left StableAttr.Ino
unset, so the kernel saw inode 0 while the node identity differed, which
breaks NFS file-handle validation. Set both to the stable VFS inode. The
bazil cmd/mount backend does not hit this because its framework assigns
stable inodes automatically; go-fuse needs them set explicitly.
Before: chmod/chown/truncate on a just-written file through an
NFS-exported mount2 mount failed with ESTALE.
After: they succeed.
Exercising the NFS handle-validation path needs a kernel NFS server, so it
isn't covered by the local vfstest harness; validated against a real Linux
nfs-kernel-server export over NFSv3, NFSv4.0 and NFSv4.2.
#9547
(cherry picked from commit 92b78aefa4)
The kernel NFS server creates regular files with MKNOD (it
creates-then-opens, so vfs_create routes through fuse_create -> FUSE_MKNOD
when there is no open intent), but mount2 only implemented Create
(FUSE_CREATE, used by local and SMB clients). Without Mknod every NFS file
creation failed with ENOTSUPP. This mirrors the cmd/mount mknod handler from
#2115.
Before: touch through an NFS-exported mount2 mount failed with ENOTSUPP.
After: files create normally.
Exercising this needs a kernel NFS server, so it isn't covered by the
local vfstest harness; validated against a real Linux nfs-kernel-server
export over NFSv3, NFSv4.0 and NFSv4.2.
#9547
(cherry picked from commit 6eecd45bed)
After an upload (notably multipart) to a slow backing remote, the file
lives in the VFS and is returned by ListBucket, but node.DirEntry() stays
nil until the --vfs-write-back writeback completes. HeadObject and
GetObject returned gofakes3.KeyNotFound while it was nil, so a HEAD/GET in
that window 404'd even though the object existed.
getFileHashByte already falls back to hashing the VFS cache when the
backing object isn't available yet. Drop the early nil return, pass the
node (not the fs.Object) to getFileHashByte, and take the Content-Type
from fs.MimeTypeFromName when the backing object isn't there yet.
(cherry picked from commit 445528a3fb)
The Cobra generated PowerShell completion script captures rclone's output
through a pipeline with Invoke-Expression. PowerShell decodes that output
using [Console]::OutputEncoding, which on non-UTF-8 hosts (for example
PowerShell 5.1 on a Windows install with an OEM code page such as CP852)
misinterprets the UTF-8 bytes rclone emits and corrupts remote and path
names containing non-ASCII characters, so tab completion produces a path
that does not exist.
Inject "[Console]::OutputEncoding = [System.Text.Encoding]::UTF8" into the
generated script immediately before the Invoke-Expression call. This is safe
on PowerShell 7+, where UTF-8 is already the default. If the expected line is
not present (for example after a Cobra template change) the script is emitted
unmodified so we never produce a corrupted completion script.
(cherry picked from commit 59c86b01bb)
With cmd/mount2, reading a directory more than once returned the correct
entries on the first read but nothing on subsequent reads. Plain `ls`
triggers this: it does lseek(fd, 0, SEEK_SET) to rewind the directory
before a second getdents.
go-fuse v2.9.0 rewinds a directory stream by calling Seekdir on the
FileSeekdirer interface. dirStream did not implement it, so go-fuse
returned ENOTSUP and produced an empty listing on every read after the
first.
This implements Seekdir on dirStream: a rewind to offset 0 resets the
stream to the start, restoring correct listings on re-read. Non-zero
offsets are uncommon for in-memory listings and still return ENOTSUP,
matching go-fuse's own default. A compile-time interface assertion is
added so signature drift on future go-fuse updates is caught at build
time.
Before: second and subsequent reads of a directory returned no entries.
After: directories list correctly on every read.
See: https://github.com/hanwen/go-fuse/issues/549
Co-authored-by: Nick Craig-Wood <nick@craig-wood.com>
The SFTP serve handler ignored the size attribute of SETSTAT/FSETSTAT
requests, only acting on the modification time. This meant a client
asking to truncate a file (eg setting the final size of an upload, or
an explicit truncate) had no effect at all.
This respects the size attribute (if present) by truncating the file
to the requested size.
The SFTP serve write handler always opened files with O_TRUNC,
ignoring the flags requested in the SFTP OPEN packet. Some clients
(notably WinSCP's "Process in Background", which resumes an upload on
a second connection) re-open the partially written file without the
truncate flag and continue writing from the offset they had reached,
relying on the existing data being preserved. Forcing O_TRUNC zeroed
that prefix, so the start of the uploaded file ended up as a block of
zero bytes.
This fix respects the requested open flags instead so a resume open
without truncate keeps the already written data intact.
See: https://forum.rclone.org/t/rclone-serve-sftp-winscp-background-mode-uploading-causes-file-corruption/53841
Before this change, --conflict-loser pathname assumed --conflict-resolve none,
following the legacy behavior prior to v1.66. This produced unexpected behavior
when used with a different --conflict-resolve option.
This change fixes the issue by ensuring that --conflict-loser pathname looks for
the correct name on the side not being renamed, when only one side should be
renamed.
https://forum.rclone.org/t/bisync-does-not-copy-the-winner-file-to-the-loser-site/53768
The S3 ListObjects response from `rclone serve s3` was sorting object
contents by modification time instead of object key. This made the
listing order incompatible with S3 clients which expect lexicographic
key ordering.
In particular, `aws s3 sync` assumes both source and destination
iterators are ordered by key. With the old modtime ordering it could
misidentify files as missing or outdated and re-download objects that
were already up to date.
Change the pager to sort returned objects by key and add a regression
test which uses keys and modtimes arranged so the old behaviour would
fail.
Fixes#9002
Previously `make fetch-gui` extracted the GUI release into cmd/gui/dist/
and the unpacked tree was embedded uncompressed via `//go:embed dist`.
This commits and embeds the GUI bundle (dist.zip) and its release tag
(dist.tag) to the repo so:
- the rclone binary is smaller
- `go build` works on a fresh clone without first running fetch-gui
- a given commit pins an exact GUI version
The "Fetch GUI" step was removed from .github/workflows/build.yml.
On Windows, passing "*" as mountPoint to the mount/mount RC command
auto-assigns a drive letter (e.g. "Z:"), but the resolved letter was
never propagated back to mountlib. This caused liveMounts to be keyed
on the literal "*", breaking tracking of multiple mounts and making
unmount unreliable.
Change MountFn to return the actual mount point as an additional
return value. Update MountPoint.Mount() to store the resolved value,
and mountRc() to use it as the liveMounts key. The mount/mount RC
response now returns the actual mountPoint so callers can discover
which drive letter was assigned.
Samsung TVs have a bug where they duplicate file extensions when both
the title contains an extension and the MIME type indicates the same
file type. For example, "photo.jpg" becomes "photo.jpg.jpg".
Remove extensions from <dc:title> while keeping them in the resource URL
and MIME type. This provides a cleaner display and prevents Samsung TVs
from incorrectly "fixing" what they perceive as missing extensions.
Samsung TVs have strict XML parsers that fail to interpret "
(numeric quote entity) correctly within DIDL-Lite metadata, causing
files to appear as empty folders. By replacing " with "
(named quote entity) in all marshaled XML, Samsung TVs can now
properly parse the metadata and display files.
This handles the "Big 5" XML entities that might cause parsing issues:
- " -> " (double quotes)
- ' -> ' (apostrophes)
- & -> & (ampersands)
- < -> < (less than)
- > -> > (greater than)
While Go's xml.Marshal already uses named entities for &, <, >
characters, this ensures complete protection against any edge cases
where numeric entities might be generated. Samsung TVs are known
to have strict XML parsers that can't handle numeric entities.
Fixes#9346
Samsung TVs sometimes send Browse requests with empty ObjectID
parameters (<ObjectID></ObjectID>) which causes DLNA servers to
return errors. Default empty ObjectID to "0" (root container) to
maintain compatibility.
This fix is based on ReadyMedia/MiniDLNA Bug 311 which documented
the same issue and solution for Samsung TVs.
See #9346
Add xmlns:sec="http://www.sec.co.kr/" namespace to DIDL-Lite responses
as required by Samsung TV DLNA implementations. This namespace is used
by working DLNA servers like MediaBrowser/Emby for Samsung compatibility.
Based on research of open source DLNA servers that successfully work
with Samsung TVs.
See #9346
Containers (directories) never had their Date field set, producing
<dc:date>0001-01-01</dc:date> (Go's zero time) in DIDL-Lite metadata.
This invalid date can confuse strict DLNA clients.
Set the dc:date to the directory's modification time, and as a safety
net, omit the dc:date element entirely when the timestamp is zero.
See #9346
The childCount attribute on DLNA containers was hardcoded to 1
regardless of how many items the directory actually contained. Some
DLNA clients (notably Samsung TVs) use childCount to decide whether
to browse into a container. Report the actual number of directory
entries instead.
See #9346
Samsung TVs are strict DLNA clients that expect SOAP response arguments
in the order defined by the service SCPD (Service Control Protocol
Description). The Browse response was using a Go map which produces
random iteration order, causing arguments like Result, NumberReturned,
TotalMatches, and UpdateID to appear in unpredictable order. Samsung TVs
fail to parse such responses and never proceed to browse directory
children, showing "no content" to the user.
Replace the map[string]string return type with an ordered []soapArg
slice throughout the UPnPService.Handle() interface, ensuring response
arguments always appear in SCPD-defined order.
See #9346
Replace AuthRequired bool with NoAuth bool on the rc.Call struct and
flip the auth check logic. Previously endpoints were unauthenticated
by default and had to opt in with AuthRequired: true, which led to
security vulnerabilities when developers forgot to set the flag.
Now all endpoints require authentication by default. Only explicitly
safe read-only endpoints are marked with NoAuth: true:
- rc/noop
- rc/error
- rc/list
- core/version
- core/stats
- core/group-list
- core/transferred
- core/du
- cache/stats
- vfs/list
- vfs/stats
- vfs/queue
- job/status
- job/list
See GHSA-25qr-6mpr-f7qx, GHSA-jfwf-28xr-xw6q
The files.com integration tests for rcat/copyurl were failing because
fs/account.Account was declaring a ReadAt method when the underlying
handle did not support it. The files.com SDK decided to use the ReadAt
method to speed transfers up which failed.
ReadAt and Seek methods were added in this commit to support the
archive command:
409dc75328 accounting: add io.Seeker/io.ReaderAt support to accounting.Account
This fixes the problem by adding new methods to the Account object
WithSeeker/WithReaderAt/WithReadAtSeeker which produce an object with
the desired methods or errors if it isn't possible.
This stops Account advertising things it can't do which is bad Go
practice.
The temp directory name used random.String(2) giving only 676 possible
values. When multiple concurrent tests started in the same second, they
shared the same timestamp prefix, causing name collisions and shared
temp directories. This led to lock file conflicts, listing file races,
and file deletion errors.
Increase to random.String(8) to make collisions effectively impossible.
Add a ctx parameter to vfs.New() so callers can pass in context
carrying ConfigInfo and FilterInfo. The context is stripped of
cancellation but config and filter values are preserved into a fresh
background context.
The flag.Lookup("test.v") check existed to skip opening a browser
during tests, but the tests don't exercise RunE, so this was never
used. The --no-open-browser flag is sufficient on its own.
Bind the RC server to localhost:0 and read the bound URL back via a
new rcserver.Server.URLs() accessor instead of pre-allocating a port
in cmd/gui. This removes the small TOCTOU race window between
freePort() closing its listener and rcserver claiming the same port.
- Fail gracefully if `make fetch-gui` hasn't been run
- Return errors instead of panic or fatal errrors
- Don't run `make fetch-gui` on every make since we have it in the workflow
This adds a new gui command which runs an embedded copy of the GUI at
https://github.com/rclone/rclone-web/
The GUI release is fetched as part of the CI build.
Lockfiles with invalid JSON content caused bisync to fail permanently
because lockFileIsExpired() logged the decode error but still fell
through to the "valid lock file" path with zero-value TimeExpires.
Now when a JSON decode error is detected:
- If --max-lock is set (< basicallyforever): treat garbled lockfile as
expired, mark listings failed, and proceed (safe assumption: the
previous bisync run crashed and left garbage).
- If --max-lock is not set (default): log a clear error telling the
user the lockfile needs manual inspection, and return false.
This adds 11 previously-missing rc params for newer bisync features.
It also makes optional parameters truly optional. (Previously, callers were
required to supply every single one, even if using the default value.)
Add gzip compression for directory listings and text assets served over HTTP.
This reduces the rclone repository file listing from 40 kB to 8 kB and reduces
the rclone MANUAL.txt from 2.7 MB to 700 kB.
This makes listings and assets served across the network load faster.
The compression level of 5 should be a good balance between size and speed.
