# Hardware tested with rtl_433 rtl_433 is known to work with or tested with the following SDR hardware: ## RTL-SDR Actively tested and supported are Realtek RTL2832 based DVB dongles (and other similar devices supported by RTL-SDR). See also [RTL-SDR](https://github.com/osmocom/rtl-sdr/). ## SoapySDR Actively tested and supported are - [LimeSDR USB](https://www.crowdsupply.com/lime-micro/limesdr) - [LimeSDR mini](https://www.crowdsupply.com/lime-micro/limesdr-mini) - [LimeNet Micro](https://www.crowdsupply.com/lime-micro/limenet-micro) - [PlutoSDR](https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/adalm-pluto.html) - [SDRplay](https://www.sdrplay.com/) (RSP1A tested) - [HackRF One](https://greatscottgadgets.com/hackrf/) (reported, we don't have a receiver) - [SoapyRemote](https://github.com/pothosware/SoapyRemote/wiki) LimeSDR and LimeNet engineering samples were kindly provided by [MyriadRf](https://myriadrf.org/). See also [SoapySDR](https://github.com/pothosware/SoapySDR/). ## Not supported - Ultra cheap 1-bit (OOK) receivers, and antenna-on-a-raspi-pin - CC1101, and alike special purpose / non general SDR chips