This adds testcontrol support for expiring individual node keys,
in order to enable test scenarios involving to key-expiry and
extension.
Updates #19326
Signed-off-by: Gesa Stupperich <gesa@tailscale.com>
This adds a fake vnet ACME service, TXT-backed SetDNS support, and a
VM test that fetches a certificate with tailscale cert, serves it with
tailscale serve, and verifies HTTPS from a second node.
This adds coverage motivated by #19915.
Updates #13038
Change-Id: Ie1e53409509337d81c8fbceb63f59f3dfbd48207
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously, sharding required tests to opt in by calling tstest.Shard,
which used a process-global counter to assign each test to a shard.
This had two problems: most tests didn't call it, so they ran on every
shard (defeating the purpose), and shard assignments were unstable
(depended on call order, so adding a test could reshuffle others).
Remove tstest.Shard and tstest.SkipOnUnshardedCI entirely. Instead,
have testwrapper implement sharding automatically for all tests: when
TS_TEST_SHARD=N/M is set, it uses "go list -json" (no compilation) to
find test source files, scans them for top-level Test/Benchmark/
Example/Fuzz function names, and filters by fnv32a(name) % M == N-1.
The filtered names are passed as an anchored -run regex to go test.
Using go list instead of "go test -list" avoids linking the test binary
twice (Go's build cache does not cache test binary linking).
Fixes#19886
Change-Id: I62ab7b3d757324d4c5fd0b5de50c1e3742681791
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Some tests in another repo were broken by tailscale/tailscale#19607.
This fixes them, by finishing off the rest of the migration away from
netmap.NetworkMap on the IPN bus in containerboot.
Containerboot used to rebuild a full NetworkMap-shaped view while
reacting to IPN bus notifications. Now it insteads has its own
netmapState type (immutable) of exactly what it needs to track, and
sends those immutable values around, making cheap edits of new
immutable values when an IPN bus edit arrives.
This should make cmd/containerboot scale to much larger tailnets now too.
Fixes#19852Fixestailscale/corp#42347
Updates #12542
Change-Id: I88adaf061f85f677f954a764935e6654329d75a6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There are two places where tailscaled transitions into a paused state:
1. tailscaled’s controlclient is initially created,
2. tailscale down, or the GUI equivalent, commands it to.
This patch unifies the implementation of both scenarios into
LocalBackend.shouldPauseControlClientLocked to prevent the
implementation from drifting.
The flaky tstest/integration.TestNoControlConnWhenDown test exposed
this mismatch, but only by accident. This patch also changes
TestNode.MustDown so that it runs `tailscale down` and then waits for
the testcontrol server to finish handling any associated /machine/map
requests.
Fixes#19831
Signed-off-by: Simon Law <sfllaw@tailscale.com>
For large tailnets (~50k+ nodes) with frequent peer churn (ephemeral
GitHub Actions workers etc.), tailscaled used to rebuild the full
netmap and fan it out on the IPN bus on every MapResponse that
added or removed a peer. There were two O(N) costs per delta: the
full netmap rebuild + every Notify.NetMap encode to every bus watcher.
This change tackles both:
1. Plumb O(1) peer add/remove through the delta path. PeersChanged
and PeersRemoved no longer prevent the delta happy path; instead,
they mutate the per-node-backend peer map in place.
2. Restrict ipn.Notify.NetMap emission to the platforms whose host
GUIs still depend on it (Windows, macOS, iOS) and migrate
in-tree consumers off it everywhere else:
- Migrate reactive consumers (containerboot, kube agents,
sniproxy, tsconsensus, etc.) off Notify.NetMap to the
previously-added Notify.SelfChange signal so they no longer
have to subscribe to the full netmap.
- Add ipn.NotifyNoNetMap so GUI clients on "legacy-emit" platforms
that have already migrated can opt out of the per-watcher
NetMap encode.
- Gate Notify.NetMap emission on the producer side by a compile-
time GOOS check, so the supporting code is dead-code-eliminated
on Linux and other geese where no GUI consumer needs it.
Re-running BenchmarkGiantTailnet from tstest/largetailnet, which was
added along with baseline numbers on unmodified main in ad5436af0d,
the per-delta cost (one peer add+remove pair) is now ~O(1) regardless
of tailnet size N:
N no-watcher (ms/op) bus-watcher (ms/op)
before now factor before now factor
10000 32 0.11 300x 166 0.13 1300x
50000 222 0.11 2000x 865 0.13 6700x
100000 504 0.12 4100x 1765 0.13 13400x
250000 1551 0.12 12500x 4696 0.15 32400x
Updates #12542
Change-Id: I94e34b37331d1a8ec74c299deffadf4d061fda9e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
serveMap cloned s.nodes[nk], mutated the clone outside the mutex,
then wrote it back via updateNodeLocked. A concurrent UpdateNode,
SetNodeCapMap, or other writer landing between the clone and the
writeback would be silently clobbered. Mutate the live node under
the mutex instead.
Surfaces in tsnet's TestListenService as a flaky ErrUntaggedServiceHost
panic: the test calls control.UpdateNode to attach a tag, a concurrent
updateRoutine map request from the host races, and the host's next
netmap arrives with Tags=[].
Updates #19822
Change-Id: I6c5ebd5e5bf79a40316f53f627157230773cb469
Signed-off-by: James Tucker <james@tailscale.com>
Add Go tests that drive a real headless Chromium (via chromedp) against
the built cmd/tsconnect/pkg/ artifact and verify the @tailscale/connect
public API surface end-to-end. The package has not been republished in
three years, in part because no test exercises the produced artifact at
runtime — only tsc --noEmit and a Go build run in CI.
TestCreateIPN loads pkg.js into the browser, calls createIPN with a junk
auth key, and asserts that pkg.createIPN / pkg.runSSHSession are
functions and that createIPN() returns an IPN with the documented
run/login/logout/ssh/fetch methods. No control-plane traffic.
TestFetchTailnetPeer stands up a full local tailnet (testcontrol +
DERP + a tsnet.Server peer) and verifies that the browser-side WASM
client can join over WebSocket-noise to the same control, connect to
DERP over WSS, and then ipn.fetch() an HTTP service hosted on the tsnet
peer through the tailnet. The test asserts the response body matches a
known string. Browser state transitions are logged: NoState -> NeedsLogin
-> Starting -> Running.
Tests are opt-in via --run-headless-browser-tests (matching the existing
--run-vm-tests pattern in tstest/natlab/vmtest) so they never fire in
casual `go test ./...` runs. When the flag is set, a test is skipped if
cmd/tsconnect/pkg/ has not been built, and fails with t.Error if no
chromium binary is found on $PATH (honoring $CHROME_BIN as an override).
findChromium also falls back to /Applications/Google Chrome.app and
/Applications/Chromium.app on darwin, since macOS Chrome's executable
lives inside an .app bundle and is not on $PATH by default. The
.github/workflows/test.yml wasm job is extended to install
google-chrome-stable and run the tests with the flag after build-pkg.
To prevent silently testing a stale pkg/main.wasm (built from an older
checkout than the rest of the test invocation), build-pkg now writes
pkg/build-info.json recording the sha256 of the raw (pre-wasm-opt)
go-build output. The test does its own `go build` of
cmd/tsconnect/wasm with the same -tags/-trimpath/-ldflags (factored
into a new cmd/tsconnect/wasmbuild package shared by both call sites)
and t.Fatalfs with a "rebuild" instruction on mismatch. Cost is
near-zero because the Go build cache from the prior build-pkg makes
the rebuild a cache hit.
The new wasmbuild package also replaces cmd/tsconnect's hardcoded -tags
string with a minimal-feature-set computation. wasmbuild.Keep names the
small set of feature/featuretags entries the browser client actually
needs (netstack, logtail, dns, health, c2n, ipnbus); wasmbuild.Tags()
emits a ts_omit_<f> for every other
omittable feature in feature/featuretags.Features, with transitive deps
expanded via featuretags.Requires. An init() panics if Keep references
a feature unknown to feature/featuretags so a rename there fails
loudly. Net effect on size: 32M raw / 9.4M brotli before this change,
25M raw / 4.4M brotli after — vs the last-published 1.39.98 at 21M /
3.8M. The transitive package-import graph is unchanged (176
tailscale.com/* packages either way): featuretags omits eliminate
dead code via `const HasX = false`, not imports. Trimming the import
graph would require a separate, larger refactor splitting interface
packages by build tag.
Writing TestFetchTailnetPeer surfaced several real issues, all fixed
here:
* cmd/tsconnect built the wasm with the nethttpomithttp2 tag, but
control/ts2021 (since commit 1d93bdce2, "control/controlclient:
remove x/net/http2, use net/http", Oct 2025) requires HTTP/2 from
net/http's bundled implementation. With nethttpomithttp2 set, the
bundle is excluded and the wasm client cannot speak HTTP/2 to any
control plane, including production. Drop the tag. Wasm size grows
~1 MB raw / ~300 KB brotli (more than offset by the feature
pruning above). The last published @tailscale/connect (1.39.98,
early 2023) pre-dates the regression, which is why no consumer has
reported the breakage.
* tstest/integration/testcontrol.Server's /ts2021 noise upgrade
endpoint rejected anything but POST. WebSocket clients (the only
transport available to browser-WASM) come in as GET. Allow both;
the controlhttp AcceptHTTP path dispatches on the Upgrade header,
so the websocket library still enforces GET for WS upgrades.
This matches production, where the same controlhttpserver.AcceptHTTP
routes purely on the Upgrade header without checking method.
* derp/derphttp's urlString built the DERP URL from node.HostName
only, dropping node.DERPPort. Non-WS clients use a separate code
path (connectToHost) that honors DERPPort, but WebSocket-only
clients (browser-WASM) went through urlString and so could not
reach a DERP running on any port other than 443. Include the port
when it differs from the scheme default.
Also move addWebSocketSupport from cmd/derper (where it was main-only)
to derp/derpserver.AddWebSocketSupport so tstest/integration.RunDERPAndSTUN
can wrap its DERP handler with WebSocket support — without that, the
test DERP would not accept the browser's wss connection.
Fixes#9394
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: Iff9cdee303e3b239924249b5bffb2fd04e02f391
Instead of having two entry points for running natlab tests, start
converting the connectivity tests to use the vmtest framework.
Grid and pair tests have yet to be moved over.
Updates #13038
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
For testing the loading of netmap cache from disk, the cache needs to
exist. The simple solution is to start two nodes and connect them to
control, with the netmap caching capability set. Then cut the connection
to control, restart the nodes, and ping between them.
This tests that we can start from a cache and get to running state, but
also that we are able to establish a connection between the nodes.
For now this is not testing how the nodes are able to talk to each other
(DERP vs direct).
Updates #19597
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
The test was flaky under stress with "AddRawMapResponse N: node not
connected" failures. The root cause was in testcontrol's addDebugMessage:
it conflated "no streaming poll registered" with "wake-up channel buffer
momentarily full". The single-slot updatesCh is just a lossy wake-up
signal, but the streaming serveMap loop has fast paths
(takeRawMapMessage and the hasPendingRawMapMessage continue) that don't
drain it. A stale notification could remain buffered, causing the next
sendUpdate to fail even though msgToSend had been queued and the
streaming poll would still pick it up.
Detect the real failure case (no streaming poll) by checking
s.updates[nodeID] directly, and treat sendUpdate's buffer-full result as
benign — the message is in msgToSend, which is the source of truth.
Also plumb an optional *health.Tracker through tsp.ClientOpts to the
underlying ts2021.Client and supply one in the tests, eliminating the
"## WARNING: (non-fatal) nil health.Tracker (being strict in CI)" stack
dumps emitted by controlhttp.(*Dialer).forceNoise443 under CI.
Fixes#19583
Change-Id: Ib2334376585e8d6562f000a0b71dea0117acb0ff
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add a vmtest that brings up two gokrazy nodes A and B behind two
One2OneNAT networks (so direct UDP works in both directions and any
slowness can't be blamed on NAT traversal), establishes a WireGuard
tunnel A → B with TSMP, then rotates B's disco key four times and
asserts that the data plane recovers in both directions after each
rotation. All pings are TSMP (the data-plane ping; disco pings would
not exercise the WireGuard tunnel itself).
The five pings:
1. A → B (initial; brings up the tunnel; 30s budget)
2. B → A after rotate (LocalAPI rotate-disco-key debug action)
3. A → B after rotate (LocalAPI)
4. B → A after restart (SIGKILL; gokrazy supervisor respawns)
5. A → B after restart (SIGKILL)
Each post-rotation ping gets a 15-second budget. Two unavoidable
multi-second waits dominate today:
- The rotate-then-a→b phase takes ~10s on main because of LazyWG.
After B's WantRunning bounce, B's wgengine resets its
sentActivityAt/recvActivityAt maps and trims A out of the
wireguard-go config as an "idle peer"; B only re-adds A on
inbound activity, by which point A's first few TSMP packets
have been silently dropped at B's tundev. The
bradfitz/rm_lazy_wg branch removes that trimming entirely
(verified locally: this phase drops to <100ms there).
- The restart phases take ~5s for wireguard-go's RekeyTimeout
handshake retry. After SIGKILL+respawn the first WG handshake
init from the restarted node sometimes goes into the void
(likely the brief peer-removed window in the receiver's
two-step maybeReconfigWireguardLocked reconfig during which
the peer is absent from wireguard-go), and wg-go's 5s+jitter
retransmit timer is the next opportunity to retry. That retry
succeeds and the staged TSMP packet flushes. Intrinsic to the
protocol's retransmit policy.
Once LazyWG is removed and the first-handshake-after-reconfig race
is fixed, the budget should drop to 5s.
Supporting changes:
ipn/ipnlocal: DebugRotateDiscoKey now toggles WantRunning off and
back on after rotating the disco key. magicsock.Conn.RotateDiscoKey
only resets local disco state; without also dropping wireguard-go
session keys, peers keep encrypting with their stale per-peer
session against us until their rekey timer fires (WireGuard has no
data-plane signaling to invalidate sessions). Bouncing WantRunning
runs the engine through Reconfig(empty) → authReconfig, which
drops every peer's WG session so the next packet either way
triggers a fresh handshake.
ipn/ipnlocal, ipn/localapi: add a debug-only "peer-disco-keys"
LocalAPI action ([LocalBackend.DebugPeerDiscoKeys]) that returns
a map[NodePublic]DiscoPublic from the current netmap. Tests reach
it via [local.Client.DebugResultJSON]. We do not surface disco
keys via [ipnstate.PeerStatus] because adding a non-comparable
[key.DiscoPublic] field there breaks reflect-based test helpers
(e.g. TestFilterFormatAndSortExitNodes' use of cmp.Diff), and
general LocalAPI clients have no need for disco keys. Since the
debug LocalAPI is gated behind the ts_omit_debug build tag, this
endpoint is automatically stripped from small binaries.
cmd/tta: add /restart-tailscaled handler (Linux-only, via /proc walk)
to drive the SIGKILL phase. On gokrazy the supervisor respawns
tailscaled within a second.
tstest/integration/testcontrol: add Server.AllOnline. When set,
every peer entry in MapResponses is marked Online=true. Several
disco-key handling fast paths in controlclient and wgengine
(removeUnwantedDiscoUpdates, removeUnwantedDiscoUpdatesFromFull
NetmapUpdate, the wgengine tsmpLearnedDisco fast path) only fire
for online peers; without this flag, tests exercising disco-key
rotation only hit the offline-peer code paths, which mask issues
and are several seconds slower in this scenario. Finer-grained
per-node online tracking can be added later.
tstest/natlab/vmtest: add Env.RotateDiscoKey,
Env.RestartTailscaled, Env.PeerDiscoKey, Node.Name, an
[AllOnline] EnvOption that plumbs through to
testcontrol.Server.AllOnline, and an exported
Env.Ping(from, to, type, timeout). Ping replaces the unexported
helper so callers can specify both a ping type (PingDisco for
warming peer state, PingTSMP for asserting end-to-end
connectivity) and a deadline. PeerDiscoKey returns its LocalAPI
error so callers inside tstest.WaitFor can retry transient
failures rather than fataling the test.
Updates #12639
Updates #13038
Change-Id: I3644f27fc30e52990ba25a3983498cc582ddb958
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Seamless key renewal has been the default in all clients since 1.90.
We retained the ability to disable it from the control plane as a
precaution, but we haven't seen any issues that require us to disable it.
We're now removing all the code for non-seamless key renewal, because we
don't expect to turn it on again, and indeed it's been untested in the
field for three releases so might contain latent bugs!
Updates tailscale/corp#33042
Change-Id: I4b80bf07a3a50298d1c303743484169accc8844b
Signed-off-by: Alex Chan <alexc@tailscale.com>
Add a Go benchmark that exercises a single tailnet client (a [tsnet.Server]
running in the test process) against a synthetic large initial netmap and
a stream of caller-driven peer add/remove deltas, all in-process.
The harness is split in two parts:
- tstest/largetailnet, a reusable package containing a [Streamer]
that hijacks the map long-poll on a [testcontrol.Server] via the new
AltMapStream hook, sends one initial MapResponse with N synthetic
peers, and forwards caller-supplied delta MapResponses on the same
stream. Helpers like MakePeer / AllocPeer build synthetic peers with
unique IDs and addresses derived from the Tailscale ULA range.
- tstest/largetailnet/largetailnet_test.go, BenchmarkGiantTailnet
(headless tailscaled workload, no IPN bus subscriber) and
BenchmarkGiantTailnetBusWatcher (GUI-client workload with one
Notify subscriber attached). Both are gated on
--actually-test-giant-tailnet (skipped by default), stand up an
in-process testcontrol + tsnet.Server, let Up block until the
initial N-peer netmap has been processed, then ResetTimer and run
add+remove pairs via b.Loop. Per-delta sync is via a test-only
[ipnlocal.LocalBackend.AwaitNodeKeyForTest] channel that closes
once the just-added peer key appears in the netmap (no-watcher
variant) or via bus-Notify drain (bus-watcher variant).
To support the hijack, [testcontrol.Server] grows an AltMapStream hook
and a small MapStreamWriter interface for benchmarks/stress tests that
need to drive a controlled MapResponse sequence; the normal serveMap
path is untouched when AltMapStream is nil. The streamer answers
non-streaming "lite" map polls (which controlclient issues before the
streaming long-poll to push HostInfo) with an empty MapResponse and
returns immediately, so the streaming poll that follows is the one
that gets the initial netmap.
The benchmark is intended for before/after comparisons of netmap- and
delta-handling changes targeted at large tailnets. CPU profiles on
unmodified main show the expected O(N) hotspots:
setControlClientStatusLocked / authReconfigLocked /
userspaceEngine.Reconfig / setNetMapLocked, plus JSON encoding of the
full Notify.NetMap to bus watchers (which dominates the BusWatcher
variant).
Median ms/op over 10 runs on unmodified main, by tailnet size N:
N no-watcher bus-watcher
10000 32 166
50000 222 865
100000 504 1765
250000 1551 4696
Recommended invocation:
go test ./tstest/largetailnet/ -run=^$ \
-bench='BenchmarkGiantTailnet(BusWatcher)?$' \
-benchtime=2000x -timeout=10m \
--actually-test-giant-tailnet \
--giant-tailnet-n=250000 \
-cpuprofile=/tmp/giant.cpu.pprof
Updates #12542
Change-Id: I4f5b2bb271a36ba853d5a0ffe82054ef2b15c585
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The package updates started getting really slow yesterday. We can do
better, but attempt a band aid fix for now, as the test is failing about
a third of the time on PR CI.
Updates tailscale/corp#40465
Change-Id: Icf53292ba83dd1ed76b9bdf9fb94a8f6fb448c07
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
If we get a 429 response during node registration, use the `Retry-After`
header for backoff instead of the regular exponential backoff.
The rate limiter error is propagated to the user, just like other
registration errors are, e.g.
```
$ tailscale up
backend error: node registration rate limited; will retry after 57s
exit status 1
```
Updates tailscale/corp#39533
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
On some nodes (found via natlab), the existing nodes last seen could be
unset. For these cases, we would want to accept the key and write a last
seen. This was breaking the cached netmap natlab tests.
Updates #12639
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Clients with the newly added node attribute
`"disable-linux-cgnat-drop-rule"` will not automatically drop inbound
traffic on non-Tailscale network interfaces with the source IP in the
CGNAT IP range. This is an initial proof-of-concept for enabling
connectivity with off-Tailnet CGNAT endpoints.
Fixestailscale/corp#36270.
Signed-off-by: Naman Sood <mail@nsood.in>
Use linkat via /proc/self/fd with AT_SYMLINK_FOLLOW to create a
hardlink of the test binary instead of copying it. This avoids
copying ~50MB+ binaries into each test's temp directory, making
test setup faster and reducing disk I/O.
The simpler os.Link(b.Path, ret.Path) can't be used here because
the source binary lives in the first test's TempDir, which may be
cleaned up before later tests call CopyTo. The open FD keeps the
inode alive after the path is deleted, but os.Link needs a valid
path. (See also b9f468240f which tried os.Link but is racy for
this reason.)
The /proc/self/fd approach works without elevated privileges,
unlike AT_EMPTY_PATH which requires CAP_DAC_READ_SEARCH. If the
linkat fails for any reason (e.g. cross-filesystem temp dirs), it
falls back to the existing full-copy path.
Fixes#19397
Change-Id: I4b1f97f7e63a9ae9e09dce36dfbdd1f6cff92320
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When running integration tests over SSH (e.g., in remote development
environments), the SSH_CLIENT environment variable is set. This causes
isSSHOverTailscale() to incorrectly detect an SSH session and change
behavior.
Clear SSH_CLIENT in the test node environment to prevent these false
positives.
Fixes#19393
Change-Id: I1411abf0be9704cce37051476efb04d59beed386
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
The natlab-integrationtest CI job frequently flakes by exhausting its
3m go test timeout. The root cause is that the QEMU VMs run under
pure software emulation (TCG) with no KVM. Under TCG, the guest
kernel's timer calibration busy-loops are at the mercy of host CPU
scheduling. When two VMs boot simultaneously on a 2-core CI runner,
one VM's calibration gets starved and produces wrong results, leaving
the kernel with broken timers that prevent it from ever completing
boot — even after the other VM finishes and frees up CPU.
Additionally, the microvm machine type doesn't provide HPET hardware,
but the kernel command line specified clocksource=hpet. And the VM
image build (make natlab) ran inside the test itself, consuming most
of the 3m timeout budget before the actual test started.
Fix by:
- Enabling KVM when /dev/kvm is available, so timer calibration
uses real hardware timers unaffected by host CPU scheduling.
- Adding a CI step to set /dev/kvm permissions on the GitHub
Actions runner (ubuntu-latest provides KVM but needs a udev rule).
- Pre-building the VM image in a separate CI step so it doesn't
cut into the go test -timeout budget.
- Replacing the hardcoded 60s context timeout with one derived from
t.Deadline(), so the test uses the full -timeout budget.
- Adding VM boot progress detection (AwaitFirstPacket) and QMP
diagnostics, so boot failures produce clear errors instead of
opaque "context deadline exceeded" messages.
With KVM enabled, the test passes reliably even on a single CPU core
with 3 parallel workers — a scenario that was 100% broken under TCG.
Fixes#18906
Change-Id: I4c87631a9c9678d185b9f30cb05c0f7bfa9f5c62
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Start using a common helper for tests to declare that they require root.
This is step 1. A later step will then make this helper track which tests were
skipped so a subsequent pass will run these test as root.
Updates tailscale/corp#40007
Change-Id: I4979e1def0fa3691d38c83f48c89aaa443e7f62e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When SetSubnetRoutes is called, also send updatePeerChanged to all
other connected nodes so they re-fetch their MapResponse and learn
about the updated AllowedIPs. Without this, peers never see new
subnet routes until they happen to reconnect to the control server.
Discovered while working on a three-VM natlab subnet router
integration test, coming later.
Updates #13038
Change-Id: I20e7a2fda994a8ab0e7a24240e6eae536f4f5f15
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Move the ipn/desktop blank import from cmd/tailscaled/tailscaled_windows.go
into feature/condregister/maybe_desktop_sessions.go, consistent with how
all other modular features are registered. tailscaled already imports
feature/condregister, so it still gets ipn/desktop on Windows.
Updates #12614
Change-Id: I92418c4bf0e67f0ab40542e47584762ac0ffa2b2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add a new vet analyzer that checks t.Run subtest names don't contain
characters requiring quoting when re-running via "go test -run". This
enforces the style guide rule: don't use spaces or punctuation in
subtest names.
The analyzer flags:
- Direct t.Run calls with string literal names containing spaces,
regex metacharacters, quotes, or other problematic characters
- Table-driven t.Run(tt.name, ...) calls where tt ranges over a
slice/map literal with bad name field values
Also fix all 978 existing violations across 81 test files, replacing
spaces with hyphens and shortening long sentence-like names to concise
hyphenated forms.
Updates #19242
Change-Id: Ib0ad96a111bd8e764582d1d4902fe2599454ab65
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously, running `add/remove/revoke-keys` without passing any keys
would fail with an unhelpful error:
```console
$ tailscale lock revoke-keys
generation of recovery AUM failed: sending generate-recovery-aum: 500 Internal Server Error: no provided key is currently trusted
```
or
```console
$ tailscale lock revoke-keys
generation of recovery AUM failed: sending generate-recovery-aum: 500 Internal Server Error: network-lock is not active
```
Now they fail with a more useful error:
```console
$ tailscale lock revoke-keys
missing argument, expected one or more tailnet lock keys
```
Fixes#19130
Change-Id: I9d81fe2f5b92a335854e71cbc6928e7e77e537e3
Signed-off-by: Alex Chan <alexc@tailscale.com>
Before sending a fix for #18991, this adds an integration test that
locks in that the proxymap WhoIs code works with two nodes running as
different users, with the second node running a localhost service and
able to use its local tailscaled to identify a Tailscale connection
from the other tailscaled.
Updates #18991
Change-Id: I6fbb0810204d77d2ac558f0cc786b73e3248d031
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This makes tsnet apps not depend on x/crypto/ssh and locks that in with a test.
It also paves the wave for tsnet apps to opt-in to SSH support via a
blank feature import in the future.
Updates #12614
Change-Id: Ica85628f89c8f015413b074f5001b82b27c953a9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Two issues caused TestCollectPanic to flake:
1. ETXTBSY: The test exec'd the tailscaled binary directly without
going through StartDaemon/awaitTailscaledRunnable, so it lacked
the retry loop that other tests use to work around a mysterious
ETXTBSY on GitHub Actions.
2. Shared filch files: The test didn't pass --statedir or TS_LOGS_DIR,
so all parallel test instances wrote panic logs to the shared system
state directory (~/.local/share/tailscale). Concurrent runs would
clobber each other's filch log files, causing the second run to not
find the panic data from the first.
Fix both by adding awaitTailscaledRunnable before the first exec, and
passing --statedir and TS_LOGS_DIR to isolate each test's log files,
matching what StartDaemon does.
It now passes x/tools/cmd/stress.
Fixes#15865
Change-Id: If18b9acf8dbe9a986446a42c5d98de7ad8aae098
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I omitted a lot of the min/max modernizers because they didn't
result in more clear code.
Some of it's older "for x := range 123".
Also: errors.AsType, any, fmt.Appendf, etc.
Updates #18682
Change-Id: I83a451577f33877f962766a5b65ce86f7696471c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The test ping() passed the full 60s context to each PingWithOpts call,
so if the first attempt hung (DERP not yet registered), the retry loop
never reached attempt 2. Use a 2s per-call timeout instead.
Updates: #18810
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
Updating a node on a testcontrol server should trigger netmap updates to
all connected streaming clients. This was not the case previous to this
change and consequently caused race conditions in tests. It was possible
for a test to call UpdateNode and for connected nodes to never see the
update propagate.
Updates #16340Fixes#18703
Signed-off-by: Harry Harpham <harry@tailscale.com>
This switches our gokrazy builds to use a new variant of cmd/gok called
opinionated about using monorepos: https://github.com/bradfitz/monogok
And with that, we can get rid of all the go.mod files and builddir forests
under gokrazy/**.
Updates #13038
Updates gokrazy/gokrazy#361
Change-Id: I9f18fbe59b8792286abc1e563d686ea9472c622d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Two methods were recently added to the testcontrol.Server type:
AddDNSRecords and SetGlobalAppCaps. These two methods should trigger
netmap updates for all nodes connected to the Server instance, the way
that other state-change methods do (see SetNodeCapMap, for example).
This will also allow us to get rid of Server.ForceNetmapUpdate, which
was a band-aid fix to force the netmap updates which should have been
triggered by the aforementioned methods.
Fixestailscale/corp#37102
Signed-off-by: Harry Harpham <harry@tailscale.com>
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
This change allows tsnet nodes to act as Service hosts by adding a new
function, tsnet.Server.ListenService. Invoking this function will
advertise the node as a host for the Service and create a listener to
receive traffic for the Service.
Fixes#17697Fixestailscale/corp#27200
Signed-off-by: Harry Harpham <harry@tailscale.com>
This patch adds an integration test for Tailnet Lock, checking that a node can't
talk to peers in the tailnet until it becomes signed.
This patch also introduces a new package `tstest/tkatest`, which has some helpers
for constructing a mock control server that responds to TKA requests. This allows
us to reduce boilerplate in the IPN tests.
Updates tailscale/corp#33599
Signed-off-by: Alex Chan <alexc@tailscale.com>
And fix up the TestAutoUpdateDefaults integration tests as they
weren't testing reality: the DefaultAutoUpdate is supposed to only be
relevant on the first MapResponse in the stream, but the tests weren't
testing that. They were instead injecting a 2nd+ MapResponse.
This changes the test control server to add a hook to modify the first
map response, and then makes the test control when the node goes up
and down to make new map responses.
Also, the test now runs on macOS where the auto-update feature being
disabled would've previously t.Skipped the whole test.
Updates #11502
Change-Id: If2319bd1f71e108b57d79fe500b2acedbc76e1a6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
SetSubnetRoutes was not sending update notifications to nodes when their
approved routes changed, causing nodes to not fetch updated netmaps with
PrimaryRoutes populated. This resulted in TestUserMetricsRouteGauges
flaking because it waited for PrimaryRoutes to be set, which only happened
if the node happened to poll for other reasons.
Now send updateSelfChanged notification to affected nodes so they fetch
an updated netmap immediately.
Fixes#17962
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
With the introduction of node sealing, store.New fails in some cases due
to the TPM device being reset or unavailable. Currently it results in
tailscaled crashing at startup, which is not obvious to the user until
they check the logs.
Instead of crashing tailscaled at startup, start with an in-memory store
with a health warning about state initialization and a link to (future)
docs on what to do. When this health message is set, also block any
login attempts to avoid masking the problem with an ephemeral node
registration.
Updates #15830
Updates #17654
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
It's an unnecessary nuisance having it. We go out of our way to redact
it in so many places when we don't even need it there anyway.
Updates #12639
Change-Id: I5fc72e19e9cf36caeb42cf80ba430873f67167c3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
