Resolve Server.Dial and Server.HTTPClient names using the tailnet's DNS
configuration, including MagicDNS, search domains, split DNS routes, and
global resolvers. Preserve the dialer's local MagicDNS fast path.
Add Server.LookupIP for direct lookups returning netip.Addr values. Keep
the resolver implementation private to tsnet. Search expansion uses
ndots=1, includes the MagicDNS suffix when enabled, and respects trailing
dots. Each lookup uses the current DNS configuration.
Use the internal resolver before considering host fallback. Configured
upstream failures and authoritative local denials must not fall back to
the host resolver; the host's hosts file is consulted only during fallback.
Distinguish configured routes from ambient cloud-host fallback resolvers.
Cover search expansion, split and global DNS, MagicDNS-disabled operation,
configuration updates, hosts-file precedence, and dialing in tests.
Fixes#5840
Updates #7984
Updates #15260
Updates #4677
Change-Id: I832bc4c68658d2d25c5dc29b79acf611fc11e59e
Signed-off-by: James Tucker <james@tailscale.com>
Similar to #20866 for 4via6, conn25 needs to block host-scoped
destinations. Due to the similarity between the two situations, the
matching is no longer in a 4via6-specific location. Since there is no
backwards compatibility to satisfy, there is no exception list for
conn25.
ipn/ipnlocal (for 4via6) and feature/conn25 now both use the new
package.
Updates tailscale/corp#50118
Updates tailscale/corp#46169
Change-Id: Ic3f9cccd2f5823a2ca48bd78607792b0fd6d7db9
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
response when DNS request goes to PeerAPI DoH
To support feature/conn25 and other extensions or consumers needing to
know which PeerAPI node handled a DNS request, e.g. for app connectors
or exit nodes, and needing extra data from the server that can be
transmitted in the headers.
DNS responses from other upstream resolvers do not get any metadata
populated, even if those servers are DoH.
Add a new Response type in net/dns/resolver that includes the raw
response bytes and the optional metadata, and replace the bare bytes
with it in some places.
Pass this new type to to net/dns.ResponseMapper instead of the bare
bytes to the extensions can see the metadata.
Updates tailscale/corp#46169
Signed-off-by: Michael Ben-Ami <mzb@tailscale.com>
ListenSSH now documents its session trust model and takes an
authorization callback. A session is accepted from any peer that the
tailnet ACL's TCP rules allow and that resolves with WhoIs. The server
performs no SSH client authentication, does not map the peer to a local
user, and does not record the session. The application is responsible
for what each session does. Set Server.SSHAuthCallback to reject
unwanted sessions before they reach Accept. A rejected session is
refused at open with exit status 1 and is never yielded to Accept. The
callback is plumbed through LocalBackend.ListenSSH and HookListenSSH.
With no callback, behavior is unchanged.
The listener's SSH server runs session channels only, with no port
forwarding. Closing the listener closes the accepted connections.
- DisablePTYEmulation runs on every session, so a PTY session passes
data through unchanged instead of translating "\n" to "\r\n". The
translation corrupted binary data read through the net.Conn
interface. Window changes are drained for every session, even when
the application never calls Pty, because gliderssh writes window
changes from the session request loop and an undrained channel
blocks the session's requests. Pty drops window changes when the
application is not reading them.
- The handshake is bounded by TS_SSH_LOGIN_GRACE_TIME, default 120
seconds, the same as sshd's LoginGraceTime.
- TS_SSH_IDLE_TIMEOUT bounds connections with no SSH traffic. It is 0
by default, and zero applies no bound, so quiet but live sessions
are not closed by default. Both timeout knobs accept a Go duration
such as "90s" or a bare number of seconds.
- Accepted sessions wait for Accept in a bounded queue. When the queue
is full, further sessions are refused, so an application that stops
calling Accept parks only a bounded number of sessions.
Updates tailscale/corp#50380
Signed-off-by: James Tucker <james@tailscale.com>
Make link queue writes nonblocking: gVisor can generate replies on the
reader needed to drain the queue. A full queue drops only the rejected
packet and reports ErrNoBufferSpace, which gVisor counts and TCP handles
by arming its retransmit timer. UDP sockets do not see the error unless
IP_RECVERR is set, matching Linux. Count WireGuard-bound drops as
reason="queue_full" in tailscaled_outbound_dropped_packets_total, and
per-queue drops in debug and client metrics.
Add Wrapper.TryInjectOutbound for best-effort replies generated while
processing packets (TSMP rejects and pongs, conn25 rejects, fake-mode
echo replies), so those paths drop instead of stalling behind the
injection queue's reader. Its drops are also counted as queue_full.
Make outbound injection waits cancellable and close link queues before
abort-generated replies. Stop the WireGuard injection pump on ErrClosed.
Release injected packets still queued at Close, outside closeOnce to
allow reentrant release callbacks; a sender whose send races with Close
releases the packet itself. Release temporary capture buffers.
Copy injected payload views directly into the WireGuard slab, avoiding
an intermediate allocation and copy.
Test queue saturation, multiqueue progress, cancellation, concurrent
shutdown, reference ownership, fragmented payloads, and GSO.
Performance versus the parent commit, on a 4-core Xeon 6975P-C:
inject+read 64B / 1280B 245ns / 479ns -> 187ns / 195ns, 0 allocs
4 injectors, 1 reader 843ns -> 451ns
64KiB GSO inject+split 10.9us -> 4.4us, 64KiB/op -> 0
link queue write+read 81.4ns -> 81.5ns
tsnet TCP, 1 / 8 streams 448 / 580 MB/s -> 492 / 674 MB/s
BenchmarkTCPQueueBottleneck shows that dropping on full queues keeps
throughput at the bottleneck rate (117 MB/s at 100k packets/s, as with
blocking writes), at the cost of more retransmits with many streams.
Fixes#21631
Updates #21638
Updates #21632
Updates #21639
Signed-off-by: James Tucker <james@tailscale.com>
Updates tailscale/corp#49775
Track authoritative NXDOMAINs for at least 60 seconds on macOS and iOS (where our short SOA ttls are not properly respected), and flush when a cached name becomes resolvable. Compile a no-op tracker elsewhere and avoid duplicate VPN reconfiguration on link changes.
A TCP retry to the server that just answered can only return the same
rcode, and when that server accepted the connection and never answered,
the query ran the full 10s dnsQueryTimeout and the client got nothing.
An upstream rcode now ends the UDP/TCP race when it arrives, and the
client gets it once every resolver has had udpRaceTimeout to answer
instead of waiting for all of them to report. tcpQueryTimeout is also
set on the conn, since a context cannot interrupt a blocked read, and a
new dns_query_fwd_udp_read_ctx_done counter separates query teardown
from upstream read errors.
Fixes#20826
Signed-off-by: Brendan Creane <bcreane@gmail.com>
The NL prefix is one of the last references to the "Network Lock" name
which we're cleaning up.
Updates tailscale/corp#37904
Change-Id: I751194e0b49447e97a65ed6975e3da680226ce85
Signed-off-by: Alex Chan <alexc@tailscale.com>
updates tailscale/corp#33007
When a selected exit node can't carry internet traffic due to a misconfiguration (wrong ID, node
deleted, routes removed, etc), blackhole default routes are installed and all internet traffic is dropped.
That is the correct behavior -- better to drop than leak to the local network -- but it was entirely silent:
the stable-ID lookup in nodeBackend.updateRouteManagerPrefs misses without a log line, and Status
leaves ExitNodeStatus nil. The user sees a healthy Tailscale with no internet. If an admin fat-fingers the
exit node name in an IT policy, for example, it's easy to break every node with zero feedback.
This adds an exit-node-unavailable health warning covering every way the selection can fail to carry
traffic (short of reachability which is a separate concern), reported via exitnodehealth.ArgExitNodeReason.
The warning names the exit node, caching its display name while it is still a peer so the name survives
its departure, and falls back to the stable ID or IP. When the selection is mandated by the ExitNodeID
or ExitNodeIP policy settings, the message tells the user to contact their network administrator instead
of suggesting they pick another exit node.
To test this, set a forced exit node policy with some random ip or node id. The warning has a 5 second
threshold. It should clear as soon as you change to a proper exit node.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Previously, ipconfig /flushdns and ipconfig /registerdns were called
from multiple sites without coordination: the DNS manager's SetDNS
(in a fire-and-forget goroutine), the router's winRouter.Set (synchronously
on every route change), the link change handler, and session unlock.
These could fire concurrently or in rapid succession, spawning multiple
ipconfig processes and putting excessive pressure on the Dnscache service.
In this PR, we introduce a new util/coalescedop.CoalescedOp type that provides
"one in-flight, at most one pending" semantics: Do() is non-blocking,
at most one execution runs at a time, and concurrent/rapid successive
requests coalesce into a single follow-up execution.
We then use CoalescedOp for both ipconfig /flushdns and ipconfig /registerdns,
replacing the fire-and-forget goroutine in windowsManager.SetDNS
and in the session unlock handler in tailscaled.
We also remove the redundant dns.Flush() call from winRouter.Set, since every
meaningful router.Set is followed by dns.Set in Reconfig, which already
flushes.
Updates #21001
Signed-off-by: Nick Khyl <nickk@tailscale.com>
* derp/derphttp: reject invalid DERP node hostname before proxy CONNECT
When a DERP client reaches a node through an HTTP(S) proxy,
dialNodeUsingProxy writes the CONNECT request by hand and puts
net.JoinHostPort(n.HostName, port) into both the request line and the
Host header. n.HostName comes from the control-supplied DERP map and
net.JoinHostPort does no sanitizing, so a hostname carrying CR/LF was
written verbatim into the plaintext request sent to the proxy. That let
whoever populated the DERP map inject extra headers, or a second
pipelined request, into the connection to the operator's proxy.
Validate n.HostName with httpguts.ValidHostHeader at the top of
dialNodeUsingProxy, before the proxy is dialed, and also reject the
empty hostname, which ValidHostHeader accepts. DNS names and IP
literals continue to work.
Add a table-driven test that runs accepted and rejected hostnames
against a fake proxy and checks the CONNECT target that goes out.
Fixestailscale/corp#48122
Signed-off-by: basavaraj-sm05 <basavaraj@digiscrypt.com>
Co-authored-by: Mike Jensen <mikej@tailscale.com>
Signed-off-by: Mike Jensen <mikej@tailscale.com>
The varz handler got its memstats_* metrics from the expvar package's
"memstats" func, which calls runtime.ReadMemStats and so stopped the
world on every Prometheus scrape. Keep the names but compute them from
runtime/metrics, and never call that func, even from
WritePrometheusExpvar.
While there, export the /tailscale/ metrics from our Go fork (stack
size histogram, stack copy counters, timer zombie counts and lifetime
histogram), which nothing could see before, plus a few upstream ones
with no MemStats equivalent: scheduling latency and GC pause
histograms, live heap, GC and total CPU seconds, thread count, and
mutex wait time. The last replaces derper's hand-rolled version.
Everything read is cheap and a scrape allocates nothing after the
first. Names use a go_runtime_ namespace rather than go_ so they can't
collide with the Prometheus Go client's collector in promvarz binaries.
The runtime's 162-bucket time histograms are reduced to one bucket per
factor of four from 256ns to 1s.
Updates #21300
Updates tailscale/go#189
Updates golang/go#75935
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I7e3c9a41f2b85d6e0c4a9b1d3f8e7c2a5b6d4e19
Adds tsweb/compserve: content negotiation for precompressed static
variants, with a transcode-to-identity fallback for clients that do not
accept an encoding (including when the raw file is absent), and
CompressWriter, which live-compresses dynamic responses with zstd in its
fastest mode, streamed incrementally with no buffering. Negotiation is
q-value and wildcard aware (gzip;q=0 previously matched gzip).
client/web serves its prebuilt embedded assets through compserve,
replacing brotli with zstd; the embedded FS is wrapped in
tsweb/vcstime for conditional-request mod times. tsweb/compserve/gzip.go
keeps transitional serving of gzip variants from pre-zstd file systems
(such as the currently published web-client-prebuilt module):
passthrough to gzip-accepting clients, transcoded to identity otherwise;
it becomes inert once a zstd-only module is published.
util/zstdframe gains pooled GetDecoder and GetStreamingEncoder
(concurrency=1). util/precompress is now a build-time tool, generating
zstd variants only. cmd/tsconnect and cmd/build-webclient consume the
new precompress/compserve split. tsweb.AcceptsEncoding and
tsweb/tswebutil are removed; negotiation lives in compserve and the
deprecated shim had no callers. go.mod bumps web-client-prebuilt.
Also fixes a transcoding bug where http.ServeContent's size probe via
the promoted zstd.Decoder.WriteTo could report a zero length, serving
empty bodies.
Updates tailscale/corp#20099
Signed-off-by: James Tucker <james@tailscale.com>
This method has been deprecated for four months; replace all uses with
the Peers or NoPeers equivalents.
Updates #12542
Change-Id: I7b5800d0d92775839dbfb6021751a5dfacc53d2f
Signed-off-by: Alex Chan <alexc@tailscale.com>
This is the output of the new misc/bumpdeps tool (#21325) run with
--exclude-newer-than-days=7, which asks proxy.golang.org for the newest
version of every direct dependency, ignoring releases younger than a
week in favor of the newest older one, and runs a single go get.
gvisor tracks its "go" branch, wireguard-go its "tailscale" branch,
and golang-x-crypto its "main" branch (the proxy's @latest for it is
a stray v0.91.0 tag from 2024 that predates our acme fork changes).
Indirect deps only moved as far as MVS pulled them.
The week-long cooldown held back gvisor, the gokrazy modules,
chromedp/cdproto, and hashicorp/raft-boltdb/v2, whose only newer
versions are days old; they'll come along next time.
Several upstream changes needed small fixes: nfpm's PrepareForPackager
takes a modification time now (a zero time keeps the old behavior of
using the source file's mtime), esbuild's ServeOptions.Port became an
int while ServeResult.Host became a Hosts slice, client-go's
EventRecorder.Eventf is now recognized by vet as a printf wrapper (so
the k8s-operator calls that passed a preformatted message switch to
Event), google/nftables v0.3.0 reads back the kernel's
NF_NAT_RANGE_PROTO_SPECIFIED flag into a new expr.NAT.Specified field
(so the port map DNAT rule now sets it too or findRule never matches
the rule it just added), and staticcheck v0.8.1 knows encoding/json/v2's
embed tag option, so the two SA5008 suppressions for it are gone.
Two tests assumed old library behavior. client-go's fake clientset now
replays existing objects when a watch starts, as a real apiserver does,
so the k8s-proxy config test must tolerate the loader ignoring that
no-op event before the real reload arrives. fyne.io/systray moved its
dbusmenu object path and answers the first GetLayout with depth 1, so
the systray test now finds the menu via the item's Menu property and
polls until the submenu entries appear.
Then make tidy, make updatedeps, and make kube-generate-all (the
controller-gen bump to v0.22.0 changes doc strings, stops listing
top-level metadata as required, and crd-ref-docs now marks optional
fields).
Updates #8043
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I3f9a2c6e8b1d4705a9e2c7b8d1f4e6a0c2b5d8e3
The tsweb DebugHandler already links to expvar, Prometheus varz, and
pprof, but the only runtime visibility beyond pprof was the handful of
runtime.MemStats fields that varz special-cases. The runtime/metrics
package has far more (GC CPU classes, scheduler latencies, stop-the-world
pause histograms, heap breakdowns, and so on) and is the runtime's
preferred, cheaper interface.
Add a /debug/runtime-metrics handler. By default it serves only an index
of metric names, kinds, and descriptions, which are static, so viewing
the page does not read any values. The index is an HTML table for
browsers (Accept: text/html) and plain text otherwise; format=html or
format=text overrides the sniffing.
Values are read only on request, always as JSON:
- /debug/runtime-metrics/gc/heap/allocs:bytes returns that metric's
bare value, handy for scripts and curl.
- /debug/runtime-metrics?name=NAME (repeatable) returns a JSON object
keyed by metric name. A trailing * matches by prefix, so name=/gc/*
returns the GC metrics and name=* returns everything.
Histograms are objects with counts and buckets arrays; infinite bucket
boundaries, which JSON cannot represent, are the strings "-Inf" and
"+Inf".
In the HTML index, exact metric names link to the bare value form, and
each run of metrics sharing a directory is headed by a row linking every
ancestor directory to its wildcard query (/gc/*, /gc/heap/*, ...).
Responses inherit the debug handler's nosniff, framing, and CSP headers,
and application/json is not a script MIME type, so the values cannot be
pulled in cross-origin as a script by a malicious page.
Like the pprof handlers, this is excluded from js/wasm builds to keep
them small.
Updates #21300
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I7c2e9f4a1b8d3e6f0a5c9b2d4e7f1a3c6b8d0e2f
TestUserMetricsByteCounters is currently our top flake at http://flakes/
The test waited for a direct path between its two localhost nodes by
polling s1's status until CurAddr was set, then asserted that the
transferred bytes appeared in the path="direct_ipv4" counters. Both
steps were flaky:
- CurAddr is only reported while magicsock has a confirmed, currently
trusted UDP address for the peer, which depends on a heartbeat ping
and CallMeMaybe cycle that can lag arbitrarily under CI load. In the
CI failure logs the transfer itself went direct and the byte counter
assertions passed; the only failure was the polling helper's
t.Error.
- On a machine where localhost has both IPv4 and IPv6, magicsock can
pick ::1 (it prefers IPv6 on latency ties), so the transfer lands in
the direct_ipv6 counters instead.
- If no direct path is established yet, the transfer goes over DERP, whose
wire-byte total (relay framing, plus TCP retransmissions inside the
tunnel under load) can exceed any fixed tolerance; one flakestress
run counted 33% more than the payload sent.
Drop the direct-path wait and the hardcoded path label, and assert the
one invariant the test actually cares about: at least the number of
bytes sent must be counted across all path counters combined. There is
deliberately no upper bound, since the counters legitimately include
overhead, retransmissions, and the duplicate copies magicsock sends on
several paths while a direct path is being confirmed.
Verified with flakestress: the old test failed within 7 runs, while the
fixed test passed 33,521 runs with no failures.
See
http://flakes/analyze-test?name=tailscale.com%2ftsnet.TestUserMetricsByteCounters
Updates #deflake
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I4d8a9bfb9549ea9d8d33d3a3b55b4d03f9b9be78
The map response reader now caps a single message at 256 MiB on the wire
and 1 GiB after zstd decompression. The server-chosen uint32 size prefix
previously let a malicious control server make us allocate up to 4 GiB
before reading any body bytes, and the decoded size was unbounded, so a
small zstd frame could expand into gigabytes of JSON. A 16 MB cap has
been hit by real production traffic before, so both limits sit far above
plausible legitimate sizes. The size-prefixed read moved into a
readMapResponseMessage helper, and the newer control/tsp path already
enforced both kinds of bounds; this brings the long-poll path it
replaces in line, with more generous limits for large tailnets.
ts2021.Client.Do additionally caps every noise response body with
httpbody.LimitSize, so a malicious or buggy control server can't make us
buffer an unbounded response. Client.Do shadows the embedded
http.Client's Do method, so register, set-dns, set-device-attr,
audit-log, all DoNoiseRequest consumers (webclient, tailnet lock, SSH
actions, id-token, feature queries), and the debug CLI get the cap
without per-call-site changes, and future noise endpoints get it for
free.
The cap lives in the new util/httpbody package so other HTTP clients can
adopt the same convention: LimitSize looks the size limit up from
res.Request's context (a Response knows the Request that produced it),
falling back to DefaultMaxSize, 1 MiB, when the context carries no
override. It is like io.LimitReader except that reads past the limit
fail with an error wrapping httpbody.ErrTooLarge instead of silently
truncating, and a body of at most the limit, including one of exactly
the limit, reads back without error: the wrapper probes for EOF once the
limit is exhausted to tell an exactly-at-limit body from an oversize
one. The per-request override, httpbody.WithMaxSize, is a context key,
so transports pick it up with no API changes; LimitSizeTo applies an
explicit limit ignoring any override. Repeated LimitSize or LimitSizeTo
calls replace the previous limit rather than compounding it, so a later
call can raise or remove the limit an earlier one set.
Responses that stream an unbounded number of individually bounded
messages disable the cap with httpbody.WithMaxSize(ctx, 0): the
/machine/map long-poll and control/tsp's map session, whose messages are
already capped per-message (by readMapResponseMessage and decodeMsg, and
by tsp's framedReader and boundedReader). Their non-200 error bodies are
not message streams, so those are capped with LimitSizeTo instead.
The tailnet lock /tka/init/begin, /tka/sync/offer and /tka/affected-sigs
responses can carry per-node key signatures or missing AUMs, which at
100,000 peers reach tens of MB, so they raise the cap to 512 MiB. The
per-response io.LimitedReader decoders that silently truncated those
responses at 1 or 10 MiB are removed: the transport cap is now the
single enforcement point, and it reports oversize bodies instead of
truncating them.
The /key fetch over plain TLS switches from io.LimitReader to
httpbody.LimitSizeTo, so an oversized response reports the problem
instead of producing a confusing truncated-JSON error.
Thanks to Ben Carman for the report!
Updates tailscale/corp#48187
Reported-by: Ben Carman
Change-Id: Ibf95e1ab9e4f0d7ef8866e8c26e62ed2a514455a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Nothing reads ipn.Notify.NetMap anymore. The previous commit removed
its runtime (non-initial) emission, and every first-party client is
also off the initial one: the Win32 and WinUI GUIs and the Apple
bridge subscribe with InitialStatus or InitialState plus peer deltas,
Android no longer uses it, and the remaining in-tree subscribers that set
NotifyInitialNetMap (sniproxy and the kube helpers) only did so to get
the initial Notify.SelfChange and discarded the netmap that tailscaled
built, encoded, and shipped for them.
Delete the Notify.NetMap field and the NotifyInitialNetMap bit. The
bit value stays reserved under the name ObsoleteNotifyInitialNetMap and
ValidateNotifyWatchOpt rejects subscriptions that set it, like the
NotifyRateLimit bit removed in the previous commit. NotifyNoNetMap
remains accepted as a no-op because shipping GUIs still set it.
The blessed way to seed a watcher's view is NotifyInitialStatus, but
it unconditionally built O(peers) status entries, which is exactly the
waste this series is deleting for watchers that only care about the
self node. Size the initial status to the subscription instead:
Status.Peer is only populated when the watcher also set
NotifyPeerChanges or NotifyPeerPatches, since only peer-delta
subscribers need a peer baseline to apply deltas to. That matches its
existing first-party users (containerboot and the WinUI GUI both pair
InitialStatus with peer bits).
Migrate sniproxy and the kube helpers to NotifyInitialStatus: they
seed from InitialStatus.Self and react to the (ungated) runtime
Notify.SelfChange messages after that, so their initial message now
carries one PeerStatus instead of a full netmap.
Also drop doc comment references to LocalClient.NetMap, a method that
does not exist; on-demand fetches go through other LocalAPI methods
such as LocalClient.Status.
Updates #12542
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I242992a744c0ffd0be6f27e8c735aa69d5b23b5e
Adds an opt-in, in-memory aggregator of recent connection-rejection
events (TSMP rejects received from peers, outbound TSMP rejects we emit
on ACL-blocked inbound flows, and pendopen timeouts) keyed by
(direction, proto, peer-address, reason). The aggregated data is exposed
over a new debug-rejects LocalAPI endpoint and a GET /debug/rejects c2n
endpoint, intended for future GUI/CLI consumption when diagnosing why a
connection failed.
Architecture:
- net/connreject holds the data types and a per-LocalBackend
Aggregator (LRU-bounded, default 256 entries on desktop / 32 on
mobile, per direction).
- feature/connreject is a self-registering ipnext.Extension that owns
one Aggregator per LocalBackend, installs note callbacks on the
tundev and engine, subscribes to OnSelfChange to flip the runtime
gate, and serves the LocalAPI/c2n endpoints.
- wgengine.Engine and *tstun.Wrapper each gain a SetConnRejectNote
setter; data-plane sites use a single atomic.Pointer load + nil
check, so the cost when no consumer is installed is one MOV.
Gating:
- Compile-time: ts_omit_connreject build tag (standard
feature/buildfeatures + condregister plumbing). Trims ~41 KB.
- Runtime: nodecap.ConnReject node attribute, off by default
at the control plane. May be removed once the feature is enabled
by default.
Updates CapabilityVersion to 146 (clients understand nodecap.ConnReject
and can serve GET /debug/rejects).
Adds Proto/Src/Dst accessors on flowtrack.Tuple (used by pendopen to
construct events without exposing the tuple's internals to the
aggregator).
Updates #1094
Updates #14802
Change-Id: I83e8f24a7e66fa2d158d128bd25fbe851134941b
Signed-off-by: James Tucker <james@tailscale.com>
Add a new modular dnsresolvecache feature that records every successful
DNS resolution from net/dnscache as a JSON file per hostname in
$statedir/dns-cache/, so a later boot with misconfigured DNS can still
find last-known-good IPs for critical hostnames like the control plane.
Files are rewritten only when their contents change, so a file's
modification time records when the answer last changed.
When regular DNS resolution fails, the disk cache is now consulted
before the DERP-based bootstrap DNS in net/dnsfallback. This is the
first step toward removing the DERP-based mechanism: new clientmetrics
(dnscache_disk_fallback_hit, dnscache_disk_fallback_miss,
dnscache_derp_fallback_ok, dnscache_derp_fallback_dial_ok) will tell us
when the DERP path no longer fires in the fleet and can be deleted.
The feature is linked into tailscaled by default (omittable with
ts_omit_dnsresolvecache) and is not included in tsnet.
Updates #21028
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I59228cbf68e3b48dfb1215cdd12bd8166ab14034
This commit bumps the wireguard-go dependency to incorporate changes to
the packet memory model and the tun.Device.Read and conn.ReceiveFunc I/O
interfaces. It updates their implementations accordingly.
These changes improve throughput in all measured benchmarks and reduce
peak RSS in six of eight cases. The two regressions will be addressed in
a follow-up commit that reduces peak RSS below the baseline measured at
1e69418. That work is kept separate to simplify review.
The following throughput and peak RSS benchmarks were performed with
iperf3 between two Intel i5-12400 nodes running Ubuntu 24.04 (Linux 6.8).
The UDP benchmarks did not use UDP GSO on the sender, so they were
roughly equivalent to single packet I/O through wireguard-go.
TCP/1 signifies one TCP stream; TCP/128 signifies 128 parallel TCP
streams.
Throughput (Mb/s)
Test 1e69418 After Change
TCP/1 10,371 11,354 +9.5%
TCP/128 7,886 8,404 +6.6%
UDP/1 2,111 2,853 +35.1%
UDP/128 1,747 2,235 +28.0%
Peak memory (VmHWM, kB)
Test Side 1e69418 After Change
TCP/1 TX 98,240 52,596 -46.5%
RX 287,748 73,384 -74.5%
TCP/128 TX 101,196 52,812 -47.8%
RX 290,420 63,620 -78.1%
UDP/1 TX 58,864 160,840 +173.2%
RX 137,516 49,900 -63.7%
UDP/128 TX 66,148 116,096 +75.5%
RX 154,384 56,556 -63.4%
Updates tailscale/corp#46716
Updates tailscale/corp#22467
Updates tailscale/corp#36989
Updates tailscale/corp#37878
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Replace the allowed-IP-only peer callback result with wgcfg.PeerConfig.
It carries allowed IPs and an optional pre-shared key through lazy peer
creation and active peer synchronization.
Update wireguard-go for the new peer PSK APIs.
Updates tailscale/tailcat#84
Change-Id: Iacd9d2c74b0b64d690f3cbdf93918686ac6076d7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously, the new disco keys entering the client via TSMP was routed
into controlClient to allow for deduplication and filtering of disco
keys and avoid control overwriting an active TSMP learned key with a
stale key.
A system supporting multiple disco keys was introduced to allow these
keys living side by side, along side a system for selecting an active
egress key with a bias towards keys learned via TSMP. On ingress any
known key is accepted.
This PR makes the switch to key routing, by sending new TSMP learned
disco keys directly into the userspace engine and in turn magicsock,
removing the need for a full layer of deduplication in the
controlClient.
Additionally, the system that previously fully reconfigured clients on
disco key updates coming from control is now using an optimistic
handshake througha newly introduced wireguard-go method,
ScheduleHandshakeOnUserSend implemented in:
https://github.com/tailscale/wireguard-go/pull/81
What this PR does not do is revert the mapSession back to being single
writer. Bringing the mapSession back to this state is desired, however
to ensure the plumbing is done right and easier to reason about, that
will be done in a separate PR.
Updates #20590
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Revision to earlier 49e148c4a3 to be robust in case somebody
unwisely edits global variable net/http.DefaultTransport.
Updates #21034
Change-Id: I0d4eb63d97c84641ffe45ac43fa4f3ccffc7446d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously Server.HTTPClient returned a client whose transport set
only DialContext, losing http.DefaultTransport's defaults such as
ForceAttemptHTTP2, MaxIdleConns, IdleConnTimeout, TLSHandshakeTimeout,
and ExpectContinueTimeout. Now it clones http.DefaultTransport and
overrides DialContext to dial over the tailnet, so it picks up those
settings and any future defaults.
Proxy is explicitly nil: an HTTP proxy from the environment would be
dialed through the tailnet, where it's unlikely to be reachable.
The new test compares the transport field by field against a clone of
http.DefaultTransport and fails on any unknown future field, forcing a
decision about how HTTPClient should handle it.
Updates tailscale/corp#47393 (as motivation)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I1e800982ee11d386699dd4f588c1fd2ce392f229
Promote the toolchain from Go 1.26.6 to Go 1.27.0, matching what
go.toolchain.next.rev has been testing. Besides the toolchain files
themselves (updated by pull-toolchain.sh), this bumps the go.mod go
directive, the Dockerfile golang base image, and the README, and
regenerates the depaware.txt files and the gzip assets in
tempfork/spf13/cobra and util/eventbus, whose bytes change with
Go 1.27's rewritten compress/flate.
Also bump golangci-lint to v2.13.1, the first release line built
with Go 1.27; the prebuilt v2.10.1 binary refuses to target a Go
version newer than the one it was built with.
Also bump golang.org/x/net to v0.58.0 (plus the sibling x/ module
upgrades it requires) to pick up upstream commit 8d10596d2624
(http2: avoid deadlocks in wrapped ClientConn state callback),
which we hit during Go 1.27 rc testing.
Also add docs/go-bump-checklist.md for next time.
Updates #20220
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: Ia3e4c9effafbc91227eed39efb52f1fba1b8d89c
Server.close() dereferenced s.sys.Bus unconditionally. s.sys is only
assigned partway through doInit, so it is still nil when Start fails
before that point, and Close then panics with a nil pointer dereference.
Close is reachable in that state: Start is idempotent via initOnce and
returns the stored initErr, so callers that `defer Close()` before
checking the error land in close() with s.sys == nil. Every other
resource released nearby (s.dialer, s.localAPIListener,
s.loopbackListener) is already nil-guarded; this line was the outlier.
This is reachable in practice from libtailscale/TailscaleKit, where a
failed tsnet start on darwin is followed by a close and surfaces as
EXC_BAD_ACCESS rather than the underlying start error.
Use GetOK instead of Get as well, so an unset Bus returns ok=false
rather than panicking via SubSystem.Get.
Adds TestCloseBeforeStart, which panics without this change.
Updates #20988
Signed-off-by: Prakash Rudraraju <1471544+prakashrj@users.noreply.github.com>
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
tsnet nodes have long been able to use an exit node by setting the
ExitNodeID pref through LocalClient, but that was neither documented
nor tested.
Add a package doc section (and regenerate the README) showing how to
select an exit node via EditPrefs, and add TestDialThroughExitNode
verifying that a Dial of a non-tailnet IP is routed over WireGuard to
the exit node rather than dialed from the host network.
Fixes#20986
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: Ia1715a628245c52163083803889fd1f475abfab7
Let clients pin favorite devices, exit nodes, and services so GUIs can
surface & change them. Pins are stored per login profile in the new
favorites feature module, keyed per category; devices and exit nodes by
StableNodeID, services by ServiceName.
The item types live in a leaf package feature/favorites/pintype,
keeping them out of the core ipn hierarchy. Each category has
its own type (pintype.Device, pintype.ExitNode, pintype.Service).
Exposed over LocalAPI at GET/POST /localapi/v0/pins, where POST replaces
only the categories named in the request so a client can update one
category without clobbering the others. Pins are local to the device and
are not synced across a user's devices.
updates tailscale/corp#44836
Signed-off-by: Will Hannah <willh@tailscale.com>
Co-authored-by: Will Hannah <wph@Wills-Virtual-Machine.local>
Static size checks (iossize) catch binary dirty-page growth but nothing
covered runtime heap cost, which is what actually consumes the iOS
Network Extension's 50 MiB jetsam budget. Bring up a tsnet backend
(with the full condregister feature set, matching shipping clients)
against an in-process testcontrol server and assert live post-GC heap
budgets for (a) backend startup with zero peers and (b) marginal cost
per netmap peer.
The startup test measures 1.3 MiB today and fails loudly on the
conn25 flow-table pre-allocation regression (17 MiB) that jetsam-killed
the iOS extension on large tailnets.
Budgets are deliberately generous (6-12x current measurements) to stay
flake-free while still catching the multi-MiB regressions that matter
for mobile.
A new debugknob enables us to constrain the GSO/GRO batch size to 1 for
these tests so as to avoid the memory allocation associated with those
buffers, which are a known issue with their own work stream.
Updates tailscale/corp#46408
Updates tailscale/corp#18514
Signed-off-by: James Tucker <james@tailscale.com>
sendTCP dials through tsdial.Dialer and so honors UseNetstackForIP, but
sendUDP opened a host-stack socket via packetListener and never consulted
the dialer. In userspace networking mode (tsnet, or tailscaled
--tun=userspace-networking) there is no tun device, so a split-DNS query
to a tailnet resolver blackholed for the full udpRaceTimeout before the
TCP fallback answered it.
Add dialUDP, which picks between the netstack dialer and the existing
packetListener the same way tsdial.Dialer.dialOneUser does, and adapt the
connected netstack conn to nettype.PacketConn. sendUDP is otherwise
unchanged, so txid checks, SERVFAIL/REFUSED handling, TC flagging and EDNS
clamping are identical on both paths.
Unskips the UDP subtest of TestForwarderNetstackUpstream, which now
answers in ~300µs rather than 2s, and adds unit tests for the dispatch and
for truncation over the netstack path. TestSplitDNSToTailnetResolverUDP
covers the whole path end to end over real gVisor: two tsnet nodes with no
tun, one resolving a split-DNS name whose upstream is the other.
Fixes#20314
Signed-off-by: Brendan Creane <bcreane@gmail.com>
Package tailcfg defines the types and constants used by the Tailscale
protocol, but since everything is all in one package, it’s difficult
to sift through the docs: https://pkg.go.dev/tailscale.com/tailcfg
We define and enumerate capabilities as string constants for
tailcfg.NodeCapability and tailcfg.PeerCapability. This PR extracts
them into their own packages:
- tailcfg.CapabilityFileSharing becomes nodecap.FileSharing
- tailcfg.NodeAttrOnlyTCP443 becomes nodecap.OnlyTCP443
- tailcfg.PeerCapabilityTaildrive becomes peercap.Taildrive
We originally intended for CapabilityFoo to grant an entitlement or
permission for Foo, and for NodeAttrBar to configure Bar in the
nodeAttrs section of the policy file. However, there was no technical
enforcement of this convention, so new capabilities have used the
NodeAttr prefix regardless of meaning. Therefore, this PR unifies
tailcfg.CapabilityFoo and tailcfg.NodeAttrBar into a single package as
nodecap.Foo and nodecap.Bar.
Ran `go fix -inline ./...` and committed the changes that replaced
uses of the tailcfg aliases with the authoritative ones.
Updates #20259
Change-Id: Ieb7e7e6c8247c39faf42fdf15c68cdc7c621c730
Signed-off-by: Simon Law <sfllaw@tailscale.com>
0eb38dc2e (#20561) made peer capability resolution return nothing for
peers with UnsignedPeerAPIOnly set, so that a possibly malicious
control server can't grant capabilities to peers outside the tailnet
lock authority. But Tailscale Funnel ingress nodes are unsigned by
design, and control intentionally grants them
PeerCapabilityIngress, which the peerapi /v0/ingress handler requires.
The result was that every Funnel connection was rejected with a 403
"denied; no ingress cap".
Instead of denying all capabilities to unsigned peers, allowlist
PeerCapabilityIngress specifically. It only permits ingress requests
over the PeerAPI, which unsigned peers can already reach, and the
node only serves them for targets explicitly configured for Funnel.
The tsnet TestFunnel didn't catch the regression because its fake
ingress peer was a normal signed peer. Teach testcontrol to mark a
node as UnsignedPeerAPIOnly (excluding such nodes from traffic-
permitting filter rules, as real control does, so clients don't
discard the packet filter) and make TestFunnel use it so the test
now exercises the same capability checks as production Funnel
traffic.
Updates tailscale/corp#46053
Updates #20739
Change-Id: I3f6b8e2a94d1c07b5a2e9d84f16c30aa79e5d21b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There are two places in the code where we need to compare the
latencies of a netcheck report. In both cases, the comparison wasn’t
well tested.
This PR extracts that logic into a Compare method of the new
RegionLatency type. This type wraps the map of latency measurements
keyed by region ID.
Updates #cleanup
Change-Id: I7f248988973007c2f452283c1b82f84b03068f77
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Add serviceclientprefs, an optional feature that stores and loads the
desktop clients' saved service launch preferences, one file per login
profile.
- Add GET|POST /localapi/v0/prefs/service-clients to load and save the
current profile's service client prefs.
- Add local client GetServiceClientPrefs and SetServiceClientPref that
call the new local api endpoint.
- Store the prefs with the ipn/store FileStore at
TailscaleVarRoot()/profile-data/<profileID>/service-client-prefs/<hex-encoded-key>,
so DeleteProfile cleans them up for free. Fall back to an in-memory
store when there's no var root.
- Register the feature and its local api route from build tagged files
so the whole thing drops out under ts_omit_serviceclientprefs.
- Add the serviceclient package holding Pref and Prefs (saved client,
username, database name, and last used time), so the local api client
and desktop apps can import the types without the feature machinery.
Change-Id: I340a99c1b332d181fb1556fbf3e8003bb3b95a08
Updates: https://github.com/tailscale/tailscale/issues/20429
Signed-off-by: Rollie Ma <rollie@tailscale.com>
The wireguard-go receive path could be in chanTUN.Write, selecting to
send on the Inbound channel, while test cleanup called chanTUN.Close,
which closed that same channel. The select on the closed channel in
Write did not synchronize with Close, so the race detector flagged
the send racing with the close. It could also have panicked with a
send on a closed channel.
Add a mutex serializing Write and Close. Write now checks for closed
under the lock before doing a non-blocking send, so Close can't close
Inbound mid-send.
Fixes#20541
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I8d8d10250cef0c1931753c78eebff6e8286f7201
Go 1.27 enables GOEXPERIMENT=jsonv2 by default: encoding/json is now
backed by the json/v2 machinery, and github.com/go-json-experiment/json
compiles as a thin alias of the standard library's encoding/json/v2.
Several tag options and behaviors we relied on did not make the cut for
the final Go 1.27 API, breaking tailscaled at runtime and four packages'
tests. This change adapts to the final API while keeping the wire format
byte-for-byte identical on all Go versions.
First, the `format` tag option was demoted to experimental. Its mere
presence in a struct tag now makes marshaling and unmarshaling fail at
runtime. tailcfg.SSHAction.SessionDuration had `format:nano` (added in
a2dc517d7 to pin the v1 representation), so on Go 1.27 any netmap
containing an SSH policy failed to decode, breaking every PollNetMap.
Remove the option here and in net/speedtest; time.Duration still
marshals as int64 nanoseconds under encoding/json on all Go versions
(Go 1.27's v1 mode sets FormatDurationAsNano by default), so old
clients and servers are unaffected. Add a regression test locking in
the exact wire format.
Consequently, invert the cmd/vet jsontags rule: it previously required
an explicit `format` tag on time.Duration fields, which is now exactly
wrong. It now rejects any `format` tag option, which would have caught
this bug in CI.
Second, the `inline` tag option was renamed to `embed`. The standard
library silently ignores `inline`, while the pinned go-json-experiment
module (used on Go 1.26) only knows `inline`. Specify both options in
types/prefs and logtail; each implementation ignores the option it does
not know, producing identical output. Drop `inline` once we require
Go 1.27.
Third, encoding/json (v1) now dispatches to MarshalJSONTo and
UnmarshalJSONFrom methods and its v1 options flow into nested
jsonv2.MarshalEncode calls. Types whose v1 methods deliberately
routed through jsonv2 for v2 semantics (types/opt.Value, the
types/prefs preference types) would silently change wire format
(e.g. nil slices becoming null). Pin jsonv2.DefaultOptionsV2 in
their jsonv2 methods so the representation is the same regardless
of the entry point.
Finally, json.Marshal costs one more allocation under Go 1.27,
tripping the types/logger.AsJSON alloc test. Switch its fmt.Formatter
to jsonv2.MarshalWrite with explicit v1 options, which writes directly
to the fmt.State: one allocation on both toolchains with unchanged
output. Depaware files pick up the go-json-experiment/json/v1 options
shim as a new dependency of types/logger.
With this change, go test ./... passes with both Go 1.26.5 and
go1.27rc2.
Updates #20220Fixes#20528Fixes#20254
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I694c7d57fd81e55a579c579e9be10032bca569d4
Processing a peer add/remove delta still materialized the full netmap
(an O(n) slicesx.MapValues plus sort over all peers, at 10k+
peers in a large tailnet) twice per delta: once in UpdateNetmapDelta
purely to hand the self node to Engine.SetSelfNode, and once in
authReconfigLocked.
Neither needs peers anymore. SetSelfNode gets the self node from the
existing nodeBackend.Self accessor. authReconfigLocked only reads
self-node fields (SelfNode, NodeKey, GetAddresses, HasCap) now that
WireGuard peers ride the incremental route manager and per-peer config
source, so it can use the peers-free NetMap accessor.
That also makes nmcfg.WGCfg vestigial: since wgcfg.Config lost its
Peers field, its peer walk existed only to emit the [v1] skip logs
(expired peers, unselected exit nodes, unaccepted subnet routes),
duplicating filtering the route manager already does. Delete the
package and construct the two-field wgcfg.Config inline. The skip
logs go away; if they're missed, the route manager can log them
incrementally at upsert time instead of rescanning every peer on
every reconfig.
With this, the runtime.DidRange analysis (see the ts_rangehook test)
shows a delta netmap update performing no O(n) range loops except
updateRouteManagerExtras, and the delta phase of that test drops from
1.09s to 0.14s for 400 deltas at n=10000 (from 4.79s at the
start of this effort, before the incremental route manager work).
Updates #12542
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: Ia0e03ef9db0c988790b2c29de1f0505305e93f58
Captive portal detection was half-migrated: it had a build tag and
buildfeatures constant, but its code still lived in build-tag-gated
files in ipn/ipnlocal and net/netcheck, with its per-backend state
(context, cancel func, signaling channel) as fields on LocalBackend.
Move it under feature/captiveportal. The health-driven detection loop
becomes an ipnext.Extension holding its own state: it starts and
stops the loop from the BackendStateChange hook and subscribes to
health.Change events on the eventbus itself, removing the captive
portal hooks and special cases from LocalBackend entirely. The DERP
map now comes from a new ipnext.NodeBackend.DERPMap method, and the
preferred DERP region from magicsock's last netcheck report (the
same underlying source as the previously used Hostinfo.NetInfo).
The netcheck probe hook is now exported with a signature free of
netcheck internals, and its implementation moves to the small
feature/captiveportal/netcheckhook package, which installs the hook
as an import side effect. That package stays free of tsd/wgengine
dependencies so the tailscale CLI can keep probing for captive
portals in "tailscale netcheck" without linking the daemon-side
extension. The net/captivedetection library itself is unchanged and
stays put; after this change it is only linked when something pulls
in netcheckhook or the feature extension.
tailscaled links the feature by default via condregister as before,
but tsnet no longer does (shrinking tsnet, k8s-operator, and tsidp);
tsnet users who want it can blank-import the feature package, and
tsnet's dep test now locks that in.
Updates #12614
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I3f1d09f9dc03e18f9a648ab5e42d16fa540b3fa9
The wireguard-go device now learns its peer set solely from the live
per-peer config source that LocalBackend installs with
Engine.SetPeerConfigFunc, backed by the route manager. Peers are
created lazily on first packet and converged per peer with
Engine.SyncDevicePeer, so the full-peer-list snapshot in wgcfg.Config
and the diff-and-reconfigure machinery around it (wgcfg.Peer,
ReconfigDevice, and the engine's full device sync in
maybeReconfigWireguardLocked) are dead weight: they duplicated state
that the route manager already owns and forced every netmap change to
rebuild and rehash the entire peer list.
Delete the Peers field and the Peer type from wgcfg, along with
ReconfigDevice and maybeReconfigWireguardLocked. Engine.Reconfig no
longer does any device peer work; it only manages the private key,
addresses, and the non-peer subsystems. Full-netmap application converges the device by
syncing exactly the peers whose routes the route manager reports as
changed or removed.
Updates #12542
Change-Id: Ic776e42cfaa5be6b9329b3d381d5cbde17d7078b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously tstun.Wrapper.SetWGConfig walked wgcfg.Config.Peers on every
netmap to rebuild its own IP-to-peer table for masquerade NAT rewrites
and jailed-peer classification. Now the tun layer instead consumes the
route manager's shared immutable outbound snapshot directly, via a new
Engine.SetPeerRoutes method: LocalBackend pushes the snapshot (plus this
node's native Tailscale addresses) after every route manager commit that
can change it, and per-packet lookups read the interned PeerRoute
attributes from that table.
When no current peer is jailed or masqueraded, LocalBackend installs a
nil table (gated on RouteManager.HasDataPlaneAttrs), preserving the
per-packet nil-check fast path. The exitNodeRequiresMasq machinery is
deleted: its purpose was populating the table with all peers so that
more-specific entries shadow an exit node's /0, and the always-full
route manager table gives that shadowing inherently.
This is the last step before removing the Peers field from wgcfg.Config.
Updates #12542
Change-Id: Ifce09ca929a3f2511303ca1d6efdd583739494ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The BIRD (BGP) integration previously lived half in cmd/tailscaled
(which created a chirp client via a build-tag-gated file on some
platforms) and half in wgengine (which carried the client in its
Config and toggled the "tailscale" protocol as the node gained or
lost primary subnet router duty).
Move it all to a new feature/bird package, installed on the engine
via the new wgengine.HookNewBird hook, like other feature/* packages.
wgengine.Config.BIRDClient (and the wgengine.BIRDClient interface)
are replaced by a BIRDSocket path from which the engine constructs
the feature's Bird handle at startup. The subnet router overlap
detection and protocol toggling move into feature/bird, preserving
the previous ordering: state is recomputed before Reconfig's
ErrNoChanges early return and applied after the router is configured.
tailscaled keeps BIRD support by default on the platforms that
previously had it (linux, darwin, freebsd, openbsd) via
feature/condregister.
Also, add an integration test, as this feature lacked much test
coverage previously.
Updates #12614
Change-Id: I7866a50779e454c87933b358735f7dcd9e2b126f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Engine.PeerForIP was pure delegation to the callback that LocalBackend
installs via SetPeerForIPFunc, so external callers going through the
engine were taking a pointless round trip: LocalBackend called
b.e.PeerForIP, which called right back into LocalBackend, and the
netstack UseNetstackForIP hooks in tsnet and tailscaled did the same
dance one layer removed.
Export LocalBackend.PeerForIP and make those callers use it directly.
The engine-internal cold paths (Ping, TSMP disco advertisements,
pendopen diagnostics) still need the lookup and have no netmap of
their own, so SetPeerForIPFunc stays on the interface, but the lookup
method itself is now unexported and gone from the Engine interface.
In tailscaled the UseNetstackForIP hook moves from netstack setup to
just after the LocalBackend is created, since the backend doesn't
exist yet when netstack is wired up.
Updates #12542
Change-Id: Ib1e1a4fa5c84ee0dcb9ce5d1910047f2bab9453c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Give nodeBackend a RouteManager and keep it in sync as routing
inputs change: full netmaps resync the whole peer set (removals plus
no-op-cheap upserts), incremental netmap deltas mirror their peer
upserts and removes into the same mutation batch, and
authReconfigLocked pushes the routing-relevant prefs (exit node,
subnet route acceptance, OneCGNAT) after resolving the exit node's
stable ID to its current numeric node ID.
A selected exit node that doesn't resolve to a current peer (a
nonexistent node, or MDM's "auto:any" placeholder awaiting
resolution) is not the same as no exit node: per the long-standing
ipn.Prefs.ExitNodeID contract, it blackholes internet traffic rather
than letting it escape to the local network. RouteManager's Prefs
gains an ExitNodeSelected bit so its OS route set keeps the default
routes in that case, with no outbound peer to carry them, matching
what routerConfigLocked does today, as pinned by TestRouterConfigExitNodeBlackhole in the previous commit.
All mutations happen with nodeBackend.mu held, satisfying the
RouteManager's serialized Begin/Commit contract.
Nothing consumes its snapshots yet; the wgengine data plane and OS
router wiring come next.
Updates #12542
Change-Id: I677b6b2c9efb8e41b3d27071bd9db73e01640d3b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Like the earlier RemoteConfig change, gate Hostinfo.AllowsUpdate on
feature.IsRegistered("clientupdate") in addition to the
buildfeatures.HasClientUpdate build-tag const. tsnet binaries don't
import feature/clientupdate even though ts_omit_clientupdate isn't
set, so they shouldn't tell control they can be remotely updated.
Add the previously missing feature.Register call to
feature/clientupdate, document the binary-support requirement on
tailcfg.Hostinfo.AllowsUpdate, and make tsnet's dep test verify it
doesn't depend on feature/clientupdate.
Updates #12614
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I526ef11f2a4141f5fce161b1f77263324014b5c4
wgcfg.Config.NetworkLogging carried the network flow logging identity
inside the WireGuard config, where it was unrelated to WireGuard; it
lived there mainly so that identity changes would defeat Reconfig's
ErrNoChanges check and reach the netlog startup/shutdown logic.
Remove the field and move the whole netlog lifecycle into a new
feature/netlog package, installed on the engine via the new
wgengine.HookNewNetLogger hook, like other feature/* packages. The
logging identity now comes from LocalBackend's current netmap via the
widened NetLogSource interface (replacing Engine.SetNetLogNodeSource),
so nmcfg no longer parses audit log IDs into the config. The engine
still calls the hook before its ErrNoChanges return and before
router.Set (to capture initial packets), and again after router.Set
(to capture final packets), preserving the previous ordering.
Core wgengine no longer imports wgengine/netlog, so minimal builds
drop it entirely. tailscaled keeps netlog via feature/condregister,
and tsnet imports feature/condregister/netlog explicitly to keep
netlog enabled by default in tsnet-based binaries (tsidp,
k8s-operator).
This is pulled out of a future change that removes wgcfg.Config.Peers,
to make that PR smaller.
Updates #12542
Updates #12614
Change-Id: I41ca7dfe43c51e977c41b5f8e934bd1f0e6e6e24
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
James Tucker