Like the earlier RemoteConfig change, gate Hostinfo.AllowsUpdate on
feature.IsRegistered("clientupdate") in addition to the
buildfeatures.HasClientUpdate build-tag const. tsnet binaries don't
import feature/clientupdate even though ts_omit_clientupdate isn't
set, so they shouldn't tell control they can be remotely updated.
Add the previously missing feature.Register call to
feature/clientupdate, document the binary-support requirement on
tailcfg.Hostinfo.AllowsUpdate, and make tsnet's dep test verify it
doesn't depend on feature/clientupdate.
Updates #12614
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I526ef11f2a4141f5fce161b1f77263324014b5c4
Add a new Prefs.RemoteConfig bool. When true, a c2n endpoint at
/remoteapi/localapi/* proxies into this node's LocalAPI at
/localapi/* with full read/write permission, giving the tailnet
admin the same API surface a local root/admin user has via the
tailscale CLI. All LocalAPI versions (v0, v1, ...) proxy through.
RemoteConfig is an alternative to Tailscale's default per-feature
double opt-in, in which both the tailnet admin and the local machine
owner must consent to each individual setting change. It is a single
client-side "I trust the tailnet admin" switch that, once on, hands
over full remote management of this node's settings and LocalAPI
without any further local prompt or confirmation.
This is only appropriate when the tailnet admin already owns the
machine (e.g. a corporate fleet device) or the local user has
explicitly delegated full control. It should never be enabled on a
personal/BYOD device with an untrusted tailnet admin. The trust
model is documented on the pref, on the hidden --remote-config CLI
flag, and on the feature/remoteconfig package.
The node advertises its RemoteConfig state to the control plane via
a new Hostinfo.RemoteConfig bool. This is only true when the feature
is both compiled in (buildfeatures.HasRemoteConfig) and its init
actually ran (feature.IsRegistered("remoteconfig")); tsnet builds
have the former but not the latter and correctly report false.
The handler lives in feature/remoteconfig and can be omitted with the
ts_omit_remoteconfig build tag. tsnet's TestDeps guards against
accidentally pulling it in.
Updates tailscale/corp#18043
Change-Id: I72ce10a90a0e4e738c72c940af3af64c986160b2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add consistent definitions and tests so that watchers of the IPN bus
can keep track of routers when listening for NotifyInitialStatus and
NotifyPeerChanges.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
This patch adds a new `client-side-reachability-routecheck` node
attribute to allow admins to selectively enable background routecheck
probing on trial nodes. The current implementation is still
experimental.
It adds the routecheck.IsEnabled helper to check for the new
`client-side-reachability-routecheck` node attribute alongside the
existing `client-side-reachability` node attribute in this node’s self
capabilities. This allows administrators to turn on and off this
feature by editing the policy file.
It adds the `TS_DEBUG_FORCE_CLIENT_SIDE_REACHABILITY_ROUTECHECK`
environment variable which can be set to override the policy file.
When set to `true`, it forcibly enables this feature. And when set to
`false`, it forcibly disables it.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Add a new tailcfg.NodeCapability (NodeAttrDisableCacheNetworkMaps) to allow the
policy document to override whether a node will receive the cache-network-maps
attribute by default. The client does not interpret this attribute directly, it
is used to influence decisions by the control plane.
As of 2026-06-01, cache-network-maps is only sent when explicitly requested by
the policy. In a future version, we will send it by default for clients with a
sufficient capability version (to be added in a future commit), except to
ephemeral nodes, unless the policy sets disable-cached-network-maps.
Updates #12639
Updates tailscale/projects#28
Change-Id: I6376376d7898f7da8db977e457dcd45df9deef41
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
This NodeCapability works around the UDP GSO bugs introduced by
torvalds/linux@b10b446 (v7.0-rc1). These bugs were later fixed by
torvalds/linux@78effd8 and torvalds/linux@5f17ae0 (v7.1-rc5). These
Linux kernel bugs cause mangled UDP headers and UDP checksums, resulting
in high levels of packet loss.
The aforementioned bugs have already made their way downstream into
various distros, e.g. Ubuntu 26.04 LTS. Impacted users are now dealing
with poor UDP performance in tailscaled, and in any other software that
makes use of UDP GSO.
Not all users of the affected kernels are impacted as the relevant
kernel code path sits between kernel and netdev driver, and behaviors
vary by driver/device capability.
We cannot detect impact at runtime, as this would require gathering all
netdevs, and performing loopback tests. This is invasive and in many
cases impossible.
So, we are left to choose between disabling UDP GSO for all users on
affected kernels, whether they experience real impact or not, or try
and work around the bugs. Disabling UDP GSO for a user that is not
impacted can cut max throughput in half, and consume more CPU cycles.
This commit attempts to workaround the bugs by avoiding UDP GSO when
batches are small, and injecting a 1-byte sentinel tail payload when
they are large. This tail payload is smaller than "GSO size", which
sidesteps the primary trigger of all fragments in a batch being
equal in length.
The end result is slightly increased payload and packet overhead, but
functional UDP GSO for all Linux 7.0-7.1.4 users, regardless of
netdev/driver.
Updates #19777
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Add four control-plane node attributes that let us disable UDP GSO/GRO
on the magicsock UDP socket and UDP/TCP GRO on the Tailscale TUN
device.
These complement the pre-existing TS_DEBUG_DISABLE_UDP_{GRO,GSO} and
TS_TUN_DISABLE_{UDP,TCP}_GRO envknobs. They exist so we can mitigate
upstream Linux kernel regressions on a deployed fleet without
requiring a client release, after two incidents (#13041, #19777) where
buggy kernel patches landed upstream and the fix took an excessively
long time to reach downstream distros.
Knob changes are reacted to in setNetworkMapInternal / SetNetworkMap via
a comparison against a cached "last applied" value and only an actual
transition triggers work: magicsock Rebind()+ReSTUN for UDP,
ApplyGROKnobs for TUN. The TUN side is gated by buildfeatures.HasGRO and
is one-way (wireguard-go GRO disablement is sticky); re-enabling
requires a client restart.
Updates #13041
Updates #19777
Change-Id: I802993070afa659cc06809bb0bfbb7f8a0cdb273
Signed-off-by: James Tucker <james@tailscale.com>
Emit runtime metrics as clientmetrics when the
NodeAttrEmitRuntimeMetrics NodeCapability is present.
We start small with just 2 metrics: heap bytes and total process memory.
Updates tailscale/corp#39434
Signed-off-by: Jordan Whited <jordan@tailscale.com>
The codegen path for map-of-slice-of-pointer fields, skipped
nil-valued entries. That dropped the key from the map.
This broke how dns.Config.Routes uses nil values sentinels.
Fixes#19730Fixes#19732Fixes#19746Fixes#19744
Change-Id: Ic6400227f4ab21b3ca0e8c0eeecf9b83d145a9ab
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
Seamless key renewal has been the default in all clients since 1.90.
We retained the ability to disable it from the control plane as a
precaution, but we haven't seen any issues that require us to disable it.
We're now removing all the code for non-seamless key renewal, because we
don't expect to turn it on again, and indeed it's been untested in the
field for three releases so might contain latent bugs!
Updates tailscale/corp#33042
Change-Id: I4b80bf07a3a50298d1c303743484169accc8844b
Signed-off-by: Alex Chan <alexc@tailscale.com>
The cloner's codegen for map[K][]*V fields was doing a shallow
append (copying pointer values) instead of cloning each element.
This meant that cloned structs aliased the original's pointed-to
values through the map's slice entries.
Mirror the existing standalone-slice logic that checks
ContainsPointers(sliceType.Elem()) and generates per-element
cloning for pointer, interface, and struct types.
Regenerate net/dns and tailcfg which both had affected
map[...][]*dnstype.Resolver fields.
Fixes#19284
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
If we get a 429 response during node registration, use the `Retry-After`
header for backoff instead of the regular exponential backoff.
The rate limiter error is propagated to the user, just like other
registration errors are, e.g.
```
$ tailscale up
backend error: node registration rate limited; will retry after 57s
exit status 1
```
Updates tailscale/corp#39533
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Clients with the newly added node attribute
`"disable-linux-cgnat-drop-rule"` will not automatically drop inbound
traffic on non-Tailscale network interfaces with the source IP in the
CGNAT IP range. This is an initial proof-of-concept for enabling
connectivity with off-Tailnet CGNAT endpoints.
Fixestailscale/corp#36270.
Signed-off-by: Naman Sood <mail@nsood.in>
Add a new vet analyzer that checks t.Run subtest names don't contain
characters requiring quoting when re-running via "go test -run". This
enforces the style guide rule: don't use spaces or punctuation in
subtest names.
The analyzer flags:
- Direct t.Run calls with string literal names containing spaces,
regex metacharacters, quotes, or other problematic characters
- Table-driven t.Run(tt.name, ...) calls where tt ranges over a
slice/map literal with bad name field values
Also fix all 978 existing violations across 81 test files, replacing
spaces with hyphens and shortening long sentence-like names to concise
hyphenated forms.
Updates #19242
Change-Id: Ib0ad96a111bd8e764582d1d4902fe2599454ab65
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add a new tailcfg.NodeCapability (NodeAttrCacheNetworkMaps) to control whether
a node with support for caching network maps will attempt to do so. Update the
capability version to reflect this change (mainly as a safety measure, as the
control plane does not currently need to know about it).
Use the presence (or absence) of the node attribute to decide whether to create
and update a netmap cache for each profile. If caching is disabled, discard the
cached data; this allows us to use the presence of a cached netmap as an
indicator it should be used (unless explicitly overridden). Add a test that
verifies the attribute is respected. Reverse the sense of the environment knob
to be true by default, with an override to disable caching at the client
regardless what the node attribute says.
Move the creation/update of the netmap cache (when enabled) until after
successfully applying the network map, to reduce the possibility that we will
cache (and thus reuse after a restart) a network map that fails to correctly
configure the client.
Updates #12639
Change-Id: I1df4dd791fdb485c6472a9f741037db6ed20c47e
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
After switching from cellular to wifi without ipv6, ForeachInterface still sees rmnet prefixes, so HaveV6 stays true, and magicsock keeps attempting ipv6 connections that either route through cellular or time out for users on wifi without ipv6
This:
-Adds SetAndroidBindToNetworkFunc, a callback to bind the socket to the selected Android Network object
Updates tailscale/tailscale#6152
Signed-off-by: kari-ts <kari@tailscale.com>
This change reintroduces UserProfile.Groups, a slice that contains
the ACL-defined and synced groups that a user is a member of.
The slice will only be non-nil for clients with the node attribute
see-groups, and will only contain groups that the client is allowed
to see as per the app payload of the see-groups node attribute.
For example:
```
"nodeAttrs": [
{
"target": ["tag:dev"],
"app": {
"tailscale.com/see-groups": [{"groups": ["group:dev"]}]
}
},
[...]
]
```
UserProfile.Groups will also be gated by a feature flag for the time
being.
Updates tailscale/corp#31529
Signed-off-by: Gesa Stupperich <gesa@tailscale.com>
I omitted a lot of the min/max modernizers because they didn't
result in more clear code.
Some of it's older "for x := range 123".
Also: errors.AsType, any, fmt.Appendf, etc.
Updates #18682
Change-Id: I83a451577f33877f962766a5b65ce86f7696471c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a new ControlKnob to make MagicDNS IPv6 registration
(telling systemd/etc) opt-out rather than opt-in.
Updates #15404
Change-Id: If008e1cb046b792c6aff7bb1d7c58638f7d650b1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In the absence of a better mechanism, writing unqualified hostnames to the hosts file may be required
for MagicDNS to work on some Windows environments, such as domain-joined machines. It can also
improve MagicDNS performance on non-domain joined devices when we are not the device's primary
DNS resolver.
At the same time, updating the hosts file can be slow and expensive, especially when it already contains
many entries, as was previously reported in #14327. It may also have negative side effects, such as interfering
with the system's DNS resolution policies.
Additionally, to fix#18712, we had to extend hosts file usage to domain-joined machines when we are not
the primary DNS resolver. For the reasons above, this change may introduce risk.
To allow customers to disable hosts file updates remotely without disabling MagicDNS entirely, whether on
domain-joined machines or not, this PR introduces the `disable-hosts-file-updates` node attribute.
Updates #18712
Updates #14327
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This commit adds a bool named PeerRelay to Hostinfo, to identify the host's status of acting as a peer relay.
Considering the RelayServerPort number can be 0, I just made this a bool in stead of a port number. If the port
info is needed in future this would also help indicating if the port was set to 0 (meaning any port in peer relay
context).
Updates tailscale/corp#35862
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
This adds a new node capability 'dns-subdomain-resolve' that signals
that all of hosts' subdomains should resolve to the same IP address.
It allows wildcard matching on any node marked with this capability.
This change also includes an util/dnsname utility function that lets
us access the parent of a full qualified domain name. MagicDNS takes
this function and recursively searchs for a matching real node name.
One important thing to observe is that, in this context, a subdomain
can have multiple sub labels. This means that for a given node named
machine, both my.machine and be.my.machine will be a positive match.
Updates #1196
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
And fix up the TestAutoUpdateDefaults integration tests as they
weren't testing reality: the DefaultAutoUpdate is supposed to only be
relevant on the first MapResponse in the stream, but the tests weren't
testing that. They were instead injecting a 2nd+ MapResponse.
This changes the test control server to add a hook to modify the first
map response, and then makes the test control when the node goes up
and down to make new map responses.
Also, the test now runs on macOS where the auto-update feature being
disabled would've previously t.Skipped the whole test.
Updates #11502
Change-Id: If2319bd1f71e108b57d79fe500b2acedbc76e1a6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
updates tailscale/corp#31571
It appears that on the latest macOS, iOS and tVOS versions, the work
that netns is doing to bind outgoing connections to the default interface (and all
of the trimmings and workarounds in netmon et al that make that work) are
not needed. The kernel is extension-aware and doing nothing, is the right
thing. This is, however, not the case for tailscaled (which is not a
special process).
To allow us to test this assertion (and where it might break things), we add a
new node cap that turns this behaviour off only for network-extension equipped clients,
making it possible to turn this off tailnet-wide, without breaking any tailscaled
macos nodes.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Check that the TPM we have opened is advertised as a 2.0 family device
before using it for state sealing / hardware attestation.
Updates #17622
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
Extend Persist with AttestationKey to record a hardware-backed
attestation key for the node's identity.
Add a flag to tailscaled to allow users to control the use of
hardware-backed keys to bind node identity to individual machines.
Updates tailscale/corp#31269
Change-Id: Idcf40d730a448d85f07f1bebf387f086d4c58be3
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
The default representation of time.Duration has different
JSON representation between v1 and v2.
Apply an explicit format flag that uses the v1 representation
so that this behavior does not change if serialized with v2.
Updates tailscale/corp#791
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This commit adds the subcommands `get-config` and `set-config` to Serve,
which can be used to read the current Tailscale Services configuration
in a standard syntax and provide a configuration to declaratively apply
with that same syntax.
Both commands must be provided with either `--service=svc:service` for
one service, or `--all` for all services. When writing a config,
`--set-config --all` will overwrite all existing Services configuration,
and `--set-config --service=svc:service` will overwrite all
configuration for that particular Service. Incremental changes are not
supported.
Fixestailscale/corp#30983.
cmd/tailscale/cli: hide serve "get-config"/"set-config" commands for now
tailscale/corp#33152 tracks unhiding them when docs exist.
Signed-off-by: Naman Sood <mail@nsood.in>
Saves 45 KB from the min build, no longer pulling in deephash or
util/hashx, both with unsafe code.
It can actually be more efficient to not use deephash, as you don't
have to walk all bytes of all fields recursively to answer that two
things are not equal. Instead, you can just return false at the first
difference you see. And then with views (as we use ~everywhere
nowadays), the cloning the old value isn't expensive, as it's just a
pointer under the hood.
Updates #12614
Change-Id: I7b08616b8a09b3ade454bb5e0ac5672086fe8aec
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The control plane will sometimes determine that a node is not online,
while the node is still able to connect to its peers. This patch
doesn’t solve this problem, but it does mitigate it.
This PR introduces the `client-side-reachability` node attribute that
switches the node to completely ignore the online signal from control.
In the future, the client itself should collect reachability data from
active Wireguard flows and Tailscale pings.
Updates #17366
Updates tailscale/corp#30379
Updates tailscale/corp#32686
Signed-off-by: Simon Law <sfllaw@tailscale.com>
A recent change (009d702adf) introduced a deadlock where the
/machine/update-health network request to report the client's health
status update to the control plane was moved to being synchronous
within the eventbus's pump machinery.
I started to instead make the health reporting be async, but then we
realized in the three years since we added that, it's barely been used
and doesn't pay for itself, for how many HTTP requests it makes.
Instead, delete it all and replace it with a c2n handler, which
provides much more helpful information.
Fixestailscale/corp#32952
Change-Id: I9e8a5458269ebfdda1c752d7bbb8af2780d71b04
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
