Commit Graph

  • 7fdcb70194 fix velleman entry in supported hardware table Matthew Wall 2013-08-06 12:18:29 +00:00
  • 154237538f update package changelogs for 2.4.0 release Matthew Wall 2013-08-04 06:03:11 +00:00
  • 973897aa0f Version 2.4.0 release v2.4.0 Tom Keffer 2013-08-03 22:15:00 +00:00
  • f441370bd6 Version 2.4.0 Tom Keffer 2013-08-03 22:14:03 +00:00
  • 2b66223240 Tidied up the VP driver. Version 2.4.0b1 Tom Keffer 2013-08-03 16:35:16 +00:00
  • bc30c7f357 Archive record packets with date and time equal to zero or 0xff now terminate dumps. Tom Keffer 2013-08-03 04:08:02 +00:00
  • b7e11d5a66 Refactored archive packet decoding routines, simplifying them. Tom Keffer 2013-08-03 03:43:28 +00:00
  • 9bd8ba3631 Refactored loop packet decoding routines, simplifying them a bit. Tom Keffer 2013-08-03 03:04:17 +00:00
  • c9404d174f Improved readability of the Vantage LOOP and archive record decoding. Vantage driver now detects 0x7fff as a null high radiation reading (instead of 0). Tom Keffer 2013-08-02 19:08:55 +00:00
  • 1eb6767c53 comment Chris Manton 2013-07-28 01:22:07 +00:00
  • e64ac413b1 added velleman ws3080 to list of fine offset compatibles Matthew Wall 2013-07-22 18:16:35 +00:00
  • 45e48d96d9 Fixed bug that prevented WMR100 UV indexes from being reported. Tom Keffer 2013-07-14 18:53:36 +00:00
  • 4ed217f0f4 V2.4.0a2 Tom Keffer 2013-07-11 13:44:31 +00:00
  • 0f00443deb The logic to calculate a file name for summaryBy reports has been factored out into a separate function getSummaryByFileName, allowing it to be replaced by subclassing. Tom Keffer 2013-07-11 13:05:42 +00:00
  • 910b6a80bc Fixed a bug that did not allow plots with aggregations less than 60 minutes across a DST boundary. Tom Keffer 2013-07-11 03:27:16 +00:00
  • aa1949b676 The configuration utility wee_config_vantage now lets you change the time zone code or the time zone offset. Tom Keffer 2013-07-10 18:14:27 +00:00
  • 44cae03157 Added the ability to set DST to 'auto', 'off', or 'on' on the Vantage console. Tom Keffer 2013-07-10 15:01:11 +00:00
  • b599fd6b8f Changed key for humidity from 'humidity' to 'outHumidity'. Tom Keffer 2013-07-10 04:31:58 +00:00
  • dee6353ff0 Changed formatting of the WU RapidFire URL slightly. Tom Keffer 2013-07-08 01:06:23 +00:00
  • 2cf0ef2c3d V2.4.0a1 A new event, END_ARCHIVE_PERIOD has been added, signaling the end of the archive period. Tom Keffer 2013-07-08 01:03:55 +00:00
  • 98596ee79e Added installation instructions. Now has its own format dictionary, instead of sharing one with the Ambient protocol. Tom Keffer 2013-07-07 15:46:12 +00:00
  • ab42762711 Service StdTimeSync now does a clock sync on startup. Modified service_list to put it at the front of the list of services to be run. Tom Keffer 2013-07-07 15:37:26 +00:00
  • 0683bbacee Added proper properties. Tom Keffer 2013-07-07 04:05:32 +00:00
  • 89a251a4fa Experimental RapidFire implementation. Works only for Davis Vantage instruments. Tom Keffer 2013-07-07 04:03:52 +00:00
  • 5b0b0d55cf Changed key from the unfortunately (and overloaded) name 'rain' to 'hourRain'. Tom Keffer 2013-07-07 04:03:24 +00:00
  • a9b050ecb5 fix initialization bug Matthew Wall 2013-06-30 09:40:29 +00:00
  • 724b3aa389 Fixed minor typo in docs about MySQL permissions. Tom Keffer 2013-06-29 16:25:04 +00:00
  • 0de1158e34 added current weather message, thanks to lucas Matthew Wall 2013-06-23 19:04:44 +00:00
  • b33de08eb7 make ws28xx logging work for python 2.5, 2.6, and 2.7 Matthew Wall 2013-06-23 18:38:05 +00:00
  • 05345a0450 apparently no need to enumerate user files separately for rpm package Matthew Wall 2013-06-22 12:35:35 +00:00
  • 1c3aaf28cf respect bin/user files on rpm installs. fix readme target in makefile. Matthew Wall 2013-06-22 12:29:51 +00:00
  • 6928dcfb65 update package changelogs for 2.3.3 release Matthew Wall 2013-06-22 12:12:34 +00:00
  • c8b98d9d22 respect files in bin/user for debian installs Matthew Wall 2013-06-22 11:59:34 +00:00
  • 34e8809266 V2.3.3 Tom Keffer 2013-06-21 15:59:37 +00:00
  • 4e641cfaba Version 2.3.3 release v2.3.3 Tom Keffer 2013-06-21 15:52:49 +00:00
  • 9b7aa745a8 V2.3.3 Tom Keffer 2013-06-21 15:51:31 +00:00
  • 59352b7ba1 MySQL driver now explicitly converts any SQL arguments to a tuple first. Fixes problem where arguments derive from tuple, but override the string conversion operator (as does TimeSpan). Tom Keffer 2013-06-21 15:36:48 +00:00
  • d26d5250f4 Updated driver from Chris Manton Tom Keffer 2013-06-20 14:48:18 +00:00
  • fab4c2a29f update changelog for deb package 2.3.2-1 Matthew Wall 2013-06-17 02:25:45 +00:00
  • 8fc07c25e2 update rpm changelog for 2.3.2-1 Matthew Wall 2013-06-17 02:25:04 +00:00
  • 3abd366512 Option week_start now works. Tom Keffer 2013-06-17 00:46:05 +00:00
  • 3398ce2bbf Version 2.3.2 release v2.3.2 Tom Keffer 2013-06-16 13:42:10 +00:00
  • 272f348d76 V2.3.2 Tom Keffer 2013-06-16 13:41:18 +00:00
  • 6dcce3b8e9 Corrected error in start of aggregation time. Tom Keffer 2013-06-16 13:35:27 +00:00
  • 8153cb15ed Fixed bug that causes the first day in the stats database not to be included in calculations of all-time stats. Tom Keffer 2013-06-15 02:00:11 +00:00
  • 80b1e39f6d Now returns None if a body is always up. Tom Keffer 2013-06-12 13:42:54 +00:00
  • bca95ba351 document rain bucket calibration. fix bug in pressure reading (thank you luc) Matthew Wall 2013-06-07 14:00:15 +00:00
  • 0a8a4b77b8 better logging when console sends message with unknown device id Matthew Wall 2013-06-05 15:39:37 +00:00
  • 3f7ed906d1 minor consolidation of if-else clauses Matthew Wall 2013-06-04 14:43:51 +00:00
  • e1510a81a7 fixed message descriptions from luc's usb sniffing Matthew Wall 2013-06-04 14:31:37 +00:00
  • 1f8f18eb4d track signal strength and battery status in LOOP data Matthew Wall 2013-06-04 14:16:06 +00:00
  • d81b1aacee isolate some debugging messages. improve info/debug log messages during initialization. Matthew Wall 2013-06-04 13:49:17 +00:00
  • 7ad50d30e6 added wee_config_ws28xx. added dev notes from luc about timing and message types. added debug output for all (?) station data. eliminated part of the Settings cache. refactored how pairing is detected and cached. set transceiver polling to 0.001 to ensure all messages are detected. partial refactoring of setup and rf threading. explicit debug logging of all writes to disk for stat cache. eliminated more dead code. Matthew Wall 2013-06-04 12:33:25 +00:00
  • ffe6b2b540 intervalgen now uses a better example. Tom Keffer 2013-05-23 00:06:24 +00:00
  • 1ea4c0b11b Class TimeSpan is now a specialized tuple and can be used interchangeably with tuples. Tom Keffer 2013-05-22 20:58:38 +00:00
  • 3210446b08 If one of the sections SummaryByMonth, SummaryByYear, or ToDate is missing, the report engine no longer crashes. Tom Keffer 2013-05-21 23:17:28 +00:00
  • e77e0ed4cd Added upgrade instructions for upgrading skin.conf Tom Keffer 2013-05-18 16:46:51 +00:00
  • dda8451f84 Shorter time increments now use one hour boundaries. Tom Keffer 2013-05-17 20:05:12 +00:00
  • 3ba15ea67a Plots shorter than 24 hours are now possible. Tom Keffer 2013-05-17 19:55:37 +00:00
  • f33f0ad1bb Plots that show exactly 24 hours are now possible. However, the skin configuration file still does 27 hours. Tom Keffer 2013-05-17 18:42:30 +00:00
  • 114d31d787 check for bad pressure values that could cause math exceptions Matthew Wall 2013-05-10 21:08:04 +00:00
  • 38ba3cc60a Fixed bug that prevented overriding the FTP directory in section [[FTP]] of the configuration file. Tom Keffer 2013-05-03 14:21:21 +00:00
  • 432373fd1a Hoisted statement creating cursor outside of try block. Tom Keffer 2013-04-17 00:50:52 +00:00
  • 444ddcdf8c include weewx.conf.dist in list of conf files Matthew Wall 2013-04-16 14:43:35 +00:00
  • 0d8e33c94e include weewx.conf.dist in list of conf files Matthew Wall 2013-04-16 14:35:55 +00:00
  • d838792c37 avoid hang in debian postinst Matthew Wall 2013-04-16 03:51:57 +00:00
  • 2bd5515fd6 Added support for the temperature-only sensor THWR800 in the WMR100 driver. Tom Keffer 2013-04-15 16:50:42 +00:00
  • fcc861641e Version 2.3.1 release v2.3.1 Tom Keffer 2013-04-15 16:21:30 +00:00
  • 4c8eaff46f V2.3.1 Tom Keffer 2013-04-15 16:16:36 +00:00
  • a2c37dba48 On startup, now logs version of Python Tom Keffer 2013-04-15 15:50:25 +00:00
  • 34dd39e66e rsync now works with Python 2.5 and 2.6 (not just 2.7) Tom Keffer 2013-04-13 14:44:23 +00:00
  • 0f9e075f34 Tom Keffer 2013-04-13 00:11:05 +00:00
  • 167a0f51cd Version 3 of Chris Manton's WMR200 driver, rec'd 9-Apr-2013. Tom Keffer 2013-04-11 17:01:31 +00:00
  • 263f5dac94 forgot to add fine offset catchup changes to changelog Matthew Wall 2013-04-11 15:43:50 +00:00
  • ff9d0f13e9 update package changelogs Matthew Wall 2013-04-10 02:08:21 +00:00
  • 13d1bf2dfb Version 2.3.0 release v2.3.0 Tom Keffer 2013-04-10 01:49:34 +00:00
  • 2f2be08a09 V2.3.0 Tom Keffer 2013-04-10 01:48:05 +00:00
  • 80dbb48d98 A few nips and tucks in the User's Manual. Tom Keffer 2013-04-07 16:27:19 +00:00
  • 11bb912cb8 V2.3.0b1 Tom Keffer 2013-04-05 17:02:00 +00:00
  • a0188c1b42 Added the ability dump a summary of the Vantage logger memory to a file. Tom Keffer 2013-04-05 16:54:38 +00:00
  • 9036beecb8 Update from Will Page, rec'd Sat, Mar 30, 2013 at 5:28 PM Tom Keffer 2013-04-04 15:31:07 +00:00
  • 5c8e83e79a keep each line at 78 characters or fewer for 80-column joy Matthew Wall 2013-04-02 19:18:08 +00:00
  • 60b8b4900c fixed merging of weewx.conf for rpm installs. Matthew Wall 2013-04-02 18:21:48 +00:00
  • 45ae7e9945 debconf must be initialized before everything else. added more feedback about station and driver during engine initialization. fix copyright notice. Matthew Wall 2013-04-02 16:16:53 +00:00
  • f6024a7bc5 added conf merging to rpm package. simplify version handling in merge_config.py and setup.py. Matthew Wall 2013-04-02 15:24:23 +00:00
  • 5414693d82 minor comments cleanup. format to 80 columns. Matthew Wall 2013-04-02 15:23:46 +00:00
  • b132764959 merging of weewx.conf works on debian upgrades, but not sure of setup.py and merge_config.py placement. Matthew Wall 2013-04-02 10:57:50 +00:00
  • 2777bf4330 clean out some cruft from rpm spec. use appropriate names for weewx merging. Matthew Wall 2013-04-01 22:54:00 +00:00
  • e30ed370bb fixed bug in wmr9x8 template. added ability to merge weewx.conf for debian installs. Matthew Wall 2013-04-01 21:57:11 +00:00
  • d18f17dfa3 added utility to merge configuration files Matthew Wall 2013-04-01 21:55:12 +00:00
  • fe4e23497f emit status changes to log to help diagnose fousb lockups. added latest live_data changes from jim easterbrook. Matthew Wall 2013-04-01 15:32:18 +00:00
  • 2f9393b5df V2.3.0a5 Tom Keffer 2013-04-01 14:42:02 +00:00
  • b800e6b4e5 From Chris Manton Bugfixes: Reduced logging spam to syslog Added singleton to handle watchdog thread for live data -Upon exception another driver is instantiated which caused thread leaks. Singleton re-uses thread when subsequent drivers are instantiated. Added poll_device thread to poll the device -The wxengine record phase may takes an indefinite time. During this time if the weather console is pumping data, the buffers overflow causing lost data. This thread ensures no data is lost from the weather console regardless how long the wxengine takes to process the generated packets. Added singleton for poll_device thread Some more cleanup and logging options. Tom Keffer 2013-04-01 14:32:24 +00:00
  • 70f0c35d91 use max_rain_rate instead of rain_max_sane so that single parameter can be used for different sampling periods and both archive/loop records. Matthew Wall 2013-03-31 21:20:39 +00:00
  • 54b89c09bb provide more log feedback when starting/stopping weewx Matthew Wall 2013-03-31 17:32:26 +00:00
  • 3e547bbaee clean up rain calculations and diagnostics Matthew Wall 2013-03-31 17:31:07 +00:00
  • a4778758df V2.3.0a4 Tom Keffer 2013-03-29 00:31:44 +00:00
  • 1322d10a40 Fixed bug that caused Corrections to be applied twice to records if software record generation was used. Tom Keffer 2013-03-28 23:42:41 +00:00
  • 68c94bca04 Now closes the archive database on shutdown. Tom Keffer 2013-03-28 23:40:05 +00:00
  • 7347288260 forgot to import colorsys for daynight gradients Matthew Wall 2013-03-28 00:38:51 +00:00