# WMR100 {id=wmr100_notes} The station emits partial packets, which may confuse some online services. ## Configuring with `weectl device` {id=wmr100_configuration} The WMR100 stations cannot be configured with the utility [`weectl device`](../utilities/weectl-device.md). ## Station data {id=wmr100_data} The following table shows which data are provided by the station hardware and which are calculated by WeeWX.
WMR100 station data
Database Field Observation Loop Archive
barometer S
pressure pressure H
altimeter S
inTemp temperature_0 H
outTemp temperature_1 H
inHumidity humidity_0 H
outHumidity humidity_1 H
windSpeed wind_speed H
windDir wind_dir H
windGust wind_gust H
rain rain D
rain_total H
rainRate rain_rate H
dewpoint S
windchill S
heatindex S
extraTemp1 temperature_2 H
extraTemp2 temperature_3 H
extraTemp3 temperature_4 H
extraTemp4 temperature_5 H
extraTemp5 temperature_6 H
extraTemp6 temperature_7 H
extraTemp7 temperature_8 H
extraHumid1 humidity_2 H
extraHumid2 humidity_3 H
extraHumid3 humidity_4 H
extraHumid4 humidity_5 H
extraHumid5 humidity_6 H
extraHumid6 humidity_7 H
extraHumid7 humidity_8 H
UV uv H
inTempBatteryStatus battery_status_0 H
outTempBatteryStatus battery_status_1 H
rainBatteryStatus rain_battery_status H
windBatteryStatus wind_battery_status H
uvBatteryStatus uv_battery_status H
extraBatteryStatus1 battery_status_2 H
extraBatteryStatus2 battery_status_3 H
extraBatteryStatus3 battery_status_4 H
extraBatteryStatus4 battery_status_5 H
extraBatteryStatus5 battery_status_6 H
extraBatteryStatus6 battery_status_7 H
extraBatteryStatus7 battery_status_8 H

Each packet contains a subset of all possible readings. For example, a temperature packet contains temperature_N and battery_status_N, a rain packet contains rain_total and rain_rate.

H indicates data provided by Hardware
D indicates data calculated by the Driver
S indicates data calculated by the StdWXCalculate Service