weewx/weewx.conf

# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2015 Tom Keffer <tkeffer@gmail.com>
# See the file LICENSE.txt for your rights.

##############################################################################

# This section is for general configuration information.

# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 0

# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /home/weewx

# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20

# Do not modify this. It is used when installing and updating weewx.
version = 3.7.0

##############################################################################

#   This section is for information about the station.

[Station]
    
    # Description of the station location
    location = Hood River, Oregon
    
    # Latitude and longitude in decimal degrees
    latitude = 45.686
    longitude = -121.566
    
    # Altitude of the station, with unit it is in. This is downloaded from
    # from the station if the hardware supports it.
    altitude = 700, foot    # Choose 'foot' or 'meter' for unit
    
    # Set to type of station hardware. There must be a corresponding stanza
    # in this file with a 'driver' parameter indicating the driver to be used.
    station_type = unspecified
    
    # If you have a website, you may specify an URL
    #station_url = http://www.example.com
    
    # The start of the rain year (1=January; 10=October, etc.). This is
    # downloaded from the station if the hardware supports it.
    rain_year_start = 1
    
    # Start of week (0=Monday, 6=Sunday)
    week_start = 6

##############################################################################

#   This section is for uploading data to Internet sites

[StdRESTful]
    
    [[StationRegistry]]
        # To register this weather station with weewx, set this to true
        register_this_station = false
    
    [[AWEKAS]]
        # This section is for configuring posts to AWEKAS.

        # If you wish to do this, set the option 'enable' to true,
        # and specify a username and password.  To guard against parsing
	# errors, put the password in quotes.
        enable = false
        username = replace_me
        password = "replace_me"

    [[CWOP]]
        # This section is for configuring posts to CWOP.

        # If you wish to do this, set the option 'enable' to true,
        # and specify the station ID (e.g., CW1234).
        enable = false
        station = replace_me
  
        # If this is an APRS (radio amateur) station, uncomment
        # the following and replace with a passcode (e.g., 12345).
        #passcode = replace_me (APRS stations only)

    [[PWSweather]]
        # This section is for configuring posts to PWSweather.com.

        # If you wish to do this, set the option 'enable' to true,
        # and specify a station and password.  To guard against parsing
	# errors, put the password in quotes.
        enable = false
        station  = replace_me
        password = "replace_me"

    [[WOW]]
        # This section is for configuring posts to WOW.

        # If you wish to do this, set the option 'enable' to true,
        # and specify a station and password.  To guard against parsing
	# errors, put the password in quotes.
        enable = false
        station  = replace_me
        password = "replace_me"

    [[Wunderground]]
        # This section is for configuring posts to the Weather Underground.
        
        # If you wish to do this, set the option 'enable' to true,
        # and specify a station (e.g., 'KORHOODR3') and password.
        # To guard against parsing errors, put your password in quotes:
        enable = false
        station  = replace_me
        password = "replace_me"
        
        # Set the following to True to have weewx use the WU "Rapidfire"
        # protocol. Not all hardware can support it. See the User's Guide.
        rapidfire = False

##############################################################################

#   This section specifies what reports, using which skins, to generate.

[StdReport]

    # Where the skins reside, relative to WEEWX_ROOT
    SKIN_ROOT = skins

    # Where the generated reports should go, relative to WEEWX_ROOT
    HTML_ROOT = public_html

    # The database binding indicates which data should be used in reports.
    data_binding = wx_binding

    # Options in the default_options section apply to every report.
    [[default_options]]
        [[[Units]]]
            [[[[Groups]]]]
                group_altitude = foot
                group_speed = mile_per_hour
                group_speed2 = mile_per_hour
                group_pressure = inHg
                group_rain = inch
                group_rainrate = inch_per_hour
                group_temperature = degree_F
                group_degree_day = degree_F_day

    # Each of the following subsections defines a report that will be run.
    # See the customizing guide to change the units, plot types and line
    # colors, modify the fonts, display additional sensor data, and other
    # customizations. Many of those changes can be made here by overriding
    # parameters, or by modifying templates within the skin itself.

    [[StandardReport]]
        # The StandardReport uses the 'Standard' skin, which contains the
        # images, templates and plots for the report.
        skin = Standard

    [[SmartphoneReport]]
        # The SmartphoneReport uses the 'Smartphone' skin, and the images and
        # files are placed in a dedicated subdirectory.
        enable = false
        HTML_ROOT = public_html/smartphone
        skin = Smartphone

    [[MobileReport]]
        # The MobileReport uses the 'Mobile' skin, and the images and files
        # are placed in a dedicated subdirectory.
        enable = false
        HTML_ROOT = public_html/mobile
        skin = Mobile

    [[FTP]]
        # FTP'ing the results to a webserver is treated as just another report,
        # albeit one with an unusual report generator!
        skin = Ftp

        # If you wish to use FTP, uncomment and fill out the next four lines.
        # Put the password in quotes to guard against parsing errors.
        #user = replace with the ftp username
        #password = replace with the ftp password
        #server = replace with the ftp server name, e.g, www.threefools.org
        #path = replace with the ftp destination directory, e.g., /weather

        # Set to True for an FTP over TLS (FTPS) connection. Not all servers
        # support this.
        secure_ftp = False

        # To upload files from something other than what HTML_ROOT is set
        # to above, specify a different HTML_ROOT here.
        #HTML_ROOT = public_html

        # Most FTP servers use port 21
        port = 21

        # Set to 1 to use passive mode, zero for active mode
        passive = 1

    [[RSYNC]]
        # rsync'ing to a webserver is treated as just another report
        skin = Rsync

        # If you wish to use rsync, you must configure passwordless ssh using
        # public/private key authentication from the user account that weewx
        # runs as to the user account on the remote machine where the files
        # will be copied.
        #
        # The following three lines determine where files will be sent.
        #server = replace with the rsync server name, e.g, www.threefools.org
        #path = replace with the rsync destination directory (e.g., /weather)
        #user = replace with the rsync username

        # Rsync can be configured to remove files from the remote server if
        # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
        # make a mistake in the remote path, you could could unintentionally
        # cause unrelated files to be deleted. Set to 1 to enable remote file
        # deletion, zero to allow files to accumulate remotely.
        delete = 0

##############################################################################

#   This service acts as a filter, converting the unit system coming from
#   the hardware to a unit system in the database.

[StdConvert]
    
    # The target_unit affects only the unit system in the database. Once
    # chosen it cannot be changed without converting the entire database.
    # Modification of target_unit after starting weewx will result in
    # corrupt data - the database will contain a mix of US and METRIC data.
    #
    # The value of target_unit does not affect the unit system for
    # reporting - reports can display US, Metric, or any combination of units.
    #
    # In most cases, target_unit should be left as the default: US
    #
    # In particular, those migrating from a standard wview installation
    # should use US since that is what the wview database contains.
    
    # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
    target_unit = US    # Options are 'US', 'METRICWX', or 'METRIC'

##############################################################################

#   This section can adjust data using calibration expressions.

[StdCalibrate]
    
    [[Corrections]]
        # For each type, an arbitrary calibration expression can be given. 
        # It should be in the units defined in the StdConvert section.
        # Example:
        foo = foo + 0.2

##############################################################################

#   This section is for quality control checks. If units are not specified,
#   values must be in the units defined in the StdConvert section.

[StdQC]
    
    [[MinMax]]
        barometer = 26, 32.5, inHg
        pressure = 24, 34.5, inHg
        outTemp = -40, 120, degree_F
        inTemp = 10, 120, degree_F
        outHumidity = 0, 100
        inHumidity = 0, 100
        windSpeed = 0, 120, mile_per_hour

##############################################################################

#   This section controls the origin of derived values.

[StdWXCalculate]

    [[Calculations]]
    # Derived quantities are calculated by this service. Possible values are:
    #  hardware        - use the value provided by hardware
    #  software        - use the value calculated by weewx
    #  prefer_hardware - use value provide by hardware if available,
    #                      otherwise use value calculated by weewx
    
        pressure = prefer_hardware
        barometer = prefer_hardware
        altimeter = prefer_hardware
        windchill = prefer_hardware
        heatindex = prefer_hardware
        dewpoint = prefer_hardware
        inDewpoint = prefer_hardware
        rainRate = prefer_hardware

##############################################################################

#   For hardware that supports it, this section controls how often the
#   onboard clock gets updated.

[StdTimeSynch]
    
    # How often to check the weather station clock for drift (in seconds)
    clock_check = 14400
    
    # How much it can drift before we will correct it (in seconds)
    max_drift = 5

##############################################################################

#   This section is for configuring the archive service.

[StdArchive]
    
    # If the station hardware supports data logging then the archive interval
    # will be downloaded from the station. Otherwise, specify it (in seconds).
    archive_interval = 300
    
    # If possible, new archive records are downloaded from the station
    # hardware. If the hardware does not support this, then new archive
    # records will be generated in software.
    # Set the following to "software" to force software record generation.
    record_generation = hardware
    
    # Whether to include LOOP data in hi/low statistics
    loop_hilo = True
    
    # The data binding used to save archive records
    data_binding = wx_binding

##############################################################################

#   This section binds a data store to a database.

[DataBindings]
    
    [[wx_binding]]
        # The database must match one of the sections in [Databases].
        # This is likely to be the only option you would want to change.
        database = archive_sqlite
        # The name of the table within the database
        table_name = archive
        # The manager handles aggregation of data for historical summaries
        manager = weewx.wxmanager.WXDaySummaryManager
        # The schema defines the structure of the database.
        # It is *only* used when the database is created.
        schema = schemas.wview.schema

##############################################################################

#   This section defines various databases.

[Databases]
    
    # A SQLite database is simply a single file
    [[archive_sqlite]]
        database_name = weewx.sdb
        database_type = SQLite
    
    # MySQL
    [[archive_mysql]]
        database_name = weewx
        database_type = MySQL

##############################################################################

#   This section defines defaults for the different types of databases.

[DatabaseTypes]

    # Defaults for SQLite databases
    [[SQLite]]
        driver = weedb.sqlite
        # Directory in which the database files are located
        SQLITE_ROOT = %(WEEWX_ROOT)s/archive
    
    # Defaults for MySQL databases
    [[MySQL]]
        driver = weedb.mysql
        # The host where the database is located
        host = localhost
        # The user name for logging in to the host
        user = weewx
        # Put the password in quotes to guard against parsing errors.
        password = "weewx"

##############################################################################

#   This section configures the internal weewx engine.

[Engine]
    
    [[Services]]
        # This section specifies the services that should be run. They are
        # grouped by type, and the order of services within each group
        # determines the order in which the services will be run.
        prep_services = weewx.engine.StdTimeSynch
        data_services = ,
        process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate
        archive_services = weewx.engine.StdArchive
        restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
        report_services = weewx.engine.StdPrint, weewx.engine.StdReport