Controls.Type looks like the monitor type a control applies to, and has
been kept in step with the Monitors enum since 1.27, but nothing has
ever read it. The control dropdown on the monitor page lists every row
by Name, no query filters on it, and no code compares it to the
monitor's own Type. It was a field the edit form asked for and the
control list displayed back.
The column appears to be MonitorPresets.Type copied by analogy, where
the idea is real: that one decides what a preset creates. That also
explains why every migration altering one altered the other.
Removes the column from the schema, adds the 1.39.39 migration, the edit form row
and its type list, the control list column, the defaults in Control.php
and Control.pm, and the value from all 53 shipped rows in controls.sql.
This supersedes the 1.39.38 retyping of three libvlc controls to Ffmpeg:
the column they were being retyped into is gone.
zmcamtool needs no change -- its import regex rewrites the Id and
captures the Name, so it is not positional past that, and its export is
a mysqldump that follows the live schema.
Dropping Type left the two shipped Pelco rows byte-identical to their
twins, which existed only as a Local and an Ffmpeg copy of the same
control, so the redundant copies are removed: 53 shipped rows become
51, with both Pelco-D and Pelco-P still present once.
Existing installs are deliberately left with their duplicates. The same
pair collapses there too, but deleting rows a monitor's ControlId may
point at, to tidy a repeated name in a dropdown, is not a trade a
migration should make silently.
Verified by loading the old and rewritten controls.sql into scratch
databases and diffing every remaining column across all 53 rows: no
value shifted, which is the failure mode when a positional INSERT loses
a field. The file mixes positional and explicit-column INSERTs, so both
forms were handled. Fresh-install and migrated Controls schemas compare
equal, the shipped data loads into both, and Monitors and MonitorPresets
keep their Type. Build clean, 147 test cases pass, php -l and perl -c
clean on the edited files.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015Y6FieTwEXuLhhR4e2yiax
An IP speaker is controllable but has none of the capabilities the Controls
table models: nothing moves, focuses or lights up. It plays a sound file it
already holds, selected by a numeric id, and carries an output volume.
Add CanAudioPlay, MinAudioFile, MaxAudioFile and CanAudioVolume to Controls,
with migration zm_update-1.39.21.sql. CanAudioPlay renders one button per
sound id plus a stop button; MinAudioFile/MaxAudioFile bound that range;
CanAudioVolume renders the volume pair. The sound id travels in the command
name (audioPlay12), the way presets already do, because a control button has
no way to attach a separate parameter.
Add ZoneMinder::Control::IPSpeaker driving the device's own HTTP interface,
and a Controls entry for it. Playback goes over the vendor interface rather
than ONVIF because the ONVIF audio output service on this firmware only
describes the output and offers no way to start a stored file.
Measured against a device reporting ONVIF Manufacturer "IPSpeaker" and
firmware CS20-V3.3.45N:
- File ids fall in two windows, 10-14 built-in and 20-30 operator uploads.
Anything else is refused with result -2, and an id in a window with no file
uploaded with result -3, so valid_fileid refuses only the former: an empty
slot is a legitimate id the operator may fill later.
- config=audio.set replaces the whole audio section, so a partial write
reverts the microphone, codec list and echo-cancellation settings. Every
volume change reads the section and echoes it back with the new level.
audio.get also returns outmute, which audio.set rejects, so it is excluded
from the field list.
- The volume reads back and round-trips, but the device's RTSP audio is a
pre-volume tap of the playback signal: it is unchanged with outvolume at 0,
so it cannot confirm the loudspeaker's acoustic output. CanAudioVolume is
set on the strength of the setting persisting, and both the POD and the
seed row say the acoustic effect is unconfirmed.
The seed row covers the built-in window only, because a fresh device has
nothing uploaded and the firmware refuses an empty slot.
Adding columns to Controls extends the 43 positional INSERTs in
db/controls.sql, which carry no column list and so must match the column
count exactly.
Tests: scripts/ZoneMinder/t/ip_speaker.t, 32 assertions covering file id
windows, volume clamping and stepping, request building and the whole-section
write. All pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UvTCzCbvGt8xKQRNCSA7o8
(cherry picked from commit d07e552a3c58373f7f0ccebf9aa28adb4d51baa3)
Add a CanIndicatorLight capability and status-aware Indicator toggle button. The indicator LED on the ASH21-B, ADC2W and ASH42-B is controlled via the LightGlobal config (configManager get/setConfig); add indicatorLightOn/Off/Status to Dahua_RPC and a model-specific 'Amcrest ASH42-B RPC' Controls row, with the capability also enabled on the ASH21-B/ADC2W/generic rows. Migration zm_update-1.39.13.sql adds the column.
Add Dahua_RPC keepAlive (global.keepAlive) wired into a 30s zmcontrol idle tick, plus session-expiry re-login retry in set_config and the status queries, so the long-running control daemon does not silently fail after the ~60s session timeout.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a CanLight control capability rendering a single status-aware Light toggle button. The ADC2W white light is driven via CoaxialControlIO.control (Type 1, numeric IO); the button queries live state and reflects it (amber when on).
To get device state to the browser, add an opt-in two-way response path to the control protocol: zmcontrol writes a JSON result back only when a request sets wants_response (fire-and-forget commands unchanged, SIGPIPE-safe); Monitor::sendControlCommandWithResponse and ajax/control.php return it.
Also adds get_config/set_config/probe to Dahua_RPC for characterising cameras, the CanLight column (migration zm_update-1.39.12.sql), edit-UI checkbox, and a config unit test.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
