mirror of
https://github.com/ZoneMinder/zoneminder.git
synced 2026-09-21 02:04:26 -04:00
Three values in the entry added a few commits ago were wrong, all for the same reason: I read them off http status codes, in the entry whose own comment says http status codes cannot be trusted here. Re-derived with amcrest_probe.pl, which decides every flag by comparing frames. CanMoveDiag was 1 because LeftUp returns 200. It shifts the picture by 1.8 against a 6.0 threshold, so nothing moves. Now 0. Pan and tilt speed were 1..8 from the Dahua documentation. Measured displacement is 31.5, 36.2, 41.4 for speeds 1, 2, 4 and then flat through 8, 16, 32 and 64, so the usable range is 1..4 even though the firmware accepts far higher. NumPresets was 255, the firmware ceiling. That is the wrong thing to measure: the classic skin draws one button per preset, and the camera refuses GotoPreset for any index not yet stored, so 255 gives a wall of buttons where all but the defined ones error. Now 25, matching the sibling Dahua/Amcrest RPC entries. CanMoveAbs stays 0 but for a better reason than before. PositionABS is accepted, reaches distinct positions and reproduces a revisited coordinate, so it passes the obvious tests. Its targets are 90 degrees apart though, and the median step shifts the view 16.4 where a single one second nudge shifts it 42.5 - the pan argument is being clamped to a fraction of what was asked, so a moveMap click would not land where it was aimed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LzHrvNtF13vyYBAJjktam6
109 lines
18 KiB
SQL
109 lines
18 KiB
SQL
--
|
|
-- Control protocol definitions shipped with ZoneMinder.
|
|
--
|
|
-- Pulled in by zm_create.sql with
|
|
-- source @PKGDATADIR@/db/controls.sql
|
|
-- the same way manufacturers.sql, models.sql and triggers.sql are. The
|
|
-- install(FILES ${dbfileslist}) glob in db/CMakeLists.txt puts it next to
|
|
-- zm_create.sql, which is where that path resolves to.
|
|
--
|
|
-- Adding an entry here only affects new installs. Existing databases are
|
|
-- upgraded by a db/zm_update-<version>.sql, which should use the
|
|
-- INSERT ... SELECT ... WHERE NOT EXISTS form so it can be re-run safely.
|
|
--
|
|
INSERT INTO `Controls` VALUES (NULL,'Pelco-D','Local','PelcoD',1,1,0,0,1,1,0,0,1,NULL,NULL,NULL,NULL,1,0,3,1,1,0,0,1,NULL,NULL,NULL,NULL,0,NULL,NULL,1,1,0,1,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,1,1,0,1,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,1,20,1,1,1,1,0,0,0,1,1,NULL,NULL,NULL,NULL,1,0,63,1,254,1,NULL,NULL,NULL,NULL,1,0,63,1,254,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Pelco-P','Local','PelcoP',1,1,0,0,1,1,0,0,1,NULL,NULL,NULL,NULL,1,0,3,1,1,0,0,1,NULL,NULL,NULL,NULL,0,NULL,NULL,1,1,0,1,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,1,1,0,1,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,1,20,1,1,1,1,0,0,0,1,1,NULL,NULL,NULL,NULL,1,0,63,1,254,1,NULL,NULL,NULL,NULL,1,0,63,1,254,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Sony VISCA','Local','Visca',1,1,0,0,1,0,0,0,1,0,16384,10,4000,1,1,6,1,1,1,0,1,0,1536,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,1,3,1,1,1,1,0,1,1,0,1,-15578,15578,100,10000,1,1,50,1,254,1,-7789,7789,100,5000,1,1,50,1,254,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Axis API v2','Remote','AxisV2',0,0,0,0,1,0,0,1,0,0,9999,10,2500,0,NULL,NULL,1,1,0,1,0,0,9999,10,2500,0,NULL,NULL,1,1,0,1,0,0,9999,10,2500,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,1,12,1,1,1,1,1,0,1,0,1,-360,360,1,90,0,NULL,NULL,0,NULL,1,-360,360,1,90,0,NULL,NULL,0,NULL,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Panasonic IP','Remote','PanasonicIP',0,0,0,0,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,1,8,1,1,1,0,1,0,0,1,1,NULL,NULL,NULL,NULL,0,NULL,NULL,0,NULL,1,NULL,NULL,NULL,NULL,0,NULL,NULL,0,NULL,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Neu-Fusion NCS370','Remote','Ncs370',0,0,0,0,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,1,24,1,0,1,1,0,0,0,1,1,NULL,NULL,NULL,NULL,0,NULL,NULL,0,NULL,1,NULL,NULL,NULL,NULL,0,NULL,NULL,0,NULL,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'AirLink SkyIPCam 7xx','Remote','SkyIPCam7xx',0,0,1,0,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,1,8,1,1,1,0,1,0,1,0,1,NULL,NULL,NULL,NULL,0,NULL,NULL,0,NULL,1,NULL,NULL,NULL,NULL,0,NULL,NULL,0,NULL,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Pelco-D','Ffmpeg','PelcoD',1,1,0,0,1,1,0,0,1,NULL,NULL,NULL,NULL,1,0,3,1,1,0,0,1,NULL,NULL,NULL,NULL,0,NULL,NULL,1,1,0,1,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,1,1,0,1,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,1,20,1,1,1,1,0,0,0,1,1,NULL,NULL,NULL,NULL,1,0,63,1,254,1,NULL,NULL,NULL,NULL,1,0,63,1,254,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Pelco-P','Ffmpeg','PelcoP',1,1,0,0,1,1,0,0,1,NULL,NULL,NULL,NULL,1,0,3,1,1,0,0,1,NULL,NULL,NULL,NULL,0,NULL,NULL,1,1,0,1,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,1,1,0,1,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,1,20,1,1,1,1,0,0,0,1,1,NULL,NULL,NULL,NULL,1,0,63,1,254,1,NULL,NULL,NULL,NULL,1,0,63,1,254,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Foscam FI8620','Ffmpeg','FI8620_Y2k',0,0,0,0,1,0,0,0,1,1,10,1,10,1,1,63,1,1,0,0,1,1,63,1,63,1,1,63,1,1,0,0,1,0,0,0,0,1,0,255,0,0,0,0,0,0,0,0,0,0,0,0,1,1,0,0,1,0,0,0,0,1,0,255,0,0,1,8,0,1,1,1,0,0,0,1,1,1,360,1,360,1,1,63,0,0,1,1,90,1,90,1,1,63,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Foscam FI8608W','Ffmpeg','FI8608W_Y2k',1,0,1,0,1,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,0,0,1,0,0,0,0,1,0,255,0,0,0,0,0,0,0,0,0,0,0,0,1,1,0,0,1,0,0,0,0,1,0,255,0,0,1,8,0,1,1,1,0,0,0,1,1,0,0,0,0,1,1,128,0,0,1,0,0,0,0,1,1,128,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Foscam FI8908W','Remote','FI8908W',0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,1,0,1,1,0,0,0,1,1,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Foscam FI9821W','Ffmpeg','FI9821W_Y2k',1,0,1,0,1,0,0,0,1,0,0,0,0,0,0,0,1,1,0,0,1,0,0,0,0,1,0,100,1,1,0,0,1,0,100,0,100,1,0,100,0,0,0,0,0,0,0,0,0,0,0,0,1,1,0,0,1,0,100,0,100,1,0,100,0,0,1,16,0,1,1,1,0,0,0,1,1,0,360,0,360,1,0,4,0,0,1,0,90,0,90,1,0,4,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Loftek Sentinel','Remote','LoftekSentinel',0,0,1,0,1,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,255,16,16,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,6,1,1,0,0,0,0,0,1,10,0,1,1,1,0,0,0,1,1,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Toshiba IK-WB11A','Remote','Toshiba_IK_WB11A',0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,10,0,1,1,0,1,0,1,0,1,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'WanscamPT','Remote','Wanscam',1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,16,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,16,0,0,0,0,0,0,0,1,16,1,1,1,1,0,0,0,1,1,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'3S Domo N5071', 'Remote', '3S', 0, 0, 1, 0,1, 0, 1, 1, 0, 0, 9999, 0, 9999, 0, 0, 0, 1, 1, 1, 1, 0, 0, 9999, 20, 9999, 0, 0, 0, 1, 1, 1, 1, 0, 0, 9999, 1, 9999, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,0,0, 1, 64, 1, 0, 1, 1, 0, 0, 0, 0, 1, -180, 180, 40, 100, 1, 40, 100, 0, 0, 1, -180, 180, 40, 100, 1, 40, 100, 0, 0, 0, 0);
|
|
INSERT INTO `Controls` VALUES (NULL,'ONVIF Camera','Ffmpeg','ONVIF',0,0,1,1,1,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,255,16,16,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,6,1,1,0,0,0,0,0,1,10,1,1,1,1,1,0,1,1,1,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Foscam 9831W','Ffmpeg','FI9831W',0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,16,1,1,1,1,0,0,0,1,1,0,360,0,360,1,0,4,0,0,1,0,90,0,90,0,0,0,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Foscam FI8918W','Ffmpeg','FI8918W',0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,8,0,1,1,1,0,0,0,1,1,0,360,0,360,1,0,4,0,0,1,0,90,0,90,1,0,4,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'SunEyes SP-P1802SWPTZ','Libvlc','SPP1802SWPTZ',0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,8,0,1,1,0,0,0,0,1,1,0,0,0,0,1,0,64,0,0,1,0,0,0,0,1,0,64,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Wanscam HW0025','Libvlc','WanscamHW0025', 1, 1, 1, 0,1, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,0,0, 1, 16, 1, 1, 1, 1, 0, 1, 1, 0, 1, 0, 350, 0, 0, 1, 0, 10, 0, 0, 1, 0, 0, 0, 0, 1, 0, 10, 0, 0, 0, 0);
|
|
INSERT INTO `Controls` VALUES (NULL,'IPCC 7210W','Remote','IPCC7210W', 1, 1, 1, 0,1, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,0,0, 1, 16, 1, 1, 1, 1, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Vivotek ePTZ','Remote','Vivotek_ePTZ',0,0,1,0,1,0,0,0,1,0,0,0,0,1,0,5,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,1,0,0,0,0,1,0,5,0,0,1,0,0,0,0,1,0,5,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Netcat ONVIF','Ffmpeg','ONVIF',0,0,1,0,1,0,0,0,1,0,0,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,100,5,5,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,0,0,0,100,5,5,0,0,0,0,0,1,255,1,1,1,1,0,0,0,1,1,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Keekoon','Remote','Keekoon', 0, 0, 0, 0,0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,0,0, 1, 6, 0, 1, 1, 1, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
|
|
INSERT INTO `Controls` VALUES (NULL,'HikVision','Local','HikVision',0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,20,1,1,1,1,0,0,0,1,1,0,0,0,0,1,1,100,0,0,1,0,0,0,0,1,1,100,1,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Maginon Supra IPC','cURL','MaginonIPC',0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,4,0,1,1,1,0,0,1,1,1,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Floureon 1080P','Ffmpeg','Floureon',0,0,0,0,1,0,0,0,1,1,18,1,1,0,0,0,1,1,0,0,1,0,0,0,0,0,0,0,1,1,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,20,0,1,1,1,0,0,0,1,1,0,0,0,0,1,1,8,0,0,1,0,0,0,0,1,1,8,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Reolink RLC-423','Ffmpeg','ONVIF',0,0,1,0,1,0,0,0,1,0,0,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,64,1,1,1,1,0,0,0,1,1,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Reolink RLC-411','Ffmpeg','ONVIF',0,0,1,0,1,0,0,0,1,0,0,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Reolink RLC-420','Ffmpeg','ONVIF',0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'D-LINK DCS-3415','Remote','DCS3415',0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'D-Link DCS-5020L','Remote','DCS5020L',1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,24,1,0,1,1,1,0,1,0,1,0,0,1,30,0,0,0,0,0,1,0,0,1,30,0,0,0,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'IOS Camera','Ffmpeg','IPCAMIOS',0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,0,0,0,0,0,0,0,0,1,0,1,0,1,0,0,0,0,1,1,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Dericam P2','Ffmpeg','DericamP2',0,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,10,0,1,1,1,0,0,0,1,1,0,0,0,0,1,1,45,0,0,1,0,0,0,0,1,1,45,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Trendnet','Remote','Trendnet',1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,0,1,0,1,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'PSIA','Remote','PSIA',0,0,0,0,1,0,0,1,0,0,0,0,0,0,0,100,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,20,0,1,1,1,0,0,1,0,1,0,0,0,0,1,-100,100,0,0,1,0,0,0,0,1,-100,100,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Dahua','Ffmpeg','Dahua',0,0,1,1,1,0,0,1,0,0,0,0,0,0,0,0,1,0,0,1,0,0,0,0,0,0,0,0,1,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,20,1,1,1,1,0,0,1,0,1,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'FOSCAMR2C','Libvlc','FOSCAMR2C',1,1,1,0,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,1,12,0,1,1,1,0,0,0,1,1,NULL,NULL,NULL,NULL,1,0,4,0,NULL,1,NULL,NULL,NULL,NULL,1,0,4,0,NULL,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'Amcrest HTTP API','Ffmpeg','Amcrest_HTTP',0,0,1,0,1,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,5,0,0,1,0,0,0,0,1,1,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,5);
|
|
INSERT INTO `Controls` (`Name`,`Type`,`Protocol`,`CanReset`,`CanReboot`,`CanZoom`,`CanZoomCon`,`HasPresets`,`NumPresets`,`HasHomePreset`,`CanSetPresets`,`CanMove`,`CanMoveDiag`,`CanMoveCon`,`CanPan`,`CanTilt`,`CanLight`,`CanIndicatorLight`) VALUES ('Dahua/Amcrest RPC','Ffmpeg','Dahua_RPC',1,1,1,1,1,25,1,1,1,1,1,1,1,1,1);
|
|
INSERT INTO `Controls` (`Name`,`Type`,`Protocol`,`CanReset`,`CanReboot`,`CanZoom`,`CanZoomCon`,`HasPresets`,`NumPresets`,`HasHomePreset`,`CanSetPresets`,`CanMove`,`CanMoveDiag`,`CanMoveCon`,`CanPan`,`CanTilt`,`CanIndicatorLight`) VALUES ('Amcrest ASH21-B RPC','Ffmpeg','Dahua_RPC',1,1,0,0,0,0,0,0,1,0,1,1,1,1);
|
|
INSERT INTO `Controls` (`Name`,`Type`,`Protocol`,`CanReset`,`CanReboot`,`CanZoom`,`CanZoomCon`,`HasPresets`,`NumPresets`,`HasHomePreset`,`CanSetPresets`,`CanMove`,`CanMoveDiag`,`CanMoveCon`,`CanPan`,`CanTilt`,`CanLight`,`CanIndicatorLight`) VALUES ('Amcrest ADC2W RPC','Ffmpeg','Dahua_RPC',1,1,0,0,0,0,0,0,0,0,0,0,0,1,1);
|
|
INSERT INTO `Controls` (`Name`,`Type`,`Protocol`,`CanReset`,`CanReboot`,`CanIndicatorLight`) VALUES ('Amcrest ASH42-B RPC','Ffmpeg','Dahua_RPC',1,1,1);
|
|
INSERT INTO `Controls` (`Name`,`Type`,`Protocol`,`CanReset`,`CanReboot`,`CanLight`) VALUES ('LTS CMIP1342WE-28MDA','Ffmpeg','HikVision',0,1,1);
|
|
INSERT INTO `Controls` (`Name`,`Type`,`Protocol`,`CanReset`,`CanReboot`,`CanLight`) VALUES ('LTS CMIP3CD42WI-28AISP','Ffmpeg','HikVision',0,1,1);
|
|
INSERT INTO `Controls` VALUES (NULL,'ONVIF','Ffmpeg','ONVIF',0,0,1,1,1,0,0,0,1,NULL,NULL,NULL,NULL,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,1,0,1,0,0,0,100,1,1,0,NULL,NULL,0,0,0,0,0,NULL,NULL,NULL,NULL,0,NULL,NULL,1,0,1,0,0,0,100,1,1,0,NULL,NULL,0,0,1,20,1,1,1,1,1,0,1,1,1,NULL,NULL,NULL,NULL,0,NULL,NULL,0,NULL,1,NULL,NULL,NULL,NULL,0,NULL,NULL,0,NULL,0,0);
|
|
INSERT INTO `Controls` VALUES (NULL,'HiSilicon Hi3510 CGI','Ffmpeg','HiSilicon_Hi3510_CGI',0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,10,0,1,1,1,0,0,0,1,1,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0);
|
|
|
|
--
|
|
-- Amcrest IP5M-1190EW, verified against firmware 2.810.00AC004.0.R.
|
|
--
|
|
-- Measured with amcrest_probe.pl, which decides every flag by comparing
|
|
-- frames before and after the command. That matters here: this firmware
|
|
-- answers OK to codes the hardware cannot perform, and its
|
|
-- ptz.cgi?action=getStatus reports a fixed Postion=0/16.65 MoveStatus=Idle
|
|
-- no matter what the camera is doing, so neither the status code nor the
|
|
-- reported position can be used to decide anything.
|
|
--
|
|
-- Pan, tilt and continuous move work. The diagonals do not: LeftUp is
|
|
-- accepted and shifts the picture by 1.8 against a 6.0 threshold, i.e. not
|
|
-- at all. Zoom, focus and iris do not work either - ZoomTele and
|
|
-- FocusNear are accepted and change nothing, while autoFocus,
|
|
-- getFocusStatus, IrisLarge and AutoPanOn are refused outright.
|
|
--
|
|
-- PositionABS is the subtle one. It is accepted, it reaches distinct
|
|
-- positions, and revisiting a coordinate reproduces the frame, so a naive
|
|
-- test calls it working. But its targets are 90 degrees apart and the
|
|
-- median step shifts the view by 16.4 where a single one second nudge
|
|
-- shifts it by 42.5, so the pan argument is being clamped to a fraction of
|
|
-- what was asked. A moveMap click would not land where it was aimed, so
|
|
-- CanMoveAbs and CanMoveMap are both 0.
|
|
--
|
|
-- Speed: the firmware accepts arg2 up to at least 64, but the measured
|
|
-- displacement stops increasing above 4 (31.5, 36.2, 41.4 for speeds 1, 2,
|
|
-- 4 and then flat), so the usable range is 1..4.
|
|
--
|
|
-- The white light exists in Lighting_V2 but coaxialControlIO is refused and
|
|
-- config writes to Lighting/Lighting_V2 are accepted and then silently
|
|
-- ignored, so CanLight stays 0.
|
|
--
|
|
-- Beware when checking any of this yourself: ptz.cgi?action=getStatus on
|
|
-- this firmware always reports Postion=0/16.65 MoveStatus=Idle no matter
|
|
-- what the camera is doing. Status cannot tell you whether a move worked;
|
|
-- compare snapshots instead.
|
|
--
|
|
-- NumPresets is 25 to match the sibling Dahua/Amcrest RPC entries. The
|
|
-- firmware itself stored a preset at every index tried up to 256, but this
|
|
-- column is not a hardware ceiling: the classic skin renders one button per
|
|
-- preset, and GotoPreset is refused for any index that has not been stored
|
|
-- yet, so a larger number just produces a wall of buttons that error until
|
|
-- each one is defined.
|
|
--
|
|
INSERT INTO `Controls` (`Name`,`Type`,`Protocol`,`CanReset`,`CanReboot`,`HasPresets`,`NumPresets`,`HasHomePreset`,`CanSetPresets`,`CanMove`,`CanMoveCon`,`CanPan`,`HasPanSpeed`,`MinPanSpeed`,`MaxPanSpeed`,`CanTilt`,`HasTiltSpeed`,`MinTiltSpeed`,`MaxTiltSpeed`) VALUES ('Amcrest IP5M-1190EW HTTP','Ffmpeg','Amcrest_HTTP',1,1,1,25,1,1,1,1,1,1,1,4,1,1,1,4);
|