zoneminder/distros/redhat/readme

What's New
==========

1. The Apache ScriptAlias has been changed from "/cgi-bin/zm/zms" to 
   "/cgi-bin-zm/zms". This has been to done to avoid this bug:
   https://bugzilla.redhat.com/show_bug.cgi?id=973067

   IMPORTANT: You must manually verify the value of PATH_ZMS under Options.
   Make sure it is set to "/cgi-bin-zm/nph-zms". Failure to do so will result
   in a broken system. You have been warned.

2. Due to the active state of the ZoneMinder project, we now recommend granting
   ALL permission to the ZoneMinder mysql account. This change must be done
   manually before ZoneMinder will run. See the installation steps below.

3. This package uses the HTTPS protocol by default to access the web portal.
   Requests using HTTP will auto-redirect to HTTPS. See README.https for
   more information.
   
4. This package ships with the new ZoneMinder API enabled.

New installs
============

1. Unless you are already using MariaDB server, you need to ensure that the
   server is configured to start during boot and properly secured by running:

	sudo dnf install mariadb-server
	sudo systemctl enable mariadb
	sudo systemctl start  mariadb.service
	mysql_secure_installation

2. Using the password for the root account set during the previous step, you
   will need to create the ZoneMinder database and configure a database
   account for ZoneMinder to use:

     mysql -uroot -p < /usr/share/zoneminder/db/zm_create.sql
     mysql -uroot -p -e "grant all on zm.* to \
                        'zmuser'@localhost identified by 'zmpass';"
     mysqladmin -uroot -p reload

   The database account credentials, zmuser/zmpass, are arbitrary. Set them to
   anything that suits your environment.

3. If you have chosen to change the zoneminder database account credentials to
   something other than zmuser/zmpass, you must now edit /etc/zm/zm.conf.
   Change ZM_DB_USER and ZM_DB_PASS to the values you created in the previous
   step.

   This version of zoneminder no longer requires you to make a similar change 
   to the credentials in /usr/share/zoneminder/www/api/app/Config/database.php 
   This now happens dynamically. Do *not* make any changes to this file.

4. Edit /etc/php.ini, uncomment the date.timezone line, and add your local
   timezone.  PHP will complain loudly if this is not set, or if it is set
   incorrectly, and these complaints will show up in the zoneminder logging
   system as errors.

   If you are not sure of the proper timezone specification to use, look at
   http://php.net/date.timezone

5. Disable SELinux 

   We currently do not have the resources to create and maintain an accurate
   SELinux policy for ZoneMinder on CentOS 7. We will gladly accept pull
   reqeusts from anyone who wishes to do the work. In the meantime, SELinux
   will need to be disabled or put into permissive mode.
   
   To immediately disbale SELinux for the current seesion, issue the following
   from the command line:

     sudo setenforce 0

   To permanently disable SELinux, edit /etc/selinux/config and change the
   SELINUX line from "enforcing" to "disabled". This change will take
   effect after a reboot.

6. Install mod_ssl or configure /etc/httpd/conf.d/zoneminder.conf to meet your
   needs. This package comes preconfigured for HTTPS using the default self
   signed certificate on your system. The recommended way to complete this step
   is to simply install mod_ssl:

	sudo yum install mod_ssl

   If this does not meet your needs, then read README.https to
   learn about alternatives. When in doubt, install mod_ssl.

7. Now start the web server:

	sudo systemctl enable httpd
	sudo systemctl start httpd

8. Now start zoneminder:

	sudo systemctl enable zoneminder
	sudo systemctl start zoneminder

Upgrades
========

1. Verify /etc/zm/zm.conf.

   If zm.conf was manually edited before running the upgrade, the installation
   may not overwrite it. In this case, it will create the file
   /etc/zm/zm.conf.rpmnew.

   For example, this will happen if you are using database account credentials
   other than zmuser/zmpass.

   Compare /etc/zm/zm.conf to /etc/zm/zm.conf.rpmnew. Verify that zm.conf
   contains any new config settings that may be in zm.conf.rpmnew.

   This version of zoneminder no longer requires you to make a similar change 
   to the credentials in /usr/share/zoneminder/www/api/app/Config/database.php 
   This now happens dynamically. Do *not* make any changes to this file.

2. Verify permissions of the zmuser account.

   Over time, the database account permissions required for normal operation
   have increased. Verify the zmuser database account has been granted all
   permission to the ZoneMinder database:

     mysql -uroot -p -e "show grants for zmuser@localhost;"

   See step 2 of the Installation section to add missing permissions.

3. Verify the ZoneMinder Apache configuration file in the folder 
   /etc/httpd/conf.d. You will have a file called "zoneminder.conf" and there
   may also be a file called "zoneminder.conf.rpmnew". If the rpmnew file
   exists, inspect it and merge anything new in that file with zoneminder.conf.
   Verify the SSL REquirements meet your needs. Read README.https if necessary.

4. Upgrade the database before starting ZoneMinder.

   Most upgrades can be performed by executing the following command:
   
     sudo zmupdate.pl

   Recent versions of ZoneMinder don't require any parameters added to the 
   zmupdate command. However, if ZoneMinder complains, you may need to call
   zmupdate in the following manner:

   sudo zmupdate.pl --user=root --pass=<mysql_root_pwd> --version=<from version>

5. Now restart the web server then start zoneminder:

        sudo systemctl restart httpd
	sudo systemctl start zoneminder