mirror of
https://github.com/mudler/LocalAI.git
synced 2026-10-28 09:08:54 -04:00
c6687ce67ceba5d5f72f70fe08094ea1ab4c773a
3
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 mudler-agentandEttore Di Giacinto
|
0a44303c21 |
fix(addons): one page title, one primary action and clearer empty states (#12850)
A visual pass over the add-on pages found the same few problems on several of them. Fix them with one rule per problem instead of page by page. Titles: every add-on page takes the host page-title size. Talk and Tables no longer shrink it, Studio draws one "Studio" title above its tabs (the card of a generator is a section), and Voice keeps one title on all its tabs. The Text to speech tab gets a styled form. The "not available" page shows the add-on name, not the lowercase id, and sits at the same inset as an add-on page. One primary action: the empty state of a list carries the add button, so the header button waits until there is something in the list (Voice library, enrolling a speaker or a person, Add rows). The Add-ons page shows one way into Browse. A table with no columns says so once. Tables: Share is hidden when there are no named accounts. The active table tab is highlighted and an empty tab list leaves no gap before "New table". Studio: the tab strip stays on one row at 1280 wide, /studio/3d opens the 3D tab, and an input chip has a divider between its label and its placeholder. Fine-tune and Quantize: the Experimental badge sits beside the lede, not inside the h1; an open step shows its number instead of an empty circle; the sticky action bar keeps a gap above it. The footer shows nothing for the empty version of a source build, and the Voice Text to speech tab says where to get a model when none is installed. Assisted-by: Claude:claude-sonnet-5-5 [Claude Code] Signed-off-by: Ettore Di Giacinto <mudler@localai.io> Co-authored-by: Ettore Di Giacinto <mudler@localai.io> |
||
|
mudler-agentandEttore Di Giacinto
|
60254e582d |
refactor(ui): remove the built-in copies of the add-on pages (#12852)
The Face recognition, Voice recognition, Voice library, Fine-tune and Quantize pages now live only in their add-ons. The router still kept a built-in copy of each one and showed it when the add-on was not installed, which meant two pages to maintain for the same job. Replace the MovedPage wrapper with a plain redirect. The old addresses (/app/face, /app/voice, /app/voice-library, /app/fine-tune and the rest) keep working and always open the add-on route. When the add-on is not installed or not ready, the add-on shell shows its "not available" page. The model of /app/face/:model and /app/voice/:model still travels as ?model=. Delete the six page files, the components, styles and helpers only they used, the biometrics translation namespace, and the end-to-end specs that tested the built-in copies. Drop the two add-on parity tests that compared the add-on page with the deleted core page. Server APIs and feature flags are unchanged. Assisted-by: Claude:claude-sonnet-5-5 [Claude Code] Signed-off-by: Ettore Di Giacinto <mudler@localai.io> Co-authored-by: Ettore Di Giacinto <mudler@localai.io> |
||
|
mudler-agentandEttore Di Giacinto
|
e45dc5e9f7 |
feat(addons): installable add-ons foundation and the Tables add-on (#12702)
* feat(addons): add the add-on runtime, navigation and first-party add-ons Add the add-on runtime to LocalAI: manifests, the host operation broker, admin gating by account role, the add-on UI bundle builder and the SDK for add-on pages. Move the navigation to Chat, Models, Add-ons and Settings, with pinned add-ons in the sidebar and an Add-ons drawer. Ship the first-party add-ons (voice, face, fine-tuning, quantization) as packages for linux/amd64, linux/arm64 and darwin/arm64. Intel macOS (darwin/amd64) is enabled in the platform files. Squashed from the review branch. The tree is unchanged; the pre-squash history is kept on a local backup branch. Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(gosec): tighten file modes and annotate false positives Write job state, configs and imported models with mode 0600, clean the paths that are read from disk, and mark the route tables, the header name and the retry jitter as reviewed false positives. Assisted-by: Claude Code:claude-sonnet-5-5 gosec Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(addons): keep API keys off recovery mutations and same-site cookies POST /api/addons/dispatch forwarded the recovery and update mutations to the owner for any administrator key, which skipped the browser-session rule of their own routes. Refuse those actions there. Also apply the same-origin rule to the legacy token cookie, not only the session cookie, because the global CSRF check lets same-site requests through. Do not fail the start of LocalAI when an add-on library cannot be refreshed; log it and keep the installed add-ons up. Assisted-by: Claude Code:claude-sonnet-5-5 go Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(addons): refuse a reinstall that would migrate retained data unbacked An upgrade takes a verified backup before the new package migrates the data. A reinstall over retained data has no running generation to stop, so the new package would migrate it without one. Refuse a reinstall whose data format differs from the retained one. Assisted-by: Claude Code:claude-sonnet-5-5 go Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(addons): release the manager lock while a release is fetched Submit held the state lock across the catalog lookup and the package download, so the apps list and status reads stalled for the whole install. Serialize Submit and Reconcile with their own lock and drop the state lock around the fetch only. Assisted-by: Claude Code:claude-sonnet-5-5 go Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(addons): kill an add-on only after three missed health probes One slow 100 ms probe killed a busy add-on and dropped the work it was serving. Require three misses in a row. Assisted-by: Claude Code:claude-sonnet-5-5 go Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(ui): move settings under the operate hub The Operate hub already has Settings as a tab, so the sidebar no longer shows a separate Settings entry. The /app/settings route stays, and the hub tab still reaches it. The navigation test now expects Chat, Models and Add-ons as the primary items. Assisted-by: Claude Code:claude-sonnet-5-5 node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(addons): accept same-host browser requests that carry no fetch metadata Browsers do not send Sec-Fetch-* headers over plain HTTP on an address that is not localhost, so every add-on request from a LAN address was refused as cross-site. Keep refusing a Sec-Fetch-Site value other than same-origin. When the header is absent, accept the request only if its Origin, or failing that its Referer, names the same host and port as the request. Assisted-by: Claude Code:claude-sonnet-5-5 go Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(ui): show the server's reason when an add-on request is refused A 403 or 400 answer showed a generic message and hid the reason in the response body, so a refusal by the browser guard could not be told from a missing permission. Show error.message from the body as the server sent it, and keep the generic text when the body has none. Assisted-by: Claude Code:claude-sonnet-5-5 node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(addons): run the add-on owner in the normal binary The owner was only enabled when an embedding host set the add-on config, so a normal run answered every add-on request as unavailable. Add --addons-enabled (default true) and --addons-ownership-mode (default named-user, or local-owner; anything else stops startup). The node is its own owner: state lives under the data path, and the carrier uses loopback keys made at each start and kept in memory. --addons-enabled=false turns the owner off completely. Named-user mode needs the account database. With authentication off the owner stays off and a warning says how to use local-owner. Assisted-by: Claude Code:claude-sonnet-5-5 go Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(addons): keep the loopback owner address stable across restarts The single-node loopback transport took a new ephemeral port at each start. The owner stores its address in its identity file and refuses to start when the address differs, so every start after the first failed with "invalid addon owner configuration". Choose the port once, keep it in the add-on state root (loopback-port, mode 0600) and reuse it. If the port is taken at a later start, stop with an error that names the port and --addons-enabled=false, because another port would break the identity check. The keys and certificate stay in memory. Assisted-by: Claude Code:claude-sonnet-5-5 go Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(addons): let add-on pages keep the host modules they were written against A page written for the web UI imports React, the router, i18next and a few shared components. The add-on builder refuses a bundle that holds a host file, so moving such a page into an add-on meant rewriting it. Add a compat mode to the shared builder. It answers those imports from a directory of stand-ins that read the SDK, bundles the dynamic import of the page code into the one output file, and collects the style sheets the page imports. A relative import that is not in the add-on's own source resolves to the file at the same path under the compat directory. Widen the SDK for these pages, without a version change: more host components (spinner, modal, lightbox, model picker) and hooks (models, resources, voice profiles, operations, MCP client), a style on icons, the icon names the pages draw, sdk.navigation.openApp to open a page of the app (only addresses under /app, and the way back as the only state) and sdk.portal. The shell passes the query string to the page. The stand-ins cover the router (the tab in the path, the model in the query), the translator over the host locale files, the core API calls through sdk.core.fetch, and byte copies of the pure helpers, with tests that keep the copies equal to the originals. Assisted-by: Claude Code:claude-sonnet-5-5 node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(addons): ship Studio and Talk as add-ons instead of built-in pages Studio and Talk were compiled into the web bundle and always listed in the Add-ons drawer. They are add-ons now, like Voice, Face, fine-tuning and quantization: a person installs and removes them, the drawer lists them only while they are installed, and they are packaged the same way. Move the pages, their components, hooks and helpers into addons/studio and addons/talk. Each has a manifest, a UI bundle, a release platform matrix and a catalog template, and is built by the compat mode of the shared builder. The core API stays where it is: the pages call it with the signed-in person's session. The history keeps its browser storage keys. The unit tests of the moved helpers move with them. In the core, drop the two pages, the Create group of the sidebar (Chat joins Home and Models in the old layout), the built-in catalog entries (the catalog is empty) and the talk locale namespace. The old addresses (/app/studio, /app/talk and the generator links) redirect to the add-on pages, with the model as ?model=. The Home /studio command is offered only while the Studio add-on is installed and opens it. The release workflow and its tests now list seven add-ons. Assisted-by: Claude Code:claude-sonnet-5-5 go node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(ui): run the Studio and Talk specs against the add-on bundles The pages are add-ons now, so a spec that draws one installs the real built bundle first: the apps list names it and its module and style sheet are served from the build output, the way the add-on owner serves them. studio-addon.js holds that helper, and the Studio and Talk fixtures call it. Update the specs for the new addresses (/app/addons/studio/studio, the model as ?model=), the session permission the add-on route needs, the legacy redirects, the Home /studio command that appears only while the add-on is installed, and the sidebar without a Create group. Add specs for the add-ons themselves: every tab draws with no script error, the shell titles the page once, the old addresses say so when the add-on is not installed, a button of the page reaches a core page with the way back, and the drawer lists both only after they are installed. Assisted-by: Claude Code:claude-sonnet-5-5 node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(ui): centre the icon of a built-in tile in its icon box The drawer drew the icon of a built-in tile (Studio's palette was one) in a bare 40px box. Only the placeholder box was laid out as a centred grid with the 20px size, so the real icon sat in the top-left corner at the size of the page text. Give the built-in tile the same classes as the placeholder box, and check in a browser that the icon is centred. Assisted-by: Claude Code:claude-sonnet-5-5 node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * docs(addons): describe Studio and Talk as add-ons Replace the built-in list (now empty) with the Studio and Talk add-on sections, the new targets of the old links, the Home command, and the seven packaged add-ons. Describe the SDK additions the pages use: components, hooks, icons, openApp and portal. Say on the Studio page that it is installed from the drawer. Assisted-by: Claude Code:claude-sonnet-5-5 Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(ui): click the shell title in the Studio slash-key spec The add-on shell titles the page, and the Studio overview no longer draws a second title, but the generator tabs keep theirs, so a bare h1 locator matched two elements. Click the first, which is the shell's. Assisted-by: Claude Code:claude-sonnet-5-5 node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(addons): read the loopback port file through os.Root The persisted port file was read with a path built from the add-on root, which gosec reports as a file inclusion through a variable. Open it through os.Root so the name cannot leave the root, even by a symbolic link, and require a regular file with no group or other access. A looser file now fails closed instead of being trusted. Assisted-by: Claude Code:claude-sonnet-5-5 Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(ui): expect Settings under the Operate hub, not the sidebar Settings moved out of the sidebar into the Operate hub. The navigation spec still expected a sidebar link. Assert that the sidebar has no Settings entry, and that the Operate hub opens Settings as a tab. Assisted-by: Claude Code:claude-sonnet-5-5 playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(ui): drop Settings from the 404 places Settings is a tab of the Operate hub and not a destination of its own, so the 404 page does not list it. Assert that it is absent. Assisted-by: Claude Code:claude-sonnet-5-5 playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(ui): drive the media history and TTS specs through the Studio add-on The image, video, sound and speech generators are pages of the Studio add-on now, and the old addresses redirect to it. Install the add-on with the Studio fixtures, open its pages and use its compose card, so the specs run against the page that exists. Assisted-by: Claude Code:claude-sonnet-5-5 playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(ui): count the first-run steps, not every list item The recommended models are a list inside the second step, so counting all list items read 3 only while the models were still loading. Count the step elements, which does not depend on the load order. Assisted-by: Claude Code:claude-sonnet-5-5 playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(ui): fail the node refresh by state, not by call count The spec served the list to the first request and failed the rest. The first request is not always the one from the page, so the page could get the failure first and show no list. Serve the list until the page shows it, then fail the refreshes. Assisted-by: Claude Code:claude-sonnet-5-5 playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(addons): default to local-owner when auth is off A server without authentication has no accounts, so named-user left the add-on owner off. Resolve the unset mode in one place: local-owner when authentication is off, named-user when it is on. A flag or environment value still wins, and an unknown value is still refused. Assisted-by: Claude Code:claude-sonnet-5-5 go Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(addons): register an official add-on library by default Add gallery/addons/index.yaml, a YAML index of the four first-party add-ons (fine-tuning, quantization, voice, face) in the library format. The entries come from addonpkg catalog over locally built linux/amd64 packages, so the digests pin those images. On the first start, when the owner has no sources.json, register the raw GitHub URL of that index on master as the "official" library and write the file. The file is then the record: a library the admin removes stays removed, and an existing file is never changed. --addons-official-library=false skips the default. Assisted-by: Claude Code:claude-sonnet-5-5 go node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * docs(addons): document the ownership default and the official library Assisted-by: Claude Code:claude-sonnet-5-5 Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(addons): list Studio and Talk in the first-party index Add the Studio and Talk entries to gallery/addons/index.yaml next to the four existing ones. They come from addonpkg catalog over locally built linux/amd64 packages, so the digests pin those images. Assisted-by: Claude Code:claude-sonnet-5-5 go node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(addons): expect Studio and Talk in the official index The official index now lists six add-ons. Update the test that decodes it so it accepts Studio and Talk. Assisted-by: Claude Code:claude-sonnet-5-5 go Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(addons): add a real icon to each first-party add-on Each icon is a 256 by 256 PNG: a rounded square in one colour of the UI kit palette with a white outline glyph from the kit sprite. Fine-tuning uses sliders, quantization layers, voice waveform, face user, studio palette, talk phone and tables database. They were rendered with headless Chrome from the sprite paths. Assisted-by: Claude Code:claude-sonnet-5-5 chrome Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(addons): ship a committed icon.png instead of the generated square The shared UI builder and the Tables builder copy ui/icon.png from the add-on source tree to the package unchanged when the file exists. They write the generated placeholder only when it does not. Add a fixture with an icon and a test for both cases. Assisted-by: Claude Code:claude-sonnet-5-5 node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(addons): list the tables add-on in the first-party index Add the Tables entry to gallery/addons/index.yaml next to the six existing ones. It comes from addonpkg catalog over a locally built linux/amd64 package, so the digest pins that image. The official index test now expects seven add-ons. Assisted-by: Claude Code:claude-sonnet-5-5 go node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(addons): make the Voice add-on one page with tabs The Voice add-on had four pages: recognition, library, create and speech, and the drawer listed two of them. It now has one page, "voice", and one drawer entry. Recognition, Library, Text to speech and From a recording are tabs of that page, drawn with the same tab strip the recognition page already used. The tab is the first path segment (voice/library), as in the Studio add-on, and the form that adds a voice is a view of the Library tab (voice/library/new). The old page names stay declared in the manifest. Each one redirects to its tab and keeps the query string, so saved links still open. Assisted-by: Claude Code:claude-sonnet-5-5 node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(ui): send the old voice routes to the Voice tabs /app/voice, /app/voice-library and /app/voice-library/new now open the matching tab of the Voice add-on page while the add-on is installed and running, and the core pages otherwise. The moved-page helper compares the first segment of the target with the declared pages, so a target can name a tab. The docs and the navigation spec list the new addresses. Assisted-by: Claude Code:claude-sonnet-5-5 node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(addons): cover the Voice tabs and the old page redirects The add-on unit tests render the tabs instead of the four pages. The Playwright spec checks the tab strip, the address of each tab, the missing Library tab for a member, and that the old page addresses of the add-on redirect to their tab with the query string kept. The migration table test follows the new targets. Assisted-by: Claude Code:claude-sonnet-5-5 node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(studio): keep the model menu inside a narrow screen The Home model picker sizes its menu from the viewport, and assumes the picker sits at the page gutter. In the Studio composer card the field is further in, so on a 390px screen the menu of the Sound expansion picker ended 7px past the right edge. Size the menu from the field it opens under instead. Assisted-by: Claude Code:claude-sonnet-5-5 node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(ui): build the add-on bundles once for the whole run Each worker built the Studio and Talk bundles into the same dist directory, and the build empties that directory first. A worker that started, or restarted after a failure, removed the files another worker was serving, so a Studio spec saw "the style sheet of the add-on could not be loaded". Build once in a global setup before the workers start. A run without the setup still builds per worker. Assisted-by: Claude Code:claude-sonnet-5-5 node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(ui): register the worker when the add-node spec says so The mocked roster added the worker on the third read of /api/nodes. The shell and the page both read it, and which one asks first depends on load, so the page could take the new worker as part of the roster it opened with and never show it as found. The worker now joins after the page shows it is listening. Assisted-by: Claude Code:claude-sonnet-5-5 node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(ui): hold the gallery answer until the skeleton is seen The spec delayed the answer by a fixed 800 ms and then looked for the skeleton. The assertion polls at growing intervals, so on a slow machine it could step over that window. The answer now waits until the skeleton has been seen, and the spec then checks that the skeleton goes away. Assisted-by: Claude Code:claude-sonnet-5-5 node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(ui): give the PDF tag the time the other PDF specs have pdf.js and its worker load on first use. The other specs in this file wait up to ten seconds for the result of that load. The first one waited five, and missed the tag on a busy machine. Assisted-by: Claude Code:claude-sonnet-5-5 node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(ui): build the Face and Fine-tuning bundles in the global setup The navigation spec serves the built Fine-tuning bundle, but nothing built it, so two specs failed on a fresh checkout when the dist folder was missing. The spec also built the Face bundle in a hook that every worker runs, and a build rewrites the folder the other workers serve. The global setup now builds Studio, Talk, Face and Fine-tuning once, before the workers start. The spec builds the two bundles itself only when it runs without the global setup. Assisted-by: Claude Code:claude-sonnet-5-5 node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(ui): fix the Home answers in the stale pin spec The spec asserts that the page shows no alert. The Home page raises its own alert when the model list fails or a staging operation has failed, and both answers come from the shared test server. A slow reply or a failed install left there counted as an alert about the pin. The spec now fixes both answers, so the alert count tells only about the pin. The assertions are unchanged. Assisted-by: Claude Code:claude-sonnet-5-5 node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(ui): read the server address in the add-node spec from the page The spec expected the register address to carry port 8089, so it failed on any other port. It now expects the origin the page was opened from. Assisted-by: Claude Code:claude-sonnet-5-5 node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(addons): give the navigation routes spec its own catalog No page is built in today, so the catalog is empty and the three specs that expect the studio and talk entries failed on the list and on the pin seed. They passed only while Studio and Talk were built in. The spec now sets a catalog of two ungated entries for each example and restores the old one afterwards. The assertions are unchanged. Assisted-by: Claude Code:claude-sonnet-5-5 go Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(cli): report a failed write of the MLX hostfile The tunnel callback ignored the error of os.WriteFile and set the hostfile variable even when the file was not written. It now logs the error and leaves the variable alone. Assisted-by: Claude Code:claude-sonnet-5-5 go Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(addons): discard the close error of the held listener errcheck flags the deferred Close of the listener that keeps the port busy. The test has no use for that error, so the defer drops it explicitly. Assisted-by: Claude Code:claude-sonnet-5-5 go Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(addons): move the add-on tool tests to Ginkgo The fine-tuning, quantization and add-on host library tests used t.Errorf, t.Fatal and t.Run, which the forbidigo rule rejects. They now use Describe, It and Gomega, with a suite bootstrap in each package. The cases and the assertions are the same. The tables in the host client and the tool schema tests keep one entry per case. Assisted-by: Claude Code:claude-sonnet-5-5 go Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(addons): move the host operation tests to Ginkgo The hostops tests used the testing package calls that forbidigo rejects. They now run as Ginkgo specs under one suite bootstrap. Every check and every per-operation case is kept. Assisted-by: Claude Code:claude-sonnet-5-5 go Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(addons): move the pin store tests to Ginkgo The pin service, file store, sweep and shared store contract tests used the testing package calls that forbidigo rejects. The store contract is now a function that registers its specs for each store, so the file store, the memory-only store and the database store run the same cases. Assisted-by: Claude Code:claude-sonnet-5-5 go Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(addons): move the remaining add-on tests to Ginkgo The built-in catalog, tool arguments, loopback carrier, host operation contract, packaging, application, config, CLI and endpoint tests used the testing package calls that forbidigo rejects. They now run as Ginkgo specs. The endpoint tests also drop the unchecked Close errors that errcheck reports when the auth tag is on. Assisted-by: Claude Code:claude-sonnet-5-5 go Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(ui): wait for the targeted Reinstall button before the install click The "generic deletion blocks targeted install at confirmation" spec dispatches a popstate to set the target node, then clicks Reinstall with a script click. The click can run before the targeted page has rendered or while the button is still disabled, so no install request is sent and the poll on the install count times out. It failed 1 run in 10 with two workers and on every retry in CI. The spec now waits for the button to be enabled first. The assertions are unchanged. Assisted-by: Claude Code:claude-sonnet-5-5 playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * chore(addons): refresh the voice package digest in the first-party index The Voice add-on became one page with tabs and got a new icon, so the digest in gallery/addons/index.yaml no longer matched the build. Render the entry again with addonpkg catalog over a locally built linux/amd64 package; the main page is now voice. The other entries are unchanged. Assisted-by: Claude Code:claude-sonnet-5-5 go node Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(ui): wait for the target node's Reinstall button after the popstate The "generic deletion blocks targeted install at confirmation" spec dispatches a popstate to set the target node, then waits for a button named Reinstall and clicks it. Until React renders the targeted page, the page still draws the generic Reinstall button. It is enabled and has the same name, so the wait passed on it, the click started a global install, and no node install request was sent. The poll on the install count timed out with the confirm dialog still open. With the CPU throttled to 8x, the spec failed on 20 of 20 runs, and the button it clicked had the title "Reinstall". The spec now waits for the button titled "Reinstall on <node>". With the throttle it passes 30 of 30 runs. The assertions are unchanged. Assisted-by: Claude Code:claude-sonnet-5-5 playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(ui): give the Studio hand-off spec a budget for the cold bundle load The "a result made through a hand-off records which result it came from" spec opens the Studio add-on straight from an address, twice. Each is a cold load: the page shows "Loading" until the add-on module has run, and the next assertion had the default five seconds. The load takes about two seconds on an idle run and seven to ten under CPU load, so the spec failed on a loaded machine with the hand-off note not yet drawn. With the CPU throttled to 6x and eight busy loops running, it failed on 21 of 30 runs. The first assertion after each load now waits up to 20 seconds, and the spec then passed 30 of 30 under the same load. The assertions are unchanged. Assisted-by: Claude Code:claude-sonnet-5-5 playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(addons): carry the identity page styles in the Face add-on The Face page is drawn with the shared identity views, but its style sheet held only the clip and error rules. The page, card, model list, known-faces table, enrol sheet and distance scale classes had no rules. They looked right only when the host had already loaded the style sheet of its own Faces page, which a visit through the add-on drawer does not do. Opened that way, the cards had no gap, the model list showed bullets, and the install buttons ran into the names. The Face sheet now holds the same identity rules as the core sheet, so the page looks the same whichever way it is opened. Assisted-by: Claude Code:claude-sonnet-5-5 playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(addons): scope the narrow-screen identity rules of the Voice add-on The rules for narrow screens (single-column pairs, smaller tool padding, compact rank rows) were copied into the Voice style sheet without their media query, so they applied at every width. They now sit in a max-width 720px query, and the reduced-motion rule in its own query, as in the core sheet. Assisted-by: Claude Code:claude-sonnet-5-5 playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(addons): drop the repeated title from the Voice and Face pages The add-on shell already titles the page, so the recognition pages showed the name twice: "Voice" above "Voices", "Face" above "Faces". Keep the supporting line and the model picker, as the Studio page does, and remove the unused title strings. Assisted-by: Claude Code:claude-sonnet-5-5 node playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(ui): replace the Pinned sidebar section with an Apps entry The sidebar no longer lists pinned add-ons. It shows one Apps entry that opens the add-ons drawer, with a Show all link below it that opens the same drawer. Pins are used from the drawer, where a pinned tile keeps its pin and move buttons. The server pins API is unchanged. Remove the PinnedNav component and its locale title, rename the items.addons label to Apps, and update the e2e specs and the add-ons documentation to match. Assisted-by: Claude Code:claude-sonnet-5-5 playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(addons): assert the single shell title on the Voice and Face pages The add-on shell now shows the one title, "Voice" or "Face", and the page no longer repeats it. The tests still looked for the h1 "Voices" and "Faces". Assert that the add-on page has exactly one h1 and that it is the shell title. The core pages keep their own "Voices" and "Faces" titles. Assisted-by: Claude Code:claude-sonnet-5-5 playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(addons): drop the repeated title from the Voice Library and Text to speech pages The add-on shell already titles the page "Voice", so these two tabs showed a second heading below it ("Speech voices", "Speak text"). Keep the supporting line, as the Studio and recognition pages do, and remove the unused title strings. The e2e spec now checks that each tab has exactly one h1, the shell title. Assisted-by: Claude Code:claude-sonnet-5-5 node playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(ui): list pinned apps under Apps in the sidebar A pinned app now shows as an indented child of the Apps entry, with its icon and title, in pin order. Show all stays the last child. The pins come from GET /api/addons/pins through the navigation context, and the apps from the add-on registry, which the drawer feeds on every list read, so the links follow the drawer. A pin without an installed app is not drawn, nothing extra shows when no app is pinned, and the children are hidden when the sidebar is collapsed to the rail. Assisted-by: Claude Code:claude-sonnet-5-5 node playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * docs(addons): say that pinned apps are listed under Apps in the sidebar The sidebar lists the pinned apps between Apps and Show all, in pin order. The pins section and the navigation section said that pins do not appear in the sidebar. Assisted-by: Claude Code:claude-sonnet-5-5 Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(ui): remove the Show all link under Apps in the sidebar The link repeated the Apps entry, which opens the same drawer, and looked redundant when no app was pinned. Apps is now the only add-on entry; pinned apps still list under it in pin order. The link, its locale key and the style comment are gone, and the e2e spec and the add-ons docs now say that Apps is the only entry. Assisted-by: Claude Code:claude-sonnet-5-5 node playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(ui): show a first-run card on Apps when nothing is installed An administrator who opens Apps with no add-on installed now sees a short card with three steps: choose a library, browse and install, start the add-on. Its button opens the Browse tab. The card is hidden once an add-on is installed and for anyone who cannot install. Assisted-by: Claude Code:claude-sonnet-5-5 node playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(ui): hide the pinned apps in the icon rail When the window is narrower than 1024 px the sidebar shrinks to the icon rail by CSS alone, without the collapsed class. The pinned app links were still drawn there, with the indent meant for the full sidebar, so their icons sat to the right of the rail and were cut off. Hide the pinned app links in both rail states. The Apps entry keeps its centred icon. The e2e spec checks that the rail shows no pinned app and that every icon is centred at 1280 px collapsed and at 1000 px. Assisted-by: Claude Code:claude-sonnet-5-5 node playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(ui): stop the backend redirect test racing the installed list The test reads the redirected URL right after the path changes. The Backends page then loads the installed list and drops a selected backend that is not installed, so the backend parameter was sometimes already gone when the test read it. The mock server has no llama-cpp, and about 15 of 40 repeated runs failed on the backend assertion. The redirect itself was correct, including show_all. Serve the selected backend in the installed list, so the page keeps the selection and the assertions stay as strict as before. Assisted-by: Claude Code:claude-sonnet-5-5 node playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(addons): accept a same-host Referer or Origin for human confirmation Browsers send no Sec-Fetch-* headers over plain HTTP on an address that is not localhost, so creating a resource from a LAN address failed with "Creating a resource requires your own browser session". When Sec-Fetch-Site is present it must still be same-origin with an empty destination, as before. When it is absent, Origin or, failing that, Referer must name the request host and port. A destination or mode that is present must still be the expected one. This matches the rule in BrowserProtection. The credential, token cookie, API key and tool-context checks are unchanged. Assisted-by: Claude Code:claude-sonnet-5-5 go Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(ui): keep hub entries off the Apps route in the sidebar The Build hub still owned /app/addons through its legacy Add-ons tab, so the sidebar lit both Apps and Build on the Apps page. A tab whose gate is closed now owns no route when the sidebar asks, so only the Apps entry is active there. The hubs keep their own routes, and the legacy navigation still gives /app/addons to the Build hub. Assisted-by: Claude Code:claude-sonnet-5-5 node playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(ui): label the pin control on app tiles and in the detail view The pin was a small icon-only button and hard to find. Each app tile now shows a button reading Pin, or Pinned with a filled pin, and the detail view has the same control in its header. Both toggle the same stored pin. The Apps grid lists pinned apps first, in pin order, then the others. The sidebar list and the server pins API are unchanged. Assisted-by: Claude Code:claude-sonnet-5-5 node playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * test(addons): check the Voice From a recording tab has one title The Library and Text to speech tabs already assert that the add-on shell title is the only h1. Do the same for the From a recording tab, so a heading added there later fails the navigation spec. Assisted-by: Claude Code:claude-sonnet-5-5 node playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(ui): stop the add-on shell drawing a title over add-on pages The app decides what its page shows. The shell drew the add-on name as a header above every add-on page, so an add-on could not choose its own title. The shell now draws no header on a live, loading or frozen add-on page; each add-on titles its own pages. The unavailable and missing-page states keep the name, because no add-on page is drawn there. The runtime and shell specs now check that the shell adds no page title. Assisted-by: Claude Code:claude-sonnet-5-5 node playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(addons): let each add-on draw its own page title The shell no longer titles add-on pages, so each add-on draws one h1 per page. Voice titles its tabs "Voices" (Recognition and From a recording), "Speech voices" (Library) and "Speak text" (Text to speech); "Add a speech voice" already had its own. Face draws "Faces", Studio "Studio" and Talk "Talk". Tables promotes the database list and database name from h2 to h1. Fine-tuning and Quantization already drew a title. The add-on unit tests and the navigation and Studio specs now assert exactly one h1 per page, with the page's own title. Assisted-by: Claude Code:claude-sonnet-5-5 node playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(addons): add a kind to library entries and read unknown kinds tolerantly A library entry now has an optional kind: addon (the default when it is absent), backend or model. Every index written before kinds existed stays valid and its entries are add-ons. A reader keeps the entries of the kinds it knows and skips the others without reading their fields, so a newer kind never makes an older host refuse the whole index. The refresh result and the library state report how many entries were skipped and of which kinds, and the refresh logs a warning. A kind that is not a plain kind name still makes the index malformed. Search lists add-ons unless the caller asks for a kind, and Resolve returns add-ons only, so an add-on install cannot be pointed at a backend image. A library policy may name the signer with an anchored identityRegex instead of an exact identity, so builds from master and from tags both verify. An add-on install refuses a policy that carries one. Assisted-by: Claude Code:claude-sonnet-5-5 go Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(backends): install a backend from a library entry A library can now list backends. An entry of kind backend names the image of the backend gallery by digest, and POST /backends/library/install installs it on the local node. The gallery stays the source of truth and its install path is the one used: the library resolves the entry, takes the signature policy from the library, pins the image by digest and calls the same install as the gallery. Installing a name that came from a gallery, another library or by hand is refused and changes nothing. The signature policy of a backend library names the signer with an anchored identityRegex, so images signed by the merge workflow on master and on tags both verify. A pattern that is not anchored is refused. An install is bounded by a size limit per kind: add-ons keep 512 MiB and a backend image defaults to 8 GiB, set with --addons-backend-max-bytes. The limit reads the manifest after the signature check and before any layer is fetched. The metadata of an installed backend records the library it came from. scripts/backends/cmd/backendcatalog renders entries from backend/index.yaml and pins them against the registry. The pilot is the CPU build of local-store, in gallery/backends/index.yaml. The library is registered on the first start only with --addons-backend-library, which is off by default. Assisted-by: Claude Code:claude-sonnet-5-5 go Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(ui): show the kind of library entries and install backends from them The Browse tab lists the entries of every kind this host reads and marks each one as an add-on or a backend. A backend installs through the backend route and not through the add-on lifecycle: the confirmation says that the backend gallery is not changed and that a backend runs native code, and a refusal of the host, such as a name installed from another origin, is shown with its own reason. The details give the kind, the alias and the signer pattern. The library editor can name the signer with a pattern. Without this a save would drop the pattern of a backend library. The Libraries tab reports the entries a refresh skipped because their kind is not read. Assisted-by: Claude Code:claude-sonnet-5-5 node playwright Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * docs(addons): describe backends in the library Document the entry kinds, how a reader skips a kind it does not know, the backend entry format, the signer identity pattern, the install route, the size limit of each kind, the pilot library and the command that renders it. The backend page links to it. Assisted-by: Claude Code:claude-sonnet-5-5 Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * feat(mcp): install a backend from a library entry The backend library route installs a backend from an add-on library entry, and the admin REST surface and the MCP catalog must stay in step. Add the install_library_backend tool with an in-process and an HTTP client, the route map entry, the safety-rule listing and a skill recipe. Listing library entries stays on the add-on routes, which the assistant does not expose, so no list tool is added. Assisted-by: Claude Code:claude-sonnet-5-5 Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * fix(ui): carry the add-on library keys in every locale The add-on library and backend library strings existed only in English, so the other locales had no value for them. Add the missing keys of the addons namespace to de, es, id, it, ko, pt-BR and zh-CN. The values are the English text until a translation is contributed. Assisted-by: Claude Code:claude-sonnet-5-5 Signed-off-by: Ettore Di Giacinto <mudler@localai.io> * Revert "feat(mcp): install a backend from a library entry" This reverts commit |