[EGD-4170] Cellular - modem reset (#929)

changelog.md

@@ -3,8 +3,10 @@
 ## Current release
 
 ### Added
+
 * `[settings][bluetooth]` Add "Phone name" window.
 * `[gui]` Add "ButtonOnOff" widget.
+* `[cellular]` Add support for modem reset
 
 ### Changed
 

module-cellular/at/Commands.hpp

@@ -96,6 +96,7 @@ namespace at
         ATD,  /// setup call
         IPR,  /// set baudrate
         CMUX, /// setup cmux params
+        CFUN, /// set phone functionality
         CMGS, /// sms
         QCMGS,
         CREG,       /// network registration status
@@ -122,9 +123,14 @@ namespace at
         DISABLE_TIME_ZONE_UPDATE,
         DISABLE_TIME_ZONE_REPORTING,
         ENABLE_NETWORK_REGISTRATION_URC,
-        SET_SMS_TEXT_MODE_UCS2
+        SET_SMS_TEXT_MODE_UCS2,
+        CFUN_RESET,
+        CFUN_MIN_FUNCTIONALITY,    /// Set minimum functionality
+        CFUN_FULL_FUNCTIONALITY,   /// Full functionality
+        CFUN_DISABLE_TRANSMITTING, /// Disable the ME from both transmitting and receiving RF signals
     };
 
+    // below timeouts are defined in Quectel_EC25&EC21_AT_Commands_Manual_V1.3.pdf
     inline auto factory(AT at) -> const Cmd &
     {
         static const std::map<AT, const Cmd> fact{
@@ -164,6 +170,11 @@ namespace at
             {AT::ATD, {"ATD"}},
             {AT::IPR, {"AT+IPR="}},
             {AT::CMUX, {"AT+CMUX="}},
+            {AT::CFUN, {"AT+CFUN=", 15000}},
+            {AT::CFUN_RESET, {"AT+CFUN=1,1", 15000}},
+            {AT::CFUN_MIN_FUNCTIONALITY, {"AT+CFUN=0", 15000}},
+            {AT::CFUN_FULL_FUNCTIONALITY, {"AT+CFUN=1", 15000}},
+            {AT::CFUN_DISABLE_TRANSMITTING, {"AT+CFUN=4", 15000}},
             {AT::CMGS, {"AT+CMGS=\""}},
             {AT::QCMGS, {"AT+QCMGS=\""}},
             {AT::CREG, {"AT+CREG?", default_doc_timeout}},

module-services/service-cellular/ServiceCellular.cpp

@@ -243,6 +243,36 @@ void ServiceCellular::registerMessageHandlers()
     handle_CellularGetChannelMessage();
 }
 
+bool ServiceCellular::resetCellularModule(ResetType type)
+{
+    LOG_DEBUG("Cellular modem reset. Type %d", static_cast<int>(type));
+
+    auto channel = cmux->get(TS0710::Channel::Commands);
+    if (!channel) {
+        LOG_ERROR("Bad channel");
+        return false;
+    }
+
+    switch (type) {
+    case ResetType::SoftReset:
+        if (auto response = channel->cmd(at::AT::CFUN_RESET); response.code == at::Result::Code::OK) {
+            return true;
+        }
+        LOG_ERROR("Cellular modem reset failed.");
+        return false;
+    case ResetType::PowerCycle:
+        cmux->TurnOffModem();
+        cmux->TurnOnModem();
+        isAfterForceReboot = true;
+        return true;
+    case ResetType::HardReset:
+        cmux->ResetModem();
+        isAfterForceReboot = true;
+        return true;
+    }
+    return false;
+}
+
 void ServiceCellular::change_state(cellular::StateChange *msg)
 {
     assert(msg);
@@ -367,6 +397,11 @@ bool ServiceCellular::handle_power_up_procedure()
 
 bool ServiceCellular::handle_power_up_in_progress_procedure(void)
 {
+    if (isAfterForceReboot) {
+        constexpr auto msModemUartInitTime = 12000;
+        vTaskDelay(pdMS_TO_TICKS(msModemUartInitTime));
+        isAfterForceReboot = false;
+    }
     auto ret = cmux->BaudDetectProcedure();
     if (ret == TS0710::ConfState::Success) {
         state.set(this, cellular::State::ST::CellularConfProcedure);
@@ -406,6 +441,7 @@ bool ServiceCellular::handle_power_down_waiting()
 bool ServiceCellular::handle_power_down()
 {
     LOG_DEBUG("Powered Down");
+    isAfterForceReboot = true;
     cmux.reset();
     cmux = std::make_unique<TS0710>(PortSpeed_e::PS460800, this);
     InitHandler();
@@ -801,11 +837,19 @@ sys::Message_t ServiceCellular::DataReceivedHandler(sys::DataMessage *msgl, sys:
         if (msg != nullptr) {
             if (board == bsp::Board::T4) {
                 auto status_pin = msg->state;
-                if (status_pin == value::ACTIVE && state.get() == State::ST::PowerUpProcedure) {
-                    state.set(this, State::ST::PowerUpInProgress); // and go to baud detect as usual
+                if (status_pin == value::ACTIVE) {
+                    if (state.get() == State::ST::PowerUpProcedure) {
+                        state.set(this, State::ST::PowerUpInProgress); // and go to baud detect as usual
+                    }
+                    else {
+                        // asynchronous power toggle should fall back to PowerDown regardless the state
+                        state.set(this, State::ST::PowerDown);
+                    }
                 }
-                else if (status_pin == value::INACTIVE && state.get() == State::ST::PowerDownWaiting) {
-                    state.set(this, State::ST::PowerDown);
+                else if (status_pin == value::INACTIVE) {
+                    if (isAfterForceReboot == true || state.get() == State::ST::PowerDownWaiting) {
+                        state.set(this, State::ST::PowerDown);
+                    }
                 }
             }
         }

module-services/service-cellular/ServiceCellular.hpp

@@ -98,6 +98,15 @@ class ServiceCellular : public sys::Service
 
     ussd::State ussdState = ussd::State::none;
 
+    enum class ResetType
+    {
+        SoftReset,  //<! AT CFUN reset
+        PowerCycle, //<! PWRKEY pin toggle
+        HardReset   //<! RESET_N pin
+    };
+    bool resetCellularModule(ResetType type);
+    bool isAfterForceReboot = false;
+
     /// one point of state change handling
     void change_state(cellular::StateChange *msg);