PurePhone repository

Quickstart

Prior to any build setup environment, need to be run once. (See: ## Run provisioning) cd config && ./bootstrap.sh

Super quick and dirty to run app on linux:

cp ./env.cmake.sample ./env.cmake && sed -i "s:<HOME>:$HOME:" env.cmake     # set env.cmake
git submodule update --init --recursive                                     # initialize submodules
cd ./config/ && ./bootstrap.sh && cd ../                                    # bootstrap requirements
./rebuild.sh && make -C build -j4                                           # run rebuild (cmake configuration) and build
cd build && ./PurePhone                                                     # run PurePhone - emulator screen will pop up

Super quick and dirty to run app on Phone

Prior to all - install JLink driver (see ## Install JLink driver)

cp ./env.cmake.sample ./env.cmake && sed -i "s:<HOME>:$HOME:" env.cmake
git submodule update --init --recursive
cd ./config/ && ./bootstrap.sh && cd ../
./rebuild.sh rt1051 && make -C build -j4

now in 3 separate consoles

Start JLink server

./StartJLinkServer.sh

Load app with GDB via JLink connected to PurePhone

./run.sh

Catch logs from PurePhone from JLink RTT and write them to /tmp/log.txt

JLinkRTTClient | tee /tmp/log.txt

Longstart

Run provisioning

There is provisioning script ./config/bootstrap.sh run it to install all dependencies - written for Ubuntu tested on 18.10

• This script will require sudo (for apt)
• needed cmake and GCC will be installed by default to ${HOME} - in case of other needs, change it
• script doesn't install ccache, but if ccache is on system - it's support is added to env.cmake.sample
• need to be run once (not more on restart or anything)

cd config && ./bootstrap.sh

Install JLink driver:

We use JLink driver in version JLink v634f, for ubuntu download from here: tested JLink we use

To install this driver on linux: sudo dpkg -i JLink_Linux_V634f_x86_64.deb

First time repo checkout with submodules

git submodule update --init --recursive

Building project

after running provisioning you are ready to build project for both linux and rt1051 target

Repo update with submodules

git pull --recurse-submodules

Documentation:

• doc/config
• doc/bluetooth
  • ./module-bsp/bsp/bluetooth
  • ./module-bluetooth/
• module-lwip
• doc/database
• Linux emulator keyboard bindings

Linux Bluetooth device

Bluetooth service by default initializes bluetooth device. On linux it's tellit developer kit plugged via USB-CDC. To properly inteface with bluetooth telit device (and not have conflicts in names) please add following script as: /etc/udev/rules.d/99-purephone.rules on linux.

ACTION=="add", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", ATTRS{serial}=="AL02ZDVH", GROUP="dialout", SYMLINK+="telit"
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", MODE="666", GROUP="dialout"

This will enable you to use Bluetooth telit board as /dev/telit which is expected by code. To access devices without root priviledges add yourselve to dialout group. sudo usermod -a -G dialout $USER

For changes to take place run: sudo udevadm control --reload-rules && sudo udevadm trigger