mirror/OpenRGB
1
0 Fork 0
mirror of https://github.com/CalcProgrammer1/OpenRGB.git synced 2026-09-12 21:28:30 -04:00
Code Issues Packages Projects Releases Wiki Activity

Clean up MSI flags handling and add comments

Browse Source
This commit is contained in:
Adam Honse committed 2026-09-08 00:41:38 -05:00
1 parent a42352c867
commit aaa7cb0886
4 files changed
+282 -134
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

Controllers/MSIMotherboardController/MSIMotherboard112Controller/MSIMotherboard112Controller.cpp
+66 -41
View File
@@ -38,17 +38,24 @@ MSIMotherboard112Controller::MSIMotherboard112Controller(hid_device* handle, con
location = path;
name = dev_name;
if(dev)
{
ReadFwVersion();
ReadSettings();
}
/*-----------------------------------------------------*\
| Perform initial reads - get the controller's firmware |
| version and then read the controller's active |
| configuration data |
\*-----------------------------------------------------*/
ReadFwVersion();
ReadSettings();
/*-----------------------------------------------------*\
| Initialize save flag |
| The last byte of the packet is the save flag. This |
| byte is stored as a zero in the data flash, but is |
| set to 1 at the protocol level to tell the firmware |
| to save the active configuration to flash. |
| Also set onboard zone to act as sync master for all |
| of the onboard LEDs. |
\*-----------------------------------------------------*/
data.save_data = 0;
data.on_board_led.colorFlags = 0x81; // force MS bit of color flags to 1 to have expected zone control
data.save_data = 0;
data.on_board_led.colorFlags = MSI_COLOR_FLAG_USE_CUSTOM_COLOR | MSI_COLOR_FLAG_SYNC_SETTING_ONBOARD;
/*-----------------------------------------------------*\
| Initialize zone based per LED data |
@@ -56,25 +63,25 @@ MSIMotherboard112Controller::MSIMotherboard112Controller(hid_device* handle, con
numof_onboard_leds = 7;
supported_zones = &zones_set;
zone_based_per_led_data.j_rgb_1.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.j_rgb_1.colorFlags = BITSET(zone_based_per_led_data.j_rgb_1.colorFlags, true, 7u);
zone_based_per_led_data.j_rainbow_1.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.j_rainbow_1.colorFlags = BITSET(zone_based_per_led_data.j_rainbow_1.colorFlags, true, 7u);
zone_based_per_led_data.on_board_led.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.on_board_led.colorFlags = BITSET(zone_based_per_led_data.on_board_led.colorFlags, true, 7u);
zone_based_per_led_data.on_board_led_1.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.on_board_led_1.colorFlags = BITSET(zone_based_per_led_data.on_board_led_1.colorFlags, true, 7u);
zone_based_per_led_data.on_board_led_2.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.on_board_led_2.colorFlags = BITSET(zone_based_per_led_data.on_board_led_2.colorFlags, true, 7u);
zone_based_per_led_data.on_board_led_3.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.on_board_led_3.colorFlags = BITSET(zone_based_per_led_data.on_board_led_3.colorFlags, true, 7u);
zone_based_per_led_data.on_board_led_4.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.on_board_led_4.colorFlags = BITSET(zone_based_per_led_data.on_board_led_4.colorFlags, true, 7u);
zone_based_per_led_data.on_board_led_5.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.on_board_led_5.colorFlags = BITSET(zone_based_per_led_data.on_board_led_5.colorFlags, true, 7u);
zone_based_per_led_data.on_board_led_6.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2 << 2;
zone_based_per_led_data.on_board_led_6.colorFlags = BITSET(zone_based_per_led_data.on_board_led_6.colorFlags, true, 7u);
zone_based_per_led_data.save_data = 0;
zone_based_per_led_data.j_rgb_1.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.j_rgb_1.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.j_rainbow_1.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.j_rainbow_1.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.on_board_led.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.on_board_led.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.on_board_led_1.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.on_board_led_1.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.on_board_led_2.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.on_board_led_2.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.on_board_led_3.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.on_board_led_3.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.on_board_led_4.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.on_board_led_4.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.on_board_led_5.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.on_board_led_5.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.on_board_led_6.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.on_board_led_6.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.save_data = 0;
direct_mode = false;
}
@@ -93,29 +100,38 @@ void MSIMotherboard112Controller::SetMode
bool rainbow_color
)
{
/*-----------------------------------------------------*\
| Get the zone data pointer within the configuration |
| data buffer |
\*-----------------------------------------------------*/
ZoneData* zone_data = GetZoneData(data, zone);
/*-----------------------------------------------------*\
| Return if zone is invalid |
\*-----------------------------------------------------*/
if(zone_data == nullptr)
{
return;
}
if (zone <= MSI_ZONE_ON_BOARD_LED_0)
if(zone <= MSI_ZONE_ON_BOARD_LED_0)
{
zone_data->effect = mode;
zone_data->speedAndBrightnessFlags = (brightness << 2) | (speed & 0x03);
zone_data->colorFlags = BITSET(zone_data->colorFlags, !rainbow_color, 7u);
zone_data->speedAndBrightnessFlags = ((brightness << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT) & MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_MASK)
| ((speed << MSI_SPEED_BRIGHTNESS_FLAG_SPEED_SHIFT) & MSI_SPEED_BRIGHTNESS_FLAG_SPEED_MASK);
zone_data->colorFlags = (rainbow_color ? (zone_data->colorFlags & ~MSI_COLOR_FLAG_USE_CUSTOM_COLOR)
: (zone_data->colorFlags | MSI_COLOR_FLAG_USE_CUSTOM_COLOR));
zone_data->padding = 0x00;
if(mode > MSI_MODE_DOUBLE_FLASHING)
{
zone_data->speedAndBrightnessFlags |= SYNC_SETTING_JRGB;
zone_data->colorFlags |= SYNC_SETTING_ONBOARD;
zone_data->speedAndBrightnessFlags |= MSI_SPEED_BRIGHTNESS_FLAG_SYNC_SETTING_JRGB;
zone_data->colorFlags |= MSI_COLOR_FLAG_SYNC_SETTING_ONBOARD;
}
else
{
zone_data->speedAndBrightnessFlags &= ~SYNC_SETTING_JRGB;
zone_data->colorFlags &= ~SYNC_SETTING_ONBOARD;
zone_data->speedAndBrightnessFlags &= ~MSI_SPEED_BRIGHTNESS_FLAG_SYNC_SETTING_JRGB;
zone_data->colorFlags &= ~MSI_COLOR_FLAG_SYNC_SETTING_ONBOARD;
}
}
@@ -126,8 +142,10 @@ void MSIMotherboard112Controller::SetMode
if(zone_data != nullptr)
{
zone_data->effect = mode;
zone_data->speedAndBrightnessFlags = (brightness << 2) | (speed & 0x03);
zone_data->colorFlags = BITSET(zone_data->colorFlags, !rainbow_color, 7u);
zone_data->speedAndBrightnessFlags = ((brightness << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT) & MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_MASK)
| ((speed << MSI_SPEED_BRIGHTNESS_FLAG_SPEED_SHIFT) & MSI_SPEED_BRIGHTNESS_FLAG_SPEED_MASK);
zone_data->colorFlags = (rainbow_color ? (zone_data->colorFlags & ~MSI_COLOR_FLAG_USE_CUSTOM_COLOR)
: (zone_data->colorFlags | MSI_COLOR_FLAG_USE_CUSTOM_COLOR));
zone_data->padding = 0x00;
}
}
@@ -201,14 +219,21 @@ void MSIMotherboard112Controller::SetZoneColor
unsigned char blu2
)
{
/*-----------------------------------------------------*\
| Get the zone data pointer within the configuration |
| data buffer |
\*-----------------------------------------------------*/
ZoneData* zone_data = GetZoneData(data, zone);
/*-----------------------------------------------------*\
| Return if zone is invalid |
\*-----------------------------------------------------*/
if(zone_data == nullptr)
{
return;
}
if (zone <= MSI_ZONE_ON_BOARD_LED_0)
if(zone <= MSI_ZONE_ON_BOARD_LED_0)
{
zone_data->color.R = red1;
zone_data->color.G = grn1;
@@ -410,10 +435,10 @@ void MSIMotherboard112Controller::GetMode
/*-----------------------------------------------------*\
| Update pointers with data |
\*-----------------------------------------------------*/
mode = (MSI_MODE)zone_data->effect;
speed = (MSI_SPEED)(zone_data->speedAndBrightnessFlags & 0x03);
brightness = (MSI_BRIGHTNESS)((zone_data->speedAndBrightnessFlags >> 2) & 0x1F);
rainbow_color = (zone_data->colorFlags & 0x80) == 0 ? true : false;
mode = (MSI_MODE) zone_data->effect;
speed = (MSI_SPEED) ((zone_data->speedAndBrightnessFlags >> MSI_SPEED_BRIGHTNESS_FLAG_SPEED_SHIFT) & MSI_SPEED_BRIGHTNESS_FLAG_SPEED_MASK);
brightness = (MSI_BRIGHTNESS)((zone_data->speedAndBrightnessFlags >> MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT) & MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_MASK);
rainbow_color = ((zone_data->colorFlags & MSI_COLOR_FLAG_USE_CUSTOM_COLOR) == 0 ? false : true);
color = ToRGBColor(zone_data->color.R, zone_data->color.G, zone_data->color.B);
}
Controllers/MSIMotherboardController/MSIMotherboard162Controller/MSIMotherboard162Controller.cpp
+55 -25
View File
@@ -85,24 +85,32 @@ MSIMotherboard162Controller::MSIMotherboard162Controller(hid_device* handle, con
location = path;
name = dev_name;
if(dev)
{
ReadFwVersion();
ReadSettings();
}
/*-----------------------------------------------------*\
| Initialize save flag |
| Perform initial reads - get the controller's firmware |
| version and then read the controller's active |
| configuration data |
\*-----------------------------------------------------*/
data.save_data = 0;
data.on_board_led.colorFlags = 0x81; // force MS bit of color flags to 1 to have expectd zone control
ReadFwVersion();
ReadSettings();
/*-----------------------------------------------------*\
| Initialize zone based per LED data |
| The last byte of the packet is the save flag. This |
| byte is stored as a zero in the data flash, but is |
| set to 1 at the protocol level to tell the firmware |
| to save the active configuration to flash. |
| Also set onboard zone to act as sync master for all |
| of the onboard LEDs. |
\*-----------------------------------------------------*/
data.save_data = 0;
data.on_board_led.colorFlags = MSI_COLOR_FLAG_USE_CUSTOM_COLOR | MSI_COLOR_FLAG_SYNC_SETTING_ONBOARD;
/*-----------------------------------------------------*\
| Search for the board configuration matching this |
| board. |
\*-----------------------------------------------------*/
const mystic_light_162_config* board_config = nullptr;
for(std::size_t i = 0; i < NUMOF_CONFIGS; ++i)
for(std::size_t i = 0; i < NUMOF_CONFIGS; i++)
{
if (board_configs[i].pid == pid)
{
@@ -111,6 +119,10 @@ MSIMotherboard162Controller::MSIMotherboard162Controller(hid_device* handle, con
}
}
/*-----------------------------------------------------*\
| Fill in the number of each zone type based on the |
| board configuration |
\*-----------------------------------------------------*/
if(board_config != nullptr)
{
numof_onboard_leds = board_config->numof_onboard_leds;
@@ -137,29 +149,38 @@ void MSIMotherboard162Controller::SetMode
bool rainbow_color
)
{
/*-----------------------------------------------------*\
| Get the zone data pointer within the configuration |
| data buffer |
\*-----------------------------------------------------*/
ZoneData* zone_data = GetZoneData(data, zone);
/*-----------------------------------------------------*\
| Return if zone is invalid |
\*-----------------------------------------------------*/
if(zone_data == nullptr)
{
return;
}
if (zone <= MSI_ZONE_ON_BOARD_LED_0)
if(zone <= MSI_ZONE_ON_BOARD_LED_0)
{
zone_data->effect = mode;
zone_data->speedAndBrightnessFlags = (brightness << 2) | (speed & 0x03);
zone_data->colorFlags = BITSET(zone_data->colorFlags, !rainbow_color, 7u);
zone_data->speedAndBrightnessFlags = ((brightness << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT) & MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_MASK)
| ((speed << MSI_SPEED_BRIGHTNESS_FLAG_SPEED_SHIFT) & MSI_SPEED_BRIGHTNESS_FLAG_SPEED_MASK);
zone_data->colorFlags = (rainbow_color ? (zone_data->colorFlags & ~MSI_COLOR_FLAG_USE_CUSTOM_COLOR)
: (zone_data->colorFlags | MSI_COLOR_FLAG_USE_CUSTOM_COLOR));
zone_data->padding = 0x00;
if(mode > MSI_MODE_DOUBLE_FLASHING)
{
zone_data->speedAndBrightnessFlags |= SYNC_SETTING_JRGB;
zone_data->colorFlags |= SYNC_SETTING_ONBOARD;
zone_data->speedAndBrightnessFlags |= MSI_SPEED_BRIGHTNESS_FLAG_SYNC_SETTING_JRGB;
zone_data->colorFlags |= MSI_COLOR_FLAG_SYNC_SETTING_ONBOARD;
}
else
{
zone_data->speedAndBrightnessFlags &= ~SYNC_SETTING_JRGB;
zone_data->colorFlags &= ~SYNC_SETTING_ONBOARD;
zone_data->speedAndBrightnessFlags &= ~MSI_SPEED_BRIGHTNESS_FLAG_SYNC_SETTING_JRGB;
zone_data->colorFlags &= ~MSI_COLOR_FLAG_SYNC_SETTING_ONBOARD;
}
}
@@ -170,8 +191,10 @@ void MSIMotherboard162Controller::SetMode
if(zone_data != nullptr)
{
zone_data->effect = mode;
zone_data->speedAndBrightnessFlags = (brightness << 2) | (speed & 0x03);
zone_data->colorFlags = BITSET(zone_data->colorFlags, !rainbow_color, 7u);
zone_data->speedAndBrightnessFlags = ((brightness << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT) & MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_MASK)
| ((speed << MSI_SPEED_BRIGHTNESS_FLAG_SPEED_SHIFT) & MSI_SPEED_BRIGHTNESS_FLAG_SPEED_MASK);
zone_data->colorFlags = (rainbow_color ? (zone_data->colorFlags & ~MSI_COLOR_FLAG_USE_CUSTOM_COLOR)
: (zone_data->colorFlags | MSI_COLOR_FLAG_USE_CUSTOM_COLOR));
zone_data->padding = 0x00;
}
}
@@ -238,14 +261,21 @@ void MSIMotherboard162Controller::SetZoneColor
unsigned char blu2
)
{
/*-----------------------------------------------------*\
| Get the zone data pointer within the configuration |
| data buffer |
\*-----------------------------------------------------*/
ZoneData* zone_data = GetZoneData(data, zone);
/*-----------------------------------------------------*\
| Return if zone is invalid |
\*-----------------------------------------------------*/
if(zone_data == nullptr)
{
return;
}
if (zone <= MSI_ZONE_ON_BOARD_LED_0)
if(zone <= MSI_ZONE_ON_BOARD_LED_0)
{
zone_data->color.R = red1;
zone_data->color.G = grn1;
@@ -431,10 +461,10 @@ void MSIMotherboard162Controller::GetMode
/*-----------------------------------------------------*\
| Update pointers with data |
\*-----------------------------------------------------*/
mode = (MSI_MODE)zone_data->effect;
speed = (MSI_SPEED)(zone_data->speedAndBrightnessFlags & 0x03);
brightness = (MSI_BRIGHTNESS)((zone_data->speedAndBrightnessFlags >> 2) & 0x1F);
rainbow_color = (zone_data->colorFlags & 0x80) == 0 ? true : false;
mode = (MSI_MODE) zone_data->effect;
speed = (MSI_SPEED) ((zone_data->speedAndBrightnessFlags >> MSI_SPEED_BRIGHTNESS_FLAG_SPEED_SHIFT) & MSI_SPEED_BRIGHTNESS_FLAG_SPEED_MASK);
brightness = (MSI_BRIGHTNESS)((zone_data->speedAndBrightnessFlags >> MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT) & MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_MASK);
rainbow_color = ((zone_data->colorFlags & MSI_COLOR_FLAG_USE_CUSTOM_COLOR) == 0 ? false : true);
color = ToRGBColor(zone_data->color.R, zone_data->color.G, zone_data->color.B);
}
Controllers/MSIMotherboardController/MSIMotherboard185Controller/MSIMotherboard185Controller.cpp
+145 -61
View File
@@ -33,8 +33,8 @@ using namespace std::chrono_literals;
#define JCORSAIR_MAX_LED_COUNT 240
#define MSI_DIRECT_MODE 0x25
#define PER_LED_BASIC_SYNC_MODE (0x80 | SYNC_SETTING_ONBOARD | SYNC_SETTING_JPIPE1 | SYNC_SETTING_JPIPE2)
#define PER_LED_FULL_SYNC_MODE (PER_LED_BASIC_SYNC_MODE | SYNC_SETTING_JRAINBOW1 | SYNC_SETTING_JRAINBOW2 | SYNC_SETTING_JCORSAIR)
#define PER_LED_BASIC_SYNC_MODE (MSI_COLOR_FLAG_USE_CUSTOM_COLOR | MSI_COLOR_FLAG_SYNC_SETTING_ONBOARD | MSI_COLOR_FLAG_SYNC_SETTING_JPIPE1 | MSI_COLOR_FLAG_SYNC_SETTING_JPIPE2)
#define PER_LED_FULL_SYNC_MODE (PER_LED_BASIC_SYNC_MODE | MSI_COLOR_FLAG_SYNC_SETTING_JRAINBOW1 | MSI_COLOR_FLAG_SYNC_SETTING_JRAINBOW2 | MSI_COLOR_FLAG_SYNC_SETTING_JCORSAIR)
struct mystic_light_185_config
{
@@ -371,18 +371,27 @@ MSIMotherboard185Controller::MSIMotherboard185Controller(hid_device* handle, con
location = path;
name = dev_name;
if(dev)
{
ReadFwVersion();
ReadSettings();
}
/*-----------------------------------------------------*\
| Perform initial reads - get the controller's firmware |
| version and then read the controller's active |
| configuration data |
\*-----------------------------------------------------*/
ReadFwVersion();
ReadSettings();
/*-----------------------------------------------------*\
| Common PID boards embed their virtual PID in the |
| serial number, extract it |
\*-----------------------------------------------------*/
if(pid == MSI_USB_PID_COMMON)
{
std::string pidStr(GetSerial().substr(0, 4));
pid = std::stoi(pidStr, nullptr, 16);
}
/*-----------------------------------------------------*\
| Determine if this board has mixed-mode support |
\*-----------------------------------------------------*/
mixed_mode_support = false;
if(pid >= 0x7D03)
@@ -391,14 +400,23 @@ MSIMotherboard185Controller::MSIMotherboard185Controller(hid_device* handle, con
}
/*-----------------------------------------------------*\
| Initialize save flag and some static settings |
| The last byte of the packet is the save flag. This |
| byte is stored as a zero in the data flash, but is |
| set to 1 at the protocol level to tell the firmware |
| to save the active configuration to flash. |
| Also set onboard zone to act as sync master for all |
| of the onboard LEDs. |
\*-----------------------------------------------------*/
data.save_data = 0;
data.on_board_led.colorFlags = 0x80 | SYNC_SETTING_ONBOARD; // always enable onboard sync flag to have expected zone control
data.save_data = 0;
data.on_board_led.colorFlags = MSI_COLOR_FLAG_USE_CUSTOM_COLOR | MSI_COLOR_FLAG_SYNC_SETTING_ONBOARD;
/*-----------------------------------------------------*\
| Search for the board configuration matching this |
| board. |
\*-----------------------------------------------------*/
const mystic_light_185_config* board_config = nullptr;
for(std::size_t i = 0; i < NUMOF_CONFIGS; ++i)
for(std::size_t i = 0; i < NUMOF_CONFIGS; i++)
{
if(board_configs[i].pid == pid)
{
@@ -407,6 +425,10 @@ MSIMotherboard185Controller::MSIMotherboard185Controller(hid_device* handle, con
}
}
/*-----------------------------------------------------*\
| Fill in the number of each zone type based on the |
| board configuration |
\*-----------------------------------------------------*/
if(board_config != nullptr)
{
numof_onboard_leds = board_config->numof_onboard_leds;
@@ -500,7 +522,7 @@ MSIMotherboard185Controller::MSIMotherboard185Controller(hid_device* handle, con
enable_per_led_msg.j_corsair_outerll120.speedAndBrightnessFlags = 0x28;
enable_per_led_msg.j_corsair_outerll120.colorFlags = 0x80;
enable_per_led_msg.on_board_led.effect = MSI_DIRECT_MODE;
enable_per_led_msg.on_board_led.speedAndBrightnessFlags = 0x29 | SYNC_SETTING_JRGB;
enable_per_led_msg.on_board_led.speedAndBrightnessFlags = 0x29 | MSI_SPEED_BRIGHTNESS_FLAG_SYNC_SETTING_JRGB;
enable_per_led_msg.on_board_led.colorFlags = PER_LED_FULL_SYNC_MODE;
enable_per_led_msg.on_board_led_1.speedAndBrightnessFlags = 0x28;
enable_per_led_msg.on_board_led_1.colorFlags = 0x80;
@@ -526,38 +548,38 @@ MSIMotherboard185Controller::MSIMotherboard185Controller(hid_device* handle, con
/*-----------------------------------------------------*\
| Initialize zone based per LED data |
\*-----------------------------------------------------*/
zone_based_per_led_data.j_rgb_1.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.j_rgb_1.colorFlags = BITSET(zone_based_per_led_data.j_rgb_1.colorFlags, true, 7u);
zone_based_per_led_data.j_pipe_1.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.j_pipe_1.colorFlags = BITSET(zone_based_per_led_data.j_pipe_1.colorFlags, true, 7u);
zone_based_per_led_data.j_pipe_2.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.j_pipe_2.colorFlags = BITSET(zone_based_per_led_data.j_pipe_2.colorFlags, true, 7u);
zone_based_per_led_data.j_rainbow_1.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.j_rainbow_1.colorFlags = BITSET(zone_based_per_led_data.j_rainbow_1.colorFlags, true, 7u);
zone_based_per_led_data.j_rainbow_2.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.j_rainbow_2.colorFlags = BITSET(zone_based_per_led_data.j_rainbow_2.colorFlags, true, 7u);
zone_based_per_led_data.on_board_led.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.on_board_led.colorFlags = BITSET(zone_based_per_led_data.on_board_led.colorFlags, true, 7u);
zone_based_per_led_data.on_board_led_1.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.on_board_led_1.colorFlags = BITSET(zone_based_per_led_data.on_board_led_1.colorFlags, true, 7u);
zone_based_per_led_data.on_board_led_2.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.on_board_led_2.colorFlags = BITSET(zone_based_per_led_data.on_board_led_2.colorFlags, true, 7u);
zone_based_per_led_data.on_board_led_3.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.on_board_led_3.colorFlags = BITSET(zone_based_per_led_data.on_board_led_3.colorFlags, true, 7u);
zone_based_per_led_data.on_board_led_4.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.on_board_led_4.colorFlags = BITSET(zone_based_per_led_data.on_board_led_4.colorFlags, true, 7u);
zone_based_per_led_data.on_board_led_5.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.on_board_led_5.colorFlags = BITSET(zone_based_per_led_data.on_board_led_5.colorFlags, true, 7u);
zone_based_per_led_data.on_board_led_6.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2 << 2;
zone_based_per_led_data.on_board_led_6.colorFlags = BITSET(zone_based_per_led_data.on_board_led_6.colorFlags, true, 7u);
zone_based_per_led_data.on_board_led_7.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100;
zone_based_per_led_data.on_board_led_7.colorFlags = BITSET(zone_based_per_led_data.on_board_led_7.colorFlags, true, 7u);
zone_based_per_led_data.on_board_led_8.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.on_board_led_8.colorFlags = BITSET(zone_based_per_led_data.on_board_led_8.colorFlags, true, 7u);
zone_based_per_led_data.on_board_led_9.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.on_board_led_9.colorFlags = BITSET(zone_based_per_led_data.on_board_led_9.colorFlags, true, 7u);
zone_based_per_led_data.j_rgb_2.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << 2;
zone_based_per_led_data.j_rgb_2.colorFlags = BITSET(zone_based_per_led_data.j_rgb_2.colorFlags, true, 7u);
zone_based_per_led_data.j_rgb_1.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.j_rgb_1.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.j_pipe_1.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.j_pipe_1.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.j_pipe_2.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.j_pipe_2.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.j_rainbow_1.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.j_rainbow_1.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.j_rainbow_2.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.j_rainbow_2.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.on_board_led.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.on_board_led.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.on_board_led_1.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.on_board_led_1.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.on_board_led_2.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.on_board_led_2.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.on_board_led_3.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.on_board_led_3.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.on_board_led_4.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.on_board_led_4.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.on_board_led_5.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.on_board_led_5.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.on_board_led_6.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.on_board_led_6.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.on_board_led_7.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.on_board_led_7.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.on_board_led_8.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.on_board_led_8.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.on_board_led_9.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.on_board_led_9.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.j_rgb_2.speedAndBrightnessFlags = MSI_BRIGHTNESS_LEVEL_100 << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT;
zone_based_per_led_data.j_rgb_2.colorFlags |= MSI_COLOR_FLAG_USE_CUSTOM_COLOR;
zone_based_per_led_data.save_data = 0;
direct_mode = false;
@@ -584,40 +606,74 @@ void MSIMotherboard185Controller::SetMode
return;
}
/*-----------------------------------------------------*\
| Get the zone data pointer within the configuration |
| data buffer |
\*-----------------------------------------------------*/
ZoneData* zone_data = GetZoneData(data, zone);
/*-----------------------------------------------------*\
| Return if zone is invalid |
\*-----------------------------------------------------*/
if(zone_data == nullptr)
{
return;
}
/*-----------------------------------------------------*\
| Update the zone's mode and mode parameters |
\*-----------------------------------------------------*/
zone_data->effect = mode;
zone_data->speedAndBrightnessFlags = (brightness << 2) | (speed & 0x03);
zone_data->colorFlags = BITSET(zone_data->colorFlags, !rainbow_color, 7u);
zone_data->speedAndBrightnessFlags = ((brightness << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT) & MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_MASK)
| ((speed << MSI_SPEED_BRIGHTNESS_FLAG_SPEED_SHIFT) & MSI_SPEED_BRIGHTNESS_FLAG_SPEED_MASK);
zone_data->colorFlags = (rainbow_color ? (zone_data->colorFlags & ~MSI_COLOR_FLAG_USE_CUSTOM_COLOR)
: (zone_data->colorFlags | MSI_COLOR_FLAG_USE_CUSTOM_COLOR));
/*-----------------------------------------------------*\
| J_RAINBOW_3 zone needs padding of 4 |
\*-----------------------------------------------------*/
zone == MSI_ZONE_J_RAINBOW_3 ? zone_data->padding = 4 : zone_data->padding = 0;
/*-----------------------------------------------------*\
| Get the zone data pointer to the on-board LED 0 zone |
\*-----------------------------------------------------*/
ZoneData* on_board_zone = GetZoneData(data, MSI_ZONE_ON_BOARD_LED_0);
/*-----------------------------------------------------*\
| If the zone is JRGB or JPIPE and the board has no |
| onboard LEDs, set the onboard zone to this zone's |
| settings |
\*-----------------------------------------------------*/
if(no_onboards && ((zone == MSI_ZONE_J_RGB_1) || (zone == MSI_ZONE_J_RGB_2) || (zone == MSI_ZONE_J_PIPE_1) || (zone == MSI_ZONE_J_PIPE_2)))
{
on_board_zone->effect = zone_data->effect;
on_board_zone->speedAndBrightnessFlags = zone_data->speedAndBrightnessFlags;
on_board_zone->colorFlags = zone_data->colorFlags;
on_board_zone->colorFlags |= SYNC_SETTING_ONBOARD;
on_board_zone->padding = 0x00;
on_board_zone->effect = zone_data->effect;
zone_data->speedAndBrightnessFlags = ((brightness << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT) & MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_MASK)
| ((speed << MSI_SPEED_BRIGHTNESS_FLAG_SPEED_SHIFT) & MSI_SPEED_BRIGHTNESS_FLAG_SPEED_MASK);
zone_data->colorFlags = (rainbow_color ? (zone_data->colorFlags & ~MSI_COLOR_FLAG_USE_CUSTOM_COLOR)
: (zone_data->colorFlags | MSI_COLOR_FLAG_USE_CUSTOM_COLOR));
on_board_zone->colorFlags |= MSI_COLOR_FLAG_SYNC_SETTING_ONBOARD;
on_board_zone->padding = 0x00;
}
/*-----------------------------------------------------*\
| For modes above MSI_MODE_LIGHTNING, set the onboard |
| zone to sync with JRGB, JPIPE1, and JPIPE2 |
\*-----------------------------------------------------*/
if(mode > MSI_MODE_LIGHTNING)
{
on_board_zone->speedAndBrightnessFlags |= SYNC_SETTING_JRGB;
on_board_zone->colorFlags |= (SYNC_SETTING_JPIPE1 | SYNC_SETTING_JPIPE2);
on_board_zone->speedAndBrightnessFlags |= MSI_SPEED_BRIGHTNESS_FLAG_SYNC_SETTING_JRGB;
on_board_zone->colorFlags |= (MSI_COLOR_FLAG_SYNC_SETTING_JPIPE1 | MSI_COLOR_FLAG_SYNC_SETTING_JPIPE2);
}
else
{
on_board_zone->speedAndBrightnessFlags &= ~SYNC_SETTING_JRGB;
on_board_zone->colorFlags &= ~(SYNC_SETTING_JPIPE1 | SYNC_SETTING_JPIPE2);
on_board_zone->speedAndBrightnessFlags &= ~MSI_SPEED_BRIGHTNESS_FLAG_SYNC_SETTING_JRGB;
on_board_zone->colorFlags &= ~(MSI_COLOR_FLAG_SYNC_SETTING_JPIPE1 | MSI_COLOR_FLAG_SYNC_SETTING_JPIPE2);
}
/*-----------------------------------------------------*\
| For modes at or below MSI_MODE_LIGHTNING, set all |
| onboard LED zones to match onboard LED zone 0 |
\*-----------------------------------------------------*/
if((zone == MSI_ZONE_ON_BOARD_LED_0) && (mode <= MSI_MODE_LIGHTNING))
{
for(int i = 0; i < numof_onboard_leds; ++i)
@@ -627,8 +683,10 @@ void MSIMotherboard185Controller::SetMode
if(zone_data != nullptr)
{
zone_data->effect = mode;
zone_data->speedAndBrightnessFlags = (brightness << 2) | (speed & 0x03);
zone_data->colorFlags = BITSET(zone_data->colorFlags, !rainbow_color, 7u);
zone_data->speedAndBrightnessFlags = ((brightness << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT) & MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_MASK)
| ((speed << MSI_SPEED_BRIGHTNESS_FLAG_SPEED_SHIFT) & MSI_SPEED_BRIGHTNESS_FLAG_SPEED_MASK);
zone_data->colorFlags = (rainbow_color ? (zone_data->colorFlags & ~MSI_COLOR_FLAG_USE_CUSTOM_COLOR)
: (zone_data->colorFlags | MSI_COLOR_FLAG_USE_CUSTOM_COLOR));
zone_data->padding = 0x00;
}
}
@@ -789,13 +847,23 @@ void MSIMotherboard185Controller::SetZoneColor
return;
}
/*-----------------------------------------------------*\
| Get the zone data pointer within the configuration |
| data buffer |
\*-----------------------------------------------------*/
ZoneData* zone_data = GetZoneData(data, zone);
/*-----------------------------------------------------*\
| Return if zone is invalid |
\*-----------------------------------------------------*/
if(zone_data == nullptr)
{
return;
}
/*-----------------------------------------------------*\
| Set the colors in the zone data |
\*-----------------------------------------------------*/
zone_data->color.R = red1;
zone_data->color.G = grn1;
zone_data->color.B = blu1;
@@ -803,6 +871,11 @@ void MSIMotherboard185Controller::SetZoneColor
zone_data->color2.G = grn2;
zone_data->color2.B = blu2;
/*-----------------------------------------------------*\
| If the zone is JRGB or JPIPE and the board has no |
| onboard LEDs, set the onboard zone's colors to this |
| zone's colors |
\*-----------------------------------------------------*/
if(no_onboards && ((zone == MSI_ZONE_J_RGB_1) || (zone == MSI_ZONE_J_RGB_2) || (zone == MSI_ZONE_J_PIPE_1) || (zone == MSI_ZONE_J_PIPE_2)))
{
ZoneData* on_board_zone = GetZoneData(data, MSI_ZONE_ON_BOARD_LED_0);
@@ -815,6 +888,10 @@ void MSIMotherboard185Controller::SetZoneColor
on_board_zone->color2.B = blu2;
}
/*-----------------------------------------------------*\
| Set all onboard LED zones' colors to match onboard |
| LED 0 |
\*-----------------------------------------------------*/
if(zone == MSI_ZONE_ON_BOARD_LED_0)
{
for(int i = 0; i < numof_onboard_leds; ++i)
@@ -843,6 +920,10 @@ void MSIMotherboard185Controller::SetLedColor
unsigned char blu
)
{
/*-----------------------------------------------------*\
| If this board supports Per-LED direct mode, update |
| the per-LED packet buffers |
\*-----------------------------------------------------*/
if(per_led_mode == DIRECT_MODE_PER_LED)
{
Color* zone_data = GetPerLedZoneData(zone);
@@ -878,6 +959,9 @@ void MSIMotherboard185Controller::SetLedColor
}
}
}
/*-----------------------------------------------------*\
| Otherwise, colors are set per zone. |
\*-----------------------------------------------------*/
else
{
if(((zone == MSI_ZONE_J_RAINBOW_1) || (zone == MSI_ZONE_J_RAINBOW_2) || (zone == MSI_ZONE_J_PIPE_1) || (zone == MSI_ZONE_J_PIPE_2)) && (index != 0))
@@ -1165,10 +1249,10 @@ void MSIMotherboard185Controller::GetMode
/*-----------------------------------------------------*\
| Update pointers with data |
\*-----------------------------------------------------*/
mode = (MSI_MODE)zone_data->effect;
speed = (MSI_SPEED)(zone_data->speedAndBrightnessFlags & 0x03);
brightness = (MSI_BRIGHTNESS)((zone_data->speedAndBrightnessFlags >> 2) & 0x1F);
rainbow_color = (zone_data->colorFlags & 0x80) == 0 ? true : false;
mode = (MSI_MODE) zone_data->effect;
speed = (MSI_SPEED) ((zone_data->speedAndBrightnessFlags >> MSI_SPEED_BRIGHTNESS_FLAG_SPEED_SHIFT) & MSI_SPEED_BRIGHTNESS_FLAG_SPEED_MASK);
brightness = (MSI_BRIGHTNESS)((zone_data->speedAndBrightnessFlags >> MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT) & MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_MASK);
rainbow_color = ((zone_data->colorFlags & MSI_COLOR_FLAG_USE_CUSTOM_COLOR) == 0 ? false : true);
color = ToRGBColor(zone_data->color.R, zone_data->color.G, zone_data->color.B);
}
Controllers/MSIMotherboardController/MSIMotherboardCommon.h
+16 -7
View File
@@ -122,13 +122,22 @@ enum MSI_BRIGHTNESS
#define NUMOF_PER_LED_MODE_LEDS 240
#define NUM_LEDS_761 720
#define SYNC_SETTING_ONBOARD 0x01
#define SYNC_SETTING_JRAINBOW1 0x02
#define SYNC_SETTING_JRAINBOW2 0x04
#define SYNC_SETTING_JCORSAIR 0x08
#define SYNC_SETTING_JPIPE1 0x10
#define SYNC_SETTING_JPIPE2 0x20
#define SYNC_SETTING_JRGB 0x80
/*---------------------------------------------------------*\
| Flag bitfield bit definitions |
| Note that the sync flags split across the two fields |
\*---------------------------------------------------------*/
#define MSI_SPEED_BRIGHTNESS_FLAG_SPEED_SHIFT 0
#define MSI_SPEED_BRIGHTNESS_FLAG_SPEED_MASK (0x03 << MSI_SPEED_BRIGHTNESS_FLAG_SPEED_SHIFT)
#define MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT 2
#define MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_MASK (0x1F << MSI_SPEED_BRIGHTNESS_FLAG_BRIGHTNESS_SHIFT)
#define MSI_SPEED_BRIGHTNESS_FLAG_SYNC_SETTING_JRGB (1 << 7)
#define MSI_COLOR_FLAG_SYNC_SETTING_ONBOARD (1 << 0)
#define MSI_COLOR_FLAG_SYNC_SETTING_JRAINBOW1 (1 << 1)
#define MSI_COLOR_FLAG_SYNC_SETTING_JRAINBOW2 (1 << 2)
#define MSI_COLOR_FLAG_SYNC_SETTING_JCORSAIR (1 << 3)
#define MSI_COLOR_FLAG_SYNC_SETTING_JPIPE1 (1 << 4)
#define MSI_COLOR_FLAG_SYNC_SETTING_JPIPE2 (1 << 5)
#define MSI_COLOR_FLAG_USE_CUSTOM_COLOR (1 << 7)
struct Color
{