mirror/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2026-08-01 19:08:59 -04:00
Code Issues Packages Projects Releases Wiki Activity
12,390 Commits 198 Branches 327 Tags
develop
Commit Graph

14 Commits

Author SHA1 Message Date
Thomas Göttgens
6367132919 Fix the NMEA checksum offset and harden the buffer writes around it (#11293) 
* Checksum NMEA sentences from the $ delimiter

The PositionLite printWPL() format begins with a CRLF, so the fixed start offset of 1 folded the newline and the $ into the checksum and every sentence went out with a wrong value. Locate the $ instead and stop at the terminator or a \*.

* Clamp truncated writes and harden the remaining fixed buffers

snprintf returns the length it would have written, so a truncated NMEA sentence
made buf + len point past the buffer and bufsz - len underflow into a huge size
for the checksum append. Clamp after each write.

Also pulls in the rest of #11236: the two remaining Dropzone sprintf calls, the
dead strcpy in mt_sprintf that wrote one byte past a zero-size allocation for an
empty format, and the 10-byte errcode buffer that INT32_MIN overflows.

Co-Authored-By: Andrew Yong <me@ndoo.sg>

* Bail out on a zero-sized buffer and cast err for %ld

snprintf writes nothing at all when bufsz is 0, not even a terminator, so the
checksum helper would run strchr over whatever the buffer already held. Return
before touching it.

int32_t is not long on every target, so cast before formatting with %ld.

Co-Authored-By: Andrew Yong <me@ndoo.sg>

* Add NMEA sentence regression tests

Covers checksum computation from the $ delimiter for both printWPL
overloads and printGGA, zero-sized buffers, and truncated buffers down
to one byte.

Co-Authored-By: Andrew Yong <me@ndoo.sg>

* Tighten checksum parsing and pin the WPL fixture checksum

Require exactly two hex digits followed by the sentence terminator, and
assert both WPL overloads against a known checksum instead of comparing
them to each other.

* Bump native suite count to 43

---------

Co-authored-by: Andrew Yong <me@ndoo.sg>
 2026-07-31 08:20:56 +00:00
Tom
21e3a583bd Yaml check for Meshtasticd (#11224) 
* feat(portduino): add `meshtasticd --check` config validator

Users hand-writing files in /etc/meshtasticd/config.d/ get no feedback when a
key is misplaced, misspelled or duplicated: meshtasticd silently ignores what
it does not read, so a broken config looks identical to a working one.

Add a --check mode that loads the configuration exactly as startup does, then
reports what it found and exits:

- Duplicate keys, via the yaml-cpp Parser/EventHandler stream. The Node API
  cannot see them because the map is already collapsed by the time it exists,
  and yaml-cpp keeps the FIRST occurrence, so a later override is discarded.
- Unknown or misnested keys, against a schema mirroring what loadConfig()
  reads, with a hint naming the section a stray key actually belongs to.
- rfswitch_table validation: unrecognised pins, mode rows whose length does not
  match the pin list, values that are not HIGH/LOW, and unknown modes.
- Cross-file overlap: every .yaml in the config directory merges into one
  portduino_config, so the file loaded LAST wins, the opposite of the
  within-file rule. Those files are read in filesystem order, not alphabetical.
- A warning when more than one file defines a Lora section: spidev, spiSpeed,
  gpiochip, DIO2_AS_RF_SWITCH, DIO3_TCXO_VOLTAGE and USB_PID/VID/Serialnum are
  assigned unconditionally with a default every time one is seen, so any of
  them not repeated in the last file loaded is silently reset.
- The resolved gpiochip/line for each pin, since a line that exists on the
  wrong chip is claimed successfully and then silently does nothing.

Exits non-zero when errors were found so it can also gate CI over
bin/config.d/**, keeping one implementation rather than a second schema.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

* fix(portduino): flag pins that resolve to -1 in --check

A pin key whose value will not convert to a number falls back to RADIOLIB_NC
(-1) while still being marked enabled, and initGPIOPin() then trips an
assertion inside LinuxGPIOPin rather than failing cleanly. YAML indentation
makes this easy to hit by accident: a stray line under "CS: 8" folds into the
value as a multi-line scalar, so the file parses, the daemon crashes with a
stack trace from a library file, and --check reported "Configuration looks
good" while printing "pin -1" two lines above.

Report it as an error naming the likely cause instead.

Also correct a comment claiming unparseable config.d files are skipped
silently. They are not: loadConfig() prints "*** Exception ..." with the line
and column. It is the discarded return value, not the diagnostic, that makes
the file's absence from the merged config easy to miss.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

* test(portduino): cover `meshtasticd --check` with fixtures and a fuzz suite

Adds the tests the config validator was missing, and the checks and fixes that
writing them turned up. The theme throughout is configuration that the YAML
parser accepts but that does not mean what it looks like it means.

Tests
-----

bin/test-config-check.sh - 57 assertions driving a built meshtasticd against
test/fixtures/portduino-config (50 fixtures plus two config.d trees). A shell
test rather than a Unity suite because both behaviours under test are properties
of the process: --check is judged by its exit status and printed report, and the
"a normal run rejects a bad config" path ends in exit() inside portduinoSetup(),
neither of which is reachable from a suite that links one translation unit.
Every fixture carries a comment header naming its planted fault and the expected
finding, so it can be read on its own. Coverage:

  * a clean config for each of the ten radio module families (RF95, sx1262,
    sx1268, LLCC68, sx1280, lr1110, lr1120, lr1121, sim, auto), asserted both
    findings-free and resolving to that module, so a silent fallback to sim
    cannot pass
  * LR11xx rfswitch tables: unrecognised pins, rows longer and shorter than the
    pin count, levels that are not exactly HIGH, a missing pins list, more than
    five pins, a scalar table, unknown MODE_ keys, a MODE_ row stranded one
    level out, and a legal partial table
  * the PA gain table in both accepted shapes, entries outside the uint16 range
    it is stored in, and more than the 22 points that are kept
  * values of the wrong type, split by consequence: the two settings read with
    no fallback stop meshtasticd starting, everything else is silently replaced
    by its default
  * out-of-range and unit mistakes: TCXO voltage written in millivolts, ports
    outside their usable range, an over-long StatusMessage
  * MAC sources: both keys set at once, a malformed address, an interface that
    does not exist
  * structural faults: duplicate keys, non-mapping and unknown sections, a key
    left at the top level, a sequence at the document root, an empty file,
    unreadable pins, unparseable YAML
  * cross-file behaviour over a config.d directory, including the switch tables
    that do not override each other
  * five configs run WITHOUT --check, each of which must still be refused, so
    check mode cannot quietly make the normal path permissive

test/test_fuzz_config - adversarial fuzzing of the checker itself, the "the tool
meant to diagnose your config crashes on it" failure mode. Scope is deliberately
narrow: yaml-cpp does the parsing and is fuzzed upstream, so what is exercised
here is our code above the parse, above all the duplicate-key detector, which is
the one hand-rolled piece and walks the raw parser event stream with its own
stack. Groups: the checked-in fixtures as a seed corpus, 3000 byte mutations of
them (flips, truncation, insertion, splicing, deletion), and structural torture
(nesting to 4096 in flow and block style, duplicate keys at depth, anchors,
aliases and merge keys, 64KB keys, 256KB scalars, multi-document files). A
fourth group of random bytes is present but disabled behind
FUZZ_CONFIG_RANDOM_BYTES: it was half the runtime for the least return, since
uniform noise is rejected on the first token. The contract is crash-freedom and
termination under AddressSanitizer, not any particular finding.

CI runs the shell test in the existing native simulator job; the fuzz suite is
picked up by the existing ^test_fuzz_ area rule. native-suite-count 40 -> 41.
The fixtures are exempt from trunk in .trunk/trunk.yaml, since prettier rejects
the duplicate keys and bad indentation that are the point of them.

Checker fixes found while writing the tests
-------------------------------------------

--check reported a clean exit 0 on configs meshtasticd then refuses to boot, the
worst failure a diagnostic tool can have. Four hard exits inside loadConfig()
killed the report before it printed: an unparseable file, an unknown Lora.Module,
MACAddress and MACAddressSource both set, and HUB75 on a build without it. All
are now reported as findings, and all are still refused on a normal run.

New validation: Lora.Module against the accepted spellings, which are matched
exactly and inconsistently cased, with a suggestion when only case differs; a
per-key value type table covering ~85 keys, tested by asking yaml-cpp to perform
the same conversion loadConfig() will so it cannot drift; the PA gain table;
DIO3_TCXO_VOLTAGE, which is in volts and multiplied by 1000, so the millivolt
value everything else uses silently asks for 1800V; APIPort and Webserver.Port
ranges; MaxNodes; StatusMessage truncation; MAC address and source; and an
unreadable ConfigDirectory.

Also fixes a crash: a ConfigDirectory that cannot be read threw an uncaught
filesystem_error from directory_iterator and aborted meshtasticd with SIGABRT,
taking --check down with it. It now fails cleanly.

Two smaller ones: cppcheck's uselessCallsSubstr on the ancestor walk, which was
failing every check job; and the duplicate-key detector's stack pop, which was
unguarded and relied on yaml-cpp emitting balanced events.

Switch tables are the one place "the file loaded last wins" is false. The loader
only ever writes HIGH and never writes LOW back, so a HIGH from an earlier file
survives a later file that clears it and the radio drives the OR of every table
loaded. Confirmed with --output-yaml. Reported as an error for now; the loader
itself is left alone, as that changes RF behaviour.

* fix(portduino): report CH341 pins as adapter indexes, not gpiochip lines

--check printed "Resolved GPIO lines (what meshtasticd will try to claim)" for
every config, listing a gpiochip and line for each Lora pin and advising they be
confirmed against gpiodetect and gpioinfo. For spidev: ch341 every part of that
is false. portduinoSetup() skips initGPIOPin() for every Lora pin when spidev is
ch341 and hands the raw numbers to Ch341Hal, so nothing is claimed from a
gpiochip -- and on Windows and macOS, where a USB adapter is the only way to
attach a radio, there is no gpiochip, gpiodetect or gpioinfo to check against in
the first place. The checker had no ch341 coverage at all: not one fixture used
it, so the whole USB-SPI path went unexercised.

The summary now splits on the transport. A ch341 device gets its pins listed as
adapter indexes with the gpiod advice dropped, and a gpiochip or line mapping
written alongside it is reported: those are read, stored, and never used.

Also: "RF switch table: not set" read as a gap on an SX126x, where there is
nothing to set. setRfSwitchTable() is only ever called for an LR11xx, so absence
is now "not needed for this module" everywhere else, and "not resolved yet" for
auto, which has no module to judge against.

Fixtures: usb-ch341.yaml (clean, the meshstick shape) and ch341-gpiochip.yaml.

CI fix
------

test-native was RED on "config.d overrides are reported", which wanted 2
warnings and got 1. The fixture's two config.d files name different modules, so
which one wins -- and whether the LR11xx-without-a-switch-table warning fires --
depends on the order the filesystem returns them in. That is the very thing the
fixture exists to demonstrate, so the count is no longer asserted; the report's
own order caveat is asserted instead.

Review fixes
------------

The unreadable-ConfigDirectory diagnostic was the one new print in
PortduinoGlue.cpp not gated behind !configCheck, so it landed ahead of the report
header and broke the clean output the rest of the change is careful to keep.

Docs: rfswitch-valid.yaml carries seven modes, not eight, and empty-file.yaml is
comments-only rather than zero bytes.

* style(portduino): trim --check comment blocks and reconcile suite count

Condense the multi-paragraph comment blocks in the --check validator to the
one-to-two-line convention, and bump test/native-suite-count to 42 for the
test_fuzz_config suite added here.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
 2026-07-30 11:06:24 +00:00
Benjamin Faershtein
45cb8e7500 feat: preserve normal radio profiles across event firmware (#11110) 
* feat: isolate event radio profiles

* fix: preserve identity on degraded config boot

* fix: guard event profile storage

* style: align event profile storage names

* fix: discard event profile on normal boot

* refactor: simplify event profile cleanup

* fix: limit inactive profile migration to event firmware

* fix(event): make event-profile capacity check portable across filesystems

The USERPREFS_EVENT_MODE storage preflight called FSCom.totalBytes() and
FSCom.usedBytes(), which only exist on ESP32's LittleFS wrapper. Every other
backend failed to compile once event mode was enabled:

  error: 'class InternalFileSystem' has no member named 'totalBytes'   (nRF52)
  error: no member named 'totalBytes' in 'fs::FS'                      (Portduino)

This was not caught earlier because the event block is behind
#if USERPREFS_EVENT_MODE, and the existing unit tests only cover the pure
helpers, which compile identically either way.

Add fsTotalBytes()/fsUsedBytes() to FSCommon and implement them per backend:
littlefs v1 traversal for nRF52 (Adafruit_LittleFS) and STM32
(STM32_LittleFS), FSInfo for RP2040, statvfs for Portduino, and the native
methods for ESP32 and nRF54L15. The nRF52/STM32 path reports "full" if the
traversal errors so the capacity check fails safe.

Verified with USERPREFS_EVENT_MODE=1: native-macos test_event_profile_storage
passes 5/5, and heltec-v3, rak4631, rak11310 and rak3172 all build clean.

* fix(event): use std::filesystem for Portduino capacity, bump native-suite-count

Two CI fixes:

- native-windows has no <sys/statvfs.h>, so the Portduino branch of
  fsTotalBytes()/fsUsedBytes() broke the Windows build. Switch to
  std::filesystem::space(), which is already used under ARCH_PORTDUINO in
  HostMetrics.cpp and works on both POSIX and MinGW. Errors report "full"
  so the capacity check still fails safe.

- This PR adds test/test_event_profile_storage, taking test/ from 40 to 41
  suite directories, which trips the native-suite-count reconciliation check.

* fix(event): scope boot-write deferral to the radio profile, address review

Review feedback:

- Copilot: saveProto()'s boot-write deferral applied to every file, so
  loadFromDisk()'s recovery writes (e.g. restoring owner fields into
  devicestate) were silently dropped and never retried, because the ctor CRC
  baselines are computed after loadFromDisk(). Deferral now applies only to
  the radio-profile files, via isRadioProfileFile().

- jp-bennett: eventConfigFromStandard() wrapped a struct copy plus one field
  assignment in a header helper with its own unit test. Inlined at its single
  call site and removed; the behaviour is covered end-to-end by hardware
  validation instead (RAK4631 normal -> event -> normal preserves NodeNum and
  public key while swapping LoRa, and restores the original channel
  byte-identically).

- jp-bennett: the active-backup encrypted-storage migration ran for normal
  builds too, which changed non-event behaviour and contradicted the PR's
  stated event-only scope. Scoped to USERPREFS_EVENT_MODE; the adjacent block
  already covers the inactive standard backup in event builds.

New tests (all verified to fail under mutation, not vacuous):

- test_event_paths_never_collide_with_standard_or_shared_files: the core
  safety property. A path-table slip would make event firmware overwrite the
  user's real config, channels or backup, or capture a shared file like
  devicestate/nodedb. Nothing asserted this before.

- test_only_radio_profile_files_defer_boot_writes: guards the deferral fix
  above so re-widening it fails loudly.

- test_event_reservation_fits_smallest_supported_filesystem: the reservation
  is compile-time but must fit filesystems as small as 14 KiB (STM32WL) and
  28 KiB (nRF52840). Protobuf growth pushing it past those would silently
  stop event profiles persisting - the exact failure mode confirmed by
  fault injection on a RAK4631.

Verified with USERPREFS_EVENT_MODE both on and off: 7/7 tests pass, and
rak4631, heltec-v3, rak11310 and rak3172 all build clean.

* fix: preserve event profile storage recovery

---------

Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Benjamin Faershtein <benjaminfaershtein@Benjamins-MacBook-Pro-2.local>
 2026-07-26 22:58:23 +00:00
James Rich
8e104a909b fix(admin): persist TAK module config (team color / member role) (#11216) 
Setting TAK team/role ACKed and rebooted but stored nothing:
handleSetModuleConfig had no tak case, saveToDisk never set has_tak,
and handleGetModuleConfig had no TAK_CONFIG case. Add all three, plus
a native suite sweeping every ModuleConfig submessage through
set -> save -> load -> get and a TAK value-fidelity suite.

Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
 2026-07-25 23:03:06 +00:00
Tom
1872e5b306 TMM extend to ephemeral 3rd tier store (#11050) 
* Harden TMM NodeInfo direct-response: staleness, key hygiene, throttle

The NodeInfo direct-response path answered queries on behalf of other nodes
from an unauthenticated, never-expiring cache while suppressing the genuine
request (STOP). That let a long-gone or forged identity be served as a
fresh-looking, authoritative reply indefinitely. Three fixes:

- Staleness gate: refuse to spoof a reply for a node not actually heard within
  ~6h (PSRAM cache via lastObservedMs; NodeDB fallback via sinceLastSeen, which
  tolerates last_heard==0 when the clock is unset). A stale entry now falls
  through so the real request propagates instead of being answered for a dead
  node.

- Key hygiene: mirror NodeDB::updateUser() PKI checks when caching overheard
  NodeInfo - reject a packet advertising our own public key, and pin keys (drop
  a NodeInfo whose key mismatches an already-known key from NodeDB or from our
  own cache). Prevents cache poisoning / key substitution via the spoofed-reply
  path.

- Response throttle: at most one spoofed reply per target node per 30s. Direct
  responses bypass the per-sender rate limiter (they STOP the request first) and
  the reply target is attacker-controlled, so this bounds airtime exhaustion and
  reflected floods. Recorded in a new NodeInfoPayloadEntry.lastResponseMs
  (PSRAM; self-expiring timestamp compare, no sweep needed).

Tests: native NodeDB-fallback staleness (stale drops, fresh serves) plus
PSRAM-guarded staleness, throttle, and key-mismatch cases.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G7QggdwMM1CJkguuCmMfZs

* Add TODO(T1-T9) markers for code-review findings on NodeInfo hardening

Comment-only. Tags each site flagged in the review of the direct-response
throttle/staleness/key-hygiene change so the follow-ups are visible in-context:

T1 throttle black-holes distinct requestors; T2 per-target key doesn't bound
aggregate TX; T3 non-PSRAM fallback unthrottled; T4 millis-wrap defeats the
staleness gate; T5 redundant second O(n) scan for the throttle stamp;
T6 duplicated 32-byte key compares; T7 sinceLastSeen() called twice;
T8 two 6h constants can desync; T9 clockMs()==0 collides with the 0 sentinel.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G7QggdwMM1CJkguuCmMfZs

* Address code-review cleanups T6, T7, T8 in NodeInfo direct-response

T8: derive kNodeInfoMaxServeAgeSecs from kNodeInfoMaxServeAgeMs so the PSRAM
    and NodeDB-fallback staleness windows cannot desync.
T6: collapse the three duplicated 32-byte key compares in cacheNodeInfoPacket
    (owner-impersonation + NodeDB pin + cache TOFU pin) into one pubKeysEqual()
    helper, so the compare lives in one place.
T7: compute sinceLastSeen(node) once on the fallback staleness path so the
    tested age and the logged age cannot diverge (it calls getTime() each time).

Remaining review items still marked in-code: T1/T2/T3 (throttle design),
T4/T9 (millis-wrap + 0-sentinel), T5 (redundant throttle-stamp scan).

Native test_traffic_management suite: 48/48 passing.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G7QggdwMM1CJkguuCmMfZs

* Throttle the NodeDB fallback direct-response path (T3)

The per-target NodeInfo response throttle lived only in the PSRAM
NodeInfoPayloadEntry, so non-PSRAM boards - which answer from the NodeDB
fallback path - emitted spoofed direct replies with no rate limit at all,
leaving the airtime/reflection surface the throttle exists to close.

Add a single module-global fallback stamp (nodeInfoFallbackLastResponseMs,
4 bytes, guarded by cacheLock) that throttles the fallback path to one
spoofed reply per window across all targets. Coarser than the PSRAM
per-target throttle, but the fallback path has no per-node slot to stamp,
and a global cap still bounds spoofed transmissions - which is the point.

Add a native test exercising the fallback throttle window.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G7QggdwMM1CJkguuCmMfZs

* Make NodeInfo staleness/throttle wrap- and sentinel-safe (T4, T9)

T9: the millis-based fields that use 0 as a "never" sentinel
(lastObservedMs, lastResponseMs, nodeInfoFallbackLastResponseMs) could be
stamped with a literal 0 during the one-millisecond clockMs()==0 instant at
each ~49.7-day wrap, momentarily colliding with the sentinel and disabling
the staleness/throttle gate for that entry. Route all such stamps through a
new nowStampMs() that maps 0 -> 1; the 1 ms skew is irrelevant to every
window these fields feed.

T4: the staleness gate's modular age compare is only unambiguous while true
age < 2^32 ms (~49.7 days); an entry that lingered unrefreshed that long
could wrap to a small age and read as fresh, defeating the gate. Add a
NodeInfo eviction pass to the maintenance sweep that drops entries past the
serve window, so an entry is removed long before its age can approach the
wrap boundary. This also frees slots holding stale identities.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G7QggdwMM1CJkguuCmMfZs

* Stamp PSRAM throttle entry by captured index, not a rescan (T5)

The post-send throttle stamp did a second full O(n) scan of the PSRAM
NodeInfo array under a fresh lock, even though findNodeInfoEntry() had
already located the slot at the top of shouldRespondToNodeInfo(). Capture
the slot index during that initial lookup and address the entry directly on
the stamp path. Because the cache lock is released between the two accesses,
the slot could have been evicted or reused, so re-validate node == p->to
under the lock before stamping.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G7QggdwMM1CJkguuCmMfZs

* Document accepted per-target throttle tradeoffs (T1, T2)

Convert the T1/T2 TODO markers into a NOTE: the per-target PSRAM throttle
keying and its lack of an aggregate bound are deliberate design choices, not
pending work. A distinct requestor being throttled for one window is
harmless on a redundant mesh, and keeping the PSRAM path per-target
preserves throughput for legitimate multi-target responders (the fallback
path already bounds aggregate via its global stamp).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G7QggdwMM1CJkguuCmMfZs

* Track signed-provenance of cached NodeInfo public keys

Add keySignerProven to NodeInfoPayloadEntry, set when an observed NODEINFO
frame's XEdDSA signature was verified (mp.xeddsa_signed). This distinguishes
a trust-on-first-use key from one proven to belong to a signer. The flag is
monotonic - once proven it stays proven, and the existing key-pin checks
forbid the underlying key from changing - so a later unsigned frame cannot
downgrade it. A signature can only be verified against a key we already
held, so a first-contact key is always TOFU until a later signed frame
upgrades it.

Groundwork for using the TMM cache as a last-resort public-key source, where
this flag serves as a trust tier.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G7QggdwMM1CJkguuCmMfZs

* Draw public keys from the TMM NodeInfo cache as a last resort

Add TrafficManagementModule::copyPublicKey() and consult it from
NodeDB::copyPublicKey() after the hot (NodeInfoLite) and warm
(WarmNodeStore) tiers miss. This extends the pool of peers the node can
encrypt to: a key the NodeInfo direct-response cache overheard for a node
that has since aged out of both NodeDB tiers can still be used.

The getter reports whether the key is signer-proven or trust-on-first-use.
NodeDB serves TOFU keys here too - the same first-contact trust NodeDB
already applies in updateUser() - so the pool actually expands to new
long-tail nodes rather than only re-confirming known keys.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G7QggdwMM1CJkguuCmMfZs

* Retain keyed NodeInfo entries as a pubkey pool; trust-tier eviction

Now that NodeDB::copyPublicKey() draws keys from the NodeInfo cache, the flat
6 h serve-window eviction would discard useful keys the moment a node stops
being servable. Split retention: an entry carrying a 32-byte public key is
kept for kNodeInfoKeyRetentionMs (7 d), while a keyless entry still expires
at the serve window. Both windows stay well under the ~49.7-day millis wrap,
preserving the T4 wrap-safety guarantee.

Make LRU victim selection trust-tiered to match: a keyless slot is sacrificed
before any keyed one, and a trust-on-first-use key before a signer-proven
key; within a tier the oldest loses. Mirrors WarmNodeStore's keyed-first
admission so the most valuable keys are the stickiest under memory pressure.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G7QggdwMM1CJkguuCmMfZs

* Test signed-provenance flag and copyPublicKey key-pool source

PSRAM-gated tests (run on the ESP32 build, alongside the existing NodeInfo
PSRAM tests):
- copyPublicKey serves a TOFU key learned from an unsigned NodeInfo and
  reports signerProven=false
- a later signature-verified NodeInfo upgrades provenance to signer-proven
  while the pinned key bytes stay unchanged
- copyPublicKey reports a miss for an uncached node

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G7QggdwMM1CJkguuCmMfZs

* Inherit signer provenance from NodeDB when caching a re-found node

When the TrafficManagement NodeInfo cache re-caches a node, mark its key
signer-proven if NodeDB already knows the node as a verified signer for that
same key - even if this particular (unicast/unsigned) frame carried no
signature. Previously the flag only upgraded on a frame we verified
ourselves, so a node we had already proven elsewhere looked TOFU here.

Add NodeDB::isVerifiedSignerForKey(), which checks both tiers - the hot
store's signed bitfield and the warm tier's cached signer bit - and requires
the key to match so a rotated/mismatched key never inherits a stale verdict.
Add WarmNodeStore::isVerifiedSigner() to expose the warm signer bit (the
rebase onto develop added the bit itself; this surfaces it for lookups).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G7QggdwMM1CJkguuCmMfZs

* Lock NodeInfoPayloadEntry packing with a size assert

keySignerProven cost zero bytes: sourceChannel, the two bools, and
decodedBitfield are four 1-byte fields that fill a single 4-byte tail word
(struct alignment is 4), so the flag consumed former padding rather than
growing the 2000-entry PSRAM array. Add a static_assert pinning the entry to
sizeof(meshtastic_User) + 20 so a future 5th trailing byte - which would open
a fresh word (~8 KB PSRAM across the array) - fails the build instead of
silently costing memory, prompting new flags to be packed into existing bytes.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G7QggdwMM1CJkguuCmMfZs

* Pack NodeInfo cache booleans into 1-bit fields

Fold hasDecodedBitfield and keySignerProven into adjacent uint8_t:1 bitfields
so they share a single byte, reserving 6 spare bits for future flags without
growing the 2000-entry PSRAM array. sizeof is unchanged (still one packed tail
word, sizeof(meshtastic_User) + 20); access is by name exactly as before, so no
call sites change. Reorders decodedBitfield ahead of the flags so the two
1-bit members stay adjacent and the compiler packs them together.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G7QggdwMM1CJkguuCmMfZs

* Gate NodeInfo replay on signer-proven provenance (compile-time, default on)

Add TMM_NODEINFO_REPLAY_REQUIRE_SIGNED (default 1): the direct-response path
now only spoofs a reply for a node whose key is signer-proven, in addition to
the staleness gate - so replay is based on flagging AND staleness. Replay is a
courtesy feature, and vouching for an unverified (trust-on-first-use) identity
to other nodes is the risk this closes, so signed-only is the safer default.
Define the macro to 0 at build time to also serve fresh TOFU-only nodes.

Both paths are gated: the PSRAM path checks the cached keySignerProven flag,
the NodeDB fallback checks nodeInfoLiteHasXeddsaSigned(node). The effective
gate (TMM_NODEINFO_REPLAY_SIGNED_GATE) is bypassed when PKI is excluded from
the build, since nothing can be signed there and the courtesy feature would
otherwise be disabled outright.

Tests: existing reply-expecting tests establish signer-proven state (a new
markKeySignerProvenForTest hook for the PSRAM cache, the NodeDB signed bit for
the fallback path); add fallback and PSRAM tests asserting an unsigned/TOFU
node is withheld under the default gate.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G7QggdwMM1CJkguuCmMfZs

* Rehydrate re-admitted node names from the TMM NodeInfo cache

The warm tier keeps an evicted node's key but not its name (the 40-byte
record has no room), so a re-admitted long-tail node is nameless until its
next NodeInfo broadcast. The TrafficManagement NodeInfo cache is much larger
(2000 PSRAM entries) and commonly still holds the full User, so use it as a
name reservoir the warm tier structurally cannot be.

On re-admission (getOrCreateMeshNode), after the warm-tier restore, copy the
cached identity from the TMM cache via a new copyUser() getter - but only when
its cached key matches the key just restored from warm, so a name never
attaches to a different identity than the one we encrypt to (key-matched
trust). Guarded by HAS_TRAFFIC_MANAGEMENT and a null check; a no-op without
the PSRAM cache or when no key is present. CopyUserToNodeInfoLite sets only
user-related bits, so the warm-restored signer bit is preserved.

Limitations (by design): PSRAM-only, and the TMM cache is RAM-only, so this
helps within an uptime session, not across reboot.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G7QggdwMM1CJkguuCmMfZs

* Drop non-portable NodeInfoPayloadEntry size assert (fixes pico build)

The static_assert pinned sizeof(NodeInfoPayloadEntry) to
sizeof(meshtastic_User) + 20, but nanopb packs the generated User struct
differently per platform: on pico its size is not a multiple of 4, so
alignment padding before the uint32 timestamps makes the overhead 22, not
20, and the assert failed the build (native happened to be +20 and passed,
hiding it). The bitfield packing it was guarding still stands; replace the
fixed-count assert with a comment, since no portable byte count exists.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G7QggdwMM1CJkguuCmMfZs

* Run the NodeInfo cache paths in native tests (TMM_HAS_NODEINFO_CACHE)

The NodeInfo direct-response cache and everything layered on it - key
pinning, signer provenance, staleness, throttle - was compiled only for
ARCH_ESP32 + BOARD_HAS_PSRAM, so its entire test set was skipped by the
native CI suite and ran nowhere but real hardware.

Fold the scattered platform guards into one TMM_HAS_NODEINFO_CACHE macro
that also enables the cache (plain heap, delete[] path already existed)
for ARCH_PORTDUINO unit-test builds. Production portduino and embedded
test builds are unchanged. Tests that exercise the NodeDB fallback path
drop the cache explicitly via a new dropNodeInfoCacheForTest() hook, so
both response paths are covered in one binary.

Native suite: 60/60 (was 50 with the 10 cache tests compiled out).

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KWHDDxY4U2XLYW2WJJ2oLT
(cherry picked from commit b2dafbbbd6501b42fc27175e599fb38be292b0e3)

* Pin NodeInfo cache keys against the warm tier, not just the hot store

cacheNodeInfoPacket() mirrored NodeDB::updateUser()'s key pin but checked
only getMeshNode() - the hot store. updateUser's own pin effectively
covers the warm tier too (getOrCreateMeshNode rehydrates the warm key
before the check), so the mirror had a gap: for a node evicted to the
warm tier whose cache slot was also gone, an attacker's NodeInfo with a
bogus key passed the pin, and the cache's TOFU pin then locked the
genuine node's frames out until the poisoned entry aged away.

Split the authoritative lookup out of NodeDB::copyPublicKey() as
copyPublicKeyAuthoritative() (hot store, then warm tier - never the
opportunistic TMM tier, which would compare the cache against itself)
and pin against that.

Test: warm-tier-only key rejects a mismatching NodeInfo and accepts the
matching one. Native suite: 61/61.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KWHDDxY4U2XLYW2WJJ2oLT
(cherry picked from commit 28e880875ef1f8bf16bdf301a4e6036537a84b4b)

* Convert NodeInfo cache clocks to uint8 tick counters

Replace the entry's uint32 millis stamps (lastObservedMs,
lastResponseMs) with three uint8 free-running tick clocks - the same
modular scheme the UnifiedCache counters already use:

  obsTick   3 min/tick (12.8 h period) - replay staleness gate
  respTick  5 s/tick   (21.3 min)      - per-target response throttle
  retTick   1 h/tick   (10.67 d)       - retention TTL + LRU age

Validity is an explicit flag bit (hasObserved / hasResponded), not a 0
sentinel, and the maintenance sweep saturates a stamp (clears its flag)
once its window passes, so no stamp can age toward its ~256-tick
aliasing horizon. That retires the wrap/sentinel special cases (T4, T9)
- nowStampMs() survives only for the fallback path's module-global
millis stamp. obsTick is separated from retention by design: only a
genuinely heard NODEINFO frame stamps it, so later membership-based
retention refresh can never make a silent node look servable.

Also drops lastObservedRxTime, which was only echoed in a debug log.

Entry shrinks 136 -> 128 B; the 2000-entry array 272 kB -> 256 kB, 8 kB
below the original develop footprint while keeping the throttle and
retention features. Tick granularity costs at most one tick per window
(+-5 s on 30 s, +-3 min on 6 h, +-1 h on 7 d).

Native suite: 61/61.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KWHDDxY4U2XLYW2WJJ2oLT
(cherry picked from commit e48ed9cfacfed0131b77ed2f1992e8720720d387)

* Keep the NodeInfo cache a superset of NodeDB (seed + keep-alive)

The cache learned identities only from overheard NODEINFO frames, so its
membership was opportunistic: a NodeDB-tier node whose frame was never
heard this boot had no entry (no key pin to protect it, no name to
rehydrate), and the retention TTL evicted entries for nodes that still
lived in the hot store or warm tier.

Add an anti-entropy pass to the maintenance sweep
(reconcileNodeInfoMembershipLocked): every hot-store / warm-tier node
gets an entry - full identity from the hot store (hasFullUser), key-only
from the warm tier - with signer provenance inherited key-matched, and
NodeDB's key adopted wholesale on conflict. Member entries (isMember)
are re-stamped each sweep, so they never age toward the retention TTL;
when a node leaves both tiers the keep-alive stops and its entry ages
out from its final member re-stamp. Membership also outranks key trust
in LRU victim selection, and the reconcile pass skips seeding rather
than churn one member out for another when hot+warm exceeds the cache.

Two properties are load-bearing:
 - seeding/keep-alive never touch obsTick/hasObserved, so a seeded or
   retained entry is never served as a spoofed reply - only genuinely
   heard frames make a node servable;
 - copyUser() now requires hasFullUser, so a key-only warm seed can
   never stamp HAS_USER onto a nameless node via name-rehydration.

Native suite: 64/64.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KWHDDxY4U2XLYW2WJJ2oLT
(cherry picked from commit 4f1b30d838b2f7b11173373b8f1ba97cf91bef6b)

* Write-through NodeDB identity commits into the NodeInfo cache

updateUser() is the single chokepoint through which every remote
identity/key write enters NodeDB (key-verification keys stay in
CryptoEngine's pending buffer until a NodeInfo carries them here), so
one hook at its tail lets the NodeInfo cache reflect a commit
immediately instead of waiting up to a minute for the reconcile sweep -
which stays in place as the anti-entropy backstop.

onNodeIdentityCommitted() upserts the full User: NodeDB's key is
authoritative (a conflicting cached key is stale residue - replaced,
provenance dropped), a keyless commit keeps an already-cached TOFU key,
and signer provenance transfers only for the committed key. The
observation stamp is never touched: knowledge is not observation, so a
hook write can never make a never-heard node servable - covered by the
new test alongside immediate copyUser/copyPublicKey visibility.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KWHDDxY4U2XLYW2WJJ2oLT
(cherry picked from commit e160b899728be8d951d4e7bdf5106c777832b917)

* Purge TrafficManagement caches on explicit node removal

NodeDB::removeNodeByNum() already forgets the node everywhere NodeDB
owns - hot store, satellite stores, warm tier - but the TrafficManagement
caches kept the deleted identity: the NodeInfo entry went on feeding the
key pool (NodeDB::copyPublicKey) and name rehydration, and the unified
slot kept its role/next-hop/dedup state, resurrecting the node on next
contact.

Add purgeNode(): clears both the unified cache slot and the NodeInfo
cache entry, called from removeNodeByNum() alongside the warm-tier
removal. Removal means full removal; passive eviction never calls this,
and the reconcile sweep will not re-seed a node absent from both NodeDB
tiers.

Test: an observed identity plus a next-hop hint both vanish after
removeNodeByNum(). Left for CI to execute per request.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KWHDDxY4U2XLYW2WJJ2oLT
(cherry picked from commit b5564c173337de99e15ef998a5c698550238fd3c)

* Document the tmm-fix-2 / tmm-fix-superset reconciliation decisions

Two parallel implementations of the same superset design are being
combined on this branch. This decision matrix records every divergence
and which side each reconciled feature takes, ahead of the code commits
that apply them.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KWHDDxY4U2XLYW2WJJ2oLT

* Reconcile retention: no timed eviction, obsTick LRU, hourly seeding

Adopt tmm-fix-superset's retention model (reconciliation decisions #3,
#4, #9 in .notes/tmm-super-superset-reconciliation.md):

- Entries are never evicted on a timer. The 7-day retention TTL and its
  third tick clock (retTick) are gone; wrap-safety rests entirely on the
  sweep's presence-bit saturation, and a quiet entry keeps its value
  (pubkey pool, name rehydration). Slots are reclaimed only by
  trust/membership-tiered LRU on insert - age scored by obsTick, with
  never-observed entries counting oldest - or by an explicit purge.
- Membership refresh (entry -> NodeDB contains checks) runs every sweep;
  the heavy seeding pass runs at boot and then hourly, with the
  write-through hooks carrying immediacy in between.
- Tick constants and helpers move into the header beside the existing
  UnifiedCache tick idiom, with static_asserts tying the tick windows to
  the fallback path's seconds/ms forms.

Kept from tmm-fix-2 (decision #4): the warm tier is still seeded
(key-only records via WarmNodeStore::entryAt) so the invariant remains
cache superset-of hot AND warm, and the spareMembers guard still stops
seeding from churning one member out for another when hot+warm exceeds
the cache. Entry shrinks to 128 B (2000 entries = 256 kB).

The TTL-based retention test is superseded by a no-timed-eviction test:
a quiet keyed entry survives 9 days of sweeps while the serve gate
saturates as before.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KWHDDxY4U2XLYW2WJJ2oLT

* Reconcile hooks: key-commit write-through, purgeAll, key-matched signer

Adopt tmm-fix-superset's hook coverage (reconciliation decisions #5-#8):

- onNodeKeyCommitted(): write-through for the two key-write sites that
  bypass NodeDB::updateUser - the Router's admin-key learn (TOFU-grade)
  and KeyVerificationModule's manual-verification commit (proven=true,
  the strongest provenance the cache can carry). Both were coverage gaps
  in the tmm-fix-2 write-through design.
- updateUser's hook call now transfers signer status key-matched
  (isVerifiedSignerForKey) instead of the node's bare signed flag, and
  runs on acceptance rather than only on change.
- purgeAll(): factoryReset() and resetNodes() clear both TMM tables -
  removal-is-full-removal applies to bulk resets too, without relying on
  the usual post-reset reboot.
- purgeNode() reuses the existing finders instead of open-coded scans
  and logs the (user-initiated) purge.
- peekNodeInfoFlagsForTest(): flag introspection so saturation and
  membership tests can assert sweep effects directly.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KWHDDxY4U2XLYW2WJJ2oLT

* Merge the two branches' test suites for the reconciled design

Port tmm-fix-superset's unique tests, adapted to run natively under
TMM_HAS_NODEINFO_CACHE (reconciliation decision #11):

- keyHook_upsertsAndGovernsProvenance: TOFU learn -> manual-verification
  upgrade -> NodeDB-senior rotation resets provenance.
- tickSaturation_sweepClearsObserved: the sweep saturates hasObserved
  past the serve window, the entry persists (no TTL), and a full
  256-tick clock wrap cannot alias a saturated stamp back to fresh.
- sweepMembershipMarking: reconciliation seeds a hot identity as
  member+fullUser+unobserved; the next sweep clears membership once the
  node leaves NodeDB, while the entry itself persists.

tmm-fix-2's tests (warm pin, hot/warm seeding, updateUser write-through,
removal purge - now also asserting the entry is gone via the new peek
hook - and the no-timed-eviction rewrite) were already on this branch.
Suite now counts 70 test functions.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KWHDDxY4U2XLYW2WJJ2oLT

* Adapt cherry-picked and seeding tests to the reconciled semantics

Two tests needed updating for interactions the validation run surfaced:

- The #11035 test (ignoresUnsignedSignerIdentity) was written for a
  world without the native NodeInfo cache: it needs the NodeDB fallback
  path (dropNodeInfoCacheForTest) and the signed replay gate satisfied
  for its target, like the other fallback tests on this branch.
- The hot-seed test's "observed frame makes it servable" step now sends
  a signature-verified frame: its node is a known signer, and per #11035
  an unsigned frame from a signer must not (and does not) drive cache
  writes - the gate working as designed.

Full native suite: 70/70 under ASan.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KWHDDxY4U2XLYW2WJJ2oLT

* trunk fml

* Doc tidyup

* TrafficManagement: key NodeInfo-cache maintenance to its own guard

runOnce() nested the entire NodeInfo maintenance block (tick-stamp
saturation, membership refresh, boot/hourly reconcile) inside
#if TRAFFIC_MANAGEMENT_CACHE_SIZE > 0, so a variant overriding the
unified cache to 0 on a PSRAM board would compile the NodeInfo cache
without its maintenance: hasObserved would never saturate, obsTick
would alias past its 12.8 h wrap, and the 6 h staleness gate - whose
wrap-safety explicitly depends on the sweep - would serve spoofed
replies for long-gone nodes. Extract maintainNodeInfoCacheLocked(),
guarded by TMM_HAS_NODEINFO_CACHE alone, and give runOnce() the same
independent-guard structure purgeAll() already has.

Also close the runtime cousin of the same mismatch: the write-through
hooks (onNodeIdentityCommitted / onNodeKeyCommitted) now no-op while
moduleConfig.has_traffic_management is off. Previously they kept
filling the cache from NodeDB commits while runOnce() returned
INT32_MAX, accumulating entries that were never swept or reconciled.
Purges and reads stay ungated: removal must always work, and reads
just miss an empty cache.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

* TrafficManagement: forward throttled NodeInfo requests instead of consuming them

The direct-response throttle returned true, which made handleReceived()
STOP the request: within the 30 s window a repeat request was neither
answered nor forwarded toward the genuine target, and the call site
still logged "respond" and bumped nodeinfo_cache_hits for a reply that
was never sent. A requester whose first reply was lost on a noisy link
got silence for the whole window.

Return false instead: the request flows through normal relay handling,
so the genuine node (or another cache-holder) can answer, while our own
spoofed TX stays bounded. Repeats of the same packet id are already
absorbed by the router's duplicate detection, and the stats counter now
only counts replies actually sent.

Also log purgeNode() only when a slot was actually cleared - it runs
for every NodeDB removal, including nodes the caches never tracked.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

* TrafficManagement: consolidate NodeInfo-cache #if sprawl into one region

Fourteen scattered #if TMM_HAS_NODEINFO_CACHE guards (one per function,
each with its own #else stub of (void) casts) collapse into a single
guarded region holding every NodeInfo-cache-only function, terminated
by one #else block of no-op stub definitions. Because the stubs now
exist on every build, the call sites in runOnce(), purgeNode() and
purgeAll() drop their guards too; inner guards remain only for
orthogonal features (PKI, warm tier) and for real conditional work
(constructor allocation, PSRAM paths in shouldRespondToNodeInfo).

No behavior change. Compile-checked on both sides of the macro: the
native app build (stubs) and the native unit-test build (region).

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

* Router: resolve sender key only for PKI-decrypt candidates

perhapsDecode() resolved the sender's public key unconditionally for
every encrypted packet, before even checking whether the packet could
be PKI-decrypted (channel 0, unicast to us). Since copyPublicKey()
grew its TrafficManagement fallback tier, a full hot+warm miss - the
common case for channel traffic from senders outside both NodeDB
tiers - additionally walked the 2000-entry NodeInfo cache under its
lock, per packet, for a key that was then discarded.

Move the resolution inside the PKI-candidate branch; remotePublic and
haveRemoteKey had no consumers outside it.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

* TrafficManagement: refresh NodeInfo membership hourly, not per-sweep

The 60 s sweep re-derived isMember with a per-entry NodeDB lookup:
O(entries x members) - about 700k node-number comparisons per minute on
a full PSRAM cache (2000 entries x 250 hot + 100 warm), with strided
PSRAM reads, all while holding cacheLock against the packet path.

Move the refresh into the hourly reconcile pass, which is already
O(members x entries): after the seeding loops (so the upsert pass still
sees last pass's bits for spareMembers protection), clear every
isMember bit and re-mark from both NodeDB tiers - including keyless
warm records, which seed nothing but are still members.

Accepted tradeoff, now documented on the field: membership lags a
passive NodeDB eviction by up to an hour (the entry just stays
LRU-sticky slightly longer). Additions stay immediate via the
write-through hooks, explicit removals via purgeNode().

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

* NodeDB: centralize bare-key commits in commitRemoteKey()

The two key-write sites that bypass updateUser() (admin-channel learn
in Router::perhapsDecode, manual verification in KeyVerificationModule)
each carried their own #if HAS_TRAFFIC_MANAGEMENT write-through
boilerplate - the pattern this PR itself had to retrofit twice, and
which any future direct key write would silently miss, leaving the
TrafficManagement cache divergent until the next hourly reconcile.

Add NodeDB::commitRemoteKey(n, key32, KeyCommitTrust): writes the key
to the hot store and routes the TrafficManagement write-through in one
place, with provenance explicit at the call site (AdminChannelProven
maps to TOFU-grade, ManuallyVerified to proven). The bypass sites keep
their reason for existing - bare-key commits with provenance that
updateUser's User-payload/TOFU-pin path cannot express - but no longer
know about TrafficManagement at all; both stale includes are dropped
(Router's was already unused on develop).

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

* docs: tick wrap-safety analysis, updated cadences, CodeRabbit doc fixes

node_info_stores.md gains a "Tick clocks and wrap safety" section
recording which mechanism keeps each modular tick clock honest: the
unified-cache clocks pair the 60 s sweep with read-time window resets,
the NodeInfo obs/resp clocks are sweep-only (hence the compile-time
invariant that maintainNodeInfoCacheLocked() is guarded by
TMM_HAS_NODEINFO_CACHE alone), and the warm tier is immune by design -
absolute unix-seconds, no wrap until 2106.

Also brought current with this series: membership refresh moved to the
hourly reconcile, throttled direct-response requests forward instead of
being consumed, the commitRemoteKey() bare-key funnel, and the
module-disabled gate on the write-through hooks.

CodeRabbit doc review (PR #11050): present the NodeInfo payload cache
as the third *identity* tier with the unified cache beside the chain,
and describe NodeInfoLite's flattened fields / satellite copy-out
accessors instead of the removed nested members. Two stale
docs/tmm_node_stores.md references in the header now point at the real
file.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

* TrafficManagement: adapt tests to forwarded throttles and hourly membership

Throttle tests (PSRAM and NodeDB-fallback paths): a request inside the
30 s window now CONTINUEs into normal relay handling instead of being
consumed - assert no spoofed TX, no NAK suppression, and (PSRAM path)
that nodeinfo_cache_hits counts only replies actually sent.

Membership test (renamed reconcileMembershipMarking): the per-minute
sweep no longer refreshes isMember, so the test now pins down both
halves of the new contract - the very next sweep after a passive NodeDB
eviction still shows the stale member bit (the documented up-to-an-hour
lag), and a reconcile interval's worth of sweeps clears it.

Disabled-module test additionally proves the write-through hooks share
the has_traffic_management gate: a key commit while disabled must not
land in the NodeInfo cache.

Not covered here: a build permutation with TRAFFIC_MANAGEMENT_CACHE_SIZE
overridden to 0 (the configuration the maintenance-guard fix protects)
would need its own PlatformIO env plus guards on every unified-cache
test - left as a follow-up.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

* expand test coverage

* nitpicks and docs update

* more comment fixes

* nitpicks

* test: make TMM fixture cleanup abort-safe in tearDown()

Several tests reset per-test global state (trafficManagementModule pointing at a
stack `module`, owner.public_key, the RTC fake clock) only after their assertions.
A TEST_ASSERT_* failure longjmps out and skips that trailing cleanup, leaving the
state to dangle into later cases - concretely, the next setUp()'s resetNodes()
would call trafficManagementModule->purgeAll() on a destroyed object.

Move the resets into tearDown(), which runs unconditionally between tests, and drop
the now-redundant per-test cleanups. Addresses a CodeRabbit review comment on
PR #11050.

clod helped too

* docs tidy

* Throttle NodeInfo direct responses

A direct response is addressed to the requesting packet's from field, which
is unauthenticated, and is sent by every neighbour that holds the target in
cache. One request therefore makes several nodes transmit at an address the
requester chose, and nothing limited how often that could be repeated.

Replies are now spaced per requester, which bounds how much any single node
can be made to receive, plus a global floor on how much airtime the feature
can consume. The check sits where a reply is about to be sent, so requests
declined for other reasons do not consume the budget.

* test: reconcile TMM direct-response tests with #11104 throttle

Makes the suite green for now. #11104's per-requester + global-floor
throttle (60 s) is layered over the branch's per-target throttle, so the
three existing "served again" checks (psram, fallback, sweep) now use a
fresh requester to avoid the per-requester window masking the mechanism
each one actually exercises. Adds a dedicated test for the new
per-requester + 1 s global-floor behaviour (the reflector-flood gap the
per-target throttle leaves open, and the bound that survives on
non-PSRAM builds).

Deferred: the branch's now-redundant fallback global stamp
(nodeInfoFallbackLastResponseMs) is left in place as a follow-up cleanup.

Clod wants credit.

* TMM: unify direct-response throttles into per-sender + per-target RAM tables

Replace the two path-specific NodeInfo-spoof throttles (per-entry respTick on
the PSRAM cache path, single global stamp on the fallback path) with three
symmetric bounds that behave identically with and without PSRAM:

  - per requester (60 s): how much any one node can be made to receive;
  - per target   (60 s): how often we vouch for the same identity;
  - global floor (1 s):  total airtime, the backstop once an attacker cycles
    requester/target past the 8-slot tables.

Both axes are fixed 8-slot LRU tables in internal RAM (not the PSRAM NodeInfo
cache), compared by wrap-safe uint32 ms subtraction, so there is no tick clock
and no sweep to maintain. directResponseAllowed() resolves both slots before
stamping either, so a reply one axis throttles never consumes the other's
budget, and records the send itself.

Retires: nodeInfoFallbackLastResponseMs, kNodeInfoResponseThrottleMs,
nowStampMs, the respTick byte + hasResponded bit on every cache entry,
currentRespTick/kNodeInfoRespTickMs/kNodeInfoThrottleTicks, and the sweep's
respTick clear. Renumbers peekNodeInfoFlagsForTest (drops the responded bit).

Tests: the psram/fallback throttle tests now assert the per-target axis at 60 s,
isolated via a different requester, proving it holds with and without PSRAM;
perRequesterAndGlobalFloor isolates the other two axes; the obsolete respTick
wrap-safety test is removed. 83/83 native cases pass.

clod helped too

* whats up, doc?

* trimming the comments

* test: bump native-suite-count to 38 after upstream rebase

Upstream develop carries 38 test_* suite directories but its
native-suite-count file still reads 37 (a suite was added without
bumping the count). Rebasing onto develop inherits that stale file,
so the runner flags AMBER. Correct the registered total to 38.

clod helped too

---------

Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
 2026-07-21 12:19:43 +02:00
Tom
ff951059cf test: correct native-suite-count to 37 (#11059) 
native-suite-count drifted from the actual test/test_*/ directory count: #10669
added two suites (test_admin_session_repro, test_pki_admin_fallback) but bumped
the count by only one, and #11037 added test_xmodem without bumping it at all.
The file reads 35 against 37 real suites, which bin/run-tests.sh reports as AMBER
on every full run. Correct it to 37.
 2026-07-18 14:20:59 -05:00
Jonathan Bennett
8d1fbbf55f Snake! (#10936) 
* Snake!

* Add spiLock to snake score saving

* Check fixes

* More careful locking

* WIP: Big Display Node

* Update src/graphics/HUB75Display.cpp

Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>

* Add HUB75 Native

* Add Tetris game module with core logic and UI integration

- Implement TetrisGame class for game logic, including piece movement, rotation, and line clearing.
- Create TetrisModule class to manage game state, input handling, and rendering on OLED display.
- Introduce high score tracking with persistence and optional mesh broadcasting.
- Define UI states for title, playing, paused, game over, and high scores.
- Implement input handling for game controls and state transitions.
- Add rendering functions for the game board, high scores, and title screen.

* feat(snake): add snake graphics and update display logic in SnakeModule

* Prompt for Initials for Tetris, too

* refactor games module

* Games refactor

* hub75 native double buffer

* Games tuning

* Make joystick repeat events on held button

* Add clouds and colors

* Fix breakout and more color

* difficulty tuning

* trunk

* refactor game announcements, etc

* Scale chirpy gravity as game speed increases

* Portduino, check for hub75 display before reading in hub75 options

* Final(?) games tuning

* Potential fix for pull request finding

Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>

* Properly ignore input when games screen not shown

* Fail gracefully when HUB75 is selected but not supported.

---------

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
Co-authored-by: Ixitxachitl <kramerfm@gmail.com>
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
 2026-07-16 18:35:33 -05:00
Jonathan Bennett
952c825167 Allow key verification to work for unknown nodes. (#10669) 
* Allow key verification to work for unknown nodes.

* trunk

* More reliable admin key decryption

* Add admin key fallback tests

* Actually check haveRemoteKey

* Logging cleanup

* Address review feedback

- Persist the committed key + manually-verified flag in
  commitVerifiedRemoteNode via saveToDisk(SEGMENT_NODEDATABASE),
  replacing the "todo: initiate save"
- Guard the CryptoEngine pending-key slot with a dedicated internal
  lock; the Router reads it while already holding the non-recursive
  cryptLock, so the accessors cannot reuse that lock
- Draw the security number from the hardware RNG (CryptRNG fallback)
  under cryptLock instead of random(); on nRF52 the entropy fill
  toggles the same CC310 the BLE task's packet crypto uses
- Return true after fully handling the hash2 response (restores
  develop behavior; consistent with the hash1 branch)
- Take uint32_t in the number-picker callbacks so 8-digit hex
  nodenums can't truncate through int
- Trim over-long comments flagged by review

* feat(tests): add deterministic tests for admin session-key behavior

---------

Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2026-07-14 21:38:41 -05:00
p0ns
ca833d944c Fix serial protobuf corruption on short USB CDC writes (#10976) 
* Fix serial protobuf corruption on short writes

SerialConsole shared raw debug output and framed protobuf traffic on one
HWCDC stream. Raw text could interleave inside an active frame when API
logging was disabled. Separately, HWCDC deliberately returns a short write
after bounded backpressure; StreamAPI abandoned that frame after PhoneAPI
had already advanced, so the next 0x94c3 header landed inside the previous
declared payload.

Suppress all unframed output after protobuf mode starts and honor the
existing config-replay log pause. For HWCDC, retain short frame tails in the
persistent tx buffers and finish them on later loop passes before dequeuing
another FromRadio packet. Logs remain best-effort and only start when their
complete frame fits; main packets are deferred rather than dropped if a
synchronous log is pending. Do not call HWCDC flush for framed serial output,
since its no-progress path can discard queued bytes. TCP and non-HWCDC
transports keep their existing behavior.

Validated on Cardputer ADV (200-node DB) and Heltec Tracker V2: 400 initial
full-DB sessions plus 140 final sessions across both API-log settings, zero
malformed frames/timeouts/incomplete DBs; 2-20s forced reader stalls resume
with complete DBs; abrupt stalled-client replacement 5/5 per board; 150s
post-close reboot counts stable. Builds pass for Cardputer, Heltec, tbeam,
and rak4631.

* Add serial frame continuation regression tests

Extract the HWCDC pending/deferred frame state machine into a small
transport-independent helper so native tests exercise the same production
logic used by SerialConsole. Keep framing, persistent buffer ownership and
locking in SerialConsole.

Cover short-tail continuation, deferred main-frame ordering, best-effort log
admission, bounded zero-progress calls, generic StreamAPI failure semantics,
PhoneAPI advancement gating, framed-log gating and raw output suppression.
The coverage suite passes 31/31 suites and 582/582 tests.

* Address review: guard flush, assert deferred invariant, dedup framing

- Make SerialConsole::flush() a no-op in protobuf mode: HWCDC::flush()'s
  no-progress path discards queued TX bytes, which would tear a framed
  stream when the sleep path flushes with a stalled host.
- Assert the single required-frame producer invariant in
  StreamFrameWriter::writeFrame() instead of silently dropping a second
  required frame.
- Hoist 0x94C3 header construction into StreamAPI::buildFrameHeader() so
  SerialConsole no longer re-hardcodes the framing constants.

* Test retained serial tail across client replacement

Model a replacement client arriving while an older required frame has an
unwritten tail. Require the old frame to complete before the new frame starts,
so a new 0x94C3 header can never land inside the old declared payload.

* Document serial frame APIs and regression tests

Add concise Doxygen comments for the frame continuation hooks, production
helper, native test doubles, and regression scenarios. Document why retained
frame tails intentionally survive client disconnects: HWCDC may still hold the
accepted prefix, so dropping metadata could insert a new frame header inside
the old declared payload.
 2026-07-11 06:27:50 -05:00
Ben Meadors
8d20606203 feat(config): make position & telemetry broadcast opt-in (#10929) 
Position sharing was opt-out (the default primary channel shipped
position_precision=13) while device telemetry was already opt-in, and a
normal firmware upgrade preserves saved config, so existing nodes stayed
position-on. This makes both broadcasts opt-in, both on a fresh flash and via
a one-time migration for upgrading nodes.

- Fresh default: initDefaultChannel now sets position_precision=0.
- One-time migration in loadFromDisk, gated on a dedicated
  POSITION_TELEMETRY_OPTIN_VER (26) watermark kept separate from
  DEVICESTATE_CUR_VER (bumping that would re-run the NodeDatabase v24
  legacy decoder on already-migrated v25 DBs): disables position broadcast
  on PUBLIC/default-PSK channels and forces every device-telemetry
  mesh-broadcast flag plus the MQTT map-report location off.
- Private-PSK channels are left untouched: a channel with a custom key is a
  deliberate trusted-group setup, so its configured precision is preserved.
- Idempotent: ordinary saves never re-stamp .version, so a user who
  re-enables sharing is not re-disabled on the next boot.
- Added pure channelFileUsesPublicKey() (operates on the raw ChannelFile,
  since the channels singleton isn't initialized during loadFromDisk) and
  refactored Channels::usesPublicKey() to delegate to it.
- New test/test_optin_migration native suite (14 cases).
 2026-07-07 14:58:58 -05:00
Ben Meadors
6c7ee8afc7 Add MemAudit: per-subsystem heap accounting in the boot log (#10900) 
* Add MemAudit: per-subsystem heap accounting in the boot log

The 2.8.0 nRF52840 heap-exhaustion field reports had to be diagnosed by
hand, reconstructing each subsystem's heap footprint from source and
build flags one report at a time. This makes every future report
self-diagnosing from the serial log: a tiny fixed-size registry
(src/memory/MemAudit.*) that big long-lived allocations report into,
printed as one line at the end of setup() and alongside the periodic
"Heap free:" log:

  MemAudit[boot]: tmm=2500 warm=4000 pkthist=5824 nodedb=13440
  msgstore=2200 pktpool(live)=3270 total=31234

Instrumented: NodeDB hot vector (nodedb) + satellite maps (satmaps,
rb-tree overhead estimated), WarmNodeStore (warm), PacketHistory records
and hash index (pkthist), TrafficManagement caches (tmm/tmm_ni),
MessageStore text pool (msgstore), TFT line/repaint buffers (display),
and live in-flight packets (pktpool(live)) via an optional audit tag on
the packet pool allocator - the one hot path, counted with a relaxed
32-bit atomic add (single instructions on Cortex-M, no locks).

Cost: 128 B RAM for the 16-tag table, well under 1 KB flash on rak4631.
MESHTASTIC_MEM_AUDIT=0 compiles it out to inline no-op stubs (call
sites need no ifdefs); STM32WL, the tightest flash target, defaults off.

New native suite test_mem_audit covers add/set/snapshot arithmetic, tag
reuse (pointer and cross-TU strcmp fallback), null/unknown tags, and
table-full behavior; test/native-suite-count bumped to 28.

* native-wasm: add src/memory/ to the curated source filter

The wasm env denies all sources and adds an explicit file list; MemAudit
callers (main, MeshService, NodeDB, PacketHistory) are in that list but
src/memory/MemAudit.cpp was not, so wasm-ld failed on undefined
memaudit:: symbols.
 2026-07-06 13:18:49 -05:00
Ben Meadors
b4dd76a4db Harden against crafted-packet crashes + adversarial fuzzing (#10862) 
Audit and fuzzing of the RF-packet decode -> dispatch -> display/phone paths for
the "crash a node or phone with a crafted packet" surface, beyond the XEdDSA
authenticity work.

Crash fixes (reproduced under AddressSanitizer / UBSan):
- GeoCoord::latLongToUTM/latLongToMGRS read fixed letter tables out of bounds on
  extreme latitude_i/longitude_i from a received Position, and narrowed
  out-of-range easting/northing doubles to unsigned (float-cast-overflow UB).
  Clamp the UTM zone, the easting/northing narrowing, and the band/col/row
  indices. Regression: test_geocoord_extreme_coords_no_oob.
- EnvironmentTelemetry/AirQualityTelemetry render attacker floats via
  String(float), which on nRF52/RP2040/STM32/portduino formats into a fixed
  char[33] (dtostrf) and overflows near FLT_MAX. Clamp the rendered metrics via
  UnitConversions::displaySafeFloat (finite + magnitude <= 1e9), unit-tested in
  test_type_conversions.

Defense-in-depth + robustness:
- TraceRouteModule::printRoute: fix an snr_back[-1] OOB read (wrong count in the
  guard) and stop formatting the INT8_MIN "unknown SNR" sentinel as a dB value.
- WaypointModule/NodeDB: sanitize untrusted strings before the OLED renderer and
  the phone-facing ClientNotification (belt-and-suspenders vs PB_VALIDATE_UTF8).
- MeshService::sendToPhone: withhold NODEINFO/WAYPOINT packets whose nested string
  won't cleanly decode, protecting strict phone protobuf decoders without
  affecting mesh relay.

Tests: new test_fuzz_decode (protobuf decode + UTF-8 sanitizer fuzz) and
test_fuzz_packets (perhapsDecode / module-handler / traceroute / phone-gate fuzz),
all under AddressSanitizer; native-suite-count 25 -> 27. Full suite 515/515 green.
 2026-07-02 16:50:49 -05:00
Tom
ec5d230305 Feat/mesh beacon (#10618) 
* Tips robot virtual node / relayer to different LoRa modes & channels

Note that this commit has details hardcoded for the Wellington (NZ)
mesh, and also requires the following patch to the protobufs:

-----
diff --git a/meshtastic/mesh.proto b/meshtastic/mesh.proto
index 03162d8..ec54c99 100644
--- a/meshtastic/mesh.proto
+++ b/meshtastic/mesh.proto
@@ -1393,6 +1393,21 @@ message MeshPacket {
    * Set by the firmware internally, clients are not supposed to set this.
    */
   uint32 tx_after = 20;
+
+  /*
+   * The modem preset to use fo rthis packet
+   */
+  uint32 modem_preset = 21;
+
+  /*
+   * The frequency slot to use for this packet
+   */
+  uint32 frequency_slot = 22;
+
+  /*
+   * Whether the packet has a nonstandard radio config
+   */
+  bool nonstandard_radio_config = 23;
 }

 /*
-----

* fix: repair mesh tips CI build

* feat: add MeshBeacon module (Phase 1 — proto + generated code + initial stub)

* feat(beacon): implement broadcaster + listener (phases 2-5)

* feat(beacon): wire RadioLibInterface hooks + admin validation (phases 6-7)

* fix(beacon): fix LocalModuleConfig flat access (no payload_variant), add localonly proto field

* feat(beacon): fix broadcaster inheritance, add preset/region validation + proto cache

- MeshBeaconBroadcastModule now inherits ProtobufModule<meshtastic_MeshBeacon>
  (alongside private MeshBeaconModule + OSThread), giving it allocDataPacket()
  and setStartDelay() without extra includes.

- Payload cache: rebuildCache() encodes the MeshBeacon protobuf once and stores
  it in payloadCache[]/payloadCacheSize; sendBeacon() only calls rebuildCache()
  when payloadCacheDirty==true. AdminModule calls invalidateCache() after saving
  new config so the next broadcast picks up changes.

- Region/preset validation in handleSetModuleConfig (mesh_beacon_tag):
  broadcast_on_preset is validated against the device's current region via
  RadioInterface::validateConfigLora(); broadcast_offer_region is validated via
  RadioInterface::validateConfigRegion(). Invalid values are zeroed with a
  LOG_WARN before saving.

* feat(beacon): add unit tests for MeshBeaconModule and AdminModule configuration validation

* remove old meshtips

* more  validation in NodeDB and AdminModule, and userprefs for baked in goodness

* copilot is my gravity

* mmmmm... beacon

* oops

* Enhance unit tests for MeshBeaconModule with detailed validation checks and output formatting

* new lines. Why not?

* finally

* legacy mode activate!

* Update protobufs (#17)

Co-authored-by: NomDeTom <116762865+NomDeTom@users.noreply.github.com>

* better logic, fixed a test

* updated for packet signing
fixed a test
added guards for licensed/ham mode

* channel numbers

* beacon: encrypt on the beacon channel PSK; fix split note

When broadcast_on_channel overrides the primary channel's name/PSK, the
beacon was encrypted with the PRIMARY PSK: perhapsEncode keys encryption
off the primary slot, but the radio-thread channel switch happens only
after encryption. sendBeaconPacket() now installs the beacon channel into
the primary slot for the synchronous duration of send() (cooperative
threading => no interleaving) so encryption/hash use the beacon channel,
then restores it. A shared beaconChannelSettings() helper builds the
channel for both the encrypt-time swap and the RF-time swap so the
key+hash cannot drift.

Also: correct the legacy-split comments (both packets go out on the same
beacon radio settings, not the normal config) and merge the two
consecutive `if (hasText)` blocks in the listener (cppcheck
duplicateCondition).

Tests: add channelPskOverride_swapsBeaconChannelAndRestores and
noChannelOverride_doesNotSwapPrimary; MockRouter snapshots the primary
channel at send() time.

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>

* test/beacon: drain toPhoneQueue in tearDown to fix LSan leak abort

The listener delivers received text via MeshService::sendToPhone(), which
enqueues the packet into toPhoneQueue and takes ownership. Nothing dequeues
it in tests, so the three listener tests carrying message text stranded a
MeshPacket each — 1272 bytes / 3 allocations that LeakSanitizer flagged at
process exit, aborting the coverage run (surfaced by pio as [ERRORED] /
SIGHUP even though all 40 assertions passed).

Drain the phone queue in tearDown (getForPhone()/releaseToPool) so the
packets return to packetPool. Suite is now GREEN with no sanitizer abort.

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>

* legacy hop override for zero-hoppers

* ever more beacons

* beacon: comment out broadcast_send_as_node pending further review

Functionality preserved in comments with full signing/has_bitfield notes
for when it is re-enabled. Proto tag 3 retained on the wire.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

* test/beacon: fix fromIsCustomNodeWhenSet now that send-as-node is disabled

broadcast_send_as_node is commented out; from is always the local node.
Update the test assertion and doc comment to match current behaviour.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

* Update protobufs (#21)

Co-authored-by: NomDeTom <116762865+NomDeTom@users.noreply.github.com>

* flags for beacons

* beacon: do more with less — slot-index targets + validation

Multi-target beacons embedded a full ChannelSettings in every BroadcastTarget,
blowing ModuleConfig past the 512-byte BLE FromRadio budget so the firmware would
not compile. Targets now reference an existing channel-table slot by channel_index
and the broadcaster resolves it via channels.getByIndex() at TX time. Net effect:
the same multi-target capability for a fraction of the bytes —
FromRadio 609 -> 510 B, MeshBeaconConfig 596 -> 324 B, AdminMessage 615 -> 511 B.

- proto: BroadcastTarget.channel (embedded) -> channel_index (uint32 ref); regen all
  generated headers (size constants propagate to admin/localonly/deviceonly/mesh).
- broadcaster: resolve channel_index from the channel table; an out-of-range or blank
  slot falls back to the default channel for the target preset rather than borrowing
  the primary's name/PSK.
- AdminModule: validate broadcast_targets entries on write (region/preset sanitised
  like the single-target fields; channel_index range-checked).
- userPrefs: TARGET_<n>_CHANNEL_{NAME,NUM,PSK} collapse to a single CHANNEL_INDEX.
- docs: two-step (set_channel -> set_module_config) multi-target setup, inline-vs-
  reference distinction, and single-/multi-target are equal (not "legacy") options.
- tests: target validation + channel-index resolution incl. blank-slot fallback
  (47/47 green on `./bin/run-tests.sh -e native -f test_mesh_beacon`).

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NRAF5csgsMn6p1zEcFL8Qz

* throttling after reboot

* address copilot review

* simplify

* fix(beacon): use 0x%08x for node/packet IDs in logs; register test suite

The %#08lx log specifiers passed uint32_t (NodeNum/PacketId) to a %lx
length modifier — undefined behaviour on 64-bit (native test) targets and
non-standard width. Switch to the project-standard 0x%08x. Also bump
test/native-suite-count to 25 for the added test_mesh_beacon suite.

clod helped too

* copilot & clarity
clod helped too

* refactor(beacon): use auto for the sanitized config copy

clod helped too

* fix(beacon): guard empty-payload sends; gate has_mesh_beacon on build flag; document ISR_TX pre-switch

clod helped too

---------

Co-authored-by: Steve Gilberd <steve@erayd.net>
Co-authored-by: Darafei Praliaskouski <me@komzpa.net>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
 2026-06-27 08:20:51 -05:00
nomdetom
0094ad0444 address copilot review 2026-06-25 13:44:09 +01:00