mirror of
https://github.com/meshtastic/firmware.git
synced 2026-11-07 23:04:49 -05:00
Jonathan BennettandClaude Opus 5.5
13ce189bc1
-DLR2021_TX_PRESTAGE (default off) writes the payload into the TX FIFO in the standby before the CAD, so a clear verdict sends only the packet params, IRQ setup and SET_TX. The FIFO appends, so bytes a busy verdict left unsent are cleared before the next write. Needs -DRADIOLIB_GODMODE=1. -DLR2021_PRESTAGE_UPSTREAM (with LR2021_TX_PRESTAGE, default off) stages through RadioLib's prestageTransmit() (jgromes/RadioLib#1883) instead, whose stageMode(TX) skips the FIFO write for the staged payload. It needs a RadioLib with #1883 but no GODMODE. Co-Authored-By: Jonathan Bennett <jbennett@incomsystems.biz> Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01REkPVFh6kvG4AZJ5A8AtM9
Meshtastic Firmware
Overview
This repository contains the official device firmware for Meshtastic, an open-source LoRa mesh networking project designed for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware supports various hardware platforms, including ESP32, nRF52, RP2040/RP2350, and Linux-based devices.
Meshtastic enables text messaging, location sharing, and telemetry over a decentralized mesh network, making it ideal for outdoor adventures, emergency preparedness, and remote operations.
Get Started
- 🔧 Building Instructions - Learn how to compile the firmware from source.
- ⚡ Flashing Instructions - Install or update the firmware on your device.
Join our community and help improve Meshtastic! 🚀
Stats
