mirror of
https://github.com/meshtastic/firmware.git
synced 2026-09-16 00:10:11 -04:00
Matias DendaandJonathan Bennett
32eb1a1237
The simradio flag (-s) is the first branch of an if/else-if chain that also handles config loading, so it short-circuits every later branch -- including the one for an explicit -c <path>. Skipping config discovery under -s is intended, but a config path the user passed by hand is not discovery, and it is silently ignored today. Move the -s check after the -c branch so an explicit path is always parsed, and skip only the implicit discovery (./config.yaml, /etc/meshtasticd/config.yaml) when -s is given without -c. The radio override then runs after every config source, since -c and its ConfigDirectory entries can both set Lora.Module and -s has to win over them. Doing it there also fixes --check and --output-yaml, which reported the configured module rather than the simulated one because the old override sat behind an early return. Behaviour with a bare -s is unchanged: no YAML is loaded and the radio is the simulator. Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Meshtastic Firmware
Overview
This repository contains the official device firmware for Meshtastic, an open-source LoRa mesh networking project designed for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware supports various hardware platforms, including ESP32, nRF52, RP2040/RP2350, and Linux-based devices.
Meshtastic enables text messaging, location sharing, and telemetry over a decentralized mesh network, making it ideal for outdoor adventures, emergency preparedness, and remote operations.
Get Started
- 🔧 Building Instructions - Learn how to compile the firmware from source.
- ⚡ Flashing Instructions - Install or update the firmware on your device.
Join our community and help improve Meshtastic! 🚀
Stats
