mirror of
https://github.com/meshtastic/firmware.git
synced 2026-11-07 23:04:49 -05:00
Jonathan BennettandClaude Opus 5.5
41e9d13ec4
-DLR2021_CAD_EXIT_LBT (default off) arms the whole TX before the scan, with the payload LR2021_TX_PRESTAGE staged, and scans with SetLoraCadParams exit mode 0x10: a clear CAD keys the chip up by itself, so launchTransmit() only releases the latched CAD flags. A busy verdict leaves the chip in standby, reported busy without a CAD>RX handoff, and a refused scan is reported busy rather than sent without a CAD. The outcome is read back from the chip's mode. The chip keys up without the MCU, so the RF switch must be the chip's DIOs or none. Needs LR2021_TX_PRESTAGE and -DRADIOLIB_GODMODE=1. Co-Authored-By: Jonathan Bennett <jbennett@incomsystems.biz> Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01REkPVFh6kvG4AZJ5A8AtM9
Meshtastic Firmware
Overview
This repository contains the official device firmware for Meshtastic, an open-source LoRa mesh networking project designed for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware supports various hardware platforms, including ESP32, nRF52, RP2040/RP2350, and Linux-based devices.
Meshtastic enables text messaging, location sharing, and telemetry over a decentralized mesh network, making it ideal for outdoor adventures, emergency preparedness, and remote operations.
Get Started
- 🔧 Building Instructions - Learn how to compile the firmware from source.
- ⚡ Flashing Instructions - Install or update the firmware on your device.
Join our community and help improve Meshtastic! 🚀
Stats
