mirror of
https://github.com/meshtastic/firmware.git
synced 2026-11-06 14:24:20 -05:00
Claude
70bd2cc579
- Read-back compares the settings that decide what is on the air (region, preset or bandwidth/SF, coding rate, slot or frequency, tx_enabled), not just transparent_mode. A device that rejects a LoRa config restores its old one whole, transparent_mode included, so that is now "Refused": retried after 5 minutes or at once on this node's next config change. Only a device that took the settings and still reads transparent_mode false is old firmware. - The same comparison decides whether a device is already set up, so fields the device normalises no longer cause a push on every reconnect. coding_rate, spread_factor and bandwidth are clamped the way the device's AdminModule stores them. - Firmware that reports a release older than 2.8.3 is refused before any set_config reaches it. - With no LoRa region set here, nothing is pushed (it would set the device's region to UNSET and turn its TX off); setting a region pushes. - Frames held for their own radio settings (RadioTxHooks::holdsRadio, e.g. MeshBeacon on another preset) are dropped, since the device can't switch per packet, and the hooks hear about every released frame. - Reconnect attempts back off from 5 s to 60 s: opening a TCP link blocks the main loop. - hop_limit/hop_start are clamped as encodeRadioBuffer() does instead of being refused by the device; slot_parity is no longer forwarded. - Lora.Module transparent leaves spidev empty, so the SPI bus is untouched. - Queued frames are released on destruction; the late-window clamp only reschedules when the moved frame is the front.
Meshtastic Firmware
Overview
This repository contains the official device firmware for Meshtastic, an open-source LoRa mesh networking project designed for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware supports various hardware platforms, including ESP32, nRF52, RP2040/RP2350, and Linux-based devices.
Meshtastic enables text messaging, location sharing, and telemetry over a decentralized mesh network, making it ideal for outdoor adventures, emergency preparedness, and remote operations.
Get Started
- 🔧 Building Instructions - Learn how to compile the firmware from source.
- ⚡ Flashing Instructions - Install or update the firmware on your device.
Join our community and help improve Meshtastic! 🚀
Stats
