mirror of
https://github.com/meshtastic/firmware.git
synced 2026-06-01 20:57:22 -04:00
95bbcd2cb7411c10e34747c1f2c65da30daacecf
* When channel is active, first try receiving that packet Afterwards we'll try transmitting again * Remove setStandby in startSend Already done in isChannelActive() * Set LORA_DIO1 as RadioLib GPIO for SX127x * LORA_DIO1 for Heltec v1, overlaps with GPS_TX Set to RADIOLIB_NC for now * If receive was not successful, startReceive doesn't trigger the interrupt So we have to go back to transmitting anyway --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Meshtastic Firmware
Overview
This repository contains the device firmware for the Meshtastic project.
Building Instructions Flashing Instructions
Stats
Languages
C++
62.7%
C
28.4%
Python
8%
Shell
0.5%
Batchfile
0.2%
Other
0.1%