mirror/motion
1
0
Fork 0
mirror of https://github.com/Motion-Project/motion.git synced 2026-02-05 12:31:43 -05:00
Code Issues Packages Projects Releases Wiki Activity
Files
e8161e28253f82bbbd4e0c19ef058251e4f3ea18
motion/netcam_http.c
Mr-DaveDev fa974d799c Revert mjpeg and static processing
2018-10-11 18:12:55 -06:00

1849 lines
64 KiB
C
Raw Blame History

/***********************************************************
* netcam_http.c
* Process network camera images using http protocol
* This code was inspired by the original netcam.c module
* written by Jeroen Vreeken and enhanced by several Motion
* project contributors, particularly Angel Carpintero and
* Christopher Price.
*
* Copyright 2005, William M. Brack
* This software is distributed under the GNU Public license
* Version 2. See also the file 'COPYING'.
***********************************************************/
#include "translate.h"
#include "motion.h" /* Needs to come first, because _GNU_SOURCE_ set there. */
#include "netcam_http.h"
#define CONNECT_TIMEOUT 10 /* Timeout on remote connection attempt */
#define READ_TIMEOUT 5 /* Default timeout on recv requests */
#define POLLING_TIMEOUT READ_TIMEOUT /* File polling timeout [s] */
#define POLLING_TIME 500*1000*1000 /* File polling time quantum [ns] (500ms) */
#define MAX_HEADER_RETRIES 5 /* Max tries to find a header record */
#define MINVAL(x, y) ((x) < (y) ? (x) : (y))
/* These strings are used for the HTTP connection. */
static const char *connect_req;
static const char *connect_req_http10 = "GET %s HTTP/1.0\r\n"
"Host: %s\r\n"
"User-Agent: Motion-netcam/" VERSION "\r\n";
static const char *connect_req_http11 = "GET %s HTTP/1.1\r\n"
"Host: %s\r\n"
"User-Agent: Motion-netcam/" VERSION "\r\n";
static const char *connect_req_close = "Connection: close\r\n";
static const char *connect_req_keepalive = "Connection: Keep-Alive\r\n";
static const char *connect_auth_req = "Authorization: Basic %s\r\n";
tfile_context *file_new_context(void);
void file_free_context(tfile_context* ctxt);
/**
* check_quote
*
* Checks a string to see if it's quoted, and if so removes the
* quotes.
*
* Parameters:
*
* str Pointer to a string.
*
* Returns: Nothing, but updates the target if necessary.
*
*/
static void check_quote(char *str)
{
int len;
char ch;
ch = *str;
if ((ch == '"') || (ch == '\'')) {
len = strlen(str) - 1;
if (str[len] == ch) {
memmove(str, str+1, len-1);
str[len-1] = 0;
}
}
}
/**
* netcam_check_content_length
*
* Analyse an HTTP-header line to see if it is a Content-length.
*
* Parameters:
*
* header Pointer to a string containing the header line.
*
* Returns:
* -1 Not a Content-length line.
* >=0 Value of Content-length field.
*
*/
static long netcam_check_content_length(char *header)
{
long length = -1; /* Note this is a long, not an int. */
if (!header_process(header, "Content-Length", header_extract_number, &length)) {
/*
* Some netcams deliver some bad-format data, but if
* we were able to recognize the header section and the
* number we might as well try to use it.
*/
if (length > 0)
MOTION_LOG(WRN, TYPE_NETCAM, NO_ERRNO
,_("malformed token Content-Length but value %ld"), length);
}
MOTION_LOG(DBG, TYPE_NETCAM, NO_ERRNO,_("Content-Length %ld"), length);
return length;
}
/**
* netcam_check_keepalive
*
* Analyse an HTTP-header line to see if it is a Keep-Alive.
*
* Parameters:
*
* header Pointer to a string containing the header line.
*
* Returns:
* -1 Not a Keep-Alive line.
* 1 Is a Keep-Alive line.
*
*/
static int netcam_check_keepalive(char *header)
{
char *content_type = NULL;
if (!header_process(header, "Keep-Alive", http_process_type, &content_type))
return -1;
/* We do not detect the second field or other case mixes at present. */
free(content_type);
return 1;
}
/**
* netcam_check_close
*
* Analyse an HTTP-header line to see if it is a Connection: close.
*
* Parameters:
*
* header Pointer to a string containing the header line.
*
* Returns:
* -1 Not a Connection: close.
* 1 Is a Connection: close.
*
*/
static int netcam_check_close(char *header)
{
char *type = NULL;
int ret = -1;
if (!header_process(header, "Connection", http_process_type, &type))
return -1;
if (!strcmp(type, "close")) /* strcmp returns 0 for match. */
ret = 1;
free(type);
return ret;
}
/**
* netcam_check_content_type
*
* Analyse an HTTP-header line to see if it is a Content-type.
*
* Parameters:
*
* header Pointer to a string containing the header line.
*
* Returns:
* -1 Not a Content-type line
* 0 Content-type not recognized
* 1 image/jpeg
* 2 multipart/x-mixed-replace or multipart/mixed
* 3 application/octet-stream (used by WVC200 Linksys IP Camera)
*
*/
static int netcam_check_content_type(char *header)
{
char *content_type = NULL;
int ret;
if (!header_process(header, "Content-type", http_process_type, &content_type))
return -1;
MOTION_LOG(DBG, TYPE_NETCAM, NO_ERRNO,_("Content-type %s"), content_type);
if (!strcmp(content_type, "image/jpeg")) {
ret = 1;
} else if (!strcmp(content_type, "multipart/x-mixed-replace") ||
!strcmp(content_type, "multipart/mixed")) {
ret = 2;
} else if (!strcmp(content_type, "application/octet-stream")) {
ret = 3;
} else {
ret = 0;
}
free(content_type);
return ret;
}
/**
* netcam_read_next_header
*
* Read the next header record from the camera.
*
* Parameters
*
* netcam pointer to a netcam_context.
*
* Returns: 0 for success, -1 if any error.
*
*/
int netcam_read_next_header(netcam_context_ptr netcam)
{
int retval;
char *header;
/* Return if not connected */
if (netcam->sock == -1)
return -1;
/*
* We are expecting a header which *must* contain a mime-type of
* image/jpeg, and *might* contain a Content-Length.
*
* If this is a "streaming" camera, the header *must* be preceded
* by a "boundary" string.
*
*/
netcam->caps.content_length = 0;
/*
* If this is a "streaming" camera, the stream header must be
* preceded by a "boundary" string.
*/
if (netcam->caps.streaming == NCS_MULTIPART) {
while (1) {
retval = header_get(netcam, &header, HG_NONE);
if (retval != HG_OK) {
/* Header reported as not-OK, check to see if it's null. */
if (strlen(header) == 0) {
MOTION_LOG(WRN, TYPE_NETCAM, NO_ERRNO
,_("Error reading image header, streaming mode (1). Null header."));
} else {
/* Header is not null. Output it in case it's a new camera with unknown headers. */
MOTION_LOG(WRN, TYPE_NETCAM, NO_ERRNO
,_("Error reading image header, streaming mode (1). Unknown header '%s'")
,header);
}
free(header);
return -1;
}
retval = (strstr(header, netcam->boundary) == NULL);
free(header);
if (!retval)
break;
}
}
while (1) {
retval = header_get(netcam, &header, HG_NONE);
if (retval != HG_OK) {
MOTION_LOG(ERR, TYPE_NETCAM, NO_ERRNO,_("Error reading image header (2)"));
free(header);
return -1;
}
if (*header == 0)
break;
if ((retval = netcam_check_content_type(header)) >= 0) {
if (retval != 1) {
MOTION_LOG(ERR, TYPE_NETCAM, NO_ERRNO,_("Header not JPEG"));
free(header);
return -1;
}
}
if ((retval = (int) netcam_check_content_length(header)) >= 0) {
if (retval > 0) {
netcam->caps.content_length = 1; /* Set flag */
netcam->receiving->content_length = retval;
} else {
netcam->receiving->content_length = 0;
MOTION_LOG(ERR, TYPE_NETCAM, NO_ERRNO,_("Content-Length 0"));
free(header);
return -1;
}
}
free(header);
}
MOTION_LOG(DBG, TYPE_NETCAM, NO_ERRNO,_("Found image header record"));
free(header);
return 0;
}
/**
* netcam_read_first_header
*
* This routine attempts to read a header record from the netcam. If
* successful, it analyses the header to determine whether the camera is
* a "streaming" type. If it is, the routine looks for the Boundary-string;
* if found, it positions just past the string so that the image header can
* be read. It then reads the image header and continues processing that
* header as well.
*
* If the camera does not appear to be a streaming type, it is assumed that the
* header just read was the image header. It is processed to determine whether
* a Content-length is present.
*
* After this processing, the routine returns to the caller.
*
* Parameters:
* netcam Pointer to the netcam_context structure.
*
* Returns: Content-type code if successful, -1 if not
* -2 if Content-length = 0
*/
int netcam_read_first_header(netcam_context_ptr netcam)
{
int retval = -3; /* "Unknown err" */
int ret;
int firstflag = 1;
int aliveflag = 0; /* If we have seen a Keep-Alive header from cam. */
int closeflag = 0; /* If we have seen a Connection: close header from cam. */
char *header;
char *boundary;
/* Send the initial command to the camera. */
if (send(netcam->sock, netcam->connect_request,
strlen(netcam->connect_request), 0) < 0) {
MOTION_LOG(ERR, TYPE_NETCAM, SHOW_ERRNO
,_("Error sending 'connect' request"));
return -1;
}
/*
* We expect to get back an HTTP header from the camera.
* Successive calls to header_get will return each line
* of the header received. We will continue reading until
* a blank line is received.
*
* As we process the header, we are looking for either of
* header lines Content-type or Content-length. Content-type
* is used to determine whether the camera is "streaming" or
* "non-streaming", and Content-length will be used to determine
* whether future reads of images will be controlled by the
* length specified before the image, or by a boundary string.
*
* The Content-length will only be present "just before" an
* image is sent (if it is present at all). That means that, if
* this is a "streaming" camera, it will not be present in the
* "first header", but will occur later (after a boundary-string).
* For a non-streaming camera, however, there is no boundary-string,
* and the first header is, in fact, the only header. In this case,
* there may be a Content-length.
*
*/
while (1) { /* 'Do forever' */
ret = header_get(netcam, &header, HG_NONE);
MOTION_LOG(DBG, TYPE_NETCAM, NO_ERRNO,_("Received first header ('%s')"), header);
if (ret != HG_OK) {
MOTION_LOG(WRN, TYPE_NETCAM, NO_ERRNO
,_("Error reading first header (%s)"), header);
free(header);
return -1;
}
if (firstflag) {
if ((ret = http_result_code(header)) != 200) {
MOTION_LOG(DBG, TYPE_NETCAM, NO_ERRNO,_("HTTP Result code %d"), ret);
free(header);
if (netcam->connect_keepalive) {
/*
* Cannot unset netcam->cnt->conf.netcam_keepalive as it is assigned const
* But we do unset the netcam keepalive flag which was set in netcam_start
* This message is logged as Information as it would be useful to know
* if your netcam often returns bad HTTP result codes.
*/
netcam->connect_keepalive = FALSE;
free((void *)netcam->cnt->conf.netcam_keepalive);
netcam->cnt->conf.netcam_keepalive = strdup("off");
MOTION_LOG(NTC, TYPE_NETCAM, NO_ERRNO
,_("Removed netcam Keep-Alive flag "
"due to apparent closed HTTP connection."));
}
return ret;
}
firstflag = 0;
free(header);
continue;
}
if (*header == 0) /* Blank line received */
break;
/* Check if this line is the content type. */
if ((ret = netcam_check_content_type(header)) >= 0) {
retval = ret;
/*
* We are expecting to find one of three types:
* 'multipart/x-mixed-replace', 'multipart/mixed'
* or 'image/jpeg'. The first two will be received
* from a streaming camera, and the third from a
* camera which provides a single frame only.
*/
switch (ret) {
case 1: /* Not streaming */
if (netcam->connect_keepalive)
MOTION_LOG(NTC, TYPE_NETCAM, NO_ERRNO
,_("Non-streaming camera (keep-alive set)"));
else
MOTION_LOG(NTC, TYPE_NETCAM, NO_ERRNO
,_("Non-streaming camera (keep-alive not set)"));
netcam->caps.streaming = NCS_UNSUPPORTED;
break;
case 2: /* Streaming */
MOTION_LOG(DBG, TYPE_NETCAM, NO_ERRNO,_("Streaming camera"));
netcam->caps.streaming = NCS_MULTIPART;
if ((boundary = strstr(header, "boundary="))) {
/* On error recovery this may already be set. */
free(netcam->boundary);
netcam->boundary = mystrdup(boundary + 9);
/*
* HTTP protocol apparently permits the boundary string
* to be quoted (the Lumenera does this, which caused
* trouble) so we need to get rid of any surrounding
* quotes.
*/
check_quote(netcam->boundary);
netcam->boundary_length = strlen(netcam->boundary);
MOTION_LOG(DBG, TYPE_NETCAM, NO_ERRNO
,_("Boundary string [%s]"), netcam->boundary);
} else {
MOTION_LOG(NTC, TYPE_NETCAM, NO_ERRNO
,_("Boundary string not found in header"));
free(header);
return -1;
}
break;
case 3: /* MJPG-Block style streaming. */
MOTION_LOG(NTC, TYPE_NETCAM, NO_ERRNO
,_("Streaming camera probably using MJPG-blocks,"
" consider using mjpg:// netcam_url."));
break;
default:
/* Error */
MOTION_LOG(ERR, TYPE_NETCAM, NO_ERRNO,_("Unrecognized content type"));
free(header);
return -1;
}
} else if ((ret = (int) netcam_check_content_length(header)) >= 0) {
MOTION_LOG(NTC, TYPE_NETCAM, NO_ERRNO,_("Content-length present"));
if (ret > 0) {
netcam->caps.content_length = 1; /* Set flag */
netcam->receiving->content_length = ret;
} else {
netcam->receiving->content_length = 0;
MOTION_LOG(ERR, TYPE_NETCAM, NO_ERRNO,_("Content-length 0"));
retval = -2;
}
} else if (netcam_check_keepalive(header) == TRUE) {
/* Note that we have received a Keep-Alive header, and thus the socket can be left open. */
aliveflag = TRUE;
netcam->keepalive_thisconn = TRUE;
/*
* This flag will not be set when a Streaming cam is in use, but that
* does not matter as the test below looks at Streaming state also.
*/
} else if (netcam_check_close(header) == TRUE) {
/* Note that we have received a Connection: close header. */
closeflag = TRUE;
/*
* This flag is acted upon below.
* Changed criterion and moved up from below to catch headers that cause returns.
*/
MOTION_LOG(NTC, TYPE_NETCAM, NO_ERRNO
,_("Found Conn: close header ('%s')"), header);
}
free(header);
}
free(header);
if (netcam->caps.streaming == NCS_UNSUPPORTED && netcam->connect_keepalive) {
/* If we are a non-streaming (ie. Jpeg) netcam and keepalive is configured. */
if (aliveflag) {
if (closeflag) {
netcam->warning_count++;
if (netcam->warning_count > 3) {
netcam->warning_count = 0;
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO
,_("Both 'Connection: Keep-Alive' and "
"'Connection: close' header received. Motion removes keepalive."));
netcam->connect_keepalive = FALSE;
free((void *)netcam->cnt->conf.netcam_keepalive);
netcam->cnt->conf.netcam_keepalive = strdup("off");
} else {
/*
* If not a streaming cam, and keepalive is set, and the flag shows we
* did not see a Keep-Alive field returned from netcam and a Close field.
* Not quite sure what the correct course of action is here. In for testing.
*/
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO
,_("Both 'Connection: Keep-Alive' and "
"'Connection: close' header received. Motion continues unchanged."));
}
} else {
/*
* aliveflag && !closeflag
*
* If not a streaming cam, and keepalive is set, and the flag shows we
* just got a Keep-Alive field returned from netcam and no Close field.
* No action, as this is the normal case. In debug we print a notification.
*/
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO
,_("Received a Keep-Alive field in this set of headers."));
}
} else { /* !aliveflag */
if (!closeflag) {
netcam->warning_count++;
if (netcam->warning_count > 3) {
netcam->warning_count = 0;
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO
,_("No 'Connection: Keep-Alive' nor 'Connection: close'"
" header received.\n Motion removes keepalive."));
netcam->connect_keepalive = FALSE;
free((void *)netcam->cnt->conf.netcam_keepalive);
netcam->cnt->conf.netcam_keepalive = strdup("off");
} else {
/*
* If not a streaming cam, and keepalive is set, and the flag shows we
* did not see a Keep-Alive field returned from netcam nor a Close field.
* Not quite sure what the correct course of action is here. In for testing.
*/
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO
,_("No 'Connection: Keep-Alive' nor 'Connection: close'"
" header received.\n Motion continues unchanged."));
}
} else {
/*
* !aliveflag & closeflag
* If not a streaming cam, and keepalive is set, and the flag shows we
* received a 'Connection: close' field returned from netcam. It is not likely
* we will get a Keep-Alive and Close header together - this is picked up by
* the test code above.
* If we receive a Close header, then we want to cease keep-alive for this cam.
* This situation will occur in 2 situations:
* (a) in HTTP 1.1 when the client wants to stop the keep-alive
* (and in this case it would be correct to close connection and then
* make a new one, with keep-alive set again).
* (b) in HTTP 1.0 with keepalive, when the client does not support it.
* In this case we should not attempt to re-start Keep-Alive.
* Due to that, we accept a Connection: close header in HTTP 1.0 & 1.1 modes
*
* To tell between the sitation where a camera has been in Keep-Alive mode and
* is now finishing (and will want to be re-started in Keep-Alive) and the other
* case when a cam does not support it, we have a flag which says if the netcam
* has returned a Keep-Alive flag during this connection. If that's set, we
* set ourselves up to re-connect with Keep-Alive after the socket is closed.
* If it's not set, then we will not try again to use Keep-Alive.
*/
if (!netcam->keepalive_thisconn) {
netcam->connect_keepalive = FALSE; /* No further attempts at keep-alive */
free((void *)netcam->cnt->conf.netcam_keepalive);
netcam->cnt->conf.netcam_keepalive = strdup("off");
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO
,_("Removed netcam Keep-Alive flag because"
" 'Connection: close' header received.\n Netcam does not support "
"Keep-Alive. Motion continues in non-Keep-Alive."));
} else {
netcam->keepalive_timeup = TRUE; /* We will close and re-open keep-alive */
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO
,_("Keep-Alive has reached end of valid period.\n"
"Motion will close netcam, then resume Keep-Alive with a new socket."));
}
}
}
}
return retval;
}
/**
* netcam_disconnect
*
* Disconnect from the network camera.
*
* Parameters:
*
* netcam pointer to netcam context
*
* Returns: Nothing
*
*/
void netcam_disconnect(netcam_context_ptr netcam)
{
if (netcam->sock > 0) {
if (close(netcam->sock) < 0)
MOTION_LOG(ERR, TYPE_NETCAM, SHOW_ERRNO, _("disconnect"));
netcam->sock = -1;
}
}
/**
* netcam_connect
*
* Attempt to open the network camera as a stream device.
* Keep-alive is supported, ie. if netcam->connect_keepalive is TRUE, we
* re-use netcam->sock unless it has value -1, meaning it is invalid.
*
* Parameters:
*
* netcam pointer to netcam_context structure
* err_flag flag to suppress error printout (1 => suppress)
* Note that errors which indicate something other than
* a network connection problem are not suppressed.
*
* Returns: 0 for success, -1 for error
*
*/
int netcam_connect(netcam_context_ptr netcam, int err_flag)
{
struct addrinfo *ai;
int ret;
int saveflags;
int back_err;
int optval;
socklen_t optlen = sizeof(optval);
socklen_t len;
fd_set fd_w;
struct timeval selecttime;
char port[15];
sprintf(port,"%u",netcam->connect_port);
/* Lookup the hostname given in the netcam URL. */
if ((ret = getaddrinfo(netcam->connect_host, port, NULL, &ai)) != 0) {
if (!err_flag)
MOTION_LOG(ERR, TYPE_NETCAM, NO_ERRNO
,_("getaddrinfo() failed (%s): %s")
,netcam->connect_host, gai_strerror(ret));
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO,_("disconnecting netcam (1)"));
netcam_disconnect(netcam);
return -1;
}
/* Assure any previous connection has been closed - IF we are not in keepalive. */
if (!netcam->connect_keepalive) {
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO
,_("disconnecting netcam since keep-alive not set."));
netcam_disconnect(netcam);
/* Create a new socket. */
if ((netcam->sock = socket(ai->ai_family, SOCK_STREAM, 0)) < 0) {
MOTION_LOG(WRN, TYPE_NETCAM, SHOW_ERRNO
,_("with no keepalive, attempt to create socket failed."));
return -1;
}
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO
,_("with no keepalive, new socket created fd %d"), netcam->sock);
} else if (netcam->sock == -1) { /* We are in keepalive mode, check for invalid socket. */
/* Must be first time, or closed, create a new socket. */
if ((netcam->sock = socket(ai->ai_family, SOCK_STREAM, 0)) < 0) {
MOTION_LOG(WRN, TYPE_NETCAM, SHOW_ERRNO
,_("with keepalive set, invalid socket."
"This could be the first time. Creating a new one failed."));
return -1;
}
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO
,_("with keepalive set, invalid socket."
"This could be first time, created a new one with fd %d")
,netcam->sock);
/* Record that this connection has not yet received a Keep-Alive header. */
netcam->keepalive_thisconn = FALSE;
/* Check the socket status for the keepalive option. */
if (getsockopt(netcam->sock, SOL_SOCKET, SO_KEEPALIVE, &optval, &optlen) < 0) {
MOTION_LOG(ERR, TYPE_NETCAM, SHOW_ERRNO, "getsockopt()");
return -1;
}
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO
,_("SO_KEEPALIVE is %s")
,optval ? _("ON"):_("OFF"));
/* Set the option active. */
optval = 1;
optlen = sizeof(optval);
if (setsockopt(netcam->sock, SOL_SOCKET, SO_KEEPALIVE, &optval, optlen) < 0) {
MOTION_LOG(ERR, TYPE_NETCAM, SHOW_ERRNO, "setsockopt()");
return -1;
}
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO, _("SO_KEEPALIVE set on socket."));
}
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO
,_("re-using socket %d since keepalive is set."), netcam->sock);
/*
* We set the socket non-blocking and then use a 'select'
* system call to control the timeout.
*/
if ((saveflags = fcntl(netcam->sock, F_GETFL, 0)) < 0) {
MOTION_LOG(ERR, TYPE_NETCAM, SHOW_ERRNO, _("fcntl(1) on socket"));
netcam_disconnect(netcam);
return -1;
}
/* Set the socket non-blocking. */
if (fcntl(netcam->sock, F_SETFL, saveflags | O_NONBLOCK) < 0) {
MOTION_LOG(ERR, TYPE_NETCAM, SHOW_ERRNO,_("fcntl(2) on socket"));
netcam_disconnect(netcam);
return -1;
}
/* Now the connect call will return immediately. */
ret = connect(netcam->sock, ai->ai_addr, ai->ai_addrlen);
back_err = errno; /* Save the errno from connect */
freeaddrinfo(ai);
/* If the connect failed with anything except EINPROGRESS, error. */
if ((ret < 0) && (back_err != EINPROGRESS)) {
if (!err_flag)
MOTION_LOG(ERR, TYPE_NETCAM, SHOW_ERRNO
,_("connect() failed (%d)"), back_err);
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO,_("disconnecting netcam (4)"));
netcam_disconnect(netcam);
return -1;
}
/* Now we do a 'select' with timeout to wait for the connect. */
FD_ZERO(&fd_w);
FD_SET(netcam->sock, &fd_w);
selecttime.tv_sec = CONNECT_TIMEOUT;
selecttime.tv_usec = 0;
ret = select(FD_SETSIZE, NULL, &fd_w, NULL, &selecttime);
if (ret == 0) { /* 0 means timeout. */
if (!err_flag)
MOTION_LOG(ERR, TYPE_NETCAM, NO_ERRNO, _("timeout on connect()"));
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO,_("disconnecting netcam (2)"));
netcam_disconnect(netcam);
return -1;
}
/*
* A +ve value returned from the select (actually, it must be a
* '1' showing 1 fd's changed) shows the select has completed.
* Now we must check the return code from the select.
*/
len = sizeof(ret);
if (getsockopt(netcam->sock, SOL_SOCKET, SO_ERROR, &ret, &len) < 0) {
MOTION_LOG(ERR, TYPE_NETCAM, NO_ERRNO, _("getsockopt after connect"));
netcam_disconnect(netcam);
return -1;
}
/* If the return code is anything except 0, error on connect. */
if (ret) {
if (!err_flag)
MOTION_LOG(ERR, TYPE_NETCAM, SHOW_ERRNO, _("connect returned error"));
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO,_("disconnecting netcam (3)"));
netcam_disconnect(netcam);
return -1;
}
/* The socket info is stored in the rbuf structure of our context. */
rbuf_initialize(netcam);
return 0; /* Success */
}
void netcam_check_buffsize(netcam_buff_ptr buff, size_t numbytes)
{
int min_size_to_alloc;
int real_alloc;
int new_size;
if ((buff->size - buff->used) >= numbytes)
return;
min_size_to_alloc = numbytes - (buff->size - buff->used);
real_alloc = ((min_size_to_alloc / NETCAM_BUFFSIZE) * NETCAM_BUFFSIZE);
if ((min_size_to_alloc - real_alloc) > 0)
real_alloc += NETCAM_BUFFSIZE;
new_size = buff->size + real_alloc;
MOTION_LOG(DBG, TYPE_NETCAM, NO_ERRNO
,_("expanding buffer from [%d/%d] to [%d/%d] bytes.")
,(int) buff->used, (int) buff->size
,(int) buff->used, new_size);
buff->ptr = myrealloc(buff->ptr, new_size,
"netcam_check_buf_size");
buff->size = new_size;
}
/**
* Publish new image
*
* Moves the image in 'receiving' into 'latest' and updates last frame time
*/
void netcam_image_read_complete(netcam_context_ptr netcam)
{
struct timeval curtime;
netcam_buff *xchg;
if (gettimeofday(&curtime, NULL) < 0)
MOTION_LOG(WRN, TYPE_NETCAM, SHOW_ERRNO, "gettimeofday");
netcam->receiving->image_time = curtime;
/*
* Calculate our "running average" time for this netcam's
* frame transmissions (except for the first time).
* Note that the average frame time is held in microseconds.
*/
if (netcam->last_image.tv_sec) {
netcam->av_frame_time = ((9.0 * netcam->av_frame_time) + 1000000.0 *
(curtime.tv_sec - netcam->last_image.tv_sec) +
(curtime.tv_usec- netcam->last_image.tv_usec)) / 10.0;
/* The following floods the log. Comment out until it is needed. */
//MOTION_LOG(DBG, TYPE_NETCAM, NO_ERRNO, "Calculated frame time %f", netcam->av_frame_time);
}
netcam->last_image = curtime;
/*
* read is complete - set the current 'receiving' buffer atomically
* as 'latest', and make the buffer previously in 'latest' become
* the new 'receiving'.
*/
pthread_mutex_lock(&netcam->mutex);
xchg = netcam->latest;
netcam->latest = netcam->receiving;
netcam->receiving = xchg;
netcam->imgcnt++;
/*
* We have a new frame ready. We send a signal so that
* any thread (e.g. the motion main loop) waiting for the
* next frame to become available may proceed.
*/
pthread_cond_signal(&netcam->pic_ready);
pthread_mutex_unlock(&netcam->mutex);
}
/**
* netcam_read_html_jpeg
*
* This routine reads a jpeg image from the netcam. When it is called,
* the stream is already positioned just after the image header.
*
* This routine is called under the four variations of two different
* conditions:
* 1) Streaming or non-streaming camera
* Note: Keep-Alive is supported for non-streaming cameras,
* if enabled in the netcam's config structure.
* 2) Header does or does not include Content-Length
* Additionally, if it is a streaming camera, there must always be a
* boundary-string.
*
* The routine will (attempt to) read the JPEG image. If a Content-Length
* is present, it will be used (this will result in more efficient code, and
* also code which should be better at detecting and recovering from possible
* error conditions).
*
* If a boundary-string is present (and, if the camera is streaming, this
* *must* be the case), the routine will assure that it is recognized and
* acted upon.
*
* Our algorithm for this will be as follows:
* 1) If a Content-Length is present, set the variable "remaining"
* to be equal to that value, else set it to a "very large"
* number.
* WARNING !!! Content-Length *must* to be greater than 0, even more
* a jpeg image cannot be less than 300 bytes or so.
* 2) While there is more data available from the camera:
* a) If there is a "boundary string" specified (from the initial
* header):
* i) If the amount of data in the input buffer is less than
* the length of the boundary string, get more data into
* the input buffer (error if failure).
* ii) If the boundary string is found, check how many
* characters remain in the input buffer before the start
* of the boundary string. If that is less than the
* variable "remaining", reset "remaining" to be equal
* to that number.
* b) Try to copy up to "remaining" characters from the input
* buffer into our destination buffer.
* c) If there are no more characters available from the camera,
* exit this loop, else subtract the number of characters
* actually copied from the variable "remaining".
* 3) If Content-Length was present, and "remaining" is not equal
* to zero, generate a warning message for logging.
*
*
* Parameters:
* netcam Pointer to netcam context
*
*
* Returns: 0 for success, -1 for error
*
*/
static int netcam_read_html_jpeg(netcam_context_ptr netcam)
{
netcam_buff_ptr buffer;
size_t remaining; /* # characters to read */
size_t maxflush; /* # chars before boundary */
size_t rem, rlen, ix; /* Working vars */
int retval;
char *ptr, *bptr, *rptr;
/*
* Initialisation - set our local pointers to the context
* information.
*/
buffer = netcam->receiving;
/* Assure the target buffer is empty. */
buffer->used = 0;
/* Prepare for read loop. */
if (buffer->content_length != 0)
remaining = buffer->content_length;
else
remaining = 9999999;
/* Now read in the data. */
while (remaining) {
/* Assure data in input buffer. */
if (netcam->response->buffer_left <= 0) {
retval = rbuf_read_bufferful(netcam);
if (retval <= 0)
break;
netcam->response->buffer_left = retval;
netcam->response->buffer_pos = netcam->response->buffer;
}
/* If a boundary string is present, take it into account. */
bptr = netcam->boundary;
if (bptr) {
rptr = netcam->response->buffer_pos;
rlen = netcam->response->buffer_left;
/* Loop through buffer looking for start of boundary. */
while (1) {
/*
* Logic gets a little complicated here. The
* problem is that we are reading in input
* data in packets, and there is a (small)
* chance that the boundary string could be
* split across successive packets.
* First a quick check if the string *might*
* be in the current buffer.
*/
if (rlen > remaining)
rlen = remaining;
if (remaining < netcam->boundary_length)
break;
if ((ptr = memchr(rptr, *bptr, rlen)) == NULL)
/* Boundary not here (normal path) */
break;
/*
* At least the first char was found in the
* buffer - check for the rest.
*/
rem = rlen - (ptr - rptr);
for (ix = 1; (ix < rem) && (ix < netcam->boundary_length); ix++) {
if (ptr[ix] != bptr[ix])
break;
}
if ((ix != netcam->boundary_length) && (ix != rem)) {
/*
* Not pointing at a boundary string -
* step along input.
*/
ix = ptr - rptr + 1;
rptr += ix;
rlen -= ix;
if (rlen <= 0)
/* boundary not in buffer - go copy out */
break;
/*
* Not yet decided - continue
* through input.
*/
continue;
}
/*
* If we finish the 'for' with
* ix == boundary_length, that means we found
* the string, and should copy any data which
* precedes it into the target buffer, then
* exit the main loop.
*/
if (ix == netcam->boundary_length) {
if ((ptr - netcam->response->buffer) < (int) remaining)
remaining = ptr - netcam->response->buffer;
/* Go copy everything up to boundary. */
break;
}
/*
* If not, and ix == rem, that means we reached
* the end of the input buffer in the middle of
* our check, which is the (somewhat messy)
* problem mentioned above.
*
* Assure there is data before potential
* boundary string.
*/
if (ptr != netcam->response->buffer) {
/*
* We have a boundary string crossing
* packets :-(. We will copy all the
* data up to the beginning of the
* potential boundary, then re-position
* the (partial) string to the
* beginning and get some more input
* data. First we flush the input
* buffer up to the beginning of the
* (potential) boundary string.
*/
ix = ptr - netcam->response->buffer_pos;
netcam_check_buffsize(buffer, ix);
retval = rbuf_flush(netcam, buffer->ptr + buffer->used, ix);
buffer->used += retval;
remaining -= retval;
/*
* Now move the boundary fragment to
* the head of the input buffer.
* This is really a "hack" - ideally,
* we should have a function within the
* module netcam_wget.c to do this job!
*/
MOTION_LOG(DBG, TYPE_NETCAM, NO_ERRNO
,_("Potential split boundary - "
"%d chars flushed, %d re-positioned")
, ix, (int) netcam->response->buffer_left);
memmove(netcam->response->buffer, ptr,
netcam->response->buffer_left);
} /* End of boundary split over buffer. */
retval = netcam_recv(netcam, netcam->response->buffer +
netcam->response->buffer_left,
sizeof(netcam->response->buffer) -
netcam->response->buffer_left);
if (retval <= 0) { /* This is a fatal error. */
MOTION_LOG(ERR, TYPE_NETCAM, SHOW_ERRNO
,_("recv() fail after boundary string"));
return -1;
}
/* Reset the input buffer pointers. */
netcam->response->buffer_left = retval + netcam->response->buffer_left;
netcam->response->buffer_pos = netcam->response->buffer;
/* This will cause a 'continue' of the main loop. */
bptr = NULL;
/* Return to do the boundary compare from the start. */
break;
} /* End of while(1) input buffer search. */
/* !bptr shows we're processing split boundary. */
if (!bptr)
continue;
} /* end of if (bptr) */
/* boundary string not present, so just write out as much data as possible. */
if (remaining) {
maxflush = MINVAL(netcam->response->buffer_left, remaining);
netcam_check_buffsize(buffer, maxflush);
retval = rbuf_flush(netcam, buffer->ptr + buffer->used, maxflush);
buffer->used += retval;
remaining -= retval;
}
}
/* Fix starting of JPEG if needed , some cameras introduce thrash before
* SOI 0xFFD8 Start Of Image
*/
netcam_fix_jpeg_header(netcam);
netcam_image_read_complete(netcam);
if (netcam->caps.streaming == NCS_UNSUPPORTED) {
if (!netcam->connect_keepalive) {
MOTION_LOG(NTC, TYPE_NETCAM, NO_ERRNO
,_("disconnecting netcam since keep-alive not set."));
netcam_disconnect(netcam);
return 0;
}
MOTION_LOG(NTC, TYPE_NETCAM, NO_ERRNO, _("leaving netcam connected."));
}
return 0;
}
/**
* netcam_http_request
*
* This routine initiates a connection on the specified netcam,
* for which every parameter has already been set (url, etc).
* It uses the HTTP protocol, which is what many IP cameras use.
* If this function succeeds, the HTTP response along with the
* headers are already processed, and you can start reading contents
* from here.
*
* Parameters:
* netcam Pointer to a netcam_context structure
*
* Returns: 0 on success, -1 if an error occurs.
*/
static int netcam_http_request(netcam_context_ptr netcam)
{
int ix;
/*
* Our basic initialisation has been completed. Now we will attempt
* to connect with the camera so that we can then get a "header"
* in order to find out what kind of camera we are dealing with,
* as well as what are the picture dimensions. Note that for
* this initial connection, any failure will cause an error
* return from netcam_start (unlike later possible attempts at
* re-connecting, if the network connection is later interrupted).
*/
for (ix = 0; ix < MAX_HEADER_RETRIES; ix++) {
/*
* netcam_connect does an automatic netcam_close, so it's
* safe to include it as part of this loop
* (Not always true now Keep-Alive is implemented).
*/
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO
,_("about to try to connect, time #%d"), ix);
if (netcam_connect(netcam, 0) != 0) {
MOTION_LOG(ERR, TYPE_NETCAM, NO_ERRNO
,_("Failed to open camera - check your config and that netcamera is online"));
/* Fatal error on startup */
ix = MAX_HEADER_RETRIES;
break;;
}
if (netcam_read_first_header(netcam) >= 0)
break;
MOTION_LOG(ERR, TYPE_NETCAM, NO_ERRNO,_("Error reading first header - re-trying"));
}
if (ix == MAX_HEADER_RETRIES) {
MOTION_LOG(ERR, TYPE_NETCAM, NO_ERRNO
,_("Failed to read first camera header - giving up for now"));
return -1;
}
return 0;
}
/**
* netcam_http_build_url
*
* This routing takes care of the url-processing part of the http protocol.
* This includes url scheme and parsing, proxy handling, http-authentication
* preparation, response buffer allocation and so on. At the end of this
* routine, we are ready to call netcam_http_request().
*
* Parameters:
* netcam Pointer to a netcam_context structure
* url Pointer to a netcam url structure
*
* Returns: 0 on success,
* or -1 if an fatal error occurs.
*/
static int netcam_http_build_url(netcam_context_ptr netcam, struct url_t *url)
{
struct context *cnt = netcam->cnt;
const char *ptr; /* Working var */
char *userpass; /* Temp pointer to config value */
char *encuserpass; /* Temp storage for encoded ver */
char *request_pass = NULL; /* Temp storage for base64 conv */
int ix;
/* First the http context structure. */
netcam->response = mymalloc(sizeof(struct rbuf));
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO
,_("Netcam has flags:"
" HTTP/1.0: %s HTTP/1.1: %s Keep-Alive %s.")
,netcam->connect_http_10 ? "1":"0", netcam->connect_http_11 ? "1":"0"
,netcam->connect_keepalive ? "ON":"OFF");
/*
* The network camera may require a username and password. If
* so, the information can come from two different places in the
* motion configuration file. Either it can be present in
* the netcam_userpass, or it can be present as a part of the URL
* for the camera. We assume the first of these has a higher
* relevance.
*/
if (cnt->conf.netcam_userpass)
ptr = cnt->conf.netcam_userpass;
else
ptr = url->userpass;
/* motion_base64_encode needs up to 3 additional chars. */
if (ptr) {
userpass = mymalloc(strlen(ptr) + 3);
strcpy(userpass, ptr);
} else {
userpass = NULL;
}
/*
* Now we want to create the actual string which will be used to
* connect to the camera. It may or may not contain a username /
* password. We first compose a basic connect message, then check
* if a Keep-Alive header is to be included (or just 'close'), then
* whether a username / password is required and, if so, just
* concatenate it with the request.
*
*/
/* Space for final \r\n plus string terminator. */
ix = 3;
/* See if username / password is required. */
if (userpass) { /* If either of the above are non-NULL. */
/* Allocate space for the base64-encoded string. */
encuserpass = mymalloc(BASE64_LENGTH(strlen(userpass)) + 1);
/* Fill in the value. */
motion_base64_encode(userpass, encuserpass, strlen(userpass));
/* Now create the last part (authorization) of the request. */
request_pass = mymalloc(strlen(connect_auth_req) +
strlen(encuserpass) + 1);
ix += sprintf(request_pass, connect_auth_req, encuserpass);
/* Free the working variables. */
free(encuserpass);
}
/*
* We are now ready to set up the netcam's "connect request". Most of
* this comes from the (preset) string 'connect_req', but additional
* characters are required if there is a proxy server, or if there is
* a Keep-Alive connection rather than a close connection, or
* a username / password for the camera. The variable 'ix' currently
* has the number of characters required for username/password (which
* could be zero) and for the \r\n and string terminator. We will also
* always need space for the netcam path, and if a proxy is being used
* we also need space for a preceding 'http://{hostname}' for the
* netcam path.
* Note: Keep-Alive (but not HTTP 1.1) is disabled if a proxy URL
* is set, since HTTP 1.0 Keep-alive cannot be transferred through.
*/
if (cnt->conf.netcam_proxy) {
/*
* Allocate space for a working string to contain the path.
* The extra 4 is for "://" and string terminator.
*/
if (url->port != 0) {
ptr = mymalloc(strlen(url->service) + strlen(url->host) + 7 + strlen(url->path) + 4);
sprintf((char *)ptr, "http://%s:%d%s", url->host, url->port , url->path);
}else {
ptr = mymalloc(strlen(url->service) + strlen(url->host) + strlen(url->path) + 4);
sprintf((char *)ptr, "http://%s%s", url->host, url->path);
}
netcam->connect_keepalive = FALSE; /* Disable Keepalive if proxy */
free((void *)netcam->cnt->conf.netcam_keepalive);
netcam->cnt->conf.netcam_keepalive = strdup("off");
MOTION_LOG(NTC, TYPE_NETCAM, NO_ERRNO
,_("Removed netcam_keepalive flag due to proxy set."
"Proxy is incompatible with Keep-Alive."));
} else {
/* If no proxy, set as netcam_url path. */
ptr = url->path;
/*
* After generating the connect message the string
* will be freed, so we don't want netcam_url_free
* to free it as well.
*/
url->path = NULL;
}
ix += strlen(ptr);
/*
* Now add the required number of characters for the close header
* or Keep-Alive header. We test the flag which can be unset if
* there is a problem (rather than the flag in the conf structure
* which is read-only.
*/
if (netcam->connect_keepalive)
ix += strlen(connect_req_keepalive);
else
ix += strlen(connect_req_close);
/*
* Point to either the HTTP 1.0 or 1.1 request header set
* If the configuration is anything other than 1.1, use 1.0
* as a default. This avoids a chance of being left with none.
*/
if (netcam->connect_http_11 == TRUE)
connect_req = connect_req_http11;
else
connect_req = connect_req_http10;
/*
* Now that we know how much space we need, we can allocate space
* for the connect-request string.
*/
netcam->connect_request = mymalloc(strlen(connect_req) + ix +
strlen(netcam->connect_host));
/* Now create the request string with an sprintf. */
sprintf(netcam->connect_request, connect_req, ptr,
netcam->connect_host);
if (netcam->connect_keepalive)
strcat(netcam->connect_request, connect_req_keepalive);
else
strcat(netcam->connect_request, connect_req_close);
if (userpass) {
strcat(netcam->connect_request, request_pass);
free(request_pass);
free(userpass);
}
/* Put on the final CRLF onto the request. */
strcat(netcam->connect_request, "\r\n");
free((void *)ptr);
netcam_url_free(url); /* Cleanup the url data. */
/* Note that log messages are commented out to avoid leaking info related
* to user/host/pass etc. Keeing them in the code for easier debugging if
* it is needed
*/
//MOTION_LOG(INF , TYPE_NETCAM, NO_ERRNO, "Camera connect"
// " string is ''%s'' End of camera connect string.",
// netcam->connect_request);
return 0;
}
/**
* netcam_setup_html
* This function will parse the netcam url, connect to the camera,
* set its type to jpeg-based, detect multipart and keep-alive,
* and the get_image method accordingly. The cam can be non-streaming
* or multipart-streaming.
*
* Parameters
*
* netcam Pointer to the netcam_context for the camera
* url Pointer to the url of the camera
*
* Returns: 0 on success (camera link ok) or -1 if an error occurred.
*
*/
int netcam_setup_html(netcam_context_ptr netcam, struct url_t *url)
{
netcam->timeout.tv_sec = READ_TIMEOUT;
/*
* This netcam is http-based, so build the required URL and
* structures, like the connection-string and so on.
*/
if (netcam_http_build_url(netcam, url) < 0)
return -1;
/*
* Then we will send our http request and get headers.
*/
if (netcam_http_request(netcam) < 0)
return -1;
/*
* If this is a streaming camera, we need to position just
* past the boundary string and read the image header.
*/
if (netcam->caps.streaming == NCS_MULTIPART) {
if (netcam_read_next_header(netcam) < 0) {
MOTION_LOG(ERR, TYPE_NETCAM, NO_ERRNO
,_("Failed to read first stream header - giving up for now"));
return -1;
}
}
MOTION_LOG(NTC, TYPE_NETCAM, NO_ERRNO
,_("connected, going on to read image."));
netcam->get_image = netcam_read_html_jpeg;
return 0;
}
/**
* netcam_mjpg_buffer_refill
*
* This routing reads content from the MJPG-camera until the response
* buffer of the specified netcam_context is full. If the connection is
* lost during this operation, it tries to re-connect.
*
* Parameters:
* netcam Pointer to a netcam_context structure
*
* Returns: The number of read bytes,
* or -1 if an fatal connection error occurs.
*/
static int netcam_mjpg_buffer_refill(netcam_context_ptr netcam)
{
int retval;
if (netcam->response->buffer_left > 0)
return netcam->response->buffer_left;
while (1) {
retval = rbuf_read_bufferful(netcam);
if (retval <= 0) { /* If we got 0, we timeoutted. */
MOTION_LOG(ALR, TYPE_NETCAM, NO_ERRNO
,_("Read error, trying to reconnect.."));
/* We may have lost the connexion */
if (netcam_http_request(netcam) < 0) {
MOTION_LOG(CRT, TYPE_NETCAM, NO_ERRNO
,_("lost the cam."));
return -1; /* We REALLY lost the cam... bail out for now. */
}
}
if (retval > 0)
break;
}
netcam->response->buffer_left = retval;
netcam->response->buffer_pos = netcam->response->buffer;
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO
,_("Refilled buffer with [%d] bytes from the network."), retval);
return retval;
}
/**
* netcam_read_mjpg_jpeg
*
* This routine reads from a netcam using a MJPG-chunk based
* protocol, used by Linksys WVC200 for example.
* This implementation has been made by reverse-engineering
* the protocol, so it may contain bugs and should be considered as
* experimental.
*
* Protocol explanation:
*
* The stream consists of JPG pictures, spanned across multiple
* MJPG chunks (in general 3 chunks, altough that's not guaranteed).
*
* Each data chunk can range from 1 to 65535 bytes + a header, altough
* i have not seen anything bigger than 20000 bytes + a header.
*
* One MJPG chunk is constituted by a header plus the chunk data.
* The chunk header is of fixed size, and the following data size
* and position in the frame is specified in the chunk header.
*
* From what i have seen on WVC200 cameras, the stream always begins
* on JPG frame boundary, so you don't have to worry about beginning
* in the middle of a frame.
*
* See netcam.h for the mjpg_header structure and more details.
*
* Parameters:
* netcam Pointer to a netcam_context structure
*
* Returns: 0 if an image was obtained from the camera,
* or -1 if an error occurred.
*/
static int netcam_read_mjpg_jpeg(netcam_context_ptr netcam)
{
netcam_buff_ptr buffer;
mjpg_header mh;
size_t read_bytes;
int retval;
/*
* Initialisation - set our local pointers to the context
* information.
*/
buffer = netcam->receiving;
/* Assure the target buffer is empty. */
buffer->used = 0;
if (netcam_mjpg_buffer_refill(netcam) < 0)
return -1;
/* Loop until we have a complete JPG. */
while (1) {
read_bytes = 0;
while (read_bytes < sizeof(mh)) {
/* Transfer what we have in buffer in the header structure. */
retval = rbuf_flush(netcam, ((char *)&mh) + read_bytes, sizeof(mh) - read_bytes);
read_bytes += retval;
MOTION_LOG(DBG, TYPE_NETCAM, NO_ERRNO
,_("Read [%d/%d] header bytes."), read_bytes, sizeof(mh));
/* If we don't have received a full header, refill our buffer. */
if (read_bytes < sizeof(mh)) {
if (netcam_mjpg_buffer_refill(netcam) < 0)
return -1;
}
}
/* Now check the validity of our header. */
if (strncmp(mh.mh_magic, MJPG_MH_MAGIC, MJPG_MH_MAGIC_SIZE)) {
MOTION_LOG(WRN, TYPE_NETCAM, NO_ERRNO
,_("Invalid header received, reconnecting"));
/*
* We shall reconnect to restart the stream, and get a chance
* to resync.
*/
if (netcam_http_request(netcam) < 0)
return -1; /* We lost the cam... bail out. */
/* Even there, we need to resync. */
buffer->used = 0;
continue ;
}
/* Make room for the chunk. */
netcam_check_buffsize(buffer, (int) mh.mh_chunksize);
read_bytes = 0;
while (read_bytes < mh.mh_chunksize) {
retval = rbuf_flush(netcam, buffer->ptr + buffer->used + read_bytes,
mh.mh_chunksize - read_bytes);
read_bytes += retval;
MOTION_LOG(DBG, TYPE_NETCAM, NO_ERRNO
,_("Read [%d/%d] chunk bytes, [%d/%d] total")
,read_bytes, mh.mh_chunksize
,buffer->used + read_bytes, mh.mh_framesize);
if (retval < (int) (mh.mh_chunksize - read_bytes)) {
/* MOTION_LOG(EMG, TYPE_NETCAM, NO_ERRNO, "Chunk incomplete, going to refill."); */
if (netcam_mjpg_buffer_refill(netcam) < 0)
return -1;
}
}
buffer->used += read_bytes;
MOTION_LOG(DBG, TYPE_NETCAM, NO_ERRNO
,_("Chunk complete, buffer used [%d] bytes."), buffer->used);
/* Is our JPG image complete ? */
if (mh.mh_framesize == buffer->used) {
MOTION_LOG(DBG, TYPE_NETCAM, NO_ERRNO
,_("Image complete, buffer used [%d] bytes."), buffer->used);
break;
}
/* MOTION_LOG(DBG, TYPE_NETCAM, NO_ERRNO, "Rlen now at [%d] bytes", rlen); */
}
netcam_image_read_complete(netcam);
return 0;
}
/**
* netcam_setup_mjpg
* This function will parse the netcam url, connect to the camera,
* set its type to MJPG-Streaming, and the get_image method accordingly.
*
* Parameters
*
* netcam Pointer to the netcam_context for the camera
* url Pointer to the url of the camera
*
* Returns: 0 on success (camera link ok) or -1 if an error occurred.
*
*/
int netcam_setup_mjpg(netcam_context_ptr netcam, struct url_t *url)
{
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO,_("now calling netcam_setup_mjpg()"));
netcam->timeout.tv_sec = READ_TIMEOUT;
strcpy(url->service, "http"); /* Put back a real URL service. */
/*
* This netcam is http-based, so build the required URL and
* structures, like the connection-string and so on.
*/
if (netcam_http_build_url(netcam, url) != 0)
return -1;
/* Then we will send our http request and get headers. */
if (netcam_http_request(netcam) < 0)
return -1;
/* We have a special type of streaming camera. */
netcam->caps.streaming = NCS_BLOCK;
/*
* We are positionned right just at the start of the first MJPG
* header, so don't move anymore, initialization complete.
*/
MOTION_LOG(NTC, TYPE_NETCAM, NO_ERRNO
,_("connected, going on to read and decode MJPG chunks."));
netcam->get_image = netcam_read_mjpg_jpeg;
return 0;
}
/**
* netcam_read_file_jpeg
*
* This routine reads local image jpeg. ( netcam_url jpeg:///path/image.jpg )
* The current implementation is still a little experimental,
* and needs some additional code for error detection and
* recovery.
*/
static int netcam_read_file_jpeg(netcam_context_ptr netcam)
{
int loop_counter = 0;
MOTION_LOG(DBG, TYPE_NETCAM, NO_ERRNO,_("Begin"));
netcam_buff_ptr buffer;
int len;
struct stat statbuf;
/* Point to our working buffer. */
buffer = netcam->receiving;
buffer->used = 0;
/*int fstat(int filedes, struct stat *buf);*/
do {
if (stat(netcam->file->path, &statbuf)) {
MOTION_LOG(CRT, TYPE_NETCAM, SHOW_ERRNO
,_("stat(%s) error"), netcam->file->path);
return -1;
}
MOTION_LOG(DBG, TYPE_NETCAM, NO_ERRNO
,_("statbuf.st_mtime[%d] != last_st_mtime[%d]")
, statbuf.st_mtime, netcam->file->last_st_mtime);
/* its waits POLLING_TIMEOUT */
if (loop_counter>((POLLING_TIMEOUT*1000*1000)/(POLLING_TIME/1000))) {
MOTION_LOG(CRT, TYPE_NETCAM, NO_ERRNO
,_("waiting new file image timeout"));
return -1;
}
MOTION_LOG(DBG, TYPE_NETCAM, NO_ERRNO
,_("delay waiting new file image "));
//its waits 5seconds - READ_TIMEOUT
//SLEEP(netcam->timeout.tv_sec, netcam->timeout.tv_usec*1000);
SLEEP(0, POLLING_TIME); // its waits 500ms
/*return -1;*/
loop_counter++;
} while (statbuf.st_mtime == netcam->file->last_st_mtime);
netcam->file->last_st_mtime = statbuf.st_mtime;
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO
,_("processing new file image - st_mtime %d"), netcam->file->last_st_mtime);
/* Assure there's enough room in the buffer. */
while (buffer->size < (size_t)statbuf.st_size)
netcam_check_buffsize(buffer, statbuf.st_size);
/* Do the read */
netcam->file->control_file_desc = open(netcam->file->path, O_RDONLY|O_CLOEXEC);
if (netcam->file->control_file_desc < 0) {
MOTION_LOG(CRT, TYPE_NETCAM, NO_ERRNO
,_("open(%s) error: %d")
,netcam->file->path, netcam->file->control_file_desc);
return -1;
}
if ((len = read(netcam->file->control_file_desc,
buffer->ptr + buffer->used, statbuf.st_size)) < 0) {
MOTION_LOG(CRT, TYPE_NETCAM, NO_ERRNO
,_("read(%s) error: %d"), netcam->file->control_file_desc, len);
return -1;
}
buffer->used += len;
close(netcam->file->control_file_desc);
netcam_image_read_complete(netcam);
MOTION_LOG(DBG, TYPE_NETCAM, NO_ERRNO,_("End"));
return 0;
}
tfile_context *file_new_context(void)
{
/* Note that mymalloc will exit on any problem. */
return mymalloc(sizeof(tfile_context));
}
void file_free_context(tfile_context* ctxt)
{
if (ctxt == NULL)
return;
free(ctxt->path);
free(ctxt);
}
int netcam_setup_file(netcam_context_ptr netcam, struct url_t *url)
{
if ((netcam->file = file_new_context()) == NULL)
return -1;
/*
* We copy the strings out of the url structure into the ftp_context
* structure. By setting url->{string} to NULL we effectively "take
* ownership" of the string away from the URL (i.e. it won't be freed
* when we cleanup the url structure later).
*/
netcam->file->path = url->path;
url->path = NULL;
MOTION_LOG(INF, TYPE_NETCAM, NO_ERRNO
,_("netcam->file->path %s"), netcam->file->path);
netcam->get_image = netcam_read_file_jpeg;
return 0;
}
/**
* netcam_recv
*
* This routine receives the next block from the netcam. It takes care
* of the potential timeouts and interrupt which may occur because of
* the settings from setsockopt.
*
* Parameters:
*
* netcam Pointer to a netcam context
* buffptr Pointer to the receive buffer
* buffsize Length of the buffer
*
* Returns:
* If successful, the length of the message received, otherwise the
* error reply from the system call.
*
*/
ssize_t netcam_recv(netcam_context_ptr netcam, void *buffptr, size_t buffsize)
{
ssize_t retval;
fd_set fd_r;
struct timeval selecttime;
if (netcam->sock < 0)
return -1; /* We are not connected, it's impossible to receive data. */
FD_ZERO(&fd_r);
FD_SET(netcam->sock, &fd_r);
selecttime = netcam->timeout;
retval = select(FD_SETSIZE, &fd_r, NULL, NULL, &selecttime);
if (retval == 0) /* 0 means timeout */
return -1;
return recv(netcam->sock, buffptr, buffsize, 0);
}
Reference in New Issue View Git Blame Copy Permalink