[NO NEW TESTS NEEDED]
Support better compatibility output for podman system commands
* Format and content of output from podman version changed to
be more compatible
See #10974
Depends on containers/common#831
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Leverage new report.Formatter allowing better compatibility from
podman command output.
Follow on PR's will cover containers, etc.
See #10974
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Add a new flag to set the start timeout for a generated systemd unit.
To make naming consistent, add a new --stop-timeout flag as well and let
the previous --time map to it.
Fixes: #11618
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
There are at least two runtimes that support checkpoint and restore:
runc and crun. Although the checkpoints created by these are almost
compatible, it is not (yet) possible to restore a checkpoint created
with one runtime with the other runtime. To make checkpoint/restore
usage more comfortable this adds code to look into the checkpoint
archive during restore and to set the runtime to the one used during
checkpointing.
This also adds a check, if the user explicitly sets a runtime during
restore, that the runtime is also the same as used during checkpointing.
If a different runtime is selected than the one used during
checkpointing the restore will fail early.
If runc and crun will create compatible checkpoints in the future the
check can be changed to treat crun and runc as compatible
checkpoint/restore runtimes.
Signed-off-by: Adrian Reber <areber@redhat.com>
Podman logs was defined twice, once for container logs and once for pod
logs. This causes problems with the shell completion. Also podman --help
showed this command twice.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
CRIU supports checkpoint/restore of file locks. This feature is
required to checkpoint/restore containers running applications
such as MySQL.
Signed-off-by: Radostin Stoyanov <radostin@redhat.com>
Nothing was working before, and it's too much to summarize. To make
sure we're not regressing in the future again, enable the remote e2e
tests.
Fixes: #12007
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Podman adds a few environment variables by default, and
currently there is no way to get rid of them from your container.
This option will allow you to specify which defaults you don't
want.
--unsetenv-all will remove all default environment variables.
Default environment variables can come from podman builtin,
containers.conf or from the container image.
Fixes: https://github.com/containers/podman/issues/11836
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This adds the parameter '--print-stats' to 'podman container restore'.
With '--print-stats' Podman will measure how long Podman itself, the OCI
runtime and CRIU requires to restore a checkpoint and print out these
information. CRIU already creates process restore statistics which are
just read in addition to the added measurements. In contrast to just
printing out the ID of the restored container, Podman will now print
out JSON:
# podman container restore --latest --print-stats
{
"podman_restore_duration": 305871,
"container_statistics": [
{
"Id": "47b02e1d474b5d5fe917825e91ac653efa757c91e5a81a368d771a78f6b5ed20",
"runtime_restore_duration": 140614,
"criu_statistics": {
"forking_time": 5,
"restore_time": 67672,
"pages_restored": 14
}
}
]
}
The output contains 'podman_restore_duration' which contains the
number of microseconds Podman required to restore the checkpoint. The
output also includes 'runtime_restore_duration' which is the time
the runtime needed to restore that specific container. Each container
also includes 'criu_statistics' which displays the timing information
collected by CRIU.
Signed-off-by: Adrian Reber <areber@redhat.com>
This adds the parameter '--print-stats' to 'podman container checkpoint'.
With '--print-stats' Podman will measure how long Podman itself, the OCI
runtime and CRIU requires to create a checkpoint and print out these
information. CRIU already creates checkpointing statistics which are
just read in addition to the added measurements. In contrast to just
printing out the ID of the checkpointed container, Podman will now print
out JSON:
# podman container checkpoint --latest --print-stats
{
"podman_checkpoint_duration": 360749,
"container_statistics": [
{
"Id": "25244244bf2efbef30fb6857ddea8cb2e5489f07eb6659e20dda117f0c466808",
"runtime_checkpoint_duration": 177222,
"criu_statistics": {
"freezing_time": 100657,
"frozen_time": 60700,
"memdump_time": 8162,
"memwrite_time": 4224,
"pages_scanned": 20561,
"pages_written": 2129
}
}
]
}
The output contains 'podman_checkpoint_duration' which contains the
number of microseconds Podman required to create the checkpoint. The
output also includes 'runtime_checkpoint_duration' which is the time
the runtime needed to checkpoint that specific container. Each container
also includes 'criu_statistics' which displays the timing information
collected by CRIU.
Signed-off-by: Adrian Reber <areber@redhat.com>
'--memory-swappiness=0' used to work. This patch fixes the regression
issue, which was caused by the change of infra container creation
process.
Signed-off-by: Hironori Shiina <shiina.hironori@jp.fujitsu.com>
Fixed syntax so that podman image scp transfer works with no user specified.
This command can only be executed as root so to obtain the default user, I searched for
the SUDO_USER environmental variable. If that is not found, we error out and inform the user
to set this variable and make sure they are running as root
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
To make testing easier we can overwrite the network backend with the
global `--network-backend` option.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Print out the headers even if the system connection list
is empty to match the behavior of other list commands.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Support downloading files, for instance via
`podman load -i server.com/image.tar`. The specified URL is downloaded
in the frontend and stored as a temp file that gets passed down to the
backend.
Also vendor in c/common@main to use the new `pkg/download`.
Fixes: #11970
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Fix a bug where pods would be created with the hard-coded default infra
image instead of the custom one from containers.conf. Add a simple
regression test.
Fixes: #12245
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When we create a pod we have to parse the network mode form the config
file. This is a regression in commit d28e85741f.
Fixes#12207
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Added functionality for users to transfer images from root storage to rootless storage without using sshd. This is
done through rootful podman by running `sudo podman image scp root@localhost::image user@localhost:: the user is needed
in order to find and use their uid/gid to exec a new process.
added necessary tests, and functions for this implementation. Created new image function Transfer so that
the underlying code is majorly removed from CLI
Signed-off-by: cdoern <cdoern@redhat.com>
Since we want to use the rootless cni ns also for netavark we should
pick a more generic name. The name is now "rootless network namespace"
or short "rootless netns".
The rename might cause some issues after the update but when the
all containers are restarted or the host is rebooted it should work
correctly.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
