The initial version of the new port code mistakenly restricted
this, so un-restrict it. We still need to maintain the map of
container ports, unfortunately (need to verify if the port in
question is a duplicate, for example).
Fixes#7062
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We should default to the user name unmount rather then the internal
name of umount.
Also User namespace was not being handled correctly. We want to inform
the user that if they do a mount when in rootless mode that they have
to be first in the podman unshare state.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The v2.0 reference [page](http://docs.podman.io/en/latest/Reference.html)
lists the API as experimental. Removed that word and reworked the first
paragraph a bit based on verbiage that @mheon put together for the
API intro blog.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Currently you can not apply an ApparmorProfile if you specify
--privileged. This patch will allow both to be specified
simultaniosly.
By default Apparmor should be disabled if the user
specifies --privileged, but if the user specifies --security apparmor:PROFILE,
with --privileged, we should do both.
Added e2e run_apparmor_test.go
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
--umask sets the umask inside the container
Defaults to 0022
Co-authored-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Ashley Cui <acui@redhat.com>
The versions Docker that the compat endpoints currently support are
using another type for the `filters` parameter than later versions
of Docker, which the libpod/events endpoint is also using.
To prevent existing deplopyments from breaking while still achieving
backward compat, we now support both types for the filters parameter.
Tested manually.
Fixes: #6899
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Fix a potential panic in the events endpoint when parsing the filters
parameter. Values of the filters map might be empty, so we need to
account for that instead of uncondtitionally accessing the first item.
Also apply a similar for race conditions as done in commit f4a2d25c0f:
Fix a race that could cause read errors to be masked. Masking
such errors is likely to report red herrings since users don't
see that reading failed for some reasons but that a given event
could not be found.
Another race was the handler closing event channel, which could lead to
two kinds of panics: double close, send to close channel. The backend
takes care of that. However, make sure that the backend stops working
in case the context has been cancelled.
Fixes: #6899
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When an image has no name/tag system df will
error because it tries to parse an empty name.
This commit makes sure we only parse non
empty names and set the repository and tag
to "<none>" otherwise.
Closes#7015
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
This matches Docker behavior, and will make the Docker frontend
work with `podman system service` (Docker tries to create, then
if that fails with 404 sends a request to pull the image).
Fixes#6960
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Podman is committed to inclusivity, a core value of open source. Historically, there have been technology terms that are problematic and divisive, and should be changed. We are currently taking time to audit our repository in order to eliminate such terminology, and replace it with more inclusive terms. We are starting where we can, with our own code, comments, and documentation. However, such terms may be used in dependencies, and must be used in our repositories at the current moment for compatibility. Podman will change these terms in our repo as soon as new and better terminology is available to us via our dependencies.
For more information: https://www.redhat.com/en/blog/making-open-source-more-inclusive-eradicating-problematic-language?sc_cid=701600000011gf0AAA
Signed-off-by: Ashley Cui <acui@redhat.com>
When creating a pod or container where a static MAC or IP address is provided, we should return a proper error and exit as 125.
Fixes: #6972
Signed-off-by: Brent Baude <bbaude@redhat.com>
As of podman 1.8.0, because of commit da7595a, the default approach of providing
port-forwarding in rootless mode has switched (and been hard-coded) to rootlessport,
for the purpose of providing super performance. The side-effect of this switch is
source within the container to the port-forwarded service always appears to originate
from 127.0.0.1 (see issue #5138).
This commit allows a user to specify if they want to revert to the previous approach
of leveraging slirp4netns add_hostfwd() api which, although not as stellar performance,
restores usefulness of seeing incoming traffic origin IP addresses.
The change should be transparent; when not specified, rootlessport will continue to be
used, however if specifying --net slirp4netns:slirplisten the old approach will be used.
Note: the above may imply the restored port-forwarding via slirp4netns is not as
performant as the new rootlessport approach, however the figures shared in the original
commit that introduced rootlessport are as follows:
slirp4netns: 8.3 Gbps,
RootlessKit: 27.3 Gbps,
which are more than sufficient for many use cases where the origin of traffic is more
important than limits that cannot be reached due to bottlenecks elsewhere.
Signed-off-by: Aleks Mariusz <m.k@alek.cx>
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This change prevents this exception when loading a pod spec
using the "IfNotPresent" pull policy:
Error: invalid pull type "IfNotPresent"
Signed-off-by: Tristan Cacqueray <tdecacqu@redhat.com>
We were only using the Command field in specgen when determining
whether to enable systemd if systemd=true (the default) was used.
This does not include the entrypoint, and does not include any
entrypoint/command sourced from the image - so an image could be
running systemd and we'd not correctly detect this. Using the
full, final command resolves this and matches Podman v1.9.x
behavior.
Fixes#6920
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
I confused STDIN and STDOUT's file descriptors (it's 0 and 1, I
thought they were 1 and 0). As such, we were looking at whether
we wanted to print STDIN when we looked to print STDOUT. This
bool was set when `-i` was set in at the `podman exec` command
line, which masked the problem when it was set.
Fixes#6890Fixes#6891Fixes#6892
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Currently we are sending over pids-limits from the user even if they
never modified the defaults. The pids limit should be set at the server
side unless modified by the user.
This issue has led to failures on systems that were running with cgroups V1.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
In `podman inspect` output for containers and pods, we include
the command that was used to create the container. This is also
used by `podman generate systemd --new` to generate unit files.
With remote podman, the generated create commands were incorrect
since we sourced directly from os.Args on the server side, which
was guaranteed to be `podman system service` (or some variant
thereof). The solution is to pass the command along in the
Specgen or PodSpecgen, where we can source it from the client's
os.Args.
This will still be VERY iffy for mixed local/remote use (doing a
`podman --remote run ...` on a remote client then a
`podman generate systemd --new` on the server on the same
container will not work, because the `--remote` flag will slip
in) but at the very least the output of `podman inspect` will be
correct. We can look into properly handling `--remote` (parsing
it out would be a little iffy) in a future PR.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This patch fixes connection counters for v2 endpoints
Idletracker was moved to a new package to prevent package cycle.
Hijacking code still remains in wrong place and should be moved
later to isolated package
Signed-off-by: Sami Korhonen <skorhone@gmail.com>
After this patch v2 hijacking endpoints, exec/start and
containers/attach follow rfc 7230 specification.
Connection will only be upgraded, if client specifies upgrade
headers:
For tcp connections:
Connection: Upgrade
Upgrade: tcp
For unix socket connections:
Connection: Upgrade
Upgrade: sock
There are currently no checks if upgrade type actually matches with
available protocols. Implementation just protocol that client
requested
Signed-off-by: Sami Korhonen <skorhone@gmail.com>
StateHijacked is a terminal state. If hijacked connection
is registered as an active connection, connection will
never be unregistered. This causes two issues
First issue is that active connection counters are off.
Second issue is a resource leak caused by connection
object that is stored to a map.
After this patch hijacked connections are no longer
visible in counters. If a counter for hijacked
connections is required, podman must track
connections returned by Hijacker.Hijack()
It might make sense to develop abstraction layer for
hijacking - and move all hijacking related code to a
separate package. Hijacking code is prone to resource
leaks and it should be thoroughly tested.
Signed-off-by: Sami Korhonen <skorhone@gmail.com>
