Merge pull request #328 from mkinney/master

add nano_g1
2025-12-26 01:17:51 -05:00 · 2022-04-27 11:35:44 -07:00 · 2022-04-27 11:29:05 -07:00 · 2022-04-27 12:33:09 +00:00 · 2022-04-27 07:21:56 -05:00 · 2022-04-27 07:19:08 -05:00
8 changed files with 203 additions and 24 deletions
--- a/info/mac/nano_g1.txt
+++ b/info/mac/nano_g1.txt
@@ -0,0 +1,30 @@
+meshtastic detected port: /dev/cu.wchusbserial53820208781
+
+ioreg -p IOUSB
+
+shows this:
+
+| +-o USB Single Serial@14300000  <class AppleUSBDevice, id 0x1000407a5, registered, matched, active, busy 0 (18 ms), retain 14>
+
+
+
+
+system_profiler SPUSBDataType > /tmp/a
+	with device plugged in
+
+system_profiler SPUSBDataType > /tmp/b
+	with device not plugged in
+
+diff /tmp/a /tmp/b
+
+<         USB Single Serial:
+<
+<           Product ID: 0x55d4
+<           Vendor ID: 0x1a86
+<           Version: 4.43
+<           Serial Number: 5382020878
+<           Speed: Up to 12 Mb/s
+<           Location ID: 0x14300000 / 63
+<           Current Available (mA): 500
+<           Current Required (mA): 134
+<           Extra Operating Current (mA): 0
--- a/info/ubuntu/nano_g1.txt
+++ b/info/ubuntu/nano_g1.txt
@@ -0,0 +1,91 @@
+lsusb -d 1a86: -v
+
+Bus 001 Device 013: ID 1a86:55d4 QinHeng Electronics
+Couldn't open device, some information will be missing
+Device Descriptor:
+  bLength                18
+  bDescriptorType         1
+  bcdUSB               1.10
+  bDeviceClass            2 Communications
+  bDeviceSubClass         0
+  bDeviceProtocol         0
+  bMaxPacketSize0         8
+  idVendor           0x1a86 QinHeng Electronics
+  idProduct          0x55d4
+  bcdDevice            4.43
+  iManufacturer           0
+  iProduct                2
+  iSerial                 3
+  bNumConfigurations      1
+  Configuration Descriptor:
+    bLength                 9
+    bDescriptorType         2
+    wTotalLength       0x0043
+    bNumInterfaces          2
+    bConfigurationValue     1
+    iConfiguration          0
+    bmAttributes         0xa0
+      (Bus Powered)
+      Remote Wakeup
+    MaxPower              134mA
+    Interface Descriptor:
+      bLength                 9
+      bDescriptorType         4
+      bInterfaceNumber        0
+      bAlternateSetting       0
+      bNumEndpoints           1
+      bInterfaceClass         2 Communications
+      bInterfaceSubClass      2 Abstract (modem)
+      bInterfaceProtocol      1 AT-commands (v.25ter)
+      iInterface              0
+      CDC Header:
+        bcdCDC               1.10
+      CDC Call Management:
+        bmCapabilities       0x00
+        bDataInterface          1
+      CDC ACM:
+        bmCapabilities       0x02
+          line coding and serial state
+      CDC Union:
+        bMasterInterface        0
+        bSlaveInterface         1
+      Endpoint Descriptor:
+        bLength                 7
+        bDescriptorType         5
+        bEndpointAddress     0x83  EP 3 IN
+        bmAttributes            3
+          Transfer Type            Interrupt
+          Synch Type               None
+          Usage Type               Data
+        wMaxPacketSize     0x0010  1x 16 bytes
+        bInterval               1
+    Interface Descriptor:
+      bLength                 9
+      bDescriptorType         4
+      bInterfaceNumber        1
+      bAlternateSetting       0
+      bNumEndpoints           2
+      bInterfaceClass        10 CDC Data
+      bInterfaceSubClass      0
+      bInterfaceProtocol      0
+      iInterface              0
+      Endpoint Descriptor:
+        bLength                 7
+        bDescriptorType         5
+        bEndpointAddress     0x02  EP 2 OUT
+        bmAttributes            2
+          Transfer Type            Bulk
+          Synch Type               None
+          Usage Type               Data
+        wMaxPacketSize     0x0020  1x 32 bytes
+        bInterval               0
+      Endpoint Descriptor:
+        bLength                 7
+        bDescriptorType         5
+        bEndpointAddress     0x82  EP 2 IN
+        bmAttributes            2
+          Transfer Type            Bulk
+          Synch Type               None
+          Usage Type               Data
+        wMaxPacketSize     0x0040  1x 64 bytes
+        bInterval               0
--- a/info/windows/nano_g1.txt
+++ b/info/windows/nano_g1.txt
@@ -0,0 +1,39 @@
+Get-PnpDevice -PresentOnly | Format-List >a
+Get-PnpDevice -PresentOnly | Format-List >b
+Compare-Object (get-content a) (Get-Content b)
+
+InputObject                                                                                              SideIndicator
+-----------                                                                                              -------------
+Caption                     : USB-Enhanced-SERIAL CH9102 (COM9)                                          =>
+Description                 : USB-Enhanced-SERIAL CH9102                                                 =>
+Name                        : USB-Enhanced-SERIAL CH9102 (COM9)                                          =>
+DeviceID                    : USB\VID_1A86&PID_55D4\5382020745                                           =>
+PNPDeviceID                 : USB\VID_1A86&PID_55D4\5382020745                                           =>
+ClassGuid                   : {4d36e978-e325-11ce-bfc1-08002be10318}                                     =>
+CompatibleID                : {USB\Class_02&SubClass_02&Prot_01, USB\Class_02&SubClass_02, USB\Class_02} =>
+HardwareID                  : {USB\VID_1A86&PID_55D4&REV_0443, USB\VID_1A86&PID_55D4}                    =>
+Manufacturer                : wch.cn                                                                     =>
+PNPClass                    : Ports                                                                      =>
+Service                     : CH343SER_A64                                                               =>
+Class                       : Ports                                                                      =>
+FriendlyName                : USB-Enhanced-SERIAL CH9102 (COM9)                                          =>
+InstanceId                  : USB\VID_1A86&PID_55D4\5382020745                                           =>
+InstallDate                 :                                                                            =>
+Status                      : OK                                                                         =>
+Availability                :                                                                            =>
+ConfigManagerErrorCode      : CM_PROB_NONE                                                               =>
+ConfigManagerUserConfig     : False                                                                      =>
+CreationClassName           : Win32_PnPEntity                                                            =>
+ErrorCleared                :                                                                            =>
+ErrorDescription            :                                                                            =>
+LastErrorCode               :                                                                            =>
+PowerManagementCapabilities :                                                                            =>
+PowerManagementSupported    :                                                                            =>
+StatusInfo                  :                                                                            =>
+SystemCreationClassName     : Win32_ComputerSystem                                                       =>
+SystemName                  : DESKTOP-FRFQN8H                                                            =>
+Present                     : True                                                                       =>
+PSComputerName              :                                                                            =>
+Problem                     : CM_PROB_NONE                                                               =>
+ProblemDescription          :                                                                            =>
+                                                                                                         =>
--- a/meshtastic/init.py
+++ b/meshtastic/init.py
@@ -94,7 +94,7 @@ BROADCAST_NUM = 0xffffffff
 BROADCAST_ADDR = "^all"
 """A special ID that means broadcast"""

-OUR_APP_VERSION = 20200
+OUR_APP_VERSION = 20300
 """The numeric buildnumber (shared with android apps) specifying the
   level of device code we are guaranteed to understand

--- a/meshtastic/radioconfig_pb2.py
+++ b/meshtastic/radioconfig_pb2.py
--- a/meshtastic/supported_device.py
+++ b/meshtastic/supported_device.py
@@ -82,9 +82,12 @@ rak4631_19003 = SupportedDevice(name="RAK 4631 19003", version="", for_firmware=
                                device_class="nrf52",
                                baseport_on_linux="ttyACM", baseport_on_mac="cu.usbmodem",
                                usb_vendor_id_in_hex="239a", usb_product_id_in_hex="8029")
+nano_g1 = SupportedDevice(name="Nano G1", version="", for_firmware="nano-g1",
+                              baseport_on_linux="ttyACM", baseport_on_mac="cu.usbmodem",
+                              usb_vendor_id_in_hex="1a86", usb_product_id_in_hex="55d4")

 supported_devices = [tbeam_v0_7, tbeam_v1_1, tbeam_M8N, tbeam_M8N_SX1262,
                     tlora_v1, tlora_v1_3, tlora_v2, tlora_v2_1_1_6,
                     heltec_v1, heltec_v2_0, heltec_v2_1,
                     meshtastic_diy_v1, techo_1, rak4631_5005, rak4631_5005_epaper, rak4631_19003,
-                     rak11200]
+                     rak11200, nano_g1]
--- a/2
+++ b/2
--- a/setup.py
+++ b/setup.py
@@ -12,7 +12,7 @@ with open("README.md", "r") as fh:
 # This call to setup() does all the work
 setup(
    name="meshtastic",
-    version="1.3alpha.12",
+    version="1.3alpha.15",
    description="Python API & client shell for talking to Meshtastic devices",
    long_description=long_description,
    long_description_content_type="text/markdown",
Author	SHA1	Message	Date
mkinney	bf6eec626c	Merge pull request #328 from mkinney/master add nano_g1	2022-04-27 11:35:44 -07:00
Mike Kinney	cd0bdbbd9c	add nano_g1	2022-04-27 11:29:05 -07:00
github-actions	e7faa85476	bump version	2022-04-27 12:33:09 +00:00
Ben Meadors	e419f95910	Merge pull request #327 from meshtastic/device-updates-release Updated protos	2022-04-27 07:21:56 -05:00
Ben Meadors	ee613104f1	Updated protos	2022-04-27 07:19:08 -05:00
github-actions	93a8722b22	bump version	2022-04-25 07:20:32 +00:00
Thomas Göttgens	73b06248aa	Update __init__.py Device firmware requires 20300 now - change coming from android.	2022-04-25 09:15:33 +02:00
Jm Casler	82169f9d58	updating proto submodule to latest	2022-04-20 18:01:40 -07:00
github-actions	1fa71f2e2d	bump version	2022-04-18 23:38:33 +00:00