The newer revive flags an exported function returning an unexported
type and a redundant type in a var declaration.
(cherry picked from commit 881cedd348)
ENETUNREACH and ENETDOWN were not in the list of retriable errors on
non-Windows platforms, so a single failed connection aborted the
transfer instead of being retried as a low level retry. The Windows
list already includes the equivalent WSAENETUNREACH and WSAENETDOWN.
This is easy to hit on a host with IPv6 enabled but no IPv6 route: if
the A lookup fails transiently while the AAAA lookup succeeds, the only
address to dial is IPv6 and the connect fails with ENETUNREACH. A retry
resolves again and normally succeeds.
(cherry picked from commit 94e319d2fa)
BwPair.String printed a sub-KiB bandwidth as a bare number, and Set
reads a bare number as KiB, so a rate under 1 KiB grew by a factor of
1024 whenever it went through a string. rc core/bwlimit reports the
current rate in that format and accepts it back, so reading the limit
and setting it again raised it.
63c4fef27 fixed the same corruption for config values by suffixing bare
numbers with B inside Option.String. Move that into a SizeSuffix method
and use it from BwPair.String as well.
(cherry picked from commit 60bdc6d454)
When a backend rejected the multipart upload as too small, the subtest
skipped without removing its local source file, so the following
upload subtests failed their local listing checks.
(cherry picked from commit ee9c228012)
TestDeleteFatalError set --max-delete before writing its files, so on
chunker, which deletes while uploading, the setup failed.
TestDirMoveMoveError and TestDirMoveContext test the core DirMove logic
with a wrapping Fs. This fails on remotes without Move (eg s3, memory)
and on those whose objects don't belong to the wrapped Fs (eg archive),
so they now only run on local.
(cherry picked from commit ff958c999f)
When the source matched a file in --copy-dest, copyDest server-side
copied it over an existing destination which differed, so sync, copy
and copyto with --copy-dest could modify a file --immutable should have
protected.
Leave such a destination for the caller, which rejects it with
ErrorImmutableModified as for any other modified file.
(cherry picked from commit dc98c216f2)
This was spotted by CodeQL after this change was merged:
976d05e1d rc: fix rc API accepting an out of range number and overflowing 64 bits
(cherry picked from commit 7723091be9)
job/status returns the complete output of the job so it is as
sensitive as the call which started the job, e.g. config/dump started
with _async returns the config file including any secrets. It was
possible to read this without authentication where an authenticated
and an unauthenticated rc server share the same process, e.g. rclone
gui --rc.
An unauthenticated client can't start jobs on a server which needs
authentication, other than with the calls which don't need it, so
this shouldn't affect existing users.
(cherry picked from commit 939f82d908)
Handle read the list of extra outputs without holding the mutex, so
calling AddOutput while logging caused a data race.
This reads the extra outputs once under the mutex.
(cherry picked from commit 4cd6359ae9)
TestRcJobList listed the jobs left running in the global job list by
the previous run of the tests, so reset the global job list first.
(cherry picked from commit dd07bb33ba)
The wait to obey a Retry-After error from the server used
time.Sleep() so it carried on sleeping when the context was
cancelled, e.g. by job/stop or --max-duration, and it also slept
after the last try when there was nothing left to retry.
Copying a file also logged the low level retry number counting from
0 rather than 1 as everything else does.
(cherry picked from commit 88bd49fab8)
When the backend has no DirMove method, operations.DirMove moves the
objects one by one. If one of the moves failed the movers stopped
without receiving the rest of the objects, so DirMove blocked forever
once the channel filled up. This could be seen renaming a directory on
a mount of a backend without DirMove, such as s3.
The moves were also done with context.Background() instead of the
caller's context, so they didn't have the caller's config, couldn't
be cancelled and weren't counted in the caller's stats.
(cherry picked from commit b82a024de0)
When a fatal error such as --max-delete being reached stopped the
deletions, the deleters returned without receiving the rest of the
objects, so whatever was sending them blocked forever once the
channel filled up.
For example "rclone delete --max-delete 1" on a directory with more
files than --checkers hung instead of returning the error.
The deleters now keep receiving objects without deleting them after a
fatal error.
(cherry picked from commit caa341878f)
Params.GetInt64 parsed string parameters with strconv.ParseInt(x, 10, 0).
A bitSize of 0 means int, which is 32 bits on 386, arm, mips and mipsle,
so any value outside the int32 range was rejected as out of range even
though it fits in the int64 the method returns.
Parameters reach the rc API as strings on the paths that matter here: the
rc server puts every URL query and form value into Params as a string, and
rclone rc turns each key=value argument into a string. So on a 32 bit build
operations/getfile could not be given an offset, count, head or tail beyond
2 GiB, and debug/set-soft-memory-limit could not be given a limit beyond
2 GiB, while the same commands worked on a 64 bit build.
Parse with a bitSize of 64 to match the declared return type. This is the
string half of the range checking that was added to the float64 branch of
the same function in 976d05e1.
(cherry picked from commit b5f83bdbf2)
Return the first non-EOF input error encountered while Rcat probes whether an
upload is small. Previously that error was ignored and the full probe buffer,
including bytes that were never read, could be passed to Put or PutStream.
(cherry picked from commit b93b73bcb0)
float64(math.MaxInt64) rounds up to 2^63, so x > math.MaxInt64 in
GetInt64 lets 2^63 through to int64(x), which is out of range.
(cherry picked from commit 976d05e1dd)
Release the averaging goroutine when checks outlast transfers, with a regression
test for the completion order.
Assisted-by: OpenAI Codex
(cherry picked from commit 4f0148db0c)
NewUsageValue exists to clip an oversized quota to the maximum value of an
int64, which is what dc95f36bc added it for when Box raised the Enterprise
space_amount to 1e+18 and started returning it as a float.
For the float64 instantiation the guard misses its own boundary.
float64(math.MaxInt64) is not 2**63-1, it rounds up to 2**63, so a quota of
exactly 2**63 fails the comparison and falls through to the int64 conversion,
which the spec leaves implementation dependent for an unrepresentable value.
On linux/amd64 it wraps:
Before: rclone about -> Total=-9223372036854775808
After: rclone about -> Total=9223372036854775807
A negative total is not just a wrong number. vfs.Statfs documents -1 as "not
known", vfs.fillInMissingSizes branches on total < 0, and serve sftp only
computes its usage percentage when total > 0, so the value is read back as a
missing quota.
The int64 and uint64 instantiations are unaffected, since for them
T(int64(math.MaxInt64)) is exact and clipping MaxInt64 to MaxInt64 is a no-op.
(cherry picked from commit 52ac7e0e18)
Set built the timetable with *x = append(*x, ts), so setting a bandwidth
timetable on a value that already held one kept both schedules. The single-value
branch of the same function has always done *x = BwTimetable{ts}, and the other
multi-token Set methods in this package build into a local and assign at the end.
The visible effect is through the rc API. The "main" options block registered in
fs.RegisterGlobalOptions is the live globalConfig, and options/set reshapes JSON
straight into it, so
rclone rc options/set --json '{"main": {"BwLimit": "Mon-10:00,1Mi"}}'
added to the running daemon's timetable rather than replacing it, and the older
slot kept winning: LimitAt for a Sunday returned the previous 10Mi. The same
applies to a _config override on a single call, since AddConfig shallow-copies
the global.
Building into a local also stops a failed parse from leaving the previous
timetable partly overwritten, which the existing error cases already expect.
(cherry picked from commit 5bbc5d5545)
IsErrNoSpace compared against syscall.ENOSPC. Go defines that constant on
Windows as a value in its application reserved range which no Windows API
returns, so the comparison could never be true there. A full disk on Windows
reports ERROR_DISK_FULL or ERROR_HANDLE_DISK_FULL instead.
Preallocation failures were still caught, because those return a separate
sentinel, but a disk that is already full fails at the directory creation or
at the open long before preallocation is reached. That is the case reported.
The errors are now held in a list which platform specific files add to in
their init, which is the shape retriable_errors already uses in this package,
and the comparison itself is unchanged. Windows appends the two codes that
lib/file already recognises when preallocation fails. Every other platform
keeps exactly the behaviour it had.
This also reaches the VFS cache, which uses the same helper and has no
preallocation path of its own, so its out of space handling has been inert
on Windows.
(cherry picked from commit ca41db095b)
Before this change `rclone dedupe --dedupe-mode rename` probed the
backend for each candidate `name-N.ext` in turn and gave up when it
had tried 100 names for a given object. With daily runs against the
same duplicated filename this ceiling was eventually reached and
rclone logged "Could not find an available new name". Each probe was
also a backend lookup, so a run against 99 existing names took
minutes on Google Drive.
The rename now uses the listing dedupe has already made to skip names
known to be taken without asking the backend, and only confirms the
final candidate with NewObject (the listing may be incomplete because
of filters). The suffix counter is shared between the objects being
renamed so no name is checked twice. The safety limit is raised to
10000 which, thanks to the listing, no longer costs a lookup per name.
(cherry picked from commit bc4a208e7e)
This was fixed in this commit in an inelegant way
399bc6a6a6 fshttp: don't send --header values to other hosts on redirect
The current commit fixes it properly with AddConfig.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
(cherry picked from commit 1b4dea8dac)
Raising the minimum Go version to 1.26 made staticcheck flag the
deprecated ReverseProxy.Director. This code is unmaintained and has
been removed on the development branch, so suppress the warning rather
than rewrite it.
The dataflow analysis behind SA4023, new in the staticcheck 0.8.0
bundled with golangci-lint v2.13.0, makes linting large packages more
than 10x slower (89s vs 7s for backend/s3 alone) which took the CI
lint job past its 30 minute limit. golangci-lint no longer enforces
its run timeout during analysis so the job ran until cancelled, and
the cancellation meant the lint cache was never saved, making every
subsequent run cold and guaranteeing the timeout repeated.
The check also produces false positives (eg claiming operations.Delete
never returns nil).
(cherry picked from commit 357c2a2b44)
The headers set with --header and --header-download are added to
every request by the rclone transport, including redirect hops which
net/http makes to other hosts, so a credential passed with --header
for one host could be sent to any host that server chose to redirect
to.
The transport now walks the redirect chain net/http records on each
redirected request and, once the chain has visited a host other than
the one originally requested, removes the headers rather than adding
them.
Also restore the global --client-cert and --client-key config after
TestCertificates so its temporary files are not used by later tests.
(cherry picked from commit 101c3e342c86ae65c7c743474d7319330f0eb0ca)
The rclone core does not sanitise ".." in an object's Remote(). Such a name can
arrive from a malicious or buggy backend - an object store permits keys
containing ".." or a leading "/" - and, if acted on, lets a listing or transfer
escape the configured root. A source object named "../../other/x" is copied to
"other/x" outside the destination root, and a crafted listing name surfaces
outside the directory being listed.
Add list.RemoteEscapesRoot, which reports whether a Remote climbs above the
root when joined onto it, and list.RemoveEscaping, which drops and logs such
entries.
Apply RemoveEscaping unconditionally - independent of the include/exclude
filters - at the three per-entry filtering points every listing passes through:
filterDir, walk.listR and walk.walkRDirTree (recursive ListR).
operations.StatJSON calls List and NewObject directly, bypassing those, so it
rejects an escaping remote up front.
This confines every backend at once, so no per-backend change is needed.
(cherry picked from commit 3530367fcdefeb718d9cac14a5147836b448bc73)
golang.org/x/crypto v0.56.0, which fixes CVE-2026-78662 and
CVE-2026-56855 in its ssh package, requires go1.26, so rclone can no
longer be built with go1.25.
The concurrent walker created by walk() only stopped when the callback
returned an error or the whole tree had been listed. Cancelling the
context (for example via the rc job/stop endpoint for an async
operations/size or recursive operations/list call) was therefore
ignored: the checkers kept pulling list jobs from the channel and kept
listing the entire tree, burning CPU and making job cancellation
useless for every backend without a native ListR implementation.
Make every checker select on ctx.Done() so a cancelled walk shuts down
promptly through the existing quit/drain path and reports the context
error. Also check the context between directory read chunks in the
local backend so a single huge directory does not block cancellation.
(cherry picked from commit 5eb5c01e36)
Add response validation for calls made with Range open options. Verify
Content-Range, Content-Length, response status, and the complete
representation size before a backend accepts the response body.
Return a shared sentinel when a server ignores a partial range so callers
can avoid retrying the same unsupported request.
(cherry picked from commit 69e5aff2a9)
Before this change the environment variable getters in fs/configmap.go
logged the option value with %q, so a password set via
RCLONE_CONFIG_remote_pass (or RCLONE_remote_pass) was printed in full
to the debug log. Values from the config file were already redacted,
which made the leak easy to miss.
This change routes both getters through fs.RedactOptionValue, which
looks up the option in the backend's option list: options marked
IsPassword or Sensitive log as XXX, unknown options are conservatively
redacted, and --dump auth still shows the value for debugging.
Fixes#5794
(cherry picked from commit adc7f2ebfa)
Before this change, `NewStats` stored the context it was created from on the
`StatsInfo`. Stats groups are never freed -- they are only evicted once there are
`--max-stats-groups` of them -- so each one kept its context, and everything reachable
from it, alive for the life of the process. As the rc creates a group per call,
that included the call's filters and their compiled regexps.
The context was only ever used to get `ci.StatsFileNameLength` from the config.
`StatsInfo` already stores that same `*fs.ConfigInfo`, read from the same
context in `NewStats`.
This change fixes the issue by passing the stored ci to `transferMap.String` and
dropping the context from `StatsInfo`.
(cherry picked from commit abae66ee1a)
Before this change, Transfer.Done closed the account of a completed transfer but
never released it, because it assigned nil to only a local copy of the pointer.
As a result, every completed transfer continued to reference its account.
An Account holds the transfer context and the source reader, and the stats keep
completed transfers around up to `MaxCompletedTransfers` per group, with groups
discarded only at --max-stats-groups. On a long-running `rclone rcd`, this adds up.
It was noticeable when running bisync repeatedly via the rc, where the transfer
context carries `b.WriteResults` (bisync's `LoggerFn`). A `*bisyncRun` holds
Path1 and Path2 listings, which can be quite large, and are not supposed to be
retained between runs. (Naturally they aren't, when running bisync on the
command line -- which is probably why we didn't notice this issue sooner.)
This change fixes the issue by releasing `tr.acc` in Done, instead of the local
copy. `tr.Snapshot` reads the byte counts off the account, so the progress is
recorded on the transfer first. That read happens before taking `tr.mu`, because
`acc.progress()` locks `acc.values.mu`, `checkReadBefore` holds that lock while
calling `StatsInfo.GetBytes`, and `StatsInfo` locks back into `Transfer` in
`Transferred` and `_removeTransfer`.
(cherry picked from commit 71a0932126)
Uploads through RcatSize with a known size - used by rcat --size, the
rc operations/uploadfile and the serve backends, eg serve restic - did
not check the size of the uploaded object. If the source stream ended
before the declared size worth of data had been read, the truncated
object was reported as a successful upload. This could corrupt data
for callers which trust the result, eg a restic repository accessed
via serve restic (see #9722).
This adds the same size check operations.Copy performs after a copy,
respecting --ignore-size and backends which do not report sizes.
(cherry picked from commit 9b13247ba8)
With --rc-serve set the root listing enumerated the names of all configured
remotes without any authentication.
Make the root listing obey the same fail-closed rule as the rest of
the rc endpoints: it now requires authentication to be configured or
an explicit opt out with --rc-no-auth.
Addresses GHSA-mfvx-7rcj-9m5g finding 2.
The pprof debug handlers were accessible without authentication disclosing the
process command line (which can carry backend credentials passed on the command
line) and runtime profiles.
Mount the pprof handlers only when when auth is configured or --rc-no-auth was
passed - so they obey the same rule as the rc endpoints.
Addresses GHSA-mfvx-7rcj-9m5g finding 1.
Before this change, rclone sent stack traces to the client on panic
capture in the rc. Stack traces can leak information which could be
useful to an attacker.
The march janitor goroutine, which discards queued jobs when the context is
cancelled, only ever returned on context cancellation. A march that finished
normally never cancels its context, so on an async rc job (whose context
descends from context.Background and is only cancelled by job/stop) the
janitor parked forever, leaking one goroutine per run and pinning that run's
directory listings in memory. A long-running rcd driving async sync or bisync
jobs accumulated these until it ran out of memory.
Signal the janitor to exit once the march completes so it returns on both
normal completion and cancellation.
When an HTTP/2 server retires a connection with GOAWAY after it has
already sent successful response headers, Go's http2 transport fails the
read of the response body with
http2: server sent GOAWAY and closed the connection; LastStreamID=..., ErrCode=NO_ERROR, debug=""
This was not recognised as a retriable networking error, so a transient
connection retirement aborted the whole command instead of consuming a
low level retry. It was reported against a large S3 check, where an
interrupted ListObjectsV2 page made rclone report destination objects as
missing and exit unsuccessfully.
The concrete error type is unexported by net/http, so match on the
message as we already do for the other http2 transport errors.
Sync refuses to delete files when the global error stats are non-zero
so a single backend error in one transform test made every following
transform test in the same test binary fail with "not deleting files
as there were IO errors". Reset the stats at the start of each test.
ownCloud does not carry the checksum over to the destination of a
server side copy and refuses attempts to set it afterwards, so the
destination legitimately has no hash. The logger vs lsf check
compared the predicted hash against the empty hash and failed.
Treat an empty hash in the listing as unknown rather than wrong,
matching how sync itself compares hashes.
Previously running rclone config (or driving it via the rc API or web
GUI) with -vv would write secrets to the debug log.
This was dangerous as users debugging a failing config flow often
paste their -vv logs into the forum or GitHub issues.
These values are now redacted from the log as "XXX". Values whose
option is known are only redacted if the option is marked IsPassword
or Sensitive, so normal answers remain visible.
Use --dump auth to see the unredacted values when debugging a config
flow - rclone prints a warning that secrets will appear in the log
when this is in effect.
This was discovered by CodeQL: https://github.com/rclone/rclone/security/code-scanning/182
The logging functions take an object which is rendered into the log
line. Rendering it with %+v dumps all its fields, which for an object
holding backend config would include decrypted credentials. Every
object currently logged is a string or has a String method, so render
anything else as just its type to keep credentials out of the logs.
See: https://github.com/rclone/rclone/security/code-scanning/183
TestRcDu relied on the default cache directory already existing. In clean
or container environments diskusage.New returned ENOENT, which the test
ignored before type asserting a nil result.
Use a temporary directory and require a successful response before
checking the disk usage values.
When doing a copy (no delete mode) without a logger, the destination
listing can be cancelled as soon as the source listing finishes, since
dst-only entries won't be processed.
This is particularly beneficial with --fast-list where the dst listing
may fetch the entire directory tree upfront via ListR. Cancelling it
early avoids waiting for a potentially large listing that won't be used.
Adds NoProcessDstOnly flag to March which, when set, cancels the dst
listing context once the source channel is exhausted in matchListings.
Fixes#9226
Nick Craig-Wood