preparing for release of 2.2.0

Note: the same thing works for ftp and http URLs in netscape.

Makefile.in

@@ -3,8 +3,8 @@
 
 prefix=@prefix@
 exec_prefix=@exec_prefix@
-INSTALL_BIN=$(exec_prefix)/bin
-INSTALL_MAN=$(prefix)/man
+bindir=@bindir@
+mandir=@mandir@
 
 LIBS=@LIBS@
 CC=@CC@
@@ -12,38 +12,46 @@ CFLAGS=@CFLAGS@
 
 INSTALLCMD=@INSTALL@
 
-VPATH=@srcdir@
 srcdir=@srcdir@
+VPATH=$(srcdir)
 SHELL=/bin/sh
 
 
 .SUFFIXES:
 .SUFFIXES: .c .o
 
-LIBOBJ=lib/getopt.o lib/fnmatch.o lib/zlib.o lib/compat.o
-OBJS1=rsync.o exclude.o util.o md4.o main.o checksum.o match.o syscall.o log.o
-OBJS2=options.o flist.o io.o compat.o hlink.o token.o uidlist.o socket.o 
+LIBOBJ=lib/getopt.o lib/fnmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o
+ZLIBOBJ=zlib/deflate.o zlib/infblock.o zlib/infcodes.o zlib/inffast.o \
+	zlib/inflate.o zlib/inftrees.o zlib/infutil.o zlib/trees.o \
+	zlib/zutil.o zlib/adler32.o 
+OBJS1=rsync.o generator.o receiver.o cleanup.o sender.o exclude.o util.o main.o checksum.o match.o syscall.o log.o
+OBJS2=options.o flist.o io.o compat.o hlink.o token.o uidlist.o socket.o fileio.o
 DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o
-OBJS=$(OBJS1) $(OBJS2) $(DAEMON_OBJ) $(LIBOBJ)
+OBJS=$(OBJS1) $(OBJS2) $(DAEMON_OBJ) $(LIBOBJ) $(ZLIBOBJ)
 
 # note that the -I. is needed to handle config.h when using VPATH
 .c.o:
-	$(CC) -I. -I$(srcdir) $(CFLAGS) -c $< -o $@
+@OBJ_SAVE@
+	$(CC) -I. -I$(srcdir) $(CFLAGS) -c $< @CC_SHOBJ_FLAG@
+@OBJ_RESTORE@
 
 all: rsync
 
 man: rsync.1 rsyncd.conf.5
 
 install: all
-	-mkdir -p ${INSTALL_BIN}
-	${INSTALLCMD} -m 755 rsync ${INSTALL_BIN}
-	-mkdir -p ${INSTALL_MAN}/man1
-	-mkdir -p ${INSTALL_MAN}/man5
-	${INSTALLCMD} -m 644 $(srcdir)/rsync.1 ${INSTALL_MAN}/man1
-	${INSTALLCMD} -m 644 $(srcdir)/rsyncd.conf.5 ${INSTALL_MAN}/man5
+	-mkdir -p ${bindir}
+	${INSTALLCMD} -m 755 rsync ${bindir}
+	-mkdir -p ${mandir}/man1
+	-mkdir -p ${mandir}/man5
+	${INSTALLCMD} -m 644 $(srcdir)/rsync.1 ${mandir}/man1
+	${INSTALLCMD} -m 644 $(srcdir)/rsyncd.conf.5 ${mandir}/man5
+
+install-strip:
+	$(MAKE) INSTALLCMD='$(INSTALLCMD) -s' install
 
 rsync: $(OBJS)
-	$(CC) $(CFLAGS) -o rsync $(OBJS) $(LIBS)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o rsync $(OBJS) $(LIBS)
 
 rsync.1: rsync.yo
 	yodl2man -o rsync.1 rsync.yo
@@ -55,12 +63,13 @@ proto:
 	cat *.c | awk -f mkproto.awk > proto.h
 
 clean:
-	rm -f *~ $(OBJS) rsync config.cache config.log config.status
+	rm -f *~ $(OBJS) rsync 
 
-dist:
-	tar --exclude-from .ignore -czf dist.tar.gz .
-	-mkdir rsync-$(VERSION)
-	(cd rsync-$(VERSION) ; tar xzf ../dist.tar.gz)
-	tar -czf rsync-$(VERSION).tar.gz rsync-$(VERSION)
-	rm -f dist.tar.gz
-	echo rsync-$(VERSION) >> .cvsignore
+
+# this target is really just for my use. It only works on a limited
+# range of machines and is used to produce a list of potentially
+# dead (ie. unused) functions in the code. (tridge)
+finddead:
+	nm *.o */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
+	nm *.o */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
+	comm -13 nmused.txt nmfns.txt 

access.c

@@ -34,7 +34,7 @@ static int match_hostname(char *host, char *tok)
 static int match_address(char *addr, char *tok)
 {
 	char *p;
-	unsigned long a, t, mask = ~0;
+	unsigned long a, t, mask = (unsigned long)~0;
 
 	if (!addr || !*addr) return 0;
 

acconfig.h

@@ -7,3 +7,5 @@
 #undef HAVE_UTIMBUF
 #undef ino_t
 #undef HAVE_CONNECT
+#undef HAVE_SHORT_INO_T
+#undef REPLACE_INET_NTOA

aclocal.m4

@@ -0,0 +1,23 @@
+dnl AC_VALIDATE_CACHE_SYSTEM_TYPE[(cmd)]
+dnl if the cache file is inconsistent with the current host,
+dnl target and build system types, execute CMD or print a default
+dnl error message.
+AC_DEFUN(AC_VALIDATE_CACHE_SYSTEM_TYPE, [
+    AC_REQUIRE([AC_CANONICAL_SYSTEM])
+    AC_MSG_CHECKING([config.cache system type])
+    if { test x"${ac_cv_host_system_type+set}" = x"set" &&
+         test x"$ac_cv_host_system_type" != x"$host"; } ||
+       { test x"${ac_cv_build_system_type+set}" = x"set" &&
+         test x"$ac_cv_build_system_type" != x"$build"; } ||
+       { test x"${ac_cv_target_system_type+set}" = x"set" &&
+         test x"$ac_cv_target_system_type" != x"$target"; }; then
+	AC_MSG_RESULT([different])
+	ifelse($#, 1, [$1],
+		[AC_MSG_ERROR(["you must remove config.cache and restart configure"])])
+    else
+	AC_MSG_RESULT([same])
+    fi
+    ac_cv_host_system_type="$host"
+    ac_cv_build_system_type="$build"
+    ac_cv_target_system_type="$target"
+])

authenticate.c

@@ -112,7 +112,7 @@ static int get_secret(int module, char *user, char *secret, int len)
 }
 
 /* generate a 16 byte hash from a password and challenge */
-void generate_hash(char *in, char *challenge, char *out)
+static void generate_hash(char *in, char *challenge, char *out)
 {
 	char buf[16];
 
@@ -125,21 +125,28 @@ void generate_hash(char *in, char *challenge, char *out)
 }
 
 /* possible negotiate authentication with the client. Use "leader" to
-   start off the auth if necessary */
-int auth_server(int fd, int module, char *addr, char *leader)
+   start off the auth if necessary 
+
+   return NULL if authentication failed
+
+   return "" if anonymous access
+
+   otherwise return username
+*/
+char *auth_server(int fd, int module, char *addr, char *leader)
 {
 	char *users = lp_auth_users(module);
 	char challenge[16];
 	char b64_challenge[30];
 	char line[MAXPATHLEN];
-	char user[100];
+	static char user[100];
 	char secret[100];
 	char pass[30];
 	char pass2[30];
 	char *tok;
 
 	/* if no auth list then allow anyone in! */
-	if (!users || !*users) return 1;
+	if (!users || !*users) return "";
 
 	gen_challenge(addr, challenge);
 	
@@ -148,18 +155,18 @@ int auth_server(int fd, int module, char *addr, char *leader)
 	io_printf(fd,"%s%s\n", leader, b64_challenge);
 
 	if (!read_line(fd, line, sizeof(line)-1)) {
-		return 0;
+		return NULL;
 	}
 
 	memset(user, 0, sizeof(user));
 	memset(pass, 0, sizeof(pass));
 
 	if (sscanf(line,"%99s %29s", user, pass) != 2) {
-		return 0;
+		return NULL;
 	}
 
 	users = strdup(users);
-	if (!users) return 0;
+	if (!users) return NULL;
 
 	for (tok=strtok(users," ,\t"); tok; tok = strtok(NULL," ,\t")) {
 		if (strcmp(tok, user) == 0) break;
@@ -167,19 +174,22 @@ int auth_server(int fd, int module, char *addr, char *leader)
 	free(users);
 
 	if (!tok) {
-		return 0;
+		return NULL;
 	}
 	
 	memset(secret, 0, sizeof(secret));
 	if (!get_secret(module, user, secret, sizeof(secret)-1)) {
 		memset(secret, 0, sizeof(secret));
-		return 0;
+		return NULL;
 	}
 
 	generate_hash(secret, b64_challenge, pass2);
 	memset(secret, 0, sizeof(secret));
 	
-	return (strcmp(pass, pass2) == 0);
+	if (strcmp(pass, pass2) == 0)
+		return user;
+
+	return NULL;
 }
 
 

checksum.c

@@ -49,82 +49,71 @@ uint32 get_checksum1(char *buf1,int len)
 }
 
 
-static void sum_put(MDstruct *md,char *sum)
-{
-  SIVAL(sum,0,md->buffer[0]);
-  if (csum_length <= 4) return;
-  SIVAL(sum,4,md->buffer[1]);
-  if (csum_length <= 8) return;
-  SIVAL(sum,8,md->buffer[2]);
-  if (csum_length <= 12) return;
-  SIVAL(sum,12,md->buffer[3]);
-}
-
-
 void get_checksum2(char *buf,int len,char *sum)
 {
-  int i;
-  MDstruct MD;
-  static char *buf1;
-  static int len1;
+	int i;
+	static char *buf1;
+	static int len1;
+	struct mdfour m;
 
-  if (len > len1) {
-    if (buf1) free(buf1);
-    buf1 = (char *)malloc(len+4);
-    len1 = len;
-    if (!buf1) out_of_memory("get_checksum2");
-  }
-
-  MDbegin(&MD);
-
-  bcopy(buf,buf1,len);
-  if (checksum_seed) {
-    SIVAL(buf1,len,checksum_seed);
-    len += 4;
-  }
-
-  for(i = 0; i + CSUM_CHUNK <= len; i += CSUM_CHUNK) {
-    MDupdate(&MD, buf1+i, CSUM_CHUNK*8);
-  }
-  if (len - i > 0)
-    MDupdate(&MD, buf1+i, (len-i)*8);
-
-  sum_put(&MD,sum);
+	if (len > len1) {
+		if (buf1) free(buf1);
+		buf1 = (char *)malloc(len+4);
+		len1 = len;
+		if (!buf1) out_of_memory("get_checksum2");
+	}
+	
+	mdfour_begin(&m);
+	
+	memcpy(buf1,buf,len);
+	if (checksum_seed) {
+		SIVAL(buf1,len,checksum_seed);
+		len += 4;
+	}
+	
+	for(i = 0; i + CSUM_CHUNK <= len; i += CSUM_CHUNK) {
+		mdfour_update(&m, (uchar *)(buf1+i), CSUM_CHUNK);
+	}
+	if (len - i > 0) {
+		mdfour_update(&m, (uchar *)(buf1+i), (len-i));
+	}
+	
+	mdfour_result(&m, (uchar *)sum);
 }
 
 
 void file_checksum(char *fname,char *sum,OFF_T size)
 {
-  OFF_T i;
-  MDstruct MD;
-  struct map_struct *buf;
-  int fd;
-  OFF_T len = size;
-  char tmpchunk[CSUM_CHUNK];
+	OFF_T i;
+	struct map_struct *buf;
+	int fd;
+	OFF_T len = size;
+	char tmpchunk[CSUM_CHUNK];
+	struct mdfour m;
+	
+	memset(sum,0,csum_length);
+	
+	fd = open(fname,O_RDONLY);
+	if (fd == -1) return;
+	
+	buf = map_file(fd,size);
+	
+	mdfour_begin(&m);
 
-  bzero(sum,csum_length);
+	for(i = 0; i + CSUM_CHUNK <= len; i += CSUM_CHUNK) {
+		memcpy(tmpchunk, map_ptr(buf,i,CSUM_CHUNK), CSUM_CHUNK);
+		mdfour_update(&m, (uchar *)tmpchunk, CSUM_CHUNK);
+	}
 
-  fd = open(fname,O_RDONLY);
-  if (fd == -1) return;
+	if (len - i > 0) {
+		memcpy(tmpchunk, map_ptr(buf,i,len-i), len-i);
+		mdfour_update(&m, (uchar *)tmpchunk, (len-i));
+	}
 
-  buf = map_file(fd,size);
+	mdfour_result(&m, (uchar *)sum);
 
-  MDbegin(&MD);
-
-  for(i = 0; i + CSUM_CHUNK <= len; i += CSUM_CHUNK) {
-    bcopy(map_ptr(buf,i,CSUM_CHUNK),tmpchunk,CSUM_CHUNK);
-    MDupdate(&MD, tmpchunk, CSUM_CHUNK*8);
-  }
-
-  if (len - i > 0) {
-    bcopy(map_ptr(buf,i,len-i),tmpchunk,len-i);
-    MDupdate(&MD, tmpchunk, (len-i)*8);
-  }
-
-  sum_put(&MD,sum);
-
-  close(fd);
-  unmap_file(buf);
+	close(fd);
+	unmap_file(buf);
 }
 
 
@@ -138,58 +127,54 @@ void checksum_init(void)
 
 
 
-static MDstruct sumMD;
 static int sumresidue;
 static char sumrbuf[CSUM_CHUNK];
+static struct mdfour md;
 
 void sum_init(void)
 {
-  char s[4];
-  MDbegin(&sumMD);  
-  sumresidue=0;
-  SIVAL(s,0,checksum_seed);
-  sum_update(s,4);
+	char s[4];
+	mdfour_begin(&md);
+	sumresidue=0;
+	SIVAL(s,0,checksum_seed);
+	sum_update(s,4);
 }
 
 void sum_update(char *p,int len)
 {
-  int i;
-  if (len + sumresidue < CSUM_CHUNK) {
-    bcopy(p,sumrbuf+sumresidue,len);
-    sumresidue += len;
-    return;
-  }
+	int i;
+	if (len + sumresidue < CSUM_CHUNK) {
+		memcpy(sumrbuf+sumresidue, p, len);
+		sumresidue += len;
+		return;
+	}
 
-  if (sumresidue) {
-    i = MIN(CSUM_CHUNK-sumresidue,len);
-    bcopy(p,sumrbuf+sumresidue,i);
-    MDupdate(&sumMD, sumrbuf, (i+sumresidue)*8);
-    len -= i;
-    p += i;
-  }
+	if (sumresidue) {
+		i = MIN(CSUM_CHUNK-sumresidue,len);
+		memcpy(sumrbuf+sumresidue,p,i);
+		mdfour_update(&md, (uchar *)sumrbuf, (i+sumresidue));
+		len -= i;
+		p += i;
+	}
 
-  for(i = 0; i + CSUM_CHUNK <= len; i += CSUM_CHUNK) {
-    bcopy(p+i,sumrbuf,CSUM_CHUNK);
-    MDupdate(&sumMD, sumrbuf, CSUM_CHUNK*8);
-  }
+	for(i = 0; i + CSUM_CHUNK <= len; i += CSUM_CHUNK) {
+		memcpy(sumrbuf,p+i,CSUM_CHUNK);
+		mdfour_update(&md, (uchar *)sumrbuf, CSUM_CHUNK);
+	}
 
-  if (len - i > 0) {
-    sumresidue = len-i;
-    bcopy(p+i,sumrbuf,sumresidue);
-  } else {
-    sumresidue = 0;    
-  }
+	if (len - i > 0) {
+		sumresidue = len-i;
+		memcpy(sumrbuf,p+i,sumresidue);
+	} else {
+		sumresidue = 0;    
+	}
 }
 
 void sum_end(char *sum)
 {
-  if (sumresidue)
-    MDupdate(&sumMD, sumrbuf, sumresidue*8);
+	if (sumresidue) {
+		mdfour_update(&md, (uchar *)sumrbuf, sumresidue);
+	}
 
-  SIVAL(sum,0,sumMD.buffer[0]);
-  SIVAL(sum,4,sumMD.buffer[1]);
-  SIVAL(sum,8,sumMD.buffer[2]);
-  SIVAL(sum,12,sumMD.buffer[3]);  
+	mdfour_result(&md, (uchar *)sum);
 }
-
-

cleanup.c

@@ -0,0 +1,87 @@
+/* 
+   Copyright (C) Andrew Tridgell 1996
+   Copyright (C) Paul Mackerras 1996
+   
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+   
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "rsync.h"
+
+/* handling the cleanup when a transfer is interrupted is tricky when
+   --partial is selected. We need to ensure that the partial file is
+   kept if any real data has been transferred */
+int cleanup_got_literal=0;
+
+static char *cleanup_fname;
+static char *cleanup_new_fname;
+static struct file_struct *cleanup_file;
+static int cleanup_fd1, cleanup_fd2;
+static struct map_struct *cleanup_buf;
+static int cleanup_pid = 0;
+
+void exit_cleanup(int code)
+{
+	extern int keep_partial;
+
+	signal(SIGUSR1, SIG_IGN);
+
+	if (cleanup_got_literal && cleanup_fname && keep_partial) {
+		char *fname = cleanup_fname;
+		cleanup_fname = NULL;
+		if (cleanup_buf) unmap_file(cleanup_buf);
+		if (cleanup_fd1 != -1) close(cleanup_fd1);
+		if (cleanup_fd2 != -1) close(cleanup_fd2);
+		finish_transfer(cleanup_new_fname, fname, cleanup_file);
+	}
+	io_flush();
+	if (cleanup_fname)
+		do_unlink(cleanup_fname);
+	if (code) {
+		kill_all(SIGUSR1);
+	}
+	if ((cleanup_pid != 0) && (cleanup_pid == (int) getpid())) {
+		char *pidf = lp_pid_file();
+		if (pidf && *pidf) {
+			unlink(lp_pid_file());
+		}
+	}
+
+	if (code) log_exit(code);
+
+	exit(code);
+}
+
+void cleanup_disable(void)
+{
+	cleanup_fname = NULL;
+	cleanup_got_literal = 0;
+}
+
+
+void cleanup_set(char *fnametmp, char *fname, struct file_struct *file,
+		 struct map_struct *buf, int fd1, int fd2)
+{
+	cleanup_fname = fnametmp;
+	cleanup_new_fname = fname;
+	cleanup_file = file;
+	cleanup_buf = buf;
+	cleanup_fd1 = fd1;
+	cleanup_fd2 = fd2;
+}
+
+void cleanup_set_pid(int pid)
+{
+	cleanup_pid = pid;
+}

clientserver.c

@@ -24,6 +24,7 @@ extern int module_id;
 extern int read_only;
 extern int verbose;
 extern int rsync_port;
+char *auth_user;
 
 int start_socket_client(char *host, char *path, int argc, char *argv[])
 {
@@ -33,6 +34,13 @@ int start_socket_client(char *host, char *path, int argc, char *argv[])
 	char line[MAXPATHLEN];
 	char *p, *user=NULL;
 	extern int remote_version;
+	extern int am_client;
+	extern int am_sender;
+
+	if (*path == '/') {
+		rprintf(FERROR,"ERROR: The remote path must start with a module name\n");
+		return -1;
+	}
 
 	p = strchr(host, '@');
 	if (p) {
@@ -44,9 +52,11 @@ int start_socket_client(char *host, char *path, int argc, char *argv[])
 	if (!user) user = getenv("USER");
 	if (!user) user = getenv("LOGNAME");
 
+	am_client = 1;
+
 	fd = open_socket_out(host, rsync_port);
 	if (fd == -1) {
-		exit_cleanup(1);
+		exit_cleanup(RERR_SOCKETIO);
 	}
 	
 	server_options(sargs,&sargc);
@@ -92,6 +102,9 @@ int start_socket_client(char *host, char *path, int argc, char *argv[])
 	}
 	io_printf(fd,"\n");
 
+	if (remote_version > 17 && !am_sender)
+		io_start_multiplex_in(fd);
+
 	return client_run(fd, fd, -1, argc, argv);
 }
 
@@ -109,7 +122,13 @@ static int rsync_module(int fd, int i)
 	char *addr = client_addr(fd);
 	char *host = client_name(fd);
 	char *name = lp_name(i);
+	int use_chroot = lp_use_chroot(i);
 	int start_glob=0;
+	int ret;
+	char *request=NULL;
+	extern int am_sender;
+	extern int remote_version;
+	extern int am_root;
 
 	if (!allow_access(addr, host, lp_hosts_allow(i), lp_hosts_deny(i))) {
 		rprintf(FERROR,"rsync denied on module %s from %s (%s)\n",
@@ -119,21 +138,30 @@ static int rsync_module(int fd, int i)
 		return -1;
 	}
 
-	if (!auth_server(fd, i, addr, "@RSYNCD: AUTHREQD ")) {
+	if (!claim_connection(lp_lock_file(), lp_max_connections())) {
+		if (errno) {
+			rprintf(FERROR,"failed to open lock file %s : %s\n",
+				lp_lock_file(), strerror(errno));
+			io_printf(fd,"@ERROR: failed to open lock file %s : %s\n",
+				  lp_lock_file(), strerror(errno));
+		} else {
+			rprintf(FERROR,"max connections (%d) reached\n",
+				lp_max_connections());
+			io_printf(fd,"@ERROR: max connections (%d) reached - try again later\n", lp_max_connections());
+		}
+		return -1;
+	}
+
+	
+	auth_user = auth_server(fd, i, addr, "@RSYNCD: AUTHREQD ");
+
+	if (!auth_user) {
 		rprintf(FERROR,"auth failed on module %s from %s (%s)\n",
 			name, client_name(fd), client_addr(fd));
 		io_printf(fd,"@ERROR: auth failed on module %s\n",name);
 		return -1;		
 	}
 
-	if (!claim_connection(lp_lock_file(), lp_max_connections())) {
-		rprintf(FERROR,"max connections (%d) reached\n",
-			lp_max_connections());
-		io_printf(fd,"@ERROR: max connections (%d) reached - try again later\n", lp_max_connections());
-		return -1;
-	}
-
-	
 	module_id = i;
 
 	if (lp_read_only(i))
@@ -160,36 +188,47 @@ static int rsync_module(int fd, int i)
 	}
 
 	p = lp_exclude_from(i);
-	add_exclude_file(p, 1);
+	add_exclude_file(p, 1, 0);
 
 	p = lp_exclude(i);
 	add_exclude_line(p);
 
 	log_open();
 
-	if (chroot(lp_path(i))) {
-		rprintf(FERROR,"chroot %s failed\n", lp_path(i));
-		io_printf(fd,"@ERROR: chroot failed\n");
-		return -1;
+	if (use_chroot) {
+		if (chroot(lp_path(i))) {
+			rprintf(FERROR,"chroot %s failed\n", lp_path(i));
+			io_printf(fd,"@ERROR: chroot failed\n");
+			return -1;
+		}
+
+		if (chdir("/")) {
+			rprintf(FERROR,"chdir %s failed\n", lp_path(i));
+			io_printf(fd,"@ERROR: chdir failed\n");
+			return -1;
+		}
+
+		if (setgid(gid) || getgid() != gid) {
+			rprintf(FERROR,"setgid %d failed\n", gid);
+			io_printf(fd,"@ERROR: setgid failed\n");
+			return -1;
+		}
+
+		if (setuid(uid) || getuid() != uid) {
+			rprintf(FERROR,"setuid %d failed\n", uid);
+			io_printf(fd,"@ERROR: setuid failed\n");
+			return -1;
+		}
+
+	} else {
+		if (!push_dir(lp_path(i), 0)) {
+			rprintf(FERROR,"chdir %s failed\n", lp_path(i));
+			io_printf(fd,"@ERROR: chdir failed\n");
+			return -1;
+		}
 	}
 
-	if (chdir("/")) {
-		rprintf(FERROR,"chdir %s failed\n", lp_path(i));
-		io_printf(fd,"@ERROR: chdir failed\n");
-		return -1;
-	}
-
-	if (setgid(gid) || getgid() != gid) {
-		rprintf(FERROR,"setgid %d failed\n", gid);
-		io_printf(fd,"@ERROR: setgid failed\n");
-		return -1;
-	}
-
-	if (setuid(uid) || getuid() != uid) {
-		rprintf(FERROR,"setuid %d failed\n", uid);
-		io_printf(fd,"@ERROR: setuid failed\n");
-		return -1;
-	}
+	am_root = (getuid() == 0);
 
 	io_printf(fd,"@RSYNCD: OK\n");
 
@@ -211,8 +250,7 @@ static int rsync_module(int fd, int i)
 
 		if (start_glob) {
 			if (start_glob == 1) {
-				rprintf(FINFO,"rsync on %s from %s (%s)\n",
-					p, host, addr);
+				request = strdup(p);
 				start_glob++;
 			}
 			glob_expand(name, argv, &argc, MAX_ARGS);
@@ -229,15 +267,53 @@ static int rsync_module(int fd, int i)
 		}
 	}
 
-	parse_arguments(argc, argv);
+	if (!use_chroot) {
+		/*
+		 * Note that this is applied to all parameters, whether or not
+		 *    they are filenames, but no other legal parameters contain
+		 *    the forms that need to be sanitized so it doesn't hurt;
+		 *    it is not known at this point which parameters are files
+		 *    and which aren't.
+		 */
+		for (i = 1; i < argc; i++) {
+			char *copy = sanitize_path(argv[i]);
+			free((void *)argv[i]);
+			argv[i] = copy;
+		}
+	}
 
+	ret = parse_arguments(argc, argv);
+
+	if (request) {
+		if (*auth_user) {
+			rprintf(FINFO,"rsync %s %s from %s@%s (%s)\n",
+				am_sender?"on":"to",
+				request, auth_user, host, addr);
+		} else {
+			rprintf(FINFO,"rsync %s %s from %s (%s)\n",
+				am_sender?"on":"to",
+				request, host, addr);
+		}
+		free(request);
+	}
+
+#if !TRIDGE
 	/* don't allow the logs to be flooded too fast */
 	if (verbose > 1) verbose = 1;
+#endif
 
 	argc -= optind;
 	argp = argv + optind;
 	optind = 0;
 
+	if (remote_version > 17 && am_sender)
+		io_start_multiplex_out(fd);
+
+	if (!ret) {
+		rprintf(FERROR,"Error parsing options (unsupported option?) - aborting\n");
+		exit_cleanup(RERR_SYNTAX);
+	}
+
 	start_server(fd, fd, argc, argp);
 
 	return 0;
@@ -267,15 +343,17 @@ static int start_daemon(int fd)
 	extern int remote_version;
 
 	if (!lp_load(config_file, 0)) {
-		exit_cleanup(1);
+		exit_cleanup(RERR_SYNTAX);
 	}
 
 	set_socket_options(fd,"SO_KEEPALIVE");
+	set_socket_options(fd,lp_socket_options());
+	
 
 	io_printf(fd,"@RSYNCD: %d\n", PROTOCOL_VERSION);
 
 	motd = lp_motd_file();
-	if (*motd) {
+	if (motd && *motd) {
 		FILE *f = fopen(motd,"r");
 		while (f && !feof(f)) {
 			int len = fread(line, 1, sizeof(line)-1, f);
@@ -328,9 +406,26 @@ static int start_daemon(int fd)
 int daemon_main(void)
 {
 	extern char *config_file;
+	char *pid_file;
+
+	/* this ensures that we don't call getcwd after the chroot,
+           which doesn't work on platforms that use popen("pwd","r")
+           for getcwd */
+	push_dir("/", 0);
 
 	if (is_a_socket(STDIN_FILENO)) {
-		/* we are running via inetd */
+		int i;
+
+		/* we are running via inetd - close off stdout and
+		   stderr so that library functions (and getopt) don't
+		   try to use them. Redirect them to /dev/null */
+		for (i=1;i<3;i++) {
+			close(i); 
+			open("/dev/null", O_RDWR);
+		}
+
+		set_nonblocking(STDIN_FILENO);
+
 		return start_daemon(STDIN_FILENO);
 	}
 
@@ -338,13 +433,26 @@ int daemon_main(void)
 
 	if (!lp_load(config_file, 1)) {
 		fprintf(stderr,"failed to load config file %s\n", config_file);
-		exit_cleanup(1);
+		exit_cleanup(RERR_SYNTAX);
 	}
 
 	log_open();
 
 	rprintf(FINFO,"rsyncd version %s starting\n",VERSION);
 
+	if (((pid_file = lp_pid_file()) != NULL) && (*pid_file != '\0')) {
+		FILE *f;
+		int pid = (int) getpid();
+		cleanup_set_pid(pid);
+		if ((f = fopen(lp_pid_file(), "w")) == NULL) {
+		    cleanup_set_pid(0);
+		    fprintf(stderr,"failed to create pid file %s\n", pid_file);
+		    exit_cleanup(RERR_FILEIO);
+		}
+		fprintf(f, "%d\n", pid);
+		fclose(f);
+	}
+
 	start_accept_loop(rsync_port, start_daemon);
 	return -1;
 }

compat.c

@@ -44,10 +44,8 @@ void setup_protocol(int f_out,int f_in)
 		if (am_server) {
 			remote_version = read_int(f_in);
 			write_int(f_out,PROTOCOL_VERSION);
-			write_flush(f_out);
 		} else {
 			write_int(f_out,PROTOCOL_VERSION);
-			write_flush(f_out);
 			remote_version = read_int(f_in);
 		}
 	}
@@ -55,7 +53,8 @@ void setup_protocol(int f_out,int f_in)
 	if (remote_version < MIN_PROTOCOL_VERSION ||
 	    remote_version > MAX_PROTOCOL_VERSION) {
 		rprintf(FERROR,"protocol version mismatch - is your shell clean?\n");
-		exit_cleanup(1);
+		rprintf(FERROR,"(see the rsync man page for an explanation)\n");
+		exit_cleanup(RERR_PROTOCOL);
 	}	
 	
 	if (verbose > 2)

config.guess

@@ -0,0 +1,627 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright (C) 1992, 93, 94, 95, 1996 Free Software Foundation, Inc.
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Written by Per Bothner <bothner@cygnus.com>.
+# The master version of this file is at the FSF in /home/gd/gnu/lib.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit system type (host/target name).
+#
+# Only a few systems have been added to this list; please add others
+# (but try to keep the structure clean).
+#
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 8/24/94.)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    news*:NEWS-OS:6.*:*)
+        echo mips-sony-newsos6
+        exit 0 ;;
+    alpha:OSF1:*:*)
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	echo alpha-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//'`
+	exit 0 ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit 0 ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-cbm-sysv4
+	exit 0;;
+    amiga:NetBSD:*:*)
+      echo m68k-cbm-netbsd${UNAME_RELEASE}
+      exit 0 ;;
+    amiga:OpenBSD:*:*)
+      echo m68k-cbm-openbsd${UNAME_RELEASE}
+      exit 0 ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit 0;;
+    Pyramid*:OSx*:*:*)
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit 0 ;;
+    sun4*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    i86pc:SunOS:5.*:*)
+	echo i386-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit 0 ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit 0 ;;
+    atari*:NetBSD:*:*)
+	echo m68k-atari-netbsd${UNAME_RELEASE}
+	exit 0 ;;
+    atari*:OpenBSD:*:*)
+	echo m68k-atari-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sun3*:NetBSD:*:*)
+	echo m68k-sun-netbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sun3*:OpenBSD:*:*)
+	echo m68k-sun-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mac68k:NetBSD:*:*)
+	echo m68k-apple-netbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mac68k:OpenBSD:*:*)
+	echo m68k-apple-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit 0 ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit 0 ;;
+    mips:*:4*:UMIPS)
+	echo mips-mips-riscos4sysv
+	exit 0 ;;
+    mips:*:5*:RISCos)
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit 0 ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit 0 ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit 0 ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit 0 ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit 0 ;;
+    AViiON:dgux:*:*)
+        # DG/UX returns AViiON for all architectures
+        UNAME_PROCESSOR=`/usr/bin/uname -p`
+        if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then
+	if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
+	     -o ${TARGET_BINARY_INTERFACE}x = x ] ; then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	fi
+        else echo i586-dg-dgux${UNAME_RELEASE}
+        fi
+ 	exit 0 ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit 0 ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit 0 ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit 0 ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit 0 ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit 0 ;;
+   ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
+	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
+    i[34]86:AIX:*:*)
+	echo i386-ibm-aix
+	exit 0 ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		sed 's/^		//' << EOF >dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
+		rm -f dummy.c dummy
+		echo rs6000-ibm-aix3.2.5
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit 0 ;;
+    *:AIX:*:4)
+	if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=4.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit 0 ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit 0 ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit 0 ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC NetBSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to 
+	exit 0 ;;                           # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit 0 ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit 0 ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit 0 ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit 0 ;;
+    9000/[3478]??:HP-UX:*:*)
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/7?? | 9000/8?[679] ) HP_ARCH=hppa1.1 ;;
+	    9000/8?? )            HP_ARCH=hppa1.0 ;;
+	esac
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit 0 ;;
+    3050*:HI-UX:*:*)
+	sed 's/^	//' << EOF >dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
+	rm -f dummy.c dummy
+	echo unknown-hitachi-hiuxwe2
+	exit 0 ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit 0 ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit 0 ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit 0 ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit 0 ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit 0 ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+        exit 0 ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+        exit 0 ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+        exit 0 ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+        exit 0 ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+        exit 0 ;;
+    CRAY*T3E:*:*:*)
+        echo t3e-cray-unicos_mk
+        exit 0 ;;
+    CRAY*X-MP:*:*:*)
+	echo xmp-cray-unicos
+        exit 0 ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE}
+	exit 0 ;;
+    CRAY*C90:*:*:*)
+	echo c90-cray-unicos${UNAME_RELEASE}
+	exit 0 ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE}
+	exit 0 ;;
+    CRAY-2:*:*:*)
+	echo cray2-cray-unicos
+        exit 0 ;;
+    hp3[0-9][05]:NetBSD:*:*)
+	echo m68k-hp-netbsd${UNAME_RELEASE}
+	exit 0 ;;
+    hp3[0-9][05]:OpenBSD:*:*)
+	echo m68k-hp-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    i[34]86:BSD/386:*:* | *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit 0 ;;
+    *:FreeBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit 0 ;;
+    *:NetBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	exit 0 ;;
+    *:OpenBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	exit 0 ;;
+    i*:CYGWIN*:*)
+	echo i386-unknown-cygwin32
+	exit 0 ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin32
+	exit 0 ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    *:GNU:*:*)
+	echo `echo ${UNAME_MACHINE}|sed -e 's,/.*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit 0 ;;
+    *:Linux:*:*)
+	# The BFD linker knows what the default object file format is, so
+	# first see if it will tell us.
+	ld_help_string=`ld --help 2>&1`
+	if echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: elf_i[345]86"; then
+	  echo "${UNAME_MACHINE}-unknown-linux" ; exit 0
+	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: i[345]86linux"; then
+	  echo "${UNAME_MACHINE}-unknown-linuxaout" ; exit 0
+	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: i[345]86coff"; then
+	  echo "${UNAME_MACHINE}-unknown-linuxcoff" ; exit 0
+	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: m68kelf"; then
+	  echo "${UNAME_MACHINE}-unknown-linux" ; exit 0
+	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: m68klinux"; then
+	  echo "${UNAME_MACHINE}-unknown-linuxaout" ; exit 0
+	elif test "${UNAME_MACHINE}" = "alpha" ; then
+	  echo alpha-unknown-linux ; exit 0
+	else
+	  # Either a pre-BFD a.out linker (linuxoldld) or one that does not give us
+	  # useful --help.  Gcc wants to distinguish between linuxoldld and linuxaout.
+	  test ! -d /usr/lib/ldscripts/. \
+	    && echo "${UNAME_MACHINE}-unknown-linuxoldld" && exit 0
+	  # Determine whether the default compiler is a.out or elf
+	  cat >dummy.c <<EOF
+main(argc, argv)
+int argc;
+char *argv[];
+{
+#ifdef __ELF__
+  printf ("%s-unknown-linux\n", argv[1]);
+#else
+  printf ("%s-unknown-linuxaout\n", argv[1]);
+#endif
+  return 0;
+}
+EOF
+	  ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
+	  rm -f dummy.c dummy
+	fi ;;
+# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.  earlier versions
+# are messed up and put the nodename in both sysname and nodename.
+    i[34]86:DYNIX/ptx:4*:*)
+	echo i386-sequent-sysv4
+	exit 0 ;;
+    i[34]86:*:4.*:* | i[34]86:SYSTEM_V:4.*:*)
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
+	else
+		echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}
+	fi
+	exit 0 ;;
+    i[34]86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-unknown-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		echo ${UNAME_MACHINE}-unknown-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-unknown-sysv32
+	fi
+	exit 0 ;;
+    Intel:Mach:3*:*)
+	echo i386-unknown-mach3
+	exit 0 ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit 0 ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit 0 ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit 0 ;;
+    M680[234]0:*:R3V[567]*:*)
+	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+    3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0)
+        uname -p 2>/dev/null | grep 86 >/dev/null \
+          && echo i486-ncr-sysv4.3 && exit 0 ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+        uname -p 2>/dev/null | grep 86 >/dev/null \
+          && echo i486-ncr-sysv4 && exit 0 ;;
+    m680[234]0:LynxOS:2.[23]*:*)
+	echo m68k-lynx-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit 0 ;;
+    i[34]86:LynxOS:2.[23]*:*)
+	echo i386-lynx-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    TSUNAMI:LynxOS:2.[23]*:*)
+	echo sparc-lynx-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    rs6000:LynxOS:2.[23]*:*)
+	echo rs6000-lynx-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit 0 ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit 0 ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit 0 ;;
+    R3000:*System_V*:*:*)
+	if [ -d /usr/nec ]; then
+	        echo mips-nec-sysv${UNAME_RELEASE}
+	else
+	        echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+        exit 0 ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+cat >dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+          "4"
+#else
+	  ""
+#endif
+         ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  printf ("%s-next-nextstep%s\n", __ARCHITECTURE__,  version==2 ? "2" : "3");
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-unknown-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+	printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+	printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+#if !defined (ultrix)
+  printf ("vax-dec-bsd\n"); exit (0);
+#else
+  printf ("vax-dec-ultrix\n"); exit (0);
+#endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0
+rm -f dummy.c dummy
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+	echo c1-convex-bsd
+	exit 0 ;;
+    c2*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit 0 ;;
+    c34*)
+	echo c34-convex-bsd
+	exit 0 ;;
+    c38*)
+	echo c38-convex-bsd
+	exit 0 ;;
+    c4*)
+	echo c4-convex-bsd
+	exit 0 ;;
+    esac
+fi
+
+#echo '(Unable to guess system type)' 1>&2
+
+exit 1

configure.in

@@ -2,6 +2,9 @@ dnl Process this file with autoconf to produce a configure script.
 AC_INIT(byteorder.h)
 AC_CONFIG_HEADER(config.h)
 
+AC_CANONICAL_SYSTEM
+AC_VALIDATE_CACHE_SYSTEM_TYPE
+
 dnl Checks for programs.
 AC_PROG_CC
 AC_PROG_INSTALL
@@ -10,12 +13,14 @@ AC_SUBST(SHELL)
 AC_CHECK_PROG(HAVE_REMSH, remsh, 1, 0)
 AC_DEFINE_UNQUOTED(HAVE_REMSH, $HAVE_REMSH)
 
+AC_C_BIGENDIAN
 AC_HEADER_DIRENT
 AC_HEADER_TIME
 AC_HEADER_SYS_WAIT
 AC_CHECK_HEADERS(sys/fcntl.h sys/select.h fcntl.h sys/time.h sys/unistd.h unistd.h utime.h grp.h)
 AC_CHECK_HEADERS(compat.h sys/param.h ctype.h sys/wait.h sys/ioctl.h)
 AC_CHECK_HEADERS(sys/filio.h string.h stdlib.h sys/socket.h sys/mode.h)
+AC_CHECK_HEADERS(glob.h)
 
 AC_CHECK_SIZEOF(int)
 AC_CHECK_SIZEOF(long)
@@ -32,17 +37,18 @@ AC_TYPE_PID_T
 AC_STRUCT_ST_RDEV
 AC_CHECK_TYPE(ino_t,unsigned)
 
-echo $ac_n "checking for errno in errno.h... $ac_c"
-AC_TRY_COMPILE([#include <errno.h>],[int i = errno],
-echo yes; AC_DEFINE(HAVE_ERRNO_DECL),
-echo no)
+AC_CACHE_CHECK([for errno in errno.h],rsync_cv_errno, [
+    AC_TRY_COMPILE([#include <errno.h>],[int i = errno],
+	rsync_cv_errno=yes,rsync_cv_have_errno_decl=no)])
+if test x"$rsync_cv_errno" = x"yes"; then
+   AC_DEFINE(HAVE_ERRNO_DECL)
+fi
 
 AC_FUNC_MEMCMP
-AC_FUNC_MMAP
 AC_FUNC_UTIME_NULL
-AC_CHECK_FUNCS(waitpid strtok pipe getcwd mkdir strdup strerror chown chmod mknod)
-AC_CHECK_FUNCS(fchmod fstat strchr bcopy bzero readlink link utime utimes)
-AC_CHECK_FUNCS(memmove getopt_long lchown setlinebuf vsnprintf setsid glob)
+AC_CHECK_FUNCS(mmap munmap waitpid getcwd strdup strerror chown chmod mknod)
+AC_CHECK_FUNCS(fchmod fstat strchr readlink link utime utimes strftime)
+AC_CHECK_FUNCS(memmove getopt_long lchown vsnprintf snprintf setsid glob strpbrk)
 
 echo $ac_n "checking for working fnmatch... $ac_c"
 AC_TRY_RUN([#include <fnmatch.h>
@@ -50,40 +56,73 @@ main() { exit(fnmatch("*.o", "x.o", 0) == 0? 0: 1); }],
 echo yes;AC_DEFINE(HAVE_FNMATCH), 
 echo no)
 
-echo $ac_n "checking for long long ... $ac_c"
+AC_CACHE_CHECK([for long long],rsync_cv_have_longlong,[
 AC_TRY_RUN([#include <stdio.h>
 main() { long long x = 1000000; x *= x; exit(((x/1000000) == 1000000)? 0: 1); }],
-echo yes;AC_DEFINE(HAVE_LONGLONG), 
-echo no)
+rsync_cv_have_longlong=yes,rsync_cv_have_longlong=no,rsync_cv_have_longlong=cross)])
+if test x"$rsync_cv_have_longlong" = x"yes"; then
+    AC_DEFINE(HAVE_LONGLONG)
+fi
 
-echo $ac_n "checking for off64_t ... $ac_c"
+AC_CACHE_CHECK([for off64_t],rsync_cv_HAVE_OFF64_T,[
 AC_TRY_RUN([#include <stdio.h>
 #include <sys/stat.h>
-main() { struct stat64 st; off64_t s; if (sizeof(off_t) == sizeof(off64_t)) return 1; exit((lstat64("/dev/null", &st)==0)?0:1); }],
-echo yes;AC_DEFINE(HAVE_OFF64_T), 
+main() { struct stat64 st; off64_t s; if (sizeof(off_t) == sizeof(off64_t)) exit(1); exit((lstat64("/dev/null", &st)==0)?0:1); }],
+rsync_cv_HAVE_OFF64_T=yes,rsync_cv_HAVE_OFF64_T=no,rsync_cv_HAVE_OFF64_T=cross)])
+if test x"$rsync_cv_HAVE_OFF64_T" = x"yes"; then
+    AC_DEFINE(HAVE_OFF64_T)
+fi
+
+echo $ac_n "checking for short ino_t ... $ac_c"
+AC_TRY_RUN([#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+main() { if (sizeof(ino_t) < sizeof(unsigned int)) return 0; return 1; }],
+echo yes;AC_DEFINE(HAVE_SHORT_INO_T), 
 echo no)
 
-echo $ac_n "checking for unsigned char ... $ac_c"
+AC_CACHE_CHECK([for unsigned char],rsync_cv_HAVE_UNSIGNED_CHAR,[
 AC_TRY_RUN([#include <stdio.h>
 main() { char c; c=250; exit((c > 0)?0:1); }],
-echo yes;AC_DEFINE(HAVE_UNSIGNED_CHAR), 
-echo no)
+rsync_cv_HAVE_UNSIGNED_CHAR=yes,rsync_cv_HAVE_UNSIGNED_CHAR=no,rsync_cv_HAVE_UNSIGNED_CHAR=cross)])
+if test x"$rsync_cv_HAVE_UNSIGNED_CHAR" = x"yes"; then
+    AC_DEFINE(HAVE_UNSIGNED_CHAR)
+fi
 
-echo $ac_n "checking for broken readdir ... $ac_c"
+AC_CACHE_CHECK([for broken readdir],rsync_cv_HAVE_BROKEN_READDIR,[
 AC_TRY_RUN([#include <sys/types.h>
 #include <dirent.h>
 main() { struct dirent *di; DIR *d = opendir("."); di = readdir(d);
 if (di && di->d_name[-2] == '.' && di->d_name[-1] == 0 &&
-di->d_name[0] == 0) return 0; return 1;} ],
-echo yes - you are using the broken /usr/ucb/cc;AC_DEFINE(HAVE_BROKEN_READDIR), 
-echo no)
+di->d_name[0] == 0) exit(0); exit(1);} ],
+rsync_cv_HAVE_BROKEN_READDIR=yes,rsync_cv_HAVE_BROKEN_READDIR=no,rsync_cv_HAVE_BROKEN_READDIR=cross)])
+if test x"$rsync_cv_HAVE_BROKEN_READDIR" = x"yes"; then
+    AC_DEFINE(HAVE_BROKEN_READDIR)
+fi
 
-echo $ac_n "checking for utimbuf ... $ac_c"
+AC_CACHE_CHECK([for utimbuf],rsync_cv_HAVE_UTIMBUF,[
 AC_TRY_COMPILE([#include <sys/types.h>
 #include <utime.h>],
-[struct utimbuf tbuf;  tbuf.actime = 0; tbuf.modtime = 1; return utime("foo.c",&tbuf);],
-echo yes;AC_DEFINE(HAVE_UTIMBUF), 
-echo no)
+[struct utimbuf tbuf;  tbuf.actime = 0; tbuf.modtime = 1; exit(utime("foo.c",&tbuf));],
+rsync_cv_HAVE_UTIMBUF=yes,rsync_cv_HAVE_UTIMBUF=no,rsync_cv_HAVE_UTIMBUF=cross)])
+if test x"$rsync_cv_HAVE_UTIMBUF" = x"yes"; then
+    AC_DEFINE(HAVE_UTIMBUF)
+fi
+
+AC_CACHE_CHECK([for broken inet_ntoa],rsync_cv_REPLACE_INET_NTOA,[
+AC_TRY_RUN([
+#include <stdio.h>
+#include <sys/types.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+main() { struct in_addr ip; ip.s_addr = 0x12345678;
+if (strcmp(inet_ntoa(ip),"18.52.86.120") &&
+    strcmp(inet_ntoa(ip),"120.86.52.18")) { exit(0); } 
+exit(1);}],
+           rsync_cv_REPLACE_INET_NTOA=yes,rsync_cv_REPLACE_INET_NTOA=no,rsync_cv_REPLACE_INET_NTOA=cross)])
+if test x"$rsync_cv_REPLACE_INET_NTOA" = x"yes"; then
+    AC_DEFINE(REPLACE_INET_NTOA)
+fi
 
 # The following test taken from the cvs sources
 # If we can't find connect, try looking in -lsocket, -lnsl, and -linet.
@@ -91,30 +130,58 @@ echo no)
 # libsocket.so which has a bad implementation of gethostbyname (it
 # only looks in /etc/hosts), so we only look for -lsocket if we need
 # it.
-AC_CHECK_FUNC(connect, :, 
-[case "$LIBS" in
-*-lnsl*) ;;
-*) AC_CHECK_LIB(nsl_s, printf) ;;
-esac
-case "$LIBS" in
-*-lnsl*) ;;
-*) AC_CHECK_LIB(nsl, printf) ;;
-esac
-case "$LIBS" in
-*-lsocket*) ;;
-*) AC_CHECK_LIB(socket, connect) ;;
-esac
-case "$LIBS" in
-*-linet*) ;;
-*) AC_CHECK_LIB(inet, connect) ;;
-esac
-dnl We can't just call AC_CHECK_FUNCS(connect) here, because the value
-dnl has been cached.
-if test "$ac_cv_lib_socket_connect" = "yes" || 
-   test "$ac_cv_lib_inet_connect" = "yes"; then
-  ac_cv_func_connect=yes
-  AC_DEFINE(HAVE_CONNECT)
-fi])
+AC_CHECK_FUNCS(connect)
+if test x"$ac_cv_func_connect" = x"no"; then
+    case "$LIBS" in
+    *-lnsl*) ;;
+    *) AC_CHECK_LIB(nsl_s, printf) ;;
+    esac
+    case "$LIBS" in
+    *-lnsl*) ;;
+    *) AC_CHECK_LIB(nsl, printf) ;;
+    esac
+    case "$LIBS" in
+    *-lsocket*) ;;
+    *) AC_CHECK_LIB(socket, connect) ;;
+    esac
+    case "$LIBS" in
+    *-linet*) ;;
+    *) AC_CHECK_LIB(inet, connect) ;;
+    esac
+    dnl We can't just call AC_CHECK_FUNCS(connect) here, because the value
+    dnl has been cached.
+    if test x"$ac_cv_lib_socket_connect" = x"yes" || 
+       test x"$ac_cv_lib_inet_connect" = x"yes"; then
+        # ac_cv_func_connect=yes
+        # don't!  it would cause AC_CHECK_FUNC to succeed next time configure is run
+        AC_DEFINE(HAVE_CONNECT)
+    fi
+fi
+
+#
+# The following test was mostly taken from the tcl/tk plus patches
+#
+echo $ac_n "checking whether -c -o works ... $ac_c"
+rm -rf conftest*
+cat > conftest.$ac_ext <<EOF
+int main() { return 0; }
+EOF
+${CC-cc} -c -o conftest..o conftest.$ac_ext
+if test -f conftest..o; then
+    OBJ_SAVE="#"
+    OBJ_RESTORE="#"
+    CC_SHOBJ_FLAG='-o $@'
+    echo yes
+else
+    OBJ_SAVE='	@b=`basename $@ .o`;rm -f $$b.o.sav;if test -f $$b.o; then mv $$b.o $$b.o.sav;fi;'
+    OBJ_RESTORE='	@b=`basename $@ .o`;if test "$$b.o" != "$@"; then mv $$b.o $@; if test -f $$b.o.sav; then mv $$b.o.sav $$b.o; fi; fi'
+    CC_SHOBJ_FLAG=""
+    echo no
+fi
+rm -rf conftest*
+AC_SUBST(OBJ_SAVE)
+AC_SUBST(OBJ_RESTORE)
+AC_SUBST(CC_SHOBJ_FLAG)
 
 
-AC_OUTPUT(Makefile lib/dummy)
+AC_OUTPUT(Makefile lib/dummy zlib/dummy)

connection.c

@@ -29,7 +29,7 @@ int claim_connection(char *fname,int max_connections)
 
 	if (max_connections <= 0)
 		return 1;
-	
+
 	fd = open(fname,O_RDWR|O_CREAT, 0600);
 
 	if (fd == -1) {
@@ -41,6 +41,9 @@ int claim_connection(char *fname,int max_connections)
 		if (lock_range(fd, i*4, 4)) return 1;
 	}		
 
+	/* only interested in open failures */
+	errno = 0;
+
 	close(fd);
 	return 0;
 }

errcode.h

@@ -0,0 +1,18 @@
+/* error codes returned by rsync */
+
+#define RERR_SYNTAX     1       /* syntax or usage error */
+#define RERR_PROTOCOL   2       /* protocol incompatibility */
+#define RERR_FILESELECT 3       /* errors selecting input/output files, dirs */
+#define RERR_NOSUPPORT  4       /* requested action not supported */
+
+#define RERR_SOCKETIO   10      /* error in socket IO */
+#define RERR_FILEIO     11      /* error in file IO */
+#define RERR_STREAMIO   12      /* error in rsync protocol data stream */
+#define RERR_MESSAGEIO  13      /* errors with program diagnostics */
+#define RERR_IPC        14      /* error in IPC code */
+
+#define RERR_SIGNAL     20      /* status returned when sent SIGUSR1, SIGINT */
+#define RERR_WAITCHILD  21      /* some error returned by waitpid() */
+#define RERR_MALLOC     22      /* error allocating core memory buffers */
+
+#define RERR_TIMEOUT    30      /* timeout in data send/receive */

exclude.c

@@ -17,160 +17,276 @@
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
-/*
-  a lot of this stuff was derived from GNU tar
-  */
+/* a lot of this stuff was originally derived from GNU tar, although
+   it has now changed so much that it is hard to tell :) */
 
 #include "rsync.h"
 
 extern int verbose;
 
-static char **exclude_list;
+static struct exclude_struct **exclude_list;
 
-static int is_regex(char *str)
+/*
+ * Optimization for special case when all included files are explicitly
+ *   listed without wildcards in the "exclude" list followed by a "- *"
+ *   to exclude the rest.
+ * Contributed by Dave Dykstra <dwd@bell-labs.com>
+ */
+static int only_included_files = 1;
+static struct exclude_struct *exclude_the_rest;
+
+int send_included_file_names(int f,struct file_list *flist)
 {
-  return strchr(str, '*') || strchr(str, '[') || strchr(str, '?');
-}
+	struct exclude_struct *ex, **ex_list;
+	int n;
+	char *p;
 
+	if (!only_included_files || (exclude_the_rest == NULL))
+		return 0;
 
-static int check_one_exclude(char *name,char *pattern)
-{
-  char *p;
+	if (verbose > 1) {
+		rprintf(FINFO,"(using include-only optimization) ");
+	}
 
-  if (!strchr(pattern,'/') && (p=strrchr(name,'/')))
-    name = p+1;
-
-  if (!name[0]) return 0;
-
-  if (*pattern == '/' && *name != '/') pattern++;
-
-  if (is_regex(pattern)) {
-    if (fnmatch(pattern, name, 0) == 0)
-      return 1;
-  } else {
-    int l1 = strlen(name);
-    int l2 = strlen(pattern);
-    if (l2 <= l1 && 
-	strcmp(name+(l1-l2),pattern) == 0 &&
-	(l1==l2 || name[l1-(l2+1)] == '/'))
-      return 1;
-  }
-
-  return 0;
-}
-
-
-int check_exclude(char *name,char **local_exclude_list)
-{
-  int n;
-
-  if (exclude_list) {
-    for (n=0; exclude_list[n]; n++)
-      if (check_one_exclude(name,exclude_list[n]))
+	/* set exclude_list to NULL temporarily so check_exclude */
+	/*   will always return true */
+	ex_list = exclude_list;
+	exclude_list = NULL;
+	for (n=0; (ex = ex_list[n]) != NULL; n++) {
+		if (ex == exclude_the_rest)
+			break;
+		p = ex->pattern;
+		while (*p == '/') {
+			/* skip the allowed beginning slashes */
+			p++;
+		}
+		send_file_name(f,flist,p,0,0);
+	}
+	exclude_list = ex_list;
+	
 	return 1;
-  }
-
-  if (local_exclude_list) {
-    for (n=0; local_exclude_list[n]; n++)
-      if (check_one_exclude(name,local_exclude_list[n]))
-	return 1;      
-  }
-
-  return 0;
 }
 
-
-void add_exclude_list(char *pattern,char ***list)
+/* build an exclude structure given a exclude pattern */
+static struct exclude_struct *make_exclude(char *pattern, int include)
 {
-  int len=0;
-  if (list && *list)
-    for (; (*list)[len]; len++) ;
+	struct exclude_struct *ret;
 
-  if (strcmp(pattern,"!") == 0) {
-    if (verbose > 2)
-      rprintf(FINFO,"clearing exclude list\n");
-    while ((len)--) 
-      free((*list)[len]);
-    free((*list));
-    *list = NULL;
-    return;
-  }
+	ret = (struct exclude_struct *)malloc(sizeof(*ret));
+	if (!ret) out_of_memory("make_exclude");
 
-  if (!*list) {
-    *list = (char **)malloc(sizeof(char *)*2);
-  } else {
-    *list = (char **)realloc(*list,sizeof(char *)*(len+2));
-  }
+	memset(ret, 0, sizeof(*ret));
 
-  if (!*list || !((*list)[len] = strdup(pattern)))
-    out_of_memory("add_exclude");
+	if (strncmp(pattern,"- ",2) == 0) {
+		pattern += 2;
+	} else if (strncmp(pattern,"+ ",2) == 0) {
+		ret->include = 1;
+		pattern += 2;
+	} else {
+		ret->include = include;
+	}
 
-  if (verbose > 2)
-    rprintf(FINFO,"add_exclude(%s)\n",pattern);
-  
-  (*list)[len+1] = NULL;
+	ret->pattern = strdup(pattern);
+
+	if (!ret->pattern) out_of_memory("make_exclude");
+
+	if (strpbrk(pattern, "*[?")) {
+	    if (!ret->include && (*pattern == '*') && (*(pattern+1) == '\0')) {
+		    exclude_the_rest = ret;
+	    } else {
+		    only_included_files = 0;
+	    }
+	    ret->regular_exp = 1;
+	} else if (!ret->include) {
+		only_included_files = 0;
+	}
+
+	if (strlen(pattern) > 1 && pattern[strlen(pattern)-1] == '/') {
+		ret->pattern[strlen(pattern)-1] = 0;
+		ret->directory = 1;
+	}
+
+	if (!strchr(ret->pattern,'/')) {
+		ret->local = 1;
+	}
+
+	return ret;
 }
 
-void add_exclude(char *pattern)
+static void free_exclude(struct exclude_struct *ex)
 {
-  add_exclude_list(pattern,&exclude_list);
+	free(ex->pattern);
+	memset(ex,0,sizeof(*ex));
+	free(ex);
 }
 
-char **make_exclude_list(char *fname,char **list1,int fatal)
+static int check_one_exclude(char *name,struct exclude_struct *ex,
+			     STRUCT_STAT *st)
 {
-  char **list=list1;
-  FILE *f = fopen(fname,"r");
-  char line[MAXPATHLEN];
-  if (!f) {
-    if (fatal) {
-      rprintf(FERROR,"%s : %s\n",fname,strerror(errno));
-      exit_cleanup(1);
-    }
-    return list;
-  }
+	char *p;
+	int match_start=0;
+	char *pattern = ex->pattern;
 
-  while (fgets(line,MAXPATHLEN,f)) {
-    int l = strlen(line);
-    if (l && line[l-1] == '\n') l--;
-    line[l] = 0;
-    if (line[0]) add_exclude_list(line,&list);
-  }
-  fclose(f);
-  return list;
+	if (ex->local && (p=strrchr(name,'/')))
+		name = p+1;
+
+	if (!name[0]) return 0;
+
+	if (ex->directory && !S_ISDIR(st->st_mode)) return 0;
+
+	if (*pattern == '/' && *name != '/') {
+		match_start = 1;
+		pattern++;
+	}
+
+	if (ex->regular_exp) {
+		if (fnmatch(pattern, name, 0) == 0)
+			return 1;
+	} else {
+		int l1 = strlen(name);
+		int l2 = strlen(pattern);
+		if (l2 <= l1 && 
+		    strcmp(name+(l1-l2),pattern) == 0 &&
+		    (l1==l2 || (!match_start && name[l1-(l2+1)] == '/')))
+			return 1;
+	}
+
+	return 0;
 }
 
 
-void add_exclude_file(char *fname,int fatal)
+int check_exclude(char *name,struct exclude_struct **local_exclude_list,
+		  STRUCT_STAT *st)
+{
+	int n;
+
+	if (exclude_list) {
+		for (n=0; exclude_list[n]; n++)
+			if (check_one_exclude(name,exclude_list[n],st))
+				return !exclude_list[n]->include;
+	}
+
+	if (local_exclude_list) {
+		for (n=0; local_exclude_list[n]; n++)
+			if (check_one_exclude(name,local_exclude_list[n],st))
+				return !local_exclude_list[n]->include;
+	}
+
+	return 0;
+}
+
+
+void add_exclude_list(char *pattern,struct exclude_struct ***list, int include)
+{
+	int len=0;
+	if (list && *list)
+		for (; (*list)[len]; len++) ;
+
+	if (strcmp(pattern,"!") == 0) {
+		if (verbose > 2)
+			rprintf(FINFO,"clearing exclude list\n");
+		while ((len)--) {
+			free_exclude((*list)[len]);
+		}
+		free((*list));
+		*list = NULL;
+		only_included_files = 1;
+		exclude_the_rest = NULL;
+		return;
+	}
+
+	*list = (struct exclude_struct **)Realloc(*list,sizeof(struct exclude_struct *)*(len+2));
+	
+	if (!*list || !((*list)[len] = make_exclude(pattern, include)))
+		out_of_memory("add_exclude");
+	
+	if (verbose > 2)
+		rprintf(FINFO,"add_exclude(%s)\n",pattern);
+	
+	(*list)[len+1] = NULL;
+}
+
+void add_exclude(char *pattern, int include)
+{
+	add_exclude_list(pattern,&exclude_list, include);
+}
+
+struct exclude_struct **make_exclude_list(char *fname,
+					  struct exclude_struct **list1,
+					  int fatal, int include)
+{
+	struct exclude_struct **list=list1;
+	FILE *f = fopen(fname,"r");
+	char line[MAXPATHLEN];
+	if (!f) {
+		if (fatal) {
+			rprintf(FERROR,"%s : %s\n",fname,strerror(errno));
+			exit_cleanup(RERR_FILEIO);
+		}
+		return list;
+	}
+
+	while (fgets(line,MAXPATHLEN,f)) {
+		int l = strlen(line);
+		if (l && line[l-1] == '\n') l--;
+		line[l] = 0;
+		if (line[0]) add_exclude_list(line,&list,include);
+	}
+	fclose(f);
+	return list;
+}
+
+
+void add_exclude_file(char *fname,int fatal,int include)
 {
 	if (!fname || !*fname) return;
 
-	exclude_list = make_exclude_list(fname,exclude_list,fatal);
+	exclude_list = make_exclude_list(fname,exclude_list,fatal,include);
 }
 
 
 void send_exclude_list(int f)
 {
-  int i;
-  if (exclude_list) 
-    for (i=0;exclude_list[i];i++) {
-      int l = strlen(exclude_list[i]);
-      if (l == 0) continue;
-      write_int(f,l);
-      write_buf(f,exclude_list[i],l);
-    }    
-  write_int(f,0);
+	int i;
+	extern int remote_version;
+
+	if (!exclude_list) {
+		write_int(f,0);
+		return;
+	}
+
+	for (i=0;exclude_list[i];i++) {
+		char *pattern = exclude_list[i]->pattern; 
+		int l;
+
+		l = strlen(pattern);
+		if (l == 0) continue;
+		if (exclude_list[i]->include) {
+			if (remote_version < 19) {
+				rprintf(FERROR,"remote rsync does not support include syntax - aborting\n");
+				exit_cleanup(RERR_NOSUPPORT);
+			}
+			write_int(f,l+2);
+			write_buf(f,"+ ",2);
+		} else {
+			write_int(f,l);
+		}
+		write_buf(f,pattern,l);
+	}    
+
+	write_int(f,0);
 }
 
 
 void recv_exclude_list(int f)
 {
-  char line[MAXPATHLEN];
-  int l;
-  while ((l=read_int(f))) {
-	  if (l >= MAXPATHLEN) overflow("recv_exclude_list");
-	  read_sbuf(f,line,l);
-	  add_exclude(line);
-  }
+	char line[MAXPATHLEN];
+	int l;
+	while ((l=read_int(f))) {
+		if (l >= MAXPATHLEN) overflow("recv_exclude_list");
+		read_sbuf(f,line,l);
+		add_exclude(line,0);
+	}
 }
 
 
@@ -181,7 +297,7 @@ void add_exclude_line(char *p)
 	p = strdup(p);
 	if (!p) out_of_memory("add_exclude_line");
 	for (tok=strtok(p," "); tok; tok=strtok(NULL," "))
-		add_exclude(tok);
+		add_exclude(tok, 0);
 	free(p);
 }
 
@@ -197,17 +313,17 @@ static char *cvs_ignore_list[] = {
 
 void add_cvs_excludes(void)
 {
-  char fname[MAXPATHLEN];
-  char *p;
-  int i;
+	char fname[MAXPATHLEN];
+	char *p;
+	int i;
   
-  for (i=0; cvs_ignore_list[i]; i++)
-    add_exclude(cvs_ignore_list[i]);
+	for (i=0; cvs_ignore_list[i]; i++)
+		add_exclude(cvs_ignore_list[i], 0);
 
-  if ((p=getenv("HOME")) && strlen(p) < (MAXPATHLEN-12)) {
-	  slprintf(fname,sizeof(fname)-1, "%s/.cvsignore",p);
-	  add_exclude_file(fname,0);
-  }
+	if ((p=getenv("HOME")) && strlen(p) < (MAXPATHLEN-12)) {
+		slprintf(fname,sizeof(fname)-1, "%s/.cvsignore",p);
+		add_exclude_file(fname,0,0);
+	}
 
-  add_exclude_line(getenv("CVSIGNORE"));
+	add_exclude_line(getenv("CVSIGNORE"));
 }

fileio.c

@@ -0,0 +1,218 @@
+/* 
+   Copyright (C) Andrew Tridgell 1998
+   
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+   
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+  File IO utilities used in rsync 
+  */
+#include "rsync.h"
+
+static char last_byte;
+static int last_sparse;
+extern int sparse_files;
+
+int sparse_end(int f)
+{
+	if (last_sparse) {
+		do_lseek(f,-1,SEEK_CUR);
+		return (write(f,&last_byte,1) == 1 ? 0 : -1);
+	}
+	last_sparse = 0;
+	return 0;
+}
+
+
+static int write_sparse(int f,char *buf,int len)
+{
+	int l1=0,l2=0;
+	int ret;
+
+	for (l1=0;l1<len && buf[l1]==0;l1++) ;
+	for (l2=0;l2<(len-l1) && buf[len-(l2+1)]==0;l2++) ;
+
+	last_byte = buf[len-1];
+
+	if (l1 == len || l2 > 0)
+		last_sparse=1;
+
+	if (l1 > 0)
+		do_lseek(f,l1,SEEK_CUR);  
+
+	if (l1 == len) 
+		return len;
+
+	if ((ret=write(f,buf+l1,len-(l1+l2))) != len-(l1+l2)) {
+		if (ret == -1 || ret == 0) return ret;
+		return (l1+ret);
+	}
+
+	if (l2 > 0)
+		do_lseek(f,l2,SEEK_CUR);
+	
+	return len;
+}
+
+
+
+int write_file(int f,char *buf,int len)
+{
+	int ret = 0;
+
+	if (!sparse_files) 
+		return write(f,buf,len);
+
+	while (len>0) {
+		int len1 = MIN(len, SPARSE_WRITE_SIZE);
+		int r1 = write_sparse(f, buf, len1);
+		if (r1 <= 0) {
+			if (ret > 0) return ret;
+			return r1;
+		}
+		len -= r1;
+		buf += r1;
+		ret += r1;
+	}
+	return ret;
+}
+
+
+
+struct map_struct *map_file(int fd,OFF_T len)
+{
+	struct map_struct *ret;
+	ret = (struct map_struct *)malloc(sizeof(*ret));
+	if (!ret) out_of_memory("map_file");
+
+	ret->map = NULL;
+	ret->fd = fd;
+	ret->size = len;
+	ret->p = NULL;
+	ret->p_size = 0;
+	ret->p_offset = 0;
+	ret->p_len = 0;
+
+#ifdef USE_MMAP
+	len = MIN(len, MAX_MAP_SIZE);
+	ret->map = (char *)do_mmap(NULL,len,PROT_READ,MAP_SHARED,fd,0);
+	if (ret->map == (char *)-1) {
+		ret->map = NULL;
+	} else {
+		ret->p_len = len;
+	}
+#endif
+	return ret;
+}
+
+
+char *map_ptr(struct map_struct *map,OFF_T offset,int len)
+{
+	int nread;
+
+	if (len == 0) 
+		return NULL;
+
+	if (len > (map->size-offset))
+		len = map->size-offset;
+
+#ifdef USE_MMAP
+	if (map->map) {
+		if (offset >= map->p_offset && 
+		    offset+len <= map->p_offset+map->p_len) {
+			return (map->map + (offset - map->p_offset));
+		}
+		if (munmap(map->map, map->p_len) != 0) {
+			rprintf(FERROR,"munmap failed : %s\n", strerror(errno));
+			exit_cleanup(RERR_MALLOC);
+		}
+
+		/* align the mmap region on a nice boundary back a bit from
+		   where it is asked for to allow for some seeking */
+		if (offset > 2*CHUNK_SIZE) {
+			map->p_offset = offset - 2*CHUNK_SIZE;
+			map->p_offset &= ~((OFF_T)(CHUNK_SIZE-1));
+		} else {
+			map->p_offset = 0;
+		}
+		
+		/* map up to MAX_MAP_SIZE */
+		map->p_len = MAX(len, MAX_MAP_SIZE);
+		map->p_len = MIN(map->p_len, map->size - map->p_offset);
+
+		map->map = (char *)do_mmap(NULL,map->p_len,PROT_READ,
+					   MAP_SHARED,map->fd,map->p_offset);
+
+		if (map->map == (char *)-1) {
+			map->map = NULL;
+			map->p_len = 0;
+			map->p_offset = 0;
+		} else {
+			return (map->map + (offset - map->p_offset));
+		}
+	}
+#endif
+
+	if (offset >= map->p_offset && 
+	    offset+len <= map->p_offset+map->p_len) {
+		return (map->p + (offset - map->p_offset));
+	}
+
+	len = MAX(len,CHUNK_SIZE);
+	if (len > (map->size-offset))
+		len = map->size-offset;
+
+	if (len > map->p_size) {
+		if (map->p) free(map->p);
+		map->p = (char *)malloc(len);
+		if (!map->p) out_of_memory("map_ptr");
+		map->p_size = len;
+	}
+
+	map->p_offset = offset;
+	map->p_len = len;
+
+	if (do_lseek(map->fd,offset,SEEK_SET) != offset) {
+		rprintf(FERROR,"lseek failed in map_ptr\n");
+		exit_cleanup(RERR_FILEIO);
+	}
+
+	if ((nread=read(map->fd,map->p,len)) != len) {		
+		if (nread < 0) nread = 0;
+		/* the best we can do is zero the buffer - the file
+                   has changed mid transfer! */
+		memset(map->p+nread, 0, len - nread);
+	}
+  
+	return map->p; 
+}
+
+
+void unmap_file(struct map_struct *map)
+{
+#ifdef USE_MMAP
+	if (map->map) {
+		munmap(map->map,map->p_len);
+		map->map = NULL;
+	}
+#endif
+	if (map->p) {
+		free(map->p);
+		map->p = NULL;
+	}
+	memset(map, 0, sizeof(*map));
+	free(map);
+}
+

flist.c

@@ -21,12 +21,13 @@
 
 #include "rsync.h"
 
+extern struct stats stats;
+
 extern int csum_length;
 
 extern int verbose;
 extern int am_server;
 extern int always_checksum;
-extern int64 total_size;
 
 extern int cvs_exclude;
 
@@ -46,7 +47,39 @@ extern int copy_links;
 extern int remote_version;
 extern int io_error;
 
-static char **local_exclude_list;
+static struct exclude_struct **local_exclude_list;
+
+static void clean_flist(struct file_list *flist, int strip_root);
+
+
+static void list_file_entry(struct file_struct *f)
+{
+	char perms[11] = "----------";
+	char *perm_map = "rwxrwxrwx";
+	int i;
+
+	for (i=0;i<9;i++) {
+		if (f->mode & (1<<i)) perms[9-i] = perm_map[8-i];
+	}
+	if (S_ISLNK(f->mode)) perms[0] = 'l';
+	if (S_ISDIR(f->mode)) perms[0] = 'd';
+	if (S_ISBLK(f->mode)) perms[0] = 'b';
+	if (S_ISCHR(f->mode)) perms[0] = 'c';
+	if (S_ISSOCK(f->mode)) perms[0] = 's';
+	if (S_ISFIFO(f->mode)) perms[0] = 'p';
+	
+	if (preserve_links && S_ISLNK(f->mode)) {
+		rprintf(FINFO,"%s %11.0f %s %s -> %s\n", 
+			perms, 
+			(double)f->length, timestring(f->modtime), 
+			f_name(f), f->link);
+	} else {
+		rprintf(FINFO,"%s %11.0f %s %s\n", 
+			perms, 
+			(double)f->length, timestring(f->modtime), f_name(f));
+	}
+}
+
 
 int link_stat(const char *Path, STRUCT_STAT *Buffer) 
 {
@@ -67,7 +100,7 @@ int link_stat(const char *Path, STRUCT_STAT *Buffer)
  */
 static int match_file_name(char *fname,STRUCT_STAT *st)
 {
-  if (check_exclude(fname,local_exclude_list)) {
+  if (check_exclude(fname,local_exclude_list,st)) {
     if (verbose > 2)
       rprintf(FINFO,"excluding file %s\n",fname);
     return 0;
@@ -86,140 +119,119 @@ static void set_filesystem(char *fname)
 }
 
 
+static int to_wire_mode(mode_t mode)
+{
+	if (S_ISLNK(mode) && (S_IFLNK != 0120000)) {
+		return (mode & ~(_S_IFMT)) | 0120000;
+	}
+	return (int)mode;
+}
+
+static mode_t from_wire_mode(int mode)
+{
+	if ((mode & (_S_IFMT)) == 0120000 && (S_IFLNK != 0120000)) {
+		return (mode & ~(_S_IFMT)) | S_IFLNK;
+	}
+	return (mode_t)mode;
+}
+
+
 static void send_directory(int f,struct file_list *flist,char *dir);
 
 static char *flist_dir;
 
-static void clean_fname(char *name)
+
+static void send_file_entry(struct file_struct *file,int f,unsigned base_flags)
 {
-  char *p;
-  int l;
-  int modified = 1;
+	unsigned char flags;
+	static time_t last_time;
+	static mode_t last_mode;
+	static dev_t last_rdev;
+	static uid_t last_uid;
+	static gid_t last_gid;
+	static char lastname[MAXPATHLEN];
+	char *fname;
+	int l1,l2;
 
-  if (!name) return;
+	if (f == -1) return;
 
-  while (modified) {
-    modified = 0;
+	if (!file) {
+		write_byte(f,0);
+		return;
+	}
 
-    if ((p=strstr(name,"/./"))) {
-      modified = 1;
-      while (*p) {
-	p[0] = p[2];
-	p++;
-      }
-    }
+	fname = f_name(file);
 
-    if ((p=strstr(name,"//"))) {
-      modified = 1;
-      while (*p) {
-	p[0] = p[1];
-	p++;
-      }
-    }
+	flags = base_flags;
 
-    if (strncmp(p=name,"./",2) == 0) {      
-      modified = 1;
-      do {
-	p[0] = p[2];
-      } while (*p++);
-    }
+	if (file->mode == last_mode) flags |= SAME_MODE;
+	if (file->rdev == last_rdev) flags |= SAME_RDEV;
+	if (file->uid == last_uid) flags |= SAME_UID;
+	if (file->gid == last_gid) flags |= SAME_GID;
+	if (file->modtime == last_time) flags |= SAME_TIME;
 
-    l = strlen(p=name);
-    if (l > 1 && p[l-1] == '/') {
-      modified = 1;
-      p[l-1] = 0;
-    }
-  }
-}
+	for (l1=0;lastname[l1] && (fname[l1] == lastname[l1]) && (l1 < 255);l1++) ;  
+	l2 = strlen(fname) - l1;
 
+	if (l1 > 0) flags |= SAME_NAME;
+	if (l2 > 255) flags |= LONG_NAME;
 
+	/* we must make sure we don't send a zero flags byte or the other
+	   end will terminate the flist transfer */
+	if (flags == 0 && !S_ISDIR(file->mode)) flags |= FLAG_DELETE;
+	if (flags == 0) flags |= LONG_NAME;
 
-void send_file_entry(struct file_struct *file,int f,unsigned base_flags)
-{
-  unsigned char flags;
-  static time_t last_time;
-  static mode_t last_mode;
-  static dev_t last_rdev;
-  static uid_t last_uid;
-  static gid_t last_gid;
-  static char lastname[MAXPATHLEN];
-  char *fname;
-  int l1,l2;
+	write_byte(f,flags);  
+	if (flags & SAME_NAME)
+		write_byte(f,l1);
+	if (flags & LONG_NAME)
+		write_int(f,l2);
+	else
+		write_byte(f,l2);
+	write_buf(f,fname+l1,l2);
 
-  if (f == -1) return;
-
-  if (!file) {
-    write_byte(f,0);
-    return;
-  }
-
-  fname = f_name(file);
-
-  flags = base_flags;
-
-  if (file->mode == last_mode) flags |= SAME_MODE;
-  if (file->rdev == last_rdev) flags |= SAME_RDEV;
-  if (file->uid == last_uid) flags |= SAME_UID;
-  if (file->gid == last_gid) flags |= SAME_GID;
-  if (file->modtime == last_time) flags |= SAME_TIME;
-
-  for (l1=0;lastname[l1] && fname[l1] == lastname[l1];l1++) ;
-  l2 = strlen(fname) - l1;
-
-  if (l1 > 0) flags |= SAME_NAME;
-  if (l2 > 255) flags |= LONG_NAME;
-
-  write_byte(f,flags);  
-  if (flags & SAME_NAME)
-    write_byte(f,l1);
-  if (flags & LONG_NAME)
-    write_int(f,l2);
-  else
-    write_byte(f,l2);
-  write_buf(f,fname+l1,l2);
-
-  write_longint(f,file->length);
-  if (!(flags & SAME_TIME))
-    write_int(f,(int)file->modtime);
-  if (!(flags & SAME_MODE))
-    write_int(f,(int)file->mode);
-  if (preserve_uid && !(flags & SAME_UID)) {
-	  add_uid(file->uid);
-	  write_int(f,(int)file->uid);
-  }
-  if (preserve_gid && !(flags & SAME_GID)) {
-	  add_gid(file->gid);
-	  write_int(f,(int)file->gid);
-  }
-  if (preserve_devices && IS_DEVICE(file->mode) && !(flags & SAME_RDEV))
-    write_int(f,(int)file->rdev);
+	write_longint(f,file->length);
+	if (!(flags & SAME_TIME))
+		write_int(f,(int)file->modtime);
+	if (!(flags & SAME_MODE))
+		write_int(f,to_wire_mode(file->mode));
+	if (preserve_uid && !(flags & SAME_UID)) {
+		add_uid(file->uid);
+		write_int(f,(int)file->uid);
+	}
+	if (preserve_gid && !(flags & SAME_GID)) {
+		add_gid(file->gid);
+		write_int(f,(int)file->gid);
+	}
+	if (preserve_devices && IS_DEVICE(file->mode) && !(flags & SAME_RDEV))
+		write_int(f,(int)file->rdev);
 
 #if SUPPORT_LINKS
-  if (preserve_links && S_ISLNK(file->mode)) {
-    write_int(f,strlen(file->link));
-    write_buf(f,file->link,strlen(file->link));
-  }
+	if (preserve_links && S_ISLNK(file->mode)) {
+		write_int(f,strlen(file->link));
+		write_buf(f,file->link,strlen(file->link));
+	}
 #endif
 
 #if SUPPORT_HARD_LINKS
-  if (preserve_hard_links && S_ISREG(file->mode)) {
-    write_int(f,(int)file->dev);
-    write_int(f,(int)file->inode);
-  }
+	if (preserve_hard_links && S_ISREG(file->mode)) {
+		write_int(f,(int)file->dev);
+		write_int(f,(int)file->inode);
+	}
 #endif
 
-  if (always_checksum) {
-	  write_buf(f,file->sum,csum_length);
-  }       
+	if (always_checksum) {
+		write_buf(f,file->sum,csum_length);
+	}       
 
-  last_mode = file->mode;
-  last_rdev = file->rdev;
-  last_uid = file->uid;
-  last_gid = file->gid;
-  last_time = file->modtime;
+	last_mode = file->mode;
+	last_rdev = file->rdev;
+	last_uid = file->uid;
+	last_gid = file->gid;
+	last_time = file->modtime;
 
-  strlcpy(lastname,fname,MAXPATHLEN-1);
-  lastname[MAXPATHLEN-1] = 0;
+	strlcpy(lastname,fname,MAXPATHLEN-1);
+	lastname[MAXPATHLEN-1] = 0;
 }
 
 
@@ -227,95 +239,102 @@ void send_file_entry(struct file_struct *file,int f,unsigned base_flags)
 static void receive_file_entry(struct file_struct **fptr,
 			       unsigned flags,int f)
 {
-  static time_t last_time;
-  static mode_t last_mode;
-  static dev_t last_rdev;
-  static uid_t last_uid;
-  static gid_t last_gid;
-  static char lastname[MAXPATHLEN];
-  char thisname[MAXPATHLEN];
-  int l1=0,l2=0;
-  char *p;
-  struct file_struct *file;
+	static time_t last_time;
+	static mode_t last_mode;
+	static dev_t last_rdev;
+	static uid_t last_uid;
+	static gid_t last_gid;
+	static char lastname[MAXPATHLEN];
+	char thisname[MAXPATHLEN];
+	int l1=0,l2=0;
+	char *p;
+	struct file_struct *file;
 
-  if (flags & SAME_NAME)
-    l1 = read_byte(f);
+	if (flags & SAME_NAME)
+		l1 = read_byte(f);
   
-  if (flags & LONG_NAME)
-    l2 = read_int(f);
-  else
-    l2 = read_byte(f);
+	if (flags & LONG_NAME)
+		l2 = read_int(f);
+	else
+		l2 = read_byte(f);
 
-  file = (struct file_struct *)malloc(sizeof(*file));
-  if (!file) out_of_memory("receive_file_entry");
-  bzero((char *)file,sizeof(*file));
-  (*fptr) = file;
+	file = (struct file_struct *)malloc(sizeof(*file));
+	if (!file) out_of_memory("receive_file_entry");
+	memset((char *)file, 0, sizeof(*file));
+	(*fptr) = file;
 
-  if (l2 >= MAXPATHLEN-l1) overflow("receive_file_entry");
+	if (l2 >= MAXPATHLEN-l1) overflow("receive_file_entry");
 
-  strlcpy(thisname,lastname,l1);
-  read_sbuf(f,&thisname[l1],l2);
-  thisname[l1+l2] = 0;
+	strlcpy(thisname,lastname,l1);
+	read_sbuf(f,&thisname[l1],l2);
+	thisname[l1+l2] = 0;
 
-  strlcpy(lastname,thisname,MAXPATHLEN-1);
-  lastname[MAXPATHLEN-1] = 0;
+	strlcpy(lastname,thisname,MAXPATHLEN-1);
+	lastname[MAXPATHLEN-1] = 0;
 
-  clean_fname(thisname);
+	clean_fname(thisname);
 
-  if ((p = strrchr(thisname,'/'))) {
-	  static char *lastdir;
-	  *p = 0;
-	  if (lastdir && strcmp(thisname, lastdir)==0) {
-		  file->dirname = lastdir;
-	  } else {
-		  file->dirname = strdup(thisname);
-		  lastdir = file->dirname;
-	  }
-	  file->basename = strdup(p+1);
-  } else {
-	  file->dirname = NULL;
-	  file->basename = strdup(thisname);
-  }
+	if ((p = strrchr(thisname,'/'))) {
+		static char *lastdir;
+		*p = 0;
+		if (lastdir && strcmp(thisname, lastdir)==0) {
+			file->dirname = lastdir;
+		} else {
+			file->dirname = strdup(thisname);
+			lastdir = file->dirname;
+		}
+		file->basename = strdup(p+1);
+	} else {
+		file->dirname = NULL;
+		file->basename = strdup(thisname);
+	}
 
-  if (!file->basename) out_of_memory("receive_file_entry 1");
+	if (!file->basename) out_of_memory("receive_file_entry 1");
 
 
-  file->flags = flags;
-  file->length = read_longint(f);
-  file->modtime = (flags & SAME_TIME) ? last_time : (time_t)read_int(f);
-  file->mode = (flags & SAME_MODE) ? last_mode : (mode_t)read_int(f);
-  if (preserve_uid)
-    file->uid = (flags & SAME_UID) ? last_uid : (uid_t)read_int(f);
-  if (preserve_gid)
-    file->gid = (flags & SAME_GID) ? last_gid : (gid_t)read_int(f);
-  if (preserve_devices && IS_DEVICE(file->mode))
-    file->rdev = (flags & SAME_RDEV) ? last_rdev : (dev_t)read_int(f);
+	file->flags = flags;
+	file->length = read_longint(f);
+	file->modtime = (flags & SAME_TIME) ? last_time : (time_t)read_int(f);
+	file->mode = (flags & SAME_MODE) ? last_mode : from_wire_mode(read_int(f));
+	if (preserve_uid)
+		file->uid = (flags & SAME_UID) ? last_uid : (uid_t)read_int(f);
+	if (preserve_gid)
+		file->gid = (flags & SAME_GID) ? last_gid : (gid_t)read_int(f);
+	if (preserve_devices && IS_DEVICE(file->mode))
+		file->rdev = (flags & SAME_RDEV) ? last_rdev : (dev_t)read_int(f);
 
-  if (preserve_links && S_ISLNK(file->mode)) {
-    int l = read_int(f);
-    file->link = (char *)malloc(l+1);
-    if (!file->link) out_of_memory("receive_file_entry 2");
-    read_sbuf(f,file->link,l);
-  }
+	if (preserve_links && S_ISLNK(file->mode)) {
+		int l = read_int(f);
+		file->link = (char *)malloc(l+1);
+		if (!file->link) out_of_memory("receive_file_entry 2");
+		read_sbuf(f,file->link,l);
+	}
 
 #if SUPPORT_HARD_LINKS
-  if (preserve_hard_links && S_ISREG(file->mode)) {
-    file->dev = read_int(f);
-    file->inode = read_int(f);
-  }
+	if (preserve_hard_links && S_ISREG(file->mode)) {
+		file->dev = read_int(f);
+		file->inode = read_int(f);
+	}
 #endif
   
-  if (always_checksum) {
-	  file->sum = (char *)malloc(MD4_SUM_LENGTH);
-	  if (!file->sum) out_of_memory("md4 sum");
-	  read_buf(f,file->sum,csum_length);
-  }
+	if (always_checksum) {
+		file->sum = (char *)malloc(MD4_SUM_LENGTH);
+		if (!file->sum) out_of_memory("md4 sum");
+		read_buf(f,file->sum,csum_length);
+	}
   
-  last_mode = file->mode;
-  last_rdev = file->rdev;
-  last_uid = file->uid;
-  last_gid = file->gid;
-  last_time = file->modtime;
+	last_mode = file->mode;
+	last_rdev = file->rdev;
+	last_uid = file->uid;
+	last_gid = file->gid;
+	last_time = file->modtime;
+
+	if (!preserve_perms) {
+		extern int orig_umask;
+		/* set an appropriate set of permissions based on original
+		   permissions and umask. This emulates what GNU cp does */
+		file->mode &= ~orig_umask;
+	}
 }
 
 
@@ -356,7 +375,7 @@ static struct file_struct *make_file(char *fname)
 	clean_fname(cleaned_name);
 	fname = cleaned_name;
 
-	bzero(sum,SUM_LENGTH);
+	memset(sum,0,SUM_LENGTH);
 
 	if (link_stat(fname,&st) != 0) {
 		io_error = 1;
@@ -383,7 +402,7 @@ static struct file_struct *make_file(char *fname)
 	
 	file = (struct file_struct *)malloc(sizeof(*file));
 	if (!file) out_of_memory("make_file");
-	bzero((char *)file,sizeof(*file));
+	memset((char *)file,0,sizeof(*file));
 
 	if ((p = strrchr(fname,'/'))) {
 		static char *lastdir;
@@ -453,14 +472,14 @@ static struct file_struct *make_file(char *fname)
 	}
 
 	if (!S_ISDIR(st.st_mode))
-		total_size += st.st_size;
+		stats.total_size += st.st_size;
 
 	return file;
 }
 
 
 
-static void send_file_name(int f,struct file_list *flist,char *fname,
+void send_file_name(int f,struct file_list *flist,char *fname,
 			   int recursive, unsigned base_flags)
 {
   struct file_struct *file;
@@ -487,10 +506,10 @@ static void send_file_name(int f,struct file_list *flist,char *fname,
   }
 
   if (S_ISDIR(file->mode) && recursive) {
-    char **last_exclude_list = local_exclude_list;
-    send_directory(f,flist,f_name(file));
-    local_exclude_list = last_exclude_list;
-    return;
+	  struct exclude_struct **last_exclude_list = local_exclude_list;
+	  send_directory(f,flist,f_name(file));
+	  local_exclude_list = last_exclude_list;
+	  return;
   }
 }
 
@@ -507,7 +526,7 @@ static void send_directory(int f,struct file_list *flist,char *dir)
 	d = opendir(dir);
 	if (!d) {
 		io_error = 1;
-		rprintf(FERROR,"%s: %s\n",
+		rprintf(FERROR,"opendir(%s): %s\n",
 			dir,strerror(errno));
 		return;
 	}
@@ -526,10 +545,12 @@ static void send_directory(int f,struct file_list *flist,char *dir)
 	}
 	p = fname + strlen(fname);
 
+	local_exclude_list = NULL;
+
 	if (cvs_exclude) {
 		if (strlen(fname) + strlen(".cvsignore") <= MAXPATHLEN-1) {
 			strcpy(p,".cvsignore");
-			local_exclude_list = make_exclude_list(fname,NULL,0);
+			local_exclude_list = make_exclude_list(fname,NULL,0,0);
 		} else {
 			io_error = 1;
 			rprintf(FINFO,"cannot cvs-exclude in long-named directory %s\n",fname);
@@ -542,7 +563,11 @@ static void send_directory(int f,struct file_list *flist,char *dir)
 		    strcmp(dname,"..")==0)
 			continue;
 		strlcpy(p,dname,MAXPATHLEN-(l+1));
-		send_file_name(f,flist,fname,recurse,FLAG_DELETE);
+		send_file_name(f,flist,fname,recurse,0);
+	}
+
+	if (local_exclude_list) {
+		add_exclude_list("!", &local_exclude_list, 0);
 	}
 
 	closedir(d);
@@ -554,16 +579,18 @@ struct file_list *send_file_list(int f,int argc,char *argv[])
 {
 	int i,l;
 	STRUCT_STAT st;
-	char *p,*dir;
-	char dbuf[MAXPATHLEN];
+	char *p,*dir,*olddir;
 	char lastpath[MAXPATHLEN]="";
 	struct file_list *flist;
+	int64 start_write;
 
 	if (verbose && recurse && !am_server && f != -1) {
 		rprintf(FINFO,"building file list ... ");
 		rflush(FINFO);
 	}
 
+	start_write = stats.total_written;
+
 	flist = (struct file_list *)malloc(sizeof(flist[0]));
 	if (!flist) out_of_memory("send_file_list");
 
@@ -600,6 +627,7 @@ struct file_list *send_file_list(int f,int argc,char *argv[])
 		}
 
 		dir = NULL;
+		olddir = NULL;
 
 		if (!relative_paths) {
 			p = strrchr(fname,'/');
@@ -619,8 +647,11 @@ struct file_list *send_file_list(int f,int argc,char *argv[])
 				strlcpy(lastpath, fname, sizeof(lastpath)-1);
 				*p = '/';
 				for (p=fname+1; (p=strchr(p,'/')); p++) {
+					int copy_links_saved = copy_links;
 					*p = 0;
+					copy_links = 0;
 					send_file_name(f, flist, fname, 0, 0);
+					copy_links = copy_links_saved;
 					*p = '/';
 				}
 			} else {
@@ -632,32 +663,32 @@ struct file_list *send_file_list(int f,int argc,char *argv[])
 			fname = ".";
 		
 		if (dir && *dir) {
-			if (getcwd(dbuf,MAXPATHLEN-1) == NULL) {
-				rprintf(FERROR,"getwd : %s\n",strerror(errno));
-				exit_cleanup(1);
-			}
-			if (chdir(dir) != 0) {
+			olddir = push_dir(dir, 1);
+
+			if (!olddir) {
 				io_error=1;
-				rprintf(FERROR,"chdir %s : %s\n",
+				rprintf(FERROR,"push_dir %s : %s\n",
 					dir,strerror(errno));
 				continue;
 			}
+
 			flist_dir = dir;
-			if (one_file_system)
-				set_filesystem(fname);
-			send_file_name(f,flist,fname,recurse,FLAG_DELETE);
-			flist_dir = NULL;
-			if (chdir(dbuf) != 0) {
-				rprintf(FERROR,"chdir %s : %s\n",
-					dbuf,strerror(errno));
-				exit_cleanup(1);
-			}
-			continue;
 		}
 		
 		if (one_file_system)
 			set_filesystem(fname);
-		send_file_name(f,flist,fname,recurse,FLAG_DELETE);
+
+		if (!recurse || !send_included_file_names(f,flist))
+			send_file_name(f,flist,fname,recurse,FLAG_DELETE);
+
+		if (olddir != NULL) {
+			flist_dir = NULL;
+			if (pop_dir(olddir) != 0) {
+				rprintf(FERROR,"pop_dir %s : %s\n",
+					dir,strerror(errno));
+				exit_cleanup(RERR_FILESELECT);
+			}
+		}
 	}
 
 	if (f != -1) {
@@ -667,7 +698,7 @@ struct file_list *send_file_list(int f,int argc,char *argv[])
 	if (verbose && recurse && !am_server && f != -1)
 		rprintf(FINFO,"done\n");
 	
-	clean_flist(flist);
+	clean_flist(flist, 0);
 	
 	/* now send the uid/gid list. This was introduced in protocol
            version 15 */
@@ -682,7 +713,8 @@ struct file_list *send_file_list(int f,int argc,char *argv[])
 
 	if (f != -1) {
 		io_end_buffering(f);
-		write_flush(f);
+		stats.flist_size = stats.total_written - start_write;
+		stats.num_files = flist->count;
 	}
 
 	if (verbose > 2)
@@ -696,12 +728,16 @@ struct file_list *recv_file_list(int f)
 {
   struct file_list *flist;
   unsigned char flags;
+  int64 start_read;
+  extern int list_only;
 
   if (verbose && recurse && !am_server) {
     rprintf(FINFO,"receiving file list ... ");
     rflush(FINFO);
   }
 
+  start_read = stats.total_read;
+
   flist = (struct file_list *)malloc(sizeof(flist[0]));
   if (!flist)
     goto oom;
@@ -732,7 +768,7 @@ struct file_list *recv_file_list(int f)
     receive_file_entry(&flist->files[i],flags,f);
 
     if (S_ISREG(flist->files[i]->mode))
-      total_size += flist->files[i]->length;
+	    stats.total_size += flist->files[i]->length;
 
     flist->count++;
 
@@ -744,7 +780,7 @@ struct file_list *recv_file_list(int f)
   if (verbose > 2)
     rprintf(FINFO,"received %d names\n",flist->count);
 
-  clean_flist(flist);
+  clean_flist(flist, relative_paths);
 
   if (verbose && recurse && !am_server) {
     rprintf(FINFO,"done\n");
@@ -760,9 +796,20 @@ struct file_list *recv_file_list(int f)
 	  io_error |= read_int(f);
   }
 
+  if (list_only) {
+	  int i;
+	  for (i=0;i<flist->count;i++) {
+		  list_file_entry(flist->files[i]);
+	  }
+  }
+
+
   if (verbose > 2)
     rprintf(FINFO,"recv_file_list done\n");
 
+  stats.flist_size = stats.total_read - start_read;
+  stats.num_files = flist->count;
+
   return flist;
 
 oom:
@@ -777,8 +824,8 @@ int file_compare(struct file_struct **f1,struct file_struct **f2)
 	if (!(*f1)->basename) return -1;
 	if (!(*f2)->basename) return 1;
 	if ((*f1)->dirname == (*f2)->dirname)
-		return strcmp((*f1)->basename, (*f2)->basename);
-	return strcmp(f_name(*f1),f_name(*f2));
+		return u_strcmp((*f1)->basename, (*f2)->basename);
+	return u_strcmp(f_name(*f1),f_name(*f2));
 }
 
 
@@ -814,7 +861,7 @@ static void free_file(struct file_struct *file)
 	if (file->basename) free(file->basename);
 	if (file->link) free(file->link);
 	if (file->sum) free(file->sum);
-	bzero((char *)file, sizeof(*file));
+	memset((char *)file, 0, sizeof(*file));
 }
 
 
@@ -828,9 +875,9 @@ void flist_free(struct file_list *flist)
 		free_file(flist->files[i]);
 		free(flist->files[i]);
 	}	
-	bzero((char *)flist->files, sizeof(flist->files[0])*flist->count);
+	memset((char *)flist->files, 0, sizeof(flist->files[0])*flist->count);
 	free(flist->files);
-	bzero((char *)flist, sizeof(*flist));
+	memset((char *)flist, 0, sizeof(*flist));
 	free(flist);
 }
 
@@ -839,7 +886,7 @@ void flist_free(struct file_list *flist)
  * This routine ensures we don't have any duplicate names in our file list.
  * duplicate names can cause corruption because of the pipelining 
  */
-void clean_flist(struct file_list *flist)
+static void clean_flist(struct file_list *flist, int strip_root)
 {
 	int i;
 
@@ -861,6 +908,37 @@ void clean_flist(struct file_list *flist)
 			free_file(flist->files[i]);
 		} 
 	}
+
+	if (strip_root) {
+		/* we need to strip off the root directory in the case
+		   of relative paths, but this must be done _after_
+		   the sorting phase */
+		for (i=0;i<flist->count;i++) {
+			if (flist->files[i]->dirname &&
+			    flist->files[i]->dirname[0] == '/') {
+				memmove(&flist->files[i]->dirname[0],
+					&flist->files[i]->dirname[1],
+					strlen(flist->files[i]->dirname));
+			}
+			
+			if (flist->files[i]->dirname && 
+			    !flist->files[i]->dirname[0]) {
+				flist->files[i]->dirname = NULL;
+			}
+		}
+	}
+
+
+	if (verbose <= 3) return;
+
+	for (i=0;i<flist->count;i++) {
+		rprintf(FINFO,"[%d] i=%d %s %s mode=0%o len=%d\n",
+			getpid(), i, 
+			NS(flist->files[i]->dirname),
+			NS(flist->files[i]->basename),
+			flist->files[i]->mode,
+			(int)flist->files[i]->length);
+	}
 }
 
 
@@ -878,7 +956,9 @@ char *f_name(struct file_struct *f)
 	n = (n+1)%10;
 
 	if (f->dirname) {
-		slprintf(p, MAXPATHLEN-1, "%s/%s", f->dirname, f->basename);
+		strlcpy(p, f->dirname, MAXPATHLEN-1);
+		strlcat(p, "/", MAXPATHLEN-1);
+		strlcat(p, f->basename, MAXPATHLEN-1);
 	} else {
 		strlcpy(p, f->basename, MAXPATHLEN-1);
 	}

generator.c

@@ -0,0 +1,420 @@
+/* 
+   Copyright (C) Andrew Tridgell 1996
+   Copyright (C) Paul Mackerras 1996
+   
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+   
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "rsync.h"
+
+extern int verbose;
+extern int dry_run;
+extern int relative_paths;
+extern int preserve_links;
+extern int am_root;
+extern int preserve_devices;
+extern int preserve_hard_links;
+extern int update_only;
+extern int whole_file;
+extern int block_size;
+extern int csum_length;
+extern int ignore_times;
+extern int io_timeout;
+extern int remote_version;
+extern int always_checksum;
+
+
+/* choose whether to skip a particular file */
+static int skip_file(char *fname,
+		     struct file_struct *file, STRUCT_STAT *st)
+{
+	if (st->st_size != file->length) {
+		return 0;
+	}
+	
+	/* if always checksum is set then we use the checksum instead 
+	   of the file time to determine whether to sync */
+	if (always_checksum && S_ISREG(st->st_mode)) {
+		char sum[MD4_SUM_LENGTH];
+		file_checksum(fname,sum,st->st_size);
+		return (memcmp(sum,file->sum,csum_length) == 0);
+	}
+
+	if (ignore_times) {
+		return 0;
+	}
+
+	return (st->st_mtime == file->modtime);
+}
+
+
+/* use a larger block size for really big files */
+static int adapt_block_size(struct file_struct *file, int bsize)
+{
+	int ret;
+
+	if (bsize != BLOCK_SIZE) return bsize;
+
+	ret = file->length / (10000); /* rough heuristic */
+	ret = ret & ~15; /* multiple of 16 */
+	if (ret < bsize) ret = bsize;
+	if (ret > CHUNK_SIZE/2) ret = CHUNK_SIZE/2;
+	return ret;
+}
+
+
+/*
+  send a sums struct down a fd
+  */
+static void send_sums(struct sum_struct *s,int f_out)
+{
+	int i;
+
+  /* tell the other guy how many we are going to be doing and how many
+     bytes there are in the last chunk */
+	write_int(f_out,s?s->count:0);
+	write_int(f_out,s?s->n:block_size);
+	write_int(f_out,s?s->remainder:0);
+	if (s)
+		for (i=0;i<s->count;i++) {
+			write_int(f_out,s->sums[i].sum1);
+			write_buf(f_out,s->sums[i].sum2,csum_length);
+		}
+}
+
+
+/*
+  generate a stream of signatures/checksums that describe a buffer
+
+  generate approximately one checksum every n bytes
+  */
+static struct sum_struct *generate_sums(struct map_struct *buf,OFF_T len,int n)
+{
+	int i;
+	struct sum_struct *s;
+	int count;
+	int block_len = n;
+	int remainder = (len%block_len);
+	OFF_T offset = 0;
+
+	count = (len+(block_len-1))/block_len;
+
+	s = (struct sum_struct *)malloc(sizeof(*s));
+	if (!s) out_of_memory("generate_sums");
+
+	s->count = count;
+	s->remainder = remainder;
+	s->n = n;
+	s->flength = len;
+
+	if (count==0) {
+		s->sums = NULL;
+		return s;
+	}
+
+	if (verbose > 3)
+		rprintf(FINFO,"count=%d rem=%d n=%d flength=%d\n",
+			s->count,s->remainder,s->n,(int)s->flength);
+
+	s->sums = (struct sum_buf *)malloc(sizeof(s->sums[0])*s->count);
+	if (!s->sums) out_of_memory("generate_sums");
+  
+	for (i=0;i<count;i++) {
+		int n1 = MIN(len,n);
+		char *map = map_ptr(buf,offset,n1);
+
+		s->sums[i].sum1 = get_checksum1(map,n1);
+		get_checksum2(map,n1,s->sums[i].sum2);
+
+		s->sums[i].offset = offset;
+		s->sums[i].len = n1;
+		s->sums[i].i = i;
+
+		if (verbose > 3)
+			rprintf(FINFO,"chunk[%d] offset=%d len=%d sum1=%08x\n",
+				i,(int)s->sums[i].offset,s->sums[i].len,s->sums[i].sum1);
+
+		len -= n1;
+		offset += n1;
+	}
+
+	return s;
+}
+
+
+void recv_generator(char *fname,struct file_list *flist,int i,int f_out)
+{  
+	int fd;
+	STRUCT_STAT st;
+	struct map_struct *buf;
+	struct sum_struct *s;
+	int statret;
+	struct file_struct *file = flist->files[i];
+	char *fnamecmp;
+	char fnamecmpbuf[MAXPATHLEN];
+	extern char *compare_dest;
+	extern int list_only;
+
+	if (list_only) return;
+
+	if (verbose > 2)
+		rprintf(FINFO,"recv_generator(%s,%d)\n",fname,i);
+
+	statret = link_stat(fname,&st);
+
+	if (S_ISDIR(file->mode)) {
+		if (dry_run) return;
+		if (statret == 0 && !S_ISDIR(st.st_mode)) {
+			if (do_unlink(fname) != 0) {
+				rprintf(FERROR,"unlink %s : %s\n",fname,strerror(errno));
+				return;
+			}
+			statret = -1;
+		}
+		if (statret != 0 && do_mkdir(fname,file->mode) != 0 && errno != EEXIST) {
+			if (!(relative_paths && errno==ENOENT && 
+			      create_directory_path(fname)==0 && 
+			      do_mkdir(fname,file->mode)==0)) {
+				rprintf(FERROR,"mkdir %s : %s (2)\n",
+					fname,strerror(errno));
+			}
+		}
+		if (set_perms(fname,file,NULL,0) && verbose) 
+			rprintf(FINFO,"%s/\n",fname);
+		return;
+	}
+
+	if (preserve_links && S_ISLNK(file->mode)) {
+#if SUPPORT_LINKS
+		char lnk[MAXPATHLEN];
+		int l;
+		extern int safe_symlinks;
+
+		if (safe_symlinks && unsafe_symlink(file->link, fname)) {
+			if (verbose) {
+				rprintf(FINFO,"ignoring unsafe symlink %s -> %s\n",
+					fname,file->link);
+			}
+			return;
+		}
+		if (statret == 0) {
+			l = readlink(fname,lnk,MAXPATHLEN-1);
+			if (l > 0) {
+				lnk[l] = 0;
+				if (strcmp(lnk,file->link) == 0) {
+					set_perms(fname,file,&st,1);
+					return;
+				}
+			}
+		}
+		delete_file(fname);
+		if (do_symlink(file->link,fname) != 0) {
+			rprintf(FERROR,"link %s -> %s : %s\n",
+				fname,file->link,strerror(errno));
+		} else {
+			set_perms(fname,file,NULL,0);
+			if (verbose) {
+				rprintf(FINFO,"%s -> %s\n",
+					fname,file->link);
+			}
+		}
+#endif
+		return;
+	}
+
+#ifdef HAVE_MKNOD
+	if (am_root && preserve_devices && IS_DEVICE(file->mode)) {
+		if (statret != 0 || 
+		    st.st_mode != file->mode ||
+		    st.st_rdev != file->rdev) {	
+			delete_file(fname);
+			if (verbose > 2)
+				rprintf(FINFO,"mknod(%s,0%o,0x%x)\n",
+					fname,(int)file->mode,(int)file->rdev);
+			if (do_mknod(fname,file->mode,file->rdev) != 0) {
+				rprintf(FERROR,"mknod %s : %s\n",fname,strerror(errno));
+			} else {
+				set_perms(fname,file,NULL,0);
+				if (verbose)
+					rprintf(FINFO,"%s\n",fname);
+			}
+		} else {
+			set_perms(fname,file,&st,1);
+		}
+		return;
+	}
+#endif
+
+	if (preserve_hard_links && check_hard_link(file)) {
+		if (verbose > 1)
+			rprintf(FINFO,"%s is a hard link\n",f_name(file));
+		return;
+	}
+
+	if (!S_ISREG(file->mode)) {
+		rprintf(FINFO,"skipping non-regular file %s\n",fname);
+		return;
+	}
+
+	fnamecmp = fname;
+
+	if ((statret == -1) && (compare_dest != NULL)) {
+		/* try the file at compare_dest instead */
+		int saveerrno = errno;
+		slprintf(fnamecmpbuf,MAXPATHLEN-1,"%s/%s",compare_dest,fname);
+		statret = link_stat(fnamecmpbuf,&st);
+		if (!S_ISREG(st.st_mode))
+			statret = -1;
+		if (statret == -1)
+			errno = saveerrno;
+		else
+			fnamecmp = fnamecmpbuf;
+	}
+
+	if (statret == -1) {
+		if (errno == ENOENT) {
+			write_int(f_out,i);
+			if (!dry_run) send_sums(NULL,f_out);
+		} else {
+			if (verbose > 1)
+				rprintf(FERROR,"recv_generator failed to open %s\n",fname);
+		}
+		return;
+	}
+
+	if (!S_ISREG(st.st_mode)) {
+		if (delete_file(fname) != 0) {
+			return;
+		}
+
+		/* now pretend the file didn't exist */
+		write_int(f_out,i);
+		if (!dry_run) send_sums(NULL,f_out);    
+		return;
+	}
+
+	if (update_only && st.st_mtime > file->modtime && fnamecmp == fname) {
+		if (verbose > 1)
+			rprintf(FINFO,"%s is newer\n",fname);
+		return;
+	}
+
+	if (skip_file(fname, file, &st)) {
+		set_perms(fname,file,&st,1);
+		return;
+	}
+
+	if (dry_run) {
+		write_int(f_out,i);
+		return;
+	}
+
+	if (whole_file) {
+		write_int(f_out,i);
+		send_sums(NULL,f_out);    
+		return;
+	}
+
+	/* open the file */  
+	fd = open(fnamecmp,O_RDONLY);
+
+	if (fd == -1) {
+		rprintf(FERROR,"failed to open %s : %s\n",fnamecmp,strerror(errno));
+		rprintf(FERROR,"skipping %s\n",fname);
+		return;
+	}
+
+	if (st.st_size > 0) {
+		buf = map_file(fd,st.st_size);
+	} else {
+		buf = NULL;
+	}
+
+	if (verbose > 3)
+		rprintf(FINFO,"gen mapped %s of size %d\n",fnamecmp,(int)st.st_size);
+
+	s = generate_sums(buf,st.st_size,adapt_block_size(file, block_size));
+
+	if (verbose > 2)
+		rprintf(FINFO,"sending sums for %d\n",i);
+
+	write_int(f_out,i);
+	send_sums(s,f_out);
+
+	close(fd);
+	if (buf) unmap_file(buf);
+
+	free_sums(s);
+}
+
+
+
+void generate_files(int f,struct file_list *flist,char *local_name,int f_recv)
+{
+	int i;
+	int phase=0;
+
+	if (verbose > 2)
+		rprintf(FINFO,"generator starting pid=%d count=%d\n",
+			(int)getpid(),flist->count);
+
+	for (i = 0; i < flist->count; i++) {
+		struct file_struct *file = flist->files[i];
+		mode_t saved_mode = file->mode;
+		if (!file->basename) continue;
+
+		/* we need to ensure that any directories we create have writeable
+		   permissions initially so that we can create the files within
+		   them. This is then fixed after the files are transferred */
+		if (!am_root && S_ISDIR(file->mode)) {
+			file->mode |= S_IWUSR; /* user write */
+		}
+
+		recv_generator(local_name?local_name:f_name(file),
+			       flist,i,f);
+
+		file->mode = saved_mode;
+	}
+
+	phase++;
+	csum_length = SUM_LENGTH;
+	ignore_times=1;
+
+	if (verbose > 2)
+		rprintf(FINFO,"generate_files phase=%d\n",phase);
+
+	write_int(f,-1);
+
+	/* we expect to just sit around now, so don't exit on a
+	   timeout. If we really get a timeout then the other process should
+	   exit */
+	io_timeout = 0;
+
+	if (remote_version >= 13) {
+		/* in newer versions of the protocol the files can cycle through
+		   the system more than once to catch initial checksum errors */
+		for (i=read_int(f_recv); i != -1; i=read_int(f_recv)) {
+			struct file_struct *file = flist->files[i];
+			recv_generator(local_name?local_name:f_name(file),
+				       flist,i,f);    
+		}
+
+		phase++;
+		if (verbose > 2)
+			rprintf(FINFO,"generate_files phase=%d\n",phase);
+
+		write_int(f,-1);
+	}
+}

hlink.c

@@ -56,7 +56,7 @@ void init_hard_links(struct file_list *flist)
 		out_of_memory("init_hard_links");
 
 	for (i = 0; i < flist->count; i++)
-		bcopy(flist->files[i], &hlink_list[i], sizeof(hlink_list[0]));
+		memcpy(&hlink_list[i], flist->files[i], sizeof(hlink_list[0]));
 
 	qsort(hlink_list,flist->count,
 	      sizeof(hlink_list[0]),

io.c

@@ -24,81 +24,26 @@
   */
 #include "rsync.h"
 
-static int64 total_written;
-static int64 total_read;
+/* if no timeout is specified then use a 60 second select timeout */
+#define SELECT_TIMEOUT 60
 
+static int io_multiplexing_out;
+static int io_multiplexing_in;
+static int multiplex_in_fd;
+static int multiplex_out_fd;
+static time_t last_io;
+static int eof_error=1;
 extern int verbose;
-extern int sparse_files;
 extern int io_timeout;
-
-int64 write_total(void)
-{
-  return total_written;
-}
-
-int64 read_total(void)
-{
-  return total_read;
-}
+extern struct stats stats;
 
 static int buffer_f_in = -1;
 
-void setup_nonblocking(int f_in,int f_out)
+void setup_readbuffer(int f_in)
 {
-  set_blocking(f_out,0);
-  buffer_f_in = f_in;
+	buffer_f_in = f_in;
 }
 
-
-static char *read_buffer;
-static char *read_buffer_p;
-static int read_buffer_len;
-static int read_buffer_size;
-
-
-/* This function was added to overcome a deadlock problem when using
- * ssh.  It looks like we can't allow our receive queue to get full or
- * ssh will clag up. Uggh.  */
-static void read_check(int f)
-{
-  int n;
-
-  if (f == -1) return;
-
-  if (read_buffer_len == 0) {
-    read_buffer_p = read_buffer;
-  }
-
-  if ((n=num_waiting(f)) <= 0)
-    return;
-
-  /* things could deteriorate if we read in really small chunks */
-  if (n < 10) n = 1024;
-
-  if (read_buffer_p != read_buffer) {
-    memmove(read_buffer,read_buffer_p,read_buffer_len);
-    read_buffer_p = read_buffer;
-  }
-
-  if (n > (read_buffer_size - read_buffer_len)) {
-    read_buffer_size += n;
-    if (!read_buffer)
-      read_buffer = (char *)malloc(read_buffer_size);
-    else
-      read_buffer = (char *)realloc(read_buffer,read_buffer_size);
-    if (!read_buffer) out_of_memory("read check");      
-    read_buffer_p = read_buffer;      
-  }
-
-  n = read(f,read_buffer+read_buffer_len,n);
-  if (n > 0) {
-    read_buffer_len += n;
-  }
-}
-
-static time_t last_io;
-
-
 static void check_timeout(void)
 {
 	time_t t;
@@ -112,21 +57,194 @@ static void check_timeout(void)
 
 	t = time(NULL);
 
-	if (last_io && io_timeout && (t-last_io)>io_timeout) {
-		rprintf(FERROR,"read timeout after %d second - exiting\n", 
+	if (last_io && io_timeout && (t-last_io) >= io_timeout) {
+		rprintf(FERROR,"io timeout after %d second - exiting\n", 
 			(int)(t-last_io));
-		exit_cleanup(1);
+		exit_cleanup(RERR_TIMEOUT);
 	}
 }
 
-static int readfd(int fd,char *buffer,int N)
+
+static char *read_buffer;
+static char *read_buffer_p;
+static int read_buffer_len;
+static int read_buffer_size;
+static int no_flush;
+static int no_flush_read;
+
+/* read from a socket with IO timeout. return the number of
+   bytes read. If no bytes can be read then exit, never return
+   a number <= 0 */
+static int read_timeout(int fd, char *buf, int len)
+{
+	int n, ret=0;
+
+	no_flush_read++;
+	io_flush();
+	no_flush_read--;
+
+	while (ret == 0) {
+		fd_set fds;
+		struct timeval tv;
+
+		FD_ZERO(&fds);
+		FD_SET(fd, &fds);
+		tv.tv_sec = io_timeout?io_timeout:SELECT_TIMEOUT;
+		tv.tv_usec = 0;
+
+		if (select(fd+1, &fds, NULL, NULL, &tv) != 1) {
+			check_timeout();
+			continue;
+		}
+
+		n = read(fd, buf, len);
+
+		if (n > 0) {
+			buf += n;
+			len -= n;
+			ret += n;
+			if (io_timeout)
+				last_io = time(NULL);
+			continue;
+		}
+
+		if (n == -1 && errno == EINTR) {
+			continue;
+		}
+
+		if (n == -1 && 
+		    (errno == EAGAIN || errno == EWOULDBLOCK)) {
+			/* this shouldn't happen, if it does then
+			   sleep for a short time to prevent us
+			   chewing too much CPU */
+			u_sleep(100);
+			continue;
+		}
+
+		if (n == 0) {
+			if (eof_error) {
+				rprintf(FERROR,"unexpected EOF in read_timeout\n");
+			}
+			exit_cleanup(RERR_STREAMIO);
+		}
+
+		rprintf(FERROR,"read error: %s\n", strerror(errno));
+		exit_cleanup(RERR_STREAMIO);
+	}
+
+	return ret;
+}
+
+/* continue trying to read len bytes - don't return until len
+   has been read */
+static void read_loop(int fd, char *buf, int len)
+{
+	while (len) {
+		int n = read_timeout(fd, buf, len);
+
+		buf += n;
+		len -= n;
+	}
+}
+
+/* read from the file descriptor handling multiplexing - 
+   return number of bytes read
+   never return <= 0 */
+static int read_unbuffered(int fd, char *buf, int len)
+{
+	static int remaining;
+	char ibuf[4];
+	int tag, ret=0;
+	char line[1024];
+
+	if (!io_multiplexing_in || fd != multiplex_in_fd) 
+		return read_timeout(fd, buf, len);
+
+	while (ret == 0) {
+		if (remaining) {
+			len = MIN(len, remaining);
+			read_loop(fd, buf, len);
+			remaining -= len;
+			ret = len;
+			continue;
+		}
+
+		read_loop(fd, ibuf, 4);
+		tag = IVAL(ibuf, 0);
+
+		remaining = tag & 0xFFFFFF;
+		tag = tag >> 24;
+
+		if (tag == MPLEX_BASE) continue;
+
+		tag -= MPLEX_BASE;
+
+		if (tag != FERROR && tag != FINFO) {
+			rprintf(FERROR,"unexpected tag %d\n", tag);
+			exit_cleanup(RERR_STREAMIO);
+		}
+
+		if (remaining > sizeof(line)-1) {
+			rprintf(FERROR,"multiplexing overflow %d\n\n", 
+				remaining);
+			exit_cleanup(RERR_STREAMIO);
+		}
+
+		read_loop(fd, line, remaining);
+		line[remaining] = 0;
+
+		rprintf(tag,"%s", line);
+		remaining = 0;
+	}
+
+	return ret;
+}
+
+
+
+/* This function was added to overcome a deadlock problem when using
+ * ssh.  It looks like we can't allow our receive queue to get full or
+ * ssh will clag up. Uggh.  */
+static void read_check(int f)
+{
+	int n = 8192;
+
+	if (f == -1) return;
+
+	if (read_buffer_len == 0) {
+		read_buffer_p = read_buffer;
+	}
+
+	if (n > MAX_READ_BUFFER/4)
+		n = MAX_READ_BUFFER/4;
+
+	if (read_buffer_p != read_buffer) {
+		memmove(read_buffer,read_buffer_p,read_buffer_len);
+		read_buffer_p = read_buffer;
+	}
+
+	if (n > (read_buffer_size - read_buffer_len)) {
+		read_buffer_size += n;
+		read_buffer = (char *)Realloc(read_buffer,read_buffer_size);
+		if (!read_buffer) out_of_memory("read check");      
+		read_buffer_p = read_buffer;      
+	}
+
+	n = read_unbuffered(f,read_buffer+read_buffer_len,n);
+	read_buffer_len += n;
+}
+
+
+/* do a buffered read from fd. don't return until all N bytes
+   have been read. If all N can't be read then exit with an error */
+static void readfd(int fd,char *buffer,int N)
 {
 	int  ret;
 	int total=0;  
-	struct timeval tv;
 	
-	if (read_buffer_len < N)
+	if ((read_buffer_len < N) && (N < 1024)) {
 		read_check(buffer_f_in);
+	}
 	
 	while (total < N) {
 		if (read_buffer_len > 0 && buffer_f_in == fd) {
@@ -138,45 +256,27 @@ static int readfd(int fd,char *buffer,int N)
 			continue;
 		} 
 
-		while ((ret = read(fd,buffer + total,N-total)) == -1) {
-			fd_set fds;
+		no_flush_read++;
+		io_flush();
+		no_flush_read--;
 
-			if (errno != EAGAIN && errno != EWOULDBLOCK)
-				return -1;
-			FD_ZERO(&fds);
-			FD_SET(fd, &fds);
-			tv.tv_sec = io_timeout;
-			tv.tv_usec = 0;
-
-			if (select(fd+1, &fds, NULL, NULL, 
-				   io_timeout?&tv:NULL) != 1) {
-				check_timeout();
-			}
-		}
-
-		if (ret <= 0)
-			return total;
+		ret = read_unbuffered(fd,buffer + total,N-total);
 		total += ret;
 	}
 
-	if (io_timeout)
-		last_io = time(NULL);
-	return total;
+	stats.total_read += total;
 }
 
 
 int32 read_int(int f)
 {
-  int ret;
-  char b[4];
-  if ((ret=readfd(f,b,4)) != 4) {
-    if (verbose > 1) 
-      rprintf(FERROR,"(%d) Error reading %d bytes : %s\n",
-	      getpid(),4,ret==-1?strerror(errno):"EOF");
-    exit_cleanup(1);
-  }
-  total_read += 4;
-  return IVAL(b,0);
+	char b[4];
+	int32 ret;
+
+	readfd(f,b,4);
+	ret = IVAL(b,0);
+	if (ret == (int32)0xffffffff) return -1;
+	return ret;
 }
 
 int64 read_longint(int f)
@@ -186,20 +286,16 @@ int64 read_longint(int f)
 	char b[8];
 	ret = read_int(f);
 
-	if ((int32)ret != (int32)0xffffffff) return ret;
+	if ((int32)ret != (int32)0xffffffff) {
+		return ret;
+	}
 
 #ifdef NO_INT64
 	rprintf(FERROR,"Integer overflow - attempted 64 bit offset\n");
-	exit_cleanup(1);
+	exit_cleanup(RERR_UNSUPPORTED);
 #else
 	if (remote_version >= 16) {
-		if ((ret=readfd(f,b,8)) != 8) {
-			if (verbose > 1) 
-				rprintf(FERROR,"(%d) Error reading %d bytes : %s\n",
-					getpid(),8,ret==-1?strerror(errno):"EOF");
-			exit_cleanup(1);
-		}
-		total_read += 8;
+		readfd(f,b,8);
 		ret = IVAL(b,0) | (((int64)IVAL(b,4))<<32);
 	}
 #endif
@@ -209,14 +305,7 @@ int64 read_longint(int f)
 
 void read_buf(int f,char *buf,int len)
 {
-  int ret;
-  if ((ret=readfd(f,buf,len)) != len) {
-    if (verbose > 1) 
-      rprintf(FERROR,"(%d) Error reading %d bytes : %s\n",
-	      getpid(),len,ret==-1?strerror(errno):"EOF");
-    exit_cleanup(1);
-  }
-  total_read += len;
+	readfd(f,buf,len);
 }
 
 void read_sbuf(int f,char *buf,int len)
@@ -227,184 +316,137 @@ void read_sbuf(int f,char *buf,int len)
 
 unsigned char read_byte(int f)
 {
-  unsigned char c;
-  read_buf(f,(char *)&c,1);
-  return c;
-}
-
-
-static char last_byte;
-static int last_sparse;
-
-int sparse_end(int f)
-{
-	if (last_sparse) {
-		do_lseek(f,-1,SEEK_CUR);
-		return (write(f,&last_byte,1) == 1 ? 0 : -1);
-	}
-	last_sparse = 0;
-	return 0;
-}
-
-
-static int write_sparse(int f,char *buf,int len)
-{
-	int l1=0,l2=0;
-	int ret;
-
-	for (l1=0;l1<len && buf[l1]==0;l1++) ;
-	for (l2=0;l2<(len-l1) && buf[len-(l2+1)]==0;l2++) ;
-
-	last_byte = buf[len-1];
-
-	if (l1 == len || l2 > 0)
-		last_sparse=1;
-
-	if (l1 > 0)
-		do_lseek(f,l1,SEEK_CUR);  
-
-	if (l1 == len) 
-		return len;
-
-	if ((ret=write(f,buf+l1,len-(l1+l2))) != len-(l1+l2)) {
-		if (ret == -1 || ret == 0) return ret;
-		return (l1+ret);
-	}
-
-	if (l2 > 0)
-		do_lseek(f,l2,SEEK_CUR);
-	
-	return len;
+	unsigned char c;
+	read_buf(f,(char *)&c,1);
+	return c;
 }
 
 
 
-int write_file(int f,char *buf,int len)
+/* write len bytes to fd, possibly reading from buffer_f_in if set
+   in order to unclog the pipe. don't return until all len
+   bytes have been written */
+static void writefd_unbuffered(int fd,char *buf,int len)
 {
-	int ret = 0;
+	int total = 0;
+	fd_set w_fds, r_fds;
+	int fd_count, count;
+	struct timeval tv;
+	int reading=0;
+	int blocked=0;
 
-	if (!sparse_files) 
-		return write(f,buf,len);
+	no_flush++;
 
-	while (len>0) {
-		int len1 = MIN(len, SPARSE_WRITE_SIZE);
-		int r1 = write_sparse(f, buf, len1);
-		if (r1 <= 0) {
-			if (ret > 0) return ret;
-			return r1;
+	while (total < len) {
+		FD_ZERO(&w_fds);
+		FD_ZERO(&r_fds);
+		FD_SET(fd,&w_fds);
+		fd_count = fd+1;
+
+		if (!no_flush_read) {
+			reading = (buffer_f_in != -1);
+		}
+
+		if (reading) {
+			FD_SET(buffer_f_in,&r_fds);
+			if (buffer_f_in > fd) 
+				fd_count = buffer_f_in+1;
+		}
+
+		tv.tv_sec = io_timeout?io_timeout:SELECT_TIMEOUT;
+		tv.tv_usec = 0;
+
+		count = select(fd_count,
+			       reading?&r_fds:NULL,
+			       &w_fds,NULL,
+			       &tv);
+
+		if (count <= 0) {
+			check_timeout();
+			continue;
+		}
+
+		if (reading && FD_ISSET(buffer_f_in, &r_fds)) {
+			read_check(buffer_f_in);
+		}
+
+		if (FD_ISSET(fd, &w_fds)) {
+			int n = (len-total)>>blocked;
+			int ret = write(fd,buf+total,n?n:1);
+
+			if (ret == -1 && errno == EINTR) {
+				continue;
+			}
+
+			if (ret == -1 && 
+			    (errno == EAGAIN || errno == EWOULDBLOCK)) {
+				blocked++;
+				continue;
+			}
+
+			if (ret <= 0) {
+				rprintf(FERROR,"erroring writing %d bytes - exiting\n", len);
+				exit_cleanup(RERR_STREAMIO);
+			}
+
+			blocked = 0;
+			total += ret;
+
+			if (io_timeout)
+				last_io = time(NULL);
 		}
-		len -= r1;
-		buf += r1;
-		ret += r1;
 	}
-	return ret;
+
+	no_flush--;
 }
 
 
-static int writefd_unbuffered(int fd,char *buf,int len)
-{
-  int total = 0;
-  fd_set w_fds, r_fds;
-  int fd_count, count, got_select=0;
-  struct timeval tv;
-
-  if (buffer_f_in == -1) 
-    return write(fd,buf,len);
-
-  while (total < len) {
-    int ret = write(fd,buf+total,len-total);
-
-    if (ret == 0) return total;
-
-    if (ret == -1 && !(errno == EWOULDBLOCK || errno == EAGAIN)) 
-      return -1;
-
-    if (ret == -1 && got_select) {
-	    /* hmmm, we got a write select on the fd and then failed to write.
-	       Why doesn't that mean that the fd is dead? It doesn't on some
-	       systems it seems (eg. IRIX) */
-	    u_sleep(1000);
-#if 0
-	    rprintf(FERROR,"write exception\n");
-	    exit_cleanup(1);
-#endif
-    }
-
-    got_select = 0;
-
-
-    if (ret == -1) {
-      read_check(buffer_f_in);
-
-      fd_count = fd+1;
-      FD_ZERO(&w_fds);
-      FD_ZERO(&r_fds);
-      FD_SET(fd,&w_fds);
-      if (buffer_f_in != -1) {
-	      FD_SET(buffer_f_in,&r_fds);
-	      if (buffer_f_in > fd) 
-		      fd_count = buffer_f_in+1;
-      }
-
-      tv.tv_sec = BLOCKING_TIMEOUT;
-      tv.tv_usec = 0;
-      count = select(fd_count,buffer_f_in == -1? NULL: &r_fds,
-		     &w_fds,NULL,&tv);
-      if (count == -1 && errno != EINTR) {
-	      if (verbose > 1) 
-		      rprintf(FERROR,"select error: %s\n", strerror(errno));
-	      exit_cleanup(1);
-      }
-
-      if (count == 0) {
-	      check_timeout();
-	      continue;
-      }
-      
-      if (FD_ISSET(fd, &w_fds)) {
-	      got_select = 1;
-      }
-    } else {
-      total += ret;
-    }
-  }
-
-  if (io_timeout)
-	  last_io = time(NULL);
-
-  return total;
-}
-
 static char *io_buffer;
 static int io_buffer_count;
 
 void io_start_buffering(int fd)
 {
-	io_buffer = (char *)malloc(IO_BUFFER_SIZE);
+	if (io_buffer) return;
+	multiplex_out_fd = fd;
+	io_buffer = (char *)malloc(IO_BUFFER_SIZE+4);
 	if (!io_buffer) out_of_memory("writefd");
 	io_buffer_count = 0;
+
+	/* leave room for the multiplex header in case it's needed */
+	io_buffer += 4;
+}
+
+void io_flush(void)
+{
+	int fd = multiplex_out_fd;
+	if (!io_buffer_count || no_flush) return;
+
+	if (io_multiplexing_out) {
+		SIVAL(io_buffer-4, 0, (MPLEX_BASE<<24) + io_buffer_count);
+		writefd_unbuffered(fd, io_buffer-4, io_buffer_count+4);
+	} else {
+		writefd_unbuffered(fd, io_buffer, io_buffer_count);
+	}
+	io_buffer_count = 0;
 }
 
 void io_end_buffering(int fd)
 {
-	if (io_buffer_count) {
-		if (writefd_unbuffered(fd, io_buffer, 
-				       io_buffer_count) != 
-		    io_buffer_count) {
-			rprintf(FERROR,"write failed\n");
-			exit_cleanup(1);
-		}
-		io_buffer_count = 0;
+	io_flush();
+	if (!io_multiplexing_out) {
+		free(io_buffer-4);
+		io_buffer = NULL;
 	}
-	free(io_buffer);
-	io_buffer = NULL;
 }
 
-static int writefd(int fd,char *buf,int len1)
+static void writefd(int fd,char *buf,int len)
 {
-	int len = len1;
+	stats.total_written += len;
 
-	if (!io_buffer) return writefd_unbuffered(fd, buf, len);
+	if (!io_buffer) {
+		writefd_unbuffered(fd, buf, len);
+		return;
+	}
 
 	while (len) {
 		int n = MIN(len, IO_BUFFER_SIZE-io_buffer_count);
@@ -415,69 +457,42 @@ static int writefd(int fd,char *buf,int len1)
 			io_buffer_count += n;
 		}
 		
-		if (io_buffer_count == IO_BUFFER_SIZE) {
-			if (writefd_unbuffered(fd, io_buffer, 
-					       io_buffer_count) != 
-			    io_buffer_count) {
-				return -1;
-			}
-			io_buffer_count = 0;
-		}
+		if (io_buffer_count == IO_BUFFER_SIZE) io_flush();
 	}
-
-	return len1;
 }
 
 
 void write_int(int f,int32 x)
 {
-  int ret;
-  char b[4];
-  SIVAL(b,0,x);
-  if ((ret=writefd(f,b,4)) != 4) {
-    rprintf(FERROR,"write_int failed : %s\n",
-	    ret==-1?strerror(errno):"EOF");
-    exit_cleanup(1);
-  }
-  total_written += 4;
+	char b[4];
+	SIVAL(b,0,x);
+	writefd(f,b,4);
 }
 
 void write_longint(int f, int64 x)
 {
 	extern int remote_version;
 	char b[8];
-	int ret;
 
 	if (remote_version < 16 || x <= 0x7FFFFFFF) {
 		write_int(f, (int)x);
 		return;
 	}
 
-	write_int(f, -1);
+	write_int(f, (int32)0xFFFFFFFF);
 	SIVAL(b,0,(x&0xFFFFFFFF));
 	SIVAL(b,4,((x>>32)&0xFFFFFFFF));
 
-	if ((ret=writefd(f,b,8)) != 8) {
-		rprintf(FERROR,"write_longint failed : %s\n",
-			ret==-1?strerror(errno):"EOF");
-		exit_cleanup(1);
-	}
-	total_written += 8;
+	writefd(f,b,8);
 }
 
 void write_buf(int f,char *buf,int len)
 {
-  int ret;
-  if ((ret=writefd(f,buf,len)) != len) {
-    rprintf(FERROR,"write_buf failed : %s\n",
-	    ret==-1?strerror(errno):"EOF");
-    exit_cleanup(1);
-  }
-  total_written += len;
+	writefd(f,buf,len);
 }
 
 /* write a string to the connection */
-void write_sbuf(int f,char *buf)
+static void write_sbuf(int f,char *buf)
 {
 	write_buf(f, buf, strlen(buf));
 }
@@ -488,15 +503,14 @@ void write_byte(int f,unsigned char c)
 	write_buf(f,(char *)&c,1);
 }
 
-void write_flush(int f)
-{
-}
-
-
 int read_line(int f, char *buf, int maxlen)
 {
+	eof_error = 0;
+
 	while (maxlen) {
+		buf[0] = 0;
 		read_buf(f, buf, 1);
+		if (buf[0] == 0) return 0;
 		if (buf[0] == '\n') {
 			buf[0] = 0;
 			break;
@@ -510,6 +524,9 @@ int read_line(int f, char *buf, int maxlen)
 		*buf = 0;
 		return 0;
 	}
+
+	eof_error = 1;
+
 	return 1;
 }
 
@@ -524,7 +541,51 @@ void io_printf(int fd, const char *format, ...)
 	len = vslprintf(buf, sizeof(buf)-1, format, ap);
 	va_end(ap);
 
-	if (len < 0) exit_cleanup(1);
+	if (len < 0) exit_cleanup(RERR_STREAMIO);
 
 	write_sbuf(fd, buf);
 }
+
+
+/* setup for multiplexing an error stream with the data stream */
+void io_start_multiplex_out(int fd)
+{
+	multiplex_out_fd = fd;
+	io_flush();
+	io_start_buffering(fd);
+	io_multiplexing_out = 1;
+}
+
+/* setup for multiplexing an error stream with the data stream */
+void io_start_multiplex_in(int fd)
+{
+	multiplex_in_fd = fd;
+	io_flush();
+	if (read_buffer_len) {
+		fprintf(stderr,"ERROR: data in read buffer at mplx start\n");
+		exit_cleanup(RERR_STREAMIO);
+	}
+
+	io_multiplexing_in = 1;
+}
+
+/* write an message to the error stream */
+int io_multiplex_write(int f, char *buf, int len)
+{
+	if (!io_multiplexing_out) return 0;
+
+	io_flush();
+
+	SIVAL(io_buffer-4, 0, ((MPLEX_BASE + f)<<24) + len);
+	memcpy(io_buffer, buf, len);
+
+	stats.total_written += (len+4);
+
+	writefd_unbuffered(multiplex_out_fd, io_buffer-4, len+4);
+	return 1;
+}
+
+void io_close_input(int fd)
+{
+	buffer_f_in = -1;
+}

lib/compat.c

@@ -54,7 +54,41 @@ pid_t waitpid(pid_t pid, int *statptr, int options)
 #ifndef HAVE_MEMMOVE
 void *memmove(void *dest, const void *src, size_t n)
 {
-	bcopy(src, dest, n);
+	memcpy(dest, src, n);
 	return dest;
 }
 #endif
+
+#ifndef HAVE_STRPBRK
+/* Find the first ocurrence in S of any character in ACCEPT.  
+   derived from glibc 
+*/
+char *strpbrk(const char *s, const char *accept)
+{
+	while (*s != '\0')  {
+		const char *a = accept;
+		while (*a != '\0') {
+			if (*a++ == *s)	return (char *)s;
+		}
+		++s;
+	}
+
+	return NULL;
+}
+#endif
+
+#ifdef REPLACE_INET_NTOA
+char *rep_inet_ntoa(struct in_addr ip)
+{
+	unsigned char *p = (unsigned char *)&ip.s_addr;
+	static char buf[18];
+#if WORDS_BIGENDIAN
+	slprintf(buf, 17, "%d.%d.%d.%d", 
+		 (int)p[0], (int)p[1], (int)p[2], (int)p[3]);
+#else
+	slprintf(buf, 17, "%d.%d.%d.%d", 
+		 (int)p[3], (int)p[2], (int)p[1], (int)p[0]);
+#endif
+	return buf;
+}
+#endif

lib/mdfour.c

@@ -0,0 +1,278 @@
+/* 
+   Unix SMB/Netbios implementation.
+   Version 1.9.
+   a implementation of MD4 designed for use in the SMB authentication protocol
+   Copyright (C) Andrew Tridgell 1997-1998.
+   
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+   
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "rsync.h"
+
+/* NOTE: This code makes no attempt to be fast! 
+
+   It assumes that a int is at least 32 bits long
+*/
+
+static struct mdfour *m;
+
+static inline uint32 F(uint32 X, uint32 Y, uint32 Z)
+{
+	return (X&Y) | ((~X)&Z);
+}
+
+static inline uint32 G(uint32 X, uint32 Y, uint32 Z)
+{
+	return (X&Y) | (X&Z) | (Y&Z); 
+}
+
+static inline uint32 H(uint32 X, uint32 Y, uint32 Z)
+{
+	return X^Y^Z;
+}
+
+static inline uint32 lshift(uint32 x, int s)
+{
+#ifdef LARGE_INT32
+	x &= 0xFFFFFFFF;
+	return ((x<<s)&0xFFFFFFFF) | (x>>(32-s));
+#else
+	return ((x<<s) | (x>>(32-s)));
+#endif
+}
+
+#define ROUND1(a,b,c,d,k,s) a = lshift(a + F(b,c,d) + X[k], s)
+#define ROUND2(a,b,c,d,k,s) a = lshift(a + G(b,c,d) + X[k] + 0x5A827999,s)
+#define ROUND3(a,b,c,d,k,s) a = lshift(a + H(b,c,d) + X[k] + 0x6ED9EBA1,s)
+
+/* this applies md4 to 64 byte chunks */
+static void mdfour64(uint32 *M)
+{
+	int j;
+	uint32 AA, BB, CC, DD;
+	uint32 X[16];
+	uint32 A,B,C,D;
+
+	for (j=0;j<16;j++)
+		X[j] = M[j];
+
+	A = m->A; B = m->B; C = m->C; D = m->D; 
+	AA = A; BB = B; CC = C; DD = D;
+
+        ROUND1(A,B,C,D,  0,  3);  ROUND1(D,A,B,C,  1,  7);  
+	ROUND1(C,D,A,B,  2, 11);  ROUND1(B,C,D,A,  3, 19);
+        ROUND1(A,B,C,D,  4,  3);  ROUND1(D,A,B,C,  5,  7);  
+	ROUND1(C,D,A,B,  6, 11);  ROUND1(B,C,D,A,  7, 19);
+        ROUND1(A,B,C,D,  8,  3);  ROUND1(D,A,B,C,  9,  7);  
+	ROUND1(C,D,A,B, 10, 11);  ROUND1(B,C,D,A, 11, 19);
+        ROUND1(A,B,C,D, 12,  3);  ROUND1(D,A,B,C, 13,  7);  
+	ROUND1(C,D,A,B, 14, 11);  ROUND1(B,C,D,A, 15, 19);	
+
+        ROUND2(A,B,C,D,  0,  3);  ROUND2(D,A,B,C,  4,  5);  
+	ROUND2(C,D,A,B,  8,  9);  ROUND2(B,C,D,A, 12, 13);
+        ROUND2(A,B,C,D,  1,  3);  ROUND2(D,A,B,C,  5,  5);  
+	ROUND2(C,D,A,B,  9,  9);  ROUND2(B,C,D,A, 13, 13);
+        ROUND2(A,B,C,D,  2,  3);  ROUND2(D,A,B,C,  6,  5);  
+	ROUND2(C,D,A,B, 10,  9);  ROUND2(B,C,D,A, 14, 13);
+        ROUND2(A,B,C,D,  3,  3);  ROUND2(D,A,B,C,  7,  5);  
+	ROUND2(C,D,A,B, 11,  9);  ROUND2(B,C,D,A, 15, 13);
+
+	ROUND3(A,B,C,D,  0,  3);  ROUND3(D,A,B,C,  8,  9);  
+	ROUND3(C,D,A,B,  4, 11);  ROUND3(B,C,D,A, 12, 15);
+        ROUND3(A,B,C,D,  2,  3);  ROUND3(D,A,B,C, 10,  9);  
+	ROUND3(C,D,A,B,  6, 11);  ROUND3(B,C,D,A, 14, 15);
+        ROUND3(A,B,C,D,  1,  3);  ROUND3(D,A,B,C,  9,  9);  
+	ROUND3(C,D,A,B,  5, 11);  ROUND3(B,C,D,A, 13, 15);
+        ROUND3(A,B,C,D,  3,  3);  ROUND3(D,A,B,C, 11,  9);  
+	ROUND3(C,D,A,B,  7, 11);  ROUND3(B,C,D,A, 15, 15);
+
+	A += AA; B += BB; C += CC; D += DD;
+	
+#ifdef LARGE_INT32
+	A &= 0xFFFFFFFF; B &= 0xFFFFFFFF;
+	C &= 0xFFFFFFFF; D &= 0xFFFFFFFF;
+#endif
+
+	for (j=0;j<16;j++)
+		X[j] = 0;
+
+	m->A = A; m->B = B; m->C = C; m->D = D;
+}
+
+static void copy64(uint32 *M, unsigned char *in)
+{
+	int i;
+
+	for (i=0;i<16;i++)
+		M[i] = (in[i*4+3]<<24) | (in[i*4+2]<<16) |
+			(in[i*4+1]<<8) | (in[i*4+0]<<0);
+}
+
+static void copy4(unsigned char *out,uint32 x)
+{
+	out[0] = x&0xFF;
+	out[1] = (x>>8)&0xFF;
+	out[2] = (x>>16)&0xFF;
+	out[3] = (x>>24)&0xFF;
+}
+
+void mdfour_begin(struct mdfour *md)
+{
+	md->A = 0x67452301;
+	md->B = 0xefcdab89;
+	md->C = 0x98badcfe;
+	md->D = 0x10325476;
+	md->totalN = 0;
+}
+
+
+static void mdfour_tail(unsigned char *in, int n)
+{
+	unsigned char buf[128];
+	uint32 M[16];
+	uint32 b;
+
+	m->totalN += n;
+
+	b = m->totalN * 8;
+
+	memset(buf, 0, 128);
+	if (n) memcpy(buf, in, n);
+	buf[n] = 0x80;
+
+	if (n <= 55) {
+		copy4(buf+56, b);
+		copy64(M, buf);
+		mdfour64(M);
+	} else {
+		copy4(buf+120, b); 
+		copy64(M, buf);
+		mdfour64(M);
+		copy64(M, buf+64);
+		mdfour64(M);
+	}
+}
+
+void mdfour_update(struct mdfour *md, unsigned char *in, int n)
+{
+	uint32 M[16];
+
+	if (n == 0) mdfour_tail(in, n);
+
+	m = md;
+
+	while (n >= 64) {
+		copy64(M, in);
+		mdfour64(M);
+		in += 64;
+		n -= 64;
+		m->totalN += 64;
+	}
+
+	if (n) mdfour_tail(in, n);
+}
+
+
+void mdfour_result(struct mdfour *md, unsigned char *out)
+{
+	m = md;
+
+	copy4(out, m->A);
+	copy4(out+4, m->B);
+	copy4(out+8, m->C);
+	copy4(out+12, m->D);
+}
+
+
+void mdfour(unsigned char *out, unsigned char *in, int n)
+{
+	struct mdfour md;
+	mdfour_begin(&md);
+	mdfour_update(&md, in, n);
+	mdfour_result(&md, out);
+}
+
+#ifdef TEST_MDFOUR
+static void file_checksum1(char *fname)
+{
+	int fd, i;
+	struct mdfour md;
+	unsigned char buf[64], sum[16];
+
+	fd = open(fname,O_RDONLY);
+	if (fd == -1) {
+		perror("fname");
+		exit(1);
+	}
+	
+	mdfour_begin(&md);
+
+	while (1) {
+		int n = read(fd, buf, sizeof(buf));
+		if (n <= 0) break;
+		mdfour_update(&md, buf, n);
+	}
+
+	close(fd);
+
+	mdfour_result(&md, sum);
+
+	for (i=0;i<16;i++)
+		printf("%02X", sum[i]);
+	printf("\n");
+}
+
+#include "../md4.h"
+
+static void file_checksum2(char *fname)
+{
+	int fd, i;
+	MDstruct md;
+	unsigned char buf[64], sum[16];
+
+	fd = open(fname,O_RDONLY);
+	if (fd == -1) {
+		perror("fname");
+		exit(1);
+	}
+	
+	MDbegin(&md);
+
+	while (1) {
+		int n = read(fd, buf, sizeof(buf));
+		if (n <= 0) break;
+		MDupdate(&md, buf, n*8);
+	}
+
+	if (!md.done) {
+		MDupdate(&md, buf, 0);
+	}
+
+	close(fd);
+
+	memcpy(sum, md.buffer, 16);
+
+	for (i=0;i<16;i++)
+		printf("%02X", sum[i]);
+	printf("\n");
+}
+
+ int main(int argc, char *argv[])
+{
+	file_checksum1(argv[1]);
+	file_checksum2(argv[1]);
+	return 0;
+}
+#endif

lib/mdfour.h

@@ -0,0 +1,34 @@
+/* 
+   Unix SMB/Netbios implementation.
+   Version 1.9.
+   a implementation of MD4 designed for use in the SMB authentication protocol
+   Copyright (C) Andrew Tridgell 1997-1998.
+   
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+   
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+struct mdfour {
+	uint32 A, B, C, D;
+	uint32 totalN;
+};
+
+void mdfour_begin(struct mdfour *md);
+void mdfour_update(struct mdfour *md, unsigned char *in, int n);
+void mdfour_result(struct mdfour *md, unsigned char *out);
+void mdfour(unsigned char *out, unsigned char *in, int n);
+
+
+
+

lib/snprintf.c

@@ -0,0 +1,820 @@
+/*
+ * Copyright Patrick Powell 1995
+ * This code is based on code written by Patrick Powell (papowell@astart.com)
+ * It may be used for any purpose as long as this notice remains intact
+ * on all source code distributions
+ */
+
+/**************************************************************
+ * Original:
+ * Patrick Powell Tue Apr 11 09:48:21 PDT 1995
+ * A bombproof version of doprnt (dopr) included.
+ * Sigh.  This sort of thing is always nasty do deal with.  Note that
+ * the version here does not include floating point...
+ *
+ * snprintf() is used instead of sprintf() as it does limit checks
+ * for string length.  This covers a nasty loophole.
+ *
+ * The other functions are there to prevent NULL pointers from
+ * causing nast effects.
+ *
+ * More Recently:
+ *  Brandon Long <blong@fiction.net> 9/15/96 for mutt 0.43
+ *  This was ugly.  It is still ugly.  I opted out of floating point
+ *  numbers, but the formatter understands just about everything
+ *  from the normal C string format, at least as far as I can tell from
+ *  the Solaris 2.5 printf(3S) man page.
+ *
+ *  Brandon Long <blong@fiction.net> 10/22/97 for mutt 0.87.1
+ *    Ok, added some minimal floating point support, which means this
+ *    probably requires libm on most operating systems.  Don't yet
+ *    support the exponent (e,E) and sigfig (g,G).  Also, fmtint()
+ *    was pretty badly broken, it just wasn't being exercised in ways
+ *    which showed it, so that's been fixed.  Also, formated the code
+ *    to mutt conventions, and removed dead code left over from the
+ *    original.  Also, there is now a builtin-test, just compile with:
+ *           gcc -DTEST_SNPRINTF -o snprintf snprintf.c -lm
+ *    and run snprintf for results.
+ * 
+ *  Thomas Roessler <roessler@guug.de> 01/27/98 for mutt 0.89i
+ *    The PGP code was using unsigned hexadecimal formats. 
+ *    Unfortunately, unsigned formats simply didn't work.
+ *
+ *  Michael Elkins <me@cs.hmc.edu> 03/05/98 for mutt 0.90.8
+ *    The original code assumed that both snprintf() and vsnprintf() were
+ *    missing.  Some systems only have snprintf() but not vsnprintf(), so
+ *    the code is now broken down under HAVE_SNPRINTF and HAVE_VSNPRINTF.
+ *
+ *  Andrew Tridgell (tridge@samba.anu.edu.au) Oct 1998
+ *    fixed handling of %.0f
+ *    added test for HAVE_LONG_DOUBLE
+ *
+ **************************************************************/
+
+#include "config.h"
+
+#include <string.h>
+# include <ctype.h>
+#include <sys/types.h>
+
+#if !defined(HAVE_SNPRINTF) || !defined(HAVE_VSNPRINTF)
+
+/* Define this as a fall through, HAVE_STDARG_H is probably already set */
+
+#define HAVE_VARARGS_H
+
+/* varargs declarations: */
+
+#if defined(HAVE_STDARG_H)
+# include <stdarg.h>
+# define HAVE_STDARGS    /* let's hope that works everywhere (mj) */
+# define VA_LOCAL_DECL   va_list ap
+# define VA_START(f)     va_start(ap, f)
+# define VA_SHIFT(v,t)  ;   /* no-op for ANSI */
+# define VA_END          va_end(ap)
+#else
+# if defined(HAVE_VARARGS_H)
+#  include <varargs.h>
+#  undef HAVE_STDARGS
+#  define VA_LOCAL_DECL   va_list ap
+#  define VA_START(f)     va_start(ap)      /* f is ignored! */
+#  define VA_SHIFT(v,t) v = va_arg(ap,t)
+#  define VA_END        va_end(ap)
+# else
+/*XX ** NO VARARGS ** XX*/
+# endif
+#endif
+
+#ifdef HAVE_LONG_DOUBLE
+#define LDOUBLE long double
+#else
+#define LDOUBLE double
+#endif
+
+/*int snprintf (char *str, size_t count, const char *fmt, ...);*/
+/*int vsnprintf (char *str, size_t count, const char *fmt, va_list arg);*/
+
+static void dopr (char *buffer, size_t maxlen, const char *format, 
+                  va_list args);
+static void fmtstr (char *buffer, size_t *currlen, size_t maxlen,
+		    char *value, int flags, int min, int max);
+static void fmtint (char *buffer, size_t *currlen, size_t maxlen,
+		    long value, int base, int min, int max, int flags);
+static void fmtfp (char *buffer, size_t *currlen, size_t maxlen,
+		   LDOUBLE fvalue, int min, int max, int flags);
+static void dopr_outch (char *buffer, size_t *currlen, size_t maxlen, char c );
+
+/*
+ * dopr(): poor man's version of doprintf
+ */
+
+/* format read states */
+#define DP_S_DEFAULT 0
+#define DP_S_FLAGS   1
+#define DP_S_MIN     2
+#define DP_S_DOT     3
+#define DP_S_MAX     4
+#define DP_S_MOD     5
+#define DP_S_CONV    6
+#define DP_S_DONE    7
+
+/* format flags - Bits */
+#define DP_F_MINUS 	(1 << 0)
+#define DP_F_PLUS  	(1 << 1)
+#define DP_F_SPACE 	(1 << 2)
+#define DP_F_NUM   	(1 << 3)
+#define DP_F_ZERO  	(1 << 4)
+#define DP_F_UP    	(1 << 5)
+#define DP_F_UNSIGNED 	(1 << 6)
+
+/* Conversion Flags */
+#define DP_C_SHORT   1
+#define DP_C_LONG    2
+#define DP_C_LDOUBLE 3
+
+#define char_to_int(p) (p - '0')
+#define MAX(p,q) ((p >= q) ? p : q)
+
+static void dopr (char *buffer, size_t maxlen, const char *format, va_list args)
+{
+  char ch;
+  long value;
+  LDOUBLE fvalue;
+  char *strvalue;
+  int min;
+  int max;
+  int state;
+  int flags;
+  int cflags;
+  size_t currlen;
+  
+  state = DP_S_DEFAULT;
+  currlen = flags = cflags = min = 0;
+  max = -1;
+  ch = *format++;
+
+  while (state != DP_S_DONE)
+  {
+    if ((ch == '\0') || (currlen >= maxlen)) 
+      state = DP_S_DONE;
+
+    switch(state) 
+    {
+    case DP_S_DEFAULT:
+      if (ch == '%') 
+	state = DP_S_FLAGS;
+      else 
+	dopr_outch (buffer, &currlen, maxlen, ch);
+      ch = *format++;
+      break;
+    case DP_S_FLAGS:
+      switch (ch) 
+      {
+      case '-':
+	flags |= DP_F_MINUS;
+        ch = *format++;
+	break;
+      case '+':
+	flags |= DP_F_PLUS;
+        ch = *format++;
+	break;
+      case ' ':
+	flags |= DP_F_SPACE;
+        ch = *format++;
+	break;
+      case '#':
+	flags |= DP_F_NUM;
+        ch = *format++;
+	break;
+      case '0':
+	flags |= DP_F_ZERO;
+        ch = *format++;
+	break;
+      default:
+	state = DP_S_MIN;
+	break;
+      }
+      break;
+    case DP_S_MIN:
+      if (isdigit((unsigned char)ch)) 
+      {
+	min = 10*min + char_to_int (ch);
+	ch = *format++;
+      } 
+      else if (ch == '*') 
+      {
+	min = va_arg (args, int);
+	ch = *format++;
+	state = DP_S_DOT;
+      } 
+      else 
+	state = DP_S_DOT;
+      break;
+    case DP_S_DOT:
+      if (ch == '.') 
+      {
+	state = DP_S_MAX;
+	ch = *format++;
+      } 
+      else 
+	state = DP_S_MOD;
+      break;
+    case DP_S_MAX:
+      if (isdigit((unsigned char)ch)) 
+      {
+	if (max < 0)
+	  max = 0;
+	max = 10*max + char_to_int (ch);
+	ch = *format++;
+      } 
+      else if (ch == '*') 
+      {
+	max = va_arg (args, int);
+	ch = *format++;
+	state = DP_S_MOD;
+      } 
+      else 
+	state = DP_S_MOD;
+      break;
+    case DP_S_MOD:
+      /* Currently, we don't support Long Long, bummer */
+      switch (ch) 
+      {
+      case 'h':
+	cflags = DP_C_SHORT;
+	ch = *format++;
+	break;
+      case 'l':
+	cflags = DP_C_LONG;
+	ch = *format++;
+	break;
+      case 'L':
+	cflags = DP_C_LDOUBLE;
+	ch = *format++;
+	break;
+      default:
+	break;
+      }
+      state = DP_S_CONV;
+      break;
+    case DP_S_CONV:
+      switch (ch) 
+      {
+      case 'd':
+      case 'i':
+	if (cflags == DP_C_SHORT) 
+	  value = va_arg (args, short int);
+	else if (cflags == DP_C_LONG)
+	  value = va_arg (args, long int);
+	else
+	  value = va_arg (args, int);
+	fmtint (buffer, &currlen, maxlen, value, 10, min, max, flags);
+	break;
+      case 'o':
+	flags |= DP_F_UNSIGNED;
+	if (cflags == DP_C_SHORT)
+	  value = va_arg (args, unsigned short int);
+	else if (cflags == DP_C_LONG)
+	  value = (long)va_arg (args, unsigned long int);
+	else
+	  value = (long)va_arg (args, unsigned int);
+	fmtint (buffer, &currlen, maxlen, value, 8, min, max, flags);
+	break;
+      case 'u':
+	flags |= DP_F_UNSIGNED;
+	if (cflags == DP_C_SHORT)
+	  value = va_arg (args, unsigned short int);
+	else if (cflags == DP_C_LONG)
+	  value = (long)va_arg (args, unsigned long int);
+	else
+	  value = (long)va_arg (args, unsigned int);
+	fmtint (buffer, &currlen, maxlen, value, 10, min, max, flags);
+	break;
+      case 'X':
+	flags |= DP_F_UP;
+      case 'x':
+	flags |= DP_F_UNSIGNED;
+	if (cflags == DP_C_SHORT)
+	  value = va_arg (args, unsigned short int);
+	else if (cflags == DP_C_LONG)
+	  value = (long)va_arg (args, unsigned long int);
+	else
+	  value = (long)va_arg (args, unsigned int);
+	fmtint (buffer, &currlen, maxlen, value, 16, min, max, flags);
+	break;
+      case 'f':
+	if (cflags == DP_C_LDOUBLE)
+	  fvalue = va_arg (args, LDOUBLE);
+	else
+	  fvalue = va_arg (args, double);
+	/* um, floating point? */
+	fmtfp (buffer, &currlen, maxlen, fvalue, min, max, flags);
+	break;
+      case 'E':
+	flags |= DP_F_UP;
+      case 'e':
+	if (cflags == DP_C_LDOUBLE)
+	  fvalue = va_arg (args, LDOUBLE);
+	else
+	  fvalue = va_arg (args, double);
+	break;
+      case 'G':
+	flags |= DP_F_UP;
+      case 'g':
+	if (cflags == DP_C_LDOUBLE)
+	  fvalue = va_arg (args, LDOUBLE);
+	else
+	  fvalue = va_arg (args, double);
+	break;
+      case 'c':
+	dopr_outch (buffer, &currlen, maxlen, va_arg (args, int));
+	break;
+      case 's':
+	strvalue = va_arg (args, char *);
+	if (max < 0) 
+	  max = maxlen; /* ie, no max */
+	fmtstr (buffer, &currlen, maxlen, strvalue, flags, min, max);
+	break;
+      case 'p':
+	strvalue = va_arg (args, void *);
+	fmtint (buffer, &currlen, maxlen, (long) strvalue, 16, min, max, flags);
+	break;
+      case 'n':
+	if (cflags == DP_C_SHORT) 
+	{
+	  short int *num;
+	  num = va_arg (args, short int *);
+	  *num = currlen;
+        } 
+	else if (cflags == DP_C_LONG) 
+	{
+	  long int *num;
+	  num = va_arg (args, long int *);
+	  *num = (long int)currlen;
+        } 
+	else 
+	{
+	  int *num;
+	  num = va_arg (args, int *);
+	  *num = currlen;
+        }
+	break;
+      case '%':
+	dopr_outch (buffer, &currlen, maxlen, ch);
+	break;
+      case 'w':
+	/* not supported yet, treat as next char */
+	ch = *format++;
+	break;
+      default:
+	/* Unknown, skip */
+	break;
+      }
+      ch = *format++;
+      state = DP_S_DEFAULT;
+      flags = cflags = min = 0;
+      max = -1;
+      break;
+    case DP_S_DONE:
+      break;
+    default:
+      /* hmm? */
+      break; /* some picky compilers need this */
+    }
+  }
+  if (currlen < maxlen - 1) 
+    buffer[currlen] = '\0';
+  else 
+    buffer[maxlen - 1] = '\0';
+}
+
+static void fmtstr (char *buffer, size_t *currlen, size_t maxlen,
+		    char *value, int flags, int min, int max)
+{
+  int padlen, strln;     /* amount to pad */
+  int cnt = 0;
+  
+  if (value == 0)
+  {
+    value = "<NULL>";
+  }
+
+  for (strln = 0; value[strln]; ++strln); /* strlen */
+  padlen = min - strln;
+  if (padlen < 0) 
+    padlen = 0;
+  if (flags & DP_F_MINUS) 
+    padlen = -padlen; /* Left Justify */
+
+  while ((padlen > 0) && (cnt < max)) 
+  {
+    dopr_outch (buffer, currlen, maxlen, ' ');
+    --padlen;
+    ++cnt;
+  }
+  while (*value && (cnt < max)) 
+  {
+    dopr_outch (buffer, currlen, maxlen, *value++);
+    ++cnt;
+  }
+  while ((padlen < 0) && (cnt < max)) 
+  {
+    dopr_outch (buffer, currlen, maxlen, ' ');
+    ++padlen;
+    ++cnt;
+  }
+}
+
+/* Have to handle DP_F_NUM (ie 0x and 0 alternates) */
+
+static void fmtint (char *buffer, size_t *currlen, size_t maxlen,
+		    long value, int base, int min, int max, int flags)
+{
+  int signvalue = 0;
+  unsigned long uvalue;
+  char convert[20];
+  int place = 0;
+  int spadlen = 0; /* amount to space pad */
+  int zpadlen = 0; /* amount to zero pad */
+  int caps = 0;
+  
+  if (max < 0)
+    max = 0;
+
+  uvalue = value;
+
+  if(!(flags & DP_F_UNSIGNED))
+  {
+    if( value < 0 ) {
+      signvalue = '-';
+      uvalue = -value;
+    }
+    else
+      if (flags & DP_F_PLUS)  /* Do a sign (+/i) */
+	signvalue = '+';
+    else
+      if (flags & DP_F_SPACE)
+	signvalue = ' ';
+  }
+  
+  if (flags & DP_F_UP) caps = 1; /* Should characters be upper case? */
+
+  do {
+    convert[place++] =
+      (caps? "0123456789ABCDEF":"0123456789abcdef")
+      [uvalue % (unsigned)base  ];
+    uvalue = (uvalue / (unsigned)base );
+  } while(uvalue && (place < 20));
+  if (place == 20) place--;
+  convert[place] = 0;
+
+  zpadlen = max - place;
+  spadlen = min - MAX (max, place) - (signvalue ? 1 : 0);
+  if (zpadlen < 0) zpadlen = 0;
+  if (spadlen < 0) spadlen = 0;
+  if (flags & DP_F_ZERO)
+  {
+    zpadlen = MAX(zpadlen, spadlen);
+    spadlen = 0;
+  }
+  if (flags & DP_F_MINUS) 
+    spadlen = -spadlen; /* Left Justifty */
+
+#ifdef DEBUG_SNPRINTF
+  printf("zpad: %d, spad: %d, min: %d, max: %d, place: %d\n",
+	 zpadlen, spadlen, min, max, place);
+#endif
+
+  /* Spaces */
+  while (spadlen > 0) 
+  {
+    dopr_outch (buffer, currlen, maxlen, ' ');
+    --spadlen;
+  }
+
+  /* Sign */
+  if (signvalue) 
+    dopr_outch (buffer, currlen, maxlen, signvalue);
+
+  /* Zeros */
+  if (zpadlen > 0) 
+  {
+    while (zpadlen > 0)
+    {
+      dopr_outch (buffer, currlen, maxlen, '0');
+      --zpadlen;
+    }
+  }
+
+  /* Digits */
+  while (place > 0) 
+    dopr_outch (buffer, currlen, maxlen, convert[--place]);
+  
+  /* Left Justified spaces */
+  while (spadlen < 0) {
+    dopr_outch (buffer, currlen, maxlen, ' ');
+    ++spadlen;
+  }
+}
+
+static LDOUBLE abs_val (LDOUBLE value)
+{
+  LDOUBLE result = value;
+
+  if (value < 0)
+    result = -value;
+
+  return result;
+}
+
+static LDOUBLE pow10 (int exp)
+{
+  LDOUBLE result = 1;
+
+  while (exp)
+  {
+    result *= 10;
+    exp--;
+  }
+  
+  return result;
+}
+
+static long round (LDOUBLE value)
+{
+  long intpart;
+
+  intpart = (long)value;
+  value = value - intpart;
+  if (value >= 0.5)
+    intpart++;
+
+  return intpart;
+}
+
+static void fmtfp (char *buffer, size_t *currlen, size_t maxlen,
+		   LDOUBLE fvalue, int min, int max, int flags)
+{
+  int signvalue = 0;
+  LDOUBLE ufvalue;
+  char iconvert[20];
+  char fconvert[20];
+  int iplace = 0;
+  int fplace = 0;
+  int padlen = 0; /* amount to pad */
+  int zpadlen = 0; 
+  int caps = 0;
+  long intpart;
+  long fracpart;
+  
+  /* 
+   * AIX manpage says the default is 0, but Solaris says the default
+   * is 6, and sprintf on AIX defaults to 6
+   */
+  if (max < 0)
+    max = 6;
+
+  ufvalue = abs_val (fvalue);
+
+  if (fvalue < 0)
+    signvalue = '-';
+  else
+    if (flags & DP_F_PLUS)  /* Do a sign (+/i) */
+      signvalue = '+';
+    else
+      if (flags & DP_F_SPACE)
+	signvalue = ' ';
+
+#if 0
+  if (flags & DP_F_UP) caps = 1; /* Should characters be upper case? */
+#endif
+
+  intpart = (long)ufvalue;
+
+  /* 
+   * Sorry, we only support 9 digits past the decimal because of our 
+   * conversion method
+   */
+  if (max > 9)
+    max = 9;
+
+  /* We "cheat" by converting the fractional part to integer by
+   * multiplying by a factor of 10
+   */
+  fracpart = round ((pow10 (max)) * (ufvalue - intpart));
+
+  if (fracpart >= pow10 (max))
+  {
+    intpart++;
+    fracpart -= pow10 (max);
+  }
+
+#ifdef DEBUG_SNPRINTF
+  printf("fmtfp: %g %d.%d min=%d max=%d\n", 
+	 (double)fvalue, intpart, fracpart, min, max);
+#endif
+
+  /* Convert integer part */
+  do {
+    iconvert[iplace++] =
+      (caps? "0123456789ABCDEF":"0123456789abcdef")[intpart % 10];
+    intpart = (intpart / 10);
+  } while(intpart && (iplace < 20));
+  if (iplace == 20) iplace--;
+  iconvert[iplace] = 0;
+
+  /* Convert fractional part */
+  do {
+    fconvert[fplace++] =
+      (caps? "0123456789ABCDEF":"0123456789abcdef")[fracpart % 10];
+    fracpart = (fracpart / 10);
+  } while(fracpart && (fplace < 20));
+  if (fplace == 20) fplace--;
+  fconvert[fplace] = 0;
+
+  /* -1 for decimal point, another -1 if we are printing a sign */
+  padlen = min - iplace - max - 1 - ((signvalue) ? 1 : 0); 
+  zpadlen = max - fplace;
+  if (zpadlen < 0)
+    zpadlen = 0;
+  if (padlen < 0) 
+    padlen = 0;
+  if (flags & DP_F_MINUS) 
+    padlen = -padlen; /* Left Justifty */
+
+  if ((flags & DP_F_ZERO) && (padlen > 0)) 
+  {
+    if (signvalue) 
+    {
+      dopr_outch (buffer, currlen, maxlen, signvalue);
+      --padlen;
+      signvalue = 0;
+    }
+    while (padlen > 0)
+    {
+      dopr_outch (buffer, currlen, maxlen, '0');
+      --padlen;
+    }
+  }
+  while (padlen > 0)
+  {
+    dopr_outch (buffer, currlen, maxlen, ' ');
+    --padlen;
+  }
+  if (signvalue) 
+    dopr_outch (buffer, currlen, maxlen, signvalue);
+
+  while (iplace > 0) 
+    dopr_outch (buffer, currlen, maxlen, iconvert[--iplace]);
+
+
+#ifdef DEBUG_SNPRINTF
+  printf("fmtfp: fplace=%d zpadlen=%d\n", fplace, zpadlen);
+#endif
+
+  /*
+   * Decimal point.  This should probably use locale to find the correct
+   * char to print out.
+   */
+  if (max > 0) {
+	  dopr_outch (buffer, currlen, maxlen, '.');
+
+	  while (fplace > 0) 
+		  dopr_outch (buffer, currlen, maxlen, fconvert[--fplace]);
+  }
+
+  while (zpadlen > 0)
+  {
+    dopr_outch (buffer, currlen, maxlen, '0');
+    --zpadlen;
+  }
+
+  while (padlen < 0) 
+  {
+    dopr_outch (buffer, currlen, maxlen, ' ');
+    ++padlen;
+  }
+}
+
+static void dopr_outch (char *buffer, size_t *currlen, size_t maxlen, char c)
+{
+  if (*currlen < maxlen)
+    buffer[(*currlen)++] = c;
+}
+#endif /* !defined(HAVE_SNPRINTF) || !defined(HAVE_VSNPRINTF) */
+
+#ifndef HAVE_VSNPRINTF
+ int vsnprintf (char *str, size_t count, const char *fmt, va_list args)
+{
+  str[0] = 0;
+  dopr(str, count, fmt, args);
+  return(strlen(str));
+}
+#endif /* !HAVE_VSNPRINTF */
+
+#ifndef HAVE_SNPRINTF
+/* VARARGS3 */
+#ifdef HAVE_STDARGS
+ int snprintf (char *str,size_t count,const char *fmt,...)
+#else
+ int snprintf (va_alist) va_dcl
+#endif
+{
+#ifndef HAVE_STDARGS
+  char *str;
+  size_t count;
+  char *fmt;
+#endif
+  VA_LOCAL_DECL;
+    
+  VA_START (fmt);
+  VA_SHIFT (str, char *);
+  VA_SHIFT (count, size_t );
+  VA_SHIFT (fmt, char *);
+  (void) vsnprintf(str, count, fmt, ap);
+  VA_END;
+  return(strlen(str));
+}
+
+
+#else
+ /* keep compilers happy about empty files */
+ void dummy_snprintf(void) {}
+#endif /* !HAVE_SNPRINTF */
+
+#ifdef TEST_SNPRINTF
+#ifndef LONG_STRING
+#define LONG_STRING 1024
+#endif
+ int main (void)
+{
+  char buf1[LONG_STRING];
+  char buf2[LONG_STRING];
+  char *fp_fmt[] = {
+    "%-1.5f",
+    "%1.5f",
+    "%123.9f",
+    "%10.5f",
+    "% 10.5f",
+    "%+22.9f",
+    "%+4.9f",
+    "%01.3f",
+    "%4f",
+    "%3.1f",
+    "%3.2f",
+    "%.0f",
+    "%.1f",
+    NULL
+  };
+  double fp_nums[] = { -1.5, 134.21, 91340.2, 341.1234, 0203.9, 0.96, 0.996, 
+    0.9996, 1.996, 4.136, 0};
+  char *int_fmt[] = {
+    "%-1.5d",
+    "%1.5d",
+    "%123.9d",
+    "%5.5d",
+    "%10.5d",
+    "% 10.5d",
+    "%+22.33d",
+    "%01.3d",
+    "%4d",
+    NULL
+  };
+  long int_nums[] = { -1, 134, 91340, 341, 0203, 0};
+  int x, y;
+  int fail = 0;
+  int num = 0;
+
+  printf ("Testing snprintf format codes against system sprintf...\n");
+
+  for (x = 0; fp_fmt[x] != NULL ; x++)
+    for (y = 0; fp_nums[y] != 0 ; y++)
+    {
+      snprintf (buf1, sizeof (buf1), fp_fmt[x], fp_nums[y]);
+      sprintf (buf2, fp_fmt[x], fp_nums[y]);
+      if (strcmp (buf1, buf2))
+      {
+	printf("snprintf doesn't match Format: %s\n\tsnprintf = %s\n\tsprintf  = %s\n", 
+	    fp_fmt[x], buf1, buf2);
+	fail++;
+      }
+      num++;
+    }
+
+  for (x = 0; int_fmt[x] != NULL ; x++)
+    for (y = 0; int_nums[y] != 0 ; y++)
+    {
+      snprintf (buf1, sizeof (buf1), int_fmt[x], int_nums[y]);
+      sprintf (buf2, int_fmt[x], int_nums[y]);
+      if (strcmp (buf1, buf2))
+      {
+	printf("snprintf doesn't match Format: %s\n\tsnprintf = %s\n\tsprintf  = %s\n", 
+	    int_fmt[x], buf1, buf2);
+	fail++;
+      }
+      num++;
+    }
+  printf ("%d tests failed out of %d.\n", fail, num);
+}
+#endif /* SNPRINTF_TEST */
+

lib/zlib.h

@@ -1,632 +0,0 @@
-/*	$Id$	*/
-
-/*
- * This file is derived from zlib.h and zconf.h from the zlib-0.95
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.
- */
-
-/* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 0.95, Aug 16th, 1995.
-
-  Copyright (C) 1995 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  gzip@prep.ai.mit.edu    madler@alumni.caltech.edu
- */
-
-#ifndef _ZLIB_H
-#define _ZLIB_H
-
-/* #include "zconf.h" */	/* included directly here */
-
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */
-
-/*
-     The library does not install any signal handler. It is recommended to
-  add at least a handler for SIGSEGV when decompressing; the library checks
-  the consistency of the input data whenever possible but may go nuts
-  for some forms of corrupted input.
- */
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints
- * at addresses which are not a multiple of their size.
- * Under DOS, -DFAR=far or -DFAR=__far may be needed.
- */
-
-#ifndef STDC
-#  if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus)
-#    define STDC
-#  endif
-#endif
-
-#ifdef	__MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */
-#  include <unix.h>
-#endif
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-#  ifdef MAXSEG_64K
-#    define MAX_MEM_LEVEL 8
-#  else
-#    define MAX_MEM_LEVEL 9
-#  endif
-#endif
-
-#ifndef FAR
-#  define FAR
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
-#ifndef MAX_WBITS
-#  define MAX_WBITS   15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
-            1 << (windowBits+2)   +  1 << (memLevel+9)
- that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
-     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
-   The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
- for small objects.
-*/
-
-                        /* Type declarations */
-
-#ifndef OF /* function prototypes */
-#  ifdef STDC
-#    define OF(args)  args
-#  else
-#    define OF(args)  ()
-#  endif
-#endif
-
-typedef unsigned char  Byte;  /* 8 bits */
-typedef unsigned int   uInt;  /* 16 bits or more */
-typedef int32 Long; /* 32 bits or more */
-typedef uint32 uLong; /* 32 bits or more */
-
-typedef Byte FAR Bytef;
-typedef char FAR charf;
-typedef int FAR intf;
-typedef uInt FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
-   typedef void FAR *voidpf;
-   typedef void     *voidp;
-#else
-   typedef Byte FAR *voidpf;
-   typedef Byte     *voidp;
-#endif
-
-/* end of original zconf.h */
-
-#define ZLIB_VERSION "0.95P"
-
-/* 
-     The 'zlib' compression library provides in-memory compression and
-  decompression functions, including integrity checks of the uncompressed
-  data.  This version of the library supports only one compression method
-  (deflation) but other algorithms may be added later and will have the same
-  stream interface.
-
-     For compression the application must provide the output buffer and
-  may optionally provide the input buffer for optimization. For decompression,
-  the application must provide the input buffer and may optionally provide
-  the output buffer for optimization.
-
-     Compression can be done in a single step if the buffers are large
-  enough (for example if an input file is mmap'ed), or can be done by
-  repeated calls of the compression function.  In the latter case, the
-  application must provide more input and/or consume the output
-  (providing more output space) before each call.
-*/
-
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void   (*free_func)  OF((voidpf opaque, voidpf address, uInt nbytes));
-
-struct internal_state;
-
-typedef struct z_stream_s {
-    Bytef    *next_in;  /* next input byte */
-    uInt     avail_in;  /* number of bytes available at next_in */
-    uLong    total_in;  /* total nb of input bytes read so far */
-
-    Bytef    *next_out; /* next output byte should be put there */
-    uInt     avail_out; /* remaining free space at next_out */
-    uLong    total_out; /* total nb of bytes output so far */
-
-    char     *msg;      /* last error message, NULL if no error */
-    struct internal_state FAR *state; /* not visible by applications */
-
-    alloc_func zalloc;  /* used to allocate the internal state */
-    free_func  zfree;   /* used to free the internal state */
-    voidp      opaque;  /* private data object passed to zalloc and zfree */
-
-    Byte     data_type; /* best guess about the data type: ascii or binary */
-
-} z_stream;
-
-/*
-   The application must update next_in and avail_in when avail_in has
-   dropped to zero. It must update next_out and avail_out when avail_out
-   has dropped to zero. The application must initialize zalloc, zfree and
-   opaque before calling the init function. All other fields are set by the
-   compression library and must not be updated by the application.
-
-   The opaque value provided by the application will be passed as the first
-   parameter for calls of zalloc and zfree. This can be useful for custom
-   memory management. The compression library attaches no meaning to the
-   opaque value.
-
-   zalloc must return Z_NULL if there is not enough memory for the object.
-   On 16-bit systems, the functions zalloc and zfree must be able to allocate
-   exactly 65536 bytes, but will not be required to allocate more than this
-   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
-   pointers returned by zalloc for objects of exactly 65536 bytes *must*
-   have their offset normalized to zero. The default allocation function
-   provided by this library ensures this (see zutil.c). To reduce memory
-   requirements and avoid any allocation of 64K objects, at the expense of
-   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
-   The fields total_in and total_out can be used for statistics or
-   progress reports. After compression, total_in holds the total size of
-   the uncompressed data and may be saved for use in the decompressor
-   (particularly if the decompressor wants to decompress everything in
-   a single step).
-*/
-
-                        /* constants */
-
-#define Z_NO_FLUSH      0
-#define Z_PARTIAL_FLUSH 1
-#define Z_FULL_FLUSH    2
-#define Z_SYNC_FLUSH    3 /* experimental: partial_flush + byte align */
-#define Z_FINISH        4
-#define Z_PACKET_FLUSH	5
-#define Z_INSERT_ONLY	6 /* update hash table etc., produce no output */
-/* See deflate() below for the usage of these constants */
-
-#define Z_OK            0
-#define Z_STREAM_END    1
-#define Z_ERRNO        (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR   (-3)
-#define Z_MEM_ERROR    (-4)
-#define Z_BUF_ERROR    (-5)
-/* error codes for the compression/decompression functions */
-
-#define Z_BEST_SPEED             1
-#define Z_BEST_COMPRESSION       9
-#define Z_DEFAULT_COMPRESSION  (-1)
-/* compression levels */
-
-#define Z_FILTERED            1
-#define Z_HUFFMAN_ONLY        2
-#define Z_DEFAULT_STRATEGY    0
-
-#define Z_BINARY   0
-#define Z_ASCII    1
-#define Z_UNKNOWN  2
-/* Used to set the data_type field */
-
-#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
-
-extern char *zlib_version;
-/* The application can compare zlib_version and ZLIB_VERSION for consistency.
-   If the first character differs, the library code actually used is
-   not compatible with the zlib.h header file used by the application.
- */
-
-                        /* basic functions */
-
-extern int deflateInit OF((z_stream *strm, int level));
-/* 
-     Initializes the internal stream state for compression. The fields
-   zalloc, zfree and opaque must be initialized before by the caller.
-   If zalloc and zfree are set to Z_NULL, deflateInit updates them to
-   use default allocation functions.
-
-     The compression level must be Z_DEFAULT_COMPRESSION, or between 1 and 9:
-   1 gives best speed, 9 gives best compression. Z_DEFAULT_COMPRESSION requests
-   a default compromise between speed and compression (currently equivalent
-   to level 6).
-
-     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if level is not a valid compression level.
-   msg is set to null if there is no error message.  deflateInit does not
-   perform any compression: this will be done by deflate().
-*/
-
-
-extern int deflate OF((z_stream *strm, int flush));
-/*
-  Performs one or both of the following actions:
-
-  - Compress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in and avail_in are updated and
-    processing will resume at this point for the next call of deflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly. This action is forced if the parameter flush is non zero.
-    Forcing flush frequently degrades the compression ratio, so this parameter
-    should be set only when necessary (in interactive applications).
-    Some output may be provided even if flush is not set.
-
-  Before the call of deflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating avail_in or avail_out accordingly; avail_out
-  should never be zero before the call. The application can consume the
-  compressed output when it wants, for example when the output buffer is full
-  (avail_out == 0), or after each call of deflate().
-
-    If the parameter flush is set to Z_PARTIAL_FLUSH, the current compression
-  block is terminated and flushed to the output buffer so that the
-  decompressor can get all input data available so far. For method 9, a future
-  variant on method 8, the current block will be flushed but not terminated.
-  If flush is set to Z_FULL_FLUSH, the compression block is terminated, a
-  special marker is output and the compression dictionary is discarded; this
-  is useful to allow the decompressor to synchronize if one compressed block
-  has been damaged (see inflateSync below).  Flushing degrades compression and
-  so should be used only when necessary.  Using Z_FULL_FLUSH too often can
-  seriously degrade the compression. If deflate returns with avail_out == 0,
-  this function must be called again with the same value of the flush
-  parameter and more output space (updated avail_out), until the flush is
-  complete (deflate returns with non-zero avail_out).
-
-    If the parameter flush is set to Z_PACKET_FLUSH, the compression
-  block is terminated, and a zero-length stored block is output,
-  omitting the length bytes (the effect of this is that the 3-bit type
-  code 000 for a stored block is output, and the output is then
-  byte-aligned).  This is designed for use at the end of a PPP packet.
-  In addition, if the current compression block contains all the data
-  since the last Z_PACKET_FLUSH, it is never output as a stored block.
-  If the current compression block output as a static or dynamic block
-  would not be at least `minCompression' bytes smaller than the
-  original data, then nothing is output for that block.  (The type
-  code for the zero-length stored block is still output, resulting in
-  a single zero byte being output for the whole packet.)
-  `MinCompression' is a parameter to deflateInit2, or 0 if deflateInit
-  is used.
-
-    If the parameter flush is set to Z_FINISH, all pending input is processed,
-  all pending output is flushed and deflate returns with Z_STREAM_END if there
-  was enough output space; if deflate returns with Z_OK, this function must be
-  called again with Z_FINISH and more output space (updated avail_out) but no
-  more input data, until it returns with Z_STREAM_END or an error. After
-  deflate has returned Z_STREAM_END, the only possible operations on the
-  stream are deflateReset or deflateEnd.
-  
-    Z_FINISH can be used immediately after deflateInit if all the compression
-  is to be done in a single step. In this case, avail_out must be at least
-  0.1% larger than avail_in plus 12 bytes.  If deflate does not return
-  Z_STREAM_END, then it must be called again as described above.
-
-    deflate() may update data_type if it can make a good guess about
-  the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
-  binary. This field is only for information purposes and does not affect
-  the compression algorithm in any manner.
-
-    deflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if all input has been
-  consumed and all output has been produced (only when flush is set to
-  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
-  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible.
-*/
-
-
-extern int deflateEnd OF((z_stream *strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-
-     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
-   stream state was inconsistent. In the error case, msg may be set
-   but then points to a static string (which must not be deallocated).
-*/
-
-
-extern int inflateInit OF((z_stream *strm));
-/* 
-     Initializes the internal stream state for decompression. The fields
-   zalloc and zfree must be initialized before by the caller.  If zalloc and
-   zfree are set to Z_NULL, inflateInit updates them to use default allocation
-   functions.
-
-     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory.  msg is set to null if there is no error message.
-   inflateInit does not perform any decompression: this will be done by
-   inflate().
-*/
-
-
-extern int inflate OF((z_stream *strm, int flush));
-/*
-  Performs one or both of the following actions:
-
-  - Decompress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in is updated and processing
-    will resume at this point for the next call of inflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly.  inflate() always provides as much output as possible
-    (until there is no more input data or no more space in the output buffer).
-
-  Before the call of inflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating the next_* and avail_* values accordingly.
-  The application can consume the uncompressed output when it wants, for
-  example when the output buffer is full (avail_out == 0), or after each
-  call of inflate().
-
-    If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH,
-  inflate flushes as much output as possible to the output buffer. The
-  flushing behavior of inflate is not specified for values of the flush
-  parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the
-  current implementation actually flushes as much output as possible
-  anyway.  For Z_PACKET_FLUSH, inflate checks that once all the input data
-  has been consumed, it is expecting to see the length field of a stored
-  block; if not, it returns Z_DATA_ERROR.
-
-    inflate() should normally be called until it returns Z_STREAM_END or an
-  error. However if all decompression is to be performed in a single step
-  (a single call of inflate), the parameter flush should be set to
-  Z_FINISH. In this case all pending input is processed and all pending
-  output is flushed; avail_out must be large enough to hold all the
-  uncompressed data. (The size of the uncompressed data may have been saved
-  by the compressor for this purpose.) The next operation on this stream must
-  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
-  is never required, but can be used to inform inflate that a faster routine
-  may be used for the single inflate() call.
-
-    inflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if the end of the
-  compressed data has been reached and all uncompressed output has been
-  produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if
-  the stream structure was inconsistent (for example if next_in or next_out
-  was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no
-  progress is possible or if there was not enough room in the output buffer
-  when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then
-  call inflateSync to look for a good compression block.  */
-
-
-extern int inflateEnd OF((z_stream *strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-
-     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
-   was inconsistent. In the error case, msg may be set but then points to a
-   static string (which must not be deallocated).
-*/
-
-                        /* advanced functions */
-
-/*
-    The following functions are needed only in some special applications.
-*/
-
-extern int deflateInit2 OF((z_stream *strm,
-                            int  level,
-                            int  method,
-                            int  windowBits,
-                            int  memLevel,
-                            int  strategy));
-/*   
-     This is another version of deflateInit with more compression options. The
-   fields next_in, zalloc and zfree must be initialized before by the caller.
-
-     The method parameter is the compression method. It must be 8 in this
-   version of the library. (Method 9 will allow a 64K history buffer and
-   partial block flushes.)
-
-     The windowBits parameter is the base two logarithm of the window size
-   (the size of the history buffer).  It should be in the range 8..15 for this
-   version of the library (the value 16 will be allowed for method 9). Larger
-   values of this parameter result in better compression at the expense of
-   memory usage. The default value is 15 if deflateInit is used instead.
-
-    The memLevel parameter specifies how much memory should be allocated
-   for the internal compression state. memLevel=1 uses minimum memory but
-   is slow and reduces compression ratio; memLevel=9 uses maximum memory
-   for optimal speed. The default value is 8. See zconf.h for total memory
-   usage as a function of windowBits and memLevel.
-
-     The strategy parameter is used to tune the compression algorithm. Use
-   the value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data
-   produced by a filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman
-   encoding only (no string match).  Filtered data consists mostly of small
-   values with a somewhat random distribution. In this case, the
-   compression algorithm is tuned to compress them better. The strategy
-   parameter only affects the compression ratio but not the correctness of
-   the compressed output even if it is not set appropriately.
-
-     The minCompression parameter specifies the minimum reduction in size
-   required for a compressed block to be output when Z_PACKET_FLUSH is
-   used (see the description of deflate above).
-
-     If next_in is not null, the library will use this buffer to hold also
-   some history information; the buffer must either hold the entire input
-   data, or have at least 1<<(windowBits+1) bytes and be writable. If next_in
-   is null, the library will allocate its own history buffer (and leave next_in
-   null). next_out need not be provided here but must be provided by the
-   application for the next call of deflate().
-
-     If the history buffer is provided by the application, next_in must
-   must never be changed by the application since the compressor maintains
-   information inside this buffer from call to call; the application
-   must provide more input only by increasing avail_in. next_in is always
-   reset by the library in this case.
-
-      deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   an invalid method). msg is set to null if there is no error message.
-   deflateInit2 does not perform any compression: this will be done by
-   deflate().
-*/
-                            
-extern int deflateCopy OF((z_stream *dest,
-                           z_stream *source));
-/*
-     Sets the destination stream as a complete copy of the source stream.  If
-   the source stream is using an application-supplied history buffer, a new
-   buffer is allocated for the destination stream.  The compressed output
-   buffer is always application-supplied. It's the responsibility of the
-   application to provide the correct values of next_out and avail_out for the
-   next call of deflate.
-
-     This function is useful when several compression strategies will be
-   tried, for example when there are several ways of pre-processing the input
-   data with a filter. The streams that will be discarded should then be freed
-   by calling deflateEnd.  Note that deflateCopy duplicates the internal
-   compression state which can be quite large, so this strategy is slow and
-   can consume lots of memory.
-
-      deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
-   (such as zalloc being NULL). msg is left unchanged in both source and
-   destination.
-*/
-
-extern int deflateReset OF((z_stream *strm));
-/*
-     This function is equivalent to deflateEnd followed by deflateInit,
-   but does not free and reallocate all the internal compression state.
-   The stream will keep the same compression level and any other attributes
-   that may have been set by deflateInit2.
-
-      deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int inflateInit2 OF((z_stream *strm,
-                            int  windowBits));
-/*   
-     This is another version of inflateInit with more compression options. The
-   fields next_out, zalloc and zfree must be initialized before by the caller.
-
-     The windowBits parameter is the base two logarithm of the maximum window
-   size (the size of the history buffer).  It should be in the range 8..15 for
-   this version of the library (the value 16 will be allowed soon). The
-   default value is 15 if inflateInit is used instead. If a compressed stream
-   with a larger window size is given as input, inflate() will return with
-   the error code Z_DATA_ERROR instead of trying to allocate a larger window.
-
-     If next_out is not null, the library will use this buffer for the history
-   buffer; the buffer must either be large enough to hold the entire output
-   data, or have at least 1<<windowBits bytes.  If next_out is null, the
-   library will allocate its own buffer (and leave next_out null). next_in
-   need not be provided here but must be provided by the application for the
-   next call of inflate().
-
-     If the history buffer is provided by the application, next_out must
-   never be changed by the application since the decompressor maintains
-   history information inside this buffer from call to call; the application
-   can only reset next_out to the beginning of the history buffer when
-   avail_out is zero and all output has been consumed.
-
-      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   windowBits < 8). msg is set to null if there is no error message.
-   inflateInit2 does not perform any decompression: this will be done by
-   inflate().
-*/
-
-extern int inflateSync OF((z_stream *strm));
-/* 
-    Skips invalid compressed data until the special marker (see deflate()
-  above) can be found, or until all available input is skipped. No output
-  is provided.
-
-    inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
-  if no more input was provided, Z_DATA_ERROR if no marker has been found,
-  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
-  case, the application may save the current current value of total_in which
-  indicates where valid compressed data was found. In the error case, the
-  application may repeatedly call inflateSync, providing more input each time,
-  until success or end of the input data.
-*/
-
-extern int inflateReset OF((z_stream *strm));
-/*
-     This function is equivalent to inflateEnd followed by inflateInit,
-   but does not free and reallocate all the internal decompression state.
-   The stream will keep attributes that may have been set by inflateInit2.
-
-      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int inflateIncomp OF((z_stream *strm));
-/*
-     This function adds the data at next_in (avail_in bytes) to the output
-   history without performing any output.  There must be no pending output,
-   and the decompressor must be expecting to see the start of a block.
-   Calling this function is equivalent to decompressing a stored block
-   containing the data at next_in (except that the data is not output).
-*/
-
-                        /* checksum functions */
-
-/*
-     This function is not related to compression but is exported
-   anyway because it might be useful in applications using the
-   compression library.
-*/
-
-extern uLong adler32 OF((uLong adler, Bytef *buf, uInt len));
-
-/*
-     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
-   return the updated checksum. If buf is NULL, this function returns
-   the required initial value for the checksum.
-   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
-   much faster. Usage example:
-
-     uLong adler = adler32(0L, Z_NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       adler = adler32(adler, buffer, length);
-     }
-     if (adler != original_adler) error();
-*/
-
-#ifndef _Z_UTIL_H
-    struct internal_state {int dummy;}; /* hack for buggy compilers */
-#endif
-
-#endif /* _ZLIB_H */

loadparm.c

@@ -47,7 +47,6 @@
 #define BOOL int
 #define False 0
 #define True 1
-#define Realloc realloc
 #define PTR_DIFF(p1,p2) ((ptrdiff_t)(((char *)(p1)) - (char *)(p2)))
 #define strequal(a,b) (strcasecmp(a,b)==0)
 #define BOOLSTR(b) ((b) ? "Yes" : "No")
@@ -99,8 +98,11 @@ typedef struct
 {
 	char *motd_file;
 	char *lock_file;
+	char *log_file;
+	char *pid_file;
 	int syslog_facility;
 	int max_connections;
+	char *socket_options;
 } global;
 
 static global Globals;
@@ -117,6 +119,8 @@ typedef struct
 	char *comment;
 	BOOL read_only;
 	BOOL list;
+	BOOL use_chroot;
+	BOOL transfer_logging;
 	char *uid;
 	char *gid;
 	char *hosts_allow;
@@ -125,6 +129,7 @@ typedef struct
 	char *secrets_file;
 	char *exclude;
 	char *exclude_from;
+	char *log_format;
 } service;
 
 
@@ -136,6 +141,8 @@ static service sDefault =
 	NULL,    /* comment */
 	True,    /* read only */
 	True,    /* list */
+	True,    /* use chroot */
+	False,   /* transfer logging */
 	"nobody",/* uid */
 	"nobody",/* gid */
 	NULL,    /* hosts allow */
@@ -144,6 +151,7 @@ static service sDefault =
 	NULL,    /* secrets file */
 	NULL,    /* exclude */
 	NULL,    /* exclude from */
+	"%o %h [%a] %m (%u) %f %l",    /* log format */
 };
 
 
@@ -230,12 +238,16 @@ static struct parm_struct parm_table[] =
   {"motd file",        P_STRING,  P_GLOBAL, &Globals.motd_file,    NULL,   0},
   {"lock file",        P_STRING,  P_GLOBAL, &Globals.lock_file,    NULL,   0},
   {"syslog facility",  P_ENUM,    P_GLOBAL, &Globals.syslog_facility, enum_facilities,0},
+  {"socket options",   P_STRING,  P_GLOBAL, &Globals.socket_options,NULL,  0},
+  {"log file",         P_STRING,  P_GLOBAL, &Globals.log_file,      NULL,  0},
+  {"pid file",         P_STRING,  P_GLOBAL, &Globals.pid_file,      NULL,  0},
 
   {"name",             P_STRING,  P_LOCAL,  &sDefault.name,        NULL,   0},
   {"comment",          P_STRING,  P_LOCAL,  &sDefault.comment,     NULL,   0},
   {"path",             P_STRING,  P_LOCAL,  &sDefault.path,        NULL,   0},
   {"read only",        P_BOOL,    P_LOCAL,  &sDefault.read_only,   NULL,   0},
   {"list",             P_BOOL,    P_LOCAL,  &sDefault.list,        NULL,   0},
+  {"use chroot",       P_BOOL,    P_LOCAL,  &sDefault.use_chroot,  NULL,   0},
   {"uid",              P_STRING,  P_LOCAL,  &sDefault.uid,         NULL,   0},
   {"gid",              P_STRING,  P_LOCAL,  &sDefault.gid,         NULL,   0},
   {"hosts allow",      P_STRING,  P_LOCAL,  &sDefault.hosts_allow, NULL,   0},
@@ -244,6 +256,8 @@ static struct parm_struct parm_table[] =
   {"secrets file",     P_STRING,  P_LOCAL,  &sDefault.secrets_file,NULL,   0},
   {"exclude",          P_STRING,  P_LOCAL,  &sDefault.exclude,     NULL,   0},
   {"exclude from",     P_STRING,  P_LOCAL,  &sDefault.exclude_from,NULL,   0},
+  {"transfer logging", P_BOOL,    P_LOCAL,  &sDefault.transfer_logging,NULL,0},
+  {"log format",       P_STRING,  P_LOCAL,  &sDefault.log_format,  NULL,   0},
   {NULL,               P_BOOL,    P_NONE,   NULL,                  NULL,   0}
 };
 
@@ -294,13 +308,19 @@ static void init_locals(void)
 
 FN_GLOBAL_STRING(lp_motd_file, &Globals.motd_file)
 FN_GLOBAL_STRING(lp_lock_file, &Globals.lock_file)
+FN_GLOBAL_STRING(lp_log_file, &Globals.log_file)
+FN_GLOBAL_STRING(lp_pid_file, &Globals.pid_file)
+FN_GLOBAL_STRING(lp_socket_options, &Globals.socket_options)
 FN_GLOBAL_INTEGER(lp_max_connections, &Globals.max_connections)
 FN_GLOBAL_INTEGER(lp_syslog_facility, &Globals.syslog_facility)
+
 FN_LOCAL_STRING(lp_name, name)
 FN_LOCAL_STRING(lp_comment, comment)
 FN_LOCAL_STRING(lp_path, path)
 FN_LOCAL_BOOL(lp_read_only, read_only)
 FN_LOCAL_BOOL(lp_list, list)
+FN_LOCAL_BOOL(lp_use_chroot, use_chroot)
+FN_LOCAL_BOOL(lp_transfer_logging, transfer_logging)
 FN_LOCAL_STRING(lp_uid, uid)
 FN_LOCAL_STRING(lp_gid, gid)
 FN_LOCAL_STRING(lp_hosts_allow, hosts_allow)
@@ -309,6 +329,7 @@ FN_LOCAL_STRING(lp_auth_users, auth_users)
 FN_LOCAL_STRING(lp_secrets_file, secrets_file)
 FN_LOCAL_STRING(lp_exclude, exclude)
 FN_LOCAL_STRING(lp_exclude_from, exclude_from)
+FN_LOCAL_STRING(lp_log_format, log_format)
 
 /* local prototypes */
 static int    strwicmp( char *psz1, char *psz2 );
@@ -326,7 +347,7 @@ initialise a service to the defaults
 ***************************************************************************/
 static void init_service(service *pservice)
 {
-	bzero((char *)pservice,sizeof(service));
+	memset((char *)pservice,0,sizeof(service));
 	copy_service(pservice,&sDefault);
 }
 
@@ -337,7 +358,7 @@ static void string_set(char **s, char *v)
 		return;
 	}
 	*s = strdup(v);
-	if (!*s) exit_cleanup(1);
+	if (!*s) exit_cleanup(RERR_MALLOC);
 }
 
 
@@ -364,6 +385,7 @@ static int add_a_service(service *pservice, char *name)
   i = iNumServices;
 
   ServicePtrs = (service **)Realloc(ServicePtrs,sizeof(service *)*num_to_alloc);
+
   if (ServicePtrs)
 	  pSERVICE(iNumServices) = (service *)malloc(sizeof(service));
 

log.c

@@ -23,15 +23,46 @@
   */
 #include "rsync.h"
 
+static FILE *logfile;
+
+
+static void logit(int priority, char *buf)
+{
+	if (logfile) {
+		fprintf(logfile,"%s [%d] %s", 
+			timestring(time(NULL)), (int)getpid(), buf);
+		fflush(logfile);
+	} else {
+		syslog(priority, "%s", buf);
+	}
+}
 
 void log_open(void)
 {
 	static int initialised;
 	int options = LOG_PID;
+	time_t t;
+	char *logf;
 
 	if (initialised) return;
 	initialised = 1;
 
+	/* this looks pointless, but it is needed in order for the
+	   C library on some systems to fetch the timezone info
+	   before the chroot */
+	t = time(NULL);
+	localtime(&t);
+
+	/* optionally use a log file instead of syslog */
+	logf = lp_log_file();
+	if (logf && *logf) {
+		extern int orig_umask;
+		int old_umask = umask(022 | orig_umask);
+		logfile = fopen(logf, "a");
+		umask(old_umask);
+		return;
+	}
+
 #ifdef LOG_NDELAY
 	options |= LOG_NDELAY;
 #endif
@@ -43,36 +74,51 @@ void log_open(void)
 #endif
 
 #ifndef LOG_NDELAY
-	syslog(LOG_INFO,"rsyncd started\n");
+	logit(LOG_INFO,"rsyncd started\n");
 #endif
 }
 		
 
-/* this is the rsync debugging function. Call it with FINFO or FERROR */
-void rprintf(int fd, const char *format, ...)
+/* this is the rsync debugging function. Call it with FINFO, FERROR or FLOG */
+ void rprintf(int fd, const char *format, ...)
 {
 	va_list ap;  
 	char buf[1024];
 	int len;
 	FILE *f=NULL;
 	extern int am_daemon;
+	/* recursion can happen with certain fatal conditions */
 
 	va_start(ap, format);
 	len = vslprintf(buf, sizeof(buf)-1, format, ap);
 	va_end(ap);
 
-	if (len < 0) exit_cleanup(1);
+	if (len < 0) exit_cleanup(RERR_MESSAGEIO);
 
-	if (len > sizeof(buf)-1) exit_cleanup(1);
+	if (len > sizeof(buf)-1) exit_cleanup(RERR_MESSAGEIO);
 
 	buf[len] = 0;
 
+	if (fd == FLOG) {
+		if (am_daemon) logit(LOG_INFO, buf);
+		return;
+	}
+
 	if (am_daemon) {
+		static int depth;
 		int priority = LOG_INFO;
 		if (fd == FERROR) priority = LOG_WARNING;
 
+		if (depth) return;
+
+		depth++;
+
 		log_open();
-		syslog(priority, "%s", buf);
+		if (!io_multiplex_write(fd, buf, strlen(buf))) {
+			logit(priority, buf);
+		}
+
+		depth--;
 		return;
 	}
 
@@ -88,9 +134,11 @@ void rprintf(int fd, const char *format, ...)
 			f = stdout;
 	} 
 
-	if (!f) exit_cleanup(1);
+	if (!f) exit_cleanup(RERR_MESSAGEIO);
 
-	if (fwrite(buf, len, 1, f) != 1) exit_cleanup(1);
+	if (fwrite(buf, len, 1, f) != 1) exit_cleanup(RERR_MESSAGEIO);
+
+	if (buf[len-1] == '\r' || buf[len-1] == '\n') fflush(f);
 }
 
 void rflush(int fd)
@@ -102,6 +150,10 @@ void rflush(int fd)
 		return;
 	}
 
+	if (fd == FLOG) {
+		return;
+	} 
+
 	if (fd == FERROR) {
 		f = stderr;
 	} 
@@ -114,7 +166,159 @@ void rflush(int fd)
 			f = stdout;
 	} 
 
-	if (!f) exit_cleanup(1);
+	if (!f) exit_cleanup(RERR_MESSAGEIO);
 	fflush(f);
 }
 
+
+
+/* a generic logging routine for send/recv, with parameter
+   substitiution */
+static void log_formatted(int fd,
+			  char *format, char *op, struct file_struct *file,
+			  struct stats *initial_stats)
+{
+	extern int module_id;
+	extern char *auth_user;
+	char buf[1024];
+	char buf2[1024];
+	char *p, *s, *n;
+	int l;
+	extern struct stats stats;		
+	extern int am_sender;
+	int64 b;
+
+	strlcpy(buf, format, sizeof(buf)-1);
+	
+	for (s=&buf[0]; 
+	     s && (p=strchr(s,'%')); ) {
+		n = NULL;
+		s = p + 1;
+
+		switch (p[1]) {
+		case 'h': n = client_name(0); break;
+		case 'a': n = client_addr(0); break;
+		case 'l': 
+			slprintf(buf2,sizeof(buf2)-1,"%.0f", 
+				 (double)file->length); 
+			n = buf2;
+			break;
+		case 'p': 
+			slprintf(buf2,sizeof(buf2)-1,"%d", 
+				 (int)getpid()); 
+			n = buf2;
+			break;
+		case 'o': n = op; break;
+		case 'f': 
+			slprintf(buf2, sizeof(buf2)-1, "%s/%s", 
+				 file->basedir?file->basedir:"", 
+				 f_name(file));
+			clean_fname(buf2);
+			n = buf2; 
+			if (*n == '/') n++;
+			break;
+		case 'm': n = lp_name(module_id); break;
+		case 't': n = timestring(time(NULL)); break;
+		case 'P': n = lp_path(module_id); break;
+		case 'u': n = auth_user; break;
+		case 'b': 
+			if (am_sender) {
+				b = stats.total_written - 
+					initial_stats->total_written;
+			} else {
+				b = stats.total_read - 
+					initial_stats->total_read;
+			}
+			slprintf(buf2,sizeof(buf2)-1,"%.0f", (double)b); 
+			n = buf2;
+			break;
+		case 'c': 
+			if (!am_sender) {
+				b = stats.total_written - 
+					initial_stats->total_written;
+			} else {
+				b = stats.total_read - 
+					initial_stats->total_read;
+			}
+			slprintf(buf2,sizeof(buf2)-1,"%.0f", (double)b); 
+			n = buf2;
+			break;
+		}
+
+		if (!n) continue;
+
+		l = strlen(n);
+
+		if ((l-1) + ((int)(s - &buf[0])) > sizeof(buf)) {
+			rprintf(FERROR,"buffer overflow expanding %%%c - exiting\n",
+				p[0]);
+			exit_cleanup(RERR_MESSAGEIO);
+		}
+
+		if (l != 2) {
+			memmove(s+(l-1), s+1, strlen(s+1)+1);
+		}
+		memcpy(p, n, l);
+
+		s = p+l;
+	}
+
+	rprintf(fd,"%s\n", buf);
+}
+
+/* log the outgoing transfer of a file */
+void log_send(struct file_struct *file, struct stats *initial_stats)
+{
+	extern int module_id;
+	extern int am_server;
+	extern char *log_format;
+
+	if (lp_transfer_logging(module_id)) {
+		log_formatted(FLOG, lp_log_format(module_id), "send", file, initial_stats);
+	} else if (log_format && !am_server) {
+		log_formatted(FINFO, log_format, "send", file, initial_stats);
+	}
+}
+
+/* log the incoming transfer of a file */
+void log_recv(struct file_struct *file, struct stats *initial_stats)
+{
+	extern int module_id;
+	extern int am_server;
+	extern char *log_format;
+
+	if (lp_transfer_logging(module_id)) {
+		log_formatted(FLOG, lp_log_format(module_id), "send", file, initial_stats);
+	} else if (log_format && !am_server) {
+		log_formatted(FINFO, log_format, "send", file, initial_stats);
+	}
+}
+
+/* called when the transfer is interrupted for some reason */
+void log_exit(int code)
+{
+	if (code == 0) {
+		extern struct stats stats;		
+		rprintf(FLOG,"wrote %.0f bytes  read %.0f bytes  total size %.0f\n",
+			(double)stats.total_written,
+			(double)stats.total_read,
+			(double)stats.total_size);
+	} else {
+		rprintf(FLOG,"transfer interrupted (code %d)\n", code);
+	}
+}
+
+/* log the incoming transfer of a file for interactive use, this
+   will be called at the end where the client was run 
+   
+   it i called when a file starts to be transferred
+*/
+void log_transfer(struct file_struct *file, char *fname)
+{
+	extern int verbose;
+
+	if (!verbose) return;
+
+	rprintf(FINFO,"%s\n", fname);
+}
+

main.c

@@ -20,7 +20,8 @@
 #include "rsync.h"
 
 time_t starttime = 0;
-int64 total_size = 0;
+
+struct stats stats;
 
 extern int csum_length;
 
@@ -28,42 +29,65 @@ extern int verbose;
 
 static void report(int f)
 {
-	int64 in,out,tsize;
 	time_t t = time(NULL);
 	extern int am_server;
 	extern int am_sender;
 	extern int am_daemon;
+	extern int do_stats;
+
+	if (am_daemon) {
+		log_exit(0);
+		if (f == -1 || !am_sender) return;
+	}
 
 	if (!verbose) return;
 
-	if (am_daemon) {
-		rprintf(FINFO, "wrote %.0f bytes  read %.0f bytes  total size %.0f\n",
-			(double)write_total(),(double)read_total(),
-			(double)total_size);
-	}
+	if (am_server && !am_sender) return;
 
 	if (am_server && am_sender) {
-		write_longint(f,read_total());
-		write_longint(f,write_total());
-		write_longint(f,total_size);
-		write_flush(f);
+		write_longint(f,stats.total_read);
+		write_longint(f,stats.total_written);
+		write_longint(f,stats.total_size);
 		return;
 	}
     
-	if (am_sender) {
-		in = read_total();
-		out = write_total();
-		tsize = total_size;
-	} else {
-		out = read_longint(f);
-		in = read_longint(f);
-		tsize = read_longint(f);
+	if (!am_sender) {
+		int64 r;
+		stats.total_written = read_longint(f);
+		r = read_longint(f);
+		stats.total_size = read_longint(f);
+		stats.total_read = r;
+	}
+
+	if (do_stats) {
+		rprintf(FINFO,"\nNumber of files: %d\n", stats.num_files);
+		rprintf(FINFO,"Number of files transferred: %d\n", 
+		       stats.num_transferred_files);
+		rprintf(FINFO,"Total file size: %.0f bytes\n", 
+		       (double)stats.total_size);
+		rprintf(FINFO,"Total transferred file size: %.0f bytes\n", 
+		       (double)stats.total_transferred_size);
+		rprintf(FINFO,"Literal data: %.0f bytes\n", 
+		       (double)stats.literal_data);
+		rprintf(FINFO,"Matched data: %.0f bytes\n", 
+		       (double)stats.matched_data);
+		rprintf(FINFO,"File list size: %d\n", stats.flist_size);
+		rprintf(FINFO,"Total bytes written: %.0f\n", 
+		       (double)stats.total_written);
+		rprintf(FINFO,"Total bytes read: %.0f\n\n", 
+		       (double)stats.total_read);
 	}
 	
-	printf("wrote %.0f bytes  read %.0f bytes  %.2f bytes/sec\n",
-	       (double)out,(double)in,(in+out)/(0.5 + (t-starttime)));
-	printf("total size is %.0f  speedup is %.2f\n",
-	       (double)tsize,(1.0*tsize)/(in+out));
+	rprintf(FINFO,"wrote %.0f bytes  read %.0f bytes  %.2f bytes/sec\n",
+	       (double)stats.total_written,
+	       (double)stats.total_read,
+	       (stats.total_written+stats.total_read)/(0.5 + (t-starttime)));
+	rprintf(FINFO,"total size is %.0f  speedup is %.2f\n",
+	       (double)stats.total_size,
+	       (1.0*stats.total_size)/(stats.total_written+stats.total_read));
+
+	fflush(stdout);
+	fflush(stderr);
 }
 
 
@@ -145,40 +169,47 @@ static char *get_local_name(struct file_list *flist,char *name)
 	STRUCT_STAT st;
 	extern int orig_umask;
 
-  if (do_stat(name,&st) == 0) {
-    if (S_ISDIR(st.st_mode)) {
-      if (chdir(name) != 0) {
-	rprintf(FERROR,"chdir %s : %s (1)\n",name,strerror(errno));
-	exit_cleanup(1);
-      }
-      return NULL;
-    }
-    if (flist->count > 1) {
-      rprintf(FERROR,"ERROR: destination must be a directory when copying more than 1 file\n");
-      exit_cleanup(1);
-    }
-    return name;
-  }
+	if (verbose > 2)
+		rprintf(FINFO,"get_local_name count=%d %s\n", 
+			flist->count, name);
 
-  if (flist->count == 1)
-    return name;
+	if (do_stat(name,&st) == 0) {
+		if (S_ISDIR(st.st_mode)) {
+			if (!push_dir(name, 0)) {
+				rprintf(FERROR,"push_dir %s : %s (1)\n",
+					name,strerror(errno));
+				exit_cleanup(RERR_FILESELECT);
+			}
+			return NULL;
+		}
+		if (flist->count > 1) {
+			rprintf(FERROR,"ERROR: destination must be a directory when copying more than 1 file\n");
+			exit_cleanup(RERR_FILESELECT);
+		}
+		return name;
+	}
 
-  if (!name) 
-    return NULL;
+	if (flist->count == 1)
+		return name;
 
-  if (do_mkdir(name,0777 & ~orig_umask) != 0) {
-    rprintf(FERROR,"mkdir %s : %s (1)\n",name,strerror(errno));
-    exit_cleanup(1);
-  } else {
-    rprintf(FINFO,"created directory %s\n",name);
-  }
+	if (!name) 
+		return NULL;
 
-  if (chdir(name) != 0) {
-    rprintf(FERROR,"chdir %s : %s (2)\n",name,strerror(errno));
-    exit_cleanup(1);
-  }
+	if (do_mkdir(name,0777 & ~orig_umask) != 0) {
+		rprintf(FERROR,"mkdir %s : %s (1)\n",name,strerror(errno));
+		exit_cleanup(RERR_FILEIO);
+	} else {
+		if (verbose > 0)
+			rprintf(FINFO,"created directory %s\n",name);
+	}
 
-  return NULL;
+	if (!push_dir(name, 0)) {
+		rprintf(FERROR,"push_dir %s : %s (2)\n",
+			name,strerror(errno));
+		exit_cleanup(RERR_FILESELECT);
+	}
+
+	return NULL;
 }
 
 
@@ -195,9 +226,9 @@ static void do_server_sender(int f_in, int f_out, int argc,char *argv[])
 	if (verbose > 2)
 		rprintf(FINFO,"server_sender starting pid=%d\n",(int)getpid());
   
-	if (!relative_paths && chdir(dir) != 0) {
-		rprintf(FERROR,"chdir %s: %s (3)\n",dir,strerror(errno));
-		exit_cleanup(1);
+	if (!relative_paths && !push_dir(dir, 0)) {
+		rprintf(FERROR,"push_dir %s: %s (3)\n",dir,strerror(errno));
+		exit_cleanup(RERR_FILESELECT);
 	}
 	argc--;
 	argv++;
@@ -216,41 +247,67 @@ static void do_server_sender(int f_in, int f_out, int argc,char *argv[])
 		argv[0] = ".";
 	}
 	
+	set_nonblocking(f_out);
+	if (f_in != f_out)
+		set_nonblocking(f_in);
+		
 	flist = send_file_list(f_out,argc,argv);
+	if (!flist || flist->count == 0) {
+		exit_cleanup(0);
+	}
+
 	send_files(flist,f_out,f_in);
 	report(f_out);
+	io_flush();
 	exit_cleanup(0);
 }
 
 
 static int do_recv(int f_in,int f_out,struct file_list *flist,char *local_name)
 {
-  int pid;
-  int status=0;
-  int recv_pipe[2];
-  extern int preserve_hard_links;
+	int pid;
+	int status=0;
+	int recv_pipe[2];
+	extern int preserve_hard_links;
 
-  if (preserve_hard_links)
-    init_hard_links(flist);
+	if (preserve_hard_links)
+		init_hard_links(flist);
 
-  if (pipe(recv_pipe) < 0) {
-    rprintf(FERROR,"pipe failed in do_recv\n");
-    exit(1);
-  }
+	if (pipe(recv_pipe) < 0) {
+		rprintf(FERROR,"pipe failed in do_recv\n");
+		exit_cleanup(RERR_SOCKETIO);
+	}
   
+	io_flush();
 
-  if ((pid=do_fork()) == 0) {
-    recv_files(f_in,flist,local_name,recv_pipe[1]);
-    if (verbose > 2)
-      rprintf(FINFO,"receiver read %ld\n",(long)read_total());
-    exit_cleanup(0);
-  }
+	if ((pid=do_fork()) == 0) {
+		close(recv_pipe[0]);
+		if (f_in != f_out) close(f_out);
 
-  generate_files(f_out,flist,local_name,recv_pipe[0]);
+		set_nonblocking(f_in);
+		set_nonblocking(recv_pipe[1]);
 
-  waitpid(pid, &status, 0);
+		recv_files(f_in,flist,local_name,recv_pipe[1]);
+		report(f_in);
 
-  return status;
+		io_flush();
+		_exit(0);
+	}
+
+	close(recv_pipe[1]);
+	io_close_input(f_in);
+	if (f_in != f_out) close(f_in);
+
+	set_nonblocking(f_out);
+	set_nonblocking(recv_pipe[0]);
+
+	io_start_buffering(f_out);
+
+	generate_files(f_out,flist,local_name,recv_pipe[0]);
+
+	io_flush();
+	waitpid(pid, &status, 0);
+	return status;
 }
 
 
@@ -270,10 +327,10 @@ static void do_server_recv(int f_in, int f_out, int argc,char *argv[])
 		dir = argv[0];
 		argc--;
 		argv++;
-		if (!am_daemon && chdir(dir) != 0) {
-			rprintf(FERROR,"chdir %s : %s (4)\n",
+		if (!am_daemon && !push_dir(dir, 0)) {
+			rprintf(FERROR,"push_dir %s : %s (4)\n",
 				dir,strerror(errno));
-			exit_cleanup(1);
+			exit_cleanup(RERR_FILESELECT);
 		}    
 	}
 
@@ -282,8 +339,8 @@ static void do_server_recv(int f_in, int f_out, int argc,char *argv[])
 
 	flist = recv_file_list(f_in);
 	if (!flist || flist->count == 0) {
-		rprintf(FERROR,"nothing to do\n");
-		exit_cleanup(1);
+		rprintf(FERROR,"server_recv: nothing to do\n");
+		exit_cleanup(RERR_FILESELECT);
 	}
 	
 	if (argc > 0) {    
@@ -304,8 +361,12 @@ void start_server(int f_in, int f_out, int argc, char *argv[])
 	extern int cvs_exclude;
 	extern int am_sender;
 
+	set_nonblocking(f_out);
+	if (f_in != f_out)
+		set_nonblocking(f_in);
+			
 	setup_protocol(f_out, f_in);
-	
+
 	if (am_sender) {
 		recv_exclude_list(f_in);
 		if (cvs_exclude)
@@ -323,6 +384,7 @@ int client_run(int f_in, int f_out, int pid, int argc, char *argv[])
 	int status = 0, status2 = 0;
 	char *local_name = NULL;
 	extern int am_sender;
+	extern int list_only;
 
 	setup_protocol(f_out,f_in);
 	
@@ -336,21 +398,29 @@ int client_run(int f_in, int f_out, int pid, int argc, char *argv[])
 		flist = send_file_list(f_out,argc,argv);
 		if (verbose > 3) 
 			rprintf(FINFO,"file list sent\n");
+
+		set_nonblocking(f_out);
+		if (f_in != f_out)
+			set_nonblocking(f_in);
+
 		send_files(flist,f_out,f_in);
 		if (pid != -1) {
 			if (verbose > 3)
-				rprintf(FINFO,"waiting on %d\n",pid);
+				rprintf(FINFO,"client_run waiting on %d\n",pid);
+			io_flush();
 			waitpid(pid, &status, 0);
 		}
 		report(-1);
 		exit_cleanup(status);
 	}
+
+	if (argc == 0) list_only = 1;
 	
 	send_exclude_list(f_out);
 	
 	flist = recv_file_list(f_in);
 	if (!flist || flist->count == 0) {
-		rprintf(FINFO,"nothing to do\n");
+		rprintf(FINFO,"client: nothing to do\n");
 		exit_cleanup(0);
 	}
 	
@@ -358,29 +428,64 @@ int client_run(int f_in, int f_out, int pid, int argc, char *argv[])
 	
 	status2 = do_recv(f_in,f_out,flist,local_name);
 	
-	report(f_in);
-	
 	if (pid != -1) {
+		if (verbose > 3)
+			rprintf(FINFO,"client_run2 waiting on %d\n",pid);
+		io_flush();
 		waitpid(pid, &status, 0);
 	}
 	
 	return status | status2;
 }
 
+static char *find_colon(char *s)
+{
+	char *p, *p2;
 
-int start_client(int argc, char *argv[])
+	p = strchr(s,':');
+	if (!p) return NULL;
+	
+	/* now check to see if there is a / in the string before the : - if there is then
+	   discard the colon on the assumption that the : is part of a filename */
+	p2 = strchr(s,'/');
+	if (p2 && p2 < p) return NULL;
+
+	return p;
+}
+
+static int start_client(int argc, char *argv[])
 {
 	char *p;
 	char *shell_machine = NULL;
 	char *shell_path = NULL;
 	char *shell_user = NULL;
-	int pid;
+	int pid, ret;
 	int f_in,f_out;
 	extern int local_server;
 	extern int am_sender;
 	extern char *shell_cmd;
+	extern int rsync_port;
 
-	p = strchr(argv[0],':');
+	if (strncasecmp(URL_PREFIX, argv[0], strlen(URL_PREFIX)) == 0) {
+		char *host, *path;
+
+		host = argv[0] + strlen(URL_PREFIX);
+		p = strchr(host,'/');
+		if (p) {
+			*p = 0;
+			path = p+1;
+		} else {
+			path="";
+		}
+		p = strchr(host,':');
+		if (p) {
+			rsync_port = atoi(p+1);
+			*p = 0;
+		}
+		return start_socket_client(host, path, argc-1, argv+1);
+	}
+
+	p = find_colon(argv[0]);
 
 	if (p) {
 		if (p[1] == ':') {
@@ -388,9 +493,9 @@ int start_client(int argc, char *argv[])
 			return start_socket_client(argv[0], p+2, argc-1, argv+1);
 		}
 
-		if (argc < 2) {
+		if (argc < 1) {
 			usage(FERROR);
-			exit_cleanup(1);
+			exit_cleanup(RERR_SYNTAX);
 		}
 
 		am_sender = 0;
@@ -402,7 +507,7 @@ int start_client(int argc, char *argv[])
 	} else {
 		am_sender = 1;
 
-		p = strchr(argv[argc-1],':');
+		p = find_colon(argv[argc-1]);
 		if (!p) {
 			local_server = 1;
 		} else if (p[1] == ':') {
@@ -412,7 +517,7 @@ int start_client(int argc, char *argv[])
 
 		if (argc < 2) {
 			usage(FERROR);
-			exit_cleanup(1);
+			exit_cleanup(RERR_SYNTAX);
 		}
 		
 		if (local_server) {
@@ -443,24 +548,24 @@ int start_client(int argc, char *argv[])
 			shell_path?shell_path:"");
 	}
 	
-	if (!am_sender && argc != 1) {
+	if (!am_sender && argc > 1) {
 		usage(FERROR);
-		exit_cleanup(1);
+		exit_cleanup(RERR_SYNTAX);
 	}
 	
 	pid = do_cmd(shell_cmd,shell_machine,shell_user,shell_path,&f_in,&f_out);
 	
-#if HAVE_SETLINEBUF
-	setlinebuf(stdout);
-	setlinebuf(stderr);
-#endif
+	ret = client_run(f_in, f_out, pid, argc, argv);
 
-	return client_run(f_in, f_out, pid, argc, argv);
+	fflush(stdout);
+	fflush(stderr);
+
+	return ret;
 }
 
 
-RETSIGTYPE sigusr1_handler(int val) {
-	exit_cleanup(1);
+static RETSIGTYPE sigusr1_handler(int val) {
+	exit_cleanup(RERR_SIGNAL);
 }
 
 int main(int argc,char *argv[])
@@ -476,16 +581,20 @@ int main(int argc,char *argv[])
 	starttime = time(NULL);
 	am_root = (getuid() == 0);
 
+	memset(&stats, 0, sizeof(stats));
+
 	if (argc < 2) {
 		usage(FERROR);
-		exit(1);
+		exit_cleanup(RERR_SYNTAX);
 	}
 
 	/* we set a 0 umask so that correct file permissions can be
 	   carried across */
 	orig_umask = (int)umask(0);
 
-	parse_arguments(argc, argv);
+	if (!parse_arguments(argc, argv)) {
+		exit_cleanup(RERR_SYNTAX);
+	}
 
 	argc -= optind;
 	argv += optind;
@@ -495,18 +604,24 @@ int main(int argc,char *argv[])
 	signal(SIGINT,SIGNAL_CAST sig_int);
 	signal(SIGPIPE,SIGNAL_CAST sig_int);
 	signal(SIGHUP,SIGNAL_CAST sig_int);
+	signal(SIGTERM,SIGNAL_CAST sig_int);
 
 	if (am_daemon) {
 		return daemon_main();
 	}
 
+	if (argc < 1) {
+		usage(FERROR);
+		exit_cleanup(RERR_SYNTAX);
+	}
+
 	if (dry_run)
 		verbose = MAX(verbose,1);
 
 #ifndef SUPPORT_LINKS
 	if (!am_server && preserve_links) {
 		rprintf(FERROR,"ERROR: symbolic links not supported\n");
-		exit_cleanup(1);
+		exit_cleanup(RERR_UNSUPPORTED);
 	}
 #endif
 

match.c

@@ -29,18 +29,18 @@ extern int remote_version;
 typedef unsigned short tag;
 
 #define TABLESIZE (1<<16)
-#define NULL_TAG ((tag)-1)
+#define NULL_TAG (-1)
 
 static int false_alarms;
 static int tag_hits;
 static int matches;
-static int data_transfer;
+static int64 data_transfer;
 
 static int total_false_alarms;
 static int total_tag_hits;
 static int total_matches;
-static int64 total_data_transfer;
 
+extern struct stats stats;
 
 struct target {
   tag t;
@@ -49,7 +49,7 @@ struct target {
 
 static struct target *targets;
 
-static tag *tag_table;
+static int *tag_table;
 
 #define gettag2(s1,s2) (((s1) + (s2)) & 0xFFFF)
 #define gettag(sum) gettag2((sum)&0xFFFF,(sum)>>16)
@@ -65,7 +65,7 @@ static void build_hash_table(struct sum_struct *s)
   int i;
 
   if (!tag_table)
-    tag_table = (tag *)malloc(sizeof(tag)*TABLESIZE);
+    tag_table = (int *)malloc(sizeof(tag_table[0])*TABLESIZE);
 
   targets = (struct target *)malloc(sizeof(targets[0])*s->count);
   if (!tag_table || !targets) 
@@ -100,14 +100,13 @@ static void matched(int f,struct sum_struct *s,struct map_struct *buf,
 		rprintf(FINFO,"match at %d last_match=%d j=%d len=%d n=%d\n",
 			(int)offset,(int)last_match,i,(int)s->sums[i].len,(int)n);
 
-	send_token(f,i,buf,last_match,n,i==-1?0:s->sums[i].len);
+	send_token(f,i,buf,last_match,n,i<0?0:s->sums[i].len);
 	data_transfer += n;
 
-	if (n > 0)
-		write_flush(f);
-
-	if (i >= 0)
+	if (i >= 0) {
+		stats.matched_data += s->sums[i].len;
 		n += s->sums[i].len;
+	}
   
 	for (j=0;j<n;j+=CHUNK_SIZE) {
 		int n1 = MIN(CHUNK_SIZE,n-j);
@@ -119,6 +118,11 @@ static void matched(int f,struct sum_struct *s,struct map_struct *buf,
 		last_match = offset + s->sums[i].len;
 	else
 		last_match = offset;
+
+	if (buf)
+		show_progress(last_match, buf->size);
+
+	if (i == -1) end_progress();
 }
 
 
@@ -212,7 +216,17 @@ static void hash_search(int f,struct sum_struct *s,
 		} else {
 			--k;
 		}
-		
+
+		/* By matching early we avoid re-reading the
+		   data 3 times in the case where a token
+		   match comes a long way after last
+		   match. The 3 reads are caused by the
+		   running match, the checksum update and the
+		   literal send. */
+		if (offset-last_match >= CHUNK_SIZE+s->n && 
+		    (end-offset > CHUNK_SIZE)) {
+			matched(f,s,buf,offset - s->n, -2);
+		}
 	} while (++offset < end);
 	
 	matched(f,s,buf,len,-1);
@@ -243,6 +257,12 @@ void match_sums(int f,struct sum_struct *s,struct map_struct *buf,OFF_T len)
 		if (verbose > 2) 
 			rprintf(FINFO,"done hash search\n");
 	} else {
+		OFF_T j;
+		/* by doing this in pieces we avoid too many seeks */
+		for (j=0;j<(len-CHUNK_SIZE);j+=CHUNK_SIZE) {
+			int n1 = MIN(CHUNK_SIZE,(len-CHUNK_SIZE)-j);
+			matched(f,s,buf,j+n1,-2);
+		}
 		matched(f,s,buf,len,-1);
 	}
 
@@ -266,7 +286,7 @@ void match_sums(int f,struct sum_struct *s,struct map_struct *buf,OFF_T len)
 	total_tag_hits += tag_hits;
 	total_false_alarms += false_alarms;
 	total_matches += matches;
-	total_data_transfer += data_transfer;
+	stats.literal_data += data_transfer;
 }
 
 void match_report(void)
@@ -275,7 +295,8 @@ void match_report(void)
 		return;
 
 	rprintf(FINFO,
-		"total: matches=%d  tag_hits=%d  false_alarms=%d  data=%ld\n",
+		"total: matches=%d  tag_hits=%d  false_alarms=%d data=%.0f\n",
 		total_matches,total_tag_hits,
-		total_false_alarms,(long)total_data_transfer);
+		total_false_alarms,
+		(double)stats.literal_data);
 }

md4.c

@@ -102,7 +102,7 @@
  ** Assumes X is an array of 16 ints.
  ** The macro revx reverses the byte-ordering of the next word of X.
  */
- void MDreverse(X)
+static void MDreverse(X)
  unsigned int32 *X;
  { register unsigned int32 t;
    register unsigned int i;
@@ -225,7 +225,7 @@
    /* Process data */
    if (count == 512)
      { /* Full block of data to handle */
-       MDblock(MDp,(unsigned int *)X);
+       MDblock(MDp,(unsigned int32 *)X);
      }
    else if (count > 512) /* Check for count too large */
      { rprintf(FERROR,"\nError: MDupdate called with illegal count value %d."

options.c

@@ -54,74 +54,102 @@ int am_server = 0;
 int am_sender=0;
 int recurse = 0;
 int am_daemon=0;
+int am_client=0;
+int do_stats=0;
+int do_progress=0;
+int keep_partial=0;
+int safe_symlinks=0;
 
 int block_size=BLOCK_SIZE;
 
 char *backup_suffix = BACKUP_SUFFIX;
 char *tmpdir = NULL;
+char *compare_dest = NULL;
 char *config_file = RSYNCD_CONF;
 char *shell_cmd = NULL;
+char *log_format = NULL;
 
 char *rsync_path = RSYNC_NAME;
 int rsync_port = RSYNC_PORT;
 
 int verbose = 0;
 int always_checksum = 0;
-
+int list_only = 0;
 
 void usage(int F)
 {
   rprintf(F,"rsync version %s Copyright Andrew Tridgell and Paul Mackerras\n\n",
 	  VERSION);
-  rprintf(F,"Usage:\t%s [options] src user@host:dest\nOR",RSYNC_NAME);
-  rprintf(F,"\t%s [options] user@host:src dest\n\n",RSYNC_NAME);
-  rprintf(F,"Options:\n");
-  rprintf(F,"-v, --verbose            increase verbosity\n");
-  rprintf(F,"-c, --checksum           always checksum\n");
-  rprintf(F,"-a, --archive            archive mode (same as -rlptDog)\n");
-  rprintf(F,"-r, --recursive          recurse into directories\n");
-  rprintf(F,"-R, --relative           use relative path names\n");
-  rprintf(F,"-b, --backup             make backups (default ~ extension)\n");
-  rprintf(F,"-u, --update             update only (don't overwrite newer files)\n");
-  rprintf(F,"-l, --links              preserve soft links\n");
-  rprintf(F,"-L, --copy-links         treat soft links like regular files\n");
-  rprintf(F,"-H, --hard-links         preserve hard links\n");
-  rprintf(F,"-p, --perms              preserve permissions\n");
-  rprintf(F,"-o, --owner              preserve owner (root only)\n");
-  rprintf(F,"-g, --group              preserve group\n");
-  rprintf(F,"-D, --devices            preserve devices (root only)\n");
-  rprintf(F,"-t, --times              preserve times\n");  
-  rprintf(F,"-S, --sparse             handle sparse files efficiently\n");
-  rprintf(F,"-n, --dry-run            show what would have been transferred\n");
-  rprintf(F,"-W, --whole-file         copy whole files, no incremental checks\n");
-  rprintf(F,"-x, --one-file-system    don't cross filesystem boundaries\n");
-  rprintf(F,"-B, --block-size SIZE    checksum blocking size\n");  
-  rprintf(F,"-e, --rsh COMMAND        specify rsh replacement\n");
-  rprintf(F,"    --rsync-path PATH    specify path to rsync on the remote machine\n");
-  rprintf(F,"-C, --cvs-exclude        auto ignore files in the same way CVS does\n");
-  rprintf(F,"    --delete             delete files that don't exist on the sending side\n");
-  rprintf(F,"    --force              force deletion of directories even if not empty\n");
-  rprintf(F,"    --numeric-ids        don't map uid/gid values by user/group name\n");
-  rprintf(F,"    --timeout TIME       set IO timeout in seconds\n");
-  rprintf(F,"-I, --ignore-times       don't exclude files that match length and time\n");
-  rprintf(F,"-T  --temp-dir DIR       create temporary files in directory DIR\n");
-  rprintf(F,"-z, --compress           compress file data\n");
-  rprintf(F,"    --exclude FILE       exclude file FILE\n");
-  rprintf(F,"    --exclude-from FILE  exclude files listed in FILE\n");
-  rprintf(F,"    --suffix SUFFIX      override backup suffix\n");  
-  rprintf(F,"    --version            print version number\n");  
-  rprintf(F,"    --daemon             run as a rsync daemon\n");  
-  rprintf(F,"    --config FILE        specify alternate rsyncd.conf file\n");  
-  rprintf(F,"    --port PORT          specify alternate rsyncd port number\n");  
+
+  rprintf(F,"rsync is a file transfer program capable of efficient remote update\nvia a fast differencing algorithm.\n\n");
+
+  rprintf(F,"Usage: rsync [OPTION]... SRC [USER@]HOST:DEST\n");
+  rprintf(F,"  or   rsync [OPTION]... [USER@]HOST:SRC DEST\n");
+  rprintf(F,"  or   rsync [OPTION]... SRC DEST\n");
+  rprintf(F,"  or   rsync [OPTION]... [USER@]HOST::SRC DEST\n");
+  rprintf(F,"  or   rsync [OPTION]... SRC [USER@]HOST::DEST\n");
+  rprintf(F,"  or   rsync [OPTION]... rsync://[USER@]HOST[:PORT]/SRC DEST\n");
+  rprintf(F,"\nOptions\n");
+  rprintf(F," -v, --verbose               increase verbosity\n");
+  rprintf(F," -c, --checksum              always checksum\n");
+  rprintf(F," -a, --archive               archive mode\n");
+  rprintf(F," -r, --recursive             recurse into directories\n");
+  rprintf(F," -R, --relative              use relative path names\n");
+  rprintf(F," -b, --backup                make backups (default ~ extension)\n");
+  rprintf(F," -u, --update                update only (don't overwrite newer files)\n");
+  rprintf(F," -l, --links                 preserve soft links\n");
+  rprintf(F," -L, --copy-links            treat soft links like regular files\n");
+  rprintf(F,"     --safe-links            ignore links outside the destination tree\n");
+  rprintf(F," -H, --hard-links            preserve hard links\n");
+  rprintf(F," -p, --perms                 preserve permissions\n");
+  rprintf(F," -o, --owner                 preserve owner (root only)\n");
+  rprintf(F," -g, --group                 preserve group\n");
+  rprintf(F," -D, --devices               preserve devices (root only)\n");
+  rprintf(F," -t, --times                 preserve times\n");  
+  rprintf(F," -S, --sparse                handle sparse files efficiently\n");
+  rprintf(F," -n, --dry-run               show what would have been transferred\n");
+  rprintf(F," -W, --whole-file            copy whole files, no incremental checks\n");
+  rprintf(F," -x, --one-file-system       don't cross filesystem boundaries\n");
+  rprintf(F," -B, --block-size=SIZE       checksum blocking size\n");  
+  rprintf(F," -e, --rsh=COMMAND           specify rsh replacement\n");
+  rprintf(F,"     --rsync-path=PATH       specify path to rsync on the remote machine\n");
+  rprintf(F," -C, --cvs-exclude           auto ignore files in the same way CVS does\n");
+  rprintf(F,"     --delete                delete files that don't exist on the sending side\n");
+  rprintf(F,"     --partial               keep partially transferred files\n");
+  rprintf(F,"     --force                 force deletion of directories even if not empty\n");
+  rprintf(F,"     --numeric-ids           don't map uid/gid values by user/group name\n");
+  rprintf(F,"     --timeout=TIME          set IO timeout in seconds\n");
+  rprintf(F," -I, --ignore-times          don't exclude files that match length and time\n");
+  rprintf(F," -T  --temp-dir=DIR          create temporary files in directory DIR\n");
+  rprintf(F,"     --compare-dest=DIR      also compare destination files relative to DIR\n");
+  rprintf(F," -z, --compress              compress file data\n");
+  rprintf(F,"     --exclude=PATTERN       exclude files matching PATTERN\n");
+  rprintf(F,"     --exclude-from=FILE     exclude patterns listed in FILE\n");
+  rprintf(F,"     --include=PATTERN       don't exclude files matching PATTERN\n");
+  rprintf(F,"     --include-from=FILE     don't exclude patterns listed in FILE\n");
+  rprintf(F,"     --suffix=SUFFIX         override backup suffix\n");  
+  rprintf(F,"     --version               print version number\n");  
+  rprintf(F,"     --daemon                run as a rsync daemon\n");  
+  rprintf(F,"     --config=FILE           specify alternate rsyncd.conf file\n");  
+  rprintf(F,"     --port=PORT             specify alternate rsyncd port number\n");
+  rprintf(F,"     --stats                 give some file transfer stats\n");  
+  rprintf(F,"     --progress              show progress during transfer\n");  
+  rprintf(F,"     --log-format=FORMAT     log file transfers using specified format\n");  
+  rprintf(F," -h, --help                  show this help screen\n");
 
   rprintf(F,"\n");
   rprintf(F,"the backup suffix defaults to %s\n",BACKUP_SUFFIX);
   rprintf(F,"the block size defaults to %d\n",BLOCK_SIZE);  
+
+  rprintf(F,"\nPlease see the rsync(1) and rsyncd.conf(5) man pages for full documentation\n");
+  rprintf(F,"See http://samba.anu.edu.au/rsync/ for updates and bug reports\n");
 }
 
 enum {OPT_VERSION,OPT_SUFFIX,OPT_SENDER,OPT_SERVER,OPT_EXCLUDE,
       OPT_EXCLUDE_FROM,OPT_DELETE,OPT_NUMERIC_IDS,OPT_RSYNC_PATH,
-      OPT_FORCE,OPT_TIMEOUT,OPT_DAEMON,OPT_CONFIG,OPT_PORT};
+      OPT_FORCE,OPT_TIMEOUT,OPT_DAEMON,OPT_CONFIG,OPT_PORT,
+      OPT_INCLUDE, OPT_INCLUDE_FROM, OPT_STATS, OPT_PARTIAL, OPT_PROGRESS,
+      OPT_SAFE_LINKS, OPT_COMPARE_DEST, OPT_LOG_FORMAT};
 
 static char *short_options = "oblLWHpguDCtcahvrRIxnSe:B:T:z";
 
@@ -134,6 +162,8 @@ static struct option long_options[] = {
   {"numeric-ids", 0,     0,    OPT_NUMERIC_IDS},
   {"exclude",     1,     0,    OPT_EXCLUDE},
   {"exclude-from",1,     0,    OPT_EXCLUDE_FROM},
+  {"include",     1,     0,    OPT_INCLUDE},
+  {"include-from",1,     0,    OPT_INCLUDE_FROM},
   {"rsync-path",  1,     0,    OPT_RSYNC_PATH},
   {"one-file-system",0,  0,    'x'},
   {"ignore-times",0,     0,    'I'},
@@ -152,6 +182,7 @@ static struct option long_options[] = {
   {"perms",       0,     0,    'p'},
   {"links",       0,     0,    'l'},
   {"copy-links",  0,     0,    'L'},
+  {"safe-links",  0,     0,    OPT_SAFE_LINKS},
   {"whole-file",  0,     0,    'W'},
   {"hard-links",  0,     0,    'H'},
   {"owner",       0,     0,    'o'},
@@ -162,300 +193,354 @@ static struct option long_options[] = {
   {"block-size",  1,     0,    'B'},
   {"timeout",     1,     0,    OPT_TIMEOUT},
   {"temp-dir",    1,     0,    'T'},
+  {"compare-dest", 1,    0,    OPT_COMPARE_DEST},
   {"compress",	  0,	 0,    'z'},
   {"daemon",      0,     0,    OPT_DAEMON},
+  {"stats",       0,     0,    OPT_STATS},
+  {"progress",    0,     0,    OPT_PROGRESS},
+  {"partial",     0,     0,    OPT_PARTIAL},
   {"config",      1,     0,    OPT_CONFIG},
   {"port",        1,     0,    OPT_PORT},
+  {"log-format",  1,     0,    OPT_LOG_FORMAT},
   {0,0,0,0}};
 
-void parse_arguments(int argc, char *argv[])
+
+int parse_arguments(int argc, char *argv[])
 {
-    int opt;
-    int option_index;
+	int opt;
+	int option_index;
 
-    while ((opt = getopt_long(argc, argv, 
-			      short_options, long_options, &option_index)) 
-	   != -1) {
-      switch (opt) 
-	{
-	case OPT_VERSION:
-	  printf("rsync version %s  protocol version %d\n",
-		 VERSION,PROTOCOL_VERSION);
-	  exit_cleanup(0);
+	while ((opt = getopt_long(argc, argv, 
+				  short_options, long_options, &option_index)) 
+	       != -1) {
+		switch (opt) {
+		case OPT_VERSION:
+			rprintf(FINFO,"rsync version %s  protocol version %d\n\n",
+				VERSION,PROTOCOL_VERSION);
+			rprintf(FINFO,"Written by Andrew Tridgell and Paul Mackerras\n");
+			exit_cleanup(0);
+			
+		case OPT_SUFFIX:
+			backup_suffix = optarg;
+			break;
+			
+		case OPT_RSYNC_PATH:
+			rsync_path = optarg;
+			break;
+			
+		case 'I':
+			ignore_times = 1;
+			break;
 
-	case OPT_SUFFIX:
-	  backup_suffix = optarg;
-	  break;
+		case 'x':
+			one_file_system=1;
+			break;
 
-	case OPT_RSYNC_PATH:
-	  rsync_path = optarg;
-	  break;
+		case OPT_DELETE:
+			delete_mode = 1;
+			break;
 
-	case 'I':
-	  ignore_times = 1;
-	  break;
+		case OPT_FORCE:
+			force_delete = 1;
+			break;
 
-	case 'x':
-	  one_file_system=1;
-	  break;
+		case OPT_NUMERIC_IDS:
+			numeric_ids = 1;
+			break;
 
-	case OPT_DELETE:
-	  delete_mode = 1;
-	  break;
+		case OPT_EXCLUDE:
+			add_exclude(optarg, 0);
+			break;
 
-	case OPT_FORCE:
-	  force_delete = 1;
-	  break;
+		case OPT_INCLUDE:
+			add_exclude(optarg, 1);
+			break;
 
-	case OPT_NUMERIC_IDS:
-	  numeric_ids = 1;
-	  break;
+		case OPT_EXCLUDE_FROM:
+			add_exclude_file(optarg,1, 0);
+			break;
 
-	case OPT_EXCLUDE:
-	  add_exclude(optarg);
-	  break;
+		case OPT_INCLUDE_FROM:
+			add_exclude_file(optarg,1, 1);
+			break;
 
-	case OPT_EXCLUDE_FROM:
-	  add_exclude_file(optarg,1);
-	  break;
+		case OPT_SAFE_LINKS:
+			safe_symlinks=1;
+			break;
 
-	case 'h':
-	  usage(FINFO);
-	  exit_cleanup(0);
+		case 'h':
+			usage(FINFO);
+			exit_cleanup(0);
 
-	case 'b':
-	  make_backups=1;
-	  break;
+		case 'b':
+			make_backups=1;
+			break;
 
-	case 'n':
-	  dry_run=1;
-	  break;
+		case 'n':
+			dry_run=1;
+			break;
 
-	case 'S':
-	  sparse_files=1;
-	  break;
+		case 'S':
+			sparse_files=1;
+			break;
 
-	case 'C':
-	  cvs_exclude=1;
-	  break;
+		case 'C':
+			cvs_exclude=1;
+			break;
 
-	case 'u':
-	  update_only=1;
-	  break;
+		case 'u':
+			update_only=1;
+			break;
 
-	case 'l':
-	  preserve_links=1;
-	  break;
+		case 'l':
+			preserve_links=1;
+			break;
 
-	case 'L':
-	  copy_links=1;
-	  break;
+		case 'L':
+			copy_links=1;
+			break;
 
-	case 'W':
-	  whole_file=1;
-	  break;
+		case 'W':
+			whole_file=1;
+			break;
 
-	case 'H':
+		case 'H':
 #if SUPPORT_HARD_LINKS
-	  preserve_hard_links=1;
+			preserve_hard_links=1;
 #else 
-	  rprintf(FERROR,"ERROR: hard links not supported on this platform\n");
-	  exit_cleanup(1);
+			rprintf(FERROR,"ERROR: hard links not supported on this platform\n");
+			return 0;
 #endif
-	  break;
+			break;
 
-	case 'p':
-	  preserve_perms=1;
-	  break;
+		case 'p':
+			preserve_perms=1;
+			break;
 
-	case 'o':
-	  preserve_uid=1;
-	  break;
+		case 'o':
+			preserve_uid=1;
+			break;
 
-	case 'g':
-	  preserve_gid=1;
-	  break;
+		case 'g':
+			preserve_gid=1;
+			break;
 
-	case 'D':
-	  preserve_devices=1;
-	  break;
+		case 'D':
+			preserve_devices=1;
+			break;
 
-	case 't':
-	  preserve_times=1;
-	  break;
+		case 't':
+			preserve_times=1;
+			break;
 
-	case 'c':
-	  always_checksum=1;
-	  break;
+		case 'c':
+			always_checksum=1;
+			break;
 
-	case 'v':
-	  verbose++;
-	  break;
+		case 'v':
+			verbose++;
+			break;
 
-	case 'a':
-	  recurse=1;
+		case 'a':
+			recurse=1;
 #if SUPPORT_LINKS
-	  preserve_links=1;
+			preserve_links=1;
 #endif
-	  preserve_perms=1;
-	  preserve_times=1;
-	  preserve_gid=1;
-	  if (am_root) {
-	    preserve_devices=1;
-	    preserve_uid=1;
-	  }
-	  break;
+			preserve_perms=1;
+			preserve_times=1;
+			preserve_gid=1;
+			if (am_root) {
+				preserve_devices=1;
+				preserve_uid=1;
+			}
+			break;
 
-	case OPT_SERVER:
-	  am_server = 1;
-	  break;
+		case OPT_SERVER:
+			am_server = 1;
+			break;
 
-	case OPT_SENDER:
-	  if (!am_server) {
-	    usage(FERROR);
-	    exit_cleanup(1);
-	  }
-	  am_sender = 1;
-	  break;
+		case OPT_SENDER:
+			if (!am_server) {
+				usage(FERROR);
+				exit_cleanup(RERR_SYNTAX);
+			}
+			am_sender = 1;
+			break;
 
-	case 'r':
-	  recurse = 1;
-	  break;
+		case 'r':
+			recurse = 1;
+			break;
 
-	case 'R':
-	  relative_paths = 1;
-	  break;
+		case 'R':
+			relative_paths = 1;
+			break;
 
-	case 'e':
-	  shell_cmd = optarg;
-	  break;
+		case 'e':
+			shell_cmd = optarg;
+			break;
 
-	case 'B':
-	  block_size = atoi(optarg);
-	  break;
+		case 'B':
+			block_size = atoi(optarg);
+			break;
 
-	case OPT_TIMEOUT:
-	  io_timeout = atoi(optarg);
-	  break;
+		case OPT_TIMEOUT:
+			io_timeout = atoi(optarg);
+			break;
 
-	case 'T':
-		tmpdir = optarg;
-		break;
+		case 'T':
+			tmpdir = optarg;
+			break;
 
-        case 'z':
-	  do_compression = 1;
-	  break;
+		case OPT_COMPARE_DEST:
+			compare_dest = optarg;
+			break;
 
-	case OPT_DAEMON:
-		am_daemon = 1;
-		break;
+		case 'z':
+			do_compression = 1;
+			break;
 
-	case OPT_CONFIG:
-		config_file = optarg;
-		break;
+		case OPT_DAEMON:
+			am_daemon = 1;
+			break;
 
-	case OPT_PORT:
-		rsync_port = atoi(optarg);
-		break;
+		case OPT_STATS:
+			do_stats = 1;
+			break;
 
-	default:
-	  /* rprintf(FERROR,"bad option -%c\n",opt); */
-	  exit_cleanup(1);
+		case OPT_PROGRESS:
+			do_progress = 1;
+			break;
+
+		case OPT_PARTIAL:
+			keep_partial = 1;
+			break;
+
+		case OPT_CONFIG:
+			config_file = optarg;
+			break;
+
+		case OPT_PORT:
+			rsync_port = atoi(optarg);
+			break;
+
+		case OPT_LOG_FORMAT:
+			log_format = optarg;
+			break;
+
+		default:
+			return 0;
+		}
 	}
-    }
+	return 1;
 }
 
 
 void server_options(char **args,int *argc)
 {
-  int ac = *argc;
-  static char argstr[50];
-  static char bsize[30];
-  static char iotime[30];
-  int i, x;
+	int ac = *argc;
+	static char argstr[50];
+	static char bsize[30];
+	static char iotime[30];
+	int i, x;
 
-  args[ac++] = "--server";
+	args[ac++] = "--server";
 
-  if (!am_sender)
-    args[ac++] = "--sender";
+	if (!am_sender)
+		args[ac++] = "--sender";
 
-  x = 1;
-  argstr[0] = '-';
-  for (i=0;i<verbose;i++)
-    argstr[x++] = 'v';
-  if (make_backups)
-    argstr[x++] = 'b';
-  if (update_only)
-    argstr[x++] = 'u';
-  if (dry_run)
-    argstr[x++] = 'n';
-  if (preserve_links)
-    argstr[x++] = 'l';
-  if (copy_links)
-    argstr[x++] = 'L';
-  if (whole_file)
-    argstr[x++] = 'W';
-  if (preserve_hard_links)
-    argstr[x++] = 'H';
-  if (preserve_uid)
-    argstr[x++] = 'o';
-  if (preserve_gid)
-    argstr[x++] = 'g';
-  if (preserve_devices)
-    argstr[x++] = 'D';
-  if (preserve_times)
-    argstr[x++] = 't';
-  if (preserve_perms)
-    argstr[x++] = 'p';
-  if (recurse)
-    argstr[x++] = 'r';
-  if (always_checksum)
-    argstr[x++] = 'c';
-  if (cvs_exclude)
-    argstr[x++] = 'C';
-  if (ignore_times)
-    argstr[x++] = 'I';
-  if (relative_paths)
-    argstr[x++] = 'R';
-  if (one_file_system)
-    argstr[x++] = 'x';
-  if (sparse_files)
-    argstr[x++] = 'S';
-  if (do_compression)
-    argstr[x++] = 'z';
-  argstr[x] = 0;
+	x = 1;
+	argstr[0] = '-';
+	for (i=0;i<verbose;i++)
+		argstr[x++] = 'v';
+	if (make_backups)
+		argstr[x++] = 'b';
+	if (update_only)
+		argstr[x++] = 'u';
+	if (dry_run)
+		argstr[x++] = 'n';
+	if (preserve_links)
+		argstr[x++] = 'l';
+	if (copy_links)
+		argstr[x++] = 'L';
+	if (whole_file)
+		argstr[x++] = 'W';
+	if (preserve_hard_links)
+		argstr[x++] = 'H';
+	if (preserve_uid)
+		argstr[x++] = 'o';
+	if (preserve_gid)
+		argstr[x++] = 'g';
+	if (preserve_devices)
+		argstr[x++] = 'D';
+	if (preserve_times)
+		argstr[x++] = 't';
+	if (preserve_perms)
+		argstr[x++] = 'p';
+	if (recurse)
+		argstr[x++] = 'r';
+	if (always_checksum)
+		argstr[x++] = 'c';
+	if (cvs_exclude)
+		argstr[x++] = 'C';
+	if (ignore_times)
+		argstr[x++] = 'I';
+	if (relative_paths)
+		argstr[x++] = 'R';
+	if (one_file_system)
+		argstr[x++] = 'x';
+	if (sparse_files)
+		argstr[x++] = 'S';
+	if (do_compression)
+		argstr[x++] = 'z';
+	argstr[x] = 0;
 
-  if (x != 1) args[ac++] = argstr;
+	if (x != 1) args[ac++] = argstr;
 
-  if (block_size != BLOCK_SIZE) {
-    sprintf(bsize,"-B%d",block_size);
-    args[ac++] = bsize;
-  }    
+	if (block_size != BLOCK_SIZE) {
+		sprintf(bsize,"-B%d",block_size);
+		args[ac++] = bsize;
+	}    
 
-  if (io_timeout) {
-    sprintf(iotime,"--timeout=%d",io_timeout);
-    args[ac++] = iotime;
-  }    
+	if (io_timeout) {
+		sprintf(iotime,"--timeout=%d",io_timeout);
+		args[ac++] = iotime;
+	}    
 
-  if (strcmp(backup_suffix, BACKUP_SUFFIX)) {
-	  args[ac++] = "--suffix";
-	  args[ac++] = backup_suffix;
-  }
+	if (strcmp(backup_suffix, BACKUP_SUFFIX)) {
+		args[ac++] = "--suffix";
+		args[ac++] = backup_suffix;
+	}
 
-  if (delete_mode)
-    args[ac++] = "--delete";
+	if (delete_mode)
+		args[ac++] = "--delete";
 
-  if (force_delete)
-    args[ac++] = "--force";
+	if (keep_partial)
+		args[ac++] = "--partial";
 
-  if (numeric_ids)
-    args[ac++] = "--numeric-ids";
+	if (force_delete)
+		args[ac++] = "--force";
 
-  if (tmpdir) {
-	  args[ac++] = "--temp-dir";
-	  args[ac++] = tmpdir;
-  }
+	if (safe_symlinks)
+		args[ac++] = "--safe-links";
 
-  *argc = ac;
+	if (numeric_ids)
+		args[ac++] = "--numeric-ids";
+
+	if (tmpdir) {
+		args[ac++] = "--temp-dir";
+		args[ac++] = tmpdir;
+	}
+
+	if (compare_dest && am_sender) {
+		/* the server only needs this option if it is not the sender,
+		 *   and it may be an older version that doesn't know this
+		 *   option, so don't send it if client is the sender.
+		 */
+		args[ac++] = "--compare-dest";
+		args[ac++] = compare_dest;
+	}
+
+
+	*argc = ac;
 }
 

packaging/redhat/5.0/rsync.spec

@@ -0,0 +1,79 @@
+Summary: Program for efficient remote updates of files.
+Name: rsync
+Version: 2.2.0
+Release: 1
+Copyright: GPL
+Group: Applications/Networking
+Source:	ftp://samba.anu.edu.au/pub/rsync/rsync-2.2.0.tar.gz
+URL: http://samba.anu.edu.au/rsync/
+Packager: Andrew Tridgell <tridge@samba.anu.edu.au>
+BuildRoot: /tmp/rsync
+
+%description
+rsync is a replacement for rcp that has many more features.
+
+rsync uses the "rsync algorithm" which provides a very fast method for
+bringing remote files into sync. It does this by sending just the
+differences in the files across the link, without requiring that both
+sets of files are present at one of the ends of the link beforehand.
+
+A technical report describing the rsync algorithm is included with
+this package. 
+
+%changelog
+* Mon May 18 1998 Andrew Tridgell <tridge@samba.anu.edu.au>
+  reworked for auto-building when I release rsync (tridge@samba.anu.edu.au)
+
+* Sat May 16 1998 John H Terpstra <jht@aquasoft.com.au>
+  Upgraded to Rsync 2.0.6
+    -new feature anonymous rsync
+
+* Mon Apr  6 1998 Douglas N. Arnold <dna@math.psu.edu>
+
+Upgrade to rsync version 1.7.2.
+
+* Sun Mar  1 1998 Douglas N. Arnold <dna@math.psu.edu>
+
+Built 1.6.9-1 based on the 1.6.3-2 spec file of John A. Martin.
+Changes from 1.6.3-2 packaging: added latex and dvips commands
+to create tech_report.ps.
+
+* Mon Aug 25 1997 John A. Martin <jam@jamux.com>
+
+Built 1.6.3-2 after finding no rsync-1.6.3-1.src.rpm although there
+was an ftp://ftp.redhat.com/pub/contrib/alpha/rsync-1.6.3-1.alpha.rpm
+showing no packager nor signature but giving 
+"Source RPM: rsync-1.6.3-1.src.rpm".
+
+Changes from 1.6.2-1 packaging: added '$RPM_OPT_FLAGS' to make, strip
+to '%build', removed '%prefix'.
+
+* Thu Apr 10 1997 Michael De La Rue <miked@ed.ac.uk>
+
+rsync-1.6.2-1 packaged.  (This entry by jam to credit Michael for the
+previous package(s).)
+
+%prep
+%setup
+
+%build
+./configure --prefix=/usr
+make CFLAGS=$RPM_OPT_FLAGS
+strip rsync
+
+%install
+mkdir -p $RPM_BUILD_ROOT/usr/{bin,man/{man1,man5}}
+install -m755 rsync $RPM_BUILD_ROOT/usr/bin
+install -m644 rsync.1 $RPM_BUILD_ROOT/usr/man/man1
+install -m644 rsyncd.conf.5 $RPM_BUILD_ROOT/usr/man/man5
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%attr(-,root,root) /usr/bin/rsync
+%attr(-,root,root) /usr/man/man1/rsync.1
+%attr(-,root,root) /usr/man/man5/rsyncd.conf.5
+%attr(-,root,root) %doc tech_report.tex
+%attr(-,root,root) %doc README
+%attr(-,root,root) %doc COPYING

packaging/redhat/5.0/rsync.spec.tmpl

@@ -0,0 +1,79 @@
+Summary: Program for efficient remote updates of files.
+Name: rsync
+Version: PVERSION
+Release: PRELEASE
+Copyright: GPL
+Group: Applications/Networking
+Source:	ftp://samba.anu.edu.au/pub/rsync/rsync-PVERSION.tar.gz
+URL: http://samba.anu.edu.au/rsync/
+Packager: Andrew Tridgell <tridge@samba.anu.edu.au>
+BuildRoot: /tmp/rsync
+
+%description
+rsync is a replacement for rcp that has many more features.
+
+rsync uses the "rsync algorithm" which provides a very fast method for
+bringing remote files into sync. It does this by sending just the
+differences in the files across the link, without requiring that both
+sets of files are present at one of the ends of the link beforehand.
+
+A technical report describing the rsync algorithm is included with
+this package. 
+
+%changelog
+* Mon May 18 1998 Andrew Tridgell <tridge@samba.anu.edu.au>
+  reworked for auto-building when I release rsync (tridge@samba.anu.edu.au)
+
+* Sat May 16 1998 John H Terpstra <jht@aquasoft.com.au>
+  Upgraded to Rsync 2.0.6
+    -new feature anonymous rsync
+
+* Mon Apr  6 1998 Douglas N. Arnold <dna@math.psu.edu>
+
+Upgrade to rsync version 1.7.2.
+
+* Sun Mar  1 1998 Douglas N. Arnold <dna@math.psu.edu>
+
+Built 1.6.9-1 based on the 1.6.3-2 spec file of John A. Martin.
+Changes from 1.6.3-2 packaging: added latex and dvips commands
+to create tech_report.ps.
+
+* Mon Aug 25 1997 John A. Martin <jam@jamux.com>
+
+Built 1.6.3-2 after finding no rsync-1.6.3-1.src.rpm although there
+was an ftp://ftp.redhat.com/pub/contrib/alpha/rsync-1.6.3-1.alpha.rpm
+showing no packager nor signature but giving 
+"Source RPM: rsync-1.6.3-1.src.rpm".
+
+Changes from 1.6.2-1 packaging: added '$RPM_OPT_FLAGS' to make, strip
+to '%build', removed '%prefix'.
+
+* Thu Apr 10 1997 Michael De La Rue <miked@ed.ac.uk>
+
+rsync-1.6.2-1 packaged.  (This entry by jam to credit Michael for the
+previous package(s).)
+
+%prep
+%setup
+
+%build
+./configure --prefix=/usr
+make CFLAGS=$RPM_OPT_FLAGS
+strip rsync
+
+%install
+mkdir -p $RPM_BUILD_ROOT/usr/{bin,man/{man1,man5}}
+install -m755 rsync $RPM_BUILD_ROOT/usr/bin
+install -m644 rsync.1 $RPM_BUILD_ROOT/usr/man/man1
+install -m644 rsyncd.conf.5 $RPM_BUILD_ROOT/usr/man/man5
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%attr(-,root,root) /usr/bin/rsync
+%attr(-,root,root) /usr/man/man1/rsync.1
+%attr(-,root,root) /usr/man/man5/rsyncd.conf.5
+%attr(-,root,root) %doc tech_report.tex
+%attr(-,root,root) %doc README
+%attr(-,root,root) %doc COPYING

params.c

@@ -77,7 +77,6 @@
 #define BOOL int
 #define False 0
 #define True 1
-#define Realloc realloc
 
 /* -------------------------------------------------------------------------- **
  * Constants...

receiver.c

@@ -0,0 +1,471 @@
+/* 
+   Copyright (C) Andrew Tridgell 1996
+   Copyright (C) Paul Mackerras 1996
+   
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+   
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "rsync.h"
+
+extern int verbose;
+extern int recurse;
+extern int delete_mode;
+extern int remote_version;
+extern int csum_length;
+extern struct stats stats;
+extern int dry_run;
+extern int am_server;
+extern int relative_paths;
+extern int preserve_hard_links;
+extern int cvs_exclude;
+extern int io_error;
+extern char *tmpdir;
+extern char *compare_dest;
+
+
+static struct delete_list {
+	dev_t dev;
+	INO_T inode;
+} *delete_list;
+static int dlist_len, dlist_alloc_len;
+
+
+/* yuck! This function wouldn't have been necessary if I had the sorting
+   algorithm right. Unfortunately fixing the sorting algorithm would introduce
+   a backward incompatibility as file list indexes are sent over the link.
+*/
+static int delete_already_done(struct file_list *flist,int j)
+{
+	int i;
+	STRUCT_STAT st;
+
+	if (link_stat(f_name(flist->files[j]), &st)) return 1;
+
+	for (i=0;i<dlist_len;i++) {
+		if (st.st_ino == delete_list[i].inode &&
+		    st.st_dev == delete_list[i].dev)
+			return 1;
+	}
+
+	return 0;
+}
+
+static void add_delete_entry(struct file_struct *file)
+{
+	if (dlist_len == dlist_alloc_len) {
+		dlist_alloc_len += 1024;
+		delete_list = (struct delete_list *)Realloc(delete_list, sizeof(delete_list[0])*dlist_alloc_len);
+		if (!delete_list) out_of_memory("add_delete_entry");
+	}
+
+	delete_list[dlist_len].dev = file->dev;
+	delete_list[dlist_len].inode = file->inode;
+	dlist_len++;
+
+	if (verbose > 3)
+		rprintf(FINFO,"added %s to delete list\n", f_name(file));
+}
+
+static void delete_one(struct file_struct *f)
+{
+	if (!S_ISDIR(f->mode)) {
+		if (do_unlink(f_name(f)) != 0) {
+			rprintf(FERROR,"unlink %s : %s\n",f_name(f),strerror(errno));
+		} else if (verbose) {
+			rprintf(FINFO,"deleting %s\n",f_name(f));
+		}
+	} else {    
+		if (do_rmdir(f_name(f)) != 0) {
+			if (errno != ENOTEMPTY && errno != EEXIST)
+				rprintf(FERROR,"rmdir %s : %s\n",f_name(f),strerror(errno));
+		} else if (verbose) {
+			rprintf(FINFO,"deleting directory %s\n",f_name(f));      
+		}
+	}
+}
+
+
+
+
+/* this deletes any files on the receiving side that are not present
+   on the sending side. For version 1.6.4 I have changed the behaviour
+   to match more closely what most people seem to expect of this option */
+static void delete_files(struct file_list *flist)
+{
+	struct file_list *local_file_list;
+	int i, j;
+	char *name;
+
+	if (cvs_exclude)
+		add_cvs_excludes();
+
+	if (io_error) {
+		rprintf(FINFO,"IO error encountered - skipping file deletion\n");
+		return;
+	}
+
+	for (j=0;j<flist->count;j++) {
+		if (!S_ISDIR(flist->files[j]->mode) || 
+		    !(flist->files[j]->flags & FLAG_DELETE)) continue;
+
+		if (remote_version < 19 &&
+		    delete_already_done(flist, j)) continue;
+
+		name = strdup(f_name(flist->files[j]));
+
+		if (!(local_file_list = send_file_list(-1,1,&name))) {
+			free(name);
+			continue;
+		}
+
+		if (verbose > 1)
+			rprintf(FINFO,"deleting in %s\n", name);
+
+		for (i=local_file_list->count-1;i>=0;i--) {
+			if (!local_file_list->files[i]->basename) continue;
+			if (remote_version < 19 &&
+			    S_ISDIR(local_file_list->files[i]->mode))
+				add_delete_entry(local_file_list->files[i]);
+			if (-1 == flist_find(flist,local_file_list->files[i])) {
+				delete_one(local_file_list->files[i]);
+			}    
+		}
+		flist_free(local_file_list);
+		free(name);
+	}
+}
+
+
+static int get_tmpname(char *fnametmp, char *fname)
+{
+	char *f;
+
+	/* open tmp file */
+	if (tmpdir) {
+		f = strrchr(fname,'/');
+		if (f == NULL) 
+			f = fname;
+		else 
+			f++;
+		if (strlen(tmpdir)+strlen(f)+10 > MAXPATHLEN) {
+			rprintf(FERROR,"filename too long\n");
+			return 0;
+		}
+		slprintf(fnametmp,MAXPATHLEN-1, "%s/.%s.XXXXXX",tmpdir,f);
+		return 1;
+	} 
+
+	f = strrchr(fname,'/');
+
+	if (strlen(fname)+9 > MAXPATHLEN) {
+		rprintf(FERROR,"filename too long\n");
+		return 0;
+	}
+
+	if (f) {
+		*f = 0;
+		slprintf(fnametmp,MAXPATHLEN-1,"%s/.%s.XXXXXX",
+			 fname,f+1);
+		*f = '/';
+	} else {
+		slprintf(fnametmp,MAXPATHLEN-1,".%s.XXXXXX",fname);
+	}
+
+	return 1;
+}
+
+
+static int receive_data(int f_in,struct map_struct *buf,int fd,char *fname,
+			OFF_T total_size)
+{
+	int i,n,remainder,len,count;
+	OFF_T offset = 0;
+	OFF_T offset2;
+	char *data;
+	static char file_sum1[MD4_SUM_LENGTH];
+	static char file_sum2[MD4_SUM_LENGTH];
+	char *map=NULL;
+	
+	count = read_int(f_in);
+	n = read_int(f_in);
+	remainder = read_int(f_in);
+	
+	sum_init();
+	
+	for (i=recv_token(f_in,&data); i != 0; i=recv_token(f_in,&data)) {
+
+		show_progress(offset, total_size);
+
+		if (i > 0) {
+			extern int cleanup_got_literal;
+
+			if (verbose > 3) {
+				rprintf(FINFO,"data recv %d at %d\n",
+					i,(int)offset);
+			}
+
+			stats.literal_data += i;
+			cleanup_got_literal = 1;
+      
+			sum_update(data,i);
+
+			if (fd != -1 && write_file(fd,data,i) != i) {
+				rprintf(FERROR,"write failed on %s : %s\n",fname,strerror(errno));
+				exit_cleanup(RERR_FILEIO);
+			}
+			offset += i;
+			continue;
+		} 
+
+		i = -(i+1);
+		offset2 = i*n;
+		len = n;
+		if (i == count-1 && remainder != 0)
+			len = remainder;
+		
+		stats.matched_data += len;
+		
+		if (verbose > 3)
+			rprintf(FINFO,"chunk[%d] of size %d at %d offset=%d\n",
+				i,len,(int)offset2,(int)offset);
+		
+		map = map_ptr(buf,offset2,len);
+		
+		see_token(map, len);
+		sum_update(map,len);
+		
+		if (fd != -1 && write_file(fd,map,len) != len) {
+			rprintf(FERROR,"write failed on %s : %s\n",
+				fname,strerror(errno));
+			exit_cleanup(RERR_FILEIO);
+		}
+		offset += len;
+	}
+
+	end_progress();
+
+	if (fd != -1 && offset > 0 && sparse_end(fd) != 0) {
+		rprintf(FERROR,"write failed on %s : %s\n",
+			fname,strerror(errno));
+		exit_cleanup(RERR_FILEIO);
+	}
+
+	sum_end(file_sum1);
+
+	if (remote_version >= 14) {
+		read_buf(f_in,file_sum2,MD4_SUM_LENGTH);
+		if (verbose > 2) {
+			rprintf(FINFO,"got file_sum\n");
+		}
+		if (fd != -1 && 
+		    memcmp(file_sum1,file_sum2,MD4_SUM_LENGTH) != 0) {
+			return 0;
+		}
+	}
+	return 1;
+}
+
+
+
+int recv_files(int f_in,struct file_list *flist,char *local_name,int f_gen)
+{  
+	int fd1,fd2;
+	STRUCT_STAT st;
+	char *fname;
+	char fnametmp[MAXPATHLEN];
+	char *fnamecmp;
+	char fnamecmpbuf[MAXPATHLEN];
+	struct map_struct *buf;
+	int i;
+	struct file_struct *file;
+	int phase=0;
+	int recv_ok;
+	extern struct stats stats;		
+	struct stats initial_stats;
+
+	if (verbose > 2) {
+		rprintf(FINFO,"recv_files(%d) starting\n",flist->count);
+	}
+
+	if (recurse && delete_mode && !local_name && flist->count>0) {
+		delete_files(flist);
+	}
+
+	while (1) {      
+		cleanup_disable();
+
+		i = read_int(f_in);
+		if (i == -1) {
+			if (phase==0 && remote_version >= 13) {
+				phase++;
+				csum_length = SUM_LENGTH;
+				if (verbose > 2)
+					rprintf(FINFO,"recv_files phase=%d\n",phase);
+				write_int(f_gen,-1);
+				continue;
+			}
+			break;
+		}
+
+		if (i < 0 || i >= flist->count) {
+			rprintf(FERROR,"Invalid file index %d in recv_files (count=%d)\n", 
+				i, flist->count);
+			exit_cleanup(RERR_PROTOCOL);
+		}
+
+		file = flist->files[i];
+		fname = f_name(file);
+
+		stats.num_transferred_files++;
+		stats.total_transferred_size += file->length;
+
+		if (local_name)
+			fname = local_name;
+
+		if (dry_run) {
+			if (!am_server) {
+				log_transfer(file, fname);
+			}
+			continue;
+		}
+
+		initial_stats = stats;
+
+		if (verbose > 2)
+			rprintf(FINFO,"recv_files(%s)\n",fname);
+
+		fnamecmp = fname;
+
+		/* open the file */  
+		fd1 = open(fnamecmp,O_RDONLY);
+
+		if ((fd1 == -1) && (compare_dest != NULL)) {
+			/* try the file at compare_dest instead */
+			slprintf(fnamecmpbuf,MAXPATHLEN-1,"%s/%s",
+						compare_dest,fname);
+			fnamecmp = fnamecmpbuf;
+			fd1 = open(fnamecmp,O_RDONLY);
+		}
+
+		if (fd1 != -1 && do_fstat(fd1,&st) != 0) {
+			rprintf(FERROR,"fstat %s : %s\n",fnamecmp,strerror(errno));
+			receive_data(f_in,NULL,-1,NULL,file->length);
+			close(fd1);
+			continue;
+		}
+
+		if (fd1 != -1 && !S_ISREG(st.st_mode)) {
+			rprintf(FERROR,"%s : not a regular file (recv_files)\n",fnamecmp);
+			receive_data(f_in,NULL,-1,NULL,file->length);
+			close(fd1);
+			continue;
+		}
+
+		if (fd1 != -1 && st.st_size > 0) {
+			buf = map_file(fd1,st.st_size);
+			if (verbose > 2)
+				rprintf(FINFO,"recv mapped %s of size %d\n",fnamecmp,(int)st.st_size);
+		} else {
+			buf = NULL;
+		}
+
+		if (!get_tmpname(fnametmp,fname)) {
+			if (buf) unmap_file(buf);
+			if (fd1 != -1) close(fd1);
+			continue;
+		}
+
+		if (NULL == do_mktemp(fnametmp)) {
+			rprintf(FERROR,"mktemp %s failed\n",fnametmp);
+			receive_data(f_in,buf,-1,NULL,file->length);
+			if (buf) unmap_file(buf);
+			if (fd1 != -1) close(fd1);
+			continue;
+		}
+
+		/* we initially set the perms without the
+		   setuid/setgid bits to ensure that there is no race
+		   condition. They are then correctly updated after
+		   the lchown. Thanks to snabb@epipe.fi for pointing
+		   this out */
+		fd2 = do_open(fnametmp,O_WRONLY|O_CREAT|O_EXCL,
+			      file->mode & ACCESSPERMS);
+
+		if (fd2 == -1 && relative_paths && errno == ENOENT && 
+		    create_directory_path(fnametmp) == 0) {
+			fd2 = do_open(fnametmp,O_WRONLY|O_CREAT|O_EXCL,
+				      file->mode & ACCESSPERMS);
+		}
+		if (fd2 == -1) {
+			rprintf(FERROR,"open %s : %s\n",fnametmp,strerror(errno));
+			receive_data(f_in,buf,-1,NULL,file->length);
+			if (buf) unmap_file(buf);
+			if (fd1 != -1) close(fd1);
+			continue;
+		}
+      
+		cleanup_set(fnametmp, fname, file, buf, fd1, fd2);
+
+		if (!am_server) {
+			log_transfer(file, fname);
+		}
+
+		/* recv file data */
+		recv_ok = receive_data(f_in,buf,fd2,fname,file->length);
+
+		log_recv(file, &initial_stats);
+		
+		if (buf) unmap_file(buf);
+		if (fd1 != -1) {
+			close(fd1);
+		}
+		close(fd2);
+		
+		if (verbose > 2)
+			rprintf(FINFO,"renaming %s to %s\n",fnametmp,fname);
+
+		finish_transfer(fname, fnametmp, file);
+
+		cleanup_disable();
+				
+		if (!recv_ok) {
+			if (csum_length == SUM_LENGTH) {
+				rprintf(FERROR,"ERROR: file corruption in %s. File changed during transfer?\n",
+					fname);
+			} else {
+				if (verbose > 1)
+					rprintf(FINFO,"redoing %s(%d)\n",fname,i);
+				write_int(f_gen,i);
+			}
+		}
+	}
+
+	if (preserve_hard_links)
+		do_hard_links(flist);
+
+	/* now we need to fix any directory permissions that were 
+	   modified during the transfer */
+	for (i = 0; i < flist->count; i++) {
+		file = flist->files[i];
+		if (!file->basename || !S_ISDIR(file->mode)) continue;
+		recv_generator(f_name(file),flist,i,-1);
+	}
+
+	if (verbose > 2)
+		rprintf(FINFO,"recv_files finished\n");
+	
+	return 0;
+}
+

rsync.h

@@ -23,6 +23,8 @@
 #define RSYNC_NAME "rsync"
 #define RSYNCD_CONF "/etc/rsyncd.conf"
 
+#define URL_PREFIX "rsync://"
+
 #define BACKUP_SUFFIX "~"
 
 /* a non-zero CHAR_OFFSET makes the rolling sum stronger, but is
@@ -41,7 +43,7 @@
 #define SAME_TIME (1<<7)
 
 /* update this if you make incompatible changes */
-#define PROTOCOL_VERSION 17
+#define PROTOCOL_VERSION 19
 #define MIN_PROTOCOL_VERSION 11
 #define MAX_PROTOCOL_VERSION 30
 
@@ -50,15 +52,18 @@
 #define SPARSE_WRITE_SIZE (1024)
 #define WRITE_SIZE (32*1024)
 #define CHUNK_SIZE (32*1024)
-#define MAX_MAP_SIZE (4*1024*1024)
-#define IO_BUFFER_SIZE (4096)
+#define MAX_MAP_SIZE (1*1024*1024)
+#define IO_BUFFER_SIZE (4092)
+#define MAX_READ_BUFFER (1024*1024)
 
 #define MAX_ARGS 1000
 
-#define BLOCKING_TIMEOUT 10
-
+#define MPLEX_BASE 7
 #define FERROR 1
 #define FINFO 2
+#define FLOG 3
+
+#include "errcode.h"
 
 #include "config.h"
 
@@ -69,6 +74,13 @@
 #endif
 
 #include <sys/types.h>
+
+#ifdef HAVE_GETOPT_LONG
+#include <getopt.h>
+#else
+#include "lib/getopt.h"
+#endif
+
 #ifdef HAVE_UNISTD_H
 #include <unistd.h>
 #endif
@@ -91,10 +103,6 @@
 #include <string.h>
 #endif
 
-#ifdef HAVE_COMPAT_H
-#include <compat.h>
-#endif
-
 #ifdef HAVE_MALLOC_H
 #include <malloc.h>
 #endif
@@ -140,8 +148,9 @@
 #endif
 #include <errno.h>
 
-#ifdef HAVE_MMAP
+#if defined(HAVE_MMAP) && defined(HAVE_MUNMAP)
 #include <sys/mman.h>
+#define USE_MMAP 1
 #endif
 
 #ifdef HAVE_UTIME_H
@@ -165,13 +174,7 @@
 #include "lib/fnmatch.h"
 #endif
 
-#ifdef HAVE_GETOPT_LONG
-#include <getopt.h>
-#else
-#include "lib/getopt.h"
-#endif
-
-#ifdef HAVE_GLOB
+#ifdef HAVE_GLOB_H
 #include <glob.h>
 #endif
 
@@ -186,14 +189,26 @@
 #include <syslog.h>
 #include <sys/file.h>
 
-#ifndef S_IFLNK
-#define S_IFLNK  0120000
+#if HAVE_DIRENT_H
+# include <dirent.h>
+#else
+# define dirent direct
+# if HAVE_SYS_NDIR_H
+#  include <sys/ndir.h>
+# endif
+# if HAVE_SYS_DIR_H
+#  include <sys/dir.h>
+# endif
+# if HAVE_NDIR_H
+#  include <ndir.h>
+# endif
 #endif
 
-#ifndef S_ISLNK
-#define S_ISLNK(mode) (((mode) & S_IFLNK) == S_IFLNK)
+#ifdef HAVE_COMPAT_H
+#include <compat.h>
 #endif
 
+
 #define BOOL int
 
 #ifndef uchar
@@ -213,6 +228,10 @@
 #define int32 long
 #elif (SIZEOF_SHORT == 4)
 #define int32 short
+#else
+/* I hope this works */
+#define int32 int
+#define LARGE_INT32
 #endif
 #endif
 
@@ -241,6 +260,12 @@
 #define NO_INT64
 #endif
 
+#if HAVE_SHORT_INO_T
+#define INO_T uint32
+#else
+#define INO_T ino_t
+#endif
+
 #ifndef MIN
 #define MIN(a,b) ((a)<(b)?(a):(b))
 #endif
@@ -266,7 +291,7 @@ struct file_struct {
 	time_t modtime;
 	OFF_T length;
 	mode_t mode;
-	ino_t inode;
+	INO_T inode;
 	dev_t dev;
 	dev_t rdev;
 	uid_t uid;
@@ -279,17 +304,17 @@ struct file_struct {
 };
 
 struct file_list {
-  int count;
-  int malloced;
-  struct file_struct **files;
+	int count;
+	int malloced;
+	struct file_struct **files;
 };
 
 struct sum_buf {
-  OFF_T offset;			/* offset in file of this chunk */
-  int len;			/* length of chunk of file */
-  int i;			/* index of this chunk */
-  uint32 sum1;	                /* simple checksum */
-  char sum2[SUM_LENGTH];	/* checksum  */
+	OFF_T offset;		/* offset in file of this chunk */
+	int len;		/* length of chunk of file */
+	int i;			/* index of this chunk */
+	uint32 sum1;	        /* simple checksum */
+	char sum2[SUM_LENGTH];	/* checksum  */
 };
 
 struct sum_struct {
@@ -306,6 +331,28 @@ struct map_struct {
 	OFF_T size, p_offset;
 };
 
+struct exclude_struct {
+	char *orig;
+	char *pattern;
+	int regular_exp;
+	int include;
+	int directory;
+	int local;
+};
+
+struct stats {
+	int64 total_size;
+	int64 total_transferred_size;
+	int64 total_written;
+	int64 total_read;
+	int64 literal_data;
+	int64 matched_data;
+	int flist_size;
+	int num_files;
+	int num_transferred_files;
+};
+
+
 /* we need this function because of the silly way in which duplicate
    entries are handled in the file lists - we can't change this
    without breaking existing versions */
@@ -315,25 +362,10 @@ static inline int flist_up(struct file_list *flist, int i)
 	return i;
 }
 
-#if HAVE_DIRENT_H
-# include <dirent.h>
-#else
-# define dirent direct
-# if HAVE_SYS_NDIR_H
-#  include <sys/ndir.h>
-# endif
-# if HAVE_SYS_DIR_H
-#  include <sys/dir.h>
-# endif
-# if HAVE_NDIR_H
-#  include <ndir.h>
-# endif
-#endif
-
 #include "byteorder.h"
 #include "version.h"
 #include "proto.h"
-#include "md4.h"
+#include "lib/mdfour.h"
 
 #if !HAVE_STRERROR
 extern char *sys_errlist[];
@@ -349,14 +381,6 @@ extern char *sys_errlist[];
 extern int errno;
 #endif
 
-#ifndef HAVE_BCOPY
-#define bcopy(src,dest,n) memcpy(dest,src,n)
-#endif
-
-#ifndef HAVE_BZERO
-#define bzero(buf,n) memset(buf,0,n)
-#endif
-
 #define SUPPORT_LINKS HAVE_READLINK
 #define SUPPORT_HARD_LINKS HAVE_LINK
 
@@ -386,6 +410,18 @@ extern int errno;
 #define S_IWUSR 0200
 #endif
 
+#ifndef _S_IFMT
+#define _S_IFMT        0170000
+#endif
+
+#ifndef _S_IFLNK
+#define _S_IFLNK  0120000
+#endif
+
+#ifndef S_ISLNK
+#define S_ISLNK(mode) (((mode) & (_S_IFMT)) == (_S_IFLNK))
+#endif
+
 #ifndef S_ISBLK
 #define S_ISBLK(mode) (((mode) & (_S_IFMT)) == (_S_IFBLK))
 #endif
@@ -421,3 +457,20 @@ extern int errno;
 
 #define IS_DEVICE(mode) (S_ISCHR(mode) || S_ISBLK(mode) || S_ISSOCK(mode) || S_ISFIFO(mode))
 
+#ifndef ACCESSPERMS
+#define ACCESSPERMS 0777
+#endif
+
+/* handler for null strings in printf format */
+#define NS(s) ((s)?(s):"<NULL>")
+
+/* use magic gcc attributes to catch format errors */
+ void rprintf(int , const char *, ...)
+#ifdef __GNUC__
+     __attribute__ ((format (printf, 2, 3)))
+#endif
+;
+
+#ifdef REPLACE_INET_NTOA
+#define inet_ntoa rep_inet_ntoa
+#endif

rsync.yo

@@ -9,9 +9,11 @@ rsync [options] path [user@]host:path
 
 rsync [options] path path
 
-rsync [options] [user@]host::path path
+rsync [options] [user@]host::module[/path] path
 
-rsync [options] path [user@]host::path
+rsync [options] path [user@]host::module[/path]
+
+rsync [options] rsync://[user@]host[:port]/module/path path
 
 manpagedescription()
 
@@ -40,7 +42,7 @@ itemize(
 
 manpagesection(GENERAL)
 
-There are five different ways of using rsync. They are:
+There are six different ways of using rsync. They are:
 
 itemize(
 	it() for copying local files. This is invoked when neither
@@ -57,11 +59,16 @@ itemize(
 
 	it() for copying from a remote rsync server to the local
 	machine. This is invoked when the source path contains a ::
-	separator. 
+	separator. You can also use a rsync:// URL if no username
+	is required.
 
 	it() for copying from the local machine to a remote rsync
 	server. This is invoked when the destination path contains a ::
 	separator. 
+
+	it() for listing files on a remote machine. This is done the
+	same way as rsync transfers except that you leave off the
+	local destination.  
 )
 
 Note that in all cases at least one of the source and destination
@@ -81,6 +88,9 @@ command line option, or by setting the RSYNC_RSH environment variable.
 One common substitute is to use ssh, which offers a high degree of
 security.
 
+Note that rsync must be installed on both the source and destination
+machines. 
+
 manpagesection(USAGE)
 
 You use rsync in the same way you use rcp. You must specify a source
@@ -137,6 +147,9 @@ itemize(
 
 	it() if you specify no path name on the remote server then the
 	list of accessible paths on the server will be shown.
+	
+	it() if you specify no local destination then a listing of the
+	specified files on the remote server is provided
 )
 
 Some paths on the remote server may require authentication. If so then
@@ -184,6 +197,68 @@ quote(rsync -az -e ssh --delete ~ftp/pub/samba/ nimbus:"~ftp/pub/tridge/samba")
 
 this is launched from cron every few hours.
 
+manpagesection(OPTIONS SUMMARY)
+
+Here is a short summary of the options avalable in rsync. Please refer
+to the detailed description below for a complete description.
+
+verb(
+Usage: rsync [OPTION]... SRC [USER@]HOST:DEST
+  or   rsync [OPTION]... [USER@]HOST:SRC DEST
+  or   rsync [OPTION]... SRC DEST
+  or   rsync [OPTION]... [USER@]HOST::SRC DEST
+  or   rsync [OPTION]... SRC [USER@]HOST::DEST
+  or   rsync [OPTION]... rsync://[USER@]HOST[:PORT]/SRC DEST
+
+Options
+ -v, --verbose               increase verbosity
+ -c, --checksum              always checksum
+ -a, --archive               archive mode
+ -r, --recursive             recurse into directories
+ -R, --relative              use relative path names
+ -b, --backup                make backups (default ~ extension)
+ -u, --update                update only (don't overwrite newer files)
+ -l, --links                 preserve soft links
+ -L, --copy-links            treat soft links like regular files
+     --safe-links            ignore links outside the destination tree
+ -H, --hard-links            preserve hard links
+ -p, --perms                 preserve permissions
+ -o, --owner                 preserve owner (root only)
+ -g, --group                 preserve group
+ -D, --devices               preserve devices (root only)
+ -t, --times                 preserve times
+ -S, --sparse                handle sparse files efficiently
+ -n, --dry-run               show what would have been transferred
+ -W, --whole-file            copy whole files, no incremental checks
+ -x, --one-file-system       don't cross filesystem boundaries
+ -B, --block-size=SIZE       checksum blocking size
+ -e, --rsh=COMMAND           specify rsh replacement
+     --rsync-path=PATH       specify path to rsync on the remote machine
+ -C, --cvs-exclude           auto ignore files in the same way CVS does
+     --delete                delete files that don't exist on the sending side
+     --partial               keep partially transferred files
+     --force                 force deletion of directories even if not empty
+     --numeric-ids           don't map uid/gid values by user/group name
+     --timeout=TIME          set IO timeout in seconds
+ -I, --ignore-times          don't exclude files that match length and time
+ -T  --temp-dir=DIR          create temporary files in directory DIR
+     --compare-dest=DIR      also compare destination files relative to DIR
+ -z, --compress              compress file data
+     --exclude=PATTERN       exclude files matching PATTERN
+     --exclude-from=FILE     exclude files listed in FILE
+     --include=PATTERN       don't exclude files matching PATTERN
+     --include-from=FILE     don't exclude files listed in FILE
+     --suffix=SUFFIX         override backup suffix
+     --version               print version number
+     --daemon                run as a rsync daemon
+     --config=FILE           specify alternate rsyncd.conf file
+     --port=PORT             specify alternate rsyncd port number
+     --stats                 give some file transfer stats
+     --progress              show progress during transfer
+     --log-format=FORMAT     log file transfers using specified format
+ -h, --help                  show this help screen
+)
+
 manpageoptions()
 
 rsync uses the GNU long options package. Many of the command line
@@ -214,9 +289,12 @@ explicitly checked on the receiver and any files of the same name
 which already exist and have the same checksum and size on the
 receiver are skipped.  This option can be quite slow.
 
-dit(bf(-a, --archive)) This is equivalent to -rlptDog. It is a quick way
+dit(bf(-a, --archive)) This is equivalent to -rlptDg. It is a quick way
 of saying I want recursion and want to preserve everything.
 
+Note: if the user launching rsync is root then the -o option (preserve
+uid) is also implied.
+
 dit(bf(-r, --recursive)) This tells rsync to copy directories recursively
 
 dit(bf(-R, --relative)) Use relative paths. This means that the full path
@@ -250,6 +328,11 @@ option all symbolic links are skipped.
 dit(bf(-L, --copy-links)) This tells rsync to treat symbolic links just
 like  ordinary files.
 
+dit(bf(--safe-links)) This tells rsync to ignore any symbolic links
+which point outside the destination tree. All absolute symlinks are
+also ignored. Using this option in conjunction with --relative may
+give unexpecetd results. 
+
 dit(bf(-H, --hard-links)) This tells rsync to recreate hard  links  on
 the  remote system  to  be the same as the local system. Without this
 option hard links are treated like regular files.
@@ -263,15 +346,25 @@ dit(bf(-W, --whole-file)) With this option the incremental rsync algorithm
 is  not used  and  the whole file is sent as-is instead. This may be
 useful when using rsync with a local machine.
 
+dit(bf(--partial)) By default rsync will delete any partially
+transferred file if the transfer is interrupted. In some circumstances
+it is more desirable to keep partially transferred files. Using the
+--partial option tells rsync to keep the partial file which should
+make a subsequent transfer of the rest of the file much faster.
+
 dit(bf(-p, --perms)) This option causes rsync to update the remote
 permissions to be the same as the local permissions.
 
 dit(bf(-o, --owner)) This option causes rsync to update the  remote  owner
 of the  file to be the same as the local owner. This is only available
-to the super-user.
+to the super-user.  Note that if the source system is a daemon using chroot,
+the --numeric-ids option is implied because the source system cannot get
+access to the user names.
 
 dit(bf(-g, --group)) This option causes rsync to update the  remote  group
-of the file to be the same as the local group.
+of the file to be the same as the local group.  Note that if the source
+system is a daemon using chroot, the --numeric-ids option is implied because
+the source system cannot get access to the group names.
 
 dit(bf(-D, --devices)) This option causes rsync to transfer character and
 block device information to the remote system to recreate these
@@ -286,6 +379,10 @@ instead it will just report the actions it would have taken.
 dit(bf(-S, --sparse)) Try to handle sparse files efficiently so they take
 up less space on the destination.
 
+NOTE: Don't use this option when the destination is a Solaris "tmpfs"
+filesystem. It doesn't seem to handle seeks over null regions
+correctly and ends up corrupting the files.
+
 dit(bf(-x, --one-file-system)) This tells rsync not to cross filesystem
 boundaries  when recursing.  This  is useful for transferring the
 contents of only one filesystem.
@@ -307,9 +404,11 @@ Still, it is probably easy to get burnt with this option.  The moral
 of the story is to use the -n option until you get used to the
 behavior of --delete.
 
-NOTE: It also may delete files on the destination if the sending side
-can't open them or stat them. This is a bug that hopefully will be
-fixed in a future release.
+If the sending side detects any IO errors then the deletion of any
+files at the destination will be automatically disabled. This is to
+prevent temporary filesystem failures (such as NFS errors) on the
+sending side causing a massive deletion of files on the
+destination. 
 
 dit(bf(--force)) This options tells rsync to delete directories even if
 they are not empty.  This applies to both the --delete option and to
@@ -334,23 +433,30 @@ environment variable.
 dit(bf(--rsync-path PATH)) Use this to specify the path to the copy of
 rsync on the remote machine. Useful when its not in your path.
 
-dit(bf(--exclude FILE)) This option allows you to selectively exclude
+dit(bf(--exclude pattern)) This option allows you to selectively exclude
 certain files from the list of files to be transferred. This is most
 useful in combination with a recursive transfer.
 
-The option FILE can either be a file name or a shell wildcard
-expression. If it is a directory name then rsync will not recurse into
-directories of that name.
-
 You may use as many --exclude options on the command line as you like
 to build up the list of files to exclude.
 
-If the filename is a single ! then the exclude list is reset.
+See the section of exclude patterns for information on the syntax of 
+this option.
 
 dit(bf(--exclude-from FILE)) This option is similar to the --exclude
 option, but instead it adds all filenames listed in the file FILE to
 the exclude list.
 
+dit(bf(--include pattern)) This option tells rsync to not exclude the
+specified pattern of filenames. This is useful as it allows you to
+build up quite complex exclude/include rules.
+
+See the section of exclude patterns for information on the syntax of 
+this option.
+
+dit(bf(--include-from FILE)) This specifies a list of include patterns
+from a file.
+
 dit(bf(-C, --cvs-exclude)) This is a useful shorthand for excluding a
 broad range of files that you often don't want to transfer between
 systems. It uses the same algorithm that CVS uses to determine if
@@ -375,7 +481,7 @@ dit(bf(--csum-length LENGTH)) By default the primary checksum used in
 rsync is a very strong 16 byte MD4 checksum. In most cases you will
 find that a truncated version of this checksum is quite efficient, and
 this will decrease the size of the checksum data sent over the link,
-making things faster.
+making things faster. 
 
 You can choose the number of bytes in the truncated checksum using the
 --csum-length option. Any value less than or equal to 16 is valid.
@@ -385,11 +491,26 @@ with an incorrect target file. The risk with a value of 16 is
 microscopic and can be safely ignored (the universe will probably end
 before it fails) but with smaller values the risk is higher.
 
-dit(bf(-T, --temp-dir DIR)) This options instructs rsync to use DIR as a
-scratch directory when creating a temporary copies of the files
+Current versions of rsync actually use an adaptive algorithm for the
+checksum length by default, using a 16 byte file checksum to determine
+if a 2nd pass is required with a longer block checksum. Only use this
+option if you have read the source code and know what you are doing.
+
+dit(bf(-T, --temp-dir DIR)) This option instructs rsync to use DIR as a
+scratch directory when creating temporary copies of the files
 transferred on the receiving side.  The default behavior is to create
 the temporary files in the receiving directory.
 
+dit(bf(--compare-dest DIR)) This option instructs rsync to use DIR as an
+additional directory to compare destination files against when doing
+transfers.  This is useful for doing transfers to a new destination while
+leaving existing files intact, and then doing a flash-cutover when all
+files have been successfully transfered (for example by moving directories
+around and removing the old directory).  This option increases the
+usefulness of --partial because partially transferred files will remain in
+the new temporary destination until they have a chance to be completed.
+If DIR is a relative path, it is relative to the destination directory.
+
 dit(bf(-z, --compress)) With this option, rsync compresses any data from
 the source file(s) which it sends to the destination machine.  This
 option is useful on slow links.  The compression method used is the
@@ -409,12 +530,13 @@ what ownership to give files. The special uid 0 and the special group
 0 and never mapped via user/group names even if the --numeric-ids
 option is not specified.
 
-If a user or group name does not exist on the destination system then
-the numeric id from the source system is used instead.
+If the source system is a daemon using chroot, or if a user or group name
+does not exist on the destination system, then the numeric id from the
+source system is used instead.
 
-dit(bf(--timeout)) This option allows you to set a maximum IO timeout in
-seconds. If no data is transferred for the specified time then rsync
-will exit. The default is 0, which means no timeout.
+dit(bf(--timeout=TIMEOUT)) This option allows you to set a maximum IO
+timeout in seconds. If no data is transferred for the specified time
+then rsync will exit. The default is 0, which means no timeout.
 
 dit(bf(--daemon)) This tells rsync that it is to run as a rsync
 daemon. If standard input is a socket then rsync will assume that it
@@ -431,6 +553,128 @@ specified.
 dit(bf(--port PORT)) This specifies an alternate TCP port number to use
 rather than the default port 873. 
 
+dit(bf(--log-format=FORMAT)) Normally rsync just logs filenames as
+they are transferred. This allows you to specify exactly what gets
+logged on a per file basis. The log format is specified using the same
+format conventions as the log format option in rsyncd.conf.
+
+dit(bf(--stats)) This tells rsync to print a verbose set of statistics
+on the file transfer, allowing you to tell how effective the rsync
+algorithm is for your data. This option only works in conjunction with
+the -v (verbose) option.
+
+dit(bf(--progress)) This option tells rsync to print information
+showing the progress of the transfer. This gives a bored user
+something to watch.
+
+enddit()
+
+manpagesection(EXCLUDE PATTERNS)
+
+The exclude and include patterns specified to rsync allow for flexible
+selection of what files to transfer and what files to skip.
+
+rsync build a ordered list of include/exclude options as specified on
+the command line. When a filename is encountered rsync then checks the
+name against each exclude/include pattern in turn. The first matching
+pattern is acted on. If it is an exclude pattern than that file is
+skipped. If it is an include pattern then that filename is not
+skipped. If no matching include/exclude pattern is found then the
+filename is not skipped.
+
+The patterns themselves can take several forms. The rules are:
+
+itemize(
+  it() if the pattern starts with a / then it is matched against the
+  start of the filename, otherwise it is matched against the end of
+  the filename. Thus /foo would match a file called foo
+  at the base of the tree whereas foo would match any file
+  called foo anywhere in the tree.
+
+  it() if the pattern ends with a / then it will only match a
+  directory, not a file, link or device.
+
+  it() if the pattern contains a wildcard character from the set
+  *?[ then regular expression matching is applied using the
+  normal shell filename matching rules. Otherwise a simple string
+  match is used.
+
+  it() if the pattern contains a / (not counting a trailing /) then it
+  is matched against the full filename, including any leading
+  directory. If the pattern doesn't contain a / then it is matched
+  only against the final component of the filename.
+
+  it() if the pattern starts with "+ " (a plus followed by a space)
+  then it is always considered a include pattern, even if specified as
+  part of an exclude option. The "+ " part is discarded before matching.
+
+  it() if the pattern starts with "- " (a minus followed by a space)
+  then it is always considered a exclude pattern, even if specified as
+  part of an include option. The "- " part is discarded before matching.
+
+  it() if the pattern is a single exclamation mark ! then the current
+  exclude list is reset, removing all previous exclude patterns.
+)
+
+The +/- rules are most useful in exclude lists, allowing you to have a
+single exclude list that contains both include and exclude options.
+
+Here are some examples:
+
+itemize(
+  it() --exclude "*.o" would exclude all filenames matching *.o
+  it() --exclude "/foo" would exclude a file in the base directory called foo
+  it() --exclude "foo/" would exclude any directory called foo
+  it() --include "*/" --include "*.c" --exclude "*" would include all 
+  directories and C source files.
+)
+
+manpagesection(DIAGNOSTICS)
+
+rsync occasinally produces error messages that may seem a little
+cryptic. The one that seems to cause the most confusion is "protocol
+version mismatch - is your shell clean?".
+
+This message is usually caused by your startup scripts or remote shell
+facility producing unwanted garbage on the stream that rsync is using
+for its transport. The way ot diagnose this problem is to run your
+remote shell like this:
+
+verb(
+   rsh remotehost /bin/true > out.dat
+)
+       
+then look at out.dat. If everything is working correctly then out.dat
+should be a zero length file. You you are getting the above error from
+rsync then you will probably find that out.dat contains some text or
+data. Look at the contents and try to work out what is producing
+it. The most common cause is incorrectly configued shell startup
+scripts (such as .cshrc or .profile) that contain output statements
+for non-interactive logins.
+
+manpagesection(ENVIRONMENT VARIABLES)
+
+startdit()
+
+dit(bf(CVSIGNORE)) The CVSIGNORE environment variable supplements any
+ignore patterns in .cvsignore files. See the --cvs-exclude option for
+more details.
+
+dit(bf(RSYNC_RSH)) The RSYNC_RSH environment variable allows you to
+override the default shell used as the transport for rsync. This can
+be used instead of the -e option.
+
+dit(bf(RSYNC_PASSWORD)) Setting RSYNC_PASSWORD to the required
+password allows you to run authenticated rsync connections to a rsync
+daemon without user intervention. Note that this does not supply a
+password to a shell transport such as ssh.
+
+dit(bf(USER) or bf(LOGNAME)) The USER or LOGNAME environment variables
+are used to determine the default username sent to a rsync server.
+
+dit(bf(HOME)) The HOME environment variable is used to find the users
+default .cvsignore file.
+
 enddit()
 
 manpagefiles()

rsyncd.conf.yo

@@ -91,6 +91,14 @@ support the "max connections" option. The rsync server uses record
 locking on this file to ensure that the max connections limit is not
 exceeded. The default is tt(/var/run/rsyncd.lock).
 
+dit(bf(log file)) The "log file" option tells the rsync daemon to log
+messages to that file rather than using syslog. This is particularly
+useful on systems (such as AIX) where syslog() doesn't work for
+chrooted programs.
+
+dit(bf(pid file)) The "pid file" option tells the rsync daemon to write
+its process id to that file.
+
 dit(bf(syslog facility)) The "syslog facility" option allows you to
 specify the syslog facility name to use when logging messages from the
 rsync server. You may use any standard syslog facility name which is
@@ -99,6 +107,46 @@ ftp, kern, lpr, mail, news, security, syslog, user, uucp, local0,
 local1, local2, local3, local4, local5, local6 and local7. The default
 is daemon. 
 
+dit(bf(transfer logging)) The "transfer logging" option enables per-file 
+logging of downloads and uploads in a format somewhat similar to that
+used by ftp daemons. If you want to customise the log formats look at
+log_send, log_recv and log_transfer in log.c
+
+dit(bf(log format)) The "log format" option allows you to specify the
+format used for logging file transfers when transfer logging is
+enabled. The format is a text string containing embedded single
+character escape sequences prefixed with a percent (%) character.
+
+The prefixes that are understood are:
+
+itemize(
+  it() %h for the remote host name
+  it() %a for the remote IP address
+  it() %l for the length of the file in bytes
+  it() %p for the process id of this rsync session
+  it() %o for the operation, which is either "send" or "recv"
+  it() %f for the filename
+  it() %P for the module path
+  it() %m for the module name
+  it() %t for the current time
+  it() %u for the authenticated username (or the null string)
+  it() %b for the number of bytes actually transferred 
+  it() %c when sending files this gives the number of checksum bytes
+    received for this file
+)
+
+The default log format is "%o %h [%a] %m (%u) %f %l"
+
+A perl script called rsyncstats to summarise this format is included
+in the rsync source code distribution.
+
+dit(bf(socket options)) This option can provide endless fun for people
+who like to tune their systems to the utmost degree. You can set all
+sorts of socket options which may make transfers faster (or
+slower!). Read the man page for the setsockopt() system call for
+details on some of the options you may be able to set. By default no
+special socket options are set.
+
 enddit()
 
 
@@ -116,9 +164,15 @@ that is displayed next to the module name when clients obtain a list
 of available modules. The default is no comment.
 
 dit(bf(path)) The "path" option specifies the directory in the servers
-filesystem to make available in this module. The rsync server will
-chroot to this path before starting the file transfer with the
-client. You must specify this option for each module in tt(/etc/rsyncd.conf).
+filesystem to make available in this module.  You must specify this option
+for each module in tt(/etc/rsyncd.conf).
+
+dit(bf(use chroot)) If "use chroot" is true, the rsync server will chroot
+to the "path" before starting the file transfer with the client.  This has
+the advantage of extra protection against possible implementation security
+holes, but it has the disadvantages of requiring super-user privileges and
+of not being able to follow symbolic links outside of the new root path.
+The default is to use chroot.
 
 dit(bf(read only)) The "read only" option determines whether clients
 will be able to upload files or not. If "read only" is true then any
@@ -218,7 +272,7 @@ connect.
 
 The default is no "hosts allow" option, which means all hosts can connect.
 
-dit(bf(hosts allow)) The "hosts deny" option allows you to specify a
+dit(bf(hosts deny)) The "hosts deny" option allows you to specify a
 list of patterns that are matched against a connecting clients
 hostname and IP address. If the pattern matches then the connection is
 rejected. See the "hosts allow" option for more information.
@@ -260,8 +314,10 @@ A more sophisticated example would be:
 
 uid = nobody nl()
 gid = nobody nl()
+use chroot = no nl()
 max connections = 4 nl()
 syslog facility = local5 nl()
+pid file = /etc/rsyncd.pid
 
 verb([ftp]
         path = /var/ftp/pub

sender.c

@@ -0,0 +1,228 @@
+/* 
+   Copyright (C) Andrew Tridgell 1996
+   Copyright (C) Paul Mackerras 1996
+   
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+   
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "rsync.h"
+
+extern int verbose;
+extern int remote_version;
+extern int csum_length;
+extern struct stats stats;
+extern int io_error;
+extern int dry_run;
+extern int am_server;
+
+
+/*
+  receive the checksums for a buffer
+  */
+static struct sum_struct *receive_sums(int f)
+{
+	struct sum_struct *s;
+	int i;
+	OFF_T offset = 0;
+
+	s = (struct sum_struct *)malloc(sizeof(*s));
+	if (!s) out_of_memory("receive_sums");
+
+	s->count = read_int(f);
+	s->n = read_int(f);
+	s->remainder = read_int(f);  
+	s->sums = NULL;
+
+	if (verbose > 3)
+		rprintf(FINFO,"count=%d n=%d rem=%d\n",
+			s->count,s->n,s->remainder);
+
+	if (s->count == 0) 
+		return(s);
+
+	s->sums = (struct sum_buf *)malloc(sizeof(s->sums[0])*s->count);
+	if (!s->sums) out_of_memory("receive_sums");
+
+	for (i=0;i<s->count;i++) {
+		s->sums[i].sum1 = read_int(f);
+		read_buf(f,s->sums[i].sum2,csum_length);
+
+		s->sums[i].offset = offset;
+		s->sums[i].i = i;
+
+		if (i == s->count-1 && s->remainder != 0) {
+			s->sums[i].len = s->remainder;
+		} else {
+			s->sums[i].len = s->n;
+		}
+		offset += s->sums[i].len;
+
+		if (verbose > 3)
+			rprintf(FINFO,"chunk[%d] len=%d offset=%d sum1=%08x\n",
+				i,s->sums[i].len,(int)s->sums[i].offset,s->sums[i].sum1);
+	}
+
+	s->flength = offset;
+
+	return s;
+}
+
+
+
+void send_files(struct file_list *flist,int f_out,int f_in)
+{ 
+	int fd;
+	struct sum_struct *s;
+	struct map_struct *buf;
+	STRUCT_STAT st;
+	char fname[MAXPATHLEN];  
+	int i;
+	struct file_struct *file;
+	int phase = 0;
+	extern struct stats stats;		
+	struct stats initial_stats;
+
+	if (verbose > 2)
+		rprintf(FINFO,"send_files starting\n");
+
+	setup_readbuffer(f_in);
+
+	while (1) {
+		int offset=0;
+
+		i = read_int(f_in);
+		if (i == -1) {
+			if (phase==0 && remote_version >= 13) {
+				phase++;
+				csum_length = SUM_LENGTH;
+				write_int(f_out,-1);
+				if (verbose > 2)
+					rprintf(FINFO,"send_files phase=%d\n",phase);
+				continue;
+			}
+			break;
+		}
+
+		if (i < 0 || i >= flist->count) {
+			rprintf(FERROR,"Invalid file index %d (count=%d)\n", 
+				i, flist->count);
+			exit_cleanup(RERR_PROTOCOL);
+		}
+
+		file = flist->files[i];
+
+		stats.num_transferred_files++;
+		stats.total_transferred_size += file->length;
+
+		fname[0] = 0;
+		if (file->basedir) {
+			strlcpy(fname,file->basedir,MAXPATHLEN-1);
+			if (strlen(fname) == MAXPATHLEN-1) {
+				io_error = 1;
+				rprintf(FERROR, "send_files failed on long-named directory %s\n",
+					fname);
+				return;
+			}
+			strlcat(fname,"/",MAXPATHLEN-1);
+			offset = strlen(file->basedir)+1;
+		}
+		strlcat(fname,f_name(file),MAXPATHLEN-strlen(fname));
+	  
+		if (verbose > 2) 
+			rprintf(FINFO,"send_files(%d,%s)\n",i,fname);
+	  
+		if (dry_run) {	
+			if (!am_server) {
+				log_transfer(file, fname+offset);
+			}
+			write_int(f_out,i);
+			continue;
+		}
+
+		initial_stats = stats;
+
+		s = receive_sums(f_in);
+		if (!s) {
+			io_error = 1;
+			rprintf(FERROR,"receive_sums failed\n");
+			return;
+		}
+	  
+		fd = open(fname,O_RDONLY);
+		if (fd == -1) {
+			io_error = 1;
+			rprintf(FERROR,"send_files failed to open %s: %s\n",
+				fname,strerror(errno));
+			free_sums(s);
+			continue;
+		}
+	  
+		/* map the local file */
+		if (do_fstat(fd,&st) != 0) {
+			io_error = 1;
+			rprintf(FERROR,"fstat failed : %s\n",strerror(errno));
+			free_sums(s);
+			close(fd);
+			return;
+		}
+	  
+		if (st.st_size > 0) {
+			buf = map_file(fd,st.st_size);
+		} else {
+			buf = NULL;
+		}
+	  
+		if (verbose > 2)
+			rprintf(FINFO,"send_files mapped %s of size %d\n",
+				fname,(int)st.st_size);
+
+		write_int(f_out,i);
+	  
+		write_int(f_out,s->count);
+		write_int(f_out,s->n);
+		write_int(f_out,s->remainder);
+	  
+		if (verbose > 2)
+			rprintf(FINFO,"calling match_sums %s\n",fname);
+	  
+		if (!am_server) {
+			log_transfer(file, fname+offset);
+		}
+	  
+		match_sums(f_out,s,buf,st.st_size);
+
+		log_send(file, &initial_stats);
+	  	  
+		if (buf) unmap_file(buf);
+		close(fd);
+	  
+		free_sums(s);
+	  
+		if (verbose > 2)
+			rprintf(FINFO,"sender finished %s\n",fname);
+	}
+
+	if (verbose > 2)
+		rprintf(FINFO,"send files finished\n");
+
+	match_report();
+
+	write_int(f_out,-1);
+}
+
+
+
+
+

socket.c

@@ -54,6 +54,8 @@ int open_socket_out(char *host, int port)
 		return -1;
 	}
 
+	set_nonblocking(res);
+
 	return res;
 }
 
@@ -81,7 +83,7 @@ static int open_socket_in(int type, int port)
 		return -1;
 	}
   
-	bzero((char *)&sock,sizeof(sock));
+	memset((char *)&sock,0,sizeof(sock));
 	memcpy((char *)&sock.sin_addr,(char *)hp->h_addr, hp->h_length);
 	sock.sin_port = htons(port);
 	sock.sin_family = hp->h_addrtype;
@@ -110,9 +112,9 @@ determine if a file descriptor is in fact a socket
 ****************************************************************************/
 int is_a_socket(int fd)
 {
-  int v,l;
-  l = sizeof(int);
-  return(getsockopt(fd, SOL_SOCKET, SO_TYPE, (char *)&v, &l) == 0);
+	int v,l;
+	l = sizeof(int);
+	return(getsockopt(fd, SOL_SOCKET, SO_TYPE, (char *)&v, &l) == 0);
 }
 
 
@@ -120,17 +122,15 @@ void start_accept_loop(int port, int (*fn)(int ))
 {
 	int s;
 
-	signal(SIGCHLD, SIG_IGN);
-
 	/* open an incoming socket */
 	s = open_socket_in(SOCK_STREAM, port);
 	if (s == -1)
-		exit(1);
+		exit_cleanup(RERR_SOCKETIO);
 
 	/* ready to listen */
 	if (listen(s, 5) == -1) {
 		close(s);
-		exit(1);
+		exit_cleanup(RERR_SOCKETIO);
 	}
 
 
@@ -155,9 +155,20 @@ void start_accept_loop(int port, int (*fn)(int ))
 
 		if (fd == -1) continue;
 
+		signal(SIGCHLD, SIG_IGN);
+
+		/* we shouldn't have any children left hanging around
+		   but I have had reports that on Digital Unix zombies
+		   are produced, so this ensures that they are reaped */
+#ifdef WNOHANG
+		waitpid(-1, NULL, WNOHANG);
+#endif
+
 		if (fork()==0) {
 			close(s);
 
+			set_nonblocking(fd);
+
 			_exit(fn(fd));
 		}
 
@@ -216,6 +227,8 @@ set user socket options
 void set_socket_options(int fd, char *options)
 {
 	char *tok;
+	if (!options || !*options) return;
+
 	options = strdup(options);
 	
 	if (!options) out_of_memory("set_socket_options");
@@ -272,27 +285,30 @@ become a daemon, discarding the controlling terminal
 ****************************************************************************/
 void become_daemon(void)
 {
-	if (fork())
+	int i;
+
+	if (fork()) {
 		_exit(0);
+	}
 
 	/* detach from the terminal */
 #ifdef HAVE_SETSID
 	setsid();
 #else
 #ifdef TIOCNOTTY
-	{
-		int i = open("/dev/tty", O_RDWR);
-		if (i >= 0) 
-			{
-				ioctl(i, (int) TIOCNOTTY, (char *)0);      
-				close(i);
-			}
+	i = open("/dev/tty", O_RDWR);
+	if (i >= 0) {
+		ioctl(i, (int) TIOCNOTTY, (char *)0);      
+		close(i);
 	}
 #endif /* TIOCNOTTY */
 #endif
-	close(0);
-	close(1);
-	close(2);
+	/* make sure that stdin, stdout an stderr don't stuff things
+           up (library functions, for example) */
+	for (i=0;i<3;i++) {
+		close(i); 
+		open("/dev/null", O_RDWR);
+	}
 }
 
 /*******************************************************************
@@ -304,13 +320,17 @@ char *client_addr(int fd)
 	struct sockaddr_in *sockin = (struct sockaddr_in *) (&sa);
 	int     length = sizeof(sa);
 	static char addr_buf[100];
+	static int initialised;
+
+	if (initialised) return addr_buf;
+
+	initialised = 1;
 
 	if (getpeername(fd, &sa, &length)) {
-		exit(1);
+		exit_cleanup(RERR_SOCKETIO);
 	}
-
+	
 	strlcpy(addr_buf,(char *)inet_ntoa(sockin->sin_addr), sizeof(addr_buf)-1);
-
 	return addr_buf;
 }
 
@@ -325,11 +345,18 @@ char *client_name(int fd)
 	int     length = sizeof(sa);
 	static char name_buf[100];
 	struct hostent *hp;
+	char **p;
+	char *def = "UNKNOWN";
+	static int initialised;
 
-	strcpy(name_buf,"UNKNOWN");
+	if (initialised) return name_buf;
+
+	initialised = 1;
+
+	strcpy(name_buf,def);
 
 	if (getpeername(fd, &sa, &length)) {
-		exit(1);
+		exit_cleanup(RERR_SOCKETIO);
 	}
 
 	/* Look up the remote host name. */
@@ -339,5 +366,23 @@ char *client_name(int fd)
 		strlcpy(name_buf,(char *)hp->h_name,sizeof(name_buf) - 1);
 	}
 
+
+	/* do a forward lookup as well to prevent spoofing */
+	hp = gethostbyname(name_buf);
+	if (!hp) {
+		strcpy(name_buf,def);
+		rprintf(FERROR,"reverse name lookup failed\n");
+	} else {
+		for (p=hp->h_addr_list;*p;p++) {
+			if (memcmp(*p, &sockin->sin_addr, hp->h_length) == 0) {
+				break;
+			}
+		}
+		if (!*p) {
+			strcpy(name_buf,def);
+			rprintf(FERROR,"reverse name lookup mismatch - spoofed address?\n");
+		} 
+	}
+
 	return name_buf;
 }

support/rsyncstats

@@ -0,0 +1,286 @@
+#! /usr/bin/perl
+# ---------------------------------------------------------------------------
+#
+# USAGE: rsyncstats <options>
+#
+# OPTIONS:
+#       -f <filename>   Use <filename> for the log file
+#       -h		include report on hourly traffic
+#       -d		include report on domain traffic
+#       -t		report on total traffic by section
+#       -D <domain>     report only on traffic from <domain>
+#       -l <depth>      Depth of path detail for sections
+#       -s <section>    Section to report on, For example: -s /pub will report
+#				only on paths under /pub
+#
+# This script parses the default logfile format produced by rsync when running
+# as a daemon with transfer logging enabled. It is derived from the xferstats
+# script that comes with wuftpd
+#
+# Andrew Tridgell, October 1998
+# rsync-bugs@samba.anu.edu.au
+#
+# ---------------------------------------------------------------------------
+
+# edit the next line to customize for your default log file
+$usage_file = "/var/adm/rsyncd.log";
+
+# Edit the following lines for default report settings.
+# Entries defined here will be over-ridden by the command line.
+
+$opt_h = 1; 
+$opt_d = 0;
+$opt_t = 1;
+$opt_l = 2;
+
+require 'getopts.pl';
+&Getopts('f:rahdD:l:s:');
+
+if ($opt_r) { $real = 1;}
+if ($opt_a) { $anon = 1;}
+if ($real == 0 && $anon == 0) { $anon = 1; }
+if ($opt_f) {$usage_file = $opt_f;}
+
+open (LOG,$usage_file) || die "Error opening usage log file: $usage_file\n";
+
+if ($opt_D) {print "Transfer Totals include the '$opt_D' domain only.\n";
+	     print "All other domains are filtered out for this report.\n\n";}
+
+if ($opt_s) {print "Transfer Totals include the '$opt_s' section only.\n";
+	     print "All other sections are filtered out for this report.\n\n";}
+
+line: while (<LOG>) {
+
+   @line = split;
+
+   $day = $line[0];
+   $time = $line[1];
+   $pid = $line[2];
+   $op = $line[3];
+   $host = $line[4];
+   $ip = $line[5];
+   $module = $line[6];
+   $user = $line[7];
+   $file = $line[8];
+   $bytes = $line[9];
+
+   next if ($#line != 9);
+
+   next if ($op != "send" && $op != "recv");
+
+   $daytime = $day;
+   $hour = substr($time,0,2); 
+
+   $file = $module . "/" . $file;
+
+   $file =~ s|//|/|mg;
+
+   @path = split(/\//, $file);
+
+   $pathkey = "";
+   for ($i=0; $i <= $#path && $i <= $opt_l;$i++) {
+	$pathkey = $pathkey . "/" . $path[$i];
+   }
+
+   next if (substr($pathkey,0,length("$opt_s")) ne "$opt_s");
+
+   $host =~ tr/A-Z/a-z/;
+
+   @address = split(/\./, $host);
+
+   $domain = $address[$#address];
+   if ( int($address[0]) > 0 || $#address < 2 )
+      { $domain = "unresolved"; }
+
+   if ($opt_D) {
+       next unless (substr($domain,0,length("$opt_D")) eq "$opt_D");
+   }
+
+
+#   printf ("c=%d day=%s bytes=%d file=%s path=%s\n", 
+#	   $#line, $daytime, $bytes, $file, $pathkey);
+
+   $xferfiles++;                                # total files sent
+   $xfertfiles++;                               # total files sent
+   $xferfiles{$daytime}++;                      # files per day
+   $groupfiles{$pathkey}++;                     # per-group accesses
+   $domainfiles{$domain}++;
+
+   $xferbytes{$daytime}   += $bytes;          # bytes per day
+   $domainbytes{$domain}  += $bytes;		# xmit bytes to domain
+   $xferbytes             += $bytes;          # total bytes sent
+   $groupbytes{$pathkey}  += $bytes;          # per-group bytes sent
+
+   $xfertfiles{$hour}++;                        # files per hour
+   $xfertbytes{$hour}     += $bytes;          # bytes per hour
+   $xfertbytes            += $bytes;          # total bytes sent
+}
+close LOG;
+
+@syslist = keys(systemfiles);
+@dates = sort datecompare keys(xferbytes);
+
+if ($xferfiles == 0) {die "There was no data to process.\n";}
+
+
+print "TOTALS FOR SUMMARY PERIOD ", $dates[0], " TO ", $dates[$#dates], "\n\n";
+printf ("Files Transmitted During Summary Period  %12.0f\n", $xferfiles);
+printf ("Bytes Transmitted During Summary Period  %12.0f\n", $xferbytes); 
+printf ("Systems Using Archives                   %12.0f\n\n", $#syslist+1);
+
+printf ("Average Files Transmitted Daily          %12.0f\n",
+   $xferfiles / ($#dates + 1));
+printf ("Average Bytes Transmitted Daily          %12.0f\n",
+   $xferbytes / ($#dates + 1));
+
+format top1 =
+
+Daily Transmission Statistics
+
+                 Number Of    Number of   Percent Of  Percent Of
+     Date        Files Sent   MB  Sent    Files Sent  Bytes Sent
+---------------  ----------  -----------  ----------  ----------
+.
+
+format line1 =
+@<<<<<<<<<<<<<<  @>>>>>>>>>  @>>>>>>>>>>  @>>>>>>>    @>>>>>>>  
+$date,           $nfiles,    $nbytes/(1024*1024), $pctfiles,  $pctbytes
+.
+
+$^ = top1;
+$~ = line1;
+
+foreach $date ( sort datecompare keys(xferbytes) ) {
+
+   $nfiles   = $xferfiles{$date};
+   $nbytes   = $xferbytes{$date};
+   $pctfiles = sprintf("%8.2f", 100*$xferfiles{$date} / $xferfiles);
+   $pctbytes = sprintf("%8.2f", 100*$xferbytes{$date} / $xferbytes);
+   write;
+}
+
+if ($opt_t) {
+format top2 =
+
+Total Transfers from each Archive Section (By bytes)
+
+                                                           - Percent -
+     Archive Section                   NFiles     MB      Files   Bytes
+------------------------------------- ------- ----------- ----- -------
+.
+
+format line2 =
+@<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< @>>>>>> @>>>>>>>>>> @>>>>   @>>>>
+$section,                 $files,    $bytes/(1024*1024),     $pctfiles, $pctbytes
+.
+
+$| = 1;
+$- = 0;
+$^ = top2;
+$~ = line2;
+
+foreach $section ( sort bytecompare keys(groupfiles) ) {
+
+   $files = $groupfiles{$section};
+   $bytes = $groupbytes{$section};
+   $pctbytes = sprintf("%8.2f", 100 * $groupbytes{$section} / $xferbytes);
+   $pctfiles = sprintf("%8.2f", 100 * $groupfiles{$section} / $xferfiles);
+   write;
+
+}
+
+if ( $xferfiles < 1 ) { $xferfiles = 1; }
+if ( $xferbytes < 1 ) { $xferbytes = 1; }
+}
+
+if ($opt_d) {
+format top3 =
+
+Total Transfer Amount By Domain
+
+             Number Of    Number of    Percent Of  Percent Of
+Domain Name  Files Sent    MB Sent     Files Sent  Bytes Sent
+-----------  ----------  ------------  ----------  ----------
+.
+
+format line3 =
+@<<<<<<<<<<  @>>>>>>>>>  @>>>>>>>>>>>  @>>>>>>>    @>>>>>>>  
+$domain,     $files,     $bytes/(1024*1024), $pctfiles,  $pctbytes
+.
+
+$- = 0;
+$^ = top3;
+$~ = line3;
+
+foreach $domain ( sort domnamcompare keys(domainfiles) ) {
+
+   if ( $domainsecs{$domain} < 1 ) { $domainsecs{$domain} = 1; }
+
+   $files = $domainfiles{$domain};
+   $bytes = $domainbytes{$domain};
+   $pctfiles = sprintf("%8.2f", 100 * $domainfiles{$domain} / $xferfiles);
+   $pctbytes = sprintf("%8.2f", 100 * $domainbytes{$domain} / $xferbytes);
+   write;
+
+}
+
+}
+
+if ($opt_h) {
+
+format top8 =
+
+Hourly Transmission Statistics
+
+                 Number Of    Number of   Percent Of  Percent Of
+     Time        Files Sent    MB  Sent   Files Sent  Bytes Sent
+---------------  ----------  -----------  ----------  ----------
+.
+
+format line8 =
+@<<<<<<<<<<<<<<  @>>>>>>>>>  @>>>>>>>>>>  @>>>>>>>    @>>>>>>>  
+$hour,           $nfiles,    $nbytes/(1024*1024), $pctfiles,  $pctbytes
+.
+
+
+$| = 1;
+$- = 0;
+$^ = top8;
+$~ = line8;
+
+foreach $hour ( sort keys(xfertbytes) ) {
+
+   $nfiles   = $xfertfiles{$hour};
+   $nbytes   = $xfertbytes{$hour};
+   $pctfiles = sprintf("%8.2f", 100*$xfertfiles{$hour} / $xferfiles);
+   $pctbytes = sprintf("%8.2f", 100*$xfertbytes{$hour} / $xferbytes);
+   write;
+}
+}
+exit(0);
+
+sub datecompare {
+    $a gt $b;
+}
+
+sub domnamcompare {
+
+   $sdiff = length($a) - length($b);
+   ($sdiff < 0) ? -1 : ($sdiff > 0) ? 1 : ($a lt $b) ? -1 : ($a gt $b) ? 1 : 0;
+
+}
+
+sub bytecompare {
+
+   $bdiff = $groupbytes{$b} - $groupbytes{$a};
+   ($bdiff < 0) ? -1 : ($bdiff > 0) ? 1 : ($a lt $b) ? -1 : ($a gt $b) ? 1 : 0;
+
+}
+
+sub faccompare {
+
+   $fdiff = $fac{$b} - $fac{$a};
+   ($fdiff < 0) ? -1 : ($fdiff > 0) ? 1 : ($a lt $b) ? -1 : ($a gt $b) ? 1 : 0;
+
+}
+

syscall.c

@@ -149,6 +149,17 @@ OFF_T do_lseek(int fd, OFF_T offset, int whence)
 #endif
 }
 
+#ifdef USE_MMAP
+void *do_mmap(void *start, int len, int prot, int flags, int fd, OFF_T offset)
+{
+#if HAVE_OFF64_T
+	return mmap64(start, len, prot, flags, fd, offset);
+#else
+	return mmap(start, len, prot, flags, fd, offset);
+#endif
+}
+#endif
+
 char *d_name(struct dirent *di)
 {
 #if HAVE_BROKEN_READDIR

test.sh

@@ -10,6 +10,14 @@
 #
 #
 
+cat <<EOF
+
+This set of tests is not completely portable. It is intended for developers
+not for end users. You may experience failures on some platforms that
+do not indicate a problem with rsync.
+
+EOF
+
 export PATH=.:$PATH
 TMP=/tmp/rsync-test.$$
 FROM=${TMP}/from
@@ -98,14 +106,21 @@ cp ${FROM}/${F1} ${TO}/ThisShouldGo
 checkit "rsync --delete -avH ${FROM}/ ${TO}" ${FROM}/ ${TO} \
   5 " --delete"
 
+LONGDIR=${FROM}/This-is-a-directory-with-a-stupidly-long-name-created-in-an-attempt-to-provoke-an-error-found-in-2.0.11-that-should-hopefully-never-appear-again-if-this-test-does-its-job/This-is-a-directory-with-a-stupidly-long-name-created-in-an-attempt-to-provoke-an-error-found-in-2.0.11-that-should-hopefully-never-appear-again-if-this-test-does-its-job/This-is-a-directory-with-a-stupidly-long-name-created-in-an-attempt-to-provoke-an-error-found-in-2.0.11-that-should-hopefully-never-appear-again-if-this-test-does-its-job
+mkdir -p ${LONGDIR}
+date > ${LONGDIR}/1
+ls -la / > ${LONGDIR}/2
+checkit "rsync --delete -avH ${FROM}/ ${TO}" ${FROM}/ ${TO} \
+  6 "long paths"
+
 if type ssh >/dev/null ; then
 rm -rf ${TO}
   checkit "rsync -avH -e ssh ${FROM}/ localhost:${TO}" ${FROM}/ ${TO} \
-    6 "ssh: basic test"
+    7 "ssh: basic test"
 
   mv ${TO}/${F1} ${TO}/ThisShouldGo
   checkit "rsync --delete -avH -e ssh ${FROM}/ localhost:${TO}" ${FROM}/ ${TO}\
-    7 "ssh: renamed file"
+    8 "ssh: renamed file"
 else
   echo ""
   echo "**** Skipping SSH tests because ssh is not in the path ****"
@@ -113,4 +128,3 @@ else
 fi
 
 checkforlogs ${LOG}.?
-

token.c

@@ -18,7 +18,7 @@
 */
 
 #include "rsync.h"
-#include "lib/zlib.h"
+#include "zlib/zlib.h"
 
 extern int do_compression;
 
@@ -26,60 +26,49 @@ extern int do_compression;
 /* non-compressing recv token */
 static int simple_recv_token(int f,char **data)
 {
-  static int residue;
-  static char *buf;
-  int n;
+	static int residue;
+	static char *buf;
+	int n;
 
-  if (!buf) {
-    buf = (char *)malloc(CHUNK_SIZE);
-    if (!buf) out_of_memory("simple_recv_token");
-  }
+	if (!buf) {
+		buf = (char *)malloc(CHUNK_SIZE);
+		if (!buf) out_of_memory("simple_recv_token");
+	}
 
+	if (residue == 0) {
+		int i = read_int(f);
+		if (i <= 0) return i;
+		residue = i;
+	}
 
-  if (residue == 0) {
-    int i = read_int(f);
-    if (i <= 0) return i;
-    residue = i;
-  }
-
-  *data = buf;
-  n = MIN(CHUNK_SIZE,residue);
-  residue -= n;
-  read_buf(f,buf,n);
-  return n;
+	*data = buf;
+	n = MIN(CHUNK_SIZE,residue);
+	residue -= n;
+	read_buf(f,buf,n);
+	return n;
 }
 
 
 /* non-compressing send token */
 static void simple_send_token(int f,int token,
-			      struct map_struct *buf,int offset,int n)
+			      struct map_struct *buf,OFF_T offset,int n)
 {
-  if (n > 0) {
-    int l = 0;
-    while (l < n) {
-      int n1 = MIN(CHUNK_SIZE,n-l);
-      write_int(f,n1);
-      write_buf(f,map_ptr(buf,offset+l,n1),n1);
-      l += n1;
-    }
-  }
-  write_int(f,-(token+1));
+	if (n > 0) {
+		int l = 0;
+		while (l < n) {
+			int n1 = MIN(CHUNK_SIZE,n-l);
+			write_int(f,n1);
+			write_buf(f,map_ptr(buf,offset+l,n1),n1);
+			l += n1;
+		}
+	}
+	/* a -2 token means to send data only and no token */
+	if (token != -2) {
+		write_int(f,-(token+1));
+	}
 }
 
 
-/* Memory allocation/freeing routines, called by zlib stuff. */
-static void *
-z_alloc(void *opaque, uInt items, uInt size)
-{
-    return malloc(items * size);
-}
-
-static void
-z_free(void *opaque, void *adrs, uInt nbytes)
-{
-    free(adrs);
-}
-
 /* Flag bytes in compressed stream are encoded as follows: */
 #define END_FLAG	0	/* that's all folks */
 #define TOKEN_LONG	0x20	/* followed by 32-bit token number */
@@ -104,102 +93,131 @@ static char *obuf;
 /* Send a deflated token */
 static void
 send_deflated_token(int f, int token,
-		    struct map_struct *buf, int offset, int nb, int toklen)
+		    struct map_struct *buf, OFF_T offset, int nb, int toklen)
 {
-    int n, r;
-    static int init_done;
+	int n, r;
+	static int init_done, flush_pending;
 
-    if (last_token == -1) {
-	/* initialization */
-	if (!init_done) {
-	    tx_strm.next_in = NULL;
-	    tx_strm.zalloc = z_alloc;
-	    tx_strm.zfree = z_free;
-	    if (deflateInit2(&tx_strm, Z_DEFAULT_COMPRESSION, 8,
-			     -15, 8, Z_DEFAULT_STRATEGY) != Z_OK) {
-		rprintf(FERROR, "compression init failed\n");
-		exit_cleanup(1);
-	    }
-	    if ((obuf = malloc(MAX_DATA_COUNT+2)) == NULL)
-		out_of_memory("send_deflated_token");
-	    init_done = 1;
-	} else
-	    deflateReset(&tx_strm);
-	run_start = token;
-	last_run_end = 0;
+	if (last_token == -1) {
+		/* initialization */
+		if (!init_done) {
+			tx_strm.next_in = NULL;
+			tx_strm.zalloc = NULL;
+			tx_strm.zfree = NULL;
+			if (deflateInit2(&tx_strm, Z_DEFAULT_COMPRESSION,
+					 Z_DEFLATED, -15, 8,
+					 Z_DEFAULT_STRATEGY) != Z_OK) {
+				rprintf(FERROR, "compression init failed\n");
+				exit_cleanup(RERR_STREAMIO);
+			}
+			if ((obuf = malloc(MAX_DATA_COUNT+2)) == NULL)
+				out_of_memory("send_deflated_token");
+			init_done = 1;
+		} else
+			deflateReset(&tx_strm);
+		last_run_end = 0;
+		run_start = token;
+		flush_pending = 0;
 
-    } else if (nb != 0 || token != last_token + 1
-	       || token >= run_start + 65536) {
-	/* output previous run */
-	r = run_start - last_run_end;
-	n = last_token - run_start;
-	if (r >= 0 && r <= 63) {
-	    write_byte(f, (n==0? TOKEN_REL: TOKENRUN_REL) + r);
-	} else {
-	    write_byte(f, (n==0? TOKEN_LONG: TOKENRUN_LONG));
-	    write_int(f, run_start);
-	}
-	if (n != 0) {
-	    write_byte(f, n);
-	    write_byte(f, n >> 8);
-	}
-	last_run_end = last_token;
-	run_start = token;
-    }
+	} else if (last_token == -2) {
+		run_start = token;
 
-    last_token = token;
-
-    if (nb != 0) {
-	/* deflate the data starting at offset */
-	tx_strm.avail_in = 0;
-	tx_strm.avail_out = 0;
-	do {
-	    if (tx_strm.avail_in == 0 && nb != 0) {
-		/* give it some more input */
-		n = MIN(nb, CHUNK_SIZE);
-		tx_strm.next_in = (Bytef *)map_ptr(buf, offset, n);
-		tx_strm.avail_in = n;
-		nb -= n;
-		offset += n;
-	    }
-	    if (tx_strm.avail_out == 0) {
-		tx_strm.next_out = (Bytef *)(obuf + 2);
-		tx_strm.avail_out = MAX_DATA_COUNT;
-	    }
-	    r = deflate(&tx_strm, nb? Z_NO_FLUSH: Z_PACKET_FLUSH);
-	    if (r != Z_OK) {
-		rprintf(FERROR, "deflate returned %d\n", r);
-		exit_cleanup(1);
-	    }
-	    if (nb == 0 || tx_strm.avail_out == 0) {
-		n = MAX_DATA_COUNT - tx_strm.avail_out;
-		if (n > 0) {
-		    obuf[0] = DEFLATED_DATA + (n >> 8);
-		    obuf[1] = n;
-		    write_buf(f, obuf, n+2);
+	} else if (nb != 0 || token != last_token + 1
+		   || token >= run_start + 65536) {
+		/* output previous run */
+		r = run_start - last_run_end;
+		n = last_token - run_start;
+		if (r >= 0 && r <= 63) {
+			write_byte(f, (n==0? TOKEN_REL: TOKENRUN_REL) + r);
+		} else {
+			write_byte(f, (n==0? TOKEN_LONG: TOKENRUN_LONG));
+			write_int(f, run_start);
 		}
-	    }
-	} while (nb != 0 || tx_strm.avail_out == 0);
-    }
-
-    if (token != -1) {
-	/* add the data in the current block to the compressor's
-	   history and hash table */
-	tx_strm.next_in = (Bytef *)map_ptr(buf, offset, toklen);
-	tx_strm.avail_in = toklen;
-	tx_strm.next_out = NULL;
-	tx_strm.avail_out = 2 * toklen;
-	r = deflate(&tx_strm, Z_INSERT_ONLY);
-	if (r != Z_OK || tx_strm.avail_in != 0) {
-	    rprintf(FERROR, "deflate on token returned %d (%d bytes left)\n",
-		    r, tx_strm.avail_in);
-	    exit_cleanup(1);
+		if (n != 0) {
+			write_byte(f, n);
+			write_byte(f, n >> 8);
+		}
+		last_run_end = last_token;
+		run_start = token;
 	}
 
-    } else {
-	/* end of file - clean up */
-	write_byte(f, END_FLAG);
-    }
+	last_token = token;
+
+	if (nb != 0 || flush_pending) {
+		/* deflate the data starting at offset */
+		int flush = Z_NO_FLUSH;
+		tx_strm.avail_in = 0;
+		tx_strm.avail_out = 0;
+		do {
+			if (tx_strm.avail_in == 0 && nb != 0) {
+				/* give it some more input */
+				n = MIN(nb, CHUNK_SIZE);
+				tx_strm.next_in = (Bytef *)
+					map_ptr(buf, offset, n);
+				tx_strm.avail_in = n;
+				nb -= n;
+				offset += n;
+			}
+			if (tx_strm.avail_out == 0) {
+				tx_strm.next_out = (Bytef *)(obuf + 2);
+				tx_strm.avail_out = MAX_DATA_COUNT;
+				if (flush != Z_NO_FLUSH) {
+					/*
+					 * We left the last 4 bytes in the
+					 * buffer, in case they are the
+					 * last 4.  Move them to the front.
+					 */
+					memcpy(tx_strm.next_out,
+					       obuf+MAX_DATA_COUNT-2, 4);
+					tx_strm.next_out += 4;
+					tx_strm.avail_out -= 4;
+				}
+			}
+			if (nb == 0 && token != -2)
+				flush = Z_SYNC_FLUSH;
+			r = deflate(&tx_strm, flush);
+			if (r != Z_OK) {
+				rprintf(FERROR, "deflate returned %d\n", r);
+				exit_cleanup(RERR_STREAMIO);
+			}
+			if (nb == 0 || tx_strm.avail_out == 0) {
+				n = MAX_DATA_COUNT - tx_strm.avail_out;
+				if (flush != Z_NO_FLUSH) {
+					/*
+					 * We have to trim off the last 4
+					 * bytes of output when flushing
+					 * (they are just 0, 0, ff, ff).
+					 */
+					n -= 4;
+				}
+				if (n > 0) {
+					obuf[0] = DEFLATED_DATA + (n >> 8);
+					obuf[1] = n;
+					write_buf(f, obuf, n+2);
+				}
+			}
+		} while (nb != 0 || tx_strm.avail_out == 0);
+		flush_pending = token == -2;
+	}
+
+	if (token == -1) {
+		/* end of file - clean up */
+		write_byte(f, END_FLAG);
+
+	} else if (token != -2) {
+		/* add the data in the current block to the compressor's
+		   history and hash table */
+		tx_strm.next_in = (Bytef *) map_ptr(buf, offset, toklen);
+		tx_strm.avail_in = toklen;
+		tx_strm.next_out = (Bytef *) obuf;
+		tx_strm.avail_out = MAX_DATA_COUNT;
+		r = deflate(&tx_strm, Z_INSERT_ONLY);
+		if (r != Z_OK || tx_strm.avail_in != 0) {
+			rprintf(FERROR, "deflate on token returned %d (%d bytes left)\n",
+				r, tx_strm.avail_in);
+			exit_cleanup(RERR_STREAMIO);
+		}
+	}
 }
 
 
@@ -219,131 +237,171 @@ static int rx_run;
 static int
 recv_deflated_token(int f, char **data)
 {
-    int n, r, flag;
-    static int init_done;
-    static int saved_flag;
+	int n, r, flag;
+	static int init_done;
+	static int saved_flag;
 
-    for (;;) {
-	switch (recv_state) {
-	case r_init:
-	    if (!init_done) {
-		rx_strm.next_out = NULL;
-		rx_strm.zalloc = z_alloc;
-		rx_strm.zfree = z_free;
-		if (inflateInit2(&rx_strm, -15) != Z_OK) {
-		    rprintf(FERROR, "inflate init failed\n");
-		    exit_cleanup(1);
-		}
-		if ((cbuf = malloc(MAX_DATA_COUNT)) == NULL
-		    || (dbuf = malloc(CHUNK_SIZE)) == NULL)
-		    out_of_memory("recv_deflated_token");
-		init_done = 1;
-	    } else {
-		inflateReset(&rx_strm);
-	    }
-	    recv_state = r_idle;
-	    rx_token = 0;
-	    break;
-	    
-	case r_idle:
-	case r_inflated:
-	    if (saved_flag) {
-		flag = saved_flag & 0xff;
-		saved_flag = 0;
-	    } else
-		flag = read_byte(f);
-	    if ((flag & 0xC0) == DEFLATED_DATA) {
-		n = ((flag & 0x3f) << 8) + read_byte(f);
-		read_buf(f, cbuf, n);
-		rx_strm.next_in = (Bytef *)cbuf;
-		rx_strm.avail_in = n;
-		recv_state = r_inflating;
-		break;
-	    }
-	    if (recv_state == r_inflated) {
-		/* check previous inflated stuff ended correctly */
-		rx_strm.avail_in = 0;
-		rx_strm.next_out = (Bytef *)dbuf;
-		rx_strm.avail_out = CHUNK_SIZE;
-		r = inflate(&rx_strm, Z_PACKET_FLUSH);
-		n = CHUNK_SIZE - rx_strm.avail_out;
-		if (r != Z_OK) {
-		    rprintf(FERROR, "inflate flush returned %d (%d bytes)\n",
-			    r, n);
-		    exit_cleanup(1);
-		}
-		if (n != 0) {
-		    /* have to return some more data and
-		       save the flag for later. */
-		    saved_flag = flag + 0x10000;
-		    if (rx_strm.avail_out != 0)
+	for (;;) {
+		switch (recv_state) {
+		case r_init:
+			if (!init_done) {
+				rx_strm.next_out = NULL;
+				rx_strm.zalloc = NULL;
+				rx_strm.zfree = NULL;
+				if (inflateInit2(&rx_strm, -15) != Z_OK) {
+					rprintf(FERROR, "inflate init failed\n");
+					exit_cleanup(RERR_STREAMIO);
+				}
+				if ((cbuf = malloc(MAX_DATA_COUNT)) == NULL
+				    || (dbuf = malloc(CHUNK_SIZE)) == NULL)
+					out_of_memory("recv_deflated_token");
+				init_done = 1;
+			} else {
+				inflateReset(&rx_strm);
+			}
 			recv_state = r_idle;
-		    *data = dbuf;
-		    return n;
+			rx_token = 0;
+			break;
+
+		case r_idle:
+		case r_inflated:
+			if (saved_flag) {
+				flag = saved_flag & 0xff;
+				saved_flag = 0;
+			} else
+				flag = read_byte(f);
+			if ((flag & 0xC0) == DEFLATED_DATA) {
+				n = ((flag & 0x3f) << 8) + read_byte(f);
+				read_buf(f, cbuf, n);
+				rx_strm.next_in = (Bytef *)cbuf;
+				rx_strm.avail_in = n;
+				recv_state = r_inflating;
+				break;
+			}
+			if (recv_state == r_inflated) {
+				/* check previous inflated stuff ended correctly */
+				rx_strm.avail_in = 0;
+				rx_strm.next_out = (Bytef *)dbuf;
+				rx_strm.avail_out = CHUNK_SIZE;
+				r = inflate(&rx_strm, Z_SYNC_FLUSH);
+				n = CHUNK_SIZE - rx_strm.avail_out;
+				/*
+				 * Z_BUF_ERROR just means no progress was
+				 * made, i.e. the decompressor didn't have
+				 * any pending output for us.
+				 */
+				if (r != Z_OK && r != Z_BUF_ERROR) {
+					rprintf(FERROR, "inflate flush returned %d (%d bytes)\n",
+						r, n);
+					exit_cleanup(RERR_STREAMIO);
+				}
+				if (n != 0 && r != Z_BUF_ERROR) {
+					/* have to return some more data and
+					   save the flag for later. */
+					saved_flag = flag + 0x10000;
+					*data = dbuf;
+					return n;
+				}
+				/*
+				 * At this point the decompressor should
+				 * be expecting to see the 0, 0, ff, ff bytes.
+				 */
+				if (!inflateSyncPoint(&rx_strm)) {
+					rprintf(FERROR, "decompressor lost sync!\n");
+					exit_cleanup(RERR_STREAMIO);
+				}
+				rx_strm.avail_in = 4;
+				rx_strm.next_in = (Bytef *)cbuf;
+				cbuf[0] = cbuf[1] = 0;
+				cbuf[2] = cbuf[3] = 0xff;
+				inflate(&rx_strm, Z_SYNC_FLUSH);
+				recv_state = r_idle;
+			}
+			if (flag == END_FLAG) {
+				/* that's all folks */
+				recv_state = r_init;
+				return 0;
+			}
+
+			/* here we have a token of some kind */
+			if (flag & TOKEN_REL) {
+				rx_token += flag & 0x3f;
+				flag >>= 6;
+			} else
+				rx_token = read_int(f);
+			if (flag & 1) {
+				rx_run = read_byte(f);
+				rx_run += read_byte(f) << 8;
+				recv_state = r_running;
+			}
+			return -1 - rx_token;
+
+		case r_inflating:
+			rx_strm.next_out = (Bytef *)dbuf;
+			rx_strm.avail_out = CHUNK_SIZE;
+			r = inflate(&rx_strm, Z_NO_FLUSH);
+			n = CHUNK_SIZE - rx_strm.avail_out;
+			if (r != Z_OK) {
+				rprintf(FERROR, "inflate returned %d (%d bytes)\n", r, n);
+				exit_cleanup(RERR_STREAMIO);
+			}
+			if (rx_strm.avail_in == 0)
+				recv_state = r_inflated;
+			if (n != 0) {
+				*data = dbuf;
+				return n;
+			}
+			break;
+
+		case r_running:
+			++rx_token;
+			if (--rx_run == 0)
+				recv_state = r_idle;
+			return -1 - rx_token;
 		}
-		recv_state = r_idle;
-	    }
-	    if (flag == END_FLAG) {
-		/* that's all folks */
-		recv_state = r_init;
-		return 0;
-	    }
-
-	    /* here we have a token of some kind */
-	    if (flag & TOKEN_REL) {
-		rx_token += flag & 0x3f;
-		flag >>= 6;
-	    } else
-		rx_token = read_int(f);
-	    if (flag & 1) {
-		rx_run = read_byte(f);
-		rx_run += read_byte(f) << 8;
-		recv_state = r_running;
-	    }
-	    return -1 - rx_token;
-
-	case r_inflating:
-	    rx_strm.next_out = (Bytef *)dbuf;
-	    rx_strm.avail_out = CHUNK_SIZE;
-	    r = inflate(&rx_strm, Z_NO_FLUSH);
-	    n = CHUNK_SIZE - rx_strm.avail_out;
-	    if (r != Z_OK) {
-		rprintf(FERROR, "inflate returned %d (%d bytes)\n", r, n);
-		exit_cleanup(1);
-	    }
-	    if (rx_strm.avail_in == 0)
-		recv_state = r_inflated;
-	    if (n != 0) {
-		*data = dbuf;
-		return n;
-	    }
-	    break;
-
-	case r_running:
-	    ++rx_token;
-	    if (--rx_run == 0)
-		recv_state = r_idle;
-	    return -1 - rx_token;
 	}
-    }
 }
 
 /*
  * put the data corresponding to a token that we've just returned
  * from recv_deflated_token into the decompressor's history buffer.
  */
-void
-see_deflate_token(char *buf, int len)
+static void see_deflate_token(char *buf, int len)
 {
-    int r;
+	int r, blklen;
+	unsigned char hdr[5];
 
-    rx_strm.next_in = (Bytef *)buf;
-    rx_strm.avail_in = len;
-    r = inflateIncomp(&rx_strm);
-    if (r != Z_OK) {
-	rprintf(FERROR, "inflateIncomp returned %d\n", r);
-	exit_cleanup(1);
-    }
+	rx_strm.avail_in = 0;
+	blklen = 0;
+	hdr[0] = 0;
+	do {
+		if (rx_strm.avail_in == 0 && len != 0) {
+			if (blklen == 0) {
+				/* Give it a fake stored-block header. */
+				rx_strm.next_in = (Bytef *)hdr;
+				rx_strm.avail_in = 5;
+				blklen = len;
+				if (blklen > 0xffff)
+					blklen = 0xffff;
+				hdr[1] = blklen;
+				hdr[2] = blklen >> 8;
+				hdr[3] = ~hdr[1];
+				hdr[4] = ~hdr[2];
+			} else {
+				rx_strm.next_in = (Bytef *)buf;
+				rx_strm.avail_in = blklen;
+				len -= blklen;
+				blklen = 0;
+			}
+		}
+		rx_strm.next_out = (Bytef *)dbuf;
+		rx_strm.avail_out = CHUNK_SIZE;
+		r = inflate(&rx_strm, Z_SYNC_FLUSH);
+		if (r != Z_OK) {
+			rprintf(FERROR, "inflate (token) returned %d\n", r);
+			exit_cleanup(RERR_STREAMIO);
+		}
+	} while (len || rx_strm.avail_out == 0);
 }
 
 /*
@@ -351,14 +409,14 @@ see_deflate_token(char *buf, int len)
  * If token == -1 then we have reached EOF 
  * If n == 0 then don't send a buffer
  */
-void send_token(int f,int token,struct map_struct *buf,int offset,
+void send_token(int f,int token,struct map_struct *buf,OFF_T offset,
 		int n,int toklen)
 {
-  if (!do_compression) {
-    simple_send_token(f,token,buf,offset,n);
-  } else {
-    send_deflated_token(f, token, buf, offset, n, toklen);
-  }
+	if (!do_compression) {
+		simple_send_token(f,token,buf,offset,n);
+	} else {
+		send_deflated_token(f, token, buf, offset, n, toklen);
+	}
 }
 
 
@@ -370,14 +428,14 @@ void send_token(int f,int token,struct map_struct *buf,int offset,
  */
 int recv_token(int f,char **data)
 {
-  int tok;
+	int tok;
 
-  if (!do_compression) {
-    tok = simple_recv_token(f,data);
-  } else {
-    tok = recv_deflated_token(f, data);
-  }
-  return tok;
+	if (!do_compression) {
+		tok = simple_recv_token(f,data);
+	} else {
+		tok = recv_deflated_token(f, data);
+	}
+	return tok;
 }
 
 /*
@@ -385,6 +443,6 @@ int recv_token(int f,char **data)
  */
 void see_token(char *data, int toklen)
 {
-    if (do_compression)
-	see_deflate_token(data, toklen);
+	if (do_compression)
+		see_deflate_token(data, toklen);
 }

util.c

@@ -24,91 +24,30 @@
   */
 #include "rsync.h"
 
-int num_waiting(int fd)
+/****************************************************************************
+Set a fd into nonblocking mode. Uses POSIX O_NONBLOCK if available,
+else
+if SYSV use O_NDELAY
+if BSD use FNDELAY
+****************************************************************************/
+int set_nonblocking(int fd)
 {
-  int len=0;
-  ioctl(fd,FIONREAD,&len);
-  return(len);
-}
-
-
-struct map_struct *map_file(int fd,OFF_T len)
-{
-  struct map_struct *ret;
-  ret = (struct map_struct *)malloc(sizeof(*ret));
-  if (!ret) out_of_memory("map_file");
-
-  ret->map = NULL;
-  ret->fd = fd;
-  ret->size = len;
-  ret->p = NULL;
-  ret->p_size = 0;
-  ret->p_offset = 0;
-  ret->p_len = 0;
-
-#ifdef HAVE_MMAP
-  if (len < MAX_MAP_SIZE) {
-	  ret->map = (char *)mmap(NULL,len,PROT_READ,MAP_SHARED,fd,0);
-	  if (ret->map == (char *)-1) {
-		  ret->map = NULL;
-	  }
-  }
+	int val;
+#ifdef O_NONBLOCK
+#define FLAG_TO_SET O_NONBLOCK
+#else
+#ifdef SYSV
+#define FLAG_TO_SET O_NDELAY
+#else /* BSD */
+#define FLAG_TO_SET FNDELAY
 #endif
-  return ret;
-}
-
-
-char *map_ptr(struct map_struct *map,OFF_T offset,int len)
-{
-  int nread = -2;
-
-  if (map->map)
-    return map->map+offset;
-
-  if (len == 0) 
-    return NULL;
-
-  if (len > (map->size-offset))
-      len = map->size-offset;
-
-  if (offset >= map->p_offset && 
-      offset+len <= map->p_offset+map->p_len) {
-    return (map->p + (offset - map->p_offset));
-  }
-
-  len = MAX(len,CHUNK_SIZE);
-  if (len > (map->size-offset))
-      len = map->size-offset;
-
-  if (len > map->p_size) {
-    if (map->p) free(map->p);
-    map->p = (char *)malloc(len);
-    if (!map->p) out_of_memory("map_ptr");
-    map->p_size = len;
-  }
-
-  if (do_lseek(map->fd,offset,SEEK_SET) != offset ||
-      (nread=read(map->fd,map->p,len)) != len) {
-	  rprintf(FERROR,"EOF in map_ptr! (offset=%d len=%d nread=%d errno=%d)\n",
-		  (int)offset, len, nread, errno);
-	  exit_cleanup(1);
-  }
-
-  map->p_offset = offset;
-  map->p_len = len;
-
-  return map->p; 
-}
-
-
-void unmap_file(struct map_struct *map)
-{
-#ifdef HAVE_MMAP
-  if (map->map)
-    munmap(map->map,map->size);
 #endif
-  if (map->p) free(map->p);
-  free(map);
+	
+	if((val = fcntl(fd, F_GETFL, 0)) == -1)
+		return -1;
+	val |= FLAG_TO_SET;
+	return fcntl( fd, F_SETFL, val);
+#undef FLAG_TO_SET
 }
 
 
@@ -122,14 +61,14 @@ int piped_child(char **command,int *f_in,int *f_out)
   if (pipe(to_child_pipe) < 0 ||
       pipe(from_child_pipe) < 0) {
     rprintf(FERROR,"pipe: %s\n",strerror(errno));
-    exit_cleanup(1);
+    exit_cleanup(RERR_IPC);
   }
 
 
   pid = do_fork();
   if (pid < 0) {
     rprintf(FERROR,"fork: %s\n",strerror(errno));
-    exit_cleanup(1);
+    exit_cleanup(RERR_IPC);
   }
 
   if (pid == 0)
@@ -140,7 +79,7 @@ int piped_child(char **command,int *f_in,int *f_out)
 	  close(from_child_pipe[0]) < 0 ||
 	  dup2(from_child_pipe[1], STDOUT_FILENO) < 0) {
 	rprintf(FERROR,"Failed to dup/close : %s\n",strerror(errno));
-	exit_cleanup(1);
+	exit_cleanup(RERR_IPC);
       }
       if (to_child_pipe[0] != STDIN_FILENO) close(to_child_pipe[0]);
       if (from_child_pipe[1] != STDOUT_FILENO) close(from_child_pipe[1]);
@@ -148,17 +87,20 @@ int piped_child(char **command,int *f_in,int *f_out)
       execvp(command[0], command);
       rprintf(FERROR,"Failed to exec %s : %s\n",
 	      command[0],strerror(errno));
-      exit_cleanup(1);
+      exit_cleanup(RERR_IPC);
     }
 
   if (close(from_child_pipe[1]) < 0 ||
       close(to_child_pipe[0]) < 0) {
     rprintf(FERROR,"Failed to close : %s\n",strerror(errno));   
-    exit_cleanup(1);
+    exit_cleanup(RERR_IPC);
   }
 
   *f_in = from_child_pipe[0];
   *f_out = to_child_pipe[1];
+
+  set_nonblocking(*f_in);
+  set_nonblocking(*f_out);
   
   return pid;
 }
@@ -172,14 +114,14 @@ int local_child(int argc, char **argv,int *f_in,int *f_out)
 	if (pipe(to_child_pipe) < 0 ||
 	    pipe(from_child_pipe) < 0) {
 		rprintf(FERROR,"pipe: %s\n",strerror(errno));
-		exit_cleanup(1);
+		exit_cleanup(RERR_IPC);
 	}
 
 
 	pid = do_fork();
 	if (pid < 0) {
 		rprintf(FERROR,"fork: %s\n",strerror(errno));
-		exit_cleanup(1);
+		exit_cleanup(RERR_IPC);
 	}
 
 	if (pid == 0) {
@@ -194,7 +136,7 @@ int local_child(int argc, char **argv,int *f_in,int *f_out)
 		    close(from_child_pipe[0]) < 0 ||
 		    dup2(from_child_pipe[1], STDOUT_FILENO) < 0) {
 			rprintf(FERROR,"Failed to dup/close : %s\n",strerror(errno));
-			exit_cleanup(1);
+			exit_cleanup(RERR_IPC);
 		}
 		if (to_child_pipe[0] != STDIN_FILENO) close(to_child_pipe[0]);
 		if (from_child_pipe[1] != STDOUT_FILENO) close(from_child_pipe[1]);
@@ -204,7 +146,7 @@ int local_child(int argc, char **argv,int *f_in,int *f_out)
 	if (close(from_child_pipe[1]) < 0 ||
 	    close(to_child_pipe[0]) < 0) {
 		rprintf(FERROR,"Failed to close : %s\n",strerror(errno));   
-		exit_cleanup(1);
+		exit_cleanup(RERR_IPC);
 	}
 
 	*f_in = from_child_pipe[0];
@@ -218,13 +160,13 @@ int local_child(int argc, char **argv,int *f_in,int *f_out)
 void out_of_memory(char *str)
 {
   rprintf(FERROR,"ERROR: out of memory in %s\n",str);
-  exit_cleanup(1);
+  exit_cleanup(RERR_MALLOC);
 }
 
 void overflow(char *str)
 {
   rprintf(FERROR,"ERROR: buffer overflow in %s\n",str);
-  exit_cleanup(1);
+  exit_cleanup(RERR_MALLOC);
 }
 
 
@@ -256,36 +198,6 @@ int set_modtime(char *fname,time_t modtime)
 }
 
 
-
-/****************************************************************************
-Set a fd into blocking/nonblocking mode. Uses POSIX O_NONBLOCK if available,
-else
-if SYSV use O_NDELAY
-if BSD use FNDELAY
-****************************************************************************/
-int set_blocking(int fd, int set)
-{
-  int val;
-#ifdef O_NONBLOCK
-#define FLAG_TO_SET O_NONBLOCK
-#else
-#ifdef SYSV
-#define FLAG_TO_SET O_NDELAY
-#else /* BSD */
-#define FLAG_TO_SET FNDELAY
-#endif
-#endif
-
-  if((val = fcntl(fd, F_GETFL, 0)) == -1)
-	return -1;
-  if(set) /* Turn blocking on - ie. clear nonblock flag */
-	val &= ~FLAG_TO_SET;
-  else
-    val |= FLAG_TO_SET;
-  return fcntl( fd, F_SETFL, val);
-#undef FLAG_TO_SET
-}
-
 /****************************************************************************
 create any necessary directories in fname. Unfortunately we don't know
 what perms to give the directory when this is called so we need to rely
@@ -315,7 +227,7 @@ int create_directory_path(char *fname)
 
    derived from GNU C's cccp.c.
 */
-int full_write(int desc, char *ptr, int len)
+static int full_write(int desc, char *ptr, int len)
 {
 	int total_written;
 	
@@ -341,7 +253,7 @@ int full_write(int desc, char *ptr, int len)
    for an error.  
 
    derived from GNU C's cccp.c. */
-int safe_read(int desc, char *ptr, int len)
+static int safe_read(int desc, char *ptr, int len)
 {
 	int n_chars;
  
@@ -382,7 +294,7 @@ int copy_file(char *source, char *dest, mode_t mode)
 	}
 
 	ofd = do_open(dest, O_WRONLY | O_CREAT | O_TRUNC | O_EXCL, mode);
-	if (ofd < 0) {
+	if (ofd == -1) {
 		rprintf(FERROR,"open %s: %s\n",
 			dest,strerror(errno));
 		close(ifd);
@@ -498,14 +410,6 @@ int name_to_gid(char *name, gid_t *gid)
 }
 
 
-/****************************************************************************
-check if a process exists. 
-****************************************************************************/
-int process_exists(int pid)
-{
-	return(kill(pid,0) == 0 || errno != ESRCH);
-}
-
 /* lock a byte range in a open file */
 int lock_range(int fd, int offset, int len)
 {
@@ -523,7 +427,7 @@ int lock_range(int fd, int offset, int len)
 
 static void glob_expand_one(char *s, char **argv, int *argc, int maxargs)
 {
-#ifndef HAVE_GLOB
+#if !(defined(HAVE_GLOB) && defined(HAVE_GLOB_H))
 	if (!*s) s = ".";
 	argv[*argc] = strdup(s);
 	(*argc)++;
@@ -553,10 +457,11 @@ static void glob_expand_one(char *s, char **argv, int *argc, int maxargs)
 #endif
 }
 
-void glob_expand(char *base, char **argv, int *argc, int maxargs)
+void glob_expand(char *base1, char **argv, int *argc, int maxargs)
 {
 	char *s = argv[*argc];
 	char *p, *q;
+	char *base = base1;
 
 	if (!s || !*s) return;
 
@@ -567,21 +472,23 @@ void glob_expand(char *base, char **argv, int *argc, int maxargs)
 	s = strdup(s);
 	if (!s) out_of_memory("glob_expand");
 
+	base = (char *)malloc(strlen(base1)+3);
+	if (!base) out_of_memory("glob_expand");
+
+	sprintf(base," %s/", base1);
+
 	q = s;
 	while ((p = strstr(q,base)) && ((*argc) < maxargs)) {
-		if (p != q && *(p-1) == ' ' && p[strlen(base)] == '/') {
-			/* split it at this point */
-			*(p-1) = 0;
-			glob_expand_one(q, argv, argc, maxargs);
-			q = p+strlen(base)+1;
-		} else {
-			q++;
-		}
+		/* split it at this point */
+		*p = 0;
+		glob_expand_one(q, argv, argc, maxargs);
+		q = p+strlen(base);
 	}
 
 	if (*q && (*argc < maxargs)) glob_expand_one(q, argv, argc, maxargs);
 
 	free(s);
+	free(base);
 }
 
 /*******************************************************************
@@ -600,7 +507,6 @@ void strlower(char *s)
    pass 1023 for n */
 int vslprintf(char *str, int n, const char *format, va_list ap)
 {
-#ifdef HAVE_VSNPRINTF
 	int ret = vsnprintf(str, n, format, ap);
 	if (ret > n || ret < 0) {
 		str[n] = 0;
@@ -608,49 +514,6 @@ int vslprintf(char *str, int n, const char *format, va_list ap)
 	}
 	str[ret] = 0;
 	return ret;
-#else
-	static char *buf;
-	static int len=MAXPATHLEN*8;
-	int ret;
-
-	/* this code is NOT a proper vsnprintf() implementation. It
-	   relies on the fact that all calls to slprintf() in rsync
-	   pass strings which have already been checked to be less
-	   than MAXPATHLEN in length and never more than 2 strings are
-	   concatenated. This means the above buffer is absolutely
-	   ample and can never be overflowed.
-
-	   In the future we would like to replace this with a proper
-	   vsnprintf() implementation but right now we need a solution
-	   that is secure and portable. This is it.  */
-
-	if (!buf) {
-		buf = malloc(len);
-		if (!buf) {
-			/* can't call debug or we would recurse */
-			exit(1);
-		}
-	}
-
-	ret = vsprintf(buf, format, ap);
-
-	if (ret < 0) {
-		str[0] = 0;
-		return -1;
-	}
-
-	if (ret < n) {
-		n = ret;
-	} else if (ret > n) {
-		ret = -1;
-	}
-
-	buf[n] = 0;
-	
-	memcpy(str, buf, n+1);
-
-	return ret;
-#endif
 }
 
 
@@ -665,3 +528,262 @@ int slprintf(char *str, int n, char *format, ...)
 	va_end(ap);
 	return ret;
 }
+
+
+void *Realloc(void *p, int size)
+{
+	if (!p) return (void *)malloc(size);
+	return (void *)realloc(p, size);
+}
+
+
+void clean_fname(char *name)
+{
+	char *p;
+	int l;
+	int modified = 1;
+
+	if (!name) return;
+
+	while (modified) {
+		modified = 0;
+
+		if ((p=strstr(name,"/./"))) {
+			modified = 1;
+			while (*p) {
+				p[0] = p[2];
+				p++;
+			}
+		}
+
+		if ((p=strstr(name,"//"))) {
+			modified = 1;
+			while (*p) {
+				p[0] = p[1];
+				p++;
+			}
+		}
+
+		if (strncmp(p=name,"./",2) == 0) {      
+			modified = 1;
+			do {
+				p[0] = p[2];
+			} while (*p++);
+		}
+
+		l = strlen(p=name);
+		if (l > 1 && p[l-1] == '/') {
+			modified = 1;
+			p[l-1] = 0;
+		}
+	}
+}
+
+/*
+ * Make path appear as if a chroot had occurred:
+ *    0. call clean_fname on it.
+ *    1. remove leading "/" (or replace with "." if at end)
+ *    2. remove leading ".." components
+ *    3. delete any other "<dir>/.." (recursively)
+ * Return a malloc'ed copy.
+ * Contributed by Dave Dykstra <dwd@bell-labs.com>
+ */
+
+char *sanitize_path(char *p)
+{
+	char *copy, *copyp;
+
+	clean_fname(p);
+
+	copy = (char *) malloc(strlen(p)+1);
+	copyp = copy;
+	while (*p != '\0') {
+		if ((*p == '/') && (copyp == copy)) {
+			/* remove leading slash */
+			p++;
+		}
+		else if ((*p == '.') && (*(p+1) == '.') &&
+			    ((*(p+2) == '/') || (*(p+2) == '\0'))) {
+			/* remove .. followed by slash or end */
+			p += 2;
+			if (copyp != copy) {
+				/* backup the copy one level */
+				while ((--copyp != copy) && (*copyp == '/'))
+					/* skip trailing slashes */
+					;
+				while ((copyp != copy) && (*copyp != '/'))
+					/* skip back through slash */
+					copyp--;
+			}
+		} else {
+			/* copy one component */
+			while (1) {
+				*copyp++ = *p++;
+				if ((*p == '\0') || (*(p-1) == '/'))
+					break;
+			}
+		}
+	}
+	*copyp = '\0';
+	return(copy);
+}
+
+
+static char curr_dir[MAXPATHLEN];
+
+/* like chdir() but can be reversed with pop_dir() if save is set. It
+   is also much faster as it remembers where we have been */
+char *push_dir(char *dir, int save)
+{
+	char *ret = curr_dir;
+	static int initialised;
+
+	if (!initialised) {
+		initialised = 1;
+		getcwd(curr_dir, sizeof(curr_dir)-1);
+	}
+
+	if (chdir(dir)) return NULL;
+
+	if (save) {
+		ret = strdup(curr_dir);
+	}
+
+	if (*dir == '/') {
+		strlcpy(curr_dir, dir, sizeof(curr_dir)-1);
+	} else {
+		strlcat(curr_dir,"/", sizeof(curr_dir)-1);
+		strlcat(curr_dir,dir, sizeof(curr_dir)-1);
+	}
+
+	clean_fname(curr_dir);
+
+	return ret;
+}
+
+/* reverse a push_dir call */
+int pop_dir(char *dir)
+{
+	int ret;
+
+	ret = chdir(dir);
+	if (ret) {
+		free(dir);
+		return ret;
+	}
+
+	strlcpy(curr_dir, dir, sizeof(curr_dir)-1);
+
+	free(dir);
+
+	return 0;
+}
+
+/* we need to supply our own strcmp function for file list comparisons
+   to ensure that signed/unsigned usage is consistent between machines. */
+int u_strcmp(const char *cs1, const char *cs2)
+{
+	const uchar *s1 = (uchar *)cs1;
+	const uchar *s2 = (uchar *)cs2;
+
+	while (*s1 && *s2 && (*s1 == *s2)) {
+		s1++; s2++;
+	}
+	
+	return (int)*s1 - (int)*s2;
+}
+
+static OFF_T last_ofs;
+
+void end_progress(void)
+{
+	extern int do_progress, am_server;
+
+	if (do_progress && !am_server) {
+		rprintf(FINFO,"\n");
+	}
+	last_ofs = 0;
+}
+
+void show_progress(OFF_T ofs, OFF_T size)
+{
+	extern int do_progress, am_server;
+
+	if (do_progress && !am_server) {
+		if (ofs > last_ofs + 1000) {
+			int pct = (int)((100.0*ofs)/size);
+			rprintf(FINFO,"%.0f (%d%%)\r", (double)ofs, pct);
+			last_ofs = ofs;
+		}
+	}
+}
+
+/* determine if a symlink points outside the current directory tree */
+int unsafe_symlink(char *dest, char *src)
+{
+	char *tok;
+	int depth = 0;
+
+	/* all absolute and null symlinks are unsafe */
+	if (!dest || !(*dest) || (*dest == '/')) return 1;
+
+	src = strdup(src);
+	if (!src) out_of_memory("unsafe_symlink");
+
+	/* find out what our safety margin is */
+	for (tok=strtok(src,"/"); tok; tok=strtok(NULL,"/")) {
+		if (strcmp(tok,"..") == 0) {
+			depth=0;
+		} else if (strcmp(tok,".") == 0) {
+			/* nothing */
+		} else {
+			depth++;
+		}
+	}
+	free(src);
+
+	/* drop by one to account for the filename portion */
+	depth--;
+
+	dest = strdup(dest);
+	if (!dest) out_of_memory("unsafe_symlink");
+
+	for (tok=strtok(dest,"/"); tok; tok=strtok(NULL,"/")) {
+		if (strcmp(tok,"..") == 0) {
+			depth--;
+		} else if (strcmp(tok,".") == 0) {
+			/* nothing */
+		} else {
+			depth++;
+		}
+		/* if at any point we go outside the current directory then
+		   stop - it is unsafe */
+		if (depth < 0) break;
+	}
+
+	free(dest);
+	return (depth < 0);
+}
+
+
+/****************************************************************************
+  return the date and time as a string
+****************************************************************************/
+char *timestring(time_t t)
+{
+	static char TimeBuf[200];
+	struct tm *tm = localtime(&t);
+
+#ifdef HAVE_STRFTIME
+	strftime(TimeBuf,sizeof(TimeBuf)-1,"%Y/%m/%d %T",tm);
+#else
+	strlcpy(TimeBuf, asctime(tm), sizeof(TimeBuf)-1);
+#endif
+
+	if (TimeBuf[strlen(TimeBuf)-1] == '\n') {
+		TimeBuf[strlen(TimeBuf)-1] = 0;
+	}
+
+	return(TimeBuf);
+}
+

version.h

@@ -1 +1 @@
-#define VERSION "2.0.4"
+#define VERSION "2.2.0"

zlib/README.rsync

@@ -0,0 +1,19 @@
+zlib has been adapted slightly for use in rsync. Please don't bother
+the zlib authors with problems related to the use of zlib in rsync as
+any bugs are likely to be our fault and not theirs.
+
+Specific changes that have been made to zlib for rsync include:
+
+- add Z_INSERT_ONLY to allow for efficient history updating without
+  actually emitting any data. This is used to compress the matched
+  blocks that don't cross the wire, which gives better compression
+  ratios on the literal data.
+
+- fixed a number of minor compilation issues. (redefinition of MAX and
+  other such trivial things)
+
+- include rsync.h to ensure that we get a consistent set of includes
+  for all C code in rsync and to take advantage of autoconf
+
+--
+Paul Mackerras and Andrew Tridgell

zlib/deflate.c

@@ -80,7 +80,7 @@ local block_state deflate_slow   OF((deflate_state *s, int flush));
 local void lm_init        OF((deflate_state *s));
 local void putShortMSB    OF((deflate_state *s, uInt b));
 local void flush_pending  OF((z_streamp strm));
-local int read_buf        OF((z_streamp strm, Bytef *buf, unsigned size));
+local int dread_buf        OF((z_streamp strm, Bytef *buf, unsigned size));
 #ifdef ASMV
       void match_init OF((void)); /* asm code initialization */
       uInt longest_match  OF((deflate_state *s, IPos cur_match));
@@ -411,7 +411,7 @@ local void putShortMSB (s, b)
  * Flush as much pending output as possible. All deflate() output goes
  * through this function so some applications may wish to modify it
  * to avoid allocating a large strm->next_out buffer and copying into it.
- * (See also read_buf()).
+ * (See also dread_buf()).
  */
 local void flush_pending(strm)
     z_streamp strm;
@@ -441,7 +441,7 @@ int ZEXPORT deflate (strm, flush)
     deflate_state *s;
 
     if (strm == Z_NULL || strm->state == Z_NULL ||
-	flush > Z_FINISH || flush < 0) {
+	flush > Z_INSERT_ONLY || flush < 0) {
         return Z_STREAM_ERROR;
     }
     s = strm->state;
@@ -657,7 +657,7 @@ int ZEXPORT deflateCopy (dest, source)
  * allocating a large strm->next_in buffer and copying from it.
  * (See also flush_pending()).
  */
-local int read_buf(strm, buf, size)
+local int dread_buf(strm, buf, size)
     z_streamp strm;
     Bytef *buf;
     unsigned size;
@@ -1028,7 +1028,7 @@ local void fill_window(s)
          */
         Assert(more >= 2, "more < 2");
 
-        n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
+        n = dread_buf(s->strm, s->window + s->strstart + s->lookahead, more);
         s->lookahead += n;
 
         /* Initialize the hash value now that we have some input: */
@@ -1162,6 +1162,12 @@ local block_state deflate_fast(s, flush)
             INSERT_STRING(s, s->strstart, hash_head);
         }
 
+	if (flush == Z_INSERT_ONLY) {
+	    s->strstart++;
+	    s->lookahead--;
+	    continue;
+	}
+
         /* Find the longest match, discarding those <= prev_length.
          * At this point we have always match_length < MIN_MATCH
          */
@@ -1221,6 +1227,10 @@ local block_state deflate_fast(s, flush)
         }
         if (bflush) FLUSH_BLOCK(s, 0);
     }
+    if (flush == Z_INSERT_ONLY) {
+	s->block_start = s->strstart;
+	return need_more;
+    }
     FLUSH_BLOCK(s, flush == Z_FINISH);
     return flush == Z_FINISH ? finish_done : block_done;
 }
@@ -1259,6 +1269,12 @@ local block_state deflate_slow(s, flush)
             INSERT_STRING(s, s->strstart, hash_head);
         }
 
+	if (flush == Z_INSERT_ONLY) {
+	    s->strstart++;
+	    s->lookahead--;
+	    continue;
+	}
+
         /* Find the longest match, discarding those <= prev_length.
          */
         s->prev_length = s->match_length, s->prev_match = s->match_start;
@@ -1337,6 +1353,10 @@ local block_state deflate_slow(s, flush)
             s->lookahead--;
         }
     }
+    if (flush == Z_INSERT_ONLY) {
+	s->block_start = s->strstart;
+	return need_more;
+    }
     Assert (flush != Z_NO_FLUSH, "no flush?");
     if (s->match_available) {
         Tracevv((stderr,"%c", s->window[s->strstart-1]));

zlib/infblock.c

@@ -176,7 +176,7 @@ int r;
           break;
         case 3:                         /* illegal */
           DUMPBITS(3)
-          s->mode = BAD;
+          s->mode = zBAD;
           z->msg = (char*)"invalid block type";
           r = Z_DATA_ERROR;
           LEAVE
@@ -186,7 +186,7 @@ int r;
       NEEDBITS(32)
       if ((((~b) >> 16) & 0xffff) != (b & 0xffff))
       {
-        s->mode = BAD;
+        s->mode = zBAD;
         z->msg = (char*)"invalid stored block lengths";
         r = Z_DATA_ERROR;
         LEAVE
@@ -219,7 +219,7 @@ int r;
 #ifndef PKZIP_BUG_WORKAROUND
       if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
       {
-        s->mode = BAD;
+        s->mode = zBAD;
         z->msg = (char*)"too many length or distance symbols";
         r = Z_DATA_ERROR;
         LEAVE
@@ -252,7 +252,7 @@ int r;
         ZFREE(z, s->sub.trees.blens);
         r = t;
         if (r == Z_DATA_ERROR)
-          s->mode = BAD;
+          s->mode = zBAD;
         LEAVE
       }
       s->sub.trees.index = 0;
@@ -289,7 +289,7 @@ int r;
               (c == 16 && i < 1))
           {
             ZFREE(z, s->sub.trees.blens);
-            s->mode = BAD;
+            s->mode = zBAD;
             z->msg = (char*)"invalid bit length repeat";
             r = Z_DATA_ERROR;
             LEAVE
@@ -317,7 +317,7 @@ int r;
         if (t != Z_OK)
         {
           if (t == (uInt)Z_DATA_ERROR)
-            s->mode = BAD;
+            s->mode = zBAD;
           r = t;
           LEAVE
         }
@@ -361,7 +361,7 @@ int r;
     case DONE:
       r = Z_STREAM_END;
       LEAVE
-    case BAD:
+    case zBAD:
       r = Z_DATA_ERROR;
       LEAVE
     default:

zlib/inflate.c

@@ -22,7 +22,7 @@ typedef enum {
       CHECK2,   /* two check bytes to go */
       CHECK1,   /* one check byte to go */
       DONE,     /* finished check, done */
-      BAD}      /* got an error--stay here */
+      zBAD}      /* got an error--stay here */
 inflate_mode;
 
 /* inflate private state */
@@ -38,7 +38,7 @@ struct internal_state {
       uLong was;                /* computed check value */
       uLong need;               /* stream check value */
     } check;            /* if CHECK, check values to compare */
-    uInt marker;        /* if BAD, inflateSync's marker bytes count */
+    uInt marker;        /* if zBAD, inflateSync's marker bytes count */
   } sub;        /* submode */
 
   /* mode independent information */
@@ -164,14 +164,14 @@ int f;
       NEEDBYTE
       if (((z->state->sub.method = NEXTBYTE) & 0xf) != Z_DEFLATED)
       {
-        z->state->mode = BAD;
+        z->state->mode = zBAD;
         z->msg = (char*)"unknown compression method";
         z->state->sub.marker = 5;       /* can't try inflateSync */
         break;
       }
       if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
       {
-        z->state->mode = BAD;
+        z->state->mode = zBAD;
         z->msg = (char*)"invalid window size";
         z->state->sub.marker = 5;       /* can't try inflateSync */
         break;
@@ -182,7 +182,7 @@ int f;
       b = NEXTBYTE;
       if (((z->state->sub.method << 8) + b) % 31)
       {
-        z->state->mode = BAD;
+        z->state->mode = zBAD;
         z->msg = (char*)"incorrect header check";
         z->state->sub.marker = 5;       /* can't try inflateSync */
         break;
@@ -213,7 +213,7 @@ int f;
       z->state->mode = DICT0;
       return Z_NEED_DICT;
     case DICT0:
-      z->state->mode = BAD;
+      z->state->mode = zBAD;
       z->msg = (char*)"need dictionary";
       z->state->sub.marker = 0;       /* can try inflateSync */
       return Z_STREAM_ERROR;
@@ -221,7 +221,7 @@ int f;
       r = inflate_blocks(z->state->blocks, z, r);
       if (r == Z_DATA_ERROR)
       {
-        z->state->mode = BAD;
+        z->state->mode = zBAD;
         z->state->sub.marker = 0;       /* can try inflateSync */
         break;
       }
@@ -255,7 +255,7 @@ int f;
 
       if (z->state->sub.check.was != z->state->sub.check.need)
       {
-        z->state->mode = BAD;
+        z->state->mode = zBAD;
         z->msg = (char*)"incorrect data check";
         z->state->sub.marker = 5;       /* can't try inflateSync */
         break;
@@ -264,7 +264,7 @@ int f;
       z->state->mode = DONE;
     case DONE:
       return Z_STREAM_END;
-    case BAD:
+    case zBAD:
       return Z_DATA_ERROR;
     default:
       return Z_STREAM_ERROR;
@@ -310,9 +310,9 @@ z_streamp z;
   /* set up */
   if (z == Z_NULL || z->state == Z_NULL)
     return Z_STREAM_ERROR;
-  if (z->state->mode != BAD)
+  if (z->state->mode != zBAD)
   {
-    z->state->mode = BAD;
+    z->state->mode = zBAD;
     z->state->sub.marker = 0;
   }
   if ((n = z->avail_in) == 0)

zlib/infutil.h

@@ -21,7 +21,7 @@ typedef enum {
       CODES,    /* processing fixed or dynamic block */
       DRY,      /* output remaining window bytes */
       DONE,     /* finished last block, done */
-      BAD}      /* got a data error--stuck here */
+      zBAD}      /* got a data error--stuck here */
 inflate_block_mode;
 
 /* inflate blocks semi-private state */
@@ -77,9 +77,9 @@ struct inflate_blocks_state {
 /*   output bytes */
 #define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q)
 #define LOADOUT {q=s->write;m=(uInt)WAVAIL;}
-#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}}
+#define ZWRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}}
 #define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
-#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;}
+#define NEEDOUT {if(m==0){ZWRAP if(m==0){FLUSH ZWRAP if(m==0) LEAVE}}r=Z_OK;}
 #define OUTBYTE(a) {*q++=(Byte)(a);m--;}
 /*   load local pointers */
 #define LOAD {LOADIN LOADOUT}

zlib/trees.c

@@ -230,7 +230,9 @@ local void send_bits(s, value, length)
 #endif /* DEBUG */
 
 
-#define MAX(a,b) (a >= b ? a : b)
+#ifndef MAX
+#define MAX(a,b) ((a) >= (b) ? (a) : (b))
+#endif
 /* the arguments must not have side effects */
 
 /* ===========================================================================
@@ -497,7 +499,7 @@ local void gen_bitlen(s, desc)
     int bits;           /* bit length */
     int xbits;          /* extra bits */
     ush f;              /* frequency */
-    int overflow = 0;   /* number of elements with bit length too large */
+    int Overflow = 0;   /* number of elements with bit length too large */
 
     for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
 
@@ -509,7 +511,7 @@ local void gen_bitlen(s, desc)
     for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
         n = s->heap[h];
         bits = tree[tree[n].Dad].Len + 1;
-        if (bits > max_length) bits = max_length, overflow++;
+        if (bits > max_length) bits = max_length, Overflow++;
         tree[n].Len = (ush)bits;
         /* We overwrite tree[n].Dad which is no longer needed */
 
@@ -522,7 +524,7 @@ local void gen_bitlen(s, desc)
         s->opt_len += (ulg)f * (bits + xbits);
         if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
     }
-    if (overflow == 0) return;
+    if (Overflow == 0) return;
 
     Trace((stderr,"\nbit length overflow\n"));
     /* This happens for example on obj2 and pic of the Calgary corpus */
@@ -537,8 +539,8 @@ local void gen_bitlen(s, desc)
         /* The brother of the overflow item also moves one step up,
          * but this does not affect bl_count[max_length]
          */
-        overflow -= 2;
-    } while (overflow > 0);
+        Overflow -= 2;
+    } while (Overflow > 0);
 
     /* Now recompute all bit lengths, scanning in increasing frequency.
      * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all

zlib/zlib.h

@@ -127,6 +127,7 @@ typedef z_stream FAR *z_streamp;
 #define Z_SYNC_FLUSH    2
 #define Z_FULL_FLUSH    3
 #define Z_FINISH        4
+#define Z_INSERT_ONLY	5
 /* Allowed flush values; see deflate() below for details */
 
 #define Z_OK            0

zlib/zutil.c

@@ -200,11 +200,6 @@ void  zcfree (voidpf opaque, voidpf ptr)
 
 #ifndef MY_ZCALLOC /* Any system without a special alloc function */
 
-#ifndef STDC
-extern voidp  calloc OF((uInt items, uInt size));
-extern void   free   OF((voidpf ptr));
-#endif
-
 voidpf zcalloc (opaque, items, size)
     voidpf opaque;
     unsigned items;

zlib/zutil.h

@@ -13,8 +13,10 @@
 #ifndef _Z_UTIL_H
 #define _Z_UTIL_H
 
+#include "../rsync.h"
 #include "zlib.h"
 
+#if 0
 #ifdef STDC
 #  include <stddef.h>
 #  include <string.h>
@@ -25,6 +27,7 @@
 #else
 #   include <errno.h>
 #endif
+#endif
 
 #ifndef local
 #  define local static