Bump version to 2.4.8

in some cases we were not sufficiently careful about reading integers
from the network.

.cvsignore

@@ -1,15 +1,9 @@
 ID
 Makefile
-autom4te*.cache
-confdefs.h
 config.cache
 config.h
 config.log
 config.status
-conftest.c
-conftest.log
-dox
-getgroups
 gmon.out
 rsync
 shconfig
@@ -18,8 +12,4 @@ tests-dont-exist
 testtmp
 testtmp.*
 tls
-trimslash
-t_unsafe
-wildtest
-getfsdev
-.rsync-filter
+zlib/dummy

COPYING

@@ -2,7 +2,7 @@
 		       Version 2, June 1991
 
  Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                       59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+                          675 Mass Ave, Cambridge, MA 02139, USA
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
@@ -279,7 +279,7 @@ POSSIBILITY OF SUCH DAMAGES.
 
 		     END OF TERMS AND CONDITIONS
 
-	    How to Apply These Terms to Your New Programs
+	Appendix: How to Apply These Terms to Your New Programs
 
   If you develop a new program, and you want it to be of the greatest
 possible use to the public, the best way to achieve this is to make it
@@ -291,7 +291,7 @@ convey the exclusion of warranty; and each file should have at least
 the "copyright" line and a pointer to where the full notice is found.
 
     <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
+    Copyright (C) 19yy  <name of author>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -305,15 +305,14 @@ the "copyright" line and a pointer to where the full notice is found.
 
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 
 Also add information on how to contact you by electronic and paper mail.
 
 If the program is interactive, make it output a short notice like this
 when it starts in an interactive mode:
 
-    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision version 69, Copyright (C) 19yy name of author
     Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
     This is free software, and you are welcome to redistribute it
     under certain conditions; type `show c' for details.

Doxyfile

@@ -1,187 +0,0 @@
-# Doxyfile 1.2.15
-
-#---------------------------------------------------------------------------
-# General configuration options
-#---------------------------------------------------------------------------
-PROJECT_NAME           = rsync
-PROJECT_NUMBER         = HEAD
-OUTPUT_DIRECTORY       = dox
-OUTPUT_LANGUAGE        = English
-EXTRACT_ALL            = YES
-EXTRACT_PRIVATE        = YES
-EXTRACT_STATIC         = YES
-EXTRACT_LOCAL_CLASSES  = YES
-HIDE_UNDOC_MEMBERS     = NO
-HIDE_UNDOC_CLASSES     = NO
-BRIEF_MEMBER_DESC      = YES
-REPEAT_BRIEF           = YES
-ALWAYS_DETAILED_SEC    = NO
-INLINE_INHERITED_MEMB  = NO
-FULL_PATH_NAMES        = NO
-STRIP_FROM_PATH        = *source
-INTERNAL_DOCS          = YES
-STRIP_CODE_COMMENTS    = NO
-CASE_SENSE_NAMES       = YES
-SHORT_NAMES            = NO
-HIDE_SCOPE_NAMES       = YES
-VERBATIM_HEADERS       = YES
-SHOW_INCLUDE_FILES     = YES
-JAVADOC_AUTOBRIEF      = YES
-INHERIT_DOCS           = YES
-INLINE_INFO            = YES
-SORT_MEMBER_DOCS       = NO
-DISTRIBUTE_GROUP_DOC   = NO
-TAB_SIZE               = 8
-GENERATE_TODOLIST      = YES
-GENERATE_TESTLIST      = YES
-GENERATE_BUGLIST       = YES
-ALIASES                = 
-ENABLED_SECTIONS       = 
-MAX_INITIALIZER_LINES  = 30
-OPTIMIZE_OUTPUT_FOR_C  = YES
-OPTIMIZE_OUTPUT_JAVA   = NO
-SHOW_USED_FILES        = YES
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-QUIET                  = NO
-WARNINGS               = NO
-WARN_IF_UNDOCUMENTED   = NO
-WARN_FORMAT            = "$file:$line: $text"
-WARN_LOGFILE           = 
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-INPUT                  = .
-FILE_PATTERNS          = *.c \
-                         *.h
-RECURSIVE              = YES
-EXCLUDE                = proto.h \
-                         zlib \
-                         popt
-EXCLUDE_SYMLINKS       = NO
-EXCLUDE_PATTERNS       = 
-EXAMPLE_PATH           = 
-EXAMPLE_PATTERNS       = 
-EXAMPLE_RECURSIVE      = NO
-IMAGE_PATH             = 
-INPUT_FILTER           = 
-FILTER_SOURCE_FILES    = NO
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-SOURCE_BROWSER         = YES
-INLINE_SOURCES         = YES
-REFERENCED_BY_RELATION = YES
-REFERENCES_RELATION    = YES
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-ALPHABETICAL_INDEX     = YES
-COLS_IN_ALPHA_INDEX    = 3
-IGNORE_PREFIX          = 
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-GENERATE_HTML          = YES
-HTML_OUTPUT            = html
-HTML_FILE_EXTENSION    = .html
-HTML_HEADER            = 
-HTML_FOOTER            = 
-HTML_STYLESHEET        = 
-HTML_ALIGN_MEMBERS     = YES
-GENERATE_HTMLHELP      = NO
-GENERATE_CHI           = NO
-BINARY_TOC             = NO
-TOC_EXPAND             = NO
-DISABLE_INDEX          = NO
-ENUM_VALUES_PER_LINE   = 3
-GENERATE_TREEVIEW      = NO
-TREEVIEW_WIDTH         = 250
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-GENERATE_LATEX         = NO
-LATEX_OUTPUT           = latex
-LATEX_CMD_NAME         = latex
-MAKEINDEX_CMD_NAME     = makeindex
-COMPACT_LATEX          = NO
-PAPER_TYPE             = a4wide
-EXTRA_PACKAGES         = 
-LATEX_HEADER           = 
-PDF_HYPERLINKS         = YES
-USE_PDFLATEX           = YES
-LATEX_BATCHMODE        = YES
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-GENERATE_RTF           = NO
-RTF_OUTPUT             = rtf
-COMPACT_RTF            = NO
-RTF_HYPERLINKS         = NO
-RTF_STYLESHEET_FILE    = 
-RTF_EXTENSIONS_FILE    = 
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-GENERATE_MAN           = NO
-MAN_OUTPUT             = man
-MAN_EXTENSION          = .3
-MAN_LINKS              = NO
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-GENERATE_XML           = NO
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-GENERATE_AUTOGEN_DEF   = NO
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor   
-#---------------------------------------------------------------------------
-ENABLE_PREPROCESSING   = NO
-MACRO_EXPANSION        = NO
-EXPAND_ONLY_PREDEF     = NO
-SEARCH_INCLUDES        = YES
-INCLUDE_PATH           = 
-INCLUDE_FILE_PATTERNS  = 
-PREDEFINED             = 
-EXPAND_AS_DEFINED      = 
-SKIP_FUNCTION_MACROS   = YES
-#---------------------------------------------------------------------------
-# Configuration::addtions related to external references   
-#---------------------------------------------------------------------------
-TAGFILES               = 
-GENERATE_TAGFILE       = 
-ALLEXTERNALS           = NO
-EXTERNAL_GROUPS        = YES
-PERL_PATH              = /usr/bin/perl
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool   
-#---------------------------------------------------------------------------
-CLASS_DIAGRAMS         = YES
-HAVE_DOT               = YES
-CLASS_GRAPH            = YES
-COLLABORATION_GRAPH    = YES
-TEMPLATE_RELATIONS     = YES
-HIDE_UNDOC_RELATIONS   = YES
-INCLUDE_GRAPH          = YES
-INCLUDED_BY_GRAPH      = YES
-GRAPHICAL_HIERARCHY    = YES
-DOT_IMAGE_FORMAT       = png
-DOT_PATH               = 
-DOTFILE_DIRS           = 
-MAX_DOT_GRAPH_WIDTH    = 1024
-MAX_DOT_GRAPH_HEIGHT   = 1024
-GENERATE_LEGEND        = YES
-DOT_CLEANUP            = YES
-#---------------------------------------------------------------------------
-# Configuration::addtions related to the search engine   
-#---------------------------------------------------------------------------
-SEARCHENGINE           = NO
-CGI_NAME               = search.cgi
-CGI_URL                = 
-DOC_URL                = 
-DOC_ABSPATH            = 
-BIN_ABSPATH            = /usr/local/bin/
-EXT_DOC_PATHS          = 

INSTALL

@@ -11,21 +11,11 @@ to ./configure.  To see them, use:
 
 As of 2.4.7, rsync uses Eric Troan's popt option-parsing library.  A
 cut-down copy of release 1.5 is included in the rsync distribution,
-and will be used if there is no popt library on your build host, or if
+and will be used it there is no popt library on your build host, or if
 the --with-included-popt option is passed to ./configure.
 
-If you configure using --enable-maintainer-mode, then rsync will try
-to pop up an xterm on DISPLAY=:0 if it crashes.  You might find this
-useful, but it should be turned off for production builds.
 
 
-RPM NOTES
----------
-
-Under packaging you will find .spec files for several distributions.
-The .spec file in packaging/lsb can be used for Linux systems that
-adhere to the Linux Standards Base (e.g., RedHat and others).
-
 HP-UX NOTES
 -----------
 
@@ -48,11 +38,5 @@ completely implement the "New Sockets" API.
 <http://www.ipv6.org/impl/mac.html> says that Apple do not support
 IPv6 yet.  If your build fails, try again with --disable-ipv6.
 
-IBM AIX NOTES
--------------
 
-IBM AIX has a largefile problem with mkstemp.  See IBM PR-51921.
-The workaround is to append the below to config.h
-	#ifdef _LARGE_FILES
-	#undef HAVE_SECURE_MKSTEMP
-	#endif
+

Makefile.in

@@ -9,12 +9,9 @@ mandir=@mandir@
 LIBS=@LIBS@
 CC=@CC@
 CFLAGS=@CFLAGS@
-CPPFLAGS=@CPPFLAGS@
-EXEEXT=@EXEEXT@
 LDFLAGS=@LDFLAGS@
 
 INSTALLCMD=@INSTALL@
-INSTALLMAN=@INSTALL@
 
 srcdir=@srcdir@
 VPATH=$(srcdir)
@@ -25,113 +22,77 @@ VERSION=@VERSION@
 .SUFFIXES:
 .SUFFIXES: .c .o
 
-HEADERS=byteorder.h config.h errcode.h proto.h rsync.h lib/pool_alloc.h
-LIBOBJ=lib/wildmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o \
-	lib/permstring.o lib/pool_alloc.o @LIBOBJS@
+LIBOBJ=lib/fnmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o \
+	lib/permstring.o \
+	@LIBOBJS@
 ZLIBOBJ=zlib/deflate.o zlib/infblock.o zlib/infcodes.o zlib/inffast.o \
 	zlib/inflate.o zlib/inftrees.o zlib/infutil.o zlib/trees.o \
-	zlib/zutil.o zlib/adler32.o
-OBJS1=rsync.o generator.o receiver.o cleanup.o sender.o exclude.o util.o \
-	main.o checksum.o match.o syscall.o log.o backup.o
-OBJS2=options.o flist.o io.o compat.o hlink.o token.o uidlist.o socket.o \
-	fileio.o batch.o clientname.o
-OBJS3=progress.o pipe.o
+	zlib/zutil.o zlib/adler32.o 
+OBJS1=rsync.o generator.o receiver.o cleanup.o sender.o exclude.o util.o main.o checksum.o match.o syscall.o log.o backup.o
+OBJS2=options.o flist.o io.o compat.o hlink.o token.o uidlist.o socket.o fileio.o batch.o
 DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o
 popt_OBJS=popt/findme.o  popt/popt.o  popt/poptconfig.o \
 	popt/popthelp.o popt/poptparse.o
-OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(DAEMON_OBJ) $(LIBOBJ) $(ZLIBOBJ) @BUILD_POPT@
+OBJS=$(OBJS1) $(OBJS2) $(DAEMON_OBJ) $(LIBOBJ) $(ZLIBOBJ) @BUILD_POPT@
 
-TLS_OBJ = tls.o syscall.o lib/compat.o lib/snprintf.o lib/permstring.o
+tls_OBJ = tls.o syscall.o lib/permstring.o 
 
 # Programs we must have to run the test cases
-CHECK_PROGS = rsync$(EXEEXT) tls$(EXEEXT) getgroups$(EXEEXT) getfsdev$(EXEEXT) \
-	trimslash$(EXEEXT) t_unsafe$(EXEEXT) wildtest$(EXEEXT)
-
-# Objects for CHECK_PROGS to clean
-CHECK_OBJS=getgroups.o getfsdev.o t_stub.o t_unsafe.o trimslash.o wildtest.o
+CHECK_PROGS = rsync tls
 
 # note that the -I. is needed to handle config.h when using VPATH
 .c.o:
 @OBJ_SAVE@
-	$(CC) -I. -I$(srcdir) $(CFLAGS) $(CPPFLAGS) -c $< @CC_SHOBJ_FLAG@
+	$(CC) -I. -I$(srcdir) $(CFLAGS) -c $< @CC_SHOBJ_FLAG@
 @OBJ_RESTORE@
 
-all: rsync$(EXEEXT)
+all: rsync
+
+man: rsync.1 rsyncd.conf.5
 
 install: all
-	-mkdir -p ${DESTDIR}${bindir}
-	${INSTALLCMD} ${INSTALL_STRIP} -m 755 rsync$(EXEEXT) ${DESTDIR}${bindir}
-	-mkdir -p ${DESTDIR}${mandir}/man1
-	-mkdir -p ${DESTDIR}${mandir}/man5
-	${INSTALLMAN} -m 644 $(srcdir)/rsync.1 ${DESTDIR}${mandir}/man1
-	${INSTALLMAN} -m 644 $(srcdir)/rsyncd.conf.5 ${DESTDIR}${mandir}/man5
+	-mkdir -p ${bindir}
+	${INSTALLCMD} -m 755 rsync ${bindir}
+	-mkdir -p ${mandir}/man1
+	-mkdir -p ${mandir}/man5
+	${INSTALLCMD} -m 644 $(srcdir)/rsync.1 ${mandir}/man1
+	${INSTALLCMD} -m 644 $(srcdir)/rsyncd.conf.5 ${mandir}/man5
 
 install-strip:
-	$(MAKE) INSTALL_STRIP='-s' install
+	$(MAKE) INSTALLCMD='$(INSTALLCMD) -s' install
 
-rsync$(EXEEXT): $(OBJS)
-	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
+rsync: $(OBJS)
+	@echo "Please ignore warnings below about mktemp -- it is used in a safe way"
+	$(CC) $(CFLAGS) $(LDFLAGS) -o rsync $(OBJS) $(LIBS)
 
-$(OBJS): $(HEADERS)
+$(OBJS): config.h
 
-tls$(EXEEXT): $(TLS_OBJ)
-	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TLS_OBJ) $(LIBS)
+tls: $(tls_OBJ)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(tls_OBJ) $(LIBS)
 
-getgroups$(EXEEXT): getgroups.o
-	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getgroups.o $(LIBS)
+Makefile: Makefile.in configure config.status
+	echo "WARNING: You need to run ./config.status --recheck"
 
-getfsdev$(EXEEXT): getfsdev.o
-	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getfsdev.o $(LIBS)
+# don't actually run autoconf, just issue a warning
+configure: configure.in
+	echo "WARNING: you need to rerun autoconf"
 
-TRIMSLASH_OBJ = trimslash.o syscall.o lib/compat.o lib/snprintf.o
-trimslash$(EXEEXT): $(TRIMSLASH_OBJ)
-	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TRIMSLASH_OBJ) $(LIBS)
+rsync.1: rsync.yo
+	yodl2man -o rsync.1 rsync.yo
 
-T_UNSAFE_OBJ = t_unsafe.o syscall.o util.o t_stub.o lib/compat.o lib/snprintf.o
-t_unsafe$(EXEEXT): $(T_UNSAFE_OBJ)
-	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(T_UNSAFE_OBJ) $(LIBS)
-
-gen: $(srcdir)/configure $(srcdir)/config.h.in proto man
-
-man: $(srcdir)/rsync.1 $(srcdir)/rsyncd.conf.5
-
-$(srcdir)/configure: $(srcdir)/configure.in $(srcdir)/aclocal.m4
-	cd $(srcdir); autoconf
-
-$(srcdir)/config.h.in: $(srcdir)/configure.in $(srcdir)/aclocal.m4
-	cd $(srcdir); autoheader
-
-$(srcdir)/rsync.1: $(srcdir)/rsync.yo
-	yodl2man -o $(srcdir)/rsync.1 $(srcdir)/rsync.yo
-
-$(srcdir)/rsyncd.conf.5: $(srcdir)/rsyncd.conf.yo
-	yodl2man -o $(srcdir)/rsyncd.conf.5 $(srcdir)/rsyncd.conf.yo
+rsyncd.conf.5: rsyncd.conf.yo
+	yodl2man -o rsyncd.conf.5 rsyncd.conf.yo
 
 proto:
-	cat $(srcdir)/*.c $(srcdir)/lib/compat.c | awk -f $(srcdir)/mkproto.awk >$(srcdir)/proto.h.new
-	if diff $(srcdir)/proto.h $(srcdir)/proto.h.new >/dev/null; then \
-	  rm $(srcdir)/proto.h.new; \
-	else \
-	  mv $(srcdir)/proto.h.new $(srcdir)/proto.h; \
-	fi
+	cat *.c lib/compat.c | awk -f mkproto.awk > proto.h
 
-clean: cleantests
-	rm -f *~ $(OBJS) $(TLS_OBJ) $(CHECK_PROGS) $(CHECK_OBJS)
+clean:
+	rm -f *~ $(OBJS) rsync $(TLS_OBJ) tls
+	rm -rf ./testtmp
+	rm -f config.cache 
 
-cleantests:
-	rm -rf ./testtmp*
-
-# We try to delete built files from both the source and build
-# directories, just in case somebody previously configured things in
-# the source directory.
 distclean: clean
 	rm -f Makefile config.h config.status
-	rm -f $(srcdir)/Makefile $(srcdir)/config.h $(srcdir)/config.status
-
-	rm -f config.cache config.log
-	rm -f $(srcdir)/config.cache $(srcdir)/config.log
-
-	rm -f shconfig $(srcdir)/shconfig
 
 # this target is really just for my use. It only works on a limited
 # range of machines and is used to produce a list of potentially
@@ -139,7 +100,7 @@ distclean: clean
 finddead:
 	nm *.o */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
 	nm *.o */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
-	comm -13 nmused.txt nmfns.txt
+	comm -13 nmused.txt nmfns.txt 
 
 # 'check' is the GNU name, 'test' is the name for everybody else :-)
 .PHONY: check test
@@ -150,6 +111,9 @@ test: check
 # There seems to be no standard way to specify some variables as
 # exported from a Makefile apart from listing them like this.
 
+# TODO: Tests that depend on built test aide programs like tls need to
+# know where the build directory is.
+
 # This depends on building rsync; if we need any helper programs it
 # should depend on them too.
 
@@ -158,41 +122,13 @@ test: check
 # might lose in the future where POSIX diverges from old sh.
 
 check: all $(CHECK_PROGS)
-	POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin=`pwd`/rsync$(EXEEXT) srcdir="$(srcdir)" $(srcdir)/runtests.sh
-
-wildtest.o: wildtest.c lib/wildmatch.c rsync.h
-wildtest$(EXEEXT): wildtest.o
-	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ wildtest.o @BUILD_POPT@ $(LIBS)
+	POSIXLY_CORRECT=1 TLS=`pwd`/tls rsync_bin=`pwd`/rsync srcdir="$(srcdir)" $(srcdir)/runtests.sh
 
 # This does *not* depend on building or installing: you can use it to
 # check a version installed from a binary or some other source tree,
 # if you want.
 
 installcheck: $(CHECK_PROGS)
-	POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/rsync$(EXEEXT)" srcdir="$(srcdir)" $(srcdir)/runtests.sh
+	POSIXLY_CORRECT=1 TLS=`pwd`/tls rsync_bin="$(bindir)/rsync" srcdir="$(srcdir)" $(srcdir)/runtests.sh
 
 # TODO: Add 'dist' target; need to know which files will be included
-
-# Run the SPLINT (Secure Programming Lint) tool.  <www.splint.org>
-.PHONY: splint
-splint:
-	splint +unixlib +gnuextensions -weak rsync.c
-
-
-rsync.dvi: doc/rsync.texinfo
-	texi2dvi -o $@ $<
-
-rsync.ps: rsync.dvi
-	dvips -ta4 -o $@ $<
-
-rsync.pdf: doc/rsync.texinfo
-	texi2dvi -o $@ --pdf $<
-
-
-doxygen:
-	cd $(srcdir) && rm dox/html/* && doxygen
-
-# for maintainers only
-doxygen-upload:
-	rsync -avzv $(srcdir)/dox/html/ --delete \
-	samba.org:/home/httpd/html/rsync/doxygen/head/

NEWS

@@ -1,181 +1,7 @@
-NEWS for rsync 2.6.5 (1 Jun 2005)
-Protocol: 29 (unchanged)
-Changes since 2.6.4:
+rsync 2.4.8 (26 Jan 2002)
 
-  OUTPUT CHANGES:
+  SECURITY FIXES:
 
-    - Non-printable chars in filenames are now output using backslash-
-      escaped characters rather than '?'s.  Any non-printable character is
-      output using 3 digits of octal (e.g. "\n" -> "\012"), and a backslash
-      is now output as "\\".  Rsync also uses your locale setting, which
-      can make it treat fewer high-bit characters as non-printable.
-
-    - If rsync received an empty file-list when pulling files, it would
-      output a "nothing to do" message and exit with a 0 (success) exit
-      status, even if the remote rsync returned an error (it did not do
-      this under the same conditions when pushing files).  This was changed
-      to make the pulling behavior the same as the pushing behavior:  we
-      now do the normal end-of-run outputting (depending on options) and
-      exit with the appropriate exit status.
-
-  BUG FIXES:
-
-    - A crash bug was fixed when a daemon had its "path" set to "/", did
-      not have chroot enabled, and used some anchored excludes in the
-      rsyncd.conf file.
-
-    - Fixed a bug in the transfer of a single file when -H is specified
-      (rsync would either infinite loop or perhaps crash).
-
-    - Fixed a case where the generator might try (and fail) to tweak the
-      write-permissions of a read-only directory in list-only mode (this
-      only caused an annoying warning message).
-
-    - If --compare-dest or --link-dest uses a locally-copied file as the
-      basis for an updated version, log this better when --verbose or -i
-      is in effect.
-
-    - Fixed the accidental disabling of --backup during the --delete-after
-      processing.
-
-    - Restored the ability to use the --address option in client mode (in
-      addition to its use in daemon mode).
-
-    - Make sure that some temporary progress information from the delete
-      processing does not get left on the screen when it is followed by a
-      newline.
-
-    - When --existing skips a directory with extra verbosity, refer to it
-      as a "directory", not a "file".
-
-    - When transferring a single file to a different-named file, any
-      generator messages that are source-file related no longer refer to
-      the file by the destination filename.
-
-    - Fixed a bug where hard-linking a group of files might fail if the
-      generator hasn't created a needed destination directory yet.
-
-    - Fixed a bug where a hard-linked group of files that is newly-linked
-      to a file in a --link-dest dir doesn't link the files from the rest
-      of the cluster.
-
-    - When deleting files with the --one-file-system (-x) option set, rsync
-      no longer tries to remove files from inside a mount-point on the
-      receiving side.  Also, we don't complain about being unable to remove
-      the mount-point dir.
-
-    - Fixed a compatibility problem when using --cvs-ignore (-C) and
-      sending files to an older rsync without using --delete.
-
-    - Make sure that a "- !" or "+ !" include/exclude pattern does not
-      trigger the list-clearing action that is reserved for "!".
-
-    - Avoid a timeout in the generator when the sender/receiver aren't
-      handling the generator's checksum output quickly enough.
-
-    - Fixed the omission of some directories in the delete processing when
-      --relative (-R) was combined with a source path that had a trailing
-      slash.
-
-    - Fixed a case where rsync would erroneously delete some files and then
-      re-transfer them when the options --relative (-R) and --recursive
-      (-r) were both enabled (along with --delete) and a source path had a
-      trailing slash.
-
-    - Make sure that --max-size doesn't affect a device or a symlink.
-
-    - Make sure that a system with a really small MAXPATHLEN does not cause
-      the buffers in readfd_unbuffered() to be too small to receive normal
-      messages.  (This mainly affected Cygwin.)
-
-    - If a source pathname ends with a filename of "..", treat it as if
-      "../" had been specified (so that we don't copy files to the parent
-      dir of the destination).
-
-    - If --delete is combined with a file-listing rsync command (i.e. no
-      transfer is happening), avoid outputting a warning that we couldn't
-      delete anything.
-
-    - If --stats is specified with --delete-after, ensure that all the
-      "deleting" messages are output before the statistics.
-
-    - Improved one "if" in the deletion code that was only checking errno
-      for ENOTEMPTY when it should have also been checking for EEXIST (for
-      compatibility with OS variations).
-
-  ENHANCEMENTS:
-
-    - Added the --only-write-batch=FILE option that may be used (instead
-      of --write-batch=FILE) to create a batch file without doing any
-      actual updating of the destination.  This allows you to divert all
-      the file-updating data away from a slow data link (as long as you
-      are pushing the data to the remote server when creating the batch).
-
-    - When the generator is taking a long time to fill up its output buffer
-      (e.g. if the transferred files are few, small, or missing), it now
-      periodically flushes the output buffer so that the sender/receiver
-      can get started on the files sooner rather than later.
-
-    - Improved the keep-alive code to handle a long silence between the
-      sender and the receiver that can occur when the sender is receiving
-      the checksum data for a large file.
-
-    - Improved the auth-errors that are logged by the daemon to include
-      some information on why the authorization failed:  wrong user,
-      password mismatch, etc.  (The client-visible message is unchanged!)
-
-    - Improved the client's handling of an "@ERROR" from a daemon so that
-      it does not complain about an unexpectedly closed socket (since we
-      really did expect the socket to close).
-
-    - If the daemon can't open the log-file specified in rsyncd.conf, fall
-      back to using syslog and log an appropriate warning.  This is better
-      than what was typically a totally silent (and fatal) failure (since a
-      daemon is not usually run with the --no-detach option that was
-      necessary to see the error on stderr).
-
-    - The man pages now consistently refer to an rsync daemon as a "daemon"
-      instead of a "server" (to distinguish it from the server process in a
-      non-daemon transfer).
-
-    - Made a small change to the rrsync script (restricted rsync -- in the
-      support dir) to make a read-only server reject all --remove-* options
-      when sending files (to future-proof it against the possibility of
-      other similar options being added at some point).
-
-  INTERNAL:
-
-    - Rsync now calls setlocale(LC_CTYPE, "").  This enables isprint() to
-      better discern which filename characters need to be escaped in
-      messages (which should result in fewer escaped characters in some
-      locales).
-
-    - Improved the naming of the log-file open/reopen/close functions.
-
-    - Removed some protocol-compatibility code that was only needed to help
-      someone running a pre-release of 2.6.4.
-
-  BUILD CHANGES:
-
-    - Added configure option "--disable-locale" to disable any use of
-      setlocale() in the binary.
-
-    - Fixed a bug in the SUPPORT{,_HARD}_LINKS #defines which prevented
-      rsync from being built without symlink or hard-link support.
-
-    - Only #define HAVE_REMSH if it is going to be set to 1.
-
-    - Configure now disables the use of mkstemp() under HP-UX (since they
-      refuse to fix its broken handling of large files).
-
-    - Configure now explicitly checks for the lseek64() function so that
-      the code can use HAVE_LSEEK64 instead of inferring lseek64()'s
-      presence based on the presence of the off64_t type.
-
-    - Configure no longer mentions the change in the default remote-shell
-      (from rsh to ssh) that occurred for the 2.6.0 release.
-
-    - Some minor enhancements to the test scripts.
-
-    - Added a few new *.diff files to the patches dir, including a patch
-      that enables the optional copying of extended attributes.
+    * Signedness security patch from Sebastian Krahmer
+      <krahmer@suse.de> -- in some cases we were not sufficiently
+      careful about reading integers from the network.

README

@@ -1,7 +1,7 @@
 WHAT IS RSYNC?
 --------------
 
-rsync is a replacement for scp/rcp that has many more features.
+rsync is a replacement for rcp that has many more features.
 
 rsync uses the "rsync algorithm" which provides a very fast method for
 bringing remote files into sync. It does this by sending just the
@@ -18,20 +18,81 @@ this package.
 USAGE
 -----
 
-Basically you use rsync just like rcp, but rsync has many additional
-options.  To get a complete list of supported options type
+Basically you use rsync just like rcp, but rsync has many additional options.
 
-  rsync --help
+Here is a brief description of rsync usage:
+
+Usage: rsync [OPTION]... SRC [SRC]... [USER@]HOST:DEST
+  or   rsync [OPTION]... [USER@]HOST:SRC DEST
+  or   rsync [OPTION]... SRC [SRC]... DEST
+  or   rsync [OPTION]... [USER@]HOST::SRC [DEST]
+  or   rsync [OPTION]... SRC [SRC]... [USER@]HOST::DEST
+  or   rsync [OPTION]... rsync://[USER@]HOST[:PORT]/SRC [DEST]
+SRC on single-colon remote HOST will be expanded by remote shell
+SRC on server remote HOST may contain shell wildcards or multiple
+  sources separated by space as long as they have same top-level
+
+Options
+ -v, --verbose               increase verbosity
+ -q, --quiet                 decrease verbosity
+ -c, --checksum              always checksum
+ -a, --archive               archive mode
+ -r, --recursive             recurse into directories
+ -R, --relative              use relative path names
+ -b, --backup                make backups (default ~ suffix)
+     --suffix=SUFFIX         override backup suffix
+ -u, --update                update only (don't overwrite newer files)
+ -l, --links                 preserve soft links
+ -L, --copy-links            treat soft links like regular files
+     --copy-unsafe-links     copy links outside the source tree
+     --safe-links            ignore links outside the destination tree
+ -H, --hard-links            preserve hard links
+ -p, --perms                 preserve permissions
+ -o, --owner                 preserve owner (root only)
+ -g, --group                 preserve group
+ -D, --devices               preserve devices (root only)
+ -t, --times                 preserve times
+ -S, --sparse                handle sparse files efficiently
+ -n, --dry-run               show what would have been transferred
+ -W, --whole-file            copy whole files, no incremental checks
+ -x, --one-file-system       don't cross filesystem boundaries
+ -B, --block-size=SIZE       checksum blocking size (default 700)
+ -e, --rsh=COMMAND           specify rsh replacement
+     --rsync-path=PATH       specify path to rsync on the remote machine
+ -C, --cvs-exclude           auto ignore files in the same way CVS does
+     --delete                delete files that don't exist on the sending side
+     --delete-excluded       also delete excluded files on the receiving side
+     --partial               keep partially transferred files
+     --force                 force deletion of directories even if not empty
+     --numeric-ids           don't map uid/gid values by user/group name
+     --timeout=TIME          set IO timeout in seconds
+ -I, --ignore-times          don't exclude files that match length and time
+     --size-only             only use file size when determining if a file should be transferred
+ -T  --temp-dir=DIR          create temporary files in directory DIR
+     --compare-dest=DIR      also compare destination files relative to DIR
+ -z, --compress              compress file data
+     --exclude=PATTERN       exclude files matching PATTERN
+     --exclude-from=FILE     exclude patterns listed in FILE
+     --include=PATTERN       don't exclude files matching PATTERN
+     --include-from=FILE     don't exclude patterns listed in FILE
+     --version               print version number
+     --daemon                run as a rsync daemon
+     --config=FILE           specify alternate rsyncd.conf file
+     --port=PORT             specify alternate rsyncd port number
+     --stats                 give some file transfer stats
+     --progress              show progress during transfer
+     --log-format=FORMAT     log file transfers using specified format
+     --password-file=FILE    get password from FILE
+ -h, --help                  show this help screen
 
-and see the manual for more information.
 
 
 SETUP
 -----
 
-Rsync normally uses ssh or rsh for communication.  It does not need to
+Rsync normally uses rsh or ssh for communication.  It does not need to
 be setuid and requires no special privileges for installation.  You
-must, however, have a working ssh or rsh system.  Using ssh is
+must, however, have a working rsh or ssh system. Using ssh is
 recommended for its security features.
 
 Alternatively, rsync can run in `daemon' mode, listening on a socket.
@@ -76,21 +137,13 @@ BUG REPORTS
 -----------
 
 If you have web access then please look at
+http://rsync.samba.org/rsync/ 
 
-  http://rsync.samba.org/
+This will give you access to the bug tracking system used by the
+developers of rsync and will allow you to look at other bug reports or
+submit a new bug report.
 
-That page contains links to the current bug list, and information on
-how to report a bug well.  You might also like to try searching the
-internet for the error message you've received, or looking in the
-mailing list archives at
-
-  http://mail-archive.com/rsync@lists.samba.org/
-
-To send a bug report, follow the instructions on the bug-tracking
-page of the web site.
-
-If you don't have web access, email your bug report to
-rsync@lists.samba.org.
+If you don't have web access then mail bug reports to rsync@samba.org.
 
 
 CVS TREE
@@ -105,7 +158,8 @@ recent version of cvs then use the following commands:
 
 	cvs -d :pserver:cvs@pserver.samba.org:/cvsroot co rsync
 
-Look at the cvs documentation for more details.
+Look at the cvs documentation, or http://samba.org/cvs.html, for more
+details.
 
 
 COPYRIGHT

TODO

@@ -1,86 +1,22 @@
 -*- indented-text -*-
 
-BUGS ---------------------------------------------------------------
-Do not rely on having a group called "nobody"
-
-FEATURES ------------------------------------------------------------
-Use chroot only if supported
-Allow supplementary groups in rsyncd.conf			2002/04/09
-Handling IPv6 on old machines
-Other IPv6 stuff:
-Add ACL support							2001/12/02
-Lazy directory creation
-proxy authentication						2002/01/23
-SOCKS								2002/01/23
-FAT support
-Allow forcing arbitrary permissions				2002/03/12
---diff						david.e.sewell	2002/03/15
-Add daemon --no-fork option
-Create more granular verbosity				jw	2003/05/15
-
-DOCUMENTATION --------------------------------------------------------
-Keep list of open issues and todos on the web site
-Perhaps redo manual as SGML
-
-LOGGING --------------------------------------------------------------
-Memory accounting
-Improve error messages
-Better statistics:					Rasmus	2002/03/08
-Perhaps flush stdout like syslog
-Log deamon sessions that just list modules
-Log child death on signal
-Log errors with function that reports process of origin
-verbose output					David Stein	2001/12/20
-internationalization
-
-DEVELOPMENT --------------------------------------------------------
-Handling duplicate names
-Use generic zlib						2002/02/25
-TDB:								2002/03/12
-Splint								2002/03/12
-
-PERFORMANCE ----------------------------------------------------------
-File list structure in memory
-Traverse just one directory at a time
-Allow skipping MD4 file_sum					2002/04/08
-Accelerate MD4
-
-TESTING --------------------------------------------------------------
-Torture test
-Cross-test versions						2001/08/22
-Test on kernel source
-Test large files
-Create mutator program for testing
-Create configure option to enable dangerous tests
-If tests are skipped, say why.
-Test daemon feature to disallow particular options.
-Create pipe program for testing
-Create test makefile target for some tests
-
-RELATED PROJECTS -----------------------------------------------------
-rsyncsh
-http://rsync.samba.org/rsync-and-debian/
-rsyncable gzip patch
-rsyncsplit as alternative to real integration with gzip?
-reverse rsync over HTTP Range
+URGENT ---------------------------------------------------------------
 
 
+IMPORTANT ------------------------------------------------------------
 
-BUGS ---------------------------------------------------------------
+Cross-test versions
 
+  Part of the regression suite should be making sure that we don't
+  break backwards compatibility: old clients vs new servers and so
+  on.  Ideally we would test the cross product of versions.  
 
-Do not rely on having a group called "nobody"
+  It might be sufficient to test downloads from well-known public
+  rsync servers running different versions of rsync.  This will give
+  some testing and also be the most common case for having different
+  versions and not being able to upgrade.
 
-  http://www.linuxbase.org/spec/refspecs/LSB_1.1.0/gLSB/usernames.html
-
-  On Debian it's "nogroup"
-
-                      --          --
-
-FEATURES ------------------------------------------------------------
-
-
-Use chroot only if supported
+use chroot
 
   If the platform doesn't support it, then don't even try.
 
@@ -90,51 +26,147 @@ Use chroot only if supported
     http://lists.samba.org/pipermail/rsync/2001-August/thread.html
     http://lists.samba.org/pipermail/rsync/2001-September/thread.html
 
-                      --          --
+--files-from
+
+  Avoids traversal.  Better option than a pile of --include statements
+  for people who want to generate the file list using a find(1)
+  command or a script.
 
 
-Allow supplementary groups in rsyncd.conf			2002/04/09
+Performance
 
-  Perhaps allow supplementary groups to be specified in rsyncd.conf;
-  then make the first one the primary gid and all the rest be
-  supplementary gids.
+  Traverse just one directory at a time.  Tridge says it's possible.
 
-                      --          --
+  At the moment rsync reads the whole file list into memory at the
+  start, which makes us use a lot of memory and also not pipeline
+  network access as much as we could.
 
 
-Handling IPv6 on old machines
+Handling duplicate names
 
-  The KAME IPv6 patch is nice in theory but has proved a bit of a
-  nightmare in practice.  The basic idea of their patch is that rsync
-  is rewritten to use the new getaddrinfo()/getnameinfo() interface,
-  rather than gethostbyname()/gethostbyaddr() as in rsync 2.4.6.
-  Systems that don't have the new interface are handled by providing
-  our own implementation in lib/, which is selectively linked in.
+  We need to be careful of duplicate names getting into the file list.
+  See clean_flist().  This could happen if multiple arguments include
+  the same file.  Bad.
 
-  The problem with this is that it is really hard to get right on
-  platforms that have a half-working implementation, so redefining
-  these functions clashes with system headers, and leaving them out
-  breaks.  This affects at least OSF/1, RedHat 5, and Cobalt, which
-  are moderately improtant.
+  I think duplicates are only a problem if they're both flowing
+  through the pipeline at the same time.  For example we might have
+  updated the first occurrence after reading the checksums for the
+  second.  So possibly we just need to make sure that we don't have
+  both in the pipeline at the same time.  
 
-  Perhaps the simplest solution would be to have two different files
-  implementing the same interface, and choose either the new or the
-  old API.  This is probably necessary for systems that e.g. have
-  IPv6, but gethostbyaddr() can't handle it.  The Linux manpage claims
-  this is currently the case.
+  Possibly if we did one directory at a time that would be sufficient.
 
-  In fact, our internal sockets interface (things like
-  open_socket_out(), etc) is much narrower than the getaddrinfo()
-  interface, and so probably simpler to get right.  In addition, the
-  old code is known to work well on old machines.
+  Alternatively we could pre-process the arguments to make sure no
+  duplicates will ever be inserted.  There could be some bad cases
+  when we're collapsing symlinks.
 
-  We could drop the rather large lib/getaddrinfo files.
+  We could have a hash table.
 
-                      --          --
+  The root of the problem is that we do not want more than one file
+  list entry referring to the same file.  At first glance there are
+  several ways this could happen: symlinks, hardlinks, and repeated
+  names on the command line.
+
+  If names are repeated on the command line, they may be present in
+  different forms, perhaps by traversing directory paths in different
+  ways, traversing paths including symlinks.  Also we need to allow
+  for expansion of globs by rsync.
+
+  At the moment, clean_flist() requires having the entire file list in
+  memory.  Duplicate names are detected just by a string comparison.
+
+  We don't need to worry about hard links causing duplicates because
+  files are never updated in place.  Similarly for symlinks.
+
+  I think even if we're using a different symlink mode we don't need
+  to worry.
+
+  Unless we're really clever this will introduce a protocol
+  incompatibility, so we need to be able to accept the old format as
+  well.
 
 
-Other IPv6 stuff:
-  
+Memory accounting
+
+  At exit, show how much memory was used for the file list, etc.
+
+  Also we do a wierd exponential-growth allocation in flist.c.  I'm
+  not sure this makes sense with modern mallocs.  At any rate it will
+  make us allocate a huge amount of memory for large file lists.
+
+  We can try using the GNU/SVID/XPG mallinfo() function to get some
+  heap statistics.
+
+
+Hard-link handling
+
+  At the moment hardlink handling is very expensive, so it's off by
+  default.  It does not need to be so.  
+
+  Since most of the solutions are rather intertwined with the file
+  list it is probably better to fix that first, although fixing
+  hardlinks is possibly simpler.
+
+  We can rule out hardlinked directories since they will probably
+  screw us up in all kinds of ways.  They simply should not be used.
+
+  At the moment rsync only cares about hardlinks to regular files.  I
+  guess you could also use them for sockets, devices and other beasts,
+  but I have not seen them.
+
+  When trying to reproduce hard links, we only need to worry about
+  files that have more than one name (nlinks>1 && !S_ISDIR). 
+
+  The basic point of this is to discover alternate names that refer to
+  the same file.  All operations, including creating the file and
+  writing modifications to it need only to be done for the first name.
+  For all later names, we just create the link and then leave it
+  alone.
+
+  If hard links are to be preserved:
+
+    Before the generator/receiver fork, the list of files is received
+    from the sender (recv_file_list), and a table for detecting hard
+    links is built.
+
+    The generator looks for hard links within the file list and does
+    not send checksums for them, though it does send other metadata.
+
+    The sender sends the device number and inode with file entries, so
+    that files are uniquely identified.
+
+    The receiver goes through and creates hard links (do_hard_links)
+    after all data has been written, but before directory permissions
+    are set.
+
+  At the moment device and inum are sent as 4-byte integers, which
+  will probably cause problems on large filesystems.  On Linux the
+  kernel uses 64-bit ino_t's internally, and people will soon have
+  filesystems big enough to use them.  We ought to follow NFS4 in
+  using 64-bit device and inode identification, perhaps with a
+  protocol version bump.
+
+  Once we've seen all the names for a particular file, we no longer
+  need to think about it and we can deallocate the memory.
+
+  We can also have the case where there are links to a file that are
+  not in the tree being transferred.  There's nothing we can do about
+  that.  Because we rename the destination into place after writing,
+  any hardlinks to the old file are always going to be orphaned.  In
+  fact that is almost necessary because otherwise we'd get really
+  confused if we were generating checksums for one name of a file and
+  modifying another.
+
+  At the moment the code seems to make a whole second copy of the file
+  list, which seems unnecessary.
+
+  We should have a test case that exercises hard links.  Since it
+  might be hard to compare ./tls output where the inodes change we
+  might need a little program to check whether several names refer to
+  the same file.
+
+IPv6
+
   Implement suggestions from http://www.kame.net/newsletter/19980604/
   and ftp://ftp.iij.ad.jp/pub/RFC/rfc2553.txt
 
@@ -146,163 +178,16 @@ Other IPv6 stuff:
   multiple passive addresses.  This might be a bit harder, because we
   may need to select on all of them.  Hm.
 
-                      --          --
+  Define a syntax for IPv6 literal addresses.  Since they include
+  colons, they tend to break most naming systems, including ours.
+  Based on the HTTP IPv6 syntax, I think we should use
+ 
+     rsync://[::1]/foo/bar
+     [::1]::bar
 
+  which should just take a small change to the parser code.
 
-Add ACL support							2001/12/02
-
-  Transfer ACLs.  Need to think of a standard representation.
-  Probably better not to even try to convert between NT and POSIX.
-  Possibly can share some code with Samba.
-  NOTE: there is a patch that implements this in the "patches" subdir.
-
-                      --          --
-
-
-Lazy directory creation
-
-  With the current common --include '*/' --exclude '*' pattern, people
-  can end up with many empty directories.  We might avoid this by
-  lazily creating such directories.
-
-                      --          --
-
-
-proxy authentication						2002/01/23
-
-  Allow RSYNC_PROXY to be http://user:pass@proxy.foo:3128/, and do
-  HTTP Basic Proxy-Authentication.
-
-  Multiple schemes are possible, up to and including the insanity that
-  is NTLM, but Basic probably covers most cases.
-
-                      --          --
-
-
-SOCKS								2002/01/23
-
-  Add --with-socks, and then perhaps a command-line option to put them
-  on or off.  This might be more reliable than LD_PRELOAD hacks.
-
-                      --          --
-
-
-FAT support
-
-  rsync to a FAT partition on a Unix machine doesn't work very well at
-  the moment.  I think we get errors about invalid filenames and
-  perhaps also trying to do atomic renames.
-
-  I guess the code to do this is currently #ifdef'd on Windows;
-  perhaps we ought to intelligently fall back to it on Unix too.
-
-                      --          --
-
-
-Allow forcing arbitrary permissions				2002/03/12
-
-  On 12 Mar 2002, Dave Dykstra <dwd@bell-labs.com> wrote:
-  > If we would add an option to do that functionality, I
-  > would vote for one that was more general which could mask
-  > off any set of permission bits and possibly add any set of
-  > bits.  Perhaps a chmod-like syntax if it could be
-  > implemented simply.
-
-  I think that would be good too.  For example, people uploading files
-  to a web server might like to say
-
-  rsync -avzP --chmod a+rX ./ sourcefrog.net:/home/www/sourcefrog/
-
-  Ideally the patch would implement as many of the gnu chmod semantics
-  as possible.  I think the mode parser should be a separate function
-  that passes back something like (mask,set) description to the rest
-  of the program.  For bonus points there would be a test case for the
-  parser.
-
-  Possibly also --chown
-
-  (Debian #23628)
-
-  NOTE: there is a patch that implements this in the "patches" subdir.
-
-                      --          --
-
-
---diff						david.e.sewell	2002/03/15
-
-  Allow people to specify the diff command.  (Might want to use wdiff,
-  gnudiff, etc.)
-
-  Just diff the temporary file with the destination file, and delete
-  the tmp file rather than moving it into place.
-
-  Interaction with --partial.
-
-  Security interactions with daemon mode?
-
-                      --          --
-
-
-Add daemon --no-fork option
-
-  Very useful for debugging.  Also good when running under a
-  daemon-monitoring process that tries to restart the service when the
-  parent exits.
-
-                      --          --
-
-
-Create more granular verbosity				jw	2003/05/15
-
-  Control output with the --report option.
-
-  The option takes as a single argument (no whitespace) a
-  comma delimited lists of keywords.
-
-  This would separate debugging from "logging" as well as
-  fine grained selection of statistical reporting and what
-  actions are logged.
-
-  http://lists.samba.org/archive/rsync/2003-May/006059.html
-
-                      --          --
-
-DOCUMENTATION --------------------------------------------------------
-
-
-Keep list of open issues and todos on the web site
-
-                      --          --
-
-
-Perhaps redo manual as SGML
-
-  The man page is getting rather large, and there is more information
-  that ought to be added.
-
-  TexInfo source is probably a dying format.
-
-  Linuxdoc looks like the most likely contender.  I know DocBook is
-  favoured by some people, but it's so bloody verbose, even with emacs
-  support.
-
-                      --          --
-
-LOGGING --------------------------------------------------------------
-
-
-Memory accounting
-
-  At exit, show how much memory was used for the file list, etc.
-
-  Also we do a wierd exponential-growth allocation in flist.c.  I'm
-  not sure this makes sense with modern mallocs.  At any rate it will
-  make us allocate a huge amount of memory for large file lists.
-
-                      --          --
-
-
-Improve error messages
+Errors
 
   If we hang or get SIGINT, then explain where we were up to.  Perhaps
   have a static buffer that contains the current function name, or
@@ -311,310 +196,109 @@ Improve error messages
 
   "The dungeon collapses!  You are killed."  Rather than "unexpected
   eof" give a message that is more detailed if possible and also more
-  helpful.
+  helpful.  
 
-  If we get an error writing to a socket, then we should perhaps
-  continue trying to read to see if an error message comes across
-  explaining why the socket is closed.  I'm not sure if this would
-  work, but it would certainly make our messages more helpful.
+File attributes
 
-  What happens if a directory is missing -x attributes.  Do we lose
-  our load?  (Debian #28416) Probably fixed now, but a test case would
-  be good.
+  Device major/minor numbers should be at least 32 bits each.  See
+  http://lists.samba.org/pipermail/rsync/2001-November/005357.html
 
-  When running as a daemon, some errors should both be returned to the
-  user and logged.  This will make interacting with a daemon less
-  cryptic.
+  Transfer ACLs.  Need to think of a standard representation.
+  Probably better not to even try to convert between NT and POSIX.
+  Possibly can share some code with Samba.
 
-                      --          --
+Empty directories
 
+  With the current common --include '*/' --exclude '*' pattern, people
+  can end up with many empty directories.  We might avoid this by
+  lazily creating such directories.
 
-Better statistics:					Rasmus	2002/03/08
+zlib
 
-  <Rasmus>
-      hey, how about an rsync option that just gives you the
-      summary without the list of files?  And perhaps gives
-      more information like the number of new files, number
-      of changed, deleted, etc. ?
+  Perhaps don't use our own zlib.  Will we actually be incompatible,
+  or just be slightly less efficient?
 
-  <mbp>
-      nice idea there is --stats but at the moment it's very
-      tridge-oriented rather than user-friendly it would be
-      nice to improve it that would also work well with
-      --dryrun
-
-                      --          --
-
-
-Perhaps flush stdout like syslog
+logging
 
   Perhaps flush stdout after each filename, so that people trying to
   monitor progress in a log file can do so more easily.  See
   http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=48108
 
-                      --          --
-
-
-Log deamon sessions that just list modules
-
   At the connections that just get a list of modules are not logged,
   but they should be.
 
-                      --          --
+rsyncd over ssh
 
+  There are already some patches to do this.
 
-Log child death on signal
+proxy authentication
 
-  If a child of the rsync daemon dies with a signal, we should notice
-  that when we reap it and log a message.
+  Allow RSYNC_PROXY to be http://user:pass@proxy.foo:3128/, and do
+  HTTP Basic Proxy-Authentication.  
 
-                      --          --
+  Multiple schemes are possible, up to and including the insanity that
+  is NTLM, but Basic probably covers most cases.
 
+SOCKS
 
-Log errors with function that reports process of origin
+  Add --with-socks, and then perhaps a command-line option to put them
+  on or off.  This might be more reliable than LD_PRELOAD hacks.
 
-  Use a separate function for reporting errors; prefix it with
-  "rsync:" or "rsync(remote)", or perhaps even "rsync(local
-  generator): ".
+PLATFORMS ------------------------------------------------------------
 
-                      --          --
+Win32
 
+  Don't detach, because this messes up --srvany.
 
-verbose output					David Stein	2001/12/20
+  http://sources.redhat.com/ml/cygwin/2001-08/msg00234.html
+
+  According to "Effective TCP/IP Programming" (??) close() on a socket
+  has incorrect behaviour on Windows -- it sends a RST packet to the
+  other side, which gives a "connection reset by peer" error.  On that
+  platform we should probably do shutdown() instead.  However, on Unix
+  we are correct to call close(), because shutdown() discards
+  untransmitted data.
+
+DOCUMENTATION --------------------------------------------------------
+
+Update README
+
+BUILD FARM -----------------------------------------------------------
+
+Add machines
+
+  AMDAHL UTS (Dave Dykstra)
+
+  Cygwin (on different versions of Win32?)
+
+  HP-UX variants (via HP?)
+
+  SCO
+
+NICE -----------------------------------------------------------------
+
+--no-detach and --no-fork options
+
+  Very useful for debugging.  Also good when running under a
+  daemon-monitoring process that tries to restart the service when the
+  parent exits.
+
+hang/timeout friendliness
+
+verbose output
   
-  At end of transfer, show how many files were or were not transferred
-  correctly.
-
-                      --          --
-
+  Indicate whether files are new, updated, or deleted
 
 internationalization
 
   Change to using gettext().  Probably need to ship this for platforms
-  that don't have it.
+  that don't have it.  
 
   Solicit translations.
 
-  Does anyone care?  Before we bother modifying the code, we ought to
-  get the manual translated first, because that's possibly more useful
-  and at any rate demonstrates desire.
+  Does anyone care?
 
-                      --          --
-
-DEVELOPMENT --------------------------------------------------------
-
-Handling duplicate names
-
-  Some folks would like rsync to be deterministic in how it handles
-  duplicate names that come from mering multiple source directories
-  into a single destination directory; e.g. the last name wins.  We
-  could do this by switching our sort algorithm to one that will
-  guarantee that the names won't be reordered.  Alternately, we could
-  assign an ever-increasing number to each item as we insert it into
-  the list and then make sure that we leave the largest number when
-  cleaning the file list (see clean_flist()).  Another solution would
-  be to add a hash table, and thus never put any duplicate names into
-  the file list (and bump the protocol to handle this).
-
-                      --          --
-
-
-Use generic zlib						2002/02/25
-
-  Perhaps don't use our own zlib.
-
-  Advantages:
-   
-    - will automatically be up to date with bugfixes in zlib
-
-    - can leave it out for small rsync on e.g. recovery disks
-
-    - can use a shared library
-
-    - avoids people breaking rsync by trying to do this themselves and
-      messing up
-
-  Should we ship zlib for systems that don't have it, or require
-  people to install it separately?
-
-  Apparently this will make us incompatible with versions of rsync
-  that use the patched version of rsync.  Probably the simplest way to
-  do this is to just disable gzip (with a warning) when talking to old
-  versions.
-
-                      --          --
-
-
-TDB:								2002/03/12
-
-  Rather than storing the file list in memory, store it in a TDB.
-
-  This *might* make memory usage lower while building the file list.
-
-  Hashtable lookup will mean files are not transmitted in order,
-  though... hm.
-
-  This would neatly eliminate one of the major post-fork shared data
-  structures.
-
-                      --          --
-
-
-Splint								2002/03/12
-
-  Build rsync with SPLINT to try to find security holes.  Add
-  annotations as necessary.  Keep track of the number of warnings
-  found initially, and see how many of them are real bugs, or real
-  security bugs.  Knowing the percentage of likely hits would be
-  really interesting for other projects.
-
-                      --          --
-
-PERFORMANCE ----------------------------------------------------------
-
-File list structure in memory
-
-  Rather than one big array, perhaps have a tree in memory mirroring
-  the directory tree.
-
-  This might make sorting much faster!  (I'm not sure it's a big CPU
-  problem, mind you.)
-
-  It might also reduce memory use in storing repeated directory names
-  -- again I'm not sure this is a problem.
-
-                      --          --
-
-
-Traverse just one directory at a time
-
-  Traverse just one directory at a time.  Tridge says it's possible.
-
-  At the moment rsync reads the whole file list into memory at the
-  start, which makes us use a lot of memory and also not pipeline
-  network access as much as we could.
-
-                      --          --
-
-
-Allow skipping MD4 file_sum					2002/04/08
-
-  If we're doing a local transfer, or using -W, then perhaps don't
-  send the file checksum.  If we're doing a local transfer, then
-  calculating MD4 checksums uses 90% of CPU and is unlikely to be
-  useful.
-
-  We should not allow it to be disabled separately from -W, though
-  as it is the only thing that lets us know when the rsync algorithm
-  got out of sync and messed the file up (i.e. if the basis file
-  changed between checksum generation and reception).
-
-                      --          --
-
-
-Accelerate MD4
-
-  Perhaps borrow an assembler MD4 from someone?
-
-  Make sure we call MD4 with properly-sized blocks whenever possible
-  to avoid copying into the residue region?
-
-                      --          --
-
-TESTING --------------------------------------------------------------
-
-Torture test
-
-  Something that just keeps running rsync continuously over a data set
-  likely to generate problems.
-
-                      --          --
-
-
-Cross-test versions						2001/08/22
-
-  Part of the regression suite should be making sure that we
-  don't break backwards compatibility: old clients vs new
-  servers and so on.  Ideally we would test both up and down
-  from the current release to all old versions.
-
-  Run current rsync versions against significant past releases.
-
-  We might need to omit broken old versions, or versions in which
-  particular functionality is broken
-
-  It might be sufficient to test downloads from well-known public
-  rsync servers running different versions of rsync.  This will give
-  some testing and also be the most common case for having different
-  versions and not being able to upgrade.
-
-  The new --protocol option may help in this.
-
-                      --          --
-
-
-Test on kernel source
-
-  Download all versions of kernel; unpack, sync between them.  Also
-  sync between uncompressed tarballs.  Compare directories after
-  transfer.
-
-  Use local mode; ssh; daemon; --whole-file and --no-whole-file.
-
-  Use awk to pull out the 'speedup' number for each transfer.  Make
-  sure it is >= x.
-
-                      --          --
-
-
-Test large files
-
-  Sparse and non-sparse
-
-                      --          --
-
-
-Create mutator program for testing
-
-  Insert bytes, delete bytes, swap blocks, ...
-
-                      --          --
-
-
-Create configure option to enable dangerous tests
-
-                      --          --
-
-
-If tests are skipped, say why.
-
-                      --          --
-
-
-Test daemon feature to disallow particular options.
-
-                      --          --
-
-
-Create pipe program for testing
-
-  Create pipe program that makes slow/jerky connections for
-  testing Versions of read() and write() that corrupt the
-  stream, or abruptly fail
-
-                      --          --
-
-
-Create test makefile target for some tests
-
-  Separate makefile target to run rough tests -- or perhaps
-  just run them every time?
-
-                      --          --
-
-RELATED PROJECTS -----------------------------------------------------
-
-rsyncsh
+rsyncsh 
 
    Write a small emulation of interactive ftp as a Pythonn program
    that calls rsync.  Commands such as "cd", "ls", "ls *.c" etc map
@@ -622,37 +306,4 @@ rsyncsh
    current host, directory and so on.  We can probably even do
    completion of remote filenames.
 
-                      --          --
-
-
-http://rsync.samba.org/rsync-and-debian/
-
-
-                      --          --
-
-
-rsyncable gzip patch
-
-  Exhaustive, tortuous testing
-
-  Cleanups?
-
-                      --          --
-
-
-rsyncsplit as alternative to real integration with gzip?
-
-                      --          --
-
-
-reverse rsync over HTTP Range
-
-  Goswin Brederlow suggested this on Debian; I think tridge and I
-  talked about it previous in relation to rproxy.
-
-  Addendum:  It looks like someone is working on a version of this:
-
-    http://zsync.moria.org.uk/
-
-                      --          --
-
+%K%

access.c

@@ -26,192 +26,58 @@
 
 static int match_hostname(char *host, char *tok)
 {
-	if (!host || !*host)
-		return 0;
-	return wildmatch(tok, host);
+	if (!host || !*host) return 0;
+	return (fnmatch(tok, host, 0) == 0);
 }
 
-static int match_binary(char *b1, char *b2, char *mask, int addrlen)
-{
-	int i;
-
-	for (i = 0; i < addrlen; i++) {
-		if ((b1[i] ^ b2[i]) & mask[i])
-			return 0;
-	}
-
-	return 1;
-}
-
-static void make_mask(char *mask, int plen, int addrlen)
-{
-	int w, b;
-
-	w = plen >> 3;
-	b = plen & 0x7;
-
-	if (w)
-		memset(mask, 0xff, w);
-	if (w < addrlen)
-		mask[w] = 0xff & (0xff<<(8-b));
-	if (w+1 < addrlen)
-		memset(mask+w+1, 0, addrlen-w-1);
-
-	return;
-}
 
 static int match_address(char *addr, char *tok)
 {
 	char *p;
-	struct addrinfo hints, *resa, *rest;
-	int gai;
-	int ret = 0;
-	int addrlen = 0;
-#ifdef HAVE_STRTOL
-	long int bits;
-#else
-	int bits;
-#endif
-	char mask[16];
-	char *a = NULL, *t = NULL;
-	unsigned int len;
+	unsigned long a, t, mask = (unsigned long)~0;
 
-	if (!addr || !*addr)
-		return 0;
+	if (!addr || !*addr) return 0;
+
+	if (!isdigit(tok[0])) return 0;
 
 	p = strchr(tok,'/');
+	if (p) *p = 0;
+
+	a = inet_addr(addr);
+	t = inet_addr(tok);
+
 	if (p) {
-		*p = '\0';
-		len = p - tok;
-	} else
-		len = strlen(tok);
+		*p = '/';
+	}
 
-	/* Fail quietly if tok is a hostname (not an address) */
-	if (strspn(tok, ".0123456789") != len
-#ifdef INET6
-	    && strchr(tok, ':') == NULL
-#endif
-	) {
-		if (p)
-			*p = '/';
+	if (t == INADDR_NONE) {
+		rprintf(FERROR,"malformed address %s\n", tok);
 		return 0;
 	}
 
-	memset(&hints, 0, sizeof(hints));
-	hints.ai_family = PF_UNSPEC;
-	hints.ai_socktype = SOCK_STREAM;
-#ifdef AI_NUMERICHOST
-	hints.ai_flags = AI_NUMERICHOST;
-#endif
+	a = ntohl(a);
+	t = ntohl(t);
 
-	if (getaddrinfo(addr, NULL, &hints, &resa) != 0) {
-		if (p)
-			*p = '/';
-		return 0;
-	}
-
-	gai = getaddrinfo(tok, NULL, &hints, &rest);
-	if (p)
-		*p++ = '/';
-	if (gai != 0) {
-		rprintf(FLOG, "error matching address %s: %s\n",
-			tok, gai_strerror(gai));
-		freeaddrinfo(resa);
-		return 0;
-	}
-
-	if (rest->ai_family != resa->ai_family) {
-		ret = 0;
-		goto out;
-	}
-
-	switch(resa->ai_family) {
-	case PF_INET:
-		a = (char *)&((struct sockaddr_in *)resa->ai_addr)->sin_addr;
-		t = (char *)&((struct sockaddr_in *)rest->ai_addr)->sin_addr;
-		addrlen = 4;
-
-		break;
-
-#ifdef INET6
-	case PF_INET6:
-	    {
-		struct sockaddr_in6 *sin6a, *sin6t;
-
-		sin6a = (struct sockaddr_in6 *)resa->ai_addr;
-		sin6t = (struct sockaddr_in6 *)rest->ai_addr;
-
-		a = (char *)&sin6a->sin6_addr;
-		t = (char *)&sin6t->sin6_addr;
-
-		addrlen = 16;
-
-#ifdef HAVE_SOCKADDR_IN6_SCOPE_ID
-		if (sin6t->sin6_scope_id &&
-		    sin6a->sin6_scope_id != sin6t->sin6_scope_id) {
-			ret = 0;
-			goto out;
-		}
-#endif
-
-		break;
-	    }
-#endif
-	default:
-	    rprintf(FLOG, "unknown family %u\n", rest->ai_family);
-	    ret = 0;
-	    goto out;
-	}
-
-	bits = -1;
 	if (p) {
-		if (inet_pton(resa->ai_addr->sa_family, p, mask) <= 0) {
-#ifdef HAVE_STRTOL
-			char *ep = NULL;
-#else
-			unsigned char *pp;
-#endif
-
-#ifdef HAVE_STRTOL
-			bits = strtol(p, &ep, 10);
-			if (!*p || *ep) {
-				rprintf(FLOG, "malformed mask in %s\n", tok);
-				ret = 0;
-				goto out;
+		if (strchr(p+1,'.')) {
+			mask = inet_addr(p+1);
+			if (mask == INADDR_NONE) {
+				rprintf(FERROR,"malformed mask in %s\n", tok);
+				return 0;
 			}
-#else
-			for (pp = (unsigned char *)p; *pp; pp++) {
-				if (!isascii(*pp) || !isdigit(*pp)) {
-					rprintf(FLOG, "malformed mask in %s\n", tok);
-					ret = 0;
-					goto out;
-				}
-			}
-			bits = atoi(p);
-#endif
-			if (bits == 0) {
-				ret = 1;
-				goto out;
-			}
-			if (bits < 0 || bits > (addrlen << 3)) {
-				rprintf(FLOG, "malformed mask in %s\n", tok);
-				ret = 0;
-				goto out;
+			mask = ntohl(mask);
+		} else {
+			int bits = atoi(p+1);
+			if (bits == 0) return 1;
+			if (bits <= 0 || bits > 32) {
+				rprintf(FERROR,"malformed mask in %s\n", tok);
+				return 0;
 			}
+			mask &= (mask << (32-bits));
 		}
-	} else {
-		bits = 128;
 	}
 
-	if (bits >= 0)
-		make_mask(mask, bits, addrlen);
-
-	ret = match_binary(a, t, mask, addrlen);
-
-out:
-	freeaddrinfo(resa);
-	freeaddrinfo(rest);
-	return ret;
+	return ((a&mask) == (t&mask));
 }
 
 static int access_match(char *list, char *addr, char *host)
@@ -219,14 +85,12 @@ static int access_match(char *list, char *addr, char *host)
 	char *tok;
 	char *list2 = strdup(list);
 
-	if (!list2)
-		out_of_memory("access_match");
+	if (!list2) out_of_memory("access_match");
 
 	strlower(list2);
-	if (host)
-		strlower(host);
+	if (host) strlower(host);
 
-	for (tok = strtok(list2, " ,\t"); tok; tok = strtok(NULL, " ,\t")) {
+	for (tok=strtok(list2," ,\t"); tok; tok=strtok(NULL," ,\t")) {
 		if (match_hostname(host, tok) || match_address(addr, tok)) {
 			free(list2);
 			return 1;
@@ -239,25 +103,29 @@ static int access_match(char *list, char *addr, char *host)
 
 int allow_access(char *addr, char *host, char *allow_list, char *deny_list)
 {
-	if (allow_list && !*allow_list)
-		allow_list = NULL;
-	if (deny_list && !*deny_list)
-		deny_list = NULL;
+	/* if theres no deny list and no allow list then allow access */
+	if ((!deny_list || !*deny_list) && (!allow_list || !*allow_list))
+		return 1;
 
-	/* If we match an allow-list item, we always allow access. */
-	if (allow_list) {
-		if (access_match(allow_list, addr, host))
-			return 1;
-		/* For an allow-list w/o a deny-list, disallow non-matches. */
-		if (!deny_list)
-			return 0;
-	}
+	/* if there is an allow list but no deny list then allow only hosts
+	   on the allow list */
+	if (!deny_list || !*deny_list)
+		return(access_match(allow_list, addr, host));
 
-	/* If we match a deny-list item (and got past any allow-list
-	 * items), we always disallow access. */
-	if (deny_list && access_match(deny_list, addr, host))
+	/* if theres a deny list but no allow list then allow
+	   all hosts not on the deny list */
+	if (!allow_list || !*allow_list)
+		return(!access_match(deny_list,addr,host));
+
+	/* if there are both type of list then allow all hosts on the
+           allow list */
+	if (access_match(allow_list,addr,host))
+		return 1;
+
+	/* if there are both type of list and it's not on the allow then
+	   allow it if its not on the deny */
+	if (access_match(deny_list,addr,host))
 		return 0;
 
-	/* Allow all other access. */
 	return 1;
 }

acconfig.h

@@ -0,0 +1,10 @@
+#undef ino_t
+#undef HAVE_CONNECT
+#undef HAVE_SHORT_INO_T
+#undef HAVE_GETOPT_LONG
+#undef REPLACE_INET_NTOA
+#undef REPLACE_INET_ATON
+#undef HAVE_GETTIMEOFDAY_TZ
+#undef ENABLE_IPV6
+#undef HAVE_SOCKADDR_LEN
+#undef HAVE_SOCKETPAIR

authenticate.c

@@ -1,17 +1,17 @@
 /* -*- c-file-style: "linux"; -*-
-
-   Copyright (C) 1998-2000 by Andrew Tridgell
-
+   
+   Copyright (C) 1998-2000 by Andrew Tridgell 
+   
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
-
+   
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
+   
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
@@ -20,14 +20,11 @@
 /* support rsync authentication */
 #include "rsync.h"
 
-extern char *password_file;
-extern int am_root;
-
 /***************************************************************************
 encode a buffer using base64 - simple and slow algorithm. null terminates
 the result.
   ***************************************************************************/
-void base64_encode(char *buf, int len, char *out)
+static void base64_encode(char *buf, int len, char *out)
 {
 	char *b64 = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
 	int bit_offset, byte_offset, idx, i;
@@ -36,7 +33,7 @@ void base64_encode(char *buf, int len, char *out)
 
 	memset(out, 0, bytes+1);
 
-	for (i = 0; i < bytes; i++) {
+	for (i=0;i<bytes;i++) {
 		byte_offset = (i*6)/8;
 		bit_offset = (i*6)%8;
 		if (bit_offset < 3) {
@@ -51,14 +48,13 @@ void base64_encode(char *buf, int len, char *out)
 	}
 }
 
-/* Generate a challenge buffer and return it base64-encoded. */
+/* create a 16 byte challenge buffer */
 static void gen_challenge(char *addr, char *challenge)
 {
 	char input[32];
-	char md4_out[MD4_SUM_LENGTH];
 	struct timeval tv;
 
-	memset(input, 0, sizeof input);
+	memset(input, 0, sizeof(input));
 
 	strlcpy((char *)input, addr, 17);
 	sys_gettimeofday(&tv);
@@ -66,249 +62,228 @@ static void gen_challenge(char *addr, char *challenge)
 	SIVAL(input, 20, tv.tv_usec);
 	SIVAL(input, 24, getpid());
 
-	sum_init(0);
-	sum_update(input, sizeof input);
-	sum_end(md4_out);
-
-	base64_encode(md4_out, MD4_SUM_LENGTH, challenge);
+	sum_init();
+	sum_update(input, sizeof(input));
+	sum_end(challenge);
 }
 
 
-/* Return the secret for a user from the secret file, null terminated.
- * Maximum length is len (not counting the null). */
+/* return the secret for a user from the sercret file. maximum length
+   is len. null terminate it */
 static int get_secret(int module, char *user, char *secret, int len)
 {
 	char *fname = lp_secrets_file(module);
+	int fd, found=0;
+	char line[MAXPATHLEN];
+	char *p, *pass=NULL;
 	STRUCT_STAT st;
-	int fd, ok = 1;
-	char ch, *p;
+	int ok = 1;
+	extern int am_root;
 
-	if (!fname || !*fname)
-		return 0;
+	if (!fname || !*fname) return 0;
 
-	if ((fd = open(fname, O_RDONLY)) < 0)
-		return 0;
+	fd = open(fname,O_RDONLY);
+	if (fd == -1) return 0;
 
 	if (do_stat(fname, &st) == -1) {
-		rsyserr(FLOG, errno, "stat(%s)", safe_fname(fname));
+		rsyserr(FERROR, errno, "stat(%s)", fname);
 		ok = 0;
 	} else if (lp_strict_modes(module)) {
 		if ((st.st_mode & 06) != 0) {
-			rprintf(FLOG, "secrets file must not be other-accessible (see strict modes option)\n");
+			rprintf(FERROR,"secrets file must not be other-accessible (see strict modes option)\n");
 			ok = 0;
 		} else if (am_root && (st.st_uid != 0)) {
-			rprintf(FLOG, "secrets file must be owned by root when running as root (see strict modes)\n");
+			rprintf(FERROR,"secrets file must be owned by root when running as root (see strict modes)\n");
 			ok = 0;
 		}
 	}
 	if (!ok) {
-		rprintf(FLOG, "continuing without secrets file\n");
+		rprintf(FERROR,"continuing without secrets file\n");
 		close(fd);
 		return 0;
 	}
 
-	if (*user == '#') {
-		/* Reject attempt to match a comment. */
-		close(fd);
-		return 0;
+	while (!found) {
+		int i = 0;
+		memset(line, 0, sizeof line);
+		while ((size_t) i < (sizeof(line)-1)) {
+			if (read(fd, &line[i], 1) != 1) {
+				memset(line, 0, sizeof(line));
+				close(fd);
+				return 0;
+			}
+			if (line[i] == '\r') continue;
+			if (line[i] == '\n') break;
+			i++;
+		}
+		line[i] = 0;
+		if (line[0] == '#') continue;
+		p = strchr(line,':');
+		if (!p) continue;
+		*p = 0;
+		if (strcmp(user, line)) continue;
+		pass = p+1;
+		found = 1;
 	}
 
-	/* Try to find a line that starts with the user name and a ':'. */
-	p = user;
-	while (1) {
-		if (read(fd, &ch, 1) != 1) {
-			close(fd);
-			return 0;
-		}
-		if (ch == '\n')
-			p = user;
-		else if (p) {
-			if (*p == ch)
-				p++;
-			else if (!*p && ch == ':')
-				break;
-			else
-				p = NULL;
-		}
-	}
-
-	/* Slurp the secret into the "secret" buffer. */
-	p = secret;
-	while (len > 0) {
-		if (read(fd, p, 1) != 1 || *p == '\n')
-			break;
-		if (*p == '\r')
-			continue;
-		p++;
-		len--;
-	}
-	*p = '\0';
 	close(fd);
+	if (!found) return 0;
 
+	strlcpy(secret, pass, len);
 	return 1;
 }
 
 static char *getpassf(char *filename)
 {
+	char buffer[100];
+	int fd=0;
 	STRUCT_STAT st;
-	char buffer[512], *p;
-	int fd, n, ok = 1;
-	char *envpw = getenv("RSYNC_PASSWORD");
+	int ok = 1;
+	extern int am_root;
+	char *envpw=getenv("RSYNC_PASSWORD");
 
-	if (!filename)
-		return NULL;
+	if (!filename) return NULL;
 
-	if ((fd = open(filename,O_RDONLY)) < 0) {
-		rsyserr(FERROR, errno, "could not open password file \"%s\"",
-			safe_fname(filename));
-		if (envpw)
-			rprintf(FERROR, "falling back to RSYNC_PASSWORD environment variable.\n");
+	if ( (fd=open(filename,O_RDONLY)) == -1) {
+		rsyserr(FERROR, errno, "could not open password file \"%s\"",filename);
+		if (envpw) rprintf(FERROR,"falling back to RSYNC_PASSWORD environment variable.\n");	
 		return NULL;
 	}
-
+	
 	if (do_stat(filename, &st) == -1) {
-		rsyserr(FERROR, errno, "stat(%s)", safe_fname(filename));
+		rsyserr(FERROR, errno, "stat(%s)", filename);
 		ok = 0;
 	} else if ((st.st_mode & 06) != 0) {
 		rprintf(FERROR,"password file must not be other-accessible\n");
 		ok = 0;
-	} else if (am_root && st.st_uid != 0) {
+	} else if (am_root && (st.st_uid != 0)) {
 		rprintf(FERROR,"password file must be owned by root when running as root\n");
 		ok = 0;
 	}
 	if (!ok) {
 		rprintf(FERROR,"continuing without password file\n");
-		if (envpw)
-			rprintf(FERROR, "using RSYNC_PASSWORD environment variable.\n");
+		if (envpw) rprintf(FERROR,"using RSYNC_PASSWORD environment variable.\n");
 		close(fd);
 		return NULL;
 	}
 
-	if (envpw)
-		rprintf(FERROR, "RSYNC_PASSWORD environment variable ignored\n");
+	if (envpw) rprintf(FERROR,"RSYNC_PASSWORD environment variable ignored\n");
 
-	n = read(fd, buffer, sizeof buffer - 1);
-	close(fd);
-	if (n > 0) {
-		buffer[n] = '\0';
-		if ((p = strtok(buffer, "\n\r")) != NULL)
-			return strdup(p);
-	}
+	buffer[sizeof(buffer)-1]='\0';
+	if (read(fd,buffer,sizeof(buffer)-1) > 0)
+	{
+		char *p = strtok(buffer,"\n\r");
+		close(fd);
+		if (p) p = strdup(p);
+		return p;
+	}	
 
 	return NULL;
 }
 
-/* Generate an MD4 hash created from the combination of the password
- * and the challenge string and return it base64-encoded. */
+/* generate a 16 byte hash from a password and challenge */
 static void generate_hash(char *in, char *challenge, char *out)
 {
-	char buf[MD4_SUM_LENGTH];
+	char buf[16];
 
-	sum_init(0);
+	sum_init();
 	sum_update(in, strlen(in));
 	sum_update(challenge, strlen(challenge));
 	sum_end(buf);
 
-	base64_encode(buf, MD4_SUM_LENGTH, out);
+	base64_encode(buf, 16, out);
 }
 
-/* Possibly negotiate authentication with the client.  Use "leader" to
- * start off the auth if necessary.
- *
- * Return NULL if authentication failed.  Return "" if anonymous access.
- * Otherwise return username.
- */
-char *auth_server(int f_in, int f_out, int module, char *host, char *addr,
-		  char *leader)
+/* possible negotiate authentication with the client. Use "leader" to
+   start off the auth if necessary 
+
+   return NULL if authentication failed
+
+   return "" if anonymous access
+
+   otherwise return username
+*/
+char *auth_server(int fd, int module, char *addr, char *leader)
 {
 	char *users = lp_auth_users(module);
-	char challenge[MD4_SUM_LENGTH*2];
+	char challenge[16];
+	char b64_challenge[30];
 	char line[MAXPATHLEN];
-	char secret[512];
-	char pass2[MD4_SUM_LENGTH*2];
-	char *tok, *pass;
+	static char user[100];
+	char secret[100];
+	char pass[30];
+	char pass2[30];
+	char *tok;
 
 	/* if no auth list then allow anyone in! */
-	if (!users || !*users)
-		return "";
+	if (!users || !*users) return "";
 
 	gen_challenge(addr, challenge);
+	
+	base64_encode(challenge, 16, b64_challenge);
 
-	io_printf(f_out, "%s%s\n", leader, challenge);
+	io_printf(fd,"%s%s\n", leader, b64_challenge);
 
-	if (!read_line(f_in, line, sizeof line - 1)
-	 || (pass = strchr(line, ' ')) == NULL) {
-		rprintf(FLOG, "auth failed on module %s from %s (%s): "
-			"invalid challenge response\n",
-			lp_name(module), host, addr);
+	if (!read_line(fd, line, sizeof(line)-1)) {
 		return NULL;
 	}
-	*pass++ = '\0';
 
-	if (!(users = strdup(users)))
-		out_of_memory("auth_server");
+	memset(user, 0, sizeof(user));
+	memset(pass, 0, sizeof(pass));
 
-	for (tok = strtok(users, " ,\t"); tok; tok = strtok(NULL, " ,\t")) {
-		if (wildmatch(tok, line))
-			break;
+	if (sscanf(line,"%99s %29s", user, pass) != 2) {
+		return NULL;
+	}
+	
+	users = strdup(users);
+	if (!users) return NULL;
+
+	for (tok=strtok(users," ,\t"); tok; tok = strtok(NULL," ,\t")) {
+		if (fnmatch(tok, user, 0) == 0) break;
 	}
 	free(users);
 
 	if (!tok) {
-		rprintf(FLOG, "auth failed on module %s from %s (%s): "
-			"unauthorized user\n",
-			lp_name(module), host, addr);
+		return NULL;
+	}
+	
+	memset(secret, 0, sizeof(secret));
+	if (!get_secret(module, user, secret, sizeof(secret)-1)) {
+		memset(secret, 0, sizeof(secret));
 		return NULL;
 	}
 
-	memset(secret, 0, sizeof secret);
-	if (!get_secret(module, line, secret, sizeof secret - 1)) {
-		memset(secret, 0, sizeof secret);
-		rprintf(FLOG, "auth failed on module %s from %s (%s): "
-			"missing secret for user \"%s\"\n",
-			lp_name(module), host, addr, line);
-		return NULL;
-	}
+	generate_hash(secret, b64_challenge, pass2);
+	memset(secret, 0, sizeof(secret));
+	
+	if (strcmp(pass, pass2) == 0)
+		return user;
 
-	generate_hash(secret, challenge, pass2);
-	memset(secret, 0, sizeof secret);
-
-	if (strcmp(pass, pass2) != 0) {
-		rprintf(FLOG, "auth failed on module %s from %s (%s): "
-			"password mismatch\n",
-			lp_name(module), host, addr);
-		return NULL;
-	}
-
-	return strdup(line);
+	return NULL;
 }
 
 
 void auth_client(int fd, char *user, char *challenge)
 {
 	char *pass;
-	char pass2[MD4_SUM_LENGTH*2];
+	char pass2[30];
+	extern char *password_file;
 
-	if (!user || !*user)
-		user = "nobody";
+	if (!user || !*user) return;
 
-	if (!(pass = getpassf(password_file))
-	 && !(pass = getenv("RSYNC_PASSWORD"))) {
+	if (!(pass=getpassf(password_file)) && !(pass=getenv("RSYNC_PASSWORD"))) {
 		/* XXX: cyeoh says that getpass is deprecated, because
-		 * it may return a truncated password on some systems,
-		 * and it is not in the LSB.
-                 *
-                 * Andrew Klein says that getpassphrase() is present
-                 * on Solaris and reads up to 256 characters.
-                 *
-                 * OpenBSD has a readpassphrase() that might be more suitable.
-                 */
+		   it may return a truncated password on some systems,
+		   and it is not in the LSB. */
 		pass = getpass("Password: ");
 	}
 
-	if (!pass)
+	if (!pass || !*pass) {
 		pass = "";
+	}
 
 	generate_hash(pass, challenge, pass2);
 	io_printf(fd, "%s %s\n", user, pass2);
 }
+
+

backup.c

@@ -1,16 +1,16 @@
-/*
+/* 
    Copyright (C) Andrew Tridgell 1999
-
+   
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
-
+   
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
+   
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
@@ -21,259 +21,271 @@
 #include "rsync.h"
 
 extern int verbose;
-extern int backup_suffix_len;
-extern int backup_dir_len;
-extern unsigned int backup_dir_remainder;
-extern char backup_dir_buf[MAXPATHLEN];
 extern char *backup_suffix;
 extern char *backup_dir;
 
+
 extern int am_root;
 extern int preserve_devices;
 extern int preserve_links;
 extern int preserve_hard_links;
-extern int orig_umask;
-extern int safe_symlinks;
-
-/* make a complete pathname for backup file */
-char *get_backup_name(char *fname)
-{
-	if (backup_dir) {
-		if (stringjoin(backup_dir_buf + backup_dir_len, backup_dir_remainder,
-			       fname, backup_suffix, NULL) < backup_dir_remainder)
-			return backup_dir_buf;
-	} else {
-		if (stringjoin(backup_dir_buf, MAXPATHLEN,
-			       fname, backup_suffix, NULL) < MAXPATHLEN)
-			return backup_dir_buf;
-	}
-
-	rprintf(FERROR, "backup filename too long\n");
-	return NULL;
-}
 
 /* simple backup creates a backup with a suffix in the same directory */
 static int make_simple_backup(char *fname)
 {
-	int rename_errno;
-	char *fnamebak = get_backup_name(fname);
-
-	if (!fnamebak)
-		return 0;
-
-	while (1) {
-		if (do_rename(fname, fnamebak) == 0) {
-			if (verbose > 1) {
-				rprintf(FINFO, "backed up %s to %s\n",
-					safe_fname(fname),
-					safe_fname(fnamebak));
-			}
-			break;
-		}
-		/* cygwin (at least version b19) reports EINVAL */
-		if (errno == ENOENT || errno == EINVAL)
-			break;
-
-		rename_errno = errno;
-		if (errno == EISDIR && do_rmdir(fnamebak) == 0)
-			continue;
-		if (errno == ENOTDIR && do_unlink(fnamebak) == 0)
-			continue;
-
-		rsyserr(FERROR, rename_errno, "rename %s to backup %s",
-			safe_fname(fname), safe_fname(fnamebak));
-		errno = rename_errno;
+	char fnamebak[MAXPATHLEN];
+	if (strlen(fname) + strlen(backup_suffix) > (MAXPATHLEN-1)) {
+		rprintf(FERROR,"backup filename too long\n");
 		return 0;
 	}
 
+	snprintf(fnamebak,sizeof(fnamebak),"%s%s",fname,backup_suffix);
+	if (do_rename(fname,fnamebak) != 0) {
+		/* cygwin (at least version b19) reports EINVAL */
+		if (errno != ENOENT && errno != EINVAL) {
+			rsyserr(FERROR, errno, "rename %s to backup %s", fname, fnamebak);
+			return 0;
+		}
+	} else if (verbose > 1) {
+		rprintf(FINFO,"backed up %s to %s\n",fname,fnamebak);
+	}
 	return 1;
 }
 
 
+/* recursively make a directory path */
+static int make_dir(char *name, int mask)
+{
+	char newdir [MAXPATHLEN];
+	char *p, *d;
+
+	/* copy pathname over, look for last '/' */
+	for (p = d = newdir; *name; *d++ = *name++)
+		if (*name == '/')
+			p = d;
+	if (p == newdir)
+		return 0;
+	*p = 0;
+
+	/* make the new directory, if that fails then make its parent */
+	while (do_mkdir (newdir, mask) != 0)
+		if ((errno != ENOENT) || !make_dir (newdir, mask))
+			return 0;
+
+	return 1;
+} /* make_dir */
+
+
 /****************************************************************************
 Create a directory given an absolute path, perms based upon another directory
 path
 ****************************************************************************/
-static int make_bak_dir(char *fullpath)
+static int make_bak_dir(char *fname,char *bak_path)
 {
-	STRUCT_STAT st;
-	char *rel = fullpath + backup_dir_len;
-	char *end = rel + strlen(rel);
-	char *p = end;
+        STRUCT_STAT st;
+        STRUCT_STAT *st2;
+        char fullpath[MAXPATHLEN];
+        extern int orig_umask;
+        char *p;
+        char *q;
 
-	while (strncmp(fullpath, "./", 2) == 0)
-		fullpath += 2;
+        while(strncmp(bak_path,"./",2)==0) bak_path += 2;
 
-	/* Try to find an existing dir, starting from the deepest dir. */
-	while (1) {
-		if (--p == fullpath) {
-			p += strlen(p);
-			goto failure;
-		}
-		if (*p == '/') {
-			*p = '\0';
-			if (do_mkdir(fullpath, 0777 & ~orig_umask) == 0)
-				break;
-			if (errno != ENOENT) {
-				rsyserr(FERROR, errno,
-					"make_bak_dir mkdir %s failed",
-					full_fname(fullpath));
-				goto failure;
-			}
-		}
-	}
+        if(bak_path[strlen(bak_path)-1]!='/') {
+                snprintf(fullpath,sizeof(fullpath),"%s/",bak_path);
+        } else {
+                snprintf(fullpath,sizeof(fullpath),"%s",bak_path);
+        }
+        p=fullpath;
+        q=&fullpath[strlen(fullpath)];  /* End of bak_path string */
+        strcat(fullpath,fname);
 
-	/* Make all the dirs that we didn't find on the way here. */
-	while (1) {
-		if (p >= rel) {
-			/* Try to transfer the directory settings of the
-			 * actual dir that the files are coming from. */
-			if (do_stat(rel, &st) < 0) {
-				rsyserr(FERROR, errno,
-					"make_bak_dir stat %s failed",
-					full_fname(rel));
-			} else {
-				do_lchown(fullpath, st.st_uid, st.st_gid);
-				do_chmod(fullpath, st.st_mode);
-			}
-		}
-		*p = '/';
-		p += strlen(p);
-		if (p == end)
-			break;
-		if (do_mkdir(fullpath, 0777 & ~orig_umask) < 0) {
-			rsyserr(FERROR, errno, "make_bak_dir mkdir %s failed",
-				full_fname(fullpath));
-			goto failure;
-		}
-	}
-	return 0;
-
-failure:
-	while (p != end) {
-		*p = '/';
-		p += strlen(p);
-	}
-	return -1;
+        /* Make the directories */
+        while ((p=strchr(p,'/'))) {
+                *p = 0;
+                if(do_lstat(fullpath,&st)!=0) {
+                        do_mkdir(fullpath,0777 & ~orig_umask);
+                        if(p>q) {
+                                if(do_lstat(q,&st)!=0) {
+                                        rprintf(FERROR,"make_bak_dir stat %s : %s\n",fullpath,strerror(errno));
+                                } else {
+                                        st2=&st;
+                                        set_modtime(fullpath,st2->st_mtime);
+                                        if(do_lchown(fullpath,st2->st_uid,st2->st_gid)!=0) {
+                                                rprintf(FERROR,"make_bak_dir chown %s : %s\n",fullpath,strerror(errno));
+                                        };
+                                        if(do_chmod(fullpath,st2->st_mode)!=0) {
+                                                rprintf(FERROR,"make_bak_dir failed to set permissions on %s : %s\n",fullpath,strerror(errno));
+                                        };
+                                };
+                        }
+                };
+                *p = '/';
+                p++;
+        }
+        return 0;
 }
 
 /* robustly move a file, creating new directory structures if necessary */
 static int robust_move(char *src, char *dst)
 {
-	if (robust_rename(src, dst, 0755) < 0 && (errno != ENOENT
-	    || make_bak_dir(dst) < 0 || robust_rename(src, dst, 0755) < 0))
-		return -1;
-	return 0;
-}
+	int keep_trying = 4;
+	int keep_path_extfs = 0;
+	int failed;
+
+	while (keep_trying) {
+		if (keep_path_extfs) {
+			failed = copy_file(src, dst, 0755);
+			if (!failed) {
+				do_unlink(src);
+			}
+		} else {
+			failed = robust_rename (src, dst);
+		}
+
+		if (failed) {
+			if (verbose > 2)
+				rprintf (FERROR, "robust_move failed: %s(%d)\n",
+					strerror (errno), errno);
+			switch (errno) {
+				/* external filesystem */
+				case EXDEV:
+					keep_path_extfs = 1;
+					keep_trying--;
+					break;
+				/* no directory to write to */
+				case ENOENT:
+					make_dir (dst, 0755);
+					keep_trying--;
+					break;
+				default:
+					keep_trying = 0;
+			} /* switch */
+		} else
+			keep_trying = 0;
+	} /* while */
+	return (!failed);
+} /* robust_move */
 
 
-/* If we have a --backup-dir, then we get here from make_backup().
- * We will move the file to be deleted into a parallel directory tree. */
+/* if we have a backup_dir, then we get here from make_backup().
+   We will move the file to be deleted into a parallel directory tree */
 static int keep_backup(char *fname)
 {
+
+	static int initialised;
+
+	char keep_name [MAXPATHLEN];
 	STRUCT_STAT st;
 	struct file_struct *file;
-	char *buf;
-	int kept = 0;
+
+	int kept=0;
 	int ret_code;
 
+	if (!initialised) {
+		if (backup_dir[strlen(backup_dir) - 1] == '/')
+			backup_dir[strlen(backup_dir) - 1] = 0;
+		if (verbose > 0)
+			rprintf (FINFO, "backup_dir is %s\n", backup_dir);
+		initialised = 1;
+	}
+
 	/* return if no file to keep */
-	if (do_lstat(fname, &st) < 0)
-		return 1;
-
-	if (!(file = make_file(fname, NULL, NO_FILTERS)))
-		return 1; /* the file could have disappeared */
-
-	if (!(buf = get_backup_name(fname)))
-		return 0;
-
-	/* Check to see if this is a device file, or link */
-	if (IS_DEVICE(file->mode)) {
-		if (am_root && preserve_devices) {
-			if (do_mknod(buf, file->mode, file->u.rdev) < 0
-			    && (errno != ENOENT || make_bak_dir(buf) < 0
-			     || do_mknod(buf, file->mode, file->u.rdev) < 0)) {
-				rsyserr(FERROR, errno, "mknod %s failed",
-					full_fname(buf));
-			} else if (verbose > 2) {
-				rprintf(FINFO,
-					"make_backup: DEVICE %s successful.\n",
-					safe_fname(fname));
-			}
-		}
-		kept = 1;
-		do_unlink(fname);
-	}
-
-	if (!kept && S_ISDIR(file->mode)) {
-		/* make an empty directory */
-		if (do_mkdir(buf, file->mode) < 0
-		    && (errno != ENOENT || make_bak_dir(buf) < 0
-		     || do_mkdir(buf, file->mode) < 0)) {
-			rsyserr(FINFO, errno, "mkdir %s failed",
-				full_fname(buf));
-		}
-
-		ret_code = do_rmdir(fname);
-		if (verbose > 2) {
-			rprintf(FINFO, "make_backup: RMDIR %s returns %i\n",
-				full_fname(fname), ret_code);
-		}
-		kept = 1;
-	}
-
-#ifdef SUPPORT_LINKS
-	if (!kept && preserve_links && S_ISLNK(file->mode)) {
-		if (safe_symlinks && unsafe_symlink(file->u.link, buf)) {
-			if (verbose) {
-				rprintf(FINFO, "ignoring unsafe symlink %s -> %s\n",
-					full_fname(buf), file->u.link);
-			}
-			kept = 1;
-		}
-		if (do_symlink(file->u.link, buf) < 0
-		    && (errno != ENOENT || make_bak_dir(buf) < 0
-		     || do_symlink(file->u.link, buf) < 0)) {
-			rsyserr(FERROR, errno, "link %s -> \"%s\"",
-				full_fname(buf), safe_fname(file->u.link));
-		}
-		do_unlink(fname);
-		kept = 1;
-	}
+#if SUPPORT_LINKS
+	if (do_lstat (fname, &st)) return 1;
+#else
+	if (do_stat (fname, &st)) return 1;
 #endif
 
-	if (!kept && !S_ISREG(file->mode)) {
-		rprintf(FINFO, "make_bak: skipping non-regular file %s\n",
-			safe_fname(fname));
-		return 1;
-	}
+	file = make_file(-1, fname, NULL, 1);
+
+	/* the file could have disappeared */
+	if (!file) return 1;
+
+        /* make a complete pathname for backup file */
+        if (strlen(backup_dir) + strlen(fname) > (MAXPATHLEN - 1)) {
+                rprintf (FERROR, "keep_backup filename too long\n");
+                return 0;
+        }
+
+        snprintf(keep_name, sizeof (keep_name), "%s/%s", backup_dir, fname);
+
+
+#ifdef HAVE_MKNOD
+	/* Check to see if this is a device file, or link */
+        if(IS_DEVICE(file->mode)) {
+                if(am_root && preserve_devices) {
+                        make_bak_dir(fname,backup_dir);
+                        if(do_mknod(keep_name,file->mode,file->rdev)!=0) {
+                                rprintf(FERROR,"mknod %s : %s\n",keep_name,strerror(errno));
+                        } else {
+                                if(verbose>2)
+                                        rprintf(FINFO,"make_backup : DEVICE %s successful.\n",fname);
+                        };
+                };
+		kept=1;
+                do_unlink(fname);
+        };
+#endif
+
+	if(!kept && S_ISDIR(file->mode)) {
+		/* make an empty directory */
+                make_bak_dir(fname,backup_dir);
+                do_mkdir(keep_name,file->mode);
+                ret_code=do_rmdir(fname);
+                if(verbose>2)
+                        rprintf(FINFO,"make_backup : RMDIR %s returns %i\n",fname,ret_code);
+		kept=1;
+        };
+
+#if SUPPORT_LINKS
+        if(!kept && preserve_links && S_ISLNK(file->mode)) {
+                extern int safe_symlinks;
+                if (safe_symlinks && unsafe_symlink(file->link, keep_name)) {
+                        if (verbose) {
+                                rprintf(FINFO,"ignoring unsafe symlink %s -> %s\n",
+                                        keep_name,file->link);
+                        }
+			kept=1;
+                }
+                make_bak_dir(fname,backup_dir);
+                if(do_symlink(file->link,keep_name) != 0) {
+                        rprintf(FERROR,"link %s -> %s : %s\n",keep_name,file->link,strerror(errno));
+                };
+                do_unlink(fname);
+		kept=1;
+        };
+#endif
+        if(!kept && preserve_hard_links && check_hard_link(file)) {
+                if(verbose > 1) rprintf(FINFO,"%s is a hard link\n",f_name(file));
+        };
+
+        if(!kept && !S_ISREG(file->mode)) {
+                rprintf(FINFO,"make_bak: skipping non-regular file %s\n",fname);
+        }
 
 	/* move to keep tree if a file */
-	if (!kept) {
-		if (robust_move(fname, buf) != 0) {
-			rsyserr(FERROR, errno, "keep_backup failed: %s -> \"%s\"",
-				full_fname(fname), safe_fname(buf));
-		} else if (st.st_nlink > 1) {
-			/* If someone has hard-linked the file into the backup
-			 * dir, rename() might return success but do nothing! */
-			robust_unlink(fname); /* Just in case... */
-		}
-	}
-	set_perms(buf, file, NULL, 0);
-	free(file);
+	if(!kept) {
+		if (!robust_move (fname, keep_name))
+			rprintf(FERROR, "keep_backup failed %s -> %s : %s\n",
+				fname, keep_name, strerror(errno));
+	};
+	set_perms (keep_name, file, NULL, 0);
+	free_file (file);
+	free (file);
 
-	if (verbose > 1) {
-		rprintf(FINFO, "backed up %s to %s\n",
-			safe_fname(fname), safe_fname(buf));
-	}
+	if (verbose > 1)
+		rprintf (FINFO, "keep_backup %s -> %s\n", fname, keep_name);
 	return 1;
-}
+} /* keep_backup */
 
 
 /* main backup switch routine */
 int make_backup(char *fname)
 {
 	if (backup_dir)
-		return keep_backup(fname);
-	return make_simple_backup(fname);
+		return (keep_backup(fname));
+	else
+		return (make_simple_backup(fname));
 }
+

batch.c

@@ -1,5 +1,5 @@
 /* -*- c-file-style: "linux" -*-
-
+   
    Weiss 1/1999
    Batch utilities for rsync.
 
@@ -8,197 +8,567 @@
 #include "rsync.h"
 #include <time.h>
 
-extern int am_sender;
-extern int eol_nulls;
-extern int recurse;
-extern int xfer_dirs;
-extern int preserve_links;
-extern int preserve_hard_links;
-extern int preserve_devices;
-extern int preserve_uid;
-extern int preserve_gid;
-extern int always_checksum;
-extern int do_compression;
-extern int protocol_version;
-extern char *batch_name;
+char rsync_flist_file[27] = "rsync_flist.";
+char rsync_csums_file[27] = "rsync_csums.";
+char rsync_delta_file[27] = "rsync_delta.";
+char rsync_argvs_file[27] = "rsync_argvs.";
 
-extern struct filter_list_struct filter_list;
+char batch_file_ext[15];
 
-static int *flag_ptr[] = {
-	&recurse,		/* 0 */
-	&preserve_uid,		/* 1 */
-	&preserve_gid,		/* 2 */
-	&preserve_links,	/* 3 */
-	&preserve_devices,	/* 4 */
-	&preserve_hard_links,	/* 5 */
-	&always_checksum,	/* 6 */
-	&xfer_dirs,		/* 7 (protocol 29) */
-	&do_compression,	/* 8 (protocol 29) */
-	NULL
-};
+int fdb;
+int fdb_delta;
+int fdb_open;
+int fdb_close;
 
-static char *flag_name[] = {
-	"--recurse (-r)",
-	"--owner (-o)",
-	"--group (-g)",
-	"--links (-l)",
-	"--devices (-D)",
-	"--hard-links (-H)",
-	"--checksum (-c)",
-	"--dirs (-d)",
-	"--compress (-z)",
-	NULL
-};
+struct file_list *batch_flist;
 
-void write_stream_flags(int fd)
+void create_batch_file_ext()
 {
-	int i, flags;
+	struct tm *timeptr;
+	time_t elapsed_seconds;
 
-	/* Start the batch file with a bitmap of data-stream-affecting
-	 * flags. */
-	if (protocol_version < 29)
-		flag_ptr[7] = NULL;
-	for (i = 0, flags = 0; flag_ptr[i]; i++) {
-		if (*flag_ptr[i])
-			flags |= 1 << i;
-	}
-	write_int(fd, flags);
+	/* Save run date and time to use for batch file extensions */
+	time(&elapsed_seconds);
+	timeptr = localtime(&elapsed_seconds);
+
+	sprintf(batch_file_ext, "%4d%02d%02d%02d%02d%02d",
+		timeptr->tm_year + 1900, timeptr->tm_mon + 1,
+		timeptr->tm_mday, timeptr->tm_hour, timeptr->tm_min,
+		timeptr->tm_sec);
+	rprintf(FINFO,"batch file extension: %s\n", batch_file_ext);
 }
 
-void read_stream_flags(int fd)
+void set_batch_file_ext(char *ext)
 {
-	int i, flags;
+	strcpy(batch_file_ext, ext);
+}
 
-	if (protocol_version < 29)
-		flag_ptr[7] = NULL;
-	for (i = 0, flags = read_int(fd); flag_ptr[i]; i++) {
-		int set = flags & (1 << i) ? 1 : 0;
-		if (*flag_ptr[i] != set) {
-			if (verbose) {
-				rprintf(FINFO,
-					"%sing the %s option to match the batchfile.\n",
-					set ? "Sett" : "Clear", flag_name[i]);
-			}
-			*flag_ptr[i] = set;
+void write_batch_flist_file(char *buff, int bytes_to_write)
+{
+
+	if (fdb_open) {
+		/* Set up file extension */
+		strcat(rsync_flist_file, batch_file_ext);
+
+		/* Open batch flist file for writing; create it if it doesn't exist */
+		fdb =
+		    do_open(rsync_flist_file, O_WRONLY | O_CREAT | O_TRUNC,
+			    S_IREAD | S_IWRITE);
+		if (fdb == -1) {
+			rprintf(FERROR, "Batch file %s open error: %s\n",
+				rsync_flist_file, strerror(errno));
+			close(fdb);
+			exit_cleanup(1);
 		}
-	}
-	if (protocol_version < 29) {
-		if (recurse)
-			xfer_dirs |= 1;
-		else if (xfer_dirs < 2)
-			xfer_dirs = 0;
-	}
-}
-
-static void write_arg(int fd, char *arg)
-{
-	char *x, *s;
-
-	if (*arg == '-' && (x = strchr(arg, '=')) != NULL) {
-		write(fd, arg, x - arg + 1);
-		arg += x - arg + 1;
+		fdb_open = 0;
 	}
 
-	if (strpbrk(arg, " \"'&;|[]()$#!*?^\\") != NULL) {
-		write(fd, "'", 1);
-		for (s = arg; (x = strchr(s, '\'')) != NULL; s = x + 1) {
-			write(fd, s, x - s + 1);
-			write(fd, "'", 1);
-		}
-		write(fd, s, strlen(s));
-		write(fd, "'", 1);
-		return;
-	}
+	/* Write buffer to batch flist file */
 
-	write(fd, arg, strlen(arg));
-}
-
-static void write_filter_rules(int fd)
-{
-	struct filter_struct *ent;
-
-	write_sbuf(fd, " <<'#E#'\n");
-	for (ent = filter_list.head; ent; ent = ent->next) {
-		unsigned int plen;
-		char *p = get_rule_prefix(ent->match_flags, "- ", 0, &plen);
-		write_buf(fd, p, plen);
-		write_sbuf(fd, ent->pattern);
-		if (ent->match_flags & MATCHFLG_DIRECTORY)
-			write_byte(fd, '/');
-		write_byte(fd, eol_nulls ? 0 : '\n');
-	}
-	if (eol_nulls)
-		write_sbuf(fd, ";\n");
-	write_sbuf(fd, "#E#");
-}
-
-/* This routine tries to write out an equivalent --read-batch command
- * given the user's --write-batch args.  However, it doesn't really
- * understand most of the options, so it uses some overly simple
- * heuristics to munge the command line into something that will
- * (hopefully) work. */
-void write_batch_shell_file(int argc, char *argv[], int file_arg_cnt)
-{
-	int fd, i, len;
-	char *p, filename[MAXPATHLEN];
-
-	stringjoin(filename, sizeof filename,
-		   batch_name, ".sh", NULL);
-	fd = do_open(filename, O_WRONLY | O_CREAT | O_TRUNC,
-		     S_IRUSR | S_IWUSR | S_IEXEC);
-	if (fd < 0) {
-		rsyserr(FERROR, errno, "Batch file %s open error",
-			safe_fname(filename));
+	if (write(fdb, buff, bytes_to_write) == -1) {
+		rprintf(FERROR, "Batch file %s write error: %s\n",
+			rsync_flist_file, strerror(errno));
+		close(fdb);
 		exit_cleanup(1);
 	}
 
-	/* Write argvs info to BATCH.sh file */
-	write_arg(fd, argv[0]);
-	if (filter_list.head) {
-		if (protocol_version >= 29)
-			write_sbuf(fd, " --filter=._-");
-		else
-			write_sbuf(fd, " --exclude-from=-");
+
+	if (fdb_close) {
+		close(fdb);
 	}
-	for (i = 1; i < argc - file_arg_cnt; i++) {
-		p = argv[i];
-		if (strncmp(p, "--files-from", 12) == 0
-		    || strncmp(p, "--filter", 8) == 0
-		    || strncmp(p, "--include", 9) == 0
-		    || strncmp(p, "--exclude", 9) == 0) {
-			if (strchr(p, '=') == NULL)
-				i++;
-			continue;
+}
+
+void write_batch_flist_info(int flist_count, struct file_struct **fptr)
+{
+	int i;
+	int bytes_to_write;
+
+	/* Write flist info to batch file */
+
+	bytes_to_write =
+	    sizeof(unsigned) +
+	    sizeof(time_t) +
+	    sizeof(OFF_T) +
+	    sizeof(mode_t) +
+	    sizeof(INO64_T) +
+	    sizeof(DEV64_T) +
+	    sizeof(DEV64_T) +
+	    sizeof(uid_t) +
+	    sizeof(gid_t);
+
+	fdb_open = 1;
+	fdb_close = 0;
+
+	for (i = 0; i < flist_count; i++) {
+		write_batch_flist_file((char *) fptr[i], bytes_to_write);
+		write_char_bufs(fptr[i]->basename);
+		write_char_bufs(fptr[i]->dirname);
+		write_char_bufs(fptr[i]->basedir);
+		write_char_bufs(fptr[i]->link);
+		if (i == flist_count - 1) {
+			fdb_close = 1;
 		}
-		if (strcmp(p, "-f") == 0) {
-			i++;
-			continue;
-		}
-		write(fd, " ", 1);
-		if (strncmp(p, "--write-batch", len = 13) == 0
-		 || strncmp(p, "--only-write-batch", len = 18) == 0) {
-			write(fd, "--read-batch", 12);
-			if (p[len] == '=') {
-				write(fd, "=", 1);
-				write_arg(fd, p + len + 1);
-			}
-		} else
-			write_arg(fd, p);
+		write_char_bufs(fptr[i]->sum);
 	}
-	if (!(p = check_for_hostspec(argv[argc - 1], &p, &i)))
-		p = argv[argc - 1];
-	write(fd, " ${1:-", 6);
-	write_arg(fd, p);
-	write_byte(fd, '}');
-	if (filter_list.head)
-		write_filter_rules(fd);
-	if (write(fd, "\n", 1) != 1 || close(fd) < 0) {
-		rsyserr(FERROR, errno, "Batch file %s write error",
-			safe_fname(filename));
+
+}
+
+void write_char_bufs(char *buf)
+{
+	/* Write the size of the string which will follow  */
+
+	char b[4];
+	if (buf != NULL)
+		SIVAL(b, 0, strlen(buf));
+	else {
+		SIVAL(b, 0, 0);
+	}
+
+	write_batch_flist_file(b, sizeof(int));
+
+	/*  Write the string if there is one */
+
+	if (buf != NULL) {
+		write_batch_flist_file(buf, strlen(buf));
+	}
+}
+
+void write_batch_argvs_file(int argc, char *argv[])
+{
+	int fdb;
+	int i;
+	char buff[256];
+
+	strcat(rsync_argvs_file, batch_file_ext);
+
+
+	/* Open batch argvs file for writing; create it if it doesn't exist */
+	fdb = do_open(rsync_argvs_file, O_WRONLY | O_CREAT | O_TRUNC,
+		      S_IREAD | S_IWRITE | S_IEXEC);
+	if (fdb == -1) {
+		rprintf(FERROR, "Batch file %s open error: %s\n",
+			rsync_argvs_file, strerror(errno));
+		close(fdb);
+		exit_cleanup(1);
+	}
+	buff[0] = '\0';
+	/* Write argvs info to batch file */
+
+	for (i = 0; i < argc; ++i) {
+		if (i == argc - 2)
+		    continue;
+		/*
+		 * FIXME:
+		 * I think directly manipulating argv[] is probably bogus
+		 */
+		if (!strcmp(argv[i], "--write-batch")) {
+			/* Safer to change it here than script */
+			/* Change to --read-batch + ext * to get ready for remote */
+			strlcat(buff, "--read-batch ", sizeof(buff));
+			strlcat(buff, batch_file_ext, sizeof(buff));
+		} else {
+			strlcat(buff, argv[i], sizeof(buff));
+		}
+
+		if (i < (argc - 1)) {
+			strlcat(buff, " ", sizeof(buff));
+		}
+	}
+	strlcat(buff, "\n", sizeof(buff));
+	if (!write(fdb, buff, strlen(buff))) {
+		rprintf(FERROR, "Batch file %s write error: %s\n",
+			rsync_argvs_file, strerror(errno));
+		close(fdb);
+		exit_cleanup(1);
+	}
+	close(fdb);
+}
+
+struct file_list *create_flist_from_batch()
+{
+	unsigned char flags;
+
+	fdb_open = 1;
+	fdb_close = 0;
+
+	batch_flist = (struct file_list *) malloc(sizeof(batch_flist[0]));
+	if (!batch_flist) {
+		out_of_memory("create_flist_from_batch");
+	}
+	batch_flist->count = 0;
+	batch_flist->malloced = 1000;
+	batch_flist->files =
+	    (struct file_struct **) malloc(sizeof(batch_flist->files[0]) *
+					   batch_flist->malloced);
+	if (!batch_flist->files) {
+		out_of_memory("create_flist_from_batch");	/* dw -- will exit */
+	}
+
+	for (flags = read_batch_flags(); flags; flags = read_batch_flags()) {
+
+		int i = batch_flist->count;
+
+		if (i >= batch_flist->malloced) {
+			if (batch_flist->malloced < 1000)
+				batch_flist->malloced += 1000;
+			else
+				batch_flist->malloced *= 2;
+			batch_flist->files =
+			    (struct file_struct **) realloc(batch_flist->
+							    files,
+							    sizeof
+							    (batch_flist->
+							     files[0]) *
+							    batch_flist->
+							    malloced);
+			if (!batch_flist->files)
+				out_of_memory("create_flist_from_batch");
+		}
+		read_batch_flist_info(&batch_flist->files[i]);
+		batch_flist->files[i]->flags = flags;
+
+		batch_flist->count++;
+	}
+
+	return batch_flist;
+
+}
+
+int read_batch_flist_file(char *buff, int len)
+{
+	int bytes_read;
+
+	if (fdb_open) {
+
+		/*  Set up file extension  */
+		strcat(rsync_flist_file, batch_file_ext);
+
+		/* Open batch flist file for reading */
+		fdb = do_open(rsync_flist_file, O_RDONLY, 0);
+		if (fdb == -1) {
+			rprintf(FERROR, "Batch file %s open error: %s\n",
+				rsync_flist_file, strerror(errno));
+			close(fdb);
+			exit_cleanup(1);
+		}
+		fdb_open = 0;
+	}
+
+	/* Read flist batch file */
+
+	bytes_read = read(fdb, buff, len);
+
+	if (bytes_read == -1) {
+		rprintf(FERROR, "Batch file %s read error: %s\n",
+			rsync_flist_file, strerror(errno));
+		close(fdb);
+		exit_cleanup(1);
+	}
+	if (bytes_read == 0) {	/* EOF */
+		close(fdb);
+	}
+	return bytes_read;
+}
+
+unsigned char read_batch_flags()
+{
+	int flags;
+
+	if (read_batch_flist_file((char *) &flags, 4)) {
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+void read_batch_flist_info(struct file_struct **fptr)
+{
+	int int_str_len;
+	char char_str_len[4];
+	char buff[256];
+	struct file_struct *file;
+
+	file = (struct file_struct *) malloc(sizeof(*file));
+	if (!file)
+		out_of_memory("read_batch_flist_info");
+	memset((char *) file, 0, sizeof(*file));
+
+	(*fptr) = file;
+
+	read_batch_flist_file((char *) &file->modtime, sizeof(time_t));
+	read_batch_flist_file((char *) &file->length, sizeof(OFF_T));
+	read_batch_flist_file((char *) &file->mode, sizeof(mode_t));
+	read_batch_flist_file((char *) &file->inode, sizeof(INO64_T));
+	read_batch_flist_file((char *) &file->dev, sizeof(DEV64_T));
+	read_batch_flist_file((char *) &file->rdev, sizeof(DEV64_T));
+	read_batch_flist_file((char *) &file->uid, sizeof(uid_t));
+	read_batch_flist_file((char *) &file->gid, sizeof(gid_t));
+	read_batch_flist_file(char_str_len, sizeof(char_str_len));
+	int_str_len = IVAL(char_str_len, 0);
+	if (int_str_len > 0) {
+		read_batch_flist_file(buff, int_str_len);
+		buff[int_str_len] = '\0';
+		file->basename = strdup(buff);
+	} else {
+		file->basename = NULL;
+	}
+
+	read_batch_flist_file(char_str_len, sizeof(char_str_len));
+	int_str_len = IVAL(char_str_len, 0);
+	if (int_str_len > 0) {
+		read_batch_flist_file(buff, int_str_len);
+		buff[int_str_len] = '\0';
+		file[0].dirname = strdup(buff);
+	} else {
+		file[0].dirname = NULL;
+	}
+
+	read_batch_flist_file(char_str_len, sizeof(char_str_len));
+	int_str_len = IVAL(char_str_len, 0);
+	if (int_str_len > 0) {
+		read_batch_flist_file(buff, int_str_len);
+		buff[int_str_len] = '\0';
+		file[0].basedir = strdup(buff);
+	} else {
+		file[0].basedir = NULL;
+	}
+
+	read_batch_flist_file(char_str_len, sizeof(char_str_len));
+	int_str_len = IVAL(char_str_len, 0);
+	if (int_str_len > 0) {
+		read_batch_flist_file(buff, int_str_len);
+		buff[int_str_len] = '\0';
+		file[0].link = strdup(buff);
+	} else {
+		file[0].link = NULL;
+	}
+
+	read_batch_flist_file(char_str_len, sizeof(char_str_len));
+	int_str_len = IVAL(char_str_len, 0);
+	if (int_str_len > 0) {
+		read_batch_flist_file(buff, int_str_len);
+		buff[int_str_len] = '\0';
+		file[0].sum = strdup(buff);
+	} else {
+		file[0].sum = NULL;
+	}
+}
+
+void write_batch_csums_file(void *buff, int bytes_to_write)
+{
+
+	static int fdb_open = 1;
+
+	if (fdb_open) {
+		/* Set up file extension */
+		strcat(rsync_csums_file, batch_file_ext);
+
+		/* Open batch csums file for writing; create it if it doesn't exist */
+		fdb =
+		    do_open(rsync_csums_file, O_WRONLY | O_CREAT | O_TRUNC,
+			    S_IREAD | S_IWRITE);
+		if (fdb == -1) {
+			rprintf(FERROR, "Batch file %s open error: %s\n",
+				rsync_csums_file, strerror(errno));
+			close(fdb);
+			exit_cleanup(1);
+		}
+		fdb_open = 0;
+	}
+
+	/* Write buffer to batch csums file */
+
+	if (write(fdb, buff, bytes_to_write) == -1) {
+		rprintf(FERROR, "Batch file %s write error: %s\n",
+			rsync_csums_file, strerror(errno));
+		close(fdb);
 		exit_cleanup(1);
 	}
 }
 
+void close_batch_csums_file()
+{
+	close(fdb);
+
+}
+
+void write_batch_csum_info(int *flist_entry, int flist_count,
+			   struct sum_struct *s)
+{
+	size_t i;
+	unsigned int int_zero = 0;
+	extern int csum_length;
+
+	fdb_open = 1;
+
+	/* Write csum info to batch file */
+
+	/* FIXME: This will break if s->count is ever not exactly an int. */
+	write_batch_csums_file(flist_entry, sizeof(int));
+	if (s)
+		write_batch_csums_file(&s->count, sizeof(int));
+	else
+		write_batch_csums_file(&int_zero, sizeof (int));
+	
+	if (s) {
+		for (i = 0; i < s->count; i++) {
+			write_batch_csums_file(&s->sums[i].sum1, sizeof(uint32));
+			if ((*flist_entry == flist_count - 1)
+			    && (i == s->count - 1)) {
+				fdb_close = 1;
+			}
+			write_batch_csums_file(s->sums[i].sum2,
+					       csum_length);
+		}
+	}
+}
+
+int read_batch_csums_file(char *buff, int len)
+{
+	static int fdb_open = 1;
+	int bytes_read;
+
+	if (fdb_open) {
+
+		/*  Set up file extension  */
+		strcat(rsync_csums_file, batch_file_ext);
+
+		/* Open batch flist file for reading */
+		fdb = do_open(rsync_csums_file, O_RDONLY, 0);
+		if (fdb == -1) {
+			rprintf(FERROR, "Batch file %s open error: %s\n",
+				rsync_csums_file, strerror(errno));
+			close(fdb);
+			exit_cleanup(1);
+		}
+		fdb_open = 0;
+	}
+
+	/* Read csums batch file */
+
+	bytes_read = read(fdb, buff, len);
+
+	if (bytes_read == -1) {
+		rprintf(FERROR, "Batch file %s read error: %s\n",
+			rsync_csums_file, strerror(errno));
+		close(fdb);
+		exit_cleanup(1);
+	}
+	return bytes_read;
+}
+
+
+void read_batch_csum_info(int flist_entry, struct sum_struct *s,
+			  int *checksums_match)
+{
+	int i;
+	int file_flist_entry;
+	int file_chunk_ct;
+	uint32 file_sum1;
+	char file_sum2[SUM_LENGTH];
+	extern int csum_length;
+
+
+	read_batch_csums_file((char *) &file_flist_entry, sizeof(int));
+	if (file_flist_entry != flist_entry) {
+		rprintf(FINFO, "file_list_entry NE flist_entry\n");
+		rprintf(FINFO, "file_flist_entry = %d  flist_entry = %d\n",
+			file_flist_entry, flist_entry);
+		close(fdb);
+		exit_cleanup(1);
+
+	} else {
+		read_batch_csums_file((char *) &file_chunk_ct,
+				      sizeof(int));
+		*checksums_match = 1;
+		for (i = 0; i < file_chunk_ct; i++) {
+
+			read_batch_csums_file((char *) &file_sum1,
+					      sizeof(uint32));
+			read_batch_csums_file(file_sum2, csum_length);
+
+			if ((s->sums[i].sum1 != file_sum1) ||
+			    (memcmp
+			     (s->sums[i].sum2, file_sum2,
+			      csum_length) != 0)) {
+				*checksums_match = 0;
+			}
+		}		/*  end for  */
+	}
+
+}
+
+void write_batch_delta_file(char *buff, int bytes_to_write)
+{
+	static int fdb_delta_open = 1;
+
+	if (fdb_delta_open) {
+		/* Set up file extension */
+		strcat(rsync_delta_file, batch_file_ext);
+
+		/* Open batch delta file for writing; create it if it doesn't exist */
+		fdb_delta =
+		    do_open(rsync_delta_file, O_WRONLY | O_CREAT | O_TRUNC,
+			    S_IREAD | S_IWRITE);
+		if (fdb_delta == -1) {
+			rprintf(FERROR, "Batch file %s open error: %s\n",
+				rsync_delta_file, strerror(errno));
+			close(fdb_delta);
+			exit_cleanup(1);
+		}
+		fdb_delta_open = 0;
+	}
+
+	/* Write buffer to batch delta file */
+
+	if (write(fdb_delta, buff, bytes_to_write) == -1) {
+		rprintf(FERROR, "Batch file %s write error: %s\n",
+			rsync_delta_file, strerror(errno));
+		close(fdb_delta);
+		exit_cleanup(1);
+	}
+}
+void close_batch_delta_file()
+{
+	close(fdb_delta);
+
+}
+
+int read_batch_delta_file(char *buff, int len)
+{
+	static int fdb_delta_open = 1;
+	int bytes_read;
+
+	if (fdb_delta_open) {
+
+		/*  Set up file extension  */
+		strcat(rsync_delta_file, batch_file_ext);
+
+		/* Open batch flist file for reading */
+		fdb_delta = do_open(rsync_delta_file, O_RDONLY, 0);
+		if (fdb_delta == -1) {
+			rprintf(FERROR, "Batch file %s open error: %s\n",
+				rsync_delta_file, strerror(errno));
+			close(fdb_delta);
+			exit_cleanup(1);
+		}
+		fdb_delta_open = 0;
+	}
+
+	/* Read delta batch file */
+
+	bytes_read = read(fdb_delta, buff, len);
+
+	if (bytes_read == -1) {
+		rprintf(FERROR, "Batch file %s read error: %s\n",
+			rsync_delta_file, strerror(errno));
+		close(fdb_delta);
+		exit_cleanup(1);
+	}
+	return bytes_read;
+}
+
+
 void show_flist(int index, struct file_struct **fptr)
 {
 	/*  for debugging    show_flist(flist->count, flist->files * */
@@ -211,25 +581,25 @@ void show_flist(int index, struct file_struct **fptr)
 		rprintf(FINFO, "flist->length=%.0f\n",
 			(double) fptr[i]->length);
 		rprintf(FINFO, "flist->mode=%#o\n", (int) fptr[i]->mode);
-		rprintf(FINFO, "flist->basename=%s\n",
-			safe_fname(fptr[i]->basename));
-		if (fptr[i]->dirname) {
+		rprintf(FINFO, "flist->basename=%s\n", fptr[i]->basename);
+		if (fptr[i]->dirname)
 			rprintf(FINFO, "flist->dirname=%s\n",
-				safe_fname(fptr[i]->dirname));
-		}
-		if (am_sender && fptr[i]->dir.root) {
-			rprintf(FINFO, "flist->dir.root=%s\n",
-				safe_fname(fptr[i]->dir.root));
-		}
+				fptr[i]->dirname);
+		if (fptr[i]->basedir)
+			rprintf(FINFO, "flist->basedir=%s\n",
+				fptr[i]->basedir);
 	}
 }
 
-/* for debugging */
 void show_argvs(int argc, char *argv[])
 {
-	int i;
+	/*  for debugging  * */
 
+	int i;
 	rprintf(FINFO, "BATCH.C:show_argvs,argc=%d\n", argc);
-	for (i = 0; i < argc; i++)
-		rprintf(FINFO, "i=%d,argv[i]=%s\n", i, safe_fname(argv[i]));
+	for (i = 0; i < argc; i++) {
+		/*    if (argv[i])   */
+		rprintf(FINFO, "i=%d,argv[i]=%s\n", i, argv[i]);
+
+	}
 }

checksum.c

@@ -1,17 +1,17 @@
-/*
+/* 
    Copyright (C) Andrew Tridgell 1996
    Copyright (C) Paul Mackerras 1996
-
+   
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
-
+   
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
+   
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
@@ -23,24 +23,24 @@ int csum_length=2; /* initial value */
 
 #define CSUM_CHUNK 64
 
-extern int checksum_seed;
-extern int protocol_version;
+int checksum_seed = 0;
+extern int remote_version;
 
 /*
   a simple 32 bit checksum that can be upadted from either end
   (inspired by Mark Adler's Adler-32 checksum)
   */
-uint32 get_checksum1(char *buf1, int32 len)
+uint32 get_checksum1(char *buf1,int len)
 {
-    int32 i;
+    int i;
     uint32 s1, s2;
     schar *buf = (schar *)buf1;
 
     s1 = s2 = 0;
     for (i = 0; i < (len-4); i+=4) {
-	s2 += 4*(s1 + buf[i]) + 3*buf[i+1] + 2*buf[i+2] + buf[i+3] +
+	s2 += 4*(s1 + buf[i]) + 3*buf[i+1] + 2*buf[i+2] + buf[i+3] + 
 	  10*CHAR_OFFSET;
-	s1 += (buf[i+0] + buf[i+1] + buf[i+2] + buf[i+3] + 4*CHAR_OFFSET);
+	s1 += (buf[i+0] + buf[i+1] + buf[i+2] + buf[i+3] + 4*CHAR_OFFSET); 
     }
     for (; i < len; i++) {
 	s1 += (buf[i]+CHAR_OFFSET); s2 += s1;
@@ -49,43 +49,35 @@ uint32 get_checksum1(char *buf1, int32 len)
 }
 
 
-void get_checksum2(char *buf, int32 len, char *sum)
+void get_checksum2(char *buf,int len,char *sum)
 {
-	int32 i;
+	int i;
 	static char *buf1;
-	static int32 len1;
+	static int len1;
 	struct mdfour m;
 
 	if (len > len1) {
-		if (buf1)
-			free(buf1);
-		buf1 = new_array(char, len+4);
+		if (buf1) free(buf1);
+		buf1 = (char *)malloc(len+4);
 		len1 = len;
-		if (!buf1)
-			out_of_memory("get_checksum2");
+		if (!buf1) out_of_memory("get_checksum2");
 	}
-
+	
 	mdfour_begin(&m);
-
+	
 	memcpy(buf1,buf,len);
 	if (checksum_seed) {
 		SIVAL(buf1,len,checksum_seed);
 		len += 4;
 	}
-
+	
 	for(i = 0; i + CSUM_CHUNK <= len; i += CSUM_CHUNK) {
 		mdfour_update(&m, (uchar *)(buf1+i), CSUM_CHUNK);
 	}
-	/*
-	 * Prior to version 27 an incorrect MD4 checksum was computed
-	 * by failing to call mdfour_tail() for block sizes that
-	 * are multiples of 64.  This is fixed by calling mdfour_update()
-	 * even when there are no more bytes.
-	 */
-	if (len - i > 0 || protocol_version >= 27) {
+	if (len - i > 0) {
 		mdfour_update(&m, (uchar *)(buf1+i), (len-i));
 	}
-
+	
 	mdfour_result(&m, (uchar *)sum);
 }
 
@@ -96,29 +88,27 @@ void file_checksum(char *fname,char *sum,OFF_T size)
 	struct map_struct *buf;
 	int fd;
 	OFF_T len = size;
+	char tmpchunk[CSUM_CHUNK];
 	struct mdfour m;
-
+	
 	memset(sum,0,MD4_SUM_LENGTH);
-
+	
 	fd = do_open(fname, O_RDONLY, 0);
-	if (fd == -1)
-		return;
-
-	buf = map_file(fd, size, MAX_MAP_SIZE, CSUM_CHUNK);
-
+	if (fd == -1) return;
+	
+	buf = map_file(fd,size);
+	
 	mdfour_begin(&m);
 
 	for(i = 0; i + CSUM_CHUNK <= len; i += CSUM_CHUNK) {
-		mdfour_update(&m, (uchar *)map_ptr(buf, i, CSUM_CHUNK),
-			      CSUM_CHUNK);
+		memcpy(tmpchunk, map_ptr(buf,i,CSUM_CHUNK), CSUM_CHUNK);
+		mdfour_update(&m, (uchar *)tmpchunk, CSUM_CHUNK);
 	}
 
-	/* Prior to version 27 an incorrect MD4 checksum was computed
-	 * by failing to call mdfour_tail() for block sizes that
-	 * are multiples of 64.  This is fixed by calling mdfour_update()
-	 * even when there are no more bytes. */
-	if (len - i > 0 || protocol_version >= 27)
-		mdfour_update(&m, (uchar *)map_ptr(buf, i, len-i), len-i);
+	if (len - i > 0) {
+		memcpy(tmpchunk, map_ptr(buf,i,len-i), len-i);
+		mdfour_update(&m, (uchar *)tmpchunk, (len-i));
+	}
 
 	mdfour_result(&m, (uchar *)sum);
 
@@ -127,58 +117,64 @@ void file_checksum(char *fname,char *sum,OFF_T size)
 }
 
 
-static int32 sumresidue;
+void checksum_init(void)
+{
+  if (remote_version >= 14)
+    csum_length = 2; /* adaptive */
+  else
+    csum_length = SUM_LENGTH;
+}
+
+
+
+static int sumresidue;
 static char sumrbuf[CSUM_CHUNK];
 static struct mdfour md;
 
-void sum_init(int seed)
+void sum_init(void)
 {
 	char s[4];
 	mdfour_begin(&md);
-	sumresidue = 0;
-	SIVAL(s, 0, seed);
-	sum_update(s, 4);
+	sumresidue=0;
+	SIVAL(s,0,checksum_seed);
+	sum_update(s,4);
 }
 
-/**
- * Feed data into an MD4 accumulator, md.  The results may be
- * retrieved using sum_end().  md is used for different purposes at
- * different points during execution.
- *
- * @todo Perhaps get rid of md and just pass in the address each time.
- * Very slightly clearer and slower.
- **/
-void sum_update(char *p, int32 len)
+void sum_update(char *p,int len)
 {
+	int i;
 	if (len + sumresidue < CSUM_CHUNK) {
-		memcpy(sumrbuf + sumresidue, p, len);
+		memcpy(sumrbuf+sumresidue, p, len);
 		sumresidue += len;
 		return;
 	}
 
 	if (sumresidue) {
-		int32 i = CSUM_CHUNK - sumresidue;
-		memcpy(sumrbuf + sumresidue, p, i);
-		mdfour_update(&md, (uchar *)sumrbuf, CSUM_CHUNK);
+		i = MIN(CSUM_CHUNK-sumresidue,len);
+		memcpy(sumrbuf+sumresidue,p,i);
+		mdfour_update(&md, (uchar *)sumrbuf, (i+sumresidue));
 		len -= i;
 		p += i;
 	}
 
-	while (len >= CSUM_CHUNK) {
-		mdfour_update(&md, (uchar *)p, CSUM_CHUNK);
-		len -= CSUM_CHUNK;
-		p += CSUM_CHUNK;
+	for(i = 0; i + CSUM_CHUNK <= len; i += CSUM_CHUNK) {
+		memcpy(sumrbuf,p+i,CSUM_CHUNK);
+		mdfour_update(&md, (uchar *)sumrbuf, CSUM_CHUNK);
 	}
 
-	sumresidue = len;
-	if (sumresidue)
-		memcpy(sumrbuf, p, sumresidue);
+	if (len - i > 0) {
+		sumresidue = len-i;
+		memcpy(sumrbuf,p+i,sumresidue);
+	} else {
+		sumresidue = 0;    
+	}
 }
 
 void sum_end(char *sum)
 {
-	if (sumresidue || protocol_version >= 27)
+	if (sumresidue) {
 		mdfour_update(&md, (uchar *)sumrbuf, sumresidue);
+	}
 
 	mdfour_result(&md, (uchar *)sum);
 }

cleanup.c

@@ -1,19 +1,18 @@
 /* -*- c-file-style: "linux" -*-
-
+   
    Copyright (C) 1996-2000 by Andrew Tridgell
    Copyright (C) Paul Mackerras 1996
-   Copyright (C) 2002 by Martin Pool
-
+   
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
-
+   
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
+   
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
@@ -21,138 +20,67 @@
 
 #include "rsync.h"
 
-extern int io_error;
-extern int keep_partial;
-extern int log_got_error;
-extern char *partial_dir;
-
-/**
- * Close all open sockets and files, allowing a (somewhat) graceful
- * shutdown() of socket connections.  This eliminates the abortive
- * TCP RST sent by a Winsock-based system when the close() occurs.
- **/
-void close_all(void)
-{
-#ifdef SHUTDOWN_ALL_SOCKETS
-	int max_fd;
-	int fd;
-	int ret;
-	STRUCT_STAT st;
-
-	max_fd = sysconf(_SC_OPEN_MAX) - 1;
-	for (fd = max_fd; fd >= 0; fd--) {
-		if ((ret = do_fstat(fd, &st)) == 0) {
-			if (is_a_socket(fd))
-				ret = shutdown(fd, 2);
-			ret = close(fd);
-		}
-	}
-#endif
-}
-
-/**
- * @file cleanup.c
- *
- * Code for handling interrupted transfers.  Depending on the @c
- * --partial option, we may either delete the temporary file, or go
- * ahead and overwrite the destination.  This second behaviour only
- * occurs if we've sent literal data and therefore hopefully made
- * progress on the transfer.
- **/
-
-/**
- * Set to True once literal data has been sent across the link for the
- * current file. (????)
- *
- * Handling the cleanup when a transfer is interrupted is tricky when
- * --partial is selected.  We need to ensure that the partial file is
- * kept if any real data has been transferred.
- **/
-int cleanup_got_literal = 0;
+/* handling the cleanup when a transfer is interrupted is tricky when
+   --partial is selected. We need to ensure that the partial file is
+   kept if any real data has been transferred */
+int cleanup_got_literal=0;
 
 static char *cleanup_fname;
 static char *cleanup_new_fname;
 static struct file_struct *cleanup_file;
-static int cleanup_fd_r, cleanup_fd_w;
-static pid_t cleanup_pid = 0;
+static int cleanup_fd1, cleanup_fd2;
+static struct map_struct *cleanup_buf;
+static int cleanup_pid = 0;
+extern int io_error;
 
 pid_t cleanup_child_pid = -1;
 
-/**
- * Eventually calls exit(), passing @p code, therefore does not return.
- *
- * @param code one of the RERR_* codes from errcode.h.
- **/
+/*
+ * Code is one of the RERR_* codes from errcode.h.
+ */
 void _exit_cleanup(int code, const char *file, int line)
 {
-	int ocode = code;
-	static int inside_cleanup = 0;
-
-	if (inside_cleanup > 10) {
-		/* prevent the occasional infinite recursion */
-		return;
-	}
-	inside_cleanup++;
+	extern int keep_partial;
+	extern int log_got_error;
 
 	signal(SIGUSR1, SIG_IGN);
 	signal(SIGUSR2, SIG_IGN);
 
-	if (verbose > 3) {
-		rprintf(FINFO,"_exit_cleanup(code=%d, file=%s, line=%d): entered\n",
-			code, safe_fname(file), line);
-	}
-
 	if (cleanup_child_pid != -1) {
 		int status;
 		if (waitpid(cleanup_child_pid, &status, WNOHANG) == cleanup_child_pid) {
 			status = WEXITSTATUS(status);
-			if (status > code)
-				code = status;
+			if (status > code) code = status;
 		}
 	}
 
-	if (cleanup_got_literal && cleanup_fname && keep_partial
-	    && handle_partial_dir(cleanup_new_fname, PDIR_CREATE)) {
+	if (cleanup_got_literal && cleanup_fname && keep_partial) {
 		char *fname = cleanup_fname;
 		cleanup_fname = NULL;
-		if (cleanup_fd_r != -1)
-			close(cleanup_fd_r);
-		if (cleanup_fd_w != -1) {
-			flush_write_file(cleanup_fd_w);
-			close(cleanup_fd_w);
-		}
-		finish_transfer(cleanup_new_fname, fname, cleanup_file, 0,
-				!partial_dir);
+		if (cleanup_buf) unmap_file(cleanup_buf);
+		if (cleanup_fd1 != -1) close(cleanup_fd1);
+		if (cleanup_fd2 != -1) close(cleanup_fd2);
+		finish_transfer(cleanup_new_fname, fname, cleanup_file);
 	}
-	io_flush(FULL_FLUSH);
+	io_flush();
 	if (cleanup_fname)
 		do_unlink(cleanup_fname);
-	if (code)
+	if (code) {
 		kill_all(SIGUSR1);
-	if (cleanup_pid && cleanup_pid == getpid()) {
+	}
+	if ((cleanup_pid != 0) && (cleanup_pid == (int) getpid())) {
 		char *pidf = lp_pid_file();
-		if (pidf && *pidf)
+		if (pidf && *pidf) {
 			unlink(lp_pid_file());
+		}
 	}
 
-	if (code == 0) {
-		if (io_error & IOERR_DEL_LIMIT)
-			code = RERR_DEL_LIMIT;
-		if (io_error & IOERR_VANISHED)
-			code = RERR_VANISHED;
-		if (io_error & IOERR_GENERAL || log_got_error)
-			code = RERR_PARTIAL;
+	if (code == 0 && (io_error || log_got_error)) {
+		code = RERR_PARTIAL;
 	}
 
-	if (code)
-		log_exit(code, file, line);
+	if (code) log_exit(code, file, line);
 
-	if (verbose > 2) {
-		rprintf(FINFO,"_exit_cleanup(code=%d, file=%s, line=%d): about to call exit(%d)\n",
-			ocode, safe_fname(file), line, code);
-	}
-
-	close_all();
 	exit(code);
 }
 
@@ -164,16 +92,17 @@ void cleanup_disable(void)
 
 
 void cleanup_set(char *fnametmp, char *fname, struct file_struct *file,
-		 int fd_r, int fd_w)
+		 struct map_struct *buf, int fd1, int fd2)
 {
 	cleanup_fname = fnametmp;
 	cleanup_new_fname = fname;
 	cleanup_file = file;
-	cleanup_fd_r = fd_r;
-	cleanup_fd_w = fd_w;
+	cleanup_buf = buf;
+	cleanup_fd1 = fd1;
+	cleanup_fd2 = fd2;
 }
 
-void cleanup_set_pid(pid_t pid)
+void cleanup_set_pid(int pid)
 {
 	cleanup_pid = pid;
 }

clientname.c

@@ -1,348 +0,0 @@
-/* -*- c-file-style: "linux" -*-
-
-   rsync -- fast file replication program
-
-   Copyright (C) 1992-2001 by Andrew Tridgell <tridge@samba.org>
-   Copyright (C) 2001, 2002 by Martin Pool <mbp@samba.org>
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/**
- * @file clientname.c
- *
- * Functions for looking up the remote name or addr of a socket.
- *
- * This file is now converted to use the new-style getaddrinfo()
- * interface, which supports IPv6 but is also supported on recent
- * IPv4-only machines.  On systems that don't have that interface, we
- * emulate it using the KAME implementation.
- **/
-
-#include "rsync.h"
-
-static const char default_name[] = "UNKNOWN";
-extern int am_daemon;
-extern int am_server;
-
-
-/**
- * Return the IP addr of the client as a string
- **/
-char *client_addr(int fd)
-{
-	static char addr_buf[100];
-	static int initialised;
-	struct sockaddr_storage ss;
-	socklen_t length = sizeof ss;
-	char *ssh_info, *p;
-
-	if (initialised)
-		return addr_buf;
-
-	initialised = 1;
-
-	if (am_server) {	/* daemon over --rsh mode */
-		strcpy(addr_buf, "0.0.0.0");
-		if ((ssh_info = getenv("SSH_CONNECTION")) != NULL
-		    || (ssh_info = getenv("SSH_CLIENT")) != NULL
-		    || (ssh_info = getenv("SSH2_CLIENT")) != NULL) {
-			strlcpy(addr_buf, ssh_info, sizeof addr_buf);
-			/* Truncate the value to just the IP address. */
-			if ((p = strchr(addr_buf, ' ')) != NULL)
-				*p = '\0';
-		}
-	} else {
-		client_sockaddr(fd, &ss, &length);
-		getnameinfo((struct sockaddr *)&ss, length,
-			    addr_buf, sizeof addr_buf, NULL, 0, NI_NUMERICHOST);
-	}
-
-	return addr_buf;
-}
-
-
-static int get_sockaddr_family(const struct sockaddr_storage *ss)
-{
-	return ((struct sockaddr *) ss)->sa_family;
-}
-
-
-/**
- * Return the DNS name of the client.
- *
- * The name is statically cached so that repeated lookups are quick,
- * so there is a limit of one lookup per customer.
- *
- * If anything goes wrong, including the name->addr->name check, then
- * we just use "UNKNOWN", so you can use that value in hosts allow
- * lines.
- *
- * After translation from sockaddr to name we do a forward lookup to
- * make sure nobody is spoofing PTR records.
- **/
-char *client_name(int fd)
-{
-	static char name_buf[100];
-	static char port_buf[100];
-	static int initialised;
-	struct sockaddr_storage ss;
-	socklen_t ss_len;
-
-	if (initialised)
-		return name_buf;
-
-	strcpy(name_buf, default_name);
-	initialised = 1;
-
-	memset(&ss, 0, sizeof ss);
-
-	if (am_server) {	/* daemon over --rsh mode */
-		char *addr = client_addr(fd);
-		struct addrinfo hint, *answer;
-		int err;
-
-		memset(&hint, 0, sizeof hint);
-
-#ifdef AI_NUMERICHOST
-		hint.ai_flags = AI_NUMERICHOST;
-#endif
-		hint.ai_socktype = SOCK_STREAM;
-
-		if ((err = getaddrinfo(addr, NULL, &hint, &answer)) != 0) {
-			rprintf(FLOG, "malformed address %s: %s\n",
-			        addr, gai_strerror(err));
-			return name_buf;
-		}
-
-		switch (answer->ai_family) {
-		case AF_INET:
-			ss_len = sizeof (struct sockaddr_in);
-			memcpy(&ss, answer->ai_addr, ss_len);
-			break;
-#ifdef INET6
-		case AF_INET6:
-			ss_len = sizeof (struct sockaddr_in6);
-			memcpy(&ss, answer->ai_addr, ss_len);
-			break;
-#endif
-		}
-		freeaddrinfo(answer);
-	} else {
-		ss_len = sizeof ss;
-		client_sockaddr(fd, &ss, &ss_len);
-	}
-
-	if (lookup_name(fd, &ss, ss_len, name_buf, sizeof name_buf,
-			port_buf, sizeof port_buf) == 0)
-		check_name(fd, &ss, name_buf);
-
-	return name_buf;
-}
-
-
-
-/**
- * Get the sockaddr for the client.
- *
- * If it comes in as an ipv4 address mapped into IPv6 format then we
- * convert it back to a regular IPv4.
- **/
-void client_sockaddr(int fd,
-		     struct sockaddr_storage *ss,
-		     socklen_t *ss_len)
-{
-	memset(ss, 0, sizeof *ss);
-
-	if (getpeername(fd, (struct sockaddr *) ss, ss_len)) {
-		/* FIXME: Can we really not continue? */
-		rsyserr(FLOG, errno, "getpeername on fd%d failed", fd);
-		exit_cleanup(RERR_SOCKETIO);
-	}
-
-#ifdef INET6
-	if (get_sockaddr_family(ss) == AF_INET6 &&
-	    IN6_IS_ADDR_V4MAPPED(&((struct sockaddr_in6 *)ss)->sin6_addr)) {
-		/* OK, so ss is in the IPv6 family, but it is really
-		 * an IPv4 address: something like
-		 * "::ffff:10.130.1.2".  If we use it as-is, then the
-		 * reverse lookup might fail or perhaps something else
-		 * bad might happen.  So instead we convert it to an
-		 * equivalent address in the IPv4 address family.  */
-		struct sockaddr_in6 sin6;
-		struct sockaddr_in *sin;
-
-		memcpy(&sin6, ss, sizeof sin6);
-		sin = (struct sockaddr_in *)ss;
-		memset(sin, 0, sizeof *sin);
-		sin->sin_family = AF_INET;
-		*ss_len = sizeof (struct sockaddr_in);
-#ifdef HAVE_SOCKADDR_IN_LEN
-		sin->sin_len = *ss_len;
-#endif
-		sin->sin_port = sin6.sin6_port;
-
-		/* There is a macro to extract the mapped part
-		 * (IN6_V4MAPPED_TO_SINADDR ?), but it does not seem
-		 * to be present in the Linux headers. */
-		memcpy(&sin->sin_addr, &sin6.sin6_addr.s6_addr[12],
-		    sizeof sin->sin_addr);
-	}
-#endif
-}
-
-
-/**
- * Look up a name from @p ss into @p name_buf.
- *
- * @param fd file descriptor for client socket.
- **/
-int lookup_name(int fd, const struct sockaddr_storage *ss,
-		socklen_t ss_len,
-		char *name_buf, size_t name_buf_len,
-		char *port_buf, size_t port_buf_len)
-{
-	int name_err;
-
-	/* reverse lookup */
-	name_err = getnameinfo((struct sockaddr *) ss, ss_len,
-			       name_buf, name_buf_len,
-			       port_buf, port_buf_len,
-			       NI_NAMEREQD | NI_NUMERICSERV);
-	if (name_err != 0) {
-		strcpy(name_buf, default_name);
-		rprintf(FLOG, "name lookup failed for %s: %s\n",
-			client_addr(fd), gai_strerror(name_err));
-		return name_err;
-	}
-
-	return 0;
-}
-
-
-
-/**
- * Compare an addrinfo from the resolver to a sockinfo.
- *
- * Like strcmp, returns 0 for identical.
- **/
-int compare_addrinfo_sockaddr(const struct addrinfo *ai,
-			      const struct sockaddr_storage *ss)
-{
-	int ss_family = get_sockaddr_family(ss);
-	const char fn[] = "compare_addrinfo_sockaddr";
-
-	if (ai->ai_family != ss_family) {
-		rprintf(FLOG, "%s: response family %d != %d\n",
-			fn, ai->ai_family, ss_family);
-		return 1;
-	}
-
-	/* The comparison method depends on the particular AF. */
-	if (ss_family == AF_INET) {
-		const struct sockaddr_in *sin1, *sin2;
-
-		sin1 = (const struct sockaddr_in *) ss;
-		sin2 = (const struct sockaddr_in *) ai->ai_addr;
-
-		return memcmp(&sin1->sin_addr, &sin2->sin_addr,
-			      sizeof sin1->sin_addr);
-	}
-
-#ifdef INET6
-	if (ss_family == AF_INET6) {
-		const struct sockaddr_in6 *sin1, *sin2;
-
-		sin1 = (const struct sockaddr_in6 *) ss;
-		sin2 = (const struct sockaddr_in6 *) ai->ai_addr;
-
-		if (ai->ai_addrlen < sizeof (struct sockaddr_in6)) {
-			rprintf(FLOG, "%s: too short sockaddr_in6; length=%d\n",
-				fn, ai->ai_addrlen);
-			return 1;
-		}
-
-		if (memcmp(&sin1->sin6_addr, &sin2->sin6_addr,
-			   sizeof sin1->sin6_addr))
-			return 1;
-
-#ifdef HAVE_SOCKADDR_IN6_SCOPE_ID
-		if (sin1->sin6_scope_id != sin2->sin6_scope_id)
-			return 1;
-#endif
-		return 0;
-	}
-#endif /* INET6 */
-
-	/* don't know */
-	return 1;
-}
-
-
-/**
- * Do a forward lookup on @p name_buf and make sure it corresponds to
- * @p ss -- otherwise we may be being spoofed.  If we suspect we are,
- * then we don't abort the connection but just emit a warning, and
- * change @p name_buf to be "UNKNOWN".
- *
- * We don't do anything with the service when checking the name,
- * because it doesn't seem that it could be spoofed in any way, and
- * getaddrinfo on random service names seems to cause problems on AIX.
- **/
-int check_name(int fd,
-	       const struct sockaddr_storage *ss,
-	       char *name_buf)
-{
-	struct addrinfo hints, *res, *res0;
-	int error;
-	int ss_family = get_sockaddr_family(ss);
-
-	memset(&hints, 0, sizeof hints);
-	hints.ai_family = ss_family;
-	hints.ai_flags = AI_CANONNAME;
-	hints.ai_socktype = SOCK_STREAM;
-	error = getaddrinfo(name_buf, NULL, &hints, &res0);
-	if (error) {
-		rprintf(FLOG, "forward name lookup for %s failed: %s\n",
-			name_buf, gai_strerror(error));
-		strcpy(name_buf, default_name);
-		return error;
-	}
-
-
-	/* Given all these results, we expect that one of them will be
-	 * the same as ss.  The comparison is a bit complicated. */
-	for (res = res0; res; res = res->ai_next) {
-		if (!compare_addrinfo_sockaddr(res, ss))
-			break;	/* OK, identical */
-	}
-
-	if (!res0) {
-		/* We hit the end of the list without finding an
-		 * address that was the same as ss. */
-		rprintf(FLOG, "no known address for \"%s\": "
-			"spoofed address?\n", name_buf);
-		strcpy(name_buf, default_name);
-	} else if (res == NULL) {
-		/* We hit the end of the list without finding an
-		 * address that was the same as ss. */
-		rprintf(FLOG, "%s is not a known address for \"%s\": "
-			"spoofed address?\n", client_addr(fd), name_buf);
-		strcpy(name_buf, default_name);
-	}
-
-	freeaddrinfo(res0);
-	return 0;
-}

clientserver.c

@@ -1,349 +1,247 @@
 /* -*- c-file-style: "linux"; -*-
- *
- * Copyright (C) 1998-2001 by Andrew Tridgell <tridge@samba.org>
- * Copyright (C) 2001-2002 by Martin Pool <mbp@samba.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
+   
+   Copyright (C) 1998-2001 by Andrew Tridgell <tridge@samba.org>
+   Copyright (C) 2001 by Martin Pool <mbp@samba.org>
+   
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+   
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
 
-/**
- * @file
- *
- * The socket based protocol for setting up a connection with
- * rsyncd.
- **/
+/* the socket based protocol for setting up a connection with rsyncd */
 
 #include "rsync.h"
 
+extern int module_id;
+extern int read_only;
 extern int verbose;
-extern int list_only;
-extern int am_sender;
-extern int am_server;
-extern int am_daemon;
-extern int am_root;
 extern int rsync_port;
-extern int kluge_around_eof;
-extern int daemon_over_rsh;
-extern int sanitize_paths;
-extern int filesfrom_fd;
-extern int remote_protocol;
-extern int protocol_version;
-extern int io_timeout;
-extern int orig_umask;
-extern int no_detach;
-extern int default_af_hint;
-extern char *bind_address;
-extern struct filter_list_struct server_filter_list;
-extern char *config_file;
-extern char *files_from;
-
 char *auth_user;
-int read_only = 0;
-int daemon_log_format_has_i = 0;
-int daemon_log_format_has_o_or_i = 0;
-int module_id = -1;
+int sanitize_paths = 0;
 
-/* Length of lp_path() string when in daemon mode & not chrooted, else 0. */
-unsigned int module_dirlen = 0;
-
-/**
+/*
  * Run a client connected to an rsyncd.  The alternative to this
- * function for remote-shell connections is do_cmd().
- *
- * After negotiating which module to use and reading the server's
- * motd, this hands over to client_run().  Telling the server the
- * module will cause it to chroot/setuid/etc.
- *
- * Instead of doing a transfer, the client may at this stage instead
- * get a listing of remote modules and exit.
- *
- * @return -1 for error in startup, or the result of client_run().
- * Either way, it eventually gets passed to exit_cleanup().
- **/
+ * function for remote-shell connections is do_cmd.
+ */
 int start_socket_client(char *host, char *path, int argc, char *argv[])
 {
-	int fd, ret;
-	char *p, *user = NULL;
+	int fd, i;
+	char *sargs[MAX_ARGS];
+	int sargc=0;
+	char line[MAXPATHLEN];
+	char *p, *user=NULL;
+	extern int remote_version;
+	extern int am_sender;
+	extern char *shell_cmd;
+	extern int kludge_around_eof;
+	extern char *bind_address;
+	extern int default_af_hint;
+       
+	if (argc == 0 && !am_sender) {
+		extern int list_only;
+		list_only = 1;
+	}
 
-	/* This is redundant with code in start_inband_exchange(), but this
-	 * short-circuits a problem in the client before we open a socket,
-	 * and the extra check won't hurt. */
+        /* This is just a friendliness enhancement: if the connection
+         * is to an rsyncd then there is no point specifying the -e option.
+         * Note that this is only set if the -e was explicitly specified,
+         * not if the environment variable just happens to be set.
+         * See http://lists.samba.org/pipermail/rsync/2000-September/002744.html
+         */
+        if (shell_cmd) {
+                rprintf(FERROR, "WARNING: --rsh or -e option ignored when "
+                        "connecting to rsync daemon\n");
+                /* continue */
+        }
+        
 	if (*path == '/') {
-		rprintf(FERROR,
-			"ERROR: The remote path must start with a module name not a /\n");
+		rprintf(FERROR,"ERROR: The remote path must start with a module name not a /\n");
 		return -1;
 	}
 
-	if ((p = strrchr(host, '@')) != NULL) {
+	p = strchr(host, '@');
+	if (p) {
 		user = host;
 		host = p+1;
-		*p = '\0';
+		*p = 0;
 	}
 
-	fd = open_socket_out_wrapped(host, rsync_port, bind_address,
-				     default_af_hint);
-	if (fd == -1)
+	if (!user) user = getenv("USER");
+	if (!user) user = getenv("LOGNAME");
+
+	fd = open_socket_out_wrapped (host, rsync_port, bind_address,
+				      default_af_hint);
+	if (fd == -1) {
 		exit_cleanup(RERR_SOCKETIO);
-
-	ret = start_inband_exchange(user, path, fd, fd, argc);
-
-	return ret ? ret : client_run(fd, fd, -1, argc, argv);
-}
-
-int start_inband_exchange(char *user, char *path, int f_in, int f_out, 
-			  int argc)
-{
-	int i;
-	char *sargs[MAX_ARGS];
-	int sargc = 0;
-	char line[MAXPATHLEN];
-	char *p;
-
-	if (argc == 0 && !am_sender)
-		list_only |= 1;
-
-	if (*path == '/') {
-		rprintf(FERROR,
-			"ERROR: The remote path must start with a module name\n");
-		return -1;
 	}
-
-	if (!user)
-		user = getenv("USER");
-	if (!user)
-		user = getenv("LOGNAME");
-
-	io_printf(f_out, "@RSYNCD: %d\n", protocol_version);
-
-	if (!read_line(f_in, line, sizeof line - 1)) {
-		rprintf(FERROR, "rsync: did not see server greeting\n");
-		return -1;
-	}
-
-	if (sscanf(line,"@RSYNCD: %d", &remote_protocol) != 1) {
-		/* note that read_line strips of \n or \r */
-		rprintf(FERROR, "rsync: server sent \"%s\" rather than greeting\n",
-			line);
-		return -1;
-	}
-	if (protocol_version > remote_protocol)
-		protocol_version = remote_protocol;
-
-	if (list_only && protocol_version >= 29)
-		list_only |= 2;
-
-	/* set daemon_over_rsh to false since we need to build the
-	 * true set of args passed through the rsh/ssh connection;
-	 * this is a no-op for direct-socket-connection mode */
-	daemon_over_rsh = 0;
-	server_options(sargs, &sargc);
+	
+	server_options(sargs,&sargc);
 
 	sargs[sargc++] = ".";
 
-	if (path && *path)
+	if (path && *path) 
 		sargs[sargc++] = path;
 
 	sargs[sargc] = NULL;
 
-	if (verbose > 1)
-		print_child_argv(sargs);
+	io_printf(fd,"@RSYNCD: %d\n", PROTOCOL_VERSION);
+
+	if (!read_line(fd, line, sizeof(line)-1)) {
+		return -1;
+	}
+
+	if (sscanf(line,"@RSYNCD: %d", &remote_version) != 1) {
+		return -1;
+	}
 
 	p = strchr(path,'/');
 	if (p) *p = 0;
-	io_printf(f_out, "%s\n", path);
+	io_printf(fd,"%s\n",path);
 	if (p) *p = '/';
 
 	/* Old servers may just drop the connection here,
 	 rather than sending a proper EXIT command.  Yuck. */
-	kluge_around_eof = list_only && protocol_version < 25 ? 1 : 0;
+	kludge_around_eof = remote_version < 25;
 
 	while (1) {
-		if (!read_line(f_in, line, sizeof line - 1)) {
-			rprintf(FERROR, "rsync: didn't get server startup line\n");
+		if (!read_line(fd, line, sizeof(line)-1)) {
 			return -1;
 		}
 
 		if (strncmp(line,"@RSYNCD: AUTHREQD ",18) == 0) {
-			auth_client(f_out, user, line+18);
+			auth_client(fd, user, line+18);
 			continue;
 		}
 
-		if (strcmp(line,"@RSYNCD: OK") == 0)
-			break;
+		if (strcmp(line,"@RSYNCD: OK") == 0) break;
 
-		if (strcmp(line,"@RSYNCD: EXIT") == 0) {
-			/* This is sent by recent versions of the
-			 * server to terminate the listing of modules.
-			 * We don't want to go on and transfer
-			 * anything; just exit. */
-			exit(0);
-		}
+		if (strcmp(line,"@RSYNCD: EXIT") == 0) exit(0);
 
-		if (strncmp(line, "@ERROR", 6) == 0) {
-			rprintf(FERROR, "%s\n", line);
-			/* This is always fatal; the server will now
-			 * close the socket. */
-			return -1;
-		}
-
-		rprintf(FINFO, "%s\n", line);
+		rprintf(FINFO,"%s\n", line);
 	}
-	kluge_around_eof = 0;
+	kludge_around_eof = False;
 
-	for (i = 0; i < sargc; i++) {
-		io_printf(f_out, "%s\n", sargs[i]);
+	for (i=0;i<sargc;i++) {
+		io_printf(fd,"%s\n", sargs[i]);
 	}
-	io_printf(f_out, "\n");
+	io_printf(fd,"\n");
 
-	if (protocol_version < 23) {
-		if (protocol_version == 22 || !am_sender)
-			io_start_multiplex_in();
+	if (remote_version < 23) {
+		if (remote_version == 22 || (remote_version > 17 && !am_sender))
+			io_start_multiplex_in(fd);
 	}
 
-	return 0;
+	return client_run(fd, fd, -1, argc, argv);
 }
 
 
 
-static int rsync_module(int f_in, int f_out, int i)
+static int rsync_module(int fd, int i)
 {
-	int argc = 0;
-	int maxargs;
-	char **argv;
+	int argc=0;
+	char *argv[MAX_ARGS];
 	char **argp;
 	char line[MAXPATHLEN];
 	uid_t uid = (uid_t)-2;  /* canonically "nobody" */
 	gid_t gid = (gid_t)-2;
 	char *p;
-	char *addr = client_addr(f_in);
-	char *host = client_name(f_in);
+	char *addr = client_addr(fd);
+	char *host = client_name(fd);
 	char *name = lp_name(i);
 	int use_chroot = lp_use_chroot(i);
-	int start_glob = 0;
+	int start_glob=0;
 	int ret;
-	char *request = NULL;
+	char *request=NULL;
+	extern int am_sender;
+	extern int remote_version;
+	extern int am_root;
 
 	if (!allow_access(addr, host, lp_hosts_allow(i), lp_hosts_deny(i))) {
-		rprintf(FLOG, "rsync denied on module %s from %s (%s)\n",
+		rprintf(FERROR,"rsync denied on module %s from %s (%s)\n",
 			name, host, addr);
-		if (!lp_list(i))
-			io_printf(f_out, "@ERROR: Unknown module '%s'\n", name);
-		else {
-			io_printf(f_out,
-				  "@ERROR: access denied to %s from %s (%s)\n",
-				  name, host, addr);
-		}
+		io_printf(fd,"@ERROR: access denied to %s from %s (%s)\n",
+			  name, host, addr);
 		return -1;
 	}
 
-	if (am_daemon && am_server) {
-		rprintf(FLOG, "rsync allowed access on module %s from %s (%s)\n",
-			name, host, addr);
-	}
-
 	if (!claim_connection(lp_lock_file(i), lp_max_connections(i))) {
 		if (errno) {
-			rsyserr(FLOG, errno, "failed to open lock file %s",
-				safe_fname(lp_lock_file(i)));
-			io_printf(f_out, "@ERROR: failed to open lock file\n");
+			rprintf(FERROR,"failed to open lock file %s : %s\n",
+				lp_lock_file(i), strerror(errno));
+			io_printf(fd,"@ERROR: failed to open lock file %s : %s\n",
+				  lp_lock_file(i), strerror(errno));
 		} else {
-			rprintf(FLOG, "max connections (%d) reached\n",
-				lp_max_connections(i));
-			io_printf(f_out, "@ERROR: max connections (%d) reached -- try again later\n",
+			rprintf(FERROR,"max connections (%d) reached\n",
 				lp_max_connections(i));
+			io_printf(fd,"@ERROR: max connections (%d) reached - try again later\n", lp_max_connections(i));
 		}
 		return -1;
 	}
 
-	auth_user = auth_server(f_in, f_out, i, host, addr, "@RSYNCD: AUTHREQD ");
+	
+	auth_user = auth_server(fd, i, addr, "@RSYNCD: AUTHREQD ");
 
 	if (!auth_user) {
-		io_printf(f_out, "@ERROR: auth failed on module %s\n", name);
-		return -1;
+		rprintf(FERROR,"auth failed on module %s from %s (%s)\n",
+			name, client_name(fd), client_addr(fd));
+		io_printf(fd,"@ERROR: auth failed on module %s\n",name);
+		return -1;		
 	}
 
 	module_id = i;
 
-	if (lp_read_only(i))
-		read_only = 1;
-
-	if (lp_transfer_logging(i)) {
-		if (log_format_has(lp_log_format(i), 'i'))
-			daemon_log_format_has_i = 1;
-		if (daemon_log_format_has_i
-		    || log_format_has(lp_log_format(i), 'o'))
-			daemon_log_format_has_o_or_i = 1;
-	}
-
-	am_root = (MY_UID() == 0);
+	am_root = (getuid() == 0);
 
 	if (am_root) {
 		p = lp_uid(i);
 		if (!name_to_uid(p, &uid)) {
-			if (!isdigit(*(unsigned char *)p)) {
-				rprintf(FLOG, "Invalid uid %s\n", p);
-				io_printf(f_out, "@ERROR: invalid uid %s\n", p);
+			if (!isdigit(*p)) {
+				rprintf(FERROR,"Invalid uid %s\n", p);
+				io_printf(fd,"@ERROR: invalid uid %s\n", p);
 				return -1;
-			}
+			} 
 			uid = atoi(p);
 		}
 
 		p = lp_gid(i);
 		if (!name_to_gid(p, &gid)) {
-			if (!isdigit(*(unsigned char *)p)) {
-				rprintf(FLOG, "Invalid gid %s\n", p);
-				io_printf(f_out, "@ERROR: invalid gid %s\n", p);
+			if (!isdigit(*p)) {
+				rprintf(FERROR,"Invalid gid %s\n", p);
+				io_printf(fd,"@ERROR: invalid gid %s\n", p);
 				return -1;
-			}
+			} 
 			gid = atoi(p);
 		}
 	}
+        
+        /* TODO: If we're not root, but the configuration requests
+         * that we change to some uid other than the current one, then
+         * log a warning. */
 
-	/* TODO: If we're not root, but the configuration requests
-	 * that we change to some uid other than the current one, then
-	 * log a warning. */
-
-	/* TODO: Perhaps take a list of gids, and make them into the
-	 * supplementary groups. */
-
-	if (use_chroot || (module_dirlen = strlen(lp_path(i))) == 1) {
-		module_dirlen = 0;
-		set_filter_dir("/", 1);
-	} else
-		set_filter_dir(lp_path(i), module_dirlen);
-
-	p = lp_filter(i);
-	parse_rule(&server_filter_list, p, MATCHFLG_WORD_SPLIT,
-		   XFLG_ANCHORED2ABS);
+        /* TODO: Perhaps take a list of gids, and make them into the
+         * supplementary groups. */
 
 	p = lp_include_from(i);
-	parse_filter_file(&server_filter_list, p, MATCHFLG_INCLUDE,
-	    XFLG_ANCHORED2ABS | XFLG_OLD_PREFIXES | XFLG_FATAL_ERRORS);
+	add_exclude_file(p, 1, 1);
 
 	p = lp_include(i);
-	parse_rule(&server_filter_list, p,
-		   MATCHFLG_INCLUDE | MATCHFLG_WORD_SPLIT,
-		   XFLG_ANCHORED2ABS | XFLG_OLD_PREFIXES);
+	add_include_line(p);
 
 	p = lp_exclude_from(i);
-	parse_filter_file(&server_filter_list, p, 0,
-	    XFLG_ANCHORED2ABS | XFLG_OLD_PREFIXES | XFLG_FATAL_ERRORS);
+	add_exclude_file(p, 1, 0);
 
 	p = lp_exclude(i);
-	parse_rule(&server_filter_list, p, MATCHFLG_WORD_SPLIT,
-		   XFLG_ANCHORED2ABS | XFLG_OLD_PREFIXES);
+	add_exclude_line(p);
 
 	log_init();
 
@@ -361,116 +259,103 @@ static int rsync_module(int f_in, int f_out, int i)
 		 * in which case we fail.
 		 */
 		if (chroot(lp_path(i))) {
-			rsyserr(FLOG, errno, "chroot %s failed",
-				safe_fname(lp_path(i)));
-			io_printf(f_out, "@ERROR: chroot failed\n");
+			rsyserr(FERROR, errno, "chroot %s failed", lp_path(i));
+			io_printf(fd,"@ERROR: chroot failed\n");
 			return -1;
 		}
 
-		if (!push_dir("/")) {
-			rsyserr(FLOG, errno, "chdir %s failed\n",
-				safe_fname(lp_path(i)));
-			io_printf(f_out, "@ERROR: chdir failed\n");
+		if (!push_dir("/", 0)) {
+                        rsyserr(FERROR, errno, "chdir %s failed\n", lp_path(i));
+			io_printf(fd,"@ERROR: chdir failed\n");
 			return -1;
 		}
 
 	} else {
-		if (!push_dir(lp_path(i))) {
-			rsyserr(FLOG, errno, "chdir %s failed\n",
-				safe_fname(lp_path(i)));
-			io_printf(f_out, "@ERROR: chdir failed\n");
+		if (!push_dir(lp_path(i), 0)) {
+			rsyserr(FERROR, errno, "chdir %s failed\n", lp_path(i));
+			io_printf(fd,"@ERROR: chdir failed\n");
 			return -1;
 		}
 		sanitize_paths = 1;
 	}
 
 	if (am_root) {
-		/* XXXX: You could argue that if the daemon is started
-		 * by a non-root user and they explicitly specify a
-		 * gid, then we should try to change to that gid --
-		 * this could be possible if it's already in their
-		 * supplementary groups. */
-
-		/* TODO: Perhaps we need to document that if rsyncd is
-		 * started by somebody other than root it will inherit
-		 * all their supplementary groups. */
-
 		if (setgid(gid)) {
-			rsyserr(FLOG, errno, "setgid %d failed", (int)gid);
-			io_printf(f_out, "@ERROR: setgid failed\n");
+			rsyserr(FERROR, errno, "setgid %d failed", (int) gid);
+			io_printf(fd,"@ERROR: setgid failed\n");
 			return -1;
 		}
-#ifdef HAVE_SETGROUPS
-		/* Get rid of any supplementary groups this process
-		 * might have inheristed. */
-		if (setgroups(1, &gid)) {
-			rsyserr(FLOG, errno, "setgroups failed");
-			io_printf(f_out, "@ERROR: setgroups failed\n");
-			return -1;
-		}
-#endif
 
 		if (setuid(uid)) {
-			rsyserr(FLOG, errno, "setuid %d failed", (int)uid);
-			io_printf(f_out, "@ERROR: setuid failed\n");
+			rsyserr(FERROR, errno, "setuid %d failed", (int) uid);
+			io_printf(fd,"@ERROR: setuid failed\n");
 			return -1;
 		}
 
-		am_root = (MY_UID() == 0);
+		am_root = (getuid() == 0);
 	}
 
-	io_printf(f_out, "@RSYNCD: OK\n");
+	io_printf(fd,"@RSYNCD: OK\n");
 
-	maxargs = MAX_ARGS;
-	if (!(argv = new_array(char *, maxargs)))
-		out_of_memory("rsync_module");
 	argv[argc++] = "rsyncd";
 
 	while (1) {
-		if (!read_line(f_in, line, sizeof line - 1))
+		if (!read_line(fd, line, sizeof(line)-1)) {
 			return -1;
+		}
 
-		if (!*line)
-			break;
+		if (!*line) break;
 
 		p = line;
 
-		if (argc == maxargs) {
-			maxargs += MAX_ARGS;
-			if (!(argv = realloc_array(argv, char *, maxargs)))
-				out_of_memory("rsync_module");
+		argv[argc] = strdup(p);
+		if (!argv[argc]) {
+			return -1;
 		}
-		if (!(argv[argc] = strdup(p)))
-			out_of_memory("rsync_module");
 
 		if (start_glob) {
 			if (start_glob == 1) {
 				request = strdup(p);
 				start_glob++;
 			}
-			glob_expand(name, &argv, &argc, &maxargs);
-		} else
+			glob_expand(name, argv, &argc, MAX_ARGS);
+		} else {
 			argc++;
+		}
 
-		if (strcmp(line, ".") == 0)
+		if (strcmp(line,".") == 0) {
 			start_glob = 1;
+		}
+
+		if (argc == MAX_ARGS) {
+			return -1;
+		}
 	}
 
-	verbose = 0; /* future verbosity is controlled by client options */
-	argp = argv;
-	ret = parse_arguments(&argc, (const char ***) &argp, 0);
+	if (sanitize_paths) {
+		/*
+		 * Note that this is applied to all parameters, whether or not
+		 *    they are filenames, but no other legal parameters contain
+		 *    the forms that need to be sanitized so it doesn't hurt;
+		 *    it is not known at this point which parameters are files
+		 *    and which aren't.
+		 */
+		for (i = 1; i < argc; i++) {
+			sanitize_path(argv[i], NULL);
+		}
+	}
 
-	if (filesfrom_fd == 0)
-		filesfrom_fd = f_in;
+        argp = argv;
+	ret = parse_arguments(&argc, (const char ***) &argp, 0);
 
 	if (request) {
 		if (*auth_user) {
-			rprintf(FLOG, "rsync %s %s from %s@%s (%s)\n",
-				am_sender ? "on" : "to",
+			rprintf(FINFO,"rsync %s %s from %s@%s (%s)\n",
+				am_sender?"on":"to",
 				request, auth_user, host, addr);
 		} else {
-			rprintf(FLOG, "rsync %s %s from %s (%s)\n",
-				am_sender ? "on" : "to",
+			rprintf(FINFO,"rsync %s %s from %s (%s)\n",
+				am_sender?"on":"to",
 				request, host, addr);
 		}
 		free(request);
@@ -478,49 +363,33 @@ static int rsync_module(int f_in, int f_out, int i)
 
 #ifndef DEBUG
 	/* don't allow the logs to be flooded too fast */
-	if (verbose > lp_max_verbosity())
-		verbose = lp_max_verbosity();
+	if (verbose > 1) verbose = 1;
 #endif
 
-	if (protocol_version < 23
-	    && (protocol_version == 22 || am_sender))
-		io_start_multiplex_out();
-	else if (!ret) {
-		/* We have to get I/O multiplexing started so that we can
-		 * get the error back to the client.  This means getting
-		 * the protocol setup finished first in later versions. */
-		setup_protocol(f_out, f_in);
-		if (!am_sender) {
-			/* Since we failed in our option parsing, we may not
-			 * have finished parsing that the client sent us a
-			 * --files-from option, so look for it manually.
-			 * Without this, the socket would be in the wrong
-			 * state for the upcoming error message. */
-			if (!files_from) {
-				int i;
-				for (i = 0; i < argc; i++) {
-					if (strncmp(argv[i], "--files-from", 12) == 0) {
-						files_from = "";
-						break;
-					}
-				}
-			}
-			if (files_from)
-				write_byte(f_out, 0);
-		}
-		io_start_multiplex_out();
+	if (remote_version < 23) {
+		if (remote_version == 22 || (remote_version > 17 && am_sender))
+			io_start_multiplex_out(fd);
 	}
+        
+        /* For later protocol versions, we don't start multiplexing
+         * until we've configured nonblocking in start_server.  That
+         * means we're in a sticky situation now: there's no way to
+         * convey errors to the client. */
 
+        /* FIXME: Hold off on reporting option processing errors until
+         * we've set up nonblocking and multiplexed IO and can get the
+         * message back to them. */
 	if (!ret) {
-		option_error();
-		msleep(400);
-		exit_cleanup(RERR_UNSUPPORTED);
+                option_error();
+                exit_cleanup(RERR_UNSUPPORTED);
 	}
 
-	if (lp_timeout(i) && lp_timeout(i) > io_timeout)
-		set_io_timeout(lp_timeout(i));
+	if (lp_timeout(i)) {
+		extern int io_timeout;
+		io_timeout = lp_timeout(i);
+	}
 
-	start_server(f_in, f_out, argc, argp);
+	start_server(fd, fd, argc, argp);
 
 	return 0;
 }
@@ -531,143 +400,137 @@ static void send_listing(int fd)
 {
 	int n = lp_numservices();
 	int i;
+	extern int remote_version;
 
-	for (i = 0; i < n; i++) {
+	for (i=0;i<n;i++)
 		if (lp_list(i))
-			io_printf(fd, "%-15s\t%s\n", lp_name(i), lp_comment(i));
-	}
+		    io_printf(fd, "%-15s\t%s\n", lp_name(i), lp_comment(i));
 
-	if (protocol_version >= 25)
+	if (remote_version >= 25)
 		io_printf(fd,"@RSYNCD: EXIT\n");
 }
 
-/* this is called when a connection is established to a client
+/* this is called when a socket connection is established to a client
    and we want to start talking. The setup of the system is done from
    here */
-int start_daemon(int f_in, int f_out)
+static int start_daemon(int fd)
 {
 	char line[200];
 	char *motd;
-	int i;
+	int i = -1;
+	extern char *config_file;
+	extern int remote_version;
 
-	io_set_sock_fds(f_in, f_out);
-
-	if (!lp_load(config_file, 0))
+	if (!lp_load(config_file, 0)) {
 		exit_cleanup(RERR_SYNTAX);
-
-	log_init();
-
-	if (!am_server) {
-		set_socket_options(f_in, "SO_KEEPALIVE");
-		set_socket_options(f_in, lp_socket_options());
-		set_nonblocking(f_in);
 	}
 
-	io_printf(f_out, "@RSYNCD: %d\n", protocol_version);
+	set_socket_options(fd,"SO_KEEPALIVE");
+	set_socket_options(fd,lp_socket_options());
+	set_nonblocking(fd);
+
+	io_printf(fd,"@RSYNCD: %d\n", PROTOCOL_VERSION);
 
 	motd = lp_motd_file();
 	if (motd && *motd) {
 		FILE *f = fopen(motd,"r");
 		while (f && !feof(f)) {
-			int len = fread(line, 1, sizeof line - 1, f);
+			int len = fread(line, 1, sizeof(line)-1, f);
 			if (len > 0) {
 				line[len] = 0;
-				io_printf(f_out, "%s", line);
+				io_printf(fd,"%s", line);
 			}
 		}
-		if (f)
-			fclose(f);
-		io_printf(f_out, "\n");
+		if (f) fclose(f);
+		io_printf(fd,"\n");
 	}
 
-	if (!read_line(f_in, line, sizeof line - 1))
-		return -1;
-
-	if (sscanf(line,"@RSYNCD: %d", &remote_protocol) != 1) {
-		io_printf(f_out, "@ERROR: protocol startup error\n");
-		return -1;
-	}
-	if (protocol_version > remote_protocol)
-		protocol_version = remote_protocol;
-
-	line[0] = 0;
-	if (!read_line(f_in, line, sizeof line - 1))
-		return -1;
-
-	if (!*line || strcmp(line, "#list") == 0) {
-		send_listing(f_out);
+	if (!read_line(fd, line, sizeof(line)-1)) {
 		return -1;
 	}
 
-	if (*line == '#') {
-		/* it's some sort of command that I don't understand */
-		io_printf(f_out, "@ERROR: Unknown command '%s'\n", line);
+	if (sscanf(line,"@RSYNCD: %d", &remote_version) != 1) {
+		io_printf(fd,"@ERROR: protocol startup error\n");
 		return -1;
+	}	
+
+	while (i == -1) {
+		line[0] = 0;
+		if (!read_line(fd, line, sizeof(line)-1)) {
+			return -1;
+		}
+
+		if (!*line || strcmp(line,"#list")==0) {
+			send_listing(fd);
+			return -1;
+		} 
+
+		if (*line == '#') {
+			/* it's some sort of command that I don't understand */
+			io_printf(fd,"@ERROR: Unknown command '%s'\n", line);
+			return -1;
+		}
+
+		i = lp_number(line);
+		if (i == -1) {
+			io_printf(fd,"@ERROR: Unknown module '%s'\n", line);
+			return -1;
+		}
 	}
 
-	if ((i = lp_number(line)) < 0) {
-		char *addr = client_addr(f_in);
-		char *host = client_name(f_in);
-		rprintf(FLOG, "unknown module '%s' tried from %s (%s)\n",
-			line, host, addr);
-		io_printf(f_out, "@ERROR: Unknown module '%s'\n", line);
-		return -1;
-	}
-
-	return rsync_module(f_in, f_out, i);
+	return rsync_module(fd, i);
 }
 
 
 int daemon_main(void)
 {
+	extern char *config_file;
+	extern int orig_umask;
 	char *pid_file;
+	extern int no_detach;
 
 	if (is_a_socket(STDIN_FILENO)) {
 		int i;
 
 		/* we are running via inetd - close off stdout and
-		 * stderr so that library functions (and getopt) don't
-		 * try to use them. Redirect them to /dev/null */
-		for (i = 1; i < 3; i++) {
-			close(i);
+		   stderr so that library functions (and getopt) don't
+		   try to use them. Redirect them to /dev/null */
+		for (i=1;i<3;i++) {
+			close(i); 
 			open("/dev/null", O_RDWR);
 		}
 
-		return start_daemon(STDIN_FILENO, STDIN_FILENO);
+		return start_daemon(STDIN_FILENO);
 	}
 
 	if (!no_detach)
-		become_daemon();
+	    become_daemon();
 
-	if (!lp_load(config_file, 1))
+	if (!lp_load(config_file, 1)) {
 		exit_cleanup(RERR_SYNTAX);
-
-	if (rsync_port == 0 && (rsync_port = lp_rsync_port()) == 0)
-		rsync_port = RSYNC_PORT;
-	if (bind_address == NULL && *lp_bind_address())
-		bind_address = lp_bind_address();
+	}
 
 	log_init();
 
-	rprintf(FLOG, "rsyncd version %s starting, listening on port %d\n",
-		RSYNC_VERSION, rsync_port);
-	/* TODO: If listening on a particular address, then show that
-	 * address too.  In fact, why not just do inet_ntop on the
-	 * local address??? */
+	rprintf(FINFO, "rsyncd version %s starting, listening on port %d\n",
+		RSYNC_VERSION,
+                rsync_port);
+        /* TODO: If listening on a particular address, then show that
+         * address too.  In fact, why not just do inet_ntop on the
+         * local address??? */
 
 	if (((pid_file = lp_pid_file()) != NULL) && (*pid_file != '\0')) {
 		char pidbuf[16];
 		int fd;
-		pid_t pid = getpid();
+		int pid = (int) getpid();
 		cleanup_set_pid(pid);
 		if ((fd = do_open(lp_pid_file(), O_WRONLY|O_CREAT|O_TRUNC,
 					0666 & ~orig_umask)) == -1) {
-			cleanup_set_pid(0);
-			rsyserr(FLOG, errno, "failed to create pid file %s",
-				safe_fname(pid_file));
-			exit_cleanup(RERR_FILEIO);
+		    cleanup_set_pid(0);
+		    rsyserr(FLOG, errno, "failed to create pid file %s", pid_file);
+		    exit_cleanup(RERR_FILEIO);
 		}
-		snprintf(pidbuf, sizeof pidbuf, "%ld\n", (long)pid);
+		snprintf(pidbuf, sizeof(pidbuf), "%d\n", pid);
 		write(fd, pidbuf, strlen(pidbuf));
 		close(fd);
 	}
@@ -675,3 +538,4 @@ int daemon_main(void)
 	start_accept_loop(rsync_port, start_daemon);
 	return -1;
 }
+

compat.c

@@ -17,93 +17,59 @@
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
-/**
- * @file compat.c
- *
- * Compatibility routines for older rsync protocol versions.
- **/
+/* compatability routines for older rsync protocol versions */
 
 #include "rsync.h"
 
-int remote_protocol = 0;
-
-extern int verbose;
 extern int am_server;
-extern int am_sender;
-extern int inplace;
-extern int fuzzy_basis;
-extern int read_batch;
+
+extern int preserve_links;
+extern int preserve_perms;
+extern int preserve_devices;
+extern int preserve_uid;
+extern int preserve_gid;
+extern int preserve_times;
+extern int always_checksum;
 extern int checksum_seed;
-extern int basis_dir_cnt;
-extern int protocol_version;
-extern char *dest_option;
+
+
+extern int remote_version;
+extern int verbose;
+
+extern int read_batch;  /* dw */
+extern int write_batch;  /* dw */
 
 void setup_protocol(int f_out,int f_in)
 {
-	if (remote_protocol == 0) {
-		if (!read_batch)
-			write_int(f_out, protocol_version);
-		remote_protocol = read_int(f_in);
-		if (protocol_version > remote_protocol)
-			protocol_version = remote_protocol;
-	}
-	if (read_batch && remote_protocol > protocol_version) {
-	        rprintf(FERROR, "The protocol version in the batch file is too new (%d > %d).\n",
-			remote_protocol, protocol_version);
-		exit_cleanup(RERR_PROTOCOL);
+	if (remote_version == 0) {
+		if (am_server) {
+			remote_version = read_int(f_in);
+			write_int(f_out,PROTOCOL_VERSION);
+		} else {
+			write_int(f_out,PROTOCOL_VERSION);
+			remote_version = read_int(f_in);
+		}
 	}
 
-	if (verbose > 3) {
-		rprintf(FINFO, "(%s) Protocol versions: remote=%d, negotiated=%d\n",
-			am_server? "Server" : "Client", remote_protocol, protocol_version);
-	}
-	if (remote_protocol < MIN_PROTOCOL_VERSION
-	 || remote_protocol > MAX_PROTOCOL_VERSION) {
-		rprintf(FERROR,"protocol version mismatch -- is your shell clean?\n");
+	if (remote_version < MIN_PROTOCOL_VERSION ||
+	    remote_version > MAX_PROTOCOL_VERSION) {
+		rprintf(FERROR,"protocol version mismatch - is your shell clean?\n");
 		rprintf(FERROR,"(see the rsync man page for an explanation)\n");
 		exit_cleanup(RERR_PROTOCOL);
-	}
-	if (remote_protocol < OLD_PROTOCOL_VERSION) {
-		rprintf(FINFO,"%s is very old version of rsync, upgrade recommended.\n",
-			am_server? "Client" : "Server");
-	}
-	if (protocol_version < MIN_PROTOCOL_VERSION) {
-		rprintf(FERROR, "--protocol must be at least %d on the %s.\n",
-			MIN_PROTOCOL_VERSION, am_server? "Server" : "Client");
-		exit_cleanup(RERR_PROTOCOL);
-	}
-	if (protocol_version > PROTOCOL_VERSION) {
-		rprintf(FERROR, "--protocol must be no more than %d on the %s.\n",
-			PROTOCOL_VERSION, am_server? "Server" : "Client");
-		exit_cleanup(RERR_PROTOCOL);
-	}
-
-	if (fuzzy_basis && protocol_version < 29) {
-		rprintf(FERROR,
-			"--fuzzy requires protocol 29 or higher (negotiated %d).\n",
-			protocol_version);
-		exit_cleanup(RERR_PROTOCOL);
-	}
-
-	if (basis_dir_cnt && inplace && protocol_version < 29) {
-		rprintf(FERROR,
-			"%s with --inplace requires protocol 29 or higher (negotiated %d).\n",
-			dest_option, protocol_version);
-		exit_cleanup(RERR_PROTOCOL);
-	}
-
-	if (basis_dir_cnt > 1 && protocol_version < 29) {
-		rprintf(FERROR,
-			"Multiple %s options requires protocol 29 or higher (negotiated %d).\n",
-			dest_option, protocol_version);
-		exit_cleanup(RERR_PROTOCOL);
-	}
-
-	if (am_server) {
-		if (!checksum_seed)
+	}	
+	
+	if (remote_version >= 12) {
+		if (am_server) {
+		    if (read_batch || write_batch) /* dw */
+			checksum_seed = 32761;
+		    else
 			checksum_seed = time(NULL);
-		write_int(f_out, checksum_seed);
-	} else {
-		checksum_seed = read_int(f_in);
+			write_int(f_out,checksum_seed);
+		} else {
+			checksum_seed = read_int(f_in);
+		}
 	}
+	
+	checksum_init();
 }
+

config.guess

@@ -1,9 +1,9 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+#   Free Software Foundation, Inc.
 
-timestamp='2003-10-03'
+timestamp='2001-07-19'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -24,9 +24,8 @@ timestamp='2003-10-03'
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
-# Originally written by Per Bothner <per@bothner.com>.
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted ChangeLog entry.
+# Written by Per Bothner <bothner@cygnus.com>.
+# Please send patches to <config-patches@gnu.org>.
 #
 # This script attempts to guess a canonical system name similar to
 # config.sub.  If it succeeds, it prints the system name on stdout, and
@@ -88,42 +87,30 @@ if test $# != 0; then
   exit 1
 fi
 
-trap 'exit 1' 1 2 15
 
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
+dummy=dummy-$$
+trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15
 
+# CC_FOR_BUILD -- compiler used by this script.
 # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
 # use `HOST_CC' if defined, but it is deprecated.
 
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,)    echo "int x;" > $dummy.c ;
-	for c in cc gcc c89 c99 ; do
-	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int dummy(){}" > $dummy.c ;
+	for c in cc gcc c89 ; do
+	  ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ;
+	  if test $? = 0 ; then
 	     CC_FOR_BUILD="$c"; break ;
 	  fi ;
 	done ;
+	rm -f $dummy.c $dummy.o $dummy.rel ;
 	if test x"$CC_FOR_BUILD" = x ; then
 	  CC_FOR_BUILD=no_compiler_found ;
 	fi
 	;;
  ,,*)   CC_FOR_BUILD=$CC ;;
  ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-esac ;'
+esac'
 
 # This is needed to find uname on a Pyramid OSx when run in the BSD universe.
 # (ghazi@noc.rutgers.edu 1994-08-24)
@@ -140,30 +127,29 @@ UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
 
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:NetBSD:*:*)
-	# NetBSD (nbsd) targets should (where applicable) match one or
+	# Netbsd (nbsd) targets should (where applicable) match one or
 	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
 	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
 	# switched to ELF, *-*-netbsd* would select the old
 	# object file format.  This provides both forward
 	# compatibility and a consistent mechanism for selecting the
 	# object file format.
-	#
-	# Note: NetBSD doesn't particularly care about the vendor
-	# portion of the name.  We always set it to "unknown".
-	sysctl="sysctl -n hw.machine_arch"
-	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
-	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
-	case "${UNAME_MACHINE_ARCH}" in
-	    armeb) machine=armeb-unknown ;;
-	    arm*) machine=arm-unknown ;;
-	    sh3el) machine=shl-unknown ;;
-	    sh3eb) machine=sh-unknown ;;
-	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+	# Determine the machine/vendor (is the vendor relevant).
+	case "${UNAME_MACHINE}" in
+	    amiga) machine=m68k-unknown ;;
+	    arm32) machine=arm-unknown ;;
+	    atari*) machine=m68k-atari ;;
+	    sun3*) machine=m68k-sun ;;
+	    mac68k) machine=m68k-apple ;;
+	    macppc) machine=powerpc-apple ;;
+	    hp3[0-9][05]) machine=m68k-hp ;;
+	    ibmrt|romp-ibm) machine=romp-ibm ;;
+	    *) machine=${UNAME_MACHINE}-unknown ;;
 	esac
 	# The Operating System including object format, if it has switched
 	# to ELF recently, or will in the future.
-	case "${UNAME_MACHINE_ARCH}" in
-	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+	case "${UNAME_MACHINE}" in
+	    i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k)
 		eval $set_cc_for_build
 		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
 			| grep __ELF__ >/dev/null
@@ -180,112 +166,72 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 		;;
 	esac
 	# The OS release
-	# Debian GNU/NetBSD machines have a different userland, and
-	# thus, need a distinct triplet. However, they do not need
-	# kernel version information, so it can be replaced with a
-	# suitable tag, in the style of linux-gnu.
-	case "${UNAME_VERSION}" in
-	    Debian*)
-		release='-gnu'
-		;;
-	    *)
-		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-		;;
-	esac
+	release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
 	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
 	# contains redundant information, the shorter form:
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
 	echo "${machine}-${os}${release}"
 	exit 0 ;;
-    amiga:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    arc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    hp300:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mac68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    macppc:OpenBSD:*:*)
-	echo powerpc-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme88k:OpenBSD:*:*)
-	echo m88k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvmeppc:OpenBSD:*:*)
-	echo powerpc-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    pmax:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sgi:OpenBSD:*:*)
-	echo mipseb-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sun3:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    wgrisc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    *:OpenBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
     alpha:OSF1:*:*)
 	if test $UNAME_RELEASE = "V4.0"; then
 		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
 	fi
-	# According to Compaq, /usr/sbin/psrinfo has been available on
-	# OSF/1 and Tru64 systems produced since 1995.  I hope that
-	# covers most systems running today.  This code pipes the CPU
-	# types through head -n 1, so we only detect the type of CPU 0.
-	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
-	case "$ALPHA_CPU_TYPE" in
-	    "EV4 (21064)")
-		UNAME_MACHINE="alpha" ;;
-	    "EV4.5 (21064)")
-		UNAME_MACHINE="alpha" ;;
-	    "LCA4 (21066/21068)")
-		UNAME_MACHINE="alpha" ;;
-	    "EV5 (21164)")
-		UNAME_MACHINE="alphaev5" ;;
-	    "EV5.6 (21164A)")
-		UNAME_MACHINE="alphaev56" ;;
-	    "EV5.6 (21164PC)")
-		UNAME_MACHINE="alphapca56" ;;
-	    "EV5.7 (21164PC)")
-		UNAME_MACHINE="alphapca57" ;;
-	    "EV6 (21264)")
-		UNAME_MACHINE="alphaev6" ;;
-	    "EV6.7 (21264A)")
-		UNAME_MACHINE="alphaev67" ;;
-	    "EV6.8CB (21264C)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.8AL (21264B)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.8CX (21264D)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.9A (21264/EV69A)")
-		UNAME_MACHINE="alphaev69" ;;
-	    "EV7 (21364)")
-		UNAME_MACHINE="alphaev7" ;;
-	    "EV7.9 (21364A)")
-		UNAME_MACHINE="alphaev79" ;;
-	esac
 	# A Vn.n version is a released version.
 	# A Tn.n version is a released field test version.
 	# A Xn.n version is an unreleased experimental baselevel.
 	# 1.2 uses "1.2" for uname -r.
+	cat <<EOF >$dummy.s
+	.data
+\$Lformat:
+	.byte 37,100,45,37,120,10,0	# "%d-%x\n"
+
+	.text
+	.globl main
+	.align 4
+	.ent main
+main:
+	.frame \$30,16,\$26,0
+	ldgp \$29,0(\$27)
+	.prologue 1
+	.long 0x47e03d80 # implver \$0
+	lda \$2,-1
+	.long 0x47e20c21 # amask \$2,\$1
+	lda \$16,\$Lformat
+	mov \$0,\$17
+	not \$1,\$18
+	jsr \$26,printf
+	ldgp \$29,0(\$26)
+	mov 0,\$16
+	jsr \$26,exit
+	.end main
+EOF
+	eval $set_cc_for_build
+	$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+	if test "$?" = 0 ; then
+		case `./$dummy` in
+			0-0)
+				UNAME_MACHINE="alpha"
+				;;
+			1-0)
+				UNAME_MACHINE="alphaev5"
+				;;
+			1-1)
+				UNAME_MACHINE="alphaev56"
+				;;
+			1-101)
+				UNAME_MACHINE="alphapca56"
+				;;
+			2-303)
+				UNAME_MACHINE="alphaev6"
+				;;
+			2-307)
+				UNAME_MACHINE="alphaev67"
+				;;
+		esac
+	fi
+	rm -f $dummy.s $dummy
 	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
 	exit 0 ;;
-    Alpha*:OpenVMS:*:*)
-	echo alpha-hp-vms
-	exit 0 ;;
     Alpha\ *:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# Should we change UNAME_MACHINE based on the output of uname instead
@@ -298,11 +244,29 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     Amiga*:UNIX_System_V:4.0:*)
 	echo m68k-unknown-sysv4
 	exit 0;;
+    amiga:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
     *:[Aa]miga[Oo][Ss]:*:*)
 	echo ${UNAME_MACHINE}-unknown-amigaos
 	exit 0 ;;
-    *:[Mm]orph[Oo][Ss]:*:*)
-	echo ${UNAME_MACHINE}-unknown-morphos
+    arc64:OpenBSD:*:*)
+	echo mips64el-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    arc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    hkmips:OpenBSD:*:*)
+	echo mips-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    pmax:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sgi:OpenBSD:*:*)
+	echo mips-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    wgrisc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
     *:OS/390:*:*)
 	echo i370-ibm-openedition
@@ -324,13 +288,6 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     NILE*:*:*:dcosx)
 	echo pyramid-pyramid-svr4
 	exit 0 ;;
-    DRS?6000:unix:4.0:6*)
-	echo sparc-icl-nx6
-	exit 0 ;;
-    DRS?6000:UNIX_SV:4.2*:7*)
-	case `/usr/bin/uname -p` in
-	    sparc) echo sparc-icl-nx7 && exit 0 ;;
-	esac ;;
     sun4H:SunOS:5.*:*)
 	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit 0 ;;
@@ -359,7 +316,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	echo m68k-sun-sunos${UNAME_RELEASE}
 	exit 0 ;;
     sun*:*:4.2BSD:*)
-	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
 	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
 	case "`/bin/arch`" in
 	    sun3)
@@ -373,6 +330,9 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     aushp:SunOS:*:*)
 	echo sparc-auspex-sunos${UNAME_RELEASE}
 	exit 0 ;;
+    atari*:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
     # The situation for MiNT is a little confusing.  The machine name
     # can be virtually everything (everything which is not
     # "atarist" or "atariste" at least should have a processor
@@ -399,6 +359,18 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
         echo m68k-unknown-mint${UNAME_RELEASE}
         exit 0 ;;
+    sun3*:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mac68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme88k:OpenBSD:*:*)
+	echo m88k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
     powerpc:machten:*:*)
 	echo powerpc-apple-machten${UNAME_RELEASE}
 	exit 0 ;;
@@ -415,7 +387,6 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	echo clipper-intergraph-clix${UNAME_RELEASE}
 	exit 0 ;;
     mips:*:*:UMIPS | mips:*:*:RISCos)
-	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
 #ifdef __cplusplus
 #include <stdio.h>  /* for printf() prototype */
@@ -437,20 +408,16 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	  exit (-1);
 	}
 EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c \
-	  && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
-	  && exit 0
+	eval $set_cc_for_build
+	$CC_FOR_BUILD $dummy.c -o $dummy \
+	  && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+	  && rm -f $dummy.c $dummy && exit 0
+	rm -f $dummy.c $dummy
 	echo mips-mips-riscos${UNAME_RELEASE}
 	exit 0 ;;
     Motorola:PowerMAX_OS:*:*)
 	echo powerpc-motorola-powermax
 	exit 0 ;;
-    Motorola:*:4.3:PL8-*)
-	echo powerpc-harris-powermax
-	exit 0 ;;
-    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
-	echo powerpc-harris-powermax
-	exit 0 ;;
     Night_Hawk:Power_UNIX:*:*)
 	echo powerpc-harris-powerunix
 	exit 0 ;;
@@ -511,7 +478,6 @@ EOF
 	exit 0 ;;
     *:AIX:2:3)
 	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-		eval $set_cc_for_build
 		sed 's/^		//' << EOF >$dummy.c
 		#include <sys/systemcfg.h>
 
@@ -523,7 +489,9 @@ EOF
 			exit(0);
 			}
 EOF
-		$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
+		eval $set_cc_for_build
+		$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
+		rm -f $dummy.c $dummy
 		echo rs6000-ibm-aix3.2.5
 	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
 		echo rs6000-ibm-aix3.2.4
@@ -532,7 +500,7 @@ EOF
 	fi
 	exit 0 ;;
     *:AIX:*:[45])
-	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
 	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
 		IBM_ARCH=rs6000
 	else
@@ -572,8 +540,10 @@ EOF
 	    9000/31? )            HP_ARCH=m68000 ;;
 	    9000/[34]?? )         HP_ARCH=m68k ;;
 	    9000/[678][0-9][0-9])
-		if [ -x /usr/bin/getconf ]; then
-		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+              case "${HPUX_REV}" in
+                11.[0-9][0-9])
+                  if [ -x /usr/bin/getconf ]; then
+                    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
                     sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
                     case "${sc_cpu_version}" in
                       523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
@@ -582,13 +552,12 @@ EOF
                         case "${sc_kernel_bits}" in
                           32) HP_ARCH="hppa2.0n" ;;
                           64) HP_ARCH="hppa2.0w" ;;
-			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
                         esac ;;
                     esac
-		fi
-		if [ "${HP_ARCH}" = "" ]; then
-		    eval $set_cc_for_build
-		    sed 's/^              //' << EOF >$dummy.c
+                  fi ;;
+              esac
+              if [ "${HP_ARCH}" = "" ]; then
+              sed 's/^              //' << EOF >$dummy.c
 
               #define _HPUX_SOURCE
               #include <stdlib.h>
@@ -621,21 +590,12 @@ EOF
                   exit (0);
               }
 EOF
-		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
-		    test -z "$HP_ARCH" && HP_ARCH=hppa
-		fi ;;
+	eval $set_cc_for_build
+	(CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
+	if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
+	rm -f $dummy.c $dummy
+	fi ;;
 	esac
-	if [ ${HP_ARCH} = "hppa2.0w" ]
-	then
-	    # avoid double evaluation of $set_cc_for_build
-	    test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
-	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
-	    then
-		HP_ARCH="hppa2.0w"
-	    else
-		HP_ARCH="hppa64"
-	    fi
-	fi
 	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
 	exit 0 ;;
     ia64:HP-UX:*:*)
@@ -643,7 +603,6 @@ EOF
 	echo ia64-hp-hpux${HPUX_REV}
 	exit 0 ;;
     3050*:HI-UX:*:*)
-	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
 	#include <unistd.h>
 	int
@@ -669,7 +628,9 @@ EOF
 	  exit (0);
 	}
 EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
+	eval $set_cc_for_build
+	$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
+	rm -f $dummy.c $dummy
 	echo unknown-hitachi-hiuxwe2
 	exit 0 ;;
     9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
@@ -697,6 +658,9 @@ EOF
     parisc*:Lites*:*:*)
 	echo hppa1.1-hp-lites
 	exit 0 ;;
+    hppa*:OpenBSD:*:*)
+	echo hppa-unknown-openbsd
+	exit 0 ;;
     C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
 	echo c1-convex-bsd
         exit 0 ;;
@@ -715,6 +679,9 @@ EOF
     C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
 	echo c4-convex-bsd
         exit 0 ;;
+    CRAY*X-MP:*:*:*)
+	echo xmp-cray-unicos
+        exit 0 ;;
     CRAY*Y-MP:*:*:*)
 	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
 	exit 0 ;;
@@ -727,21 +694,27 @@ EOF
     CRAY*TS:*:*:*)
 	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
 	exit 0 ;;
+    CRAY*T3D:*:*:*)
+	echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
     CRAY*T3E:*:*:*)
 	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
 	exit 0 ;;
     CRAY*SV1:*:*:*)
 	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
 	exit 0 ;;
-    *:UNICOS/mp:*:*)
-	echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+    CRAY-2:*:*:*)
+	echo cray2-cray-unicos
+        exit 0 ;;
     F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
 	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
         FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
         FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
         echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
         exit 0 ;;
+    hp300:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
     i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
 	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
 	exit 0 ;;
@@ -751,22 +724,11 @@ EOF
     *:BSD/OS:*:*)
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
 	exit 0 ;;
-    *:FreeBSD:*:*|*:GNU/FreeBSD:*:*)
-	# Determine whether the default compiler uses glibc.
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <features.h>
-	#if __GLIBC__ >= 2
-	LIBC=gnu
-	#else
-	LIBC=
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
-	# GNU/FreeBSD systems have a "k" prefix to indicate we are using
-	# FreeBSD's kernel, but not the complete OS.
-	case ${LIBC} in gnu) kernel_only='k' ;; esac
-	echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
+    *:FreeBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit 0 ;;
+    *:OpenBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
 	exit 0 ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
@@ -777,17 +739,11 @@ EOF
     i*:PW*:*)
 	echo ${UNAME_MACHINE}-pc-pw32
 	exit 0 ;;
-    x86:Interix*:[34]*)
-	echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
-	exit 0 ;;
-    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
-	echo i${UNAME_MACHINE}-pc-mks
-	exit 0 ;;
     i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
 	# UNAME_MACHINE based on the output of uname instead of i386?
-	echo i586-pc-interix
+	echo i386-pc-interix
 	exit 0 ;;
     i*:UWIN*:*)
 	echo ${UNAME_MACHINE}-pc-uwin
@@ -807,52 +763,17 @@ EOF
     arm*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit 0 ;;
-    cris:Linux:*:*)
-	echo cris-axis-linux-gnu
-	exit 0 ;;
     ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux
 	exit 0 ;;
     m68*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit 0 ;;
     mips:Linux:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#undef CPU
-	#undef mips
-	#undef mipsel
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mipsel
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips
-	#else
-	CPU=
-	#endif
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
-	;;
-    mips64:Linux:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#undef CPU
-	#undef mips64
-	#undef mips64el
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mips64el
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips64
-	#else
-	CPU=
-	#endif
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+	case `sed -n '/^byte/s/^.*: \(.*\) endian/\1/p' < /proc/cpuinfo` in
+	  big)    echo mips-unknown-linux-gnu && exit 0 ;;
+	  little) echo mipsel-unknown-linux-gnu && exit 0 ;;
+	esac
 	;;
     ppc:Linux:*:*)
 	echo powerpc-unknown-linux-gnu
@@ -868,7 +789,7 @@ EOF
 	  PCA57) UNAME_MACHINE=alphapca56 ;;
 	  EV6)   UNAME_MACHINE=alphaev6 ;;
 	  EV67)  UNAME_MACHINE=alphaev67 ;;
-	  EV68*) UNAME_MACHINE=alphaev68 ;;
+	  EV68*) UNAME_MACHINE=alphaev67 ;;
         esac
 	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
 	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
@@ -888,9 +809,6 @@ EOF
     s390:Linux:*:* | s390x:Linux:*:*)
 	echo ${UNAME_MACHINE}-ibm-linux
 	exit 0 ;;
-    sh64*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
     sh*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit 0 ;;
@@ -904,8 +822,7 @@ EOF
 	# The BFD linker knows what the default object file format is, so
 	# first see if it will tell us. cd to the root directory to prevent
 	# problems with other programs or directories called `ld' in the path.
-	# Set LC_ALL=C to ensure ld outputs messages in English.
-	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
+	ld_supported_targets=`cd /; ld --help 2>&1 \
 			 | sed -ne '/supported targets:/!d
 				    s/[ 	][ 	]*/ /g
 				    s/.*supported targets: *//
@@ -917,7 +834,7 @@ EOF
 		;;
 	  a.out-i386-linux)
 		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-		exit 0 ;;
+		exit 0 ;;		
 	  coff-i386)
 		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
 		exit 0 ;;
@@ -928,32 +845,33 @@ EOF
 		exit 0 ;;
 	esac
 	# Determine whether the default compiler is a.out or elf
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <features.h>
-	#ifdef __ELF__
-	# ifdef __GLIBC__
-	#  if __GLIBC__ >= 2
-	LIBC=gnu
-	#  else
-	LIBC=gnulibc1
-	#  endif
-	# else
-	LIBC=gnulibc1
-	# endif
-	#else
-	#ifdef __INTEL_COMPILER
-	LIBC=gnu
-	#else
-	LIBC=gnuaout
-	#endif
-	#endif
-	#ifdef __dietlibc__
-	LIBC=dietlibc
-	#endif
+	cat >$dummy.c <<EOF
+#include <features.h>
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+#ifdef __ELF__
+# ifdef __GLIBC__
+#  if __GLIBC__ >= 2
+    printf ("%s-pc-linux-gnu\n", argv[1]);
+#  else
+    printf ("%s-pc-linux-gnulibc1\n", argv[1]);
+#  endif
+# else
+   printf ("%s-pc-linux-gnulibc1\n", argv[1]);
+# endif
+#else
+  printf ("%s-pc-linux-gnuaout\n", argv[1]);
+#endif
+  return 0;
+}
 EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
-	test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
+	eval $set_cc_for_build
+	$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0
+	rm -f $dummy.c $dummy
 	test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
 	;;
     i*86:DYNIX/ptx:4*:*)
@@ -970,23 +888,6 @@ EOF
         # Use sysv4.2uw... so that sysv4* matches it.
 	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
 	exit 0 ;;
-    i*86:OS/2:*:*)
-	# If we were able to find `uname', then EMX Unix compatibility
-	# is probably installed.
-	echo ${UNAME_MACHINE}-pc-os2-emx
-	exit 0 ;;
-    i*86:XTS-300:*:STOP)
-	echo ${UNAME_MACHINE}-unknown-stop
-	exit 0 ;;
-    i*86:atheos:*:*)
-	echo ${UNAME_MACHINE}-unknown-atheos
-	exit 0 ;;
-    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
-	echo i386-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    i*86:*DOS:*:*)
-	echo ${UNAME_MACHINE}-pc-msdosdjgpp
-	exit 0 ;;
     i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
 	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
 	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
@@ -1008,19 +909,22 @@ EOF
 		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
 		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
 	elif /bin/uname -X 2>/dev/null >/dev/null ; then
-		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
-		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
-		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+		UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
 			&& UNAME_MACHINE=i586
-		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+		(/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
 			&& UNAME_MACHINE=i686
-		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+		(/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
 			&& UNAME_MACHINE=i686
 		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
 	else
 		echo ${UNAME_MACHINE}-pc-sysv32
 	fi
 	exit 0 ;;
+    i*86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit 0 ;;
     pc:*:*:*)
 	# Left here for compatibility:
         # uname -m prints for DJGPP always 'pc', but it prints nothing about
@@ -1044,15 +948,9 @@ EOF
 	# "miniframe"
 	echo m68010-convergent-sysv
 	exit 0 ;;
-    mc68k:UNIX:SYSTEM5:3.51m)
-	echo m68k-convergent-sysv
-	exit 0 ;;
-    M680?0:D-NIX:5.3:*)
-	echo m68k-diab-dnix
-	exit 0 ;;
     M68*:*:R3V[567]*:*)
 	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
-    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
+    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
 	OS_REL=''
 	test -r /etc/.relid \
 	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
@@ -1069,6 +967,9 @@ EOF
     mc68030:UNIX_System_V:4.*:*)
 	echo m68k-atari-sysv4
 	exit 0 ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
     TSUNAMI:LynxOS:2.*:*)
 	echo sparc-unknown-lynxos${UNAME_RELEASE}
 	exit 0 ;;
@@ -1095,8 +996,8 @@ EOF
 		echo ns32k-sni-sysv
 	fi
 	exit 0 ;;
-    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-                      # says <Richard.M.Bartel@ccMail.Census.GOV>
+    PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                           # says <Richard.M.Bartel@ccMail.Census.GOV>
         echo i586-unisys-sysv4
         exit 0 ;;
     *:UNIX_System_V:4*:FTX*)
@@ -1108,10 +1009,6 @@ EOF
 	# From seanf@swdc.stratus.com.
 	echo i860-stratus-sysv4
 	exit 0 ;;
-    *:VOS:*:*)
-	# From Paul.Green@stratus.com.
-	echo hppa1.1-stratus-vos
-	exit 0 ;;
     mc68*:A/UX:*:*)
 	echo m68k-apple-aux${UNAME_RELEASE}
 	exit 0 ;;
@@ -1140,9 +1037,6 @@ EOF
     SX-5:SUPER-UX:*:*)
 	echo sx5-nec-superux${UNAME_RELEASE}
 	exit 0 ;;
-    SX-6:SUPER-UX:*:*)
-	echo sx6-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
     Power*:Rhapsody:*:*)
 	echo powerpc-apple-rhapsody${UNAME_RELEASE}
 	exit 0 ;;
@@ -1150,24 +1044,18 @@ EOF
 	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
 	exit 0 ;;
     *:Darwin:*:*)
-	case `uname -p` in
-	    *86) UNAME_PROCESSOR=i686 ;;
-	    powerpc) UNAME_PROCESSOR=powerpc ;;
-	esac
-	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+	echo `uname -p`-apple-darwin${UNAME_RELEASE}
 	exit 0 ;;
     *:procnto*:*:* | *:QNX:[0123456789]*:*)
-	UNAME_PROCESSOR=`uname -p`
-	if test "$UNAME_PROCESSOR" = "x86"; then
-		UNAME_PROCESSOR=i386
+	if test "${UNAME_MACHINE}" = "x86pc"; then
 		UNAME_MACHINE=pc
 	fi
-	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+	echo `uname -p`-${UNAME_MACHINE}-nto-qnx
 	exit 0 ;;
     *:QNX:*:4*)
 	echo i386-pc-qnx
 	exit 0 ;;
-    NSR-[DGKLNPTVWY]:NONSTOP_KERNEL:*:*)
+    NSR-[KW]:NONSTOP_KERNEL:*:*)
 	echo nsr-tandem-nsk${UNAME_RELEASE}
 	exit 0 ;;
     *:NonStop-UX:*:*)
@@ -1190,6 +1078,11 @@ EOF
 	fi
 	echo ${UNAME_MACHINE}-unknown-plan9
 	exit 0 ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit 0 ;;
     *:TOPS-10:*:*)
 	echo pdp10-unknown-tops10
 	exit 0 ;;
@@ -1208,15 +1101,11 @@ EOF
     *:ITS:*:*)
 	echo pdp10-unknown-its
 	exit 0 ;;
-    SEI:*:*:SEIUX)
-        echo mips-sei-seiux${UNAME_RELEASE}
-	exit 0 ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
 
-eval $set_cc_for_build
 cat >$dummy.c <<EOF
 #ifdef _SEQUENT_
 # include <sys/types.h>
@@ -1331,7 +1220,9 @@ main ()
 }
 EOF
 
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
+eval $set_cc_for_build
+$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0
+rm -f $dummy.c $dummy
 
 # Apollos put the system type in the environment.
 

config.sub

@@ -1,9 +1,9 @@
 #! /bin/sh
 # Configuration validation subroutine script.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+#   Free Software Foundation, Inc.
 
-timestamp='2003-08-18'
+timestamp='2001-06-08'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -29,8 +29,7 @@ timestamp='2003-08-18'
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted ChangeLog entry.
+# Please send patches to <config-patches@gnu.org>.
 #
 # Configuration subroutine to validate and canonicalize a configuration type.
 # Supply the specified configuration type as an argument.
@@ -118,7 +117,7 @@ esac
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-dietlibc | kfreebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+  nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
@@ -224,50 +223,26 @@ esac
 case $basic_machine in
 	# Recognize the basic CPU types without company name.
 	# Some are omitted here because they have special meanings below.
-	1750a | 580 \
-	| a29k \
-	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
-	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
-	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
-	| c4x | clipper \
-	| d10v | d30v | dlx | dsp16xx \
-	| fr30 | frv \
-	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
-	| i370 | i860 | i960 | ia64 \
-	| ip2k | iq2000 \
-	| m32r | m68000 | m68k | m88k | mcore \
-	| mips | mipsbe | mipseb | mipsel | mipsle \
-	| mips16 \
-	| mips64 | mips64el \
-	| mips64vr | mips64vrel \
-	| mips64orion | mips64orionel \
-	| mips64vr4100 | mips64vr4100el \
-	| mips64vr4300 | mips64vr4300el \
-	| mips64vr5000 | mips64vr5000el \
-	| mipsisa32 | mipsisa32el \
-	| mipsisa32r2 | mipsisa32r2el \
-	| mipsisa64 | mipsisa64el \
-	| mipsisa64r2 | mipsisa64r2el \
-	| mipsisa64sb1 | mipsisa64sb1el \
-	| mipsisa64sr71k | mipsisa64sr71kel \
-	| mipstx39 | mipstx39el \
-	| mn10200 | mn10300 \
-	| msp430 \
-	| ns16k | ns32k \
-	| openrisc | or32 \
-	| pdp10 | pdp11 | pj | pjl \
-	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
-	| pyramid \
-	| sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
-	| sh64 | sh64le \
-	| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
-	| strongarm \
-	| tahoe | thumb | tic4x | tic80 | tron \
-	| v850 | v850e \
-	| we32k \
-	| x86 | xscale | xstormy16 | xtensa \
-	| z8k)
+	tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc \
+	        | arm | arme[lb] | arm[bl]e | armv[2345] | armv[345][lb] | strongarm | xscale \
+		| pyramid | mn10200 | mn10300 | tron | a29k \
+		| 580 | i960 | h8300 \
+		| x86 | ppcbe | mipsbe | mipsle | shbe | shle \
+		| hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
+		| hppa64 \
+		| alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \
+		| alphaev6[78] \
+		| we32k | ns16k | clipper | i370 | sh | sh[34] \
+		| powerpc | powerpcle \
+		| 1750a | dsp16xx | pdp10 | pdp11 \
+		| mips16 | mips64 | mipsel | mips64el \
+		| mips64orion | mips64orionel | mipstx39 | mipstx39el \
+		| mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
+		| mips64vr5000 | mips64vr5000el | mcore | s390 | s390x \
+		| sparc | sparclet | sparclite | sparc64 | sparcv9 | sparcv9b \
+		| v850 | c4x \
+		| thumb | d10v | d30v | fr30 | avr | openrisc | tic80 \
+		| pj | pjl | h8500 | z8k)
 		basic_machine=$basic_machine-unknown
 		;;
 	m6811 | m68hc11 | m6812 | m68hc12)
@@ -290,61 +265,31 @@ case $basic_machine in
 		exit 1
 		;;
 	# Recognize the basic CPU types with company name.
-	580-* \
-	| a29k-* \
-	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
-	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
-	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* \
-	| bs2000-* \
-	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
-	| clipper-* | cydra-* \
-	| d10v-* | d30v-* | dlx-* \
-	| elxsi-* \
-	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
-	| h8300-* | h8500-* \
-	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
-	| i*86-* | i860-* | i960-* | ia64-* \
-	| ip2k-* | iq2000-* \
-	| m32r-* \
-	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | mcore-* \
-	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
-	| mips16-* \
-	| mips64-* | mips64el-* \
-	| mips64vr-* | mips64vrel-* \
-	| mips64orion-* | mips64orionel-* \
-	| mips64vr4100-* | mips64vr4100el-* \
-	| mips64vr4300-* | mips64vr4300el-* \
-	| mips64vr5000-* | mips64vr5000el-* \
-	| mipsisa32-* | mipsisa32el-* \
-	| mipsisa32r2-* | mipsisa32r2el-* \
-	| mipsisa64-* | mipsisa64el-* \
-	| mipsisa64r2-* | mipsisa64r2el-* \
-	| mipsisa64sb1-* | mipsisa64sb1el-* \
-	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
-	| mipstx39-* | mipstx39el-* \
-	| msp430-* \
-	| none-* | np1-* | nv1-* | ns16k-* | ns32k-* \
-	| orion-* \
-	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
-	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
-	| pyramid-* \
-	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
-	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
-	| sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
-	| tahoe-* | thumb-* \
-	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
-	| tron-* \
-	| v850-* | v850e-* | vax-* \
-	| we32k-* \
-	| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
-	| xtensa-* \
-	| ymp-* \
-	| z8k-*)
+	# FIXME: clean up the formatting here.
+	vax-* | tahoe-* | i*86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
+	      | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | c[123]* \
+	      | arm-*  | armbe-* | armle-* | armv*-* | strongarm-* | xscale-* \
+	      | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
+	      | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
+	      | xmp-* | ymp-* \
+	      | x86-* | ppcbe-* | mipsbe-* | mipsle-* | shbe-* | shle-* \
+	      | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \
+	      | hppa2.0n-* | hppa64-* \
+	      | alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \
+	      | alphaev6[78]-* \
+	      | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
+	      | clipper-* | orion-* \
+	      | sparclite-* | pdp10-* | pdp11-* | sh-* | sh[34]-* | sh[34]eb-* \
+	      | powerpc-* | powerpcle-* | sparc64-* | sparcv9-* | sparcv9b-* | sparc86x-* \
+	      | mips16-* | mips64-* | mipsel-* \
+	      | mips64el-* | mips64orion-* | mips64orionel-* \
+	      | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
+	      | mipstx39-* | mipstx39el-* | mcore-* \
+	      | f30[01]-* | f700-* | s390-* | s390x-* | sv1-* | t3e-* \
+	      | [cjt]90-* \
+	      | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
+	      | thumb-* | v850-* | d30v-* | tic30-* | tic80-* | c30-* | fr30-* \
+	      | bs2000-* | tic54x-* | c54x-* | x86_64-* | pj-* | pjl-*)
 		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
@@ -376,9 +321,6 @@ case $basic_machine in
 		basic_machine=a29k-none
 		os=-bsd
 		;;
-	amd64)
-		basic_machine=x86_64-pc
-		;;
 	amdahl)
 		basic_machine=580-amdahl
 		os=-sysv
@@ -410,10 +352,6 @@ case $basic_machine in
 		basic_machine=ns32k-sequent
 		os=-dynix
 		;;
-	c90)
-		basic_machine=c90-cray
-		os=-unicos
-		;;
 	convex-c1)
 		basic_machine=c1-convex
 		os=-bsd
@@ -434,8 +372,16 @@ case $basic_machine in
 		basic_machine=c38-convex
 		os=-bsd
 		;;
-	cray | j90)
-		basic_machine=j90-cray
+	cray | ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	cray2)
+		basic_machine=cray2-cray
+		os=-unicos
+		;;
+	[cjt]90)
+		basic_machine=${basic_machine}-cray
 		os=-unicos
 		;;
 	crds | unos)
@@ -450,14 +396,6 @@ case $basic_machine in
 	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
 		basic_machine=mips-dec
 		;;
-	decsystem10* | dec10*)
-		basic_machine=pdp10-dec
-		os=-tops10
-		;;
-	decsystem20* | dec20*)
-		basic_machine=pdp10-dec
-		os=-tops20
-		;;
 	delta | 3300 | motorola-3300 | motorola-delta \
 	      | 3300-motorola | delta-motorola)
 		basic_machine=m68k-motorola
@@ -638,6 +576,14 @@ case $basic_machine in
 		basic_machine=m68k-atari
 		os=-mint
 		;;
+	mipsel*-linux*)
+		basic_machine=mipsel-unknown
+		os=-linux-gnu
+		;;
+	mips*-linux*)
+		basic_machine=mips-unknown
+		os=-linux-gnu
+		;;
 	mips3*-*)
 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
 		;;
@@ -652,10 +598,6 @@ case $basic_machine in
 		basic_machine=m68k-rom68k
 		os=-coff
 		;;
-	morphos)
-		basic_machine=powerpc-unknown
-		os=-morphos
-		;;
 	msdos)
 		basic_machine=i386-pc
 		os=-msdos
@@ -728,10 +670,6 @@ case $basic_machine in
 	np1)
 		basic_machine=np1-gould
 		;;
-	nv1)
-		basic_machine=nv1-cray
-		os=-unicosmp
-		;;
 	nsr-tandem)
 		basic_machine=nsr-tandem
 		;;
@@ -739,10 +677,6 @@ case $basic_machine in
 		basic_machine=hppa1.1-oki
 		os=-proelf
 		;;
-	or32 | or32-*)
-		basic_machine=or32-unknown
-		os=-coff
-		;;
 	OSE68000 | ose68000)
 		basic_machine=m68000-ericsson
 		os=-ose
@@ -765,58 +699,42 @@ case $basic_machine in
 	pbb)
 		basic_machine=m68k-tti
 		;;
-	pc532 | pc532-*)
+        pc532 | pc532-*)
 		basic_machine=ns32k-pc532
 		;;
-	pentium | p5 | k5 | k6 | nexgen | viac3)
+	pentium | p5 | k5 | k6 | nexgen)
 		basic_machine=i586-pc
 		;;
-	pentiumpro | p6 | 6x86 | athlon | athlon_*)
+	pentiumpro | p6 | 6x86 | athlon)
 		basic_machine=i686-pc
 		;;
-	pentiumii | pentium2 | pentiumiii | pentium3)
+	pentiumii | pentium2)
 		basic_machine=i686-pc
 		;;
-	pentium4)
-		basic_machine=i786-pc
-		;;
-	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+	pentium-* | p5-* | k5-* | k6-* | nexgen-*)
 		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
 	pentiumpro-* | p6-* | 6x86-* | athlon-*)
 		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
-	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+	pentiumii-* | pentium2-*)
 		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
-	pentium4-*)
-		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
 	pn)
 		basic_machine=pn-gould
 		;;
 	power)	basic_machine=power-ibm
 		;;
 	ppc)	basic_machine=powerpc-unknown
-		;;
+	        ;;
 	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
 	ppcle | powerpclittle | ppc-le | powerpc-little)
 		basic_machine=powerpcle-unknown
-		;;
+	        ;;
 	ppcle-* | powerpclittle-*)
 		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
-	ppc64)	basic_machine=powerpc64-unknown
-		;;
-	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
-		basic_machine=powerpc64le-unknown
-		;;
-	ppc64le-* | powerpc64little-*)
-		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
 	ps2)
 		basic_machine=i386-ibm
 		;;
@@ -834,26 +752,10 @@ case $basic_machine in
 	rtpc | rtpc-*)
 		basic_machine=romp-ibm
 		;;
-	s390 | s390-*)
-		basic_machine=s390-ibm
-		;;
-	s390x | s390x-*)
-		basic_machine=s390x-ibm
-		;;
 	sa29200)
 		basic_machine=a29k-amd
 		os=-udi
 		;;
-	sb1)
-		basic_machine=mipsisa64sb1-unknown
-		;;
-	sb1el)
-		basic_machine=mipsisa64sb1el-unknown
-		;;
-	sei)
-		basic_machine=mips-sei
-		os=-seiux
-		;;
 	sequent)
 		basic_machine=i386-sequent
 		;;
@@ -861,10 +763,7 @@ case $basic_machine in
 		basic_machine=sh-hitachi
 		os=-hms
 		;;
-	sh64)
-		basic_machine=sh64-unknown
-		;;
-	sparclite-wrs | simso-wrs)
+	sparclite-wrs)
 		basic_machine=sparclite-wrs
 		os=-vxworks
 		;;
@@ -931,35 +830,19 @@ case $basic_machine in
 		os=-dynix
 		;;
 	t3e)
-		basic_machine=alphaev5-cray
-		os=-unicos
-		;;
-	t90)
-		basic_machine=t90-cray
+		basic_machine=t3e-cray
 		os=-unicos
 		;;
 	tic54x | c54x*)
 		basic_machine=tic54x-unknown
 		os=-coff
 		;;
-	tic55x | c55x*)
-		basic_machine=tic55x-unknown
-		os=-coff
-		;;
-	tic6x | c6x*)
-		basic_machine=tic6x-unknown
-		os=-coff
-		;;
 	tx39)
 		basic_machine=mipstx39-unknown
 		;;
 	tx39el)
 		basic_machine=mipstx39el-unknown
 		;;
-	toad1)
-		basic_machine=pdp10-xkl
-		os=-tops20
-		;;
 	tower | tower-32)
 		basic_machine=m68k-ncr
 		;;
@@ -984,8 +867,8 @@ case $basic_machine in
 		os=-vms
 		;;
 	vpp*|vx|vx-*)
-		basic_machine=f301-fujitsu
-		;;
+               basic_machine=f301-fujitsu
+               ;;
 	vxworks960)
 		basic_machine=i960-wrs
 		os=-vxworks
@@ -1006,13 +889,17 @@ case $basic_machine in
 		basic_machine=hppa1.1-winbond
 		os=-proelf
 		;;
-	xps | xps100)
-		basic_machine=xps100-honeywell
+	windows32)
+		basic_machine=i386-pc
+		os=-windows32-msvcrt
 		;;
-	ymp)
-		basic_machine=ymp-cray
+	xmp)
+		basic_machine=xmp-cray
 		os=-unicos
 		;;
+        xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
 	z8k-*-coff)
 		basic_machine=z8k-unknown
 		os=-sim
@@ -1033,6 +920,13 @@ case $basic_machine in
 	op60c)
 		basic_machine=hppa1.1-oki
 		;;
+	mips)
+		if [ x$os = x-linux-gnu ]; then
+			basic_machine=mips-unknown
+		else
+			basic_machine=mips-mips
+		fi
+		;;
 	romp)
 		basic_machine=romp-ibm
 		;;
@@ -1052,16 +946,13 @@ case $basic_machine in
 	we32k)
 		basic_machine=we32k-att
 		;;
-	sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
+	sh3 | sh4)
 		basic_machine=sh-unknown
 		;;
-	sh64)
-		basic_machine=sh64-unknown
-		;;
 	sparc | sparcv9 | sparcv9b)
 		basic_machine=sparc-sun
 		;;
-	cydra)
+        cydra)
 		basic_machine=cydra-cydrome
 		;;
 	orion)
@@ -1076,6 +967,10 @@ case $basic_machine in
 	pmac | pmac-mpw)
 		basic_machine=powerpc-apple
 		;;
+	c4x*)
+		basic_machine=c4x-none
+		os=-coff
+		;;
 	*-unknown)
 		# Make sure to match an already-canonicalized machine name.
 		;;
@@ -1131,19 +1026,16 @@ case $os in
 	      | -aos* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -kfreebsd* | -freebsd* | -riscix* \
+	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
 	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -chorusos* | -chorusrdb* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
 	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
-	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+	      | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
-	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
-	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
-	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
-	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei*)
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* | -os2*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1155,10 +1047,8 @@ case $os in
 			;;
 		esac
 		;;
-	-nto-qnx*)
-		;;
 	-nto*)
-		os=`echo $os | sed -e 's|nto|nto-qnx|'`
+		os=-nto-qnx
 		;;
 	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
 	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
@@ -1167,9 +1057,6 @@ case $os in
 	-mac*)
 		os=`echo $os | sed -e 's|mac|macos|'`
 		;;
-	-linux-dietlibc)
-		os=-linux-dietlibc
-		;;
 	-linux*)
 		os=`echo $os | sed -e 's|linux|linux-gnu|'`
 		;;
@@ -1200,20 +1087,14 @@ case $os in
 	-acis*)
 		os=-aos
 		;;
-	-atheos*)
-		os=-atheos
-		;;
 	-386bsd)
 		os=-bsd
 		;;
 	-ctix* | -uts*)
 		os=-sysv
 		;;
-	-nova*)
-		os=-rtmk-nova
-		;;
 	-ns2 )
-		os=-nextstep2
+	        os=-nextstep2
 		;;
 	-nsk*)
 		os=-nsk
@@ -1252,14 +1133,8 @@ case $os in
 	-xenix)
 		os=-xenix
 		;;
-	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-		os=-mint
-		;;
-	-aros*)
-		os=-aros
-		;;
-	-kaos*)
-		os=-kaos
+        -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+	        os=-mint
 		;;
 	-none)
 		;;
@@ -1292,14 +1167,10 @@ case $basic_machine in
 	arm*-semi)
 		os=-aout
 		;;
-    c4x-* | tic4x-*)
-        os=-coff
-        ;;
-	# This must come before the *-dec entry.
 	pdp10-*)
 		os=-tops20
 		;;
-	pdp11-*)
+        pdp11-*)
 		os=-none
 		;;
 	*-dec | vax-*)
@@ -1326,9 +1197,6 @@ case $basic_machine in
 	mips*-*)
 		os=-elf
 		;;
-	or32-*)
-		os=-coff
-		;;
 	*-tti)	# must be before sparc entry or we get the wrong os.
 		os=-sysv3
 		;;
@@ -1392,19 +1260,19 @@ case $basic_machine in
 	*-next)
 		os=-nextstep3
 		;;
-	*-gould)
+        *-gould)
 		os=-sysv
 		;;
-	*-highlevel)
+        *-highlevel)
 		os=-bsd
 		;;
 	*-encore)
 		os=-bsd
 		;;
-	*-sgi)
+        *-sgi)
 		os=-irix
 		;;
-	*-siemens)
+        *-siemens)
 		os=-sysv4
 		;;
 	*-masscomp)
@@ -1476,7 +1344,7 @@ case $basic_machine in
 			-ptx*)
 				vendor=sequent
 				;;
-			-vxsim* | -vxworks* | -windiss*)
+			-vxsim* | -vxworks*)
 				vendor=wrs
 				;;
 			-aux*)
@@ -1491,9 +1359,6 @@ case $basic_machine in
 			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
 				vendor=atari
 				;;
-			-vos*)
-				vendor=stratus
-				;;
 		esac
 		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
 		;;

configure.in

@@ -3,9 +3,9 @@ dnl Process this file with autoconf to produce a configure script.
 AC_INIT()
 AC_CONFIG_SRCDIR([byteorder.h])
 AC_CONFIG_HEADER(config.h)
-AC_PREREQ(2.59)
+AC_PREREQ(2.52)
 
-RSYNC_VERSION=2.6.5
+RSYNC_VERSION=2.5.2pre3
 AC_SUBST(RSYNC_VERSION)
 AC_MSG_NOTICE([Configuring rsync $RSYNC_VERSION])
 
@@ -18,7 +18,6 @@ AC_CANONICAL_TARGET([])
 dnl Checks for programs.
 AC_PROG_CC
 AC_PROG_CPP
-AC_PROG_EGREP
 AC_PROG_INSTALL
 AC_PROG_CC_STDC
 AC_SUBST(SHELL)
@@ -26,7 +25,7 @@ AC_SUBST(SHELL)
 AC_DEFINE([_GNU_SOURCE], 1,
           [Define _GNU_SOURCE so that we get all necessary prototypes])
 
-if test "x$ac_cv_prog_cc_stdc" = xno
+if test "$xac_cv_prog_cc_stdc" = xno
 then
 	AC_MSG_WARN([rsync requires an ANSI C compiler and you don't seem to have one])
 fi
@@ -57,7 +56,7 @@ fi
 
 
 AC_ARG_ENABLE(profile,
-	AC_HELP_STRING([--enable-profile],
+	AC_HELP_STRING([--enable-profile],	
 		[turn on CPU profiling (default no)],
 		[], []))
 if test x"$enable_profile" = xyes
@@ -66,23 +65,12 @@ then
 fi
 
 
-# Specifically, this turns on panic_action handling.
-AC_ARG_ENABLE(maintainer-mode,
-	AC_HELP_STRING([--enable-maintainer-mode],
-		[turn on extra debug features],
-		[], []))
-if test x"$enable_maintainer_mode" = xyes
-then
-	CFLAGS="$CFLAGS -DMAINTAINER_MODE"
-fi
-
-
 # This is needed for our included version of popt.  Kind of silly, but
 # I don't want our version too far out of sync.
 CFLAGS="$CFLAGS -DHAVE_CONFIG_H"
 
 # If GCC, turn on warnings.
-if test x"$GCC" = x"yes"
+if test "x$GCC" = "xyes"
 then
 	CFLAGS="$CFLAGS -Wall -W"
 fi
@@ -91,49 +79,14 @@ AC_ARG_WITH(included-popt,
         [  --with-included-popt    use bundled popt library, not from system])
 
 AC_ARG_WITH(rsync-path,
-	[  --with-rsync-path=PATH  set default --rsync-path to PATH (default: rsync)],
+	[  --with-rsync-path=PATH  set default --rsync-path to PATH (default: \"rsync\")],
 	[ RSYNC_PATH="$with_rsync_path" ],
 	[ RSYNC_PATH="rsync" ])
-
-AC_DEFINE_UNQUOTED(RSYNC_PATH, "$RSYNC_PATH", [location of rsync on remote machine])
-
-AC_ARG_WITH(rsyncd-conf,
-	AC_HELP_STRING([--with-rsyncd-conf=PATH], [set configuration file for rsync server to PATH (default: /etc/rsyncd.conf)]),
-	[ if test ! -z "$with_rsyncd_conf" ; then
-		case $with_rsyncd_conf in
-			yes|no)
-				RSYNCD_SYSCONF="/etc/rsyncd.conf"
-				;;
-			/*)
-				RSYNCD_SYSCONF="$with_rsyncd_conf"
-				;;
-			*)
-                                AC_MSG_ERROR(You must specify an absolute path to --with-rsyncd-conf=PATH)
-				;;
-		esac
-	else
-		RSYNCD_SYSCONF="/etc/rsyncd.conf"
-	fi ],
-	[ RSYNCD_SYSCONF="/etc/rsyncd.conf" ])
-
-AC_DEFINE_UNQUOTED(RSYNCD_SYSCONF, "$RSYNCD_SYSCONF", [location of configuration file for rsync server])
-
-AC_ARG_WITH(rsh,
-	AC_HELP_STRING([--with-rsh=CMD], [set remote shell command to CMD (default: ssh)]))
+AC_DEFINE_UNQUOTED(RSYNC_PATH, "$RSYNC_PATH", [ ])
 
 AC_CHECK_PROG(HAVE_REMSH, remsh, 1, 0)
-if test x$HAVE_REMSH = x1; then
-	AC_DEFINE(HAVE_REMSH, 1, [Define to 1 if remote shell is remsh, not rsh])
-fi
+AC_DEFINE_UNQUOTED(HAVE_REMSH, $HAVE_REMSH, [ ])
 
-if test x"$with_rsh" != x
-then
-	RSYNC_RSH="$with_rsh"
-else
-	RSYNC_RSH="ssh"
-fi
-
-AC_DEFINE_UNQUOTED(RSYNC_RSH, "$RSYNC_RSH", [default -e command])
 
 # arrgh. libc in the current debian stable screws up the largefile
 # stuff, getting byte range locking wrong
@@ -145,29 +98,24 @@ AC_TRY_RUN([
 #include <sys/types.h>
 #include <sys/wait.h>
 
-int main(void)
+int main(void) 
 {
 	struct flock lock;
-	int status;
-	char tpl[32] = "/tmp/locktest.XXXXXX";
-	int fd = mkstemp(tpl);
-	if (fd < 0) {
-		strcpy(tpl, "conftest.dat");
-		fd = open(tpl, O_CREAT|O_RDWR, 0600);
-	}
-
+        int status;
+	int fd = open("conftest.dat", O_CREAT|O_RDWR, 0600);
 	lock.l_type = F_WRLCK;
 	lock.l_whence = SEEK_SET;
 	lock.l_start = 0;
 	lock.l_len = 1;
 	lock.l_pid = 0;
+	
 	fcntl(fd,F_SETLK,&lock);
 	if (fork() == 0) {
-		lock.l_start = 1;
-		_exit(fcntl(fd,F_SETLK,&lock) == 0);
-	}
-	wait(&status);
-	unlink(tpl);
+		lock.l_start = 1;		
+		exit(fcntl(fd,F_SETLK,&lock) == 0);
+        }
+        wait(&status);
+	unlink("conftest.dat");
 	exit(WEXITSTATUS(status));
 }
 ],
@@ -180,20 +128,9 @@ ipv6type=unknown
 ipv6lib=none
 ipv6trylibc=yes
 
-AC_ARG_ENABLE(ipv6,
+AC_ARG_ENABLE(ipv6, 
 	AC_HELP_STRING([--disable-ipv6], [don't even try to use IPv6]))
 
-dnl Do you want to disable use of locale functions
-AH_TEMPLATE([CONFIG_LOCALE],
-[Undefine if you don't want locale features.  By default this is defined.])
-AC_ARG_ENABLE([locale],
-	AC_HELP_STRING([--disable-locale], [turn off locale features]),
-[if test x$enableval = xyes; then
-  AC_DEFINE(CONFIG_LOCALE)
-fi],
-AC_DEFINE(CONFIG_LOCALE)
-)
-
 if test "x$enable_ipv6" != xno
 then
 	AC_MSG_CHECKING([ipv6 stack type])
@@ -217,7 +154,7 @@ yes
 #ifdef __KAME__
 yes
 #endif],
-				[ipv6type=$i;
+				[ipv6type=$i; 
 				AC_DEFINE(INET6, 1, [true if you have IPv6])])
 			;;
 		linux-glibc)
@@ -284,35 +221,22 @@ yes
 	AC_SEARCH_LIBS(getaddrinfo, inet6)
 fi
 
-AC_MSG_CHECKING([whether to call shutdown on all sockets])
-case $host_os in
-	*cygwin* ) AC_MSG_RESULT(yes)
-                   AC_DEFINE(SHUTDOWN_ALL_SOCKETS, 1,
-			    [Define to 1 if sockets need to be shutdown])
-		   ;;
-	       * ) AC_MSG_RESULT(no);;
-esac
-
 AC_C_BIGENDIAN
 AC_HEADER_DIRENT
 AC_HEADER_TIME
 AC_HEADER_SYS_WAIT
-AC_CHECK_HEADERS(sys/fcntl.h sys/select.h fcntl.h sys/time.h sys/unistd.h \
-    unistd.h utime.h grp.h compat.h sys/param.h ctype.h sys/wait.h \
-    sys/ioctl.h sys/filio.h string.h stdlib.h sys/socket.h sys/mode.h \
-    sys/un.h glob.h mcheck.h arpa/inet.h arpa/nameser.h locale.h \
-    netdb.h malloc.h float.h)
-AC_HEADER_MAJOR
+AC_CHECK_HEADERS(sys/fcntl.h sys/select.h fcntl.h sys/time.h sys/unistd.h unistd.h utime.h grp.h)
+AC_CHECK_HEADERS(compat.h sys/param.h ctype.h sys/wait.h sys/ioctl.h)
+AC_CHECK_HEADERS(sys/filio.h string.h stdlib.h sys/socket.h sys/mode.h)
+AC_CHECK_HEADERS(glob.h alloca.h mcheck.h sys/sysctl.h arpa/inet.h arpa/nameser.h)
+AC_CHECK_HEADERS(netdb.h)
+AC_CHECK_HEADERS(malloc.h)
 
 AC_CHECK_SIZEOF(int)
 AC_CHECK_SIZEOF(long)
-AC_CHECK_SIZEOF(long long)
 AC_CHECK_SIZEOF(short)
-AC_CHECK_SIZEOF(off_t)
-AC_CHECK_SIZEOF(off64_t)
 
 AC_C_INLINE
-AC_C_LONG_DOUBLE
 
 AC_TYPE_SIGNAL
 AC_TYPE_UID_T
@@ -323,13 +247,14 @@ AC_TYPE_PID_T
 AC_TYPE_GETGROUPS
 AC_CHECK_MEMBERS([struct stat.st_rdev])
 
+AC_CHECK_TYPE([ino_t], [unsigned])
 TYPE_SOCKLEN_T
 
 AC_CACHE_CHECK([for errno in errno.h],rsync_cv_errno, [
     AC_TRY_COMPILE([#include <errno.h>],[int i = errno],
 	rsync_cv_errno=yes,rsync_cv_have_errno_decl=no)])
 if test x"$rsync_cv_errno" = x"yes"; then
-   AC_DEFINE(HAVE_ERRNO_DECL, 1, [Define to 1 if errno is declared in errno.h])
+   AC_DEFINE(HAVE_ERRNO_DECL, 1, [ ])
 fi
 
 # The following test taken from the cvs sources
@@ -360,11 +285,11 @@ if test x"$ac_cv_func_connect" = x"no"; then
     esac
     dnl We can't just call AC_CHECK_FUNCS(connect) here, because the value
     dnl has been cached.
-    if test x"$ac_cv_lib_socket_connect" = x"yes" ||
+    if test x"$ac_cv_lib_socket_connect" = x"yes" || 
        test x"$ac_cv_lib_inet_connect" = x"yes"; then
         # ac_cv_func_connect=yes
         # don't!  it would cause AC_CHECK_FUNC to succeed next time configure is run
-        AC_DEFINE(HAVE_CONNECT, 1, [Define to 1 if you have the "connect" function])
+        AC_DEFINE(HAVE_CONNECT, 1, [ ])
     fi
 fi
 
@@ -372,107 +297,29 @@ AC_CHECK_LIB(resolv, inet_ntop)
 
 dnl AC_MSG_NOTICE([Looking in libraries: $LIBS])
 
-AC_CHECK_FUNCS(inet_ntop, , [AC_LIBOBJ(lib/inet_ntop)])
-AC_CHECK_FUNCS(inet_pton, , [AC_LIBOBJ(lib/inet_pton)])
+AC_CHECK_FUNCS(inet_ntop, , AC_LIBOBJ(lib/inet_ntop)) 
+AC_CHECK_FUNCS(inet_pton, , AC_LIBOBJ(lib/inet_pton))
 
-# Irix 6.5 has getaddrinfo but not the corresponding defines, so use
-#   builtin getaddrinfo if one of the defines don't exist
-AC_CACHE_CHECK([whether defines needed by getaddrinfo exist],
-               rsync_cv_HAVE_GETADDR_DEFINES,[
-			AC_EGREP_CPP(yes, [
-			#include <sys/types.h>
-			#include <sys/socket.h>
-			#include <netdb.h>
-			#ifdef AI_PASSIVE
-			yes
-			#endif],
-			rsync_cv_HAVE_GETADDR_DEFINES=yes,
-			rsync_cv_HAVE_GETADDR_DEFINES=no)])
-if test x"$rsync_cv_HAVE_GETADDR_DEFINES" = x"yes"; then
-	# Tru64 UNIX has getaddrinfo() but has it renamed in libc as
-	# something else so we must include <netdb.h> to get the
-	# redefinition.
-	AC_CHECK_FUNCS(getaddrinfo, ,
-		[AC_MSG_CHECKING([for getaddrinfo by including <netdb.h>])
-		AC_TRY_LINK([#include <sys/types.h>
-		#include <sys/socket.h>
-		#include <netdb.h>],[getaddrinfo(NULL, NULL, NULL, NULL);],
-			[AC_MSG_RESULT([yes])
-			AC_DEFINE(HAVE_GETADDRINFO, 1,
-				[Define to 1 if you have the "getaddrinfo" function.])],
-			[AC_MSG_RESULT([no])
-			AC_LIBOBJ(lib/getaddrinfo)])])
-	AC_CHECK_FUNCS(getnameinfo, , [AC_LIBOBJ(lib/getnameinfo)])
-else
-	AC_LIBOBJ(lib/getaddrinfo)
-	AC_LIBOBJ(lib/getnameinfo)
-fi
+AC_CHECK_FUNCS(getaddrinfo, , AC_LIBOBJ(lib/getaddrinfo)) 
+AC_CHECK_FUNCS(getnameinfo, , AC_LIBOBJ(lib/getnameinfo))
 
-AC_CHECK_MEMBER([struct sockaddr.sa_len],
-		[ AC_DEFINE(HAVE_SOCKADDR_LEN, 1, [Do we have sockaddr.sa_len?]) ],
+AC_CHECK_MEMBER([struct sockaddr.sa_len], 
+		[ AC_DEFINE(HAVE_SOCKADDR_LEN) ],
 		[],
 		[
 #include <sys/types.h>
 #include <sys/socket.h>
 ])
 
-AC_CHECK_MEMBER([struct sockaddr_in.sin_len],
-		[ AC_DEFINE(HAVE_SOCKADDR_IN_LEN, 1, [Do we have sockaddr_in.sin_len?]) ],
-		[],
-		[
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-])
-
-AC_CHECK_MEMBER([struct sockaddr_un.sun_len],
-		[ AC_DEFINE(HAVE_SOCKADDR_UN_LEN, 1, [Do we have sockaddr_un.sun_len?]) ],
-		[],
-		[
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-])
-
 AC_MSG_CHECKING(struct sockaddr_storage)
 AC_TRY_COMPILE([#include <sys/types.h>
 #include <sys/socket.h>],
 [struct sockaddr_storage x;],
 	AC_MSG_RESULT(yes)
-	AC_DEFINE(HAVE_SOCKADDR_STORAGE, 1,
-		[Define to 1 if you have struct sockaddr_storage.] ),
+	AC_DEFINE(HAVE_SOCKADDR_STORAGE, 1, 
+		[Define if you have strct sockaddr_storage.] ),
 	AC_MSG_RESULT(no))
 
-AC_CHECK_MEMBER([struct sockaddr_in6.sin6_scope_id],
-		[ AC_DEFINE(HAVE_SOCKADDR_IN6_SCOPE_ID, 1, [Do we have sockaddr_in6.sin6_scope_id?]) ],
-		[],
-		[
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-])
-
-AC_MSG_CHECKING(struct stat64)
-AC_TRY_COMPILE([#include <stdio.h>
-#if HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#if HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#if STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# if HAVE_STDLIB_H
-#  include <stdlib.h>
-# endif
-#endif
-],[struct stat64 st;],
-    AC_MSG_RESULT(yes)
-	AC_DEFINE(HAVE_STRUCT_STAT64,1,[Define to 1 if you have struct stat64.]),
-    AC_MSG_RESULT(no))
-
 # if we can't find strcasecmp, look in -lresolv (for Unixware at least)
 #
 AC_CHECK_FUNCS(strcasecmp)
@@ -482,41 +329,14 @@ fi
 
 dnl At the moment we don't test for a broken memcmp(), because all we
 dnl need to do is test for equality, not comparison, and it seems that
-dnl every platform has a memcmp that can do at least that.
+dnl every platform has a memcmp that can do at least that.  
 dnl AC_FUNC_MEMCMP
 
 AC_FUNC_UTIME_NULL
-AC_FUNC_ALLOCA
-AC_CHECK_FUNCS(waitpid wait4 getcwd strdup strerror chown chmod mknod mkfifo \
-    fchmod fstat strchr readlink link utime utimes strftime mtrace ftruncate \
-    memmove lchown vsnprintf snprintf vasprintf asprintf setsid glob strpbrk \
-    strlcat strlcpy strtol mallinfo getgroups setgroups geteuid getegid \
-    setlocale setmode open64 lseek64 mkstemp64 va_copy __va_copy)
-
-AC_CHECK_FUNCS(getpgrp tcgetpgrp)
-if test $ac_cv_func_getpgrp = yes; then
-    AC_FUNC_GETPGRP
-fi
-
-# Determine whether chown follows symlinks (it should).
-AC_CACHE_CHECK([whether chown() dereferences symlinks],rsync_cv_chown_follows_symlink,[
-  AC_TRY_RUN([
-#if HAVE_UNISTD_H
-# include <unistd.h>
-#endif
-#include <stdlib.h>
-#include <errno.h>
-    main() {
-	char const *dangling_symlink = "conftest.dangle";
-	unlink(dangling_symlink);
-	if (symlink("conftest.no-such", dangling_symlink) < 0) abort();
-	if (chown(dangling_symlink, getuid(), getgid()) < 0 && errno == ENOENT) exit(0);
-	exit(1);
-    }],
-  rsync_cv_chown_follows_symlink=yes,rsync_cv_chown_follows_symlink=no,rsync_cv_chown_follows_symlink=yes)])
-if test $rsync_cv_chown_follows_symlink = no; then
-  AC_DEFINE(CHOWN_MODIFIES_SYMLINK, 1, [Define to 1 if chown modifies symlinks.])
-fi
+AC_CHECK_FUNCS(waitpid wait4 getcwd strdup strerror chown chmod mknod)
+AC_CHECK_FUNCS(fchmod fstat strchr readlink link utime utimes strftime)
+AC_CHECK_FUNCS(memmove lchown vsnprintf snprintf asprintf setsid glob strpbrk)
+AC_CHECK_FUNCS(strlcat strlcpy mtrace mallinfo)
 
 AC_CACHE_CHECK([for working socketpair],rsync_cv_HAVE_SOCKETPAIR,[
 AC_TRY_RUN([
@@ -529,7 +349,16 @@ main() {
 }],
 rsync_cv_HAVE_SOCKETPAIR=yes,rsync_cv_HAVE_SOCKETPAIR=no,rsync_cv_HAVE_SOCKETPAIR=cross)])
 if test x"$rsync_cv_HAVE_SOCKETPAIR" = x"yes"; then
-    AC_DEFINE(HAVE_SOCKETPAIR, 1, [Define to 1 if you have the "socketpair" function])
+    AC_DEFINE(HAVE_SOCKETPAIR, 1, [ ])
+fi
+
+AC_CACHE_CHECK([for working fnmatch],rsync_cv_HAVE_FNMATCH,[
+AC_TRY_RUN([#include <fnmatch.h>
+main() { exit((fnmatch("*.o", "x.o", FNM_PATHNAME) == 0 &&
+               fnmatch("a/b/*", "a/b/c/d", FNM_PATHNAME) != 0) ? 0: 1); }],
+rsync_cv_HAVE_FNMATCH=yes,rsync_cv_HAVE_FNMATCH=no,rsync_cv_HAVE_FNMATCH=cross)])
+if test x"$rsync_cv_HAVE_FNMATCH" = x"yes"; then
+    AC_DEFINE(HAVE_FNMATCH, 1, [ ])
 fi
 
 if test x"$with_included_popt" != x"yes"
@@ -543,21 +372,43 @@ then
     AC_MSG_RESULT($srcdir/popt)
     BUILD_POPT='$(popt_OBJS)'
     CFLAGS="$CFLAGS -I$srcdir/popt"
-    if test x"$ALLOCA" != x
-    then
-	# this can be removed when/if we add an included alloca.c;
-	#  see autoconf documentation on AC_FUNC_ALLOCA
-	AC_MSG_WARN([included libpopt will use malloc, not alloca (which wastes a small amount of memory)])
-    fi
 else
     AC_MSG_RESULT(no)
 fi
 
-AC_CACHE_CHECK([for unsigned char],rsync_cv_SIGNED_CHAR_OK,[
-AC_TRY_COMPILE([],[signed char *s = ""],
-rsync_cv_SIGNED_CHAR_OK=yes,rsync_cv_SIGNED_CHAR_OK=no)])
-if test x"$rsync_cv_SIGNED_CHAR_OK" = x"yes"; then
-    AC_DEFINE(SIGNED_CHAR_OK, 1, [Define to 1 if "signed char" is a valid type])
+AC_CACHE_CHECK([for long long],rsync_cv_HAVE_LONGLONG,[
+AC_TRY_RUN([#include <stdio.h>
+main() { long long x = 1000000; x *= x; exit(((x/1000000) == 1000000)? 0: 1); }],
+rsync_cv_HAVE_LONGLONG=yes,rsync_cv_HAVE_LONGLONG=no,rsync_cv_HAVE_LONGLONG=cross)])
+if test x"$rsync_cv_HAVE_LONGLONG" = x"yes"; then
+    AC_DEFINE(HAVE_LONGLONG, 1, [ ])
+fi
+
+AC_CACHE_CHECK([for off64_t],rsync_cv_HAVE_OFF64_T,[
+AC_TRY_RUN([#include <stdio.h>
+#include <sys/stat.h>
+main() { struct stat64 st; off64_t s; if (sizeof(off_t) == sizeof(off64_t)) exit(1); exit((lstat64("/dev/null", &st)==0)?0:1); }],
+rsync_cv_HAVE_OFF64_T=yes,rsync_cv_HAVE_OFF64_T=no,rsync_cv_HAVE_OFF64_T=cross)])
+if test x"$rsync_cv_HAVE_OFF64_T" = x"yes"; then
+    AC_DEFINE(HAVE_OFF64_T, 1, [ ])
+fi
+
+AC_CACHE_CHECK([for short ino_t],rsync_cv_HAVE_SHORT_INO_T,[
+AC_TRY_RUN([#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+main() { if (sizeof(ino_t) < sizeof(unsigned int)) return 0; return 1; }],
+rsync_cv_HAVE_SHORT_INO_T=yes,rsync_cv_HAVE_SHORT_INO_T=no,rsync_cv_HAVE_SHORT_INO_T=cross)])
+if test x"$rsync_cv_HAVE_SHORT_INO_T" = x"yes"; then
+    AC_DEFINE(HAVE_SHORT_INO_T, 1, [ ])
+fi
+
+AC_CACHE_CHECK([for unsigned char],rsync_cv_HAVE_UNSIGNED_CHAR,[
+AC_TRY_RUN([#include <stdio.h>
+main() { char c; c=250; exit((c > 0)?0:1); }],
+rsync_cv_HAVE_UNSIGNED_CHAR=yes,rsync_cv_HAVE_UNSIGNED_CHAR=no,rsync_cv_HAVE_UNSIGNED_CHAR=cross)])
+if test x"$rsync_cv_HAVE_UNSIGNED_CHAR" = x"yes"; then
+    AC_DEFINE(HAVE_UNSIGNED_CHAR, 1, [ ])
 fi
 
 AC_CACHE_CHECK([for broken readdir],rsync_cv_HAVE_BROKEN_READDIR,[
@@ -568,32 +419,33 @@ if (di && di->d_name[-2] == '.' && di->d_name[-1] == 0 &&
 di->d_name[0] == 0) exit(0); exit(1);} ],
 rsync_cv_HAVE_BROKEN_READDIR=yes,rsync_cv_HAVE_BROKEN_READDIR=no,rsync_cv_HAVE_BROKEN_READDIR=cross)])
 if test x"$rsync_cv_HAVE_BROKEN_READDIR" = x"yes"; then
-    AC_DEFINE(HAVE_BROKEN_READDIR, 1, [Define to 1 if readdir() is broken])
+    AC_DEFINE(HAVE_BROKEN_READDIR, 1, [ ])
 fi
 
 AC_CACHE_CHECK([for utimbuf],rsync_cv_HAVE_UTIMBUF,[
 AC_TRY_COMPILE([#include <sys/types.h>
 #include <utime.h>],
 [struct utimbuf tbuf;  tbuf.actime = 0; tbuf.modtime = 1; exit(utime("foo.c",&tbuf));],
-rsync_cv_HAVE_UTIMBUF=yes,rsync_cv_HAVE_UTIMBUF=no)])
+rsync_cv_HAVE_UTIMBUF=yes,rsync_cv_HAVE_UTIMBUF=no,rsync_cv_HAVE_UTIMBUF=cross)])
 if test x"$rsync_cv_HAVE_UTIMBUF" = x"yes"; then
-    AC_DEFINE(HAVE_UTIMBUF, 1, [Define to 1 if you have the "struct utimbuf" type])
+    AC_DEFINE(HAVE_UTIMBUF, 1, [ ])
 fi
 
 AC_CACHE_CHECK([if gettimeofday takes tz argument],rsync_cv_HAVE_GETTIMEOFDAY_TZ,[
-AC_TRY_COMPILE([#include <sys/time.h>
-#include <unistd.h>],
-[struct timeval tv; exit(gettimeofday(&tv, NULL));],
-rsync_cv_HAVE_GETTIMEOFDAY_TZ=yes,rsync_cv_HAVE_GETTIMEOFDAY_TZ=no)])
-if test x"$rsync_cv_HAVE_GETTIMEOFDAY_TZ" != x"no"; then
-    AC_DEFINE(HAVE_GETTIMEOFDAY_TZ, 1, [Define to 1 if gettimeofday() takes a time-zone arg])
+AC_TRY_RUN([
+#include <sys/time.h>
+#include <unistd.h>
+main() { struct timeval tv; exit(gettimeofday(&tv, NULL));}],
+           rsync_cv_HAVE_GETTIMEOFDAY_TZ=yes,rsync_cv_HAVE_GETTIMEOFDAY_TZ=no,rsync_cv_HAVE_GETTIMEOFDAY_TZ=cross)])
+if test x"$rsync_cv_HAVE_GETTIMEOFDAY_TZ" = x"yes"; then
+    AC_DEFINE(HAVE_GETTIMEOFDAY_TZ, 1, [ ])
 fi
 
 AC_CACHE_CHECK([for C99 vsnprintf],rsync_cv_HAVE_C99_VSNPRINTF,[
 AC_TRY_RUN([
 #include <sys/types.h>
 #include <stdarg.h>
-void foo(const char *format, ...) {
+void foo(const char *format, ...) { 
        va_list ap;
        int len;
        char buf[5];
@@ -611,7 +463,7 @@ main() { foo("hello"); }
 ],
 rsync_cv_HAVE_C99_VSNPRINTF=yes,rsync_cv_HAVE_C99_VSNPRINTF=no,rsync_cv_HAVE_C99_VSNPRINTF=cross)])
 if test x"$rsync_cv_HAVE_C99_VSNPRINTF" = x"yes"; then
-    AC_DEFINE(HAVE_C99_VSNPRINTF, 1, [Define to 1 if vsprintf has a C99-compatible return value])
+    AC_DEFINE(HAVE_C99_VSNPRINTF, 1, [ ])
 fi
 
 
@@ -620,10 +472,10 @@ AC_TRY_RUN([#include <stdlib.h>
 #include <sys/types.h>
 #include <sys/stat.h>
 #include <unistd.h>
-main() {
+main() { 
   struct stat st;
-  char tpl[20]="/tmp/test.XXXXXX";
-  int fd = mkstemp(tpl);
+  char tpl[20]="/tmp/test.XXXXXX"; 
+  int fd = mkstemp(tpl); 
   if (fd == -1) exit(1);
   unlink(tpl);
   if (fstat(fd, &st) != 0) exit(1);
@@ -634,17 +486,7 @@ rsync_cv_HAVE_SECURE_MKSTEMP=yes,
 rsync_cv_HAVE_SECURE_MKSTEMP=no,
 rsync_cv_HAVE_SECURE_MKSTEMP=cross)])
 if test x"$rsync_cv_HAVE_SECURE_MKSTEMP" = x"yes"; then
-    case $target_os in
-    hpux*)
-	dnl HP-UX has a broken mkstemp() implementation they refuse to fix,
-	dnl so we noisily skip using it.  See HP change request JAGaf34426
-	dnl for details. (sbonds)
-	AC_MSG_WARN(Skipping broken HP-UX mkstemp() -- using mktemp() instead)
-	;;
-    *)
-	AC_DEFINE(HAVE_SECURE_MKSTEMP, 1, [Define to 1 if mkstemp() is available and works right])
-	;;
-    esac
+    AC_DEFINE(HAVE_SECURE_MKSTEMP, 1, [ ])
 fi
 
 
@@ -656,11 +498,11 @@ AC_TRY_RUN([
 #include <arpa/inet.h>
 main() { struct in_addr ip; ip.s_addr = 0x12345678;
 if (strcmp(inet_ntoa(ip),"18.52.86.120") &&
-    strcmp(inet_ntoa(ip),"120.86.52.18")) { exit(1); }
+    strcmp(inet_ntoa(ip),"120.86.52.18")) { exit(1); } 
 exit(0);}],
            rsync_cv_REPLACE_INET_NTOA=no,rsync_cv_REPLACE_INET_NTOA=yes,rsync_cv_REPLACE_INET_NTOA=cross)])
 if test x"$rsync_cv_REPLACE_INET_NTOA" = x"yes"; then
-    AC_DEFINE(REPLACE_INET_NTOA, 1, [Define to 1 if inet_ntoa() needs to be replaced])
+    AC_DEFINE(REPLACE_INET_NTOA, 1, [ ])
 fi
 
 
@@ -670,39 +512,11 @@ AC_TRY_RUN([
 #include <sys/types.h>
 #include <netinet/in.h>
 #include <arpa/inet.h>
-main() { struct in_addr ip;
+main() { struct in_addr ip; 
 if (inet_aton("example", &ip) == 0) exit(0); exit(1);}],
            rsync_cv_REPLACE_INET_ATON=no,rsync_cv_REPLACE_INET_ATON=yes,rsync_cv_REPLACE_INET_ATON=cross)])
 if test x"$rsync_cv_REPLACE_INET_ATON" = x"yes"; then
-    AC_DEFINE(REPLACE_INET_ATON, 1, [Define to 1 if inet_aton() needs to be replaced])
-fi
-
-AC_CACHE_CHECK([if mknod creates FIFOs],rsync_cv_MKNOD_CREATES_FIFOS,[
-AC_TRY_RUN([
-#include <stdio.h>
-#include <sys/stat.h>
-#include <errno.h>
-main() { int rc, ec; char *fn = "fifo-test";
-unlink(fn); rc = mknod(fn,S_IFIFO,0600); ec = errno; unlink(fn);
-if (rc) {printf("%d %d\n",rc,ec); return ec;}
-return 0;}],
-           rsync_cv_MKNOD_CREATES_FIFOS=yes,rsync_cv_MKNOD_CREATES_FIFOS=no,rsync_cv_MKNOD_CREATES_FIFOS=cross)])
-if test x"$rsync_cv_MKNOD_CREATES_FIFOS" = x"yes"; then
-    AC_DEFINE(MKNOD_CREATES_FIFOS, 1, [Define to 1 if mknod() can create FIFOs.])
-fi
-
-AC_CACHE_CHECK([if mknod creates sockets],rsync_cv_MKNOD_CREATES_SOCKETS,[
-AC_TRY_RUN([
-#include <stdio.h>
-#include <sys/stat.h>
-#include <errno.h>
-main() { int rc, ec; char *fn = "sock-test";
-unlink(fn); rc = mknod(fn,S_IFSOCK,0600); ec = errno; unlink(fn);
-if (rc) {printf("%d %d\n",rc,ec); return ec;}
-return 0;}],
-           rsync_cv_MKNOD_CREATES_SOCKETS=yes,rsync_cv_MKNOD_CREATES_SOCKETS=no,rsync_cv_MKNOD_CREATES_SOCKETS=cross)])
-if test x"$rsync_cv_MKNOD_CREATES_SOCKETS" = x"yes"; then
-    AC_DEFINE(MKNOD_CREATES_SOCKETS, 1, [Define to 1 if mknod() can create sockets.])
+    AC_DEFINE(REPLACE_INET_ATON, 1, [ ])
 fi
 
 #

doc/.cvsignore

@@ -1,2 +0,0 @@
-rsync.pdf
-rsync.ps

doc/README-SGML

@@ -1,20 +0,0 @@
-Handling the rsync SGML documentation
-
-rsync documentation is now primarily in Docbook format.  Docbook is an
-SGML/XML documentation format that is becoming standard on free
-operating systems.  It's also used for Samba documentation.
-
-The SGML files are source code that can be translated into various
-useful output formats, primarily PDF, HTML, Postscript and plain text.  
-
-To do this transformation on Debian, you should install the
-docbook-utils package.  Having done that, you can say 
-
-  docbook2pdf rsync.sgml
-
-and so on.
-
-On other systems you probably need James Clark's "sp" and "JadeTeX"
-packages.  Work it out for yourself and send a note to the mailing
-list.
-

doc/profile.txt

@@ -1,42 +0,0 @@
-Notes on rsync profiling
-
-strlcpy is hot:
-
-                0.00    0.00       1/7735635     push_dir [68]
-                0.00    0.00       1/7735635     pop_dir [71]
-                0.00    0.00       1/7735635     send_file_list [15]
-                0.01    0.00   18857/7735635     send_files [4]
-                0.04    0.00  129260/7735635     send_file_entry [18]
-                0.04    0.00  129260/7735635     make_file [20]
-                0.04    0.00  141666/7735635     send_directory <cycle 1> [36]
-                2.29    0.00 7316589/7735635     f_name [13]
-[14]    11.7    2.42    0.00 7735635         strlcpy [14]
-
-
-Here's the top few functions:
-
- 46.23      9.57     9.57 13160929     0.00     0.00  mdfour64
- 14.78     12.63     3.06 13160929     0.00     0.00  copy64
- 11.69     15.05     2.42  7735635     0.00     0.00  strlcpy
- 10.05     17.13     2.08    41438     0.05     0.38  sum_update
-  4.11     17.98     0.85 13159996     0.00     0.00  mdfour_update
-  1.50     18.29     0.31                             file_compare
-  1.45     18.59     0.30   129261     0.00     0.01  send_file_entry
-  1.23     18.84     0.26  2557585     0.00     0.00  f_name
-  1.11     19.07     0.23  1483750     0.00     0.00  u_strcmp
-  1.11     19.30     0.23   118129     0.00     0.00  writefd_unbuffered
-  0.92     19.50     0.19  1085011     0.00     0.00  writefd
-  0.43     19.59     0.09   156987     0.00     0.00  read_timeout
-  0.43     19.68     0.09   129261     0.00     0.00  clean_fname
-  0.39     19.75     0.08    32887     0.00     0.38  matched
-  0.34     19.82     0.07        1    70.00 16293.92  send_files
-  0.29     19.89     0.06   129260     0.00     0.00  make_file
-  0.29     19.95     0.06    75430     0.00     0.00  read_unbuffered
-
-
-
-mdfour could perhaps be made faster:
-
-/* NOTE: This code makes no attempt to be fast!  */
-
-There might be an optimized version somewhere that we can borrow.

doc/rsync.sgml

@@ -1,351 +0,0 @@
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
-<book id="rsync">
-  <bookinfo>
-    <title>rsync</title>
-    <copyright>
-      <year>1996 -- 2002</year>
-      <holder>Martin Pool</holder>
-      <holder>Andrew Tridgell</holder>
-    </copyright>
-    <author>
-      <firstname>Martin</firstname>
-      <surname>Pool</surname>
-    </author>
-  </bookinfo>
-
-  <chapter>
-    <title>Introduction</title>
-
-    <para>rsync is a flexible program for efficiently copying files or
-      directory trees.
-
-    <para>rsync has many options to select which files will be copied
-      and how they are to be transferred.  It may be used as an
-      alternative to ftp, http, scp or rcp.
-
-    <para>The rsync remote-update protocol allows rsync to transfer just
-      the differences between two sets of files across the network link,
-      using an efficient checksum-search algorithm described in the
-      technical report that accompanies this package.</para>
-
-    <para>Some of the additional features of rsync are:</para>
-
-    <itemizedlist>
-      
-      <listitem>
-	<para>support for copying links, devices, owners, groups and
-	  permissions
-	</para>
-      </listitem>
-      
-      <listitem>
-	<para>
-	  exclude and exclude-from options similar to GNU tar
-	</para>
-      </listitem>
-
-      <listitem>
-	<para>
-	  a CVS exclude mode for ignoring the same files that CVS would ignore
-      </listitem>
-
-      <listitem>
-	<para>
-	  can use any transparent remote shell, including rsh or ssh
-      </listitem>
-
-      <listitem>
-	<para>
-	  does not require root privileges
-      </listitem>
-
-      <listitem>
-	<para>
-	  pipelining of file transfers to minimize latency costs
-      </listitem>
-		
-      <listitem>
-	<para>
-	  support for anonymous or authenticated rsync servers (ideal for
-	  mirroring)
-	</para>
-      </listitem>
-    </itemizedlist>
-  </chapter>
-
-
-
-  <chapter>
-    <title>Using rsync</title>
-    <section>
-      <title>
-	Introductory example
-      </title>
-      
-      <para>
-	Probably the most common case of rsync usage is to copy files
-	to or from a remote machine using
-	<application>ssh</application> as a network transport.  In
-	this situation rsync is a good alternative to
-	<application>scp</application>.
-      </para>
-
-      <para>
-	The most commonly used arguments for rsync are
-      </para>
-
-      <variablelist>
-	<varlistentry>
-	  <term><option>-v</option></term>
-	  <listitem>
-	    <para>Be verbose.  Primarily, display the name of each file as it is copied.</para>
-	  </listitem>
-	</varlistentry>
-
-
-	<varlistentry>
-	  <term><option>-a</option></term>
-	  <listitem>
-	    <para>
-	      Reproduce the structure and attributes of the origin files as exactly
-	      as possible: this includes copying subdirectories, symlinks, special
-	      files, ownership and permissions.  (@xref{Attributes to
-	      copy}.)
-	    </para>
-	  </listitem>
-	</varlistentry>
-      </variablelist>
-
-
-	
-      <para><option>-v </option>
-      
-      <para><option>-z</option>
-	Compress network traffic, using a modified version of the
-	@command{zlib} library.</para>
-      
-      <para><option>-P</option>
-	Display a progress indicator while files are transferred.  This should
-	normally be ommitted if rsync is not run on a terminal.
-      </para>
-    </section>
-
-
-
-
-    <section>
-      <title>Local and remote</title>
-      
-      <para>There are six different ways of using rsync. They
-      are:</para>
-
-      
-
-      <!-- one of (CALLOUTLIST GLOSSLIST ITEMIZEDLIST ORDEREDLIST SEGMENTEDLIST SIMPLELIST VARIABLELIST CAUTION IMPORTANT NOTE TIP WARNING LITERALLAYOUT PROGRAMLISTING PROGRAMLISTINGCO SCREEN SCREENCO SCREENSHOT SYNOPSIS CMDSYNOPSIS FUNCSYNOPSIS CLASSSYNOPSIS FIELDSYNOPSIS CONSTRUCTORSYNOPSIS DESTRUCTORSYNOPSIS METHODSYNOPSIS FORMALPARA PARA SIMPARA ADDRESS BLOCKQUOTE GRAPHIC GRAPHICCO MEDIAOBJECT MEDIAOBJECTCO INFORMALEQUATION INFORMALEXAMPLE INFORMALFIGURE INFORMALTABLE EQUATION EXAMPLE FIGURE TABLE MSGSET PROCEDURE SIDEBAR QANDASET ANCHOR BRIDGEHEAD REMARK HIGHLIGHTS ABSTRACT AUTHORBLURB EPIGRAPH INDEXTERM REFENTRY SECTION) -->
-      <orderedlist>
-	<listitem>
-	  <para>
-	    for copying local files. This is invoked when neither
-	    source nor destination path contains a @code{:} separator
-
-	<listitem>
-	  <para>
-	    for copying from the local machine to a remote machine using
-	    a remote shell program as the transport (such as rsh or
-	    ssh). This is invoked when the destination path contains a
-	    single @code{:} separator.
-
-	<listitem>
-	  <para>
-	    for copying from a remote machine to the local machine
-	    using a remote shell program. This is invoked when the source
-	    contains a @code{:} separator.
-
-	<listitem>
-	  <para>
-	    for copying from a remote rsync server to the local
-	    machine. This is invoked when the source path contains a @code{::}
-	    separator or a @code{rsync://} URL.
-
-	<listitem>
-	  <para>
-	    for copying from the local machine to a remote rsync
-	    server. This is invoked when the destination path contains a @code{::}
-	    separator.
-
-	<listitem>
-	  <para>
-	    for listing files on a remote machine. This is done the
-	    same way as rsync transfers except that you leave off the
-	    local destination.  
-
-	</listitem>
-      </orderedlist>
-	  <para>
-Note that in all cases (other than listing) at least one of the source
-and destination paths must be local.
-
-	  <para>
-Any one invocation of rsync makes a copy in a single direction.  rsync
-currently has no equivalent of @command{ftp}'s interactive mode.
-
-@cindex @sc{nfs}
-@cindex network filesystems
-@cindex remote filesystems
-
-	  <para>
-rsync's network protocol is generally faster at copying files than
-network filesystems such as @sc{nfs} or @sc{cifs}.  It is better to
-run rsync on the file server either as a daemon or over ssh than
-running rsync giving the network directory.
-      </para>
-    </section>
-  </chapter>
-
-
-
-  <chapter>
-    <title>Frequently asked questions</title>
-
-    
-    <!-- one of (CALLOUTLIST GLOSSLIST ITEMIZEDLIST ORDEREDLIST SEGMENTEDLIST SIMPLELIST VARIABLELIST CAUTION IMPORTANT NOTE TIP WARNING LITERALLAYOUT PROGRAMLISTING PROGRAMLISTINGCO SCREEN SCREENCO SCREENSHOT SYNOPSIS CMDSYNOPSIS FUNCSYNOPSIS CLASSSYNOPSIS FIELDSYNOPSIS CONSTRUCTORSYNOPSIS DESTRUCTORSYNOPSIS METHODSYNOPSIS FORMALPARA PARA SIMPARA ADDRESS BLOCKQUOTE GRAPHIC GRAPHICCO MEDIAOBJECT MEDIAOBJECTCO INFORMALEQUATION INFORMALEXAMPLE INFORMALFIGURE INFORMALTABLE EQUATION EXAMPLE FIGURE TABLE MSGSET PROCEDURE SIDEBAR QANDASET ANCHOR BRIDGEHEAD REMARK HIGHLIGHTS ABSTRACT AUTHORBLURB EPIGRAPH INDEXTERM SECTION SIMPLESECT REFENTRY SECT1) -->
-    <qandaset>
-      <!-- one of (QANDADIV QANDAENTRY) -->
-
-      <qandaentry>
-	<question>
-	  <!-- one of (CALLOUTLIST GLOSSLIST ITEMIZEDLIST ORDEREDLIST
-	  SEGMENTEDLIST SIMPLELIST VARIABLELIST CAUTION IMPORTANT NOTE
-	  TIP WARNING LITERALLAYOUT PROGRAMLISTING PROGRAMLISTINGCO
-	  SCREEN SCREENCO SCREENSHOT SYNOPSIS CMDSYNOPSIS FUNCSYNOPSIS
-	  CLASSSYNOPSIS FIELDSYNOPSIS CONSTRUCTORSYNOPSIS
-	  DESTRUCTORSYNOPSIS METHODSYNOPSIS FORMALPARA PARA SIMPARA
-	  ADDRESS BLOCKQUOTE GRAPHIC GRAPHICCO MEDIAOBJECT
-	  MEDIAOBJECTCO INFORMALEQUATION INFORMALEXAMPLE
-	  INFORMALFIGURE INFORMALTABLE EQUATION EXAMPLE FIGURE TABLE
-	  PROCEDURE ANCHOR BRIDGEHEAD REMARK HIGHLIGHTS INDEXTERM) -->
-	  <para>Are there mailing lists for rsync?
-	</question>
-
-	<answer>
-	  <para>Yes, and you can subscribe and unsubscribe through a
-	  web interface at
-	    <ulink
-	      url="http://lists.samba.org/">http://lists.samba.org/</ulink>
-	  </para>
-
-	  <para>
-	    If you are having trouble with the mailing list, please
-	    send mail to the administrator
-	    
-	    <email>rsync-admin@lists.samba.org</email>
-
-	    not to the list itself.
-	  </para>
-
-	  <para>
-	    The mailing list archives are searchable.  Use 
-	    <ulink url="http://google.com/">Google</ulink> and prepend
-	    the search with <userinput>site:lists.samba.org
-	    rsync</userinput>, plus relevant keywords.
-	  </para>
-	</answer>
-      </qandaentry>
-
-
-      <qandaentry>
-	<question>
-	  <para>
-	    Why is rsync so much bigger when I build it with
-	    <command>gcc</command>?
-	  </para>
-	</question>
-	<answer>
-	  <para>
-	    On gcc, rsync builds by default with debug symbols
-	    included.  If you strip both executables, they should end
-	    up about the same size.  (Use <command>make
-	    install-strip</command>.)
-	  </para>
-	</answer>
-      </qandaentry>
-
-      
-      <qandaentry>
-	<question>
-	  <para>Is rsync useful for a single large file like an ISO image?</para>
-	</question>
-	<answer>
-	  <para>
-	    Yes, but note the following:
-
-	  <para>
-   Background: A common use of rsync is to update a file (or set of files) in one location from a more
-   correct or up-to-date copy in another location, taking advantage of portions of the files that are
-   identical to speed up the process. (Note that rsync will transfer a file in its entirety if no copy
-   exists at the destination.)
-
-	  <para>
-   (This discussion is written in terms of updating a local copy of a file from a correct file in a
-   remote location, although rsync can work in either direction.)
-
-	  <para>
-   The file to be updated (the local file) must be in a destination directory that has enough space for
-   two copies of the file. (In addition, keep an extra copy of the file to be updated in a different
-   location for safety -- see the discussion (below) about rsync's behavior when the rsync process is
-   interrupted before completion.)
-
-	  <para>
-   The local file must have the same name as the remote file being sync'd to (I think?). If you are
-   trying to upgrade an iso from, for example, beta1 to beta2, rename the local file to the same name
-   as the beta2 file. *(This is a useful thing to do -- only the changed portions will be
-   transmitted.)*
-
-	  <para>
-   The extra copy of the local file kept in a different location is because of rsync's behavior if
-   interrupted before completion:
-
-	  <para>
-   * If you specify the --partial option and rsync is interrupted, rsync will save the partially
-   rsync'd file and throw away the original local copy. (The partially rsync'd file is correct but
-   truncated.) If rsync is restarted, it will not have a local copy of the file to check for duplicate
-   blocks beyond the section of the file that has already been rsync'd, thus the remainder of the rsync
-   process will be a "pure transfer" of the file rather than taking advantage of the rsync algorithm.
-
-	  <para>
-   * If you don't specify the --partial option and rsync is interrupted, rsync will throw away the
-   partially rsync'd file, and, when rsync is restarted starts the rsync process over from the
-   beginning.
-
-	  <para>
-   Which of these is most desirable depends on the degree of commonality between the local and remote
-   copies of the file *and how much progress was made before the interruption*.
-
-	  <para>
-   The ideal approach after an interruption would be to create a new file by taking the original file
-   and deleting a portion equal in size to the portion already rsync'd and then appending *the
-   remaining* portion to the portion of the file that has already been rsync'd. (There has been some
-   discussion about creating an option to do this automatically.)
-
-   The --compare-dest option is useful when transferring multiple files, but is of no benefit in
-   transferring a single file. (AFAIK)
-
-   *Other potentially useful information can be found at:
-   -[3]http://twiki.org/cgi-bin/view/Wikilearn/RsyncingALargeFile
-
-   This answer, formatted with "real" bullets, can be found at:
-   -[4]http://twiki.org/cgi-bin/view/Wikilearn/RsyncingALargeFileFAQ*
-
-	  </para>
-	</answer>
-      </qandaentry>
-    </qandaset>
-  </chapter>
-
-
-  <appendix>
-    <title>Other Resources</title>
-    
-    <para><ulink url="http://www.ccp14.ac.uk/ccp14admin/rsync/"></ulink></para>
-  </appendix>
-</book>

errcode.h

@@ -19,15 +19,13 @@
 
 /*
  * error codes returned by rsync.  If you change these, please also update the
- * string mappings in log.c and the EXIT VALUES in rsync.yo
+ * string mappings in log.c
  */
 
-#define RERR_OK         0
 #define RERR_SYNTAX     1       /* syntax or usage error */
 #define RERR_PROTOCOL   2       /* protocol incompatibility */
 #define RERR_FILESELECT 3       /* errors selecting input/output files, dirs */
-#define RERR_UNSUPPORTED 4      /* requested action not supported */
-#define RERR_STARTCLIENT 5      /* error starting client-server protocol */
+#define RERR_UNSUPPORTED 4       /* requested action not supported */
 
 #define RERR_SOCKETIO   10      /* error in socket IO */
 #define RERR_FILEIO     11      /* error in file IO */
@@ -39,8 +37,6 @@
 #define RERR_WAITCHILD  21      /* some error returned by waitpid() */
 #define RERR_MALLOC     22      /* error allocating core memory buffers */
 #define RERR_PARTIAL    23      /* partial transfer */
-#define RERR_VANISHED   24      /* file(s) vanished on sender side */
-#define RERR_DEL_LIMIT  25      /* skipped some deletes due to --max-delete */
 
 #define RERR_TIMEOUT    30      /* timeout in data send/receive */
 

fileio.c

@@ -1,31 +1,29 @@
-/*
+/* 
    Copyright (C) Andrew Tridgell 1998
-   Copyright (C) 2002 by Martin Pool
-
+   
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
-
+   
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
+   
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
 /*
-  File IO utilities used in rsync
+  File IO utilities used in rsync 
   */
 #include "rsync.h"
 
-extern int sparse_files;
-
 static char last_byte;
 static int last_sparse;
+extern int sparse_files;
 
 int sparse_end(int f)
 {
@@ -40,11 +38,11 @@ int sparse_end(int f)
 
 static int write_sparse(int f,char *buf,size_t len)
 {
-	size_t l1=0, l2=0;
+	int l1=0,l2=0;
 	int ret;
 
-	for (l1 = 0; l1 < len && buf[l1] == 0; l1++) {}
-	for (l2 = 0; l2 < len-l1 && buf[len-(l2+1)] == 0; l2++) {}
+	for (l1=0;l1<len && buf[l1]==0;l1++) ;
+	for (l2=0;l2<(len-l1) && buf[len-(l2+1)]==0;l2++) ;
 
 	last_byte = buf[len-1];
 
@@ -52,83 +50,38 @@ static int write_sparse(int f,char *buf,size_t len)
 		last_sparse=1;
 
 	if (l1 > 0) {
-		do_lseek(f,l1,SEEK_CUR);
+		do_lseek(f,l1,SEEK_CUR);  
 	}
 
-	if (l1 == len)
+	if (l1 == len) 
 		return len;
 
-	ret = write(f, buf + l1, len - (l1+l2));
-	if (ret == -1 || ret == 0)
-		return ret;
-	else if (ret != (int) (len - (l1+l2)))
+	if ((ret=write(f,buf+l1,len-(l1+l2))) != len-(l1+l2)) {
+		if (ret == -1 || ret == 0) return ret;
 		return (l1+ret);
+	}
 
 	if (l2 > 0)
 		do_lseek(f,l2,SEEK_CUR);
-
+	
 	return len;
 }
 
 
-static char *wf_writeBuf;
-static size_t wf_writeBufSize;
-static size_t wf_writeBufCnt;
 
-int flush_write_file(int f)
-{
-	int ret = 0;
-	char *bp = wf_writeBuf;
-
-	while (wf_writeBufCnt > 0) {
-		if ((ret = write(f, bp, wf_writeBufCnt)) < 0) {
-			if (errno == EINTR)
-				continue;
-			return ret;
-		}
-		wf_writeBufCnt -= ret;
-		bp += ret;
-	}
-	return ret;
-}
-
-
-/*
- * write_file does not allow incomplete writes.  It loops internally
- * until len bytes are written or errno is set.
- */
 int write_file(int f,char *buf,size_t len)
 {
 	int ret = 0;
 
-	while (len > 0) {
-		int r1;
-		if (sparse_files) {
-			int len1 = MIN(len, SPARSE_WRITE_SIZE);
-			r1 = write_sparse(f, buf, len1);
-		} else {
-			if (!wf_writeBuf) {
-				wf_writeBufSize = WRITE_SIZE * 8;
-				wf_writeBufCnt  = 0;
-				wf_writeBuf = new_array(char, wf_writeBufSize);
-				if (!wf_writeBuf)
-					out_of_memory("write_file");
-			}
-			r1 = MIN(len, wf_writeBufSize - wf_writeBufCnt);
-			if (r1) {
-				memcpy(wf_writeBuf + wf_writeBufCnt, buf, r1);
-				wf_writeBufCnt += r1;
-			}
-			if (wf_writeBufCnt == wf_writeBufSize) {
-				if (flush_write_file(f) < 0)
-					return -1;
-				if (!r1 && len)
-					continue;
-			}
-		}
+	if (!sparse_files) {
+		return write(f,buf,len);
+	}
+
+	while (len>0) {
+		int len1 = MIN(len, SPARSE_WRITE_SIZE);
+		int r1 = write_sparse(f, buf, len1);
 		if (r1 <= 0) {
-			if (ret > 0)
-				return ret;
+			if (ret > 0) return ret;
 			return r1;
 		}
 		len -= r1;
@@ -139,67 +92,75 @@ int write_file(int f,char *buf,size_t len)
 }
 
 
-/* This provides functionality somewhat similar to mmap() but using read().
- * It gives sliding window access to a file.  mmap() is not used because of
- * the possibility of another program (such as a mailer) truncating the
- * file thus giving us a SIGBUS. */
-struct map_struct *map_file(int fd, OFF_T len, int32 read_size,
-			    int32 blk_size)
+
+/* this provides functionality somewhat similar to mmap() but using
+   read(). It gives sliding window access to a file. mmap() is not
+   used because of the possibility of another program (such as a
+   mailer) truncating the file thus giving us a SIGBUS */
+struct map_struct *map_file(int fd,OFF_T len)
 {
 	struct map_struct *map;
+	map = (struct map_struct *)malloc(sizeof(*map));
+	if (!map) out_of_memory("map_file");
 
-	if (!(map = new(struct map_struct)))
-		out_of_memory("map_file");
-
-	if (blk_size && (read_size % blk_size))
-		read_size += blk_size - (read_size % blk_size);
-
-	memset(map, 0, sizeof map[0]);
 	map->fd = fd;
 	map->file_size = len;
-	map->def_window_size = read_size;
+	map->p = NULL;
+	map->p_size = 0;
+	map->p_offset = 0;
+	map->p_fd_offset = 0;
+	map->p_len = 0;
 
 	return map;
 }
 
-
 /* slide the read window in the file */
-char *map_ptr(struct map_struct *map, OFF_T offset, int32 len)
+char *map_ptr(struct map_struct *map,OFF_T offset,int len)
 {
-	int32 nread;
+	int nread;
 	OFF_T window_start, read_start;
-	int32 window_size, read_size, read_offset;
+	int window_size, read_size, read_offset;
 
-	if (len == 0)
+	if (len == 0) {
 		return NULL;
-	if (len < 0) {
-		rprintf(FERROR, "invalid len passed to map_ptr: %ld\n",
-			(long)len);
-		exit_cleanup(RERR_FILEIO);
+	}
+
+	/* can't go beyond the end of file */
+	if (len > (map->file_size - offset)) {
+		len = map->file_size - offset;
 	}
 
 	/* in most cases the region will already be available */
-	if (offset >= map->p_offset && offset+len <= map->p_offset+map->p_len)
-		return map->p + (offset - map->p_offset);
+	if (offset >= map->p_offset && 
+	    offset+len <= map->p_offset+map->p_len) {
+		return (map->p + (offset - map->p_offset));
+	}
+
 
 	/* nope, we are going to have to do a read. Work out our desired window */
-	window_start = offset;
-	window_size = map->def_window_size;
-	if (window_start + window_size > map->file_size)
+	if (offset > 2*CHUNK_SIZE) {
+		window_start = offset - 2*CHUNK_SIZE;
+		window_start &= ~((OFF_T)(CHUNK_SIZE-1)); /* assumes power of 2 */
+	} else {
+		window_start = 0;
+	}
+	window_size = MAX_MAP_SIZE;
+	if (window_start + window_size > map->file_size) {
 		window_size = map->file_size - window_start;
-	if (len > window_size)
-		window_size = len;
+	}
+	if (offset + len > window_start + window_size) {
+		window_size = (offset+len) - window_start;
+	}
 
 	/* make sure we have allocated enough memory for the window */
 	if (window_size > map->p_size) {
-		map->p = realloc_array(map->p, char, window_size);
-		if (!map->p)
-			out_of_memory("map_ptr");
+		map->p = (char *)Realloc(map->p, window_size);
+		if (!map->p) out_of_memory("map_ptr");
 		map->p_size = window_size;
 	}
 
-	/* Now try to avoid re-reading any bytes by reusing any bytes
-	 * from the previous buffer. */
+	/* now try to avoid re-reading any bytes by reusing any bytes from the previous
+	   buffer. */
 	if (window_start >= map->p_offset &&
 	    window_start < map->p_offset + map->p_len &&
 	    window_start + window_size >= map->p_offset + map->p_len) {
@@ -214,27 +175,18 @@ char *map_ptr(struct map_struct *map, OFF_T offset, int32 len)
 	}
 
 	if (read_size <= 0) {
-		rprintf(FERROR, "invalid read_size of %ld in map_ptr\n",
-			(long)read_size);
-		exit_cleanup(RERR_FILEIO);
+		rprintf(FINFO,"Warning: unexpected read size of %d in map_ptr\n", read_size);
 	} else {
 		if (map->p_fd_offset != read_start) {
-			OFF_T ret = do_lseek(map->fd, read_start, SEEK_SET);
-			if (ret != read_start) {
-				rsyserr(FERROR, errno,
-					"lseek returned %.0f, not %.0f",
-					(double)ret, (double)read_start);
+			if (do_lseek(map->fd,read_start,SEEK_SET) != read_start) {
+				rprintf(FERROR,"lseek failed in map_ptr\n");
 				exit_cleanup(RERR_FILEIO);
 			}
 			map->p_fd_offset = read_start;
 		}
 
 		if ((nread=read(map->fd,map->p + read_offset,read_size)) != read_size) {
-			if (nread < 0) {
-				nread = 0;
-				if (!map->status)
-					map->status = errno;
-			}
+			if (nread < 0) nread = 0;
 			/* the best we can do is zero the buffer - the file
 			   has changed mid transfer! */
 			memset(map->p+read_offset+nread, 0, read_size - nread);
@@ -244,22 +196,18 @@ char *map_ptr(struct map_struct *map, OFF_T offset, int32 len)
 
 	map->p_offset = window_start;
 	map->p_len = window_size;
-
-	return map->p;
+  
+	return map->p + (offset - map->p_offset); 
 }
 
 
-int unmap_file(struct map_struct *map)
+void unmap_file(struct map_struct *map)
 {
-	int	ret;
-
 	if (map->p) {
 		free(map->p);
 		map->p = NULL;
 	}
-	ret = map->status;
-	memset(map, 0, sizeof map[0]);
+	memset(map, 0, sizeof(*map));
 	free(map);
-
-	return ret;
 }
+

getfsdev.c

@@ -1,23 +0,0 @@
-#include "rsync.h"
-
- int main(int argc, char *argv[])
-{
-	STRUCT_STAT st;
-	int ret;
-
-	while (--argc > 0) {
-#ifdef USE_STAT64_FUNCS
-		ret = stat64(*++argv, &st);
-#else
-		ret = stat(*++argv, &st);
-#endif
-		if (ret < 0) {
-			fprintf(stderr, "Unable to stat `%s'\n", *argv);
-			exit(1);
-		}
-		printf("%ld/%ld\n", (long)major(st.st_dev),
-				    (long)minor(st.st_dev));
-	}
-
-	return 0;
-}

getgroups.c

@@ -1,68 +0,0 @@
-/*
- * Copyright (C) 2002 by Martin Pool
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- * 
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/**
- * @file getgroups.c
- *
- * Print out the gids of all groups for the current user.  This is
- * like `id -G` on Linux, but it's too hard to find a portable
- * equivalent.
- **/
-
-#include "rsync.h"
-
-int
-main(UNUSED(int argc), UNUSED(char *argv[]))
-{
-	int n, i;
-	gid_t *list;
-	gid_t gid = MY_GID();
-	int gid_in_list = 0;
-
-#ifdef HAVE_GETGROUPS
-	if ((n = getgroups(0, NULL)) < 0) {
-		perror("getgroups");
-		return 1;
-	}
-#else
-	n = 0;
-#endif
-
-	list = (gid_t*)malloc(sizeof (gid_t) * (n + 1));
-	if (!list) {
-		fprintf(stderr, "out of memory!\n");
-		exit(1);
-	}
-
-#ifdef HAVE_GETGROUPS
-	if (n > 0)
-		n = getgroups(n, list);
-#endif
-
-	for (i = 0; i < n; i++)  {
-		printf("%lu ", (unsigned long)list[i]);
-		if (list[i] == gid)
-			gid_in_list = 1;
-	}
-	/* The default gid might not be in the list on some systems. */
-	if (!gid_in_list)
-		printf("%lu", (unsigned long)gid);
-	printf("\n");
-		
-	return 0;
-}

hlink.c

@@ -1,18 +1,18 @@
-/*
+/* 
    Copyright (C) Andrew Tridgell 1996
    Copyright (C) Paul Mackerras 1996
    Copyright (C) 2002 by Martin Pool <mbp@samba.org>
-
+   
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
-
+   
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
+   
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
@@ -22,246 +22,158 @@
 
 extern int dry_run;
 extern int verbose;
-extern int make_backups;
-extern struct file_list *the_file_list;
 
-#ifdef SUPPORT_HARD_LINKS
-
-#define SKIPPED_LINK (-1)
-#define FINISHED_LINK (-2)
-
-#define FPTR(i) (the_file_list->files[i])
-#define LINKED(p1,p2) (FPTR(p1)->F_DEV == FPTR(p2)->F_DEV \
-		    && FPTR(p1)->F_INODE == FPTR(p2)->F_INODE)
-
-static int hlink_compare(int *int1, int *int2)
+#if SUPPORT_HARD_LINKS
+static int hlink_compare(struct file_struct *f1, struct file_struct *f2)
 {
-	struct file_struct *f1 = FPTR(*int1);
-	struct file_struct *f2 = FPTR(*int2);
+	if (!S_ISREG(f1->mode) && !S_ISREG(f2->mode))
+		return 0;
+	if (!S_ISREG(f1->mode))
+		return -1;
+	if (!S_ISREG(f2->mode))
+		return 1;
 
-	if (f1->F_DEV != f2->F_DEV)
-		return (int) (f1->F_DEV > f2->F_DEV ? 1 : -1);
+	if (f1->dev != f2->dev)
+		return (int) (f1->dev > f2->dev ? 1 : -1);
 
-	if (f1->F_INODE != f2->F_INODE)
-		return (int) (f1->F_INODE > f2->F_INODE ? 1 : -1);
+	if (f1->inode != f2->inode)
+		return (int) (f1->inode > f2->inode ? 1 : -1);
 
-	return f_name_cmp(f1, f2);
+	return file_compare(&f1, &f2);
 }
 
-static int *hlink_list;
+
+static struct file_struct *hlink_list;
 static int hlink_count;
-
-/* Analyze the data in the hlink_list[], remove items that aren't multiply
- * linked, and replace the dev+inode data with the hlindex+next linked list. */
-static void link_idev_data(void)
-{
-	int cur, from, to, start;
-
-	alloc_pool_t hlink_pool;
-	alloc_pool_t idev_pool = the_file_list->hlink_pool;
-
-	hlink_pool = pool_create(128 * 1024, sizeof (struct hlink),
-	    out_of_memory, POOL_INTERN);
-
-	for (from = to = 0; from < hlink_count; from++) {
-		start = from;
-		while (1) {
-			cur = hlink_list[from];
-			if (from == hlink_count-1
-			    || !LINKED(cur, hlink_list[from+1]))
-				break;
-			pool_free(idev_pool, 0, FPTR(cur)->link_u.idev);
-			FPTR(cur)->link_u.links = pool_talloc(hlink_pool,
-			    struct hlink, 1, "hlink_list");
-
-			FPTR(cur)->F_HLINDEX = to;
-			FPTR(cur)->F_NEXT = hlink_list[++from];
-		}
-		pool_free(idev_pool, 0, FPTR(cur)->link_u.idev);
-		if (from > start) {
-			int head = hlink_list[start];
-			FPTR(cur)->link_u.links = pool_talloc(hlink_pool,
-			    struct hlink, 1, "hlink_list");
-
-			FPTR(head)->flags |= FLAG_HLINK_TOL;
-			FPTR(cur)->F_HLINDEX = to;
-			FPTR(cur)->F_NEXT = head;
-			FPTR(cur)->flags |= FLAG_HLINK_EOL;
-			hlink_list[to++] = head;
-		} else
-			FPTR(cur)->link_u.links = NULL;
-	}
-
-	if (!to) {
-		free(hlink_list);
-		hlink_list = NULL;
-		pool_destroy(hlink_pool);
-		hlink_pool = NULL;
-	} else {
-		hlink_count = to;
-		hlink_list = realloc_array(hlink_list, int, hlink_count);
-		if (!hlink_list)
-			out_of_memory("init_hard_links");
-	}
-	the_file_list->hlink_pool = hlink_pool;
-	pool_destroy(idev_pool);
-}
 #endif
 
-void init_hard_links(void)
+void init_hard_links(struct file_list *flist)
 {
-#ifdef SUPPORT_HARD_LINKS
+#if SUPPORT_HARD_LINKS
 	int i;
+	if (flist->count < 2)
+		return;
 
 	if (hlink_list)
 		free(hlink_list);
 
-	if (!(hlink_list = new_array(int, the_file_list->count)))
+	if (!(hlink_list =
+	      (struct file_struct *) malloc(sizeof(hlink_list[0]) *
+					    flist->count)))
 		out_of_memory("init_hard_links");
 
-	hlink_count = 0;
-	for (i = 0; i < the_file_list->count; i++) {
-		if (FPTR(i)->link_u.idev)
-			hlink_list[hlink_count++] = i;
-	}
+	for (i = 0; i < flist->count; i++)
+		memcpy(&hlink_list[i], flist->files[i],
+		       sizeof(hlink_list[0]));
 
-	qsort(hlink_list, hlink_count,
-	    sizeof hlink_list[0], (int (*)()) hlink_compare);
+	qsort(hlink_list, flist->count,
+	      sizeof(hlink_list[0]), (int (*)()) hlink_compare);
 
-	if (!hlink_count) {
-		free(hlink_list);
-		hlink_list = NULL;
-	} else
-		link_idev_data();
+	hlink_count = flist->count;
 #endif
 }
 
-#ifdef SUPPORT_HARD_LINKS
-static int maybe_hard_link(struct file_struct *file, int ndx,
-			   char *fname, int statret, STRUCT_STAT *st,
-			   char *toname, STRUCT_STAT *to_st,
-			   int itemizing, enum logcode code)
+/* check if a file should be skipped because it is the same as an
+   earlier hard link */
+int check_hard_link(struct file_struct *file)
 {
-	if (statret == 0) {
-		if (st->st_dev == to_st->st_dev
-		 && st->st_ino == to_st->st_ino) {
-			if (itemizing) {
-				itemize(file, ndx, statret, st,
-					ITEM_LOCAL_CHANGE | ITEM_XNAME_FOLLOWS,
-					0, "");
-			}
-			return 0;
-		}
-		if (make_backups) {
-			if (!make_backup(fname))
-				return -1;
-		} else if (robust_unlink(fname)) {
-			rsyserr(FERROR, errno, "unlink %s failed",
-				full_fname(fname));
-			return -1;
-		}
-	}
-	return hard_link_one(file, ndx, fname, statret, st, toname,
-			     0, itemizing, code);
-}
-#endif
+#if SUPPORT_HARD_LINKS
+	int low = 0, high = hlink_count - 1;
+	int ret = 0;
 
-int hard_link_check(struct file_struct *file, int ndx, char *fname,
-		    int statret, STRUCT_STAT *st, int itemizing,
-		    enum logcode code, int skip)
-{
-#ifdef SUPPORT_HARD_LINKS
-	int head;
-	if (!file->link_u.links)
+	if (!hlink_list || !S_ISREG(file->mode))
 		return 0;
-	if (skip && !(file->flags & FLAG_HLINK_EOL))
-		head = hlink_list[file->F_HLINDEX] = file->F_NEXT;
-	else
-		head = hlink_list[file->F_HLINDEX];
-	if (ndx != head) {
-		struct file_struct *head_file = FPTR(head);
-		if (verbose > 2) {
-			rprintf(FINFO, "\"%s\" is a hard link\n",
-				safe_fname(f_name(file)));
+
+	while (low != high) {
+		int mid = (low + high) / 2;
+		ret = hlink_compare(&hlink_list[mid], file);
+		if (ret == 0) {
+			low = mid;
+			break;
 		}
-		if (head_file->F_HLINDEX == FINISHED_LINK) {
-			STRUCT_STAT st2;
-			char *toname = f_name(head_file);
-			if (link_stat(toname, &st2, 0) < 0) {
-				rsyserr(FERROR, errno, "stat %s failed",
-					full_fname(toname));
-				return -1;
-			}
-			maybe_hard_link(file, ndx, fname, statret, st,
-					toname, &st2, itemizing, code);
-			file->F_HLINDEX = FINISHED_LINK;
-		} else
-			file->F_HLINDEX = SKIPPED_LINK;
+		if (ret > 0)
+			high = mid;
+		else
+			low = mid + 1;
+	}
+
+	if (hlink_compare(&hlink_list[low], file) != 0)
+		return 0;
+
+	if (low > 0 &&
+	    S_ISREG(hlink_list[low - 1].mode) &&
+	    file->dev == hlink_list[low - 1].dev &&
+	    file->inode == hlink_list[low - 1].inode)
 		return 1;
-	}
 #endif
+
 	return 0;
 }
 
-#ifdef SUPPORT_HARD_LINKS
-int hard_link_one(struct file_struct *file, int ndx, char *fname,
-		  int statret, STRUCT_STAT *st, char *toname, int terse,
-		  int itemizing, enum logcode code)
+
+#if SUPPORT_HARD_LINKS
+static void hard_link_one(int i)
 {
-	if (do_link(toname, fname)) {
-		if (terse) {
-			if (!verbose)
-				return -1;
-			code = FINFO;
-		} else
-			code = FERROR;
-		rsyserr(code, errno, "link %s => %s failed",
-			full_fname(fname), safe_fname(toname));
-		return -1;
-	}
-
-	if (itemizing) {
-		itemize(file, ndx, statret, st,
-			ITEM_LOCAL_CHANGE | ITEM_XNAME_FOLLOWS, 0,
-			terse ? "" : toname);
-	}
-	if (code && verbose && !terse) {
-		rprintf(code, "%s => %s\n",
-			safe_fname(fname), safe_fname(toname));
-	}
-	return 0;
-}
-#endif
-
-
-void hard_link_cluster(struct file_struct *file, int master, int itemizing,
-		       enum logcode code)
-{
-#ifdef SUPPORT_HARD_LINKS
-	char hlink1[MAXPATHLEN];
-	char *hlink2;
 	STRUCT_STAT st1, st2;
-	int statret, ndx = master;
 
-	file->F_HLINDEX = FINISHED_LINK;
-	if (link_stat(f_name_to(file, hlink1), &st1, 0) < 0)
+	if (link_stat(f_name(&hlink_list[i - 1]), &st1) != 0)
 		return;
-	if (!(file->flags & FLAG_HLINK_TOL)) {
-		while (!(file->flags & FLAG_HLINK_EOL)) {
-			ndx = file->F_NEXT;
-			file = FPTR(ndx);
+
+	if (link_stat(f_name(&hlink_list[i]), &st2) != 0) {
+		if (do_link
+		    (f_name(&hlink_list[i - 1]),
+		     f_name(&hlink_list[i])) != 0) {
+			if (verbose > 0)
+				rprintf(FINFO, "link %s => %s : %s\n",
+					f_name(&hlink_list[i]),
+					f_name(&hlink_list[i - 1]),
+					strerror(errno));
+			return;
+		}
+	} else {
+		if (st2.st_dev == st1.st_dev && st2.st_ino == st1.st_ino)
+			return;
+
+		if (robust_unlink(f_name(&hlink_list[i])) != 0 ||
+		    do_link(f_name(&hlink_list[i - 1]),
+			    f_name(&hlink_list[i])) != 0) {
+			if (verbose > 0)
+				rprintf(FINFO, "link %s => %s : %s\n",
+					f_name(&hlink_list[i]),
+					f_name(&hlink_list[i - 1]),
+					strerror(errno));
+			return;
+		}
+	}
+	if (verbose > 0)
+		rprintf(FINFO, "%s => %s\n",
+			f_name(&hlink_list[i]),
+			f_name(&hlink_list[i - 1]));
+}
+#endif
+
+
+
+/**
+ * Create any hard links in the global hlink_list.  They were put
+ * there by running init_hard_links on the filelist.
+ **/
+void do_hard_links(void)
+{
+#if SUPPORT_HARD_LINKS
+	int i;
+
+	if (!hlink_list)
+		return;
+
+	for (i = 1; i < hlink_count; i++) {
+		if (S_ISREG(hlink_list[i].mode) &&
+		    S_ISREG(hlink_list[i - 1].mode) &&
+		    hlink_list[i].basename && hlink_list[i - 1].basename &&
+		    hlink_list[i].dev == hlink_list[i - 1].dev &&
+		    hlink_list[i].inode == hlink_list[i - 1].inode) {
+			hard_link_one(i);
 		}
 	}
-	do {
-		ndx = file->F_NEXT;
-		file = FPTR(ndx);
-		if (file->F_HLINDEX != SKIPPED_LINK)
-			continue;
-		hlink2 = f_name(file);
-		statret = link_stat(hlink2, &st2, 0);
-		maybe_hard_link(file, ndx, hlink2, statret, &st2,
-				hlink1, &st1, itemizing, code);
-		file->F_HLINDEX = FINISHED_LINK;
-	} while (!(file->flags & FLAG_HLINK_EOL));
 #endif
 }

install-sh

@@ -208,7 +208,7 @@ else
 
 # Make a temp file name in the proper directory.
 
-	dsttmp=$dstdir/_inst.$$_
+	dsttmp=$dstdir/#inst.$$#
 
 # Move or copy the file name to the temp name
 

lib/.cvsignore

@@ -1 +1,49 @@
+.cvsignore
+Makefile
+a
+b
+config.cache
+config.h
+config.log
+config.status
+dist.tar.gz
 dummy
+rsync
+rsync-0.1
+rsync-0.1
+rsync-0.1
+rsync-0.1.tar.gz
+rsync-0.2
+rsync-0.2
+rsync-0.2.tar.gz
+rsync-0.3
+rsync-0.3
+rsync-0.3.tar.gz
+rsync-0.4
+rsync-0.4
+rsync-0.4.tar.gz
+rsync-0.5
+rsync-0.5
+rsync-0.5
+rsync-0.5
+rsync-0.5
+rsync-0.5
+rsync-0.5
+rsync-0.5
+rsync-0.5.tar.gz
+rsync-0.6
+rsync-0.7
+rsync-0.7
+rsync-0.8
+rsync-0.8
+rsync-0.8
+rsync-0.8
+rsync-ERSION
+rsync.aux
+rsync.dvi
+rsync.log
+tech_report.aux
+tech_report.dvi
+tech_report.log
+tech_report.ps
+test

lib/compat.c

@@ -1,6 +1,5 @@
 /* 
    Copyright (C) Andrew Tridgell 1998
-   Copyright (C) 2002 by Martin Pool
    
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -17,15 +16,11 @@
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
-/**
- * @file compat.c
- *
- * Reimplementations of standard functions for platforms that don't
- * have them.
- **/
-
-
+/*
+  compatibility functions - replacing functions for platforms that don't
+  have them.
 
+  */
 #include "rsync.h"
 
 
@@ -83,11 +78,9 @@
 #endif
 
 #ifndef HAVE_STRPBRK
-/**
- * Find the first ocurrence in @p s of any character in @p accept.
- *
- * Derived from glibc 
- **/
+/* Find the first ocurrence in S of any character in ACCEPT.  
+   derived from glibc 
+*/
  char *strpbrk(const char *s, const char *accept)
 {
 	while (*s != '\0')  {
@@ -104,45 +97,36 @@
 
 
 #ifndef HAVE_STRLCPY
-/**
- * Like strncpy but does not 0 fill the buffer and always null 
- * terminates.
+/* Like strncpy but does not 0 fill the buffer and always null 
+ * terminates. bufsize is the size of the destination buffer.
  *
- * @param bufsize is the size of the destination buffer.
- *
- * @return index of the terminating byte.
- **/
+ * Returns the index of the terminating byte. */
  size_t strlcpy(char *d, const char *s, size_t bufsize)
 {
 	size_t len = strlen(s);
 	size_t ret = len;
-	if (bufsize > 0) {
-		if (len >= bufsize)
-			len = bufsize-1;
-		memcpy(d, s, len);
-		d[len] = 0;
-	}
+	if (bufsize <= 0) return 0;
+	if (len >= bufsize) len = bufsize-1;
+	memcpy(d, s, len);
+	d[len] = 0;
 	return ret;
 }
 #endif
 
 #ifndef HAVE_STRLCAT
-/**
- * Like strncat() but does not 0 fill the buffer and always null 
- * terminates.
- *
- * @param bufsize length of the buffer, which should be one more than
- * the maximum resulting string length.
- **/
+/* like strncat but does not 0 fill the buffer and always null 
+   terminates. bufsize is the length of the buffer, which should
+   be one more than the maximum resulting string length */
  size_t strlcat(char *d, const char *s, size_t bufsize)
 {
 	size_t len1 = strlen(d);
 	size_t len2 = strlen(s);
 	size_t ret = len1 + len2;
 
-	if (len1 < bufsize - 1) {
-		if (len2 >= bufsize - len1)
-			len2 = bufsize - len1 - 1;
+	if (len1+len2 >= bufsize) {
+		len2 = bufsize - (len1+1);
+	}
+	if (len2 > 0) {
 		memcpy(d+len1, s, len2);
 		d[len1+len2] = 0;
 	}
@@ -155,7 +139,7 @@
 {
 	unsigned char *p = (unsigned char *)&ip.s_addr;
 	static char buf[18];
-#ifdef WORDS_BIGENDIAN
+#if WORDS_BIGENDIAN
 	snprintf(buf, 18, "%d.%d.%d.%d", 
 		 (int)p[0], (int)p[1], (int)p[2], (int)p[3]);
 #else
@@ -196,7 +180,7 @@
 /* some systems don't take the 2nd argument */
 int sys_gettimeofday(struct timeval *tv)
 {
-#ifdef HAVE_GETTIMEOFDAY_TZ
+#if HAVE_GETTIMEOFDAY_TZ
 	return gettimeofday(tv, NULL);
 #else
 	return gettimeofday(tv);

lib/fnmatch.c

@@ -0,0 +1,482 @@
+#include "../rsync.h"
+#ifndef HAVE_FNMATCH
+
+/* ----- THE FOLLOWING UP TO 'END' is glibc-2.1.2 posix/fnmatch.c
+     except for the parts with '#if 0' */
+
+/* Copyright (C) 1991, 92, 93, 96, 97, 98, 99 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with this library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#if 0	/* header files included better by ../rsync.h */
+
+#if HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+/* Enable GNU extensions in fnmatch.h.  */
+#ifndef _GNU_SOURCE
+# define _GNU_SOURCE	1
+#endif
+
+#include <errno.h>
+#include <fnmatch.h>
+#include <ctype.h>
+
+#if HAVE_STRING_H || defined _LIBC
+# include <string.h>
+#else
+# include <strings.h>
+#endif
+
+#if defined STDC_HEADERS || defined _LIBC
+# include <stdlib.h>
+#endif
+
+#endif /* 0 */
+/* For platform which support the ISO C amendement 1 functionality we
+   support user defined character classes.  */
+#if defined _LIBC || (defined HAVE_WCTYPE_H && defined HAVE_WCHAR_H)
+/* Solaris 2.5 has a bug: <wchar.h> must be included before <wctype.h>.  */
+# include <wchar.h>
+# include <wctype.h>
+#endif
+
+/* Comment out all this code if we are using the GNU C Library, and are not
+   actually compiling the library itself.  This code is part of the GNU C
+   Library, but also included in many other GNU distributions.  Compiling
+   and linking in this code is a waste when using the GNU C library
+   (especially if it is a shared library).  Rather than having every GNU
+   program understand `configure --with-gnu-libc' and omit the object files,
+   it is simpler to just do this in the source for each such file.  */
+
+#if 1
+
+# if defined STDC_HEADERS || !defined isascii
+#  define ISASCII(c) 1
+# else
+#  define ISASCII(c) isascii(c)
+# endif
+
+#ifdef isblank
+# define ISBLANK(c) (ISASCII (c) && isblank (c))
+#else
+# define ISBLANK(c) ((c) == ' ' || (c) == '\t')
+#endif
+#ifdef isgraph
+# define ISGRAPH(c) (ISASCII (c) && isgraph (c))
+#else
+# define ISGRAPH(c) (ISASCII (c) && isprint (c) && !isspace (c))
+#endif
+
+#define ISPRINT(c) (ISASCII (c) && isprint (c))
+#define ISDIGIT(c) (ISASCII (c) && isdigit (c))
+#define ISALNUM(c) (ISASCII (c) && isalnum (c))
+#define ISALPHA(c) (ISASCII (c) && isalpha (c))
+#define ISCNTRL(c) (ISASCII (c) && iscntrl (c))
+#define ISLOWER(c) (ISASCII (c) && islower (c))
+#define ISPUNCT(c) (ISASCII (c) && ispunct (c))
+#define ISSPACE(c) (ISASCII (c) && isspace (c))
+#define ISUPPER(c) (ISASCII (c) && isupper (c))
+#define ISXDIGIT(c) (ISASCII (c) && isxdigit (c))
+
+# define STREQ(s1, s2) ((strcmp (s1, s2) == 0))
+
+# if defined _LIBC || (defined HAVE_WCTYPE_H && defined HAVE_WCHAR_H)
+/* The GNU C library provides support for user-defined character classes
+   and the functions from ISO C amendement 1.  */
+#  ifdef CHARCLASS_NAME_MAX
+#   define CHAR_CLASS_MAX_LENGTH CHARCLASS_NAME_MAX
+#  else
+/* This shouldn't happen but some implementation might still have this
+   problem.  Use a reasonable default value.  */
+#   define CHAR_CLASS_MAX_LENGTH 256
+#  endif
+
+#  ifdef _LIBC
+#   define IS_CHAR_CLASS(string) __wctype (string)
+#  else
+#   define IS_CHAR_CLASS(string) wctype (string)
+#  endif
+# else
+#  define CHAR_CLASS_MAX_LENGTH  6 /* Namely, `xdigit'.  */
+
+#  define IS_CHAR_CLASS(string)						      \
+   (STREQ (string, "alpha") || STREQ (string, "upper")			      \
+    || STREQ (string, "lower") || STREQ (string, "digit")		      \
+    || STREQ (string, "alnum") || STREQ (string, "xdigit")		      \
+    || STREQ (string, "space") || STREQ (string, "print")		      \
+    || STREQ (string, "punct") || STREQ (string, "graph")		      \
+    || STREQ (string, "cntrl") || STREQ (string, "blank"))
+# endif
+
+/* Avoid depending on library functions or files
+   whose names are inconsistent.  */
+
+# if !defined _LIBC && !defined getenv
+extern char *getenv ();
+# endif
+
+# ifndef errno
+extern int errno;
+# endif
+
+/* Match STRING against the filename pattern PATTERN, returning zero if
+   it matches, nonzero if not.  */
+static int
+#ifdef _LIBC
+internal_function
+#endif
+internal_fnmatch (const char *pattern, const char *string,
+		  int no_leading_period, int flags)
+{
+  register const char *p = pattern, *n = string;
+  register unsigned char c;
+
+/* Note that this evaluates C many times.  */
+# ifdef _LIBC
+#  define FOLD(c) ((flags & FNM_CASEFOLD) ? tolower (c) : (c))
+# else
+#  define FOLD(c) ((flags & FNM_CASEFOLD) && ISUPPER (c) ? tolower (c) : (c))
+# endif
+
+  while ((c = *p++) != '\0')
+    {
+      c = FOLD (c);
+
+      switch (c)
+	{
+	case '?':
+	  if (*n == '\0')
+	    return FNM_NOMATCH;
+	  else if (*n == '/' && (flags & FNM_FILE_NAME))
+	    return FNM_NOMATCH;
+	  else if (*n == '.' && no_leading_period
+		   && (n == string
+		       || (n[-1] == '/' && (flags & FNM_FILE_NAME))))
+	    return FNM_NOMATCH;
+	  break;
+
+	case '\\':
+	  if (!(flags & FNM_NOESCAPE))
+	    {
+	      c = *p++;
+	      if (c == '\0')
+		/* Trailing \ loses.  */
+		return FNM_NOMATCH;
+	      c = FOLD (c);
+	    }
+	  if (FOLD ((unsigned char) *n) != c)
+	    return FNM_NOMATCH;
+	  break;
+
+	case '*':
+	  if (*n == '.' && no_leading_period
+	      && (n == string
+		  || (n[-1] == '/' && (flags & FNM_FILE_NAME))))
+	    return FNM_NOMATCH;
+
+	  for (c = *p++; c == '?' || c == '*'; c = *p++)
+	    {
+	      if (*n == '/' && (flags & FNM_FILE_NAME))
+		/* A slash does not match a wildcard under FNM_FILE_NAME.  */
+		return FNM_NOMATCH;
+	      else if (c == '?')
+		{
+		  /* A ? needs to match one character.  */
+		  if (*n == '\0')
+		    /* There isn't another character; no match.  */
+		    return FNM_NOMATCH;
+		  else
+		    /* One character of the string is consumed in matching
+		       this ? wildcard, so *??? won't match if there are
+		       less than three characters.  */
+		    ++n;
+		}
+	    }
+
+	  if (c == '\0')
+	    /* The wildcard(s) is/are the last element of the pattern.
+	       If the name is a file name and contains another slash
+	       this does mean it cannot match.  */
+	    return ((flags & FNM_FILE_NAME) && strchr (n, '/') != NULL
+		    ? FNM_NOMATCH : 0);
+	  else
+	    {
+	      const char *endp;
+
+#if 0
+	      endp = __strchrnul (n, (flags & FNM_FILE_NAME) ? '/' : '\0');
+#else
+/* replace call to internal glibc function with equivalent */
+	      if (!(flags & FNM_FILE_NAME) || ((endp = strchr(n, '/')) == NULL))
+		endp = n + strlen(n);
+#endif
+
+	      if (c == '[')
+		{
+		  int flags2 = ((flags & FNM_FILE_NAME)
+				? flags : (flags & ~FNM_PERIOD));
+
+		  for (--p; n < endp; ++n)
+		    if (internal_fnmatch (p, n,
+					  (no_leading_period
+					   && (n == string
+					       || (n[-1] == '/'
+						   && (flags
+						       & FNM_FILE_NAME)))),
+					  flags2)
+			== 0)
+		      return 0;
+		}
+	      else if (c == '/' && (flags & FNM_FILE_NAME))
+		{
+		  while (*n != '\0' && *n != '/')
+		    ++n;
+		  if (*n == '/'
+		      && (internal_fnmatch (p, n + 1, flags & FNM_PERIOD,
+					    flags) == 0))
+		    return 0;
+		}
+	      else
+		{
+		  int flags2 = ((flags & FNM_FILE_NAME)
+				? flags : (flags & ~FNM_PERIOD));
+
+		  if (c == '\\' && !(flags & FNM_NOESCAPE))
+		    c = *p;
+		  c = FOLD (c);
+		  for (--p; n < endp; ++n)
+		    if (FOLD ((unsigned char) *n) == c
+			&& (internal_fnmatch (p, n,
+					      (no_leading_period
+					       && (n == string
+						   || (n[-1] == '/'
+						       && (flags
+							   & FNM_FILE_NAME)))),
+					      flags2) == 0))
+		      return 0;
+		}
+	    }
+
+	  /* If we come here no match is possible with the wildcard.  */
+	  return FNM_NOMATCH;
+
+	case '[':
+	  {
+	    /* Nonzero if the sense of the character class is inverted.  */
+	    static int posixly_correct;
+	    register int not;
+	    char cold;
+
+	    if (posixly_correct == 0)
+	      posixly_correct = getenv ("POSIXLY_CORRECT") != NULL ? 1 : -1;
+
+	    if (*n == '\0')
+	      return FNM_NOMATCH;
+
+	    if (*n == '.' && no_leading_period && (n == string
+						   || (n[-1] == '/'
+						       && (flags
+							   & FNM_FILE_NAME))))
+	      return FNM_NOMATCH;
+
+	    if (*n == '/' && (flags & FNM_FILE_NAME))
+	      /* `/' cannot be matched.  */
+	      return FNM_NOMATCH;
+
+	    not = (*p == '!' || (posixly_correct < 0 && *p == '^'));
+	    if (not)
+	      ++p;
+
+	    c = *p++;
+	    for (;;)
+	      {
+		unsigned char fn = FOLD ((unsigned char) *n);
+
+		if (!(flags & FNM_NOESCAPE) && c == '\\')
+		  {
+		    if (*p == '\0')
+		      return FNM_NOMATCH;
+		    c = FOLD ((unsigned char) *p);
+		    ++p;
+
+		    if (c == fn)
+		      goto matched;
+		  }
+		else if (c == '[' && *p == ':')
+		  {
+		    /* Leave room for the null.  */
+		    char str[CHAR_CLASS_MAX_LENGTH + 1];
+		    size_t c1 = 0;
+# if defined _LIBC || (defined HAVE_WCTYPE_H && defined HAVE_WCHAR_H)
+		    wctype_t wt;
+# endif
+		    const char *startp = p;
+
+		    for (;;)
+		      {
+			if (c1 == CHAR_CLASS_MAX_LENGTH)
+			  /* The name is too long and therefore the pattern
+			     is ill-formed.  */
+			  return FNM_NOMATCH;
+
+			c = *++p;
+			if (c == ':' && p[1] == ']')
+			  {
+			    p += 2;
+			    break;
+			  }
+			if (c < 'a' || c >= 'z')
+			  {
+			    /* This cannot possibly be a character class name.
+			       Match it as a normal range.  */
+			    p = startp;
+			    c = '[';
+			    goto normal_bracket;
+			  }
+			str[c1++] = c;
+		      }
+		    str[c1] = '\0';
+
+# if defined _LIBC || (defined HAVE_WCTYPE_H && defined HAVE_WCHAR_H)
+		    wt = IS_CHAR_CLASS (str);
+		    if (wt == 0)
+		      /* Invalid character class name.  */
+		      return FNM_NOMATCH;
+
+		    if (__iswctype (__btowc ((unsigned char) *n), wt))
+		      goto matched;
+# else
+		    if ((STREQ (str, "alnum") && ISALNUM ((unsigned char) *n))
+			|| (STREQ (str, "alpha") && ISALPHA ((unsigned char) *n))
+			|| (STREQ (str, "blank") && ISBLANK ((unsigned char) *n))
+			|| (STREQ (str, "cntrl") && ISCNTRL ((unsigned char) *n))
+			|| (STREQ (str, "digit") && ISDIGIT ((unsigned char) *n))
+			|| (STREQ (str, "graph") && ISGRAPH ((unsigned char) *n))
+			|| (STREQ (str, "lower") && ISLOWER ((unsigned char) *n))
+			|| (STREQ (str, "print") && ISPRINT ((unsigned char) *n))
+			|| (STREQ (str, "punct") && ISPUNCT ((unsigned char) *n))
+			|| (STREQ (str, "space") && ISSPACE ((unsigned char) *n))
+			|| (STREQ (str, "upper") && ISUPPER ((unsigned char) *n))
+			|| (STREQ (str, "xdigit") && ISXDIGIT ((unsigned char) *n)))
+		      goto matched;
+# endif
+		  }
+		else if (c == '\0')
+		  /* [ (unterminated) loses.  */
+		  return FNM_NOMATCH;
+		else
+		  {
+		  normal_bracket:
+		    if (FOLD (c) == fn)
+		      goto matched;
+
+		    cold = c;
+		    c = *p++;
+
+		    if (c == '-' && *p != ']')
+		      {
+			/* It is a range.  */
+			unsigned char cend = *p++;
+			if (!(flags & FNM_NOESCAPE) && cend == '\\')
+			  cend = *p++;
+			if (cend == '\0')
+			  return FNM_NOMATCH;
+
+			if (cold <= fn && fn <= FOLD (cend))
+			  goto matched;
+
+			c = *p++;
+		      }
+		  }
+
+		if (c == ']')
+		  break;
+	      }
+
+	    if (!not)
+	      return FNM_NOMATCH;
+	    break;
+
+	  matched:
+	    /* Skip the rest of the [...] that already matched.  */
+	    while (c != ']')
+	      {
+		if (c == '\0')
+		  /* [... (unterminated) loses.  */
+		  return FNM_NOMATCH;
+
+		c = *p++;
+		if (!(flags & FNM_NOESCAPE) && c == '\\')
+		  {
+		    if (*p == '\0')
+		      return FNM_NOMATCH;
+		    /* XXX 1003.2d11 is unclear if this is right.  */
+		    ++p;
+		  }
+		else if (c == '[' && *p == ':')
+		  {
+		    do
+		      if (*++p == '\0')
+			return FNM_NOMATCH;
+		    while (*p != ':' || p[1] == ']');
+		    p += 2;
+		    c = *p;
+		  }
+	      }
+	    if (not)
+	      return FNM_NOMATCH;
+	  }
+	  break;
+
+	default:
+	  if (c != FOLD ((unsigned char) *n))
+	    return FNM_NOMATCH;
+	}
+
+      ++n;
+    }
+
+  if (*n == '\0')
+    return 0;
+
+  if ((flags & FNM_LEADING_DIR) && *n == '/')
+    /* The FNM_LEADING_DIR flag says that "foo*" matches "foobar/frobozz".  */
+    return 0;
+
+  return FNM_NOMATCH;
+
+# undef FOLD
+}
+
+
+int
+fnmatch (pattern, string, flags)
+     const char *pattern;
+     const char *string;
+     int flags;
+{
+  return internal_fnmatch (pattern, string, flags & FNM_PERIOD, flags);
+}
+
+#endif	/* _LIBC or not __GNU_LIBRARY__.  */
+/* ----- END glibc-2.1.2 posix/fnmatch.c */
+
+#else	/* HAVE_FNMATCH */
+void fnmatch_dummy(void) {}
+#endif

lib/fnmatch.h

@@ -0,0 +1,88 @@
+/* Copyright (C) 1991, 92, 93, 96, 97, 98 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef	_FNMATCH_H
+#define	_FNMATCH_H	1
+
+#ifdef	__cplusplus
+extern "C" {
+#endif
+
+#if defined __cplusplus || (defined __STDC__ && __STDC__) || defined WINDOWS32
+# if !defined __GLIBC__ || !defined __P
+#  undef	__P
+#  define __P(protos)	protos
+# endif
+#else /* Not C++ or ANSI C.  */
+# undef	__P
+# define __P(protos)	()
+/* We can get away without defining `const' here only because in this file
+   it is used only inside the prototype for `fnmatch', which is elided in
+   non-ANSI C where `const' is problematical.  */
+#endif /* C++ or ANSI C.  */
+
+#ifndef const
+# if (defined __STDC__ && __STDC__) || defined __cplusplus
+#  define __const	const
+# else
+#  define __const
+# endif
+#endif
+
+/* We #undef these before defining them because some losing systems
+   (HP-UX A.08.07 for example) define these in <unistd.h>.  */
+#undef	FNM_PATHNAME
+#undef	FNM_NOESCAPE
+#undef	FNM_PERIOD
+
+/* Bits set in the FLAGS argument to `fnmatch'.  */
+#define	FNM_PATHNAME	(1 << 0) /* No wildcard can ever match `/'.  */
+#define	FNM_NOESCAPE	(1 << 1) /* Backslashes don't quote special chars.  */
+#define	FNM_PERIOD	(1 << 2) /* Leading `.' is matched only explicitly.  */
+
+#ifndef FNM_FILE_NAME
+# define FNM_FILE_NAME	 FNM_PATHNAME	/* Preferred GNU name.  */
+#endif
+#ifndef FNM_LEADING_DIR
+# define FNM_LEADING_DIR (1 << 3)	/* Ignore `/...' after a match.  */
+#endif
+#ifndef FNM_CASEFOLD
+# define FNM_CASEFOLD	 (1 << 4)	/* Compare without regard to case.  */
+#endif
+
+/* Value returned by `fnmatch' if STRING does not match PATTERN.  */
+#define	FNM_NOMATCH	1
+
+/* This value is returned if the implementation does not support
+   `fnmatch'.  Since this is not the case here it will never be
+   returned but the conformance test suites still require the symbol
+   to be defined.  */
+#ifdef _XOPEN_SOURCE
+# define FNM_NOSYS	(-1)
+#endif
+
+/* Match STRING against the filename pattern PATTERN,
+   returning zero if it matches, FNM_NOMATCH if not.  */
+extern int fnmatch __P ((__const char *__pattern, __const char *__string,
+			 int __flags));
+
+#ifdef	__cplusplus
+}
+#endif
+
+#endif /* fnmatch.h */

lib/inet_pton.c

@@ -27,12 +27,10 @@
  */
 
 static int inet_pton4(const char *src, unsigned char *dst);
-#ifdef INET6
 static int inet_pton6(const char *src, unsigned char *dst);
-#endif
 
 /* int
- * inet_pton(af, src, dst)
+ * isc_net_pton(af, src, dst)
  *	convert from presentation format (which usually means ASCII printable)
  *	to network format (which is usually some kind of binary format).
  * return:

lib/mdfour.c

@@ -109,53 +109,29 @@ void mdfour_begin(struct mdfour *md)
 	md->C = 0x98badcfe;
 	md->D = 0x10325476;
 	md->totalN = 0;
-	md->totalN2 = 0;
 }
 
 
-static void mdfour_tail(unsigned char *in, uint32 n)
+static void mdfour_tail(unsigned char *in, int n)
 {
 	unsigned char buf[128];
 	uint32 M[16];
-	extern int protocol_version;
+	uint32 b;
 
-	/*
-	 * Count total number of bits, modulo 2^64
-	 */
-	m->totalN += n << 3;
-	if (m->totalN < (n << 3)) {
-		m->totalN2++;
-	}
-	m->totalN2 += n >> 29;
+	m->totalN += n;
+
+	b = m->totalN * 8;
 
 	memset(buf, 0, 128);
 	if (n) memcpy(buf, in, n);
 	buf[n] = 0x80;
 
 	if (n <= 55) {
-		copy4(buf+56, m->totalN);
-		/*
-		 * Prior to protocol version 27 only the number of bits
-		 * modulo 2^32 was included.  MD4 requires the number
-		 * of bits modulo 2^64, which was fixed starting with
-		 * protocol version 27.
-		 */
-		if (protocol_version >= 27) {
-			copy4(buf+60, m->totalN2);
-		}
+		copy4(buf+56, b);
 		copy64(M, buf);
 		mdfour64(M);
 	} else {
-		copy4(buf+120, m->totalN); 
-		/*
-		 * Prior to protocol version 27 only the number of bits
-		 * modulo 2^32 was included.  MD4 requires the number
-		 * of bits modulo 2^64, which was fixed starting with
-		 * protocol version 27.
-		 */
-		if (protocol_version >= 27) {
-			copy4(buf+124, m->totalN2); 
-		}
+		copy4(buf+120, b); 
 		copy64(M, buf);
 		mdfour64(M);
 		copy64(M, buf+64);
@@ -163,23 +139,20 @@ static void mdfour_tail(unsigned char *in, uint32 n)
 	}
 }
 
-void mdfour_update(struct mdfour *md, unsigned char *in, uint32 n)
+void mdfour_update(struct mdfour *md, unsigned char *in, int n)
 {
 	uint32 M[16];
 
-	m = md;
-
 	if (n == 0) mdfour_tail(in, n);
 
+	m = md;
+
 	while (n >= 64) {
 		copy64(M, in);
 		mdfour64(M);
 		in += 64;
 		n -= 64;
-		m->totalN += 64 << 3;
-		if (m->totalN < 64 << 3) {
-			m->totalN2++;
-		}
+		m->totalN += 64;
 	}
 
 	if (n) mdfour_tail(in, n);
@@ -206,11 +179,9 @@ void mdfour(unsigned char *out, unsigned char *in, int n)
 }
 
 #ifdef TEST_MDFOUR
-int protocol_version = 28;
-
 static void file_checksum1(char *fname)
 {
-	int fd, i, was_multiple_of_64 = 1;
+	int fd, i;
 	struct mdfour md;
 	unsigned char buf[64*1024], sum[16];
 	
@@ -224,13 +195,9 @@ static void file_checksum1(char *fname)
 
 	while (1) {
 		int n = read(fd, buf, sizeof(buf));
-		if (n <= 0)
-			break;
-		was_multiple_of_64 = !(n % 64);
+		if (n <= 0) break;
 		mdfour_update(&md, buf, n);
 	}
-	if (was_multiple_of_64 && protocol_version >= 27)
-		mdfour_update(&md, buf, 0);
 
 	close(fd);
 

lib/mdfour.h

@@ -21,12 +21,11 @@
 
 struct mdfour {
 	uint32 A, B, C, D;
-	uint32 totalN;          /* bit count, lower 32 bits */
-	uint32 totalN2;         /* bit count, upper 32 bits */
+	uint32 totalN;
 };
 
 void mdfour_begin(struct mdfour *md);
-void mdfour_update(struct mdfour *md, unsigned char *in, uint32 n);
+void mdfour_update(struct mdfour *md, unsigned char *in, int n);
 void mdfour_result(struct mdfour *md, unsigned char *out);
 void mdfour(unsigned char *out, unsigned char *in, int n);
 

lib/permstring.c

@@ -47,10 +47,8 @@ void permstring(char *perms,
 	if (mode & S_ISGID)
 		perms[6] = (mode & S_IXGRP) ? 's' : 'S';
 	
-#ifdef S_ISVTX
 	if (mode & S_ISVTX)
 		perms[9] = (mode & S_IXOTH) ? 't' : 'T';
-#endif
 		
 	if (S_ISLNK(mode)) perms[0] = 'l';
 	if (S_ISDIR(mode)) perms[0] = 'd';

lib/pool_alloc.3

@@ -1,199 +0,0 @@
-.ds d \-\^\-
-.ds o \fR[\fP
-.ds c \fR]\fP
-.ds | \fR|\fP
-.de D
-\\.B \*d\\$1
-..
-.de DI
-\\.BI \*d\\$1 \\$2
-..
-.de DR
-\\.BR \*d\\$1 \\$2
-..
-.de Di
-\\.BI \*d\\$1 " \\$2"
-..
-.de Db
-\\.B \*d\\$1 " \\$2"
-..
-.de Df
-\\.B \*d\*ono\*c\\$1
-..
-.de See
-See \fB\\$1\fP for details.
-..
-.de SeeIn
-See \fB\\$1\fP in \fB\\$2\fP for details.
-..
-.TH POOL_ALLOC 3
-.SH NAME
-pool_alloc, pool_free, pool_talloc, pool_tfree, pool_create, pool_destroy
-\- Allocate and free memory in managed allocation pools.
-.SH SYNOPSIS
-.B #include "pool_alloc.h"
-
-\fBstruct alloc_pool *pool_create(size_t \fIsize\fB, size_t \fIquantum\fB, void (*\fIbomb\fB)(char *), int \fIflags\fB);
-
-\fBvoid pool_destroy(struct alloc_pool *\fIpool\fB);
-
-\fBvoid *pool_alloc(struct alloc_pool *\fIpool\fB, size_t \fIsize\fB, char *\fImsg\fB);
-
-\fBvoid pool_free(struct alloc_pool *\fIpool\fB, sise_t \fIsize\fB, void *\fIaddr\fB);
-
-\fBvoid *pool_talloc(struct alloc_pool *\fIpool\fB, \fItype\fB), int \fIcount\fB, char *\fImsg\fB);
-
-\fBvoid pool_tfree(struct alloc_pool *\fIpool\fB, \fItype\fB, int \fIcount\fB, void *\fIaddr\fB);
-.SH DESCRIPTION
-.P
-The pool allocation routines use
-.B malloc()
-for underlying memory management.
-What allocation pools do is cause
-memory within a given pool to be in large contigious blocks
-(called extents) that when freed will be reusable.  Unlike
-.B malloc()
-the allocations are not managed individually.
-Instead each extent tracks the total free memory within the
-extent.  Each extent can either be used to allocate memory
-or to manage the freeing of memory within that extent.
-When an extent has less free memory than a given
-allocation request or when the first request to free
-memory within that extent is received the extent ceases to
-be used for allocation.
-.P
-This form of memory management is suited to large numbers of small
-related allocations that are held for a while
-and then freed as a group.
-Because the
-underlying allocations are done in large contigious extents
-when an extent is freed it releases a large enough
-contigious block of memory to be useful to subsequent
-.B malloc()
-and
-.B pool_alloc()
-calls even if allocations from other pools or from
-.B malloc()
-are made between allocations from a given pool.
-.P
-.B pool_create()
-Creates an allocation pool for subsequent calls to the pool
-allocation functions.
-When an extent is created for allocations it will be
-.I size 
-bytes.
-Allocations from the pool have their sizes rounded up to a
-multiple of
-.I quantum
-bytes in length.
-Specifying
-.B 0
-for
-.I quantum
-Will produce a quantum that should meet maximal allignment
-on most platforms.
-If the
-.B POOL_QALIGN
-.I flag
-is set allocations will be aligned to addresses that are a
-multiple of
-.IR quantum .
-If the
-.B POOL_CLEAR
-.I flag
-is set all allocations from the pool will be zero filled.
-.P
-.B pool_destroy()
-destroys an allocation pool and frees all memory allocated
-in that pool.
-.P
-.B pool_alloc()
-allocates
-.I size
-bytes from the specified
-.IR pool .
-If
-.I size
-is
-.B 0
-.I quantum
-bytes will be freed.
-If the requested memory cannot be allocated
-.B pool_alloc()
-will call
-.I bomb()
-function, if defined, with
-.I msg
-as it's sole argument and
-.B NULL
-will be returned.
-.P
-.B pool_free()
-frees
-.I size
-bytes pointed to by
-.I addr
-previously allocated in the specified
-.IR pool .
-The memory freed within an extent will not be reusable until
-all of the memory in that extent has been freed but 
-depending on the order in which the
-allocations are freed some extents may be released for reuse
-while others are still in use.
-If
-.I size
-is
-.B 0
-.I quantum
-bytes will be freed.
-If
-.I addr
-is
-.B 0
-no memory will be freed but subsequent allocations will come
-from a new extent.
-.P
-.B pool_talloc()
-is a macro that take a
-.I type
-and
-.I count
-instead of
-.I size
-and will cast the return value to the correct type.
-.P
-.B pool_tfree
-is a macro to free memory previously allocated in the
-specified
-.IR pool .
-.SH RETURN VALUE
-.B pool_create()
-returns a pointer to
-.BR "struct alloc_pool" .
-.P
-.B pool_alloc()
-and
-.B pool_talloc()
-return pointers to the allocated memory,
-or NULL if the request fails.
-For each extent so long as no allocations are smaller than varaible
-allignment requirements this pointer will be suitably
-alligned for any kind of variable.
-The return type of
-.B pool_alloc()
-will normally require casting to the desired type but
-.B pool_talloc()
-will returns a pointer of the requested
-.IR type .
-.P
-.BR pool_free() ,
-.B pool_tfree()
-and
-.B pool_destroy()
-return no value.
-.SH SEE ALSO
-.nf
-malloc(3)
-.SH AUTHOR
-pool_alloc was created by J.W. Schultz of Pegasystems Technologies.
-.SH BUGS AND ISSUES

lib/pool_alloc.c

@@ -1,304 +0,0 @@
-#include "rsync.h"
-
-#define POOL_DEF_EXTENT	(32 * 1024)
-
-struct alloc_pool
-{
-	size_t			size;		/* extent size		*/
-	size_t			quantum;	/* allocation quantum	*/
-	struct pool_extent	*live;		/* current extent for
-						 * allocations		*/
-	struct pool_extent	*free;		/* unfreed extent list	*/
-	void			(*bomb)();
-						/* function to call if
-						 * malloc fails		*/
-	int			flags;
-
-	/* statistical data */
-	unsigned long		e_created;	/* extents created	*/
-	unsigned long		e_freed;	/* extents detroyed	*/
-	int64			n_allocated;	/* calls to alloc	*/
-	int64			n_freed;	/* calls to free	*/
-	int64			b_allocated;	/* cum. bytes allocated	*/
-	int64			b_freed;	/* cum. bytes freed	*/
-};
-
-struct pool_extent
-{
-	void			*start;		/* starting address	*/
-	size_t			free;		/* free bytecount	*/
-	size_t			bound;		/* bytes bound by padding,
-						 * overhead and freed	*/
-	struct pool_extent	*next;
-};
-
-struct align_test {
-    void *foo;
-    int64 bar;
-};
-
-#define MINALIGN	offsetof(struct align_test, bar)
-
-/* Temporarily cast a void* var into a char* var when adding an offset (to
- * keep some compilers from complaining about the pointer arithmetic). */
-#define PTR_ADD(b,o)	( (void*) ((char*)(b) + (o)) )
-
-alloc_pool_t
-pool_create(size_t size, size_t quantum,
-    void (*bomb)(char *), int flags)
-{
-	struct alloc_pool	*pool;
-
-	if (!(pool = (struct alloc_pool*) malloc(sizeof (struct alloc_pool))))
-		return pool;
-	memset(pool, 0, sizeof (struct alloc_pool));
-
-	pool->size = size	/* round extent size to min alignment reqs */
-	    ? (size + MINALIGN - 1) & ~(MINALIGN - 1)
-	    : POOL_DEF_EXTENT;
-	if (pool->flags & POOL_INTERN)
-	{
-		pool->size -= sizeof (struct pool_extent);
-		flags |= POOL_APPEND;
-	}
-	pool->quantum = quantum ? quantum : MINALIGN;
-	pool->bomb = bomb;
-	pool->flags = flags;
-
-	return pool;
-}
-
-void
-pool_destroy(alloc_pool_t p)
-{
-	struct alloc_pool *pool = (struct alloc_pool *) p;
-	struct pool_extent	*cur, *next;
-
-	if (!pool)
-		return;
-
-	if (pool->live)
-	{
-		cur = pool->live;
-		free(cur->start);
-		if (!(pool->flags & POOL_APPEND))
-			free(cur);
-	}
-	for (cur = pool->free; cur; cur = next)
-	{
-		next = cur->next;
-		free(cur->start);
-		if (!(pool->flags & POOL_APPEND))
-			free(cur);
-	}
-	free(pool);
-}
-
-void *
-pool_alloc(alloc_pool_t p, size_t len, char *bomb)
-{
-	struct alloc_pool *pool = (struct alloc_pool *) p;
-	if (!pool)
-		return NULL;
-
-	if (!len)
-		len = pool->quantum;
-	else if (pool->quantum > 1 && len % pool->quantum)
-		len += pool->quantum - len % pool->quantum;
-
-	if (len > pool->size)
-		goto bomb;
-
-	if (!pool->live || len > pool->live->free)
-	{
-		void	*start;
-		size_t	free;
-		size_t	bound;
-		size_t	sqew;
-		size_t	asize;
-
-		if (pool->live)
-		{
-			pool->live->next = pool->free;
-			pool->free = pool->live;
-		}
-
-		free = pool->size;
-		bound = 0;
-
-		asize = pool->size;
-		if (pool->flags & POOL_APPEND)
-			asize += sizeof (struct pool_extent);
-
-		if (!(start = (void *) malloc(asize)))
-			goto bomb;
-
-		if (pool->flags & POOL_CLEAR)
-			memset(start, 0, pool->size);
-
-		if (pool->flags & POOL_APPEND)
-		{
-			pool->live = PTR_ADD(start, free);
-		}
-		else if (!(pool->live = (struct pool_extent *) malloc(sizeof (struct pool_extent))))
-		{
-			goto bomb;
-		}
-		if (pool->flags & POOL_QALIGN && pool->quantum > 1
-		    && (sqew = (size_t)PTR_ADD(start, free) % pool->quantum))
-		{
-			bound  += sqew;
-			free -= sqew;
-		}
-		pool->live->start = start;
-		pool->live->free = free;
-		pool->live->bound = bound;
-		pool->live->next = NULL;
-
-		pool->e_created++;
-	}
-
-	pool->n_allocated++;
-	pool->b_allocated += len;
-
-	pool->live->free -= len;
-
-	return PTR_ADD(pool->live->start, pool->live->free);
-
-bomb:
-	if (pool->bomb)
-		(*pool->bomb)(bomb);
-	return NULL;
-}
-
-void
-pool_free(alloc_pool_t p, size_t len, void *addr)
-{
-	struct alloc_pool *pool = (struct alloc_pool *) p;
-	struct pool_extent	*cur;
-	struct pool_extent	*prev;
-
-	if (!pool)
-		return;
-
-	if (!len)
-		len = pool->quantum;
-	else if (pool->quantum > 1 && len % pool->quantum)
-		len += pool->quantum - len % pool->quantum;
-
-	if (!addr && pool->live)
-	{
-		pool->live->next = pool->free;
-		pool->free = pool->live;
-		pool->live = NULL;
-		return;
-	}
-	pool->n_freed++;
-	pool->b_freed += len;
-
-	cur = pool->live;
-	if (cur
-	    && addr >= cur->start
-	    && addr < PTR_ADD(cur->start, pool->size))
-	{
-		if (addr == PTR_ADD(cur->start, cur->free))
-		{
-			if (pool->flags & POOL_CLEAR)
-				memset(addr, 0, len);
-			pool->b_freed += len;
-		} else {
-			cur->bound += len;
-		}
-		if (cur->free + cur->bound >= pool->size)
-		{
-			size_t sqew;
-
-			cur->free = pool->size;
-			cur->bound = 0;
-			if (pool->flags & POOL_QALIGN && pool->quantum > 1
-			    && (sqew = (size_t)PTR_ADD(cur->start, cur->free) % pool->quantum))
-			{
-				cur->bound += sqew;
-				cur->free -= sqew;
-			}
-		}
-		return;
-	}
-	for (prev = NULL, cur = pool->free; cur; prev = cur, cur = cur->next)
-	{
-		if (addr >= cur->start
-		    && addr < PTR_ADD(cur->start, pool->size))
-			break;
-	}
-	if (!cur)
-		return;
-
-	if (prev)
-	{
-		prev->next = cur->next;
-		cur->next = pool->free;
-		pool->free = cur;
-	}
-	cur->bound += len;
-
-	if (cur->free + cur->bound >= pool->size)
-	{
-		pool->free = cur->next;
-
-		free(cur->start);
-		if (!(pool->flags & POOL_APPEND))
-			free(cur);
-		pool->e_freed++;
-	}
-	return;
-}
-
-#define FDPRINT(label, value) \
-	snprintf(buf, BUFSIZ, label, value), \
-	write(fd, buf, strlen(buf));
-
-#define FDEXTSTAT(ext) \
-	snprintf(buf, BUFSIZ, "  %12ld  %5ld\n", \
-		(long) ext->free, \
-		(long) ext->bound), \
-	write(fd, buf, strlen(buf))
-
-void
-pool_stats(alloc_pool_t p, int fd, int summarize)
-{
-	struct alloc_pool *pool = (struct alloc_pool *) p;
-	struct pool_extent	*cur;
-	char buf[BUFSIZ];
-
-	if (!pool)
-		return;
-
-	FDPRINT("  Extent size:       %12ld\n",	(long)	pool->size);
-	FDPRINT("  Alloc quantum:     %12ld\n",	(long)	pool->quantum);
-	FDPRINT("  Extents created:   %12ld\n",		pool->e_created);
-	FDPRINT("  Extents freed:     %12ld\n",		pool->e_freed);
-	FDPRINT("  Alloc count:       %12.0f\n", (double) pool->n_allocated);
-	FDPRINT("  Free Count:        %12.0f\n", (double) pool->n_freed);
-	FDPRINT("  Alloc bytes:       %12.0f\n", (double) pool->b_allocated);
-	FDPRINT("  Free bytes:        %12.0f\n", (double) pool->b_freed);
-
-	if (summarize)
-		return;
-
-	if (!pool->live && !pool->free)
-		return;
-
-	write(fd, "\n", 1);
-
-	if (pool->live)
-	{
-		FDEXTSTAT(pool->live);
-	}
-	strcpy(buf, "   FREE    BOUND\n");
-	write(fd, buf, strlen(buf));
-
-	for (cur = pool->free; cur; cur = cur->next)
-	{
-		FDEXTSTAT(cur);
-	}
-}

lib/pool_alloc.h

@@ -1,20 +0,0 @@
-#include <stddef.h>
-
-#define POOL_CLEAR	(1<<0)		/* zero fill allocations	*/
-#define POOL_QALIGN	(1<<1)		/* align data to quanta		*/
-#define POOL_INTERN	(1<<2)		/* Allocate extent structures	*/
-#define POOL_APPEND	(1<<3)		/*   or appended to extent data	*/
-
-typedef void *alloc_pool_t;
-
-alloc_pool_t pool_create(size_t size, size_t quantum, void (*bomb)(char *), int flags);
-void pool_destroy(alloc_pool_t pool);
-void *pool_alloc(alloc_pool_t pool, size_t size, char *bomb);
-void pool_free(alloc_pool_t pool, size_t size, void *addr);
-
-#define pool_talloc(pool, type, count, bomb) \
-	((type *)pool_alloc(pool, sizeof(type) * count, bomb))
-
-#define pool_tfree(pool, type, count, addr) \
-	(pool_free(pool, sizeof(type) * count, addr))
-

lib/snprintf.c

@@ -1,7 +1,3 @@
-/*
- * NOTE: If you change this file, please merge it into rsync, samba, etc.
- */
-
 /*
  * Copyright Patrick Powell 1995
  * This code is based on code written by Patrick Powell (papowell@astart.com)
@@ -57,57 +53,11 @@
  *    got rid of fcvt code (twas buggy and made testing harder)
  *    added C99 semantics
  *
- * date: 2002/12/19 19:56:31;  author: herb;  state: Exp;  lines: +2 -0
- * actually print args for %g and %e
- * 
- * date: 2002/06/03 13:37:52;  author: jmcd;  state: Exp;  lines: +8 -0
- * Since includes.h isn't included here, VA_COPY has to be defined here.  I don't
- * see any include file that is guaranteed to be here, so I'm defining it
- * locally.  Fixes AIX and Solaris builds.
- * 
- * date: 2002/06/03 03:07:24;  author: tridge;  state: Exp;  lines: +5 -13
- * put the ifdef for HAVE_VA_COPY in one place rather than in lots of
- * functions
- * 
- * date: 2002/05/17 14:51:22;  author: jmcd;  state: Exp;  lines: +21 -4
- * Fix usage of va_list passed as an arg.  Use __va_copy before using it
- * when it exists.
- * 
- * date: 2002/04/16 22:38:04;  author: idra;  state: Exp;  lines: +20 -14
- * Fix incorrect zpadlen handling in fmtfp.
- * Thanks to Ollie Oldham <ollie.oldham@metro-optix.com> for spotting it.
- * few mods to make it easier to compile the tests.
- * addedd the "Ollie" test to the floating point ones.
- *
- * Martin Pool (mbp@samba.org) April 2003
- *    Remove NO_CONFIG_H so that the test case can be built within a source
- *    tree with less trouble.
- *    Remove unnecessary SAFE_FREE() definition.
- *
- * Martin Pool (mbp@samba.org) May 2003
- *    Put in a prototype for dummy_snprintf() to quiet compiler warnings.
- *
- *    Move #endif to make sure VA_COPY, LDOUBLE, etc are defined even
- *    if the C library has some snprintf functions already.
  **************************************************************/
 
-#ifndef NO_CONFIG_H
+#ifndef NO_CONFIG_H /* for some tests */
 #include "config.h"
-#else
-#define NULL 0
-#endif 
-
-#ifdef TEST_SNPRINTF /* need math library headers for testing */
-
-/* In test mode, we pretend that this system doesn't have any snprintf
- * functions, regardless of what config.h says. */
-#  undef HAVE_SNPRINTF
-#  undef HAVE_VSNPRINTF
-#  undef HAVE_C99_VSNPRINTF
-#  undef HAVE_ASPRINTF
-#  undef HAVE_VASPRINTF
-#  include <math.h>
-#endif /* TEST_SNPRINTF */
+#endif
 
 #ifdef HAVE_STRING_H
 #include <string.h>
@@ -129,9 +79,8 @@
 /* only include stdio.h if we are not re-defining snprintf or vsnprintf */
 #include <stdio.h>
  /* make the compiler happy with an empty file */
- void dummy_snprintf(void);
  void dummy_snprintf(void) {} 
-#endif /* HAVE_SNPRINTF, etc */
+#else
 
 #ifdef HAVE_LONG_DOUBLE
 #define LDOUBLE long double
@@ -139,22 +88,21 @@
 #define LDOUBLE double
 #endif
 
-#if SIZEOF_LONG_LONG
+#ifdef HAVE_LONG_LONG
 #define LLONG long long
 #else
 #define LLONG long
 #endif
 
-#ifndef VA_COPY
-#ifdef HAVE_VA_COPY
-#define VA_COPY(dest, src) va_copy(dest, src)
-#else
-#ifdef HAVE___VA_COPY
-#define VA_COPY(dest, src) __va_copy(dest, src)
-#else
-#define VA_COPY(dest, src) (dest) = (src)
-#endif
-#endif
+static size_t dopr(char *buffer, size_t maxlen, const char *format, 
+		   va_list args);
+static void fmtstr(char *buffer, size_t *currlen, size_t maxlen,
+		    char *value, int flags, int min, int max);
+static void fmtint(char *buffer, size_t *currlen, size_t maxlen,
+		    long value, int base, int min, int max, int flags);
+static void fmtfp(char *buffer, size_t *currlen, size_t maxlen,
+		   LDOUBLE fvalue, int min, int max, int flags);
+static void dopr_outch(char *buffer, size_t *currlen, size_t maxlen, char c);
 
 /*
  * dopr(): poor man's version of doprintf
@@ -190,20 +138,7 @@
 #define MAX(p,q) (((p) >= (q)) ? (p) : (q))
 #endif
 
-/* yes this really must be a ||. Don't muck with this (tridge) */
-#if !defined(HAVE_VSNPRINTF) || !defined(HAVE_C99_VSNPRINTF)
-
-static size_t dopr(char *buffer, size_t maxlen, const char *format, 
-		   va_list args_in);
-static void fmtstr(char *buffer, size_t *currlen, size_t maxlen,
-		    char *value, int flags, int min, int max);
-static void fmtint(char *buffer, size_t *currlen, size_t maxlen,
-		    long value, int base, int min, int max, int flags);
-static void fmtfp(char *buffer, size_t *currlen, size_t maxlen,
-		   LDOUBLE fvalue, int min, int max, int flags);
-static void dopr_outch(char *buffer, size_t *currlen, size_t maxlen, char c);
-
-static size_t dopr(char *buffer, size_t maxlen, const char *format, va_list args_in)
+static size_t dopr(char *buffer, size_t maxlen, const char *format, va_list args)
 {
 	char ch;
 	LLONG value;
@@ -215,9 +150,6 @@ static size_t dopr(char *buffer, size_t maxlen, const char *format, va_list args
 	int flags;
 	int cflags;
 	size_t currlen;
-	va_list args;
-
-	VA_COPY(args, args_in);
 	
 	state = DP_S_DEFAULT;
 	currlen = flags = cflags = min = 0;
@@ -387,7 +319,6 @@ static size_t dopr(char *buffer, size_t maxlen, const char *format, va_list args
 					fvalue = va_arg (args, LDOUBLE);
 				else
 					fvalue = va_arg (args, double);
-				fmtfp (buffer, &currlen, maxlen, fvalue, min, max, flags);
 				break;
 			case 'G':
 				flags |= DP_F_UP;
@@ -396,14 +327,12 @@ static size_t dopr(char *buffer, size_t maxlen, const char *format, va_list args
 					fvalue = va_arg (args, LDOUBLE);
 				else
 					fvalue = va_arg (args, double);
-				fmtfp (buffer, &currlen, maxlen, fvalue, min, max, flags);
 				break;
 			case 'c':
 				dopr_outch (buffer, &currlen, maxlen, va_arg (args, int));
 				break;
 			case 's':
 				strvalue = va_arg (args, char *);
-				if (!strvalue) strvalue = "(NULL)";
 				if (max == -1) {
 					max = strlen(strvalue);
 				}
@@ -632,26 +561,28 @@ static double my_modf(double x0, double *iptr)
 
 	for (i=0;i<100;i++) {
 		l = (long)x;
-		if (l <= (x+1) && l >= (x-1)) {
-			if (i != 0) {
-				double i2;
-				double ret;
-
-				ret = my_modf(x0-l*f, &i2);
-				(*iptr) = l*f + i2;
-				return ret;
-			} 
-
-			(*iptr) = l;
-			return x - (*iptr);
-		}
+		if (l <= (x+1) && l >= (x-1)) break;
 		x *= 0.1;
 		f *= 10.0;
 	}
 
-	/* yikes! the number is beyond what we can handle. What do we do? */
-	(*iptr) = 0;
-	return 0;
+	if (i == 100) {
+		/* yikes! the number is beyond what we can handle. What do we do? */
+		(*iptr) = 0;
+		return 0;
+	}
+
+	if (i != 0) {
+		double i2;
+		double ret;
+
+		ret = my_modf(x0-l*f, &i2);
+		(*iptr) = l*f + i2;
+		return ret;
+	} 
+
+	(*iptr) = l;
+	return x - (*iptr);
 }
 
 
@@ -667,7 +598,7 @@ static void fmtfp (char *buffer, size_t *currlen, size_t maxlen,
 	int padlen = 0; /* amount to pad */
 	int zpadlen = 0; 
 	int caps = 0;
-	int idx;
+	int index;
 	double intpart;
 	double fracpart;
 	double temp;
@@ -724,13 +655,14 @@ static void fmtfp (char *buffer, size_t *currlen, size_t maxlen,
 
 	/* Convert integer part */
 	do {
-		temp = intpart*0.1;
-		my_modf(temp, &intpart);
-		idx = (int) ((temp -intpart +0.05)* 10.0);
-		/* idx = (int) (((double)(temp*0.1) -intpart +0.05) *10.0); */
-		/* printf ("%llf, %f, %x\n", temp, intpart, idx); */
+		temp = intpart;
+		my_modf(intpart*0.1, &intpart);
+		temp = temp*0.1;
+		index = (int) ((temp -intpart +0.05)* 10.0);
+		/* index = (int) (((double)(temp*0.1) -intpart +0.05) *10.0); */
+		/* printf ("%llf, %f, %x\n", temp, intpart, index); */
 		iconvert[iplace++] =
-			(caps? "0123456789ABCDEF":"0123456789abcdef")[idx];
+			(caps? "0123456789ABCDEF":"0123456789abcdef")[index];
 	} while (intpart && (iplace < 311));
 	if (iplace == 311) iplace--;
 	iconvert[iplace] = 0;
@@ -739,13 +671,14 @@ static void fmtfp (char *buffer, size_t *currlen, size_t maxlen,
 	if (fracpart)
 	{
 		do {
-			temp = fracpart*0.1;
-			my_modf(temp, &fracpart);
-			idx = (int) ((temp -fracpart +0.05)* 10.0);
-			/* idx = (int) ((((temp/10) -fracpart) +0.05) *10); */
-			/* printf ("%lf, %lf, %ld\n", temp, fracpart, idx ); */
+			temp = fracpart;
+			my_modf(fracpart*0.1, &fracpart);
+			temp = temp*0.1;
+			index = (int) ((temp -fracpart +0.05)* 10.0);
+			/* index = (int) ((((temp/10) -fracpart) +0.05) *10); */
+			/* printf ("%lf, %lf, %ld\n", temp, fracpart, index); */
 			fconvert[fplace++] =
-			(caps? "0123456789ABCDEF":"0123456789abcdef")[idx];
+			(caps? "0123456789ABCDEF":"0123456789abcdef")[index];
 		} while(fracpart && (fplace < 311));
 		if (fplace == 311) fplace--;
 	}
@@ -792,14 +725,14 @@ static void fmtfp (char *buffer, size_t *currlen, size_t maxlen,
 	if (max > 0) {
 		dopr_outch (buffer, currlen, maxlen, '.');
 		
-		while (zpadlen > 0) {
-			dopr_outch (buffer, currlen, maxlen, '0');
-			--zpadlen;
-		}
-
 		while (fplace > 0) 
 			dopr_outch (buffer, currlen, maxlen, fconvert[--fplace]);
 	}
+	
+	while (zpadlen > 0) {
+		dopr_outch (buffer, currlen, maxlen, '0');
+		--zpadlen;
+	}
 
 	while (padlen < 0) {
 		dopr_outch (buffer, currlen, maxlen, ' ');
@@ -815,21 +748,15 @@ static void dopr_outch(char *buffer, size_t *currlen, size_t maxlen, char c)
 	(*currlen)++;
 }
 
- int rsync_vsnprintf (char *str, size_t count, const char *fmt, va_list args)
+#if !defined(HAVE_VSNPRINTF) || !defined(HAVE_C99_VSNPRINTF)
+ int vsnprintf (char *str, size_t count, const char *fmt, va_list args)
 {
 	return dopr(str, count, fmt, args);
 }
-#define vsnprintf rsync_vsnprintf
 #endif
 
-/* yes this really must be a ||. Don't muck with this (tridge)
- *
- * The logic for these two is that we need our own definition if the
- * OS *either* has no definition of *sprintf, or if it does have one
- * that doesn't work properly according to the autoconf test.
- */
 #if !defined(HAVE_SNPRINTF) || !defined(HAVE_C99_VSNPRINTF)
-int rsync_snprintf(char *str,size_t count,const char *fmt,...)
+ int snprintf(char *str,size_t count,const char *fmt,...)
 {
 	size_t ret;
 	va_list ap;
@@ -839,7 +766,6 @@ int rsync_snprintf(char *str,size_t count,const char *fmt,...)
 	va_end(ap);
 	return ret;
 }
-#define snprintf rsync_snprintf
 #endif
 
 #endif 
@@ -848,19 +774,13 @@ int rsync_snprintf(char *str,size_t count,const char *fmt,...)
  int vasprintf(char **ptr, const char *format, va_list ap)
 {
 	int ret;
-	va_list ap2;
-
-	VA_COPY(ap2, ap);
 	
-	ret = vsnprintf(NULL, 0, format, ap2);
+	ret = vsnprintf(NULL, 0, format, ap);
 	if (ret <= 0) return ret;
 
 	(*ptr) = (char *)malloc(ret+1);
 	if (!*ptr) return -1;
-
-	VA_COPY(ap2, ap);
-
-	ret = vsnprintf(*ptr, ret+1, format, ap2);
+	ret = vsnprintf(*ptr, ret+1, format, ap);
 
 	return ret;
 }
@@ -873,7 +793,6 @@ int rsync_snprintf(char *str,size_t count,const char *fmt,...)
 	va_list ap;
 	int ret;
 	
-	*ptr = NULL;
 	va_start(ap, format);
 	ret = vasprintf(ptr, format, ap);
 	va_end(ap);
@@ -908,9 +827,8 @@ int rsync_snprintf(char *str,size_t count,const char *fmt,...)
 		"-16.16f",
 		NULL
 	};
-	double fp_nums[] = { 6442452944.1234, -1.5, 134.21, 91340.2, 341.1234, 203.9, 0.96, 0.996, 
-			     0.9996, 1.996, 4.136, 5.030201, 0.00205,
-			     /* END LIST */ 0};
+	double fp_nums[] = { 6442452944.1234, -1.5, 134.21, 91340.2, 341.1234, 0203.9, 0.96, 0.996, 
+			     0.9996, 1.996, 4.136,  0};
 	char *int_fmt[] = {
 		"%-1.5d",
 		"%1.5d",
@@ -1005,10 +923,8 @@ int rsync_snprintf(char *str,size_t count,const char *fmt,...)
 	{
 		double v0 = 0.12345678901234567890123456789012345678901;
 		for (x=0; x<100; x++) {
-			double p = pow(10, x); 
-			double r = v0*p;
-			snprintf(buf1, sizeof(buf1), "%1.1f", r);
-			sprintf(buf2,                "%1.1f", r);
+			snprintf(buf1, sizeof(buf1), "%1.1f", v0*pow(10, x));
+			sprintf(buf2,                "%1.1f", v0*pow(10, x));
 			if (strcmp(buf1, buf2)) {
 				printf("we seem to support %d digits\n", x-1);
 				break;
@@ -1018,4 +934,4 @@ int rsync_snprintf(char *str,size_t count,const char *fmt,...)
 
 	return 0;
 }
-#endif /* TEST_SNPRINTF */
+#endif /* SNPRINTF_TEST */

lib/wildmatch.c

@@ -1,229 +0,0 @@
-/*
-**  Do shell-style pattern matching for ?, \, [], and * characters.
-**  It is 8bit clean.
-**
-**  Written by Rich $alz, mirror!rs, Wed Nov 26 19:03:17 EST 1986.
-**  Rich $alz is now <rsalz@bbn.com>.
-**
-**  Modified by Wayne Davison to special-case '/' matching, to make '**'
-**  work differently than '*', and to fix the character-class code.
-*/
-
-#include "rsync.h"
-
-/* What character marks an inverted character class? */
-#define NEGATE_CLASS	'!'
-#define NEGATE_CLASS2	'^'
-
-#define FALSE 0
-#define TRUE 1
-#define ABORT_ALL -1
-#define ABORT_TO_STARSTAR -2
-
-#define CC_EQ(class, len, litmatch) ((len) == sizeof (litmatch)-1 \
-				    && *(class) == *(litmatch) \
-				    && strncmp((char*)class, litmatch, len) == 0)
-
-#if defined STDC_HEADERS || !defined isascii
-# define ISASCII(c) 1
-#else
-# define ISASCII(c) isascii(c)
-#endif
-
-#ifdef isblank
-# define ISBLANK(c) (ISASCII(c) && isblank(c))
-#else
-# define ISBLANK(c) ((c) == ' ' || (c) == '\t')
-#endif
-
-#ifdef isgraph
-# define ISGRAPH(c) (ISASCII(c) && isgraph(c))
-#else
-# define ISGRAPH(c) (ISASCII(c) && isprint(c) && !isspace(c))
-#endif
-
-#define ISPRINT(c) (ISASCII(c) && isprint(c))
-#define ISDIGIT(c) (ISASCII(c) && isdigit(c))
-#define ISALNUM(c) (ISASCII(c) && isalnum(c))
-#define ISALPHA(c) (ISASCII(c) && isalpha(c))
-#define ISCNTRL(c) (ISASCII(c) && iscntrl(c))
-#define ISLOWER(c) (ISASCII(c) && islower(c))
-#define ISPUNCT(c) (ISASCII(c) && ispunct(c))
-#define ISSPACE(c) (ISASCII(c) && isspace(c))
-#define ISUPPER(c) (ISASCII(c) && isupper(c))
-#define ISXDIGIT(c) (ISASCII(c) && isxdigit(c))
-
-#ifdef WILD_TEST_ITERATIONS
-int wildmatch_iteration_count;
-#endif
-
-static int domatch(const uchar *p, const uchar *text)
-{
-    int matched, special;
-    uchar ch, prev;
-
-#ifdef WILD_TEST_ITERATIONS
-    wildmatch_iteration_count++;
-#endif
-
-    for ( ; (ch = *p) != '\0'; text++, p++) {
-	if (*text == '\0' && ch != '*')
-	    return FALSE;
-	switch (ch) {
-	  case '\\':
-	    /* Literal match with following character.  Note that the test
-	     * in "default" handles the p[1] == '\0' failure case. */
-	    ch = *++p;
-	    /* FALLTHROUGH */
-	  default:
-	    if (*text != ch)
-		return FALSE;
-	    continue;
-	  case '?':
-	    /* Match anything but '/'. */
-	    if (*text == '/')
-		return FALSE;
-	    continue;
-	  case '*':
-	    if (*++p == '*') {
-		while (*++p == '*') {}
-		special = TRUE;
-	    }
-	    else
-		special = FALSE;
-	    if (*p == '\0') {
-		/* Trailing "**" matches everything.  Trailing "*" matches
-		 * only if there are no more slash characters. */
-		return special? TRUE : strchr((char*)text, '/') == NULL;
-	    }
-	    for ( ; *text; text++) {
-		if ((matched = domatch(p, text)) != FALSE) {
-		    if (!special || matched != ABORT_TO_STARSTAR)
-			return matched;
-		}
-		else if (!special && *text == '/')
-		    return ABORT_TO_STARSTAR;
-	    }
-	    return ABORT_ALL;
-	  case '[':
-	    ch = *++p;
-#ifdef NEGATE_CLASS2
-	    if (ch == NEGATE_CLASS2)
-		ch = NEGATE_CLASS;
-#endif
-	    /* Assign literal TRUE/FALSE because of "matched" comparison. */
-	    special = ch == NEGATE_CLASS? TRUE : FALSE;
-	    if (special) {
-		/* Inverted character class. */
-		ch = *++p;
-	    }
-	    prev = 0;
-	    matched = FALSE;
-	    do {
-		if (!ch)
-		    return ABORT_ALL;
-		if (ch == '\\') {
-		    ch = *++p;
-		    if (!ch)
-			return ABORT_ALL;
-		    if (*text == ch)
-			matched = TRUE;
-		}
-		else if (ch == '-' && prev && p[1] && p[1] != ']') {
-		    ch = *++p;
-		    if (ch == '\\') {
-			ch = *++p;
-			if (!ch)
-			    return ABORT_ALL;
-		    }
-		    if (*text <= ch && *text >= prev)
-			matched = TRUE;
-		    ch = 0; /* This makes "prev" get set to 0. */
-		}
-		else if (ch == '[' && p[1] == ':') {
-		    const uchar *s;
-		    int i;
-		    for (s = p += 2; (ch = *p) && ch != ']'; p++) {}
-		    if (!ch)
-			return ABORT_ALL;
-		    i = p - s - 1;
-		    if (i < 0 || p[-1] != ':') {
-			/* Didn't find ":]", so treat like a normal set. */
-			p = s - 2;
-			ch = '[';
-			if (*text == ch)
-			    matched = TRUE;
-			continue;
-		    }
-		    if (CC_EQ(s,i, "alnum")) {
-			if (ISALNUM(*text))
-			    matched = TRUE;
-		    }
-		    else if (CC_EQ(s,i, "alpha")) {
-			if (ISALPHA(*text))
-			    matched = TRUE;
-		    }
-		    else if (CC_EQ(s,i, "blank")) {
-			if (ISBLANK(*text))
-			    matched = TRUE;
-		    }
-		    else if (CC_EQ(s,i, "cntrl")) {
-			if (ISCNTRL(*text))
-			    matched = TRUE;
-		    }
-		    else if (CC_EQ(s,i, "digit")) {
-			if (ISDIGIT(*text))
-			    matched = TRUE;
-		    }
-		    else if (CC_EQ(s,i, "graph")) {
-			if (ISGRAPH(*text))
-			    matched = TRUE;
-		    }
-		    else if (CC_EQ(s,i, "lower")) {
-			if (ISLOWER(*text))
-			    matched = TRUE;
-		    }
-		    else if (CC_EQ(s,i, "print")) {
-			if (ISPRINT(*text))
-			    matched = TRUE;
-		    }
-		    else if (CC_EQ(s,i, "punct")) {
-			if (ISPUNCT(*text))
-			    matched = TRUE;
-		    }
-		    else if (CC_EQ(s,i, "space")) {
-			if (ISSPACE(*text))
-			    matched = TRUE;
-		    }
-		    else if (CC_EQ(s,i, "upper")) {
-			if (ISUPPER(*text))
-			    matched = TRUE;
-		    }
-		    else if (CC_EQ(s,i, "xdigit")) {
-			if (ISXDIGIT(*text))
-			    matched = TRUE;
-		    }
-		    else /* malformed [:class:] string */
-			return ABORT_ALL;
-		    ch = 0; /* This makes "prev" get set to 0. */
-		}
-		else if (*text == ch)
-		    matched = TRUE;
-	    } while (prev = ch, (ch = *++p) != ']');
-	    if (matched == special || *text == '/')
-		return FALSE;
-	    continue;
-	}
-    }
-
-    return *text == '\0';
-}
-
-/* Find the pattern (p) in the text string (t). */
-int wildmatch(const char *p, const char *t)
-{
-#ifdef WILD_TEST_ITERATIONS
-    wildmatch_iteration_count = 0;
-#endif
-    return domatch((const uchar*)p, (const uchar*)t) == TRUE;
-}

lib/wildmatch.h

@@ -1,3 +0,0 @@
-/* wildmatch.h */
-
-int wildmatch(const char *p, const char *text);

loadparm.c

@@ -3,20 +3,20 @@
 
 /* some fixes
  *
- * Copyright (C) 2001, 2002 by Martin Pool <mbp@samba.org>
+ * Copyright (C) 2001 by Martin Pool <mbp@samba.org>
  */
 
-/*
+/* 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
-
+   
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
+   
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
@@ -36,7 +36,7 @@
  * 3) add it to the list of available functions (eg: using FN_GLOBAL_STRING())
  * 4) If it's a global then initialise it in init_globals. If a local
  *    (ie. service) parameter then initialise it in the sDefault structure
- *
+ *  
  *
  * Notes:
  *   The configuration file is processed sequentially for speed. It is NOT
@@ -48,8 +48,6 @@
  *
  */
 
-/* TODO: Parameter to set debug level on server. */
-
 #include "rsync.h"
 #define PTR_DIFF(p1,p2) ((ptrdiff_t)(((char *)(p1)) - (char *)(p2)))
 #define strequal(a,b) (strcasecmp(a,b)==0)
@@ -61,7 +59,7 @@ typedef char pstring[1024];
 typedef enum
 {
 	P_BOOL,P_BOOLREV,P_CHAR,P_INTEGER,P_OCTAL,
-	P_PATH,P_STRING,P_GSTRING,P_ENUM,P_SEP
+	P_STRING,P_GSTRING,P_ENUM,P_SEP
 } parm_type;
 
 typedef enum
@@ -93,7 +91,7 @@ struct parm_struct
 #define iSERVICE(i) (*pSERVICE(i))
 #define LP_SNUM_OK(iService) (((iService) >= 0) && ((iService) < iNumServices))
 
-/*
+/* 
  * This structure describes global (ie., server-wide) parameters.
  */
 typedef struct
@@ -101,18 +99,16 @@ typedef struct
 	char *motd_file;
 	char *log_file;
 	char *pid_file;
-	char *socket_options;
-	char *bind_address;
 	int syslog_facility;
-	int max_verbosity;
-	int rsync_port;
+	char *socket_options;
 } global;
 
 static global Globals;
 
 
-/*
- * This structure describes a single service.
+
+/* 
+ * This structure describes a single service. 
  */
 typedef struct
 {
@@ -121,7 +117,6 @@ typedef struct
 	char *comment;
 	char *lock_file;
 	BOOL read_only;
-	BOOL write_only;
 	BOOL list;
 	BOOL use_chroot;
 	BOOL transfer_logging;
@@ -133,7 +128,6 @@ typedef struct
 	char *auth_users;
 	char *secrets_file;
 	BOOL strict_modes;
-	char *filter;
 	char *exclude;
 	char *exclude_from;
 	char *include;
@@ -148,35 +142,24 @@ typedef struct
 
 
 /* This is a default service used to prime a services structure */
-static service sDefault =
+static service sDefault = 
 {
 	NULL,    /* name */
 	NULL,    /* path */
 	NULL,    /* comment */
 	DEFAULT_LOCK_FILE,    /* lock file */
 	True,    /* read only */
-	False,   /* write only */
 	True,    /* list */
 	True,    /* use chroot */
 	False,   /* transfer logging */
 	False,   /* ignore errors */
 	"nobody",/* uid */
-
-	/* TODO: This causes problems on Debian, where it is called
-	 * "nogroup".  Debian patch this in their version of the
-	 * package, but it would be nice to be consistent.  Possibly
-	 * other systems are different again.
-	 *
-	 * What is the best behaviour?  Perhaps always using (gid_t)
-	 * -2? */
 	"nobody",/* gid */
-
 	NULL,    /* hosts allow */
 	NULL,    /* hosts deny */
 	NULL,    /* auth users */
 	NULL,    /* secrets file */
 	True,   /* strict modes */
-	NULL,    /* filter */
 	NULL,    /* exclude */
 	NULL,    /* exclude from */
 	NULL,    /* include */
@@ -228,7 +211,7 @@ static struct enum_list enum_facilities[] = {
 	{ LOG_NEWS, "news" },
 #endif
 #ifdef LOG_AUTH
-	{ LOG_AUTH, "security" },
+	{ LOG_AUTH, "security" },		
 #endif
 #ifdef LOG_SYSLOG
 	{ LOG_SYSLOG, "syslog" },
@@ -274,18 +257,14 @@ static struct parm_struct parm_table[] =
   {"socket options",   P_STRING,  P_GLOBAL, &Globals.socket_options,NULL,  0},
   {"log file",         P_STRING,  P_GLOBAL, &Globals.log_file,      NULL,  0},
   {"pid file",         P_STRING,  P_GLOBAL, &Globals.pid_file,      NULL,  0},
-  {"max verbosity",    P_INTEGER, P_GLOBAL, &Globals.max_verbosity, NULL,  0},
-  {"port",             P_INTEGER, P_GLOBAL, &Globals.rsync_port,    NULL,  0},
-  {"address",          P_STRING,  P_GLOBAL, &Globals.bind_address,  NULL,  0},
 
   {"timeout",          P_INTEGER, P_LOCAL,  &sDefault.timeout,     NULL,  0},
   {"max connections",  P_INTEGER, P_LOCAL,  &sDefault.max_connections,NULL, 0},
   {"name",             P_STRING,  P_LOCAL,  &sDefault.name,        NULL,   0},
   {"comment",          P_STRING,  P_LOCAL,  &sDefault.comment,     NULL,   0},
   {"lock file",        P_STRING,  P_LOCAL,  &sDefault.lock_file,   NULL,   0},
-  {"path",             P_PATH,    P_LOCAL,  &sDefault.path,        NULL,   0},
+  {"path",             P_STRING,  P_LOCAL,  &sDefault.path,        NULL,   0},
   {"read only",        P_BOOL,    P_LOCAL,  &sDefault.read_only,   NULL,   0},
-  {"write only",       P_BOOL,    P_LOCAL,  &sDefault.write_only,  NULL,   0},
   {"list",             P_BOOL,    P_LOCAL,  &sDefault.list,        NULL,   0},
   {"use chroot",       P_BOOL,    P_LOCAL,  &sDefault.use_chroot,  NULL,   0},
   {"ignore nonreadable",P_BOOL,   P_LOCAL,  &sDefault.ignore_nonreadable,  NULL,   0},
@@ -296,7 +275,6 @@ static struct parm_struct parm_table[] =
   {"auth users",       P_STRING,  P_LOCAL,  &sDefault.auth_users,  NULL,   0},
   {"secrets file",     P_STRING,  P_LOCAL,  &sDefault.secrets_file,NULL,   0},
   {"strict modes",     P_BOOL,    P_LOCAL,  &sDefault.strict_modes,NULL,   0},
-  {"filter",           P_STRING,  P_LOCAL,  &sDefault.filter,      NULL,   0},
   {"exclude",          P_STRING,  P_LOCAL,  &sDefault.exclude,     NULL,   0},
   {"exclude from",     P_STRING,  P_LOCAL,  &sDefault.exclude_from,NULL,   0},
   {"include",          P_STRING,  P_LOCAL,  &sDefault.include,     NULL,   0},
@@ -315,11 +293,10 @@ Initialise the global parameter structure.
 ***************************************************************************/
 static void init_globals(void)
 {
-	memset(&Globals, 0, sizeof Globals);
+	memset(&Globals, 0, sizeof(Globals));
 #ifdef LOG_DAEMON
 	Globals.syslog_facility = LOG_DAEMON;
 #endif
-	Globals.max_verbosity = 1;
 }
 
 /***************************************************************************
@@ -331,8 +308,8 @@ static void init_locals(void)
 
 
 /*
-   In this section all the functions that are used to access the
-   parameters from the rest of the program are defined
+   In this section all the functions that are used to access the 
+   parameters from the rest of the program are defined 
 */
 
 #define FN_GLOBAL_STRING(fn_name,ptr) \
@@ -359,16 +336,12 @@ FN_GLOBAL_STRING(lp_log_file, &Globals.log_file)
 FN_GLOBAL_STRING(lp_pid_file, &Globals.pid_file)
 FN_GLOBAL_STRING(lp_socket_options, &Globals.socket_options)
 FN_GLOBAL_INTEGER(lp_syslog_facility, &Globals.syslog_facility)
-FN_GLOBAL_INTEGER(lp_max_verbosity, &Globals.max_verbosity)
-FN_GLOBAL_INTEGER(lp_rsync_port, &Globals.rsync_port)
-FN_GLOBAL_STRING(lp_bind_address, &Globals.bind_address)
 
 FN_LOCAL_STRING(lp_name, name)
 FN_LOCAL_STRING(lp_comment, comment)
 FN_LOCAL_STRING(lp_path, path)
 FN_LOCAL_STRING(lp_lock_file, lock_file)
 FN_LOCAL_BOOL(lp_read_only, read_only)
-FN_LOCAL_BOOL(lp_write_only, write_only)
 FN_LOCAL_BOOL(lp_list, list)
 FN_LOCAL_BOOL(lp_use_chroot, use_chroot)
 FN_LOCAL_BOOL(lp_transfer_logging, transfer_logging)
@@ -381,7 +354,6 @@ FN_LOCAL_STRING(lp_hosts_deny, hosts_deny)
 FN_LOCAL_STRING(lp_auth_users, auth_users)
 FN_LOCAL_STRING(lp_secrets_file, secrets_file)
 FN_LOCAL_BOOL(lp_strict_modes, strict_modes)
-FN_LOCAL_STRING(lp_filter, filter)
 FN_LOCAL_STRING(lp_exclude, exclude)
 FN_LOCAL_STRING(lp_exclude_from, exclude_from)
 FN_LOCAL_STRING(lp_include, include)
@@ -393,11 +365,12 @@ FN_LOCAL_INTEGER(lp_timeout, timeout)
 FN_LOCAL_INTEGER(lp_max_connections, max_connections)
 
 /* local prototypes */
-static int    strwicmp(char *psz1, char *psz2);
-static int    map_parameter(char *parmname);
-static BOOL   set_boolean(BOOL *pb, char *parmvalue);
+static int    strwicmp( char *psz1, char *psz2 );
+static int    map_parameter( char *parmname);
+static BOOL   set_boolean( BOOL *pb, char *parmvalue );
 static int    getservicebyname(char *name, service *pserviceDest);
-static void   copy_service(service *pserviceDest, service *pserviceSource);
+static void   copy_service( service *pserviceDest, 
+                            service *pserviceSource);
 static BOOL   do_parameter(char *parmname, char *parmvalue);
 static BOOL   do_section(char *sectionname);
 
@@ -437,7 +410,7 @@ static void string_set(char **s, const char *v)
 
 
 /***************************************************************************
-add a new service to the services array initialising it with the given
+add a new service to the services array initialising it with the given 
 service
 ***************************************************************************/
 static int add_a_service(service *pservice, char *name)
@@ -449,7 +422,7 @@ static int add_a_service(service *pservice, char *name)
   tservice = *pservice;
 
   /* it might already exist */
-  if (name)
+  if (name) 
     {
       i = getservicebyname(name,NULL);
       if (i >= 0)
@@ -458,10 +431,10 @@ static int add_a_service(service *pservice, char *name)
 
   i = iNumServices;
 
-  ServicePtrs = realloc_array(ServicePtrs, service *, num_to_alloc);
+  ServicePtrs = (service **)Realloc(ServicePtrs,sizeof(service *)*num_to_alloc);
 
   if (ServicePtrs)
-	  pSERVICE(iNumServices) = new(service);
+	  pSERVICE(iNumServices) = (service *)malloc(sizeof(service));
 
   if (!ServicePtrs || !pSERVICE(iNumServices))
 	  return(-1);
@@ -471,7 +444,7 @@ static int add_a_service(service *pservice, char *name)
   init_service(pSERVICE(i));
   copy_service(pSERVICE(i),&tservice);
   if (name)
-    string_set(&iSERVICE(i).name,name);
+    string_set(&iSERVICE(i).name,name);  
 
   return(i);
 }
@@ -495,12 +468,11 @@ static int strwicmp(char *psz1, char *psz2)
    /* sync the strings on first non-whitespace */
    while (1)
    {
-      while (isspace(* (unsigned char *) psz1))
+      while (isspace(*psz1))
          psz1++;
-      while (isspace(* (unsigned char *) psz2))
+      while (isspace(*psz2))
          psz2++;
-      if (toupper(* (unsigned char *) psz1) != toupper(* (unsigned char *) psz2)
-	  || *psz1 == '\0' || *psz2 == '\0')
+      if (toupper(*psz1) != toupper(*psz2) || *psz1 == '\0' || *psz2 == '\0')
          break;
       psz1++;
       psz2++;
@@ -509,7 +481,7 @@ static int strwicmp(char *psz1, char *psz2)
 }
 
 /***************************************************************************
-Map a parameter's string representation to something we can use.
+Map a parameter's string representation to something we can use. 
 Returns False if the parameter string is not recognised, else TRUE.
 ***************************************************************************/
 static int map_parameter(char *parmname)
@@ -519,7 +491,7 @@ static int map_parameter(char *parmname)
    if (*parmname == '-')
      return(-1);
 
-   for (iIndex = 0; parm_table[iIndex].label; iIndex++)
+   for (iIndex = 0; parm_table[iIndex].label; iIndex++) 
       if (strwicmp(parm_table[iIndex].label, parmname) == 0)
          return(iIndex);
 
@@ -530,7 +502,7 @@ static int map_parameter(char *parmname)
 
 /***************************************************************************
 Set a boolean variable from the text value stored in the passed string.
-Returns True in success, False if the passed string does not correctly
+Returns True in success, False if the passed string does not correctly 
 represent a boolean.
 ***************************************************************************/
 static BOOL set_boolean(BOOL *pb, char *parmvalue)
@@ -564,7 +536,7 @@ static int getservicebyname(char *name, service *pserviceDest)
    int iService;
 
    for (iService = iNumServices - 1; iService >= 0; iService--)
-      if (strwicmp(iSERVICE(iService).name, name) == 0)
+      if (strwicmp(iSERVICE(iService).name, name) == 0) 
       {
          if (pserviceDest != NULL)
 	   copy_service(pserviceDest, pSERVICE(iService));
@@ -580,7 +552,7 @@ static int getservicebyname(char *name, service *pserviceDest)
 Copy a service structure to another
 
 ***************************************************************************/
-static void copy_service(service *pserviceDest,
+static void copy_service(service *pserviceDest, 
                          service *pserviceSource)
 {
   int i;
@@ -588,9 +560,9 @@ static void copy_service(service *pserviceDest,
   for (i=0;parm_table[i].label;i++)
     if (parm_table[i].ptr && parm_table[i].class == P_LOCAL) {
 	void *def_ptr = parm_table[i].ptr;
-	void *src_ptr =
+	void *src_ptr = 
 	  ((char *)pserviceSource) + PTR_DIFF(def_ptr,&sDefault);
-	void *dest_ptr =
+	void *dest_ptr = 
 	  ((char *)pserviceDest) + PTR_DIFF(def_ptr,&sDefault);
 
 	switch (parm_table[i].type)
@@ -610,7 +582,6 @@ static void copy_service(service *pserviceDest,
 	    *(char *)dest_ptr = *(char *)src_ptr;
 	    break;
 
-	  case P_PATH:
 	  case P_STRING:
 	    string_set(dest_ptr,*(char **)src_ptr);
 	    break;
@@ -631,7 +602,6 @@ static BOOL lp_do_parameter(int snum, char *parmname, char *parmvalue)
    int parmnum, i;
    void *parm_ptr=NULL; /* where we are going to store the result */
    void *def_ptr=NULL;
-   char *cp;
 
    parmnum = map_parameter(parmname);
 
@@ -678,15 +648,6 @@ static BOOL lp_do_parameter(int snum, char *parmname, char *parmvalue)
        sscanf(parmvalue,"%o",(int *)parm_ptr);
        break;
 
-     case P_PATH:
-       string_set(parm_ptr,parmvalue);
-       if ((cp = *(char**)parm_ptr) != NULL) {
-	   int len = strlen(cp);
-	   while (len > 1 && cp[len-1] == '/') len--;
-	   cp[len] = '\0';
-       }
-       break;
-
      case P_STRING:
        string_set(parm_ptr,parmvalue);
        break;
@@ -738,7 +699,7 @@ static BOOL do_section(char *sectionname)
      init_locals();
 
    /* if we've just struck a global section, note the fact. */
-   bInGlobalSection = isglobal;
+   bInGlobalSection = isglobal;   
 
    /* check for multiple global sections */
    if (bInGlobalSection)
@@ -770,34 +731,26 @@ static BOOL do_section(char *sectionname)
 
 
 /***************************************************************************
-Load the services array from the services file. Return True on success,
+Load the services array from the services file. Return True on success, 
 False on failure.
 ***************************************************************************/
 BOOL lp_load(char *pszFname, int globals_only)
 {
-	extern int am_server;
-	extern int am_daemon;
-	extern int am_root;
 	pstring n2;
 	BOOL bRetval;
-
+ 
 	bRetval = False;
 
 	bInGlobalSection = True;
-
+  
 	init_globals();
 
-	if (pszFname)
-	    pstrcpy(n2,pszFname);
-	else if (am_server && am_daemon && !am_root)
-	    pstrcpy(n2,RSYNCD_USERCONF);
-	else
-	    pstrcpy(n2,RSYNCD_SYSCONF);
+	pstrcpy(n2,pszFname);
 
 	/* We get sections first, so have to start 'behind' to make up */
 	iServiceIndex = -1;
 	bRetval = pm_process(n2, globals_only?NULL:do_section, do_parameter);
-
+  
 	return (bRetval);
 }
 
@@ -821,7 +774,7 @@ int lp_number(char *name)
    int iService;
 
    for (iService = iNumServices - 1; iService >= 0; iService--)
-      if (strcmp(lp_name(iService), name) == 0)
+      if (strequal(lp_name(iService), name)) 
          break;
 
    return (iService);

log.c

@@ -1,106 +1,35 @@
-/* -*- c-file-style: "linux"; -*-
-
-   Copyright (C) 1998-2001 by Andrew Tridgell <tridge@samba.org>
-   Copyright (C) 2000-2001 by Martin Pool <mbp@samba.org>
-
+/* 
+   Copyright (C) Andrew Tridgell 1998
+   
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
-
+   
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
+   
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
 /*
-  Logging and utility functions.
-  tridge, May 1998
+  logging and utility functions
 
-  Mapping to human-readable messages added by Martin Pool
-  <mbp@samba.org>, Oct 2000.
+  tridge, May 1998
   */
 #include "rsync.h"
 
-extern int verbose;
-extern int dry_run;
-extern int am_daemon;
-extern int am_server;
-extern int am_sender;
-extern int local_server;
-extern int quiet;
-extern int module_id;
-extern int msg_fd_out;
-extern int protocol_version;
-extern int preserve_times;
-extern int log_format_has_o_or_i;
-extern int daemon_log_format_has_o_or_i;
-extern char *auth_user;
-extern char *log_format;
-
-static int log_initialised;
-static int logfile_was_closed;
-static char *logfname;
 static FILE *logfile;
-struct stats stats;
-
-int log_got_error = 0;
-
-struct {
-        int code;
-        char const *name;
-} const rerr_names[] = {
-	{ RERR_SYNTAX     , "syntax or usage error" },
-	{ RERR_PROTOCOL   , "protocol incompatibility" },
-	{ RERR_FILESELECT , "errors selecting input/output files, dirs" },
-	{ RERR_UNSUPPORTED, "requested action not supported" },
-	{ RERR_STARTCLIENT, "error starting client-server protocol" },
-	{ RERR_SOCKETIO   , "error in socket IO" },
-	{ RERR_FILEIO     , "error in file IO" },
-	{ RERR_STREAMIO   , "error in rsync protocol data stream" },
-	{ RERR_MESSAGEIO  , "errors with program diagnostics" },
-	{ RERR_IPC        , "error in IPC code" },
-	{ RERR_SIGNAL     , "received SIGUSR1 or SIGINT" },
-	{ RERR_WAITCHILD  , "some error returned by waitpid()" },
-	{ RERR_MALLOC     , "error allocating core memory buffers" },
-	{ RERR_PARTIAL    , "some files could not be transferred" },
-	{ RERR_VANISHED   , "some files vanished before they could be transferred" },
-	{ RERR_TIMEOUT    , "timeout in data send/receive" },
-	{ RERR_CMD_FAILED , "remote shell failed" },
-	{ RERR_CMD_KILLED , "remote shell killed" },
-	{ RERR_CMD_RUN    , "remote command could not be run" },
-	{ RERR_CMD_NOTFOUND,"remote command not found" },
-	{ RERR_DEL_LIMIT  , "the --max-delete limit stopped deletions" },
-	{ 0, NULL }
-};
-
-
-
-/*
- * Map from rsync error code to name, or return NULL.
- */
-static char const *rerr_name(int code)
-{
-	int i;
-	for (i = 0; rerr_names[i].name; i++) {
-		if (rerr_names[i].code == code)
-			return rerr_names[i].name;
-	}
-	return NULL;
-}
-
+static int log_error_fd = -1;
 
 static void logit(int priority, char *buf)
 {
-	if (logfile_was_closed)
-		logfile_reopen();
 	if (logfile) {
-		fprintf(logfile,"%s [%d] %s",
+		fprintf(logfile,"%s [%d] %s", 
 			timestring(time(NULL)), (int)getpid(), buf);
 		fflush(logfile);
 	} else {
@@ -108,14 +37,31 @@ static void logit(int priority, char *buf)
 	}
 }
 
-static void syslog_init()
+void log_open(void)
 {
-	static int been_here = 0;
+	static int initialised;
 	int options = LOG_PID;
+	time_t t;
+	char *logf;
 
-	if (been_here)
+	if (initialised) return;
+	initialised = 1;
+
+	/* this looks pointless, but it is needed in order for the
+	   C library on some systems to fetch the timezone info
+	   before the chroot */
+	t = time(NULL);
+	localtime(&t);
+
+	/* optionally use a log file instead of syslog */
+	logf = lp_log_file();
+	if (logf && *logf) {
+		extern int orig_umask;
+		int old_umask = umask(022 | orig_umask);
+		logfile = fopen(logf, "a");
+		umask(old_umask);
 		return;
-	been_here = 1;
+	}
 
 #ifdef LOG_NDELAY
 	options |= LOG_NDELAY;
@@ -128,233 +74,123 @@ static void syslog_init()
 #endif
 
 #ifndef LOG_NDELAY
-	logit(LOG_INFO, "rsyncd started\n");
+	logit(LOG_INFO,"rsyncd started\n");
 #endif
 }
 
-static void logfile_open(void)
+/* setup the error file descriptor - used when we are a server
+   that is receiving files */
+void set_error_fd(int fd)
 {
-	extern int orig_umask;
-	int old_umask = umask(022 | orig_umask);
-	logfile = fopen(logfname, "a");
-	umask(old_umask);
-	if (!logfile) {
-		int fopen_errno = errno;
-		/* Rsync falls back to using syslog on failure. */
-		syslog_init();
-		rsyserr(FERROR, fopen_errno,
-			"failed to open log-file %s", logfname);
-		rprintf(FINFO, "Ignoring \"log file\" setting.\n");
-	}
-}
-
-void log_init(void)
-{
-	time_t t;
-
-	if (log_initialised)
-		return;
-	log_initialised = 1;
-
-	/* this looks pointless, but it is needed in order for the
-	 * C library on some systems to fetch the timezone info
-	 * before the chroot */
-	t = time(NULL);
-	localtime(&t);
-
-	/* optionally use a log file instead of syslog */
-	logfname = lp_log_file();
-	if (logfname && *logfname)
-		logfile_open();
-	else
-		syslog_init();
-}
-
-void logfile_close(void)
-{
-	if (logfile) {
-		logfile_was_closed = 1;
-		fclose(logfile);
-		logfile = NULL;
-	}
-}
-
-void logfile_reopen(void)
-{
-	if (logfile_was_closed) {
-		logfile_was_closed = 0;
-		logfile_open();
-	}
+	log_error_fd = fd;
 }
 
 /* this is the underlying (unformatted) rsync debugging function. Call
- * it with FINFO, FERROR or FLOG */
+   it with FINFO, FERROR or FLOG */
 void rwrite(enum logcode code, char *buf, int len)
 {
-	FILE *f = NULL;
+	FILE *f=NULL;
+	extern int am_daemon;
+	extern int am_server;
+	extern int quiet;
 	/* recursion can happen with certain fatal conditions */
 
-	if (quiet && code == FINFO)
-		return;
+	if (quiet && code == FINFO) return;
 
-	if (len < 0)
-		exit_cleanup(RERR_MESSAGEIO);
+	if (len < 0) exit_cleanup(RERR_MESSAGEIO);
 
 	buf[len] = 0;
 
-	if (am_server && msg_fd_out >= 0) {
-		/* Pass the message to our sibling. */
-		send_msg((enum msgcode)code, buf, len);
+	if (code == FLOG) {
+		if (am_daemon) logit(LOG_INFO, buf);
 		return;
 	}
 
-	if (code == FCLIENT)
-		code = FINFO;
-	else if (am_daemon) {
-		static int in_block;
-		char msg[2048];
-		int priority = code == FERROR ? LOG_WARNING : LOG_INFO;
-
-		if (in_block)
-			return;
-		in_block = 1;
-		if (!log_initialised)
-			log_init();
-		strlcpy(msg, buf, MIN((int)sizeof msg, len + 1));
-		logit(priority, msg);
-		in_block = 0;
-
-		if (code == FLOG || !am_server)
-			return;
-	} else if (code == FLOG)
+	/* first try to pass it off the our sibling */
+	if (am_server && io_error_write(log_error_fd, code, buf, len)) {
 		return;
+	}
 
-	if (am_server) {
-		/* Pass the message to the non-server side. */
-		if (io_multiplex_write((enum msgcode)code, buf, len))
-			return;
-		if (am_daemon) {
-			/* TODO: can we send the error to the user somehow? */
-			return;
-		}
+	/* then try to pass it to the other end */
+	if (am_server && io_multiplex_write(code, buf, len)) {
+		return;
+	}
+
+	if (am_daemon) {
+		static int depth;
+		int priority = LOG_INFO;
+		if (code == FERROR) priority = LOG_WARNING;
+
+		if (depth) return;
+
+		depth++;
+
+		log_open();
+		logit(priority, buf);
+
+		depth--;
+		return;
 	}
 
 	if (code == FERROR) {
-		log_got_error = 1;
 		f = stderr;
-	}
+	} 
 
-	if (code == FINFO)
-		f = am_server ? stderr : stdout;
+	if (code == FINFO) {
+		if (am_server) 
+			f = stderr;
+		else
+			f = stdout;
+	} 
 
-	if (!f)
-		exit_cleanup(RERR_MESSAGEIO);
+	if (!f) exit_cleanup(RERR_MESSAGEIO);
 
-	if (fwrite(buf, len, 1, f) != 1)
-		exit_cleanup(RERR_MESSAGEIO);
+	if (fwrite(buf, len, 1, f) != 1) exit_cleanup(RERR_MESSAGEIO);
 
-	if (buf[len-1] == '\r' || buf[len-1] == '\n')
-		fflush(f);
+	if (buf[len-1] == '\r' || buf[len-1] == '\n') fflush(f);
 }
+		
 
-
-/* This is the rsync debugging function. Call it with FINFO, FERROR or
- * FLOG. */
-void rprintf(enum logcode code, const char *format, ...)
+/* this is the rsync debugging function. Call it with FINFO, FERROR or FLOG */
+ void rprintf(enum logcode code, const char *format, ...)
 {
-	va_list ap;
-	char buf[MAXPATHLEN+512];
-	size_t len;
+	va_list ap;  
+	char buf[1024];
+	int len;
 
 	va_start(ap, format);
-	len = vsnprintf(buf, sizeof buf, format, ap);
+	len = vslprintf(buf, sizeof(buf), format, ap);
 	va_end(ap);
 
-	/* Deal with buffer overruns.  Instead of panicking, just
-	 * truncate the resulting string.  (Note that configure ensures
-	 * that we have a vsnprintf() that doesn't ever return -1.) */
-	if (len > sizeof buf - 1) {
-		const char ellipsis[] = "[...]";
-
-		/* Reset length, and zero-terminate the end of our buffer */
-		len = sizeof buf - 1;
-		buf[len] = '\0';
-
-		/* Copy the ellipsis to the end of the string, but give
-		 * us one extra character:
-		 *
-		 *                  v--- null byte at buf[sizeof buf - 1]
-		 *        abcdefghij0
-		 *     -> abcd[...]00  <-- now two null bytes at end
-		 *
-		 * If the input format string has a trailing newline,
-		 * we copy it into that extra null; if it doesn't, well,
-		 * all we lose is one byte.  */
-		strncpy(buf+len-sizeof ellipsis, ellipsis, sizeof ellipsis);
-		if (format[strlen(format)-1] == '\n') {
-			buf[len-1] = '\n';
-		}
-	}
+	if (len > sizeof(buf)-1) exit_cleanup(RERR_MESSAGEIO);
 
 	rwrite(code, buf, len);
 }
 
-
-/* This is like rprintf, but it also tries to print some
- * representation of the error code.  Normally errcode = errno.
- *
- * Unlike rprintf, this always adds a newline and there should not be
- * one in the format string.
- *
- * Note that since strerror might involve dynamically loading a
- * message catalog we need to call it once before chroot-ing. */
-void rsyserr(enum logcode code, int errcode, const char *format, ...)
-{
-	va_list ap;
-	char buf[MAXPATHLEN+512];
-	size_t len;
-
-	strcpy(buf, RSYNC_NAME ": ");
-	len = (sizeof RSYNC_NAME ": ") - 1;
-
-	va_start(ap, format);
-	len += vsnprintf(buf + len, sizeof buf - len, format, ap);
-	va_end(ap);
-
-	if (len < sizeof buf) {
-		len += snprintf(buf + len, sizeof buf - len,
-				": %s (%d)\n", strerror(errcode), errcode);
-	}
-	if (len >= sizeof buf)
-		exit_cleanup(RERR_MESSAGEIO);
-
-	rwrite(code, buf, len);
-}
-
-
-
 void rflush(enum logcode code)
 {
 	FILE *f = NULL;
-
+	extern int am_daemon;
+	
 	if (am_daemon) {
 		return;
 	}
 
 	if (code == FLOG) {
 		return;
-	}
+	} 
 
 	if (code == FERROR) {
 		f = stderr;
-	}
+	} 
 
 	if (code == FINFO) {
-		if (am_server)
+		extern int am_server;
+		if (am_server) 
 			f = stderr;
 		else
 			f = stdout;
-	}
+	} 
 
 	if (!f) exit_cleanup(RERR_MESSAGEIO);
 	fflush(f);
@@ -363,310 +199,156 @@ void rflush(enum logcode code)
 
 
 /* a generic logging routine for send/recv, with parameter
- * substitiution */
-static void log_formatted(enum logcode code, char *format, char *op,
-			  struct file_struct *file, struct stats *initial_stats,
-			  int iflags, char *hlink)
+   substitiution */
+static void log_formatted(enum logcode code,
+			  char *format, char *op, struct file_struct *file,
+			  struct stats *initial_stats)
 {
-	char buf[MAXPATHLEN+1024], buf2[MAXPATHLEN], fmt[32];
+	extern int module_id;
+	extern char *auth_user;
+	char buf[1024];
+	char buf2[1024];
 	char *p, *s, *n;
-	size_t len, total;
+	int l;
+	extern struct stats stats;		
+	extern int am_sender;
+	extern int am_daemon;
 	int64 b;
 
-	*fmt = '%';
+	memset(buf,0,sizeof(buf));
 
-	/* We expand % codes one by one in place in buf.  We don't
-	 * copy in the terminating null of the inserted strings, but
-	 * rather keep going until we reach the null of the format. */
-	total = strlcpy(buf, format, sizeof buf);
-	if (total > MAXPATHLEN) {
-		rprintf(FERROR, "log-format string is WAY too long!\n");
-		exit_cleanup(RERR_MESSAGEIO);
-	}
-	buf[total++] = '\n';
-	buf[total] = '\0';
-
-	for (p = buf; (p = strchr(p, '%')) != NULL; ) {
-		s = p++;
-		n = fmt + 1;
-		if (*p == '-')
-			*n++ = *p++;
-		while (isdigit(*(uchar*)p) && n - fmt < (int)(sizeof fmt) - 8)
-			*n++ = *p++;
-		if (!*p)
-			break;
-		*n = '\0';
+	strlcpy(buf, format, sizeof(buf));
+	
+	for (s=&buf[0]; 
+	     s && (p=strchr(s,'%')); ) {
 		n = NULL;
+		s = p + 1;
 
-		switch (*p) {
+		switch (p[1]) {
 		case 'h': if (am_daemon) n = client_name(0); break;
 		case 'a': if (am_daemon) n = client_addr(0); break;
-		case 'l':
-			strlcat(fmt, ".0f", sizeof fmt);
-			snprintf(buf2, sizeof buf2, fmt,
-				 (double)file->length);
+		case 'l': 
+			slprintf(buf2,sizeof(buf2),"%.0f", 
+				 (double)file->length); 
 			n = buf2;
 			break;
-		case 'p':
-			strlcat(fmt, "ld", sizeof fmt);
-			snprintf(buf2, sizeof buf2, fmt,
-				 (long)getpid());
+		case 'p': 
+			slprintf(buf2,sizeof(buf2),"%d", 
+				 (int)getpid()); 
 			n = buf2;
 			break;
 		case 'o': n = op; break;
-		case 'f':
-			n = safe_fname(f_name(file));
-			if (am_sender && file->dir.root) {
-				pathjoin(buf2, sizeof buf2,
-					 file->dir.root, n);
-				/* The buffer from safe_fname() has more
-				 * room than MAXPATHLEN, so this is safe. */
-				if (fmt[1])
-					strcpy(n, buf2);
-				else
-					n = buf2;
-			}
-			clean_fname(n, 0);
-			if (*n == '/')
-				n++;
-			break;
-		case 'n':
-			n = safe_fname(f_name(file));
-			if (S_ISDIR(file->mode)) {
-				/* The buffer from safe_fname() has more
-				 * room than MAXPATHLEN, so this is safe. */
-				strcat(n, "/");
-			}
-			break;
-		case 'L':
-			if (hlink && *hlink) {
-				n = safe_fname(hlink);
-				strcpy(buf2, " => ");
-			} else if (S_ISLNK(file->mode) && file->u.link) {
-				n = safe_fname(file->u.link);
-				strcpy(buf2, " -> ");
-			} else {
-				n = "";
-				if (!fmt[1])
-					break;
-				strcpy(buf2, "    ");
-			}
-			strlcat(fmt, "s", sizeof fmt);
-			snprintf(buf2 + 4, sizeof buf2 - 4, fmt, n);
-			n = buf2;
+		case 'f': 
+			slprintf(buf2, sizeof(buf2), "%s/%s", 
+				 file->basedir?file->basedir:"", 
+				 f_name(file));
+			clean_fname(buf2);
+			n = buf2; 
+			if (*n == '/') n++;
 			break;
 		case 'm': n = lp_name(module_id); break;
 		case 't': n = timestring(time(NULL)); break;
 		case 'P': n = lp_path(module_id); break;
 		case 'u': n = auth_user; break;
-		case 'b':
+		case 'b': 
 			if (am_sender) {
-				b = stats.total_written -
+				b = stats.total_written - 
 					initial_stats->total_written;
 			} else {
-				b = stats.total_read -
+				b = stats.total_read - 
 					initial_stats->total_read;
 			}
-			strlcat(fmt, ".0f", sizeof fmt);
-			snprintf(buf2, sizeof buf2, fmt, (double)b);
+			slprintf(buf2,sizeof(buf2),"%.0f", (double)b); 
 			n = buf2;
 			break;
-		case 'c':
+		case 'c': 
 			if (!am_sender) {
-				b = stats.total_written -
+				b = stats.total_written - 
 					initial_stats->total_written;
 			} else {
-				b = stats.total_read -
+				b = stats.total_read - 
 					initial_stats->total_read;
 			}
-			strlcat(fmt, ".0f", sizeof fmt);
-			snprintf(buf2, sizeof buf2, fmt, (double)b);
+			slprintf(buf2,sizeof(buf2),"%.0f", (double)b); 
 			n = buf2;
 			break;
-		case 'i':
-			if (iflags & ITEM_DELETED) {
-				n = "*deleting";
-				break;
-			}
-			n = buf2 + MAXPATHLEN - 32;
-			n[0] = iflags & ITEM_LOCAL_CHANGE
-			      ? iflags & ITEM_XNAME_FOLLOWS ? 'h' : 'c'
-			     : !(iflags & ITEM_TRANSFER) ? '.'
-			     : !local_server && *op == 's' ? '<' : '>';
-			n[1] = S_ISDIR(file->mode) ? 'd'
-			     : IS_DEVICE(file->mode) ? 'D'
-			     : S_ISLNK(file->mode) ? 'L' : 'f';
-			n[2] = !(iflags & ITEM_REPORT_CHECKSUM) ? '.' : 'c';
-			n[3] = !(iflags & ITEM_REPORT_SIZE) ? '.' : 's';
-			n[4] = !(iflags & ITEM_REPORT_TIME) ? '.'
-			     : !preserve_times || IS_DEVICE(file->mode)
-					       || S_ISLNK(file->mode) ? 'T' : 't';
-			n[5] = !(iflags & ITEM_REPORT_PERMS) ? '.' : 'p';
-			n[6] = !(iflags & ITEM_REPORT_OWNER) ? '.' : 'o';
-			n[7] = !(iflags & ITEM_REPORT_GROUP) ? '.' : 'g';
-			n[8] = !(iflags & ITEM_REPORT_XATTRS) ? '.' : 'a';
-			n[9] = '\0';
-
-			if (iflags & (ITEM_IS_NEW|ITEM_MISSING_DATA)) {
-				char ch = iflags & ITEM_IS_NEW ? '+' : '?';
-				int i;
-				for (i = 2; n[i]; i++)
-					n[i] = ch;
-			} else if (!(iflags & (ITEM_TRANSFER|ITEM_LOCAL_CHANGE))) {
-				int i;
-				for (i = 2; n[i]; i++) {
-					if (n[i] != '.')
-						break;
-				}
-				if (!n[i]) {
-					for (i = 2; n[i]; i++)
-						n[i] = ' ';
-				}
-			}
-			break;
 		}
 
-		/* "n" is the string to be inserted in place of this % code. */
-		if (!n)
-			continue;
-		if (n != buf2 && fmt[1]) {
-			strlcat(fmt, "s", sizeof fmt);
-			snprintf(buf2, sizeof buf2, fmt, n);
-			n = buf2;
-		}
-		len = strlen(n);
+		if (!n) continue;
 
-		/* Subtract the length of the escape from the string's size. */
-		total -= p - s + 1;
+		l = strlen(n);
 
-		if (len + total >= (size_t)sizeof buf) {
-			rprintf(FERROR,
-				"buffer overflow expanding %%%c -- exiting\n",
+		if (l + ((int)(s - &buf[0])) > sizeof(buf)) {
+			rprintf(FERROR,"buffer overflow expanding %%%c - exiting\n",
 				p[0]);
 			exit_cleanup(RERR_MESSAGEIO);
 		}
 
-		/* Shuffle the rest of the string along to make space for n */
-		if (len != (size_t)(p - s + 1))
-			memmove(s + len, p + 1, total - (s - buf) + 1);
-		total += len;
+		if (l != 2) {
+			memmove(s+(l-1), s+1, strlen(s+1)+1);
+		}
+		memcpy(p, n, l);
 
-		/* Insert the contents of string "n", but NOT its null. */
-		if (len)
-			memcpy(s, n, len);
-
-		/* Skip over inserted string; continue looking */
-		p = s + len;
+		s = p+l;
 	}
 
-	rwrite(code, buf, total);
+	rprintf(code,"%s\n", buf);
 }
 
-/* Return 1 if the format escape is in the log-format string (e.g. look for
- * the 'b' in the "%9b" format escape). */
-int log_format_has(const char *format, char esc)
+/* log the outgoing transfer of a file */
+void log_send(struct file_struct *file, struct stats *initial_stats)
 {
-	const char *p;
-
-	if (!format)
-		return 0;
-
-	for (p = format; (p = strchr(p, '%')) != NULL; ) {
-		if (*++p == '-')
-			p++;
-		while (isdigit(*(uchar*)p))
-			p++;
-		if (!*p)
-			break;
-		if (*p == esc)
-			return 1;
-	}
-	return 0;
-}
-
-/* log the transfer of a file */
-void log_item(struct file_struct *file, struct stats *initial_stats,
-	      int iflags, char *hlink)
-{
-	char *s_or_r = am_sender ? "send" : "recv";
+	extern int module_id;
+	extern int am_server;
+	extern char *log_format;
 
 	if (lp_transfer_logging(module_id)) {
-		log_formatted(FLOG, lp_log_format(module_id), s_or_r,
-			      file, initial_stats, iflags, hlink);
+		log_formatted(FLOG, lp_log_format(module_id), "send", file, initial_stats);
 	} else if (log_format && !am_server) {
-		log_formatted(FINFO, log_format, s_or_r,
-			      file, initial_stats, iflags, hlink);
+		log_formatted(FINFO, log_format, "send", file, initial_stats);
 	}
 }
 
-void maybe_log_item(struct file_struct *file, int iflags, int itemizing,
-		    char *buf)
+/* log the incoming transfer of a file */
+void log_recv(struct file_struct *file, struct stats *initial_stats)
 {
-	int see_item = itemizing && (iflags || verbose > 1);
-	if (am_server) {
-		if (am_daemon && !dry_run && see_item)
-			log_item(file, &stats, iflags, buf);
-	} else if (see_item || iflags & ITEM_LOCAL_CHANGE || *buf
-	    || (S_ISDIR(file->mode) && iflags & SIGNIFICANT_ITEM_FLAGS))
-		log_item(file, &stats, iflags, buf);
-}
+	extern int module_id;
+	extern int am_server;
+	extern char *log_format;
 
-void log_delete(char *fname, int mode)
-{
-	static struct file_struct file;
-	int len = strlen(fname);
-	char *fmt;
-
-	file.mode = mode;
-	file.basename = fname;
-
-	if (!verbose && !log_format)
-		;
-	else if (am_server && protocol_version >= 29 && len < MAXPATHLEN) {
-		if (S_ISDIR(mode))
-			len++; /* directories include trailing null */
-		send_msg(MSG_DELETED, fname, len);
-	} else {
-		fmt = log_format_has_o_or_i ? log_format : "deleting %n";
-		log_formatted(FCLIENT, fmt, "del.", &file, &stats,
-			      ITEM_DELETED, NULL);
+	if (lp_transfer_logging(module_id)) {
+		log_formatted(FLOG, lp_log_format(module_id), "recv", file, initial_stats);
+	} else if (log_format && !am_server) {
+		log_formatted(FINFO, log_format, "recv", file, initial_stats);
 	}
-
-	if (!am_daemon || dry_run || !lp_transfer_logging(module_id))
-		return;
-
-	fmt = daemon_log_format_has_o_or_i ? lp_log_format(module_id) : "deleting %n";
-	log_formatted(FLOG, fmt, "del.", &file, &stats, ITEM_DELETED, NULL);
 }
 
-
-/*
- * Called when the transfer is interrupted for some reason.
- *
- * Code is one of the RERR_* codes from errcode.h, or terminating
- * successfully.
- */
+/* called when the transfer is interrupted for some reason */
 void log_exit(int code, const char *file, int line)
 {
 	if (code == 0) {
-		rprintf(FLOG,"sent %.0f bytes  received %.0f bytes  total size %.0f\n",
+		extern struct stats stats;		
+		rprintf(FLOG,"wrote %.0f bytes  read %.0f bytes  total size %.0f\n",
 			(double)stats.total_written,
 			(double)stats.total_read,
 			(double)stats.total_size);
 	} else {
-		const char *name;
-
-		name = rerr_name(code);
-		if (!name)
-			name = "unexplained error";
-
-		/* VANISHED is not an error, only a warning */
-		if (code == RERR_VANISHED) {
-			rprintf(FINFO, "rsync warning: %s (code %d) at %s(%d)\n", 
-				name, code, file, line);
-		} else {
-			rprintf(FERROR, "rsync error: %s (code %d) at %s(%d)\n",
-				name, code, file, line);
-		}
+		rprintf(FLOG,"transfer interrupted (code %d) at %s(%d)\n", 
+			code, file, line);
 	}
 }
+
+/* log the incoming transfer of a file for interactive use, this
+   will be called at the end where the client was run 
+   
+   it i called when a file starts to be transferred
+*/
+void log_transfer(struct file_struct *file, const char *fname)
+{
+	extern int verbose;
+
+	if (!verbose) return;
+
+	rprintf(FINFO,"%s\n", fname);
+}
+

match.c

@@ -1,17 +1,17 @@
-/*
+/* 
    Copyright (C) Andrew Tridgell 1996
    Copyright (C) Paul Mackerras 1996
-
+   
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
-
+   
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
+   
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
@@ -19,12 +19,12 @@
 
 #include "rsync.h"
 
+extern int csum_length;
+
 extern int verbose;
 extern int am_server;
-extern int do_progress;
-extern int checksum_seed;
 
-int updating_basis_file;
+extern int remote_version;
 
 typedef unsigned short tag;
 
@@ -43,88 +43,74 @@ static int total_matches;
 extern struct stats stats;
 
 struct target {
-	tag t;
-	int32 i;
+  tag t;
+  int i;
 };
 
 static struct target *targets;
 
-static int32 *tag_table;
+static int *tag_table;
 
 #define gettag2(s1,s2) (((s1) + (s2)) & 0xFFFF)
 #define gettag(sum) gettag2((sum)&0xFFFF,(sum)>>16)
 
 static int compare_targets(struct target *t1,struct target *t2)
 {
-	return (int)t1->t - (int)t2->t;
+  return((int)t1->t - (int)t2->t);
 }
 
 
 static void build_hash_table(struct sum_struct *s)
 {
-	int32 i;
+  int i;
 
-	if (!tag_table)
-		tag_table = new_array(int32, TABLESIZE);
+  if (!tag_table)
+    tag_table = (int *)malloc(sizeof(tag_table[0])*TABLESIZE);
 
-	targets = new_array(struct target, s->count);
-	if (!tag_table || !targets)
-		out_of_memory("build_hash_table");
+  targets = (struct target *)malloc(sizeof(targets[0])*s->count);
+  if (!tag_table || !targets) 
+    out_of_memory("build_hash_table");
 
-	for (i = 0; i < s->count; i++) {
-		targets[i].i = i;
-		targets[i].t = gettag(s->sums[i].sum1);
-	}
+  for (i=0;i<s->count;i++) {
+    targets[i].i = i;
+    targets[i].t = gettag(s->sums[i].sum1);
+  }
 
-	qsort(targets,s->count,sizeof(targets[0]),(int (*)())compare_targets);
+  qsort(targets,s->count,sizeof(targets[0]),(int (*)())compare_targets);
 
-	for (i = 0; i < TABLESIZE; i++)
-		tag_table[i] = NULL_TAG;
+  for (i=0;i<TABLESIZE;i++)
+    tag_table[i] = NULL_TAG;
 
-	for (i = s->count; i-- > 0; )
-		tag_table[targets[i].t] = i;
+  for (i=s->count-1;i>=0;i--) {    
+    tag_table[targets[i].t] = i;
+  }
 }
 
 
 static OFF_T last_match;
 
 
-/**
- * Transmit a literal and/or match token.
- *
- * This delightfully-named function is called either when we find a
- * match and need to transmit all the unmatched data leading up to it,
- * or when we get bored of accumulating literal data and just need to
- * transmit it.  As a result of this second case, it is called even if
- * we have not matched at all!
- *
- * @param i If >0, the number of a matched token.  If 0, indicates we
- * have only literal data.
- **/
-static void matched(int f, struct sum_struct *s, struct map_struct *buf,
-		    OFF_T offset, int32 i)
+static void matched(int f,struct sum_struct *s,struct map_struct *buf,
+		    OFF_T offset,int i)
 {
-	int32 n = offset - last_match; /* max value: block_size (int32) */
-	int32 j;
+	OFF_T n = offset - last_match;
+	OFF_T j;
 
-	if (verbose > 2 && i >= 0) {
-		rprintf(FINFO,
-			"match at %.0f last_match=%.0f j=%d len=%ld n=%ld\n",
-			(double)offset, (double)last_match, i,
-			(long)s->sums[i].len, (long)n);
-	}
+	if (verbose > 2 && i >= 0)
+		rprintf(FINFO,"match at %.0f last_match=%.0f j=%d len=%d n=%.0f\n",
+			(double)offset,(double)last_match,i,s->sums[i].len,(double)n);
 
-	send_token(f, i, buf, last_match, n, i < 0 ? 0 : s->sums[i].len);
+	send_token(f,i,buf,last_match,n,i<0?0:s->sums[i].len);
 	data_transfer += n;
 
 	if (i >= 0) {
 		stats.matched_data += s->sums[i].len;
 		n += s->sums[i].len;
 	}
-
-	for (j = 0; j < n; j += CHUNK_SIZE) {
-		int32 n1 = MIN(CHUNK_SIZE, n - j);
-		sum_update(map_ptr(buf, last_match + j, n1), n1);
+  
+	for (j=0;j<n;j+=CHUNK_SIZE) {
+		int n1 = MIN(CHUNK_SIZE,n-j);
+		sum_update(map_ptr(buf,last_match+j,n1),n1);
 	}
 
 
@@ -133,161 +119,126 @@ static void matched(int f, struct sum_struct *s, struct map_struct *buf,
 	else
 		last_match = offset;
 
-	if (buf && do_progress)
+	if (buf) {
 		show_progress(last_match, buf->file_size);
+
+		if (i == -1) end_progress(buf->file_size);
+	}
 }
 
 
 static void hash_search(int f,struct sum_struct *s,
-			struct map_struct *buf, OFF_T len)
+			struct map_struct *buf,OFF_T len)
 {
-	OFF_T offset, end, backup;
-	int32 k, want_i;
+	OFF_T offset, end;
+	int j,k, last_i;
 	char sum2[SUM_LENGTH];
-	uint32 s1, s2, sum;
-	int more;
+	uint32 s1, s2, sum; 
 	schar *map;
 
-	/* want_i is used to encourage adjacent matches, allowing the RLL
-	 * coding of the output to work more efficiently. */
-	want_i = 0;
+	/* last_i is used to encourage adjacent matches, allowing the RLL coding of the
+	   output to work more efficiently */
+	last_i = -1;
 
-	if (verbose > 2) {
-		rprintf(FINFO, "hash search b=%ld len=%.0f\n",
-			(long)s->blength, (double)len);
-	}
-
-	k = (int32)MIN(len, (OFF_T)s->blength);
-
-	map = (schar *)map_ptr(buf, 0, k);
+	if (verbose > 2)
+		rprintf(FINFO,"hash search b=%d len=%.0f\n",s->n,(double)len);
 
+	k = MIN(len, s->n);
+	
+	map = (schar *)map_ptr(buf,0,k);
+	
 	sum = get_checksum1((char *)map, k);
 	s1 = sum & 0xFFFF;
 	s2 = sum >> 16;
 	if (verbose > 3)
-		rprintf(FINFO, "sum=%.8x k=%ld\n", sum, (long)k);
-
+		rprintf(FINFO, "sum=%.8x k=%d\n", sum, k);
+	
 	offset = 0;
-
+	
 	end = len + 1 - s->sums[s->count-1].len;
-
-	if (verbose > 3) {
-		rprintf(FINFO, "hash search s->blength=%ld len=%.0f count=%.0f\n",
-			(long)s->blength, (double)len, (double)s->count);
-	}
-
+	
+	if (verbose > 3)
+		rprintf(FINFO,"hash search s->n=%d len=%.0f count=%d\n",
+			s->n,(double)len,s->count);
+	
 	do {
 		tag t = gettag2(s1,s2);
 		int done_csum2 = 0;
-		int32 j = tag_table[t];
-
+			
+		j = tag_table[t];
 		if (verbose > 4)
 			rprintf(FINFO,"offset=%.0f sum=%08x\n",(double)offset,sum);
-
-		if (j == NULL_TAG)
+		
+		if (j == NULL_TAG) {
 			goto null_tag;
+		}
 
 		sum = (s1 & 0xffff) | (s2 << 16);
 		tag_hits++;
-		do {
-			int32 l, i = targets[j].i;
-
-			if (sum != s->sums[i].sum1)
-				continue;
-
+		for (; j<s->count && targets[j].t == t; j++) {
+			int l, i = targets[j].i;
+			
+			if (sum != s->sums[i].sum1) continue;
+			
 			/* also make sure the two blocks are the same length */
-			l = (int32)MIN((OFF_T)s->blength, len-offset);
-			if (l != s->sums[i].len)
-				continue;
-
-			/* in-place: ensure chunk's offset is either >= our
-			 * offset or that the data didn't move. */
-			if (updating_basis_file && s->sums[i].offset < offset
-			    && !(s->sums[i].flags & SUMFLG_SAME_OFFSET))
-				continue;
+			l = MIN(s->n,len-offset);
+			if (l != s->sums[i].len) continue;			
 
 			if (verbose > 3)
-				rprintf(FINFO,"potential match at %.0f target=%.0f %.0f sum=%08x\n",
-					(double)offset,(double)j,(double)i,sum);
-
+				rprintf(FINFO,"potential match at %.0f target=%d %d sum=%08x\n",
+					(double)offset,j,i,sum);
+			
 			if (!done_csum2) {
 				map = (schar *)map_ptr(buf,offset,l);
 				get_checksum2((char *)map,l,sum2);
 				done_csum2 = 1;
 			}
-
-			if (memcmp(sum2,s->sums[i].sum2,s->s2length) != 0) {
+			
+			if (memcmp(sum2,s->sums[i].sum2,csum_length) != 0) {
 				false_alarms++;
 				continue;
 			}
 
-			/* When updating in-place, the best possible match is
-			 * one with an identical offset, so we prefer that over
-			 * the following want_i optimization. */
-			if (updating_basis_file) {
-				do {
-					int32 i2 = targets[j].i;
-					if (s->sums[i2].offset != offset)
-						continue;
-					if (i2 != i) {
-						if (sum != s->sums[i2].sum1)
-							break;
-						if (memcmp(sum2, s->sums[i2].sum2,
-							   s->s2length) != 0)
-							break;
-						i = i2;
-					}
-					/* This chunk was at the same offset on
-					 * both the sender and the receiver. */
-					s->sums[i].flags |= SUMFLG_SAME_OFFSET;
-					goto set_want_i;
-				} while (++j < s->count && targets[j].t == t);
-			}
-
 			/* we've found a match, but now check to see
-			 * if want_i can hint at a better match. */
-			if (i != want_i && want_i < s->count
-			    && (!updating_basis_file || s->sums[want_i].offset >= offset
-			     || s->sums[want_i].flags & SUMFLG_SAME_OFFSET)
-			    && sum == s->sums[want_i].sum1
-			    && memcmp(sum2, s->sums[want_i].sum2, s->s2length) == 0) {
-				/* we've found an adjacent match - the RLL coder
-				 * will be happy */
-				i = want_i;
+                           if last_i can hint at a better match */
+			for (j++; j<s->count && targets[j].t == t; j++) {
+				int i2 = targets[j].i;
+				if (i2 == last_i + 1) {
+					if (sum != s->sums[i2].sum1) break;
+					if (memcmp(sum2,s->sums[i2].sum2,csum_length) != 0) break;
+					/* we've found an adjacent match - the RLL coder 
+					   will be happy */
+					i = i2;
+					break;
+				}
 			}
-		    set_want_i:
-			want_i = i + 1;
 
+			last_i = i;
+			
 			matched(f,s,buf,offset,i);
 			offset += s->sums[i].len - 1;
-			k = (int32)MIN((OFF_T)s->blength, len-offset);
-			map = (schar *)map_ptr(buf, offset, k);
+			k = MIN((len-offset), s->n);
+			map = (schar *)map_ptr(buf,offset,k);
 			sum = get_checksum1((char *)map, k);
 			s1 = sum & 0xFFFF;
 			s2 = sum >> 16;
 			matches++;
 			break;
-		} while (++j < s->count && targets[j].t == t);
-
+		}
+		
 	null_tag:
-		backup = offset - last_match;
-		/* We sometimes read 1 byte prior to last_match... */
-		if (backup < 0)
-			backup = 0;
-
 		/* Trim off the first byte from the checksum */
-		more = offset + k < len;
-		map = (schar *)map_ptr(buf, offset - backup, k + more + backup)
-		    + backup;
+		map = (schar *)map_ptr(buf,offset,k+1);
 		s1 -= map[0] + CHAR_OFFSET;
 		s2 -= k * (map[0]+CHAR_OFFSET);
-
+		
 		/* Add on the next byte (if there is one) to the checksum */
-		if (more) {
-			s1 += map[k] + CHAR_OFFSET;
+		if (k < (len-offset)) {
+			s1 += (map[k]+CHAR_OFFSET);
 			s2 += s1;
-		} else
+		} else {
 			--k;
+		}
 
 		/* By matching early we avoid re-reading the
 		   data 3 times in the case where a token
@@ -295,77 +246,69 @@ static void hash_search(int f,struct sum_struct *s,
 		   match. The 3 reads are caused by the
 		   running match, the checksum update and the
 		   literal send. */
-		if (backup >= s->blength+CHUNK_SIZE && end-offset > CHUNK_SIZE)
-			matched(f, s, buf, offset - s->blength, -2);
+		if (offset-last_match >= CHUNK_SIZE+s->n && 
+		    (end-offset > CHUNK_SIZE)) {
+			matched(f,s,buf,offset - s->n, -2);
+		}
 	} while (++offset < end);
-
-	matched(f, s, buf, len, -1);
-	map_ptr(buf, len-1, 1);
+	
+	matched(f,s,buf,len,-1);
+	map_ptr(buf,len-1,1);
 }
 
 
-/**
- * Scan through a origin file, looking for sections that match
- * checksums from the generator, and transmit either literal or token
- * data.
- *
- * Also calculates the MD4 checksum of the whole file, using the md
- * accumulator.  This is transmitted with the file as protection
- * against corruption on the wire.
- *
- * @param s Checksums received from the generator.  If <tt>s->count ==
- * 0</tt>, then there are actually no checksums for this file.
- *
- * @param len Length of the file to send.
- **/
-void match_sums(int f, struct sum_struct *s, struct map_struct *buf, OFF_T len)
+void match_sums(int f,struct sum_struct *s,struct map_struct *buf,OFF_T len)
 {
 	char file_sum[MD4_SUM_LENGTH];
+	extern int write_batch;  /*  dw */
 
 	last_match = 0;
 	false_alarms = 0;
 	tag_hits = 0;
-	matches = 0;
-	data_transfer = 0;
+	matches=0;
+	data_transfer=0;
 
-	sum_init(checksum_seed);
+	sum_init();
 
-	if (len > 0 && s->count > 0) {
+	if (len > 0 && s->count>0) {
 		build_hash_table(s);
-
-		if (verbose > 2)
+		
+		if (verbose > 2) 
 			rprintf(FINFO,"built hash table\n");
-
+		
 		hash_search(f,s,buf,len);
-
-		if (verbose > 2)
+		
+		if (verbose > 2) 
 			rprintf(FINFO,"done hash search\n");
 	} else {
 		OFF_T j;
 		/* by doing this in pieces we avoid too many seeks */
-		for (j = CHUNK_SIZE; j < len; j += CHUNK_SIZE)
-			matched(f, s, buf, j, -2);
-		matched(f, s, buf, len, -1);
+		for (j=0;j<(len-CHUNK_SIZE);j+=CHUNK_SIZE) {
+			int n1 = MIN(CHUNK_SIZE,(len-CHUNK_SIZE)-j);
+			matched(f,s,buf,j+n1,-2);
+		}
+		matched(f,s,buf,len,-1);
 	}
 
 	sum_end(file_sum);
-	/* If we had a read error, send a bad checksum. */
-	if (buf && buf->status != 0)
-		file_sum[0]++;
 
-	if (verbose > 2)
-		rprintf(FINFO,"sending file_sum\n");
-	write_buf(f,file_sum,MD4_SUM_LENGTH);
+	if (remote_version >= 14) {
+		if (verbose > 2)
+			rprintf(FINFO,"sending file_sum\n");
+		write_buf(f,file_sum,MD4_SUM_LENGTH);
+		if (write_batch) /* dw */
+		    write_batch_delta_file(file_sum, MD4_SUM_LENGTH);
+	}
 
 	if (targets) {
 		free(targets);
 		targets=NULL;
 	}
-
+	
 	if (verbose > 2)
 		rprintf(FINFO, "false_alarms=%d tag_hits=%d matches=%d\n",
 			false_alarms, tag_hits, matches);
-
+	
 	total_tag_hits += tag_hits;
 	total_false_alarms += false_alarms;
 	total_matches += matches;

mkproto.awk

@@ -58,7 +58,7 @@ BEGIN {
   next;
 }
 
-!/^OFF_T|^size_t|^off_t|^pid_t|^unsigned|^mode_t|^DIR|^user|^int|^char|^uint|^uchar|^short|^struct|^BOOL|^void|^time|^const/ {
+!/^OFF_T|^size_t|^off_t|^pid_t|^unsigned|^mode_t|^DIR|^user|^int|^char|^uint|^struct|^BOOL|^void|^time/ {
   next;
 }
 

packaging/lsb/rsync.spec

@@ -1,60 +1,31 @@
-Summary: A program for synchronizing files over a network.
+Summary: Program for efficient remote updates of files.
 Name: rsync
-Version: 2.6.5
+Version: 2.5.1
 Release: 1
-Group: Applications/Internet
-Source:	ftp://rsync.samba.org/pub/rsync/rsync-%{version}.tar.gz
-URL: http://rsync.samba.org/
-
-Prefix: %{_prefix}
-BuildRoot: /var/tmp/%{name}-root
-License: GPL
+Copyright: GPL
+Group: Applications/Networking
+Source:	ftp://samba.anu.edu.au/pub/rsync/rsync-2.5.1.tar.gz
+URL: http://samba.anu.edu.au/rsync/
+Packager: Andrew Tridgell <tridge@samba.anu.edu.au>
+BuildRoot: /tmp/rsync
 
 %description
-Rsync uses a reliable algorithm to bring remote and host files into
-sync very quickly. Rsync is fast because it just sends the differences
-in the files over the network instead of sending the complete
-files. Rsync is often used as a very powerful mirroring process or
-just as a more capable replacement for the rcp command. A technical
-report which describes the rsync algorithm is included in this
-package.
+rsync is a replacement for rcp that has many more features.
 
-%prep
-%setup -q
+rsync uses the "rsync algorithm" which provides a very fast method for
+bringing remote files into sync. It does this by sending just the
+differences in the files across the link, without requiring that both
+sets of files are present at one of the ends of the link beforehand.
 
-%build
-%configure
-
-make
-
-%install
-rm -rf $RPM_BUILD_ROOT
-
-%makeinstall
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%files
-%defattr(-,root,root)
-%doc COPYING README tech_report.tex
-%{_prefix}/bin/rsync
-%{_mandir}/man1/rsync.1*
-%{_mandir}/man5/rsyncd.conf.5*
+A technical report describing the rsync algorithm is included with
+this package. 
 
 %changelog
-* Thu Jan 30 2003 Horst von Brand <vonbrand@inf.utfsm.cl>
-  Fixed "Sept" date in %changelog here
-  Use %{_mandir} to point to manpages
-  Support for compressed manpages (* at end catches them in %files)
-  Add doc/README-SGML and doc/rsync.sgml to %doc
-
-* Mon Sep 11 2000 John H Terpstra <jht@turbolinux.com>
+* Mon Sept 11 2000 John H Terpstra <jht@turbolinux.com>
   Changed target paths to be Linux Standards Base compliant
 
 * Mon Jan 25 1999 Stefan Hornburg <racke@linuxia.de>
-  quoted RPM_OPT_FLAGS for the sake of robustness
-
+  quoted RPM_OPT_FLAGS for the sake of robustness  
 * Mon May 18 1998 Andrew Tridgell <tridge@samba.anu.edu.au>
   reworked for auto-building when I release rsync (tridge@samba.anu.edu.au)
 
@@ -86,3 +57,28 @@ to '%build', removed '%prefix'.
 
 rsync-1.6.2-1 packaged.  (This entry by jam to credit Michael for the
 previous package(s).)
+
+%prep
+%setup
+
+%build
+./configure --prefix=/usr --mandir=/usr/share/man
+make CFLAGS="$RPM_OPT_FLAGS"
+strip rsync
+
+%install
+mkdir -p $RPM_BUILD_ROOT/usr/{bin,share/man/{man1,man5}}
+install -m755 rsync $RPM_BUILD_ROOT/usr/bin
+install -m644 rsync.1 $RPM_BUILD_ROOT/usr/share/man/man1
+install -m644 rsyncd.conf.5 $RPM_BUILD_ROOT/usr/share/man/man5
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%attr(-,root,root) /usr/bin/rsync
+%attr(-,root,root) /usr/share/man/man1/rsync.1
+%attr(-,root,root) /usr/share/man/man5/rsyncd.conf.5
+%attr(-,root,root) %doc tech_report.tex
+%attr(-,root,root) %doc README
+%attr(-,root,root) %doc COPYING

packaging/lsb/rsync.spec.tmpl

@@ -0,0 +1,84 @@
+Summary: Program for efficient remote updates of files.
+Name: rsync
+Version: PVERSION
+Release: PRELEASE
+Copyright: GPL
+Group: Applications/Networking
+Source:	ftp://samba.anu.edu.au/pub/rsync/rsync-PVERSION.tar.gz
+URL: http://samba.anu.edu.au/rsync/
+Packager: Andrew Tridgell <tridge@samba.anu.edu.au>
+BuildRoot: /tmp/rsync
+
+%description
+rsync is a replacement for rcp that has many more features.
+
+rsync uses the "rsync algorithm" which provides a very fast method for
+bringing remote files into sync. It does this by sending just the
+differences in the files across the link, without requiring that both
+sets of files are present at one of the ends of the link beforehand.
+
+A technical report describing the rsync algorithm is included with
+this package. 
+
+%changelog
+* Mon Sept 11 2000 John H Terpstra <jht@turbolinux.com>
+  Changed target paths to be Linux Standards Base compliant
+
+* Mon Jan 25 1999 Stefan Hornburg <racke@linuxia.de>
+  quoted RPM_OPT_FLAGS for the sake of robustness  
+* Mon May 18 1998 Andrew Tridgell <tridge@samba.anu.edu.au>
+  reworked for auto-building when I release rsync (tridge@samba.anu.edu.au)
+
+* Sat May 16 1998 John H Terpstra <jht@aquasoft.com.au>
+  Upgraded to Rsync 2.0.6
+    -new feature anonymous rsync
+
+* Mon Apr  6 1998 Douglas N. Arnold <dna@math.psu.edu>
+
+Upgrade to rsync version 1.7.2.
+
+* Sun Mar  1 1998 Douglas N. Arnold <dna@math.psu.edu>
+
+Built 1.6.9-1 based on the 1.6.3-2 spec file of John A. Martin.
+Changes from 1.6.3-2 packaging: added latex and dvips commands
+to create tech_report.ps.
+
+* Mon Aug 25 1997 John A. Martin <jam@jamux.com>
+
+Built 1.6.3-2 after finding no rsync-1.6.3-1.src.rpm although there
+was an ftp://ftp.redhat.com/pub/contrib/alpha/rsync-1.6.3-1.alpha.rpm
+showing no packager nor signature but giving 
+"Source RPM: rsync-1.6.3-1.src.rpm".
+
+Changes from 1.6.2-1 packaging: added '$RPM_OPT_FLAGS' to make, strip
+to '%build', removed '%prefix'.
+
+* Thu Apr 10 1997 Michael De La Rue <miked@ed.ac.uk>
+
+rsync-1.6.2-1 packaged.  (This entry by jam to credit Michael for the
+previous package(s).)
+
+%prep
+%setup
+
+%build
+./configure --prefix=/usr --mandir=/usr/share/man
+make CFLAGS="$RPM_OPT_FLAGS"
+strip rsync
+
+%install
+mkdir -p $RPM_BUILD_ROOT/usr/{bin,share/man/{man1,man5}}
+install -m755 rsync $RPM_BUILD_ROOT/usr/bin
+install -m644 rsync.1 $RPM_BUILD_ROOT/usr/share/man/man1
+install -m644 rsyncd.conf.5 $RPM_BUILD_ROOT/usr/share/man/man5
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%attr(-,root,root) /usr/bin/rsync
+%attr(-,root,root) /usr/share/man/man1/rsync.1
+%attr(-,root,root) /usr/share/man/man5/rsyncd.conf.5
+%attr(-,root,root) %doc tech_report.tex
+%attr(-,root,root) %doc README
+%attr(-,root,root) %doc COPYING

packaging/redhat/5.0/rsync.spec

@@ -0,0 +1,81 @@
+Summary: Program for efficient remote updates of files.
+Name: rsync
+Version: 2.5.1
+Release: 1
+Copyright: GPL
+Group: Applications/Networking
+Source:	ftp://samba.anu.edu.au/pub/rsync/rsync-2.5.1.tar.gz
+URL: http://samba.anu.edu.au/rsync/
+Packager: Andrew Tridgell <tridge@samba.anu.edu.au>
+BuildRoot: /tmp/rsync
+
+%description
+rsync is a replacement for rcp that has many more features.
+
+rsync uses the "rsync algorithm" which provides a very fast method for
+bringing remote files into sync. It does this by sending just the
+differences in the files across the link, without requiring that both
+sets of files are present at one of the ends of the link beforehand.
+
+A technical report describing the rsync algorithm is included with
+this package. 
+
+%changelog
+* Mon Jan 25 1999 Stefan Hornburg <racke@linuxia.de>
+  quoted RPM_OPT_FLAGS for the sake of robustness  
+* Mon May 18 1998 Andrew Tridgell <tridge@samba.anu.edu.au>
+  reworked for auto-building when I release rsync (tridge@samba.anu.edu.au)
+
+* Sat May 16 1998 John H Terpstra <jht@aquasoft.com.au>
+  Upgraded to Rsync 2.0.6
+    -new feature anonymous rsync
+
+* Mon Apr  6 1998 Douglas N. Arnold <dna@math.psu.edu>
+
+Upgrade to rsync version 1.7.2.
+
+* Sun Mar  1 1998 Douglas N. Arnold <dna@math.psu.edu>
+
+Built 1.6.9-1 based on the 1.6.3-2 spec file of John A. Martin.
+Changes from 1.6.3-2 packaging: added latex and dvips commands
+to create tech_report.ps.
+
+* Mon Aug 25 1997 John A. Martin <jam@jamux.com>
+
+Built 1.6.3-2 after finding no rsync-1.6.3-1.src.rpm although there
+was an ftp://ftp.redhat.com/pub/contrib/alpha/rsync-1.6.3-1.alpha.rpm
+showing no packager nor signature but giving 
+"Source RPM: rsync-1.6.3-1.src.rpm".
+
+Changes from 1.6.2-1 packaging: added '$RPM_OPT_FLAGS' to make, strip
+to '%build', removed '%prefix'.
+
+* Thu Apr 10 1997 Michael De La Rue <miked@ed.ac.uk>
+
+rsync-1.6.2-1 packaged.  (This entry by jam to credit Michael for the
+previous package(s).)
+
+%prep
+%setup
+
+%build
+./configure --prefix=/usr
+make CFLAGS="$RPM_OPT_FLAGS"
+strip rsync
+
+%install
+mkdir -p $RPM_BUILD_ROOT/usr/{bin,man/{man1,man5}}
+install -m755 rsync $RPM_BUILD_ROOT/usr/bin
+install -m644 rsync.1 $RPM_BUILD_ROOT/usr/man/man1
+install -m644 rsyncd.conf.5 $RPM_BUILD_ROOT/usr/man/man5
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%attr(-,root,root) /usr/bin/rsync
+%attr(-,root,root) /usr/man/man1/rsync.1
+%attr(-,root,root) /usr/man/man5/rsyncd.conf.5
+%attr(-,root,root) %doc tech_report.tex
+%attr(-,root,root) %doc README
+%attr(-,root,root) %doc COPYING

packaging/redhat/5.0/rsync.spec.tmpl

@@ -0,0 +1,81 @@
+Summary: Program for efficient remote updates of files.
+Name: rsync
+Version: PVERSION
+Release: PRELEASE
+Copyright: GPL
+Group: Applications/Networking
+Source:	ftp://samba.anu.edu.au/pub/rsync/rsync-PVERSION.tar.gz
+URL: http://samba.anu.edu.au/rsync/
+Packager: Andrew Tridgell <tridge@samba.anu.edu.au>
+BuildRoot: /tmp/rsync
+
+%description
+rsync is a replacement for rcp that has many more features.
+
+rsync uses the "rsync algorithm" which provides a very fast method for
+bringing remote files into sync. It does this by sending just the
+differences in the files across the link, without requiring that both
+sets of files are present at one of the ends of the link beforehand.
+
+A technical report describing the rsync algorithm is included with
+this package. 
+
+%changelog
+* Mon Jan 25 1999 Stefan Hornburg <racke@linuxia.de>
+  quoted RPM_OPT_FLAGS for the sake of robustness  
+* Mon May 18 1998 Andrew Tridgell <tridge@samba.anu.edu.au>
+  reworked for auto-building when I release rsync (tridge@samba.anu.edu.au)
+
+* Sat May 16 1998 John H Terpstra <jht@aquasoft.com.au>
+  Upgraded to Rsync 2.0.6
+    -new feature anonymous rsync
+
+* Mon Apr  6 1998 Douglas N. Arnold <dna@math.psu.edu>
+
+Upgrade to rsync version 1.7.2.
+
+* Sun Mar  1 1998 Douglas N. Arnold <dna@math.psu.edu>
+
+Built 1.6.9-1 based on the 1.6.3-2 spec file of John A. Martin.
+Changes from 1.6.3-2 packaging: added latex and dvips commands
+to create tech_report.ps.
+
+* Mon Aug 25 1997 John A. Martin <jam@jamux.com>
+
+Built 1.6.3-2 after finding no rsync-1.6.3-1.src.rpm although there
+was an ftp://ftp.redhat.com/pub/contrib/alpha/rsync-1.6.3-1.alpha.rpm
+showing no packager nor signature but giving 
+"Source RPM: rsync-1.6.3-1.src.rpm".
+
+Changes from 1.6.2-1 packaging: added '$RPM_OPT_FLAGS' to make, strip
+to '%build', removed '%prefix'.
+
+* Thu Apr 10 1997 Michael De La Rue <miked@ed.ac.uk>
+
+rsync-1.6.2-1 packaged.  (This entry by jam to credit Michael for the
+previous package(s).)
+
+%prep
+%setup
+
+%build
+./configure --prefix=/usr
+make CFLAGS="$RPM_OPT_FLAGS"
+strip rsync
+
+%install
+mkdir -p $RPM_BUILD_ROOT/usr/{bin,man/{man1,man5}}
+install -m755 rsync $RPM_BUILD_ROOT/usr/bin
+install -m644 rsync.1 $RPM_BUILD_ROOT/usr/man/man1
+install -m644 rsyncd.conf.5 $RPM_BUILD_ROOT/usr/man/man5
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%attr(-,root,root) /usr/bin/rsync
+%attr(-,root,root) /usr/man/man1/rsync.1
+%attr(-,root,root) /usr/man/man5/rsyncd.conf.5
+%attr(-,root,root) %doc tech_report.tex
+%attr(-,root,root) %doc README
+%attr(-,root,root) %doc COPYING

packaging/redhat/7.1/rsync.spec

@@ -0,0 +1,81 @@
+Summary: Program for efficient remote updates of files.
+Name: rsync
+Version: 2.5.1
+Release: 1
+Copyright: GPL
+Group: Applications/Networking
+Source:	ftp://samba.anu.edu.au/pub/rsync/rsync-2.5.1.tar.gz
+URL: http://samba.anu.edu.au/rsync/
+Packager: Andrew Tridgell <tridge@samba.anu.edu.au>
+BuildRoot: /tmp/rsync
+
+%description
+rsync is a replacement for rcp that has many more features.
+
+rsync uses the "rsync algorithm" which provides a very fast method for
+bringing remote files into sync. It does this by sending just the
+differences in the files across the link, without requiring that both
+sets of files are present at one of the ends of the link beforehand.
+
+A technical report describing the rsync algorithm is included with
+this package. 
+
+%changelog
+* Mon Jan 25 1999 Stefan Hornburg <racke@linuxia.de>
+  quoted RPM_OPT_FLAGS for the sake of robustness  
+* Mon May 18 1998 Andrew Tridgell <tridge@samba.anu.edu.au>
+  reworked for auto-building when I release rsync (tridge@samba.anu.edu.au)
+
+* Sat May 16 1998 John H Terpstra <jht@aquasoft.com.au>
+  Upgraded to Rsync 2.0.6
+    -new feature anonymous rsync
+
+* Mon Apr  6 1998 Douglas N. Arnold <dna@math.psu.edu>
+
+Upgrade to rsync version 1.7.2.
+
+* Sun Mar  1 1998 Douglas N. Arnold <dna@math.psu.edu>
+
+Built 1.6.9-1 based on the 1.6.3-2 spec file of John A. Martin.
+Changes from 1.6.3-2 packaging: added latex and dvips commands
+to create tech_report.ps.
+
+* Mon Aug 25 1997 John A. Martin <jam@jamux.com>
+
+Built 1.6.3-2 after finding no rsync-1.6.3-1.src.rpm although there
+was an ftp://ftp.redhat.com/pub/contrib/alpha/rsync-1.6.3-1.alpha.rpm
+showing no packager nor signature but giving 
+"Source RPM: rsync-1.6.3-1.src.rpm".
+
+Changes from 1.6.2-1 packaging: added '$RPM_OPT_FLAGS' to make, strip
+to '%build', removed '%prefix'.
+
+* Thu Apr 10 1997 Michael De La Rue <miked@ed.ac.uk>
+
+rsync-1.6.2-1 packaged.  (This entry by jam to credit Michael for the
+previous package(s).)
+
+%prep
+%setup
+
+%build
+./configure --prefix=/usr
+make CFLAGS="$RPM_OPT_FLAGS"
+strip rsync
+
+%install
+mkdir -p $RPM_BUILD_ROOT/usr/{bin,man/{man1,man5}}
+install -m755 rsync $RPM_BUILD_ROOT/usr/bin
+install -m644 rsync.1* $RPM_BUILD_ROOT/usr/man/man1
+install -m644 rsyncd.conf.5* $RPM_BUILD_ROOT/usr/man/man5
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%attr(-,root,root) /usr/bin/rsync
+%attr(-,root,root) /usr/man/man1/rsync.1*
+%attr(-,root,root) /usr/man/man5/rsyncd.conf.5*
+%attr(-,root,root) %doc tech_report.tex
+%attr(-,root,root) %doc README
+%attr(-,root,root) %doc COPYING

packaging/redhat/7.1/rsync.spec.tmpl

@@ -0,0 +1,81 @@
+Summary: Program for efficient remote updates of files.
+Name: rsync
+Version: PVERSION
+Release: PRELEASE
+Copyright: GPL
+Group: Applications/Networking
+Source:	ftp://samba.anu.edu.au/pub/rsync/rsync-PVERSION.tar.gz
+URL: http://samba.anu.edu.au/rsync/
+Packager: Andrew Tridgell <tridge@samba.anu.edu.au>
+BuildRoot: /tmp/rsync
+
+%description
+rsync is a replacement for rcp that has many more features.
+
+rsync uses the "rsync algorithm" which provides a very fast method for
+bringing remote files into sync. It does this by sending just the
+differences in the files across the link, without requiring that both
+sets of files are present at one of the ends of the link beforehand.
+
+A technical report describing the rsync algorithm is included with
+this package. 
+
+%changelog
+* Mon Jan 25 1999 Stefan Hornburg <racke@linuxia.de>
+  quoted RPM_OPT_FLAGS for the sake of robustness  
+* Mon May 18 1998 Andrew Tridgell <tridge@samba.anu.edu.au>
+  reworked for auto-building when I release rsync (tridge@samba.anu.edu.au)
+
+* Sat May 16 1998 John H Terpstra <jht@aquasoft.com.au>
+  Upgraded to Rsync 2.0.6
+    -new feature anonymous rsync
+
+* Mon Apr  6 1998 Douglas N. Arnold <dna@math.psu.edu>
+
+Upgrade to rsync version 1.7.2.
+
+* Sun Mar  1 1998 Douglas N. Arnold <dna@math.psu.edu>
+
+Built 1.6.9-1 based on the 1.6.3-2 spec file of John A. Martin.
+Changes from 1.6.3-2 packaging: added latex and dvips commands
+to create tech_report.ps.
+
+* Mon Aug 25 1997 John A. Martin <jam@jamux.com>
+
+Built 1.6.3-2 after finding no rsync-1.6.3-1.src.rpm although there
+was an ftp://ftp.redhat.com/pub/contrib/alpha/rsync-1.6.3-1.alpha.rpm
+showing no packager nor signature but giving 
+"Source RPM: rsync-1.6.3-1.src.rpm".
+
+Changes from 1.6.2-1 packaging: added '$RPM_OPT_FLAGS' to make, strip
+to '%build', removed '%prefix'.
+
+* Thu Apr 10 1997 Michael De La Rue <miked@ed.ac.uk>
+
+rsync-1.6.2-1 packaged.  (This entry by jam to credit Michael for the
+previous package(s).)
+
+%prep
+%setup
+
+%build
+./configure --prefix=/usr
+make CFLAGS="$RPM_OPT_FLAGS"
+strip rsync
+
+%install
+mkdir -p $RPM_BUILD_ROOT/usr/{bin,man/{man1,man5}}
+install -m755 rsync $RPM_BUILD_ROOT/usr/bin
+install -m644 rsync.1* $RPM_BUILD_ROOT/usr/man/man1
+install -m644 rsyncd.conf.5* $RPM_BUILD_ROOT/usr/man/man5
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%attr(-,root,root) /usr/bin/rsync
+%attr(-,root,root) /usr/man/man1/rsync.1*
+%attr(-,root,root) /usr/man/man5/rsyncd.conf.5*
+%attr(-,root,root) %doc tech_report.tex
+%attr(-,root,root) %doc README
+%attr(-,root,root) %doc COPYING

packaging/solaris/build_pkg.sh

@@ -1,94 +0,0 @@
-#!/bin/sh
-# Shell script for building Solaris package of rsync
-# Author: Jens Apel <jens.apel@web.de>
-# License: GPL
-#
-# BASEDIR is /usr/local and should be the same as the
-# --prefix parameter of configure
-#
-# this script should be copied under
-# packaging/solaris/5.8/build_pkg.sh
-
-# Definitions start here
-# you can edit this, if you like
-
-# The Package name under which rsync will b installed
-PKGNAME=SMBrsync
-
-# Extract common info requires for the 'info' part of the package.
-# This should be made generic and generated by the configure script
-# but for now it is hard coded
-BASEDIR=/usr/local
-VERSION="2.5.5"
-ARCH=`uname -p`
-NAME=rsync
-
-# Definitions end here
-# Please do not edit below this line or you know what you do.
-
-## Start by faking root install
-echo "Creating install directory (fake $BASEDIR)..."
-START=`pwd`
-FAKE_ROOT=$START/${PKGNAME}
-mkdir $FAKE_ROOT
-
-# copy the binary and the man page to their places
-mkdir $FAKE_ROOT/bin
-mkdir -p $FAKE_ROOT/doc/rsync
-mkdir -p $FAKE_ROOT/man/man1
-mkdir -p $FAKE_ROOT/man/man5
-
-cp ../../../rsync $FAKE_ROOT/bin/rsync
-cp ../../../rsync.1 $FAKE_ROOT/man/man1/rsync.1
-cp ../../../rsyncd.conf.5 $FAKE_ROOT/man/man5/rsyncd.conf.5
-cp ../../../README $FAKE_ROOT/doc/rsync/README
-cp ../../../COPYING $FAKE_ROOT/doc/rsync/COPYING
-cp ../../../tech_report.pdf $FAKE_ROOT/doc/rsync/tech_report.pdf
-cp ../../../COPYING $FAKE_ROOT/COPYING
-
-## Build info file
-echo "Building pkginfo file..."
-cat > $FAKE_ROOT/pkginfo << EOF_INFO
-PKG=$PKGNAME
-NAME=$NAME
-DESC="Program for efficient remote updates of files."
-VENDOR="Samba Team URL: http://samba.anu.edu.au/rsync/"
-BASEDIR=$BASEDIR
-ARCH=$ARCH
-VERSION=$VERSION
-CATEGORY=application
-CLASSES=none
-EOF_INFO
-
-## Build prototype file
-cat > $FAKE_ROOT/prototype << EOFPROTO
-i copyright=COPYING
-i pkginfo=pkginfo
-d none bin 0755 bin bin
-f none bin/rsync 0755 bin bin
-d none doc 0755 bin bin
-d none doc/$NAME 0755 bin bin
-f none doc/$NAME/README 0644 bin bin
-f none doc/$NAME/COPYING 0644 bin bin
-f none doc/$NAME/tech_report.pdf 0644 bin bin
-d none man 0755 bin bin
-d none man/man1 0755 bin bin
-f none man/man1/rsync.1 0644 bin bin
-d none man/man5 0755 bin bin
-f none man/man5/rsyncd.conf.5 0644 bin bin
-EOFPROTO
-
-## And now build the package.
-OUTPUTFILE=$PKGNAME-$VERSION-sol8-$ARCH-local.pkg
-echo "Building package.."
-echo FAKE_ROOT = $FAKE_ROOT
-cd $FAKE_ROOT
-pkgmk -d . -r . -f ./prototype -o
-pkgtrans -os . $OUTPUTFILE $PKGNAME
-
-mv $OUTPUTFILE ..
-cd ..
-
-# Comment this out if you want to see, which file structure has been created
-rm -rf $FAKE_ROOT
-

params.c

@@ -164,7 +164,7 @@ static int Continuation( char *line, int pos )
    */
   {
   pos--;
-  while( (pos >= 0) && isspace(((unsigned char *)line)[pos]) )
+  while( (pos >= 0) && isspace(line[pos]) )
      pos--;
 
   return( ((pos >= 0) && ('\\' == line[pos])) ? pos : -1 );
@@ -207,7 +207,7 @@ static BOOL Section( FILE *InFile, BOOL (*sfunc)(char *) )
     if( i > (bSize - 2) )
       {
       bSize += BUFR_INC;
-      bufr   = realloc_array( bufr, char, bSize );
+      bufr   = Realloc( bufr, bSize );
       if( NULL == bufr )
         {
         rprintf(FERROR, "%s Memory re-allocation failure.", func);
@@ -301,7 +301,7 @@ static BOOL Parameter( FILE *InFile, BOOL (*pfunc)(char *, char *), int c )
     if( i > (bSize - 2) )       /* Ensure there's space for next char.    */
       {
       bSize += BUFR_INC;
-      bufr   = realloc_array( bufr, char, bSize );
+      bufr   = Realloc( bufr, bSize );
       if( NULL == bufr )
         {
         rprintf(FERROR, "%s Memory re-allocation failure.", func) ;
@@ -366,7 +366,7 @@ static BOOL Parameter( FILE *InFile, BOOL (*pfunc)(char *, char *), int c )
     if( i > (bSize - 2) )       /* Make sure there's enough room. */
       {
       bSize += BUFR_INC;
-      bufr   = realloc_array( bufr, char, bSize );
+      bufr   = Realloc( bufr, bSize );
       if( NULL == bufr )
         {
         rprintf(FERROR, "%s Memory re-allocation failure.", func) ;
@@ -386,7 +386,7 @@ static BOOL Parameter( FILE *InFile, BOOL (*pfunc)(char *, char *), int c )
           c = 0;
         else
           {
-          for( end = i; (end >= 0) && isspace(((unsigned char *) bufr)[end]); end-- )
+          for( end = i; (end >= 0) && isspace(bufr[end]); end-- )
             ;
           c = getc( InFile );
           }
@@ -491,8 +491,8 @@ static FILE *OpenConfFile( char *FileName )
   OpenedFile = fopen( FileName, "r" );
   if( NULL == OpenedFile )
     {
-    rsyserr(FERROR, errno, "rsync: unable to open configuration file \"%s\"",
-	    safe_fname(FileName));
+    rprintf(FERROR,"%s Unable to open configuration file \"%s\":\n\t%s\n",
+	    func, FileName, strerror(errno));
     }
 
   return( OpenedFile );
@@ -530,7 +530,7 @@ BOOL pm_process( char *FileName,
   else                                        /* If we don't have a buffer   */
     {                                         /* allocate one, then parse,   */
     bSize = BUFR_INC;                         /* then free.                  */
-    bufr = new_array( char, bSize );
+    bufr = (char *)malloc( bSize );
     if( NULL == bufr )
       {
       rprintf(FERROR,"%s memory allocation failure.\n", func);

pipe.c

@@ -1,160 +0,0 @@
-/*  -*- c-file-style: "linux" -*-
- *
- * Copyright (C) 1996-2000 by Andrew Tridgell
- * Copyright (C) Paul Mackerras 1996
- * Copyright (C) 2001, 2002 by Martin Pool <mbp@samba.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "rsync.h"
-
-extern int am_sender;
-extern int am_server;
-extern int blocking_io;
-extern int orig_umask;
-extern int filesfrom_fd;
-
-/**
- * Create a child connected to use on stdin/stdout.
- *
- * This is derived from CVS code
- *
- * Note that in the child STDIN is set to blocking and STDOUT
- * is set to non-blocking. This is necessary as rsh relies on stdin being blocking
- *  and ssh relies on stdout being non-blocking
- *
- * If blocking_io is set then use blocking io on both fds. That can be
- * used to cope with badly broken rsh implementations like the one on
- * Solaris.
- **/
-pid_t piped_child(char **command, int *f_in, int *f_out)
-{
-	pid_t pid;
-	int to_child_pipe[2];
-	int from_child_pipe[2];
-
-	if (verbose >= 2) {
-		print_child_argv(command);
-	}
-
-	if (fd_pair(to_child_pipe) < 0 || fd_pair(from_child_pipe) < 0) {
-		rsyserr(FERROR, errno, "pipe");
-		exit_cleanup(RERR_IPC);
-	}
-
-	pid = do_fork();
-	if (pid == -1) {
-		rsyserr(FERROR, errno, "fork");
-		exit_cleanup(RERR_IPC);
-	}
-
-	if (pid == 0) {
-		if (dup2(to_child_pipe[0], STDIN_FILENO) < 0 ||
-		    close(to_child_pipe[1]) < 0 ||
-		    close(from_child_pipe[0]) < 0 ||
-		    dup2(from_child_pipe[1], STDOUT_FILENO) < 0) {
-			rsyserr(FERROR, errno, "Failed to dup/close");
-			exit_cleanup(RERR_IPC);
-		}
-		if (to_child_pipe[0] != STDIN_FILENO)
-			close(to_child_pipe[0]);
-		if (from_child_pipe[1] != STDOUT_FILENO)
-			close(from_child_pipe[1]);
-		umask(orig_umask);
-		set_blocking(STDIN_FILENO);
-		if (blocking_io > 0)
-			set_blocking(STDOUT_FILENO);
-		execvp(command[0], command);
-		rsyserr(FERROR, errno, "Failed to exec %s",
-			safe_fname(command[0]));
-		exit_cleanup(RERR_IPC);
-	}
-
-	if (close(from_child_pipe[1]) < 0 || close(to_child_pipe[0]) < 0) {
-		rsyserr(FERROR, errno, "Failed to close");
-		exit_cleanup(RERR_IPC);
-	}
-
-	*f_in = from_child_pipe[0];
-	*f_out = to_child_pipe[1];
-
-	return pid;
-}
-
-/* This function forks a child which calls child_main().  First,
- * however, it has to establish communication paths to and from the
- * newborn child.  It creates two socket pairs -- one for writing to
- * the child (from the parent) and one for reading from the child
- * (writing to the parent).  Since that's four socket ends, each
- * process has to close the two ends it doesn't need.  The remaining
- * two socket ends are retained for reading and writing.  In the
- * child, the STDIN and STDOUT file descriptors refer to these
- * sockets.  In the parent, the function arguments f_in and f_out are
- * set to refer to these sockets. */
-pid_t local_child(int argc, char **argv, int *f_in, int *f_out,
-		  int (*child_main)(int, char*[]))
-{
-	pid_t pid;
-	int to_child_pipe[2];
-	int from_child_pipe[2];
-
-	if (fd_pair(to_child_pipe) < 0 ||
-	    fd_pair(from_child_pipe) < 0) {
-		rsyserr(FERROR, errno, "pipe");
-		exit_cleanup(RERR_IPC);
-	}
-
-	pid = do_fork();
-	if (pid == -1) {
-		rsyserr(FERROR, errno, "fork");
-		exit_cleanup(RERR_IPC);
-	}
-
-	if (pid == 0) {
-		am_sender = !am_sender;
-		am_server = 1;
-
-		if (!am_sender)
-			filesfrom_fd = -1;
-
-		if (dup2(to_child_pipe[0], STDIN_FILENO) < 0 ||
-		    close(to_child_pipe[1]) < 0 ||
-		    close(from_child_pipe[0]) < 0 ||
-		    dup2(from_child_pipe[1], STDOUT_FILENO) < 0) {
-			rsyserr(FERROR, errno, "Failed to dup/close");
-			exit_cleanup(RERR_IPC);
-		}
-		if (to_child_pipe[0] != STDIN_FILENO)
-			close(to_child_pipe[0]);
-		if (from_child_pipe[1] != STDOUT_FILENO)
-			close(from_child_pipe[1]);
-		child_main(argc, argv);
-	}
-
-	if (!am_sender)
-		filesfrom_fd = -1;
-
-	if (close(from_child_pipe[1]) < 0 ||
-	    close(to_child_pipe[0]) < 0) {
-		rsyserr(FERROR, errno, "Failed to close");
-		exit_cleanup(RERR_IPC);
-	}
-
-	*f_in = from_child_pipe[0];
-	*f_out = to_child_pipe[1];
-
-	return pid;
-}

popt/.cvsignore

@@ -5,3 +5,5 @@ config.h
 config.log
 config.status
 dummy
+rsync
+zlib/dummy

popt/CHANGES

@@ -1,7 +1,4 @@
-1.5 -> 1.6
-	- add ability to perform callbacks for every, not just first, match.
-
-1.3 -> 1.5
+1.3 ->
 	- heavy dose of const's
 	- poptParseArgvString() now NULL terminates the list
 

popt/README

@@ -5,7 +5,7 @@ to getopt(3), it contains a number of enhancements, including:
 	2) popt can parse arbitrary argv[] style arrays while 
 	   getopt(2) makes this quite difficult
 	3) popt allows users to alias command line arguments
-	4) popt provides convience functions for parsing strings
+	4) popt provides convience functions for parsting strings
 	   into argv[] style arrays
 
 popt is used by rpm, the Red Hat install program, and many other Red Hat

popt/README.rsync

@@ -1,4 +0,0 @@
-This is a perfectly ordinary copy of libpopt.  It is only used on platforms
-that do not have a sufficiently up-to-date copy of their own.  If you build
-rsync on a platform which has popt, this directory should not be used.  (You
-can control that using the --with-included-popt configure flag.)

popt/config.log

@@ -0,0 +1,104 @@
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+configure:592: checking host system type
+configure:613: checking target system type
+configure:631: checking build system type
+configure:665: checking for a BSD compatible install
+configure:718: checking whether build environment is sane
+configure:775: checking whether make sets ${MAKE}
+configure:821: checking for working aclocal
+configure:834: checking for working autoconf
+configure:847: checking for working automake
+configure:860: checking for working autoheader
+configure:873: checking for working makeinfo
+configure:891: checking for gcc
+configure:1004: checking whether the C compiler (gcc  ) works
+configure:1020: gcc -o conftest    conftest.c  1>&5
+configure:1046: checking whether the C compiler (gcc  ) is a cross-compiler
+configure:1051: checking whether we are using GNU C
+configure:1079: checking whether gcc accepts -g
+configure:1111: checking for POSIXized ISC
+configure:1135: checking for gcc
+configure:1248: checking whether the C compiler (gcc -g -O2 ) works
+configure:1264: gcc -o conftest -g -O2   conftest.c  1>&5
+configure:1290: checking whether the C compiler (gcc -g -O2 ) is a cross-compiler
+configure:1295: checking whether we are using GNU C
+configure:1323: checking whether gcc accepts -g
+configure:1355: checking how to run the C preprocessor
+configure:1436: checking whether gcc needs -traditional
+configure:1485: checking for gcc option to accept ANSI C
+configure:1564: checking for function prototypes
+configure:1795: checking for ranlib
+configure:1834: checking for ld used by GCC
+configure:1896: checking if the linker (/usr/bin/ld) is GNU ld
+configure:1912: checking for BSD-compatible nm
+configure:1948: checking whether ln -s works
+ltconfig:603: checking for object suffix
+ltconfig:604: gcc -c -g -O2  conftest.c 1>&5
+ltconfig:629: checking for executable suffix
+ltconfig:630: gcc -o conftest -g -O2   conftest.c  1>&5
+ltconfig:776: checking if gcc PIC flag -fPIC works
+ltconfig:777: gcc -c -g -O2 -fPIC -DPIC  conftest.c 1>&5
+ltconfig:829: checking if gcc supports -c -o file.o
+ltconfig:830: gcc -c -g -O2 -o out/conftest2.o  conftest.c 1>&5
+ltconfig:862: checking if gcc supports -c -o file.lo
+ltconfig:863: gcc -c -g -O2 -c -o conftest.lo  conftest.c 1>&5
+ltconfig:914: checking if gcc supports -fno-rtti -fno-exceptions
+ltconfig:915: gcc -c -g -O2 -fno-rtti -fno-exceptions -c conftest.c  conftest.c 1>&5
+ltconfig:958: checking if gcc static flag -static works
+ltconfig:959: gcc -o conftest -g -O2   -static conftest.c  1>&5
+GNU ld version 2.10.91 (with BFD 2.10.91.0.2)
+ltconfig:1635: checking if global_symbol_pipe works
+ltconfig:1636: gcc -c -g -O2  conftest.c 1>&5
+ltconfig:1639: eval "/usr/bin/nm -B conftest.o | sed -n -e 's/^.*[ 	]\([ABCDGISTW]\)[ 	][ 	]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' > conftest.nm"
+ltconfig:1691: gcc -o conftest -g -O2 -fno-builtin -fno-rtti -fno-exceptions   conftest.c conftstm.o 1>&5
+configure:2150: checking for a BSD compatible install
+configure:2231: checking for alloca.h
+configure:2231: checking for libintl.h
+configure:2231: checking for mcheck.h
+configure:2231: checking for unistd.h
+configure:2268: checking for /usr/ucblib in LIBS
+configure:2284: checking for GNU xgettext
+configure:2294: checking for strerror
+configure:2294: checking for mtrace
+configure:2347: checking for setreuid
+configure:2438: checking for working const
+configure:2513: checking for inline
+configure:2553: checking for off_t
+configure:2586: checking for size_t
+configure:2621: checking for working alloca.h
+configure:2654: checking for alloca
+configure:2856: checking for unistd.h
+configure:2895: checking for getpagesize
+configure:2948: checking for working mmap
+configure:3124: checking for argz.h
+configure:3124: checking for limits.h
+configure:3124: checking for locale.h
+configure:3124: checking for nl_types.h
+configure:3124: checking for malloc.h
+configure:3124: checking for string.h
+configure:3124: checking for unistd.h
+configure:3124: checking for sys/param.h
+configure:3164: checking for getcwd
+configure:3164: checking for munmap
+configure:3164: checking for putenv
+configure:3164: checking for setenv
+configure:3164: checking for setlocale
+configure:3164: checking for strchr
+configure:3164: checking for strcasecmp
+configure:3164: checking for strdup
+configure:3164: checking for __argz_count
+configure:3164: checking for __argz_stringify
+configure:3164: checking for __argz_next
+configure:3283: checking for LC_MESSAGES
+configure:3316: checking whether NLS is requested
+configure:3336: checking whether included gettext is requested
+configure:3355: checking for libintl.h
+configure:3382: checking for gettext in libc
+configure:3508: checking for msgfmt
+configure:3542: checking for dcgettext
+configure:3597: checking for gmsgfmt
+configure:3633: checking for xgettext
+configure:3673: gcc -o conftest -Wall -g -O2   conftest.c  1>&5
+configure:4131: checking for catalogs to be installed

popt/findme.c

@@ -1,10 +1,6 @@
-/** \ingroup popt
- * \file popt/findme.c
- */
-
-/* (C) 1998-2000 Red Hat, Inc. -- Licensing details are in the COPYING
+/* (C) 1998 Red Hat Software, Inc. -- Licensing details are in the COPYING
    file accompanying popt source distributions, available from 
-   ftp://ftp.rpm.org/pub/rpm/dist. */
+   ftp://ftp.redhat.com/pub/code/popt */
 
 #include "system.h"
 #include "findme.h"
@@ -13,38 +9,38 @@ const char * findProgramPath(const char * argv0) {
     char * path = getenv("PATH");
     char * pathbuf;
     char * start, * chptr;
-    char * buf;
+    char * buf, *local = NULL;
 
-    if (argv0 == NULL) return NULL;	/* XXX can't happen */
-    /* If there is a / in the argv[0], it has to be an absolute path */
+    /* If there is a / in the argv[0], it has to be an absolute
+       path */
     if (strchr(argv0, '/'))
 	return xstrdup(argv0);
 
-    if (path == NULL) return NULL;
+    if (!path) return NULL;
 
-    start = pathbuf = alloca(strlen(path) + 1);
-    buf = malloc(strlen(path) + strlen(argv0) + sizeof("/"));
-    if (buf == NULL) return NULL;	/* XXX can't happen */
+    local = start = pathbuf = malloc(strlen(path) + 1);
+    buf = malloc(strlen(path) + strlen(argv0) + 2);
     strcpy(pathbuf, path);
 
     chptr = NULL;
-    /*@-branchstate@*/
     do {
 	if ((chptr = strchr(start, ':')))
 	    *chptr = '\0';
 	sprintf(buf, "%s/%s", start, argv0);
 
-	if (!access(buf, X_OK))
-	    return buf;
+	if (!access(buf, X_OK)) {
+		if (local) free(local);
+		return buf;
+	}
 
 	if (chptr) 
 	    start = chptr + 1;
 	else
 	    start = NULL;
     } while (start && *start);
-    /*@=branchstate@*/
 
     free(buf);
+    if (local) free(local);
 
     return NULL;
 }

popt/findme.h

@@ -1,20 +1,10 @@
-/** \ingroup popt
- * \file popt/findme.h
- */
-
-/* (C) 1998-2000 Red Hat, Inc. -- Licensing details are in the COPYING
+/* (C) 1998 Red Hat Software, Inc. -- Licensing details are in the COPYING
    file accompanying popt source distributions, available from 
-   ftp://ftp.rpm.org/pub/rpm/dist. */
+   ftp://ftp.redhat.com/pub/code/popt */
 
 #ifndef H_FINDME
 #define H_FINDME
 
-/**
- * Return absolute path to executable by searching PATH.
- * @param argv0		name of executable
- * @return		(malloc'd) absolute path to executable (or NULL)
- */
-/*@null@*/ const char * findProgramPath(/*@null@*/ const char * argv0)
-	/*@*/;
+const char * findProgramPath(const char * argv0);
 
 #endif

popt/popt.h

@@ -1,444 +1,128 @@
-/** \file popt/popt.h
- * \ingroup popt
- */
-
-/* (C) 1998-2000 Red Hat, Inc. -- Licensing details are in the COPYING
+/* (C) 1998 Red Hat Software, Inc. -- Licensing details are in the COPYING
    file accompanying popt source distributions, available from 
-   ftp://ftp.rpm.org/pub/rpm/dist. */
+   ftp://ftp.redhat.com/pub/code/popt */
 
 #ifndef H_POPT
 #define H_POPT
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 #include <stdio.h>			/* for FILE * */
 
 #define POPT_OPTION_DEPTH	10
 
-/** \ingroup popt
- * \name Arg type identifiers
- */
-/*@{*/
-#define POPT_ARG_NONE		0	/*!< no arg */
-#define POPT_ARG_STRING		1	/*!< arg will be saved as string */
-#define POPT_ARG_INT		2	/*!< arg will be converted to int */
-#define POPT_ARG_LONG		3	/*!< arg will be converted to long */
-#define POPT_ARG_INCLUDE_TABLE	4	/*!< arg points to table */
-#define POPT_ARG_CALLBACK	5	/*!< table-wide callback... must be
+#define POPT_ARG_NONE		0
+#define POPT_ARG_STRING		1
+#define POPT_ARG_INT		2
+#define POPT_ARG_LONG		3
+#define POPT_ARG_INCLUDE_TABLE	4	/* arg points to table */
+#define POPT_ARG_CALLBACK	5	/* table-wide callback... must be
 					   set first in table; arg points 
 					   to callback, descrip points to 
 					   callback data to pass */
-#define POPT_ARG_INTL_DOMAIN    6       /*!< set the translation domain
+#define POPT_ARG_INTL_DOMAIN    6       /* set the translation domain
 					   for this table and any
 					   included tables; arg points
 					   to the domain string */
-#define POPT_ARG_VAL		7	/*!< arg should take value val */
-#define	POPT_ARG_FLOAT		8	/*!< arg will be converted to float */
-#define	POPT_ARG_DOUBLE		9	/*!< arg will be converted to double */
-
+#define POPT_ARG_VAL		7	/* arg should take value val */
 #define POPT_ARG_MASK		0x0000FFFF
-/*@}*/
-
-/** \ingroup popt
- * \name Arg modifiers
- */
-/*@{*/
-#define POPT_ARGFLAG_ONEDASH	0x80000000  /*!< allow -longoption */
-#define POPT_ARGFLAG_DOC_HIDDEN 0x40000000  /*!< don't show in help/usage */
-#define POPT_ARGFLAG_STRIP	0x20000000  /*!< strip this arg from argv(only applies to long args) */
-#define	POPT_ARGFLAG_OPTIONAL	0x10000000  /*!< arg may be missing */
-
-#define	POPT_ARGFLAG_OR		0x08000000  /*!< arg will be or'ed */
-#define	POPT_ARGFLAG_NOR	0x09000000  /*!< arg will be nor'ed */
-#define	POPT_ARGFLAG_AND	0x04000000  /*!< arg will be and'ed */
-#define	POPT_ARGFLAG_NAND	0x05000000  /*!< arg will be nand'ed */
-#define	POPT_ARGFLAG_XOR	0x02000000  /*!< arg will be xor'ed */
-#define	POPT_ARGFLAG_NOT	0x01000000  /*!< arg will be negated */
-#define POPT_ARGFLAG_LOGICALOPS \
-        (POPT_ARGFLAG_OR|POPT_ARGFLAG_AND|POPT_ARGFLAG_XOR)
-
-#define	POPT_BIT_SET	(POPT_ARG_VAL|POPT_ARGFLAG_OR)
-					/*!< set arg bit(s) */
-#define	POPT_BIT_CLR	(POPT_ARG_VAL|POPT_ARGFLAG_NAND)
-					/*!< clear arg bit(s) */
-
-#define	POPT_ARGFLAG_SHOW_DEFAULT 0x00800000 /*!< show default value in --help */
-
-/*@}*/
-
-/** \ingroup popt
- * \name Callback modifiers
- */
-/*@{*/
-#define POPT_CBFLAG_PRE		0x80000000  /*!< call the callback before parse */
-#define POPT_CBFLAG_POST	0x40000000  /*!< call the callback after parse */
-#define POPT_CBFLAG_INC_DATA	0x20000000  /*!< use data from the include line,
+#define POPT_ARGFLAG_ONEDASH	0x80000000  /* allow -longoption */
+#define POPT_ARGFLAG_DOC_HIDDEN 0x40000000  /* don't show in help/usage */
+#define POPT_ARGFLAG_STRIP	0x20000000  /* strip this arg from argv (only applies to long args) */
+#define POPT_CBFLAG_PRE		0x80000000  /* call the callback before parse */
+#define POPT_CBFLAG_POST	0x40000000  /* call the callback after parse */
+#define POPT_CBFLAG_INC_DATA	0x20000000  /* use data from the include line,
 					       not the subtable */
-#define POPT_CBFLAG_SKIPOPTION	0x10000000  /*!< don't callback with option */
-#define POPT_CBFLAG_CONTINUE	0x08000000  /*!< continue callbacks with option */
-/*@}*/
 
-/** \ingroup popt
- * \name Error return values
- */
-/*@{*/
-#define POPT_ERROR_NOARG	-10	/*!< missing argument */
-#define POPT_ERROR_BADOPT	-11	/*!< unknown option */
-#define POPT_ERROR_OPTSTOODEEP	-13	/*!< aliases nested too deeply */
-#define POPT_ERROR_BADQUOTE	-15	/*!< error in paramter quoting */
-#define POPT_ERROR_ERRNO	-16	/*!< errno set, use strerror(errno) */
-#define POPT_ERROR_BADNUMBER	-17	/*!< invalid numeric value */
-#define POPT_ERROR_OVERFLOW	-18	/*!< number too large or too small */
-#define	POPT_ERROR_BADOPERATION	-19	/*!< mutually exclusive logical operations requested */
-#define	POPT_ERROR_NULLARG	-20	/*!< opt->arg should not be NULL */
-#define	POPT_ERROR_MALLOC	-21	/*!< memory allocation failed */
-/*@}*/
+#define POPT_ERROR_NOARG	-10
+#define POPT_ERROR_BADOPT	-11
+#define POPT_ERROR_OPTSTOODEEP	-13
+#define POPT_ERROR_BADQUOTE	-15	/* only from poptParseArgString() */
+#define POPT_ERROR_ERRNO	-16	/* only from poptParseArgString() */
+#define POPT_ERROR_BADNUMBER	-17
+#define POPT_ERROR_OVERFLOW	-18
 
-/** \ingroup popt
- * \name poptBadOption() flags
- */
-/*@{*/
-#define POPT_BADOPTION_NOALIAS  (1 << 0)  /*!< don't go into an alias */
-/*@}*/
+/* poptBadOption() flags */
+#define POPT_BADOPTION_NOALIAS  (1 << 0)  /* don't go into an alias */
 
-/** \ingroup popt
- * \name poptGetContext() flags
- */
-/*@{*/
-#define POPT_CONTEXT_NO_EXEC	(1 << 0)  /*!< ignore exec expansions */
-#define POPT_CONTEXT_KEEP_FIRST	(1 << 1)  /*!< pay attention to argv[0] */
-#define POPT_CONTEXT_POSIXMEHARDER (1 << 2) /*!< options can't follow args */
-#define POPT_CONTEXT_ARG_OPTS	(1 << 4) /*!< return args as options with value 0 */
-/*@}*/
+/* poptGetContext() flags */
+#define POPT_CONTEXT_NO_EXEC	(1 << 0)  /* ignore exec expansions */
+#define POPT_CONTEXT_KEEP_FIRST	(1 << 1)  /* pay attention to argv[0] */
+#define POPT_CONTEXT_POSIXMEHARDER (1 << 2) /* options can't follow args */
 
-/** \ingroup popt
- */
 struct poptOption {
-/*@observer@*/ /*@null@*/ const char * longName; /*!< may be NULL */
-    char shortName;			/*!< may be '\0' */
+    /*@observer@*/ /*@null@*/ const char * longName;	/* may be NULL */
+    char shortName;		/* may be '\0' */
     int argInfo;
-/*@shared@*/ /*@null@*/ void * arg;	/*!< depends on argInfo */
-    int val;			/*!< 0 means don't return, just update flag */
-/*@observer@*/ /*@null@*/ const char * descrip;	/*!< description for autohelp -- may be NULL */
-/*@observer@*/ /*@null@*/ const char * argDescrip; /*!< argument description for autohelp */
+    /*@shared@*/ /*@null@*/ void * arg;		/* depends on argInfo */
+    int val;			/* 0 means don't return, just update flag */
+    /*@shared@*/ /*@null@*/ const char * descrip;	/* description for autohelp -- may be NULL */
+    /*@shared@*/ /*@null@*/ const char * argDescrip;	/* argument description for autohelp */
 };
 
-/** \ingroup popt
- * A popt alias argument for poptAddAlias().
- */
 struct poptAlias {
-/*@owned@*/ /*@null@*/ const char * longName;	/*!< may be NULL */
-    char shortName;		/*!< may be '\0' */
+    /*@owned@*/ /*@null@*/ const char * longName;	/* may be NULL */
+    char shortName;		/* may be '\0' */
     int argc;
-/*@owned@*/ const char ** argv;	/*!< must be free()able */
+    /*@owned@*/ const char ** argv;		/* must be free()able */
 };
 
-/** \ingroup popt
- * A popt alias or exec argument for poptAddItem().
- */
-typedef struct poptItem_s {
-    struct poptOption option;	/*!< alias/exec name(s) and description. */
-    int argc;			/*!< (alias) no. of args. */
-/*@owned@*/ const char ** argv;	/*!< (alias) args, must be free()able. */
-} * poptItem;
-
-/** \ingroup popt
- * \name Auto-generated help/usage
- */
-/*@{*/
-
-/**
- * Empty table marker to enable displaying popt alias/exec options.
- */
-/*@observer@*/ /*@checked@*/
-extern struct poptOption poptAliasOptions[];
-#define POPT_AUTOALIAS { NULL, '\0', POPT_ARG_INCLUDE_TABLE, poptAliasOptions, \
-			0, "Options implemented via popt alias/exec:", NULL },
-
-/**
- * Auto help table options.
- */
-/*@observer@*/ /*@checked@*/
 extern struct poptOption poptHelpOptions[];
 #define POPT_AUTOHELP { NULL, '\0', POPT_ARG_INCLUDE_TABLE, poptHelpOptions, \
-			0, "Help options:", NULL },
+			0, "Help options", NULL },
 
-#define POPT_TABLEEND { NULL, '\0', 0, 0, 0, NULL, NULL }
-/*@}*/
-
-/** \ingroup popt
- */
-typedef /*@abstract@*/ struct poptContext_s * poptContext;
-
-/** \ingroup popt
- */
+typedef struct poptContext_s * poptContext;
 #ifndef __cplusplus
-/*@-typeuse@*/
 typedef struct poptOption * poptOption;
-/*@=typeuse@*/
 #endif
 
 enum poptCallbackReason { POPT_CALLBACK_REASON_PRE, 
 			  POPT_CALLBACK_REASON_POST,
 			  POPT_CALLBACK_REASON_OPTION };
+typedef void (*poptCallbackType)(poptContext con, 
+				 enum poptCallbackReason reason,
+			         const struct poptOption * opt,
+				 const char * arg, const void * data);
 
-#ifdef __cplusplus
-extern "C" {
-#endif
-/*@-type@*/
+/*@only@*/ poptContext poptGetContext(/*@keep@*/ const char * name,
+		int argc, /*@keep@*/ const char ** argv,
+		/*@keep@*/ const struct poptOption * options, int flags);
+void poptResetContext(poptContext con);
 
-/** \ingroup popt
- * Table callback prototype.
- * @param con		context
- * @param reason	reason for callback
- * @param opt		option that triggered callback
- * @param arg		@todo Document.
- * @param data		@todo Document.
- */
-typedef void (*poptCallbackType) (poptContext con, 
-		enum poptCallbackReason reason,
-		/*@null@*/ const struct poptOption * opt,
-		/*@null@*/ const char * arg,
-		/*@null@*/ const void * data)
-	/*@*/;
+/* returns 'val' element, -1 on last item, POPT_ERROR_* on error */
+int poptGetNextOpt(poptContext con);
+/* returns NULL if no argument is available */
+/*@observer@*/ /*@null@*/ const char * poptGetOptArg(poptContext con);
+/* returns NULL if no more options are available */
+/*@observer@*/ /*@null@*/ const char * poptGetArg(poptContext con);
+/*@observer@*/ /*@null@*/ const char * poptPeekArg(poptContext con);
+/*@observer@*/ /*@null@*/ const char ** poptGetArgs(poptContext con);
+/* returns the option which caused the most recent error */
+/*@observer@*/ const char * poptBadOption(poptContext con, int flags);
+void poptFreeContext( /*@only@*/ poptContext con);
+int poptStuffArgs(poptContext con, /*@keep@*/ const char ** argv);
+int poptAddAlias(poptContext con, struct poptAlias alias, int flags);
+int poptReadConfigFile(poptContext con, const char * fn);
+/* like above, but reads /etc/popt and $HOME/.popt along with environment 
+   vars */
+int poptReadDefaultConfig(poptContext con, int useEnv);
+/* argv should be freed -- this allows ', ", and \ quoting, but ' is treated
+   the same as " and both may include \ quotes */
+int poptDupArgv(int argc, const char **argv,
+		/*@out@*/ int * argcPtr, /*@out@*/ const char *** argvPtr);
+int poptParseArgvString(const char * s,
+		/*@out@*/ int * argcPtr, /*@out@*/ const char *** argvPtr);
+/*@observer@*/ const char *const poptStrerror(const int error);
+void poptSetExecPath(poptContext con, const char * path, int allowAbsolute);
+void poptPrintHelp(poptContext con, FILE * f, int flags);
+void poptPrintUsage(poptContext con, FILE * f, int flags);
+void poptSetOtherOptionHelp(poptContext con, const char * text);
+/*@observer@*/ const char * poptGetInvocationName(poptContext con);
+/* shuffles argv pointers to remove stripped args, returns new argc */
+int poptStrippedArgv(poptContext con, int argc, char **argv);
 
-/** \ingroup popt
- * Initialize popt context.
- * @param name
- * @param argc		no. of arguments
- * @param argv		argument array
- * @param options	address of popt option table
- * @param flags		or'd POPT_CONTEXT_* bits
- * @return		initialized popt context
- */
-/*@only@*/ /*@null@*/ poptContext poptGetContext(
-		/*@dependent@*/ /*@keep@*/ const char * name,
-		int argc, /*@dependent@*/ /*@keep@*/ const char ** argv,
-		/*@dependent@*/ /*@keep@*/ const struct poptOption * options,
-		int flags)
-	/*@*/;
-
-/** \ingroup popt
- * Reinitialize popt context.
- * @param con		context
- */
-void poptResetContext(/*@null@*/poptContext con)
-	/*@modifies con @*/;
-
-/** \ingroup popt
- * Return value of next option found.
- * @param con		context
- * @return		next option val, -1 on last item, POPT_ERROR_* on error
- */
-int poptGetNextOpt(/*@null@*/poptContext con)
-	/*@globals fileSystem@*/
-	/*@modifies con, fileSystem @*/;
-
-/*@-redecl@*/
-/** \ingroup popt
- * Return next option argument (if any).
- * @param con		context
- * @return		option argument, NULL if no more options are available
- */
-/*@observer@*/ /*@null@*/ const char * poptGetOptArg(/*@null@*/poptContext con)
-	/*@modifies con @*/;
-
-/** \ingroup popt
- * Return current option's argument.
- * @param con		context
- * @return		option argument, NULL if no more options are available
- */
-/*@observer@*/ /*@null@*/ const char * poptGetArg(/*@null@*/poptContext con)
-	/*@modifies con @*/;
-
-/** \ingroup popt
- * Peek at current option's argument.
- * @param con		context
- * @return		option argument
- */
-/*@observer@*/ /*@null@*/ const char * poptPeekArg(/*@null@*/poptContext con)
-	/*@*/;
-
-/** \ingroup popt
- * Return remaining arguments.
- * @param con		context
- * @return		argument array, terminated with NULL
- */
-/*@observer@*/ /*@null@*/ const char ** poptGetArgs(/*@null@*/poptContext con)
-	/*@modifies con @*/;
-
-/** \ingroup popt
- * Return the option which caused the most recent error.
- * @param con		context
- * @return		offending option
- */
-/*@observer@*/ const char * poptBadOption(/*@null@*/poptContext con, int flags)
-	/*@*/;
-/*@=redecl@*/
-
-/** \ingroup popt
- * Destroy context.
- * @param con		context
- * @return		NULL always
- */
-/*@null@*/ poptContext poptFreeContext( /*@only@*/ /*@null@*/ poptContext con)
-	/*@modifies con @*/;
-
-/** \ingroup popt
- * Add arguments to context.
- * @param con		context
- * @param argv		argument array, NULL terminated
- * @return		0 on success, POPT_ERROR_OPTSTOODEEP on failure
- */
-int poptStuffArgs(poptContext con, /*@keep@*/ const char ** argv)
-	/*@modifies con @*/;
-
-/** \ingroup popt
- * Add alias to context.
- * @todo Pass alias by reference, not value.
- * @deprecated Use poptAddItem instead.
- * @param con		context
- * @param alias		alias to add
- * @param flags		(unused)
- * @return		0 on success
- */
-/*@unused@*/
-int poptAddAlias(poptContext con, struct poptAlias alias, int flags)
-	/*@modifies con @*/;
-
-/** \ingroup popt
- * Add alias/exec item to context.
- * @param con		context
- * @param item		alias/exec item to add
- * @param flags		0 for alias, 1 for exec
- * @return		0 on success
- */
-int poptAddItem(poptContext con, poptItem newItem, int flags)
-	/*@modifies con @*/;
-
-/** \ingroup popt
- * Read configuration file.
- * @param con		context
- * @param fn		file name to read
- * @return		0 on success, POPT_ERROR_ERRNO on failure
- */
-int poptReadConfigFile(poptContext con, const char * fn)
-	/*@globals fileSystem@*/
-	/*@modifies fileSystem,
-		con->execs, con->numExecs @*/;
-
-/** \ingroup popt
- * Read default configuration from /etc/popt and $HOME/.popt.
- * @param con		context
- * @param useEnv	(unused)
- * @return		0 on success, POPT_ERROR_ERRNO on failure
- */
-int poptReadDefaultConfig(poptContext con, /*@unused@*/ int useEnv)
-	/*@globals fileSystem@*/
-	/*@modifies fileSystem,
-		con->execs, con->numExecs @*/;
-
-/** \ingroup popt
- * Duplicate an argument array.
- * @note: The argument array is malloc'd as a single area, so only argv must
- * be free'd.
- *
- * @param argc		no. of arguments
- * @param argv		argument array
- * @retval argcPtr	address of returned no. of arguments
- * @retval argvPtr	address of returned argument array
- * @return		0 on success, POPT_ERROR_NOARG on failure
- */
-int poptDupArgv(int argc, /*@null@*/ const char **argv,
-		/*@null@*/ /*@out@*/ int * argcPtr,
-		/*@null@*/ /*@out@*/ const char *** argvPtr)
-	/*@modifies *argcPtr, *argvPtr @*/;
-
-/** \ingroup popt
- * Parse a string into an argument array.
- * The parse allows ', ", and \ quoting, but ' is treated the same as " and
- * both may include \ quotes.
- * @note: The argument array is malloc'd as a single area, so only argv must
- * be free'd.
- *
- * @param s		string to parse
- * @retval argcPtr	address of returned no. of arguments
- * @retval argvPtr	address of returned argument array
- */
-int poptParseArgvString(const unsigned char * s,
-		/*@out@*/ int * argcPtr, /*@out@*/ const char *** argvPtr)
-	/*@modifies *argcPtr, *argvPtr @*/;
-
-/** \ingroup popt
- * Return formatted error string for popt failure.
- * @param error		popt error
- * @return		error string
- */
-/*@-redecl@*/
-/*@observer@*/ const char * poptStrerror(const int error)
-	/*@*/;
-/*@=redecl@*/
-
-/** \ingroup popt
- * Limit search for executables.
- * @param con		context
- * @param path		single path to search for executables
- * @param allowAbsolute	absolute paths only?
- */
-void poptSetExecPath(poptContext con, const char * path, int allowAbsolute)
-	/*@modifies con @*/;
-
-/** \ingroup popt
- * Print detailed description of options.
- * @param con		context
- * @param fp		ouput file handle
- * @param flags		(unused)
- */
-void poptPrintHelp(poptContext con, FILE * fp, /*@unused@*/ int flags)
-	/*@globals fileSystem @*/
-	/*@modifies *fp, fileSystem @*/;
-
-/** \ingroup popt
- * Print terse description of options.
- * @param con		context
- * @param fp		ouput file handle
- * @param flags		(unused)
- */
-void poptPrintUsage(poptContext con, FILE * fp, /*@unused@*/ int flags)
-	/*@globals fileSystem @*/
-	/*@modifies *fp, fileSystem @*/;
-
-/** \ingroup popt
- * Provide text to replace default "[OPTION...]" in help/usage output.
- * @param con		context
- * @param text		replacement text
- */
-/*@-fcnuse@*/
-void poptSetOtherOptionHelp(poptContext con, const char * text)
-	/*@modifies con @*/;
-/*@=fcnuse@*/
-
-/** \ingroup popt
- * Return argv[0] from context.
- * @param con		context
- * @return		argv[0]
- */
-/*@-redecl -fcnuse@*/
-/*@observer@*/ const char * poptGetInvocationName(poptContext con)
-	/*@*/;
-/*@=redecl =fcnuse@*/
-
-/** \ingroup popt
- * Shuffle argv pointers to remove stripped args, returns new argc.
- * @param con		context
- * @param argc		no. of args
- * @param argv		arg vector
- * @return		new argc
- */
-/*@-fcnuse@*/
-int poptStrippedArgv(poptContext con, int argc, char ** argv)
-	/*@modifies *argv @*/;
-/*@=fcnuse@*/
-
-/*@=type@*/
 #ifdef  __cplusplus
 }
 #endif

popt/poptconfig.c

@@ -1,144 +1,101 @@
-/** \ingroup popt
- * \file popt/poptconfig.c
- */
-
-/* (C) 1998-2000 Red Hat, Inc. -- Licensing details are in the COPYING
+/* (C) 1998 Red Hat Software, Inc. -- Licensing details are in the COPYING
    file accompanying popt source distributions, available from 
-   ftp://ftp.rpm.org/pub/rpm/dist. */
+   ftp://ftp.redhat.com/pub/code/popt */
 
 #include "system.h"
 #include "poptint.h"
 
-/*@-compmempass@*/	/* FIX: item->option.longName kept, not dependent. */
-static void configLine(poptContext con, unsigned char * line)
-	/*@modifies con @*/
-{
-    /*@-type@*/
+static void configLine(poptContext con, char * line) {
     int nameLength = strlen(con->appName);
-    /*@=type@*/
-    const char * entryType;
-    const char * opt;
-    poptItem item = (poptItem) alloca(sizeof(*item));
-    int i, j;
+    char * opt;
+    struct poptAlias alias;
+    char * entryType;
+    char * longName = NULL;
+    char shortName = '\0';
     
-    memset(item, 0, sizeof(*item));
-
-    /*@-type@*/
     if (strncmp(line, con->appName, nameLength)) return;
-    /*@=type@*/
-
     line += nameLength;
-    if (*line == '\0' || !isspace(*line)) return;
-
-    while (*line != '\0' && isspace(*line)) line++;
+    if (!*line || !isspace(*line)) return;
+    while (*line && isspace(*line)) line++;
     entryType = line;
-    while (*line == '\0' || !isspace(*line)) line++;
-    *line++ = '\0';
 
-    while (*line != '\0' && isspace(*line)) line++;
-    if (*line == '\0') return;
+    while (!*line || !isspace(*line)) line++;
+    *line++ = '\0';
+    while (*line && isspace(*line)) line++;
+    if (!*line) return;
     opt = line;
-    while (*line == '\0' || !isspace(*line)) line++;
+
+    while (!*line || !isspace(*line)) line++;
     *line++ = '\0';
+    while (*line && isspace(*line)) line++;
+    if (!*line) return;
 
-    while (*line != '\0' && isspace(*line)) line++;
-    if (*line == '\0') return;
-
-    /*@-temptrans@*/ /* FIX: line alias is saved */
     if (opt[0] == '-' && opt[1] == '-')
-	item->option.longName = opt + 2;
-    else if (opt[0] == '-' && opt[2] == '\0')
-	item->option.shortName = opt[1];
-    /*@=temptrans@*/
+	longName = opt + 2;
+    else if (opt[0] == '-' && !opt[2])
+	shortName = opt[1];
 
-    if (poptParseArgvString(line, &item->argc, &item->argv)) return;
+    if (!strcmp(entryType, "alias")) {
+	if (poptParseArgvString(line, &alias.argc, &alias.argv)) return;
+	alias.longName = longName, alias.shortName = shortName;
+	poptAddAlias(con, alias, 0);
+    } else if (!strcmp(entryType, "exec")) {
+	con->execs = realloc(con->execs,
+				sizeof(*con->execs) * (con->numExecs + 1));
+	if (longName)
+	    con->execs[con->numExecs].longName = xstrdup(longName);
+	else
+	    con->execs[con->numExecs].longName = NULL;
 
-    /*@-modobserver@*/
-    item->option.argInfo = POPT_ARGFLAG_DOC_HIDDEN;
-    for (i = 0, j = 0; i < item->argc; i++, j++) {
-	const char * f;
-	if (!strncmp(item->argv[i], "--POPTdesc=", sizeof("--POPTdesc=")-1)) {
-	    f = item->argv[i] + sizeof("--POPTdesc=");
-	    if (f[0] == '$' && f[1] == '"') f++;
-	    item->option.descrip = f;
-	    item->option.argInfo &= ~POPT_ARGFLAG_DOC_HIDDEN;
-	    j--;
-	} else
-	if (!strncmp(item->argv[i], "--POPTargs=", sizeof("--POPTargs=")-1)) {
-	    f = item->argv[i] + sizeof("--POPTargs=");
-	    if (f[0] == '$' && f[1] == '"') f++;
-	    item->option.argDescrip = f;
-	    item->option.argInfo &= ~POPT_ARGFLAG_DOC_HIDDEN;
-	    item->option.argInfo |= POPT_ARG_STRING;
-	    j--;
-	} else
-	if (j != i)
-	    item->argv[j] = item->argv[i];
-    }
-    if (j != i) {
-	item->argv[j] = NULL;
-	item->argc = j;
-    }
-    /*@=modobserver@*/
+	con->execs[con->numExecs].shortName = shortName;
+	con->execs[con->numExecs].script = xstrdup(line);
 	
-    /*@-nullstate@*/ /* FIX: item->argv[] may be NULL */
-    if (!strcmp(entryType, "alias"))
-	(void) poptAddItem(con, item, 0);
-    else if (!strcmp(entryType, "exec"))
-	(void) poptAddItem(con, item, 1);
-    /*@=nullstate@*/
+	con->numExecs++;
+    }
 }
-/*@=compmempass@*/
 
-int poptReadConfigFile(poptContext con, const char * fn)
-{
-    const unsigned char * file, * chptr, * end;
-    unsigned char * buf;
-/*@dependent@*/ unsigned char * dst;
+int poptReadConfigFile(poptContext con, const char * fn) {
+    char * file=NULL, * chptr, * end;
+    char * buf=NULL, * dst;
     int fd, rc;
-    off_t fileLength;
+    int fileLength;
 
     fd = open(fn, O_RDONLY);
-    if (fd < 0)
-	return (errno == ENOENT ? 0 : POPT_ERROR_ERRNO);
+    if (fd < 0) {
+	if (errno == ENOENT)
+	    return 0;
+	else 
+	    return POPT_ERROR_ERRNO;
+    }
 
     fileLength = lseek(fd, 0, SEEK_END);
-    if (fileLength == -1 || lseek(fd, 0, 0) == -1) {
+    (void) lseek(fd, 0, 0);
+
+    file = malloc(fileLength + 1);
+    if (read(fd, file, fileLength) != fileLength) {
 	rc = errno;
-	(void) close(fd);
-	/*@-mods@*/
+	close(fd);
 	errno = rc;
-	/*@=mods@*/
+	if (file) free(file);
 	return POPT_ERROR_ERRNO;
     }
+    close(fd);
 
-    file = alloca(fileLength + 1);
-    if (read(fd, (char *)file, fileLength) != fileLength) {
-	rc = errno;
-	(void) close(fd);
-	/*@-mods@*/
-	errno = rc;
-	/*@=mods@*/
-	return POPT_ERROR_ERRNO;
-    }
-    if (close(fd) == -1)
-	return POPT_ERROR_ERRNO;
-
-    dst = buf = alloca(fileLength + 1);
+    dst = buf = malloc(fileLength + 1);
 
     chptr = file;
     end = (file + fileLength);
-    /*@-infloops@*/	/* LCL: can't detect chptr++ */
     while (chptr < end) {
 	switch (*chptr) {
 	  case '\n':
 	    *dst = '\0';
 	    dst = buf;
 	    while (*dst && isspace(*dst)) dst++;
-	    if (*dst && *dst != '#')
+	    if (*dst && *dst != '#') {
 		configLine(con, dst);
+	    }
 	    chptr++;
-	    /*@switchbreak@*/ break;
+	    break;
 	  case '\\':
 	    *dst++ = *chptr++;
 	    if (chptr < end) {
@@ -148,37 +105,38 @@ int poptReadConfigFile(poptContext con, const char * fn)
 		else
 		    *dst++ = *chptr++;
 	    }
-	    /*@switchbreak@*/ break;
+	    break;
 	  default:
 	    *dst++ = *chptr++;
-	    /*@switchbreak@*/ break;
+	    break;
 	}
     }
-    /*@=infloops@*/
+
+    free(file);
+    free(buf);
 
     return 0;
 }
 
-int poptReadDefaultConfig(poptContext con, /*@unused@*/ UNUSED(int useEnv))
-{
+int poptReadDefaultConfig(poptContext con, /*@unused@*/ int useEnv) {
     char * fn, * home;
     int rc;
 
-    /*@-type@*/
     if (!con->appName) return 0;
-    /*@=type@*/
 
     rc = poptReadConfigFile(con, "/etc/popt");
     if (rc) return rc;
     if (getuid() != geteuid()) return 0;
 
     if ((home = getenv("HOME"))) {
-	fn = alloca(strlen(home) + 20);
+	fn = malloc(strlen(home) + 20);
 	strcpy(fn, home);
 	strcat(fn, "/.popt");
 	rc = poptReadConfigFile(con, fn);
+	free(fn);
 	if (rc) return rc;
     }
 
     return 0;
 }
+

popt/popthelp.c

@@ -1,92 +1,48 @@
 /* -*- Mode: C; tab-width: 8; indent-tabs-mode: t; c-basic-offset: 4 -*- */
 
-/*@-type@*/
-/** \ingroup popt
- * \file popt/popthelp.c
- */
-
-/* (C) 1998-2000 Red Hat, Inc. -- Licensing details are in the COPYING
+/* (C) 1998 Red Hat Software, Inc. -- Licensing details are in the COPYING
    file accompanying popt source distributions, available from 
-   ftp://ftp.rpm.org/pub/rpm/dist. */
+   ftp://ftp.redhat.com/pub/code/popt */
 
 #include "system.h"
 #include "poptint.h"
 
-/**
- * @param con		context
- * @param key		option(s)
- */
 static void displayArgs(poptContext con,
-		/*@unused@*/ UNUSED(enum poptCallbackReason foo),
+		/*@unused@*/ enum poptCallbackReason foo,
 		struct poptOption * key, 
-		/*@unused@*/ UNUSED(const char * arg), /*@unused@*/ UNUSED(void * data))
-	/*@globals fileSystem@*/
-	/*@modifies fileSystem@*/
-{
-    if (key->shortName == '?')
+		/*@unused@*/ const char * arg, /*@unused@*/ void * data) {
+    if (key->shortName== '?')
 	poptPrintHelp(con, stdout, 0);
     else
 	poptPrintUsage(con, stdout, 0);
     exit(0);
 }
 
-#ifdef	NOTYET
-/*@unchecked@*/
-static int show_option_defaults = 0;
-#endif
-
-/**
- * Empty table marker to enable displaying popt alias/exec options.
- */
-/*@observer@*/ /*@unchecked@*/
-struct poptOption poptAliasOptions[] = {
-    POPT_TABLEEND
-};
-
-/**
- * Auto help table options.
- */
-/*@-castfcnptr@*/
-/*@observer@*/ /*@unchecked@*/
 struct poptOption poptHelpOptions[] = {
-  { NULL, '\0', POPT_ARG_CALLBACK, (void *)&displayArgs, '\0', NULL, NULL },
-  { "help", '?', 0, NULL, '?', N_("Show this help message"), NULL },
-  { "usage", '\0', 0, NULL, 'u', N_("Display brief usage message"), NULL },
-#ifdef	NOTYET
-  { "defaults", '\0', POPT_ARG_NONE, &show_option_defaults, 0,
-	N_("Display option defaults in message"), NULL },
-#endif
-    POPT_TABLEEND
+    { NULL, '\0', POPT_ARG_CALLBACK, (void *)&displayArgs, '\0', NULL, NULL },
+    { "help", '?', 0, NULL, '?', N_("Show this help message"), NULL },
+    { "usage", '\0', 0, NULL, 'u', N_("Display brief usage message"), NULL },
+    { NULL, '\0', 0, NULL, 0, NULL, NULL }
 } ;
-/*@=castfcnptr@*/
 
-/**
- * @param table		option(s)
- */
-/*@observer@*/ /*@null@*/ static const char *
-getTableTranslationDomain(/*@null@*/ const struct poptOption *table)
-	/*@*/
+
+/*@observer@*/ /*@null@*/ static const char *const
+getTableTranslationDomain(const struct poptOption *table)
 {
-    const struct poptOption *opt;
+  const struct poptOption *opt;
 
-    if (table != NULL)
-    for (opt = table; opt->longName || opt->shortName || opt->arg; opt++) {
-	if (opt->argInfo == POPT_ARG_INTL_DOMAIN)
-	    return opt->arg;
-    }
-    return NULL;
+  for(opt = table;
+      opt->longName || opt->shortName || opt->arg;
+      opt++) {
+    if(opt->argInfo == POPT_ARG_INTL_DOMAIN)
+      return opt->arg;
+  }
+
+  return NULL;
 }
 
-/**
- * @param opt		option(s)
- * @param translation_domain	translation domain
- */
-/*@observer@*/ /*@null@*/ static const char *
-getArgDescrip(const struct poptOption * opt,
-		/*@-paramuse@*/		/* FIX: wazzup? */
-		/*@null@*/ UNUSED(const char * translation_domain))
-		/*@=paramuse@*/
-	/*@*/
+/*@observer@*/ /*@null@*/ static const char *const
+getArgDescrip(const struct poptOption * opt, const char *translation_domain)
 {
     if (!(opt->argInfo & POPT_ARG_MASK)) return NULL;
 
@@ -94,229 +50,45 @@ getArgDescrip(const struct poptOption * opt,
 	if (opt->argDescrip) return POPT_(opt->argDescrip);
 
     if (opt->argDescrip) return D_(translation_domain, opt->argDescrip);
-
-    switch (opt->argInfo & POPT_ARG_MASK) {
-    case POPT_ARG_NONE:		return POPT_("NONE");
-    case POPT_ARG_VAL:		return POPT_("VAL");
-    case POPT_ARG_INT:		return POPT_("INT");
-    case POPT_ARG_LONG:		return POPT_("LONG");
-    case POPT_ARG_STRING:	return POPT_("STRING");
-    case POPT_ARG_FLOAT:	return POPT_("FLOAT");
-    case POPT_ARG_DOUBLE:	return POPT_("DOUBLE");
-    default:			return POPT_("ARG");
-    }
+    return POPT_("ARG");
 }
 
-/**
- * @param opt		option(s)
- * @param translation_domain	translation domain
- */
-static /*@only@*/ /*@null@*/ char *
-singleOptionDefaultValue(int lineLength,
-		const struct poptOption * opt,
-		/*@-paramuse@*/	/* FIX: i18n macros disable with lclint */
-		/*@null@*/ UNUSED(const char * translation_domain))
-		/*@=paramuse@*/
-	/*@*/
-{
-    const char * defstr = D_(translation_domain, "default");
-    char * le = malloc(4*lineLength + 1);
-    char * l = le;
-
-    if (le == NULL) return NULL;	/* XXX can't happen */
-    *le = '\0';
-    *le++ = '(';
-    strcpy(le, defstr);	le += strlen(le);
-    *le++ = ':';
-    *le++ = ' ';
-    if (opt->arg)	/* XXX programmer error */
-    switch (opt->argInfo & POPT_ARG_MASK) {
-    case POPT_ARG_VAL:
-    case POPT_ARG_INT:
-    {	long aLong = *((int *)opt->arg);
-	sprintf(le, "%ld", aLong);
-	le += strlen(le);
-    }	break;
-    case POPT_ARG_LONG:
-    {	long aLong = *((long *)opt->arg);
-	sprintf(le, "%ld", aLong);
-	le += strlen(le);
-    }	break;
-    case POPT_ARG_FLOAT:
-    {	double aDouble = *((float *)opt->arg);
-	sprintf(le, "%g", aDouble);
-	le += strlen(le);
-    }	break;
-    case POPT_ARG_DOUBLE:
-    {	double aDouble = *((double *)opt->arg);
-	sprintf(le, "%g", aDouble);
-	le += strlen(le);
-    }	break;
-    case POPT_ARG_STRING:
-    {	const char * s = *(const char **)opt->arg;
-	if (s == NULL) {
-	    strcpy(le, "null");	le += strlen(le);
-	} else {
-	    size_t slen = 4*lineLength - (le - l) - sizeof("\"...\")");
-	    *le++ = '"';
-	    strncpy(le, s, slen); le[slen] = '\0'; le += strlen(le);	
-	    if (slen < strlen(s)) {
-		strcpy(le, "...");	le += strlen(le);
-	    }
-	    *le++ = '"';
-	}
-    }	break;
-    case POPT_ARG_NONE:
-    default:
-	l = _free(l);
-	return NULL;
-	/*@notreached@*/ break;
-    }
-    *le++ = ')';
-    *le = '\0';
-
-    return l;
-}
-
-/**
- * @param fp		output file handle
- * @param opt		option(s)
- * @param translation_domain	translation domain
- */
-static void singleOptionHelp(FILE * fp, int maxLeftCol, 
-		const struct poptOption * opt,
-		/*@null@*/ const char * translation_domain)
-	/*@globals fileSystem @*/
-	/*@modifies *fp, fileSystem @*/
-{
+static void singleOptionHelp(FILE * f, int maxLeftCol, 
+			     const struct poptOption * opt,
+			     const char *translation_domain) {
     int indentLength = maxLeftCol + 5;
     int lineLength = 79 - indentLength;
-    const unsigned char * help = D_(translation_domain, opt->descrip);
-    const char * argDescrip = getArgDescrip(opt, translation_domain);
+    const char * help = D_(translation_domain, opt->descrip);
     int helpLength;
-    unsigned char * defs = NULL;
-    unsigned char * left;
-    int nb = maxLeftCol + 1;
+    const char * ch;
+    char format[10];
+    char * left;
+    const char * argDescrip = getArgDescrip(opt, translation_domain);
 
-    /* Make sure there's more than enough room in target buffer. */
-    if (opt->longName)	nb += strlen(opt->longName);
-    if (argDescrip)	nb += strlen(argDescrip);
-
-    left = malloc(nb);
-    if (left == NULL) return;	/* XXX can't happen */
-    left[0] = '\0';
-    left[maxLeftCol] = '\0';
+    left = malloc(maxLeftCol + 1);
+    *left = '\0';
 
     if (opt->longName && opt->shortName)
-	sprintf(left, "-%c, %s%s", opt->shortName,
-		((opt->argInfo & POPT_ARGFLAG_ONEDASH) ? "-" : "--"),
-		opt->longName);
-    else if (opt->shortName != '\0') 
+	sprintf(left, "-%c, --%s", opt->shortName, opt->longName);
+    else if (opt->shortName) 
 	sprintf(left, "-%c", opt->shortName);
     else if (opt->longName)
-	sprintf(left, "%s%s",
-		((opt->argInfo & POPT_ARGFLAG_ONEDASH) ? "-" : "--"),
-		opt->longName);
-    if (!*left) goto out;
+	sprintf(left, "--%s", opt->longName);
+    if (!*left) return ;
     if (argDescrip) {
-	char * le = left + strlen(left);
-
-	if (opt->argInfo & POPT_ARGFLAG_OPTIONAL)
-	    *le++ = '[';
-
-	/* Choose type of output */
-	/*@-branchstate@*/
-	if (opt->argInfo & POPT_ARGFLAG_SHOW_DEFAULT) {
-	    defs = singleOptionDefaultValue(lineLength, opt, translation_domain);
-	    if (defs) {
-		char * t = malloc((help ? strlen(help) : 0) +
-				strlen(defs) + sizeof(" "));
-		if (t) {
-		    char * te = t;
-		    *te = '\0';
-		    if (help) {
-			strcpy(te, help);	te += strlen(te);
-		    }
-		    *te++ = ' ';
-		    strcpy(te, defs);
-		    defs = _free(defs);
-		}
-		defs = t;
-	    }
-	}
-	/*@=branchstate@*/
-
-	if (opt->argDescrip == NULL) {
-	    switch (opt->argInfo & POPT_ARG_MASK) {
-	    case POPT_ARG_NONE:
-		break;
-	    case POPT_ARG_VAL:
-	    {	long aLong = opt->val;
-		int ops = (opt->argInfo & POPT_ARGFLAG_LOGICALOPS);
-		int negate = (opt->argInfo & POPT_ARGFLAG_NOT);
-
-		/* Don't bother displaying typical values */
-		if (!ops && (aLong == 0L || aLong == 1L || aLong == -1L))
-		    break;
-		*le++ = '[';
-		switch (ops) {
-		case POPT_ARGFLAG_OR:
-		    *le++ = '|';
-		    /*@innerbreak@*/ break;
-		case POPT_ARGFLAG_AND:
-		    *le++ = '&';
-		    /*@innerbreak@*/ break;
-		case POPT_ARGFLAG_XOR:
-		    *le++ = '^';
-		    /*@innerbreak@*/ break;
-		default:
-		    /*@innerbreak@*/ break;
-		}
-		*le++ = '=';
-		if (negate) *le++ = '~';
-		/*@-formatconst@*/
-		sprintf(le, (ops ? "0x%lx" : "%ld"), aLong);
-		le += strlen(le);
-		/*@=formatconst@*/
-		*le++ = ']';
-	    }	break;
-	    case POPT_ARG_INT:
-	    case POPT_ARG_LONG:
-	    case POPT_ARG_FLOAT:
-	    case POPT_ARG_DOUBLE:
-	    case POPT_ARG_STRING:
-		*le++ = '=';
-		strcpy(le, argDescrip);		le += strlen(le);
-		break;
-	    default:
-		break;
-	    }
-	} else {
-	    *le++ = '=';
-	    strcpy(le, argDescrip);		le += strlen(le);
-	}
-	if (opt->argInfo & POPT_ARGFLAG_OPTIONAL)
-	    *le++ = ']';
-	*le = '\0';
+	strcat(left, "=");
+	strcat(left, argDescrip);
     }
 
     if (help)
-	fprintf(fp,"  %-*s   ", maxLeftCol, left);
+	fprintf(f,"  %-*s   ", maxLeftCol, left);
     else {
-	fprintf(fp,"  %s\n", left); 
+	fprintf(f,"  %s\n", left); 
 	goto out;
     }
 
-    left = _free(left);
-    if (defs) {
-	help = defs; defs = NULL;
-    }
-
     helpLength = strlen(help);
     while (helpLength > lineLength) {
-	const unsigned char * ch;
-	char format[10];
-
 	ch = help + lineLength - 1;
 	while (ch > help && !isspace(*ch)) ch--;
 	if (ch == help) break;		/* give up */
@@ -324,56 +96,39 @@ static void singleOptionHelp(FILE * fp, int maxLeftCol,
 	ch++;
 
 	sprintf(format, "%%.%ds\n%%%ds", (int) (ch - help), indentLength);
-	/*@-formatconst@*/
-	fprintf(fp, format, help, " ");
-	/*@=formatconst@*/
+	fprintf(f, format, help, " ");
 	help = ch;
 	while (isspace(*help) && *help) help++;
 	helpLength = strlen(help);
     }
 
-    if (helpLength) fprintf(fp, "%s\n", help);
+    if (helpLength) fprintf(f, "%s\n", help);
 
 out:
-    /*@-dependenttrans@*/
-    defs = _free(defs);
-    /*@=dependenttrans@*/
-    left = _free(left);
+    free(left);
 }
 
-/**
- * @param opt		option(s)
- * @param translation_domain	translation domain
- */
 static int maxArgWidth(const struct poptOption * opt,
-		       /*@null@*/ const char * translation_domain)
-	/*@*/
-{
+		       const char * translation_domain) {
     int max = 0;
-    int len = 0;
+    int this;
     const char * s;
     
-    if (opt != NULL)
     while (opt->longName || opt->shortName || opt->arg) {
 	if ((opt->argInfo & POPT_ARG_MASK) == POPT_ARG_INCLUDE_TABLE) {
-	    if (opt->arg)	/* XXX program error */
-	    len = maxArgWidth(opt->arg, translation_domain);
-	    if (len > max) max = len;
+	    this = maxArgWidth(opt->arg, translation_domain);
+	    if (this > max) max = this;
 	} else if (!(opt->argInfo & POPT_ARGFLAG_DOC_HIDDEN)) {
-	    len = sizeof("  ")-1;
-	    if (opt->shortName != '\0') len += sizeof("-X")-1;
-	    if (opt->shortName != '\0' && opt->longName) len += sizeof(", ")-1;
+	    this = opt->shortName ? 2 : 0;
 	    if (opt->longName) {
-		len += ((opt->argInfo & POPT_ARGFLAG_ONEDASH)
-			? sizeof("-")-1 : sizeof("--")-1);
-		len += strlen(opt->longName);
+		if (this) this += 2;
+		this += strlen(opt->longName) + 2;
 	    }
 
 	    s = getArgDescrip(opt, translation_domain);
 	    if (s)
-		len += sizeof("=")-1 + strlen(s);
-	    if (opt->argInfo & POPT_ARGFLAG_OPTIONAL) len += sizeof("[]")-1;
-	    if (len > max) max = len;
+		this += strlen(s) + 1;
+	    if (this > max) max = this;
 	}
 
 	opt++;
@@ -382,134 +137,77 @@ static int maxArgWidth(const struct poptOption * opt,
     return max;
 }
 
-/**
- * Display popt alias and exec help.
- * @param fp		output file handle
- * @param items		alias/exec array
- * @param nitems	no. of alias/exec entries
- * @param translation_domain	translation domain
- */
-static void itemHelp(FILE * fp,
-		/*@null@*/ poptItem items, int nitems, int left,
-		/*@null@*/ const char * translation_domain)
-	/*@globals fileSystem @*/
-	/*@modifies *fp, fileSystem @*/
-{
-    poptItem item;
-    int i;
-
-    if (items != NULL)
-    for (i = 0, item = items; i < nitems; i++, item++) {
-	const struct poptOption * opt;
-	opt = &item->option;
-	if ((opt->longName || opt->shortName) && 
-	    !(opt->argInfo & POPT_ARGFLAG_DOC_HIDDEN))
-	    singleOptionHelp(fp, left, opt, translation_domain);
-    }
-}
-
-/**
- * @param fp		output file handle
- * @param table		option(s)
- * @param translation_domain	translation domain
- */
-static void singleTableHelp(poptContext con, FILE * fp,
-		/*@null@*/ const struct poptOption * table, int left,
-		/*@null@*/ const char * translation_domain)
-	/*@globals fileSystem @*/
-	/*@modifies *fp, fileSystem @*/
-{
+static void singleTableHelp(FILE * f, const struct poptOption * table, 
+			    int left,
+			    const char *translation_domain) {
     const struct poptOption * opt;
     const char *sub_transdom;
 
-    if (table == poptAliasOptions) {
-	itemHelp(fp, con->aliases, con->numAliases, left, NULL);
-	itemHelp(fp, con->execs, con->numExecs, left, NULL);
-	return;
-    }
-
-    if (table != NULL)
-    for (opt = table; (opt->longName || opt->shortName || opt->arg); opt++) {
+    opt = table;
+    while (opt->longName || opt->shortName || opt->arg) {
 	if ((opt->longName || opt->shortName) && 
 	    !(opt->argInfo & POPT_ARGFLAG_DOC_HIDDEN))
-	    singleOptionHelp(fp, left, opt, translation_domain);
+	    singleOptionHelp(f, left, opt, translation_domain);
+	opt++;
     }
 
-    if (table != NULL)
-    for (opt = table; (opt->longName || opt->shortName || opt->arg); opt++) {
-	if ((opt->argInfo & POPT_ARG_MASK) != POPT_ARG_INCLUDE_TABLE)
-	    continue;
-	sub_transdom = getTableTranslationDomain(opt->arg);
-	if (sub_transdom == NULL)
-	    sub_transdom = translation_domain;
+    opt = table;
+    while (opt->longName || opt->shortName || opt->arg) {
+	if ((opt->argInfo & POPT_ARG_MASK) == POPT_ARG_INCLUDE_TABLE) {
+	    sub_transdom = getTableTranslationDomain(opt->arg);
+	    if(!sub_transdom)
+		sub_transdom = translation_domain;
 	    
-	if (opt->descrip)
-	    fprintf(fp, "\n%s\n", D_(sub_transdom, opt->descrip));
+	    if (opt->descrip)
+		fprintf(f, "\n%s\n", D_(sub_transdom, opt->descrip));
 
-	singleTableHelp(con, fp, opt->arg, left, sub_transdom);
+	    singleTableHelp(f, opt->arg, left, sub_transdom);
+	}
+	opt++;
     }
 }
 
-/**
- * @param con		context
- * @param fp		output file handle
- */
-static int showHelpIntro(poptContext con, FILE * fp)
-	/*@globals fileSystem @*/
-	/*@modifies *fp, fileSystem @*/
-{
+static int showHelpIntro(poptContext con, FILE * f) {
     int len = 6;
     const char * fn;
 
-    fprintf(fp, POPT_("Usage:"));
+    fprintf(f, POPT_("Usage:"));
     if (!(con->flags & POPT_CONTEXT_KEEP_FIRST)) {
-	/*@-nullderef@*/	/* LCL: wazzup? */
 	fn = con->optionStack->argv[0];
-	/*@=nullderef@*/
-	if (fn == NULL) return len;
-	if (strchr(fn, '/')) fn = strrchr(fn, '/') + 1;
-	fprintf(fp, " %s", fn);
+	if (strchr(fn, '/')) fn = strchr(fn, '/') + 1;
+	fprintf(f, " %s", fn);
 	len += strlen(fn) + 1;
     }
 
     return len;
 }
 
-void poptPrintHelp(poptContext con, FILE * fp, /*@unused@*/ UNUSED(int flags))
-{
+void poptPrintHelp(poptContext con, FILE * f, /*@unused@*/ int flags) {
     int leftColWidth;
 
-    (void) showHelpIntro(con, fp);
+    showHelpIntro(con, f);
     if (con->otherHelp)
-	fprintf(fp, " %s\n", con->otherHelp);
+	fprintf(f, " %s\n", con->otherHelp);
     else
-	fprintf(fp, " %s\n", POPT_("[OPTION...]"));
+	fprintf(f, " %s\n", POPT_("[OPTION...]"));
 
     leftColWidth = maxArgWidth(con->options, NULL);
-    singleTableHelp(con, fp, con->options, leftColWidth, NULL);
+    singleTableHelp(f, con->options, leftColWidth, NULL);
 }
 
-/**
- * @param fp		output file handle
- * @param opt		option(s)
- * @param translation_domain	translation domain
- */
-static int singleOptionUsage(FILE * fp, int cursor, 
-		const struct poptOption * opt,
-		/*@null@*/ const char *translation_domain)
-	/*@globals fileSystem @*/
-	/*@modifies *fp, fileSystem @*/
-{
+static int singleOptionUsage(FILE * f, int cursor, 
+			     const struct poptOption * opt,
+			     const char *translation_domain) {
     int len = 3;
     char shortStr[2] = { '\0', '\0' };
     const char * item = shortStr;
     const char * argDescrip = getArgDescrip(opt, translation_domain);
 
-    if (opt->shortName!= '\0' ) {
+    if (opt->shortName) {
 	if (!(opt->argInfo & POPT_ARG_MASK)) 
 	    return cursor;	/* we did these already */
 	len++;
-	shortStr[0] = opt->shortName;
+	*shortStr = opt->shortName;
 	shortStr[1] = '\0';
     } else if (opt->longName) {
 	len += 1 + strlen(opt->longName);
@@ -522,140 +220,82 @@ static int singleOptionUsage(FILE * fp, int cursor,
 	len += strlen(argDescrip) + 1;
 
     if ((cursor + len) > 79) {
-	fprintf(fp, "\n       ");
+	fprintf(f, "\n       ");
 	cursor = 7;
     } 
 
-    fprintf(fp, " [-%s%s%s%s]",
-	((opt->shortName || (opt->argInfo & POPT_ARGFLAG_ONEDASH)) ? "" : "-"),
-	item,
-	(argDescrip ? (opt->shortName != '\0' ? " " : "=") : ""),
-	(argDescrip ? argDescrip : ""));
+    fprintf(f, " [-%s%s%s%s]", opt->shortName ? "" : "-", item,
+	    argDescrip ? (opt->shortName ? " " : "=") : "",
+	    argDescrip ? argDescrip : "");
 
     return cursor + len + 1;
 }
 
-/**
- * Display popt alias and exec usage.
- * @param fp		output file handle
- * @param item		alias/exec array
- * @param nitems	no. of ara/exec entries
- * @param translation_domain	translation domain
- */
-static int itemUsage(FILE * fp, int cursor, poptItem item, int nitems,
-		/*@null@*/ const char * translation_domain)
-	/*@globals fileSystem @*/
-	/*@modifies *fp, fileSystem @*/
-{
-    int i;
-
-    /*@-branchstate@*/		/* FIX: W2DO? */
-    if (item != NULL)
-    for (i = 0; i < nitems; i++, item++) {
-	const struct poptOption * opt;
-	opt = &item->option;
-        if ((opt->argInfo & POPT_ARG_MASK) == POPT_ARG_INTL_DOMAIN) {
+static int singleTableUsage(FILE * f, int cursor, const struct poptOption * table,
+		     const char *translation_domain) {
+    const struct poptOption * opt;
+    
+    opt = table;
+    while (opt->longName || opt->shortName || opt->arg) {
+        if ((opt->argInfo & POPT_ARG_MASK) == POPT_ARG_INTL_DOMAIN)
 	    translation_domain = (const char *)opt->arg;
-	} else if ((opt->longName || opt->shortName) &&
-		 !(opt->argInfo & POPT_ARGFLAG_DOC_HIDDEN)) {
-	    cursor = singleOptionUsage(fp, cursor, opt, translation_domain);
-	}
+	else if ((opt->argInfo & POPT_ARG_MASK) == POPT_ARG_INCLUDE_TABLE) 
+	    cursor = singleTableUsage(f, cursor, opt->arg,
+				      translation_domain);
+	else if ((opt->longName || opt->shortName) && 
+		 !(opt->argInfo & POPT_ARGFLAG_DOC_HIDDEN))
+	  cursor = singleOptionUsage(f, cursor, opt, translation_domain);
+
+	opt++;
     }
-    /*@=branchstate@*/
 
     return cursor;
 }
 
-/**
- * @param fp		output file handle
- * @param opt		option(s)
- * @param translation_domain	translation domain
- */
-static int singleTableUsage(poptContext con, FILE * fp,
-		int cursor, const struct poptOption * opt,
-		/*@null@*/ const char * translation_domain)
-	/*@globals fileSystem @*/
-	/*@modifies *fp, fileSystem @*/
-{
-    /*@-branchstate@*/		/* FIX: W2DO? */
-    if (opt != NULL)
-    for (; (opt->longName || opt->shortName || opt->arg) ; opt++) {
-        if ((opt->argInfo & POPT_ARG_MASK) == POPT_ARG_INTL_DOMAIN) {
-	    translation_domain = (const char *)opt->arg;
-	} else if ((opt->argInfo & POPT_ARG_MASK) == POPT_ARG_INCLUDE_TABLE) {
-	    if (opt->arg)	/* XXX program error */
-	    cursor = singleTableUsage(con, fp, cursor, opt->arg,
-			translation_domain);
-	} else if ((opt->longName || opt->shortName) &&
-		 !(opt->argInfo & POPT_ARGFLAG_DOC_HIDDEN)) {
-	    cursor = singleOptionUsage(fp, cursor, opt, translation_domain);
-	}
-    }
-    /*@=branchstate@*/
-
-    return cursor;
-}
-
-/**
- * Return concatenated short options for display.
- * @param opt		option(s)
- * @param fp		output file handle
- * @retval str		concatenation of short options
- * @return		length of display string
- */
-static int showShortOptions(const struct poptOption * opt, FILE * fp,
-		/*@null@*/ char * str)
-	/*@globals fileSystem @*/
-	/*@modifies *str, *fp, fileSystem @*/
-{
-    char * s = alloca(300);	/* larger then the ascii set */
+static int showShortOptions(const struct poptOption * opt, FILE * f, 
+			    char * str) {
+    char s[300];		/* this is larger then the ascii set, so
+				   it should do just fine */
 
     s[0] = '\0';
-    /*@-branchstate@*/		/* FIX: W2DO? */
     if (str == NULL) {
 	memset(s, 0, sizeof(s));
 	str = s;
     }
-    /*@=branchstate@*/
 
-    if (opt != NULL)
-    for (; (opt->longName || opt->shortName || opt->arg); opt++) {
+    while (opt->longName || opt->shortName || opt->arg) {
 	if (opt->shortName && !(opt->argInfo & POPT_ARG_MASK))
 	    str[strlen(str)] = opt->shortName;
 	else if ((opt->argInfo & POPT_ARG_MASK) == POPT_ARG_INCLUDE_TABLE)
-	    if (opt->arg)	/* XXX program error */
-		(void) showShortOptions(opt->arg, fp, str);
+	    showShortOptions(opt->arg, f, str);
+
+	opt++;
     } 
 
-    if (s != str || *s != '\0')
+    if (s != str || !*s)
 	return 0;
 
-    fprintf(fp, " [-%s]", s);
+    fprintf(f, " [-%s]", s);
     return strlen(s) + 4;
 }
 
-void poptPrintUsage(poptContext con, FILE * fp, /*@unused@*/ UNUSED(int flags))
-{
+void poptPrintUsage(poptContext con, FILE * f, /*@unused@*/ int flags) {
     int cursor;
 
-    cursor = showHelpIntro(con, fp);
-    cursor += showShortOptions(con->options, fp, NULL);
-    (void) singleTableUsage(con, fp, cursor, con->options, NULL);
-    (void) itemUsage(fp, cursor, con->aliases, con->numAliases, NULL);
-    (void) itemUsage(fp, cursor, con->execs, con->numExecs, NULL);
+    cursor = showHelpIntro(con, f);
+    cursor += showShortOptions(con->options, f, NULL);
+    singleTableUsage(f, cursor, con->options, NULL);
 
     if (con->otherHelp) {
 	cursor += strlen(con->otherHelp) + 1;
-	if (cursor > 79) fprintf(fp, "\n       ");
-	fprintf(fp, " %s", con->otherHelp);
+	if (cursor > 79) fprintf(f, "\n       ");
+	fprintf(f, " %s", con->otherHelp);
     }
 
-    fprintf(fp, "\n");
+    fprintf(f, "\n");
 }
 
-void poptSetOtherOptionHelp(poptContext con, const char * text)
-{
-    con->otherHelp = _free(con->otherHelp);
+void poptSetOtherOptionHelp(poptContext con, const char * text) {
+    if (con->otherHelp) xfree(con->otherHelp);
     con->otherHelp = xstrdup(text);
 }
-/*@=type@*/

popt/poptint.h

@@ -1,78 +1,69 @@
-/** \ingroup popt
- * \file popt/poptint.h
- */
-
-/* (C) 1998-2000 Red Hat, Inc. -- Licensing details are in the COPYING
+/* (C) 1998 Red Hat Software, Inc. -- Licensing details are in the COPYING
    file accompanying popt source distributions, available from 
-   ftp://ftp.rpm.org/pub/rpm/dist. */
+   ftp://ftp.redhat.com/pub/code/popt */
 
 #ifndef H_POPTINT
 #define H_POPTINT
 
-/**
- * Wrapper to free(3), hides const compilation noise, permit NULL, return NULL.
- * @param p		memory to free
- * @retval		NULL always
- */
-/*@unused@*/ static inline /*@null@*/ void *
-_free(/*@only@*/ /*@null@*/ const void * p)
-	/*@modifies p @*/
-{
-    if (p != NULL)	free((void *)p);
-    return NULL;
-}
-
 /* Bit mask macros. */
 typedef	unsigned int __pbm_bits;
 #define	__PBM_NBITS		(8 * sizeof (__pbm_bits))
 #define	__PBM_IX(d)		((d) / __PBM_NBITS)
-#define __PBM_MASK(d)		((__pbm_bits) 1 << (((unsigned)(d)) % __PBM_NBITS))
+#define __PBM_MASK(d)		((__pbm_bits) 1 << ((d) % __PBM_NBITS))
 typedef struct {
     __pbm_bits bits[1];
 } pbm_set;
 #define	__PBM_BITS(set)	((set)->bits)
 
 #define	PBM_ALLOC(d)	calloc(__PBM_IX (d) + 1, sizeof(__pbm_bits))
-#define	PBM_FREE(s)	_free(s);
+#define	PBM_FREE(s)	free(s);
 #define PBM_SET(d, s)   (__PBM_BITS (s)[__PBM_IX (d)] |= __PBM_MASK (d))
 #define PBM_CLR(d, s)   (__PBM_BITS (s)[__PBM_IX (d)] &= ~__PBM_MASK (d))
 #define PBM_ISSET(d, s) ((__PBM_BITS (s)[__PBM_IX (d)] & __PBM_MASK (d)) != 0)
 
 struct optionStackEntry {
     int argc;
-/*@only@*/ /*@null@*/ const char ** argv;
-/*@only@*/ /*@null@*/ pbm_set * argb;
+    /*@only@*/ const char ** argv;
+    /*@only@*/ pbm_set * argb;
     int next;
-/*@only@*/ /*@null@*/ const char * nextArg;
-/*@keep@*/ /*@null@*/ const char * nextCharArg;
-/*@dependent@*/ /*@null@*/ poptItem currAlias;
+    /*@only@*/ const char * nextArg;
+    /*@keep@*/ const char * nextCharArg;
+    /*@dependent@*/ struct poptAlias * currAlias;
     int stuffed;
 };
 
+struct execEntry {
+    const char * longName;
+    char shortName;
+    const char * script;
+};
+
 struct poptContext_s {
     struct optionStackEntry optionStack[POPT_OPTION_DEPTH];
-/*@dependent@*/ struct optionStackEntry * os;
-/*@owned@*/ /*@null@*/ const char ** leftovers;
+    /*@dependent@*/ struct optionStackEntry * os;
+    /*@owned@*/ const char ** leftovers;
     int numLeftovers;
     int nextLeftover;
-/*@keep@*/ const struct poptOption * options;
+    /*@keep@*/ const struct poptOption * options;
     int restLeftover;
-/*@only@*/ /*@null@*/ const char * appName;
-/*@only@*/ /*@null@*/ poptItem aliases;
+    /*@only@*/ const char * appName;
+    /*@only@*/ struct poptAlias * aliases;
     int numAliases;
     int flags;
-/*@owned@*/ /*@null@*/ poptItem execs;
+    struct execEntry * execs;
     int numExecs;
-/*@only@*/ /*@null@*/ const char ** finalArgv;
+    /*@only@*/ const char ** finalArgv;
     int finalArgvCount;
     int finalArgvAlloced;
-/*@dependent@*/ /*@null@*/ poptItem doExec;
-/*@only@*/ const char * execPath;
+    /*@dependent@*/ struct execEntry * doExec;
+    /*@only@*/ const char * execPath;
     int execAbsolute;
-/*@only@*/ const char * otherHelp;
-/*@null@*/ pbm_set * arg_strip;
+    /*@only@*/ const char * otherHelp;
+    pbm_set * arg_strip;
 };
 
+#define	xfree(_a)	free((void *)_a)
+
 #ifdef HAVE_LIBINTL_H
 #include <libintl.h>
 #endif
@@ -80,17 +71,17 @@ struct poptContext_s {
 #if defined(HAVE_GETTEXT) && !defined(__LCLINT__)
 #define _(foo) gettext(foo)
 #else
-#define _(foo) foo
+#define _(foo) (foo)
 #endif
 
 #if defined(HAVE_DGETTEXT) && !defined(__LCLINT__)
 #define D_(dom, str) dgettext(dom, str)
 #define POPT_(foo) D_("popt", foo)
 #else
-#define D_(dom, str) str
-#define POPT_(foo) foo
+#define POPT_(foo) (foo)
+#define D_(dom, str) (str)
 #endif
 
-#define N_(foo) foo
+#define N_(foo) (foo)
 
 #endif

popt/poptparse.c

@@ -1,10 +1,6 @@
-/** \ingroup popt
- * \file popt/poptparse.c
- */
-
-/* (C) 1998-2000 Red Hat, Inc. -- Licensing details are in the COPYING
+/* (C) 1998 Red Hat Software, Inc. -- Licensing details are in the COPYING
    file accompanying popt source distributions, available from 
-   ftp://ftp.rpm.org/pub/rpm/dist. */
+   ftp://ftp.redhat.com/pub/code/popt */
 
 #include "system.h"
 
@@ -18,8 +14,6 @@ int poptDupArgv(int argc, const char **argv,
     char * dst;
     int i;
 
-    if (argc <= 0 || argv == NULL)	/* XXX can't happen */
-	return POPT_ERROR_NOARG;
     for (i = 0; i < argc; i++) {
 	if (argv[i] == NULL)
 	    return POPT_ERROR_NOARG;
@@ -27,64 +21,53 @@ int poptDupArgv(int argc, const char **argv,
     }
 	
     dst = malloc(nb);
-    if (dst == NULL)			/* XXX can't happen */
-	return POPT_ERROR_MALLOC;
     argv2 = (void *) dst;
     dst += (argc + 1) * sizeof(*argv);
 
-    /*@-branchstate@*/
     for (i = 0; i < argc; i++) {
 	argv2[i] = dst;
 	dst += strlen(strcpy(dst, argv[i])) + 1;
     }
-    /*@=branchstate@*/
     argv2[argc] = NULL;
 
-    if (argvPtr) {
-	*argvPtr = argv2;
-    } else {
-	free(argv2);
-	argv2 = NULL;
-    }
-    if (argcPtr)
-	*argcPtr = argc;
+    *argvPtr = argv2;
+    *argcPtr = argc;
     return 0;
 }
 
-int poptParseArgvString(const unsigned char * s, int * argcPtr, const char *** argvPtr)
+int poptParseArgvString(const char * s, int * argcPtr, const char *** argvPtr)
 {
-    const unsigned char * src;
-    unsigned char quote = '\0';
+    const char * src;
+    char quote = '\0';
     int argvAlloced = POPT_ARGV_ARRAY_GROW_DELTA;
     const char ** argv = malloc(sizeof(*argv) * argvAlloced);
     int argc = 0;
     int buflen = strlen(s) + 1;
-    char * buf = memset(alloca(buflen), 0, buflen);
-    int rc = POPT_ERROR_MALLOC;
+    char *buf0 = calloc(buflen, 1);
+    char *buf = buf0;
 
-    if (argv == NULL) return rc;
     argv[argc] = buf;
 
-    for (src = s; *src != '\0'; src++) {
+    for (src = s; *src; src++) {
 	if (quote == *src) {
 	    quote = '\0';
-	} else if (quote != '\0') {
+	} else if (quote) {
 	    if (*src == '\\') {
 		src++;
 		if (!*src) {
-		    rc = POPT_ERROR_BADQUOTE;
-		    goto exit;
+		    free(argv);
+		    free(buf0);
+		    return POPT_ERROR_BADQUOTE;
 		}
 		if (*src != quote) *buf++ = '\\';
 	    }
 	    *buf++ = *src;
 	} else if (isspace(*src)) {
-	    if (*argv[argc] != '\0') {
+	    if (*argv[argc]) {
 		buf++, argc++;
 		if (argc == argvAlloced) {
 		    argvAlloced += POPT_ARGV_ARRAY_GROW_DELTA;
 		    argv = realloc(argv, sizeof(*argv) * argvAlloced);
-		    if (argv == NULL) goto exit;
 		}
 		argv[argc] = buf;
 	    }
@@ -92,17 +75,18 @@ int poptParseArgvString(const unsigned char * s, int * argcPtr, const char *** a
 	  case '"':
 	  case '\'':
 	    quote = *src;
-	    /*@switchbreak@*/ break;
+	    break;
 	  case '\\':
 	    src++;
 	    if (!*src) {
-		rc = POPT_ERROR_BADQUOTE;
-		goto exit;
+		free(argv);
+		free(buf0);
+		return POPT_ERROR_BADQUOTE;
 	    }
 	    /*@fallthrough@*/
 	  default:
 	    *buf++ = *src;
-	    /*@switchbreak@*/ break;
+	    break;
 	}
     }
 
@@ -110,9 +94,9 @@ int poptParseArgvString(const unsigned char * s, int * argcPtr, const char *** a
 	argc++, buf++;
     }
 
-    rc = poptDupArgv(argc, argv, argcPtr, argvPtr);
+    (void) poptDupArgv(argc, argv, argcPtr, argvPtr);
 
-exit:
-    if (argv) free(argv);
-    return rc;
+    free(argv);
+    free(buf0);
+    return 0;
 }

popt/system.h

@@ -19,28 +19,12 @@
 #include <unistd.h>
 #endif
 
-#if !defined(__GNUC__) || defined(APPLE)
-/* Apparently the OS X port of gcc gags on __attribute__.
- *
- * <http://www.opensource.apple.com/bugs/X/gcc/2512150.html> */
-#define __attribute__(x) 
-
-#endif
-
 #ifdef __NeXT
 /* access macros are not declared in non posix mode in unistd.h -
  don't try to use posix on NeXTstep 3.3 ! */
 #include <libc.h>
 #endif
 
-#if defined(__LCLINT__)
-/*@-declundef -incondefs -redecl@*/ /* LCL: missing annotation */
-/*@only@*/ void * alloca (size_t __size)
-	/*@ensures MaxSet(result) == (__size - 1) @*/
-	/*@*/;
-/*@=declundef =incondefs =redecl@*/
-#endif
-
 /* AIX requires this to be the first thing in the file.  */ 
 #ifndef __GNUC__
 # if HAVE_ALLOCA_H
@@ -49,15 +33,8 @@
 #  ifdef _AIX
 #pragma alloca
 #  else
-#   if HAVE_ALLOCA
-#    ifndef alloca /* predefined by HP cc +Olibcalls */
+#   ifndef alloca /* predefined by HP cc +Olibcalls */
 char *alloca ();
-#    endif
-#   else
-#    ifdef alloca
-#     undef alloca
-#    endif
-#    define alloca(sz) malloc(sz) /* Kludge this for now */
 #   endif
 #  endif
 # endif
@@ -65,10 +42,7 @@ char *alloca ();
 #define alloca __builtin_alloca
 #endif
 
-/*@-redecl -redef@*/
-/*@mayexit@*/ /*@only@*/ char * xstrdup (const char *str)
-	/*@*/;
-/*@=redecl =redef@*/
+/*@only@*/ char * xstrdup (const char *str);
 
 #if HAVE_MCHECK_H && defined(__GNUC__)
 #define	vmefail()	(fprintf(stderr, "virtual memory exhausted.\n"), exit(EXIT_FAILURE), NULL)
@@ -77,6 +51,5 @@ char *alloca ();
 #define	xstrdup(_str)	strdup(_str)
 #endif  /* HAVE_MCHECK_H && defined(__GNUC__) */
 
-#define UNUSED(x) x __attribute__((__unused__))
 
 #include "popt.h"

progress.c

@@ -1,176 +0,0 @@
-/*  -*- c-file-style: "linux" -*-
- *
- * Copyright (C) 1996-2000 by Andrew Tridgell
- * Copyright (C) Paul Mackerras 1996
- * Copyright (C) 2001, 2002 by Martin Pool <mbp@samba.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "rsync.h"
-
-extern struct stats stats;
-extern int am_server;
-
-#define PROGRESS_HISTORY_SECS 5
-
-#ifdef GETPGRP_VOID
-#define GETPGRP_ARG
-#else
-#define GETPGRP_ARG 0
-#endif
-
-struct progress_history {
-	struct timeval time;
-	OFF_T ofs;
-};
-
-static struct progress_history ph_start;
-static struct progress_history ph_list[PROGRESS_HISTORY_SECS];
-static int newest_hpos, oldest_hpos;
-
-static unsigned long msdiff(struct timeval *t1, struct timeval *t2)
-{
-	return (t2->tv_sec - t1->tv_sec) * 1000L
-	     + (t2->tv_usec - t1->tv_usec) / 1000;
-}
-
-
-/**
- * @param ofs Current position in file
- * @param size Total size of file
- * @param is_last True if this is the last time progress will be
- * printed for this file, so we should output a newline.  (Not
- * necessarily the same as all bytes being received.)
- **/
-static void rprint_progress(OFF_T ofs, OFF_T size, struct timeval *now,
-			    int is_last)
-{
-	char eol[256];
-	const char *units;
-	int pct = ofs == size ? 100 : (int) (100.0 * ofs / size);
-	unsigned long diff;
-	double rate, remain;
-	int remain_h, remain_m, remain_s;
-
-	if (is_last) {
-		/* Compute stats based on the starting info. */
-		if (!ph_start.time.tv_sec
-		    || !(diff = msdiff(&ph_start.time, now)))
-			diff = 1;
-		rate = (double) (ofs - ph_start.ofs) * 1000.0 / diff / 1024.0;
-		/* Switch to total time taken for our last update. */
-		remain = (double) diff / 1000.0;
-	} else {
-		/* Compute stats based on recent progress. */
-		if (!(diff = msdiff(&ph_list[oldest_hpos].time, now)))
-			diff = 1;
-		rate = (double) (ofs - ph_list[oldest_hpos].ofs) * 1000.0
-		     / diff / 1024.0;
-		remain = rate ? (double) (size - ofs) / rate / 1000.0 : 0.0;
-	}
-
-	if (rate > 1024*1024) {
-		rate /= 1024.0 * 1024.0;
-		units = "GB/s";
-	} else if (rate > 1024) {
-		rate /= 1024.0;
-		units = "MB/s";
-	} else {
-		units = "kB/s";
-	}
-
-	remain_s = (int) remain % 60;
-	remain_m = (int) (remain / 60.0) % 60;
-	remain_h = (int) (remain / 3600.0);
-
-	if (is_last) {
-		snprintf(eol, sizeof eol, "  (%d, %.1f%% of %d)\n",
-			stats.num_transferred_files,
-			(float)((stats.current_file_index+1) * 100)
-				/ stats.num_files,
-			stats.num_files);
-	} else
-		strcpy(eol, "\r");
-	rprintf(FINFO, "%12.0f %3d%% %7.2f%s %4d:%02d:%02d%s",
-		(double) ofs, pct, rate, units,
-		remain_h, remain_m, remain_s, eol);
-}
-
-void end_progress(OFF_T size)
-{
-	if (!am_server) {
-		struct timeval now;
-		gettimeofday(&now, NULL);
-		rprint_progress(size, size, &now, True);
-	}
-	memset(&ph_start, 0, sizeof ph_start);
-}
-
-void show_progress(OFF_T ofs, OFF_T size)
-{
-	struct timeval now;
-#if defined HAVE_GETPGRP && defined HAVE_TCGETPGRP
-	static pid_t pgrp = -1;
-	pid_t tc_pgrp;
-#endif
-
-	if (am_server)
-		return;
-
-#if defined HAVE_GETPGRP && defined HAVE_TCGETPGRP
-	if (pgrp == -1)
-		pgrp = getpgrp(GETPGRP_ARG);
-#endif
-
-	gettimeofday(&now, NULL);
-
-	if (!ph_start.time.tv_sec) {
-		int i;
-
-		/* Try to guess the real starting time when the sender started
-		 * to send us data by using the time we last received some data
-		 * in the last file (if it was recent enough). */
-		if (msdiff(&ph_list[newest_hpos].time, &now) <= 1500) {
-			ph_start.time = ph_list[newest_hpos].time;
-			ph_start.ofs = 0;
-		} else {
-			ph_start.time.tv_sec = now.tv_sec;
-			ph_start.time.tv_usec = now.tv_usec;
-			ph_start.ofs = ofs;
-		}
-
-		for (i = 0; i < PROGRESS_HISTORY_SECS; i++)
-			ph_list[i] = ph_start;
-	}
-	else {
-		if (msdiff(&ph_list[newest_hpos].time, &now) < 1000)
-			return;
-
-		newest_hpos = oldest_hpos;
-		oldest_hpos = (oldest_hpos + 1) % PROGRESS_HISTORY_SECS;
-		ph_list[newest_hpos].time.tv_sec = now.tv_sec;
-		ph_list[newest_hpos].time.tv_usec = now.tv_usec;
-		ph_list[newest_hpos].ofs = ofs;
-	}
-
-#if defined HAVE_GETPGRP && defined HAVE_TCGETPGRP
-	tc_pgrp = tcgetpgrp(STDOUT_FILENO);
-	if (tc_pgrp != pgrp && tc_pgrp != -1)
-		return;
-#endif
-
-	rprint_progress(ofs, size, &now, False);
-}

rsync.c

@@ -1,17 +1,17 @@
-/*
+/* 
    Copyright (C) Andrew Tridgell 1996
    Copyright (C) Paul Mackerras 1996
-
+   
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
-
+   
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
+   
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
@@ -24,20 +24,12 @@
 
 extern int verbose;
 extern int dry_run;
-extern int daemon_log_format_has_i;
 extern int preserve_times;
-extern int omit_dir_times;
 extern int am_root;
-extern int am_server;
-extern int am_sender;
-extern int am_generator;
-extern int am_starting_up;
 extern int preserve_uid;
 extern int preserve_gid;
-extern int inplace;
-extern int keep_dirlinks;
+extern int preserve_perms;
 extern int make_backups;
-extern struct stats stats;
 
 
 /*
@@ -50,100 +42,183 @@ void free_sums(struct sum_struct *s)
 }
 
 
+/*
+ * delete a file or directory. If force_delete is set then delete 
+ * recursively 
+ */
+int delete_file(char *fname)
+{
+	DIR *d;
+	struct dirent *di;
+	char buf[MAXPATHLEN];
+	extern int force_delete;
+	STRUCT_STAT st;
+	int ret;
+	extern int recurse;
+
+#if SUPPORT_LINKS
+	ret = do_lstat(fname, &st);
+#else
+	ret = do_stat(fname, &st);
+#endif
+	if (ret) {
+		return -1;
+	}
+
+	if (!S_ISDIR(st.st_mode)) {
+		if (robust_unlink(fname) == 0 || errno == ENOENT) return 0;
+		rprintf(FERROR,"delete_file: unlink(%s) : %s\n", fname, strerror(errno));
+		return -1;
+	}
+
+	if (do_rmdir(fname) == 0 || errno == ENOENT) return 0;
+	if (!force_delete || !recurse || 
+	    (errno != ENOTEMPTY && errno != EEXIST)) {
+		rprintf(FERROR,"delete_file: rmdir(%s) : %s\n", fname, strerror(errno));
+		return -1;
+	}
+
+	/* now we do a recsursive delete on the directory ... */
+	d = opendir(fname);
+	if (!d) {
+		rprintf(FERROR,"delete_file: opendir(%s): %s\n",
+			fname,strerror(errno));
+		return -1;
+	}
+
+	for (di=readdir(d); di; di=readdir(d)) {
+		char *dname = d_name(di);
+		if (strcmp(dname,".")==0 ||
+		    strcmp(dname,"..")==0)
+			continue;
+		snprintf(buf, sizeof(buf), "%s/%s", fname, dname);
+		if (verbose > 0)
+			rprintf(FINFO,"deleting %s\n", buf);
+		if (delete_file(buf) != 0) {
+			closedir(d);
+			return -1;
+		}
+	}	
+
+	closedir(d);
+	
+	if (do_rmdir(fname) != 0) {
+		rprintf(FERROR,"delete_file: rmdir(%s) : %s\n", fname, strerror(errno));
+		return -1;
+	}
+
+	return 0;
+}
+
+static int is_in_group(gid_t gid)
+{
+#ifdef GETGROUPS_T
+	static gid_t last_in = (gid_t) -2, last_out;
+	static int ngroups = -2;
+	static GETGROUPS_T *gidset;
+	int n;
+
+	if (gid == last_in)
+		return last_out;
+	if (ngroups < -1) {
+		/* treat failure (-1) as if not member of any group */
+		ngroups = getgroups(0, 0);
+		if (ngroups > 0) {
+			gidset = (GETGROUPS_T *) malloc(ngroups * sizeof(GETGROUPS_T));
+			ngroups = getgroups(ngroups, gidset);
+		}
+	}
+
+	last_in = gid;
+	last_out = 0;
+	for (n = 0; n < ngroups; n++) {
+		if (gidset[n] == gid) {
+			last_out = 1;
+			break;
+		}
+	}
+	return last_out;
+
+#else
+	return 0;
+#endif
+}
+
 int set_perms(char *fname,struct file_struct *file,STRUCT_STAT *st,
-	      int flags)
+	      int report)
 {
 	int updated = 0;
 	STRUCT_STAT st2;
 	int change_uid, change_gid;
 
+	if (dry_run) return 0;
+
 	if (!st) {
-		if (dry_run)
-			return 1;
-		if (link_stat(fname, &st2, 0) < 0) {
-			rsyserr(FERROR, errno, "stat %s failed",
-				full_fname(fname));
+		if (link_stat(fname,&st2) != 0) {
+			rprintf(FERROR,"stat %s : %s\n",fname,strerror(errno));
 			return 0;
 		}
 		st = &st2;
 	}
 
-	if (!preserve_times || S_ISLNK(st->st_mode)
-	 || (S_ISDIR(st->st_mode) && omit_dir_times))
-		flags |= PERMS_SKIP_MTIME;
-	if (!(flags & PERMS_SKIP_MTIME)
-	    && cmp_modtime(st->st_mtime, file->modtime) != 0) {
-		if (set_modtime(fname,file->modtime) != 0) {
-			rsyserr(FERROR, errno, "failed to set times on %s",
-				full_fname(fname));
+	if (preserve_times && !S_ISLNK(st->st_mode) &&
+	    cmp_modtime(st->st_mtime, file->modtime) != 0) {
+		/* don't complain about not setting times on directories
+		   because some filesystems can't do it */
+		if (set_modtime(fname,file->modtime) != 0 &&
+		    !S_ISDIR(st->st_mode)) {
+			rprintf(FERROR,"failed to set times on %s : %s\n",
+				fname,strerror(errno));
 			return 0;
+		} else {
+			updated = 1;
 		}
-		updated = 1;
 	}
 
 	change_uid = am_root && preserve_uid && st->st_uid != file->uid;
-	change_gid = preserve_gid && file->gid != GID_NONE
-		&& st->st_gid != file->gid;
-#if !defined HAVE_LCHOWN && !defined CHOWN_MODIFIES_SYMLINK
-	if (S_ISLNK(st->st_mode))
-		;
-	else
-#endif
+	change_gid = preserve_gid && file->gid != (gid_t) -1 && \
+				st->st_gid != file->gid;
+	if (change_gid && !am_root) {
+		/* enforce bsd-style group semantics: non-root can only
+		    change to groups that the user is a member of */
+		change_gid = is_in_group(file->gid);
+	}
 	if (change_uid || change_gid) {
-		if (verbose > 2) {
-			if (change_uid) {
-				rprintf(FINFO,
-					"set uid of %s from %ld to %ld\n",
-					safe_fname(fname),
-					(long)st->st_uid, (long)file->uid);
-			}
-			if (change_gid) {
-				rprintf(FINFO,
-					"set gid of %s from %ld to %ld\n",
-					safe_fname(fname),
-					(long)st->st_gid, (long)file->gid);
-			}
-		}
 		if (do_lchown(fname,
-		    change_uid ? file->uid : st->st_uid,
-		    change_gid ? file->gid : st->st_gid) != 0) {
+			      change_uid?file->uid:st->st_uid,
+			      change_gid?file->gid:st->st_gid) != 0) {
 			/* shouldn't have attempted to change uid or gid
-			 * unless have the privilege */
-			rsyserr(FERROR, errno, "%s %s failed",
-			    change_uid ? "chown" : "chgrp",
-			    full_fname(fname));
+			     unless have the privilege */
+			rprintf(FERROR,"chown %s : %s\n", fname,strerror(errno));
 			return 0;
 		}
 		/* a lchown had been done - we have to re-stat if the
-		 * destination had the setuid or setgid bits set due
-		 * to the side effect of the chown call */
+                   destination had the setuid or setgid bits set due
+                   to the side effect of the chown call */
 		if (st->st_mode & (S_ISUID | S_ISGID)) {
-			link_stat(fname, st,
-				  keep_dirlinks && S_ISDIR(st->st_mode));
+			link_stat(fname, st);
 		}
 		updated = 1;
 	}
 
 #ifdef HAVE_CHMOD
 	if (!S_ISLNK(st->st_mode)) {
-		if ((st->st_mode & CHMOD_BITS) != (file->mode & CHMOD_BITS)) {
+		if (st->st_mode != file->mode) {
 			updated = 1;
-			if (do_chmod(fname,(file->mode & CHMOD_BITS)) != 0) {
-				rsyserr(FERROR, errno, "failed to set permissions on %s",
-					full_fname(fname));
+			if (do_chmod(fname,file->mode) != 0) {
+				rprintf(FERROR,"failed to set permissions on %s : %s\n",
+					fname,strerror(errno));
 				return 0;
 			}
 		}
 	}
 #endif
-
-	if (verbose > 1 && flags & PERMS_REPORT) {
-		enum logcode code = daemon_log_format_has_i || dry_run
-				  ? FCLIENT : FINFO;
+    
+	if (verbose > 1 && report) {
 		if (updated)
-			rprintf(code, "%s\n", safe_fname(fname));
+			rprintf(FINFO,"%s\n",fname);
 		else
-			rprintf(code, "%s is uptodate\n", safe_fname(fname));
+			rprintf(FINFO,"%s is uptodate\n",fname);
 	}
 	return updated;
 }
@@ -151,62 +226,34 @@ int set_perms(char *fname,struct file_struct *file,STRUCT_STAT *st,
 
 void sig_int(void)
 {
-	/* KLUGE: if the user hits Ctrl-C while ssh is prompting
-	 * for a password, then our cleanup's sending of a SIGUSR1
-	 * signal to all our children may kill ssh before it has a
-	 * chance to restore the tty settings (i.e. turn echo back
-	 * on).  By sleeping for a short time, ssh gets a bigger
-	 * chance to do the right thing.  If child processes are
-	 * not ssh waiting for a password, then this tiny delay
-	 * shouldn't hurt anything. */
-	msleep(400);
 	exit_cleanup(RERR_SIGNAL);
 }
 
 
 /* finish off a file transfer, renaming the file and setting the permissions
    and ownership */
-void finish_transfer(char *fname, char *fnametmp, struct file_struct *file,
-		     int ok_to_set_time, int overwriting_basis)
+void finish_transfer(char *fname, char *fnametmp, struct file_struct *file)
 {
-	int ret;
-
-	if (inplace) {
-		if (verbose > 2)
-			rprintf(FINFO, "finishing %s\n", safe_fname(fname));
-		goto do_set_perms;
-	}
-
-	if (make_backups && overwriting_basis && !make_backup(fname))
+	if (make_backups && !make_backup(fname))
 		return;
 
-	/* Change permissions before putting the file into place. */
-	set_perms(fnametmp, file, NULL, ok_to_set_time ? 0 : PERMS_SKIP_MTIME);
-
 	/* move tmp file over real file */
-	if (verbose > 2) {
-		rprintf(FINFO, "renaming %s to %s\n",
-			safe_fname(fnametmp), safe_fname(fname));
-	}
-	ret = robust_rename(fnametmp, fname, file->mode & INITACCESSPERMS);
-	if (ret < 0) {
-		rsyserr(FERROR, errno, "%s %s -> \"%s\"",
-		    ret == -2 ? "copy" : "rename",
-		    full_fname(fnametmp), safe_fname(fname));
+	if (robust_rename(fnametmp,fname) != 0) {
+		if (errno == EXDEV) {
+			/* rename failed on cross-filesystem link.  
+			   Copy the file instead. */
+			if (copy_file(fnametmp,fname, file->mode & INITACCESSPERMS)) {
+				rprintf(FERROR,"copy %s -> %s : %s\n",
+					fnametmp,fname,strerror(errno));
+			} else {
+				set_perms(fname,file,NULL,0);
+			}
+		} else {
+			rprintf(FERROR,"rename %s -> %s : %s\n",
+				fnametmp,fname,strerror(errno));
+		}
 		do_unlink(fnametmp);
-		return;
+	} else {
+		set_perms(fname,file,NULL,0);
 	}
-	if (ret == 0) {
-		/* The file was moved into place (not copied), so it's done. */
-		return;
-	}
-    do_set_perms:
-	set_perms(fname, file, NULL, ok_to_set_time ? 0 : PERMS_SKIP_MTIME);
-}
-
-const char *who_am_i(void)
-{
-	if (am_starting_up)
-		return am_server ? "server" : "client";
-	return am_sender ? "sender" : am_generator ? "generator" : "receiver";
 }

rsync.h

@@ -1,34 +1,30 @@
-/*
-   Copyright (C) by Andrew Tridgell 1996, 2000
+/* 
+   Copyright (C) Andrew Tridgell 1996
    Copyright (C) Paul Mackerras 1996
-   Copyright (C) 2001, 2002 by Martin Pool <mbp@samba.org>
-
+   
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
-
+   
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
+   
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
-
 #define False 0
 #define True 1
 
 #define BLOCK_SIZE 700
 #define RSYNC_RSH_ENV "RSYNC_RSH"
-#define RSYNC_RSH_IO_ENV "RSYNC_RSH_IO"
 
 #define RSYNC_NAME "rsync"
-/* RSYNCD_SYSCONF is now set in config.h */
-#define RSYNCD_USERCONF "rsyncd.conf"
+#define RSYNCD_CONF "/etc/rsyncd.conf"
 
 #define DEFAULT_LOCK_FILE "/var/run/rsyncd.lock"
 #define URL_PREFIX "rsync://"
@@ -39,55 +35,21 @@
    incompatible with older versions :-( */
 #define CHAR_OFFSET 0
 
-/* These flags are only used during the flist transfer. */
 
-#define XMIT_TOP_DIR (1<<0)
-#define XMIT_SAME_MODE (1<<1)
-#define XMIT_EXTENDED_FLAGS (1<<2)
-#define XMIT_SAME_RDEV_pre28 XMIT_EXTENDED_FLAGS /* Only in protocols < 28 */
-#define XMIT_SAME_UID (1<<3)
-#define XMIT_SAME_GID (1<<4)
-#define XMIT_SAME_NAME (1<<5)
-#define XMIT_LONG_NAME (1<<6)
-#define XMIT_SAME_TIME (1<<7)
-#define XMIT_SAME_RDEV_MAJOR (1<<8)
-#define XMIT_HAS_IDEV_DATA (1<<9)
-#define XMIT_SAME_DEV (1<<10)
-#define XMIT_RDEV_MINOR_IS_SMALL (1<<11)
-
-/* These flags are used in the live flist data. */
-
-#define FLAG_TOP_DIR (1<<0)
-#define FLAG_HLINK_EOL (1<<1)	/* receiver/generator */
-#define FLAG_MOUNT_POINT (1<<2)	/* sender */
-#define FLAG_NO_FUZZY (1<<2)	/* generator */
-#define FLAG_DEL_HERE (1<<3)	/* receiver/generator */
-#define FLAG_SENT (1<<3)	/* sender */
-#define FLAG_HLINK_TOL (1<<4)	/* receiver/generator */
+#define FLAG_DELETE (1<<0)
+#define SAME_MODE (1<<1)
+#define SAME_RDEV (1<<2)
+#define SAME_UID (1<<3)
+#define SAME_GID (1<<4)
+#define SAME_DIR (1<<5)
+#define SAME_NAME SAME_DIR
+#define LONG_NAME (1<<6)
+#define SAME_TIME (1<<7)
 
 /* update this if you make incompatible changes */
-#define PROTOCOL_VERSION 29
-
-/* We refuse to interoperate with versions that are not in this range.
- * Note that we assume we'll work with later versions: the onus is on
- * people writing them to make sure that they don't send us anything
- * we won't understand.
- *
- * Interoperation with old but supported protocol versions
- * should cause a warning to be printed.  At a future date
- * the old protocol will become the minimum and
- * compatibility code removed.
- *
- * There are two possible explanations for the limit at
- * MAX_PROTOCOL_VERSION: either to allow new major-rev versions that
- * do not interoperate with us, and (more likely) so that we can
- * detect an attempt to connect rsync to a non-rsync server, which is
- * unlikely to begin by sending a byte between MIN_PROTOCL_VERSION and
- * MAX_PROTOCOL_VERSION. */
-
-#define MIN_PROTOCOL_VERSION 20
-#define OLD_PROTOCOL_VERSION 25
-#define MAX_PROTOCOL_VERSION 40
+#define PROTOCOL_VERSION 24
+#define MIN_PROTOCOL_VERSION 15
+#define MAX_PROTOCOL_VERSION 30
 
 #define RSYNC_PORT 873
 
@@ -96,132 +58,57 @@
 #define CHUNK_SIZE (32*1024)
 #define MAX_MAP_SIZE (256*1024)
 #define IO_BUFFER_SIZE (4092)
-#define MAX_BLOCK_SIZE ((int32)1 << 29)
-
-#define IOERR_GENERAL	(1<<0) /* For backward compatibility, this must == 1 */
-#define IOERR_VANISHED	(1<<1)
-#define IOERR_DEL_LIMIT (1<<2)
 
 #define MAX_ARGS 1000
-#define MAX_BASIS_DIRS 20
-#define MAX_SERVER_ARGS (MAX_BASIS_DIRS*2 + 100)
 
 #define MPLEX_BASE 7
 
-#define NO_FILTERS	0
-#define SERVER_FILTERS	1
-#define ALL_FILTERS	2
-
-#define XFLG_FATAL_ERRORS	(1<<0)
-#define XFLG_OLD_PREFIXES	(1<<1)
-#define XFLG_ANCHORED2ABS	(1<<2)
-
-#define PERMS_REPORT		(1<<0)
-#define PERMS_SKIP_MTIME	(1<<1)
-
-#define FULL_FLUSH	1
-#define NORMAL_FLUSH	0
-
-#define PDIR_CREATE	1
-#define PDIR_DELETE	0
-
-/* Note: 0x00 - 0x7F are used for basis_dir[] indexes! */
-#define FNAMECMP_BASIS_DIR_LOW	0x00 /* Must remain 0! */
-#define FNAMECMP_BASIS_DIR_HIGH 0x7F
-#define FNAMECMP_FNAME		0x80
-#define FNAMECMP_PARTIAL_DIR	0x81
-#define FNAMECMP_BACKUP 	0x82
-#define FNAMECMP_FUZZY		0x83
-
-/* For calling delete_file() */
-#define DEL_NO_RECURSE		(1<<1)
-#define DEL_FORCE_RECURSE	(1<<2) /* recurse even w/o --force */
-#define DEL_TERSE		(1<<3)
-
-/* For use by the itemize_changes code */
-#define ITEM_REPORT_CHECKSUM (1<<1)
-#define ITEM_REPORT_SIZE (1<<2)
-#define ITEM_REPORT_TIME (1<<3)
-#define ITEM_REPORT_PERMS (1<<4)
-#define ITEM_REPORT_OWNER (1<<5)
-#define ITEM_REPORT_GROUP (1<<6)
-#define ITEM_REPORT_XATTRS (1<<7)
-#define ITEM_BASIS_TYPE_FOLLOWS (1<<11)
-#define ITEM_XNAME_FOLLOWS (1<<12)
-#define ITEM_IS_NEW (1<<13)
-#define ITEM_LOCAL_CHANGE (1<<14)
-#define ITEM_TRANSFER (1<<15)
-/* These are outside the range of the transmitted flags. */
-#define ITEM_NO_DEST_AND_NO_UPDATE (1<<16) /* used by itemize() */
-#define ITEM_MISSING_DATA (1<<16)	   /* used by log_formatted() */
-#define ITEM_DELETED (1<<17)		   /* used by log_formatted() */
-
-#define SIGNIFICANT_ITEM_FLAGS (~(\
-	ITEM_BASIS_TYPE_FOLLOWS | ITEM_XNAME_FOLLOWS | ITEM_LOCAL_CHANGE))
-
-
-/* Log-message categories.  FLOG and FCLIENT are only used on the daemon
- * side for custom logging -- they don't get sent over the socket. */
-enum logcode { FERROR=1, FINFO=2, FLOG=3, FCLIENT=4 };
-
-/* Messages types that are sent over the message channel.  The logcode
- * values must all be present here with identical numbers. */
-enum msgcode {
-	MSG_DATA=0,	/* raw data on the multiplexed stream */
-	MSG_ERROR=FERROR, MSG_INFO=FINFO, /* remote logging */
-	MSG_LOG=FLOG, MSG_FCLIENT=FCLIENT, /* sibling logging */
-	MSG_REDO=9,	/* reprocess indicated flist index */
-	MSG_SUCCESS=100,/* successfully updated indicated flist index */
-	MSG_DELETED=101,/* successfully deleted a file on receiving side */
-	MSG_DONE=86	/* current phase is done */
-};
+enum logcode {FNONE=0, FERROR=1, FINFO=2, FLOG=3};
 
 #include "errcode.h"
 
 #include "config.h"
 
-/* The default RSYNC_RSH is always set in config.h. */
-
-#include <stdio.h>
-#ifdef HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
+#if HAVE_REMSH
+#define RSYNC_RSH "remsh"
 #else
-# ifdef HAVE_STDLIB_H
-#  include <stdlib.h>
-# endif
+#define RSYNC_RSH "rsh"
 #endif
-#ifdef HAVE_STRING_H
-# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
-#  include <memory.h>
-# endif
-# include <string.h>
-#endif
-#ifdef HAVE_STRINGS_H
-# include <strings.h>
+
+#include <sys/types.h>
+
+#ifdef HAVE_GETOPT_LONG
+#include <getopt.h>
+#else
+#include "lib/getopt.h"
 #endif
+
 #ifdef HAVE_UNISTD_H
-# include <unistd.h>
+#include <unistd.h>
 #endif
+#include <stdio.h>
+#include <stddef.h>
 
 #ifdef HAVE_SYS_PARAM_H
 #include <sys/param.h>
 #endif
 
-#if defined HAVE_MALLOC_H && (defined HAVE_MALLINFO || !defined HAVE_STDLIB_H)
-#include <malloc.h>
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
 #endif
 
 #ifdef HAVE_SYS_SOCKET_H
 #include <sys/socket.h>
 #endif
 
+#ifdef HAVE_STRING_H
+#include <string.h>
+#endif
+
+#ifdef HAVE_MALLOC_H
+#include <malloc.h>
+#endif
+
 #ifdef TIME_WITH_SYS_TIME
 #include <sys/time.h>
 #include <time.h>
@@ -241,6 +128,8 @@ enum msgcode {
 #endif
 #endif
 
+#include <sys/stat.h>
+
 #ifdef HAVE_SYS_IOCTL_H
 #include <sys/ioctl.h>
 #endif
@@ -276,6 +165,12 @@ enum msgcode {
 #endif
 #endif
 
+#ifdef HAVE_FNMATCH
+#include <fnmatch.h>
+#else
+#include "lib/fnmatch.h"
+#endif
+
 #ifdef HAVE_GLOB_H
 #include <glob.h>
 #endif
@@ -291,37 +186,25 @@ enum msgcode {
 #include <syslog.h>
 #include <sys/file.h>
 
-#ifdef HAVE_DIRENT_H
+#if HAVE_DIRENT_H
 # include <dirent.h>
 #else
 # define dirent direct
-# ifdef HAVE_SYS_NDIR_H
+# if HAVE_SYS_NDIR_H
 #  include <sys/ndir.h>
 # endif
-# ifdef HAVE_SYS_DIR_H
+# if HAVE_SYS_DIR_H
 #  include <sys/dir.h>
 # endif
-# ifdef HAVE_NDIR_H
+# if HAVE_NDIR_H
 #  include <ndir.h>
 # endif
 #endif
 
-#ifdef MAJOR_IN_MKDEV
-#include <sys/mkdev.h>
-# if !defined makedev && (defined mkdev || defined _WIN32 || defined __WIN32__)
-#  define makedev mkdev
-# endif
-#elif defined MAJOR_IN_SYSMACROS
-#include <sys/sysmacros.h>
-#endif
-
 #ifdef HAVE_COMPAT_H
 #include <compat.h>
 #endif
 
-#include <assert.h>
-
-#include "lib/pool_alloc.h"
 
 #define BOOL int
 
@@ -329,117 +212,56 @@ enum msgcode {
 #define uchar unsigned char
 #endif
 
-#ifdef SIGNED_CHAR_OK
+#if HAVE_UNSIGNED_CHAR
 #define schar signed char
 #else
 #define schar char
 #endif
 
-/* Find a variable that is either exactly 32-bits or longer.
- * If some code depends on 32-bit truncation, it will need to
- * take special action in a "#if SIZEOF_INT32 > 4" section. */
 #ifndef int32
-#if SIZEOF_INT == 4
-# define int32 int
-# define SIZEOF_INT32 4
-#elif SIZEOF_LONG == 4
-# define int32 long
-# define SIZEOF_INT32 4
-#elif SIZEOF_SHORT == 4
-# define int32 short
-# define SIZEOF_INT32 4
-#elif SIZEOF_INT > 4
-# define int32 int
-# define SIZEOF_INT32 SIZEOF_INT
-#elif SIZEOF_LONG > 4
-# define int32 long
-# define SIZEOF_INT32 SIZEOF_LONG
+#if (SIZEOF_INT == 4)
+#define int32 int
+#elif (SIZEOF_LONG == 4)
+#define int32 long
+#elif (SIZEOF_SHORT == 4)
+#define int32 short
 #else
-# error Could not find a 32-bit integer variable
+/* I hope this works */
+#define int32 int
+#define LARGE_INT32
 #endif
-#else
-# define SIZEOF_INT32 4
 #endif
 
 #ifndef uint32
 #define uint32 unsigned int32
 #endif
 
-#if SIZEOF_OFF_T == 8 || !SIZEOF_OFF64_T || !defined HAVE_STRUCT_STAT64
-#define OFF_T off_t
-#define STRUCT_STAT struct stat
-#else
+#if HAVE_OFF64_T
 #define OFF_T off64_t
 #define STRUCT_STAT struct stat64
-#define USE_STAT64_FUNCS 1
-#endif
-
-/* CAVEAT: on some systems, int64 will really be a 32-bit integer IFF
- * that's the maximum size the file system can handle and there is no
- * 64-bit type available.  The rsync source must therefore take steps
- * to ensure that any code that really requires a 64-bit integer has
- * it (e.g. the checksum code uses two 32-bit integers for its 64-bit
- * counter). */
-#if SIZEOF_OFF64_T == 8
-# define int64 off64_t
-# define SIZEOF_INT64 8
-#elif SIZEOF_LONG == 8
-# define int64 long
-# define SIZEOF_INT64 8
-#elif SIZEOF_INT == 8
-# define int64 int
-# define SIZEOF_INT64 8
-#elif SIZEOF_LONG_LONG == 8
-# define int64 long long
-# define SIZEOF_INT64 8
-#elif SIZEOF_OFF_T == 8
-# define int64 off_t
-# define SIZEOF_INT64 8
-#elif SIZEOF_INT > 8
-# define int64 int
-# define SIZEOF_INT64 SIZEOF_INT
-#elif SIZEOF_LONG > 8
-# define int64 long
-# define SIZEOF_INT64 SIZEOF_LONG
-#elif SIZEOF_LONG_LONG > 8
-# define int64 long long
-# define SIZEOF_INT64 SIZEOF_LONG_LONG
 #else
-/* As long as it gets... */
-# define int64 off_t
-# define SIZEOF_INT64 SIZEOF_OFF_T
+#define OFF_T off_t
+#define STRUCT_STAT struct stat
 #endif
 
-/* Starting from protocol version 26, we always use 64-bit
- * ino_t and dev_t internally, even if this platform does not
- * allow files to have 64-bit inums.  That's because the
- * receiver needs to find duplicate (dev,ino) tuples to detect
- * hardlinks, and it might have files coming from a platform
- * that has 64-bit inums.
- *
- * The only exception is if we're on a platform with no 64-bit type at
- * all.
- *
- * Because we use read_longint() to get these off the wire, if you
- * transfer devices or hardlinks with dev or inum > 2**32 to a machine
- * with no 64-bit types then you will get an overflow error.  Probably
- * not many people have that combination of machines, and you can
- * avoid it by not preserving hardlinks or not transferring device
- * nodes.  It's not clear that any other behaviour is better.
- *
- * Note that if you transfer devices from a 64-bit-devt machine (say,
- * Solaris) to a 32-bit-devt machine (say, Linux-2.2/x86) then the
- * device numbers will be truncated.  But it's a kind of silly thing
- * to do anyhow.
- *
- * FIXME: I don't think the code in flist.c has ever worked on a system
- * where dev_t is a struct.
- */
+#if HAVE_OFF64_T
+#define int64 off64_t
+#elif (SIZEOF_LONG == 8) 
+#define int64 long
+#elif (SIZEOF_INT == 8) 
+#define int64 int
+#elif HAVE_LONGLONG
+#define int64 long long
+#else
+#define int64 off_t
+#define NO_INT64
+#endif
 
-struct idev {
-	int64 inode;
-	int64 dev;
-};
+#if HAVE_SHORT_INO_T
+#define INO_T uint32
+#else
+#define INO_T ino_t
+#endif
 
 #ifndef MIN
 #define MIN(a,b) ((a)<(b)?(a):(b))
@@ -456,164 +278,79 @@ struct idev {
 /* the length of the md4 checksum */
 #define MD4_SUM_LENGTH 16
 #define SUM_LENGTH 16
-#define SHORT_SUM_LENGTH 2
-#define BLOCKSUM_BIAS 10
 
 #ifndef MAXPATHLEN
 #define MAXPATHLEN 1024
 #endif
 
-#ifndef NAME_MAX
-#define NAME_MAX 255
-#endif
-
 #ifndef INADDR_NONE
 #define INADDR_NONE 0xffffffff
 #endif
 
-#ifndef IN_LOOPBACKNET
-#define IN_LOOPBACKNET 127
-#endif
-
-#define GID_NONE ((gid_t)-1)
-
-#define HL_CHECK_MASTER	0
-#define HL_SKIP		1
-
-struct hlink {
-	int next;
-	int hlindex;
-};
-
-#define F_DEV	link_u.idev->dev
-#define F_INODE	link_u.idev->inode
-
-#define F_HLINDEX link_u.links->hlindex
-#define F_NEXT	link_u.links->next
-
 struct file_struct {
-	union {
-		dev_t rdev;	/* The device number, if this is a device */
-		char *sum;	/* Only a normal file can have a checksum */
-		char *link;	/* Points to symlink string, if a symlink */
-	} u;
-	OFF_T length;
-	char *basename;		/* The current item's name (AKA filename) */
-	char *dirname;		/* The directory info inside the transfer */
-	union {
-		char *root;	/* Sender-side dir info outside transfer */
-		int depth;	/* Receiver-side directory depth info */
-	} dir;
-	union {
-		struct idev *idev;
-		struct hlink *links;
-	} link_u;
+	unsigned flags;
 	time_t modtime;
+	OFF_T length;
+	mode_t mode;
+	INO_T inode;
+	dev_t dev;
+	dev_t rdev;
 	uid_t uid;
 	gid_t gid;
-	mode_t mode;
-	uchar flags;	/* this item MUST remain last */
+	char *basename;
+	char *dirname;
+	char *basedir;
+	char *link;
+	char *sum;
 };
 
-/*
- * Start the flist array at FLIST_START entries and grow it
- * by doubling until FLIST_LINEAR then grow by FLIST_LINEAR
- */
-#define FLIST_START	(32 * 1024)
-#define FLIST_LINEAR	(FLIST_START * 512)
 
-/*
- * Extent size for allocation pools A minimum size of 128KB
- * is needed to mmap them so that freeing will release the
- * space to the OS.
- *
- * Larger sizes reduce leftover fragments and speed free calls
- * (when they happen) Smaller sizes increase the chance of
- * freed allocations freeing whole extents.
- */
-#define FILE_EXTENT	(256 * 1024)
-#define HLINK_EXTENT	(128 * 1024)
+#define ARENA_SIZE	(32 * 1024)
 
-#define WITH_HLINK	1
-#define WITHOUT_HLINK	0
+struct string_area {
+	char *base;
+	char *end;
+	char *current;
+	struct string_area *next;
+};
 
 struct file_list {
-	struct file_struct **files;
-	alloc_pool_t file_pool;
-	alloc_pool_t hlink_pool;
 	int count;
 	int malloced;
-	int low, high;
+	struct file_struct **files;
+	struct string_area *string_area;
 };
 
-#define SUMFLG_SAME_OFFSET	(1<<0)
-
 struct sum_buf {
-	OFF_T offset;		/**< offset in file of this chunk */
-	int32 len;		/**< length of chunk of file */
-	uint32 sum1;	        /**< simple checksum */
-	short flags;		/**< flag bits */
-	char sum2[SUM_LENGTH];	/**< checksum  */
+	OFF_T offset;		/* offset in file of this chunk */
+	int len;		/* length of chunk of file */
+	int i;			/* index of this chunk */
+	uint32 sum1;	        /* simple checksum */
+	char sum2[SUM_LENGTH];	/* checksum  */
 };
 
 struct sum_struct {
-	OFF_T flength;		/**< total file length */
-	struct sum_buf *sums;	/**< points to info for each chunk */
-	int32 count;		/**< how many chunks */
-	int32 blength;		/**< block_length */
-	int32 remainder;	/**< flength % block_length */
-	int s2length;		/**< sum2_length */
+  OFF_T flength;		/* total file length */
+  size_t count;			/* how many chunks */
+  size_t remainder;		/* flength % block_length */
+  size_t n;			/* block_length */
+  struct sum_buf *sums;		/* points to info for each chunk */
 };
 
 struct map_struct {
-	OFF_T file_size;	/* File size (from stat)		*/
-	OFF_T p_offset;		/* Window start				*/
-	OFF_T p_fd_offset;	/* offset of cursor in fd ala lseek	*/
-	char *p;		/* Window pointer			*/
-	int32 p_size;		/* Largest window size we allocated	*/
-	int32 p_len;		/* Latest (rounded) window size		*/
-	int32 def_window_size;	/* Default window size			*/
-	int fd;			/* File Descriptor			*/
-	int status;		/* first errno from read errors		*/
+	char *p;
+	int fd,p_size,p_len;
+	OFF_T file_size, p_offset, p_fd_offset;
 };
 
-#define MATCHFLG_WILD		(1<<0) /* pattern has '*', '[', and/or '?' */
-#define MATCHFLG_WILD2		(1<<1) /* pattern has '**' */
-#define MATCHFLG_WILD2_PREFIX	(1<<2) /* pattern starts with '**' */
-#define MATCHFLG_ABS_PATH	(1<<3) /* path-match on absolute path */
-#define MATCHFLG_INCLUDE	(1<<4) /* this is an include, not an exclude */
-#define MATCHFLG_DIRECTORY	(1<<5) /* this matches only directories */
-#define MATCHFLG_CLEAR_LIST 	(1<<6) /* this item is the "!" token */
-#define MATCHFLG_WORD_SPLIT	(1<<7) /* split rules on whitespace */
-#define MATCHFLG_NO_INHERIT	(1<<8) /* don't inherit these rules */
-#define MATCHFLG_NO_PREFIXES	(1<<9) /* parse no prefixes from patterns */
-#define MATCHFLG_MERGE_FILE	(1<<10)/* specifies a file to merge */
-#define MATCHFLG_PERDIR_MERGE	(1<<11)/* merge-file is searched per-dir */
-#define MATCHFLG_EXCLUDE_SELF	(1<<12)/* merge-file name should be excluded */
-#define MATCHFLG_FINISH_SETUP	(1<<13)/* per-dir merge file needs setup */
-#define MATCHFLG_NEGATE 	(1<<14)/* rule matches when pattern does not */
-#define MATCHFLG_CVS_IGNORE	(1<<15)/* rule was -C or :C */
-#define MATCHFLG_SENDER_SIDE	(1<<16)/* rule applies to the sending side */
-#define MATCHFLG_RECEIVER_SIDE	(1<<17)/* rule applies to the receiving side */
-
-#define MATCHFLGS_FROM_CONTAINER (MATCHFLG_ABS_PATH | MATCHFLG_INCLUDE \
-				| MATCHFLG_DIRECTORY | MATCHFLG_SENDER_SIDE \
-				| MATCHFLG_NEGATE | MATCHFLG_RECEIVER_SIDE)
-
-struct filter_struct {
-	struct filter_struct *next;
+struct exclude_struct {
+	char *orig;
 	char *pattern;
-	uint32 match_flags;
-	union {
-		int slash_cnt;
-		struct filter_list_struct *mergelist;
-	} u;
-};
-
-struct filter_list_struct {
-	struct filter_struct *head;
-	struct filter_struct *tail;
-	char *debug_type;
+	int regular_exp;
+	int fnmatch_flags;
+	int include;
+	int directory;
+	int local;
 };
 
 struct stats {
@@ -623,44 +360,27 @@ struct stats {
 	int64 total_read;
 	int64 literal_data;
 	int64 matched_data;
-	int64 flist_buildtime;
-	int64 flist_xfertime;
 	int flist_size;
 	int num_files;
 	int num_transferred_files;
-	int current_file_index;
 };
 
 
+/* we need this function because of the silly way in which duplicate
+   entries are handled in the file lists - we can't change this
+   without breaking existing versions */
+static inline int flist_up(struct file_list *flist, int i)
+{
+	while (!flist->files[i]->basename) i++;
+	return i;
+}
+
 #include "byteorder.h"
-#include "lib/mdfour.h"
-#include "lib/wildmatch.h"
-#include "lib/permstring.h"
-#include "lib/addrinfo.h"
-
+#include "version.h"
 #include "proto.h"
+#include "lib/mdfour.h"
 
-/* We have replacement versions of these if they're missing. */
-#ifndef HAVE_ASPRINTF
-int asprintf(char **ptr, const char *format, ...);
-#endif
-
-#ifndef HAVE_VASPRINTF
-int vasprintf(char **ptr, const char *format, va_list ap);
-#endif
-
-#if !defined HAVE_VSNPRINTF || !defined HAVE_C99_VSNPRINTF
-#define vsnprintf rsync_vsnprintf
-int vsnprintf(char *str, size_t count, const char *fmt, va_list args);
-#endif
-
-#if !defined HAVE_SNPRINTF || !defined HAVE_C99_VSNPRINTF
-#define snprintf rsync_snprintf
-int snprintf(char *str,size_t count,const char *fmt,...);
-#endif
-
-
-#ifndef HAVE_STRERROR
+#if !HAVE_STRERROR
 extern char *sys_errlist[];
 #define strerror(i) sys_errlist[i]
 #endif
@@ -674,11 +394,11 @@ extern char *sys_errlist[];
 extern int errno;
 #endif
 
-#ifdef HAVE_READLINK
-#define SUPPORT_LINKS 1
-#endif
-#ifdef HAVE_LINK
-#define SUPPORT_HARD_LINKS 1
+#define SUPPORT_LINKS HAVE_READLINK
+#define SUPPORT_HARD_LINKS HAVE_LINK
+
+#ifndef HAVE_LCHOWN
+#define lchown chown
 #endif
 
 #define SIGNAL_CAST (RETSIGTYPE (*)())
@@ -699,24 +419,10 @@ extern int errno;
 #define STDERR_FILENO 2
 #endif
 
-#ifndef S_IRUSR
-#define S_IRUSR 0400
-#endif
-
 #ifndef S_IWUSR
 #define S_IWUSR 0200
 #endif
 
-#ifndef ACCESSPERMS
-#define ACCESSPERMS 0777
-#endif
-
-#ifndef S_ISVTX
-#define S_ISVTX 0
-#endif
-
-#define CHMOD_BITS (S_ISUID | S_ISGID | S_ISVTX | ACCESSPERMS)
-
 #ifndef _S_IFMT
 #define _S_IFMT        0170000
 #endif
@@ -764,62 +470,37 @@ extern int errno;
 /* work out what fcntl flag to use for non-blocking */
 #ifdef O_NONBLOCK
 # define NONBLOCK_FLAG O_NONBLOCK
-#elif defined SYSV
+#elif defined(SYSV)
 # define NONBLOCK_FLAG O_NDELAY
-#else
+#else 
 # define NONBLOCK_FLAG FNDELAY
 #endif
 
-#ifndef INADDR_LOOPBACK
-#define INADDR_LOOPBACK 0x7f000001
-#endif
-
-#ifndef INADDR_NONE
-#define INADDR_NONE 0xffffffff
-#endif
 
 #define IS_DEVICE(mode) (S_ISCHR(mode) || S_ISBLK(mode) || S_ISSOCK(mode) || S_ISFIFO(mode))
 
+#ifndef ACCESSPERMS
+#define ACCESSPERMS 0777
+#endif
 /* Initial mask on permissions given to temporary files.  Mask off setuid
      bits and group access because of potential race-condition security
      holes, and mask other access because mode 707 is bizarre */
 #define INITACCESSPERMS 0700
 
 /* handler for null strings in printf format */
-#define NS(s) ((s)?safe_fname(s):"<NULL>")
-
-#if !defined __GNUC__ || defined __APPLE__
-/* Apparently the OS X port of gcc gags on __attribute__.
- *
- * <http://www.opensource.apple.com/bugs/X/gcc/2512150.html> */
-#define __attribute__(x)
-
-#endif
-
-/* Convenient wrappers for malloc and realloc.  Use them. */
-#define new(type) ((type *)malloc(sizeof(type)))
-#define new_array(type, num) ((type *)_new_array(sizeof(type), (num)))
-#define realloc_array(ptr, type, num) ((type *)_realloc_array((ptr), sizeof(type), (num)))
+#define NS(s) ((s)?(s):"<NULL>")
 
 /* use magic gcc attributes to catch format errors */
  void rprintf(enum logcode , const char *, ...)
-     __attribute__((format (printf, 2, 3)))
+#ifdef __GNUC__
+     __attribute__ ((format (printf, 2, 3)))
+#endif
 ;
 
-/* This is just like rprintf, but it also tries to print some
- * representation of the error code.  Normally errcode = errno. */
-void rsyserr(enum logcode, int, const char *, ...)
-     __attribute__((format (printf, 3, 4)))
-     ;
-
 #ifdef REPLACE_INET_NTOA
 #define inet_ntoa rep_inet_ntoa
 #endif
 
-/* Make sure that the O_BINARY flag is defined. */
-#ifndef O_BINARY
-#define O_BINARY 0
-#endif
 
 #ifndef HAVE_STRLCPY
 size_t strlcpy(char *d, const char *s, size_t bufsize);
@@ -834,33 +515,3 @@ size_t strlcat(char *d, const char *s, size_t bufsize);
 #endif
 
 #define exit_cleanup(code) _exit_cleanup(code, __FILE__, __LINE__)
-
-#ifdef HAVE_GETEUID
-#define MY_UID() geteuid()
-#else
-#define MY_UID() getuid()
-#endif
-
-#ifdef HAVE_GETEGID
-#define MY_GID() getegid()
-#else
-#define MY_GID() getgid()
-#endif
-
-extern int verbose;
-
-#ifndef HAVE_INET_NTOP
-const char *inet_ntop(int af, const void *src, char *dst, size_t size);
-#endif
-
-#ifndef HAVE_INET_PTON
-int inet_pton(int af, const char *src, void *dst);
-#endif
-
-#ifdef MAINTAINER_MODE
-const char *get_panic_action(void);
-#endif
-
-#define UNUSED(x) x __attribute__((__unused__))
-
-extern const char *io_write_phase, *io_read_phase;

rsyncd.conf.yo

@@ -1,6 +1,6 @@
 mailto(rsync-bugs@samba.org)
-manpage(rsyncd.conf)(5)(1 Jun 2005)()()
-manpagename(rsyncd.conf)(configuration file for rsync in daemon mode)
+manpage(rsyncd.conf)(5)(12 Feb 1999)()()
+manpagename(rsyncd.conf)(configuration file for rsync server)
 manpagesynopsis()
 
 rsyncd.conf
@@ -8,7 +8,9 @@ rsyncd.conf
 manpagedescription()
 
 The rsyncd.conf file is the runtime configuration file for rsync when
-run as an rsync daemon. 
+run with the --daemon option. When run in this way rsync becomes a
+rsync server listening on TCP port 873. Connections from rsync clients
+are accepted for either anonymous or authenticated rsync sessions. 
 
 The rsyncd.conf file controls authentication, access, logging and
 available modules.
@@ -19,7 +21,7 @@ The file consists of modules and parameters. A module begins with the
 name of the module in square brackets and continues until the next
 module begins. Modules contain parameters of the form 'name = value'.
 
-The file is line-based -- that is, each newline-terminated line represents
+The file is line-based - that is, each newline-terminated line represents
 either a comment, a module name or a parameter.
 
 Only the first equals sign in a parameter is significant. Whitespace before 
@@ -41,7 +43,7 @@ in string values.
 
 manpagesection(LAUNCHING THE RSYNC DAEMON)
 
-The rsync daemon is launched by specifying the bf(--daemon) option to
+The rsync daemon is launched by specifying the --daemon option to
 rsync. 
 
 The daemon must run with root privileges if you wish to use chroot, to
@@ -49,27 +51,24 @@ bind to a port numbered under 1024 (as is the default 873), or to set
 file ownership.  Otherwise, it must just have permission to read and
 write the appropriate data, log, and lock files.
 
-You can launch it either via inetd, as a stand-alone daemon, or from
-an rsync client via a remote shell.  If run as a stand-alone daemon then
-just run the command "bf(rsync --daemon)" from a suitable startup script.
-If run from an rsync client via a remote shell (by specifying both the
-bf(--rsh) (bf(-e)) option and daemon mode with "::" or "rsync://"), the bf(--daemon)
-option is automatically passed to the remote side.
+You can launch it either via inetd or as a stand-alone daemon. If run
+as a daemon then just run the command "rsync --daemon" from a suitable
+startup script.
 
 When run via inetd you should add a line like this to /etc/services:
 
-verb(  rsync           873/tcp)
+quote(rsync           873/tcp)
 
 and a single line something like this to /etc/inetd.conf:
     
-verb(  rsync   stream  tcp     nowait  root   /usr/bin/rsync rsyncd --daemon)
+quote(rsync   stream  tcp     nowait  root   /usr/bin/rsync rsyncd --daemon)
 
 Replace "/usr/bin/rsync" with the path to where you have rsync installed on
 your system.  You will then need to send inetd a HUP signal to tell it to
 reread its config file.
 
-Note that you should bf(not) send the rsync daemon a HUP signal to force
-it to reread the tt(rsyncd.conf) file. The file is re-read on each client
+Note that you should not send the rsync server a HUP signal to force
+it to reread the tt(/etc/rsyncd.conf). The file is re-read on each client
 connection. 
 
 manpagesection(GLOBAL OPTIONS)
@@ -90,30 +89,19 @@ is no motd file.
 dit(bf(log file)) The "log file" option tells the rsync daemon to log
 messages to that file rather than using syslog. This is particularly
 useful on systems (such as AIX) where syslog() doesn't work for
-chrooted programs.  If the daemon fails to open to specified file, it
-will fall back to using syslog and output an error about the failure.
-(Note that a failure to open the specified log file used to be a fatal
-error.)
+chrooted programs.
 
 dit(bf(pid file)) The "pid file" option tells the rsync daemon to write
-its process ID to that file.
+its process id to that file.
 
 dit(bf(syslog facility)) The "syslog facility" option allows you to
 specify the syslog facility name to use when logging messages from the
-rsync daemon. You may use any standard syslog facility name which is
+rsync server. You may use any standard syslog facility name which is
 defined on your system. Common names are auth, authpriv, cron, daemon,
 ftp, kern, lpr, mail, news, security, syslog, user, uucp, local0,
 local1, local2, local3, local4, local5, local6 and local7. The default
 is daemon. 
 
-dit(bf(port)) You can override the default port the daemon will listen on
-by specifying this value (defaults to 873).  This is ignored if the daemon
-is being run by inetd, and is superseded by the bf(--port) command-line option.
-
-dit(bf(address)) You can override the default IP address the daemon
-will listen on by specifying this value.  This is ignored if the daemon is
-being run by inetd, and is superseded by the bf(--address) command-line option.
-
 dit(bf(socket options)) This option can provide endless fun for people
 who like to tune their systems to the utmost degree. You can set all
 sorts of socket options which may make transfers faster (or
@@ -137,136 +125,91 @@ dit(bf(comment)) The "comment" option specifies a description string
 that is displayed next to the module name when clients obtain a list
 of available modules. The default is no comment.
 
-dit(bf(path)) The "path" option specifies the directory in the daemon's
+dit(bf(path)) The "path" option specifies the directory in the servers
 filesystem to make available in this module.  You must specify this option
-for each module in tt(rsyncd.conf).
+for each module in tt(/etc/rsyncd.conf).
 
-dit(bf(use chroot)) If "use chroot" is true, the rsync daemon will chroot
+dit(bf(use chroot)) If "use chroot" is true, the rsync server will chroot
 to the "path" before starting the file transfer with the client.  This has
 the advantage of extra protection against possible implementation security
-holes, but it has the disadvantages of requiring super-user privileges, 
-of not being able to follow symbolic links that are either absolute or outside
-of the new root path, and of complicating the preservation of usernames and groups
-(see below).  When "use chroot" is false, for security reasons,
-symlinks may only be relative paths pointing to other files within the root
-path, and leading slashes are removed from most absolute paths (options
-such as bf(--backup-dir), bf(--compare-dest), etc. interpret an absolute path as
-rooted in the module's "path" dir, just as if chroot was specified).
-The default for "use chroot" is true.
-
-In order to preserve usernames and groupnames, rsync needs to be able to
-use the standard library functions for looking up names and IDs (i.e.
-getpwuid(), getgrgid(), getpwname(), and getgrnam()).  This means a
-process in the chroot namespace will need to have access to the resources
-used by these library functions (traditionally /etc/passwd and
-/etc/group).  If these resources are not available, rsync will only be
-able to copy the IDs, just as if the bf(--numeric-ids) option had been
-specified.
-
-Note that you are free to setup user/group information in the chroot area
-differently from your normal system.  For example, you could abbreviate
-the list of users and groups.  Also, you can protect this information from
-being downloaded/uploaded by adding an exclude rule to the rsync.conf file
-(e.g. "exclude = /etc/**").  Note that having the exclusion affect uploads
-is a relatively new feature in rsync, so make sure your daemon is
-at least 2.6.3 to effect this.  Also note that it is safest to exclude a
-directory and all its contents combining the rule "/some/dir/" with the
-rule "/some/dir/**" just to be sure that rsync will not allow deeper
-access to some of the excluded files inside the directory (rsync tries to
-do this automatically, but you might as well specify both to be extra
-sure).
+holes, but it has the disadvantages of requiring super-user privileges and
+of not being able to follow symbolic links outside of the new root path
+when reading.  When "use chroot" is false, for security reasons
+symlinks may only be relative paths pointing to other files within the
+root path, and leading slashes are removed from absolute paths.  The
+default for "use chroot" is true.
 
 dit(bf(max connections)) The "max connections" option allows you to
-specify the maximum number of simultaneous connections you will allow.
-Any clients connecting when the maximum has been reached will receive a
-message telling them to try later.  The default is 0 which means no limit.
-See also the "lock file" option.
-
-dit(bf(max verbosity)) The "max verbosity" option allows you to control
-the maximum amount of verbose information that you'll allow the daemon to
-generate (since the information goes into the log file). The default is 1,
-which allows the client to request one level of verbosity.
+specify the maximum number of simultaneous connections you will allow
+to this module of your rsync server. Any clients connecting when the
+maximum has been reached will receive a message telling them to try
+later.  The default is 0 which means no limit.
 
 dit(bf(lock file)) The "lock file" option specifies the file to use to
-support the "max connections" option. The rsync daemon uses record
+support the "max connections" option. The rsync server uses record
 locking on this file to ensure that the max connections limit is not
-exceeded for the modules sharing the lock file. 
-The default is tt(/var/run/rsyncd.lock).
+exceeded. The default is tt(/var/run/rsyncd.lock).
 
 dit(bf(read only)) The "read only" option determines whether clients
 will be able to upload files or not. If "read only" is true then any
 attempted uploads will fail. If "read only" is false then uploads will
-be possible if file permissions on the daemon side allow them. The default
+be possible if file permissions on the server allow them. The default
 is for all modules to be read only.
 
-dit(bf(write only)) The "write only" option determines whether clients
-will be able to download files or not. If "write only" is true then any
-attempted downloads will fail. If "write only" is false then downloads
-will be possible if file permissions on the daemon side allow them.  The
-default is for this option to be disabled.
-
 dit(bf(list)) The "list" option determines if this module should be
 listed when the client asks for a listing of available modules. By
 setting this to false you can create hidden modules. The default is
 for modules to be listable.
 
-dit(bf(uid)) The "uid" option specifies the user name or user ID that
+dit(bf(uid)) The "uid" option specifies the user name or user id that
 file transfers to and from that module should take place as when the daemon
 was run as root. In combination with the "gid" option this determines what
 file permissions are available. The default is uid -2, which is normally
 the user "nobody".
 
-dit(bf(gid)) The "gid" option specifies the group name or group ID that
+dit(bf(gid)) The "gid" option specifies the group name or group id that
 file transfers to and from that module should take place as when the daemon
 was run as root. This complements the "uid" option. The default is gid -2,
 which is normally the group "nobody".
 
-dit(bf(filter)) The "filter" option allows you to specify a space-separated
-list of filter rules that the daemon will not allow to be read or written.
-This is only superficially equivalent to the client specifying these
-patterns with the bf(--filter) option.  Only one "filter" option may be
-specified, but it may contain as many rules as you like, including
-merge-file rules.  Note that per-directory merge-file rules do not provide
-as much protection as global rules, but they can be used to make bf(--delete)
-work better when a client downloads the daemon's files (if the per-dir
-merge files are included in the transfer).
+dit(bf(exclude)) The "exclude" option allows you to specify a space
+separated list of patterns to add to the exclude list. This is
+equivalent to the client specifying these patterns with the --exclude
+option except that the exclude list is not passed to the client and
+thus only apply on the server.  Only one "exclude" option may be
+specified, but you can use "-" and "+" before patterns to specify
+exclude/include.
 
-dit(bf(exclude)) The "exclude" option allows you to specify a
-space-separated list of patterns that the daemon will not allow to be read
-or written.  This is only superficially equivalent to the client
-specifying these patterns with the bf(--exclude) option.  Only one "exclude"
-option may be specified, but you can use "-" and "+" before patterns to
-specify exclude/include.
-
-Because this exclude list is not passed to the client it only applies on
-the daemon: that is, it excludes files received by a client when receiving
-from a daemon and files deleted on a daemon when sending to a daemon, but
-it doesn't exclude files from being deleted on a client when receiving
-from a daemon.  
+Note that this option is not designed with strong security in
+mind, it is quite possible that a client may find a way to bypass this
+exclude list. If you want to absolutely ensure that certain files
+cannot be accessed then use the uid/gid options in combination with
+file permissions.
 
 dit(bf(exclude from)) The "exclude from" option specifies a filename
-on the daemon that contains exclude patterns, one per line.
-This is only superficially equivalent
-to the client specifying the bf(--exclude-from) option with an equivalent file.
-See the "exclude" option above.
+on the server that contains exclude patterns, one per line. This is
+equivalent to the client specifying the --exclude-from option with a
+equivalent file except that the resulting exclude patterns are not
+passed to the client and thus only apply on the server. See also the
+note about security for the exclude option above.
 
-dit(bf(include)) The "include" option allows you to specify a
-space-separated list of patterns which rsync should not exclude. This is
-only superficially equivalent to the client specifying these patterns with
-the bf(--include) option because it applies only on the daemon.  This is
-useful as it allows you to build up quite complex exclude/include rules.
-Only one "include" option may be specified, but you can use "+" and "-"
-before patterns to switch include/exclude.  See the "exclude" option
-above.
+dit(bf(include)) The "include" option allows you to specify a space
+separated list of patterns which rsync should not exclude. This is
+equivalent to the client specifying these patterns with the --include
+option.  This is useful as it allows you to build up quite complex
+exclude/include rules.  Only one "include" option may be specified, but you
+can use "+" and "-" before patterns to switch include/exclude.
+
+See the section of exclude patterns in the rsync man page for information
+on the syntax of this option.
 
 dit(bf(include from)) The "include from" option specifies a filename
-on the daemon that contains include patterns, one per line. This is
-only superficially equivalent to the client specifying the
-bf(--include-from) option with a equivalent file.
-See the "exclude" option above.
+on the server that contains include patterns, one per line. This is
+equivalent to the client specifying the --include-from option with a
+equivalent file.
 
 dit(bf(auth users)) The "auth users" option specifies a comma and
-space-separated list of usernames that will be allowed to connect to
+space separated list of usernames that will be allowed to connect to
 this module. The usernames do not need to exist on the local
 system. The usernames may also contain shell wildcard characters. If
 "auth users" is set then the client will be challenged to supply a
@@ -276,11 +219,6 @@ usernames are passwords are stored in the file specified by the
 "secrets file" option. The default is for all users to be able to
 connect without a password (this is called "anonymous rsync").
 
-See also the "CONNECTING TO AN RSYNC DAEMON OVER A REMOTE SHELL
-PROGRAM" section in rsync(1) for information on how handle an
-rsyncd.conf-level username that differs from the remote-shell-level
-username when using a remote shell to connect to an rsync daemon.
-
 dit(bf(secrets file)) The "secrets file" option specifies the name of
 a file that contains the username:password pairs used for
 authenticating this module. This file is only consulted if the "auth
@@ -297,7 +235,7 @@ by "other"; see "strict modes".
 
 dit(bf(strict modes)) The "strict modes" option determines whether or not 
 the permissions on the secrets file will be checked.  If "strict modes" is
-true, then the secrets file must not be readable by any user ID other
+true, then the secrets file must not be readable by any user id other
 than the one that the rsync daemon is running under.  If "strict modes" is
 false, the check is not performed.  The default is true.  This option
 was added to accommodate rsync running on the Windows operating system.
@@ -309,31 +247,25 @@ connection is rejected.
 
 Each pattern can be in one of five forms:
 
-quote(itemize(
-  it() a dotted decimal IPv4 address of the form a.b.c.d, or an IPv6 address
-  of the form a:b:c::d:e:f. In this case the incoming machine's IP address
-  must match exactly.
-  it() an address/mask in the form ipaddr/n where ipaddr is the IP address
-  and n is the number of one bits in the netmask.  All IP addresses which
-  match the masked IP address will be allowed in.
-  it() an address/mask in the form ipaddr/maskaddr where ipaddr is the
-  IP address and maskaddr is the netmask in dotted decimal notation for IPv4,
-  or similar for IPv6, e.g. ffff:ffff:ffff:ffff:: instead of /64. All IP
-  addresses which match the masked IP address will be allowed in.
+itemize(
+  it() a dotted decimal IP address. In this case the incoming machines
+  IP address must match exactly.
+
+  it() a address/mask in the form a.b.c.d/n were n is the number of
+  one bits in in the netmask. All IP addresses which match the masked
+  IP address will be allowed in.
+
+  it() a address/mask in the form a.b.c.d/e.f.g.h where e.f.g.h is a
+  netmask in dotted decimal notation. All IP addresses which match the masked
+  IP address will be allowed in.
+
   it() a hostname. The hostname as determined by a reverse lookup will
   be matched (case insensitive) against the pattern. Only an exact
   match is allowed in.
+
   it() a hostname pattern using wildcards. These are matched using the
   same rules as normal unix filename matching. If the pattern matches
   then the client is allowed in.
-))
-
-Note IPv6 link-local addresses can have a scope in the address specification:
-
-quote(
-tt(    fe80::1%link1)nl()
-tt(    fe80::%link1/64)nl()
-tt(    fe80::%link1/ffff:ffff:ffff:ffff::)nl()
 )
 
 You can also combine "hosts allow" with a separate "hosts deny"
@@ -354,51 +286,37 @@ rejected. See the "hosts allow" option for more information.
 The default is no "hosts deny" option, which means all hosts can connect.
 
 dit(bf(ignore errors)) The "ignore errors" option tells rsyncd to
-ignore I/O errors on the daemon when deciding whether to run the delete
-phase of the transfer. Normally rsync skips the bf(--delete) step if any
-I/O errors have occurred in order to prevent disastrous deletion due
-to a temporary resource shortage or other I/O error. In some cases this
+ignore IO errors on the server when deciding whether to run the delete
+phase of the transfer. Normally rsync skips the --delete step if any
+IO errors have occurred in order to prevent disasterous deletion due
+to a temporary resource shortage or other IO error. In some cases this
 test is counter productive so you can use this option to turn off this
-behavior. 
+behaviour. 
 
-dit(bf(ignore nonreadable)) This tells the rsync daemon to completely
+dit(bf(ignore nonreadable)) This tells the rsync server to completely
 ignore files that are not readable by the user. This is useful for
 public archives that may have some non-readable files among the
 directories, and the sysadmin doesn't want those files to be seen at all.
 
 dit(bf(transfer logging)) The "transfer logging" option enables per-file 
 logging of downloads and uploads in a format somewhat similar to that
-used by ftp daemons.  The daemon always logs the transfer at the end, so
-if a transfer is aborted, no mention will be made in the log file.
-
-If you want to customize the log lines, see the "log format" option.
+used by ftp daemons. If you want to customize the log formats look at
+the log format option.
 
 dit(bf(log format)) The "log format" option allows you to specify the
-format used for logging file transfers when transfer logging is enabled.
-The format is a text string containing embedded single-character escape
-sequences prefixed with a percent (%) character.  An optional numeric
-field width may also be specified between the percent and the escape
-letter (e.g. "%-50n %8l %07p").
+format used for logging file transfers when transfer logging is
+enabled. The format is a text string containing embedded single
+character escape sequences prefixed with a percent (%) character.
 
-The default log format is "%o %h [%a] %m (%u) %f %l", and a "%t [%p] "
-is always prefixed when using the "log file" option.
-(A perl script that will summarize this default log format is included
-in the rsync source code distribution in the "support" subdirectory:
-rsyncstats.)
+The prefixes that are understood are:
 
-The single-character escapes that are understood are as follows:
-
-quote(itemize(
+itemize(
   it() %h for the remote host name
   it() %a for the remote IP address
   it() %l for the length of the file in bytes
-  it() %p for the process ID of this rsync session
-  it() %o for the operation, which is "send", "recv", or "del."
-  (the latter includes the trailing period)
-  it() %f for the filename (long form on sender; no trailing "/")
-  it() %n for the filename (short form; trailing "/" on dir)
-  it() %L either the string " -> SYMLINK", or " => HARDLINK" or an
-  empty string (where bf(SYMLINK) or bf(HARDLINK) is a filename)
+  it() %p for the process id of this rsync session
+  it() %o for the operation, which is either "send" or "recv"
+  it() %f for the filename
   it() %P for the module path
   it() %m for the module name
   it() %t for the current date time
@@ -406,41 +324,26 @@ quote(itemize(
   it() %b for the number of bytes actually transferred 
   it() %c when sending files this gives the number of checksum bytes
     received for this file
-  it() %i an itemized list of what is being updated
-))
+)
 
-For a list of what the characters mean that are output by "%i", see the
-bf(--itemize-changes) option in the rsync manpage.
+The default log format is "%o %h [%a] %m (%u) %f %l", and a "%t [%p] "
+is always added to the beginning when using the "log file" option.
 
-Note that some of the logged output changes when talking with older
-rsync versions.  For instance, deleted files were only output as verbose
-messages prior to rsync 2.6.4.
+A perl script called rsyncstats to summarize this format is included
+in the rsync source code distribution.
 
 dit(bf(timeout)) The "timeout" option allows you to override the
-clients choice for I/O timeout for this module. Using this option you
+clients choice for IO timeout for this module. Using this option you
 can ensure that rsync won't wait on a dead client forever. The timeout
 is specified in seconds. A value of zero means no timeout and is the
-default. A good choice for anonymous rsync daemons may be 600 (giving
+default. A good choice for anonymous rsync servers may be 600 (giving
 a 10 minute timeout).
 
 dit(bf(refuse options)) The "refuse options" option allows you to
-specify a space-separated list of rsync command line options that will
-be refused by your rsync daemon.
-You may specify the full option name, its one-letter abbreviation, or a
-wild-card string that matches multiple options.
-For example, this would refuse bf(--checksum) (bf(-c)) and all the various
-delete options:
-
-quote(tt(    refuse options = c delete))
-
-The reason the above refuses all delete options is that the options imply
-bf(--delete), and implied options are refused just like explicit options.
-As an additional safety feature, the refusal of "delete" also refuses
-bf(remove-sent-files) when the daemon is the sender; if you want the latter
-without the former, instead refuse "delete-*" -- that refuses all the
-delete modes without affecting bf(--remove-sent-files).
-
-When an option is refused, the daemon prints an error message and exits.
+specify a space separated list of rsync command line options that will
+be refused by your rsync server.  The full names of the options must be
+used (i.e., you must use "checksum" not "c" to disable checksumming).  
+When an option is refused, the server prints an error message and exits.
 To prevent all compression, you can use "dont compress = *" (see below)
 instead of "refuse options = compress" to avoid returning an error to a
 client that requests compression.
@@ -451,11 +354,11 @@ during transfer. Compression is expensive in terms of CPU usage so it
 is usually good to not try to compress files that won't compress well,
 such as already compressed files. 
 
-The "dont compress" option takes a space-separated list of
+The "dont compress" option takes a space separated list of
 case-insensitive wildcard patterns. Any source filename matching one
 of the patterns will not be compressed during transfer.
 
-The default setting is tt(*.gz *.tgz *.zip *.z *.rpm *.deb *.iso *.bz2 *.tbz)
+The default setting is verb(*.gz *.tgz *.zip *.z *.rpm *.deb *.iso *.bz2 *.tbz)
 
 enddit()
 
@@ -468,40 +371,14 @@ realize that this is not a "military strength" authentication system.
 It should be good enough for most purposes but if you want really top
 quality security then I recommend that you run rsync over ssh.
 
-Also note that the rsync daemon protocol does not currently provide any
-encryption of the data that is transferred over the connection. Only
+Also note that the rsync server protocol does not currently provide any
+encryption of the data that is transferred over the link. Only
 authentication is provided. Use ssh as the transport if you want
 encryption.
 
 Future versions of rsync may support SSL for better authentication and
 encryption, but that is still being investigated.
 
-manpagesection(RUNNING AN RSYNC DAEMON OVER A REMOTE SHELL PROGRAM)
-
-If rsync is run with both the bf(--daemon) and bf(--rsh) (bf(-e)) options, it will
-spawn an rsync daemon using a remote shell connection.  Several
-configuration options will not be available unless the remote user is
-root (e.g. chroot, setuid/setgid, etc.).  There is no need to configure
-inetd or the services map to include the rsync daemon port if you run an
-rsync daemon only via a remote shell program.
-
-ADVANCED: To run an rsync daemon out of a single-use ssh key, use the
-"command=em(COMMAND)" syntax in the remote user's authorized_keys entry,
-where command would be
-
-quote(tt(rsync --server --daemon .))
-
-NOTE: rsync's argument parsing expects the trailing ".", so make sure
-that it's there.  If you want to use an rsyncd.conf(5)-style
-configuration file other than the default, you can added a
-bf(--config) option to the em(command):
-
-quote(tt(rsync --server --daemon --config=em(file) .))
-
-Note that the "--server" here is the internal option that rsync uses to
-run the remote version of rsync that it communicates with, and thus you
-should not be using the bf(--server) option under normal circumstances.
-
 manpagesection(EXAMPLES)
 
 A simple rsyncd.conf file that allow anonymous rsync to a ftp area at
@@ -513,17 +390,17 @@ verb(
         comment = ftp export area
 )
 
+
 A more sophisticated example would be:
 
-verb(
-uid = nobody
-gid = nobody
-use chroot = no
-max connections = 4
-syslog facility = local5
+uid = nobody nl()
+gid = nobody nl()
+use chroot = no nl()
+max connections = 4 nl()
+syslog facility = local5 nl()
 pid file = /var/run/rsyncd.pid
 
-[ftp]
+verb([ftp]
         path = /var/ftp/pub
         comment = whole ftp area (approx 6.1 GB)
 
@@ -548,14 +425,12 @@ pid file = /var/run/rsyncd.pid
 
 The /etc/rsyncd.secrets file would look something like this:
 
-quote(
-tt(tridge:mypass)nl()
-tt(susan:herpass)nl()
-)
+tridge:mypass nl()
+susan:herpass
 
 manpagefiles()
 
-/etc/rsyncd.conf or rsyncd.conf
+/etc/rsyncd.conf
 
 manpageseealso()
 
@@ -565,12 +440,15 @@ manpagediagnostics()
 
 manpagebugs()
 
+The rsync server does not send all types of error messages to the
+client. this means a client may be mystified as to why a transfer
+failed. The error will have been logged by syslog on the server.
+
 Please report bugs! The rsync bug tracking system is online at
 url(http://rsync.samba.org/)(http://rsync.samba.org/)
 
 manpagesection(VERSION)
-
-This man page is current for version 2.6.5 of rsync.
+This man page is current for version 2.0 of rsync
 
 manpagesection(CREDITS)
 
@@ -591,13 +469,12 @@ Gailly and Mark Adler.
 manpagesection(THANKS)
 
 Thanks to Warren Stanley for his original idea and patch for the rsync
-daemon. Thanks to Karsten Thygesen for his many suggestions and
+server. Thanks to Karsten Thygesen for his many suggestions and
 documentation! 
 
 manpageauthor()
 
-rsync was written by Andrew Tridgell and Paul Mackerras.
-Many people have later contributed to it.
+rsync was written by Andrew Tridgell and Paul Mackerras.  They may be
+contacted via email at tridge@samba.org and
+Paul.Mackerras@cs.anu.edu.au
 
-Mailing lists for support and development are available at
-url(http://lists.samba.org)(lists.samba.org) 

runtests.sh

@@ -125,11 +125,10 @@ set -e
 
 RUNSHFLAGS='-e'
 
-# for Solaris
-[ -d /usr/xpg4/bin ] && PATH="/usr/xpg4/bin/:$PATH"
-
-if [ "x$loglevel" != x ] && [ "$loglevel" -gt 8 ]; then
-    if set -x; then
+if [ -n "$loglevel" ] && [ "$loglevel" -gt 8 ]
+then
+    if set -x
+    then
 	# If it doesn't work the first time, don't keep trying.
 	RUNSHFLAGS="$RUNSHFLAGS -x"
     fi
@@ -140,39 +139,19 @@ echo "$0 running in `pwd`"
 echo "    rsync_bin=$rsync_bin"
 echo "    srcdir=$srcdir"
 
-if [ -f /usr/bin/whoami ]; then
-    testuser=`/usr/bin/whoami`
-elif [ -f /usr/ucb/whoami ]; then
-    testuser=`/usr/ucb/whoami`
-elif [ -f /bin/whoami ]; then
-    testuser=`/bin/whoami`
-else
-    testuser=`id -un 2>/dev/null || echo ${LOGNAME:-${USERNAME:-${USER:-'UNKNOWN'}}}`
-fi
-
-echo "    testuser=$testuser"
-echo "    os=`uname -a`"
-
-# It must be "yes", not just nonnull
-if [ "x$preserve_scratch" = xyes ]; then
-    echo "    preserve_scratch=yes"
-else
-    echo "    preserve_scratch=no"
-fi    
-
-
-if [ ! -f "$rsync_bin" ]; then
+if test ! -f $rsync_bin
+then
     echo "rsync_bin $rsync_bin is not a file" >&2
     exit 2
 fi
 
-if [ ! -d "$srcdir" ]; then
+if test ! -d $srcdir
+then
     echo "srcdir $srcdir is not a directory" >&2
     exit 2
 fi
 
 RSYNC="$rsync_bin"
-#RSYNC="valgrind --tool=addrcheck $rsync_bin"
 
 export rsync_bin RSYNC
 
@@ -197,18 +176,19 @@ prep_scratch() {
     return 0
 }
 
-maybe_discard_scratch() {
-    [ x"$preserve_scratch" != xyes ] && [ -d "$scratchdir" ] && rm -rf "$scratchdir"
+discard_scratch() {
+    [ -d "$scratchdir" ] && rm -rf "$scratchdir"
     return 0
 }
 
-if [ "x$whichtests" = x ]; then
+if [ "x$whichtests" = x ]
+then
     whichtests="*.test"
 fi
 
 for testscript in $suitedir/$whichtests
 do
-    testbase=`echo $testscript | sed -e 's!.*/!!' -e 's/.test\$//'`
+    testbase=`echo $testscript | sed 's!.*/!!' | sed -e 's/.test\$//'`
     scratchdir="$scratchbase.$testbase"
 
     prep_scratch
@@ -218,30 +198,16 @@ do
     result=$?
     set -e
 
-    if [ "x$always_log" = xyes -o \( $result != 0 -a $result != 77 -a $result != 78 \) ]
-    then
-	echo "----- $testbase log follows"
-	cat "$scratchdir/test.log"
-	echo "----- $testbase log ends"
-	if [ -f "$scratchdir/rsyncd.log" ]; then
-	    echo "----- $testbase rsyncd.log follows"
-	    cat "$scratchdir/rsyncd.log"
-	    echo "----- $testbase rsyncd.log ends"
-	fi
-    fi
-
     case $result in
     0)
 	echo "PASS    $testbase"
 	passed=`expr $passed + 1`
-	maybe_discard_scratch
+	discard_scratch
 	;;
     77)
-	# backticks will fill the whole file onto one line, which is a feature
-	whyskipped=`cat "$scratchdir/whyskipped"`
-	echo "SKIP    $testbase ($whyskipped)"
+	echo "SKIP    $testbase"
 	skipped=`expr $skipped + 1`
-	maybe_discard_scratch
+	discard_scratch
 	;;
     78)
         # It failed, but we expected that.  don't dump out error logs, 
@@ -252,8 +218,12 @@ do
 	;;
     *)
 	echo "FAIL    $testbase"
+	echo "----- $testbase failed: log follows"
+	cat "$scratchdir/test.log"
+	echo "----- $testbase log ends"
 	failed=`expr $failed + 1`
-	if [ "x$nopersist" = xyes ]; then
+	if [ "x$nopersist" = "xyes" ]
+	then
 	    exit 1
 	fi
     esac

sender.c

@@ -1,17 +1,17 @@
-/*
+/* 
    Copyright (C) Andrew Tridgell 1996
    Copyright (C) Paul Mackerras 1996
-
+   
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
-
+   
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
+   
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
@@ -20,86 +20,58 @@
 #include "rsync.h"
 
 extern int verbose;
-extern int do_xfers;
-extern int am_server;
-extern int am_daemon;
-extern int log_before_transfer;
-extern int log_format_has_i;
-extern int daemon_log_format_has_i;
+extern int remote_version;
 extern int csum_length;
-extern int io_error;
-extern int allowed_lull;
-extern int protocol_version;
-extern int remove_sent_files;
-extern int updating_basis_file;
-extern int make_backups;
-extern int do_progress;
-extern int inplace;
-extern int batch_fd;
-extern int write_batch;
 extern struct stats stats;
-extern struct file_list *the_file_list;
-extern char *log_format;
+extern int io_error;
+extern int dry_run;
+extern int am_server;
 
 
-/**
- * @file
- *
- * The sender gets checksums from the generator, calculates deltas,
- * and transmits them to the receiver.  The sender process runs on the
- * machine holding the source files.
- **/
-
-/**
- * Receive the checksums for a buffer
- **/
+/*
+  receive the checksums for a buffer
+  */
 static struct sum_struct *receive_sums(int f)
 {
 	struct sum_struct *s;
-	int32 i;
-	int lull_mod = allowed_lull * 5;
+	int i;
 	OFF_T offset = 0;
 
-	if (!(s = new(struct sum_struct)))
-		out_of_memory("receive_sums");
-
-	read_sum_head(f, s);
+	s = (struct sum_struct *)malloc(sizeof(*s));
+	if (!s) out_of_memory("receive_sums");
 
+	s->count = read_int(f);
+	s->n = read_int(f);
+	s->remainder = read_int(f);  
 	s->sums = NULL;
 
-	if (verbose > 3) {
-		rprintf(FINFO, "count=%.0f n=%ld rem=%ld\n",
-			(double)s->count, (long)s->blength, (long)s->remainder);
-	}
+	if (verbose > 3)
+		rprintf(FINFO,"count=%d n=%d rem=%d\n",
+			s->count,s->n,s->remainder);
 
-	if (s->count == 0)
+	if (s->count == 0) 
 		return(s);
 
-	if (!(s->sums = new_array(struct sum_buf, s->count)))
-		out_of_memory("receive_sums");
+	s->sums = (struct sum_buf *)malloc(sizeof(s->sums[0])*s->count);
+	if (!s->sums) out_of_memory("receive_sums");
 
-	for (i = 0; i < s->count; i++) {
+	for (i=0;i<s->count;i++) {
 		s->sums[i].sum1 = read_int(f);
-		read_buf(f, s->sums[i].sum2, s->s2length);
+		read_buf(f,s->sums[i].sum2,csum_length);
 
 		s->sums[i].offset = offset;
-		s->sums[i].flags = 0;
+		s->sums[i].i = i;
 
-		if (i == s->count-1 && s->remainder != 0)
+		if (i == s->count-1 && s->remainder != 0) {
 			s->sums[i].len = s->remainder;
-		else
-			s->sums[i].len = s->blength;
+		} else {
+			s->sums[i].len = s->n;
+		}
 		offset += s->sums[i].len;
 
-		if (allowed_lull && !(i % lull_mod))
-			maybe_send_keepalive();
-
-		if (verbose > 3) {
-			rprintf(FINFO,
-				"chunk[%d] len=%d offset=%.0f sum1=%08x\n",
-				i, s->sums[i].len, (double)s->sums[i].offset,
-				s->sums[i].sum1);
-		}
+		if (verbose > 3)
+			rprintf(FINFO,"chunk[%d] len=%d offset=%.0f sum1=%08x\n",
+				i,s->sums[i].len,(double)s->sums[i].offset,s->sums[i].sum1);
 	}
 
 	s->flength = offset;
@@ -107,274 +79,215 @@ static struct sum_struct *receive_sums(int f)
 	return s;
 }
 
-void successful_send(int ndx)
-{
-	char fname[MAXPATHLEN];
-	struct file_struct *file;
-	unsigned int offset;
 
-	if (ndx < 0 || ndx >= the_file_list->count)
-		return;
 
-	file = the_file_list->files[ndx];
-	/* The generator might tell us about symlinks we didn't send. */
-	if (!(file->flags & FLAG_SENT) && !S_ISLNK(file->mode))
-		return;
-	if (file->dir.root) {
-		offset = stringjoin(fname, sizeof fname,
-				    file->dir.root, "/", NULL);
-	} else
-		offset = 0;
-	f_name_to(file, fname + offset);
-	if (remove_sent_files && do_unlink(fname) == 0 && verbose > 1) {
-		rprintf(FINFO, "sender removed %s\n",
-			safe_fname(fname + offset));
-	}
-}
-
-static void write_ndx_and_attrs(int f_out, int ndx, int iflags,
-				uchar fnamecmp_type, char *buf, int len)
-{
-	write_int(f_out, ndx);
-	if (protocol_version < 29)
-		return;
-	write_shortint(f_out, iflags);
-	if (iflags & ITEM_BASIS_TYPE_FOLLOWS)
-		write_byte(f_out, fnamecmp_type);
-	if (iflags & ITEM_XNAME_FOLLOWS)
-		write_vstring(f_out, buf, len);
-}
-
-/* This is also used by receive.c with f_out = -1. */
-int read_item_attrs(int f_in, int f_out, int ndx, uchar *type_ptr,
-		    char *buf, int *len_ptr)
-{
-	int len;
-	uchar fnamecmp_type = FNAMECMP_FNAME;
-	int iflags = protocol_version >= 29 ? read_shortint(f_in)
-		   : ITEM_TRANSFER | ITEM_MISSING_DATA;
-
-	/* Handle the new keep-alive (no-op) packet. */
-	if (ndx == the_file_list->count && iflags == ITEM_IS_NEW)
-		;
-	else if (ndx < 0 || ndx >= the_file_list->count) {
-		rprintf(FERROR, "Invalid file index: %d (count=%d) [%s]\n",
-			ndx, the_file_list->count, who_am_i());
-		exit_cleanup(RERR_PROTOCOL);
-	} else if (iflags == ITEM_IS_NEW) {
-		rprintf(FERROR, "Invalid itemized flag word: %x [%s]\n",
-			iflags, who_am_i());
-		exit_cleanup(RERR_PROTOCOL);
-	}
-
-	if (iflags & ITEM_BASIS_TYPE_FOLLOWS)
-		fnamecmp_type = read_byte(f_in);
-	*type_ptr = fnamecmp_type;
-
-	if (iflags & ITEM_XNAME_FOLLOWS) {
-		if ((len = read_vstring(f_in, buf, MAXPATHLEN)) < 0)
-			exit_cleanup(RERR_PROTOCOL);
-	} else {
-		*buf = '\0';
-		len = -1;
-	}
-	*len_ptr = len;
-
-	if (iflags & ITEM_TRANSFER) {
-		if (!S_ISREG(the_file_list->files[ndx]->mode)) {
-			rprintf(FERROR,
-				"received request to transfer non-regular file: %d [%s]\n",
-				ndx, who_am_i());
-			exit_cleanup(RERR_PROTOCOL);
-		}
-	} else if (f_out >= 0) {
-		write_ndx_and_attrs(f_out, ndx, iflags,
-				    fnamecmp_type, buf, len);
-	}
-
-	return iflags;
-}
-
-void send_files(struct file_list *flist, int f_out, int f_in)
-{
+void send_files(struct file_list *flist,int f_out,int f_in)
+{ 
 	int fd = -1;
 	struct sum_struct *s;
-	struct map_struct *mbuf = NULL;
+	struct map_struct *buf = NULL;
 	STRUCT_STAT st;
-	char *fname2, fname[MAXPATHLEN];
-	char xname[MAXPATHLEN];
-	uchar fnamecmp_type;
-	int iflags, xlen;
+	char fname[MAXPATHLEN];  
+	int i;
 	struct file_struct *file;
-	int phase = 0, max_phase = protocol_version >= 29 ? 2 : 1;
+	int phase = 0;
+	extern struct stats stats;		
 	struct stats initial_stats;
-	int save_make_backups = make_backups;
-	int itemizing = am_daemon ? daemon_log_format_has_i
-		      : !am_server && log_format_has_i;
-	int f_xfer = write_batch < 0 ? batch_fd : f_out;
-	int i, j;
+	extern int write_batch;   /* dw */
+	extern int read_batch;    /* dw */
+	int checksums_match;   /* dw */
+	int buff_len;  /* dw */
+	char buff[CHUNK_SIZE];    /* dw */
+	int j;   /* dw */
+	int done;   /* dw */
 
 	if (verbose > 2)
-		rprintf(FINFO, "send_files starting\n");
+		rprintf(FINFO,"send_files starting\n");
 
 	while (1) {
-		unsigned int offset;
+		int offset=0;
 
 		i = read_int(f_in);
 		if (i == -1) {
-			if (++phase > max_phase)
-				break;
-			csum_length = SUM_LENGTH;
-			if (verbose > 2)
-				rprintf(FINFO, "send_files phase=%d\n", phase);
-			write_int(f_out, -1);
-			/* For inplace: redo phase turns off the backup
-			 * flag so that we do a regular inplace send. */
-			make_backups = 0;
-			continue;
+			if (phase==0 && remote_version >= 13) {
+				phase++;
+				csum_length = SUM_LENGTH;
+				write_int(f_out,-1);
+				if (verbose > 2)
+					rprintf(FINFO,"send_files phase=%d\n",phase);
+				continue;
+			}
+			break;
 		}
 
-		iflags = read_item_attrs(f_in, f_out, i, &fnamecmp_type,
-					 xname, &xlen);
-		if (iflags == ITEM_IS_NEW) /* no-op packet */
-			continue;
-
-		file = flist->files[i];
-		if (file->dir.root) {
-			/* N.B. We're sure that this fits, so offset is OK. */
-			offset = strlcpy(fname, file->dir.root, sizeof fname);
-			if (!offset || fname[offset-1] != '/')
-				fname[offset++] = '/';
-		} else
-			offset = 0;
-		fname2 = f_name_to(file, fname + offset);
-
-		if (verbose > 2)
-			rprintf(FINFO, "send_files(%d, %s)\n", i, fname);
-
-		if (!(iflags & ITEM_TRANSFER)) {
-			maybe_log_item(file, iflags, itemizing, xname);
-			continue;
-		}
-		if (phase == 2) {
-			rprintf(FERROR,
-				"got transfer request in phase 2 [%s]\n",
-				who_am_i());
+		if (i < 0 || i >= flist->count) {
+			rprintf(FERROR,"Invalid file index %d (count=%d)\n", 
+				i, flist->count);
 			exit_cleanup(RERR_PROTOCOL);
 		}
 
-		updating_basis_file = inplace && (protocol_version >= 29
-			? fnamecmp_type == FNAMECMP_FNAME : !make_backups);
+		file = flist->files[i];
 
-		stats.current_file_index = i;
 		stats.num_transferred_files++;
 		stats.total_transferred_size += file->length;
 
-		if (!do_xfers) { /* log the transfer */
-			if (!am_server && log_format)
-				log_item(file, &stats, iflags, NULL);
-			write_ndx_and_attrs(f_out, i, iflags, fnamecmp_type,
-					    xname, xlen);
+		fname[0] = 0;
+		if (file->basedir) {
+			strlcpy(fname,file->basedir,MAXPATHLEN);
+			if (strlen(fname) == MAXPATHLEN-1) {
+				io_error = 1;
+				rprintf(FERROR, "send_files failed on long-named directory %s\n",
+					fname);
+				return;
+			}
+			strlcat(fname,"/",MAXPATHLEN);
+			offset = strlen(file->basedir)+1;
+		}
+		strlcat(fname,f_name(file),MAXPATHLEN);
+	  
+		if (verbose > 2) 
+			rprintf(FINFO,"send_files(%d,%s)\n",i,fname);
+	  
+		if (dry_run) {	
+			if (!am_server) {
+				log_transfer(file, fname+offset);
+			}
+			write_int(f_out,i);
 			continue;
 		}
 
 		initial_stats = stats;
 
-		if (!(s = receive_sums(f_in))) {
-			io_error |= IOERR_GENERAL;
-			rprintf(FERROR, "receive_sums failed\n");
+		s = receive_sums(f_in);
+		if (!s) {
+			io_error = 1;
+			rprintf(FERROR,"receive_sums failed\n");
 			return;
 		}
 
-		fd = do_open(fname, O_RDONLY, 0);
-		if (fd == -1) {
-			if (errno == ENOENT) {
-				enum logcode c = am_daemon
-				    && protocol_version < 28 ? FERROR
-							     : FINFO;
-				io_error |= IOERR_VANISHED;
-				rprintf(c, "file has vanished: %s\n",
-					full_fname(fname));
-			} else {
-				io_error |= IOERR_GENERAL;
-				rsyserr(FERROR, errno,
-					"send_files failed to open %s",
-					full_fname(fname));
+		if (write_batch)
+		    write_batch_csum_info(&i,flist->count,s);
+	  
+		if (!read_batch) {
+			fd = do_open(fname, O_RDONLY, 0);
+			if (fd == -1) {
+				io_error = 1;
+				rprintf(FERROR,"send_files failed to open %s: %s\n",
+					fname,strerror(errno));
+				free_sums(s);
+				continue;
 			}
-			free_sums(s);
-			continue;
+	  
+			/* map the local file */
+			if (do_fstat(fd,&st) != 0) {
+				io_error = 1;
+				rprintf(FERROR,"fstat failed : %s\n",strerror(errno));
+				free_sums(s);
+				close(fd);
+				return;
+			}
+	  
+			if (st.st_size > 0) {
+				buf = map_file(fd,st.st_size);
+			} else {
+				buf = NULL;
+			}
+	  
+			if (verbose > 2)
+				rprintf(FINFO,"send_files mapped %s of size %.0f\n",
+					fname,(double)st.st_size);
+
+			write_int(f_out,i);
+	  
+			if (write_batch)
+				write_batch_delta_file((char *)&i,sizeof(i));
+
+			write_int(f_out,s->count);
+			write_int(f_out,s->n);
+			write_int(f_out,s->remainder);
 		}
-
-		/* map the local file */
-		if (do_fstat(fd, &st) != 0) {
-			io_error |= IOERR_GENERAL;
-			rsyserr(FERROR, errno, "fstat failed");
-			free_sums(s);
-			close(fd);
-			return;
+	  
+		if (verbose > 2)
+			if (!read_batch)
+			    rprintf(FINFO,"calling match_sums %s\n",fname);
+	  
+		if (!am_server) {
+			log_transfer(file, fname+offset);
 		}
 
-		if (st.st_size) {
-			int32 read_size = MAX(s->blength * 3, MAX_MAP_SIZE);
-			mbuf = map_file(fd, st.st_size, read_size, s->blength);
-		} else
-			mbuf = NULL;
-
-		if (verbose > 2) {
-			rprintf(FINFO, "send_files mapped %s of size %.0f\n",
-				safe_fname(fname), (double)st.st_size);
-		}
-
-		write_ndx_and_attrs(f_out, i, iflags, fnamecmp_type,
-				    xname, xlen);
-		write_sum_head(f_xfer, s);
-
-		if (verbose > 2) {
-			rprintf(FINFO, "calling match_sums %s\n",
-				safe_fname(fname));
-		}
-
-		if (log_before_transfer)
-			log_item(file, &initial_stats, iflags, NULL);
-		else if (!am_server && verbose && do_progress)
-			rprintf(FINFO, "%s\n", safe_fname(fname2));
-
 		set_compression(fname);
 
-		match_sums(f_xfer, s, mbuf, st.st_size);
-		if (do_progress)
-			end_progress(st.st_size);
+                if (read_batch) { /* dw */
+                   /* read checksums originally computed on sender side */
+                   read_batch_csum_info(i, s, &checksums_match);
+                   if (checksums_match) {
+                       read_batch_delta_file( (char *) &j, sizeof(int) );
+                       if (j != i) {    /* if flist index entries don't match*/ 
+                          rprintf(FINFO,"index mismatch in send_files\n");
+                          rprintf(FINFO,"read index = %d flist ndx = %d\n",j,i);
+                          close_batch_delta_file();
+                          close_batch_csums_file();
+                          exit_cleanup(1);
+                       }
+                       else {
+                         write_int(f_out,j);
+                         write_int(f_out,s->count);
+                         write_int(f_out,s->n);
+                         write_int(f_out,s->remainder);
+                         done=0;
+                         while (!done) {
+                            read_batch_delta_file( (char *) &buff_len, sizeof(int) );
+                            write_int(f_out,buff_len);
+                            if (buff_len == 0) {
+                               done = 1;
+                            }
+                            else {
+                               if (buff_len > 0) {
+                                  read_batch_delta_file(buff, buff_len);
+                                  write_buf(f_out,buff,buff_len);
+                               }
+                            }
+                         }  /* end while  */
+                         read_batch_delta_file( buff, MD4_SUM_LENGTH);
+                         write_buf(f_out, buff, MD4_SUM_LENGTH);
 
-		if (!log_before_transfer)
-			log_item(file, &initial_stats, iflags, NULL);
+                       }  /* j=i */
+                   } else {  /* not checksum match */
+                      rprintf (FINFO,"readbatch & checksums don't match\n");
+                      rprintf (FINFO,"filename=%s is being skipped\n",
+			       fname);
+                      continue;
+                   }
+                } else  {
+		    match_sums(f_out,s,buf,st.st_size);
+		    log_send(file, &initial_stats);
+                }
 
-		if (mbuf) {
-			j = unmap_file(mbuf);
-			if (j) {
-				io_error |= IOERR_GENERAL;
-				rsyserr(FERROR, j,
-					"read errors mapping %s",
-					full_fname(fname));
-			}
+		if (!read_batch) { /* dw */
+		    if (buf) unmap_file(buf);
+		    close(fd);
 		}
-		close(fd);
-
+	  
 		free_sums(s);
-
-		if (verbose > 2) {
-			rprintf(FINFO, "sender finished %s\n",
-				safe_fname(fname));
-		}
-
-		/* Flag that we actually sent this entry. */
-		file->flags |= FLAG_SENT;
+	  
+		if (verbose > 2)
+			rprintf(FINFO,"sender finished %s\n",fname);
 	}
-	make_backups = save_make_backups;
 
 	if (verbose > 2)
-		rprintf(FINFO, "send files finished\n");
+		rprintf(FINFO,"send files finished\n");
 
 	match_report();
 
-	write_int(f_out, -1);
+	write_int(f_out,-1);
+	if (write_batch || read_batch) { /* dw */
+	    close_batch_csums_file();
+	    close_batch_delta_file();
+	}
+
 }
+
+
+
+
+

support/Makefile

@@ -1,6 +0,0 @@
-all: savetransfer
-
-savetransfer: savetransfer.o
-
-clean:
-	rm -f *.o savetransfer

support/atomic-rsync

@@ -1,90 +0,0 @@
-#!/usr/bin/perl
-#
-# This script lets you update a hierarchy of files in an atomic way by
-# first creating a new hierarchy using rsync's --link-dest option, and
-# then swapping the hierarchy into place.  **See the usage message for
-# more details and some important caveats!**
-
-use strict;
-use Cwd 'abs_path';
-
-my $RSYNC_PROG = '/usr/bin/rsync';
-my $RM_PROG = '/bin/rm';
-
-my $dest_dir = $ARGV[-1];
-usage(1) if $dest_dir eq '' || $dest_dir =~ /^--/;
-
-if (!-d $dest_dir) {
-    print STDERR "$dest_dir is not a directory.\n\n";
-    usage(1);
-}
-
-if (@_ = grep(/^--(link|compare)-dest/, @ARGV)) {
-    $_ = join(' or ', @_);
-    print STDERR "You may not use $_ as an rsync option.\n\n";
-    usage(1);
-}
-
-$dest_dir = abs_path($dest_dir);
-if ($dest_dir eq '/') {
-    print STDERR 'You must not use "/" as the destination directory.', "\n\n";
-    usage(1);
-}
-
-my $old_dir = "$dest_dir~old~";
-my $new_dir = $ARGV[-1] = "$dest_dir~new~";
-
-system($RM_PROG, '-rf', $old_dir) if -d $old_dir;
-
-if (system($RSYNC_PROG, "--link-dest=$dest_dir", @ARGV)) {
-    if ($? == -1) {
-	print "failed to execute $RSYNC_PROG: $!\n";
-    } elsif ($? & 127) {
-	printf "child died with signal %d, %s coredump\n",
-	    ($? & 127),  ($? & 128) ? 'with' : 'without';
-    } else {
-	printf "child exited with value %d\n", $? >> 8;
-    }
-    exit $?;
-}
-
-rename($dest_dir, $old_dir) or die "Unable to rename $new_dir to $old_dir: $!";
-rename($new_dir, $dest_dir) or die "Unable to rename $new_dir to $dest_dir: $!";
-
-exit;
-
-
-sub usage
-{
-    my($ret) = @_;
-    my $fh = $ret ? *STDERR : *STDOUT;
-    print $fh <<EOT;
-Usage: atomic-rsync [RSYNC-OPTIONS] HOST:/SOURCE/DIR/ /DEST/DIR/
-       atomic-rsync [RSYNC-OPTIONS] HOST::MOD/DIR/ /DEST/DIR/
-
-This script lets you update a hierarchy of files in an atomic way by first
-creating a new hierarchy (using hard-links to leverage the existing files),
-and then swapping the new hierarchy into place.  You must be pulling files
-to a local directory, and that directory must already exist.  For example:
-
-    atomic-rsync -av host:/remote/files/ /local/files/
-
-This would make the transfer to the directory /local/files~new~ and then
-swap out /local/files at the end of the transfer by renaming it to
-/local/files~old~ and putting the new directory into its place.  The
-/local/files~old~ directory will be preserved until the next update, at
-which point it will be deleted.
-
-Do NOT specify this command:
-
-    atomic-rsync -av host:/remote/files /local/
-
-... UNLESS you want the entire /local dir to be swapped out!
-
-See the "rsync" command for its list of options.  You may not use the
---link-dest or --compare-dest options (since this script uses --link-dest
-to make the transfer efficient).  Also, the destination directory cannot
-be "/".
-EOT
-    exit $ret;
-}

support/cvs2includes

@@ -1,42 +0,0 @@
-#!/usr/bin/perl
-#
-# This script finds all CVS/Entries files in the current directory and below
-# and creates a local .cvsinclude file with non-inherited rules including each
-# checked-in file.  Then, use this option whenever using --cvs-exclude (-C):
-#
-# 	-f ': .cvsinclude'
-#
-# That ensures that all checked-in files/dirs are included in the transfer.
-# (You could alternately put ": .cvsinclude" into an .rsync-filter file and
-# use the -F option, which is easier to type.)
-#
-# The downside is that you need to remember to re-run cvs2includes whenever
-# You add a new file to the project.
-use strict;
-
-open(FIND, 'find . -name CVS -type d |') or die $!;
-while (<FIND>) {
-    chomp;
-    s#^\./##;
-
-    my $entries = "$_/Entries";
-    s/CVS$/.cvsinclude/;
-    my $filter = $_;
-
-    open(ENTRIES, $entries) or die "Unable to open $entries: $!\n";
-    my @includes;
-    while (<ENTRIES>) {
-	push(@includes, $1) if m#/(.+?)/#;
-    }
-    close ENTRIES;
-    if (@includes) {
-	open(FILTER, ">$filter") or die "Unable to write $filter: $!\n";
-	print FILTER '+ /', join("\n+ /", @includes), "\n";
-	close FILTER;
-	print "Updated $filter\n";
-    } elsif (-f $filter) {
-	unlink($filter);
-	print "Removed $filter\n";
-    }
-}
-close FIND;

support/mnt-excl

@@ -1,44 +0,0 @@
-#!/usr/bin/perl -w
-# This script takes a command-line arg of a source directory
-# that will be passed to rsync, and generates a set of excludes
-# that will exclude all mount points from the list.  This is
-# useful if you have "bind" mounts since the --one-file-system
-# option won't notice the transition to a different spot on
-# the same disk.  For example:
-#
-# mnt-excl /dir | rsync --exclude-from=- ... /dir /dest/
-# mnt-excl /dir/ | rsync --exclude-from=- ... /dir/ /dest/
-# ssh host mnt-excl /dir | rsync --exclude-from=- ... host:/dir /dest/
-#
-# Imagine that /dir/foo is a mount point: the first invocation of
-# mnt-excl would have output /dir/foo, while the second would have
-# output /foo (which are the properly anchored excludes).
-#
-# NOTE:  This script expects /proc/mounts to exist, but could be
-# easily adapted to read /etc/mtab or similar.
-#
-# ADDENDUM:  The addition of the --filter option (which has support for
-# absolute-anchored excludes) has made this script less useful than it
-# was.  Beginning with 2.6.4, you can achieve the effect of this script
-# through this command:
-#
-# awk '{print $2}' /proc/mounts | rsync -f 'merge,/- -' host:/dir /dest/
-
-use strict;
-use Cwd 'abs_path';
-
-my $file = '/proc/mounts';
-my $dir = shift || '/';
-$dir = abs_path($dir);
-$dir =~ s#([^/]*)$##;
-my $trailing = $1;
-$trailing = '' if $trailing eq '.' || !-d "$dir$trailing";
-$trailing .= '/' if $trailing ne '';
-
-open(IN, $file) or die "Unable to open $file: $!\n";
-while (<IN>) {
-    $_ = (split)[1];
-    next unless s#^\Q$dir$trailing\E##o && $_ ne '';
-    print "- /$trailing$_\n";
-}
-close IN;

support/rrsync

@@ -1,74 +0,0 @@
-#!/usr/bin/perl
-# Name: /usr/local/bin/rrsync (should also have a symlink in /usr/bin)
-# Purpose: Restricts rsync to subdirectory declared in .ssh/authorized_keys
-# Author: Joe Smith <js-cgi@inwap.com> 30-Sep-2004
-# Modified by Wayne Davison <wayned@samba.org> 12-Jan-2005
-
-use Socket;
-use constant LOGFILE => 'rrsync.log';
-my $Usage = <<EOM;
-Use 'command="$0 [-ro] SUBDIR"'
-	in front of lines in $ENV{HOME}/.ssh/authorized_keys
-EOM
-
-my $ro = (@ARGV and $ARGV[0] eq '-ro') ? shift : '';	# -ro = Read-Only
-my $subdir = shift;
-die "No subdirectory specified\n$Usage" unless defined $subdir;
-
-# The client uses "rsync -av -e ssh src/ server:dir/", and sshd on the server
-# executes this program when .ssh/authorized_keys has 'command="..."'.
-# For example:
-# command="rrsync logs/client" ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAzGhEeNlPr...
-# command="rrsync -ro results" ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAmkHG1WCjC...
-#
-# Format of the envrionment variables set by sshd:
-# SSH_ORIGINAL_COMMAND=rsync --server          -vlogDtpr --partial . dir # push
-# SSH_ORIGINAL_COMMAND=rsync --server --sender -vlogDtpr --partial . dir # pull
-# SSH_CONNECTION=client_addr client_port server_port
-
-my $command = $ENV{SSH_ORIGINAL_COMMAND};
-die "Not invoked via sshd\n$Usage"	unless defined $command;
-die "SSH_ORIGINAL_COMMAND='$command' is not rsync\n" unless $command =~ /^rsync\s/;
-die "$0 -ro: sending to read-only server not allowed\n"
-	if $ro and $command !~ /^rsync --server --sender /;
-die "$0 -ro: use of $1 with read-only server not allowed\n"
-	if $ro and $command =~ /\s(--remove-\S+)/;
-
-my ($cmd,$dir) = $command =~ /^(rsync\s+(?:-[-a-zA-Z]+\s+)+\.) ?("[^"]*"|[^\s"]*)$/;
-die "$0: invalid rsync-command syntax or options\n" if !defined $cmd;
-
-# Enforce default of $subdir instead of the normal $HOME default.
-my $orig = $dir;
-my @dirs;
-$dir =~ s/^"(.*?)"$/$1/;
-$dir =~ s/^\s+//;
-$dir =~ s/\s+$//;
-foreach (split(/(?<!\\)\s+/, $dir)) {
-  s/\\(\s)/$1/g;			# Unescape any escaped whitespace
-  if ($subdir eq '/') {			# Less checking for '/' access
-    $dir = '/' if $dir eq '';
-  } else {
-    s#^/##;				# Don't allow absolute paths
-    $_ = "$subdir/$_" unless m#^\Q$subdir\E(/|$)#;
-    1 while s#/\.\.(/|$)#/__/#g;	# Don't allow foo/../../etc
-  }
-  tr#-_/a-zA-Z0-9.,+@^%: #_#c;		# Don't allow '"&;|!=()[]{}<>*?#\$
-  s/(\s)/\\$1/g;			# Re-escape whitespace
-  push(@dirs, $_);
-}
-push(@dirs, $subdir) unless @dirs;
-$dir = join(' ', @dirs);
-
-if (-f LOGFILE and open LOG,'>>',LOGFILE) {
-  my ($mm,$hh) = (localtime)[1,2];
-  my $host = $ENV{SSH_CONNECTION} || 'unknown';
-  $host =~ s/ .*//;			# Keep only the client's IP addr
-  $host =~ s/^::ffff://;
-  $host = gethostbyaddr(inet_aton($host),AF_INET) || $host;
-  my $dir_result = $dir eq $orig ? " OK" : "> \"$dir\"";
-  printf LOG "%02d:%02d %-13s [%s] =%s\n", $hh, $mm, $host, $command, $dir_result;
-  close LOG;
-}
-
-exec "$cmd \"$dir\"" or die "exec($cmd \"$dir\") failed: $? $!";
-# Note: This assumes that the rsync protocol will not be maliciously hijacked.

support/rsyncstats

@@ -1,67 +1,72 @@
-#!/usr/bin/perl
+#! /usr/bin/perl
+# ---------------------------------------------------------------------------
+#
+# USAGE: rsyncstats <options>
+#
+# OPTIONS:
+#       -f <filename>   Use <filename> for the log file
+#       -h		include report on hourly traffic
+#       -d		include report on domain traffic
+#       -t		report on total traffic by section
+#       -D <domain>     report only on traffic from <domain>
+#       -l <depth>      Depth of path detail for sections
+#       -s <section>    Section to report on, For example: -s /pub will report
+#				only on paths under /pub
 #
 # This script parses the default logfile format produced by rsync when running
-# as a daemon with transfer logging enabled.  It also parses a slightly tweaked
-# version of the default format where %o has been replaced with %i.
-#
-# This script is derived from the xferstats script that comes with wuftpd.  See
-# the usage message at the bottom for the options it takes.
+# as a daemon with transfer logging enabled. It is derived from the xferstats
+# script that comes with wuftpd
 #
 # Andrew Tridgell, October 1998
+# rsync-bugs@samba.org
+#
+# ---------------------------------------------------------------------------
 
-use Getopt::Long;
-
-# You may wish to edit the next line to customize for your default log file.
+# edit the next line to customize for your default log file
 $usage_file = "/var/adm/rsyncd.log";
 
 # Edit the following lines for default report settings.
 # Entries defined here will be over-ridden by the command line.
 
-$hourly_report = 0; 
-$domain_report = 0;
-$total_report = 0;
-$depth_limit = 9999;
-$only_section = '';
+$opt_h = 1; 
+$opt_d = 0;
+$opt_t = 1;
+$opt_l = 2;
 
-&Getopt::Long::Configure('bundling');
-&usage if !&GetOptions(
-    'hourly-report|h' => \$hourly_report,
-    'domain-report|d' => \$domain_report,
-    'domain|D:s' => \$only_domain,
-    'total-report|t' => \$total_report,
-    'depth-limit|l:i' => \$depth_limit,
-    'real|r' => \$real,
-    'anon|a' => \$anon,
-    'section|s:s' => \$only_section,
-    'file|f:s' => \$usage_file,
-);
+require 'getopts.pl';
+&Getopts('f:rahdD:l:s:');
 
-$anon = 1 if !$real && !$anon;
+if ($opt_r) { $real = 1;}
+if ($opt_a) { $anon = 1;}
+if ($real == 0 && $anon == 0) { $anon = 1; }
+if ($opt_f) {$usage_file = $opt_f;}
 
-open(LOG, $usage_file) || die "Error opening usage log file: $usage_file\n";
+open (LOG,$usage_file) || die "Error opening usage log file: $usage_file\n";
 
-if ($only_domain) {
-    print "Transfer Totals include the '$only_domain' domain only.\n";
-    print "All other domains are filtered out for this report.\n\n";
-}
+if ($opt_D) {print "Transfer Totals include the '$opt_D' domain only.\n";
+	     print "All other domains are filtered out for this report.\n\n";}
 
-if ($only_section) {
-    print "Transfer Totals include the '$only_section' section only.\n";
-    print "All other sections are filtered out for this report.\n\n";
-}
+if ($opt_s) {print "Transfer Totals include the '$opt_s' section only.\n";
+	     print "All other sections are filtered out for this report.\n\n";}
 
 line: while (<LOG>) {
 
-   next unless ($day,$time,$op,$host,$module,$file,$bytes)
-      = m#^ (\d+/\d\d/\d\d)\s+(\d\d:\d\d:\d\d)\s+\[\d+\]\s+(send|recv|[<>]f\S+)\s+
-          (\S+)\s+\[\d+\.\d+\.\d+\.\d+\]\s+(\S+)\s+\(\S*\)\s+(.*)\s+(\d+) $ #x;
+   @line = split;
 
-   # TODO actually divide the data by into send/recv categories
-   if ($op =~ /^>/) {
-      $op = 'send';
-   } elsif ($op =~ /^</) {
-      $op = 'recv';
-   }
+   $day = $line[0];
+   $time = $line[1];
+   $pid = $line[2];
+   $op = $line[3];
+   $host = $line[4];
+   $ip = $line[5];
+   $module = $line[6];
+   $user = $line[7];
+   $file = $line[8];
+   $bytes = $line[9];
+
+   next if ($#line != 9);
+
+   next if ($op != "send" && $op != "recv");
 
    $daytime = $day;
    $hour = substr($time,0,2); 
@@ -73,13 +78,11 @@ line: while (<LOG>) {
    @path = split(/\//, $file);
 
    $pathkey = "";
-   for ($i=0; $i <= $#path && $i <= $depth_limit; $i++) {
+   for ($i=0; $i <= $#path && $i <= $opt_l;$i++) {
 	$pathkey = $pathkey . "/" . $path[$i];
    }
 
-   if ($only_section ne '') {
-       next unless (substr($pathkey,0,length($only_section)) eq $only_section);
-   }
+   next if (substr($pathkey,0,length("$opt_s")) ne "$opt_s");
 
    $host =~ tr/A-Z/a-z/;
 
@@ -89,12 +92,12 @@ line: while (<LOG>) {
    if ( int($address[0]) > 0 || $#address < 2 )
       { $domain = "unresolved"; }
 
-   if ($only_domain ne '') {
-       next unless (substr($domain,0,length($only_domain)) eq $only_domain);
+   if ($opt_D) {
+       next unless (substr($domain,0,length("$opt_D")) eq "$opt_D");
    }
 
 
-#   printf("c=%d day=%s bytes=%d file=%s path=%s\n", 
+#   printf ("c=%d day=%s bytes=%d file=%s path=%s\n", 
 #	   $#line, $daytime, $bytes, $file, $pathkey);
 
    $xferfiles++;                                # total files sent
@@ -114,20 +117,20 @@ line: while (<LOG>) {
 }
 close LOG;
 
-#@syslist = keys %systemfiles;
-@dates = sort datecompare keys %xferbytes;
+@syslist = keys(systemfiles);
+@dates = sort datecompare keys(xferbytes);
 
 if ($xferfiles == 0) {die "There was no data to process.\n";}
 
 
 print "TOTALS FOR SUMMARY PERIOD ", $dates[0], " TO ", $dates[$#dates], "\n\n";
-printf("Files Transmitted During Summary Period  %12.0f\n", $xferfiles);
-printf("Bytes Transmitted During Summary Period  %12.0f\n", $xferbytes); 
-#printf("Systems Using Archives                   %12.0f\n\n", $#syslist+1);
+printf ("Files Transmitted During Summary Period  %12.0f\n", $xferfiles);
+printf ("Bytes Transmitted During Summary Period  %12.0f\n", $xferbytes); 
+printf ("Systems Using Archives                   %12.0f\n\n", $#syslist+1);
 
-printf("Average Files Transmitted Daily          %12.0f\n",
+printf ("Average Files Transmitted Daily          %12.0f\n",
    $xferfiles / ($#dates + 1));
-printf("Average Bytes Transmitted Daily          %12.0f\n",
+printf ("Average Bytes Transmitted Daily          %12.0f\n",
    $xferbytes / ($#dates + 1));
 
 format top1 =
@@ -147,7 +150,7 @@ $date,           $nfiles,    $nbytes/(1024*1024), $pctfiles,  $pctbytes
 $^ = top1;
 $~ = line1;
 
-foreach $date (sort datecompare keys %xferbytes) {
+foreach $date ( sort datecompare keys(xferbytes) ) {
 
    $nfiles   = $xferfiles{$date};
    $nbytes   = $xferbytes{$date};
@@ -156,7 +159,7 @@ foreach $date (sort datecompare keys %xferbytes) {
    write;
 }
 
-if ($total_report) {
+if ($opt_t) {
 format top2 =
 
 Total Transfers from each Archive Section (By bytes)
@@ -176,7 +179,7 @@ $- = 0;
 $^ = top2;
 $~ = line2;
 
-foreach $section (sort bytecompare keys %groupfiles) {
+foreach $section ( sort bytecompare keys(groupfiles) ) {
 
    $files = $groupfiles{$section};
    $bytes = $groupbytes{$section};
@@ -190,7 +193,7 @@ if ( $xferfiles < 1 ) { $xferfiles = 1; }
 if ( $xferbytes < 1 ) { $xferbytes = 1; }
 }
 
-if ($domain_report) {
+if ($opt_d) {
 format top3 =
 
 Total Transfer Amount By Domain
@@ -209,7 +212,7 @@ $- = 0;
 $^ = top3;
 $~ = line3;
 
-foreach $domain (sort domnamcompare keys %domainfiles) {
+foreach $domain ( sort domnamcompare keys(domainfiles) ) {
 
    if ( $domainsecs{$domain} < 1 ) { $domainsecs{$domain} = 1; }
 
@@ -223,7 +226,7 @@ foreach $domain (sort domnamcompare keys %domainfiles) {
 
 }
 
-if ($hourly_report) {
+if ($opt_h) {
 
 format top8 =
 
@@ -245,7 +248,7 @@ $- = 0;
 $^ = top8;
 $~ = line8;
 
-foreach $hour (sort keys %xfertbytes) {
+foreach $hour ( sort keys(xfertbytes) ) {
 
    $nfiles   = $xfertfiles{$hour};
    $nbytes   = $xfertbytes{$hour};
@@ -281,19 +284,3 @@ sub faccompare {
 
 }
 
-sub usage
-{
-    die <<EOT;
-USAGE: rsyncstats [options]
-
-OPTIONS:
-  -f FILENAME   Use FILENAME for the log file.
-  -h            Include report on hourly traffic.
-  -d            Include report on domain traffic.
-  -t            Report on total traffic by section.
-  -D DOMAIN     Report only on traffic from DOMAIN.
-  -l DEPTH      Set DEPTH of path detail for sections.
-  -s SECTION    Set SECTION to report on. For example, "-s /pub"
-                will report only on paths under "/pub".
-EOT
-}

support/savetransfer.c

@@ -1,178 +0,0 @@
-/* This program can record the stream of data flowing to or from a program.
- * This allows it to be used to check that rsync's data that is flowing
- * through a remote shell is not being corrupted (for example).
- *
- * Usage: savetransfer [-i|-o] OUTPUT_FILE PROGRAM [ARGS...]
- * -i  Save the input going to PROGRAM to the OUTPUT_FILE
- * -o  Save the output coming from PROGRAM to the OUTPUT_FILE
- *
- * If you want to capture the flow of data for an rsync command, use one of
- * the following commands (the first two are push commands, the last two are
- * pull commands):
- *
- * rsync -av --rsh="savetransfer -i /tmp/from.sender ssh"
- *   --rsync-path="savetransfer -i /tmp/to.receiver rsync" FILES HOST:DEST
- *
- * rsync -av --rsh="savetransfer -o /tmp/to.sender ssh"
- *   --rsync-path="savetransfer -o /tmp/from.generator rsync" FILES HOST:DEST
- *
- * rsync -av --rsh="savetransfer -i /tmp/from.generator ssh"
- *   --rsync-path="savetransfer -i /tmp/to.sender rsync" HOST:FILES DEST
- *
- * rsync -av --rsh="savetransfer -o /tmp/to.receiver ssh"
- *   --rsync-path="savetransfer -o /tmp/from.sender rsync" HOST:FILES DEST
- *
- * Note that this program aborts after 30 seconds of inactivity, so you'll need
- * to change it if that is not enough dead time for your transfer.  Also, some
- * of the above commands will not notice that the transfer is done (if we're
- * saving the input to a PROGRAM and the PROGRAM goes away:  we won't notice
- * that it's gone unless more data comes in) -- when this happens it will delay
- * at the end of the transfer until the timeout period expires.
- */
-
-#include "../rsync.h"
-
-#define TIMEOUT_SECONDS 30
-
-void run_program(char **command);
-
-char buf[4096];
-int save_data_from_program = 0;
-
-int
-main(int argc, char *argv[])
-{
-    int fd_file, len;
-    struct timeval tv;
-    fd_set fds;
-
-    argv++;
-    if (--argc && argv[0][0] == '-') {
-	if (argv[0][1] == 'o')
-	    save_data_from_program = 1;
-	else if (argv[0][1] == 'i')
-	    save_data_from_program = 0;
-	else {
-	    fprintf(stderr, "Unknown option: %s\n", argv[0]);
-	    exit(1);
-	}
-	argv++;
-	argc--;
-    }
-    if (argc < 2) {
-	fprintf(stderr, "Usage: savetransfer [-i|-o] OUTPUT_FILE PROGRAM [ARGS...]\n");
-	fprintf(stderr, "-i  Save the input going to PROGRAM to the OUTPUT_FILE\n");
-	fprintf(stderr, "-o  Save the output coming from PROGRAM to the OUTPUT_FILE\n");
-	exit(1);
-    }
-    if ((fd_file = open(*argv, O_WRONLY|O_TRUNC|O_CREAT|O_BINARY, 0644)) < 0) {
-	fprintf(stderr, "Unable to write to `%s': %s\n", *argv, strerror(errno));
-	exit(1);
-    }
-    set_blocking(fd_file);
-
-    signal(SIGPIPE, SIG_IGN);
-
-    run_program(argv + 1);
-
-#if defined HAVE_SETMODE && O_BINARY
-    setmode(STDIN_FILENO, O_BINARY);
-    setmode(STDOUT_FILENO, O_BINARY);
-#endif
-    set_nonblocking(STDIN_FILENO);
-    set_blocking(STDOUT_FILENO);
-
-    while (1) {
-	FD_ZERO(&fds);
-	FD_SET(STDIN_FILENO, &fds);
-	tv.tv_sec = TIMEOUT_SECONDS;
-	tv.tv_usec = 0;
-	if (!select(STDIN_FILENO+1, &fds, NULL, NULL, &tv))
-	    break;
-	if (!FD_ISSET(STDIN_FILENO, &fds))
-	    break;
-	if ((len = read(STDIN_FILENO, buf, sizeof buf)) <= 0)
-	    break;
-	if (write(STDOUT_FILENO, buf, len) != len) {
-	    fprintf(stderr, "Failed to write data to stdout: %s\n", strerror(errno));
-	    exit(1);
-	}
-	if (write(fd_file, buf, len) != len) {
-	    fprintf(stderr, "Failed to write data to fd_file: %s\n", strerror(errno));
-	    exit(1);
-	}
-    }
-    return 0;
-}
-
-void
-run_program(char **command)
-{
-    int pipe_fds[2], ret;
-    pid_t pid;
-
-    if (pipe(pipe_fds) < 0) {
-	fprintf(stderr, "pipe failed: %s\n", strerror(errno));
-	exit(1);
-    }
-
-    if ((pid = fork()) < 0) {
-	fprintf(stderr, "fork failed: %s\n", strerror(errno));
-	exit(1);
-    }
-
-    if (pid == 0) {
-	if (save_data_from_program)
-	    ret = dup2(pipe_fds[1], STDOUT_FILENO);
-	else
-	    ret = dup2(pipe_fds[0], STDIN_FILENO);
-	if (ret < 0) {
-	    fprintf(stderr, "Failed to dup (in child): %s\n", strerror(errno));
-	    exit(1);
-	}
-	close(pipe_fds[0]);
-	close(pipe_fds[1]);
-	set_blocking(STDIN_FILENO);
-	set_blocking(STDOUT_FILENO);
-	execvp(command[0], command);
-	fprintf(stderr, "Failed to exec %s: %s\n", command[0], strerror(errno));
-	exit(1);
-    }
-
-    if (save_data_from_program)
-	ret = dup2(pipe_fds[0], STDIN_FILENO);
-    else
-	ret = dup2(pipe_fds[1], STDOUT_FILENO);
-    if (ret < 0) {
-	fprintf(stderr, "Failed to dup (in parent): %s\n", strerror(errno));
-	exit(1);
-    }
-    close(pipe_fds[0]);
-    close(pipe_fds[1]);
-}
-
-void
-set_nonblocking(int fd)
-{
-    int val;
-
-    if ((val = fcntl(fd, F_GETFL, 0)) == -1)
-	return;
-    if (!(val & NONBLOCK_FLAG)) {
-	val |= NONBLOCK_FLAG;
-	fcntl(fd, F_SETFL, val);
-    }
-}
-
-void
-set_blocking(int fd)
-{
-    int val;
-
-    if ((val = fcntl(fd, F_GETFL, 0)) < 0)
-	return;
-    if (val & NONBLOCK_FLAG) {
-	val &= ~NONBLOCK_FLAG;
-	fcntl(fd, F_SETFL, val);
-    }
-}

syscall.c

@@ -1,6 +1,5 @@
 /* 
    Copyright (C) Andrew Tridgell 1998
-   Copyright (C) 2002 by Martin Pool
    
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -17,53 +16,37 @@
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
-/**
- * @file syscall.c
- *
- * Syscall wrappers to ensure that nothing gets done in dry_run mode
- * and to handle system peculiarities.
- **/
+/*
+  syscall wrappers to ensure that nothing gets done in dry_run mode
+  */
 
 #include "rsync.h"
 
-#if !defined MKNOD_CREATES_SOCKETS && defined HAVE_SYS_UN_H
-#include <sys/un.h>
-#endif
-
 extern int dry_run;
 extern int read_only;
 extern int list_only;
-extern int preserve_perms;
 
-#define RETURN_ERROR_IF(x,e) \
-	do { \
-		if (x) { \
-			errno = (e); \
-			return -1; \
-		} \
-	} while (0)
-
-#define RETURN_ERROR_IF_RO_OR_LO RETURN_ERROR_IF(read_only || list_only, EROFS)
+#define CHECK_RO if (read_only || list_only) {errno = EROFS; return -1;}
 
 int do_unlink(char *fname)
 {
 	if (dry_run) return 0;
-	RETURN_ERROR_IF_RO_OR_LO;
+	CHECK_RO
 	return unlink(fname);
 }
 
 int do_symlink(char *fname1, char *fname2)
 {
 	if (dry_run) return 0;
-	RETURN_ERROR_IF_RO_OR_LO;
+	CHECK_RO
 	return symlink(fname1, fname2);
 }
 
-#ifdef HAVE_LINK
+#if HAVE_LINK
 int do_link(char *fname1, char *fname2)
 {
 	if (dry_run) return 0;
-	RETURN_ERROR_IF_RO_OR_LO;
+	CHECK_RO
 	return link(fname1, fname2);
 }
 #endif
@@ -71,170 +54,111 @@ int do_link(char *fname1, char *fname2)
 int do_lchown(const char *path, uid_t owner, gid_t group)
 {
 	if (dry_run) return 0;
-	RETURN_ERROR_IF_RO_OR_LO;
-#ifndef HAVE_LCHOWN
-#define lchown chown
-#endif
+	CHECK_RO
 	return lchown(path, owner, group);
 }
 
+#if HAVE_MKNOD
 int do_mknod(char *pathname, mode_t mode, dev_t dev)
 {
 	if (dry_run) return 0;
-	RETURN_ERROR_IF_RO_OR_LO;
-#if !defined MKNOD_CREATES_FIFOS && defined HAVE_MKFIFO
-	if (S_ISFIFO(mode))
-		return mkfifo(pathname, mode);
-#endif
-#if !defined MKNOD_CREATES_SOCKETS && defined HAVE_SYS_UN_H
-	if (S_ISSOCK(mode)) {
-		int sock;
-		struct sockaddr_un saddr;
-		unsigned int len;
-
-		saddr.sun_family = AF_UNIX;
-		len = strlcpy(saddr.sun_path, pathname, sizeof saddr.sun_path);
-#ifdef HAVE_SOCKADDR_UN_LEN
-		saddr.sun_len = len >= sizeof saddr.sun_path
-			      ? sizeof saddr.sun_path : len + 1;
-#endif
-
-		if ((sock = socket(PF_UNIX, SOCK_STREAM, 0)) < 0
-		    || (unlink(pathname) < 0 && errno != ENOENT)
-		    || (bind(sock, (struct sockaddr*)&saddr, sizeof saddr)) < 0)
-			return -1;
-		close(sock);
-		return do_chmod(pathname, mode);
-	}
-#endif
-#ifdef HAVE_MKNOD
+	CHECK_RO
 	return mknod(pathname, mode, dev);
-#else
-	return -1;
-#endif
 }
+#endif
 
 int do_rmdir(char *pathname)
 {
 	if (dry_run) return 0;
-	RETURN_ERROR_IF_RO_OR_LO;
+	CHECK_RO
 	return rmdir(pathname);
 }
 
 int do_open(char *pathname, int flags, mode_t mode)
 {
 	if (flags != O_RDONLY) {
-		RETURN_ERROR_IF(dry_run, 0);
-		RETURN_ERROR_IF_RO_OR_LO;
+	    if (dry_run) return -1;
+	    CHECK_RO
 	}
+#ifdef O_BINARY
+	/* for Windows */
+	flags |= O_BINARY;
+#endif
+	/* some systems can't handle a double / */
+	if (pathname[0] == '/' && pathname[1] == '/') pathname++;
 
-	return open(pathname, flags | O_BINARY, mode);
+	return open(pathname, flags, mode);
 }
 
-#ifdef HAVE_CHMOD
+#if HAVE_CHMOD
 int do_chmod(const char *path, mode_t mode)
 {
-	int code;
 	if (dry_run) return 0;
-	RETURN_ERROR_IF_RO_OR_LO;
-	code = chmod(path, mode);
-	if (code != 0 && preserve_perms)
-	    return code;
-	return 0;
+	CHECK_RO
+	return chmod(path, mode);
 }
 #endif
 
 int do_rename(char *fname1, char *fname2)
 {
 	if (dry_run) return 0;
-	RETURN_ERROR_IF_RO_OR_LO;
+	CHECK_RO
 	return rename(fname1, fname2);
 }
 
-
-void trim_trailing_slashes(char *name)
-{
-	int l;
-	/* Some BSD systems cannot make a directory if the name
-	 * contains a trailing slash.
-	 * <http://www.opensource.apple.com/bugs/X/BSD%20Kernel/2734739.html> */
-	
-	/* Don't change empty string; and also we can't improve on
-	 * "/" */
-	
-	l = strlen(name);
-	while (l > 1) {
-		if (name[--l] != '/')
-			break;
-		name[l] = '\0';
-	}
-}
-
-
 int do_mkdir(char *fname, mode_t mode)
 {
 	if (dry_run) return 0;
-	RETURN_ERROR_IF_RO_OR_LO;
-	trim_trailing_slashes(fname);	
+	CHECK_RO
 	return mkdir(fname, mode);
 }
 
-
 /* like mkstemp but forces permissions */
 int do_mkstemp(char *template, mode_t perms)
 {
-	RETURN_ERROR_IF(dry_run, 0);
-	RETURN_ERROR_IF(read_only, EROFS);
+	if (dry_run) return -1;
+	if (read_only) {errno = EROFS; return -1;}
 
-#if defined HAVE_SECURE_MKSTEMP && defined HAVE_FCHMOD && (!defined HAVE_OPEN64 || defined HAVE_MKSTEMP64)
+#if defined(HAVE_SECURE_MKSTEMP) && defined(HAVE_FCHMOD)
 	{
 		int fd = mkstemp(template);
-		if (fd == -1)
-			return -1;
-		if (fchmod(fd, perms) != 0 && preserve_perms) {
-			int errno_save = errno;
+		if (fd == -1) return -1;
+		if (fchmod(fd, perms) != 0) {
 			close(fd);
 			unlink(template);
-			errno = errno_save;
 			return -1;
 		}
-#if defined HAVE_SETMODE && O_BINARY
-		setmode(fd, O_BINARY);
-#endif
 		return fd;
 	}
 #else
-	if (!mktemp(template))
-		return -1;
+	if (!mktemp(template)) return -1;
 	return do_open(template, O_RDWR|O_EXCL|O_CREAT, perms);
 #endif
 }
 
 int do_stat(const char *fname, STRUCT_STAT *st)
 {
-#ifdef USE_STAT64_FUNCS
+#if HAVE_OFF64_T
 	return stat64(fname, st);
 #else
 	return stat(fname, st);
 #endif
 }
 
+#if SUPPORT_LINKS
 int do_lstat(const char *fname, STRUCT_STAT *st)
 {
-#ifdef SUPPORT_LINKS
-# ifdef USE_STAT64_FUNCS
+#if HAVE_OFF64_T
 	return lstat64(fname, st);
-# else
-	return lstat(fname, st);
-# endif
 #else
-	return do_stat(fname, st);
+	return lstat(fname, st);
 #endif
 }
+#endif
 
 int do_fstat(int fd, STRUCT_STAT *st)
 {
-#ifdef USE_STAT64_FUNCS
+#if HAVE_OFF64_T
 	return fstat64(fd, st);
 #else
 	return fstat(fd, st);
@@ -243,7 +167,7 @@ int do_fstat(int fd, STRUCT_STAT *st)
 
 OFF_T do_lseek(int fd, OFF_T offset, int whence)
 {
-#ifdef HAVE_LSEEK64
+#if HAVE_OFF64_T
 	off64_t lseek64();
 	return lseek64(fd, offset, whence);
 #else
@@ -251,9 +175,20 @@ OFF_T do_lseek(int fd, OFF_T offset, int whence)
 #endif
 }
 
+#ifdef USE_MMAP
+void *do_mmap(void *start, int len, int prot, int flags, int fd, OFF_T offset)
+{
+#if HAVE_OFF64_T
+	return mmap64(start, len, prot, flags, fd, offset);
+#else
+	return mmap(start, len, prot, flags, fd, offset);
+#endif
+}
+#endif
+
 char *d_name(struct dirent *di)
 {
-#ifdef HAVE_BROKEN_READDIR
+#if HAVE_BROKEN_READDIR
 	return (di->d_name - 2);
 #else
 	return di->d_name;

t_stub.c

@@ -1,81 +0,0 @@
-/*  -*- c-file-style: "linux" -*-
- * 
- * Copyright (C) 2001, 2002 by Martin Pool <mbp@samba.org>
- *
- * This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include "rsync.h"
-
-/**
- * @file t_stub.c
- *
- * This file contains really simple implementations for rsync global
- * functions, so that module test harnesses can run standalone.
- **/
-
-int modify_window = 0;
-int module_id = -1;
-char *partial_dir;
-struct filter_list_struct server_filter_list;
-
- void rprintf(UNUSED(enum logcode code), const char *format, ...)
-{
-	va_list ap;
-	va_start(ap, format);
-	vfprintf(stderr, format, ap);
-	va_end(ap);
-}
-
- void rsyserr(UNUSED(enum logcode code), int errcode, const char *format, ...)
-{
-	va_list ap;
-	fputs(RSYNC_NAME ": ", stderr);
-	va_start(ap, format);
-	vfprintf(stderr, format, ap);
-	va_end(ap);
-	fprintf(stderr, ": %s (%d)\n", strerror(errcode), errcode);
-}
-
- void _exit_cleanup(int code, const char *file, int line)
-{
-	fprintf(stderr, "exit(%d): %s(%d)\n",
-		code, file, line);
-	exit(code);
-}
-
- int check_filter(UNUSED(struct filter_list_struct *listp), UNUSED(char *name),
-		   UNUSED(int name_is_dir))
-{
-	/* This function doesn't really get called in this test context, so
-	 * just return 0. */
-	return 0;
-}
-
- char *lp_name(UNUSED(int mod))
-{
-    return NULL;
-}
-
- BOOL lp_use_chroot(UNUSED(int mod))
-{
-    return 0;
-}
-
- char *lp_path(UNUSED(int mod))
-{
-    return NULL;
-}
-

t_unsafe.c

@@ -1,46 +0,0 @@
-/*
- * Copyright (C) 2002 by Martin Pool
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- * 
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/**
- * @file 
- *
- * Test harness for unsafe_symlink().  Not linked into @c rsync itself.
- *
- * Prints either "safe" or "unsafe" depending on the two arguments.
- * Always returns 0 unless something extraordinary happens.
- **/
-
-#include "rsync.h"
-
-int dry_run, read_only, list_only, verbose;
-int preserve_perms = 0;
-
-
-int
-main(int argc, char **argv)
-{
-	if (argc != 3) {
-		fprintf(stderr, "usage: t_unsafe LINKDEST SRCDIR\n");
-		return 1;
-	}
-
-	printf("%s\n",
-	       unsafe_symlink(argv[1], argv[2]) ? "unsafe" : "safe");
-	
-	return 0;
-}

test.sh

@@ -0,0 +1,173 @@
+#!/bin/sh
+
+# Copyright (C) 1998,1999 Philip Hands <phil@hands.com>
+#
+# This program is distributable under the terms of the GNU GPL (see COPYING)
+#
+# This is a simple test script that tests a few rsync
+# features to make sure I haven't broken them before a release.
+#
+#
+
+# check if we are running under debian-test, and change behaviour to suit
+if test -n "${DEBIANTEST_LIB}" ; then
+  # make sure rsync is installed
+  test -e /usr/bin/rsync || exit 0
+  
+  . ${DEBIANTEST_LIB}/functions.sh
+  Debian=1
+else
+  cat <<EOF
+
+This set of tests is not completely portable. It is intended for developers
+not for end users. You may experience failures on some platforms that
+do not indicate a problem with rsync.
+
+EOF
+
+RSYNC=`pwd`/rsync
+
+  runtest() {
+    echo -n "Test $1: "
+    eval "$2"
+  }
+  printmsg() {
+    echo ""
+    echo "**** ${1}^G ****"
+    echo ""  
+  }
+fi
+
+TMP=/tmp/rsync-test.$$
+FROM=${TMP}/from
+TO=${TMP}/to
+F1=text1
+LOG=${TMP}/log
+
+mkdir $TMP
+mkdir $FROM
+mkdir $TO
+
+# set up test data
+touch ${FROM}/empty
+mkdir ${FROM}/emptydir
+ps ax > ${FROM}/pslist
+echo -n "This file has no trailing lf" > ${FROM}/nolf
+ln -s nolf ${FROM}/nolf-symlink
+
+# Gather some random text.  We need files that will exist and be
+# publicly readable on all platforms: hopefully this will work.
+cat /etc/*tab /etc/services /etc/*.conf /etc/*rc > ${FROM}/${F1}
+
+mkdir ${FROM}/dir
+cp ${FROM}/${F1} ${FROM}/dir/
+mkdir ${FROM}/dir/subdir
+mkdir ${FROM}/dir/subdir/subsubdir
+ls -ltr /etc > ${FROM}/dir/subdir/subsubdir/etc-ltr-list
+mkdir ${FROM}/dir/subdir/subsubdir2
+ls -lt /bin > ${FROM}/dir/subdir/subsubdir2/bin-lt-list
+
+checkit() {
+  testnum=`expr 0${testnum} + 1`
+  log=${LOG}.${testnum}
+  failed=
+  echo "Running: \"$1\""  >${log}
+  echo "">>${log}
+  eval "$1"  >>${log} 2>&1
+  status=$?
+  if [ $status != 0 ]; then
+    failed="YES";
+  fi
+  echo "-------------">>${log}
+  echo "check how the files compare with diff:">>${log}
+  echo "">>${log}
+  diff -ur $2 $3 >>${log} 2>&1 || failed=YES
+  echo "-------------">>${log}
+  echo "check how the directory listings compare with diff:">>${log}
+  echo "">>${log}
+  ( cd $2 ; ls -laR ) > ${TMP}/ls-from 2>>${log}
+  ( cd $3 ; ls -laR ) > ${TMP}/ls-to  2>>${log}
+  diff -u ${TMP}/ls-from ${TMP}/ls-to >>${log} 2>&1 || failed=YES
+  if [ -z "${failed}" ] ; then
+    test -z "${Debian}" && echo "	done."
+    rm $log
+    return 0
+  else
+    if test -n "${Debian}" ; then
+      cat ${log}
+      rm ${log}
+    else
+      echo "	FAILED (test # ${testnum} status=$status)."
+    fi
+    return 1
+  fi
+}
+
+
+checkforlogs() {
+  # skip it if we're under debian-test
+  if test -n "${Debian}" ; then return 0 ; fi
+
+  if [ -f $1 ] ; then
+    cat <<EOF
+
+Failures have occured.
+
+You can find the output of the tests in these files:
+  $@
+
+Please hit <RETURN>
+EOF
+  read input
+  else
+
+    rm -rf ${TMP}
+    echo ""
+    echo "Tests Completed Successfully :-)"
+  fi
+}
+
+# Main script starts here
+
+runtest "basic operation" 'checkit "$RSYNC -av ${FROM}/ ${TO}" ${FROM}/ ${TO}'
+
+ln ${FROM}/pslist ${FROM}/dir
+runtest "hard links" 'checkit "$RSYNC -avH ${FROM}/ ${TO}" ${FROM}/ ${TO}'
+
+rm ${TO}/${F1}
+runtest "one file" 'checkit "$RSYNC -avH ${FROM}/ ${TO}" ${FROM}/ ${TO}'
+
+echo "extra line" >> ${TO}/${F1}
+runtest "extra data" 'checkit "$RSYNC -avH ${FROM}/ ${TO}" ${FROM}/ ${TO}'
+
+cp ${FROM}/${F1} ${TO}/ThisShouldGo
+runtest " --delete" 'checkit "$RSYNC --delete -avH ${FROM}/ ${TO}" ${FROM}/ ${TO}'
+
+LONGDIR=${FROM}/This-is-a-directory-with-a-stupidly-long-name-created-in-an-attempt-to-provoke-an-error-found-in-2.0.11-that-should-hopefully-never-appear-again-if-this-test-does-its-job/This-is-a-directory-with-a-stupidly-long-name-created-in-an-attempt-to-provoke-an-error-found-in-2.0.11-that-should-hopefully-never-appear-again-if-this-test-does-its-job/This-is-a-directory-with-a-stupidly-long-name-created-in-an-attempt-to-provoke-an-error-found-in-2.0.11-that-should-hopefully-never-appear-again-if-this-test-does-its-job
+mkdir -p ${LONGDIR}
+date > ${LONGDIR}/1
+ls -la / > ${LONGDIR}/2
+runtest "long paths" 'checkit "$RSYNC --delete -avH ${FROM}/ ${TO}" ${FROM}/ ${TO}'
+
+if type ssh >/dev/null 2>&1; then
+  if [ "`ssh -o'BatchMode yes' localhost echo yes 2>/dev/null`" = "yes" ]; then
+  rm -rf ${TO}
+    runtest "ssh: basic test" 'checkit "$RSYNC -avH -e ssh --rsync-path=$RSYNC ${FROM}/ localhost:${TO}" ${FROM}/ ${TO}'
+
+    mv ${TO}/${F1} ${TO}/ThisShouldGo
+    runtest "ssh: renamed file" 'checkit "$RSYNC --delete -avH -e ssh --rsync-path=$RSYNC ${FROM}/ localhost:${TO}" ${FROM}/ ${TO}'
+  else
+  printmsg "Skipping SSH tests because ssh conection to localhost not authorised"
+  fi
+else
+  printmsg "Skipping SSH tests because ssh is not in the path"
+fi
+
+rm -rf ${TO}
+mkdir -p ${FROM}2/dir/subdir
+cp -a ${FROM}/dir/subdir/subsubdir ${FROM}2/dir/subdir
+cp ${FROM}/dir/* ${FROM}2/dir 2>/dev/null
+runtest "excludes" 'checkit "$RSYNC -vv -Hlrt --delete --include /dir/ --include /dir/\* --include /dir/\*/subsubdir  --include /dir/\*/subsubdir/\*\* --exclude \*\* ${FROM}/dir ${TO}" ${FROM}2/ ${TO}'
+rm -r ${FROM}2
+
+checkforlogs ${LOG}.?

testhelp/maketree.py

@@ -1,133 +0,0 @@
-#! /usr/bin/python2.2
-
-# Copyright (C) 2002 by Martin Pool <mbp@samba.org>
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version
-# 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# Lesser General Public License for more details.
-# 
-# You should have received a copy of the GNU Lesser General Public
-# License along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# Populate a tree with pseudo-randomly distributed files to test
-# rsync.
-
-from __future__ import generators
-import random, string, os, os.path
-
-nfiles = 10000
-depth = 5
-n_children = 20
-n_files = 20
-n_symlinks = 10
-
-name_chars = string.digits + string.letters
-
-abuffer = 'a' * 1024
-
-def random_name_chars():
-    a = ""
-    for i in range(10):
-        a = a + random.choice(name_chars)
-    return a
-
-    
-def generate_names():
-    n = 0
-    while 1:
-        yield "%05d_%s" % (n, random_name_chars())
-        n += 1
-
-
-class TreeBuilder:
-    def __init__(self):
-        self.n_children = 20
-        self.n_files = 100
-        self.total_entries = 100000 # long(1e8)
-        self.actual_size = 0
-        self.name_gen = generate_names()
-        self.all_files = []
-        self.all_dirs = []
-        self.all_symlinks = []
-
-
-    def random_size(self):
-        return random.lognormvariate(4, 4)
-
-
-    def random_symlink_target(self):
-        what = random.choice(['directory', 'file', 'symlink', 'none'])
-        try:
-            if what == 'directory':
-                return random.choice(self.all_dirs)
-            elif what == 'file':
-                return random.choice(self.all_files)
-            elif what == 'symlink':
-                return random.choice(self.all_symlinks)
-            elif what == 'none':
-                return self.name_gen.next()
-        except IndexError:
-            return self.name_gen.next()
-
-
-    def can_continue(self):
-        self.total_entries -= 1
-        return self.total_entries > 0
-
-        
-    def build_tree(self, prefix, depth):
-        """Generate a breadth-first tree"""
-        for count, function in [[n_files, self.make_file],
-                                [n_children, self.make_child_recurse],
-                                [n_symlinks, self.make_symlink]]:
-            for i in range(count):
-                if not self.can_continue():
-                    return
-                name = os.path.join(prefix, self.name_gen.next())
-                function(name, depth)
-
-
-    def print_summary(self):
-        print "total bytes: %d" % self.actual_size
-
-
-    def make_child_recurse(self, dname, depth):
-        if depth > 1:
-            self.make_dir(dname)
-            self.build_tree(dname, depth-1)
-
-
-    def make_dir(self, dname, depth='ignore'):
-        print "%s/" % (dname)
-        os.mkdir(dname)
-        self.all_dirs.append(dname)
-
-
-    def make_symlink(self, lname, depth='ignore'):
-        print "%s -> %s" % (lname, self.random_symlink_target())
-
-
-    def make_file(self, fname, depth='ignore'):
-        size = long(self.random_size())
-        print "%-70s %d" % (fname, size)
-        f = open(fname, 'w')
-        f.truncate(size)
-        self.fill_file(f, size)
-        self.all_files.append(fname)
-        self.actual_size += size
-
-    def fill_file(self, f, size):
-        while size > 0:
-            f.write(abuffer[:size])
-            size -= len(abuffer)
-
-    
-tb = TreeBuilder()
-tb.build_tree('/tmp/foo', 3)
-tb.print_summary()