Add FAN-53T decoder conf (#1588)

conf/FAN-53T.conf

@@ -0,0 +1,54 @@
+# Decoder for FAN-53T ceiling fan/light remote control
+# Very similar to FAN-11T.
+#
+# https://fccid.io/2AAZPFAN-53T/User-Manual/User-manual-2228959
+#
+# Code Format: 01 <Dipswitch Code> 0 <6-bit button map>  (all bits inverted)
+# Button Map Bits: [fan1, fan2, fan3, (some remotes send this when the button is released), fan0, light]
+# 
+# Dip switches are used as a unique ID to talk to a specific unit
+#
+# Some remotes have buttons labeled 0,1,2,3
+# Others are labeled Off, Hi, Med, Low
+#
+# Fan 0 = "Off"
+# Fan 1 = "High"
+# Fan 2 = "Medium"
+# Fan 3 = "Low"
+# 
+# Dipswitch: 0000
+# Fan 1 - 01 0000 0 100000
+# Fan 2 - 01 0000 0 010000
+# Fan 3 - 01 0000 0 001000
+# Fan 0 - 01 0000 0 000010
+# Light - 01 0000 0 000001
+# 
+# Dipswitch: 0001
+# Fan 1 - 01 0001 0 100000
+# Fan 2 - 01 0001 0 010000
+# Fan 3 - 01 0001 0 001000
+# Fan 0 - 01 0001 0 000010
+# Light - 01 0001 0 000001
+# 
+# Dipswitch: 1000
+# Fan 1 - 01 1000 0 100000
+# Fan 2 - 01 1000 0 010000
+# Fan 3 - 01 1000 0 001000
+# Fan 0 - 01 1000 0 000010
+# Light - 01 1000 0 000001
+ 
+
+frequency 303.900M
+
+decoder {
+    name        = FAN-53T,
+    modulation  = OOK_PWM,
+    short       = 360,
+    long        = 700,
+    gap         = 0,
+    reset       = 2000,
+    invert,
+    bits        = 13,
+    get         = id:@2:{4},
+    get         = button:@7:{6}:[32:fan_Hi 16:fan_Med 8:fan_Low 4:button_Released 2:fan_Off 1:light 0:  ],
+}