rtl_433

rtl_433 turns your Realtek RTL2832 based DVB dongle into a 433.92MHz generic data receiver

Installation instructions:

Compiling rtl_433 requires rtl-sdr to be installed.

Installation using cmake:

cd rtl_433/
mkdir build
cd build
cmake ../
make
make install

Installation using autoconf:

cd rtl_433/
autoreconf --install
./configure
make
make install

Running:

rtl_433 -h

Usage: [-d device index (default: 0)]
       [-g gain (default: 0 for auto)]
       [-a analyze mode, print a textual description of the signal]
       [-t signal auto save, use it together with analyze mode (-a -t)
       [-l change the detection level used to determine pulses (0-3200) default: 10000]
       [-f [-f...] receive frequency[s], default: 433920000 Hz]
       [-s sample rate (default: 250000 Hz)]
       [-S force sync output (default: async)]
       [-r read data from file instead of from a receiver]
       [-p ppm_error (default: 0)]
       [-r test file name (indata)]
       [-m test file mode (0 rtl_sdr data, 1 rtl_433 data)]
       [-D print debug info on event]
       [-z override short value]
       [-x override long value]
       [-R listen only for the specified remote device (can be used multiple times)]
       filename (a '-' dumps samples to stdout)
       
 Supported devices:
       [01] Silvercrest Remote Control
       [02] Rubicson Temperature Sensor
       [03] Prologue Temperature Sensor
       [04] Waveman Switch Transmitter
       [05] Steffen Switch Transmitter
       [06] ELV EM 1000
       [07] ELV WS 2000
       [08] LaCrosse TX Temperature / Humidity Sensor
       [09] Acurite 5n1 Weather Station
       [10] Acurite 896 Rain Gauge
       [11] Acurite Temperature and Humidity Sensor
       [12] Oregon Scientific Weather Sensor
       [13] Mebus 433
       [14] Intertechno 433
       [15] KlikAanKlikUit Wireless Switch
       [16] AlectoV1 Weather Sensor
       [17] Cardin S466-TX2
       [18] Fine Offset Electronics, WH-2 Sensor
       [19] Nexus Temperature & Humidity Sensor
       [20] Ambient Weather Temperature Sensor

Examples:

Command	Description
rtl_433 -a	will run in analyze mode and you will get a text log of the received signal.
rtl_433 -a file_name	will save the demodulated signal in a file. The format of the file is 48kHz 16 bit samples.
rtl_433	will run the software in receive mode. Some sensor data can be receviced.

This software is mostly useable for developers right now.

Google Group

https://groups.google.com/forum/#!forum/rtl_433