Add last minor change to changelog

added systemd support to powersup.linux_shutdown, linux_hibernate, linux_standby

ABOUT.txt

@@ -1,5 +1,5 @@
 *******************************************
-*** This is SABnzbd 2.0.1               ***
+*** This is SABnzbd 2.2.0               ***
 *******************************************
 SABnzbd is an open-source cross-platform binary newsreader.
 It simplifies the process of downloading from Usenet dramatically,

INSTALL.txt

@@ -1,4 +1,4 @@
-                                SABnzbd 2.0.1
+                                SABnzbd 2.2.0
 
 -------------------------------------------------------------------------------
 0) LICENSE
@@ -64,15 +64,15 @@ Windows
 
 Essential modules
     cheetah-2.0.1+          use "pip install cheetah"
-    par2cmdline >= 0.4      http://parchive.sourceforge.net/
-                            Note: https://sabnzbd.org/wiki/configuration/2.0/switches#par2cmdline
-                            And: https://sabnzbd.org/wiki/installation/multicore-par2
+    par2cmdline >= 0.4      https://github.com/Parchive/par2cmdline/releases
+                            See also: https://sabnzbd.org/wiki/installation/multicore-par2
     unrar >= 5.00+          http://www.rarlab.com/rar_add.htm
 
 Optional modules
     unzip >= 6.00           http://www.info-zip.org/
     7zip >= 9.20            http://www.7zip.org/
-    sabyenc == 3.0.2        use "pip install sabyenc" - https://sabnzbd.org/sabyenc
+    sabyenc == 3.0.2        use "pip install sabyenc"
+                            More information: https://sabnzbd.org/sabyenc
     openssl >= 1.0.0        http://www.openssl.org/
                             v0.9.8 will work, but limits certificate validation
     cryptography >= 1.0     use "pip install cryptography"

ISSUES.txt

@@ -24,13 +24,13 @@
   For these the server blocking method is not very favourable.
   There is an INI-only option that will limit blocks to 1 minute.
       no_penalties = 1
-  See: https://sabnzbd.org/wiki/configuration/2.0/special
+  See: https://sabnzbd.org/wiki/configuration/2.1/special
 
 - Some third-party utilties try to probe SABnzbd API in such a way that you will
   often see warnings about unauthenticated access.
   If you are sure these probes are harmless, you can suppress the warnings by
   setting the option "api_warnings" to 0.
-  See: https://sabnzbd.org/wiki/configuration/2.0/special
+  See: https://sabnzbd.org/wiki/configuration/2.1/special
 
 - On OSX you may encounter downloaded files with foreign characters.
   The par2 repair may fail when the files were created on a Windows system.
@@ -41,7 +41,7 @@
   You will see this only when downloaded files contain accented characters.
   You need to fix it yourself by running the convmv utility (available for most Linux platforms).
   Possible the file system override setting 'fsys_type' might be solve things:
-  See: https://sabnzbd.org/wiki/configuration/2.0/special
+  See: https://sabnzbd.org/wiki/configuration/2.1/special
 
 - The "Watched Folder" sometimes fails to delete the NZB files it has
   processed. This happens when other software still accesses these files.
@@ -81,4 +81,4 @@
   - Squeeze Linux
   There is a "special" option that will allow you to select an alternative library.
       use_pickle = 1
-  See: https://sabnzbd.org/wiki/configuration/2.0/special
+  See: https://sabnzbd.org/wiki/configuration/2.1/special

PKG-INFO

@@ -1,7 +1,7 @@
 Metadata-Version: 1.0
 Name: SABnzbd
-Version: 2.0.1
-Summary: SABnzbd-2.0.1
+Version: 2.2.0Alpha1
+Summary: SABnzbd-2.2.0Alpha1
 Home-page: http://sabnzbd.org
 Author: The SABnzbd Team
 Author-email: team@sabnzbd.org

README.mkd

@@ -1,28 +1,27 @@
-Release Notes  -  SABnzbd 2.0.1
+Release Notes  -  SABnzbd 2.2.0 Alpha 1
 =========================================================
 
-## Changes since 2.0.0
-- No longer change ports if the configured port is not available during startup.
-- 'Proof' files also ignored when Ignore Samples is enabled.
-- Redundant SFV and RAR checks no longer performed if par2 verification failed.
-- More repair/unpack info is retained in the History information.
-- Windows: remove option to start SABnzbd from installer, it would start the
-  program as administrator.
+NOTE: Due to changes in this release, the queue will be converted when 2.2.0
+is started for the first time. Job order, settings and data will be preserved,
+but URL's that did finished fetching before the upgrade will be lost!
 
-## Bugfixes since 2.0.0
-- Some users experienced slower download speeds.
-- Revert changes to handling of missing articles introduced in 2.0.0 that
-  turned out to be slow for some users.
-- Missing first par2-file would cause repair to be skipped.
-- Better handling of 7zip unpacking.
-- Log X-Forwarded-For of API calls and logins.
-- Handle more URLGrabber exceptions.
-- Command-line parameters were not listed correctly.
-- Queue-finish-action picker in Glitter more stable.
-- Custom Pause interpreter in Glitter more reliable.
-- Pre-check would fail if download was on SMBv3 share.
-- Windows: NZB-icon association lost sometimes.
-- Windows: Unrar could fail on some archives containing very long paths.
+## Changes in 2.2.0
+- Reduced memory usage, especially with larger queues
+- Slight improvement in download performance by removing internal locks
+- Smoother animations in Firefox (disabled previously due to FF high-CPU usage)
+- If enabled, replace dots in filenames also when there are spaces already
+- Jobs outside server retention are processed faster
+- max_art_opt and replace_illegal moved from Switches to Specials
+
+## Bugfixes in 2.2.0
+- Shutdown/suspend did not work on some Linux systems
+- Deleting a job could result in write errors
+- Display warning if custom par2 parameters are wrong
+- macOS: Catch 'Protocol wrong type for socket' errors
+- Windows: Fix error in MultiPar-code when first par2-file was damaged
+
+## Translations
+- Added Hebrew translation by ION IL, many other languages updated.
 
 ## Upgrading from 0.7.x and older
 - Finish queue
@@ -30,7 +29,7 @@ Release Notes  -  SABnzbd 2.0.1
 - Install new version
 - Start SABnzbd
 
-## Upgrade notices
+## Upgrade notices (from pre-2.x.x)
 - Windows: When starting the Post-Processing script, the path to the job folder
   is no longer in short-path notation but includes the full path. To support
   long paths (>255), you might need to alter them to long-path notation (\\?\).
@@ -43,9 +42,6 @@ Release Notes  -  SABnzbd 2.0.1
 ## Known problems and solutions
 - Read the file "ISSUES.txt"
 
-## Translations
-- Numerous translations updated, thanks to our translators!
-
 ## About
   SABnzbd is an open-source cross-platform binary newsreader.
   It simplifies the process of downloading from Usenet dramatically, thanks

SABnzbd.py

@@ -56,8 +56,6 @@ if [int(n) for n in cherrypy.__version__.split('.')] < [8, 1, 2]:
     print 'Sorry, requires Python module Cherrypy 8.1.2+ (use the included version)'
     sys.exit(1)
 
-from cherrypy import _cpserver
-
 SQLITE_DLL = True
 try:
     from sqlite3 import version as sqlite3_version
@@ -90,7 +88,7 @@ from sabnzbd.misc import real_path, \
     check_latest_version, exit_sab, \
     split_host, get_ext, create_https_certificates, \
     windows_variant, ip_extract, set_serv_parms, get_serv_parms, globber_full
-from sabnzbd.panic import panic_tmpl, panic_port, panic_host, panic_fwall, \
+from sabnzbd.panic import panic_tmpl, panic_port, panic_host, \
     panic_sqlite, panic, launch_a_browser
 import sabnzbd.scheduler as scheduler
 import sabnzbd.config as config
@@ -433,6 +431,9 @@ def print_modules():
     if sabnzbd.newsunpack.PAR2C_COMMAND:
         logging.info("par2cmdline binary... found (%s)", sabnzbd.newsunpack.PAR2C_COMMAND)
 
+    if sabnzbd.newsunpack.MULTIPAR_COMMAND:
+        logging.info("MultiPar binary... found (%s)", sabnzbd.newsunpack.MULTIPAR_COMMAND)
+
     if sabnzbd.newsunpack.RAR_COMMAND:
         logging.info("UNRAR binary... found (%s)", sabnzbd.newsunpack.RAR_COMMAND)
 
@@ -724,24 +725,6 @@ def evaluate_inipath(path):
             return path
 
 
-def cherrypy_logging(log_path, log_handler):
-    """ Setup CherryPy logging """
-    log = cherrypy.log
-    log.access_file = ''
-    log.error_file = ''
-    # Max size of 512KB
-    maxBytes = getattr(log, "rot_maxBytes", 524288)
-    # cherrypy.log cherrypy.log.1 cherrypy.log.2
-    backupCount = getattr(log, "rot_backupCount", 3)
-
-    # Make a new RotatingFileHandler for the error log.
-    fname = getattr(log, "rot_error_file", log_path)
-    h = log_handler(fname, 'a', maxBytes, backupCount)
-    h.setLevel(logging.DEBUG)
-    h.setFormatter(cherrypy._cplogging.logfmt)
-    log.error_log.addHandler(h)
-
-
 def commandline_handler(frozen=True):
     """ Split win32-service commands are true parameters
         Returns:
@@ -1059,7 +1042,7 @@ def main():
                             sabnzbd.cfg.https_port.set(newport)
                         else:
                             # In case HTTPS == HTTP port
-                            http_port = newport
+                            cherryport = newport
                             sabnzbd.cfg.port.set(newport)
         except:
             # Something else wrong, probably badly specified host
@@ -1350,7 +1333,6 @@ def main():
                             'error_page.404': sabnzbd.panic.error_page_404
                             })
 
-
     # Do we want CherryPy Logging? Cannot be done via the config
     if cherrypylogging:
         sabnzbd.WEBLOGFILE = os.path.join(logdir, DEF_LOG_CHERRY)

cherrypy/wsgiserver/__init__.py

@@ -196,12 +196,13 @@ socket_errors_to_ignore = plat_specific_errors(
 )
 socket_errors_to_ignore.append('timed out')
 socket_errors_to_ignore.append('The read operation timed out')
-if sys.platform == 'darwin':
-    socket_errors_to_ignore.append(plat_specific_errors('EPROTOTYPE'))
-
 socket_errors_nonblocking = plat_specific_errors(
     'EAGAIN', 'EWOULDBLOCK', 'WSAEWOULDBLOCK')
 
+if sys.platform == 'darwin':
+    socket_errors_to_ignore.append(plat_specific_errors('EPROTOTYPE'))
+    socket_errors_nonblocking.append(plat_specific_errors('EPROTOTYPE'))
+
 comma_separated_headers = [
     ntob(h) for h in
     ['Accept', 'Accept-Charset', 'Accept-Encoding',

interfaces/Config/templates/config.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="Config"#-->
-<!--#set global $help_uri="configuration/2.0/configure"#-->
+<!--#set global $help_uri="configuration/2.1/configure"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 
 <!--#from locale import getpreferredencoding#-->
@@ -41,12 +41,16 @@
                     </td>
                 </tr>
                 <!--#end if#-->
-                <!--#if not $have_mt_par2#-->
+                <!--#if not $nt and not $darwin#-->
                 <tr>
-                    <th scope="row">Multicore Par2</th>
+                    <th scope="row">$T('opt-multicore-par2')</th>
                     <td>
+                        <!--#if $have_mt_par2#-->
+                        <span class="glyphicon glyphicon-ok"></span>
+                        <!--#else#-->
                         <span class="label label-warning">$T('notAvailable')</span> $T('explain-getpar2mt')
                         <a href="${helpuri}installation/multicore-par2" target="_blank">${helpuri}installation/multicore-par2</a>
+                        <!--#end if#-->
                     </td>
                 </tr>
                 <!--#end if#-->

interfaces/Config/templates/config_cat.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="Categories"#-->
-<!--#set global $help_uri="configuration/2.0/categories"#-->
+<!--#set global $help_uri="configuration/2.1/categories"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 <div class="colmask">
     <div class="section">

interfaces/Config/templates/config_folders.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="Folders"#-->
-<!--#set global $help_uri="configuration/2.0/folders"#-->
+<!--#set global $help_uri="configuration/2.1/folders"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 
 <div class="colmask">

interfaces/Config/templates/config_general.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="General"#-->
-<!--#set global $help_uri="configuration/2.0/general"#-->
+<!--#set global $help_uri="configuration/2.1/general"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 
 <div class="colmask">
@@ -240,7 +240,17 @@
             \$('.alert-translate').show()
         }
     }
-    \$('#language').on('change', hideOrShowTranslate)
+    \$('#language').on('change', function() {
+        // Show message
+        hideOrShowTranslate()
+        // Re-load page on submit
+        \$('.fullform').submit(function() {
+            // Skip the fancy stuff, just submit
+            this.submit()
+        })
+        // No JSON reponse
+        \$('#ajax').val('')
+    })
     hideOrShowTranslate()
 
     \$('#apikey, #nzbkey').click(function () { \$(this).select() });
@@ -314,14 +324,20 @@
     if(bandwidthLimit) {
         var bandwithLimitNumber = parseFloat(bandwidthLimit)
         var bandwithLimitText = bandwidthLimit.replace(/[^a-zA-Z]+/g, '');
-        \$('#bandwidth_max_value').val(bandwithLimitNumber)
-        \$('#bandwidth_max_dropdown').val(bandwithLimitText)
+        if(bandwithLimitNumber) {
+            \$('#bandwidth_max_value').val(bandwithLimitNumber)
+            \$('#bandwidth_max_dropdown').val(bandwithLimitText)
+        }
     }
 
 
     // Update the value
     \$('#bandwidth_max_value, #bandwidth_max_dropdown').on('change', function() {
-        \$('#bandwidth_max').val(\$('#bandwidth_max_value').val() + \$('#bandwidth_max_dropdown').val())
+        if(\$('#bandwidth_max_value').val()) {
+            \$('#bandwidth_max').val(\$('#bandwidth_max_value').val() + \$('#bandwidth_max_dropdown').val())
+        } else {
+            \$('#bandwidth_max').val('')
+        }
     })
 
 });

interfaces/Config/templates/config_notify.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="Email"#-->
-<!--#set global $help_uri="configuration/2.0/notifications"#-->
+<!--#set global $help_uri="configuration/2.1/notifications"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 
 <!--#def show_notify_checkboxes($section_label)#-->

interfaces/Config/templates/config_rss.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="RSS"#-->
-<!--#set global $help_uri="configuration/2.0/rss"#-->
+<!--#set global $help_uri="configuration/2.1/rss"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 <div class="colmask">
     <!--#if not $active_feed#-->

interfaces/Config/templates/config_scheduling.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="Scheduling"#-->
-<!--#set global $help_uri="configuration/2.0/scheduling"#-->
+<!--#set global $help_uri="configuration/2.1/scheduling"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 
 <%

interfaces/Config/templates/config_server.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="Servers"#-->
-<!--#set global $help_uri="configuration/2.0/servers"#-->
+<!--#set global $help_uri="configuration/2.1/servers"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 
 <div class="colmask">
@@ -338,6 +338,7 @@
         }).then(function(data) {
             // Let's replace the link
             msg = data.value.message.replace('https://sabnzbd.org/certificate-errors', '<a href="https://sabnzbd.org/certificate-errors" class="alert-link" target="_blank">https://sabnzbd.org/certificate-errors</a>')
+            msg = msg.replace('-', '<br>')
             // Fill the box and enable the button
             resultBox.removeClass('alert-success alert-danger').show()
             resultBox.html(msg)

interfaces/Config/templates/config_sorting.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="Sorting"#-->
-<!--#set global $help_uri="configuration/2.0/sorting"#-->
+<!--#set global $help_uri="configuration/2.1/sorting"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 
 <div class="colmask">

interfaces/Config/templates/config_special.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="Special"#-->
-<!--#set global $help_uri="configuration/2.0/special"#-->
+<!--#set global $help_uri="configuration/2.1/special"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 
 <div class="colmask">

interfaces/Config/templates/config_switches.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="Switches"#-->
-<!--#set global $help_uri="configuration/2.0/switches"#-->
+<!--#set global $help_uri="configuration/2.1/switches"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 
 <div class="colmask">
@@ -31,12 +31,6 @@
                         <input type="number" name="max_art_tries" id="max_art_tries" value="$max_art_tries" min="2" max="2000" />
                         <span class="desc">$T('explain-max_art_tries')</span>
                     </div>
-                    <div class="field-pair">
-                        <label class="config" for="max_art_opt">$T('opt-max_art_opt')</label>
-                        <input type="checkbox" name="max_art_opt" id="max_art_opt" value="1" <!--#if int($max_art_opt) > 0 then 'checked="checked"' else ""#--> />
-                        <span class="desc">$T('explain-max_art_opt')</span>
-                    </div>
-
                     <div class="field-pair">
                         <label class="config" for="auto_disconnect">$T('opt-auto_disconnect')</label>
                         <input type="checkbox" name="auto_disconnect" id="auto_disconnect" value="1" <!--#if int($auto_disconnect) > 0 then 'checked="checked"' else ""#--> />
@@ -159,11 +153,11 @@
                         <input type="checkbox" name="enable_all_par" id="enable_all_par" value="1" <!--#if int($enable_all_par) > 0 then 'checked="checked"' else ""#--> />
                         <span class="desc">$T('explain-enable_all_par').replace('. ', '.<br/>')</span>
                     </div>
-                    <!--#if $have_multicore#-->
+                    <!--#if $nt#-->
                     <div class="field-pair">
-                        <label class="config" for="par2_multicore">$T('opt-par2_multicore')</label>
-                        <input type="checkbox" name="par2_multicore" id="par2_multicore" value="1" <!--#if int($par2_multicore) > 0 then 'checked="checked"' else ""#-->  />
-                        <span class="desc">$T('explain-par2_multicore')</span>
+                        <label class="config" for="multipar">$T('opt-par2_multipar')</label>
+                        <input type="checkbox" name="multipar" id="multipar" value="1" <!--#if int($multipar) > 0 then 'checked="checked"' else ""#--> />
+                        <span class="desc">$T('explain-par2_multipar')</span>
                     </div>
                     <!--#end if#-->
                     <div class="field-pair">
@@ -251,11 +245,6 @@
                         <input type="checkbox" name="replace_dots" id="replace_dots" value="1" <!--#if int($replace_dots) > 0 then 'checked="checked"' else ""#--> />
                         <span class="desc">$T('explain-replace_dots')</span>
                     </div>
-                    <div class="field-pair">
-                        <label class="config" for="replace_illegal">$T('opt-replace_illegal')</label>
-                        <input type="checkbox" name="replace_illegal" id="replace_illegal" value="1" <!--#if int($replace_illegal) > 0 then 'checked="checked"' else ""#--> />
-                        <span class="desc">$T('explain-replace_illegal')</span>
-                    </div>
                     <!--#if not $nt#-->
                     <div class="field-pair">
                         <label class="config" for="sanitize_safe">$T('opt-sanitize_safe')</label>

interfaces/Config/templates/staticcfg/js/script.js

@@ -263,7 +263,7 @@ function do_restart() {
             // Keep counter of failures
             var failureCounter = 0;
 
-            // Now we try untill we can connect
+            // Now we try until we can connect
             var refreshInterval = setInterval(function() {
                 // We skip the first one
                 if(failureCounter == 0) {
@@ -401,7 +401,7 @@ $(document).ready(function () {
     $(checkDisabled).on('change', function() {
         $(this).parent().nextAll().toggleClass('disabled')
     })
-    if(!$(checkDisabled).is(':checked')) {
+    if($(checkDisabled).is(':checked')) {
         $(checkDisabled).parent().nextAll().addClass('disabled')
     }
 
@@ -409,6 +409,9 @@ $(document).ready(function () {
     $('#enable_https').on('change', function() {
         $('.enable_https_options').toggle()
     })
+    if(!$('#enable_https').is(':checked')) {
+        $('.enable_https_options').hide()
+    }
 
     $('.advancedButton').click(function(event){
         $('.advanced-settings').toggle()

interfaces/Glitter/templates/static/javascripts/glitter.history.js

@@ -297,11 +297,11 @@ function HistoryModel(parent, data) {
     self.processingDownload = ko.pureComputed(function() {
         var status = self.status();
         // When we can cancel
-        if (status === 'Extracting' || status === 'Verifying' || status == 'Repairing') {
+        if (status === 'Extracting' || status === 'Verifying' || status == 'Repairing' || status === 'Running') {
             return 2
         }
         // These cannot be cancelled
-        if(status === 'Moving' ||  status === 'Running') {
+        if(status === 'Moving') {
             return 1
         }
         return false;

interfaces/Glitter/templates/static/javascripts/glitter.main.js

@@ -12,7 +12,7 @@ function ViewModel() {
     self.isRestarting = ko.observable(false);
     self.useGlobalOptions = ko.observable(true).extend({ persist: 'useGlobalOptions' });
     self.refreshRate = ko.observable(1).extend({ persist: 'pageRefreshRate' });
-    self.dateFormat = ko.observable('DD/MM/YYYY HH:mm').extend({ persist: 'pageDateFormat' });
+    self.dateFormat = ko.observable('fromNow').extend({ persist: 'pageDateFormat' });
     self.displayTabbed = ko.observable().extend({ persist: 'displayTabbed' });
     self.displayCompact = ko.observable(false).extend({ persist: 'displayCompact' });
     self.confirmDeleteQueue = ko.observable(true).extend({ persist: 'confirmDeleteQueue' });
@@ -173,8 +173,8 @@ function ViewModel() {
         }
 
         // Did we exceed the space?
-        self.diskSpaceExceeded1(parseInt(response.queue.mbleft)/1024 > parseInt(response.queue.diskspace1))
-        self.diskSpaceExceeded2(parseInt(response.queue.mbleft)/1024 > parseInt(response.queue.diskspace2))
+        self.diskSpaceExceeded1(parseInt(response.queue.mbleft)/1024 > parseFloat(response.queue.diskspace1))
+        self.diskSpaceExceeded2(parseInt(response.queue.mbleft)/1024 > parseFloat(response.queue.diskspace2))
 
         // Quota
         self.quotaLimit(response.queue.quota)

interfaces/Glitter/templates/static/stylesheets/glitter.css

@@ -1921,49 +1921,6 @@ input[name="nzbURL"] {
     }
 }
 
-/***
-    SPECIAL FOR FIREFOX
-    It uses very high CPU for anything animated (Sep 2015)
-    Disable animations on progress-bar and make the History-'processing' a block animation
-    Can be removed if it's performance gets better in the future..
-***/
-@supports (-moz-transform: translate(0, 0)) {
-    .progress-bar {
-        transform: none !important;
-        animation: none !important;
-        transition: none !important;
-    }
-
-    @keyframes stretchdelay {
-        0%, 60% {
-            transform: scaleY(0.4);
-        }
-
-        61%, 100% {
-            transform: scaleY(1.0);
-        }
-    }
-
-    .processing-download > div {
-        animation: stretchdelay 2s infinite linear;
-    }
-
-    .processing-download .loader-bar-two {
-        animation-delay: 0.2s;
-    }
-
-    .processing-download .loader-bar-three {
-        animation-delay: 0.4s;
-    }
-
-    .processing-download .loader-bar-four {
-        animation-delay: 0.6s;
-    }
-
-    .queue-table td.name input {
-        margin-left: -2px;
-    }
-}
 
 /***
     Bootstrap overwrites

po/main/en.po

@@ -124,4 +124,12 @@ msgstr "Notification script returned exit code %s and output \"%s\""
 msgid "If empty, the standard port will only listen to HTTPS."
 msgstr "If empty, the SABnzbd Port set above will listen to HTTPS."
 
+#: sabnzbd/skintext.py:466
+msgid "Posts will be paused untill they are at least this age. Setting job priority to Force will skip the delay."
+msgstr "Posts will be paused until they are at least this age. Setting job priority to Force will skip the delay."
+
+#: sabnzbd/skintext.py:841
+msgid "How long or until when do you want to pause? (in English!)"
+msgstr ""
+
 

po/nsis/de.po

@@ -8,14 +8,14 @@ msgstr ""
 "Project-Id-Version: sabnzbd\n"
 "Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
 "POT-Creation-Date: 2017-03-18 21:42+0000\n"
-"PO-Revision-Date: 2013-05-05 14:50+0000\n"
-"Last-Translator: shypike <Unknown>\n"
+"PO-Revision-Date: 2017-05-22 08:00+0000\n"
+"Last-Translator: larshuth <Unknown>\n"
 "Language-Team: German <de@li.org>\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
-"X-Launchpad-Export-Date: 2017-03-19 06:37+0000\n"
-"X-Generator: Launchpad (build 18332)\n"
+"X-Launchpad-Export-Date: 2017-05-23 06:10+0000\n"
+"X-Generator: Launchpad (build 18387)\n"
 
 #: NSIS_Installer.nsi:473
 msgid "Show Release Notes"
@@ -23,7 +23,7 @@ msgstr "Versionshinweise anzeigen"
 
 #: NSIS_Installer.nsi:475
 msgid "Start SABnzbd"
-msgstr ""
+msgstr "Starte SABnzbd"
 
 #: NSIS_Installer.nsi:477
 msgid "Support the project, Donate!"
@@ -38,6 +38,9 @@ msgid ""
 "The installation directory has changed (now in \"Program Files\"). \\nIf you "
 "run SABnzbd as a service, you need to update the service settings."
 msgstr ""
+"Das Installationsverzeichnis hat sich geändert (nun in \"Program Files\"). \\"
+"nWenn du SABnzbd als Service ausführst, musst du die Serviceeinstellungen "
+"anpassen."
 
 #: NSIS_Installer.nsi:483
 msgid "This will uninstall SABnzbd from your system"

po/nsis/he.po

@@ -0,0 +1,98 @@
+# Hebrew translation for sabnzbd
+# Copyright (c) 2017 Rosetta Contributors and Canonical Ltd 2017
+# This file is distributed under the same license as the sabnzbd package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, 2017.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: sabnzbd\n"
+"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
+"POT-Creation-Date: 2017-03-18 21:42+0000\n"
+"PO-Revision-Date: 2017-05-06 09:07+0000\n"
+"Last-Translator: ION IL <Unknown>\n"
+"Language-Team: Hebrew <he@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Launchpad-Export-Date: 2017-05-07 05:39+0000\n"
+"X-Generator: Launchpad (build 18366)\n"
+
+#: NSIS_Installer.nsi:473
+msgid "Show Release Notes"
+msgstr "הראה הערות שחרור"
+
+#: NSIS_Installer.nsi:475
+msgid "Start SABnzbd"
+msgstr "התחל את SABnzbd"
+
+#: NSIS_Installer.nsi:477
+msgid "Support the project, Donate!"
+msgstr "תמוך במיזם, תרום!"
+
+#: NSIS_Installer.nsi:479
+msgid "Please close \"SABnzbd.exe\" first"
+msgstr "אנא סגור את \"SABnzbd.exe\" תחילה"
+
+#: NSIS_Installer.nsi:481
+msgid ""
+"The installation directory has changed (now in \"Program Files\"). \\nIf you "
+"run SABnzbd as a service, you need to update the service settings."
+msgstr ""
+"ספרית ההתקנה השתנתה (עכשיו ב-\"Program Files\"). \\nאם תריץ את SABnzbd בתור "
+"שירות, אתה צריך לעדכן את הגדרות השירות."
+
+#: NSIS_Installer.nsi:483
+msgid "This will uninstall SABnzbd from your system"
+msgstr "זה יסיר את SABnzbd ממערכתך"
+
+#: NSIS_Installer.nsi:485
+msgid "Run at startup"
+msgstr "הפעל באתחול"
+
+#: NSIS_Installer.nsi:487
+msgid "Desktop Icon"
+msgstr "צלמית שולחן עבודה"
+
+#: NSIS_Installer.nsi:489
+msgid "NZB File association"
+msgstr "שיוך קבצי NZB"
+
+#: NSIS_Installer.nsi:491
+msgid "Delete Program"
+msgstr "מחק תכנית"
+
+#: NSIS_Installer.nsi:493
+msgid "Delete Settings"
+msgstr "מחק הגדרות"
+
+#: NSIS_Installer.nsi:495
+msgid ""
+"This system requires the Microsoft runtime library VC90 to be installed "
+"first. Do you want to do that now?"
+msgstr ""
+"מערכת זו דורשת את ספרית זמן-אמת VC90 של Microsoft שתהיה מותקנת תחילה. האם "
+"ברצונך להתקין אותה כעת?"
+
+#: NSIS_Installer.nsi:497
+msgid "Downloading Microsoft runtime installer..."
+msgstr "מוריד מתקין זמן-אמת של Microsoft..."
+
+#: NSIS_Installer.nsi:499
+msgid "Download error, retry?"
+msgstr "שגיאת הורדה, לנסות שוב?"
+
+#: NSIS_Installer.nsi:501
+msgid "Cannot install without runtime library, retry?"
+msgstr "לא ניתן להתקין ללא ספרית זמן-אמת, לנסות שוב?"
+
+#: NSIS_Installer.nsi:503
+msgid ""
+"You cannot overwrite an existing installation. \\n\\nClick `OK` to remove "
+"the previous version or `Cancel` to cancel this upgrade."
+msgstr ""
+"אינך יכול לדרוס התקנה קיימת.\\n\\nלחץ על `אישור` כדי להסיר את הגרסה הקודמת "
+"או על `ביטול` כדי לבטל שדרוג זה."
+
+#: NSIS_Installer.nsi:505
+msgid "Your settings and data will be preserved."
+msgstr "ההגדרות והנתונים שלך יישמרו."