Set version to 3.5.2

This reverts commit 3c3aeac93c.

It turns out this causes problems!

.github/dependabot.yml

@@ -0,0 +1,14 @@
+version: 2
+updates:
+- package-ecosystem: "pip"
+  directory: "/"
+  schedule:
+    interval: "weekly"
+- package-ecosystem: "pip"
+  directory: "/builder"
+  schedule:
+    interval: "weekly"
+- package-ecosystem: "pip"
+  directory: "/builder/osx"
+  schedule:
+    interval: "weekly"

.github/workflows/black.yml

@@ -17,6 +17,6 @@ jobs:
             builder
             tests
             --line-length=120
-            --target-version=py36
+            --target-version=py37
             --check
             --diff

.github/workflows/build_release.yml

@@ -2,19 +2,21 @@ name: Build binaries and source distribution
 
 on: [push, pull_request]
 
+env:
+  AUTOMATION_GITHUB_TOKEN: ${{ secrets.AUTOMATION_GITHUB_TOKEN }}
+
 jobs:
   build_windows:
     name: Build Windows binary
     runs-on: windows-latest
-    env:
-      AUTOMATION_GITHUB_TOKEN: ${{ secrets.AUTOMATION_GITHUB_TOKEN }}
+    timeout-minutes: 15
     steps:
     - uses: actions/checkout@v2
-    - name: Set up Python 3.9 (64bit)
+    - name: Set up Python 3.10 (64bit)
       uses: actions/setup-python@v2
       with:
-        python-version: 3.9
-        architecture: x64
+        python-version: "3.10"
+        architecture: "x64"
     - name: Install Python dependencies (64bit)
       run: |
         python --version
@@ -43,8 +45,8 @@ jobs:
     - name: Set up Python 3.8 (32bit and legacy)
       uses: actions/setup-python@v2
       with:
-        python-version: 3.8
-        architecture: x86
+        python-version: "3.8"
+        architecture: "x86"
     - name: Install Python dependencies (32bit and legacy)
       run: |
         python --version
@@ -64,17 +66,19 @@ jobs:
 
   build_macos:
     name: Build macOS binary
-    runs-on: macos-latest
+    runs-on: macos-11
+    timeout-minutes: 15
     env:
       SIGNING_AUTH: ${{ secrets.SIGNING_AUTH }}
       NOTARIZATION_USER: ${{ secrets.NOTARIZATION_USER }}
       NOTARIZATION_PASS: ${{ secrets.NOTARIZATION_PASS }}
-      AUTOMATION_GITHUB_TOKEN: ${{ secrets.AUTOMATION_GITHUB_TOKEN }}
       # We need the official Python, because the GA ones only support newer macOS versions
       # The deployment target is picked up by the Python build tools automatically
       # If updated, make sure to also set LSMinimumSystemVersion in SABnzbd.spec
-      PYTHON_VERSION: 3.9.5
-      MACOSX_DEPLOYMENT_TARGET: 10.9
+      PYTHON_VERSION: "3.10.2"
+      MACOSX_DEPLOYMENT_TARGET: "10.9"
+      # We need to force compile for universal2 support
+      CFLAGS: -arch arm64 -arch x86_64
     steps:
     - uses: actions/checkout@v2
     - name: Cache Python download
@@ -85,15 +89,31 @@ jobs:
         key: macOS-Python-${{ env.PYTHON_VERSION }}
     - name: Get Python
       if: steps.cache-python-download.outputs.cache-hit != 'true'
-      run: curl https://www.python.org/ftp/python/${PYTHON_VERSION}/python-${PYTHON_VERSION}-macosx10.9.pkg -o ~/python.pkg
+      run: curl https://www.python.org/ftp/python/${PYTHON_VERSION}/python-${PYTHON_VERSION}-macos11.pkg -o ~/python.pkg
     - name: Install Python
       run: sudo installer -pkg ~/python.pkg -target /
     - name: Install Python dependencies
+      # We have to manually install a few packages:
+      # 1.  cffi will pick up the single-arch libffi from Homebrew, while Apple provides universal2-version
+      #     of libffi with XCode. So we forcefully have to remove the Homebrew one.
+      # 2.  Because building cryptography is hard, and we cannot force pip to fetch universal2 version we
+      #     first install the x86 version (and it's dependencies) and then manually fetch the universal2 build
+      #     https://github.com/pyca/cryptography/issues/5918
+      # 3.  We need to build the PyInstaller bootloader from sources:
+      #     https://github.com/pyinstaller/pyinstaller/issues/6235
       run: |
         python3 --version
         pip3 install --upgrade pip wheel
-        pip3 install --upgrade -r requirements.txt
-        pip3 install --upgrade -r builder/requirements.txt
+        
+        brew uninstall libffi --ignore-dependencies
+        ARCHFLAGS="-arch x86_64 -arch arm64" pip3 install --upgrade cffi --no-binary cffi
+        pip3 install --upgrade -r requirements.txt --no-binary sabyenc3
+        
+        pip3 uninstall cryptography -y
+        pip3 download -r builder/osx/requirements.txt --platform macosx_10_10_universal2 --only-binary :all: --no-deps --dest .
+        pip3 install -r builder/osx/requirements.txt --no-cache-dir --no-index --find-links .
+        
+        PYINSTALLER_COMPILE_BOOTLOADER=1 pip3 install --upgrade -r builder/requirements.txt --no-binary pyinstaller
     - name: Import macOS codesign certificates
       uses: apple-actions/import-codesign-certs@v1
       if: env.SIGNING_AUTH
@@ -111,4 +131,22 @@ jobs:
         name: macOS binary (not notarized)
     - name: Prepare official release
       if: env.AUTOMATION_GITHUB_TOKEN && startsWith(github.ref, 'refs/tags/')
-      run: python3 builder/package.py release
+      run: python3 builder/package.py release
+
+  release_snap:
+    name: Release Snap
+    runs-on: ubuntu-latest
+    if: github.event_name == 'push' && contains(github.ref, 'refs/tags/')
+    env:
+      SNAP_TOKEN: ${{ secrets.SNAP_TOKEN }}
+    steps:
+      - uses: actions/checkout@v2
+      - name: Set up Python
+        uses: actions/setup-python@v2
+        with:
+          python-version: "3.x"
+      - name: Release latest available Snap
+        run: |
+          sudo snap install snapcraft --classic
+          echo "${SNAP_TOKEN}" | snapcraft login --with -
+          python3 snap/local/release_snap.py

.github/workflows/integration_testing.yml

@@ -6,17 +6,20 @@ jobs:
   test:
     name: Test ${{ matrix.name }} - Python ${{ matrix.python-version }}
     runs-on: ${{ matrix.os }}
+    timeout-minutes: 15
     strategy:
+      fail-fast: false
       matrix:
-        python-version: [3.6, 3.7, 3.8, 3.9]
+        python-version: ["3.7", "3.8", "3.9", "3.10"]
         os: [ubuntu-20.04]
         include:
+          # TODO: Update to 3.10 when all packages are available, currently lxml is missing
           - name: macOS
             os: macos-latest
-            python-version: 3.9
+            python-version: "3.10"
           - name: Windows
             os: windows-latest
-            python-version: 3.9
+            python-version: "3.10"
 
     steps:
     - uses: actions/checkout@v2
@@ -26,11 +29,11 @@ jobs:
         python-version: ${{ matrix.python-version }}
     - name: Install system dependencies
       if: runner.os == 'Linux'
-      run: sudo apt-get install unrar p7zip-full par2 chromium-chromedriver
+      run: sudo apt-get install unrar p7zip-full par2
     - name: Install Python dependencies
       run: |
         python --version
-        pip install --upgrade pip
+        pip install --upgrade pip wheel
         pip install --upgrade -r requirements.txt
         pip install --upgrade -r tests/requirements.txt
     - name: Test SABnzbd

.github/workflows/translations.yml

@@ -8,27 +8,30 @@ on:
 jobs:
   translations:
     runs-on: ubuntu-latest
+    env:
+      TX_TOKEN: ${{ secrets.TX_TOKEN }}
     steps:
       - uses: actions/checkout@v2
       - name: Generate translatable texts
         run: |
           python3 tools/extract_pot.py
       - name: Install Transifex client
+        if: env.TX_TOKEN
         # Sudo is needed to link the "tx"-command
         run: |
           sudo -H python3 -m pip install setuptools wheel
           sudo -H python3 -m pip install transifex-client
       - name: Push/pull Transifex translations
+        if: env.TX_TOKEN
         run: |
           tx push --source --parallel
           tx pull --all --force --parallel
-        env:
-          TX_TOKEN: ${{ secrets.TX_TOKEN }}
       - name: Compile translations to validate them
         run: |
           python3 tools/make_mo.py
       - name: Push translatable and translated texts back to repo
         uses: stefanzweifel/git-auto-commit-action@v4.5.1
+        if: env.TX_TOKEN
         with:
           commit_message: Update translatable texts
           commit_user_name: SABnzbd Automation

.tx/config

@@ -21,4 +21,3 @@ minimum_perc = 0
 source_file = po/nsis/SABnsis.pot
 source_lang = en
 type = PO
-

COPYRIGHT.txt

@@ -1,5 +1,5 @@
 
-(c) Copyright 2007-2021 by "The SABnzbd-team" <team@sabnzbd.org>
+(c) Copyright 2007-2022 by "The SABnzbd-team" <team@sabnzbd.org>
 
 The SABnzbd-team is:
 

INSTALL.txt

@@ -1,10 +1,10 @@
-                            SABnzbd 3.3.0
+                                    SABnzbd
 
 -------------------------------------------------------------------------------
 0) LICENSE
 -------------------------------------------------------------------------------
 
-(c) Copyright 2007-2021 by "The SABnzbd-team" <team@sabnzbd.org>
+(c) Copyright 2007-2022 by "The SABnzbd-team" <team@sabnzbd.org>
 
 This program is free software; you can redistribute it and/or
 modify it under the terms of the GNU General Public License
@@ -41,7 +41,7 @@ Use the "Help" button in the web-interface to be directed to the Help Wiki.
 -------------------------------------------------------------------------------
 3) INSTALL pre-built macOS binaries
 -------------------------------------------------------------------------------
-Download the DMG file, mount and drag the SABnzbd icon to Programs.
+Download the DMG file, mount and drag the SABnzbd icon to Applications.
 Just like you do with so many apps.
 
 -------------------------------------------------------------------------------
@@ -52,7 +52,7 @@ Specific guides to install from source are available for Windows and macOS:
     https://sabnzbd.org/wiki/installation/install-macos
     https://sabnzbd.org/wiki/installation/install-from-source-windows
 
-Only Python 3.6 and above is supported.
+Only Python 3.7 and above is supported.
 
 On Linux systems you need to install:
     par2 unrar unzip python3-setuptools python3-pip

ISSUES.txt

@@ -14,13 +14,13 @@
   For these the server blocking method is not very favourable.
   There is an INI-only option that will limit blocks to 1 minute.
       no_penalties = 1
-  See: https://sabnzbd.org/wiki/configuration/3.3/special
+  See: https://sabnzbd.org/wiki/configuration/3.4/special
 
 - Some third-party utilties try to probe SABnzbd API in such a way that you will
   often see warnings about unauthenticated access.
   If you are sure these probes are harmless, you can suppress the warnings by
   setting the option "api_warnings" to 0.
-  See: https://sabnzbd.org/wiki/configuration/3.3/special
+  See: https://sabnzbd.org/wiki/configuration/3.4/special
 
 - On macOS you may encounter downloaded files with foreign characters.
   The par2 repair may fail when the files were created on a Windows system.

LICENSE.txt

@@ -1,4 +1,4 @@
-(c) Copyright 2007-2021 by "The SABnzbd-team" <team@sabnzbd.org>
+(c) Copyright 2007-2022 by "The SABnzbd-team" <team@sabnzbd.org>
 
 This program is free software; you can redistribute it and/or
 modify it under the terms of the GNU General Public License

PKG-INFO

@@ -1,7 +1,7 @@
 Metadata-Version: 1.0
 Name: SABnzbd
-Version: 3.3.0
-Summary: SABnzbd-3.3.0
+Version: 3.5.2
+Summary: SABnzbd-3.5.2
 Home-page: https://sabnzbd.org
 Author: The SABnzbd Team
 Author-email: team@sabnzbd.org

README.md

@@ -18,8 +18,8 @@ If you want to know more you can head over to our website: https://sabnzbd.org.
 
 SABnzbd has a few dependencies you'll need before you can get running. If you've previously run SABnzbd from one of the various Linux packages, then you likely already have all the needed dependencies. If not, here's what you're looking for:
 
-- `python` (Python 3.6 and higher, often called `python3`)
-- Python modules listed in `requirements.txt`
+- `python` (Python 3.7 and above, often called `python3`)
+- Python modules listed in `requirements.txt`. Install with `python3 -m pip install -r requirements.txt -U`
 - `par2` (Multi-threaded par2 installation guide can be found [here](https://sabnzbd.org/wiki/installation/multicore-par2))
 - `unrar` (make sure you get the "official" non-free version of unrar)
 

README.mkd

@@ -1,47 +1,52 @@
-Release Notes - SABnzbd 3.3.0 
+Release Notes - SABnzbd 3.5.2
 =========================================================
 
-## Changes since 3.2.1
-- The `External internet access` will automatically detect local network
-  and no longer requires local network ranges to be defined. Custom ranges 
-  can still be defined through `local_ranges` in Special settings.
-- Allow setting `inet_exposure` from the command line.
-- Support prefix and netmask for Special setting `local_ranges`.
-- The `Unwanted extensions` detection can be set to `Whitelist`-mode. 
-  This will block or pause all jobs with non-matching extensions.
-- Servers article statistics are shown in K, G, M-notation.
-- Resolution added as a pattern key (`%r`) for Sorting.
-- Optimized performance of par2 file parsing.
-- CPU usage optimizations in the download process.
-- Revised handling of categories, scripts, and priorities when adding NZB's.
-- Download statistics are also shown when no History is shown.
-- Confirm rename if Direct Unpack is active for the job.
-- Obfuscated-RAR detection will always be performed.
-- All requests will be logged, not just API calls.
-- Stability improvement to encrypted RAR-detection.
-- Allow missing extensions in `Unwanted extensions` detection.
-- Removed Special setting `max_art_opt`.
-- Add notification that Plush will be removed in 3.4.0.
-- Windows/macOS: Update UnRar to 6.0.1.
-- Windows: Update Multipar to 1.3.1.7 (adds faster verification).
+## Bugfix since 3.5.1
+- Reverted change to file assembly that resulted in disk errors.
 
-## Bugfixes since 3.2.1
-- Prevent failed post-processing if job name ends in multiple dots or spaces.
-- Failing articles could result in jobs being stuck at 99%.
-- Jobs could be stuck in the queue or duplicate if they had missing articles.
-- Prevent jobs getting stuck at 99% due to unreliable servers.
-- CRC/yEnc errors would be counted twice as bad articles.
-- Some NZB files would incorrectly be marked as empty.
-- API-call `history` would not filter active post-processing by `nzo_ids`.
-- Login page could be accessed even if `External internet access` was set
-  to `No access`. Any other calls would still be blocked.
-- Ignore duplicate files inside messy NZB's.
-- Windows: `Deobfuscate final filenames` could fail to deobfuscate.
-- macOS: Disk space would be incorrect for very large disks.
+## Changes and bugfixes since 3.5.0
+- Prevent permissions errors on systems that do not support them.
+- Small changes in file assembly and Direct Unpack processing.
+- Changes to the transition from download to active post-processing.
+- Malformed NZB files could result in a crash.
+- Prevent crash in Direct Unpack for obfuscated posts.
+- RSS feeds with HTML-characters in the name resulted in crashes.
+- macOS: failed to start on older macOS versions.
+
+## Changes since 3.4.2
+- Removed Python 3.6 support.
+- SOCKS5 proxy support for all outgoing connections.
+- Restored support for UUencoded jobs.
+- `Required` server option: in case of connection failures, the queue
+  will be paused for a few minutes instead of skipping the server.
+- Added Special option to preserve paused state after a restart.
+- Show an estimated time-left indicator for repair and unpacking.
+- Require TLS version 1.2 or higher for SSL news server connections.
+- Setting custom ciphers forces the maximum TLS version to 1.2.
+- Reduced memory usage during and after parsing `.nzb` files.
+- Handle multiple passwords stored in NZB-file.
+- macOS/Linux: `Permissions` are only applied if any are set.
+- macOS/Windows: updated to Python 3.10.2.
+- macOS: run native on M1 systems. However, included tools
+  (`par2`, `unrar` and `7za`) still require Rosetta emulation.
+- Snap: updated to `core20` base and restore 7zip support.
+
+## Bugfixes since 3.4.2
+- Global interface settings would not always be applied correctly.
+- Email notification setting was not shown correctly.
+- Improvements and fixes for `Defobfuscate final filenames`.
+- `Post-Process Only Verified Jobs` would not always work as intended.
+- Correctly detect too little disk space when unpacking 7zip's.
+- Improvements to handling of repair by MultiPar and par2cmdline.
+- HTML characters in configuration fields were shown incorrectly.
+- On Retry the number of downloaded bytes could exceed the total bytes.
+- `unrar` logging of Direct Unpack was not logged if it was aborted.
+- Windows: `portable.cmd` was not included in the release.
+- Windows: print low-level Windows error on `IOError`.
 
 ## Upgrade notices
-- The download statistics file `totals10.sab` is updated in 3.2.x 
-  version. If you downgrade to 3.1.x or lower, detailed download 
+- The download statistics file `totals10.sab` is updated in 3.2.x
+  version. If you downgrade to 3.1.x or lower, detailed download
   statistics will be lost.
 
 ## Known problems and solutions
@@ -54,4 +59,4 @@ Release Notes - SABnzbd 3.3.0
   that automatically verify, repair, extract and clean up posts downloaded
   from Usenet.
 
-  (c) Copyright 2007-2021 by "The SABnzbd-team" \<team@sabnzbd.org\>
+  (c) Copyright 2007-2022 by "The SABnzbd-team" \<team@sabnzbd.org\>

SABnzbd.py

@@ -1,5 +1,5 @@
 #!/usr/bin/python3 -OO
-# Copyright 2007-2021 The SABnzbd-Team <team@sabnzbd.org>
+# Copyright 2007-2022 The SABnzbd-Team <team@sabnzbd.org>
 #
 # This program is free software; you can redistribute it and/or
 # modify it under the terms of the GNU General Public License
@@ -17,11 +17,12 @@
 
 import sys
 
-if sys.hexversion < 0x03060000:
-    print("Sorry, requires Python 3.6 or above")
+if sys.hexversion < 0x03070000:
+    print("Sorry, requires Python 3.7 or above")
     print("You can read more at: https://sabnzbd.org/wiki/installation/install-off-modules")
     sys.exit(1)
 
+import os
 import logging
 import logging.handlers
 import importlib.util
@@ -31,6 +32,7 @@ import signal
 import socket
 import platform
 import subprocess
+import multiprocessing
 import ssl
 import time
 import re
@@ -45,6 +47,9 @@ try:
     import portend
     import cryptography
     import chardet
+    import guessit
+    import puremagic
+    import socks
 except ImportError as e:
     print("Not all required Python modules are available, please check requirements.txt")
     print("Missing module:", e.name)
@@ -55,7 +60,23 @@ except ImportError as e:
 import sabnzbd
 import sabnzbd.lang
 import sabnzbd.interface
-from sabnzbd.constants import *
+from sabnzbd.constants import (
+    DEF_TIMEOUT,
+    DEF_LOG_ERRFILE,
+    DEF_MAIN_TMPL,
+    DEF_STDINTF,
+    DEF_WORKDIR,
+    DEF_INTERFACES,
+    DEF_LANGUAGE,
+    VALID_NZB_FILES,
+    VALID_ARCHIVES,
+    DEF_INI_FILE,
+    MAX_WARNINGS,
+    RSS_FILE_NAME,
+    DEF_LOG_FILE,
+    DEF_STDCONFIG,
+    DEF_LOG_CHERRY,
+)
 import sabnzbd.newsunpack
 from sabnzbd.misc import (
     check_latest_version,
@@ -69,12 +90,14 @@ from sabnzbd.misc import (
     upload_file_to_sabnzbd,
     is_localhost,
     is_lan_addr,
+    ip_in_subnet,
+    helpful_warning,
+    set_https_verification,
 )
 from sabnzbd.filesystem import get_ext, real_path, long_path, globber_full, remove_file
 from sabnzbd.panic import panic_tmpl, panic_port, panic_host, panic, launch_a_browser
 import sabnzbd.config as config
 import sabnzbd.cfg
-import sabnzbd.downloader
 import sabnzbd.notifier as notifier
 import sabnzbd.zconfig
 from sabnzbd.getipaddress import localipv4, publicipv4, ipv6
@@ -88,11 +111,10 @@ try:
     import win32event
     import win32service
     import win32ts
-    import pywintypes
     import servicemanager
     from win32com.shell import shell, shellcon
 
-    from sabnzbd.utils.apireg import get_connection_info, set_connection_info, del_connection_info
+    from sabnzbd.utils.apireg import get_connection_info, set_connection_info
     import sabnzbd.sabtray
 
     win32api.SetConsoleCtrlHandler(sabnzbd.sig_handler, True)
@@ -111,16 +133,6 @@ def guard_loglevel():
     LOG_FLAG = True
 
 
-def warning_helpful(*args, **kwargs):
-    """Wrapper to ignore helpfull warnings if desired"""
-    if sabnzbd.cfg.helpfull_warnings():
-        return logging.warning(*args, **kwargs)
-    return logging.info(*args, **kwargs)
-
-
-logging.warning_helpful = warning_helpful
-
-
 class GUIHandler(logging.Handler):
     """Logging handler collects the last warnings/errors/exceptions
     to be displayed in the web-gui
@@ -228,7 +240,7 @@ def print_version():
             """
 %s-%s
 
-Copyright (C) 2007-2021 The SABnzbd-Team <team@sabnzbd.org>
+Copyright (C) 2007-2022 The SABnzbd-Team <team@sabnzbd.org>
 SABnzbd comes with ABSOLUTELY NO WARRANTY.
 This is free software, and you are welcome to redistribute it
 under certain conditions. It is licensed under the
@@ -313,7 +325,7 @@ def identify_web_template(key, defweb, wdir):
     full_main = real_path(full_dir, DEF_MAIN_TMPL)
 
     if not os.path.exists(full_main):
-        logging.warning_helpful(T("Cannot find web template: %s, trying standard template"), full_main)
+        helpful_warning(T("Cannot find web template: %s, trying standard template"), full_main)
         full_dir = real_path(sabnzbd.DIR_INTERFACES, DEF_STDINTF)
         full_main = real_path(full_dir, DEF_MAIN_TMPL)
         if not os.path.exists(full_main):
@@ -342,7 +354,7 @@ def fix_webname(name):
         xname = ""
     if xname in ("Default",):
         return "Glitter"
-    elif xname in ("Glitter", "Plush"):
+    elif xname in ("Glitter",):
         return xname
     elif xname in ("Wizard",):
         return name.lower()
@@ -445,9 +457,7 @@ def print_modules():
         if sabnzbd.newsunpack.RAR_PROBLEM:
             have_str = "%.2f" % (float(sabnzbd.newsunpack.RAR_VERSION) / 100)
             want_str = "%.2f" % (float(sabnzbd.constants.REC_RAR_VERSION) / 100)
-            logging.warning_helpful(
-                T("Your UNRAR version is %s, we recommend version %s or higher.<br />"), have_str, want_str
-            )
+            helpful_warning(T("Your UNRAR version is %s, we recommend version %s or higher.<br />"), have_str, want_str)
         elif not (sabnzbd.WIN32 or sabnzbd.DARWIN):
             logging.info("UNRAR binary version %.2f", (float(sabnzbd.newsunpack.RAR_VERSION) / 100))
     else:
@@ -456,8 +466,10 @@ def print_modules():
         sabnzbd.NO_DOWNLOADING = True
 
     # If available, we prefer 7zip over unzip
-    if sabnzbd.newsunpack.SEVEN_COMMAND:
-        logging.info("7za binary... found (%s)", sabnzbd.newsunpack.SEVEN_COMMAND)
+    if sabnzbd.newsunpack.SEVENZIP_COMMAND:
+        logging.info("7za binary... found (%s)", sabnzbd.newsunpack.SEVENZIP_COMMAND)
+        if not (sabnzbd.WIN32 or sabnzbd.DARWIN):
+            logging.info("7za binary version %s", sabnzbd.newsunpack.SEVENZIP_VERSION)
     else:
         logging.info(T("7za binary... NOT found!"))
 
@@ -617,7 +629,7 @@ def get_webhost(cherryhost, cherryport, https_port):
         logging.info("IPV6 has priority on this system, potential Firefox issue")
 
     if ipv6 and ipv4 and cherryhost == "" and sabnzbd.WIN32:
-        logging.warning_helpful(T("Please be aware the 0.0.0.0 hostname will need an IPv6 address for external access"))
+        helpful_warning(T("Please be aware the 0.0.0.0 hostname will need an IPv6 address for external access"))
 
     if cherryhost == "localhost" and not sabnzbd.WIN32 and not sabnzbd.DARWIN:
         # On the Ubuntu family, localhost leads to problems for CherryPy
@@ -670,9 +682,9 @@ def is_sabnzbd_running(url):
     try:
         url = "%s&mode=version" % url
         # Do this without certificate verification, few installations will have that
-        prev = sabnzbd.set_https_verification(False)
+        prev = set_https_verification(False)
         ver = get_from_url(url)
-        sabnzbd.set_https_verification(prev)
+        set_https_verification(prev)
         return ver and (re.search(r"\d+\.\d+\.", ver) or ver.strip() == sabnzbd.__version__)
     except:
         return False
@@ -700,10 +712,10 @@ def check_for_sabnzbd(url, upload_nzbs, allow_browser=True):
     if is_sabnzbd_running(url):
         # Upload any specified nzb files to the running instance
         if upload_nzbs:
-            prev = sabnzbd.set_https_verification(False)
+            prev = set_https_verification(False)
             for f in upload_nzbs:
                 upload_file_to_sabnzbd(url, f)
-            sabnzbd.set_https_verification(prev)
+            set_https_verification(prev)
         else:
             # Launch the web browser and quit since sabnzbd is already running
             # Trim away everything after the final slash in the URL
@@ -975,12 +987,6 @@ def main():
     logger.setLevel(logging.WARNING)
     logger.addHandler(gui_log)
 
-    # Detect CPU architecture and Windows variant
-    # Use .machine as .processor is not always filled
-    cpu_architecture = platform.uname().machine
-    if sabnzbd.WIN32:
-        sabnzbd.WIN64 = cpu_architecture == "AMD64"
-
     if inifile:
         # INI file given, simplest case
         inifile = evaluate_inipath(inifile)
@@ -1174,7 +1180,7 @@ def main():
     logging.info("Arguments = %s", sabnzbd.CMDLINE)
     logging.info("Python-version = %s", sys.version)
     logging.info("Dockerized = %s", sabnzbd.DOCKER)
-    logging.info("CPU architecture = %s", cpu_architecture)
+    logging.info("CPU architecture = %s", platform.uname().machine)
 
     try:
         logging.info("Platform = %s - %s", os.name, platform.platform())
@@ -1187,13 +1193,20 @@ def main():
 
     # On Linux/FreeBSD/Unix "UTF-8" is strongly, strongly adviced:
     if not sabnzbd.WIN32 and not sabnzbd.DARWIN and not ("utf-8" in sabnzbd.encoding.CODEPAGE.lower()):
-        logging.warning_helpful(
+        helpful_warning(
             T(
                 "SABnzbd was started with encoding %s, this should be UTF-8. Expect problems with Unicoded file and directory names in downloads."
             ),
             sabnzbd.encoding.CODEPAGE,
         )
 
+    # Verify umask, we need at least 700
+    if not sabnzbd.WIN32 and sabnzbd.ORG_UMASK > int("077", 8):
+        sabnzbd.misc.helpful_warning(
+            T("Current umask (%o) might deny SABnzbd access to the files and folders it creates."),
+            sabnzbd.ORG_UMASK,
+        )
+
     # SSL Information
     logging.info("SSL version = %s", ssl.OPENSSL_VERSION)
 
@@ -1421,12 +1434,11 @@ def main():
     try:
         cherrypy.engine.start()
     except:
+        # Since the webserver is started by cherrypy in a separate thread, we can't really catch any
+        # start-up errors. This try/except only catches very few errors, the rest is only shown in the console.
         logging.error(T("Failed to start web-interface: "), exc_info=True)
         abort_and_show_error(browserhost, cherryport)
 
-    # Wait for server to become ready
-    cherrypy.engine.wait(cherrypy.process.wspbus.states.STARTED)
-
     if sabnzbd.WIN32:
         if enable_https:
             mode = "s"
@@ -1450,6 +1462,9 @@ def main():
     if sabnzbd.NO_DOWNLOADING:
         return
 
+    # Apply proxy, if configured, before main requests are made
+    sabnzbd.misc.set_socks5_proxy()
+
     # Start all SABnzbd tasks
     logging.info("Starting %s-%s", sabnzbd.MY_NAME, sabnzbd.__version__)
     try:
@@ -1461,7 +1476,7 @@ def main():
     # Upload any nzb/zip/rar/nzb.gz/nzb.bz2 files from file association
     if upload_nzbs:
         for upload_nzb in upload_nzbs:
-            sabnzbd.add_nzbfile(upload_nzb)
+            sabnzbd.nzbparser.add_nzbfile(upload_nzb)
 
     # Set URL for browser
     if enable_https:
@@ -1488,7 +1503,14 @@ def main():
             external_host = localipv4()
         logging.debug("Using %s as host address for Bonjour and SSDP", external_host)
 
-        if is_lan_addr(external_host):
+        # Only broadcast to local network addresses. If local ranges have been defined, further
+        # restrict broadcasts to those specific ranges in order to avoid broadcasting to the "wrong"
+        # private network when the system is connected to multiple such networks (e.g. a corporate
+        # VPN in addition to a standard household LAN).
+        if is_lan_addr(external_host) and (
+            (not sabnzbd.cfg.local_ranges()) or any(ip_in_subnet(external_host, r) for r in sabnzbd.cfg.local_ranges())
+        ):
+            # Start Bonjour and SSDP
             sabnzbd.zconfig.set_bonjour(external_host, cherryport)
 
             # Set URL for browser for external hosts
@@ -1535,7 +1557,7 @@ def main():
         # 30 sec polling tasks
         if not timer % 10:
             # Keep OS awake (if needed)
-            sabnzbd.keep_awake()
+            sabnzbd.misc.keep_awake()
             # Restart scheduler (if needed)
             sabnzbd.Scheduler.restart(plan_restart=False)
             # Save config (if needed)
@@ -1714,6 +1736,9 @@ def handle_windows_service():
 
 
 if __name__ == "__main__":
+    # Require for freezing
+    multiprocessing.freeze_support()
+
     # We can only register these in the main thread
     signal.signal(signal.SIGINT, sabnzbd.sig_handler)
     signal.signal(signal.SIGTERM, sabnzbd.sig_handler)

builder/SABnzbd.spec

@@ -6,6 +6,7 @@ import pkginfo
 from PyInstaller.building.api import EXE, COLLECT, PYZ
 from PyInstaller.building.build_main import Analysis
 from PyInstaller.building.osx import BUNDLE
+from PyInstaller.utils.hooks import collect_data_files, collect_submodules
 
 # Add extra files in the PyInstaller-spec
 extra_pyinstaller_files = []
@@ -27,7 +28,6 @@ extra_folders = [
     "licenses/",
     "locale/",
     "email/",
-    "interfaces/Plush/",
     "interfaces/Glitter/",
     "interfaces/wizard/",
     "interfaces/Config/",
@@ -40,6 +40,8 @@ RELEASE_VERSION = pkginfo.Develop(".").version
 
 # Add hidden imports
 extra_hiddenimports = ["Cheetah.DummyTransaction", "cheroot.ssl.builtin", "certifi"]
+extra_hiddenimports.extend(collect_submodules("babelfish.converters"))
+extra_hiddenimports.extend(collect_submodules("guessit.data"))
 
 # Add platform specific stuff
 if sys.platform == "darwin":
@@ -65,6 +67,7 @@ else:
     # Windows
     extra_hiddenimports.append("win32timezone")
     extra_folders += ["win/multipar/", "win/unrar/", "win/7zip/"]
+    extra_files += ["portable.cmd"]
 
     # Parse the version info
     version_regexed = re.search(r"(\d+)\.(\d+)\.(\d+)([a-zA-Z]*)(\d*)", RELEASE_VERSION)
@@ -110,6 +113,10 @@ for file_item in extra_files:
 for folder_item in extra_folders:
     extra_pyinstaller_files.append((folder_item, folder_item))
 
+# Add babelfish data files
+extra_pyinstaller_files.extend(collect_data_files("babelfish"))
+extra_pyinstaller_files.extend(collect_data_files("guessit"))
+
 pyi_analysis = Analysis(
     ["SABnzbd.py"],
     datas=extra_pyinstaller_files,
@@ -130,6 +137,7 @@ exe = EXE(
     append_pkg=False,
     icon="icons/sabnzbd.ico",
     version=version_info,
+    target_arch="universal2",
 )
 
 coll = COLLECT(exe, pyi_analysis.binaries, pyi_analysis.zipfiles, pyi_analysis.datas, name="SABnzbd")

builder/osx/requirements.txt

@@ -0,0 +1,3 @@
+# Special requirements for macOS universal2 binary release
+# This way dependabot can auto-update them
+cryptography==36.0.1

builder/package.py

@@ -20,13 +20,16 @@ import platform
 import re
 import sys
 import os
+import tempfile
 import time
 import shutil
 import subprocess
 import tarfile
+import urllib.request
+import urllib.error
+import configobj
 import pkginfo
 import github
-from distutils.dir_util import copy_tree
 
 
 VERSION_FILE = "sabnzbd/version.py"
@@ -49,7 +52,6 @@ extra_folders = [
     "licenses/",
     "locale/",
     "email/",
-    "interfaces/Plush/",
     "interfaces/Glitter/",
     "interfaces/wizard/",
     "interfaces/Config/",
@@ -116,6 +118,62 @@ def patch_version_file(release_name):
         ver.write(version_file)
 
 
+def test_sab_binary(binary_path: str):
+    """Wrapper to have a simple start-up test for the binary"""
+    with tempfile.TemporaryDirectory() as config_dir:
+        sabnzbd_process = subprocess.Popen(
+            [binary_path, "--browser", "0", "--logging", "2", "--config", config_dir],
+            text=True,
+            stdout=subprocess.PIPE,
+            stderr=subprocess.STDOUT,
+        )
+
+        # Wait for SAB to respond
+        base_url = "http://127.0.0.1:8080/"
+        for _ in range(10):
+            try:
+                urllib.request.urlopen(base_url, timeout=1).read()
+                break
+            except urllib.error.URLError:
+                time.sleep(1)
+        else:
+            raise urllib.error.URLError("Could not connect to SABnzbd")
+
+        # Open a number of API calls and pages, to see if we are really up
+        pages_to_test = [
+            "",
+            "wizard",
+            "config",
+            "config/server",
+            "config/categories",
+            "config/scheduling",
+            "config/rss",
+            "config/general",
+            "config/folders",
+            "config/switches",
+            "config/sorting",
+            "config/notify",
+            "config/special",
+            "api?mode=version",
+        ]
+        for url in pages_to_test:
+            print("Testing: %s%s" % (base_url, url))
+            if b"500 Internal Server Error" in urllib.request.urlopen(base_url + url, timeout=1).read():
+                raise RuntimeError("Crash in %s" % url)
+
+        # Parse API-key so we can do a graceful shutdown
+        sab_config = configobj.ConfigObj(os.path.join(config_dir, "sabnzbd.ini"))
+        urllib.request.urlopen(base_url + "shutdown/?apikey=" + sab_config["misc"]["api_key"], timeout=10)
+        sabnzbd_process.wait()
+
+        # Print logs for verification
+        with open(os.path.join(config_dir, "logs", "sabnzbd.log"), "r") as log_file:
+            print(log_file.read())
+
+        # So we have time to print the file before the directory is removed
+        time.sleep(1)
+
+
 if __name__ == "__main__":
     # Was any option supplied?
     if len(sys.argv) < 2:
@@ -148,6 +206,7 @@ if __name__ == "__main__":
     patch_version_file(RELEASE_VERSION)
 
     # To draft a release or not to draft a release?
+    ON_GITHUB_ACTIONS = os.environ.get("CI", False)
     RELEASE_THIS = "refs/tags/" in os.environ.get("GITHUB_REF", "")
 
     # Rename release notes file
@@ -186,8 +245,7 @@ if __name__ == "__main__":
         # Run PyInstaller and check output
         run_external_command([sys.executable, "-O", "-m", "PyInstaller", "SABnzbd.spec"])
 
-        # Use special distutils function to merge the main and console directories
-        copy_tree("dist/SABnzbd-console", "dist/SABnzbd")
+        shutil.copytree("dist/SABnzbd-console", "dist/SABnzbd", dirs_exist_ok=True)
         safe_remove("dist/SABnzbd-console")
 
         # Remove unwanted DLL's
@@ -228,11 +286,14 @@ if __name__ == "__main__":
             )
 
         # Rename the folder
-        os.rename("dist/SABnzbd", RELEASE_NAME)
+        shutil.copytree("dist/SABnzbd", RELEASE_NAME)
 
         # Create the archive
         run_external_command(["win/7zip/7za.exe", "a", RELEASE_BINARY, RELEASE_NAME])
 
+        # Test the release, as the very last step to not mess with any release code
+        test_sab_binary("dist/SABnzbd/SABnzbd.exe")
+
     if "app" in sys.argv:
         # Must be run on macOS
         if sys.platform != "darwin":
@@ -246,6 +307,15 @@ if __name__ == "__main__":
         # Run PyInstaller and check output
         run_external_command([sys.executable, "-O", "-m", "PyInstaller", "SABnzbd.spec"])
 
+        # Make sure we created a fully universal2 release when releasing or during CI
+        if RELEASE_THIS or ON_GITHUB_ACTIONS:
+            for bin_to_check in glob.glob("dist/SABnzbd.app/Contents/MacOS/**/*.so", recursive=True):
+                print("Checking if binary is universal2: %s" % bin_to_check)
+                file_output = run_external_command(["file", bin_to_check])
+                # Make sure we have both arm64 and x86
+                if not ("x86_64" in file_output and "arm64" in file_output):
+                    raise RuntimeError("Non-universal2 binary found!")
+
         # Only continue if we can sign
         if authority:
             files_to_sign = [
@@ -289,50 +359,24 @@ if __name__ == "__main__":
 
                 # Upload to Apple
                 print("Sending zip to Apple notarization service")
-                upload_process = run_external_command(
+                upload_result = run_external_command(
                     [
                         "xcrun",
-                        "altool",
-                        "--notarize-app",
-                        "-t",
-                        "osx",
-                        "-f",
+                        "notarytool",
+                        "submit",
                         notarization_zip,
-                        "--primary-bundle-id",
-                        "org.sabnzbd.sabnzbd",
-                        "-u",
+                        "--apple-id",
                         notarization_user,
-                        "-p",
+                        "--team-id",
+                        authority,
+                        "--password",
                         notarization_pass,
+                        "--wait",
                     ],
                 )
 
-                # Extract the notarization ID
-                m = re.match(".*RequestUUID = (.*?)\n", upload_process, re.S)
-                if not m:
-                    raise RuntimeError("No UUID created")
-                uuid = m.group(1)
-
-                print("Checking notarization of UUID: %s (every 30 seconds)" % uuid)
-                notarization_in_progress = True
-                while notarization_in_progress:
-                    time.sleep(30)
-                    check_status = run_external_command(
-                        [
-                            "xcrun",
-                            "altool",
-                            "--notarization-info",
-                            uuid,
-                            "-u",
-                            notarization_user,
-                            "-p",
-                            notarization_pass,
-                        ],
-                    )
-                    notarization_in_progress = "Status: in progress" in check_status
-
                 # Check if success
-                if "Status: success" not in check_status:
+                if "status: accepted" not in upload_result.lower():
                     raise RuntimeError("Failed to notarize..")
 
                 # Staple the notarization!
@@ -345,6 +389,9 @@ if __name__ == "__main__":
         else:
             print("Signing skipped, missing SIGNING_AUTH.")
 
+        # Test the release, as the very last step to not mess with any release code
+        test_sab_binary("dist/SABnzbd.app/Contents/MacOS/SABnzbd")
+
     if "source" in sys.argv:
         # Prepare Source distribution package.
         # We assume the sources are freshly cloned from the repo
@@ -362,7 +409,7 @@ if __name__ == "__main__":
 
         # Copy all folders and files to the new folder
         for source_folder in extra_folders:
-            copy_tree(source_folder, os.path.join(src_folder, source_folder))
+            shutil.copytree(source_folder, os.path.join(src_folder, source_folder), dirs_exist_ok=True)
 
         # Copy all files
         for source_file in extra_files:
@@ -461,6 +508,23 @@ if __name__ == "__main__":
                     print("Uploading %s to release %s" % (file_to_check, gh_release.title))
                     gh_release.upload_asset(file_to_check)
 
+            # Check if we now have all files
+            gh_new_assets = gh_release.get_assets()
+            if gh_new_assets.totalCount:
+                all_assets = [gh_asset.name for gh_asset in gh_new_assets]
+
+                # Check if we have all files, using set-comparison
+                if set(files_to_check) == set(all_assets):
+                    print("All assets present, releasing %s" % RELEASE_VERSION)
+                    # Publish release
+                    gh_release.update_release(
+                        tag_name=RELEASE_VERSION,
+                        name=RELEASE_TITLE,
+                        message=readme_data,
+                        draft=False,
+                        prerelease=prerelease,
+                    )
+
             # Update the website
             gh_repo_web = gh_obj.get_repo("sabnzbd/sabnzbd.github.io")
             # Check if the branch already exists, only create one if it doesn't

builder/requirements.txt

@@ -1,9 +1,18 @@
 # Basic build requirements
-pyinstaller==4.2
-setuptools
-pkginfo
+# Note that not all sub-dependencies are listed, but only ones we know could cause trouble
+pyinstaller==4.8
+pyinstaller-hooks-contrib==2022.0
+altgraph==0.17.2
+wrapt==1.13.3
+setuptools==60.6.0
+pkginfo==1.8.2
+PyGithub==1.55
+charset-normalizer==2.0.11
 certifi
-pygithub
 
-# For the OSX build specific
-dmgbuild; sys_platform == 'darwin'
+# For the macOS build
+dmgbuild==1.5.2; sys_platform == 'darwin'
+mac-alias==2.2.0; sys_platform == 'darwin'
+macholib==1.15.2; sys_platform == 'darwin'
+ds-store==1.3.0; sys_platform == 'darwin'
+PyNaCl==1.5.0; sys_platform == 'darwin'

interfaces/Config/templates/config.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="Config"#-->
-<!--#set global $help_uri="configuration/3.3/configure"#-->
+<!--#set global $help_uri="configuration/3.5/configure"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 
 <!--#from sabnzbd.encoding import CODEPAGE#-->
@@ -124,7 +124,7 @@
 
 <div class="colmask">
     <div class="padding alt">
-        <h5 class="copyright">Copyright &copy; 2007-2021 The SABnzbd Team &lt;<a href="mailto:team@sabnzbd.org">team@sabnzbd.org</a>&gt;</h5>
+        <h5 class="copyright">Copyright &copy; 2007-2022 The SABnzbd Team &lt;<a href="mailto:team@sabnzbd.org">team@sabnzbd.org</a>&gt;</h5>
         <p class="copyright"><small>$T('yourRights')</small></p>
     </div>
 

interfaces/Config/templates/config_cat.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="Categories"#-->
-<!--#set global $help_uri="configuration/3.3/categories"#-->
+<!--#set global $help_uri="configuration/3.5/categories"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 <div class="colmask">
     <div class="section">

interfaces/Config/templates/config_folders.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="Folders"#-->
-<!--#set global $help_uri="configuration/3.3/folders"#-->
+<!--#set global $help_uri="configuration/3.5/folders"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 
 <div class="colmask">
@@ -10,6 +10,7 @@
     </div>
     <form action="saveDirectories" method="post" name="fullform" class="fullform" autocomplete="off">
     <input type="hidden" id="apikey" name="apikey" value="$apikey" />
+    <input type="hidden" name="output" value="json" />
     <input type="hidden" id="ajax" name="ajax" value="1" />
     <div class="section">
         <div class="col2">

interfaces/Config/templates/config_general.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="General"#-->
-<!--#set global $help_uri="configuration/3.3/general"#-->
+<!--#set global $help_uri="configuration/3.5/general"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 
 <div class="colmask">
@@ -10,7 +10,8 @@
     </div>
     <form action="saveGeneral" method="post" name="fullform" class="fullform" autocomplete="off">
     <input type="hidden" id="apikey" name="apikey" value="$apikey" />
-    <input type="hidden" id="ajax" name="ajax" value=1 />
+    <input type="hidden" id="ajax" name="ajax" value="1" />
+    <input type="hidden" name="output" value="json" />
     <div class="section">
         <div class="col2">
             <h3>$T('webServer') <a href="$helpuri$help_uri" target="_blank"><span class="glyphicon glyphicon-question-sign"></span></a></h3>
@@ -178,6 +179,11 @@
                     <input type="checkbox" name="enable_https_verification" id="enable_https_verification" value="1" <!--#if int($enable_https_verification) > 0 then 'checked="checked"' else ""#--> <!--#if int($certificate_validation) == 0 then "disabled=\"disabled\"" else ""#--> />
                     <span class="desc">$T('explain-enable_https_verification')</span>
                 </div>
+                <div class="field-pair advanced-settings">
+                    <label class="config" for="socks5_proxy_url">$T('opt-socks5_proxy_url')</label>
+                    <input type="text" name="socks5_proxy_url" id="socks5_proxy_url" value="$socks5_proxy_url" placeholder="socks5://username:password@hostname:port" />
+                    <span class="desc">$T('explain-socks5_proxy_url') <br/>$T('readwiki')</span>
+                </div>
                 <div class="field-pair">
                     <button class="btn btn-default saveButton"><span class="glyphicon glyphicon-ok"></span> $T('button-saveChanges')</button>
                 </div>
@@ -283,7 +289,7 @@
     \$('#apikey, #nzbkey').click(function () { \$(this).select() });
 
     \$('#generate_new_apikey').click(function () {
-      if (confirm("$T('Plush-confirm')")) {
+      if (confirm("$T('confirm')")) {
         $.ajax({
           type: "POST",
           url: "../../api",
@@ -296,7 +302,7 @@
       }
     });
     \$('#generate_new_nzbkey').click(function () {
-      if (confirm("$T('Plush-confirm')")) {
+      if (confirm("$T('confirm')")) {
         $.ajax({
           type: "POST",
           url: "../../api",

interfaces/Config/templates/config_notify.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="Email"#-->
-<!--#set global $help_uri="configuration/3.3/notifications"#-->
+<!--#set global $help_uri="configuration/3.5/notifications"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 
 <!--#def show_notify_checkboxes($section_label)#-->
@@ -22,12 +22,14 @@
                 <option value="$ct" <!--#if $ct in $getVar($section_label + '_cats') then 'selected="selected"' else ""#-->>$Tspec($ct)</option>
             <!--#end for#-->
         </select>
+        <p>$T('defaultNotifiesAll')</p>
     </div>
 <!--#end def#-->
 
 <div class="colmask">
-    <form action="saveEmail" method="post" name="fullform" class="fullform" autocomplete="off">
+    <form action="saveNotify" method="post" name="fullform" class="fullform" autocomplete="off">
     <input type="hidden" id="apikey" name="apikey" value="$apikey" />
+    <input type="hidden" name="output" value="json" />
     <input type="hidden" id="ajax" name="ajax" value="1" />
     <div class="section" id="email">
         <div class="col2">
@@ -39,6 +41,7 @@
                         <option value="$ct" <!--#if $ct in $email_cats then 'selected="selected"' else ""#-->>$Tspec($ct)</option>
                     <!--#end for#-->
                 </select>
+                <p>$T('defaultNotifiesAll')</p>
             </div>
         </div>
         <div class="col1">
@@ -238,12 +241,12 @@
                             $T($notify_types[$type]).replace('/', ' / ')
                         </label>
                         <select name="${section_label}_prio_$type" id="${section_label}_prio_$type">
-                            <option value="-3" <!--#if $getVar($section_label + '_prio_' + $type) == -3 then 'selected="selected"' else ""#--> >$T('prowl-off')</option>
-                            <option value="-2" <!--#if $getVar($section_label + '_prio_' + $type) == -2 then 'selected="selected"' else ""#--> >$T('prowl-very-low')</option>
-                            <option value="-1" <!--#if $getVar($section_label + '_prio_' + $type) == -1 then 'selected="selected"' else ""#--> >$T('prowl-moderate')</option>
-                            <option value="0"  <!--#if $getVar($section_label + '_prio_' + $type) == 0  then 'selected="selected"' else ""#--> >$T('prowl-normal')</option>
-                            <option value="1"  <!--#if $getVar($section_label + '_prio_' + $type) == 1  then 'selected="selected"' else ""#--> >$T('prowl-high')</option>
-                            <option value="2"  <!--#if $getVar($section_label + '_prio_' + $type) == 2  then 'selected="selected"' else ""#--> >$T('prowl-emergency')</option>
+                            <option value="-3" <!--#if $getVar($section_label + '_prio_' + $type) == "-3" then 'selected="selected"' else ""#--> >$T('prowl-off')</option>
+                            <option value="-2" <!--#if $getVar($section_label + '_prio_' + $type) == "-2" then 'selected="selected"' else ""#--> >$T('prowl-very-low')</option>
+                            <option value="-1" <!--#if $getVar($section_label + '_prio_' + $type) == "-1" then 'selected="selected"' else ""#--> >$T('prowl-moderate')</option>
+                            <option value="0"  <!--#if $getVar($section_label + '_prio_' + $type) == "0"  then 'selected="selected"' else ""#--> >$T('prowl-normal')</option>
+                            <option value="1"  <!--#if $getVar($section_label + '_prio_' + $type) == "1"  then 'selected="selected"' else ""#--> >$T('prowl-high')</option>
+                            <option value="2"  <!--#if $getVar($section_label + '_prio_' + $type) == "2"  then 'selected="selected"' else ""#--> >$T('prowl-emergency')</option>
                         </select>
                     </div>
                 <!--#end for#-->
@@ -304,12 +307,12 @@
                             $T($notify_types[$type]).replace('/', ' / ')
                         </label>
                         <select name="${section_label}_prio_$type" id="${section_label}_prio_$type">
-                            <option value="-3" <!--#if $getVar($section_label + '_prio_' + $type) == -3 then 'selected="selected"' else ""#--> >$T('pushover-off')</option>
-                            <option value="-2" <!--#if $getVar($section_label + '_prio_' + $type) == -2 then 'selected="selected"' else ""#--> >$T('prowl-very-low')</option>
-                            <option value="-1" <!--#if $getVar($section_label + '_prio_' + $type) == -1 then 'selected="selected"' else ""#--> >$T('pushover-low')</option>
-                            <option value="0"  <!--#if $getVar($section_label + '_prio_' + $type) == 0  then 'selected="selected"' else ""#--> >$T('prowl-normal')</option>
-                            <option value="1"  <!--#if $getVar($section_label + '_prio_' + $type) == 1  then 'selected="selected"' else ""#--> >$T('pushover-high')</option>
-                            <option value="2"  <!--#if $getVar($section_label + '_prio_' + $type) == 2  then 'selected="selected"' else ""#--> >$T('prowl-emergency')</option>
+                            <option value="-3" <!--#if $getVar($section_label + '_prio_' + $type) == "-3" then 'selected="selected"' else ""#--> >$T('pushover-off')</option>
+                            <option value="-2" <!--#if $getVar($section_label + '_prio_' + $type) == "-2" then 'selected="selected"' else ""#--> >$T('prowl-very-low')</option>
+                            <option value="-1" <!--#if $getVar($section_label + '_prio_' + $type) == "-1" then 'selected="selected"' else ""#--> >$T('pushover-low')</option>
+                            <option value="0"  <!--#if $getVar($section_label + '_prio_' + $type) == "0"  then 'selected="selected"' else ""#--> >$T('prowl-normal')</option>
+                            <option value="1"  <!--#if $getVar($section_label + '_prio_' + $type) == "1"  then 'selected="selected"' else ""#--> >$T('pushover-high')</option>
+                            <option value="2"  <!--#if $getVar($section_label + '_prio_' + $type) == "2"  then 'selected="selected"' else ""#--> >$T('prowl-emergency')</option>
                         </select>
                     </div>
                 <!--#end for#-->

interfaces/Config/templates/config_rss.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="RSS"#-->
-<!--#set global $help_uri="configuration/3.3/rss"#-->
+<!--#set global $help_uri="configuration/3.5/rss"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 <!--#import html#-->
 <div class="colmask">
@@ -53,7 +53,7 @@
                                 </td>
                                 <td class="title">
                                     <a href="?feed=$rss[$feed_item]['link']" class="subscription-title path feed <!--#if int($rss[$feed_item]['enable']) != 0 then 'feed_enabled' else 'feed_disabled'#-->">
-                                         $feed_item
+                                         $feed_item_html
                                     </a>
                                 </td>
                                 <td class="controls">
@@ -102,7 +102,7 @@
     </div>
     <!--#end if#-->
     <!--#if $active_feed#-->
-    <!--#set $feed = $active_feed#-->
+    <!--#set $feed = html.unescape($active_feed)#-->
     <div class="section rss-section">
         <div class="padTable">
             <a class="main-helplink" href="$helpuri$help_uri" target="_blank"><span class="glyphicon glyphicon-question-sign"></span></a>
@@ -113,12 +113,12 @@
             <!--#if $error#-->
             <div class="alert alert-danger">
                 <span class="glyphicon glyphicon-exclamation-sign"></span>
-                <!--#echo html.escape($error)#-->
+                $error
             </div>
             <!--#end if#-->
             <form action="upd_rss_feed" method="post">
                 <input type="hidden" name="apikey" value="$apikey" />
-                <input type="hidden" name="feed" value="$feed" />
+                <input type="hidden" name="feed" value="$active_feed" />
                 <input type="hidden" name="uri" value="$rss[$feed]['uris']" />
                 <table class="catTable">
                     <thead>
@@ -210,7 +210,7 @@
             <form action="upd_rss_filter" method="post">
                 <input type="hidden" name="apikey" value="$apikey" />
                 <input type="hidden" name="index" value="$rss[$feed]['filtercount']" />
-                <input type="hidden" name="feed" value="$feed" />
+                <input type="hidden" name="feed" value="$active_feed" />
                 <table class="catTable">
                     <tbody>
                         <tr>
@@ -286,7 +286,7 @@
                 <form action="upd_rss_filter" method="post" autocomplete="off">
                     <input type="hidden" name="apikey" value="$apikey" />
                     <input type="hidden" name="index" value="$fnum" />
-                    <input type="hidden" name="feed" value="$feed" />
+                    <input type="hidden" name="feed" value="$active_feed" />
                     <table class="catTable">
                         <tbody>
                             <tr class="<!--#if $odd then " alt " else " "#--> <!--#if $filter[3]!="A" and $filter[3]!="S" then 'disabled_options_rule' else ""#-->">
@@ -302,8 +302,8 @@
                                         <option value="M" <!--#if $filter[3]=="M" then 'selected="selected"' else ""#-->> $T('rss-must')</option>
                                         <option value="R" <!--#if $filter[3]=="R" then 'selected="selected"' else ""#-->> $T('rss-reject')</option>
                                         <option value="C" <!--#if $filter[3]=="C" then 'selected="selected"' else ""#-->> $T('rss-mustcat')</option>
-                                        <option value=">" <!--#if $filter[3]==">" then 'selected="selected"' else ""#-->> $T('rss-atleast')</option>
-                                        <option value="<" <!--#if $filter[3]=="<" then 'selected="selected"' else ""#-->> $T('rss-atmost')</option>
+                                        <option value=">" <!--#if $filter[3]=="&gt;" then 'selected="selected"' else ""#-->> $T('rss-atleast')</option>
+                                        <option value="<" <!--#if $filter[3]=="&lt;" then 'selected="selected"' else ""#-->> $T('rss-atmost')</option>
                                         <option value="F" <!--#if $filter[3]=="F" then 'selected="selected"' else ""#-->> $T('rss-from')</option>
                                         <option value="S" <!--#if $filter[3]=="S" then 'selected="selected"' else ""#-->> $T('rss-from-show') ($T('rss-accept'))</option>
                                     </select>
@@ -363,13 +363,13 @@
             <!--#end for#-->
             <form action="download_rss_feed" method="post">
                 <input type="hidden" name="apikey" value="$apikey" />
-                <input type="hidden" name="feed" value="$feed" />
+                <input type="hidden" name="feed" value="$active_feed" />
                 <div class="padding">
-                    <button type="button" class="btn btn-default testFeed" rel="$feed"><span class="glyphicon glyphicon-sort"></span> $T('button-preFeed')</button>
+                    <button type="button" class="btn btn-default testFeed" rel="$active_feed"><span class="glyphicon glyphicon-sort"></span> $T('button-preFeed')</button>
                     <button type="submit" class="btn btn-default Save"><span class="glyphicon glyphicon-forward"></span> $T('button-forceFeed')</button>
                     <button type="button" class="btn btn-default cleanFeed"><span class="glyphicon glyphicon-trash"></span> $T('button-clear') $T('rss-done')</button>
                     <!--#if $evalButton#-->
-                      <button type="button" class="btn btn-default evalFeed" rel="$feed"><span class="glyphicon glyphicon-ok-circle"></span> $T('button-evalFeed')</button>
+                      <button type="button" class="btn btn-default evalFeed" rel="$active_feed"><span class="glyphicon glyphicon-ok-circle"></span> $T('button-evalFeed')</button>
                     <!--#end if#-->
                 </div>
             </form>
@@ -402,7 +402,7 @@
                     <tr class="infoTableSeperator">
                         <td>
                             <form action="download" method="get">
-                                <input type="hidden" value="$feed" name="feed" />
+                                <input type="hidden" value="$active_feed" name="feed" />
                                 <input type="hidden" name="apikey" value="$apikey" />
                                 <input type="hidden" name="url" value="$job['url']" />
                                 <input type="hidden" name="nzbname" value="$job['nzbname']" />
@@ -446,7 +446,7 @@
                     <tr class="infoTableSeperator">
                         <td>
                             <form action="download" method="get">
-                                <input type="hidden" value="$feed" name="feed" />
+                                <input type="hidden" value="$active_feed" name="feed" />
                                 <input type="hidden" name="apikey" value="$apikey" />
                                 <input type="hidden" name="url" value="$job['url']" />
                                 <input type="hidden" name="nzbname" value="$job['nzbname']" />
@@ -475,7 +475,7 @@
         <div class="tab-pane padTable" id="rss-tab-done">
             <!--#if $downloaded#-->
             <form action="clean_rss_jobs" method="post">
-                <input type="hidden" value="$feed" name="feed" />
+                <input type="hidden" value="$active_feed" name="feed" />
                 <input type="hidden" name="apikey" value="$apikey" />
                 <table class="catTable">
                     <thead>

interfaces/Config/templates/config_scheduling.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="Scheduling"#-->
-<!--#set global $help_uri="configuration/3.3/scheduling"#-->
+<!--#set global $help_uri="configuration/3.5/scheduling"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 
 <%

interfaces/Config/templates/config_server.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="Servers"#-->
-<!--#set global $help_uri="configuration/3.3/servers"#-->
+<!--#set global $help_uri="configuration/3.5/servers"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 
 <!--#import json#-->
@@ -34,6 +34,7 @@
         <div class="col1">
             <form action="addServer" method="post" autocomplete="off" onsubmit="removeObfuscation();">
                 <input type="hidden" name="apikey" value="$apikey" />
+                <input type="hidden" name="output" value="json" />
                 <fieldset>
                     <div class="field-pair">
                         <label class="config" for="enable">$T('srv-enable')</label>
@@ -102,6 +103,11 @@
                         <input type="checkbox" name="send_group" id="send_group" value="1" />
                         <span class="desc">$T('srv-explain-send_group')</span>
                     </div>
+                    <div class="field-pair advanced-settings">
+                        <label class="config" for="required">$T('srv-required')</label>
+                        <input type="checkbox" name="required" id="required" value="1" />
+                        <span class="desc">$T('explain-required')</span>
+                    </div>
                     <div class="field-pair advanced-settings">
                         <label class="config" for="optional">$T('srv-optional')</label>
                         <input type="checkbox" name="optional" id="optional" value="1" />
@@ -139,6 +145,7 @@
     <!--#for $cur, $server in enumerate($servers) #-->
         <form action="saveServer" method="post" class="fullform" autocomplete="off">
             <input type="hidden" name="apikey" value="$apikey" />
+            <input type="hidden" name="output" value="json" />
             <input type="hidden" name="server" value="$server['name']" />
             <input type="hidden" id="ajax" name="ajax" value=1 />
 
@@ -223,6 +230,11 @@
                             <span class="desc">$T('explain-ssl_ciphers') <br>$T('readwiki')
                             <a href="${helpuri}advanced/ssl-ciphers" target="_blank">${helpuri}advanced/ssl-ciphers</a></span>
                         </div>
+                        <div class="field-pair advanced-settings">
+                            <label class="config" for="required$cur">$T('srv-required')</label>
+                            <input type="checkbox" name="required" id="required$cur" value="1" <!--#if int($server['required']) != 0 then 'checked="checked"' else ""#--> />
+                            <span class="desc">$T('explain-required')</span>
+                        </div>
                         <div class="field-pair advanced-settings">
                             <label class="config" for="optional$cur">$T('srv-optional')</label>
                             <input type="checkbox" name="optional" id="optional$cur" value="1" <!--#if int($server['optional']) != 0 then 'checked="checked"' else ""#--> />
@@ -522,7 +534,7 @@
             \$.ajax({
                 type: "POST",
                 url: "../../api",
-                data: "mode=config&output=json&name=test_server&" + \$(this).parents('form:first').serialize()
+                data: "mode=config&name=test_server&" + \$(this).parents('form:first').serialize()
             }).then(function(data) {
                 // Let's replace the link
                 msg = data.value.message.replace('https://sabnzbd.org/certificate-errors', '<a href="https://sabnzbd.org/certificate-errors" class="alert-link" target="_blank">https://sabnzbd.org/certificate-errors</a>')
@@ -545,7 +557,7 @@
         });
 
         \$('.delServer').click(function(){
-            if( confirm("$T('Plush-confirm')") ) {
+            if( confirm("$T('confirm')") ) {
                 \$(this).parents('form:first').attr('action','delServer').submit();
                 // Let us leave!
                 formWasSubmitted = true;
@@ -556,7 +568,7 @@
         });
 
         \$('.clrServer').click(function(){
-            if( confirm("$T('Plush-confirm')") ) {
+            if( confirm("$T('confirm')") ) {
                 \$(this).parents('form:first').attr('action','clrServer').submit();
                 // Let us leave!
                 formWasSubmitted = true;

interfaces/Config/templates/config_sorting.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="Sorting"#-->
-<!--#set global $help_uri="configuration/3.3/sorting"#-->
+<!--#set global $help_uri="configuration/3.5/sorting"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 
 <div class="colmask">
@@ -11,12 +11,13 @@
                 <h3>$T('seriesSorting') <a href="$helpuri$help_uri#toc0" target="_blank"><span class="glyphicon glyphicon-question-sign"></span></a></h3>
                 <p>
                     <b>$T('affectedCat')</b><br/>
-                    <select name="tv_cat" multiple="multiple" class="multiple_cats">
+                    <select name="tv_categories" multiple="multiple" class="multiple_cats" required="required">
                         <!--#for $ct in $categories#-->
                         <option value="$ct" <!--#if $ct in $tv_categories then 'selected="selected"' else ""#--> >$Tspec($ct)</option>
                         <!--#end for#-->
                     </select>
                 </p>
+                <p>$T('selectOneCat')</p>
             </div>
             <!-- /col2 -->
             <div class="col1">
@@ -95,6 +96,26 @@
                                     <td>%s_N</td>
                                     <td>$T('show-us-name')</td>
                                 </tr>
+                                <tr>
+                                    <td class="align-right"><b>$T('Resolution'):</b></td>
+                                    <td>%r</td>
+                                    <td>1080p</td>
+                                </tr>
+                                <tr>
+                                    <td class="align-right"><b>$T('year'):</b></td>
+                                    <td>%y</td>
+                                    <td>2021</td>
+                                </tr>
+                                <tr>
+                                    <td class="align-right"><b>$T('decade'):</b></td>
+                                    <td>%decade</td>
+                                    <td>20</td>
+                                </tr>
+                                <tr>
+                                    <td>&nbsp;</td>
+                                    <td>%0decade</td>
+                                    <td>2020</td>
+                                </tr>
                                 <tr>
                                     <td class="align-right"><b>$T('show-seasonNum'):</b></td>
                                     <td>%s</td>
@@ -130,11 +151,6 @@
                                     <td>%e_n</td>
                                     <td>$T('ep-us-name')</td>
                                 </tr>
-                                <tr>
-                                    <td class="align-right"><b>$T('Resolution'):</b></td>
-                                    <td>%r</td>
-                                    <td>1080p</td>
-                                </tr>
                                 <tr>
                                     <td class="align-right"><b>$T('fileExt'):</b></td>
                                     <td>%ext</td>
@@ -156,6 +172,43 @@
                                     <td>$T('text')</td>
                                 </tr>
                             </tbody>
+                            <tbody>
+                                <tr>
+                                    <th class="align-right"><b>GuessIt</b></th>
+                                    <th>$T('sort-pattern')</th>
+                                    <th>$T('sort-result')</th>
+                                </tr>
+                            </tbody>
+                            <tbody>
+                                <tr>
+                                    <td class="align-right"><b>$T('sort-guessitMeaning'):</b></td>
+                                    <td>%GI&lt;$T('sort-guessitProperty')&gt;</td>
+                                    <td>$T('guessit-sp-property')</td>
+                                </tr>
+                                <tr>
+                                    <td class="align-right"><b></b></td>
+                                    <td>%G.I&lt;$T('sort-guessitProperty')&gt;</td>
+                                    <td>$T('guessit-dot-property')</td>
+                                </tr>
+                                <tr>
+                                    <td class="align-right"><b></b></td>
+                                    <td>%G_I&lt;$T('sort-guessitProperty')&gt;</td>
+                                    <td>$T('guessit-us-property')</td>
+                                </tr>
+                                <tr>
+                                    <td class="align-right"><b>$T('Example')</b></td>
+                                    <td>%GI&lt;audio_codec&gt;</td>
+                                    <td>DTS</td>
+                                </tr>
+                                <tr>
+                                    <td class="align-right" style="vertical-align:top;"><b>$T('Valid properties')</b></td>
+                                    <td colspan=2>
+                                        <!--#for $prop in $guessit_properties#-->
+                                        $prop<br>
+                                        <!--#end for#-->
+                                    </td>
+                                </tr>
+                            </tbody>
                         </table>
                     </div>
                     <div class="field-pair">
@@ -171,12 +224,13 @@
                 <h3>$T('movieSort') <a href="$helpuri$help_uri#toc6" target="_blank"><span class="glyphicon glyphicon-question-sign"></span></a></h3>
                 <p>
                     <b>$T('affectedCat')</b><br/>
-                    <select name="movie_cat" multiple="multiple" class="multiple_cats">
+                    <select name="movie_categories" multiple="multiple" class="multiple_cats" required="required">
                         <!--#for $ct in $categories#-->
                         <option value="$ct" <!--#if $ct in $movie_categories then 'selected="selected"' else ""#--> >$Tspec($ct)</option>
                         <!--#end for#-->
                     </select>
                 </p>
+                <p>$T('selectOneCat')</p>
             </div>
             <!-- /col2 -->
             <div class="col1">
@@ -230,6 +284,21 @@
                                 </tr>
                             </thead>
                             <tbody>
+                                <tr>
+                                    <td class="align-right"><b>$T('sort-title'):</b></td>
+                                    <td>%sn</td>
+                                    <td>$T('movie-sp-name') ($T('case-adjusted'))</td>
+                                </tr>
+                                <tr>
+                                    <td>&nbsp;</td>
+                                    <td>%s.n</td>
+                                    <td>$T('movie-dot-name') ($T('case-adjusted'))</td>
+                                </tr>
+                                <tr>
+                                    <td>&nbsp;</td>
+                                    <td>%s_n</td>
+                                    <td>$T('movie-us-name') ($T('case-adjusted'))</td>
+                                </tr>
                                 <tr>
                                     <td class="align-right"><b>$T('sort-title'):</b></td>
                                     <td>%title</td>
@@ -245,30 +314,30 @@
                                     <td>%_title</td>
                                     <td>$T('movie-us-name')</td>
                                 </tr>
-                                <tr>
-                                    <td class="align-right"><b>$T('year'):</b></td>
-                                    <td>%y</td>
-                                    <td>2009</td>
-                                </tr>
                                 <tr>
                                     <td class="align-right"><b>$T('Resolution'):</b></td>
                                     <td>%r</td>
                                     <td>1080p</td>
                                 </tr>
                                 <tr>
-                                    <td class="align-right"><b>$T('extension'):</b></td>
-                                    <td>%ext</td>
-                                    <td>avi</td>
+                                    <td class="align-right"><b>$T('year'):</b></td>
+                                    <td>%y</td>
+                                    <td>2021</td>
                                 </tr>
                                 <tr>
                                     <td class="align-right"><b>$T('decade'):</b></td>
                                     <td>%decade</td>
-                                    <td>00</td>
+                                    <td>20</td>
                                 </tr>
                                 <tr>
                                     <td>&nbsp;</td>
                                     <td>%0decade</td>
-                                    <td>2000</td>
+                                    <td>2020</td>
+                                </tr>
+                                <tr>
+                                    <td class="align-right"><b>$T('extension'):</b></td>
+                                    <td>%ext</td>
+                                    <td>avi</td>
                                 </tr>
                                 <tr>
                                     <td class="align-right"><b>$T('orgFilename'):</b></td>
@@ -300,6 +369,43 @@
                                     <td>1</td>
                                 </tr>
                             </tbody>
+                            <tbody>
+                                <tr>
+                                    <th class="align-right"><b>GuessIt</b></th>
+                                    <th>$T('sort-pattern')</th>
+                                    <th>$T('sort-result')</th>
+                                </tr>
+                            </tbody>
+                            <tbody>
+                                <tr>
+                                    <td class="align-right"><b>$T('sort-guessitMeaning'):</b></td>
+                                    <td>%GI&lt;$T('sort-guessitProperty')&gt;</td>
+                                    <td>$T('guessit-sp-property')</td>
+                                </tr>
+                                <tr>
+                                    <td class="align-right"><b></b></td>
+                                    <td>%G.I&lt;$T('sort-guessitProperty')&gt;</td>
+                                    <td>$T('guessit-dot-property')</td>
+                                </tr>
+                                <tr>
+                                    <td class="align-right"><b></b></td>
+                                    <td>%G_I&lt;$T('sort-guessitProperty')&gt;</td>
+                                    <td>$T('guessit-us-property')</td>
+                                </tr>
+                                <tr>
+                                    <td class="align-right"><b>$T('Example')</b></td>
+                                    <td>%GI&lt;audio_codec&gt;</td>
+                                    <td>DTS</td>
+                                </tr>
+                                <tr>
+                                    <td class="align-right" style="vertical-align:top;"><b>$T('Valid properties')</b></td>
+                                    <td colspan=2>
+                                        <!--#for $prop in $guessit_properties#-->
+                                        $prop<br>
+                                        <!--#end for#-->
+                                    </td>
+                                </tr>
+                            </tbody>
                         </table>
                     </div>
                     <div class="field-pair">
@@ -315,12 +421,13 @@
                 <h3>$T('dateSorting') <a href="$helpuri$help_uri#toc9" target="_blank"><span class="glyphicon glyphicon-question-sign"></span></a></h3>
                 <p>
                     <b>$T('affectedCat')</b><br/>
-                    <select name="date_cat" multiple="multiple" class="multiple_cats">
+                    <select name="date_categories" multiple="multiple" class="multiple_cats" required="required">
                         <!--#for $ct in $categories#-->
                         <option value="$ct" <!--#if $ct in $date_categories then 'selected="selected"' else ""#--> >$Tspec($ct)</option>
                         <!--#end for#-->
                     </select>
                 </p>
+                <p>$T('selectOneCat')</p>
             </div>
             <!-- /col2 -->
             <div class="col1">
@@ -367,6 +474,21 @@
                                 </tr>
                             </thead>
                             <tbody>
+                                <tr>
+                                    <td class="align-right"><b>$T('show-name'):</b></td>
+                                    <td>%sn</td>
+                                    <td>$T('show-sp-name') ($T('case-adjusted'))</td>
+                                </tr>
+                                <tr>
+                                    <td>&nbsp;</td>
+                                    <td>%s.n</td>
+                                    <td>$T('show-dot-name') ($T('case-adjusted'))</td>
+                                </tr>
+                                <tr>
+                                    <td>&nbsp;</td>
+                                    <td>%s_n</td>
+                                    <td>$T('show-us-name') ($T('case-adjusted'))</td>
+                                </tr>
                                 <tr>
                                     <td class="align-right"><b>$T('show-name'):</b></td>
                                     <td>%t</td>
@@ -382,10 +504,25 @@
                                     <td>%_t</td>
                                     <td>$T('show-us-name')</td>
                                 </tr>
+                                <tr>
+                                    <td class="align-right"><b>$T('Resolution'):</b></td>
+                                    <td>%r</td>
+                                    <td>1080p</td>
+                                </tr>
                                 <tr>
                                     <td class="align-right"><b>$T('year'):</b></td>
                                     <td>%y</td>
-                                    <td>2009</td>
+                                    <td>2021</td>
+                                </tr>
+                                <tr>
+                                    <td class="align-right"><b>$T('decade'):</b></td>
+                                    <td>%decade</td>
+                                    <td>20</td>
+                                </tr>
+                                <tr>
+                                    <td>&nbsp;</td>
+                                    <td>%0decade</td>
+                                    <td>2020</td>
                                 </tr>
                                 <tr>
                                     <td class="align-right"><b>$T('month'):</b></td>
@@ -408,19 +545,14 @@
                                     <td>02</td>
                                 </tr>
                                 <tr>
-                                    <td class="align-right"><b>$T('decade'):</b></td>
-                                    <td>%decade</td>
-                                    <td>00</td>
+                                    <td class="align-right"><b>$T('ep-name'):</b></td>
+                                    <td>%en</td>
+                                    <td>$T('ep-sp-name')</td>
                                 </tr>
                                 <tr>
                                     <td>&nbsp;</td>
-                                    <td>%0decade</td>
-                                    <td>2000</td>
-                                </tr>
-                                <tr>
-                                    <td class="align-right"><b>$T('Resolution'):</b></td>
-                                    <td>%r</td>
-                                    <td>1080p</td>
+                                    <td>%e.n</td>
+                                    <td>$T('ep-dot-name')</td>
                                 </tr>
                                 <tr>
                                     <td class="align-right"><b>$T('orgFilename'):</b></td>
@@ -438,6 +570,43 @@
                                     <td>$T('text')</td>
                                 </tr>
                             </tbody>
+                            <tbody>
+                                <tr>
+                                    <th class="align-right"><b>GuessIt</b></th>
+                                    <th>$T('sort-pattern')</th>
+                                    <th>$T('sort-result')</th>
+                                </tr>
+                            </tbody>
+                            <tbody>
+                                <tr>
+                                    <td class="align-right"><b>$T('sort-guessitMeaning'):</b></td>
+                                    <td>%GI&lt;$T('sort-guessitProperty')&gt;</td>
+                                    <td>$T('guessit-sp-property')</td>
+                                </tr>
+                                <tr>
+                                    <td class="align-right"><b></b></td>
+                                    <td>%G.I&lt;$T('sort-guessitProperty')&gt;</td>
+                                    <td>$T('guessit-dot-property')</td>
+                                </tr>
+                                <tr>
+                                    <td class="align-right"><b></b></td>
+                                    <td>%G_I&lt;$T('sort-guessitProperty')&gt;</td>
+                                    <td>$T('guessit-us-property')</td>
+                                </tr>
+                                <tr>
+                                    <td class="align-right"><b>$T('Example')</b></td>
+                                    <td>%GI&lt;audio_codec&gt;</td>
+                                    <td>DTS</td>
+                                </tr>
+                                <tr>
+                                    <td class="align-right" style="vertical-align:top;"><b>$T('Valid properties')</b></td>
+                                    <td colspan=2>
+                                        <!--#for $prop in $guessit_properties#-->
+                                        $prop<br>
+                                        <!--#end for#-->
+                                    </td>
+                                </tr>
+                            </tbody>
                         </table>
                     </div>
                     <div class="field-pair">

interfaces/Config/templates/config_special.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="Special"#-->
-<!--#set global $help_uri="configuration/3.3/special"#-->
+<!--#set global $help_uri="configuration/3.5/special"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 
 <div class="colmask">

interfaces/Config/templates/config_switches.tmpl

@@ -1,5 +1,5 @@
 <!--#set global $pane="Switches"#-->
-<!--#set global $help_uri="configuration/3.3/switches"#-->
+<!--#set global $help_uri="configuration/3.5/switches"#-->
 <!--#include $webdir + "/_inc_header_uc.tmpl"#-->
 
 <div class="colmask">
@@ -11,6 +11,7 @@
     <form action="saveSwitches" method="post" name="fullform" class="fullform" autocomplete="off">
         <input type="hidden" id="apikey" name="apikey" value="$apikey" />
         <input type="hidden" id="ajax" name="ajax" value="1" />
+        <input type="hidden" name="output" value="json" />
         <div class="section advanced-settings">
             <div class="col2">
                 <h3>$T('swtag-server') <a href="$helpuri$help_uri#toc1" target="_blank"><span class="glyphicon glyphicon-question-sign"></span></a></h3>
@@ -244,7 +245,7 @@
                     <div class="field-pair">
                         <label class="config" for="deobfuscate_final_filenames">$T('opt-deobfuscate_final_filenames')</label>
                         <input type="checkbox" name="deobfuscate_final_filenames" id="deobfuscate_final_filenames" value="1" <!--#if int($deobfuscate_final_filenames) > 0 then 'checked="checked"' else ""#--> />
-                        <span class="desc">$T('explain-deobfuscate_final_filenames')</span>
+                        <span class="desc">$T('explain-deobfuscate_final_filenames') $T('explain-deobfuscate_final_filenames-ext')</span>
                     </div>
                     <div class="field-pair advanced-settings">
                         <label class="config" for="enable_meta">$T('opt-enable_meta')</label>

interfaces/Config/templates/staticcfg/js/script.js

@@ -261,7 +261,7 @@ function do_restart() {
     $('.main-restarting .restarting-url').text(urlTotal)
 
     // Initiate restart
-    $.ajax({ url: '../../config/restart?apikey=' + sabSession,
+    $.ajax({ url: '../../api?mode=restart&apikey=' + sabSession,
         complete: function() {
             // Keep counter of failures
             var loopCounter = 0;

interfaces/Glitter/templates/history.tmpl

@@ -1 +0,0 @@
-  

interfaces/Glitter/templates/include_overlays.tmpl

@@ -85,6 +85,11 @@
                 </ul>
                 <div class="tab-content">
                     <div class="tab-pane fade in active" id="options-status">
+                        <div class="row" data-bind="visible: statusInfo.active_socks5_proxy">
+                            <div class="col-sm-6">$T('opt-socks5_proxy_url') &nbsp </div>
+                            <div class="col-sm-6" data-bind="visible: hasStatusInfo, text: statusInfo.active_socks5_proxy"></div>
+                            <div class="col-sm-6 col-loading" data-bind="visible: !hasStatusInfo()">$T('Glitter-loading')<span class="loader-dot-one">.</span><span class="loader-dot-two">.</span><span class="loader-dot-three">.</span></div>
+                        </div>
                         <div class="row">
                             <div class="col-sm-6">$T('dashboard-localIP4') &nbsp; </div>
                             <div class="col-sm-6" data-bind="visible: hasStatusInfo, text: !statusInfo.localipv4() ? '$T('dashboard-connectionError')' : statusInfo.localipv4(), css: { 'options-bad-status' : !statusInfo.localipv4() }"></div>
@@ -116,7 +121,7 @@
                             <div class="col-sm-6">$T('dashboard-systemPerformance') &nbsp; </div>
                             <div class="col-sm-6" data-bind="visible: hasPerformanceInfo">
                                 <span data-bind="text: statusInfo.pystone"></span>
-                                <a href="#" data-bind="click: testDiskSpeed" data-tooltip="true" data-placement="right" title="$T('dashboard-repeatTest')"><span class="glyphicon glyphicon-repeat"></span></a>
+                                <a href="#" class="diskspeed-button" data-bind="click: loadStatusInfo" data-tooltip="true" data-placement="right" title="$T('dashboard-repeatTest')"><span class="glyphicon glyphicon-repeat"></span></a>
                                 <small data-bind="truncatedText: statusInfo.cpumodel, length: 25, attr: { 'data-original-title': statusInfo.cpumodel }" data-tooltip="true"></small>
                             </div>
                             <div class="col-sm-6 col-loading" data-bind="visible: !hasPerformanceInfo()">$T('Glitter-loading')<span class="loader-dot-one">.</span><span class="loader-dot-two">.</span><span class="loader-dot-three">.</span></div>
@@ -125,7 +130,7 @@
                             <div class="col-sm-6">$T('dashboard-downloadDirSpeed') &nbsp; </div>
                             <div class="col-sm-6" data-bind="visible: hasPerformanceInfo">
                                 <span data-bind="text: statusInfo.downloaddirspeed()"></span> MB/s
-                                <a href="#" class="diskspeed-button" data-bind="click: testDiskSpeed" data-tooltip="true" data-placement="right" title="$T('dashboard-repeatTest')"><span class="glyphicon glyphicon-repeat"></span></a>
+                                <a href="#" class="diskspeed-button" data-bind="click: loadStatusInfo" data-tooltip="true" data-placement="right" title="$T('dashboard-repeatTest')"><span class="glyphicon glyphicon-repeat"></span></a>
                                 <small>(<span data-bind="truncatedText: statusInfo.downloaddir, length: 24, attr: { 'data-original-title': statusInfo.downloaddir }" data-tooltip="true"></span>)</small>
                             </div>
                             <div class="col-sm-6 col-loading" data-bind="visible: !hasPerformanceInfo()">$T('Glitter-loading')<span class="loader-dot-one">.</span><span class="loader-dot-two">.</span><span class="loader-dot-three">.</span></div>
@@ -134,7 +139,7 @@
                             <div class="col-sm-6">$T('dashboard-completeDirSpeed') &nbsp; </div>
                             <div class="col-sm-6" data-bind="visible: hasPerformanceInfo">
                                 <span data-bind="text: statusInfo.completedirspeed()"></span> MB/s
-                                <a href="#" class="diskspeed-button" data-bind="click: testDiskSpeed" data-tooltip="true" data-placement="right" title="$T('dashboard-repeatTest')"><span class="glyphicon glyphicon-repeat"></span></a>
+                                <a href="#" class="diskspeed-button" data-bind="click: loadStatusInfo" data-tooltip="true" data-placement="right" title="$T('dashboard-repeatTest')"><span class="glyphicon glyphicon-repeat"></span></a>
                                 <small>(<span data-bind="truncatedText: statusInfo.completedir, length: 24, attr: { 'data-original-title': statusInfo.completedir }" data-tooltip="true"></span>)</small>
                             </div>
                             <div class="col-sm-6 col-loading" data-bind="visible: !hasPerformanceInfo()">$T('Glitter-loading')<span class="loader-dot-one">.</span><span class="loader-dot-two">.</span><span class="loader-dot-three">.</span></div>
@@ -143,7 +148,7 @@
                             <div class="col-sm-6">$T('dashboard-internetBandwidth') &nbsp; </div>
                             <div class="col-sm-6" data-bind="visible: hasPerformanceInfo">
                                 <span data-bind="text: statusInfo.internetbandwidth()"></span> MB/s
-                                <a href="#" class="diskspeed-button" data-bind="click: testDiskSpeed" data-tooltip="true" data-placement="right" title="$T('dashboard-repeatTest')"><span class="glyphicon glyphicon-repeat"></span></a>
+                                <a href="#" class="diskspeed-button" data-bind="click: loadStatusInfo" data-tooltip="true" data-placement="right" title="$T('dashboard-repeatTest')"><span class="glyphicon glyphicon-repeat"></span></a>
                                 <small>(<span data-bind="text: statusInfo.internetbandwidth()*8"></span> Mbps)</small>
                             </div>
                             <div class="col-sm-6 col-loading" data-bind="visible: !hasPerformanceInfo()">$T('Glitter-loading')<span class="loader-dot-one">.</span><span class="loader-dot-two">.</span><span class="loader-dot-three">.</span></div>
@@ -170,7 +175,7 @@
                         </div>
                         <div class="row options-function-box">
                             <div class="col-sm-6">
-                                <a href="./status/showlog?apikey=$apikey" target="_blank" class="btn btn-default" data-tooltip="true" data-placement="top" title="$T('Glitter-logText')">
+                                <a href="./api?mode=showlog&apikey=$apikey" target="_blank" class="btn btn-default" data-tooltip="true" data-placement="top" title="$T('Glitter-logText')">
                                     <span class="glyphicon glyphicon-file"></span> $T('link-showLog')
                                 </a>
                             </div>
@@ -285,8 +290,8 @@
                                 <tr>
                                     <td><span class="glyphicon glyphicon-folder-open"></span></td>
                                     <td class="row-wrap-text"><strong data-bind="html: \$data"></strong></td>
-                                    <td><a href="#" data-bind="click: \$root.folderProcess" data-action="add" class="hover-button" data-tooltip="true" data-placement="left" title="$T('Glitter-backToQueue')"><span class="glyphicon glyphicon-plus-sign"></span></a></td>
-                                    <td><a href="#" data-bind="click: \$root.folderProcess" data-action="delete" class="hover-button" data-tooltip="true" data-placement="left" title="$T('Glitter-deleteJobAndFolders')"><span class="glyphicon glyphicon-trash"></span></a></td>
+                                    <td><a href="#" data-bind="click: \$root.folderProcess" data-action="add_orphan" class="hover-button" data-tooltip="true" data-placement="left" title="$T('Glitter-backToQueue')"><span class="glyphicon glyphicon-plus-sign"></span></a></td>
+                                    <td><a href="#" data-bind="click: \$root.folderProcess" data-action="delete_orphan" class="hover-button" data-tooltip="true" data-placement="left" title="$T('Glitter-deleteJobAndFolders')"><span class="glyphicon glyphicon-trash"></span></a></td>
                                 </tr>
                             </tbody>
                         </table>
@@ -348,7 +353,6 @@
                                     </select>
                                 </div>
                             </div>
-                            <div class="options-switch"></div>
                             <div class="form-group">
                                 <label class="col-sm-6 control-label">$T('Glitter-dateFormat')</label>
                                 <div class="col-sm-4">

interfaces/Glitter/templates/nzo.tmpl

@@ -1 +0,0 @@
-  

interfaces/Glitter/templates/queue.tmpl

@@ -1,40 +0,0 @@
-<!--#if $paused#-->
-    <!--#if $pause_int != '0' #-->
-        <!--#from math import floor#-->
-
-        <!--#set pauseSplit = $pause_int.split(':')#-->
-        <!--#set seconds = int(pauseSplit[0]) * 60 + int(pauseSplit[1])#-->
-        <!--#set hours = floor(seconds/3600)#-->
-        <!--#set minutes = floor((seconds - hours * 3600) / 60)#-->
-        <!--#set seconds = seconds - minutes * 60 - hours * 3600#-->
-
-        <!--#if seconds < 10 #-->
-            <!--#set seconds = '0' + str(int(seconds)) #-->
-        <!--#else#-->
-            <!--#set seconds = str(int(seconds)) #-->
-        <!--#end if#-->
-
-        <!--#if (minutes < 10) & (hours > 0) #-->
-            <!--#set minutes = '0' + str(int(minutes)) #-->
-        <!--#else#-->
-            <!--#set minutes = str(int(minutes)) #-->
-        <!--#end if#-->
-
-        <!--#if hours > 0 #-->
-            <!--#set timeString = str(int(hours)) + ":" + minutes + ":" + seconds#-->
-        <!--#else#-->
-            <!--#set timeString = minutes + ":" + seconds#-->
-        <!--#end if#-->
-    <!--#end if#-->
-
-    $T('post-Paused') <!--#if $pause_int != '0' #-->($timeString) <!--#end if#-->
-    <!--#if float($mbleft) > 0#-->
-        - $sizeleft $T('Glitter-left')
-    <!--#end if#-->
-    - SABnzbd
-<!--#else if float($mbleft) < 0.1#-->
-    SABnzbd
-<!--#else#-->
-    ${speed}B/s - $sizeleft $T('Glitter-left') - SABnzbd
-<!--#end if#-->
-|||<!--#echo "%.0f" % float($kbpersec)#-->

interfaces/Glitter/templates/static/javascripts/glitter.basic.js

@@ -1,7 +1,6 @@
 /**
     Base variables and functions
 **/
-var fadeOnDeleteDuration = 400; // ms after deleting a row
 var isMobile = (/android|webos|iphone|ipad|ipod|blackberry|iemobile|opera mini/i.test(navigator.userAgent.toLowerCase()));
 
 // To avoid problems when localStorage is disabled
@@ -57,42 +56,6 @@ function callSpecialAPI(url, data) {
     return $.when(ajaxQuery);
 }
 
-/**
-    Handle visibility changes so we
-    do only incremental update when not visible
-**/
-var pageIsVisible = true;
-// Set the name of the hidden property and the change event for visibility
-var hidden, visibilityChange;
-if(typeof document.hidden !== "undefined") { // Opera 12.10 and Firefox 18 and later support
-    hidden = "hidden";
-    visibilityChange = "visibilitychange";
-} else if(typeof document.mozHidden !== "undefined") {
-    hidden = "mozHidden";
-    visibilityChange = "mozvisibilitychange";
-} else if(typeof document.msHidden !== "undefined") {
-    hidden = "msHidden";
-    visibilityChange = "msvisibilitychange";
-} else if(typeof document.webkitHidden !== "undefined") {
-    hidden = "webkitHidden";
-    visibilityChange = "webkitvisibilitychange";
-}
-
-// Set the global visibility
-function handleVisibilityChange() {
-    if(document[hidden]) {
-        pageIsVisible = false;
-    } else {
-        pageIsVisible = true;
-    }
-}
-
-// Add event listener only for supported browsers
-if(typeof document.addEventListener !== "undefined" && typeof document[hidden] !== "undefined") {
-    // Handle page visibility change
-    document.addEventListener(visibilityChange, handleVisibilityChange, false);
-}
-
 /***
     GENERAL FUNCTIONS
 ***/
@@ -264,18 +227,13 @@ function showNotification(notiName, notiTimeout, fileCounter) {
     // Remove after timeout
     if(notiTimeout) {
         setTimeout(function() {
-            hideNotification(true);
+            hideNotification();
         }, notiTimeout)
     }
 }
 
 // Hide notification
-function hideNotification(fadeItOut) {
-    // Hide the box with or without effect
-    if(fadeItOut) {
-        $('.main-notification-box').fadeOut()
-    } else {
-        $('.main-notification-box').hide()
-    }
-
+function hideNotification() {
+    // Hide the box with effect
+    $('.main-notification-box').fadeOut()
 }

interfaces/Glitter/templates/static/javascripts/glitter.filelist.pagination.js

@@ -4,6 +4,9 @@ function Fileslisting(parent) {
     self.parent = parent;
     self.fileItems = ko.observableArray([]);
 
+    // Prevent flash of unstyled content when deleting items
+    self.fileItems.extend({ rateLimit: 50 })
+
     // Need to reserve these names to be overwritten
     self.filelist_name = ko.observable();
     self.filelist_password = ko.observable();
@@ -30,42 +33,17 @@ function Fileslisting(parent) {
         $('#modal-item-files').modal('show');
 
         // Stop updating on closing of the modal
-        $('#modal-item-files').on('hidden.bs.modal', function() {
+        $('#modal-item-files').on('hidden.bs.modal', function () {
             self.removeUpdate();
         })
     }
 
-    // Move to top and bottom buttons
-    self.moveButton = function (item,event) {
-        var targetRow, sourceRow, tbody;
-        sourceRow = $(event.currentTarget).parents("tr").filter(":first");
-        tbody = sourceRow.parents("tbody").filter(":first");
-        ko.utils.domData.set(sourceRow[0], "ko_sourceIndex", ko.utils.arrayIndexOf(sourceRow.parent().children(), sourceRow[0]));
-        sourceRow = sourceRow.detach();
-        if ($(event.currentTarget).is(".buttonMoveToTop")) {
-            // we are moving to the top
-            targetRow = tbody.children(".files-done").filter(":last");
-        } else {
-            //we are moving to the bottom
-            targetRow = tbody.children(".files-sortable").filter(":last");
-        }
-        if(targetRow.length < 1 ){
-        // we found an edge case and need to do something special
-            targetRow = tbody.children(".files-sortable").filter(":first");
-            sourceRow.insertBefore(targetRow[0]);
-        } else {
-            sourceRow.insertAfter($(targetRow[0]));
-        }
-        tbody.sortable('option', 'update').call(tbody[0],null, { item: sourceRow });
-    };
-
     // Trigger update
     self.triggerUpdate = function() {
         // Call API
         callAPI({
             mode: 'get_files',
-            value: self.currentItem.id,
-            limit: 5
+            value: self.currentItem.id
         }).then(function(response) {
             // When there's no files left we close the modal and the update will be stopped
             // For example when the job has finished downloading
@@ -124,36 +102,57 @@ function Fileslisting(parent) {
     self.move = function(event) {
         // How much did we move?
         var nrMoves = event.sourceIndex - event.targetIndex;
-        var direction = (nrMoves > 0 ? 'Up' : 'Down')
+        var direction = (nrMoves > 0 ? 'up' : 'down')
 
-        // We have to create the data-structure before, to be able to use the name as a key
-        var dataToSend = {};
-        dataToSend[event.item.nzf_id()] = 'on';
-        dataToSend['apikey'] = apiKey;
-        dataToSend['action_key'] = direction;
-        dataToSend['action_size'] = Math.abs(nrMoves);
+        callAPI({
+            mode: 'move_nzf_bulk',
+            name: direction,
+            value: self.currentItem.id,
+            nzf_ids: event.item.nzf_id(),
+            size: Math.abs(nrMoves)
+        }).then(function() {
+            // Refresh all the files
+            self.loadFiles(self.currentItem)
+        })
+    };
 
-        // Activate with this weird URL "API"
-        callSpecialAPI("./nzb/" + self.currentItem.id + "/bulk_operation/", dataToSend)
+    // Move to top and bottom buttons
+    self.moveButton = function (item, event) {
+        // Up or down?
+        var direction = "bottom"
+        if ($(event.currentTarget).is(".buttonMoveToTop")) {
+            // we are moving to the top
+            direction = "top"
+        }
+
+        callAPI({
+            mode: 'move_nzf_bulk',
+            name: direction,
+            value: self.currentItem.id,
+            nzf_ids: item.nzf_id()
+        }).then(function() {
+            // Refresh all the files
+            self.loadFiles(self.currentItem)
+        })
     };
 
     // Remove selected files
     self.removeSelectedFiles = function() {
-        // We have to create the data-structure before, to be able to use the name as a key
-        var dataToSend = {};
-        dataToSend['apikey'] = apiKey;
-        dataToSend['action_key'] = 'Delete';
-
         // Get all selected ones
+        var nzfIds = []
         $('.item-files-table input:checked:not(:disabled)').each(function() {
             // Add this item
-            dataToSend[$(this).prop('name')] = 'on';
+            nzfIds.push($(this).prop('name'))
         })
 
-        // Activate with this weird URL "API"
-        callSpecialAPI("./nzb/" + self.currentItem.id + "/bulk_operation/", dataToSend).then(function() {
-            // Set state of the check-all
-            setCheckAllState('#modal-item-files .multioperations-selector input[type="checkbox"]', '#modal-item-files .files-sortable input')
+        callAPI({
+            mode: 'queue',
+            name: 'delete_nzf',
+            value: self.currentItem.id,
+            value2: nzfIds.join()
+        }).then(function() {
+            // Refresh all the files
+            self.loadFiles(self.currentItem)
         })
     }
 

interfaces/Glitter/templates/static/javascripts/glitter.history.js

@@ -8,7 +8,7 @@ function HistoryListModel(parent) {
     // Variables
     self.lastUpdate = 0;
     self.historyItems = ko.observableArray([])
-    self.showFailed = ko.observable(false);
+    self.showFailed = ko.observable(false).extend({ persist: 'historyShowFailed' });
     self.isLoading = ko.observable(false).extend({ rateLimit: 100 });
     self.searchTerm = ko.observable('').extend({ rateLimit: { timeout: 200, method: "notifyWhenChangesStop" } });
     self.paginationLimit = ko.observable(10).extend({ persist: 'historyPaginationLimit' });
@@ -116,14 +116,15 @@ function HistoryListModel(parent) {
     self.retryJob = function(form) {
         // Adding a extra retry file happens through this special function
         var data = new FormData();
+        data.append("mode", "retry");
         data.append("nzbfile", $(form.nzbFile)[0].files[0]);
-        data.append("job", $('#modal-retry-job input[name="retry_job_id"]').val());
+        data.append("value", $('#modal-retry-job input[name="retry_job_id"]').val());
         data.append("password", $('#retry_job_password').val());
         data.append("apikey", apiKey);
 
         // Add
         $.ajax({
-            url: "./retry_pp",
+            url: "./api",
             type: "POST",
             cache: false,
             processData: false,

interfaces/Glitter/templates/static/javascripts/glitter.main.js

@@ -21,7 +21,7 @@ function ViewModel() {
     self.extraQueueColumns = ko.observableArray([]).extend({ persist: 'extraColumns' });
     self.extraHistoryColumns = ko.observableArray([]).extend({ persist: 'extraHistoryColumns' });
     self.showActiveConnections = ko.observable(false).extend({ persist: 'showActiveConnections' });
-    self.speedMetrics = { K: "KB/s", M: "MB/s", G: "GB/s" };
+    self.speedMetrics = { '': "B/s", K: "KB/s", M: "MB/s", G: "GB/s" };
 
     // Set information varibales
     self.title = ko.observable();
@@ -55,6 +55,7 @@ function ViewModel() {
     self.statusInfo = {};
     self.statusInfo.folders = ko.observableArray([]);
     self.statusInfo.servers = ko.observableArray([]);
+    self.statusInfo.active_socks5_proxy = ko.observable();
     self.statusInfo.localipv4 = ko.observable();
     self.statusInfo.publicipv4 = ko.observable();
     self.statusInfo.ipv6 = ko.observable();
@@ -236,6 +237,12 @@ function ViewModel() {
                     values: sabSpeedHistory
                 })
 
+                // Add option to open the server details tab
+                $('.sparkline-container').click(function() {
+                    $('a[href="#modal-options"]').trigger('click')
+                    $('a[href="#options_connections"]').trigger('click')
+                })
+
             } else {
                 // Update
                 $('.sparkline').text(self.speedHistory.join(",")).change()
@@ -323,47 +330,6 @@ function ViewModel() {
         // Clear previous timeout to prevent double-calls
         clearTimeout(self.interval);
 
-        /**
-            Limited refresh
-        **/
-        // Only update the title when page not visible
-        if(!pageIsVisible) {
-            // Request new title
-            callSpecialAPI('./queue/', { limit: 1, start: 0 }).done(function(data) {
-                // Split title & speed
-                var dataSplit = data.split('|||');
-
-                // Maybe the result is actually the login page?
-                if(dataSplit[0].substring(0, 11) === '<html lang=') {
-                    // Redirect
-                    document.location = document.location
-                    return
-                }
-
-                // Set title
-                self.title(dataSplit[0]);
-
-                // Update sparkline data
-                if(self.speedHistory.length >= 50) {
-                    // Remove first one
-                    self.speedHistory.shift();
-                }
-                // Add
-                self.speedHistory.push(dataSplit[1]);
-
-                // Does it contain 'Paused'? Update icon!
-                self.downloadsPaused(data.indexOf(glitterTranslate.paused) > -1)
-
-                // Force the next full update to be full
-                self.history.lastUpdate = 0
-            }).always(self.setNextUpdate)
-            // Do not continue!
-            return;
-        }
-
-        /**
-            Full refresh
-        **/
         // Do requests for full information
         // Catch the fail to display message
         var queueApi = callAPI({
@@ -550,10 +516,12 @@ function ViewModel() {
         });
     })
 
-    // Clear warnings through this special URL..
+    // Clear warnings
     self.clearWarnings = function() {
-        // Activate
-        callSpecialAPI("./status/clearwarnings/").done(self.refresh)
+        callAPI({
+            mode: "warnings",
+            name: "clear"
+        }).done(self.refresh)
     }
 
     // Clear messages
@@ -629,37 +597,6 @@ function ViewModel() {
         }
     })
 
-    // Save the rest in config if global-settings
-    var saveInterfaceSettings = function(newValue) {
-        if(self.useGlobalOptions()) {
-            var interfaceSettings = {
-                "dateFormat": self.dateFormat,
-                "extraQueueColumns": self.extraQueueColumns,
-                "extraHistoryColumns": self.extraHistoryColumns,
-                "displayCompact": self.displayCompact,
-                "displayFullWidth": self.displayFullWidth,
-                "displayTabbed": self.displayTabbed,
-                "confirmDeleteQueue": self.confirmDeleteQueue,
-                "confirmDeleteHistory": self.confirmDeleteHistory
-            };
-            callAPI({
-                mode: "set_config",
-                section: "misc",
-                keyword: "interface_settings",
-                value: ko.toJSON(interfaceSettings)
-            })
-        }
-    }
-
-    self.dateFormat.subscribe(saveInterfaceSettings);
-    self.extraQueueColumns.subscribe(saveInterfaceSettings);
-    self.extraHistoryColumns.subscribe(saveInterfaceSettings);
-    self.displayCompact.subscribe(saveInterfaceSettings);
-    self.displayFullWidth.subscribe(saveInterfaceSettings);
-    self.displayTabbed.subscribe(saveInterfaceSettings);
-    self.confirmDeleteQueue.subscribe(saveInterfaceSettings);
-    self.confirmDeleteHistory.subscribe(saveInterfaceSettings);
-
     /***
          Add NZB's
     ***/
@@ -758,7 +695,7 @@ function ViewModel() {
                 // Refresh
                 self.refresh();
                 // Hide notification
-                hideNotification(true)
+                hideNotification()
                 // Reset the form
                 $('#modal-add-nzb form').trigger('reset');
                 $('#nzbname').val('')
@@ -772,14 +709,26 @@ function ViewModel() {
         // Full refresh? Only on click and for the status-screen
         var statusFullRefresh = (event != undefined) && $('#options-status').hasClass('active');
 
+        // Measure performance? Takes a while
+        var statusPerformance = (event != undefined) && $(event.currentTarget).hasClass('diskspeed-button');
+
         // Make it spin if the user requested it otherwise we don't,
         // because browsers use a lot of CPU for the animation
         if(statusFullRefresh) {
             self.hasStatusInfo(false)
         }
 
+        // Show loading text for performance measures
+        if(statusPerformance) {
+            self.hasPerformanceInfo(false)
+        }
+
         // Load the custom status info
-        callAPI({ mode: 'fullstatus', skip_dashboard: (!statusFullRefresh)*1 }).then(function(data) {
+        callAPI({
+            mode: 'status',
+            calculate_performance: statusPerformance*1,
+            skip_dashboard: (!statusFullRefresh)*1
+        }).then(function(data) {
             // Update basic
             self.statusInfo.loglevel(data.status.loglevel)
             self.statusInfo.folders(data.status.folders)
@@ -794,6 +743,7 @@ function ViewModel() {
                 self.statusInfo.completedirspeed(data.status.completedirspeed)
                 self.statusInfo.internetbandwidth(data.status.internetbandwidth)
                 self.statusInfo.dnslookup(data.status.dnslookup)
+                self.statusInfo.active_socks5_proxy(data.status.active_socks5_proxy)
                 self.statusInfo.localipv4(data.status.localipv4)
                 self.statusInfo.publicipv4(data.status.publicipv4)
                 self.statusInfo.ipv6(data.status.ipv6 || glitterTranslate.noneText)
@@ -807,8 +757,11 @@ function ViewModel() {
                 if(self.statusInfo.servers().length == 0) {
                     self.statusInfo.loglevel.subscribe(function(newValue) {
                         // Update log-level
-                        callSpecialAPI('./status/change_loglevel/', {
-                            loglevel: newValue
+                        callAPI({
+                            mode: "set_config",
+                            section: "logging",
+                            keyword: "log_level",
+                            value: newValue
                         });
                     })
                 }
@@ -858,16 +811,6 @@ function ViewModel() {
         });
     }
 
-    // Do a disk-speedtest
-    self.testDiskSpeed = function(item, event) {
-        self.hasPerformanceInfo(false)
-
-        // Run it and then display it
-        callSpecialAPI('./status/dashrefresh/').then(function() {
-            self.loadStatusInfo(true, true)
-        })
-    }
-
     // Download a test-NZB
     self.testDownload = function(data, event) {
         var nzbSize = $(event.target).data('size')
@@ -894,8 +837,10 @@ function ViewModel() {
 
     // Unblock server
     self.unblockServer = function(servername) {
-        callSpecialAPI("./status/unblock_server/", {
-            server: servername
+        callAPI({
+            mode: "status",
+            name: "unblock_server",
+            value: servername
         }).then(function() {
             $("#modal-options").modal("hide");
         })
@@ -953,7 +898,7 @@ function ViewModel() {
         $('#options-orphans [data-tooltip="true"]').tooltip('hide')
 
         // Show notification on delete
-        if($(htmlElement.currentTarget).data('action') == 'delete') {
+        if($(htmlElement.currentTarget).data('action') == 'delete_orphan') {
             showNotification('.main-notification-box-removing', 1000)
         } else {
             // Adding back to queue
@@ -961,13 +906,15 @@ function ViewModel() {
         }
 
         // Activate
-        callSpecialAPI("./status/" + $(htmlElement.currentTarget).data('action'), {
-            name: $("<div/>").html(folder).text()
+        callAPI({
+            mode: "status",
+            name: $(htmlElement.currentTarget).data('action'),
+            value: $("<div/>").html(folder).text()
         }).then(function() {
             // Refresh
             self.loadStatusInfo(true, true)
             // Hide notification
-            hideNotification(true)
+            hideNotification()
         })
     }
 
@@ -977,9 +924,12 @@ function ViewModel() {
              // Show notification
             showNotification('.main-notification-box-removing-multiple', 0, self.statusInfo.folders().length)
             // Delete them all
-            callSpecialAPI("./status/delete_all/").then(function() {
+            callAPI({
+                mode: "status",
+                name: "delete_all_orphan"
+            }).then(function() {
                 // Remove notifcation and update screen
-                hideNotification(true)
+                hideNotification()
                 self.loadStatusInfo(true, true)
             })
         }
@@ -991,9 +941,12 @@ function ViewModel() {
              // Show notification
             showNotification('.main-notification-box-sendback')
             // Delete them all
-            callSpecialAPI("./status/add_all/").then(function() {
+            callAPI({
+                mode: "status",
+                name: "add_all_orphan"
+            }).then(function() {
                 // Remove notifcation and update screen
-                hideNotification(true)
+                hideNotification()
                 self.loadStatusInfo(true, true)
             })
         }
@@ -1014,6 +967,11 @@ function ViewModel() {
         $('body').toggleClass('container-tabbed')
     })
 
+    // Change hash for page-reload
+    $('.history-queue-swicher .nav-tabs a').on('shown.bs.tab', function (e) {
+        window.location.hash = e.target.hash;
+    })
+
     /**
          SABnzb options
     **/
@@ -1029,7 +987,7 @@ function ViewModel() {
     self.restartSAB = function() {
         if(!confirm(glitterTranslate.restart)) return;
         // Call restart function
-        callSpecialAPI("./config/restart/")
+        callAPI({ mode: "restart" })
 
         // Set counter, we need at least 15 seconds
         self.isRestarting(Math.max(1, Math.floor(15 / self.refreshRate())));
@@ -1054,18 +1012,16 @@ function ViewModel() {
         if(!confirm(glitterTranslate.repair)) return;
         // Hide the modal and show the notifucation
         $("#modal-options").modal("hide");
-        showNotification('.main-notification-box-queue-repair')
+        showNotification('.main-notification-box-queue-repair', 5000)
         // Call the API
-        callSpecialAPI("./config/repair/").then(function() {
-            hideNotification(true)
-        })
+        callAPI({ mode: "restart_repair" })
     }
     // Force disconnect
     self.forceDisconnect = function() {
         // Show notification
         showNotification('.main-notification-box-disconnect', 3000)
         // Call API
-        callSpecialAPI("./status/disconnect/").then(function() {
+        callAPI({ mode: "disconnect" }).then(function() {
             $("#modal-options").modal("hide");
         })
     }
@@ -1087,6 +1043,31 @@ function ViewModel() {
     // Tabbed layout?
     if(localStorageGetItem('displayTabbed') === 'true') {
         $('body').addClass('container-tabbed')
+
+        var tab_from_hash = location.hash.replace(/^#/, '');
+        if (tab_from_hash) {
+            $('.history-queue-swicher .nav-tabs a[href="#' + tab_from_hash + '"]').tab('show');
+        }
+    }
+
+    // Save the rest in config if global-settings
+    var saveInterfaceSettings = function(newValue) {
+        var interfaceSettings = {
+            "dateFormat": self.dateFormat,
+            "extraQueueColumns": self.extraQueueColumns,
+            "extraHistoryColumns": self.extraHistoryColumns,
+            "displayCompact": self.displayCompact,
+            "displayFullWidth": self.displayFullWidth,
+            "displayTabbed": self.displayTabbed,
+            "confirmDeleteQueue": self.confirmDeleteQueue,
+            "confirmDeleteHistory": self.confirmDeleteHistory
+        };
+        callAPI({
+            mode: "set_config",
+            section: "misc",
+            keyword: "interface_settings",
+            value: ko.toJSON(interfaceSettings)
+        })
     }
 
     // Get the speed-limit, refresh rate and server names
@@ -1117,6 +1098,16 @@ function ViewModel() {
                 self.confirmDeleteQueue(interfaceSettings['confirmDeleteQueue']);
                 self.confirmDeleteHistory(interfaceSettings['confirmDeleteHistory']);
             }
+
+            // Only subscribe now to prevent collisions between localStorage and config settings updates
+            self.dateFormat.subscribe(saveInterfaceSettings);
+            self.extraQueueColumns.subscribe(saveInterfaceSettings);
+            self.extraHistoryColumns.subscribe(saveInterfaceSettings);
+            self.displayCompact.subscribe(saveInterfaceSettings);
+            self.displayFullWidth.subscribe(saveInterfaceSettings);
+            self.displayTabbed.subscribe(saveInterfaceSettings);
+            self.confirmDeleteQueue.subscribe(saveInterfaceSettings);
+            self.confirmDeleteHistory.subscribe(saveInterfaceSettings);
         }
 
         // Set bandwidth limit
@@ -1126,6 +1117,9 @@ function ViewModel() {
         // Save servers (for reporting functionality of OZnzb)
         self.servers = response.config.servers;
 
+        // Already set if we are using a proxy
+        if(response.config.misc.socks5_proxy_url) self.statusInfo.active_socks5_proxy(true)
+
         // Update message
         if(newRelease) {
             self.allMessages.push({
@@ -1241,4 +1235,4 @@ function ViewModel() {
 
     // Activate tooltips
     if(!isMobile) $('[data-tooltip="true"]').tooltip({ trigger: 'hover', container: 'body' })
-}
+}

interfaces/Glitter/templates/static/javascripts/glitter.queue.js

@@ -34,7 +34,7 @@ function QueueListModel(parent) {
     // External var's
     self.queueItems = ko.observableArray([]);
     self.totalItems = ko.observable(0);
-    self.isMultiEditing = ko.observable(false);
+    self.isMultiEditing = ko.observable(false).extend({ persist: 'queueIsMultiEditing' });
     self.isLoading = ko.observable(false).extend({ rateLimit: 100 });
     self.multiEditItems = ko.observableArray([]);
     self.categoriesList = ko.observableArray([]);
@@ -444,7 +444,7 @@ function QueueListModel(parent) {
                     // Empty it
                     self.multiEditItems.removeAll();
                     // Hide notification
-                    hideNotification(true)
+                    hideNotification()
                 }
             })
         }
@@ -531,11 +531,10 @@ function QueueModel(parent, data) {
         return self.name()
     })
     self.missingText = ko.pureComputed(function() {
-        // Check for missing data, the value is arbitrary! (1%)
-        if(self.missingMB()/self.totalMB() > 0.01) {
+        // Check for missing data, can show 0 if article-size is smaller than 500K, but we accept that
+        if(self.missingMB()) {
             return self.missingMB().toFixed(0) + ' MB ' + glitterTranslate.misingArt
         }
-        return;
     })
     self.statusText = ko.computed(function() {
         // Checking
@@ -745,7 +744,7 @@ function QueueModel(parent, data) {
                 parent.multiEditItems.remove(function(inList) { return inList.id == itemToDelete.id; })
                 self.parent.parent.refresh();
                 // Hide notifcation
-                hideNotification(true)
+                hideNotification()
             });
         }
     };

interfaces/Glitter/templates/static/stylesheets/glitter.css

@@ -23,6 +23,7 @@ h2 {
 .sparkline-container svg {
     margin: 10px 15px 8px;
     float: left;
+    cursor: pointer;
 }
 
 .main-navbar .sparkline {

interfaces/Glitter/templates/status.tmpl

@@ -1 +0,0 @@
-  

interfaces/Plush/README.txt

@@ -1,106 +0,0 @@
-
-Plush for SABnzbd 0.6.x | Feb. 21 2010
-assembled by pairofdimes - see LICENSE-CC.txt
-https://forums.sabnzbd.org contributions welcome
-
-======================
-THANKS TO CONTRIBUTORS
-
-Unmentioned imagery provided by: inpheaux, injectx, real_scud, jbw, sbultez, rAf
-
-==============
-LIBRARIES USED
-
-jQuery
-http://jquery.com
-Copyright (c) 2010 John Resig
-See LICENSE-MIT & LICENSE-GPL
-
-jQuery UI
-http://jqueryui.com/about
-Copyright (c) 2010 jQuery UI Team
-See LICENSE-MIT & LICENSE-GPL
-(includes files in templates/static/stylesheets/jqueryui/*)
-
-Sizzle CSS Selector Engine
-http://sizzlejs.com/
-Copyright (c) 2010 The Dojo Foundation
-See LICENSE-MIT, LICENSE-BSD, & LICENSE-GPL
-
-jQuery ColorBox
-http://colorpowered.com/colorbox/
-Copyright (c) 2009 Jack Moore
-See LICENSE-MIT
-
-jQuery Cookie
-http://www.stilbuero.de
-Copyright (c) 2006 Klaus Hartl
-See LICENSE-MIT & LICENSE-GPL
-
-jQuery hoverIntent
-http://cherne.net/brian/resources/jquery.hoverIntent.html
-Brian Cherne
-See LICENSE-MIT & LICENSE-GPL
-
-jQuery Live Query
-http://plugins.jquery.com/project/livequery
-Copyright (c) 2007 Brandon Aaron
-See LICENSE-MIT & LICENSE-GPL
-
-jQuery Pagination (with modifications from pairofdimes, where noted)
-http://plugins.jquery.com/project/pagination
-Author: Gabriel Birke, Describe Europe Ltd.
-See LICENSE-MIT & LICENSE-GPL
-
-jQuery Superfish
-http://users.tpg.com.au/j_birch/plugins/superfish
-Copyright (c) 2008 Joel Birch
-See LICENSE-MIT & LICENSE-GPL
-
-jQuery Table Drag & Drop
-http://www.isocra.com/2008/02/table-drag-and-drop-jquery-plugin
-Copyright (c) 2008 Denis Howlett
-See LICENSE-MIT & LICENSE-GPL
-
-WebToolkit
-http://www.webtoolkit.info/ajax-file-upload.html
-Copyright (c) 2006-2008 www.webtoolkit.info
-See LICENSE-GPL3 & LICENSE-WebToolkit
-
-www.AjaxLoad.info generated:
-templates/static/images/plush-default/loading-*.gif
-
-Nuvola Icon Set
-http://www.icon-king.com/?p=15
-Copyright (c) 2003-2004 David Vignoni
-See LICENSE-LGPL
-
-The following image is composed of graphics from the Nuvola icon set:
-templates/static/stylesheets/colorschemes/gold/images/sprite-config.png
-The above image was generated by http://spritegen.website-performance.org/
-
-templates/static/stylesheets/colorschemes/gold/images/colorbox-*.png comes from jQuery ColorBox plugin -- See LICENSE-MIT
-
-
-========================
-SPRITE GENERATION METHOD
-
-There are two sprite images, sprite-config.png and sprite-main.png, which are used to reduce the number of connections when loading Plush. Here is how to go about modifying these as easily as possible. This is oriented for the main sprite, but works the same for the config sprite.
-
-1. Extract images/plush-default-split.tar.gz
-2. Pop your new images into /plush-default-split/main/
-3. Zip up main/ (not config/)
-4. Head on over to http://spritegen.website-performance.org/
-5a. Upload the main.zip
-5b. Set Horizontal Offset & Vertical Offset to something like 150px (prevents bleeding)
-5c. Check "Compress Image with OptiPNG"
-5d. Change Class Prefix from "sprite-" to "sprite_"
-5e. Click "Create Sprite Image & CSS"
-6. You are now provided with an image and CSS
-6a. Download the image, rename to sprite-main.png, place in images/plush-default replacing what is there
-6b. Copy/paste the generated CSS definitions in the textarea, replace what is in plush-default.css
-6c. Change the generated .sprite_topright_queue position: "background-position: right" (instead of 0)
-6d. Open queue.tmpl, find <div class="sprite_progress_done", and reset "-1299px" to the new offset (from 6b)
-7. Re-archive the split folder, unix command: tar -czf plush-default-split.tar.gz plush-default-split
-7a. Make sure to remove any Thumbs.db or .DS_Store files beforehand
-8. Of course, test changes

interfaces/Plush/licenses/LICENSE-BSD.txt

@@ -1,18 +0,0 @@
-<OWNER> = Regents of the University of California
-<ORGANIZATION> = University of California, Berkeley
-<YEAR> = 1998
-
-In the original BSD license, both occurrences of the phrase "COPYRIGHT HOLDERS AND CONTRIBUTORS" in the disclaimer read "REGENTS AND CONTRIBUTORS".
-
-Here is the license template:
-
-Copyright (c) <YEAR>, <OWNER>
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
-
-    * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
-    * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
-    * Neither the name of the <ORGANIZATION> nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

interfaces/Plush/licenses/LICENSE-CC.txt

@@ -1,63 +0,0 @@
-http://creativecommons.org/licenses/by/3.0/
-http://creativecommons.org/licenses/by/3.0/legalcode
-
-License
-
-THE WORK (AS DEFINED BELOW) IS PROVIDED UNDER THE TERMS OF THIS CREATIVE COMMONS PUBLIC LICENSE ("CCPL" OR "LICENSE"). THE WORK IS PROTECTED BY COPYRIGHT AND/OR OTHER APPLICABLE LAW. ANY USE OF THE WORK OTHER THAN AS AUTHORIZED UNDER THIS LICENSE OR COPYRIGHT LAW IS PROHIBITED.
-
-BY EXERCISING ANY RIGHTS TO THE WORK PROVIDED HERE, YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS LICENSE. TO THE EXTENT THIS LICENSE MAY BE CONSIDERED TO BE A CONTRACT, THE LICENSOR GRANTS YOU THE RIGHTS CONTAINED HERE IN CONSIDERATION OF YOUR ACCEPTANCE OF SUCH TERMS AND CONDITIONS.
-
-1. Definitions
-
-   1. "Adaptation" means a work based upon the Work, or upon the Work and other pre-existing works, such as a translation, adaptation, derivative work, arrangement of music or other alterations of a literary or artistic work, or phonogram or performance and includes cinematographic adaptations or any other form in which the Work may be recast, transformed, or adapted including in any form recognizably derived from the original, except that a work that constitutes a Collection will not be considered an Adaptation for the purpose of this License. For the avoidance of doubt, where the Work is a musical work, performance or phonogram, the synchronization of the Work in timed-relation with a moving image ("synching") will be considered an Adaptation for the purpose of this License.
-   2. "Collection" means a collection of literary or artistic works, such as encyclopedias and anthologies, or performances, phonograms or broadcasts, or other works or subject matter other than works listed in Section 1(f) below, which, by reason of the selection and arrangement of their contents, constitute intellectual creations, in which the Work is included in its entirety in unmodified form along with one or more other contributions, each constituting separate and independent works in themselves, which together are assembled into a collective whole. A work that constitutes a Collection will not be considered an Adaptation (as defined above) for the purposes of this License.
-   3. "Distribute" means to make available to the public the original and copies of the Work or Adaptation, as appropriate, through sale or other transfer of ownership.
-   4. "Licensor" means the individual, individuals, entity or entities that offer(s) the Work under the terms of this License.
-   5. "Original Author" means, in the case of a literary or artistic work, the individual, individuals, entity or entities who created the Work or if no individual or entity can be identified, the publisher; and in addition (i) in the case of a performance the actors, singers, musicians, dancers, and other persons who act, sing, deliver, declaim, play in, interpret or otherwise perform literary or artistic works or expressions of folklore; (ii) in the case of a phonogram the producer being the person or legal entity who first fixes the sounds of a performance or other sounds; and, (iii) in the case of broadcasts, the organization that transmits the broadcast.
-   6. "Work" means the literary and/or artistic work offered under the terms of this License including without limitation any production in the literary, scientific and artistic domain, whatever may be the mode or form of its expression including digital form, such as a book, pamphlet and other writing; a lecture, address, sermon or other work of the same nature; a dramatic or dramatico-musical work; a choreographic work or entertainment in dumb show; a musical composition with or without words; a cinematographic work to which are assimilated works expressed by a process analogous to cinematography; a work of drawing, painting, architecture, sculpture, engraving or lithography; a photographic work to which are assimilated works expressed by a process analogous to photography; a work of applied art; an illustration, map, plan, sketch or three-dimensional work relative to geography, topography, architecture or science; a performance; a broadcast; a phonogram; a compilation of data to the extent it is protected as a copyrightable work; or a work performed by a variety or circus performer to the extent it is not otherwise considered a literary or artistic work.
-   7. "You" means an individual or entity exercising rights under this License who has not previously violated the terms of this License with respect to the Work, or who has received express permission from the Licensor to exercise rights under this License despite a previous violation.
-   8. "Publicly Perform" means to perform public recitations of the Work and to communicate to the public those public recitations, by any means or process, including by wire or wireless means or public digital performances; to make available to the public Works in such a way that members of the public may access these Works from a place and at a place individually chosen by them; to perform the Work to the public by any means or process and the communication to the public of the performances of the Work, including by public digital performance; to broadcast and rebroadcast the Work by any means including signs, sounds or images.
-   9. "Reproduce" means to make copies of the Work by any means including without limitation by sound or visual recordings and the right of fixation and reproducing fixations of the Work, including storage of a protected performance or phonogram in digital form or other electronic medium.
-
-2. Fair Dealing Rights. Nothing in this License is intended to reduce, limit, or restrict any uses free from copyright or rights arising from limitations or exceptions that are provided for in connection with the copyright protection under copyright law or other applicable laws.
-
-3. License Grant. Subject to the terms and conditions of this License, Licensor hereby grants You a worldwide, royalty-free, non-exclusive, perpetual (for the duration of the applicable copyright) license to exercise the rights in the Work as stated below:
-
-   1. to Reproduce the Work, to incorporate the Work into one or more Collections, and to Reproduce the Work as incorporated in the Collections;
-   2. to create and Reproduce Adaptations provided that any such Adaptation, including any translation in any medium, takes reasonable steps to clearly label, demarcate or otherwise identify that changes were made to the original Work. For example, a translation could be marked "The original work was translated from English to Spanish," or a modification could indicate "The original work has been modified.";
-   3. to Distribute and Publicly Perform the Work including as incorporated in Collections; and,
-   4. to Distribute and Publicly Perform Adaptations.
-   5.
-
-      For the avoidance of doubt:
-         1. Non-waivable Compulsory License Schemes. In those jurisdictions in which the right to collect royalties through any statutory or compulsory licensing scheme cannot be waived, the Licensor reserves the exclusive right to collect such royalties for any exercise by You of the rights granted under this License;
-         2. Waivable Compulsory License Schemes. In those jurisdictions in which the right to collect royalties through any statutory or compulsory licensing scheme can be waived, the Licensor waives the exclusive right to collect such royalties for any exercise by You of the rights granted under this License; and,
-         3. Voluntary License Schemes. The Licensor waives the right to collect royalties, whether individually or, in the event that the Licensor is a member of a collecting society that administers voluntary licensing schemes, via that society, from any exercise by You of the rights granted under this License.
-
-The above rights may be exercised in all media and formats whether now known or hereafter devised. The above rights include the right to make such modifications as are technically necessary to exercise the rights in other media and formats. Subject to Section 8(f), all rights not expressly granted by Licensor are hereby reserved.
-
-4. Restrictions. The license granted in Section 3 above is expressly made subject to and limited by the following restrictions:
-
-   1. You may Distribute or Publicly Perform the Work only under the terms of this License. You must include a copy of, or the Uniform Resource Identifier (URI) for, this License with every copy of the Work You Distribute or Publicly Perform. You may not offer or impose any terms on the Work that restrict the terms of this License or the ability of the recipient of the Work to exercise the rights granted to that recipient under the terms of the License. You may not sublicense the Work. You must keep intact all notices that refer to this License and to the disclaimer of warranties with every copy of the Work You Distribute or Publicly Perform. When You Distribute or Publicly Perform the Work, You may not impose any effective technological measures on the Work that restrict the ability of a recipient of the Work from You to exercise the rights granted to that recipient under the terms of the License. This Section 4(a) applies to the Work as incorporated in a Collection, but this does not require the Collection apart from the Work itself to be made subject to the terms of this License. If You create a Collection, upon notice from any Licensor You must, to the extent practicable, remove from the Collection any credit as required by Section 4(b), as requested. If You create an Adaptation, upon notice from any Licensor You must, to the extent practicable, remove from the Adaptation any credit as required by Section 4(b), as requested.
-   2. If You Distribute, or Publicly Perform the Work or any Adaptations or Collections, You must, unless a request has been made pursuant to Section 4(a), keep intact all copyright notices for the Work and provide, reasonable to the medium or means You are utilizing: (i) the name of the Original Author (or pseudonym, if applicable) if supplied, and/or if the Original Author and/or Licensor designate another party or parties (e.g., a sponsor institute, publishing entity, journal) for attribution ("Attribution Parties") in Licensor's copyright notice, terms of service or by other reasonable means, the name of such party or parties; (ii) the title of the Work if supplied; (iii) to the extent reasonably practicable, the URI, if any, that Licensor specifies to be associated with the Work, unless such URI does not refer to the copyright notice or licensing information for the Work; and (iv) , consistent with Section 3(b), in the case of an Adaptation, a credit identifying the use of the Work in the Adaptation (e.g., "French translation of the Work by Original Author," or "Screenplay based on original Work by Original Author"). The credit required by this Section 4 (b) may be implemented in any reasonable manner; provided, however, that in the case of a Adaptation or Collection, at a minimum such credit will appear, if a credit for all contributing authors of the Adaptation or Collection appears, then as part of these credits and in a manner at least as prominent as the credits for the other contributing authors. For the avoidance of doubt, You may only use the credit required by this Section for the purpose of attribution in the manner set out above and, by exercising Your rights under this License, You may not implicitly or explicitly assert or imply any connection with, sponsorship or endorsement by the Original Author, Licensor and/or Attribution Parties, as appropriate, of You or Your use of the Work, without the separate, express prior written permission of the Original Author, Licensor and/or Attribution Parties.
-   3. Except as otherwise agreed in writing by the Licensor or as may be otherwise permitted by applicable law, if You Reproduce, Distribute or Publicly Perform the Work either by itself or as part of any Adaptations or Collections, You must not distort, mutilate, modify or take other derogatory action in relation to the Work which would be prejudicial to the Original Author's honor or reputation. Licensor agrees that in those jurisdictions (e.g. Japan), in which any exercise of the right granted in Section 3(b) of this License (the right to make Adaptations) would be deemed to be a distortion, mutilation, modification or other derogatory action prejudicial to the Original Author's honor and reputation, the Licensor will waive or not assert, as appropriate, this Section, to the fullest extent permitted by the applicable national law, to enable You to reasonably exercise Your right under Section 3(b) of this License (right to make Adaptations) but not otherwise.
-
-5. Representations, Warranties and Disclaimer
-
-UNLESS OTHERWISE MUTUALLY AGREED TO BY THE PARTIES IN WRITING, LICENSOR OFFERS THE WORK AS-IS AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE WORK, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTIBILITY, FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT, OR THE ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OF ABSENCE OF ERRORS, WHETHER OR NOT DISCOVERABLE. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO SUCH EXCLUSION MAY NOT APPLY TO YOU.
-
-6. Limitation on Liability. EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE LAW, IN NO EVENT WILL LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES ARISING OUT OF THIS LICENSE OR THE USE OF THE WORK, EVEN IF LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-
-7. Termination
-
-   1. This License and the rights granted hereunder will terminate automatically upon any breach by You of the terms of this License. Individuals or entities who have received Adaptations or Collections from You under this License, however, will not have their licenses terminated provided such individuals or entities remain in full compliance with those licenses. Sections 1, 2, 5, 6, 7, and 8 will survive any termination of this License.
-   2. Subject to the above terms and conditions, the license granted here is perpetual (for the duration of the applicable copyright in the Work). Notwithstanding the above, Licensor reserves the right to release the Work under different license terms or to stop distributing the Work at any time; provided, however that any such election will not serve to withdraw this License (or any other license that has been, or is required to be, granted under the terms of this License), and this License will continue in full force and effect unless terminated as stated above.
-
-8. Miscellaneous
-
-   1. Each time You Distribute or Publicly Perform the Work or a Collection, the Licensor offers to the recipient a license to the Work on the same terms and conditions as the license granted to You under this License.
-   2. Each time You Distribute or Publicly Perform an Adaptation, Licensor offers to the recipient a license to the original Work on the same terms and conditions as the license granted to You under this License.
-   3. If any provision of this License is invalid or unenforceable under applicable law, it shall not affect the validity or enforceability of the remainder of the terms of this License, and without further action by the parties to this agreement, such provision shall be reformed to the minimum extent necessary to make such provision valid and enforceable.
-   4. No term or provision of this License shall be deemed waived and no breach consented to unless such waiver or consent shall be in writing and signed by the party to be charged with such waiver or consent.
-   5. This License constitutes the entire agreement between the parties with respect to the Work licensed here. There are no understandings, agreements or representations with respect to the Work not specified here. Licensor shall not be bound by any additional provisions that may appear in any communication from You. This License may not be modified without the mutual written agreement of the Licensor and You.
-   6. The rights granted under, and the subject matter referenced, in this License were drafted utilizing the terminology of the Berne Convention for the Protection of Literary and Artistic Works (as amended on September 28, 1979), the Rome Convention of 1961, the WIPO Copyright Treaty of 1996, the WIPO Performances and Phonograms Treaty of 1996 and the Universal Copyright Convention (as revised on July 24, 1971). These rights and subject matter take effect in the relevant jurisdiction in which the License terms are sought to be enforced according to the corresponding provisions of the implementation of those treaty provisions in the applicable national law. If the standard suite of rights granted under applicable copyright law includes additional rights not granted under this License, such additional rights are deemed to be included in the License; this License is not intended to restrict the license of any rights under applicable law.

interfaces/Plush/licenses/LICENSE-GPL.txt

@@ -1,339 +0,0 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Lesser General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	    How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License along
-    with this program; if not, write to the Free Software Foundation, Inc.,
-    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) year name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.

interfaces/Plush/licenses/LICENSE-GPL3.txt

@@ -1,674 +0,0 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The GNU General Public License is a free, copyleft license for
-software and other kinds of works.
-
-  The licenses for most software and other practical works are designed
-to take away your freedom to share and change the works.  By contrast,
-the GNU General Public License is intended to guarantee your freedom to
-share and change all versions of a program--to make sure it remains free
-software for all its users.  We, the Free Software Foundation, use the
-GNU General Public License for most of our software; it applies also to
-any other work released this way by its authors.  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-them if you wish), that you receive source code or can get it if you
-want it, that you can change the software or use pieces of it in new
-free programs, and that you know you can do these things.
-
-  To protect your rights, we need to prevent others from denying you
-these rights or asking you to surrender the rights.  Therefore, you have
-certain responsibilities if you distribute copies of the software, or if
-you modify it: responsibilities to respect the freedom of others.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must pass on to the recipients the same
-freedoms that you received.  You must make sure that they, too, receive
-or can get the source code.  And you must show them these terms so they
-know their rights.
-
-  Developers that use the GNU GPL protect your rights with two steps:
-(1) assert copyright on the software, and (2) offer you this License
-giving you legal permission to copy, distribute and/or modify it.
-
-  For the developers' and authors' protection, the GPL clearly explains
-that there is no warranty for this free software.  For both users' and
-authors' sake, the GPL requires that modified versions be marked as
-changed, so that their problems will not be attributed erroneously to
-authors of previous versions.
-
-  Some devices are designed to deny users access to install or run
-modified versions of the software inside them, although the manufacturer
-can do so.  This is fundamentally incompatible with the aim of
-protecting users' freedom to change the software.  The systematic
-pattern of such abuse occurs in the area of products for individuals to
-use, which is precisely where it is most unacceptable.  Therefore, we
-have designed this version of the GPL to prohibit the practice for those
-products.  If such problems arise substantially in other domains, we
-stand ready to extend this provision to those domains in future versions
-of the GPL, as needed to protect the freedom of users.
-
-  Finally, every program is threatened constantly by software patents.
-States should not allow patents to restrict development and use of
-software on general-purpose computers, but in those that do, we wish to
-avoid the special danger that patents applied to a free program could
-make it effectively proprietary.  To prevent this, the GPL assures that
-patents cannot be used to render the program non-free.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                       TERMS AND CONDITIONS
-
-  0. Definitions.
-
-  "This License" refers to version 3 of the GNU General Public License.
-
-  "Copyright" also means copyright-like laws that apply to other kinds of
-works, such as semiconductor masks.
-
-  "The Program" refers to any copyrightable work licensed under this
-License.  Each licensee is addressed as "you".  "Licensees" and
-"recipients" may be individuals or organizations.
-
-  To "modify" a work means to copy from or adapt all or part of the work
-in a fashion requiring copyright permission, other than the making of an
-exact copy.  The resulting work is called a "modified version" of the
-earlier work or a work "based on" the earlier work.
-
-  A "covered work" means either the unmodified Program or a work based
-on the Program.
-
-  To "propagate" a work means to do anything with it that, without
-permission, would make you directly or secondarily liable for
-infringement under applicable copyright law, except executing it on a
-computer or modifying a private copy.  Propagation includes copying,
-distribution (with or without modification), making available to the
-public, and in some countries other activities as well.
-
-  To "convey" a work means any kind of propagation that enables other
-parties to make or receive copies.  Mere interaction with a user through
-a computer network, with no transfer of a copy, is not conveying.
-
-  An interactive user interface displays "Appropriate Legal Notices"
-to the extent that it includes a convenient and prominently visible
-feature that (1) displays an appropriate copyright notice, and (2)
-tells the user that there is no warranty for the work (except to the
-extent that warranties are provided), that licensees may convey the
-work under this License, and how to view a copy of this License.  If
-the interface presents a list of user commands or options, such as a
-menu, a prominent item in the list meets this criterion.
-
-  1. Source Code.
-
-  The "source code" for a work means the preferred form of the work
-for making modifications to it.  "Object code" means any non-source
-form of a work.
-
-  A "Standard Interface" means an interface that either is an official
-standard defined by a recognized standards body, or, in the case of
-interfaces specified for a particular programming language, one that
-is widely used among developers working in that language.
-
-  The "System Libraries" of an executable work include anything, other
-than the work as a whole, that (a) is included in the normal form of
-packaging a Major Component, but which is not part of that Major
-Component, and (b) serves only to enable use of the work with that
-Major Component, or to implement a Standard Interface for which an
-implementation is available to the public in source code form.  A
-"Major Component", in this context, means a major essential component
-(kernel, window system, and so on) of the specific operating system
-(if any) on which the executable work runs, or a compiler used to
-produce the work, or an object code interpreter used to run it.
-
-  The "Corresponding Source" for a work in object code form means all
-the source code needed to generate, install, and (for an executable
-work) run the object code and to modify the work, including scripts to
-control those activities.  However, it does not include the work's
-System Libraries, or general-purpose tools or generally available free
-programs which are used unmodified in performing those activities but
-which are not part of the work.  For example, Corresponding Source
-includes interface definition files associated with source files for
-the work, and the source code for shared libraries and dynamically
-linked subprograms that the work is specifically designed to require,
-such as by intimate data communication or control flow between those
-subprograms and other parts of the work.
-
-  The Corresponding Source need not include anything that users
-can regenerate automatically from other parts of the Corresponding
-Source.
-
-  The Corresponding Source for a work in source code form is that
-same work.
-
-  2. Basic Permissions.
-
-  All rights granted under this License are granted for the term of
-copyright on the Program, and are irrevocable provided the stated
-conditions are met.  This License explicitly affirms your unlimited
-permission to run the unmodified Program.  The output from running a
-covered work is covered by this License only if the output, given its
-content, constitutes a covered work.  This License acknowledges your
-rights of fair use or other equivalent, as provided by copyright law.
-
-  You may make, run and propagate covered works that you do not
-convey, without conditions so long as your license otherwise remains
-in force.  You may convey covered works to others for the sole purpose
-of having them make modifications exclusively for you, or provide you
-with facilities for running those works, provided that you comply with
-the terms of this License in conveying all material for which you do
-not control copyright.  Those thus making or running the covered works
-for you must do so exclusively on your behalf, under your direction
-and control, on terms that prohibit them from making any copies of
-your copyrighted material outside their relationship with you.
-
-  Conveying under any other circumstances is permitted solely under
-the conditions stated below.  Sublicensing is not allowed; section 10
-makes it unnecessary.
-
-  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
-
-  No covered work shall be deemed part of an effective technological
-measure under any applicable law fulfilling obligations under article
-11 of the WIPO copyright treaty adopted on 20 December 1996, or
-similar laws prohibiting or restricting circumvention of such
-measures.
-
-  When you convey a covered work, you waive any legal power to forbid
-circumvention of technological measures to the extent such circumvention
-is effected by exercising rights under this License with respect to
-the covered work, and you disclaim any intention to limit operation or
-modification of the work as a means of enforcing, against the work's
-users, your or third parties' legal rights to forbid circumvention of
-technological measures.
-
-  4. Conveying Verbatim Copies.
-
-  You may convey verbatim copies of the Program's source code as you
-receive it, in any medium, provided that you conspicuously and
-appropriately publish on each copy an appropriate copyright notice;
-keep intact all notices stating that this License and any
-non-permissive terms added in accord with section 7 apply to the code;
-keep intact all notices of the absence of any warranty; and give all
-recipients a copy of this License along with the Program.
-
-  You may charge any price or no price for each copy that you convey,
-and you may offer support or warranty protection for a fee.
-
-  5. Conveying Modified Source Versions.
-
-  You may convey a work based on the Program, or the modifications to
-produce it from the Program, in the form of source code under the
-terms of section 4, provided that you also meet all of these conditions:
-
-    a) The work must carry prominent notices stating that you modified
-    it, and giving a relevant date.
-
-    b) The work must carry prominent notices stating that it is
-    released under this License and any conditions added under section
-    7.  This requirement modifies the requirement in section 4 to
-    "keep intact all notices".
-
-    c) You must license the entire work, as a whole, under this
-    License to anyone who comes into possession of a copy.  This
-    License will therefore apply, along with any applicable section 7
-    additional terms, to the whole of the work, and all its parts,
-    regardless of how they are packaged.  This License gives no
-    permission to license the work in any other way, but it does not
-    invalidate such permission if you have separately received it.
-
-    d) If the work has interactive user interfaces, each must display
-    Appropriate Legal Notices; however, if the Program has interactive
-    interfaces that do not display Appropriate Legal Notices, your
-    work need not make them do so.
-
-  A compilation of a covered work with other separate and independent
-works, which are not by their nature extensions of the covered work,
-and which are not combined with it such as to form a larger program,
-in or on a volume of a storage or distribution medium, is called an
-"aggregate" if the compilation and its resulting copyright are not
-used to limit the access or legal rights of the compilation's users
-beyond what the individual works permit.  Inclusion of a covered work
-in an aggregate does not cause this License to apply to the other
-parts of the aggregate.
-
-  6. Conveying Non-Source Forms.
-
-  You may convey a covered work in object code form under the terms
-of sections 4 and 5, provided that you also convey the
-machine-readable Corresponding Source under the terms of this License,
-in one of these ways:
-
-    a) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by the
-    Corresponding Source fixed on a durable physical medium
-    customarily used for software interchange.
-
-    b) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by a
-    written offer, valid for at least three years and valid for as
-    long as you offer spare parts or customer support for that product
-    model, to give anyone who possesses the object code either (1) a
-    copy of the Corresponding Source for all the software in the
-    product that is covered by this License, on a durable physical
-    medium customarily used for software interchange, for a price no
-    more than your reasonable cost of physically performing this
-    conveying of source, or (2) access to copy the
-    Corresponding Source from a network server at no charge.
-
-    c) Convey individual copies of the object code with a copy of the
-    written offer to provide the Corresponding Source.  This
-    alternative is allowed only occasionally and noncommercially, and
-    only if you received the object code with such an offer, in accord
-    with subsection 6b.
-
-    d) Convey the object code by offering access from a designated
-    place (gratis or for a charge), and offer equivalent access to the
-    Corresponding Source in the same way through the same place at no
-    further charge.  You need not require recipients to copy the
-    Corresponding Source along with the object code.  If the place to
-    copy the object code is a network server, the Corresponding Source
-    may be on a different server (operated by you or a third party)
-    that supports equivalent copying facilities, provided you maintain
-    clear directions next to the object code saying where to find the
-    Corresponding Source.  Regardless of what server hosts the
-    Corresponding Source, you remain obligated to ensure that it is
-    available for as long as needed to satisfy these requirements.
-
-    e) Convey the object code using peer-to-peer transmission, provided
-    you inform other peers where the object code and Corresponding
-    Source of the work are being offered to the general public at no
-    charge under subsection 6d.
-
-  A separable portion of the object code, whose source code is excluded
-from the Corresponding Source as a System Library, need not be
-included in conveying the object code work.
-
-  A "User Product" is either (1) a "consumer product", which means any
-tangible personal property which is normally used for personal, family,
-or household purposes, or (2) anything designed or sold for incorporation
-into a dwelling.  In determining whether a product is a consumer product,
-doubtful cases shall be resolved in favor of coverage.  For a particular
-product received by a particular user, "normally used" refers to a
-typical or common use of that class of product, regardless of the status
-of the particular user or of the way in which the particular user
-actually uses, or expects or is expected to use, the product.  A product
-is a consumer product regardless of whether the product has substantial
-commercial, industrial or non-consumer uses, unless such uses represent
-the only significant mode of use of the product.
-
-  "Installation Information" for a User Product means any methods,
-procedures, authorization keys, or other information required to install
-and execute modified versions of a covered work in that User Product from
-a modified version of its Corresponding Source.  The information must
-suffice to ensure that the continued functioning of the modified object
-code is in no case prevented or interfered with solely because
-modification has been made.
-
-  If you convey an object code work under this section in, or with, or
-specifically for use in, a User Product, and the conveying occurs as
-part of a transaction in which the right of possession and use of the
-User Product is transferred to the recipient in perpetuity or for a
-fixed term (regardless of how the transaction is characterized), the
-Corresponding Source conveyed under this section must be accompanied
-by the Installation Information.  But this requirement does not apply
-if neither you nor any third party retains the ability to install
-modified object code on the User Product (for example, the work has
-been installed in ROM).
-
-  The requirement to provide Installation Information does not include a
-requirement to continue to provide support service, warranty, or updates
-for a work that has been modified or installed by the recipient, or for
-the User Product in which it has been modified or installed.  Access to a
-network may be denied when the modification itself materially and
-adversely affects the operation of the network or violates the rules and
-protocols for communication across the network.
-
-  Corresponding Source conveyed, and Installation Information provided,
-in accord with this section must be in a format that is publicly
-documented (and with an implementation available to the public in
-source code form), and must require no special password or key for
-unpacking, reading or copying.
-
-  7. Additional Terms.
-
-  "Additional permissions" are terms that supplement the terms of this
-License by making exceptions from one or more of its conditions.
-Additional permissions that are applicable to the entire Program shall
-be treated as though they were included in this License, to the extent
-that they are valid under applicable law.  If additional permissions
-apply only to part of the Program, that part may be used separately
-under those permissions, but the entire Program remains governed by
-this License without regard to the additional permissions.
-
-  When you convey a copy of a covered work, you may at your option
-remove any additional permissions from that copy, or from any part of
-it.  (Additional permissions may be written to require their own
-removal in certain cases when you modify the work.)  You may place
-additional permissions on material, added by you to a covered work,
-for which you have or can give appropriate copyright permission.
-
-  Notwithstanding any other provision of this License, for material you
-add to a covered work, you may (if authorized by the copyright holders of
-that material) supplement the terms of this License with terms:
-
-    a) Disclaiming warranty or limiting liability differently from the
-    terms of sections 15 and 16 of this License; or
-
-    b) Requiring preservation of specified reasonable legal notices or
-    author attributions in that material or in the Appropriate Legal
-    Notices displayed by works containing it; or
-
-    c) Prohibiting misrepresentation of the origin of that material, or
-    requiring that modified versions of such material be marked in
-    reasonable ways as different from the original version; or
-
-    d) Limiting the use for publicity purposes of names of licensors or
-    authors of the material; or
-
-    e) Declining to grant rights under trademark law for use of some
-    trade names, trademarks, or service marks; or
-
-    f) Requiring indemnification of licensors and authors of that
-    material by anyone who conveys the material (or modified versions of
-    it) with contractual assumptions of liability to the recipient, for
-    any liability that these contractual assumptions directly impose on
-    those licensors and authors.
-
-  All other non-permissive additional terms are considered "further
-restrictions" within the meaning of section 10.  If the Program as you
-received it, or any part of it, contains a notice stating that it is
-governed by this License along with a term that is a further
-restriction, you may remove that term.  If a license document contains
-a further restriction but permits relicensing or conveying under this
-License, you may add to a covered work material governed by the terms
-of that license document, provided that the further restriction does
-not survive such relicensing or conveying.
-
-  If you add terms to a covered work in accord with this section, you
-must place, in the relevant source files, a statement of the
-additional terms that apply to those files, or a notice indicating
-where to find the applicable terms.
-
-  Additional terms, permissive or non-permissive, may be stated in the
-form of a separately written license, or stated as exceptions;
-the above requirements apply either way.
-
-  8. Termination.
-
-  You may not propagate or modify a covered work except as expressly
-provided under this License.  Any attempt otherwise to propagate or
-modify it is void, and will automatically terminate your rights under
-this License (including any patent licenses granted under the third
-paragraph of section 11).
-
-  However, if you cease all violation of this License, then your
-license from a particular copyright holder is reinstated (a)
-provisionally, unless and until the copyright holder explicitly and
-finally terminates your license, and (b) permanently, if the copyright
-holder fails to notify you of the violation by some reasonable means
-prior to 60 days after the cessation.
-
-  Moreover, your license from a particular copyright holder is
-reinstated permanently if the copyright holder notifies you of the
-violation by some reasonable means, this is the first time you have
-received notice of violation of this License (for any work) from that
-copyright holder, and you cure the violation prior to 30 days after
-your receipt of the notice.
-
-  Termination of your rights under this section does not terminate the
-licenses of parties who have received copies or rights from you under
-this License.  If your rights have been terminated and not permanently
-reinstated, you do not qualify to receive new licenses for the same
-material under section 10.
-
-  9. Acceptance Not Required for Having Copies.
-
-  You are not required to accept this License in order to receive or
-run a copy of the Program.  Ancillary propagation of a covered work
-occurring solely as a consequence of using peer-to-peer transmission
-to receive a copy likewise does not require acceptance.  However,
-nothing other than this License grants you permission to propagate or
-modify any covered work.  These actions infringe copyright if you do
-not accept this License.  Therefore, by modifying or propagating a
-covered work, you indicate your acceptance of this License to do so.
-
-  10. Automatic Licensing of Downstream Recipients.
-
-  Each time you convey a covered work, the recipient automatically
-receives a license from the original licensors, to run, modify and
-propagate that work, subject to this License.  You are not responsible
-for enforcing compliance by third parties with this License.
-
-  An "entity transaction" is a transaction transferring control of an
-organization, or substantially all assets of one, or subdividing an
-organization, or merging organizations.  If propagation of a covered
-work results from an entity transaction, each party to that
-transaction who receives a copy of the work also receives whatever
-licenses to the work the party's predecessor in interest had or could
-give under the previous paragraph, plus a right to possession of the
-Corresponding Source of the work from the predecessor in interest, if
-the predecessor has it or can get it with reasonable efforts.
-
-  You may not impose any further restrictions on the exercise of the
-rights granted or affirmed under this License.  For example, you may
-not impose a license fee, royalty, or other charge for exercise of
-rights granted under this License, and you may not initiate litigation
-(including a cross-claim or counterclaim in a lawsuit) alleging that
-any patent claim is infringed by making, using, selling, offering for
-sale, or importing the Program or any portion of it.
-
-  11. Patents.
-
-  A "contributor" is a copyright holder who authorizes use under this
-License of the Program or a work on which the Program is based.  The
-work thus licensed is called the contributor's "contributor version".
-
-  A contributor's "essential patent claims" are all patent claims
-owned or controlled by the contributor, whether already acquired or
-hereafter acquired, that would be infringed by some manner, permitted
-by this License, of making, using, or selling its contributor version,
-but do not include claims that would be infringed only as a
-consequence of further modification of the contributor version.  For
-purposes of this definition, "control" includes the right to grant
-patent sublicenses in a manner consistent with the requirements of
-this License.
-
-  Each contributor grants you a non-exclusive, worldwide, royalty-free
-patent license under the contributor's essential patent claims, to
-make, use, sell, offer for sale, import and otherwise run, modify and
-propagate the contents of its contributor version.
-
-  In the following three paragraphs, a "patent license" is any express
-agreement or commitment, however denominated, not to enforce a patent
-(such as an express permission to practice a patent or covenant not to
-sue for patent infringement).  To "grant" such a patent license to a
-party means to make such an agreement or commitment not to enforce a
-patent against the party.
-
-  If you convey a covered work, knowingly relying on a patent license,
-and the Corresponding Source of the work is not available for anyone
-to copy, free of charge and under the terms of this License, through a
-publicly available network server or other readily accessible means,
-then you must either (1) cause the Corresponding Source to be so
-available, or (2) arrange to deprive yourself of the benefit of the
-patent license for this particular work, or (3) arrange, in a manner
-consistent with the requirements of this License, to extend the patent
-license to downstream recipients.  "Knowingly relying" means you have
-actual knowledge that, but for the patent license, your conveying the
-covered work in a country, or your recipient's use of the covered work
-in a country, would infringe one or more identifiable patents in that
-country that you have reason to believe are valid.
-
-  If, pursuant to or in connection with a single transaction or
-arrangement, you convey, or propagate by procuring conveyance of, a
-covered work, and grant a patent license to some of the parties
-receiving the covered work authorizing them to use, propagate, modify
-or convey a specific copy of the covered work, then the patent license
-you grant is automatically extended to all recipients of the covered
-work and works based on it.
-
-  A patent license is "discriminatory" if it does not include within
-the scope of its coverage, prohibits the exercise of, or is
-conditioned on the non-exercise of one or more of the rights that are
-specifically granted under this License.  You may not convey a covered
-work if you are a party to an arrangement with a third party that is
-in the business of distributing software, under which you make payment
-to the third party based on the extent of your activity of conveying
-the work, and under which the third party grants, to any of the
-parties who would receive the covered work from you, a discriminatory
-patent license (a) in connection with copies of the covered work
-conveyed by you (or copies made from those copies), or (b) primarily
-for and in connection with specific products or compilations that
-contain the covered work, unless you entered into that arrangement,
-or that patent license was granted, prior to 28 March 2007.
-
-  Nothing in this License shall be construed as excluding or limiting
-any implied license or other defenses to infringement that may
-otherwise be available to you under applicable patent law.
-
-  12. No Surrender of Others' Freedom.
-
-  If conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot convey a
-covered work so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you may
-not convey it at all.  For example, if you agree to terms that obligate you
-to collect a royalty for further conveying from those to whom you convey
-the Program, the only way you could satisfy both those terms and this
-License would be to refrain entirely from conveying the Program.
-
-  13. Use with the GNU Affero General Public License.
-
-  Notwithstanding any other provision of this License, you have
-permission to link or combine any covered work with a work licensed
-under version 3 of the GNU Affero General Public License into a single
-combined work, and to convey the resulting work.  The terms of this
-License will continue to apply to the part which is the covered work,
-but the special requirements of the GNU Affero General Public License,
-section 13, concerning interaction through a network will apply to the
-combination as such.
-
-  14. Revised Versions of this License.
-
-  The Free Software Foundation may publish revised and/or new versions of
-the GNU General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-  Each version is given a distinguishing version number.  If the
-Program specifies that a certain numbered version of the GNU General
-Public License "or any later version" applies to it, you have the
-option of following the terms and conditions either of that numbered
-version or of any later version published by the Free Software
-Foundation.  If the Program does not specify a version number of the
-GNU General Public License, you may choose any version ever published
-by the Free Software Foundation.
-
-  If the Program specifies that a proxy can decide which future
-versions of the GNU General Public License can be used, that proxy's
-public statement of acceptance of a version permanently authorizes you
-to choose that version for the Program.
-
-  Later license versions may give you additional or different
-permissions.  However, no additional obligations are imposed on any
-author or copyright holder as a result of your choosing to follow a
-later version.
-
-  15. Disclaimer of Warranty.
-
-  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
-APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
-HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
-OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
-THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
-IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
-ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. Limitation of Liability.
-
-  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
-THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
-GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
-USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
-DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
-PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
-EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGES.
-
-  17. Interpretation of Sections 15 and 16.
-
-  If the disclaimer of warranty and limitation of liability provided
-above cannot be given local legal effect according to their terms,
-reviewing courts shall apply local law that most closely approximates
-an absolute waiver of all civil liability in connection with the
-Program, unless a warranty or assumption of liability accompanies a
-copy of the Program in return for a fee.
-
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-state the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software: you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-Also add information on how to contact you by electronic and paper mail.
-
-  If the program does terminal interaction, make it output a short
-notice like this when it starts in an interactive mode:
-
-    <program>  Copyright (C) <year>  <name of author>
-    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, your program's commands
-might be different; for a GUI interface, you would use an "about box".
-
-  You should also get your employer (if you work as a programmer) or school,
-if any, to sign a "copyright disclaimer" for the program, if necessary.
-For more information on this, and how to apply and follow the GNU GPL, see
-<http://www.gnu.org/licenses/>.
-
-  The GNU General Public License does not permit incorporating your program
-into proprietary programs.  If your program is a subroutine library, you
-may consider it more useful to permit linking proprietary applications with
-the library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.  But first, please read
-<http://www.gnu.org/philosophy/why-not-lgpl.html>.

interfaces/Plush/licenses/LICENSE-LGPL.txt

@@ -1,502 +0,0 @@
-      GNU LESSER GENERAL PUBLIC LICENSE
-           Version 2.1, February 1999
-
- Copyright (C) 1991, 1999 Free Software Foundation, Inc.
-     51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-[This is the first released version of the Lesser GPL.  It also counts
- as the successor of the GNU Library Public License, version 2, hence
- the version number 2.1.]
-
-          Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-
-  This license, the Lesser General Public License, applies to some
-specially designated software packages--typically libraries--of the
-Free Software Foundation and other authors who decide to use it.  You
-can use it too, but we suggest you first think carefully about whether
-this license or the ordinary General Public License is the better
-strategy to use in any particular case, based on the explanations below.
-
-  When we speak of free software, we are referring to freedom of use,
-not price.  Our General Public Licenses are designed to make sure that
-you have the freedom to distribute copies of free software (and charge
-for this service if you wish); that you receive source code or can get
-it if you want it; that you can change the software and use pieces of
-it in new free programs; and that you are informed that you can do
-these things.
-
-  To protect your rights, we need to make restrictions that forbid
-distributors to deny you these rights or to ask you to surrender these
-rights.  These restrictions translate to certain responsibilities for
-you if you distribute copies of the library or if you modify it.
-
-  For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you.  You must make sure that they, too, receive or can get the source
-code.  If you link other code with the library, you must provide
-complete object files to the recipients, so that they can relink them
-with the library after making changes to the library and recompiling
-it.  And you must show them these terms so they know their rights.
-
-  We protect your rights with a two-step method: (1) we copyright the
-library, and (2) we offer you this license, which gives you legal
-permission to copy, distribute and/or modify the library.
-
-  To protect each distributor, we want to make it very clear that
-there is no warranty for the free library.  Also, if the library is
-modified by someone else and passed on, the recipients should know
-that what they have is not the original version, so that the original
-author's reputation will not be affected by problems that might be
-introduced by others.
-
-  Finally, software patents pose a constant threat to the existence of
-any free program.  We wish to make sure that a company cannot
-effectively restrict the users of a free program by obtaining a
-restrictive license from a patent holder.  Therefore, we insist that
-any patent license obtained for a version of the library must be
-consistent with the full freedom of use specified in this license.
-
-  Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License.  This license, the GNU Lesser
-General Public License, applies to certain designated libraries, and
-is quite different from the ordinary General Public License.  We use
-this license for certain libraries in order to permit linking those
-libraries into non-free programs.
-
-  When a program is linked with a library, whether statically or using
-a shared library, the combination of the two is legally speaking a
-combined work, a derivative of the original library.  The ordinary
-General Public License therefore permits such linking only if the
-entire combination fits its criteria of freedom.  The Lesser General
-Public License permits more lax criteria for linking other code with
-the library.
-
-  We call this license the "Lesser" General Public License because it
-does Less to protect the user's freedom than the ordinary General
-Public License.  It also provides other free software developers Less
-of an advantage over competing non-free programs.  These disadvantages
-are the reason we use the ordinary General Public License for many
-libraries.  However, the Lesser license provides advantages in certain
-special circumstances.
-
-  For example, on rare occasions, there may be a special need to
-encourage the widest possible use of a certain library, so that it becomes
-a de-facto standard.  To achieve this, non-free programs must be
-allowed to use the library.  A more frequent case is that a free
-library does the same job as widely used non-free libraries.  In this
-case, there is little to gain by limiting the free library to free
-software only, so we use the Lesser General Public License.
-
-  In other cases, permission to use a particular library in non-free
-programs enables a greater number of people to use a large body of
-free software.  For example, permission to use the GNU C Library in
-non-free programs enables many more people to use the whole GNU
-operating system, as well as its variant, the GNU/Linux operating
-system.
-
-  Although the Lesser General Public License is Less protective of the
-users' freedom, it does ensure that the user of a program that is
-linked with the Library has the freedom and the wherewithal to run
-that program using a modified version of the Library.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.  Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library".  The
-former contains code derived from the library, whereas the latter must
-be combined with the library in order to run.
-
-      GNU LESSER GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License Agreement applies to any software library or other
-program which contains a notice placed by the copyright holder or
-other authorized party saying it may be distributed under the terms of
-this Lesser General Public License (also called "this License").
-Each licensee is addressed as "you".
-
-  A "library" means a collection of software functions and/or data
-prepared so as to be conveniently linked with application programs
-(which use some of those functions and data) to form executables.
-
-  The "Library", below, refers to any such software library or work
-which has been distributed under these terms.  A "work based on the
-Library" means either the Library or any derivative work under
-copyright law: that is to say, a work containing the Library or a
-portion of it, either verbatim or with modifications and/or translated
-straightforwardly into another language.  (Hereinafter, translation is
-included without limitation in the term "modification".)
-
-  "Source code" for a work means the preferred form of the work for
-making modifications to it.  For a library, complete source code means
-all the source code for all modules it contains, plus any associated
-interface definition files, plus the scripts used to control compilation
-and installation of the library.
-
-  Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running a program using the Library is not restricted, and output from
-such a program is covered only if its contents constitute a work based
-on the Library (independent of the use of the Library in a tool for
-writing it).  Whether that is true depends on what the Library does
-and what the program that uses the Library does.
-
-  1. You may copy and distribute verbatim copies of the Library's
-complete source code as you receive it, in any medium, provided that
-you conspicuously and appropriately publish on each copy an
-appropriate copyright notice and disclaimer of warranty; keep intact
-all the notices that refer to this License and to the absence of any
-warranty; and distribute a copy of this License along with the
-Library.
-
-  You may charge a fee for the physical act of transferring a copy,
-and you may at your option offer warranty protection in exchange for a
-fee.
-
-  2. You may modify your copy or copies of the Library or any portion
-of it, thus forming a work based on the Library, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) The modified work must itself be a software library.
-
-    b) You must cause the files modified to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    c) You must cause the whole of the work to be licensed at no
-    charge to all third parties under the terms of this License.
-
-    d) If a facility in the modified Library refers to a function or a
-    table of data to be supplied by an application program that uses
-    the facility, other than as an argument passed when the facility
-    is invoked, then you must make a good faith effort to ensure that,
-    in the event an application does not supply such function or
-    table, the facility still operates, and performs whatever part of
-    its purpose remains meaningful.
-
-    (For example, a function in a library to compute square roots has
-    a purpose that is entirely well-defined independent of the
-    application.  Therefore, Subsection 2d requires that any
-    application-supplied function or table used by this function must
-    be optional: if the application does not supply it, the square
-    root function must still compute square roots.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Library,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Library, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote
-it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Library.
-
-In addition, mere aggregation of another work not based on the Library
-with the Library (or with a work based on the Library) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may opt to apply the terms of the ordinary GNU General Public
-License instead of this License to a given copy of the Library.  To do
-this, you must alter all the notices that refer to this License, so
-that they refer to the ordinary GNU General Public License, version 2,
-instead of to this License.  (If a newer version than version 2 of the
-ordinary GNU General Public License has appeared, then you can specify
-that version instead if you wish.)  Do not make any other change in
-these notices.
-
-  Once this change is made in a given copy, it is irreversible for
-that copy, so the ordinary GNU General Public License applies to all
-subsequent copies and derivative works made from that copy.
-
-  This option is useful when you wish to copy part of the code of
-the Library into a program that is not a library.
-
-  4. You may copy and distribute the Library (or a portion or
-derivative of it, under Section 2) in object code or executable form
-under the terms of Sections 1 and 2 above provided that you accompany
-it with the complete corresponding machine-readable source code, which
-must be distributed under the terms of Sections 1 and 2 above on a
-medium customarily used for software interchange.
-
-  If distribution of object code is made by offering access to copy
-from a designated place, then offering equivalent access to copy the
-source code from the same place satisfies the requirement to
-distribute the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  5. A program that contains no derivative of any portion of the
-Library, but is designed to work with the Library by being compiled or
-linked with it, is called a "work that uses the Library".  Such a
-work, in isolation, is not a derivative work of the Library, and
-therefore falls outside the scope of this License.
-
-  However, linking a "work that uses the Library" with the Library
-creates an executable that is a derivative of the Library (because it
-contains portions of the Library), rather than a "work that uses the
-library".  The executable is therefore covered by this License.
-Section 6 states terms for distribution of such executables.
-
-  When a "work that uses the Library" uses material from a header file
-that is part of the Library, the object code for the work may be a
-derivative work of the Library even though the source code is not.
-Whether this is true is especially significant if the work can be
-linked without the Library, or if the work is itself a library.  The
-threshold for this to be true is not precisely defined by law.
-
-  If such an object file uses only numerical parameters, data
-structure layouts and accessors, and small macros and small inline
-functions (ten lines or less in length), then the use of the object
-file is unrestricted, regardless of whether it is legally a derivative
-work.  (Executables containing this object code plus portions of the
-Library will still fall under Section 6.)
-
-  Otherwise, if the work is a derivative of the Library, you may
-distribute the object code for the work under the terms of Section 6.
-Any executables containing that work also fall under Section 6,
-whether or not they are linked directly with the Library itself.
-
-  6. As an exception to the Sections above, you may also combine or
-link a "work that uses the Library" with the Library to produce a
-work containing portions of the Library, and distribute that work
-under terms of your choice, provided that the terms permit
-modification of the work for the customer's own use and reverse
-engineering for debugging such modifications.
-
-  You must give prominent notice with each copy of the work that the
-Library is used in it and that the Library and its use are covered by
-this License.  You must supply a copy of this License.  If the work
-during execution displays copyright notices, you must include the
-copyright notice for the Library among them, as well as a reference
-directing the user to the copy of this License.  Also, you must do one
-of these things:
-
-    a) Accompany the work with the complete corresponding
-    machine-readable source code for the Library including whatever
-    changes were used in the work (which must be distributed under
-    Sections 1 and 2 above); and, if the work is an executable linked
-    with the Library, with the complete machine-readable "work that
-    uses the Library", as object code and/or source code, so that the
-    user can modify the Library and then relink to produce a modified
-    executable containing the modified Library.  (It is understood
-    that the user who changes the contents of definitions files in the
-    Library will not necessarily be able to recompile the application
-    to use the modified definitions.)
-
-    b) Use a suitable shared library mechanism for linking with the
-    Library.  A suitable mechanism is one that (1) uses at run time a
-    copy of the library already present on the user's computer system,
-    rather than copying library functions into the executable, and (2)
-    will operate properly with a modified version of the library, if
-    the user installs one, as long as the modified version is
-    interface-compatible with the version that the work was made with.
-
-    c) Accompany the work with a written offer, valid for at
-    least three years, to give the same user the materials
-    specified in Subsection 6a, above, for a charge no more
-    than the cost of performing this distribution.
-
-    d) If distribution of the work is made by offering access to copy
-    from a designated place, offer equivalent access to copy the above
-    specified materials from the same place.
-
-    e) Verify that the user has already received a copy of these
-    materials or that you have already sent this user a copy.
-
-  For an executable, the required form of the "work that uses the
-Library" must include any data and utility programs needed for
-reproducing the executable from it.  However, as a special exception,
-the materials to be distributed need not include anything that is
-normally distributed (in either source or binary form) with the major
-components (compiler, kernel, and so on) of the operating system on
-which the executable runs, unless that component itself accompanies
-the executable.
-
-  It may happen that this requirement contradicts the license
-restrictions of other proprietary libraries that do not normally
-accompany the operating system.  Such a contradiction means you cannot
-use both them and the Library together in an executable that you
-distribute.
-
-  7. You may place library facilities that are a work based on the
-Library side-by-side in a single library together with other library
-facilities not covered by this License, and distribute such a combined
-library, provided that the separate distribution of the work based on
-the Library and of the other library facilities is otherwise
-permitted, and provided that you do these two things:
-
-    a) Accompany the combined library with a copy of the same work
-    based on the Library, uncombined with any other library
-    facilities.  This must be distributed under the terms of the
-    Sections above.
-
-    b) Give prominent notice with the combined library of the fact
-    that part of it is a work based on the Library, and explaining
-    where to find the accompanying uncombined form of the same work.
-
-  8. You may not copy, modify, sublicense, link with, or distribute
-the Library except as expressly provided under this License.  Any
-attempt otherwise to copy, modify, sublicense, link with, or
-distribute the Library is void, and will automatically terminate your
-rights under this License.  However, parties who have received copies,
-or rights, from you under this License will not have their licenses
-terminated so long as such parties remain in full compliance.
-
-  9. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Library or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Library (or any work based on the
-Library), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Library or works based on it.
-
-  10. Each time you redistribute the Library (or any work based on the
-Library), the recipient automatically receives a license from the
-original licensor to copy, distribute, link with or modify the Library
-subject to these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties with
-this License.
-
-  11. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Library at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Library by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Library.
-
-If any portion of this section is held invalid or unenforceable under any
-particular circumstance, the balance of the section is intended to apply,
-and the section as a whole is intended to apply in other circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  12. If the distribution and/or use of the Library is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Library under this License may add
-an explicit geographical distribution limitation excluding those countries,
-so that distribution is permitted only in or among countries not thus
-excluded.  In such case, this License incorporates the limitation as if
-written in the body of this License.
-
-  13. The Free Software Foundation may publish revised and/or new
-versions of the Lesser General Public License from time to time.
-Such new versions will be similar in spirit to the present version,
-but may differ in detail to address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Library
-specifies a version number of this License which applies to it and
-"any later version", you have the option of following the terms and
-conditions either of that version or of any later version published by
-the Free Software Foundation.  If the Library does not specify a
-license version number, you may choose any version ever published by
-the Free Software Foundation.
-
-  14. If you wish to incorporate parts of the Library into other free
-programs whose distribution conditions are incompatible with these,
-write to the author to ask for permission.  For software which is
-copyrighted by the Free Software Foundation, write to the Free
-Software Foundation; we sometimes make exceptions for this.  Our
-decision will be guided by the two goals of preserving the free status
-of all derivatives of our free software and of promoting the sharing
-and reuse of software generally.
-
-          NO WARRANTY
-
-  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
-EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
-OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
-KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
-LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
-THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
-AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
-FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
-RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
-FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
-SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
-DAMAGES.
-
-         END OF TERMS AND CONDITIONS
-
-           How to Apply These Terms to Your New Libraries
-
-  If you develop a new library, and you want it to be of the greatest
-possible use to the public, we recommend making it free software that
-everyone can redistribute and change.  You can do so by permitting
-redistribution under these terms (or, alternatively, under the terms of the
-ordinary General Public License).
-
-  To apply these terms, attach the following notices to the library.  It is
-safest to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least the
-"copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the library's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This library is free software; you can redistribute it and/or
-    modify it under the terms of the GNU Lesser General Public
-    License as published by the Free Software Foundation; either
-    version 2.1 of the License, or (at your option) any later version.
-
-    This library is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-    Lesser General Public License for more details.
-
-    You should have received a copy of the GNU Lesser General Public
-    License along with this library; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
-
-Also add information on how to contact you by electronic and paper mail.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the library, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the
-  library `Frob' (a library for tweaking knobs) written by James Random Hacker.
-
-  <signature of Ty Coon>, 1 April 1990
-  Ty Coon, President of Vice
-
-That's all there is to it!

interfaces/Plush/licenses/LICENSE-MIT.txt

@@ -1,21 +0,0 @@
-The MIT License
-
-Copyright (c) <year> <copyright holders>
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-THE SOFTWARE.

interfaces/Plush/licenses/LICENSE-WebToolkit.txt

@@ -1,11 +0,0 @@
-
-The module webtoolkit.aim.js is extracted from this source:
-http://www.webtoolkit.info/demo/javascript/aim/webtoolkit.aim.js
-
-The module does not include an explicit license.
-In a private communication the author has told us that we can
-assume the GPL3 license.
-
-The home of the module is:
-    http://www.webtoolkit.info/ajax-file-upload.html
-

interfaces/Plush/templates/_inc_footer.tmpl

@@ -1,18 +0,0 @@
-#if $pane=="Main"#
-<!-- start Main footer-->
-#else if $pane=="Nzo"
-<!-- start Nzo footer -->
-#else#
-<!-- start other footer -->
-  #if $pane!="Status" and $pane !="RSS"#</div>#end if#
-    </div>
-    <div class="clearfix"></div>
-  </div>
-</div>
-#end if#
-
-#include $webdir + "/_inc_modals.tmpl"#
-
-</div> <!-- close for the master-width div -->
-</body>
-</html>

interfaces/Plush/templates/_inc_header.tmpl

@@ -1,124 +0,0 @@
-#if $pane=="Status" or $pane=="Config"#
-  #set global $path = '../'#
-#else if $pane=="Main"#
-  #set global $path = ''#
-#else#
-  #set global $path = '../../'#
-#end if#
-
-<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
-<html>
-<head>
-  <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
-  <title>SABnzbd $version</title>
-  <link rel="alternate" type="application/rss+xml" title="RSS 2.0" href="${path}rss?mode=history"/>
-
-  <link rel="stylesheet" type="text/css" href="${path}static/stylesheets/jqueryui/overcast/jquery-ui-1.8.15.custom.css?$version"/>
-  <link rel="stylesheet" type="text/css" href="${path}static/stylesheets/rateit/rateit.css"/>
-  <link rel="shortcut icon" type="image/ico" href="${path}staticcfg/ico/favicon.ico?v=1.1.0"/>
-  #if $color_scheme#
-  <link rel="stylesheet" type="text/css" href="${path}static/stylesheets/colorschemes/$color_scheme/${color_scheme}.css?$version"/>
-  #else#
-  <link rel="stylesheet" type="text/css" href="${path}static/stylesheets/colorschemes/gold/gold.css?$version"/>
-  #end if#
-
-  <meta name="apple-mobile-web-app-title" content="SABnzbd" />
-  <link rel="apple-touch-icon" sizes="76x76" href="${path}staticcfg/ico/apple-touch-icon-76x76-precomposed.png" />
-  <link rel="apple-touch-icon" sizes="120x120" href="${path}staticcfg/ico/apple-touch-icon-120x120-precomposed.png" />
-  <link rel="apple-touch-icon" sizes="152x152" href="${path}staticcfg/ico/apple-touch-icon-152x152-precomposed.png" />
-  <link rel="apple-touch-icon" sizes="180x180" href="${path}staticcfg/ico/apple-touch-icon-180x180-precomposed.png" />
-  <link rel="apple-touch-icon" sizes="192x192" href="${path}staticcfg/ico/android-192x192.png" />
-  <link rel="mask-icon" href="${path}staticcfg/ico/safari-pinned-tab.svg" color="#383F45">
-
-  <script type="text/javascript" src="${path}static/javascripts/lib.js?$version"></script>
-
-#if $pane=="Main"#
-  <script type="text/javascript" src="${path}static/javascripts/plush.js?$version"></script>
-  <script type="text/javascript">
-    jQuery(function($){
-      $.plush.apikey = "$apikey";
-      $.plush.Tprev = "$T('Plush-prev')"; // translations for pagination
-      $.plush.Tnext = "$T('Plush-next')";
-      $.plush.Tconfirmation = "$T('Plush-confirm')";
-      $.plush.TconfirmPurgeH = "$T('Plush-confirmPurgeH')";
-    $.plush.Init();   // Initialize Plush UI
-    $.plush.Refresh();  // Initiate Plush refresh cycle
-  });
-  </script>
-#else if $pane=="Nzo"#
-  <script type="text/javascript" src="${path}static/javascripts/config.js?$version"></script>
-  <script type="text/javascript">
-    var config_pane = "NZO"; // re-uses config's js/css
-      var confirmWithoutSavingPrompt = "$T('Plush-confirmWithoutSavingPrompt')";
-  </script>
-  <script type="text/javascript" src="${path}static/javascripts/plush.js?$version"></script>
-  <script type="text/javascript">
-    jQuery(function($){
-      $.plush.apikey = "$apikey";
-      $.plush.Tprev = "$T('Plush-prev')"; // translations for pagination
-      $.plush.Tnext = "$T('Plush-next')";
-      $.plush.Tconfirmation = "$T('Plush-confirm')";
-      $.plush.TconfirmPurgeH = "$T('Plush-confirmPurgeH')";
-    $.plush.Init();   // Initialize Plush UI
-    $.plush.Refresh();  // Initiate Plush refresh cycle
-  });
-  </script>
-#else#
-  <script type="text/javascript" src="${path}static/javascripts/config.js?$version"></script>
-  <script type="text/javascript">
-    var config_pane = "$pane";
-    var help_uri = "$help_uri";
-    var apikey = "$apikey";
-    var confirmWithoutSavingPrompt = "$T('Plush-confirmWithoutSavingPrompt')";
-  </script>
-#end if#
-
-</head>
-<body#if $pane=="Nzo"# class="nzo"#else if $pane!="Main"# class="config_body"#end if#>
-<div id="master-width">
-  <div class="wrapper">
-    <div id="topmenu_bar" style="display:none">
-      <div class="navigation">
-        <ul class="menu" id="navigation_menu_right">
-        #if $pane=="Main"#
-          <li class="first"><a href="#" id="add_nzb"><span class="icon_nav_addnzb">$T('Plush-addnzb')</span></a></li>
-          <li><a href="#" id="manual_refresh_wrapper"><span class="icon_nav_refresh">$T('Plush-button-refresh')</span></a></li>
-          <li><a href="#" id="plush_options"><span class="icon_nav_options">$T('Plush-options')</span></a></li>
-          <li class="last"><a href="#" id="help" target="_blank"><span class="icon_nav_help">$T('menu-help').capitalize()</span></a></li>
-        #else#
-          <li class="first last"><a href="#" id="help" target="_blank"><span class="icon_nav_help">$T('menu-help').capitalize()</span></a></li>
-        #end if#
-        </ul>
-        <ul class="menu" id="navigation_menu_left">
-          <li#if $pane=="Main"# class="active first"#else# class="first"#end if#><a href="${path}"><span class="icon_nav_download">#include $webdir + "/../../Config/templates/staticcfg/images/logo-arrow.svg"# $T('Plush-downloads').capitalize()</span></a></li>
-          <li#if $pane=="Status"# class="active"#end if#><a href="${path}status/"><span class="icon_nav_connections">$T('menu-cons').capitalize()</span></a></li>
-          <li#if $pane=="RSS"# class="active"#end if#><a href="${path}config/rss/"><span class="icon_nav_rss">$T('rss').upper()</span></a></li>
-          <li#if $pane!="RSS" and $pane!="Nzo" and ($pane=="Config" or $path=='../../')# class="active last"#else# class="last"#end if#><a href="${path}config/"><span class="icon_nav_config">$T('menu-config').capitalize()</span></a></li>
-        </ul>
-      </div>
-      <div id="nav_text_right">
-        #if $loadavg#$T('ft-sysload'):&nbsp;<span id="loadavg">$loadavg</span>#end if#
-      </div>
-      <div id="nav_text_left">
-        <span id="warning_box"><b><a href="${path}status/#tabs-warnings" id="last_warning"><span id="have_warnings">$have_warnings</span> $T('warnings')</a></b></span>
-        #if $pane=="Main"#
-          #if $new_release#&sdot; <a href="$new_rel_url" id="new_release" target="_blank">$T('Plush-updateAvailable').replace(' ','&nbsp;')</a>#end if#
-        <a href="${path}config/general/#web_dir"><strong style="color: red">This skin will be removed in SABnzbd 3.4.0! <br>We recommend using the Glitter skin.</strong></a>
-        #end if#
-      </div>
-    </div>
-  </div>
-
-  <noscript><h1 align="center">$T('Plush-enableJavascript')</h1></noscript>
-
-#if $pane=="Main"#
-#else if $pane=="Nzo"#
-#else if $pane=="Status" or $pane =="RSS"#
-  <div id="config_container" class="config_margin_status lang-$active_lang">
-    <div id="config_content">
-#else#
-  <div id="config_container" class="config_margin">
-    <div id="config_content">
-      <div id="config">
-        <div id="config-content" class="clearfix">
-#end if#

interfaces/Plush/templates/_inc_modals.tmpl

@@ -1,217 +0,0 @@
-  <script type="text/javascript">
-    function expired_host_changed(self) {
-      var host = document.getElementsByName('expired_host')[0];
-      host.value = self.value;
-      host.readOnly = self.value.length > 0;
-    }
-    function flag_modal_submit(self) {
-      var radios = document.getElementsByName('rating_flag');
-      for (var i = 0; i < radios.length; i++) {
-        if (radios[i].checked) {
-          document.getElementById('noopt').setAttribute('style', 'display:none;size:1');
-          document.getElementById('submitbtn').click();
-          return;
-        }
-      }
-      document.getElementById('noopt').removeAttribute('style');
-    }
-  </script>
-
-  <!-- modals -->
-  <div style='display:none'>
-
-  <div id="help_modal">
-    <table>
-      <tr><td><strong>$T('menu-wiki'):</strong></td><td><a href="$helpuri$help_uri" target="_blank">$helpuri$help_uri</a></td></tr>
-      <tr><td><strong>$T('menu-forums'):</strong></td><td><a href="https://forums.sabnzbd.org/" target="_blank">https://forums.sabnzbd.org/</a></td></tr>
-      <tr><td><strong>$T('menu-irc'):</strong></td><td><a href="https://sabnzbd.org/live-chat.html" target="_blank">https://sabnzbd.org/live-chat.html</a></td></tr>
-    </table>
-    <div class="sabnzbd_logo main_sprite_container sprite_sabnzbdplus_logo"></div>
-    <p><strong>SABnzbd $T('version'):</strong> $version</p>
-    <p><small>Copyright (C) 2008-2021 The SABnzbd Team &lt;team@sabnzbd.org&gt;</small></p>
-    <p><small>$T('yourRights')</small></p>
-  </div>
-
-  <div id="plush_options_modal">
-
-  <p><a href="status/disconnect?apikey=$apikey" class="juiButton">$T('link-forceDisc')</a></p>
-  <p><a href="config/restart?apikey=$apikey" class="juiButton" id="sabnzbd_restart" rel="#echo $T('explain-Restart').replace("<br />","\n")#">$T('sch-restart')</a>
-    <a href="shutdown?apikey=$apikey&amp;pid=$pid" class="juiButton" id="sabnzbd_shutdown" rel="$T('shutdownOK?')">$T('sch-shutdown')</a></p>
-  <br/>
-
-  $T('Plush-refreshRate'):
-<select id="refreshRate-option">
-  <option value="1">1 $T('second')</option>
-  <option value="2">2 $T('second')</option>
-  <option value="4">4 $T('second')</option>
-  <option value="8">8 $T('second')</option>
-  <option value="16">16 $T('second')</option>
-  <option value="30">30 $T('second')</option>
-  <option value="60">1 $T('minute')</option>
-  <option value="120">2 $T('minute')</option>
-  <option value="900">15 $T('minute')</option>
-  <option value="1800">30 $T('minute')</option>
-  <option value="0">$T('Plush-disabled')</option>
-</select><br/><br/>
-$T('Plush-containerWidth'):
-<select id="containerWidth-option">
-  <option value="100%">100%</option>
-  <option value="90%">90%</option>
-  <option value="80%">80%</option>
-  <option value="70%">70%</option>
-  <option value="60%">60%</option>
-  <option value="50%">50%</option>
-  <option value="40%">40%</option>
-</select><br/><br/>
-<!-- <input type="checkbox" id="confirmDeleteQueue" checked="checked" /> $T("Plush-confirmDeleteQueue")<br/><br/>
-<input type="checkbox" id="confirmDeleteHistory" checked="checked" /> $T("Plush-confirmDeleteHistory")<br/><br/> -->
-<span id="explain-blockRefresh" title="$T("Plush-explain-blockRefresh")"><input type="checkbox" id="blockRefresh" checked="checked" /> $T("Plush-blockRefresh")</span>
-</div>
-
-#if $pane=="Main"#
-
-  <div id="add_nzb_modal">
-    <input type="text" id="addID_input" size="31" />
-    <input type="submit" id="addID" value="$T('Plush-fetch')" class="juiButton" />
-    <div id="add_nzb_hr"><hr></div>
-    <form action="api" id="uploadNZBForm" method="post" enctype="multipart/form-data">
-      <input type="hidden" name="apikey" value="$apikey" />
-        <input type="hidden" name="mode" value="addfile" />
-        <input type="file" id="uploadNZBFile" name="name" size="12" style="width:180px;" />
-      <input type="submit" value="$T('Plush-upload')" class="juiButton" />
-      <span id="uploadingSpinner" class="loading" style="display:none">&nbsp;</span>
-      <br/><i>$T('Plush-uploadTip')</i>
-    <div id="add_nzb_hr"><hr></div>
-      <i>$T('pp'):</i>
-      <table id="add_nzb_pp">
-        #if $categories#
-        <tr><td style="text-align:right">$T('category'):</td>
-          <td><select id="addID_cat" name="cat">
-            #for $ct in $categories#
-            <option value="$ct">$Tspec($ct)</option>
-            #end for#
-            </select>
-        </td></tr>
-        #end if#
-        <tr><td style="text-align:right">$T('priority'):</td>
-          <td><select id="addID_priority" name="priority">
-            <option value="-100" selected="selected">$T('default')</option>
-            <option value="2">$T('pr-force')</option>
-            <option value="1">$T('pr-high')</option>
-            <option value="0">$T('pr-normal')</option>
-            <option value="-1">$T('pr-low')</option>
-            </select>
-        </td></tr>
-        <tr><td style="text-align:right">$T('pp'):</td>
-          <td><select id="addID_pp" name="pp">
-            <option value="-1">$T('default')</option>
-            <option value="0">$T('pp-none')</option>
-            <option value="1">$T('pp-repair')</option>
-            <option value="2">$T('pp-unpack')</option>
-            <option value="3">$T('pp-delete')</option>
-            </select>
-        </td></tr>
-        #if $scripts#
-        <tr><td style="text-align:right">$T('script'):</td>
-          <td><select id="addID_script" name="script">
-            #for $sc in $scripts#
-            <option value="$sc">$Tspec($sc)</option>
-            #end for#
-            </select>
-        </td></tr>
-        #end if#
-      </table>
-  <div id="add_nzb_hr"><hr></div>
-    <i>$T('Plush-addnzb-filename'):</i><br/>
-    <input type="text" name="nzbname" id="addID_nzbname" size="38" />
-
-  </form>
-</div>
-
-  <div id="queue_purge_modal" class="center">
-    <br/><br/><strong>$T('purgeQueue')</strong>
-    <br/><br/><input type="submit" name="all" value="$T('purgeNZBs')" class="juiButton" />
-    <br/><br/><input type="submit" name="delete" value="$T('purgeNZBs-Files')" class="juiButton" />
-  </div>
-
-  <div id="queue_retry_modal" class="center">
-    <br/><br/><strong>$T('retryQueue')</strong>
-    <br/><br/><input type="submit" name="all" value="$T('retryNZBs')" class="juiButton" />
-  </div>
-
-  <div id="history_purge_modal" class="center">
-    <br/><br/><strong>$T('purgeHist')</strong>
-    <!--<br/><br/><input type="submit" name="all" value="Purge All NZBs" class="juiButton" />-->
-    <br/><br/><input type="submit" name="failed" value="$T('purgeFailed')" class="juiButton" />
-    <br/><br/><input type="submit" name="delete" value="$T('purgeFailed-Files')" class="juiButton" />
-    <br/><br/><input type="submit" name="completed" value="$T('purgeCompl')" class="juiButton" />
-  </div>
-
-  <div id="retry_modal">
-    <form action="history/retry_pp" method="post" enctype="multipart/form-data">
-      <input type="hidden" id="retry_modal_job" name="job" />
-      <input type="hidden" name="apikey" value="$apikey" />
-      <br/><p><strong id="retry_modal_title">title</strong></p>
-      <br/><p>$T('opt-extra-NZB'):<br/><input type="file" name="nzbfile" /></p>
-      <br/><p>$T('srv-password'):<br/><input type="text" name="password" /></p>
-      <br/><p><input type="submit" value="$T('button-retry')" class="juiButton" /></p>
-    </form>
-  </div>
-
-  <div id="delete_nzb_modal" class="center">
-    <input type="hidden" id="delete_nzb_modal_job" />
-    <input type="hidden" id="delete_nzb_modal_mode" />
-    <br/><br/><strong id="delete_nzb_modal_title">title</strong><br/><br/>
-    <input type="submit" id="delete_nzb_modal_remove_nzb" value="$T('removeNZB')" class="juiButton" />
-    <input type="submit" id="delete_nzb_modal_remove_files" value="$T('removeNZB-Files')" class="juiButton" />
-  </div>
-
-  <div id="flag_modal">
-    <input type="hidden" id="flag_modal_job" />
-    <div class="rating_flag_radio"><input type="radio" name="rating_flag" value="spam">&nbsp;$T('spam')</div>
-    <div class="rating_flag_radio"><input type="radio" name="rating_flag" value="encrypted">&nbsp;$T('encrypted')</div>
-    <div class="rating_flag_radio">
-      <input type="radio" name="rating_flag" value="expired">&nbsp;$T('expired')
-      <div class="rating_modal_extra">
-      <div class="rating_modal_expired">$T('host')&nbsp;&nbsp;<input type="text" name="expired_host" value="www.altopia.com" readonly></div>
-      <select name="common_host" onchange="expired_host_changed(this)">
-        <option value='www.altopia.com' selected>Altopia</option>
-        <option value='www.astraweb.com'>Astraweb</option>
-        <option value='www.euroaccess.ln'>EuroAccess</option>
-        <option value='www.forteinc.com'>Forte Agent</option>
-        <option value='www.giganews.com'>Giganews</option>
-        <option value='www.highwinds.com'>Highwinds</option>
-        <option value='www.newsdemon.com'>Newsdemon</option>
-        <option value='www.newsgroupdirect.com'>NewsGroupDirect</option>
-        <option value='www.newshosting.com'>NewsHosting</option>
-        <option value='www.readnews.com'>Readnews</option>
-        <option value='www.supernews.com'>SuperNews</option>
-        <option value='www.thundernews.com'>ThunderNews</option>
-        <option value='www.tweaknews.eu'>Tweaknews</option>
-        <option value='www.usenetserver.com'>UsenetServer</option>
-        <option value='www.xentech.net'>XenTech</option>
-        <option value='www.xsnews.nl'>XSnews</option>
-        <option value=''>$T('other')</option>
-      </select>
-      </div>
-    </div>
-    <div class="rating_flag_radio">
-      <input type="radio" name="rating_flag" value="other">&nbsp;$T('otherProblem')
-      <div class="rating_modal_extra"><input style="width:99%" type="text" name="other"></div>
-    </div>
-    <div class="rating_flag_radio">
-      <input type="radio" name="rating_flag" value="comment">&nbsp;$T('comment')
-      <div class="rating_modal_extra"><input style="width:99%" type="text" name="comment"></div>
-    </div>
-    <br/>
-    <div class="center">
-      <input id="submitbtn" type="submit" style="display:none;size:1"/>
-      <input value="Send" class="juiButton" onclick="flag_modal_submit(this)"/>
-      <label id="noopt" class="rating_modal_noopt" style="display:none;size:1">No option selected</label>
-    </div>
-  </div>
-
-#end if#
-
-  </div>
-

interfaces/Plush/templates/history.tmpl

@@ -1,153 +0,0 @@
-<% import datetime %>
-<% from sabnzbd.misc import time_format %>
-<script type="text/javascript">
-  if (typeof( jQuery ) == 'undefined')
-    window.location = "../"; // redirect to main on direct template hit
-
-  jQuery(function($) {
-    $.plush.histnoofslots      = $noofslots;
-    <!--#if $loadavg#-->
-    $.plush.SetLoadavg("$loadavg");
-    <!--#end if#-->
-    $.plush.SetHistoryStats("<!--#if $day_size#-->&nbsp;&nbsp;&nbsp;&nbsp;<strong>$day_size</strong>&nbsp;$T('today')<!--#end if #--><!--#if $week_size#-->&nbsp;&nbsp;&nbsp;&nbsp;<strong>$week_size</strong>&nbsp;$T('thisWeek')<!--#end if #--><!--#if $month_size#-->&nbsp;&nbsp;&nbsp;&nbsp;<strong>$month_size</strong>&nbsp;$T('thisMonth')<!--#end if #--><!--#if $total_size#-->&nbsp;&nbsp;&nbsp;&nbsp;<strong>$total_size</strong>&nbsp;$T('total')<!--#end if #-->");
-  });
-
-</script>
-
-<!--#if $limit > 1 or $search#-->
-<table class="queueTable" id="historyTable" cellspacing="0">
-<!--#set $cur = 0#-->
-<!--#for $line in $lines #-->
-  <!--#set $cur = $cur + 1#-->
-  <tr id="$line.nzo_id" class="<!--#if $cur%2#-->alt<!--#end if#--> <!--#if $line.action_line #-->active<!--#end if#-->">
-
-  <td class="nzb_status_col">
-    &nbsp;<div class="nzb_status <!--#if $line.action_line or $line.status=="Queued"#-->Loaded<!--#else if $line.status=="Failed"#-->main_sprite_container sprite_hv_error<!--#else#-->main_sprite_container sprite_hv_star<!--#end if#-->">&nbsp;</div>
-  </td>
-  <td class="historyTitle" <!--#if $rating_enable#-->style="width:35%"<!--#end if#-->>
-    <a href="scriptlog?name=$line.nzo_id" class="modal-detail" rel="details">$line.name</a>
-
-  <div style="display:none">
-    <div id="details-$line.nzo_id">
-
-  <table width="100%" class="rssTable">
-    <% compl = datetime.datetime.fromtimestamp(float(line['completed'])).strftime(time_format('%Y-%m-%d %H:%M:%S')) %>
-    <tr><td><strong>$T('completed')</strong></td><td>$compl</td></tr>
-    <tr class="odd"><td><strong>$T('name')</strong></td><td>$line.name<!--#if $line.action_line#--> - $line.action_line<!--#else if $line.fail_message#--> - <span class="fail_message">$line.fail_message</span><!--#end if#--></td></tr>
-    <tr><td><strong>$T('size')</strong></td><td>$line.size</td></tr>
-    <tr class="odd"><td><strong>$T('status')</strong></td><td>$T('post-'+$line.status)</td></tr>
-
-  <!--#set $oddLine = not False#-->
-  <!--#if $line.category#-->
-    <!--#set $oddLine = not $oddLine#-->
-    <tr <!--#if $oddLine#-->class="odd"<!--#end if#-->><td><b>$T('category')</b></td><td>$line.category</td></tr>
-  <!--#end if#-->
-  <!--#if $line.storage#-->
-    <!--#set $oddLine = not $oddLine#-->
-    <tr <!--#if $oddLine#-->class="odd"<!--#end if#-->><td><b>$T('msg-path')</b></td><td>$line.storage</td></tr>
-  <!--#end if#-->
-  <!--#for $stage in $line.stage_log#-->
-    <!--#set $oddLine = not $oddLine#-->
-    <tr <!--#if $oddLine#-->class="odd"<!--#end if#-->><td><b>$T('stage-'+$stage.name.title.lower())</b></td><td>
-    <!--#for $action in $stage.actions#-->
-      $action<br/>
-    <!--#end for#-->
-    </td></tr>
-  <!--#end for#-->
-</table>
-</div>
-</div>
-
-  </td>
-  <td>
-    <!--#if $line.url_info #-->
-      <a href="$line.url_info" target="_blank">
-        <div class="icon_history_verbose main_sprite_container sprite_hv_star pointer" title="$T('Plush-openInfoURL')<br><br>$line.url_info">&nbsp;</div>
-      </a>
-    <!--#end if#-->
-    <!--#if $line.size or $line.category or $line.path or $line.storage#-->
-      <div class="icon_history_verbose main_sprite_container sprite_hv_stats" title='<!--#if $line.size#-->$T('size'): $line.size<!--#end if#--><!--#if $line.category#--><br>$T('category'): $line.category<!--#end if#-->'>&nbsp;</div>
-    <!--#else#-->
-      <div class="icon_history_verbose main_sprite_container sprite_hv_stats hvFaded">&nbsp;</div>
-    <!--#end if#-->
-    <!--#for $stage in $line.stage_log#-->
-      <!--#if $stage.name.lower() == "script"#-->
-        <a href="scriptlog?name=$line.nzo_id" class="modal" rel="scriptlog">
-          <div class="icon_history_verbose main_sprite_container sprite_hv_$stage.name.lower() pointer" title='$T('Plush-viewScriptLog')'>&nbsp;</div>
-        </a>
-        <!--#if not $line.action_line#-->
-          <!--#for $action in $stage.actions#-->
-            <h3 class="hvMessageScript"><!--#echo $action.replace("'","&rsquo;").replace("<a href","<a class='modal' rel='scriptlog2' href") #--></h3>
-          <!--#end for#-->
-        <!--#end if#-->
-      <!--#else#-->
-        <!--#if $stage.name != "Source" and $stage.name != "Servers"#-->
-          <div class="icon_history_verbose main_sprite_container sprite_hv_$stage.name.lower()" title='<!--#for $action in $stage.actions#--><!--#echo $action.replace("'","&rsquo;") #--><br><!--#end for#-->'>&nbsp;</div>
-        <!--#end if#-->
-      <!--#end if#-->
-    <!--#end for#-->
-    <!--#if $line.retry#-->
-      <form action="history/retry_pp" method="post" enctype="multipart/form-data">
-        <input type="hidden" value="$line.nzo_id" name="job" />
-        <input type="hidden" name="apikey" value="$apikey" />
-        &nbsp;<a href="#" class="retry-nzbfile">$T('button-retry')</a>
-      </form>
-    <!--#end if#-->
-    <!--#if $line.action_line#-->
-    <h3 class="hvMessageAction">&raquo;&nbsp;$line.action_line&nbsp;</h3>
-    <!--#end if#-->
-    <!--#if $line.fail_message#-->
-    <h3 class="hvMessageFail">&raquo;&nbsp;$line.fail_message&nbsp;</h3>
-    <!--#end if#-->
-  </td>
-
-  <!--#if $rating_enable#-->
-    <!--#if $line.has_rating#-->
-      <td>
-        <div class="rating_stars_block_r">
-          <div class="rating_stars">
-            <div class="rating_icon_vision"></div><span class="avg_rate" value="$line.rating_avg_video"></span>
-            <input class="user_combo" type="hidden" value="$line.rating_user_video">
-            <select class="user_combo video" style="background:transparent">
-            <!--#if not $line.rating_user_video#--><option>-</option><!--#end if#-->
-            <!--#for $val in $range(1, 11)#--><option>$val</option><!--#end for#-->
-            </select>
-          </div>
-          <div class="rating_stars">
-            <div class="rating_icon_sound"></div><span class="avg_rate" value="$line.rating_avg_audio"></span>
-            <input class="user_combo" type="hidden" value="$line.rating_user_audio">
-            <select class="user_combo audio" style="background:transparent">
-            <!--#if not $line.rating_user_audio#--><option>-</option><!--#end if#-->
-            <!--#for $val in $range(1, 11)#--><option>$val</option><!--#end for#-->
-            </select>
-          </div>
-        </div>
-      </td>
-      <td>
-        <div class="rating_vote_block">
-          <div class="rating_icon_thumbup user_vote up"></div>
-          <!--#if $line.rating_user_vote==1#--><b><!--#end if#-->$line.rating_avg_vote_up<!--#if $line.rating_user_vote==1#--></b><!--#end if#-->
-          <div class="rating_icon_thumbdown user_vote down"></div>
-          <!--#if $line.rating_user_vote==2#--><b><!--#end if#-->$line.rating_avg_vote_down<!--#if $line.rating_user_vote==2#--></b><!--#end if#-->
-        </div>
-        <div class="rating_flag">
-          <a href="#" class="show_flags">$T('report')</a>
-        </div>
-      </td>
-    <!--#else#-->
-      <td></td><td></td>
-    <!--#end if#-->
-  <!--#end if#-->
-
-  <td class="options nowrap">
-    <!--#if not $line.loaded#-->
-    <% d = datetime.datetime.fromtimestamp(float(line['completed'])) %>
-    <small class="history_added">$d</small>
-    <div class="main_sprite_container icon_nzb_remove" title="$T('nzo-delete')">&nbsp;</div>
-    <!--#end if#-->
-  </td>
-
-  </tr>
-<!--#end for#-->
-</table>
-<!--#end if#-->

interfaces/Plush/templates/main.tmpl

@@ -1,241 +0,0 @@
-<!--#set global $pane="Main"#-->
-<!--#set global $help_uri=""#-->
-<!--#include $webdir + "/_inc_header.tmpl"#-->
-
-  <div id="page-wrap" class="tiley_sprite_container sprite_tile_queue_wrap">
-
-  <div id="hdr-queue" class="tilex_sprite_container sprite_tile_qh">
-    <div class="logo main_sprite_container sprite_topleft_queue"><h1><!--#if $active_lang in ('de', 'fr') then $T('menu-queue') else $T('menu-queue').upper()#--></h1></div>
-    <form id="queueSearchForm" action="#"><input id="queueSearchBox" type="text" size="8" class="listSearchBox main_sprite_container sprite_h_search" /></form>
-    <div class="queue-buttons queue-buttons-pause lang-$active_lang main_sprite_container sprite_topright_queue">
-      <ul>
-        <li class="main_sprite_container <!--#if $paused then 'sprite_q_pause_on' else 'sprite_q_pause'#-->" title="$T('link-pause') &frasl; $T('link-resume')" id="pause_resume"></li>
-        <li class="main_sprite_container sprite_q_menu_pausefor">
-          <a href="#"></a>
-          <ul id="set_pause_list">
-            <li><a href="javascript:void(0)" class="set_pause pointer" rel="5">$T('Plush-pause5m')</a></li>
-            <li><a href="javascript:void(0)" class="set_pause pointer" rel="15">$T('Plush-pause15m')</a></li>
-            <li><a href="javascript:void(0)" class="set_pause pointer" rel="30">$T('Plush-pause30m')</a></li>
-            <li><a href="javascript:void(0)" class="set_pause pointer" rel="60">$T('Plush-pause1h')</a></li>
-            <li><a href="javascript:void(0)" class="set_pause pointer" rel="180">$T('Plush-pause3h')</a></li>
-            <li><a href="javascript:void(0)" class="set_pause pointer" rel="360">$T('Plush-pause6h')</a></li>
-            <li><a href="javascript:void(0)" class="set_pause pointer" rel="custom" id="pauseForPrompt" title="$T('Plush-pauseForPrompt')">$T('Plush-pauseFor')</a></li>
-          </ul>
-        </li>
-        <li id="pause_int"></li>
-          <li class="main_sprite_container sprite_q_queue">
-            <a class="sf-with-ul">$T('menu-queue')</a>
-            <ul>
-              <!--#if $have_logout#--><li><a href="login?logout=1">$T('logout')</a></li><!--#end if#-->
-              <!--#if $have_quota#--><li><a id="reset_quota_now" class="pointer">$T('link-resetQuota')</a></li><!--#end if#-->
-              <!--#if $have_rss_defined#--><li><a id="get_rss_now" class="pointer">$T('button-rssNow')</a></li><!--#end if#-->
-              <!--#if $have_watched_dir#--><li><a id="get_watched_now" class="pointer">$T('sch-scan_folder')</a></li><!--#end if#-->
-              <!--#if $pp_pause_event#--><li><a id="resume_pp" class="pointer">$T('sch-resume_post')</a></li><!--#end if#-->
-              <li><a id="topmenu_toggle" class="pointer">$T('Plush-topMenu')</a></li>
-              <li><a id="multiops_toggle" class="pointer">$T('Plush-multiOperations')</a></li>
-              <li>
-                <a class="sf-with-ul">$T('Plush-onQueueFinish'):
-                  <br/>
-                  <select id="onQueueFinish-option">
-                    <option value=""></option>
-                    <optgroup label="$T('eoq-actions')">
-                      <option value="shutdown_program" <!--#if $finishaction == 'shutdown_program' then 'selected' else ''#-->>$T('shutdownSab')</option>
-                      <!--#if $power_options#-->
-                      <option value="shutdown_pc" <!--#if $finishaction == 'shutdown_pc' then 'selected' else ''#-->>$T('shutdownPc')</option>
-                      <option value="standby_pc" <!--#if $finishaction == 'standby_pc' then 'selected' else ''#-->>$T('standbyPc')</option>
-                      <option value="hibernate_pc" <!--#if $finishaction == 'hibernate_pc' then 'selected' else ''#-->>$T('hibernatePc')</option>
-                      <!--#end if#-->
-                    </optgroup>
-                    <!--#if $scripts#-->
-                    <optgroup label="$T('eoq-scripts')">
-                      <!--#for $sc in $scripts#-->
-                      <!--#if $sc != 'None'#-->
-                      <option value="script_$sc" <!--#if $finishaction == 'script_'+$sc then 'selected' else ''#-->>$sc</option>
-                      <!--#end if#-->
-                      <!--#end for#-->
-                    </optgroup>
-                    <!--#end if#-->
-                  </select>
-                </a>
-              </li>
-              <li><a id="queue_purge" class="pointer" rel="$T('Plush-confirmPurgeQ')">$T('Plush-purge')</a></li>
-              <li><a id="queue_retry" class="pointer" rel="$T('Plush-confirmRetryQ')">$T('link-retryAll')</a></li>
-              <li>
-                <a class="sf-with-ul">$T('Plush-sort')</a>
-                <ul id="queue_sort_list">
-                  <li class="queue_sort pointer" id="sortAgeAsc"><a>$T('Plush-sortAgeAsc')</a></li>
-                  <li class="queue_sort pointer" id="sortAgeDesc"><a>$T('Plush-sortAgeDesc')</a></li>
-                  <li class="queue_sort pointer" id="sortNameAsc"><a>$T('Plush-sortNameAsc')</a></li>
-                  <li class="queue_sort pointer" id="sortNameDesc"><a>$T('Plush-sortNameDesc')</a></li>
-                  <li class="queue_sort pointer" id="sortSizeAsc"><a>$T('Plush-sortSizeAsc')</a></li>
-                  <li class="queue_sort pointer" id="sortSizeDesc"><a>$T('Plush-sortSizeDesc')</a></li>
-                </ul>
-              </li>
-            </ul>
-        </li>
-      </ul>
-    </div>
-    <div class="centerpiece">
-      <div class="main_sprite_container sprite_rounded_area_bg" id="time-left"><p><span id="stats_eta">&sdot;</span>&nbsp;$T('Plush-left')</p></div>
-      <div class="sabnzbd_logo main_sprite_container"><!--#include $webdir + "/../../Config/templates/staticcfg/images/logo-full.svg"#--></div>
-      <div class="main_sprite_container sprite_rounded_area_bg_edged" id="speed"><p><span id="stats_speed">&sdot;</span></p></div>
-      <div class="queue-buttons" id="speed-wrapper">
-        <ul>
-          <li class="main_sprite_container sprite_q_menu_pausefor">
-            <ul>
-              <li>
-                $T('Plush-maxSpeed'):&nbsp;&nbsp;
-                <input type="text" id="maxSpeed-option" size="4" />
-                <select id="maxSpeed-label">
-                    <option value="%">%</option>
-                    <option value="K">KB/s</option>
-                    <option value="M">MB/s</option>
-                </select>
-              </li>
-              <li>
-                <input type="button" value="$T('Plush-reset')" id="maxSpeed-disable" />
-                <input type="button" value="$T('button-save')" id="maxSpeed-enable" />
-              </li>
-            </ul>
-        </li>
-        </ul>
-      </div>
-    </div>
-  </div>
-
-  <div id="queue-wrap" class="tiley_sprite_container sprite_tile_page_wrap">
-    <div class="box_banner_hr main_sprite_container sprite_tile_qh_seperator"></div>
-
-  <!-- multi-operations for queue processing -->
-  <div id="multiops_bar" class="tilex_sprite_container sprite_tile_qhistory" style="display:none">
-    <div id="multiops_inputs">
-
-  <div class="left">
-    <div id="multiops_title">$T('Plush-multiOperations')</div>
-  </div>
-
-  <div class="right">
-    <input type="button" id="multi_reset" value="$T('Plush-reset')" />
-    <input type="button" id="multi_apply" value="$T('Plush-applySelected')" />
-  </div>
-
-  <br class="clear"/>
-
-  <div class="left">
-    $T('nzo-selection'):&nbsp;
-    <a id="multiops_select_all">$T('nzo-all').capitalize()</a> &sdot;
-    <a id="multiops_select_range">$T('Plush-nzo-range').capitalize()</a> &sdot;
-    <a id="multiops_select_invert">$T('nzo-invert').capitalize()</a> &sdot;
-    <a id="multiops_select_none">$T('nzo-none').capitalize()</a>
-  </div>
-
-
-  <div class="right">
-    <select id="multi_status"><optgroup label="$T('status')">
-      <option value="">$T('status')</option>
-      <option value="pause">$T('sch-pause')</option>
-      <option value="resume">$T('sch-resume')</option>
-    </optgroup></select>
-<!--#if $categories#-->
-  <select id="multi_cat"><optgroup label="$T('category')">
-    <option value="">$T('category')</option>
-  <!--#for $ct in $categories#-->
-    <option value="$ct">$Tspec($ct)</option>
-  <!--#end for#-->
-  </optgroup></select>
-<!--#end if#-->
-  <select id="multi_priority"><optgroup label="$T('priority')">
-    <option value="">$T('priority')</option>
-    <option value="2">$T('pr-force')</option>
-    <option value="1">$T('pr-high')</option>
-    <option value="0">$T('pr-normal')</option>
-    <option value="-1">$T('pr-low')</option>
-  </optgroup></select>
-  <select id="multi_pp"><optgroup label="$T('pp')">
-    <option value="">$T('pp')</option>
-    <option value="0">$T('pp-none')</option>
-    <option value="1">$T('pp-repair')</option>
-    <option value="2">$T('pp-unpack')</option>
-    <option value="3">$T('pp-delete')</option>
-  </optgroup></select>
-<!--#if $scripts#-->
-  <select id="multi_script"><optgroup label="$T('script')">
-    <option value="">$T('script')</option>
-  <!--#for $sc in $scripts#-->
-    <!--#if $sc != "Default"#--><option value="$sc">$Tspec($sc)</option><!--#end if#-->
-  <!--#end for#-->
-  </optgroup></select>
-<!--#end if#-->
-
-  <div id="multi_delete" class="main_sprite_container icon_nzb_remove sprite_ql_cross_on" title="$T('nzo-delete')">&nbsp;</div>
-
-  </div>
-</div>
-</div>
-
-  <!-- Queue ( queue.tmpl )-->
-  <div id="queue"></div>
-    <div class="box_fatbottom tilex_sprite_container sprite_tile_qh_bottom" id="box_fatbottom_queue">
-      <div class="right_stats nowrap" id="queue_stats"></div>
-      <div class="left_stats">
-        <select id="queue-pagination-perpage" class="pagination-perpage">
-          <option value="5">5 / $T('Plush-page')</option>
-          <option value="10">10 / $T('Plush-page')</option>
-          <option value="20">20 / $T('Plush-page')</option>
-          <option value="30">30 / $T('Plush-page')</option>
-          <option value="40">40 / $T('Plush-page')</option>
-          <option value="50">50 / $T('Plush-page')</option>
-          <option value="9999999">$T('Plush-everything')</option>
-        </select>
-        <div class="initial-loading">&nbsp;</div>
-        <div id="queue-pagination" class="pagination"></div>
-      </div>
-    </div>
-
-  <!-- History Menu/Banner -->
-  <div id="hdr-history" class="box_banner_history tilex_sprite_container sprite_tile_qhistory">
-    <h1><!--#if $active_lang in ('de', 'fr') then $T('menu-history') else $T('menu-history').upper()#--> </h1>
-    <div class="box_banner_r">
-      <ul class="box_banner_menu">
-        <li class="main_sprite_container sprite_h_purge show" id="hist_purge" title="$T('purgeHist')"></li>
-        <li><select id="failed_only" style="margin-top:8px;">
-          <option value="0">$T('showAllHis')</option>
-          <option value="1">$T('showFailedHis')</option>
-        </select></li>
-        <li><form id="historySearchForm" action="#"><input id="historySearchBox" type="text" size="8" class="listSearchBox main_sprite_container sprite_h_search" /></form></li>
-      </ul>
-    </div>
-  </div>
-  <div class="box_banner_hr main_sprite_container sprite_tile_qh_seperator"></div>
-
-  <!-- History ( history.tmpl ) -->
-  <div id="history"></div>
-  <div class="box_fatbottom history_stats tilex_sprite_container sprite_tile_qh_bottom">
-    <div class="right_stats nowrap" id="history_stats"></div>
-    <div class="left_stats">
-      <select id="history-pagination-perpage" class="pagination-perpage">
-        <option value="5">5 / $T('Plush-page')</option>
-        <option value="10">10 / $T('Plush-page')</option>
-        <option value="20">20 / $T('Plush-page')</option>
-        <option value="30">30 / $T('Plush-page')</option>
-        <option value="40">40 / $T('Plush-page')</option>
-        <option value="50">50 / $T('Plush-page')</option>
-        <option value="9999999">$T('Plush-everything')</option>
-        <option value="1">$T('Plush-disabled')</option>
-      </select>
-      <div class="initial-loading">&nbsp;</div>
-      <div id="history-pagination" class="pagination"></div>
-    </div>
-    <div class="plush_wrapper"><div class="main_sprite_container sprite_sabnzbdplus_plush">&nbsp;</div></div>
-  </div>
-
-  </div>
-
-  <div id="btm-wrapper" class="tilex_sprite_container sprite_tile_bottom_wrap">
-    <div class="main_sprite_container sprite_btm_corner_right"></div>
-    <div class="main_sprite_container sprite_btm_corner_left"></div>
-  </div>
-
-  </div><!--#page_wrap-->
-
-<!--#include $webdir + "/_inc_footer.tmpl"#-->

interfaces/Plush/templates/nzo.tmpl

@@ -1,102 +0,0 @@
-<!--#set global $pane="Nzo"#-->
-<!--#set global $help_uri=""#-->
-<!--#include $webdir + "/_inc_header.tmpl"#-->
-
-  <!--#if $varExists('slot')#-->
-    <form action="save" method="post" class="nzo_save_form">
-      <input type="hidden" name="apikey" value="$apikey">
-
-  <input type="text" name="name" size="70" value="$slot.filename_clean" />
-  <input type="text" name="password" style="width:200px" size="100" value="$slot.password" placeholder="$T('srv-password')"/>
-
-  <div>
-  <select name="index"><optgroup label="$T('order')">
-  <!--#for $i in range($noofslots)#-->
-    <option value=$i <!--#if $i == $index then "selected" else ""#-->>$i</option>
-  <!--#end for#-->
-  </select>
-  <!--#if $categories#-->
-  <select name="cat"><optgroup label="$T('category')">
-    <!--#for $ct in $categories#-->
-    <option value="$ct" <!--#if $slot.cat.lower() == $ct.lower() then "selected" else ""#-->>$Tspec($ct)</option>
-    <!--#end for#-->
-  </optgroup></select>
-  <!--#end if#-->
-  <select name="priority"><optgroup label="$T('priority')">
-    <option value="-100" <!--#if $slot.priority == "-100" then "selected" else ""#-->>$T('default')</option>
-    <option value="2" <!--#if $slot.priority == "2" then "selected" else ""#-->>$T('pr-force')</option>
-    <option value="1" <!--#if $slot.priority == "1" then "selected" else ""#-->>$T('pr-high')</option>
-    <option value="0" <!--#if $slot.priority == "0" then "selected" else ""#-->>$T('pr-normal')</option>
-    <option value="-1" <!--#if $slot.priority == "-1" then "selected" else ""#-->>$T('pr-low')</option>
-  </optgroup></select>
-  <select name="pp"><optgroup label="$T('pp')">
-    <option value="0" <!--#if $slot.unpackopts == "0" then "selected" else ""#-->>$T('pp-none')</option>
-    <option value="1" <!--#if $slot.unpackopts == "1" then "selected" else ""#-->>$T('pp-repair')</option>
-    <option value="2" <!--#if $slot.unpackopts == "2" then "selected" else ""#-->>$T('pp-unpack')</option>
-    <option value="3" <!--#if $slot.unpackopts == "3" then "selected" else ""#-->>$T('pp-delete')</option>
-  </optgroup></select>
-  <!--#if $scripts#-->
-  <select name="script"><optgroup label="$T('script')">
-    <!--#for $sc in $scripts#-->
-    <option value="$sc" <!--#if $slot.script.lower() == $sc.lower() then "selected" else ""#-->>$Tspec($sc)</option>
-    <!--#end for#-->
-  </optgroup></select>
-  <!--#end if#-->
-  <input type="submit" class="juiButton" value="$T('button-save')" />
-  </div>
-
-  </form>
-<!--#end if#-->
-
-  <form action="bulk_operation" id="bulk_operation">
-  <input type="hidden" name="apikey" value="$apikey">
-  <input type="hidden" name="action_key" id="action_key" />
-
-  <div class="config_nav lang-$active_lang">
-    <ul>
-      <li><a class="config_menu" id="nzo_reload"><span class="config_sprite_container sprite_nzo_reload">$T('Plush-button-refresh')</span></a></li>
-      <br/>&nbsp;$T('nzo-action'):
-      <li><a id="nzo_delete"><span class="config_sprite_container sprite_nzo_delete">$T('nzo-delete')</span></a></li>
-      <li><a id="nzo_top"><span class="config_sprite_container sprite_nzo_top">$T('nzo-top')</span></a></li>
-      <li><a id="nzo_up"><span class="config_sprite_container sprite_nzo_up">$T('nzo-up')</span></a></li>
-      <li><a id="nzo_down"><span class="config_sprite_container sprite_nzo_down">$T('nzo-down')</span></a></li>
-      <li><a id="nzo_bottom"><span class="config_sprite_container sprite_nzo_bottom">$T('nzo-bottom')</span></a></li>
-      <br/>&nbsp;$T('nzo-selection'):
-      <li><a id="nzo_select_all"><span class="config_sprite_container sprite_nzo_select_all">$T('nzo-all').capitalize()</span></a></li>
-      <li><a id="nzo_select_range"><span class="config_sprite_container sprite_nzo_select_range">$T('Plush-nzo-range').capitalize()</span></a></li>
-      <li><a id="nzo_select_invert"><span class="config_sprite_container sprite_nzo_select_invert">$T('nzo-invert').capitalize()</span></a></li>
-      <li><a id="nzo_select_none"><span class="config_sprite_container sprite_nzo_select_none">$T('nzo-none').capitalize()</span></a></li>
-    </ul>
-  </div>
-
-  <div id="config_container" class="config_margin config_margin_wide lang-$active_lang">
-    <div id="config_content">
-
-  <table class="nzoTable">
-    <tr><th></th><th>$T('Plush-progress')</th><th>$T('nzo-filename')/$T('nzo-subject')</th><th>$T('nzo-age')</th></tr>
-    <!--#set $oddLine = False#-->
-    <!--#for $file in $active_files#-->
-      <!--#set $oddLine = not $oddLine#-->
-      <tr id="$file.nzf_id" class="nzf_row <!--#if $oddLine then "oddLine" else "evenLine"#--> active">
-        <td><input type="checkbox" name="$file.nzf_id" id="box-$file.nzf_id" <!--#if $file.checked then "checked" else ""#-->></td>
-        <td valign="middle">
-          <div class="main_sprite_container sprite_progressbar_bg">
-            <div class="main_sprite_container sprite_progress_done" style="background-position: -<!--#if $file.mb == "0.00" then "120" else int(120 - 120.0 / 100.0 * int(100 - float($file.mbleft) / float($file.mb) * 100))#-->px -401px">
-              <div class="totalDownload">$file.mbleft&nbsp;<small>$T('Plush-left')</small></div>
-              <div class="currentDownload">$file.mb&nbsp;<small>$T('MB')</small></div>
-            </div>
-          </div>
-        </td>
-        <td class="filename">$file.filename</td>
-        <td class="alignRight">$file.age</td>
-      </tr>
-    <!--#end for#-->
-  </table>
-
-  </div>
-</div>
-
-  </form>
-
-
-<!--#include $webdir + "/_inc_footer.tmpl"#-->

interfaces/Plush/templates/queue.tmpl

@@ -1,132 +0,0 @@
-<script type="text/javascript">
-  if (typeof( jQuery ) == 'undefined')
-    window.location = "../"; // redirect to main on direct template hit
-
-  jQuery(function($) {
-    $.plush.queuenoofslots = $noofslots;
-    $.plush.SetQueueSpeedLimit('$speedlimit', '$speedlimit_abs');
-    $.plush.SetQueueFinishAction('$finishaction');
-    $.plush.SetWarnings($have_warnings,"");
-    $.plush.SetQueuePauseInfo(<!--#if $paused#-->true<!--#else#-->false<!--#end if#-->,'$pause_int');
-    $.plush.SetQueueETAStats("<!--#if float($kbpersec) > 1023 #-->$speed<!--#else#--><!--#echo "%.0f" % float($kbpersec)#--> K<!--#end if#-->",<!--#echo "%.0f" % float($kbpersec)#-->,'$timeleft','$T('eta'): $eta');
-
-  // set lower-right queue stats
-  var stats = '';
-  <!--#if $have_quota#-->
-  stats += '<strong>$left_quota&nbsp;&nbsp;&frasl;&nbsp;&nbsp;$quota</strong>&nbsp;$T('quota-left')&nbsp;&nbsp;';
-  <!--#end if#-->
-  <!--#if $noofslots > 0#-->
-  stats += '<strong>$mbleft&nbsp;&nbsp;&frasl;&nbsp;&nbsp;$mb&nbsp;$T('MB')</strong>&nbsp;$T('Plush-remaining')';
-  <!--#end if#-->
-  <!--#if $diskspace1 == $diskspace2#-->
-  stats += '<div class="queue_footer_icon <!--#if float($diskspace1) < float($mbleft)/1024 #-->main_sprite_container sprite_q_stats_needspace" title="$T('Plush-notEnoughSpace')<!--#else#-->main_sprite_container sprite_q_stats_incomplete<!--#end if#-->">&nbsp;&nbsp;&nbsp;</div><strong>$diskspace1_norm$T('B')</strong>&nbsp;$T('Plush-freeSpace')';
-  <!--#else#-->
-  stats += '<div class="queue_footer_icon <!--#if float($diskspace1) < float($mbleft)/1024 #-->main_sprite_container sprite_q_stats_needspace" title="$T('Plush-notEnoughSpace')<!--#else#-->main_sprite_container sprite_q_stats_incomplete<!--#end if#-->">&nbsp;&nbsp;&nbsp;</div><strong>$diskspace1&nbsp;$T('GB')</strong>&nbsp;$T('Plush-freeSpaceTemp')'
-    +'<div class="queue_footer_icon <!--#if float($diskspace2) < float($mbleft)/1024 #-->main_sprite_container sprite_q_stats_needspace" title="$T('Plush-notEnoughSpace')<!--#else#-->main_sprite_container sprite_q_stats_complete<!--#end if#-->">&nbsp;&nbsp;&nbsp;</div><strong>$diskspace2_norm$T('B')</strong>&nbsp;$T('Plush-freeSpace')';
-  <!--#end if#-->
-  $.plush.SetQueueStats(stats);
-});
-
-  // set the page title here (due to localizations)
-  <!--#if $noofslots < 1 #-->
-    <!--#if $paused#-->
-    document.title = '$T('ft-paused') | SABnzbd $version';
-    <!--#else#-->
-    document.title = '$T('Plush-idle') | SABnzbd $version';
-    <!--#end if#-->
-  <!--#else if $paused#-->
-    document.title = '$T('ft-paused') | <!--#echo "%.0f" % float($mbleft)#--> $T('MB') $T('Plush-left') | $noofslots NZBs';
-  <!--#else#-->
-    document.title = '<!--#if float($kbpersec) > 1023 #-->$speed<!--#else#--><!--#echo "%.0f" % float($kbpersec)#--> K<!--#end if#-->B/s | <!--#echo "%.0f" % float($mbleft)#--> $T('MB') | $timeleft $T('Plush-left')';
-  <!--#end if#-->
-
-</script>
-
-
-<table class="queueTable" id="queueTable" cellspacing="0">
-<!--#set $cur = 0#-->
-<!--#for $slot in $slots#-->
-  <!--#set $cur = $cur + 1#-->
-  <tr id="$slot.nzo_id"<!--#if $cur%2#--> class="alt"<!--#end if#-->>
-
-  <td class="nzb_status_col nowrap">
-    &nbsp;<div class="nzb_status <!--#if $slot.status == "Paused"#-->main_sprite_container sprite_ql_grip_pause<!--#else#-->main_sprite_container sprite_ql_grip_resume<!--#end if#-->">&nbsp;
-    </div>
-    <% # <!--#else if $slot.status == "Downloading"#-->main_sprite_container sprite_ql_grip_active %>
-  </td>
-
-  <td class="download-title" <!--#if $rating_enable#-->style="width:35%"<!--#end if#-->>
-     <!--#for $label in $slot.labels#-->
-       <span class="label">$label</span>
-     <!--#end for#-->
-    <a href="nzb/$slot.nzo_id/" title="$T('status'): $T('post-'+$slot.status)<br/>$T('nzo-age'): $slot.avg_age<br/><!--#if $slot.mbmissing!="0.00"#-->$T('missingArt'): $slot.mbmissing $T('MB')<!--#end if#-->">$slot.filename.replace('.', '.&#8203;').replace('_', '_&#8203;')<!--#if $slot.password#--> /  $slot.password<!--#end if#--></a>
-  </td>
-
-  <!--#if $rating_enable#-->
-    <!--#if $slot.has_rating#-->
-      <td>
-        <div class="rating_stars_block_c">
-          <div class="rating_stars">
-            <div class="rating_icon_vision"></div><span class="avg_rate" value="$slot.rating_avg_video"></span>
-          </div>
-          <div class="rating_stars">
-            <div class="rating_icon_sound"></div><span class="avg_rate" value="$slot.rating_avg_audio"></span>
-          </div>
-        </div>
-      </td>
-    <!--#else#-->
-      <td></td>
-    <!--#end if#-->
-  <!--#end if#-->
-
-  <td>
-    <div class="main_sprite_container sprite_progressbar_bg">
-      <div class="main_sprite_container sprite_progress_done" style="background-position: -<!--#if $slot.mb == "0.00" then "120" else int(120 - 120.0 / 100.0 * int(100 - float($slot.mbleft) / float($slot.mb) * 100))#-->px -401px">
-        <div class="totalDownload">$slot.mb_fmt&nbsp;<small>$T('MB')</small></div>
-        <div class="currentDownload"><!--#if $slot.mb!=$slot.mbleft#-->$slot.mbdone_fmt&nbsp;<small>$T('MB')&nbsp;$T('AofB')</small><!--#end if#--></div>
-      </div>
-    </div>
-  </td>
-
-  <td class="eta nowrap">
-    <!--#if (not $paused and $slot.status not in ("Paused", "Checking")) or $slot.priority == 'Force'#-->
-    <span title="$slot.eta">$slot.timeleft&nbsp;$T('Plush-left')</span>
-    <!--#else#-->
-    $T('post-'+$slot.status)
-    <!--#end if#-->
-  </td>
-
-  <td class="options nowrap">
-    <!--#if $categories#-->
-    <select class="change_cat"><optgroup label="$T('category')">
-      <!--#for $ct in $categories#-->
-      <option value="$ct" <!--#if $slot.cat.lower() == $ct.lower() then "selected" else ""#-->>$Tspec($ct)</option>
-      <!--#end for#-->
-    </optgroup></select>
-    <!--#end if#-->
-    <select class="proc_priority"><optgroup label="$T('priority')">
-      <option value="2" <!--#if $slot.priority == "Force" then "selected" else ""#-->>$T('pr-force')</option>
-      <option value="1" <!--#if $slot.priority == "High" then "selected" else ""#-->>$T('pr-high')</option>
-      <option value="0" <!--#if $slot.priority == "Normal" then "selected" else ""#-->>$T('pr-normal')</option>
-      <option value="-1" <!--#if $slot.priority == "Low" then "selected" else ""#-->>$T('pr-low')</option>
-      <option value="-4" <!--#if $slot.priority == "Stop" then "selected" else ""#-->>$T('pr-stop')</option>
-    </optgroup></select>
-    <select class="change_opts"><optgroup label="$T('pp')">
-      <option value="0" <!--#if $slot.unpackopts == "0" then "selected " else ""#-->>$T('pp-none')</option>
-      <option value="1" <!--#if $slot.unpackopts == "1" then "selected " else ""#-->>$T('pp-repair')</option>
-      <option value="2" <!--#if $slot.unpackopts == "2" then "selected " else ""#-->>$T('pp-unpack')</option>
-      <option value="3" <!--#if $slot.unpackopts == "3" then "selected " else ""#-->>$T('pp-delete')</option>
-    </optgroup></select>
-    <!--#if $scripts#-->
-    <select class="change_script"><optgroup label="$T('script')">
-      <!--#for $sc in $scripts#-->
-      <option value="$sc"  <!--#if $slot.script == $sc then "selected" else ""#-->>$Tspec($sc)</option>
-      <!--#end for#-->
-    </optgroup></select>
-    <!--#end if#-->
-    <div class="main_sprite_container icon_nzb_remove" title="$T('nzo-delete')">&nbsp;</div>
-  </td>
-
-  </tr>
-<!--#end for#-->
-</table>

interfaces/Plush/templates/static/javascripts/config.js

@@ -1,233 +0,0 @@
-// *****************************************************************
-// Plush Config code as follows, by pairofdimes (see LICENSE-CC.txt)
-
-jQuery(document).ready(function($){
-
-  // Top Menu
-  var noTopMenu = $.cookie('plushNoTopMenu')  ? $.cookie('plushNoTopMenu')  : 0;
-  $('#topmenu_bar').show();
-
-  // Container width
-  var containerWidth = $.cookie('plushContainerWidth')  ? $.cookie('plushContainerWidth')  : '100%';
-  $('#master-width').css('width',containerWidth);
-
-  // Confirm user exits without saving changes first
-  if (config_pane != 'NZO') {
-    $(':input','form').change(function(){
-      window.onbeforeunload = function(){return confirmWithoutSavingPrompt;}
-    });
-    $('form').submit(function(){
-      window.onbeforeunload = null;
-    });
-  }
-
-  // modals
-  $("#help").colorbox({ inline:true, href:"#help_modal", title:$("#help").text(),
-    innerWidth:"375px", innerHeight:"350px", initialWidth:"375px", initialHeight:"350px", speed:0, opacity:0.7
-  });
-  $(".show_qrcode").colorbox({ photo:true, innerHeight:"300px", innerWidth:"300px", speed:0, opacity: 0.7, scrolling:false });
-
-  // jqueryui tabs/buttons
-  $('.juiButton').button();
-  $( ".tabs" ).tabs({
-    cookie: {
-      expires: 1 // store cookie for a day, without, it would be a session cookie
-    }
-  });
-  $(".vertical-tabs").tabs().addClass('ui-tabs-vertical ui-helper-clearfix');
-  $(".vertical-tabs li").removeClass('ui-corner-top').addClass('ui-corner-left');
-
-  // kludge for jqueryui tabs, using cookie option above for some reason does not select the default 1st tab
-  $('.tabs').each(function(index) {
-    if (!$(this).children('ul.ui-tabs-nav').children('li.ui-tabs-selected').length)
-      $(this).tabs('select',0);
-  });
-
-  // kludge for jqueryui tabs, clicking for an existing tab doesnt switch to it
-  $('#activeFeedLink').click(function(){
-    // tab-feed focus
-    $( ".tabs" ).tabs("select",1)
-    return false;
-  });
-
-  switch(config_pane) {
-
-  // not a config page, rather queued nzb file listing page
-  case 'NZO':
-    $('#nzo_reload').click(function(){ document.location.reload(); });
-
-  // operations
-  $('#nzo_delete').click(function(){
-    $('#action_key').val('Delete');
-    $('#bulk_operation').submit();
-  });
-  $('#nzo_top').click(function(){
-    $('#action_key').val('Top');
-    $('#bulk_operation').submit();
-  });
-  $('#nzo_up').click(function(){
-    $('#action_key').val('Up');
-    $('#bulk_operation').submit();
-  });
-  $('#nzo_down').click(function(){
-    $('#action_key').val('Down');
-    $('#bulk_operation').submit();
-  });
-  $('#nzo_bottom').click(function(){
-    $('#action_key').val('Bottom');
-    $('#bulk_operation').submit();
-  });
-
-  // selections
-  $("#nzo_select_all").click(function(){
-    $("INPUT[type='checkbox']").prop('checked', true).trigger('change');
-  });
-  var last1, last2;
-  $("#nzo_select_range").click(function(){
-    if (last1 && last2 && last1 < last2)
-      $("INPUT[type='checkbox']").slice(last1,last2).prop('checked', true).trigger('change');
-    else if (last1 && last2)
-      $("INPUT[type='checkbox']").slice(last2,last1).prop('checked', true).trigger('change');
-  });
-  $("#nzo_select_invert").click(function(){
-    $("INPUT[type='checkbox']").each( function() {
-      $(this).prop('checked', !$(this).prop('checked')).trigger('change');
-    });
-  });
-  $("#nzo_select_none").click(function(){
-    $("INPUT[type='checkbox']").prop('checked', false).trigger('change');
-  });
-
-  // click filenames to select
-  $('#config_content .nzoTable .nzf_row').click(function(event) {
-    $('#box-'+$(event.target).parent().attr('id')).prop('checked', !$('#box-'+$(event.target).parent().attr('id')).prop('checked')).trigger('change');
-
-  // range event interaction -- see further above
-  if (last1) last2 = last1;
-  last1 = $(event.target).parent()[0].rowIndex ? $(event.target).parent()[0].rowIndex : $(event.target).parent().parent()[0].rowIndex;
-});
-
-  //
-  $('#config_content .nzoTable .nzf_row input').change(function(e){
-    if ($(e.target).prop('checked'))
-      $(e.target).parent().parent().addClass("nzo_highlight");
-    else
-      $(e.target).parent().parent().removeClass("nzo_highlight");
-  });
-
-  // set highlighted property for checked rows upon reload
-  $('#config_content .nzoTable .nzf_row input:checked').parent().parent().addClass("nzo_highlight");
-
-  return; // skip the rest of the config methods
-  break;
-
-
-  case 'Status':
-    $('#logging_level').change(function(event){
-      window.location = './change_loglevel?loglevel='+$(event.target).val()+'&apikey='+apikey;
-    });
-    break;
-
-  case 'General':
-    $('#apikey').click(function(){ $('#apikey').select() });
-    $('#generate_new_apikey').click(function(){
-      if (confirm($(this).attr('rel'))) {
-        $.ajax({
-          type: "POST",
-          url: "../../api",
-          data: {mode:'config', name:'set_apikey', apikey: $('#apikey').val()},
-          success: function(msg){
-            $('#apikey,#session').val(msg);
-            window.location.reload();
-          }
-        });
-      }
-    });
-    $('#generate_new_nzbkey').click(function(){
-      if (confirm($(this).attr('rel'))) {
-        $.ajax({
-          type: "POST",
-          url: "../../api",
-          data: {mode:'config', name:'set_nzbkey', apikey: $('#apikey').val()},
-          success: function(msg){
-            $('#nzbkey,#session').val(msg);
-            window.location.reload();
-          }
-        });
-      }
-    });
-    $('#sabnzbd_restart').click(function(){
-      return confirm($(this).attr('rel'));
-    });
-    break;
-
-  case 'Servers':
-    $('form .testServer').click(function(event){ // test server
-      $(event.target).next('span').addClass('loading');
-      $.ajax({
-        type: "POST",
-        url: "../../api",
-        data: "mode=config&name=test_server&"+ $(event.target).parents('form:first').serialize() +"&apikey="+$('#apikey').val(),
-        success: function(msg){
-          alert(msg);
-          $(event.target).next('span').removeClass('loading');
-        }
-      });
-    });
-    $('form .delServer').click(function(event){ // delete server
-      if(confirm($(event.target).attr('rel')))
-        $(event.target).parents('form:first').attr('action','delServer').submit();
-      return false;
-    });
-    $('form .clrServer').click(function(event){ // clear server
-      if(confirm($(event.target).attr('rel')))
-        $(event.target).parents('form:first').attr('action','clrServer').submit();
-      return false;
-    });
-    break;
-
-  case 'Categories':
-    $(':button').click(function(event){ // delete category
-      window.location="delete/?name="+$(event.target).attr('name')+'&apikey='+apikey;
-    });
-    break;
-
-  case 'RSS':
-
-  $('.toggleFeedCheckbox').click(function(){  // enable/disable feed
-    window.onbeforeunload = null; // lose data?
-    this.form.action='toggle_rss_feed?apikey=$apikey';
-    this.form.submit();
-    return false;
-  });
-  $('.rssOrderSelect').change(function(){ // change filter order
-    window.onbeforeunload = null; // lose data?
-    location = this.options[this.selectedIndex].value;
-  });
-  break;
-
-  case 'Email':
-    $('#test_email').click(function(){
-      return confirm($('#test_email').attr('rel'));
-    });
-    break;
-
-  case 'Index Sites':
-    $('#getBookmarks').click(function(){ window.location='getBookmarks?apikey='+apikey; });
-    $('#hideBookmarks').click(function(){ window.location='hideBookmarks?apikey='+apikey; });
-    $('#showBookmarks').click(function(){ window.location='showBookmarks?apikey='+apikey; });
-    break;
-
-  case 'Sorting':
-    previewtv(); previewmovie(); previewdate(); // display sorting previews -- these functions are defined below
-    break;
-
-  };
-
-  // page's save button for those pages that use it
-  $('#save').click(function(){
-    window.onbeforeunload = null;
-    $('form').submit();
-  });
-
-}); // end Plush code