Translation & docs update

Godeps/Godeps.json

@@ -39,7 +39,7 @@
 		},
 		{
 			"ImportPath": "github.com/syncthing/protocol",
-			"Rev": "ebcdea63c07327a342f65415bbadc497462b8f1f"
+			"Rev": "388a29bbe21d8772ee4c29f4520aa8040309607d"
 		},
 		{
 			"ImportPath": "github.com/syndtr/goleveldb/leveldb",

Godeps/_workspace/src/github.com/syncthing/protocol/common_test.go

@@ -31,11 +31,11 @@ func (t *TestModel) Index(deviceID DeviceID, folder string, files []FileInfo, fl
 func (t *TestModel) IndexUpdate(deviceID DeviceID, folder string, files []FileInfo, flags uint32, options []Option) {
 }
 
-func (t *TestModel) Request(deviceID DeviceID, folder, name string, offset int64, size int, hash []byte, flags uint32, options []Option, buf []byte) error {
+func (t *TestModel) Request(deviceID DeviceID, folder, name string, offset int64, hash []byte, flags uint32, options []Option, buf []byte) error {
 	t.folder = folder
 	t.name = name
 	t.offset = offset
-	t.size = size
+	t.size = len(buf)
 	t.hash = hash
 	t.flags = flags
 	t.options = options

Godeps/_workspace/src/github.com/syncthing/protocol/fuzz.go

@@ -0,0 +1,70 @@
+// Copyright (C) 2015 The Protocol Authors.
+
+// +build gofuzz
+
+package protocol
+
+import (
+	"bytes"
+	"encoding/binary"
+	"encoding/hex"
+	"fmt"
+	"reflect"
+	"sync"
+)
+
+func Fuzz(data []byte) int {
+	// Regenerate the length, or we'll most commonly exit quickly due to an
+	// unexpected eof which is unintestering.
+	if len(data) > 8 {
+		binary.BigEndian.PutUint32(data[4:], uint32(len(data))-8)
+	}
+
+	// Setup a rawConnection we'll use to parse the message.
+	c := rawConnection{
+		cr:     &countingReader{Reader: bytes.NewReader(data)},
+		closed: make(chan struct{}),
+		pool: sync.Pool{
+			New: func() interface{} {
+				return make([]byte, BlockSize)
+			},
+		},
+	}
+
+	// Attempt to parse the message.
+	hdr, msg, err := c.readMessage()
+	if err != nil {
+		return 0
+	}
+
+	// If parsing worked, attempt to encode it again.
+	newBs, err := msg.AppendXDR(nil)
+	if err != nil {
+		panic("not encodable")
+	}
+
+	// Create an appriate header for the re-encoding.
+	newMsg := make([]byte, 8)
+	binary.BigEndian.PutUint32(newMsg, encodeHeader(hdr))
+	binary.BigEndian.PutUint32(newMsg[4:], uint32(len(newBs)))
+	newMsg = append(newMsg, newBs...)
+
+	// Use the rawConnection to parse the re-encoding.
+	c.cr = &countingReader{Reader: bytes.NewReader(newMsg)}
+	hdr2, msg2, err := c.readMessage()
+	if err != nil {
+		fmt.Println("Initial:\n" + hex.Dump(data))
+		fmt.Println("New:\n" + hex.Dump(newMsg))
+		panic("not parseable after re-encode: " + err.Error())
+	}
+
+	// Make sure the data is the same as it was before.
+	if hdr != hdr2 {
+		panic("headers differ")
+	}
+	if !reflect.DeepEqual(msg, msg2) {
+		panic("contents differ")
+	}
+
+	return 1
+}

Godeps/_workspace/src/github.com/syncthing/protocol/fuzz_test.go

@@ -0,0 +1,89 @@
+// Copyright (C) 2015 The Protocol Authors.
+
+// +build gofuzz
+
+package protocol
+
+import (
+	"encoding/binary"
+	"fmt"
+	"io/ioutil"
+	"os"
+	"strings"
+	"testing"
+	"testing/quick"
+)
+
+// This can be used to generate a corpus of valid messages as a starting point
+// for the fuzzer.
+func TestGenerateCorpus(t *testing.T) {
+	t.Skip("Use to generate initial corpus only")
+
+	n := 0
+	check := func(idx IndexMessage) bool {
+		for i := range idx.Options {
+			if len(idx.Options[i].Key) > 64 {
+				idx.Options[i].Key = idx.Options[i].Key[:64]
+			}
+		}
+		hdr := header{
+			version:     0,
+			msgID:       42,
+			msgType:     messageTypeIndex,
+			compression: false,
+		}
+
+		msgBs := idx.MustMarshalXDR()
+
+		buf := make([]byte, 8)
+		binary.BigEndian.PutUint32(buf, encodeHeader(hdr))
+		binary.BigEndian.PutUint32(buf[4:], uint32(len(msgBs)))
+		buf = append(buf, msgBs...)
+
+		ioutil.WriteFile(fmt.Sprintf("testdata/corpus/test-%03d.xdr", n), buf, 0644)
+		n++
+		return true
+	}
+
+	if err := quick.Check(check, &quick.Config{MaxCount: 1000}); err != nil {
+		t.Fatal(err)
+	}
+}
+
+// Tests any crashers found by the fuzzer, for closer investigation.
+func TestCrashers(t *testing.T) {
+	testFiles(t, "testdata/crashers")
+}
+
+// Tests the entire corpus, which should PASS before the fuzzer starts
+// fuzzing.
+func TestCorpus(t *testing.T) {
+	testFiles(t, "testdata/corpus")
+}
+
+func testFiles(t *testing.T, dir string) {
+	fd, err := os.Open(dir)
+	if err != nil {
+		t.Fatal(err)
+	}
+	crashers, err := fd.Readdirnames(-1)
+	if err != nil {
+		t.Fatal(err)
+	}
+	for _, name := range crashers {
+		if strings.HasSuffix(name, ".output") {
+			continue
+		}
+		if strings.HasSuffix(name, ".quoted") {
+			continue
+		}
+
+		t.Log(name)
+		crasher, err := ioutil.ReadFile(dir + "/" + name)
+		if err != nil {
+			t.Fatal(err)
+		}
+
+		Fuzz(crasher)
+	}
+}

Godeps/_workspace/src/github.com/syncthing/protocol/message.go

@@ -9,7 +9,7 @@ import "fmt"
 
 type IndexMessage struct {
 	Folder  string
-	Files   []FileInfo
+	Files   []FileInfo // max:1000000
 	Flags   uint32
 	Options []Option // max:64
 }
@@ -20,7 +20,7 @@ type FileInfo struct {
 	Modified     int64
 	Version      Vector
 	LocalVersion int64
-	Blocks       []BlockInfo
+	Blocks       []BlockInfo // max:1000000
 }
 
 func (f FileInfo) String() string {
@@ -109,9 +109,9 @@ type ResponseMessage struct {
 }
 
 type ClusterConfigMessage struct {
-	ClientName    string // max:64
-	ClientVersion string // max:64
-	Folders       []Folder
+	ClientName    string   // max:64
+	ClientVersion string   // max:64
+	Folders       []Folder // max:1000000
 	Options       []Option // max:64
 }
 
@@ -125,8 +125,8 @@ func (o *ClusterConfigMessage) GetOption(key string) string {
 }
 
 type Folder struct {
-	ID      string // max:64
-	Devices []Device
+	ID      string   // max:64
+	Devices []Device // max:1000000
 	Flags   uint32
 	Options []Option // max:64
 }

Godeps/_workspace/src/github.com/syncthing/protocol/message_xdr.go

@@ -42,7 +42,7 @@ IndexMessage Structure:
 
 struct IndexMessage {
 	string Folder<>;
-	FileInfo Files<>;
+	FileInfo Files<1000000>;
 	unsigned int Flags;
 	Option Options<64>;
 }
@@ -75,6 +75,9 @@ func (o IndexMessage) AppendXDR(bs []byte) ([]byte, error) {
 
 func (o IndexMessage) EncodeXDRInto(xw *xdr.Writer) (int, error) {
 	xw.WriteString(o.Folder)
+	if l := len(o.Files); l > 1000000 {
+		return xw.Tot(), xdr.ElementSizeExceeded("Files", l, 1000000)
+	}
 	xw.WriteUint32(uint32(len(o.Files)))
 	for i := range o.Files {
 		_, err := o.Files[i].EncodeXDRInto(xw)
@@ -111,7 +114,10 @@ func (o *IndexMessage) DecodeXDRFrom(xr *xdr.Reader) error {
 	o.Folder = xr.ReadString()
 	_FilesSize := int(xr.ReadUint32())
 	if _FilesSize < 0 {
-		return xdr.ElementSizeExceeded("Files", _FilesSize, 0)
+		return xdr.ElementSizeExceeded("Files", _FilesSize, 1000000)
+	}
+	if _FilesSize > 1000000 {
+		return xdr.ElementSizeExceeded("Files", _FilesSize, 1000000)
 	}
 	o.Files = make([]FileInfo, _FilesSize)
 	for i := range o.Files {
@@ -173,7 +179,7 @@ struct FileInfo {
 	hyper Modified;
 	Vector Version;
 	hyper LocalVersion;
-	BlockInfo Blocks<>;
+	BlockInfo Blocks<1000000>;
 }
 
 */
@@ -214,6 +220,9 @@ func (o FileInfo) EncodeXDRInto(xw *xdr.Writer) (int, error) {
 		return xw.Tot(), err
 	}
 	xw.WriteUint64(uint64(o.LocalVersion))
+	if l := len(o.Blocks); l > 1000000 {
+		return xw.Tot(), xdr.ElementSizeExceeded("Blocks", l, 1000000)
+	}
 	xw.WriteUint32(uint32(len(o.Blocks)))
 	for i := range o.Blocks {
 		_, err := o.Blocks[i].EncodeXDRInto(xw)
@@ -243,7 +252,10 @@ func (o *FileInfo) DecodeXDRFrom(xr *xdr.Reader) error {
 	o.LocalVersion = int64(xr.ReadUint64())
 	_BlocksSize := int(xr.ReadUint32())
 	if _BlocksSize < 0 {
-		return xdr.ElementSizeExceeded("Blocks", _BlocksSize, 0)
+		return xdr.ElementSizeExceeded("Blocks", _BlocksSize, 1000000)
+	}
+	if _BlocksSize > 1000000 {
+		return xdr.ElementSizeExceeded("Blocks", _BlocksSize, 1000000)
 	}
 	o.Blocks = make([]BlockInfo, _BlocksSize)
 	for i := range o.Blocks {
@@ -571,7 +583,7 @@ ClusterConfigMessage Structure:
 struct ClusterConfigMessage {
 	string ClientName<64>;
 	string ClientVersion<64>;
-	Folder Folders<>;
+	Folder Folders<1000000>;
 	Option Options<64>;
 }
 
@@ -610,6 +622,9 @@ func (o ClusterConfigMessage) EncodeXDRInto(xw *xdr.Writer) (int, error) {
 		return xw.Tot(), xdr.ElementSizeExceeded("ClientVersion", l, 64)
 	}
 	xw.WriteString(o.ClientVersion)
+	if l := len(o.Folders); l > 1000000 {
+		return xw.Tot(), xdr.ElementSizeExceeded("Folders", l, 1000000)
+	}
 	xw.WriteUint32(uint32(len(o.Folders)))
 	for i := range o.Folders {
 		_, err := o.Folders[i].EncodeXDRInto(xw)
@@ -646,7 +661,10 @@ func (o *ClusterConfigMessage) DecodeXDRFrom(xr *xdr.Reader) error {
 	o.ClientVersion = xr.ReadStringMax(64)
 	_FoldersSize := int(xr.ReadUint32())
 	if _FoldersSize < 0 {
-		return xdr.ElementSizeExceeded("Folders", _FoldersSize, 0)
+		return xdr.ElementSizeExceeded("Folders", _FoldersSize, 1000000)
+	}
+	if _FoldersSize > 1000000 {
+		return xdr.ElementSizeExceeded("Folders", _FoldersSize, 1000000)
 	}
 	o.Folders = make([]Folder, _FoldersSize)
 	for i := range o.Folders {
@@ -697,7 +715,7 @@ Folder Structure:
 
 struct Folder {
 	string ID<64>;
-	Device Devices<>;
+	Device Devices<1000000>;
 	unsigned int Flags;
 	Option Options<64>;
 }
@@ -733,6 +751,9 @@ func (o Folder) EncodeXDRInto(xw *xdr.Writer) (int, error) {
 		return xw.Tot(), xdr.ElementSizeExceeded("ID", l, 64)
 	}
 	xw.WriteString(o.ID)
+	if l := len(o.Devices); l > 1000000 {
+		return xw.Tot(), xdr.ElementSizeExceeded("Devices", l, 1000000)
+	}
 	xw.WriteUint32(uint32(len(o.Devices)))
 	for i := range o.Devices {
 		_, err := o.Devices[i].EncodeXDRInto(xw)
@@ -769,7 +790,10 @@ func (o *Folder) DecodeXDRFrom(xr *xdr.Reader) error {
 	o.ID = xr.ReadStringMax(64)
 	_DevicesSize := int(xr.ReadUint32())
 	if _DevicesSize < 0 {
-		return xdr.ElementSizeExceeded("Devices", _DevicesSize, 0)
+		return xdr.ElementSizeExceeded("Devices", _DevicesSize, 1000000)
+	}
+	if _DevicesSize > 1000000 {
+		return xdr.ElementSizeExceeded("Devices", _DevicesSize, 1000000)
 	}
 	o.Devices = make([]Device, _DevicesSize)
 	for i := range o.Devices {

Godeps/_workspace/src/github.com/syncthing/protocol/protocol.go

@@ -15,7 +15,11 @@ import (
 )
 
 const (
-	BlockSize = 128 * 1024
+	// Data block size (128 KiB)
+	BlockSize = 128 << 10
+
+	// We reject messages larger than this when encountered on the wire. (64 MiB)
+	MaxMessageLen = 64 << 20
 )
 
 const (
@@ -383,6 +387,11 @@ func (c *rawConnection) readMessage() (hdr header, msg encodable, err error) {
 		l.Debugf("read header %v (msglen=%d)", hdr, msglen)
 	}
 
+	if msglen > MaxMessageLen {
+		err = fmt.Errorf("message length %d exceeds maximum %d", msglen, MaxMessageLen)
+		return
+	}
+
 	if hdr.version != 0 {
 		err = fmt.Errorf("unknown protocol version 0x%x", hdr.version)
 		return
@@ -403,7 +412,7 @@ func (c *rawConnection) readMessage() (hdr header, msg encodable, err error) {
 	}
 
 	msgBuf := c.rdbuf0
-	if hdr.compression {
+	if hdr.compression && msglen > 0 {
 		c.rdbuf1 = c.rdbuf1[:cap(c.rdbuf1)]
 		c.rdbuf1, err = lz4.Decode(c.rdbuf1, c.rdbuf0)
 		if err != nil {

Godeps/_workspace/src/github.com/syncthing/protocol/vector_xdr.go

@@ -2,6 +2,8 @@
 
 package protocol
 
+import "github.com/calmh/xdr"
+
 // This stuff is hacked up manually because genxdr doesn't support 'type
 // Vector []Counter' declarations and it was tricky when I tried to add it...
 
@@ -28,6 +30,9 @@ func (v Vector) EncodeXDRInto(w xdrWriter) (int, error) {
 // DecodeXDRFrom decodes the XDR objects from the given reader into itself.
 func (v *Vector) DecodeXDRFrom(r xdrReader) error {
 	l := int(r.ReadUint32())
+	if l > 1e6 {
+		return xdr.ElementSizeExceeded("number of counters", l, 1e6)
+	}
 	n := make(Vector, l)
 	for i := range n {
 		n[i].ID = r.ReadUint64()

gui/assets/lang/lang-bg.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Промени папка",
     "Editing": "Променяне",
     "Enable UPnP": "Включи UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Въведи \"ip:port\" адреси разделени със запетая или \"dynamic\", за да извършиш автоматична връзка на адреси.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Въведи адреси разделени със запетая (\"tcp://ip:port\", \"tcp://host:port\") или \"dynamic\", за да извършиш автоматична връзка на адреси.",
     "Enter ignore patterns, one per line.": "Добави шаблони за игнориране, по един на ред.",
     "Error": "Грешка",
     "External File Versioning": "Външно упраление на версиите",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Бърз наръчник към поддържаните шаблони",
     "RAM Utilization": "RAM Натоварване",
     "Random": "Произволно",
+    "Relayed via": "Препратено през",
+    "Relays": "Препращачи",
     "Release Notes": "Бележки по обновяването",
     "Remove": "Премахни",
     "Rescan": "Повторно Сканиране",

gui/assets/lang/lang-ca.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Modificar carpeta",
     "Editing": "Modificant",
     "Enable UPnP": "Habilitat UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Introduir, separat per comes, adreces \"ip:port\" o \"dynamic\" per descobrir automàticament les adreces.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Introduex patrons a ignorar, un per línia.",
     "Error": "Error",
     "External File Versioning": "Versionat de fitxers extern",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Guia ràpida per als possibles patrons",
     "RAM Utilization": "Utilització de la RAM",
     "Random": "Aleatori",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "Notes de llançament",
     "Remove": "Remove",
     "Rescan": "Re-escanejar",

gui/assets/lang/lang-ca@valencia.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Editar carpeta",
     "Editing": "Editant",
     "Enable UPnP": "Activar UPnp",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Introduïr direccions separades per coma com \"ip:port\" o \"dynamic\" per a fer un descobriment automàtic de la direcció.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Introduïr patrons a ignorar, un per línia.",
     "Error": "Error",
     "External File Versioning": "Versionat extern de fitxers",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Guía ràpida de patrons suportats",
     "RAM Utilization": "Utilització de la RAM",
     "Random": "Aleatori",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "Notes de la versió",
     "Remove": "Remove",
     "Rescan": "Tornar a buscar",

gui/assets/lang/lang-cs.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Upravit adresář",
     "Editing": "Upravuje se",
     "Enable UPnP": "Povolit UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Vlož čárkou oddělené adresy \"ip:port\" nebo \"dynamic\" (pro automatické zjišťování adres). ",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Zadejte adresy oddělené čárkou (\"tcp://ip:port\", \"tcp://host:port\") nebo \"dynamic\" pro automatické zjišťování adres.",
     "Enter ignore patterns, one per line.": "Vložit ignorované vzory, jeden na řádek.",
     "Error": "Chyba",
     "External File Versioning": "Externí verzování souborů",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Rychlá nápověda k podporovaným vzorům",
     "RAM Utilization": "Využití RAM",
     "Random": "Náhodně",
+    "Relayed via": "Přenášené přes",
+    "Relays": "Přenašeče",
     "Release Notes": "Poznámky k vydání",
     "Remove": "Odstranit",
     "Rescan": "Opakovat skenování",

gui/assets/lang/lang-de.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Verzeichnis bearbeiten",
     "Editing": "Bearbeiten",
     "Enable UPnP": "UPnP aktivieren",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Trage durch ein Komma getrennte \"IP:Port\" Adressen oder \"dynamic\" ein, um die automatische Adresserkennung zu nutzen.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Geben Sie durch Komma getrennte Adressen an (\"tcp://ip:port\", \"tcp://host:port\") oder \"dynamic\", um die Adresse automatisch zu ermitteln.",
     "Enter ignore patterns, one per line.": "Geben Sie Ignoriermuster ein, eines pro Zeile.",
     "Error": "Fehler",
     "External File Versioning": "Externe Dateiversionierung",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Schnellanleitung zu den unterstützten Suchstrukturen",
     "RAM Utilization": "RAM Auslastung",
     "Random": "Zufall",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "Veröffentlichungsnotizen",
     "Remove": "Entfernen",
     "Rescan": "Neu scannen",

gui/assets/lang/lang-el.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Επεξεργασία φακέλου",
     "Editing": "Επεξεργασία σε εξέλιξη",
     "Enable UPnP": "Ενεργοποίηση UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Γράψε τις διευθύνσεις IP με τη μορφή «ip:θύρα», διαχωρισμένες με κόμμα. Αλλιώς γράψε «dynamic» για να πραγματοποιηθεί η αυτόματη εύρεση διευθύνσεων.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Δώσε τα πρότυπα που θα αγνοηθούν, ένα σε κάθε γραμμή.",
     "Error": "Σφάλμα",
     "External File Versioning": "Εξωτερική τήρηση εκδόσεων",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Σύντομη βοήθεια σχετικά με τα πρότυπα αναζήτησης που υποστηρίζονται",
     "RAM Utilization": "Επιβάρυνση RAM",
     "Random": "Τυχαία",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "Σημείωμα έκδοσης",
     "Remove": "Remove",
     "Rescan": "Έλεγξε για αλλαγές",

gui/assets/lang/lang-en-GB.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Edit Folder",
     "Editing": "Editing",
     "Enable UPnP": "Enable UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Enter ignore patterns, one per line.",
     "Error": "Error",
     "External File Versioning": "External File Versioning",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Quick guide to supported patterns",
     "RAM Utilization": "RAM Utilisation",
     "Random": "Random",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "Release Notes",
     "Remove": "Remove",
     "Rescan": "Rescan",

gui/assets/lang/lang-es-ES.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Editar repositorio",
     "Editing": "Editando",
     "Enable UPnP": "Habilitar UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Introduce las direcciones separadas por comas como \"ip:puerto\" o \"dynamic\" para el descubrimiento automático de la dirección.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Introducir patrones a ignorar, uno por línea.",
     "Error": "Error",
     "External File Versioning": "Versionado externo de fichero",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Guía rápida de patrones soportados",
     "RAM Utilization": "Uso de RAM",
     "Random": "Aleatorio",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "Notas de la versión",
     "Remove": "Remove",
     "Rescan": "Volver a buscar",

gui/assets/lang/lang-es.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Editar repositorio",
     "Editing": "Editando",
     "Enable UPnP": "Permitir UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Ingrese las direcciones \"ip:puerto\" separadas por coma, o \"dynamic\" para descubrir automáticamente las direcciones.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Añadir patrones de exclusión, uno por línea.",
     "Error": "Error",
     "External File Versioning": "Control de versiones externo",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Guía rápida sobre los patrones soportados",
     "RAM Utilization": "Utilización de RAM",
     "Random": "Aleatorio",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "Notas de lanzamiento",
     "Remove": "Remove",
     "Rescan": "Reescanear",

gui/assets/lang/lang-fi.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Muokkaa kansiota",
     "Editing": "Muokkaus",
     "Enable UPnP": "Ota UPnP käyttöön",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Syötä pilkuin erotettuna osoitteet muodossa \"ip:portti\" tai syötä \"dynamic\" automaattista osoitteiden selvitystä varten.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Syötä ohituslausekkeet, yksi riviä kohden.",
     "Error": "Virhe",
     "External File Versioning": "Ulkoinen tiedostoversionti",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Tuettujen lausekkeiden pikaohje",
     "RAM Utilization": "RAM:n käyttö",
     "Random": "Satunnaien",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "Release Notes",
     "Remove": "Remove",
     "Rescan": "Skannaa uudelleen",

gui/assets/lang/lang-fr-CA.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Éditer le répertoire",
     "Editing": "Édition",
     "Enable UPnP": "Activer l'UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Entrer les adresses \"ip:port\" séparées par une virgule ou \"dynamic\" afin d'activer la recherche automatique de l'adresse.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Entrer les adresses (\"tcp://ip:port\" ou \"tcp://host:port\") séparées par une virgule ou \"dynamic\" afin d'activer la recherche automatique de l'adresse.",
     "Enter ignore patterns, one per line.": "Entrer les masques de filtrage, un par ligne.",
     "Error": "Erreur",
     "External File Versioning": "Gestion externe des versions de fichiers",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Guide rapide des masques supportés",
     "RAM Utilization": "Utilisation de la RAM",
     "Random": "Aléatoire",
+    "Relayed via": "Relayée par",
+    "Relays": "Relais",
     "Release Notes": "Notes de version",
     "Remove": "Enlever",
     "Rescan": "Rescanner",

gui/assets/lang/lang-fr.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Éditer le répertoire",
     "Editing": "Édition",
     "Enable UPnP": "Activer l'UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Entrer les adresses \"ip:port\" séparées par une virgule ou \"dynamic\" afin d'activer la recherche automatique de l'adresse.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Entrer les adresses (\"tcp://ip:port\" ou \"tcp://host:port\") séparées par une virgule ou \"dynamic\" afin d'activer la recherche automatique de l'adresse.",
     "Enter ignore patterns, one per line.": "Entrer les masques de filtrage, un par ligne.",
     "Error": "Erreur",
     "External File Versioning": "Gestion externe des versions de fichiers",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Guide rapide des masques supportés",
     "RAM Utilization": "Utilisation de la RAM",
     "Random": "Aléatoire",
+    "Relayed via": "Relayée par",
+    "Relays": "Relais",
     "Release Notes": "Notes de version",
     "Remove": "Enlever",
     "Rescan": "Rescanner",

gui/assets/lang/lang-hu.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Mappa szerkesztése",
     "Editing": "Szerkesztés",
     "Enable UPnP": "UPnP engedélyezése",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Add meg a címeket (ip:port formátumban) vesszővel elválasztva vagy add meg a \"dynamic\" szót az a cím automatikus észleléséhez.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Figyelmen kívül hagyáshoz ide írhatod a mintákat, soronként egyet",
     "Error": "Hiba",
     "External File Versioning": "Külső fájl verziózás",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Rövid útmutató a használható mintákról",
     "RAM Utilization": "Memória használat",
     "Random": "Véletlenszerű",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "Kiadási megjegyzések",
     "Remove": "Remove",
     "Rescan": "Átnézés",

gui/assets/lang/lang-it.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Modifica Cartella",
     "Editing": "Modifica di",
     "Enable UPnP": "Attiva UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Inserisci gli indirizzi \"ip:porta\" separati da una virgola, altrimenti inserisci \"dynamic\" per effettuare il rilevamento automatico dell'indirizzo.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Inserisci gli schemi di esclusione, uno per riga.",
     "Error": "Errore",
     "External File Versioning": "Controllo Versione Esterno",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Guida veloce agli schemi supportati",
     "RAM Utilization": "Utilizzo RAM",
     "Random": "Casuale",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "Note di rilascio",
     "Remove": "Remove",
     "Rescan": "Riscansiona",

gui/assets/lang/lang-ja.json

@@ -49,7 +49,7 @@
     "Edit Folder": "フォルダーの編集",
     "Editing": "編集中",
     "Enable UPnP": "UPnPを有効にする",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "「IPアドレス:ポート」をコンマで区切って入力してください。自動探索を行う場合は「dynamic」と入力してください。",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "アドレスを指定する場合は「tcp://IPアドレス:ポート」または「tcp://ホスト名:ポート」をコンマで区切って入力してください。自動探索を行う場合は「dynamic」と入力してください。",
     "Enter ignore patterns, one per line.": "無視するファイル名のパターンを、一行につき一条件で入力してください。",
     "Error": "エラー",
     "External File Versioning": "外部バージョン管理",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "サポートされているパターンの簡易ガイド",
     "RAM Utilization": "メモリ使用量",
     "Random": "ランダム",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "リリースノート",
     "Remove": "除去",
     "Rescan": "再スキャン",
@@ -166,7 +168,7 @@
     "The aggregated statistics are publicly available at {%url%}.": "集計結果は {{url}} でどなたでもご覧いただけます。",
     "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "設定が保存されましたが、まだ有効になっていません。新しい設定を有効にするにはSyncthingを再起動してください。",
     "The device ID cannot be blank.": "デバイスIDは空欄にできません。",
-    "The device ID to enter here can be found in the \"Edit > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "ここに入力するデバイスIDは、接続したいデバイスの \"メニュー > IDを表示\" で確認することができます。スペースとハイフンは入力しなくてもかまいません。",
+    "The device ID to enter here can be found in the \"Edit > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "ここに入力するデバイスIDは、接続したい相手側デバイスの [メニュー]→[IDを表示] で確認することができます。スペースとハイフンは入力しなくてもかまいません。",
     "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "利用状況レポートは暗号化されて毎日送信されます。この情報はプラットフォーム、フォルダの大きさ、アプリのバージョンを調査するために使われます。レポートのデータが変更された場合、このダイアログがまた表示されます。",
     "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "入力されたデバイスIDが正しくありません。デバイスIDは、52文字または56文字のアルファベットと数字からなる文字列です。スペースとハイフンは入力してもしなくてもかまいません。",
     "The first command line parameter is the folder path and the second parameter is the relative path in the folder.": "第1コマンドライン引数はフォルダーのパス、第2引数はフォルダー内の相対パスです。",
@@ -203,7 +205,7 @@
     "Version": "バージョン",
     "Versions Path": "古いバージョンを保存するパス",
     "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "古いバージョンは、最大寿命もしくは期間ごとの最大保存数を超えた場合、自動的に削除されます。",
-    "When adding a new device, keep in mind that this device must be added on the other side too.": "新しいデバイスを追加する際、そのデバイスにもこのデバイスを追加する必要があることに留意してください。",
+    "When adding a new device, keep in mind that this device must be added on the other side too.": "新しいデバイスを追加する際は、相手側のデバイスにもこのデバイスを追加する必要があることに留意してください。",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "新しいフォルダーを追加する際、フォルダーIDはデバイス間でフォルダーの対応づけに使われることに注意してください。フォルダーIDは大文字と小文字が区別され、共有するすべてのデバイスの間で完全に一致しなくてはなりません。",
     "Yes": "はい",
     "You must keep at least one version.": "少なくとも一つのバージョンを保存してください。",

gui/assets/lang/lang-ko-KR.json

@@ -49,7 +49,7 @@
     "Edit Folder": "폴더 편집",
     "Editing": "편집",
     "Enable UPnP": "UPnP 활성화",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "주소 자동 검색을 하기 위해서는 \"ip:port\" 형식의 주소들을 쉽표로 구분해서 입력하거나 \"dynamic\"을 입력하세요.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "무시할 패턴을 한 줄에 하나씩 입력하세요.",
     "Error": "오류",
     "External File Versioning": "외부 파일 버전 관리",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "지원하는 패턴에 대한 빠른 도움말",
     "RAM Utilization": "RAM 사용량",
     "Random": "무작위",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "릴리즈 노트",
     "Remove": "Remove",
     "Rescan": "재탐색",

gui/assets/lang/lang-lt.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Keisti aplanką",
     "Editing": "Redagavimas",
     "Enable UPnP": "Įjungti UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Įveskite dvitaškiu atskirtą \"ip:port\" adresą arba žodį \"dynamic\" norėdami gauti adresą automatiškai",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Suveskite nepaisomus šablonus, kiekvieną naujoje eilutėje.",
     "Error": "Klaida",
     "External File Versioning": "Išorinis versijų valdymas",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Trumpas leistinų šablonų vadovas",
     "RAM Utilization": "Atminties naudojimas",
     "Random": "Atsitiktinė",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "Laidos Informacija",
     "Remove": "Pašalinti",
     "Rescan": "Nuskaityti iš naujo",

gui/assets/lang/lang-nb.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Rediger Mappe",
     "Editing": "Redigerer",
     "Enable UPnP": "Aktiver UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": " Skriv inn kommaseparerte \"ip:port\"-adresser, eller \"dynamic\" for å automatisk finne adressen.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Skriv inn mønster som skal utelates, ett per linje.",
     "Error": "Feilmelding",
     "External File Versioning": "Ekstern versjonskontroll",
@@ -119,7 +119,9 @@
     "Preview Usage Report": "Forhåndsvisning Av Datainnsamling",
     "Quick guide to supported patterns": "Kjapp innføring i godkjente mønster",
     "RAM Utilization": "RAM-utnyttelse",
-    "Random": "TIlfeldig",
+    "Random": "Tilfeldig",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "Utgivelsesnotat",
     "Remove": "Fjern",
     "Rescan": "Skann på nytt",

gui/assets/lang/lang-nl.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Bewerk map",
     "Editing": "Bezig met bewerken",
     "Enable UPnP": "UPnP gebruiken",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Geef, gescheiden door komma's, \"ip:port\" adressen of \"dynamic\" voor het automatische vinden van de addressen.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Voer door komma's gescheiden (\"tcp://ip:port\", \"tcp://host:port\") adressen of \"dynamisch\" in om automatische ontdekking van het adres uit te voeren.",
     "Enter ignore patterns, one per line.": "Voer negeerpatronen in, één per regel.",
     "Error": "Fout",
     "External File Versioning": "Extern versiebeheer voor bestanden",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Snelgids voor ondersteunde patronen",
     "RAM Utilization": "Geheugengebruik",
     "Random": "Willekeurig",
+    "Relayed via": "Doorgestuurd via",
+    "Relays": "Relais",
     "Release Notes": "Release notes",
     "Remove": "Verwijderen",
     "Rescan": "Opnieuw scannen",

gui/assets/lang/lang-nn.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Rediger Mappe",
     "Editing": "Redigerer",
     "Enable UPnP": "Aktiver UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Skriv inn \"ip:port\"-adresser med komma mellom kvar adresse, eller \"dynamic\" for å automatisk søkja opp adressa.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Skriv inn mønster som skal utelatast, eitt per linje.",
     "Error": "Feilmelding",
     "External File Versioning": "Ekstern filutgåvehandtering",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Kjapp innføring i godkjente mønster",
     "RAM Utilization": "Minnebruk",
     "Random": "Tilfeldig",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "Release Notes",
     "Remove": "Remove",
     "Rescan": "Skann På Ny",

gui/assets/lang/lang-pl.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Edytuj folder",
     "Editing": "Edytowanie",
     "Enable UPnP": "Włącz UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Wprowadź adresy oddzielone przecinkiem \"ip:port\", lub wpisz \"dynamic\" w celu wykrycia adresu. ",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Wprowadz wzorce ignorowania, jeden w każdej linii.",
     "Error": "Błąd",
     "External File Versioning": "Zewnętrzne wersjonowanie pliku",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Krótki przewodnik po obsługiwanych wzorcach",
     "RAM Utilization": "Użycie pamięci RAM",
     "Random": "Losowo",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "Informacje o wydaniu",
     "Remove": "Remove",
     "Rescan": "Skanuj ponownie",

gui/assets/lang/lang-pt-BR.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Editar pasta",
     "Editing": "Editando",
     "Enable UPnP": "Habilitar UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Insira endereços \"ip:porta\" separados por vírgulas ou \"dynamic\" para descobrir automaticamente o endereço.\n",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Insira endereços (\"tcp://ip:porta\", \"tcp://host:porta\") separados por vírgula ou \"dynamic\" para executar a descoberta automática de endereço.",
     "Enter ignore patterns, one per line.": "Insira os padrões de exclusão, um por linha.",
     "Error": "Erro",
     "External File Versioning": "Versionamento externo de arquivo",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Guia rápido dos padrões suportados",
     "RAM Utilization": "Uso de RAM",
     "Random": "Aleatória",
+    "Relayed via": "Retransmitido via",
+    "Relays": "Retransmissores",
     "Release Notes": "Notas de lançamento",
     "Remove": "Remover",
     "Rescan": "Verificar agora",

gui/assets/lang/lang-pt-PT.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Editar pasta",
     "Editing": "Editando",
     "Enable UPnP": "Activar UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Introduza endereços \"ip:porto\" separados por vírgulas ou \"dynamic\" para descobrir automaticamente o endereço.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Introduza endereços separados por vírgulas (\"tcp://ip:porto\", \"tcp://máquina:porto\") ou \"dynamic\" para descobrir automaticamente os endereços.",
     "Enter ignore patterns, one per line.": "Escreva os padrões de exclusão, um por linha.",
     "Error": "Erro",
     "External File Versioning": "Externa",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Guia rápido dos padrões suportados",
     "RAM Utilization": "Utilização da RAM",
     "Random": "Aleatória",
+    "Relayed via": "Transmitido via",
+    "Relays": "Transmissores",
     "Release Notes": "Notas de lançamento",
     "Remove": "Remover",
     "Rescan": "Verificar agora",

gui/assets/lang/lang-ro-RO.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Modifică Mapa",
     "Editing": "Modificare",
     "Enable UPnP": "Activează UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Adaugă, separate prin virgulă, adresele IP \"ip:port\" sau \"dynamic\" (dinamic) pentru ca adresele să fie descoperite automat.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Adaugă șabloanele de ignorare, câte una pe linie.",
     "Error": "Eroare",
     "External File Versioning": "Administrare externă a versiunilor documentului",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Ghid rapid pentru regulile suportate",
     "RAM Utilization": "RAM",
     "Random": "Random",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "Release Notes",
     "Remove": "Remove",
     "Rescan": "Rescanează",

gui/assets/lang/lang-ru.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Изменить папку",
     "Editing": "Редактирование",
     "Enable UPnP": "Включить UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": " Введите пары \"IP:PORT\" разделённые запятыми, или слово \"dynamic\" для автоматического обнаружения адреса.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Введите шаблоны игнорирования, по одному на строку.",
     "Error": "Ошибка",
     "External File Versioning": "Внешний контроль версий файлов",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Краткое руководство по поддерживаемым шаблонам",
     "RAM Utilization": "Использование ОЗУ",
     "Random": "Случайно",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "Замечания к версии",
     "Remove": "Удалить",
     "Rescan": "Пересканирование",

gui/assets/lang/lang-sv.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Redigera katalog",
     "Editing": "Redigerar",
     "Enable UPnP": "Använd UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Ange kommaseparerade \"ip:port\"-adresser eller ordet \"dynamic\" för att använda automatisk uppslagning.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Ange filmönster, ett per rad.",
     "Error": "Fel",
     "External File Versioning": "Extern versionshantering",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Snabb guide till filmönster som stöds",
     "RAM Utilization": "Minnesanvändning",
     "Random": "Slumpmässig",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "versionsnyheter",
     "Remove": "Remove",
     "Rescan": "Uppdatera",

gui/assets/lang/lang-tr.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Klasör Düzenle",
     "Editing": "Düzenleniyor",
     "Enable UPnP": "UPnP Etkinleştir",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "IP adresleri eklemek için virgül ile ayırarak \"ip:port\" yazın, ya da \"dynamic\" yazarak otomatik bulma işlemini seçin.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Yoksayılacak kalıp dizilerini her satıra bir tane olacak şekilde girin.",
     "Error": "Hata",
     "External File Versioning": "Harici Dosya Sürümlendirme",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Desteklenen kalıplar için hızlı rehber",
     "RAM Utilization": "RAM Kullanımı",
     "Random": "Random",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "Release Notes",
     "Remove": "Remove",
     "Rescan": "Tekrar Tara",

gui/assets/lang/lang-uk.json

@@ -49,7 +49,7 @@
     "Edit Folder": "Редагувати директорію",
     "Editing": "Редагування",
     "Enable UPnP": "Увімкнути UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "Уведіть адреси \"ip:port\" розділені комою, або слово \"dynamic\" для здійснення автоматичного виявлення адреси.",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "Введіть шаблони ігнорування, по одному на рядок.",
     "Error": "Помилка",
     "External File Versioning": "Зовнішне керування версіями",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "Швидкий посібник по шаблонам, що підтримуються",
     "RAM Utilization": "Використання RAM",
     "Random": "Випадково",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "Примітки до випуску",
     "Remove": "Remove",
     "Rescan": "Пересканувати",

gui/assets/lang/lang-zh-CN.json

@@ -49,7 +49,7 @@
     "Edit Folder": "编辑文件夹选项",
     "Editing": "正在编辑",
     "Enable UPnP": "开启UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "输入以半角逗号分隔的\"ip:端口\"设置可用地址列表，或者输入\"dynamic\"表示自动寻找地址。",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "输入以半角逗号分隔的 \"tcp://IP地址:端口号\", \"tcp://主机:端口号\" 设置可用地址列表，或者输入\"dynamic\"表示自动寻找地址。",
     "Enter ignore patterns, one per line.": "请输入忽略表达式，每行一条",
     "Error": "错误",
     "External File Versioning": "外部版本控制",
@@ -120,6 +120,8 @@
     "Quick guide to supported patterns": "支持的通配符的简单教程：",
     "RAM Utilization": "内存使用量",
     "Random": "随机顺序",
+    "Relayed via": "Relayed via",
+    "Relays": "Relays",
     "Release Notes": "发布说明",
     "Remove": "移除",
     "Rescan": "重新扫描",

gui/assets/lang/lang-zh-TW.json

@@ -33,7 +33,7 @@
     "Copied from original": "Copied from original",
     "Copyright © 2015 the following Contributors:": "Copyright © 2015 下列貢獻者：",
     "Delete": "刪除",
-    "Deleted": "Deleted",
+    "Deleted": "已刪除",
     "Device ID": "裝置識別碼",
     "Device Identification": "裝置識別",
     "Device Name": "裝置名稱",
@@ -49,7 +49,7 @@
     "Edit Folder": "編輯資料夾",
     "Editing": "正在編輯",
     "Enable UPnP": "啟用 UPnP",
-    "Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "輸入以半形逗號區隔的 \"ip:連接埠\" 位址，或著輸入 \"dynamic\" 以進行位址的自動探索",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
     "Enter ignore patterns, one per line.": "輸入忽略樣式，每行一種。",
     "Error": "錯誤",
     "External File Versioning": "外部檔案版本控制",
@@ -60,7 +60,7 @@
     "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Files are moved to .stversions folder when replaced or deleted by Syncthing.",
     "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.",
     "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "其他裝置做的改變不會影響到此裝置的檔案，但在此裝置上的變化將被發送到叢集中的其他部分。",
-    "Folder": "Folder",
+    "Folder": "資料夾",
     "Folder ID": "資料夾識別碼",
     "Folder Master": "主資料夾",
     "Folder Path": "資料夾路徑",
@@ -74,7 +74,7 @@
     "Global Discovery Server": "全域探索伺服器",
     "Global State": "全域狀態",
     "Help": "說明",
-    "Home page": "Home page",
+    "Home page": "首頁",
     "Ignore": "忽略",
     "Ignore Patterns": "忽略樣式",
     "Ignore Permissions": "忽略權限",
@@ -106,7 +106,7 @@
     "OK": "確定",
     "Off": "關閉",
     "Oldest First": "最舊的優先",
-    "Options": "Options",
+    "Options": "選項",
     "Out of Sync": "Out of Sync",
     "Out of Sync Items": "不同步物件",
     "Outgoing Rate Limit (KiB/s)": "連出速率限制 (KiB/s)",
@@ -120,8 +120,10 @@
     "Quick guide to supported patterns": "可支援樣式的快速指南",
     "RAM Utilization": "記憶體使用",
     "Random": "隨機",
+    "Relayed via": "Relayed via",
+    "Relays": "中繼點",
     "Release Notes": "版本資訊",
-    "Remove": "Remove",
+    "Remove": "移除",
     "Rescan": "重新掃描",
     "Rescan All": "全部重新掃描",
     "Rescan Interval": "重新掃描間隔",
@@ -152,7 +154,7 @@
     "Source Code": "原始碼",
     "Staggered File Versioning": "變動式檔案版本控制",
     "Start Browser": "啟動瀏覽器",
-    "Statistics": "Statistics",
+    "Statistics": "統計",
     "Stopped": "已停止",
     "Support": "支援",
     "Sync Protocol Listen Addresses": "同步通訊協定監聽位址",
@@ -193,7 +195,7 @@
     "Unshared": "未共享",
     "Unused": "未使用",
     "Up to Date": "最新",
-    "Updated": "Updated",
+    "Updated": "已更新",
     "Upgrade": "升級",
     "Upgrade To {%version%}": "升級至 {{version}}",
     "Upgrading": "正在升級",

man/syncthing-config.5

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-CONFIG" "5" "August 13, 2015" "v0.11" "Syncthing"
+.TH "SYNCTHING-CONFIG" "5" "August 20, 2015" "v0.11" "Syncthing"
 .SH NAME
 syncthing-config \- Syncthing Configuration
 .

man/syncthing-device-ids.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-DEVICE-IDS" "7" "August 13, 2015" "v0.11" "Syncthing"
+.TH "SYNCTHING-DEVICE-IDS" "7" "August 20, 2015" "v0.11" "Syncthing"
 .SH NAME
 syncthing-device-ids \- Understanding Device IDs
 .

man/syncthing-event-api.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-EVENT-API" "7" "August 13, 2015" "v0.11" "Syncthing"
+.TH "SYNCTHING-EVENT-API" "7" "August 20, 2015" "v0.11" "Syncthing"
 .SH NAME
 syncthing-event-api \- Event API
 .

man/syncthing-faq.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-FAQ" "7" "August 13, 2015" "v0.11" "Syncthing"
+.TH "SYNCTHING-FAQ" "7" "August 20, 2015" "v0.11" "Syncthing"
 .SH NAME
 syncthing-faq \- Frequently Asked Questions
 .

man/syncthing-networking.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-NETWORKING" "7" "August 13, 2015" "v0.11" "Syncthing"
+.TH "SYNCTHING-NETWORKING" "7" "August 20, 2015" "v0.11" "Syncthing"
 .SH NAME
 syncthing-networking \- Firewall Setup
 .

man/syncthing-rest-api.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-REST-API" "7" "August 13, 2015" "v0.11" "Syncthing"
+.TH "SYNCTHING-REST-API" "7" "August 20, 2015" "v0.11" "Syncthing"
 .SH NAME
 syncthing-rest-api \- REST API
 .

man/syncthing-security.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-SECURITY" "7" "August 13, 2015" "v0.11" "Syncthing"
+.TH "SYNCTHING-SECURITY" "7" "August 20, 2015" "v0.11" "Syncthing"
 .SH NAME
 syncthing-security \- Security Principles
 .

man/syncthing-stignore.5

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-STIGNORE" "5" "August 13, 2015" "v0.11" "Syncthing"
+.TH "SYNCTHING-STIGNORE" "5" "August 20, 2015" "v0.11" "Syncthing"
 .SH NAME
 syncthing-stignore \- Prevent files from being synchronized to other nodes
 .

man/syncthing-versioning.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "TODO" "7" "August 13, 2015" "v0.11" "Syncthing"
+.TH "TODO" "7" "August 20, 2015" "v0.11" "Syncthing"
 .SH NAME
 Todo \- Keep automatic backups of deleted files by other nodes
 .

man/syncthing.1

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING" "1" "August 13, 2015" "v0.11" "Syncthing"
+.TH "SYNCTHING" "1" "August 20, 2015" "v0.11" "Syncthing"
 .SH NAME
 syncthing \- Syncthing
 .