mirror of
https://github.com/meshtastic/firmware.git
synced 2026-03-29 04:23:08 -04:00
2aefd386b6
* Fix RAK4631 Ethernet gateway API connection loss after W5100S brownout PoE power instability can brownout the W5100S while the nRF52 MCU keeps running, causing all chip registers (MAC, IP, sockets) to revert to defaults. The firmware had no mechanism to detect or recover from this. Changes: - Detect W5100S chip reset by periodically verifying MAC address register in reconnectETH(); on mismatch, perform full hardware reset and re-initialize Ethernet interface and services - Add deInitApiServer() for clean API server teardown during recovery - Add ~APIServerPort destructor to prevent memory leaks - Switch nRF52 from EthernetServer::available() to accept() to prevent the same connected client from being repeatedly re-reported - Add proactive dead-connection cleanup in APIServerPort::runOnce() - Add 15-minute TCP idle timeout to close half-open connections that consume limited W5100S hardware sockets Fixes meshtastic/firmware#6970 Made-with: Cursor * Log actual elapsed idle time instead of constant timeout value Address Copilot review comment: log millis() - lastContactMsec to show the real time since last client activity, rather than always logging the TCP_IDLE_TIMEOUT_MS constant. Made-with: Cursor * Update src/mesh/api/ServerAPI.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Stop UDP multicast handler during W5100S brownout recovery After a W5100S chip brownout, the udpHandler isRunning flag stays true while the underlying socket is dead. Without calling stop(), the subsequent start() no-ops and multicast is silently broken after recovery. Made-with: Cursor * Address Copilot review: recovery flags and timeout constant Move ethStartupComplete and ntp_renew reset to immediately after service teardown, before Ethernet.begin(). Previously, if DHCP failed the early return left ethStartupComplete=true, preventing service re-initialization on subsequent retries. Replace #define TCP_IDLE_TIMEOUT_MS with static constexpr uint32_t for type safety and better C++ practice. Made-with: Cursor --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Meshtastic Firmware
Overview
This repository contains the official device firmware for Meshtastic, an open-source LoRa mesh networking project designed for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware supports various hardware platforms, including ESP32, nRF52, RP2040/RP2350, and Linux-based devices.
Meshtastic enables text messaging, location sharing, and telemetry over a decentralized mesh network, making it ideal for outdoor adventures, emergency preparedness, and remote operations.
Get Started
- 🔧 Building Instructions – Learn how to compile the firmware from source.
- ⚡ Flashing Instructions – Install or update the firmware on your device.
Join our community and help improve Meshtastic! 🚀
Stats
