mirror of
https://github.com/meshtastic/firmware.git
synced 2026-04-03 23:13:08 -04:00
5319bc7c2c
The W5100S Ethernet chip has only 4 hardware sockets. On RAK4631 Ethernet gateways with syslog and NTP enabled, all 4 sockets were permanently consumed (NTP UDP + Syslog UDP + TCP API listener + TCP API client), leaving none for MQTT, DHCP lease renewal, or additional TCP connections. - NTP: Remove permanent timeClient.begin() at startup; NTPClient::update() auto-initializes when needed. Add timeClient.end() after each query to release the UDP socket immediately. - Syslog: Remove socket allocation from Syslog::enable(). Open and close the UDP socket on-demand in _sendLog() around each message send. - MQTT: Fix socket leak in isValidConfig() where a successful test connection was never closed (PubSubClient destructor does not call disconnect). Add explicit pubSub->disconnect() before returning. Made-with: Cursor Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Meshtastic Firmware
Overview
This repository contains the official device firmware for Meshtastic, an open-source LoRa mesh networking project designed for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware supports various hardware platforms, including ESP32, nRF52, RP2040/RP2350, and Linux-based devices.
Meshtastic enables text messaging, location sharing, and telemetry over a decentralized mesh network, making it ideal for outdoor adventures, emergency preparedness, and remote operations.
Get Started
- 🔧 Building Instructions – Learn how to compile the firmware from source.
- ⚡ Flashing Instructions – Install or update the firmware on your device.
Join our community and help improve Meshtastic! 🚀
Stats
