Thomas Göttgens afdaccc25f Makerfabs nomad terminal (#12112) ...

* Add Makerfabs Nomad Terminal variant

* Configure external power detect pins before probing battery gauges

* TFTDisplay: add ILI9488 reset pin and colour inversion options

* Makerfabs Nomad Terminal: add BaseUI env, early power latch, soft-start LCD/GPS rail, GPS wake

* I2C scan: tell FocalTech touch from AHT10 at 0x38 and BMM150 from VEML7700 at 0x10

* Run a BMM150 next to an IMU on the magnetometer thread

* Makerfabs Nomad Terminal: BaseUI touch

* BMM150: add hard/soft-iron calibration, read at 10 Hz

* Makerfabs Nomad Terminal: fix MUI build, restart Wire after MUI touch init

* BMM150: seed calibration from the first valid sample

* Makerfabs Nomad Terminal: combined BaseUI+MUI -tft firmware, SD defines in build flags

* Makerfabs Nomad Terminal: reset touch controller at init, wake touch thread on INT

* BMM150: poll every 200 ms

* Makerfabs Nomad Terminal: scale CW2015 SOC to the on-USB full reading

* BMM150: end an expired calibration when the sample is rejected

2026-10-14 15:18:24 +00:00

..

einkScan.h

Revert "add a .clang-format file (#9154)" (#9172)

2026-01-04 05:15:53 -06:00

LoRaRadioType.h

LR2021 radio on NRF_Promicro (#10401)

2026-05-07 20:24:39 -05:00

ReClockI2C.h

I2C reclock guard - avoid gazillion calls to reclock on SENXX sensors (#11412)

2026-08-16 11:58:59 +00:00

ScanI2C.cpp

Makerfabs nomad terminal (#12112)

2026-10-14 15:18:24 +00:00

ScanI2C.h

feat: Support Seeed Wio Tracker L2 (#10909)

2026-08-28 23:30:27 +00:00

ScanI2CConsumer.cpp

Revert "add a .clang-format file (#9154)" (#9172)

2026-01-04 05:15:53 -06:00

ScanI2CConsumer.h

Revert "add a .clang-format file (#9154)" (#9172)

2026-01-04 05:15:53 -06:00

ScanI2CTwoWire.cpp

Makerfabs nomad terminal (#12112)

2026-10-14 15:18:24 +00:00

ScanI2CTwoWire.h

fix(detect): check LPS22HB before SFA30 at 0x5D and CRC-validate SFA30 probe (#11881)

2026-09-18 12:19:37 +00:00