Preparing for release of 2.6.4

did in older versions.
- Added a comment for log_format_has().

.cvsignore

@@ -21,3 +21,5 @@ tls
 trimslash
 t_unsafe
 wildtest
+getfsdev
+.rsync-filter

Makefile.in

@@ -41,14 +41,14 @@ popt_OBJS=popt/findme.o  popt/popt.o  popt/poptconfig.o \
 	popt/popthelp.o popt/poptparse.o
 OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(DAEMON_OBJ) $(LIBOBJ) $(ZLIBOBJ) @BUILD_POPT@
 
-TLS_OBJ = tls.o syscall.o lib/permstring.o
+TLS_OBJ = tls.o syscall.o lib/compat.o lib/snprintf.o lib/permstring.o
 
 # Programs we must have to run the test cases
-CHECK_PROGS = rsync$(EXEEXT) tls$(EXEEXT) getgroups$(EXEEXT) \
+CHECK_PROGS = rsync$(EXEEXT) tls$(EXEEXT) getgroups$(EXEEXT) getfsdev$(EXEEXT) \
 	trimslash$(EXEEXT) t_unsafe$(EXEEXT) wildtest$(EXEEXT)
 
 # Objects for CHECK_PROGS to clean
-CHECK_OBJS=getgroups.o t_stub.o t_unsafe.o trimslash.o wildtest.o
+CHECK_OBJS=getgroups.o getfsdev.o t_stub.o t_unsafe.o trimslash.o wildtest.o
 
 # note that the -I. is needed to handle config.h when using VPATH
 .c.o:
@@ -58,18 +58,16 @@ CHECK_OBJS=getgroups.o t_stub.o t_unsafe.o trimslash.o wildtest.o
 
 all: rsync$(EXEEXT)
 
-man: rsync.1 rsyncd.conf.5
-
 install: all
 	-mkdir -p ${DESTDIR}${bindir}
-	${INSTALLCMD} ${STRIP} -m 755 rsync$(EXEEXT) ${DESTDIR}${bindir}
+	${INSTALLCMD} ${INSTALL_STRIP} -m 755 rsync$(EXEEXT) ${DESTDIR}${bindir}
 	-mkdir -p ${DESTDIR}${mandir}/man1
 	-mkdir -p ${DESTDIR}${mandir}/man5
 	${INSTALLMAN} -m 644 $(srcdir)/rsync.1 ${DESTDIR}${mandir}/man1
 	${INSTALLMAN} -m 644 $(srcdir)/rsyncd.conf.5 ${DESTDIR}${mandir}/man5
 
 install-strip:
-	$(MAKE) STRIP='-s' install
+	$(MAKE) INSTALL_STRIP='-s' install
 
 rsync$(EXEEXT): $(OBJS)
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
@@ -82,7 +80,10 @@ tls$(EXEEXT): $(TLS_OBJ)
 getgroups$(EXEEXT): getgroups.o
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getgroups.o $(LIBS)
 
-TRIMSLASH_OBJ = trimslash.o syscall.o
+getfsdev$(EXEEXT): getfsdev.o
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getfsdev.o $(LIBS)
+
+TRIMSLASH_OBJ = trimslash.o syscall.o lib/compat.o lib/snprintf.o
 trimslash$(EXEEXT): $(TRIMSLASH_OBJ)
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TRIMSLASH_OBJ) $(LIBS)
 
@@ -90,17 +91,15 @@ T_UNSAFE_OBJ = t_unsafe.o syscall.o util.o t_stub.o lib/compat.o lib/snprintf.o
 t_unsafe$(EXEEXT): $(T_UNSAFE_OBJ)
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(T_UNSAFE_OBJ) $(LIBS)
 
-# I don't like these rules because CVS can skew the timestamps and
-# produce spurious warnings, and also make "make install" fail if the
-# source directory can no longer be found.  Since we don't rebuild
-# automatically they're kind of lame anyhow.
+gen: $(srcdir)/configure $(srcdir)/config.h.in proto man
 
-#Makefile: Makefile.in configure config.status
-#	echo "WARNING: You need to run ./config.status --recheck"
+man: $(srcdir)/rsync.1 $(srcdir)/rsyncd.conf.5
 
-# don't actually run autoconf, just issue a warning
-#configure: configure.in
-#	echo "WARNING: you need to rerun autoconf"
+$(srcdir)/configure: $(srcdir)/configure.in $(srcdir)/aclocal.m4
+	cd $(srcdir); autoconf
+
+$(srcdir)/config.h.in: $(srcdir)/configure.in $(srcdir)/aclocal.m4
+	cd $(srcdir); autoheader
 
 $(srcdir)/rsync.1: $(srcdir)/rsync.yo
 	yodl2man -o $(srcdir)/rsync.1 $(srcdir)/rsync.yo
@@ -109,7 +108,12 @@ $(srcdir)/rsyncd.conf.5: $(srcdir)/rsyncd.conf.yo
 	yodl2man -o $(srcdir)/rsyncd.conf.5 $(srcdir)/rsyncd.conf.yo
 
 proto:
-	cat $(srcdir)/*.c $(srcdir)/lib/compat.c | awk -f $(srcdir)/mkproto.awk > $(srcdir)/proto.h
+	cat $(srcdir)/*.c $(srcdir)/lib/compat.c | awk -f $(srcdir)/mkproto.awk >$(srcdir)/proto.h.new
+	if diff $(srcdir)/proto.h $(srcdir)/proto.h.new >/dev/null; then \
+	  rm $(srcdir)/proto.h.new; \
+	else \
+	  mv $(srcdir)/proto.h.new $(srcdir)/proto.h; \
+	fi
 
 clean: cleantests
 	rm -f *~ $(OBJS) $(TLS_OBJ) $(CHECK_PROGS) $(CHECK_OBJS)
@@ -146,9 +150,6 @@ test: check
 # There seems to be no standard way to specify some variables as
 # exported from a Makefile apart from listing them like this.
 
-# TODO: Tests that depend on built test aide programs like tls need to
-# know where the build directory is.
-
 # This depends on building rsync; if we need any helper programs it
 # should depend on them too.
 

NEWS

@@ -1,229 +1,384 @@
-NEWS for rsync 2.6.2 (30 Apr 2004)
-Protocol: 28 (unchanged)
-Changes since 2.6.1:
+NEWS for rsync 2.6.4 (30 March 2005)
+Protocol: 29 (changed)
+Changes since 2.6.3:
 
+  OUTPUT CHANGES:
+
+    - When rsync deletes a directory and outputs a verbose message about
+      it, it now appends a trailing slash to the name instead of (only
+      sometimes) outputting a preceding "directory " string.
+
+    - The --stats output will contain file-list time-statistics if both
+      sides are 2.6.4, or if the local side is 2.6.4 and the files are
+      being pushed (since the stats come from the sending side).
+      (Requires protocol 29 for a pull.)
+
+    - The "%o" (operation) log-format escape now has a third value (besides
+      "send" and "recv"):  "del." (with trailing dot to make it 4 chars).
+      This changes the way deletions are logged in the daemon's log file.
+
+    - When the --log-format option is combined with --verbose, rsync now
+      avoids outputting the name of the file twice in most circumstances.
+      As long as the --log-format item does not refer to any post-transfer
+      items (such as %b or %c), the --log-format message is output prior to
+      the transfer, so --verbose is now the equivalent of a --log-format of
+      '%n%L' (which outputs the name and any link info).  If the log output
+      must occur after the transfer to be complete, the only time the name
+      is also output prior to the transfer is when --progress was specified
+      (so that the name will precede the progress stats, and the full
+      --log-format output will come after).
+  
   BUG FIXES:
 
-    - Fixed a major bug in the sorting of the filenames when --relative
-      is used for some sources (just sources such as "/" and "/*" were
-      affected).  This fix ensures that we ask for the right file-list
-      item when requesting changes from the sender.
+    - Restore the list-clearing behavior of "!" in a .cvsignore file (2.6.3
+      was only treating it as a special token in an rsync include/exclude
+      file).
 
-    - Rsync now checks the return value of the close() function to
-      better report disk-full problems on an NFS file system.
+    - The combination of --verbose and --dry-run now mentions the full list
+      of changes that would be output without --dry-run.
 
-    - Restored the old daemon-server behavior of logging error messages
-      rather than returning them to the user.  (A better long-term fix
-      will be sought in the future.)
+    - Avoid a mkdir warning when removing a directory in the destination
+      that already exists in the --backup-dir.
 
-    - An obscure uninitialized-variable bug was fixed in the uid/gid
-      code.  (This bug probably had no ill effects.)
+    - An OS that has a binary mode for its files (such as cygwin) needed
+      setmode(fd, O_BINARY) called on the temp-file we opened with
+      mkstemp().  (Fix derived from the cygwin's 2.6.3 rsync package.)
 
-    - Got rid of the configure check for sys/sysctl.h (it wasn't used
-      and was causing a problem on some systems).  Also improved the
-      broken-largefile-locking test to try to avoid failure due to an
-      NFS build-dir.
+    - Fixed a potential hang when verbosity is high, the client side is
+      the sender, and the file-list is large.
 
-    - Fixed a compile problem on systems that don't define
-      AI_NUMERICHOST.
+    - Fixed a potential protocol-corrupting bug where the generator could
+      merge a message from the receiver into the middle of a multiplexed
+      packet of data if only part of that data had been written out to the
+      socket when the message from the generator arrived.
 
-    - Fixed a compile problem in the popt source for compilers that
-      don't support __attribute__.
+    - We now check if the OS doesn't support using mknod() for creating
+      FIFOs and sockets, and compile-in some compatibility code using
+      mkfifo() and socket() when necessary.
 
-  INTERNAL:
+    - Fixed an off-by-one error in the handling of --max-delete=N.  Also,
+      if the --max-delete limit is exceeded during a run, we now output a
+      warning about this at the end of the run and exit with a new error
+      code (25).
 
-    - Improved the testsuite's "merge" test to work on OSF1.
+    - One place in the code wasn't checking if fork() failed.
 
-    - Two new diffs were added to the patches dir.
+    - The "ignore nonreadable" daemon parameter used to erroneously affect
+      readable symlinks that pointed to a non-existent file.
 
-
-NEWS for rsync 2.6.1 (26 Apr 2004)
-Protocol: 28 (changed)
-Changes since 2.6.0:
+    - If the OS does not have lchown() and a chown() of a symlink will
+      affect the referent of a symlink (as it should), we no longer try
+      to set the user and group of a symlink.
 
-  SECURITY FIXES:
+    - The generator now properly runs the hard-link loop and the dir-time
+      rewriting loop after we're sure that the redo phase is complete.
 
-    - Paths sent to an rsync daemon are more thoroughly sanitized when
-      chroot is not used.  If you're running a non-read-only rsync
-      daemon with chroot disabled, *please upgrade*, ESPECIALLY if the
-      user privs you run rsync under is anything above "nobody".
+    - When --backup was specified with --partial-dir=DIR, where DIR is a
+      relative path, the backup code was erroneously trying to backup a
+      file that was put into the partial-dir.
+
+    - If a file gets resent in a single transfer and the --backup option is
+      enabled along with --inplace, rsync no longer performs a duplicate
+      backup (it used to overwrite the first backup with the failed file).
+
+    - One call to flush_write_file() was not being checked for an error.
+
+    - The --no-relative option was not being sent from the client to a
+      server sender.
+
+    - If an rsync daemon specified "dont compress = ..." for a file and the
+      client tried to specify --compress, the libz code was not handling a
+      compression level of 0 properly.  This could cause a transfer failure
+      if the block-size for a file was large enough (e.g. rsync might have
+      exited with an error for large files).
+
+    - Fixed a bug that would sometimes surface when using --compress and
+      sending a file with a block-size larger than 64K (either manually
+      specified, or computed due to the file being really large).  Prior
+      versions of rsync would sometimes fail to decompress the data
+      properly, and thus the transferred file would fail its verification.
+
+    - If a daemon can't open the specified log file (i.e. syslog is not
+      being used), die without crashing.  We also output an error about
+      the failure on stderr (which will only be seen if --no-detach was
+      specified) and exit with a new error code (6).
+
+    - A local transfer no longer duplicates all its include/exclude options
+      (since the forked process already has a copy of the exclude list,
+      there's no need to send them a set of duplicates).
+
+    - When --progress is specified, the output of items that the generator
+      is creating (e.g. dirs, symlinks) is now integrated into the progress
+      output without overlapping it.  (Requires protocol 29.)
+
+    - When --timeout is specified, lulls that occur in the transfer while
+      the generator is doing work that does not generate socket traffic
+      (looking for changed files, deleting files, doing directory-time
+      touch-ups, etc.) will cause a new keep-alive packet to be sent that
+      should keep the transfer going as long as the generator continues to
+      make progress.  (Requires protocol 29.)
+
+    - The stat size of a device is not added to the total file size of the
+      items in the transfer (the size might be undefined on some OSes).
+
+    - Fixed a problem with refused-option messages sometimes not making it
+      back to the client side when a remote --files-from was in effect and
+      the daemon was the receiver.
+
+    - The --compare-dest option was not updating a file that differred in
+      (the preserved) attributes from the version in the compare-dest DIR.
+
+    - When rsync is copying files into a write-protected directory, fixed
+      the change-report output for the directory so that we don't report
+      an identical directory as changed.
 
   ENHANCEMENTS:
 
-    - Lower memory use, more optimal transfer of data over the socket,
-      and lower CPU usage (see the INTERNAL section for details).
+    - Rsync now supports popt's option aliases, which means that you can
+      use /etc/popt and/or ~/.popt to create your own option aliases.
 
-    - The RSYNC_PROXY environment variable can now contain a
-      "USER:PASS@" prefix before the "HOST:PORT" information.
-      (Bardur Arantsson)
+    - Added the --delete-during (--del) option which will delete files
+      from the receiving side incrementally as each directory in the
+      transfer is being processed.  This makes it more efficient than the
+      default, before-the-transfer behavior, which is now also available as
+      --delete-before (and is still the default --delete-WHEN option that
+      will be chosen if --delete or --delete-excluded is specified without
+      a --delete-WHEN choice).  All the --del* options infer --delete, so
+      an rsync daemon that refuses "delete" will still refuse to allow any
+      file-deleting options (including the new --remove-sent-files option).
 
-    - The --progress output now mentions how far along in the transfer
-      we are, including both a count of files transferred and a
-      percentage of the total file-count that we've processed.  It also
-      shows better current-rate-of-transfer and remaining-transfer-time
-      values.
+    - All the --delete-WHEN options are now more memory efficient:
+      Previously an duplicate set of file-list objects was created on the
+      receiving side for the entire destination hierarchy.  The new
+      algorithm only creates one directory of objects at a time (for files
+      inside the transfer).
 
-    - The configure script now accepts --with-rsyncd-conf=PATH to
-      override the default value of the /etc/rsyncd.conf file.
+    - Added the --copy-dest option, which works like --link-dest except
+      that it locally copies identical files instead of hard-linking them.
 
-    - Added a couple extra diffs in the "patches" dir, removed the ones
-      that got applied, and rebuilt the rest.
+    - Added support for specifying multiple --compare-dest, --copy-dest, or
+      --link-dest options, but only of a single type. (Promoted from the
+      patches dir and enhanced.) (Requires protocol 29.)
 
-    - Documentation changes now attempt to describe some often mis-
-      understood features more clearly.
+    - Added the --max-size option. (Promoted from the patches dir.)
 
-  BUG FIXES:
+    - The daemon-mode options are now separated from the normal rsync
+      options so that they can't be mixed together.  This makes it
+      impossible to start a daemon that has improper default option values
+      (which could cause problems when a client connects, such as hanging
+      or crashing).
 
-    - When -x (--one-file-system) is combined with -L (--copy-links) or
-      --copy-unsafe-links, no symlinked files are skipped, even if the
-      referent file is on a different filesystem.
+    - The --bwlimit option may now be used in combination with --daemon
+      to specify both a default value for the daemon side and a value
+      that cannot be exceeded by a user-specified --bwlimit option.
 
-    - The --link-dest code now works properly for a non-root user when
-      (1) the UIDs of the source and destination differ and -o was
-      specified, or (2) when the group of the source can't be used on
-      the destination and -g was specified.
+    - Added the "port" parameter to the rsyncd.conf file. (Promoted from
+      the patches dir.)  Also added "address".  The command-line options
+      take precedence over a config-file option, as expected.
 
-    - Fixed a bug in the handling of -H (hard-links) that might cause
-      the expanded PATH/NAME value of the current item to get
-      overwritten (due to an expanded-name caching bug).
-      
-    - We now reset the "new data has been sent" flag at the start of
-      each file we send.  This makes sure that an interrupted transfer
-      with the --partial option set doesn't keep a shorter temp file
-      than the current basis file when no new data has been transfered
-      over the wire for that file.
+    - In _exit_cleanup(): when we are exiting with a partially-received
+      file, we now flush any data in the write-cache before closing the
+      partial file.
 
-    - Fixed a byte-order problem in --batch-mode on big-endian machines.
-      (Jay Fenlason)
+    - The --inplace support was enhanced to work with --compare-dest,
+      --link-dest, and (the new) --copy-dest options. (Requires protocol
+      29.)
 
-    - Fixed configure bug when running "./configure --disable-ipv6".
+    - Added the --dirs (-d) option for an easier way to copy directories
+      without recursion.
 
-    - Fixed "make test" bug when build dir is not the source dir.
+    - Added the --list-only option, which is mainly a way for the client to
+      put the server into listing mode without needing to resort to any
+      internal option kluges (e.g. the age-old use of "-r --exclude="/*/*"
+      for a non-recursive listing).  This option is used automatically
+      (behind the scenes) when a modern rsync speaks to a modern daemon,
+      but may also be specified manually if you want to force the use of
+      the --list-only option over a remote-shell connection.
 
-    - When using --cvs-exclude, the exclude items we get from a
-      per-directory's .cvsignore file once again only affect that one
-      directory (not all following directories too).  The items are also
-      now properly word-split and parsed without any +/- prefix parsing.
+    - Added the --omit-dir-times (-O) option, which will avoid updating
+      the modified time for directories when --times was specified.  This
+      option will avoid an extra pass through the file-list at the end of
+      the transfer (to tweak all the directory times), which may provide
+      an appreciable speedup for a really large transfer. (Promoted from
+      the patches dir.)
 
-    - When specifying the USER@HOST: prefix for a file, the USER part
-      can now contain an '@', if needed (i.e. the last '@' is used to
-      find the HOST, not the first).
+    - Added the --filter (-f) option and its helper option, -F.  Filter
+      rules are an extension to the existing include/exclude handling
+      that also supports nested filter files as well as per-directory
+      filter files (like .cvsignore, but with full filter-rule parsing).
+      This new option was chosen in order to ensure that all existing
+      include/exclude processing remained 100% compatible with older
+      versions.  Protocol 29 is needed for full filter-rule support, but
+      backward-compatible rules work with earlier protocol versions.
+      (Promoted from the patches dir and enhanced.)
 
-    - Fixed some bugs in the handling of group IDs for non-root users:
-      (1) It properly handles a group that the sender didn't have a name
-      for (it would previously skip changing the group on any files in
-      that group).  (2) If --numeric-ids is used, rsync no longer
-      attempts to set groups that the user doesn't have the permission
-      to set.
+    - Added the --delay-updates option that puts all updated files into
+      a temporary directory (by default ".~tmp~", but settable via the
+      --partial-dir=DIR option) until the end of the transfer.  This
+      makes the updates a little more atomic for a large transfer.
 
-    - Fixed the "refuse options" setting in the rsyncd.conf file.
+    - If rsync is put into the background, any output from --progress is
+      reduced.
 
-    - Improved the -x (--one-file-system) flag's handling of any mount-
-      point directories we encounter.  It is both more optimal (in that
-      it no longer does a useless scan of the contents of the mount-
-      point dirs) and also fixes a bug where a remapped mount of the
-      original filesystem could get discovered in a subdir we should be
-      ignoring.
+    - Documented the "max verbosity" setting for rsyncd.conf.  (This
+      setting was added a couple releases ago, but left undocumented.)
 
-    - Rsync no longer discards a double-slash at the start of a filename
-      when trying to open the file.  It also no longer constructs names
-      that start with a double slash (unless the user supplied them).
+    - The sender and the generator now double-check the file-list index
+      they are given, and refuse to try to do a file transfer on a
+      non-file index (since that would indicate that something had gone
+      very wrong).
 
-    - Path-specifying options to a daemon should now work the same with
-      or without chroot turned on.  Previously, such a option (such as
-      --link-dest) would get its absolute path munged into a relative
-      one if chroot was not on, making that setting fairly useless.
-      Rsync now transforms the path into one that is based on the
-      module's base dir when chroot is not enabled.
+    - Added the --itemize-changes (-i) option, which is a way to output a
+      more detailed list of what files changed and in what way.  The effect
+      is the same as specifying a --log-format of "%i %n%L" (see both the
+      rsync and rsyncd.conf manpages).  Works with --dry-run too.
 
-    - Fixed compilation problem on Tru64 Unix (having to do with
-      sockaddr.sa_len and sockaddr.sin_len).
+    - Added the --fuzzy (-y) option, which attempts to find a basis file
+      for a file that is being created from scratch.  The current algorithm
+      only looks in the destination directory for the created file, but it
+      does attempt to find a match based on size/mod-time (in case the file
+      was renamed with no other changes) as well as based on a fuzzy
+      name-matching algorithm.  This option requires protocol 29 because it
+      needs the new file-sorting order.  (Promoted from patches dir and
+      enhanced.) (Requires protocol 29.)
 
-    - Fixed a compatibility problem interacting with older rsync
-      versions that might send us an empty --suffix value without
-      telling us that --backup-dir was specified.
+    - Added the --remove-sent-files option, which lets you move files
+      between systems.
 
-    - The "hosts allow" option for a daemon-over-remote-shell process
-      now has improved support for IPv6 addresses and a fix for systems
-      that have a length field in their socket structs.
+    - The hostname in HOST:PATH or HOST::PATH may now be an IPv6 literal
+      enclosed in '[' and ']' (e.g. "[::1]").  (We already allowed IPv6
+      literals in the rsync://HOST:PORT/PATH format.)
 
-    - Fixed the ability to request an empty backup --suffix when sending
-      files to an rsync daemon.
+    - When rsync recurses to build the file list, it no longer keeps open
+      one or more directory handles from the dir's parent dirs.
+
+    - When building under windows, the default for --daemon is now to
+      avoid detaching, requiring the new --detach option to force rsync
+      to detach.
+
+    - The --dry-run option can now be combined with either --write-batch or
+      --read-batch, allowing you to run a do-nothing test command to see
+      what would happen without --dry-run.
+
+    - The daemon's "read only" config item now sets an internal read_only
+      variable that makes extra sure that no write/delete calls on the
+      read-only side can succeed.
+
+    - The log-format % escapes can now have a numeric field width in
+      between the % and the escape letter (e.g. "%-40n %08p").
+
+    - Improved the option descriptions in the --help text.
+
+  SUPPORT FILES:
+
+    - Added atomic-rsync to the support dir: a perl script that will
+      transfer some files using rsync, and then move the updated files into
+      place all at once at the end of the transfer.  Only works when
+      pulling, and uses --link-dest and a parallel hierarchy of files to
+      effect its update.
+
+    - Added mnt-excl to the support dir: a perl script that takes the
+      /proc/mounts file and translates it into a set of excludes that will
+      exclude all mount points (even mapped mounts to the same disk).  The
+      excludes are made relative to the specified source dir and properly
+      anchored.
+
+    - Added savetransfer.c to the support dir: a C program that can make
+      a copy of all the data that flows over the wire.  This lets you test
+      for data corruption (by saving the data on both the sending side and
+      the receiving side) and provides one way to debug a protocol error.
+
+    - Added rrsync to the support dir: this is an updated version of Joe
+      Smith's restricted rsync perl script.  This helps to ensure that only
+      certain rsync commands can be run by an ssh invocation.
 
   INTERNAL:
 
-    - Most of the I/O is now buffered, which results in a pretty large
-      speedup when running under MS Windows.  (Craig Barratt)
+    - Added better checking of the checksum-header values that come over
+      the socket.
 
-    - Optimizations to the name-handling/comparing code have made some
-      significant reductions in user-CPU time for large file sets.
+    - Merged a variety of file-deleting functions into a single function so
+      that it is easier to maintain.
 
-    - Some cleanup of the variable types make the code more consistent.
+    - Improved the type of some variables (particularly blocksize vars) for
+      consistency and proper size.
 
-    - Reduced memory requirements of hard link preservation.
-      (J.W. Schultz)
+    - Got rid of the uint64 type (which we didn't need).
 
-    - Implemented a new algorithm for hard-link handling that speeds up
-      the code significantly.  (J.W. Schultz and Wayne Davison)
+    - Use a slightly more compatible set of core #include directives.
 
-    - The --hard-link option now uses the first existing file in the
-      group of linked files as the basis for the transfer.  This
-      prevents the sub-optimal transfer of a file's data when a new
-      hardlink is added on the sending side and it sorts alphabetically
-      earlier in the list than the files that are already present on the
-      receiving side.
+    - Defined int32 in a way that ensures that the build dies if we can't
+      find a variable with at least 32 bits.
 
-    - Dropped support for protocol versions less than 20 (2.3.0 released
-      15 Mar 1999) and activated warnings for protocols less than 25
-      (2.5.0 released 23 Aug 2001). (Wayne Davison and J.W. Schultz,
-      severally)
+  PROTOCOL DIFFERENCES FOR VERSION 29:
 
-    - More optimal data transmission for --hard-links (protocol 28).
+    - A 16-bit flag-word is transmitted after every file-list index.  This
+      indicates what is changing between the sender and the receiver.  The
+      generator now transmits an index and a flag-word to indicate when
+      dirs and symlinks have changed (instead of producing a message),
+      which makes the outputting of the information more consistent and
+      less prone to screen corruption (because the local receiver/sender is
+      now outputting all the file-change info messages).
 
-    - More optimal data transmission for --checksum (protocol 28).
+    - If a file is being hard-linked, the ITEM_XNAME_FOLLOWS bit is enabled
+      in the flag-word and the name of the file that was linked immediately
+      follows in vstring format (see below).
 
-    - Less memory is used when --checksum is specified.
+    - If a file is being transferred with an alternate-basis file, the
+      ITEM_BASIS_TYPE_FOLLOWS bit is enabled in the flag-word and a single
+      byte follows, indicating what type of basis file was chosen.  If that
+      indicates that a fuzzy-match was selected, the ITEM_XNAME_FOLLOWS bit
+      is set in the flag-word and the name of the match in vstring format
+      follows the basis byte.  A vstring is a variable length string that
+      has its size written prior to the string, and no terminating null.
+      If the string is from 1-127 bytes, the length is a single byte.  If
+      it is from 128-32767 bytes, the length is written as ((len >> 8) |
+      0x80) followed by (len % 0x100).
 
-    - Less memory is used in the file list (a per-file savings).
+    - The sending of exclude names is done using filter-rule syntax.  This
+      means that all names have a prefixed rule indicator, even excludes
+      (which used to be sent as a bare pattern, when possible).  The -C
+      option will include the per-dir .cvsignore merge file in the list of
+      filter rules so it is positioned correctly (unlike in some older
+      transfer scenarios).
 
-    - The generator is now better about not modifying the file list
-      during the transfer in order to avoid a copy-on-write memory
-      bifurcation (on systems where fork() uses shared memory).
-      Previously, rsync's shared memory would slowly become unshared,
-      resulting in real memory usage nearly doubling on the receiving
-      side by the end of the transfer.  Now, as long as permissions
-      are being preserved, the shared memory should remain that way
-      for the entire transfer.
+    - Rsync sorts the filename list in a different way: it sorts the subdir
+      names after the non-subdir names for each dir's contents, and it
+      always puts a dir's contents immediately after the dir's name in the
+      list.  (Previously an item named "foo.txt" would sort in between
+      directory "foo/" and "foo/bar".)
 
-    - Changed hardlink info and file_struct + strings to use allocation
-      pools.  This reduces memory use for large file-sets and permits
-      freeing memory to the OS.  (J.W. Schultz) 
+    - When talking to a protocol 29 rsync daemon, a list-only request
+      is able to note this before the options are sent over the wire and
+      the new --list-only option is included in the options.
 
-    - The 2 pipes used between the receiver and generator processes
-      (which are forked on the same machine) were reduced to 1 pipe and
-      the protocol improved so that (1) it is now impossible to have the
-      "redo" pipe fill up and hang rsync, and (2) trailing messages from
-      the receiver don't get lost on their way through the generator
-      over to the sender (which mainly affected hard-link messages and
-      verbose --stats output).
+    - When the --stats bytes are sent over the wire (or stored in a batch),
+      they now include two elapsed-time values: one for how long it took to
+      build the file-list, and one for how long it took to send it over the
+      wire (each expressed in thousandths of a second).
 
-    - Improved the internal uid/gid code to be more portable and a
-      little more optimized.
+    - When --delete-excluded is specified with some filter rules (AKA
+      excludes), a client sender will now initiate a send of the rules to
+      the receiver (older protocols used to omit the sending of excludes in
+      this situation since there were no receiver-specific rules that
+      survived --delete-excluded back then).  Note that, as with all the
+      filter-list sending, only items that are significant to the other
+      side will actually be sent over the wire, so the filter-rule list
+      that is sent in this scenario is often empty.
 
-    - The device numbers sent when using --devices are now sent as
-      separate major/minor values with 32-bit accuracy (protocol 28).
-      Previously, the copied devices were sent as a single 32-bit
-      number.  This will make inter-operation of 64-bit binaries more
-      compatible with their 32-bit brethren (with both ends of the
-      connection are using protocol 28).  Note that optimizations in the
-      binary protocol for sending the device numbers often results in
-      fewer bytes being used than before, even though more precision is
-      now available.
+    - An index equal to the file-list count is sent as a keep-alive packet
+      from the generator to the sender, which then forwards it on to the
+      receiver.  This normally invalid index is only a valid keep-alive
+      packet if the 16-bit flag-word that follows it contains a single bit
+      (ITEM_IS_NEW, which is normally an illegal flag to appear alone).
 
-    - Some cleanup of the exclude/include structures and its code made
-      things clearer (internally), simpler, and more efficient.
+    - A protocol-29 batch file includes a bit for the setting of the --dirs
+      option and for the setting of the --compress option.  Also, the shell
+      script created by --write-batch will use the --filter option instead
+      of --exclude-from to capture any filter rules.
 
-    - The reading & writing of the file-list in batch-mode is now
-      handled by the same code that sends & receives the list over the
-      wire.  This makes it much easier to maintain.  (Note that the
-      batch code is still considered to be experimental.)
+  BUILD CHANGES:
+
+    - Handle an operating system that use mkdev() in place of makedev().
+
+    - Improved configure to better handle cross-compiling.

OLDNEWS

@@ -1,3 +1,493 @@
+NEWS for rsync 2.6.3 (30 Sep 2004)
+Protocol: 28 (unchanged)
+Changes since 2.6.2:
+
+  SECURITY FIXES:
+
+    - A bug in the sanitize_path routine (which affects a non-chrooted
+      rsync daemon) could allow a user to craft a pathname that would get
+      transformed into an absolute path for certain options (but not for
+      file-transfer names).  If you're running an rsync daemon with chroot
+      disabled, *please upgrade*, ESPECIALLY if the user privs you run
+      rsync under is anything above "nobody".
+
+  OUTPUT CHANGES (ATTN: those using a script to parse the verbose output):
+
+    - Please note that the 2-line footer (output when verbose) now uses the
+      term "sent" instead of "wrote" and "received" instead of "read".  If
+      you are not parsing the numeric values out of this footer, a script
+      would be better off using the empty line prior to the footer as the
+      indicator that the verbose output is over.
+      
+    - The output from the --stats option was similarly affected to change
+      "written" to "sent" and "read" to "received".
+
+    - Rsync ensures that a filename that contains a newline gets mentioned
+      with each newline transformed into a question mark (which prevents a
+      filename from causing an empty line to be output).
+
+    - The "backed up ..." message that is output when at least 2 --verbose
+      options are specified is now the same both with and without the
+      --backup-dir option.
+
+  BUG FIXES:
+
+    - Fixed a crash bug that might appear when --delete was used and
+      multiple source directories were specified.
+
+    - Fixed a 32-bit truncation of the file length when generating the
+      checksums.
+
+    - The --backup code no longer attempts to create some directories
+      over and over again (generating warnings along the way).
+
+    - Fixed a bug in the reading of the secrets file (by the daemon) and
+      the password file (by the client):  the files no longer need to be
+      terminated by a newline for their content to be read in.
+
+    - If a file has a read error on the sending side or the reconstructed
+      data doesn't match the expected checksum (perhaps due to the basis
+      file changing during the transfer), the receiver will no longer
+      retain the resulting file unless the --partial option was specified.
+      (Note: for the read-error detection to work, neither side can be
+      older than 2.6.3 -- older receivers will always retain the file, and
+      older senders don't tell the receiver that the file had a read
+      error.)
+
+    - If a file gets resent in a single transfer and the --backup option
+      is enabled, rsync no longer performs a duplicate backup (it used to
+      overwrite the original file in the backup area).
+
+    - Files specified in the daemon's "exclude" or "exclude from" config
+      items are now excluded from being uploaded (assuming that the module
+      allows uploading at all) in addition to the old download exclusion.
+
+    - Got rid of a potential hang in the receiver when near the end of a
+      phase.
+
+    - When using --backup without a --backup-dir, rsync no longer preserves
+      the modify time on directories.  This avoids confusing NFS.
+
+    - When --copy-links (-L) is specified, we now output a separate error
+      for a symlink that has no referent instead of claiming that a file
+      "vanished".
+
+    - The --copy-links (-L) option no longer has the side-effect of telling
+      the receiving side to follow symlinks.  See the --keep-dirlinks
+      option (mentioned below) for a way to specify that behavior.
+
+    - Error messages from the daemon server's option-parsing (such as
+      refused options) are now successfully transferred back to the client
+      (the server used to fail to send the message because the socket
+      wasn't in the right state for the message to get through).
+
+    - Most transfer errors that occur during a daemon transfer are now
+      returned to the user in addition to being logged (some messages are
+      intended to be daemon-only and are not affected by this).
+
+    - Fixed a bug in the daemon authentication code when using one of the
+      batch-processing options.
+
+    - We try to work around some buggy IPv6 implementations that fail to
+      implement IPV6_V6ONLY.  This should fix the "address in use" error
+      that some daemons get when running on an OS with a buggy IPv6
+      implementation.  Also, if the new code gets this error, we might
+      suggest that the user specify --ipv4 or --ipv6 (if we think it will
+      help).
+
+    - When the remote rsync dies, make a better effort to recover any error
+      messages it may have sent before dying (the local rsync used to just
+      die with a socket-write error).
+
+    - When using --delete and a --backup-dir that contains files that are
+      hard-linked to their destination equivalents, rsync now makes sure
+      that removed files really get removed (avoids a really weird rename()
+      behavior).
+
+    - Avoid a bogus run-time complaint about a lack of 64-bit integers when
+      the int64 type is defined as an off_t and it actually has 64-bits.
+
+    - Added a configure check for open64() without mkstemp64() so that we
+      can avoid using mkstemp() when such a combination is encountered.
+      This bypasses a problem writing out large temp files on OSes such as
+      AIX and HP-UX.
+
+    - Fixed an age-old crash problem with --read-batch on a local copy
+      (rsync was improperly assuming --whole-file for the local copy).
+
+    - When --dry-run (-n) is used and the destination directory does not
+      exist, rsync now produces a correct report of files that would be
+      sent instead of dying with a chdir() error.
+
+    - Fixed a bug that could cause a slow-to-connect rsync daemon to die
+      with an error instead of waiting for the connection to finish.
+
+    - Fixed an ssh interaction that could cause output to be lost when the
+      user chose to combine the output of rsync's stdout and stderr (e.g.
+      using the "2>&1").
+
+  ENHANCEMENTS:
+
+    - Added the --partial-dir=DIR option that lets you specify where to
+      (temporarily) put a partially transferred file (instead of over-
+      writing the destination file).  E.g.  --partial-dir=.rsync-partial
+      Also added support for the RSYNC_PARTIAL_DIR environment variable
+      that, when found, transforms a regular --partial option (such as
+      the convenient -P option) into one that also specifies a directory.
+
+    - Added --keep-dirlinks (-K), which allows you to symlink a directory
+      onto another partition on the receiving side and have rsync treat it
+      as matching a normal directory from the sender.
+
+    - Added the --inplace option that tells rsync to write each destination
+      file without using a temporary file.  The matching of existing data
+      in the destination file can be severely limited by this, but there
+      are also cases where this is more efficient (such as appending data).
+      Use only when needed (see the man page for more details).
+
+    - Added the "write only" option for the daemon's config file.
+
+    - Added long-option names for -4 and -6 (namely --ipv4 and --ipv6)
+      and documented all these options in the man page.
+
+    - Improved the handling of the --bwlimit option so that it's less
+      bursty, more accurate, and works properly over a larger range of
+      values.
+
+    - The rsync daemon-over-ssh code now looks for SSH_CONNECTION and
+      SSH2_CLIENT in addition to SSH_CLIENT to figure out the IP address.
+
+    - Added the --checksum-seed=N option for advanced users.
+
+    - Batch writing/reading has a brand-new implementation that is simpler,
+      fixes a few weird problems with the old code (such as no longer
+      sprinkling the batch files into different dirs or even onto different
+      systems), and is much less intrusive into the code (making it easier
+      to maintain for the future).  The new code generates just one data
+      file instead of three, which makes it possible to read the batch on
+      stdin via a remote shell.  Also, the old requirement of forcing the
+      same fixed checksum-seed for all batch processing has been removed.
+
+    - If an rsync daemon has a module set with "list = no" (which hides its
+      presence in the list of available modules), a user that fails to
+      authenticate gets the same "unknown module" error that they would get
+      if the module were actually unknown (while still logging the real
+      error to the daemon's log file).  This prevents fishing for module
+      names.
+
+    - The daemon's "refuse options" config item now allows you to match
+      option names using wildcards and/or the single-letter option names.
+
+    - Each transferred file now gets its permissions and modified-time
+      updated before the temp-file gets moved into place.  Previously, the
+      finished file would have a very brief window where its permissions
+      disallowed all group and world access.
+
+    - Added the ability to parse a literal IPv6 address in an "rsync:" URL
+      (e.g. rsync://[2001:638:500:101::21]:873/module/dir).
+
+    - The daemon's wildcard expanding code can now handle more than 1000
+      filenames (it's now limited by memory instead of having a hard-wired
+      limit).
+
+  INTERNAL:
+
+    - Some cleanup in the exclude code has saved some per-exclude memory
+      and made the code easier to maintain.
+
+    - Improved the argv-overflow checking for a remote command that has a
+      lot of args.
+
+    - Use rsyserr() in the various places that were still calling rprintf()
+      with strerror() as an arg.
+
+    - If an rsync daemon is listening on multiple sockets (to handle both
+      IPv4 and IPv6 to a single port), we now close all the unneeded file
+      handles after we accept a connection (we used to close just one of
+      them).
+
+    - Optimized the handling of larger block sizes (rsync used to slow to a
+      crawl if the block size got too large).
+
+    - Optimized away a loop in hash_search().
+
+    - Some improvements to the sanitize_path() and clean_fname() functions
+      makes them more efficient and produce better results (while still
+      being compatible with the file-name cleaning that gets done on both
+      sides when sending the file-list).
+
+    - Got rid of alloc_sanitize_path() after adding a destination-buffer
+      arg to sanitize_path() made it possible to put all the former's
+      functionality into the latter.
+
+    - The file-list that is output when at least 4 verbose options are
+      specified reports the uid value on the sender even when rsync is
+      not running as root (since we might be sending to a root receiver).
+
+  BUILD CHANGES:
+
+    - Added a "gen" target to rebuild most of the generated files,
+      including configure, config.h.in, the man pages, and proto.h.
+
+    - If "make proto" doesn't find some changes in the prototypes, the
+      proto.h file is left untouched (its time-stamp used to always be
+      updated).
+
+    - The variable $STRIP (that is optionally set by the install-strip
+      target's rule) was changed to $INSTALL_STRIP because some systems
+      have $STRIP already set in the environment.
+
+    - Fixed a build problem when SUPPORT_HARD_LINKS isn't defined.
+
+    - When cross-compiling, the gettimeofday() function is now assumed to
+      be a modern version that takes two-args (since we can't test it).
+
+  DEVELOPER RELATED:
+
+    - The scripts in the testsuite dir were cleaned up a bit and a few
+      new tests added.
+
+    - Some new diffs were added to the patches dir, and some accepted
+      ones were removed.
+
+
+NEWS for rsync 2.6.2 (30 Apr 2004)
+Protocol: 28 (unchanged)
+Changes since 2.6.1:
+
+  BUG FIXES:
+
+    - Fixed a major bug in the sorting of the filenames when --relative
+      is used for some sources (just sources such as "/" and "/*" were
+      affected).  This fix ensures that we ask for the right file-list
+      item when requesting changes from the sender.
+
+    - Rsync now checks the return value of the close() function to
+      better report disk-full problems on an NFS file system.
+
+    - Restored the old daemon-server behavior of logging error messages
+      rather than returning them to the user.  (A better long-term fix
+      will be sought in the future.)
+
+    - An obscure uninitialized-variable bug was fixed in the uid/gid
+      code.  (This bug probably had no ill effects.)
+
+  BUILD CHANGES:
+
+    - Got rid of the configure check for sys/sysctl.h (it wasn't used
+      and was causing a problem on some systems).  Also improved the
+      broken-largefile-locking test to try to avoid failure due to an
+      NFS build-dir.
+
+    - Fixed a compile problem on systems that don't define
+      AI_NUMERICHOST.
+
+    - Fixed a compile problem in the popt source for compilers that
+      don't support __attribute__.
+
+  DEVELOPER RELATED:
+
+    - Improved the testsuite's "merge" test to work on OSF1.
+
+    - Two new diffs were added to the patches dir.
+
+
+NEWS for rsync 2.6.1 (26 Apr 2004)
+Protocol: 28 (changed)
+Changes since 2.6.0:
+
+  SECURITY FIXES:
+
+    - Paths sent to an rsync daemon are more thoroughly sanitized when
+      chroot is not used.  If you're running a non-read-only rsync
+      daemon with chroot disabled, *please upgrade*, ESPECIALLY if the
+      user privs you run rsync under is anything above "nobody".
+
+  ENHANCEMENTS:
+
+    - Lower memory use, more optimal transfer of data over the socket,
+      and lower CPU usage (see the INTERNAL section for details).
+
+    - The RSYNC_PROXY environment variable can now contain a
+      "USER:PASS@" prefix before the "HOST:PORT" information.
+      (Bardur Arantsson)
+
+    - The --progress output now mentions how far along in the transfer
+      we are, including both a count of files transferred and a
+      percentage of the total file-count that we've processed.  It also
+      shows better current-rate-of-transfer and remaining-transfer-time
+      values.
+
+    - Documentation changes now attempt to describe some often mis-
+      understood features more clearly.
+
+  BUG FIXES:
+
+    - When -x (--one-file-system) is combined with -L (--copy-links) or
+      --copy-unsafe-links, no symlinked files are skipped, even if the
+      referent file is on a different filesystem.
+
+    - The --link-dest code now works properly for a non-root user when
+      (1) the UIDs of the source and destination differ and -o was
+      specified, or (2) when the group of the source can't be used on
+      the destination and -g was specified.
+
+    - Fixed a bug in the handling of -H (hard-links) that might cause
+      the expanded PATH/NAME value of the current item to get
+      overwritten (due to an expanded-name caching bug).
+      
+    - We now reset the "new data has been sent" flag at the start of
+      each file we send.  This makes sure that an interrupted transfer
+      with the --partial option set doesn't keep a shorter temp file
+      than the current basis file when no new data has been transfered
+      over the wire for that file.
+
+    - Fixed a byte-order problem in --batch-mode on big-endian machines.
+      (Jay Fenlason)
+
+    - When using --cvs-exclude, the exclude items we get from a
+      per-directory's .cvsignore file once again only affect that one
+      directory (not all following directories too).  The items are also
+      now properly word-split and parsed without any +/- prefix parsing.
+
+    - When specifying the USER@HOST: prefix for a file, the USER part
+      can now contain an '@', if needed (i.e. the last '@' is used to
+      find the HOST, not the first).
+
+    - Fixed some bugs in the handling of group IDs for non-root users:
+      (1) It properly handles a group that the sender didn't have a name
+      for (it would previously skip changing the group on any files in
+      that group).  (2) If --numeric-ids is used, rsync no longer
+      attempts to set groups that the user doesn't have the permission
+      to set.
+
+    - Fixed the "refuse options" setting in the rsyncd.conf file.
+
+    - Improved the -x (--one-file-system) flag's handling of any mount-
+      point directories we encounter.  It is both more optimal (in that
+      it no longer does a useless scan of the contents of the mount-
+      point dirs) and also fixes a bug where a remapped mount of the
+      original filesystem could get discovered in a subdir we should be
+      ignoring.
+
+    - Rsync no longer discards a double-slash at the start of a filename
+      when trying to open the file.  It also no longer constructs names
+      that start with a double slash (unless the user supplied them).
+
+    - Path-specifying options to a daemon should now work the same with
+      or without chroot turned on.  Previously, such a option (such as
+      --link-dest) would get its absolute path munged into a relative
+      one if chroot was not on, making that setting fairly useless.
+      Rsync now transforms the path into one that is based on the
+      module's base dir when chroot is not enabled.
+
+    - Fixed a compatibility problem interacting with older rsync
+      versions that might send us an empty --suffix value without
+      telling us that --backup-dir was specified.
+
+    - The "hosts allow" option for a daemon-over-remote-shell process
+      now has improved support for IPv6 addresses and a fix for systems
+      that have a length field in their socket structs.
+
+    - Fixed the ability to request an empty backup --suffix when sending
+      files to an rsync daemon.
+
+  INTERNAL:
+
+    - Most of the I/O is now buffered, which results in a pretty large
+      speedup when running under MS Windows.  (Craig Barratt)
+
+    - Optimizations to the name-handling/comparing code have made some
+      significant reductions in user-CPU time for large file sets.
+
+    - Some cleanup of the variable types make the code more consistent.
+
+    - Reduced memory requirements of hard link preservation.
+      (J.W. Schultz)
+
+    - Implemented a new algorithm for hard-link handling that speeds up
+      the code significantly.  (J.W. Schultz and Wayne Davison)
+
+    - The --hard-link option now uses the first existing file in the
+      group of linked files as the basis for the transfer.  This
+      prevents the sub-optimal transfer of a file's data when a new
+      hardlink is added on the sending side and it sorts alphabetically
+      earlier in the list than the files that are already present on the
+      receiving side.
+
+    - Dropped support for protocol versions less than 20 (2.3.0 released
+      15 Mar 1999) and activated warnings for protocols less than 25
+      (2.5.0 released 23 Aug 2001). (Wayne Davison and J.W. Schultz,
+      severally)
+
+    - More optimal data transmission for --hard-links (protocol 28).
+
+    - More optimal data transmission for --checksum (protocol 28).
+
+    - Less memory is used when --checksum is specified.
+
+    - Less memory is used in the file list (a per-file savings).
+
+    - The generator is now better about not modifying the file list
+      during the transfer in order to avoid a copy-on-write memory
+      bifurcation (on systems where fork() uses shared memory).
+      Previously, rsync's shared memory would slowly become unshared,
+      resulting in real memory usage nearly doubling on the receiving
+      side by the end of the transfer.  Now, as long as permissions
+      are being preserved, the shared memory should remain that way
+      for the entire transfer.
+
+    - Changed hardlink info and file_struct + strings to use allocation
+      pools.  This reduces memory use for large file-sets and permits
+      freeing memory to the OS.  (J.W. Schultz) 
+
+    - The 2 pipes used between the receiver and generator processes
+      (which are forked on the same machine) were reduced to 1 pipe and
+      the protocol improved so that (1) it is now impossible to have the
+      "redo" pipe fill up and hang rsync, and (2) trailing messages from
+      the receiver don't get lost on their way through the generator
+      over to the sender (which mainly affected hard-link messages and
+      verbose --stats output).
+
+    - Improved the internal uid/gid code to be more portable and a
+      little more optimized.
+
+    - The device numbers sent when using --devices are now sent as
+      separate major/minor values with 32-bit accuracy (protocol 28).
+      Previously, the copied devices were sent as a single 32-bit
+      number.  This will make inter-operation of 64-bit binaries more
+      compatible with their 32-bit brethren (with both ends of the
+      connection are using protocol 28).  Note that optimizations in the
+      binary protocol for sending the device numbers often results in
+      fewer bytes being used than before, even though more precision is
+      now available.
+
+    - Some cleanup of the exclude/include structures and its code made
+      things clearer (internally), simpler, and more efficient.
+
+    - The reading & writing of the file-list in batch-mode is now
+      handled by the same code that sends & receives the list over the
+      wire.  This makes it much easier to maintain.  (Note that the
+      batch code is still considered to be experimental.)
+
+  BUILD CHANGES:
+
+    - The configure script now accepts --with-rsyncd-conf=PATH to
+      override the default value of the /etc/rsyncd.conf file.
+
+    - Fixed configure bug when running "./configure --disable-ipv6".
+
+    - Fixed compilation problem on Tru64 Unix (having to do with
+      sockaddr.sa_len and sockaddr.sin_len).
+
+  DEVELOPER RELATED:
+
+    - Fixed "make test" bug when build dir is not the source dir.
+
+    - Added a couple extra diffs in the "patches" dir, removed the ones
+      that got applied, and rebuilt the rest.
+
+
 NEWS for rsync 2.6.0 (1 Jan 2004)
 Protocol: 27 (changed)
 Changes since 2.5.7:
@@ -552,7 +1042,11 @@ Changes since 2.4.6:
       build farm.
 
 Partial Protocol History
-	RELEASE DATE	VER.	DATE OF COMMIT	PROTOCOL
+	RELEASE DATE	VER.	DATE OF COMMIT*	PROTOCOL
+	30 Mar 2005	2.6.4	17 Jan 2005	29
+	30 Sep 2004	2.6.3			28
+	30 Apr 2004	2.6.2			28
+	26 Apr 2004	2.6.1	08 Jan 2004	28
 	01 Jan 2004	2.6.0	10 Apr 2003	27 (MAX=40)
 	04 Dec 2003	2.5.7			26
 	26 Jan 2003	2.5.6			26

README

@@ -1,7 +1,7 @@
 WHAT IS RSYNC?
 --------------
 
-rsync is a replacement for rcp that has many more features.
+rsync is a replacement for scp/rcp that has many more features.
 
 rsync uses the "rsync algorithm" which provides a very fast method for
 bringing remote files into sync. It does this by sending just the
@@ -29,9 +29,9 @@ and see the manual for more information.
 SETUP
 -----
 
-Rsync normally uses rsh or ssh for communication.  It does not need to
+Rsync normally uses ssh or rsh for communication.  It does not need to
 be setuid and requires no special privileges for installation.  You
-must, however, have a working rsh or ssh system. Using ssh is
+must, however, have a working ssh or rsh system.  Using ssh is
 recommended for its security features.
 
 Alternatively, rsync can run in `daemon' mode, listening on a socket.
@@ -77,7 +77,7 @@ BUG REPORTS
 
 If you have web access then please look at
 
-  http://rsync.samba.org
+  http://rsync.samba.org/
 
 That page contains links to the current bug list, and information on
 how to report a bug well.  You might also like to try searching the
@@ -86,9 +86,8 @@ mailing list archives at
 
   http://mail-archive.com/rsync@lists.samba.org/
 
-Please send bug reports to 
-
-  rsync@lists.samba.org
+To send a bug report, follow the instructions on the bug-tracking
+page of the web site.
 
 
 CVS TREE
@@ -103,8 +102,7 @@ recent version of cvs then use the following commands:
 
 	cvs -d :pserver:cvs@pserver.samba.org:/cvsroot co rsync
 
-Look at the cvs documentation, or http://samba.org/cvs.html, for more
-details.
+Look at the cvs documentation for more details.
 
 
 COPYRIGHT

TODO

@@ -1,15 +1,9 @@
 -*- indented-text -*-
 
 BUGS ---------------------------------------------------------------
-Fix progress indicator to not corrupt log
-lchmod question	
 Do not rely on having a group called "nobody"
-Incorrect timestamps (Debian #100295)
-Win32
 
 FEATURES ------------------------------------------------------------
-server-imposed bandwidth limits
-rsyncd over ssh
 Use chroot only if supported
 Allow supplementary groups in rsyncd.conf			2002/04/09
 Handling IPv6 on old machines
@@ -21,28 +15,22 @@ SOCKS								2002/01/23
 FAT support
 Allow forcing arbitrary permissions				2002/03/12
 --diff						david.e.sewell	2002/03/15
-Add daemon --no-detach and --no-fork options
+Add daemon --no-fork option
 Create more granular verbosity				jw	2003/05/15
 
 DOCUMENTATION --------------------------------------------------------
-Update README
 Keep list of open issues and todos on the web site
-Update web site from CVS
 Perhaps redo manual as SGML
 
 LOGGING --------------------------------------------------------------
-Make dry run list all updates					2002/04/03
 Memory accounting
 Improve error messages
 Better statistics:					Rasmus	2002/03/08
 Perhaps flush stdout like syslog
 Log deamon sessions that just list modules
 Log child death on signal
-Keep stderr and stdout properly separated (Debian #23626)
 Log errors with function that reports process of origin
 verbose output					David Stein	2001/12/20
-Add reason for transfer to file logging
-debugging of daemon						2002/04/08
 internationalization
 
 DEVELOPMENT --------------------------------------------------------
@@ -50,9 +38,6 @@ Handling duplicate names
 Use generic zlib						2002/02/25
 TDB:								2002/03/12
 Splint								2002/03/12
-Memory debugger
-Create release script
-Add machines to build farm
 
 PERFORMANCE ----------------------------------------------------------
 File list structure in memory
@@ -83,37 +68,6 @@ reverse rsync over HTTP Range
 
 BUGS ---------------------------------------------------------------
 
-Fix progress indicator to not corrupt log
-
-  Progress indicator can produce corrupt output when transferring directories:
-
-  main/binary-arm/
-  main/binary-arm/admin/
-  main/binary-arm/base/
-  main/binary-arm/comm/8.56kB/s    0:00:52
-  main/binary-arm/devel/
-  main/binary-arm/doc/
-  main/binary-arm/editors/
-  main/binary-arm/electronics/s    0:00:53
-  main/binary-arm/games/
-  main/binary-arm/graphics/
-  main/binary-arm/hamradio/
-  main/binary-arm/interpreters/
-  main/binary-arm/libs/6.61kB/s    0:00:54
-  main/binary-arm/mail/
-  main/binary-arm/math/
-  main/binary-arm/misc/
-
-                      --          --
-
-
-lchmod question	
-
-  I don't think we handle this properly on systems that don't have the
-  call.  Are there any such?
-
-                      --          --
-
 
 Do not rely on having a group called "nobody"
 
@@ -123,40 +77,8 @@ Do not rely on having a group called "nobody"
 
                       --          --
 
-
-Incorrect timestamps (Debian #100295)
-
-  A bit hard to believe, but apparently it happens.
-
-                      --          --
-
-
-Win32
-
-  Don't detach, because this messes up --srvany.
-
-  http://sources.redhat.com/ml/cygwin/2001-08/msg00234.html
-
-
-
-                      --          --
-
 FEATURES ------------------------------------------------------------
 
-server-imposed bandwidth limits
-
-                      --          --
-
-
-rsyncd over ssh
-
-  There are already some patches to do this.
-
-  BitKeeper uses a server whose login shell is set to bkd.  That's
-  probably a reasonable approach.
-
-                      --          --
-
 
 Use chroot only if supported
 
@@ -224,14 +146,6 @@ Other IPv6 stuff:
   multiple passive addresses.  This might be a bit harder, because we
   may need to select on all of them.  Hm.
 
-  Define a syntax for IPv6 literal addresses.  Since they include
-  colons, they tend to break most naming systems, including ours.
-  Based on the HTTP IPv6 syntax, I think we should use
- 
-     rsync://[::1]/foo/bar [::1]::bar
-
-  which should just take a small change to the parser code.
-
                       --          --
 
 
@@ -240,6 +154,7 @@ Add ACL support							2001/12/02
   Transfer ACLs.  Need to think of a standard representation.
   Probably better not to even try to convert between NT and POSIX.
   Possibly can share some code with Samba.
+  NOTE: there is a patch that implements this in the "patches" subdir.
 
                       --          --
 
@@ -308,6 +223,8 @@ Allow forcing arbitrary permissions				2002/03/12
 
   (Debian #23628)
 
+  NOTE: there is a patch that implements this in the "patches" subdir.
+
                       --          --
 
 
@@ -326,7 +243,7 @@ Allow forcing arbitrary permissions				2002/03/12
                       --          --
 
 
-Add daemon --no-detach and --no-fork options
+Add daemon --no-fork option
 
   Very useful for debugging.  Also good when running under a
   daemon-monitoring process that tries to restart the service when the
@@ -352,21 +269,12 @@ Create more granular verbosity				jw	2003/05/15
 
 DOCUMENTATION --------------------------------------------------------
 
-Update README
-
-                      --          --
-
 
 Keep list of open issues and todos on the web site
 
                       --          --
 
 
-Update web site from CVS
-
-                      --          --
-
-
 Perhaps redo manual as SGML
 
   The man page is getting rather large, and there is more information
@@ -382,17 +290,6 @@ Perhaps redo manual as SGML
 
 LOGGING --------------------------------------------------------------
 
-Make dry run list all updates					2002/04/03
-
-  --dry-run is too dry
-
-  Mark Santcroos points out that -n fails to list files which have
-  only metadata changes, though it probably should.
-
-  There may be a Debian bug about this as well.
-
-                      --          --
-
 
 Memory accounting
 
@@ -474,11 +371,6 @@ Log child death on signal
                       --          --
 
 
-Keep stderr and stdout properly separated (Debian #23626)
-
-                      --          --
-
-
 Log errors with function that reports process of origin
 
   Use a separate function for reporting errors; prefix it with
@@ -490,29 +382,12 @@ Log errors with function that reports process of origin
 
 verbose output					David Stein	2001/12/20
   
-  Indicate whether files are new, updated, or deleted
-
   At end of transfer, show how many files were or were not transferred
   correctly.
 
                       --          --
 
 
-Add reason for transfer to file logging
-
-  Explain *why* every file is transferred or not (e.g. "local mtime
-  123123 newer than 1283198")
-
-                      --          --
-
-
-debugging of daemon						2002/04/08
-
-  Add an rsyncd.conf parameter to turn on debugging on the server.
-
-                      --          --
-
-
 internationalization
 
   Change to using gettext().  Probably need to ship this for platforms
@@ -530,46 +405,16 @@ DEVELOPMENT --------------------------------------------------------
 
 Handling duplicate names
 
-  We need to be careful of duplicate names getting into the file list.
-  See clean_flist().  This could happen if multiple arguments include
-  the same file.  Bad.
-
-  I think duplicates are only a problem if they're both flowing
-  through the pipeline at the same time.  For example we might have
-  updated the first occurrence after reading the checksums for the
-  second.  So possibly we just need to make sure that we don't have
-  both in the pipeline at the same time.
-
-  Possibly if we did one directory at a time that would be sufficient.
-
-  Alternatively we could pre-process the arguments to make sure no
-  duplicates will ever be inserted.  There could be some bad cases
-  when we're collapsing symlinks.
-
-  We could have a hash table.
-
-  The root of the problem is that we do not want more than one file
-  list entry referring to the same file.  At first glance there are
-  several ways this could happen: symlinks, hardlinks, and repeated
-  names on the command line.
-
-  If names are repeated on the command line, they may be present in
-  different forms, perhaps by traversing directory paths in different
-  ways, traversing paths including symlinks.  Also we need to allow
-  for expansion of globs by rsync.
-
-  At the moment, clean_flist() requires having the entire file list in
-  memory.  Duplicate names are detected just by a string comparison.
-
-  We don't need to worry about hard links causing duplicates because
-  files are never updated in place.  Similarly for symlinks.
-
-  I think even if we're using a different symlink mode we don't need
-  to worry.
-
-  Unless we're really clever this will introduce a protocol
-  incompatibility, so we need to be able to accept the old format as
-  well.
+  Some folks would like rsync to be deterministic in how it handles
+  duplicate names that come from mering multiple source directories
+  into a single destination directory; e.g. the last name wins.  We
+  could do this by switching our sort algorithm to one that will
+  guarantee that the names won't be reordered.  Alternately, we could
+  assign an ever-increasing number to each item as we insert it into
+  the list and then make sure that we leave the largest number when
+  cleaning the file list (see clean_flist()).  Another solution would
+  be to add a hash table, and thus never put any duplicate names into
+  the file list (and bump the protocol to handle this).
 
                       --          --
 
@@ -625,45 +470,6 @@ Splint								2002/03/12
 
                       --          --
 
-
-Memory debugger
-
-  jra recommends Valgrind:
-
-    http://devel-home.kde.org/~sewardj/
-
-                      --          --
-
-
-Create release script
-  
-  Script would:
-
-     Update spec files
-
-     Build tar file; upload
-
-     Send announcement to mailing list and c.o.l.a.
-  
-     Make freshmeat announcement
-
-     Update web site
-
-                      --          --
-
-
-Add machines to build farm
-
-  Cygwin (on different versions of Win32?)
-
-  HP-UX variants (via HP?)
-
-  SCO
-
-
-
-                      --          --
-
 PERFORMANCE ----------------------------------------------------------
 
 File list structure in memory
@@ -698,14 +504,10 @@ Allow skipping MD4 file_sum					2002/04/08
   calculating MD4 checksums uses 90% of CPU and is unlikely to be
   useful.
 
-  Indeed for transfers over zlib or ssh we can also rely on the
-  transport to have quite strong protection against corruption.
-
-  Perhaps we should have an option to disable this,
-  analogous to --whole-file, although it would default to
-  disabled.  The file checksum takes up a definite space in
-  the protocol -- we can either set it to 0, or perhaps just
-  leave it out.
+  We should not allow it to be disabled separately from -W, though
+  as it is the only thing that lets us know when the rsync algorithm
+  got out of sync and messed the file up (i.e. if the basis file
+  changed between checksum generation and reception).
 
                       --          --
 
@@ -848,5 +650,9 @@ reverse rsync over HTTP Range
   Goswin Brederlow suggested this on Debian; I think tridge and I
   talked about it previous in relation to rproxy.
 
+  Addendum:  It looks like someone is working on a version of this:
+
+    http://zsync.moria.org.uk/
+
                       --          --
 

access.c

@@ -26,7 +26,8 @@
 
 static int match_hostname(char *host, char *tok)
 {
-	if (!host || !*host) return 0;
+	if (!host || !*host)
+		return 0;
 	return wildmatch(tok, host);
 }
 
@@ -34,16 +35,16 @@ static int match_binary(char *b1, char *b2, char *mask, int addrlen)
 {
 	int i;
 
-	for (i=0; i<addrlen; i++) {
-		if ((b1[i]^b2[i])&mask[i]) {
+	for (i = 0; i < addrlen; i++) {
+		if ((b1[i] ^ b2[i]) & mask[i])
 			return 0;
-		}
 	}
 
 	return 1;
 }
 
-static void make_mask(char *mask, int plen, int addrlen) {
+static void make_mask(char *mask, int plen, int addrlen)
+{
 	int w, b;
 
 	w = plen >> 3;
@@ -75,22 +76,26 @@ static int match_address(char *addr, char *tok)
 	char *a = NULL, *t = NULL;
 	unsigned int len;
 
-	if (!addr || !*addr) return 0;
+	if (!addr || !*addr)
+		return 0;
 
 	p = strchr(tok,'/');
 	if (p) {
 		*p = '\0';
 		len = p - tok;
-	}
-	else
+	} else
 		len = strlen(tok);
 
 	/* Fail quietly if tok is a hostname (not an address) */
 	if (strspn(tok, ".0123456789") != len
 #ifdef INET6
-	 && !strchr(tok, ':')
+	    && strchr(tok, ':') == NULL
 #endif
-		) return 0;
+	) {
+		if (p)
+			*p = '/';
+		return 0;
+	}
 
 	memset(&hints, 0, sizeof(hints));
 	hints.ai_family = PF_UNSPEC;
@@ -99,17 +104,18 @@ static int match_address(char *addr, char *tok)
 	hints.ai_flags = AI_NUMERICHOST;
 #endif
 
-	gai = getaddrinfo(addr, NULL, &hints, &resa);
-	if (gai) return 0;
+	if (getaddrinfo(addr, NULL, &hints, &resa) != 0) {
+		if (p)
+			*p = '/';
+		return 0;
+	}
 
 	gai = getaddrinfo(tok, NULL, &hints, &rest);
 	if (p)
 		*p++ = '/';
-	if (gai) {
-		rprintf(FERROR,
-			"error matching address %s: %s\n",
-			tok,
-			gai_strerror(gai));
+	if (gai != 0) {
+		rprintf(FLOG, "error matching address %s: %s\n",
+			tok, gai_strerror(gai));
 		freeaddrinfo(resa);
 		return 0;
 	}
@@ -152,7 +158,7 @@ static int match_address(char *addr, char *tok)
 	    }
 #endif
 	default:
-	    rprintf(FERROR,"unknown family %u\n", rest->ai_family);
+	    rprintf(FLOG, "unknown family %u\n", rest->ai_family);
 	    ret = 0;
 	    goto out;
 	}
@@ -169,14 +175,14 @@ static int match_address(char *addr, char *tok)
 #ifdef HAVE_STRTOL
 			bits = strtol(p, &ep, 10);
 			if (!*p || *ep) {
-				rprintf(FERROR,"malformed mask in %s\n", tok);
+				rprintf(FLOG, "malformed mask in %s\n", tok);
 				ret = 0;
 				goto out;
 			}
 #else
 			for (pp = (unsigned char *)p; *pp; pp++) {
 				if (!isascii(*pp) || !isdigit(*pp)) {
-					rprintf(FERROR,"malformed mask in %s\n", tok);
+					rprintf(FLOG, "malformed mask in %s\n", tok);
 					ret = 0;
 					goto out;
 				}
@@ -188,7 +194,7 @@ static int match_address(char *addr, char *tok)
 				goto out;
 			}
 			if (bits < 0 || bits > (addrlen << 3)) {
-				rprintf(FERROR,"malformed mask in %s\n", tok);
+				rprintf(FLOG, "malformed mask in %s\n", tok);
 				ret = 0;
 				goto out;
 			}
@@ -213,12 +219,14 @@ static int access_match(char *list, char *addr, char *host)
 	char *tok;
 	char *list2 = strdup(list);
 
-	if (!list2) out_of_memory("access_match");
+	if (!list2)
+		out_of_memory("access_match");
 
 	strlower(list2);
-	if (host) strlower(host);
+	if (host)
+		strlower(host);
 
-	for (tok=strtok(list2," ,\t"); tok; tok=strtok(NULL," ,\t")) {
+	for (tok = strtok(list2, " ,\t"); tok; tok = strtok(NULL, " ,\t")) {
 		if (match_hostname(host, tok) || match_address(addr, tok)) {
 			free(list2);
 			return 1;
@@ -231,29 +239,25 @@ static int access_match(char *list, char *addr, char *host)
 
 int allow_access(char *addr, char *host, char *allow_list, char *deny_list)
 {
-	/* if theres no deny list and no allow list then allow access */
-	if ((!deny_list || !*deny_list) && (!allow_list || !*allow_list))
-		return 1;
+	if (allow_list && !*allow_list)
+		allow_list = NULL;
+	if (deny_list && !*deny_list)
+		deny_list = NULL;
 
-	/* if there is an allow list but no deny list then allow only hosts
-	   on the allow list */
-	if (!deny_list || !*deny_list)
-		return(access_match(allow_list, addr, host));
+	/* If we match an allow-list item, we always allow access. */
+	if (allow_list) {
+		if (access_match(allow_list, addr, host))
+			return 1;
+		/* For an allow-list w/o a deny-list, disallow non-matches. */
+		if (!deny_list)
+			return 0;
+	}
 
-	/* if theres a deny list but no allow list then allow
-	   all hosts not on the deny list */
-	if (!allow_list || !*allow_list)
-		return(!access_match(deny_list,addr,host));
-
-	/* if there are both type of list then allow all hosts on the
-           allow list */
-	if (access_match(allow_list,addr,host))
-		return 1;
-
-	/* if there are both type of list and it's not on the allow then
-	   allow it if its not on the deny */
-	if (access_match(deny_list,addr,host))
+	/* If we match a deny-list item (and got past any allow-list
+	 * items), we always disallow access. */
+	if (deny_list && access_match(deny_list, addr, host))
 		return 0;
 
+	/* Allow all other access. */
 	return 1;
 }

authenticate.c

@@ -1,17 +1,17 @@
 /* -*- c-file-style: "linux"; -*-
-   
-   Copyright (C) 1998-2000 by Andrew Tridgell 
-   
+
+   Copyright (C) 1998-2000 by Andrew Tridgell
+
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
-   
+
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-   
+
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
@@ -20,6 +20,9 @@
 /* support rsync authentication */
 #include "rsync.h"
 
+extern char *password_file;
+extern int am_root;
+
 /***************************************************************************
 encode a buffer using base64 - simple and slow algorithm. null terminates
 the result.
@@ -54,7 +57,7 @@ static void gen_challenge(char *addr, char *challenge)
 	char input[32];
 	struct timeval tv;
 
-	memset(input, 0, sizeof(input));
+	memset(input, 0, sizeof input);
 
 	strlcpy((char *)input, addr, 17);
 	sys_gettimeofday(&tv);
@@ -62,121 +65,132 @@ static void gen_challenge(char *addr, char *challenge)
 	SIVAL(input, 20, tv.tv_usec);
 	SIVAL(input, 24, getpid());
 
-	sum_init();
-	sum_update(input, sizeof(input));
+	sum_init(0);
+	sum_update(input, sizeof input);
 	sum_end(challenge);
 }
 
 
-/* return the secret for a user from the sercret file. maximum length
-   is len. null terminate it */
+/* Return the secret for a user from the secret file, null terminated.
+ * Maximum length is len (not counting the null). */
 static int get_secret(int module, char *user, char *secret, int len)
 {
 	char *fname = lp_secrets_file(module);
-	int fd, found=0;
-	char line[MAXPATHLEN];
-	char *p, *pass=NULL;
 	STRUCT_STAT st;
-	int ok = 1;
-	extern int am_root;
+	int fd, ok = 1;
+	char ch, *p;
 
-	if (!fname || !*fname) return 0;
+	if (!fname || !*fname)
+		return 0;
 
-	fd = open(fname,O_RDONLY);
-	if (fd == -1) return 0;
+	if ((fd = open(fname, O_RDONLY)) < 0)
+		return 0;
 
 	if (do_stat(fname, &st) == -1) {
-		rsyserr(FERROR, errno, "stat(%s)", fname);
+		rsyserr(FLOG, errno, "stat(%s)", safe_fname(fname));
 		ok = 0;
 	} else if (lp_strict_modes(module)) {
 		if ((st.st_mode & 06) != 0) {
-			rprintf(FERROR,"secrets file must not be other-accessible (see strict modes option)\n");
+			rprintf(FLOG, "secrets file must not be other-accessible (see strict modes option)\n");
 			ok = 0;
 		} else if (am_root && (st.st_uid != 0)) {
-			rprintf(FERROR,"secrets file must be owned by root when running as root (see strict modes)\n");
+			rprintf(FLOG, "secrets file must be owned by root when running as root (see strict modes)\n");
 			ok = 0;
 		}
 	}
 	if (!ok) {
-		rprintf(FERROR,"continuing without secrets file\n");
+		rprintf(FLOG, "continuing without secrets file\n");
 		close(fd);
 		return 0;
 	}
 
-	while (!found) {
-		int i = 0;
-		memset(line, 0, sizeof line);
-		while ((size_t) i < (sizeof(line)-1)) {
-			if (read(fd, &line[i], 1) != 1) {
-				memset(line, 0, sizeof(line));
-				close(fd);
-				return 0;
-			}
-			if (line[i] == '\r') continue;
-			if (line[i] == '\n') break;
-			i++;
-		}
-		line[i] = 0;
-		if (line[0] == '#') continue;
-		p = strchr(line,':');
-		if (!p) continue;
-		*p = 0;
-		if (strcmp(user, line)) continue;
-		pass = p+1;
-		found = 1;
+	if (*user == '#') {
+		/* Reject attempt to match a comment. */
+		close(fd);
+		return 0;
 	}
 
-	close(fd);
-	if (!found) return 0;
+	/* Try to find a line that starts with the user name and a ':'. */
+	p = user;
+	while (1) {
+		if (read(fd, &ch, 1) != 1) {
+			close(fd);
+			return 0;
+		}
+		if (ch == '\n')
+			p = user;
+		else if (p) {
+			if (*p == ch)
+				p++;
+			else if (!*p && ch == ':')
+				break;
+			else
+				p = NULL;
+		}
+	}
+
+	/* Slurp the secret into the "secret" buffer. */
+	p = secret;
+	while (len > 0) {
+		if (read(fd, p, 1) != 1 || *p == '\n')
+			break;
+		if (*p == '\r')
+			continue;
+		p++;
+		len--;
+	}
+	*p = '\0';
+	close(fd);
 
-	strlcpy(secret, pass, len);
 	return 1;
 }
 
 static char *getpassf(char *filename)
 {
-	char buffer[100];
-	int fd=0;
 	STRUCT_STAT st;
-	int ok = 1;
-	extern int am_root;
-	char *envpw=getenv("RSYNC_PASSWORD");
+	char buffer[512], *p;
+	int fd, n, ok = 1;
+	char *envpw = getenv("RSYNC_PASSWORD");
 
-	if (!filename) return NULL;
+	if (!filename)
+		return NULL;
 
-	if ( (fd=open(filename,O_RDONLY)) == -1) {
-		rsyserr(FERROR, errno, "could not open password file \"%s\"",filename);
-		if (envpw) rprintf(FERROR,"falling back to RSYNC_PASSWORD environment variable.\n");	
+	if ((fd = open(filename,O_RDONLY)) < 0) {
+		rsyserr(FERROR, errno, "could not open password file \"%s\"",
+			safe_fname(filename));
+		if (envpw)
+			rprintf(FERROR, "falling back to RSYNC_PASSWORD environment variable.\n");
 		return NULL;
 	}
-	
+
 	if (do_stat(filename, &st) == -1) {
-		rsyserr(FERROR, errno, "stat(%s)", filename);
+		rsyserr(FERROR, errno, "stat(%s)", safe_fname(filename));
 		ok = 0;
 	} else if ((st.st_mode & 06) != 0) {
 		rprintf(FERROR,"password file must not be other-accessible\n");
 		ok = 0;
-	} else if (am_root && (st.st_uid != 0)) {
+	} else if (am_root && st.st_uid != 0) {
 		rprintf(FERROR,"password file must be owned by root when running as root\n");
 		ok = 0;
 	}
 	if (!ok) {
 		rprintf(FERROR,"continuing without password file\n");
-		if (envpw) rprintf(FERROR,"using RSYNC_PASSWORD environment variable.\n");
+		if (envpw)
+			rprintf(FERROR, "using RSYNC_PASSWORD environment variable.\n");
 		close(fd);
 		return NULL;
 	}
 
-	if (envpw) rprintf(FERROR,"RSYNC_PASSWORD environment variable ignored\n");
+	if (envpw)
+		rprintf(FERROR, "RSYNC_PASSWORD environment variable ignored\n");
 
-	buffer[sizeof(buffer)-1]='\0';
-	if (read(fd,buffer,sizeof(buffer)-1) > 0)
-	{
-		char *p = strtok(buffer,"\n\r");
-		close(fd);
-		if (p) p = strdup(p);
-		return p;
-	}	
+	n = read(fd, buffer, sizeof buffer - 1);
+	close(fd);
+	if (n > 0) {
+		buffer[n] = '\0';
+		if ((p = strtok(buffer, "\n\r")) != NULL)
+			return strdup(p);
+	}
 
 	return NULL;
 }
@@ -186,7 +200,7 @@ static void generate_hash(char *in, char *challenge, char *out)
 {
 	char buf[16];
 
-	sum_init();
+	sum_init(0);
 	sum_update(in, strlen(in));
 	sum_update(challenge, strlen(challenge));
 	sum_end(buf);
@@ -194,15 +208,12 @@ static void generate_hash(char *in, char *challenge, char *out)
 	base64_encode(buf, 16, out);
 }
 
-/* possible negotiate authentication with the client. Use "leader" to
-   start off the auth if necessary 
-
-   return NULL if authentication failed
-
-   return "" if anonymous access
-
-   otherwise return username
-*/
+/* Possibly negotiate authentication with the client.  Use "leader" to
+ * start off the auth if necessary.
+ *
+ * Return NULL if authentication failed.  Return "" if anonymous access.
+ * Otherwise return username.
+ */
 char *auth_server(int f_in, int f_out, int module, char *addr, char *leader)
 {
 	char *users = lp_auth_users(module);
@@ -216,46 +227,46 @@ char *auth_server(int f_in, int f_out, int module, char *addr, char *leader)
 	char *tok;
 
 	/* if no auth list then allow anyone in! */
-	if (!users || !*users) return "";
+	if (!users || !*users)
+		return "";
 
 	gen_challenge(addr, challenge);
-	
+
 	base64_encode(challenge, 16, b64_challenge);
 
 	io_printf(f_out, "%s%s\n", leader, b64_challenge);
 
-	if (!read_line(f_in, line, sizeof(line)-1)) {
+	if (!read_line(f_in, line, sizeof line - 1))
 		return NULL;
-	}
 
-	memset(user, 0, sizeof(user));
-	memset(pass, 0, sizeof(pass));
+	memset(user, 0, sizeof user);
+	memset(pass, 0, sizeof pass);
 
-	if (sscanf(line,"%99s %29s", user, pass) != 2) {
+	if (sscanf(line,"%99s %29s", user, pass) != 2)
 		return NULL;
-	}
-	
+
 	users = strdup(users);
-	if (!users) return NULL;
+	if (!users)
+		return NULL;
 
 	for (tok=strtok(users," ,\t"); tok; tok = strtok(NULL," ,\t")) {
-		if (wildmatch(tok, user)) break;
+		if (wildmatch(tok, user))
+			break;
 	}
 	free(users);
 
-	if (!tok) {
+	if (!tok)
 		return NULL;
-	}
-	
-	memset(secret, 0, sizeof(secret));
-	if (!get_secret(module, user, secret, sizeof(secret)-1)) {
-		memset(secret, 0, sizeof(secret));
+
+	memset(secret, 0, sizeof secret);
+	if (!get_secret(module, user, secret, sizeof secret - 1)) {
+		memset(secret, 0, sizeof secret);
 		return NULL;
 	}
 
 	generate_hash(secret, b64_challenge, pass2);
-	memset(secret, 0, sizeof(secret));
-	
+	memset(secret, 0, sizeof secret);
+
 	if (strcmp(pass, pass2) == 0)
 		return user;
 
@@ -267,12 +278,12 @@ void auth_client(int fd, char *user, char *challenge)
 {
 	char *pass;
 	char pass2[30];
-	extern char *password_file;
 
 	if (!user || !*user)
 		user = "nobody";
 
-	if (!(pass=getpassf(password_file)) && !(pass=getenv("RSYNC_PASSWORD"))) {
+	if (!(pass = getpassf(password_file))
+	 && !(pass = getenv("RSYNC_PASSWORD"))) {
 		/* XXX: cyeoh says that getpass is deprecated, because
 		 * it may return a truncated password on some systems,
 		 * and it is not in the LSB.
@@ -285,9 +296,8 @@ void auth_client(int fd, char *user, char *challenge)
 		pass = getpass("Password: ");
 	}
 
-	if (!pass || !*pass) {
+	if (!pass)
 		pass = "";
-	}
 
 	generate_hash(pass, challenge, pass2);
 	io_printf(fd, "%s %s\n", user, pass2);

backup.c

@@ -33,27 +33,59 @@ extern int preserve_devices;
 extern int preserve_links;
 extern int preserve_hard_links;
 extern int orig_umask;
+extern int safe_symlinks;
+
+/* make a complete pathname for backup file */
+char *get_backup_name(char *fname)
+{
+	if (backup_dir) {
+		if (stringjoin(backup_dir_buf + backup_dir_len, backup_dir_remainder,
+			       fname, backup_suffix, NULL) < backup_dir_remainder)
+			return backup_dir_buf;
+	} else {
+		if (stringjoin(backup_dir_buf, MAXPATHLEN,
+			       fname, backup_suffix, NULL) < MAXPATHLEN)
+			return backup_dir_buf;
+	}
+
+	rprintf(FERROR, "backup filename too long\n");
+	return NULL;
+}
 
 /* simple backup creates a backup with a suffix in the same directory */
 static int make_simple_backup(char *fname)
 {
-	char fnamebak[MAXPATHLEN];
+	int rename_errno;
+	char *fnamebak = get_backup_name(fname);
 
-	if (stringjoin(fnamebak, sizeof fnamebak, fname, backup_suffix, NULL)
-	    >= sizeof fnamebak) {
-		rprintf(FERROR, "backup filename too long\n");
+	if (!fnamebak)
+		return 0;
+
+	while (1) {
+		if (do_rename(fname, fnamebak) == 0) {
+			if (verbose > 1) {
+				rprintf(FINFO, "backed up %s to %s\n",
+					safe_fname(fname),
+					safe_fname(fnamebak));
+			}
+			break;
+		}
+		/* cygwin (at least version b19) reports EINVAL */
+		if (errno == ENOENT || errno == EINVAL)
+			break;
+
+		rename_errno = errno;
+		if (errno == EISDIR && do_rmdir(fnamebak) == 0)
+			continue;
+		if (errno == ENOTDIR && do_unlink(fnamebak) == 0)
+			continue;
+
+		rsyserr(FERROR, rename_errno, "rename %s to backup %s",
+			safe_fname(fname), safe_fname(fnamebak));
+		errno = rename_errno;
 		return 0;
 	}
 
-	if (do_rename(fname, fnamebak) != 0) {
-		/* cygwin (at least version b19) reports EINVAL */
-		if (errno != ENOENT && errno != EINVAL) {
-			rsyserr(FERROR, errno, "rename %s to backup %s", fname, fnamebak);
-			return 0;
-		}
-	} else if (verbose > 1) {
-		rprintf(FINFO, "backed up %s to %s\n", fname, fnamebak);
-	}
 	return 1;
 }
 
@@ -83,9 +115,9 @@ static int make_bak_dir(char *fullpath)
 			if (do_mkdir(fullpath, 0777 & ~orig_umask) == 0)
 				break;
 			if (errno != ENOENT) {
-				rprintf(FERROR,
-				    "make_bak_dir mkdir %s failed: %s\n",
-				    full_fname(fullpath), strerror(errno));
+				rsyserr(FERROR, errno,
+					"make_bak_dir mkdir %s failed",
+					full_fname(fullpath));
 				goto failure;
 			}
 		}
@@ -96,12 +128,11 @@ static int make_bak_dir(char *fullpath)
 		if (p >= rel) {
 			/* Try to transfer the directory settings of the
 			 * actual dir that the files are coming from. */
-			if (do_lstat(rel, &st) != 0) {
-				rprintf(FERROR,
-				    "make_bak_dir stat %s failed: %s\n",
-				    full_fname(rel), strerror(errno));
+			if (do_stat(rel, &st) < 0) {
+				rsyserr(FERROR, errno,
+					"make_bak_dir stat %s failed",
+					full_fname(rel));
 			} else {
-				set_modtime(fullpath, st.st_mtime);
 				do_lchown(fullpath, st.st_uid, st.st_gid);
 				do_chmod(fullpath, st.st_mode);
 			}
@@ -111,9 +142,8 @@ static int make_bak_dir(char *fullpath)
 		if (p == end)
 			break;
 		if (do_mkdir(fullpath, 0777 & ~orig_umask) < 0) {
-			rprintf(FERROR,
-			    "make_bak_dir mkdir %s failed: %s\n",
-			    full_fname(fullpath), strerror(errno));
+			rsyserr(FERROR, errno, "make_bak_dir mkdir %s failed",
+				full_fname(fullpath));
 			goto failure;
 		}
 	}
@@ -143,53 +173,48 @@ static int keep_backup(char *fname)
 {
 	STRUCT_STAT st;
 	struct file_struct *file;
+	char *buf;
 	int kept = 0;
 	int ret_code;
 
 	/* return if no file to keep */
-#if SUPPORT_LINKS
-	if (do_lstat(fname, &st)) return 1;
-#else
-	if (do_stat(fname, &st)) return 1;
-#endif
+	if (do_lstat(fname, &st) < 0)
+		return 1;
 
-	file = make_file(fname, NULL, NO_EXCLUDES);
+	if (!(file = make_file(fname, NULL, NO_FILTERS)))
+		return 1; /* the file could have disappeared */
 
-	/* the file could have disappeared */
-	if (!file) return 1;
-
-	/* make a complete pathname for backup file */
-	if (stringjoin(backup_dir_buf + backup_dir_len, backup_dir_remainder,
-	    fname, backup_suffix, NULL) >= backup_dir_remainder) {
-		rprintf(FERROR, "keep_backup filename too long\n");
+	if (!(buf = get_backup_name(fname)))
 		return 0;
-	}
 
-#ifdef HAVE_MKNOD
 	/* Check to see if this is a device file, or link */
 	if (IS_DEVICE(file->mode)) {
 		if (am_root && preserve_devices) {
-			make_bak_dir(backup_dir_buf);
-			if (do_mknod(backup_dir_buf, file->mode, file->u.rdev) != 0) {
-				rprintf(FERROR, "mknod %s failed: %s\n",
-					full_fname(backup_dir_buf), strerror(errno));
+			if (do_mknod(buf, file->mode, file->u.rdev) < 0
+			    && (errno != ENOENT || make_bak_dir(buf) < 0
+			     || do_mknod(buf, file->mode, file->u.rdev) < 0)) {
+				rsyserr(FERROR, errno, "mknod %s failed",
+					full_fname(buf));
 			} else if (verbose > 2) {
 				rprintf(FINFO,
 					"make_backup: DEVICE %s successful.\n",
-					fname);
+					safe_fname(fname));
 			}
 		}
 		kept = 1;
 		do_unlink(fname);
 	}
-#endif
 
 	if (!kept && S_ISDIR(file->mode)) {
 		/* make an empty directory */
-		make_bak_dir(backup_dir_buf);
-		do_mkdir(backup_dir_buf, file->mode);
-		ret_code = do_rmdir(fname);
+		if (do_mkdir(buf, file->mode) < 0
+		    && (errno != ENOENT || make_bak_dir(buf) < 0
+		     || do_mkdir(buf, file->mode) < 0)) {
+			rsyserr(FINFO, errno, "mkdir %s failed",
+				full_fname(buf));
+		}
 
+		ret_code = do_rmdir(fname);
 		if (verbose > 2) {
 			rprintf(FINFO, "make_backup: RMDIR %s returns %i\n",
 				full_fname(fname), ret_code);
@@ -197,20 +222,20 @@ static int keep_backup(char *fname)
 		kept = 1;
 	}
 
-#if SUPPORT_LINKS
+#ifdef SUPPORT_LINKS
 	if (!kept && preserve_links && S_ISLNK(file->mode)) {
-		extern int safe_symlinks;
-		if (safe_symlinks && unsafe_symlink(file->u.link, backup_dir_buf)) {
+		if (safe_symlinks && unsafe_symlink(file->u.link, buf)) {
 			if (verbose) {
 				rprintf(FINFO, "ignoring unsafe symlink %s -> %s\n",
-					full_fname(backup_dir_buf), file->u.link);
+					full_fname(buf), file->u.link);
 			}
 			kept = 1;
 		}
-		make_bak_dir(backup_dir_buf);
-		if (do_symlink(file->u.link, backup_dir_buf) != 0) {
-			rprintf(FERROR, "link %s -> %s : %s\n",
-				full_fname(backup_dir_buf), file->u.link, strerror(errno));
+		if (do_symlink(file->u.link, buf) < 0
+		    && (errno != ENOENT || make_bak_dir(buf) < 0
+		     || do_symlink(file->u.link, buf) < 0)) {
+			rsyserr(FERROR, errno, "link %s -> \"%s\"",
+				full_fname(buf), safe_fname(file->u.link));
 		}
 		do_unlink(fname);
 		kept = 1;
@@ -219,21 +244,28 @@ static int keep_backup(char *fname)
 
 	if (!kept && !S_ISREG(file->mode)) {
 		rprintf(FINFO, "make_bak: skipping non-regular file %s\n",
-			fname);
+			safe_fname(fname));
+		return 1;
 	}
 
 	/* move to keep tree if a file */
 	if (!kept) {
-		if (robust_move(fname, backup_dir_buf) != 0) {
-			rprintf(FERROR, "keep_backup failed: %s -> \"%s\": %s\n",
-				full_fname(fname), backup_dir_buf, strerror(errno));
+		if (robust_move(fname, buf) != 0) {
+			rsyserr(FERROR, errno, "keep_backup failed: %s -> \"%s\"",
+				full_fname(fname), safe_fname(buf));
+		} else if (st.st_nlink > 1) {
+			/* If someone has hard-linked the file into the backup
+			 * dir, rename() might return success but do nothing! */
+			robust_unlink(fname); /* Just in case... */
 		}
 	}
-	set_perms(backup_dir_buf, file, NULL, 0);
+	set_perms(buf, file, NULL, 0);
 	free(file);
 
-	if (verbose > 1)
-		rprintf(FINFO, "keep_backup %s -> %s\n", fname, backup_dir_buf);
+	if (verbose > 1) {
+		rprintf(FINFO, "backed up %s to %s\n",
+			safe_fname(fname), safe_fname(buf));
+	}
 	return 1;
 }
 

batch.c

@@ -8,329 +8,194 @@
 #include "rsync.h"
 #include <time.h>
 
-extern char *batch_prefix;
-extern int csum_length;
+extern int am_sender;
+extern int eol_nulls;
+extern int recurse;
+extern int xfer_dirs;
+extern int preserve_links;
+extern int preserve_hard_links;
+extern int preserve_devices;
+extern int preserve_uid;
+extern int preserve_gid;
+extern int always_checksum;
+extern int do_compression;
 extern int protocol_version;
-extern struct stats stats;
+extern char *batch_name;
 
-struct file_list *batch_flist;
+extern struct filter_list_struct filter_list;
 
-static char rsync_flist_file[] = ".rsync_flist";
-static char rsync_csums_file[] = ".rsync_csums";
-static char rsync_delta_file[] = ".rsync_delta";
-static char rsync_argvs_file[] = ".rsync_argvs";
+static int *flag_ptr[] = {
+	&recurse,		/* 0 */
+	&preserve_uid,		/* 1 */
+	&preserve_gid,		/* 2 */
+	&preserve_links,	/* 3 */
+	&preserve_devices,	/* 4 */
+	&preserve_hard_links,	/* 5 */
+	&always_checksum,	/* 6 */
+	&xfer_dirs,		/* 7 (protocol 29) */
+	&do_compression,	/* 8 (protocol 29) */
+	NULL
+};
 
-static int f_csums = -1;
-static int f_delta = -1;
+static char *flag_name[] = {
+	"--recurse (-r)",
+	"--owner (-o)",
+	"--group (-g)",
+	"--links (-l)",
+	"--devices (-D)",
+	"--hard-links (-H)",
+	"--checksum (-c)",
+	"--dirs (-d)",
+	"--compress (-z)",
+	NULL
+};
 
-void write_batch_flist_info(int flist_count, struct file_struct **files)
+void write_stream_flags(int fd)
 {
-	char filename[MAXPATHLEN];
-	int i, f, save_pv;
-	int64 save_written;
+	int i, flags;
 
-	stringjoin(filename, sizeof filename,
-	    batch_prefix, rsync_flist_file, NULL);
-
-	f = do_open(filename, O_WRONLY | O_CREAT | O_TRUNC, S_IRUSR | S_IWUSR);
-	if (f < 0) {
-		rprintf(FERROR, "Batch file %s open error: %s\n",
-		    filename, strerror(errno));
-		exit_cleanup(1);
+	/* Start the batch file with a bitmap of data-stream-affecting
+	 * flags. */
+	if (protocol_version < 29)
+		flag_ptr[7] = NULL;
+	for (i = 0, flags = 0; flag_ptr[i]; i++) {
+		if (*flag_ptr[i])
+			flags |= 1 << i;
 	}
-
-	save_written = stats.total_written;
-	save_pv = protocol_version;
-	protocol_version = PROTOCOL_VERSION;
-	write_int(f, protocol_version);
-	write_int(f, flist_count);
-
-	for (i = 0; i < flist_count; i++) {
-		send_file_entry(files[i], f,
-		    files[i]->flags & FLAG_TOP_DIR ?  XMIT_TOP_DIR : 0);
-	}
-	send_file_entry(NULL, f, 0);
-
-	protocol_version = save_pv;
-	stats.total_written = save_written;
-
-	close(f);
+	write_int(fd, flags);
 }
 
-
-void write_batch_argvs_file(int argc, char *argv[])
+void read_stream_flags(int fd)
 {
-	int f;
-	int i;
-	char buff[256]; /* XXX */
-	char buff2[MAXPATHLEN + 6];
-	char filename[MAXPATHLEN];
+	int i, flags;
+
+	if (protocol_version < 29)
+		flag_ptr[7] = NULL;
+	for (i = 0, flags = read_int(fd); flag_ptr[i]; i++) {
+		int set = flags & (1 << i) ? 1 : 0;
+		if (*flag_ptr[i] != set) {
+			if (verbose) {
+				rprintf(FINFO,
+					"%sing the %s option to match the batchfile.\n",
+					set ? "Sett" : "Clear", flag_name[i]);
+			}
+			*flag_ptr[i] = set;
+		}
+	}
+	if (protocol_version < 29) {
+		if (recurse)
+			xfer_dirs |= 1;
+		else if (xfer_dirs < 2)
+			xfer_dirs = 0;
+	}
+}
+
+static void write_arg(int fd, char *arg)
+{
+	char *x, *s;
+
+	if (*arg == '-' && (x = strchr(arg, '=')) != NULL) {
+		write(fd, arg, x - arg + 1);
+		arg += x - arg + 1;
+	}
+
+	if (strpbrk(arg, " \"'&;|[]()$#!*?^\\") != NULL) {
+		write(fd, "'", 1);
+		for (s = arg; (x = strchr(s, '\'')) != NULL; s = x + 1) {
+			write(fd, s, x - s + 1);
+			write(fd, "'", 1);
+		}
+		write(fd, s, strlen(s));
+		write(fd, "'", 1);
+		return;
+	}
+
+	write(fd, arg, strlen(arg));
+}
+
+static void write_filter_rules(int fd)
+{
+	struct filter_struct *ent;
+
+	write_sbuf(fd, " <<'#E#'\n");
+	for (ent = filter_list.head; ent; ent = ent->next) {
+		unsigned int plen;
+		char *p = get_rule_prefix(ent->match_flags, "- ", 0, &plen);
+		write_buf(fd, p, plen);
+		write_sbuf(fd, ent->pattern);
+		if (ent->match_flags & MATCHFLG_DIRECTORY)
+			write_byte(fd, '/');
+		write_byte(fd, eol_nulls ? 0 : '\n');
+	}
+	if (eol_nulls)
+		write_sbuf(fd, ";\n");
+	write_sbuf(fd, "#E#");
+}
+
+/* This routine tries to write out an equivalent --read-batch command
+ * given the user's --write-batch args.  However, it doesn't really
+ * understand most of the options, so it uses some overly simple
+ * heuristics to munge the command line into something that will
+ * (hopefully) work. */
+void write_batch_shell_file(int argc, char *argv[], int file_arg_cnt)
+{
+	int fd, i;
+	char *p, filename[MAXPATHLEN];
 
 	stringjoin(filename, sizeof filename,
-	    batch_prefix, rsync_argvs_file, NULL);
-
-	f = do_open(filename, O_WRONLY | O_CREAT | O_TRUNC,
-	    S_IRUSR | S_IWUSR | S_IEXEC);
-	if (f < 0) {
-		rprintf(FERROR, "Batch file %s open error: %s\n",
-		    filename, strerror(errno));
+		   batch_name, ".sh", NULL);
+	fd = do_open(filename, O_WRONLY | O_CREAT | O_TRUNC,
+		     S_IRUSR | S_IWUSR | S_IEXEC);
+	if (fd < 0) {
+		rsyserr(FERROR, errno, "Batch file %s open error",
+			safe_fname(filename));
 		exit_cleanup(1);
 	}
-	buff[0] = '\0';
 
-	/* Write argvs info to batch file */
-
-	for (i = 0; i < argc; ++i) {
-		if (i == argc - 2) /* Skip source directory on cmdline */
+	/* Write argvs info to BATCH.sh file */
+	write_arg(fd, argv[0]);
+	if (filter_list.head) {
+		if (protocol_version >= 29)
+			write_sbuf(fd, " --filter=._-");
+		else
+			write_sbuf(fd, " --exclude-from=-");
+	}
+	for (i = 1; i < argc - file_arg_cnt; i++) {
+		p = argv[i];
+		if (strncmp(p, "--files-from", 12) == 0
+		    || strncmp(p, "--filter", 8) == 0
+		    || strncmp(p, "--include", 9) == 0
+		    || strncmp(p, "--exclude", 9) == 0) {
+			if (strchr(p, '=') == NULL)
+				i++;
 			continue;
-		/*
-		 * FIXME:
-		 * I think directly manipulating argv[] is probably bogus
-		 */
-		if (!strncmp(argv[i], "--write-batch",
-		    strlen("--write-batch"))) {
-			/* Safer to change it here than script */
-			/*
-			 * Change to --read-batch=prefix
-			 * to get ready for remote
-			 */
-			strlcat(buff, "--read-batch=", sizeof buff);
-			strlcat(buff, batch_prefix, sizeof buff);
+		}
+		if (strcmp(p, "-f") == 0) {
+			i++;
+			continue;
+		}
+		write(fd, " ", 1);
+		if (strncmp(p, "--write-batch", 13) == 0) {
+			write(fd, "--read-batch", 12);
+			if (p[13] == '=') {
+				write(fd, "=", 1);
+				write_arg(fd, p + 14);
+			}
 		} else
-		if (i == argc - 1) {
-			snprintf(buff2, sizeof buff2, "${1:-%s}", argv[i]);
-			strlcat(buff, buff2, sizeof buff);
-		}
-		else {
-			strlcat(buff, argv[i], sizeof buff);
-		}
-
-		if (i < (argc - 1)) {
-			strlcat(buff, " ", sizeof buff);
-		}
+			write_arg(fd, p);
 	}
-	strlcat(buff, "\n", sizeof buff);
-	if (!write(f, buff, strlen(buff))) {
-		rprintf(FERROR, "Batch file %s write error: %s\n",
-		    filename, strerror(errno));
-		close(f);
+	if (!(p = check_for_hostspec(argv[argc - 1], &p, &i)))
+		p = argv[argc - 1];
+	write(fd, " ${1:-", 6);
+	write_arg(fd, p);
+	write_byte(fd, '}');
+	if (filter_list.head)
+		write_filter_rules(fd);
+	if (write(fd, "\n", 1) != 1 || close(fd) < 0) {
+		rsyserr(FERROR, errno, "Batch file %s write error",
+			safe_fname(filename));
 		exit_cleanup(1);
 	}
-	close(f);
-}
-
-struct file_list *create_flist_from_batch(void)
-{
-	char filename[MAXPATHLEN];
-	unsigned short flags;
-	int i, f, save_pv;
-	int64 save_read;
-
-	stringjoin(filename, sizeof filename,
-	    batch_prefix, rsync_flist_file, NULL);
-
-	f = do_open(filename, O_RDONLY, 0);
-	if (f < 0) {
-		rprintf(FERROR, "Batch file %s open error: %s\n",
-		    filename, strerror(errno));
-		exit_cleanup(1);
-	}
-
-	batch_flist = flist_new(WITH_HLINK, "create_flist_from_batch");
-
-	save_read = stats.total_read;
-	save_pv = protocol_version;
-	protocol_version = read_int(f);
-
-	batch_flist->count = read_int(f);
-	flist_expand(batch_flist);
-
-	for (i = 0; (flags = read_byte(f)) != 0; i++) {
-		if (protocol_version >= 28 && (flags & XMIT_EXTENDED_FLAGS))
-			flags |= read_byte(f) << 8;
-		receive_file_entry(&batch_flist->files[i], flags, batch_flist, f);
-	}
-	receive_file_entry(NULL, 0, NULL, 0); /* Signal that we're done. */
-
-	protocol_version = save_pv;
-	stats.total_read = save_read;
-
-	return batch_flist;
-}
-
-void write_batch_csums_file(void *buff, int bytes_to_write)
-{
-	if (write(f_csums, buff, bytes_to_write) < 0) {
-		rprintf(FERROR, "Batch file write error: %s\n",
-		    strerror(errno));
-		close(f_csums);
-		exit_cleanup(1);
-	}
-}
-
-void close_batch_csums_file(void)
-{
-	close(f_csums);
-	f_csums = -1;
-}
-
-
-/**
- * Write csum info to batch file
- *
- * @todo This will break if s->count is ever larger than maxint.  The
- * batch code should probably be changed to consistently use the
- * variable-length integer routines, which is probably a compatible
- * change.
- **/
-void write_batch_csum_info(int *flist_entry, struct sum_struct *s)
-{
-	size_t i;
-	int int_count;
-	char filename[MAXPATHLEN];
-
-	if (f_csums < 0) {
-		stringjoin(filename, sizeof filename,
-		    batch_prefix, rsync_csums_file, NULL);
-
-		f_csums = do_open(filename, O_WRONLY | O_CREAT | O_TRUNC,
-		    S_IRUSR | S_IWUSR);
-		if (f_csums < 0) {
-			rprintf(FERROR, "Batch file %s open error: %s\n",
-			    filename, strerror(errno));
-			close(f_csums);
-			exit_cleanup(1);
-		}
-	}
-
-	write_batch_csums_file(flist_entry, sizeof (int));
-	int_count = s ? (int) s->count : 0;
-	write_batch_csums_file(&int_count, sizeof int_count);
-
-	if (s) {
-		for (i = 0; i < s->count; i++) {
-			write_batch_csums_file(&s->sums[i].sum1,
-			    sizeof (uint32));
-			write_batch_csums_file(s->sums[i].sum2, csum_length);
-		}
-	}
-}
-
-int read_batch_csums_file(char *buff, int len)
-{
-	int bytes_read;
-
-	if ((bytes_read = read(f_csums, buff, len)) < 0) {
-		rprintf(FERROR, "Batch file read error: %s\n", strerror(errno));
-		close(f_csums);
-		exit_cleanup(1);
-	}
-	return bytes_read;
-}
-
-void read_batch_csum_info(int flist_entry, struct sum_struct *s,
-			  int *checksums_match)
-{
-	int i;
-	int file_flist_entry;
-	int file_chunk_ct;
-	uint32 file_sum1;
-	char file_sum2[SUM_LENGTH];
-	char filename[MAXPATHLEN];
-
-	if (f_csums < 0) {
-		stringjoin(filename, sizeof filename,
-		    batch_prefix, rsync_csums_file, NULL);
-
-		f_csums = do_open(filename, O_RDONLY, 0);
-		if (f_csums < 0) {
-			rprintf(FERROR, "Batch file %s open error: %s\n",
-			    filename, strerror(errno));
-			close(f_csums);
-			exit_cleanup(1);
-		}
-	}
-
-	read_batch_csums_file((char *) &file_flist_entry, sizeof (int));
-	if (file_flist_entry != flist_entry) {
-		rprintf(FINFO, "file_flist_entry (%d) != flist_entry (%d)\n",
-		    file_flist_entry, flist_entry);
-		close(f_csums);
-		exit_cleanup(1);
-
-	} else {
-		read_batch_csums_file((char *) &file_chunk_ct, sizeof (int));
-		*checksums_match = 1;
-		for (i = 0; i < file_chunk_ct; i++) {
-			read_batch_csums_file((char *) &file_sum1,
-			    sizeof (uint32));
-			read_batch_csums_file(file_sum2, csum_length);
-
-			if ((s->sums[i].sum1 != file_sum1)
-			    || memcmp(s->sums[i].sum2, file_sum2, csum_length))
-				*checksums_match = 0;
-		}		/*  end for  */
-	}
-}
-
-void write_batch_delta_file(char *buff, int bytes_to_write)
-{
-	char filename[MAXPATHLEN];
-
-	if (f_delta < 0) {
-		stringjoin(filename, sizeof filename,
-		    batch_prefix, rsync_delta_file, NULL);
-
-		f_delta = do_open(filename, O_WRONLY | O_CREAT | O_TRUNC,
-				  S_IRUSR | S_IWUSR);
-		if (f_delta < 0) {
-			rprintf(FERROR, "Batch file %s open error: %s\n",
-				filename, strerror(errno));
-			exit_cleanup(1);
-		}
-	}
-
-	if (write(f_delta, buff, bytes_to_write) < 0) {
-		rprintf(FERROR, "Batch file %s write error: %s\n",
-		    filename, strerror(errno));
-		close(f_delta);
-		exit_cleanup(1);
-	}
-}
-
-void close_batch_delta_file(void)
-{
-	close(f_delta);
-	f_delta = -1;
-}
-
-int read_batch_delta_file(char *buff, int len)
-{
-	int bytes_read;
-	char filename[MAXPATHLEN];
-
-	if (f_delta < 0) {
-		stringjoin(filename, sizeof filename,
-		    batch_prefix, rsync_delta_file, NULL);
-
-		f_delta = do_open(filename, O_RDONLY, 0);
-		if (f_delta < 0) {
-			rprintf(FERROR, "Batch file %s open error: %s\n",
-			    filename, strerror(errno));
-			close(f_delta);
-			exit_cleanup(1);
-		}
-	}
-
-	bytes_read = read(f_delta, buff, len);
-	if (bytes_read < 0) {
-		rprintf(FERROR, "Batch file %s read error: %s\n",
-		    filename, strerror(errno));
-		close(f_delta);
-		exit_cleanup(1);
-	}
-
-	return bytes_read;
 }
 
 void show_flist(int index, struct file_struct **fptr)
@@ -345,25 +210,25 @@ void show_flist(int index, struct file_struct **fptr)
 		rprintf(FINFO, "flist->length=%.0f\n",
 			(double) fptr[i]->length);
 		rprintf(FINFO, "flist->mode=%#o\n", (int) fptr[i]->mode);
-		rprintf(FINFO, "flist->basename=%s\n", fptr[i]->basename);
-		if (fptr[i]->dirname)
+		rprintf(FINFO, "flist->basename=%s\n",
+			safe_fname(fptr[i]->basename));
+		if (fptr[i]->dirname) {
 			rprintf(FINFO, "flist->dirname=%s\n",
-				fptr[i]->dirname);
-		if (fptr[i]->basedir)
-			rprintf(FINFO, "flist->basedir=%s\n",
-				fptr[i]->basedir);
+				safe_fname(fptr[i]->dirname));
+		}
+		if (am_sender && fptr[i]->dir.root) {
+			rprintf(FINFO, "flist->dir.root=%s\n",
+				safe_fname(fptr[i]->dir.root));
+		}
 	}
 }
 
+/* for debugging */
 void show_argvs(int argc, char *argv[])
 {
-	/*  for debugging  * */
-
 	int i;
-	rprintf(FINFO, "BATCH.C:show_argvs,argc=%d\n", argc);
-	for (i = 0; i < argc; i++) {
-		/*    if (argv[i])   */
-		rprintf(FINFO, "i=%d,argv[i]=%s\n", i, argv[i]);
 
-	}
+	rprintf(FINFO, "BATCH.C:show_argvs,argc=%d\n", argc);
+	for (i = 0; i < argc; i++)
+		rprintf(FINFO, "i=%d,argv[i]=%s\n", i, safe_fname(argv[i]));
 }

checksum.c

@@ -1,17 +1,17 @@
-/* 
+/*
    Copyright (C) Andrew Tridgell 1996
    Copyright (C) Paul Mackerras 1996
-   
+
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
-   
+
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-   
+
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
@@ -30,17 +30,17 @@ extern int protocol_version;
   a simple 32 bit checksum that can be upadted from either end
   (inspired by Mark Adler's Adler-32 checksum)
   */
-uint32 get_checksum1(char *buf1,int len)
+uint32 get_checksum1(char *buf1, int32 len)
 {
-    int i;
+    int32 i;
     uint32 s1, s2;
     schar *buf = (schar *)buf1;
 
     s1 = s2 = 0;
     for (i = 0; i < (len-4); i+=4) {
-	s2 += 4*(s1 + buf[i]) + 3*buf[i+1] + 2*buf[i+2] + buf[i+3] + 
+	s2 += 4*(s1 + buf[i]) + 3*buf[i+1] + 2*buf[i+2] + buf[i+3] +
 	  10*CHAR_OFFSET;
-	s1 += (buf[i+0] + buf[i+1] + buf[i+2] + buf[i+3] + 4*CHAR_OFFSET); 
+	s1 += (buf[i+0] + buf[i+1] + buf[i+2] + buf[i+3] + 4*CHAR_OFFSET);
     }
     for (; i < len; i++) {
 	s1 += (buf[i]+CHAR_OFFSET); s2 += s1;
@@ -49,28 +49,30 @@ uint32 get_checksum1(char *buf1,int len)
 }
 
 
-void get_checksum2(char *buf,int len,char *sum)
+void get_checksum2(char *buf, int32 len, char *sum)
 {
-	int i;
+	int32 i;
 	static char *buf1;
-	static int len1;
+	static int32 len1;
 	struct mdfour m;
 
 	if (len > len1) {
-		if (buf1) free(buf1);
+		if (buf1)
+			free(buf1);
 		buf1 = new_array(char, len+4);
 		len1 = len;
-		if (!buf1) out_of_memory("get_checksum2");
+		if (!buf1)
+			out_of_memory("get_checksum2");
 	}
-	
+
 	mdfour_begin(&m);
-	
+
 	memcpy(buf1,buf,len);
 	if (checksum_seed) {
 		SIVAL(buf1,len,checksum_seed);
 		len += 4;
 	}
-	
+
 	for(i = 0; i + CSUM_CHUNK <= len; i += CSUM_CHUNK) {
 		mdfour_update(&m, (uchar *)(buf1+i), CSUM_CHUNK);
 	}
@@ -83,7 +85,7 @@ void get_checksum2(char *buf,int len,char *sum)
 	if (len - i > 0 || protocol_version >= 27) {
 		mdfour_update(&m, (uchar *)(buf1+i), (len-i));
 	}
-	
+
 	mdfour_result(&m, (uchar *)sum);
 }
 
@@ -94,35 +96,29 @@ void file_checksum(char *fname,char *sum,OFF_T size)
 	struct map_struct *buf;
 	int fd;
 	OFF_T len = size;
-	char tmpchunk[CSUM_CHUNK];
 	struct mdfour m;
-	
+
 	memset(sum,0,MD4_SUM_LENGTH);
-	
+
 	fd = do_open(fname, O_RDONLY, 0);
-	if (fd == -1) return;
-	
-	buf = map_file(fd,size);
-	
+	if (fd == -1)
+		return;
+
+	buf = map_file(fd, size, MAX_MAP_SIZE, CSUM_CHUNK);
+
 	mdfour_begin(&m);
 
 	for(i = 0; i + CSUM_CHUNK <= len; i += CSUM_CHUNK) {
-		memcpy(tmpchunk, map_ptr(buf,i,CSUM_CHUNK), CSUM_CHUNK);
-		mdfour_update(&m, (uchar *)tmpchunk, CSUM_CHUNK);
+		mdfour_update(&m, (uchar *)map_ptr(buf, i, CSUM_CHUNK),
+			      CSUM_CHUNK);
 	}
 
-	/*
-	 * Prior to version 27 an incorrect MD4 checksum was computed
+	/* Prior to version 27 an incorrect MD4 checksum was computed
 	 * by failing to call mdfour_tail() for block sizes that
 	 * are multiples of 64.  This is fixed by calling mdfour_update()
-	 * even when there are no more bytes.
-	 */
-	if (len - i > 0) {
-		memcpy(tmpchunk, map_ptr(buf,i,len-i), len-i);
-	}
-	if (len - i > 0 || protocol_version >= 27) {
-		mdfour_update(&m, (uchar *)tmpchunk, (len-i));
-	}
+	 * even when there are no more bytes. */
+	if (len - i > 0 || protocol_version >= 27)
+		mdfour_update(&m, (uchar *)map_ptr(buf, i, len-i), len-i);
 
 	mdfour_result(&m, (uchar *)sum);
 
@@ -131,17 +127,17 @@ void file_checksum(char *fname,char *sum,OFF_T size)
 }
 
 
-static int sumresidue;
+static int32 sumresidue;
 static char sumrbuf[CSUM_CHUNK];
 static struct mdfour md;
 
-void sum_init(void)
+void sum_init(int seed)
 {
 	char s[4];
 	mdfour_begin(&md);
-	sumresidue=0;
-	SIVAL(s,0,checksum_seed);
-	sum_update(s,4);
+	sumresidue = 0;
+	SIVAL(s, 0, seed);
+	sum_update(s, 4);
 }
 
 /**
@@ -152,41 +148,37 @@ void sum_init(void)
  * @todo Perhaps get rid of md and just pass in the address each time.
  * Very slightly clearer and slower.
  **/
-void sum_update(char *p, int len)
+void sum_update(char *p, int32 len)
 {
-	int i;
 	if (len + sumresidue < CSUM_CHUNK) {
-		memcpy(sumrbuf+sumresidue, p, len);
+		memcpy(sumrbuf + sumresidue, p, len);
 		sumresidue += len;
 		return;
 	}
 
 	if (sumresidue) {
-		i = MIN(CSUM_CHUNK-sumresidue,len);
-		memcpy(sumrbuf+sumresidue,p,i);
-		mdfour_update(&md, (uchar *)sumrbuf, (i+sumresidue));
+		int32 i = CSUM_CHUNK - sumresidue;
+		memcpy(sumrbuf + sumresidue, p, i);
+		mdfour_update(&md, (uchar *)sumrbuf, CSUM_CHUNK);
 		len -= i;
 		p += i;
 	}
 
-	for(i = 0; i + CSUM_CHUNK <= len; i += CSUM_CHUNK) {
-		memcpy(sumrbuf,p+i,CSUM_CHUNK);
-		mdfour_update(&md, (uchar *)sumrbuf, CSUM_CHUNK);
+	while (len >= CSUM_CHUNK) {
+		mdfour_update(&md, (uchar *)p, CSUM_CHUNK);
+		len -= CSUM_CHUNK;
+		p += CSUM_CHUNK;
 	}
 
-	if (len - i > 0) {
-		sumresidue = len-i;
-		memcpy(sumrbuf,p+i,sumresidue);
-	} else {
-		sumresidue = 0;    
-	}
+	sumresidue = len;
+	if (sumresidue)
+		memcpy(sumrbuf, p, sumresidue);
 }
 
 void sum_end(char *sum)
 {
-	if (sumresidue || protocol_version >= 27) {
+	if (sumresidue || protocol_version >= 27)
 		mdfour_update(&md, (uchar *)sumrbuf, sumresidue);
-	}
 
 	mdfour_result(&md, (uchar *)sum);
 }

cleanup.c

@@ -1,19 +1,19 @@
 /* -*- c-file-style: "linux" -*-
-   
+
    Copyright (C) 1996-2000 by Andrew Tridgell
    Copyright (C) Paul Mackerras 1996
    Copyright (C) 2002 by Martin Pool
-   
+
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
-   
+
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-   
+
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
@@ -21,6 +21,11 @@
 
 #include "rsync.h"
 
+extern int io_error;
+extern int keep_partial;
+extern int log_got_error;
+extern char *partial_dir;
+
 /**
  * Close all open sockets and files, allowing a (somewhat) graceful
  * shutdown() of socket connections.  This eliminates the abortive
@@ -32,15 +37,13 @@ void close_all(void)
 	int max_fd;
 	int fd;
 	int ret;
-	struct stat st;
+	STRUCT_STAT st;
 
 	max_fd = sysconf(_SC_OPEN_MAX) - 1;
 	for (fd = max_fd; fd >= 0; fd--) {
-		ret = fstat(fd,&st);
-		if (fstat(fd,&st) == 0) {
-			if (is_a_socket(fd)) {
+		if ((ret = do_fstat(fd, &st)) == 0) {
+			if (is_a_socket(fd))
 				ret = shutdown(fd, 2);
-			}
 			ret = close(fd);
 		}
 	}
@@ -65,15 +68,13 @@ void close_all(void)
  * --partial is selected.  We need to ensure that the partial file is
  * kept if any real data has been transferred.
  **/
-int cleanup_got_literal=0;
+int cleanup_got_literal = 0;
 
 static char *cleanup_fname;
 static char *cleanup_new_fname;
 static struct file_struct *cleanup_file;
-static int cleanup_fd1, cleanup_fd2;
-static struct map_struct *cleanup_buf;
+static int cleanup_fd_r, cleanup_fd_w;
 static pid_t cleanup_pid = 0;
-extern int io_error;
 
 pid_t cleanup_child_pid = -1;
 
@@ -85,8 +86,6 @@ pid_t cleanup_child_pid = -1;
 void _exit_cleanup(int code, const char *file, int line)
 {
 	int ocode = code;
-	extern int keep_partial;
-	extern int log_got_error;
 	static int inside_cleanup = 0;
 
 	if (inside_cleanup > 10) {
@@ -98,51 +97,60 @@ void _exit_cleanup(int code, const char *file, int line)
 	signal(SIGUSR1, SIG_IGN);
 	signal(SIGUSR2, SIG_IGN);
 
-	if (verbose > 3)
-		rprintf(FINFO,"_exit_cleanup(code=%d, file=%s, line=%d): entered\n", 
-			code, file, line);
+	if (verbose > 3) {
+		rprintf(FINFO,"_exit_cleanup(code=%d, file=%s, line=%d): entered\n",
+			code, safe_fname(file), line);
+	}
 
 	if (cleanup_child_pid != -1) {
 		int status;
 		if (waitpid(cleanup_child_pid, &status, WNOHANG) == cleanup_child_pid) {
 			status = WEXITSTATUS(status);
-			if (status > code) code = status;
+			if (status > code)
+				code = status;
 		}
 	}
 
-	if (cleanup_got_literal && cleanup_fname && keep_partial) {
+	if (cleanup_got_literal && cleanup_fname && keep_partial
+	    && handle_partial_dir(cleanup_new_fname, PDIR_CREATE)) {
 		char *fname = cleanup_fname;
 		cleanup_fname = NULL;
-		if (cleanup_buf) unmap_file(cleanup_buf);
-		if (cleanup_fd1 != -1) close(cleanup_fd1);
-		if (cleanup_fd2 != -1) close(cleanup_fd2);
-		finish_transfer(cleanup_new_fname, fname, cleanup_file);
+		if (cleanup_fd_r != -1)
+			close(cleanup_fd_r);
+		if (cleanup_fd_w != -1) {
+			flush_write_file(cleanup_fd_w);
+			close(cleanup_fd_w);
+		}
+		finish_transfer(cleanup_new_fname, fname, cleanup_file, 0,
+				!partial_dir);
 	}
 	io_flush(FULL_FLUSH);
 	if (cleanup_fname)
 		do_unlink(cleanup_fname);
-	if (code) {
+	if (code)
 		kill_all(SIGUSR1);
-	}
 	if (cleanup_pid && cleanup_pid == getpid()) {
 		char *pidf = lp_pid_file();
-		if (pidf && *pidf) {
+		if (pidf && *pidf)
 			unlink(lp_pid_file());
-		}
 	}
 
 	if (code == 0) {
-		if ((io_error & ~IOERR_VANISHED) || log_got_error)
-			code = RERR_PARTIAL;
-		else if (io_error)
+		if (io_error & IOERR_DEL_LIMIT)
+			code = RERR_DEL_LIMIT;
+		if (io_error & IOERR_VANISHED)
 			code = RERR_VANISHED;
+		if (io_error & IOERR_GENERAL || log_got_error)
+			code = RERR_PARTIAL;
 	}
 
-	if (code) log_exit(code, file, line);
+	if (code)
+		log_exit(code, file, line);
 
-	if (verbose > 2)
-		rprintf(FINFO,"_exit_cleanup(code=%d, file=%s, line=%d): about to call exit(%d)\n", 
-			ocode, file, line, code);
+	if (verbose > 2) {
+		rprintf(FINFO,"_exit_cleanup(code=%d, file=%s, line=%d): about to call exit(%d)\n",
+			ocode, safe_fname(file), line, code);
+	}
 
 	close_all();
 	exit(code);
@@ -156,14 +164,13 @@ void cleanup_disable(void)
 
 
 void cleanup_set(char *fnametmp, char *fname, struct file_struct *file,
-		 struct map_struct *buf, int fd1, int fd2)
+		 int fd_r, int fd_w)
 {
 	cleanup_fname = fnametmp;
 	cleanup_new_fname = fname;
 	cleanup_file = file;
-	cleanup_buf = buf;
-	cleanup_fd1 = fd1;
-	cleanup_fd2 = fd2;
+	cleanup_fd_r = fd_r;
+	cleanup_fd_w = fd_w;
 }
 
 void cleanup_set_pid(pid_t pid)

clientname.c

@@ -43,12 +43,11 @@ extern int am_server;
  **/
 char *client_addr(int fd)
 {
-	struct sockaddr_storage ss;
-	socklen_t length = sizeof ss;
-	char *ssh_client, *p;
-	int len;
 	static char addr_buf[100];
 	static int initialised;
+	struct sockaddr_storage ss;
+	socklen_t length = sizeof ss;
+	char *ssh_info, *p;
 
 	if (initialised)
 		return addr_buf;
@@ -57,14 +56,13 @@ char *client_addr(int fd)
 
 	if (am_server) {	/* daemon over --rsh mode */
 		strcpy(addr_buf, "0.0.0.0");
-		if ((ssh_client = getenv("SSH_CLIENT")) != NULL) {
-			/* truncate SSH_CLIENT to just IP address */
-			if ((p = strchr(ssh_client, ' ')) != NULL) {
-				len = MIN((unsigned int) (p - ssh_client),
-				    sizeof addr_buf - 1);
-				strncpy(addr_buf, ssh_client, len);
-				*(addr_buf + len) = '\0';
-			}
+		if ((ssh_info = getenv("SSH_CONNECTION")) != NULL
+		    || (ssh_info = getenv("SSH_CLIENT")) != NULL
+		    || (ssh_info = getenv("SSH2_CLIENT")) != NULL) {
+			strlcpy(addr_buf, ssh_info, sizeof addr_buf);
+			/* Truncate the value to just the IP address. */
+			if ((p = strchr(addr_buf, ' ')) != NULL)
+				*p = '\0';
 		}
 	} else {
 		client_sockaddr(fd, &ss, &length);
@@ -124,7 +122,7 @@ char *client_name(int fd)
 		hint.ai_socktype = SOCK_STREAM;
 
 		if ((err = getaddrinfo(addr, NULL, &hint, &answer)) != 0) {
-			rprintf(FERROR, RSYNC_NAME ": malformed address %s: %s\n",
+			rprintf(FLOG, "malformed address %s: %s\n",
 			        addr, gai_strerror(err));
 			return name_buf;
 		}
@@ -147,8 +145,8 @@ char *client_name(int fd)
 		client_sockaddr(fd, &ss, &ss_len);
 	}
 
-	if (!lookup_name(fd, &ss, ss_len, name_buf, sizeof name_buf,
-			port_buf, sizeof port_buf))
+	if (lookup_name(fd, &ss, ss_len, name_buf, sizeof name_buf,
+			port_buf, sizeof port_buf) == 0)
 		check_name(fd, &ss, name_buf);
 
 	return name_buf;
@@ -170,8 +168,7 @@ void client_sockaddr(int fd,
 
 	if (getpeername(fd, (struct sockaddr *) ss, ss_len)) {
 		/* FIXME: Can we really not continue? */
-		rprintf(FERROR, RSYNC_NAME ": getpeername on fd%d failed: %s\n",
-			fd, strerror(errno));
+		rsyserr(FLOG, errno, "getpeername on fd%d failed", fd);
 		exit_cleanup(RERR_SOCKETIO);
 	}
 
@@ -192,7 +189,7 @@ void client_sockaddr(int fd,
 		memset(sin, 0, sizeof *sin);
 		sin->sin_family = AF_INET;
 		*ss_len = sizeof (struct sockaddr_in);
-#if HAVE_SOCKADDR_IN_LEN
+#ifdef HAVE_SOCKADDR_IN_LEN
 		sin->sin_len = *ss_len;
 #endif
 		sin->sin_port = sin6.sin6_port;
@@ -226,9 +223,8 @@ int lookup_name(int fd, const struct sockaddr_storage *ss,
 			       NI_NAMEREQD | NI_NUMERICSERV);
 	if (name_err != 0) {
 		strcpy(name_buf, default_name);
-		rprintf(FERROR, RSYNC_NAME ": name lookup failed for %s: %s\n",
-			client_addr(fd),
-			gai_strerror(name_err));
+		rprintf(FLOG, "name lookup failed for %s: %s\n",
+			client_addr(fd), gai_strerror(name_err));
 		return name_err;
 	}
 
@@ -249,8 +245,7 @@ int compare_addrinfo_sockaddr(const struct addrinfo *ai,
 	const char fn[] = "compare_addrinfo_sockaddr";
 
 	if (ai->ai_family != ss_family) {
-		rprintf(FERROR,
-			"%s: response family %d != %d\n",
+		rprintf(FLOG, "%s: response family %d != %d\n",
 			fn, ai->ai_family, ss_family);
 		return 1;
 	}
@@ -274,8 +269,7 @@ int compare_addrinfo_sockaddr(const struct addrinfo *ai,
 		sin2 = (const struct sockaddr_in6 *) ai->ai_addr;
 
 		if (ai->ai_addrlen < sizeof (struct sockaddr_in6)) {
-			rprintf(FERROR,
-				"%s: too short sockaddr_in6; length=%d\n",
+			rprintf(FLOG, "%s: too short sockaddr_in6; length=%d\n",
 				fn, ai->ai_addrlen);
 			return 1;
 		}
@@ -321,8 +315,7 @@ int check_name(int fd,
 	hints.ai_socktype = SOCK_STREAM;
 	error = getaddrinfo(name_buf, NULL, &hints, &res0);
 	if (error) {
-		rprintf(FERROR,
-			RSYNC_NAME ": forward name lookup for %s failed: %s\n",
+		rprintf(FLOG, "forward name lookup for %s failed: %s\n",
 			name_buf, gai_strerror(error));
 		strcpy(name_buf, default_name);
 		return error;
@@ -339,23 +332,17 @@ int check_name(int fd,
 	if (!res0) {
 		/* We hit the end of the list without finding an
 		 * address that was the same as ss. */
-		rprintf(FERROR, RSYNC_NAME
-			": no known address for \"%s\": "
-			"spoofed address?\n",
-			name_buf);
+		rprintf(FLOG, "no known address for \"%s\": "
+			"spoofed address?\n", name_buf);
 		strcpy(name_buf, default_name);
 	} else if (res == NULL) {
 		/* We hit the end of the list without finding an
 		 * address that was the same as ss. */
-		rprintf(FERROR, RSYNC_NAME
-			": %s is not a known address for \"%s\": "
-			"spoofed address?\n",
-			client_addr(fd),
-			name_buf);
+		rprintf(FLOG, "%s is not a known address for \"%s\": "
+			"spoofed address?\n", client_addr(fd), name_buf);
 		strcpy(name_buf, default_name);
 	}
 
 	freeaddrinfo(res0);
 	return 0;
 }
-

clientserver.c

@@ -27,31 +27,37 @@
 
 #include "rsync.h"
 
+extern int verbose;
+extern int list_only;
 extern int am_sender;
 extern int am_server;
 extern int am_daemon;
 extern int am_root;
-extern int module_id;
-extern int read_only;
-extern int verbose;
 extern int rsync_port;
-extern int kludge_around_eof;
+extern int kluge_around_eof;
 extern int daemon_over_rsh;
-extern int list_only;
 extern int sanitize_paths;
 extern int filesfrom_fd;
 extern int remote_protocol;
 extern int protocol_version;
 extern int io_timeout;
+extern int select_timeout;
 extern int orig_umask;
 extern int no_detach;
 extern int default_af_hint;
 extern char *bind_address;
-extern struct exclude_list_struct server_exclude_list;
-extern char *exclude_path_prefix;
+extern struct filter_list_struct server_filter_list;
 extern char *config_file;
+extern char *files_from;
 
 char *auth_user;
+int read_only = 0;
+int daemon_log_format_has_i = 0;
+int daemon_log_format_has_o_or_i = 0;
+int module_id = -1;
+
+/* Length of lp_path() string when in daemon mode & not chrooted, else 0. */
+unsigned int module_dirlen = 0;
 
 /**
  * Run a client connected to an rsyncd.  The alternative to this
@@ -70,21 +76,21 @@ char *auth_user;
 int start_socket_client(char *host, char *path, int argc, char *argv[])
 {
 	int fd, ret;
-	char *p, *user=NULL;
+	char *p, *user = NULL;
 
-	/* this is redundant with code in start_inband_exchange(), but
-	 * this short-circuits a problem before we open a socket, and
-	 * the extra check won't hurt */
+	/* This is redundant with code in start_inband_exchange(), but this
+	 * short-circuits a problem in the client before we open a socket,
+	 * and the extra check won't hurt. */
 	if (*path == '/') {
-		rprintf(FERROR,"ERROR: The remote path must start with a module name not a /\n");
+		rprintf(FERROR,
+			"ERROR: The remote path must start with a module name not a /\n");
 		return -1;
 	}
 
-	p = strchr(host, '@');
-	if (p) {
+	if ((p = strrchr(host, '@')) != NULL) {
 		user = host;
 		host = p+1;
-		*p = 0;
+		*p = '\0';
 	}
 
 	fd = open_socket_out_wrapped(host, rsync_port, bind_address,
@@ -97,7 +103,8 @@ int start_socket_client(char *host, char *path, int argc, char *argv[])
 	return ret < 0? ret : client_run(fd, fd, -1, argc, argv);
 }
 
-int start_inband_exchange(char *user, char *path, int f_in, int f_out, int argc)
+int start_inband_exchange(char *user, char *path, int f_in, int f_out, 
+			  int argc)
 {
 	int i;
 	char *sargs[MAX_ARGS];
@@ -106,15 +113,37 @@ int start_inband_exchange(char *user, char *path, int f_in, int f_out, int argc)
 	char *p;
 
 	if (argc == 0 && !am_sender)
-		list_only = 1;
+		list_only |= 1;
 
 	if (*path == '/') {
-		rprintf(FERROR, "ERROR: The remote path must start with a module name\n");
+		rprintf(FERROR,
+			"ERROR: The remote path must start with a module name\n");
 		return -1;
 	}
 
-	if (!user) user = getenv("USER");
-	if (!user) user = getenv("LOGNAME");
+	if (!user)
+		user = getenv("USER");
+	if (!user)
+		user = getenv("LOGNAME");
+
+	io_printf(f_out, "@RSYNCD: %d\n", protocol_version);
+
+	if (!read_line(f_in, line, sizeof line - 1)) {
+		rprintf(FERROR, "rsync: did not see server greeting\n");
+		return -1;
+	}
+
+	if (sscanf(line,"@RSYNCD: %d", &remote_protocol) != 1) {
+		/* note that read_line strips of \n or \r */
+		rprintf(FERROR, "rsync: server sent \"%s\" rather than greeting\n",
+			line);
+		return -1;
+	}
+	if (protocol_version > remote_protocol)
+		protocol_version = remote_protocol;
+
+	if (list_only && protocol_version >= 29)
+		list_only |= 2;
 
 	/* set daemon_over_rsh to false since we need to build the
 	 * true set of args passed through the rsh/ssh connection;
@@ -129,21 +158,8 @@ int start_inband_exchange(char *user, char *path, int f_in, int f_out, int argc)
 
 	sargs[sargc] = NULL;
 
-	io_printf(f_out, "@RSYNCD: %d\n", protocol_version);
-
-	if (!read_line(f_in, line, sizeof(line)-1)) {
-		rprintf(FERROR, "rsync: did not see server greeting\n");
-		return -1;
-	}
-
-	if (sscanf(line,"@RSYNCD: %d", &remote_protocol) != 1) {
-		/* note that read_line strips of \n or \r */
-		rprintf(FERROR, "rsync: server sent \"%s\" rather than greeting\n",
-			line);
-		return -1;
-	}
-	if (protocol_version > remote_protocol)
-		protocol_version = remote_protocol;
+	if (verbose > 1)
+		print_child_argv(sargs);
 
 	p = strchr(path,'/');
 	if (p) *p = 0;
@@ -152,10 +168,10 @@ int start_inband_exchange(char *user, char *path, int f_in, int f_out, int argc)
 
 	/* Old servers may just drop the connection here,
 	 rather than sending a proper EXIT command.  Yuck. */
-	kludge_around_eof = list_only && (protocol_version < 25);
+	kluge_around_eof = list_only && protocol_version < 25 ? 1 : 0;
 
 	while (1) {
-		if (!read_line(f_in, line, sizeof(line)-1)) {
+		if (!read_line(f_in, line, sizeof line - 1)) {
 			rprintf(FERROR, "rsync: didn't get server startup line\n");
 			return -1;
 		}
@@ -165,7 +181,8 @@ int start_inband_exchange(char *user, char *path, int f_in, int f_out, int argc)
 			continue;
 		}
 
-		if (strcmp(line,"@RSYNCD: OK") == 0) break;
+		if (strcmp(line,"@RSYNCD: OK") == 0)
+			break;
 
 		if (strcmp(line,"@RSYNCD: EXIT") == 0) {
 			/* This is sent by recent versions of the
@@ -176,7 +193,7 @@ int start_inband_exchange(char *user, char *path, int f_in, int f_out, int argc)
 		}
 
 		if (strncmp(line, "@ERROR", 6) == 0) {
-			rprintf(FERROR,"%s\n", line);
+			rprintf(FERROR, "%s\n", line);
 			/* This is always fatal; the server will now
 			 * close the socket. */
 			return RERR_STARTCLIENT;
@@ -184,7 +201,7 @@ int start_inband_exchange(char *user, char *path, int f_in, int f_out, int argc)
 			rprintf(FINFO,"%s\n", line);
 		}
 	}
-	kludge_around_eof = False;
+	kluge_around_eof = 0;
 
 	for (i = 0; i < sargc; i++) {
 		io_printf(f_out, "%s\n", sargs[i]);
@@ -193,7 +210,7 @@ int start_inband_exchange(char *user, char *path, int f_in, int f_out, int argc)
 
 	if (protocol_version < 23) {
 		if (protocol_version == 22 || !am_sender)
-			io_start_multiplex_in(f_in);
+			io_start_multiplex_in();
 	}
 
 	return 0;
@@ -203,8 +220,9 @@ int start_inband_exchange(char *user, char *path, int f_in, int f_out, int argc)
 
 static int rsync_module(int f_in, int f_out, int i)
 {
-	int argc=0;
-	char *argv[MAX_ARGS];
+	int argc = 0;
+	int maxargs;
+	char **argv;
 	char **argp;
 	char line[MAXPATHLEN];
 	uid_t uid = (uid_t)-2;  /* canonically "nobody" */
@@ -214,43 +232,46 @@ static int rsync_module(int f_in, int f_out, int i)
 	char *host = client_name(f_in);
 	char *name = lp_name(i);
 	int use_chroot = lp_use_chroot(i);
-	int start_glob=0;
+	int start_glob = 0;
 	int ret;
-	char *request=NULL;
+	char *request = NULL;
 
 	if (!allow_access(addr, host, lp_hosts_allow(i), lp_hosts_deny(i))) {
-		rprintf(FERROR,"rsync denied on module %s from %s (%s)\n",
+		rprintf(FLOG, "rsync denied on module %s from %s (%s)\n",
 			name, host, addr);
-		io_printf(f_out, "@ERROR: access denied to %s from %s (%s)\n",
-			  name, host, addr);
+		if (!lp_list(i))
+			io_printf(f_out, "@ERROR: Unknown module '%s'\n", name);
+		else {
+			io_printf(f_out,
+				  "@ERROR: access denied to %s from %s (%s)\n",
+				  name, host, addr);
+		}
 		return -1;
 	}
 
 	if (am_daemon && am_server) {
-		rprintf(FINFO, "rsync allowed access on module %s from %s (%s)\n",
+		rprintf(FLOG, "rsync allowed access on module %s from %s (%s)\n",
 			name, host, addr);
 	}
 
 	if (!claim_connection(lp_lock_file(i), lp_max_connections(i))) {
 		if (errno) {
-			rprintf(FERROR,"failed to open lock file %s : %s\n",
-				lp_lock_file(i), strerror(errno));
-			io_printf(f_out, "@ERROR: failed to open lock file %s : %s\n",
-				  lp_lock_file(i), strerror(errno));
+			rsyserr(FLOG, errno, "failed to open lock file %s",
+				safe_fname(lp_lock_file(i)));
+			io_printf(f_out, "@ERROR: failed to open lock file\n");
 		} else {
-			rprintf(FERROR,"max connections (%d) reached\n",
+			rprintf(FLOG, "max connections (%d) reached\n",
 				lp_max_connections(i));
-			io_printf(f_out, "@ERROR: max connections (%d) reached - try again later\n",
+			io_printf(f_out, "@ERROR: max connections (%d) reached -- try again later\n",
 				lp_max_connections(i));
 		}
 		return -1;
 	}
 
-
 	auth_user = auth_server(f_in, f_out, i, addr, "@RSYNCD: AUTHREQD ");
 
 	if (!auth_user) {
-		rprintf(FERROR,"auth failed on module %s from %s (%s)\n",
+		rprintf(FLOG, "auth failed on module %s from %s (%s)\n",
 			name, host, addr);
 		io_printf(f_out, "@ERROR: auth failed on module %s\n", name);
 		return -1;
@@ -258,13 +279,24 @@ static int rsync_module(int f_in, int f_out, int i)
 
 	module_id = i;
 
+	if (lp_read_only(i))
+		read_only = 1;
+
+	if (lp_transfer_logging(i)) {
+		if (log_format_has(lp_log_format(i), 'i'))
+			daemon_log_format_has_i = 1;
+		if (daemon_log_format_has_i
+		    || log_format_has(lp_log_format(i), 'o'))
+			daemon_log_format_has_o_or_i = 1;
+	}
+
 	am_root = (MY_UID() == 0);
 
 	if (am_root) {
 		p = lp_uid(i);
 		if (!name_to_uid(p, &uid)) {
-			if (!isdigit(* (unsigned char *) p)) {
-				rprintf(FERROR,"Invalid uid %s\n", p);
+			if (!isdigit(*(unsigned char *)p)) {
+				rprintf(FLOG, "Invalid uid %s\n", p);
 				io_printf(f_out, "@ERROR: invalid uid %s\n", p);
 				return -1;
 			}
@@ -273,8 +305,8 @@ static int rsync_module(int f_in, int f_out, int i)
 
 		p = lp_gid(i);
 		if (!name_to_gid(p, &gid)) {
-			if (!isdigit(* (unsigned char *) p)) {
-				rprintf(FERROR,"Invalid gid %s\n", p);
+			if (!isdigit(*(unsigned char *)p)) {
+				rprintf(FLOG, "Invalid gid %s\n", p);
 				io_printf(f_out, "@ERROR: invalid gid %s\n", p);
 				return -1;
 			}
@@ -289,26 +321,34 @@ static int rsync_module(int f_in, int f_out, int i)
 	/* TODO: Perhaps take a list of gids, and make them into the
 	 * supplementary groups. */
 
-	exclude_path_prefix = use_chroot? "" : lp_path(i);
-	if (*exclude_path_prefix == '/' && !exclude_path_prefix[1])
-		exclude_path_prefix = "";
+	if (use_chroot) {
+		module_dirlen = 0;
+		set_filter_dir("/", 1);
+	} else {
+		module_dirlen = strlen(lp_path(i));
+		set_filter_dir(lp_path(i), module_dirlen);
+	}
+
+	p = lp_filter(i);
+	parse_rule(&server_filter_list, p, MATCHFLG_WORD_SPLIT,
+		   XFLG_ANCHORED2ABS);
 
 	p = lp_include_from(i);
-	add_exclude_file(&server_exclude_list, p,
-			 XFLG_FATAL_ERRORS | XFLG_DEF_INCLUDE);
+	parse_filter_file(&server_filter_list, p, MATCHFLG_INCLUDE,
+	    XFLG_ANCHORED2ABS | XFLG_OLD_PREFIXES | XFLG_FATAL_ERRORS);
 
 	p = lp_include(i);
-	add_exclude(&server_exclude_list, p,
-		    XFLG_WORD_SPLIT | XFLG_DEF_INCLUDE);
+	parse_rule(&server_filter_list, p,
+		   MATCHFLG_INCLUDE | MATCHFLG_WORD_SPLIT,
+		   XFLG_ANCHORED2ABS | XFLG_OLD_PREFIXES);
 
 	p = lp_exclude_from(i);
-	add_exclude_file(&server_exclude_list, p,
-			 XFLG_FATAL_ERRORS);
+	parse_filter_file(&server_filter_list, p, 0,
+	    XFLG_ANCHORED2ABS | XFLG_OLD_PREFIXES | XFLG_FATAL_ERRORS);
 
 	p = lp_exclude(i);
-	add_exclude(&server_exclude_list, p, XFLG_WORD_SPLIT);
-
-	exclude_path_prefix = NULL;
+	parse_rule(&server_filter_list, p, MATCHFLG_WORD_SPLIT,
+		   XFLG_ANCHORED2ABS | XFLG_OLD_PREFIXES);
 
 	log_init();
 
@@ -326,20 +366,23 @@ static int rsync_module(int f_in, int f_out, int i)
 		 * in which case we fail.
 		 */
 		if (chroot(lp_path(i))) {
-			rsyserr(FERROR, errno, "chroot %s failed", lp_path(i));
+			rsyserr(FLOG, errno, "chroot %s failed",
+				safe_fname(lp_path(i)));
 			io_printf(f_out, "@ERROR: chroot failed\n");
 			return -1;
 		}
 
 		if (!push_dir("/")) {
-			rsyserr(FERROR, errno, "chdir %s failed\n", lp_path(i));
+			rsyserr(FLOG, errno, "chdir %s failed\n",
+				safe_fname(lp_path(i)));
 			io_printf(f_out, "@ERROR: chdir failed\n");
 			return -1;
 		}
 
 	} else {
 		if (!push_dir(lp_path(i))) {
-			rsyserr(FERROR, errno, "chdir %s failed\n", lp_path(i));
+			rsyserr(FLOG, errno, "chdir %s failed\n",
+				safe_fname(lp_path(i)));
 			io_printf(f_out, "@ERROR: chdir failed\n");
 			return -1;
 		}
@@ -358,7 +401,7 @@ static int rsync_module(int f_in, int f_out, int i)
 		 * all their supplementary groups. */
 
 		if (setgid(gid)) {
-			rsyserr(FERROR, errno, "setgid %d failed", (int) gid);
+			rsyserr(FLOG, errno, "setgid %d failed", (int)gid);
 			io_printf(f_out, "@ERROR: setgid failed\n");
 			return -1;
 		}
@@ -366,14 +409,14 @@ static int rsync_module(int f_in, int f_out, int i)
 		/* Get rid of any supplementary groups this process
 		 * might have inheristed. */
 		if (setgroups(1, &gid)) {
-			rsyserr(FERROR, errno, "setgroups failed");
+			rsyserr(FLOG, errno, "setgroups failed");
 			io_printf(f_out, "@ERROR: setgroups failed\n");
 			return -1;
 		}
 #endif
 
 		if (setuid(uid)) {
-			rsyserr(FERROR, errno, "setuid %d failed", (int) uid);
+			rsyserr(FLOG, errno, "setuid %d failed", (int)uid);
 			io_printf(f_out, "@ERROR: setuid failed\n");
 			return -1;
 		}
@@ -383,41 +426,42 @@ static int rsync_module(int f_in, int f_out, int i)
 
 	io_printf(f_out, "@RSYNCD: OK\n");
 
+	maxargs = MAX_ARGS;
+	if (!(argv = new_array(char *, maxargs)))
+		out_of_memory("rsync_module");
 	argv[argc++] = "rsyncd";
 
 	while (1) {
-		if (!read_line(f_in, line, sizeof(line)-1)) {
+		if (!read_line(f_in, line, sizeof line - 1))
 			return -1;
-		}
 
-		if (!*line) break;
+		if (!*line)
+			break;
 
 		p = line;
 
-		argv[argc] = strdup(p);
-		if (!argv[argc]) {
-			return -1;
+		if (argc == maxargs) {
+			maxargs += MAX_ARGS;
+			if (!(argv = realloc_array(argv, char *, maxargs)))
+				out_of_memory("rsync_module");
 		}
+		if (!(argv[argc] = strdup(p)))
+			out_of_memory("rsync_module");
 
 		if (start_glob) {
 			if (start_glob == 1) {
 				request = strdup(p);
 				start_glob++;
 			}
-			glob_expand(name, argv, &argc, MAX_ARGS);
-		} else {
+			glob_expand(name, &argv, &argc, &maxargs);
+		} else
 			argc++;
-		}
 
-		if (strcmp(line,".") == 0) {
+		if (strcmp(line, ".") == 0)
 			start_glob = 1;
-		}
-
-		if (argc == MAX_ARGS) {
-			return -1;
-		}
 	}
 
+	verbose = 0; /* future verbosity is controlled by client options */
 	argp = argv;
 	ret = parse_arguments(&argc, (const char ***) &argp, 0);
 
@@ -426,12 +470,12 @@ static int rsync_module(int f_in, int f_out, int i)
 
 	if (request) {
 		if (*auth_user) {
-			rprintf(FINFO,"rsync %s %s from %s@%s (%s)\n",
-				am_sender?"on":"to",
+			rprintf(FLOG, "rsync %s %s from %s@%s (%s)\n",
+				am_sender ? "on" : "to",
 				request, auth_user, host, addr);
 		} else {
-			rprintf(FINFO,"rsync %s %s from %s (%s)\n",
-				am_sender?"on":"to",
+			rprintf(FLOG, "rsync %s %s from %s (%s)\n",
+				am_sender ? "on" : "to",
 				request, host, addr);
 		}
 		free(request);
@@ -443,26 +487,45 @@ static int rsync_module(int f_in, int f_out, int i)
 		verbose = lp_max_verbosity();
 #endif
 
-	if (protocol_version < 23) {
-		if (protocol_version == 22 || am_sender)
-			io_start_multiplex_out(f_out);
+	if (protocol_version < 23
+	    && (protocol_version == 22 || am_sender))
+		io_start_multiplex_out();
+	else if (!ret) {
+		/* We have to get I/O multiplexing started so that we can
+		 * get the error back to the client.  This means getting
+		 * the protocol setup finished first in later versions. */
+		setup_protocol(f_out, f_in);
+		if (!am_sender) {
+			/* Since we failed in our option parsing, we may not
+			 * have finished parsing that the client sent us a
+			 * --files-from option, so look for it manually.
+			 * Without this, the socket would be in the wrong
+			 * state for the upcoming error message. */
+			if (!files_from) {
+				int i;
+				for (i = 0; i < argc; i++) {
+					if (strncmp(argv[i], "--files-from", 12) == 0) {
+						files_from = "";
+						break;
+					}
+				}
+			}
+			if (files_from)
+				write_byte(f_out, 0);
+		}
+		io_start_multiplex_out();
 	}
 
-	/* For later protocol versions, we don't start multiplexing
-	 * until we've configured nonblocking in start_server.  That
-	 * means we're in a sticky situation now: there's no way to
-	 * convey errors to the client. */
-
-	/* FIXME: Hold off on reporting option processing errors until
-	 * we've set up nonblocking and multiplexed IO and can get the
-	 * message back to them. */
 	if (!ret) {
 		option_error();
+		msleep(400);
 		exit_cleanup(RERR_UNSUPPORTED);
 	}
 
 	if (lp_timeout(i)) {
 		io_timeout = lp_timeout(i);
+		if (io_timeout < select_timeout)
+			select_timeout = io_timeout;
 	}
 
 	start_server(f_in, f_out, argc, argp);
@@ -477,9 +540,10 @@ static void send_listing(int fd)
 	int n = lp_numservices();
 	int i;
 
-	for (i=0;i<n;i++)
+	for (i = 0; i < n; i++) {
 		if (lp_list(i))
 			io_printf(fd, "%-15s\t%s\n", lp_name(i), lp_comment(i));
+	}
 
 	if (protocol_version >= 25)
 		io_printf(fd,"@RSYNCD: EXIT\n");
@@ -492,11 +556,12 @@ int start_daemon(int f_in, int f_out)
 {
 	char line[200];
 	char *motd;
-	int i = -1;
+	int i;
 
-	if (!lp_load(config_file, 0)) {
+	io_set_sock_fds(f_in, f_out);
+
+	if (!lp_load(config_file, 0))
 		exit_cleanup(RERR_SYNTAX);
-	}
 
 	log_init();
 
@@ -512,19 +577,19 @@ int start_daemon(int f_in, int f_out)
 	if (motd && *motd) {
 		FILE *f = fopen(motd,"r");
 		while (f && !feof(f)) {
-			int len = fread(line, 1, sizeof(line)-1, f);
+			int len = fread(line, 1, sizeof line - 1, f);
 			if (len > 0) {
 				line[len] = 0;
 				io_printf(f_out, "%s", line);
 			}
 		}
-		if (f) fclose(f);
+		if (f)
+			fclose(f);
 		io_printf(f_out, "\n");
 	}
 
-	if (!read_line(f_in, line, sizeof(line)-1)) {
+	if (!read_line(f_in, line, sizeof line - 1))
 		return -1;
-	}
 
 	if (sscanf(line,"@RSYNCD: %d", &remote_protocol) != 1) {
 		io_printf(f_out, "@ERROR: protocol startup error\n");
@@ -533,28 +598,28 @@ int start_daemon(int f_in, int f_out)
 	if (protocol_version > remote_protocol)
 		protocol_version = remote_protocol;
 
-	while (i == -1) {
-		line[0] = 0;
-		if (!read_line(f_in, line, sizeof(line)-1)) {
-			return -1;
-		}
+	line[0] = 0;
+	if (!read_line(f_in, line, sizeof line - 1))
+		return -1;
 
-		if (!*line || strcmp(line,"#list")==0) {
-			send_listing(f_out);
-			return -1;
-		}
+	if (!*line || strcmp(line, "#list") == 0) {
+		send_listing(f_out);
+		return -1;
+	}
 
-		if (*line == '#') {
-			/* it's some sort of command that I don't understand */
-			io_printf(f_out, "@ERROR: Unknown command '%s'\n", line);
-			return -1;
-		}
+	if (*line == '#') {
+		/* it's some sort of command that I don't understand */
+		io_printf(f_out, "@ERROR: Unknown command '%s'\n", line);
+		return -1;
+	}
 
-		i = lp_number(line);
-		if (i == -1) {
-			io_printf(f_out, "@ERROR: Unknown module '%s'\n", line);
-			return -1;
-		}
+	if ((i = lp_number(line)) < 0) {
+		char *addr = client_addr(f_in);
+		char *host = client_name(f_in);
+		rprintf(FLOG, "unknown module '%s' tried from %s (%s)\n",
+			line, host, addr);
+		io_printf(f_out, "@ERROR: Unknown module '%s'\n", line);
+		return -1;
 	}
 
 	return rsync_module(f_in, f_out, i);
@@ -571,7 +636,7 @@ int daemon_main(void)
 		/* we are running via inetd - close off stdout and
 		 * stderr so that library functions (and getopt) don't
 		 * try to use them. Redirect them to /dev/null */
-		for (i=1;i<3;i++) {
+		for (i = 1; i < 3; i++) {
 			close(i);
 			open("/dev/null", O_RDWR);
 		}
@@ -582,13 +647,17 @@ int daemon_main(void)
 	if (!no_detach)
 		become_daemon();
 
-	if (!lp_load(config_file, 1)) {
+	if (!lp_load(config_file, 1))
 		exit_cleanup(RERR_SYNTAX);
-	}
+
+	if (rsync_port == 0 && (rsync_port = lp_rsync_port()) == 0)
+		rsync_port = RSYNC_PORT;
+	if (bind_address == NULL && *lp_bind_address())
+		bind_address = lp_bind_address();
 
 	log_init();
 
-	rprintf(FINFO, "rsyncd version %s starting, listening on port %d\n",
+	rprintf(FLOG, "rsyncd version %s starting, listening on port %d\n",
 		RSYNC_VERSION, rsync_port);
 	/* TODO: If listening on a particular address, then show that
 	 * address too.  In fact, why not just do inet_ntop on the
@@ -602,7 +671,8 @@ int daemon_main(void)
 		if ((fd = do_open(lp_pid_file(), O_WRONLY|O_CREAT|O_TRUNC,
 					0666 & ~orig_umask)) == -1) {
 			cleanup_set_pid(0);
-			rsyserr(FLOG, errno, "failed to create pid file %s", pid_file);
+			rsyserr(FLOG, errno, "failed to create pid file %s",
+				safe_fname(pid_file));
 			exit_cleanup(RERR_FILEIO);
 		}
 		snprintf(pidbuf, sizeof pidbuf, "%ld\n", (long)pid);

compat.c

@@ -27,36 +27,31 @@
 
 int remote_protocol = 0;
 
-extern int am_server;
-
-extern int preserve_links;
-extern int preserve_perms;
-extern int preserve_devices;
-extern int preserve_uid;
-extern int preserve_gid;
-extern int preserve_times;
-extern int always_checksum;
-extern int checksum_seed;
-
-extern int protocol_version;
 extern int verbose;
-
+extern int am_server;
+extern int am_sender;
+extern int inplace;
+extern int fuzzy_basis;
 extern int read_batch;
-extern int write_batch;
+extern int checksum_seed;
+extern int basis_dir_cnt;
+extern int protocol_version;
+extern char *dest_option;
 
 void setup_protocol(int f_out,int f_in)
 {
 	if (remote_protocol == 0) {
-		if (am_server) {
-			remote_protocol = read_int(f_in);
+		if (!read_batch)
 			write_int(f_out, protocol_version);
-		} else {
-			write_int(f_out, protocol_version);
-			remote_protocol = read_int(f_in);
-		}
+		remote_protocol = read_int(f_in);
 		if (protocol_version > remote_protocol)
 			protocol_version = remote_protocol;
 	}
+	if (read_batch && remote_protocol > protocol_version) {
+	        rprintf(FERROR, "The protocol version in the batch file is too new (%d > %d).\n",
+			remote_protocol, protocol_version);
+		exit_cleanup(RERR_PROTOCOL);
+	}
 
 	if (verbose > 3) {
 		rprintf(FINFO, "(%s) Protocol versions: remote=%d, negotiated=%d\n",
@@ -64,7 +59,7 @@ void setup_protocol(int f_out,int f_in)
 	}
 	if (remote_protocol < MIN_PROTOCOL_VERSION
 	 || remote_protocol > MAX_PROTOCOL_VERSION) {
-		rprintf(FERROR,"protocol version mismatch - is your shell clean?\n");
+		rprintf(FERROR,"protocol version mismatch -- is your shell clean?\n");
 		rprintf(FERROR,"(see the rsync man page for an explanation)\n");
 		exit_cleanup(RERR_PROTOCOL);
 	}
@@ -83,6 +78,27 @@ void setup_protocol(int f_out,int f_in)
 		exit_cleanup(RERR_PROTOCOL);
 	}
 
+	if (fuzzy_basis && protocol_version < 29) {
+		rprintf(FERROR,
+			"--fuzzy requires protocol 29 or higher (negotiated %d).\n",
+			protocol_version);
+		exit_cleanup(RERR_PROTOCOL);
+	}
+
+	if (basis_dir_cnt && inplace && protocol_version < 29) {
+		rprintf(FERROR,
+			"%s with --inplace requires protocol 29 or higher (negotiated %d).\n",
+			dest_option, protocol_version);
+		exit_cleanup(RERR_PROTOCOL);
+	}
+
+	if (basis_dir_cnt > 1 && protocol_version < 29) {
+		rprintf(FERROR,
+			"Multiple %s options requires protocol 29 or higher (negotiated %d).\n",
+			dest_option, protocol_version);
+		exit_cleanup(RERR_PROTOCOL);
+	}
+
 	if (am_server) {
 		if (!checksum_seed)
 			checksum_seed = time(NULL);

configure.in

@@ -3,9 +3,9 @@ dnl Process this file with autoconf to produce a configure script.
 AC_INIT()
 AC_CONFIG_SRCDIR([byteorder.h])
 AC_CONFIG_HEADER(config.h)
-AC_PREREQ(2.52)
+AC_PREREQ(2.59)
 
-RSYNC_VERSION=2.6.2
+RSYNC_VERSION=2.6.4
 AC_SUBST(RSYNC_VERSION)
 AC_MSG_NOTICE([Configuring rsync $RSYNC_VERSION])
 
@@ -57,7 +57,7 @@ fi
 
 
 AC_ARG_ENABLE(profile,
-	AC_HELP_STRING([--enable-profile],	
+	AC_HELP_STRING([--enable-profile],
 		[turn on CPU profiling (default no)],
 		[], []))
 if test x"$enable_profile" = xyes
@@ -68,7 +68,7 @@ fi
 
 # Specifically, this turns on panic_action handling.
 AC_ARG_ENABLE(maintainer-mode,
-	AC_HELP_STRING([--enable-maintainer-mode],	
+	AC_HELP_STRING([--enable-maintainer-mode],
 		[turn on extra debug features],
 		[], []))
 if test x"$enable_maintainer_mode" = xyes
@@ -82,7 +82,7 @@ fi
 CFLAGS="$CFLAGS -DHAVE_CONFIG_H"
 
 # If GCC, turn on warnings.
-if test "x$GCC" = "xyes"
+if test x"$GCC" = x"yes"
 then
 	CFLAGS="$CFLAGS -Wall -W"
 fi
@@ -275,7 +275,7 @@ AC_MSG_CHECKING([whether to call shutdown on all sockets])
 case $host_os in
 	*cygwin* ) AC_MSG_RESULT(yes)
                    AC_DEFINE(SHUTDOWN_ALL_SOCKETS, 1,
-			    [Define if sockets need to be shutdown])
+			    [Define to 1 if sockets need to be shutdown])
 		   ;;
 	       * ) AC_MSG_RESULT(no);;
 esac
@@ -293,9 +293,13 @@ AC_HEADER_MAJOR
 
 AC_CHECK_SIZEOF(int)
 AC_CHECK_SIZEOF(long)
+AC_CHECK_SIZEOF(long long)
 AC_CHECK_SIZEOF(short)
+AC_CHECK_SIZEOF(off_t)
+AC_CHECK_SIZEOF(off64_t)
 
 AC_C_INLINE
+AC_C_LONG_DOUBLE
 
 AC_TYPE_SIGNAL
 AC_TYPE_UID_T
@@ -306,14 +310,13 @@ AC_TYPE_PID_T
 AC_TYPE_GETGROUPS
 AC_CHECK_MEMBERS([struct stat.st_rdev])
 
-AC_CHECK_TYPE([ino_t], [unsigned])
 TYPE_SOCKLEN_T
 
 AC_CACHE_CHECK([for errno in errno.h],rsync_cv_errno, [
     AC_TRY_COMPILE([#include <errno.h>],[int i = errno],
 	rsync_cv_errno=yes,rsync_cv_have_errno_decl=no)])
 if test x"$rsync_cv_errno" = x"yes"; then
-   AC_DEFINE(HAVE_ERRNO_DECL, 1, [ ])
+   AC_DEFINE(HAVE_ERRNO_DECL, 1, [Define to 1 if errno is declared in errno.h])
 fi
 
 # The following test taken from the cvs sources
@@ -348,7 +351,7 @@ if test x"$ac_cv_func_connect" = x"no"; then
        test x"$ac_cv_lib_inet_connect" = x"yes"; then
         # ac_cv_func_connect=yes
         # don't!  it would cause AC_CHECK_FUNC to succeed next time configure is run
-        AC_DEFINE(HAVE_CONNECT, 1, [ ])
+        AC_DEFINE(HAVE_CONNECT, 1, [Define to 1 if you have the "connect" function])
     fi
 fi
 
@@ -383,7 +386,7 @@ if test x"$rsync_cv_HAVE_GETADDR_DEFINES" = x"yes"; then
 		#include <netdb.h>],[getaddrinfo(NULL, NULL, NULL, NULL);],
 			[AC_MSG_RESULT([yes])
 			AC_DEFINE(HAVE_GETADDRINFO, 1,
-				[Define if you have the `getaddrinfo' function.])],
+				[Define to 1 if you have the "getaddrinfo" function.])],
 			[AC_MSG_RESULT([no])
 			AC_LIBOBJ(lib/getaddrinfo)])])
 	AC_CHECK_FUNCS(getnameinfo, , [AC_LIBOBJ(lib/getnameinfo)])
@@ -409,13 +412,22 @@ AC_CHECK_MEMBER([struct sockaddr_in.sin_len],
 #include <netinet/in.h>
 ])
 
+AC_CHECK_MEMBER([struct sockaddr_un.sun_len],
+		[ AC_DEFINE(HAVE_SOCKADDR_UN_LEN, 1, [Do we have sockaddr_un.sun_len?]) ],
+		[],
+		[
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+])
+
 AC_MSG_CHECKING(struct sockaddr_storage)
 AC_TRY_COMPILE([#include <sys/types.h>
 #include <sys/socket.h>],
 [struct sockaddr_storage x;],
 	AC_MSG_RESULT(yes)
 	AC_DEFINE(HAVE_SOCKADDR_STORAGE, 1,
-		[Define if you have strct sockaddr_storage.] ),
+		[Define to 1 if you have struct sockaddr_storage.] ),
 	AC_MSG_RESULT(no))
 
 AC_CHECK_MEMBER([struct sockaddr_in6.sin6_scope_id],
@@ -427,6 +439,27 @@ AC_CHECK_MEMBER([struct sockaddr_in6.sin6_scope_id],
 #include <netinet/in.h>
 ])
 
+AC_MSG_CHECKING(struct stat64)
+AC_TRY_COMPILE([#include <stdio.h>
+#if HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#if HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#if STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# if HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+],[struct stat64 st;],
+    AC_MSG_RESULT(yes)
+	AC_DEFINE(HAVE_STRUCT_STAT64,1,[Define to 1 if you have struct stat64.]),
+    AC_MSG_RESULT(no))
+
 # if we can't find strcasecmp, look in -lresolv (for Unixware at least)
 #
 AC_CHECK_FUNCS(strcasecmp)
@@ -442,9 +475,35 @@ dnl AC_FUNC_MEMCMP
 AC_FUNC_UTIME_NULL
 AC_FUNC_ALLOCA
 AC_CHECK_FUNCS(waitpid wait4 getcwd strdup strerror chown chmod mknod mkfifo \
-    fchmod fstat strchr readlink link utime utimes strftime mtrace \
-    memmove lchown vsnprintf snprintf asprintf setsid glob strpbrk \
-    strlcat strlcpy strtol mallinfo getgroups setgroups geteuid getegid)
+    fchmod fstat strchr readlink link utime utimes strftime mtrace ftruncate \
+    memmove lchown vsnprintf snprintf vasprintf asprintf setsid glob strpbrk \
+    strlcat strlcpy strtol mallinfo getgroups setgroups geteuid getegid \
+    setmode open64 mkstemp64 va_copy __va_copy)
+
+AC_CHECK_FUNCS(getpgrp tcgetpgrp)
+if test $ac_cv_func_getpgrp = yes; then
+    AC_FUNC_GETPGRP
+fi
+
+# Determine whether chown follows symlinks (it should).
+AC_CACHE_CHECK([whether chown() dereferences symlinks],rsync_cv_chown_follows_symlink,[
+  AC_TRY_RUN([
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+#include <stdlib.h>
+#include <errno.h>
+    main() {
+	char const *dangling_symlink = "conftest.dangle";
+	unlink(dangling_symlink);
+	if (symlink("conftest.no-such", dangling_symlink) < 0) abort();
+	if (chown(dangling_symlink, getuid(), getgid()) < 0 && errno == ENOENT) exit(0);
+	exit(1);
+    }],
+  rsync_cv_chown_follows_symlink=yes,rsync_cv_chown_follows_symlink=no,rsync_cv_chown_follows_symlink=yes)])
+if test $rsync_cv_chown_follows_symlink = no; then
+  AC_DEFINE(CHOWN_MODIFIES_SYMLINK, 1, [Define to 1 if chown modifies symlinks.])
+fi
 
 AC_CACHE_CHECK([for working socketpair],rsync_cv_HAVE_SOCKETPAIR,[
 AC_TRY_RUN([
@@ -457,7 +516,7 @@ main() {
 }],
 rsync_cv_HAVE_SOCKETPAIR=yes,rsync_cv_HAVE_SOCKETPAIR=no,rsync_cv_HAVE_SOCKETPAIR=cross)])
 if test x"$rsync_cv_HAVE_SOCKETPAIR" = x"yes"; then
-    AC_DEFINE(HAVE_SOCKETPAIR, 1, [ ])
+    AC_DEFINE(HAVE_SOCKETPAIR, 1, [Define to 1 if you have the "socketpair" function])
 fi
 
 if test x"$with_included_popt" != x"yes"
@@ -481,39 +540,11 @@ else
     AC_MSG_RESULT(no)
 fi
 
-AC_CACHE_CHECK([for long long],rsync_cv_HAVE_LONGLONG,[
-AC_TRY_RUN([#include <stdio.h>
-main() { long long x = 1000000; x *= x; exit(((x/1000000) == 1000000)? 0: 1); }],
-rsync_cv_HAVE_LONGLONG=yes,rsync_cv_HAVE_LONGLONG=no,rsync_cv_HAVE_LONGLONG=cross)])
-if test x"$rsync_cv_HAVE_LONGLONG" = x"yes"; then
-    AC_DEFINE(HAVE_LONGLONG, 1, [ ])
-fi
-
-AC_CACHE_CHECK([for off64_t],rsync_cv_HAVE_OFF64_T,[
-AC_TRY_RUN([#include <stdio.h>
-#include <sys/stat.h>
-main() { struct stat64 st; off64_t s; if (sizeof(off_t) == sizeof(off64_t)) exit(1); exit((lstat64("/dev/null", &st)==0)?0:1); }],
-rsync_cv_HAVE_OFF64_T=yes,rsync_cv_HAVE_OFF64_T=no,rsync_cv_HAVE_OFF64_T=cross)])
-if test x"$rsync_cv_HAVE_OFF64_T" = x"yes"; then
-    AC_DEFINE(HAVE_OFF64_T, 1, [ ])
-fi
-
-AC_CACHE_CHECK([for short ino_t],rsync_cv_HAVE_SHORT_INO_T,[
-AC_TRY_RUN([#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-main() { if (sizeof(ino_t) < sizeof(unsigned int)) return 0; return 1; }],
-rsync_cv_HAVE_SHORT_INO_T=yes,rsync_cv_HAVE_SHORT_INO_T=no,rsync_cv_HAVE_SHORT_INO_T=cross)])
-if test x"$rsync_cv_HAVE_SHORT_INO_T" = x"yes"; then
-    AC_DEFINE(HAVE_SHORT_INO_T, 1, [ ])
-fi
-
-AC_CACHE_CHECK([for unsigned char],rsync_cv_HAVE_UNSIGNED_CHAR,[
-AC_TRY_RUN([#include <stdio.h>
-main() { char c; c=250; exit((c > 0)?0:1); }],
-rsync_cv_HAVE_UNSIGNED_CHAR=yes,rsync_cv_HAVE_UNSIGNED_CHAR=no,rsync_cv_HAVE_UNSIGNED_CHAR=cross)])
-if test x"$rsync_cv_HAVE_UNSIGNED_CHAR" = x"yes"; then
-    AC_DEFINE(HAVE_UNSIGNED_CHAR, 1, [ ])
+AC_CACHE_CHECK([for unsigned char],rsync_cv_SIGNED_CHAR_OK,[
+AC_TRY_COMPILE([],[signed char *s = ""],
+rsync_cv_SIGNED_CHAR_OK=yes,rsync_cv_SIGNED_CHAR_OK=no)])
+if test x"$rsync_cv_SIGNED_CHAR_OK" = x"yes"; then
+    AC_DEFINE(SIGNED_CHAR_OK, 1, [Define to 1 if "signed char" is a valid type])
 fi
 
 AC_CACHE_CHECK([for broken readdir],rsync_cv_HAVE_BROKEN_READDIR,[
@@ -524,26 +555,25 @@ if (di && di->d_name[-2] == '.' && di->d_name[-1] == 0 &&
 di->d_name[0] == 0) exit(0); exit(1);} ],
 rsync_cv_HAVE_BROKEN_READDIR=yes,rsync_cv_HAVE_BROKEN_READDIR=no,rsync_cv_HAVE_BROKEN_READDIR=cross)])
 if test x"$rsync_cv_HAVE_BROKEN_READDIR" = x"yes"; then
-    AC_DEFINE(HAVE_BROKEN_READDIR, 1, [ ])
+    AC_DEFINE(HAVE_BROKEN_READDIR, 1, [Define to 1 if readdir() is broken])
 fi
 
 AC_CACHE_CHECK([for utimbuf],rsync_cv_HAVE_UTIMBUF,[
 AC_TRY_COMPILE([#include <sys/types.h>
 #include <utime.h>],
 [struct utimbuf tbuf;  tbuf.actime = 0; tbuf.modtime = 1; exit(utime("foo.c",&tbuf));],
-rsync_cv_HAVE_UTIMBUF=yes,rsync_cv_HAVE_UTIMBUF=no,rsync_cv_HAVE_UTIMBUF=cross)])
+rsync_cv_HAVE_UTIMBUF=yes,rsync_cv_HAVE_UTIMBUF=no)])
 if test x"$rsync_cv_HAVE_UTIMBUF" = x"yes"; then
-    AC_DEFINE(HAVE_UTIMBUF, 1, [ ])
+    AC_DEFINE(HAVE_UTIMBUF, 1, [Define to 1 if you have the "struct utimbuf" type])
 fi
 
 AC_CACHE_CHECK([if gettimeofday takes tz argument],rsync_cv_HAVE_GETTIMEOFDAY_TZ,[
-AC_TRY_RUN([
-#include <sys/time.h>
-#include <unistd.h>
-main() { struct timeval tv; exit(gettimeofday(&tv, NULL));}],
-           rsync_cv_HAVE_GETTIMEOFDAY_TZ=yes,rsync_cv_HAVE_GETTIMEOFDAY_TZ=no,rsync_cv_HAVE_GETTIMEOFDAY_TZ=cross)])
-if test x"$rsync_cv_HAVE_GETTIMEOFDAY_TZ" = x"yes"; then
-    AC_DEFINE(HAVE_GETTIMEOFDAY_TZ, 1, [ ])
+AC_TRY_COMPILE([#include <sys/time.h>
+#include <unistd.h>],
+[struct timeval tv; exit(gettimeofday(&tv, NULL));],
+rsync_cv_HAVE_GETTIMEOFDAY_TZ=yes,rsync_cv_HAVE_GETTIMEOFDAY_TZ=no)])
+if test x"$rsync_cv_HAVE_GETTIMEOFDAY_TZ" != x"no"; then
+    AC_DEFINE(HAVE_GETTIMEOFDAY_TZ, 1, [Define to 1 if gettimeofday() takes a time-zone arg])
 fi
 
 AC_CACHE_CHECK([for C99 vsnprintf],rsync_cv_HAVE_C99_VSNPRINTF,[
@@ -568,7 +598,7 @@ main() { foo("hello"); }
 ],
 rsync_cv_HAVE_C99_VSNPRINTF=yes,rsync_cv_HAVE_C99_VSNPRINTF=no,rsync_cv_HAVE_C99_VSNPRINTF=cross)])
 if test x"$rsync_cv_HAVE_C99_VSNPRINTF" = x"yes"; then
-    AC_DEFINE(HAVE_C99_VSNPRINTF, 1, [ ])
+    AC_DEFINE(HAVE_C99_VSNPRINTF, 1, [Define to 1 if vsprintf has a C99-compatible return value])
 fi
 
 
@@ -591,7 +621,7 @@ rsync_cv_HAVE_SECURE_MKSTEMP=yes,
 rsync_cv_HAVE_SECURE_MKSTEMP=no,
 rsync_cv_HAVE_SECURE_MKSTEMP=cross)])
 if test x"$rsync_cv_HAVE_SECURE_MKSTEMP" = x"yes"; then
-    AC_DEFINE(HAVE_SECURE_MKSTEMP, 1, [ ])
+    AC_DEFINE(HAVE_SECURE_MKSTEMP, 1, [Define to 1 if mkstemp() is available and works right])
 fi
 
 
@@ -607,7 +637,7 @@ if (strcmp(inet_ntoa(ip),"18.52.86.120") &&
 exit(0);}],
            rsync_cv_REPLACE_INET_NTOA=no,rsync_cv_REPLACE_INET_NTOA=yes,rsync_cv_REPLACE_INET_NTOA=cross)])
 if test x"$rsync_cv_REPLACE_INET_NTOA" = x"yes"; then
-    AC_DEFINE(REPLACE_INET_NTOA, 1, [ ])
+    AC_DEFINE(REPLACE_INET_NTOA, 1, [Define to 1 if inet_ntoa() needs to be replaced])
 fi
 
 
@@ -621,7 +651,35 @@ main() { struct in_addr ip;
 if (inet_aton("example", &ip) == 0) exit(0); exit(1);}],
            rsync_cv_REPLACE_INET_ATON=no,rsync_cv_REPLACE_INET_ATON=yes,rsync_cv_REPLACE_INET_ATON=cross)])
 if test x"$rsync_cv_REPLACE_INET_ATON" = x"yes"; then
-    AC_DEFINE(REPLACE_INET_ATON, 1, [ ])
+    AC_DEFINE(REPLACE_INET_ATON, 1, [Define to 1 if inet_aton() needs to be replaced])
+fi
+
+AC_CACHE_CHECK([if mknod creates FIFOs],rsync_cv_MKNOD_CREATES_FIFOS,[
+AC_TRY_RUN([
+#include <stdio.h>
+#include <sys/stat.h>
+#include <errno.h>
+main() { int rc, ec; char *fn = "fifo-test";
+unlink(fn); rc = mknod(fn,S_IFIFO,0600); ec = errno; unlink(fn);
+if (rc) {printf("%d %d\n",rc,ec); return ec;}
+return 0;}],
+           rsync_cv_MKNOD_CREATES_FIFOS=yes,rsync_cv_MKNOD_CREATES_FIFOS=no,rsync_cv_MKNOD_CREATES_FIFOS=cross)])
+if test x"$rsync_cv_MKNOD_CREATES_FIFOS" = x"yes"; then
+    AC_DEFINE(MKNOD_CREATES_FIFOS, 1, [Define to 1 if mknod() can create FIFOs.])
+fi
+
+AC_CACHE_CHECK([if mknod creates sockets],rsync_cv_MKNOD_CREATES_SOCKETS,[
+AC_TRY_RUN([
+#include <stdio.h>
+#include <sys/stat.h>
+#include <errno.h>
+main() { int rc, ec; char *fn = "sock-test";
+unlink(fn); rc = mknod(fn,S_IFSOCK,0600); ec = errno; unlink(fn);
+if (rc) {printf("%d %d\n",rc,ec); return ec;}
+return 0;}],
+           rsync_cv_MKNOD_CREATES_SOCKETS=yes,rsync_cv_MKNOD_CREATES_SOCKETS=no,rsync_cv_MKNOD_CREATES_SOCKETS=cross)])
+if test x"$rsync_cv_MKNOD_CREATES_SOCKETS" = x"yes"; then
+    AC_DEFINE(MKNOD_CREATES_SOCKETS, 1, [Define to 1 if mknod() can create sockets.])
 fi
 
 #

errcode.h

@@ -28,6 +28,7 @@
 #define RERR_FILESELECT 3       /* errors selecting input/output files, dirs */
 #define RERR_UNSUPPORTED 4      /* requested action not supported */
 #define RERR_STARTCLIENT 5      /* error starting client-server protocol */
+#define RERR_LOG_FAILURE 6      /* daemon unable to append to log-file */
 
 #define RERR_SOCKETIO   10      /* error in socket IO */
 #define RERR_FILEIO     11      /* error in file IO */
@@ -40,6 +41,7 @@
 #define RERR_MALLOC     22      /* error allocating core memory buffers */
 #define RERR_PARTIAL    23      /* partial transfer */
 #define RERR_VANISHED   24      /* file(s) vanished on sender side */
+#define RERR_DEL_LIMIT  25      /* skipped some deletes due to --max-delete */
 
 #define RERR_TIMEOUT    30      /* timeout in data send/receive */
 

fileio.c

@@ -22,9 +22,10 @@
   */
 #include "rsync.h"
 
+extern int sparse_files;
+
 static char last_byte;
 static int last_sparse;
-extern int sparse_files;
 
 int sparse_end(int f)
 {
@@ -91,6 +92,7 @@ int flush_write_file(int f)
 	return ret;
 }
 
+
 /*
  * write_file does not allow incomplete writes.  It loops internally
  * until len bytes are written or errno is set.
@@ -106,9 +108,9 @@ int write_file(int f,char *buf,size_t len)
 			r1 = write_sparse(f, buf, len1);
 		} else {
 			if (!wf_writeBuf) {
-				wf_writeBufSize = MAX_MAP_SIZE;
+				wf_writeBufSize = WRITE_SIZE * 8;
 				wf_writeBufCnt  = 0;
-				wf_writeBuf = new_array(char, MAX_MAP_SIZE);
+				wf_writeBuf = new_array(char, wf_writeBufSize);
 				if (!wf_writeBuf)
 					out_of_memory("write_file");
 			}
@@ -125,7 +127,8 @@ int write_file(int f,char *buf,size_t len)
 			}
 		}
 		if (r1 <= 0) {
-			if (ret > 0) return ret;
+			if (ret > 0)
+				return ret;
 			return r1;
 		}
 		len -= r1;
@@ -136,76 +139,67 @@ int write_file(int f,char *buf,size_t len)
 }
 
 
-
-/* this provides functionality somewhat similar to mmap() but using
-   read(). It gives sliding window access to a file. mmap() is not
-   used because of the possibility of another program (such as a
-   mailer) truncating the file thus giving us a SIGBUS */
-struct map_struct *map_file(int fd,OFF_T len)
+/* This provides functionality somewhat similar to mmap() but using read().
+ * It gives sliding window access to a file.  mmap() is not used because of
+ * the possibility of another program (such as a mailer) truncating the
+ * file thus giving us a SIGBUS. */
+struct map_struct *map_file(int fd, OFF_T len, int32 read_size,
+			    int32 blk_size)
 {
 	struct map_struct *map;
-	map = new(struct map_struct);
-	if (!map) out_of_memory("map_file");
 
+	if (!(map = new(struct map_struct)))
+		out_of_memory("map_file");
+
+	if (blk_size && (read_size % blk_size))
+		read_size += blk_size - (read_size % blk_size);
+
+	memset(map, 0, sizeof map[0]);
 	map->fd = fd;
 	map->file_size = len;
-	map->p = NULL;
-	map->p_size = 0;
-	map->p_offset = 0;
-	map->p_fd_offset = 0;
-	map->p_len = 0;
-	map->status = 0;
+	map->def_window_size = read_size;
 
 	return map;
 }
 
+
 /* slide the read window in the file */
-char *map_ptr(struct map_struct *map,OFF_T offset,int len)
+char *map_ptr(struct map_struct *map, OFF_T offset, int32 len)
 {
-	int nread;
+	int32 nread;
 	OFF_T window_start, read_start;
-	int window_size, read_size, read_offset;
+	int32 window_size, read_size, read_offset;
 
-	if (len == 0) {
+	if (len == 0)
 		return NULL;
-	}
-
-	/* can't go beyond the end of file */
-	if (len > (map->file_size - offset)) {
-		len = map->file_size - offset;
+	if (len < 0) {
+		rprintf(FERROR, "invalid len passed to map_ptr: %ld\n",
+			(long)len);
+		exit_cleanup(RERR_FILEIO);
 	}
 
 	/* in most cases the region will already be available */
-	if (offset >= map->p_offset &&
-	    offset+len <= map->p_offset+map->p_len) {
-		return (map->p + (offset - map->p_offset));
-	}
-
+	if (offset >= map->p_offset && offset+len <= map->p_offset+map->p_len)
+		return map->p + (offset - map->p_offset);
 
 	/* nope, we are going to have to do a read. Work out our desired window */
-	if (offset > 2*CHUNK_SIZE) {
-		window_start = offset - 2*CHUNK_SIZE;
-		window_start &= ~((OFF_T)(CHUNK_SIZE-1)); /* assumes power of 2 */
-	} else {
-		window_start = 0;
-	}
-	window_size = MAX_MAP_SIZE;
-	if (window_start + window_size > map->file_size) {
+	window_start = offset;
+	window_size = map->def_window_size;
+	if (window_start + window_size > map->file_size)
 		window_size = map->file_size - window_start;
-	}
-	if (offset + len > window_start + window_size) {
-		window_size = (offset+len) - window_start;
-	}
+	if (len > window_size)
+		window_size = len;
 
 	/* make sure we have allocated enough memory for the window */
 	if (window_size > map->p_size) {
 		map->p = realloc_array(map->p, char, window_size);
-		if (!map->p) out_of_memory("map_ptr");
+		if (!map->p)
+			out_of_memory("map_ptr");
 		map->p_size = window_size;
 	}
 
-	/* now try to avoid re-reading any bytes by reusing any bytes from the previous
-	   buffer. */
+	/* Now try to avoid re-reading any bytes by reusing any bytes
+	 * from the previous buffer. */
 	if (window_start >= map->p_offset &&
 	    window_start < map->p_offset + map->p_len &&
 	    window_start + window_size >= map->p_offset + map->p_len) {
@@ -220,11 +214,16 @@ char *map_ptr(struct map_struct *map,OFF_T offset,int len)
 	}
 
 	if (read_size <= 0) {
-		rprintf(FINFO,"Warning: unexpected read size of %d in map_ptr\n", read_size);
+		rprintf(FERROR, "invalid read_size of %ld in map_ptr\n",
+			(long)read_size);
+		exit_cleanup(RERR_FILEIO);
 	} else {
 		if (map->p_fd_offset != read_start) {
-			if (do_lseek(map->fd,read_start,SEEK_SET) != read_start) {
-				rprintf(FERROR,"lseek failed in map_ptr\n");
+			OFF_T ret = do_lseek(map->fd, read_start, SEEK_SET);
+			if (ret != read_start) {
+				rsyserr(FERROR, errno,
+					"lseek returned %.0f, not %.0f",
+					(double)ret, (double)read_start);
 				exit_cleanup(RERR_FILEIO);
 			}
 			map->p_fd_offset = read_start;
@@ -246,7 +245,7 @@ char *map_ptr(struct map_struct *map,OFF_T offset,int len)
 	map->p_offset = window_start;
 	map->p_len = window_size;
 
-	return map->p + (offset - map->p_offset);
+	return map->p;
 }
 
 
@@ -259,9 +258,8 @@ int unmap_file(struct map_struct *map)
 		map->p = NULL;
 	}
 	ret = map->status;
-	memset(map, 0, sizeof(*map));
+	memset(map, 0, sizeof map[0]);
 	free(map);
 
 	return ret;
 }
-

getfsdev.c

@@ -0,0 +1,23 @@
+#include "rsync.h"
+
+ int main(int argc, char *argv[])
+{
+	STRUCT_STAT st;
+	int ret;
+
+	while (--argc > 0) {
+#ifdef USE_STAT64_FUNCS
+		ret = stat64(*++argv, &st);
+#else
+		ret = stat(*++argv, &st);
+#endif
+		if (ret < 0) {
+			fprintf(stderr, "Unable to stat `%s'\n", *argv);
+			exit(1);
+		}
+		printf("%ld/%ld\n", (long)major(st.st_dev),
+				    (long)minor(st.st_dev));
+	}
+
+	return 0;
+}

hlink.c

@@ -23,12 +23,18 @@
 extern int dry_run;
 extern int verbose;
 extern int make_backups;
+extern struct file_list *the_file_list;
 
-#if SUPPORT_HARD_LINKS
-static int hlink_compare(struct file_struct **file1, struct file_struct **file2)
+#ifdef SUPPORT_HARD_LINKS
+
+#define FPTR(i) (the_file_list->files[i])
+#define LINKED(p1,p2) (FPTR(p1)->F_DEV == FPTR(p2)->F_DEV \
+		    && FPTR(p1)->F_INODE == FPTR(p2)->F_INODE)
+
+static int hlink_compare(int *int1, int *int2)
 {
-	struct file_struct *f1 = *file1;
-	struct file_struct *f2 = *file2;
+	struct file_struct *f1 = FPTR(*int1);
+	struct file_struct *f2 = FPTR(*int2);
 
 	if (f1->F_DEV != f2->F_DEV)
 		return (int) (f1->F_DEV > f2->F_DEV ? 1 : -1);
@@ -36,24 +42,20 @@ static int hlink_compare(struct file_struct **file1, struct file_struct **file2)
 	if (f1->F_INODE != f2->F_INODE)
 		return (int) (f1->F_INODE > f2->F_INODE ? 1 : -1);
 
-	return file_compare(file1, file2);
+	return f_name_cmp(f1, f2);
 }
 
-static struct file_struct **hlink_list;
+static int *hlink_list;
 static int hlink_count;
 
-#define LINKED(p1,p2) ((p1)->F_DEV == (p2)->F_DEV \
-		    && (p1)->F_INODE == (p2)->F_INODE)
-
 /* Analyze the data in the hlink_list[], remove items that aren't multiply
  * linked, and replace the dev+inode data with the hlindex+next linked list. */
-static void link_idev_data(struct file_list *flist)
+static void link_idev_data(void)
 {
-	struct file_struct *head;
-	int from, to, start;
+	int head, from, to, start;
 
 	alloc_pool_t hlink_pool;
-	alloc_pool_t idev_pool = flist->hlink_pool;
+	alloc_pool_t idev_pool = the_file_list->hlink_pool;
 
 	hlink_pool = pool_create(128 * 1024, sizeof (struct hlink),
 	    out_of_memory, POOL_INTERN);
@@ -63,26 +65,27 @@ static void link_idev_data(struct file_list *flist)
 		head = hlink_list[start];
 		while (from < hlink_count-1
 		    && LINKED(hlink_list[from], hlink_list[from+1])) {
-			pool_free(idev_pool, 0, hlink_list[from]->link_u.idev);
-			hlink_list[from]->link_u.links = pool_talloc(hlink_pool,
+			pool_free(idev_pool, 0, FPTR(hlink_list[from])->link_u.idev);
+			FPTR(hlink_list[from])->link_u.links = pool_talloc(hlink_pool,
 			    struct hlink, 1, "hlink_list");
 
-			hlink_list[from]->F_HLINDEX = to;
-			hlink_list[from]->F_NEXT = hlink_list[from+1];
+			FPTR(hlink_list[from])->F_HLINDEX = to;
+			FPTR(hlink_list[from])->F_NEXT = hlink_list[from+1];
 			from++;
 		}
 		if (from > start) {
-			pool_free(idev_pool, 0, hlink_list[from]->link_u.idev);
-			hlink_list[from]->link_u.links = pool_talloc(hlink_pool,
+			pool_free(idev_pool, 0, FPTR(hlink_list[from])->link_u.idev);
+			FPTR(hlink_list[from])->link_u.links = pool_talloc(hlink_pool,
 			    struct hlink, 1, "hlink_list");
 
-			hlink_list[from]->F_HLINDEX = to;
-			hlink_list[from]->F_NEXT = head;
-			hlink_list[from]->flags |= FLAG_HLINK_EOL;
+			FPTR(head)->flags |= FLAG_HLINK_TOL;
+			FPTR(hlink_list[from])->F_HLINDEX = to;
+			FPTR(hlink_list[from])->F_NEXT = head;
+			FPTR(hlink_list[from])->flags |= FLAG_HLINK_EOL;
 			hlink_list[to++] = head;
 		} else {
-			pool_free(idev_pool, 0, head->link_u.idev);
-			head->link_u.idev = NULL;
+			pool_free(idev_pool, 0, FPTR(head)->link_u.idev);
+			FPTR(head)->link_u.idev = NULL;
 		}
 	}
 
@@ -93,33 +96,33 @@ static void link_idev_data(struct file_list *flist)
 		hlink_pool = NULL;
 	} else {
 		hlink_count = to;
-		if (!(hlink_list = realloc_array(hlink_list,
-		    struct file_struct *, hlink_count)))
+		hlink_list = realloc_array(hlink_list, int, hlink_count);
+		if (!hlink_list)
 			out_of_memory("init_hard_links");
 	}
-	flist->hlink_pool = hlink_pool;
+	the_file_list->hlink_pool = hlink_pool;
 	pool_destroy(idev_pool);
 }
 #endif
 
-void init_hard_links(struct file_list *flist)
+void init_hard_links(void)
 {
-#if SUPPORT_HARD_LINKS
+#ifdef SUPPORT_HARD_LINKS
 	int i;
 
-	if (flist->count < 2)
+	if (the_file_list->count < 2)
 		return;
 
 	if (hlink_list)
 		free(hlink_list);
 
-	if (!(hlink_list = new_array(struct file_struct *, flist->count)))
+	if (!(hlink_list = new_array(int, the_file_list->count)))
 		out_of_memory("init_hard_links");
 
 	hlink_count = 0;
-	for (i = 0; i < flist->count; i++) {
-		if (flist->files[i]->link_u.idev)
-			hlink_list[hlink_count++] = flist->files[i];
+	for (i = 0; i < the_file_list->count; i++) {
+		if (FPTR(i)->link_u.idev)
+			hlink_list[hlink_count++] = i;
 	}
 
 	qsort(hlink_list, hlink_count,
@@ -129,83 +132,102 @@ void init_hard_links(struct file_list *flist)
 		free(hlink_list);
 		hlink_list = NULL;
 	} else
-		link_idev_data(flist);
+		link_idev_data();
 #endif
 }
 
-int hard_link_check(struct file_struct *file, int skip)
+int hard_link_check(struct file_struct *file, int ndx, int skip)
 {
+#ifdef SUPPORT_HARD_LINKS
 	if (!hlink_list || !file->link_u.links)
 		return 0;
 	if (skip && !(file->flags & FLAG_HLINK_EOL))
 		hlink_list[file->F_HLINDEX] = file->F_NEXT;
-	if (hlink_list[file->F_HLINDEX] != file) {
-		if (verbose > 1) {
+	if (hlink_list[file->F_HLINDEX] != ndx) {
+		if (verbose > 2) {
 			rprintf(FINFO, "\"%s\" is a hard link\n",
-			    f_name(file));
+				safe_fname(f_name(file)));
 		}
 		return 1;
 	}
+#endif
 	return 0;
 }
 
-#if SUPPORT_HARD_LINKS
-static void hard_link_one(char *hlink1, char *hlink2)
+#ifdef SUPPORT_HARD_LINKS
+int hard_link_one(struct file_struct *file, int ndx, char *fname,
+		  int statret, STRUCT_STAT *st, char *toname, int terse,
+		  int itemizing, enum logcode code)
 {
-	if (do_link(hlink1, hlink2)) {
+	if (do_link(toname, fname)) {
 		if (verbose) {
-			rprintf(FINFO, "link %s => %s failed: %s\n",
-			    hlink2, hlink1, strerror(errno));
+			rsyserr(FERROR, errno, "link %s => %s failed",
+				full_fname(fname), safe_fname(toname));
 		}
+		return -1;
 	}
-	else if (verbose)
-		rprintf(FINFO, "%s => %s\n", hlink2, hlink1);
+
+	if (itemizing) {
+		itemize(file, ndx, statret, st,
+			ITEM_LOCAL_CHANGE | ITEM_XNAME_FOLLOWS, 0,
+			terse ? "" : toname);
+	}
+	if (code && verbose && !terse) {
+		rprintf(code, "%s => %s\n",
+			safe_fname(fname), safe_fname(toname));
+	}
+	return 0;
 }
 #endif
 
 
-
-/**
- * Create any hard links in the global hlink_list.  They were put
- * there by running init_hard_links on the filelist.
- **/
-void do_hard_links(void)
+void hard_link_cluster(struct file_struct *file, int master, int itemizing,
+		       enum logcode code)
 {
-#if SUPPORT_HARD_LINKS
-	struct file_struct *file, *first;
+#ifdef SUPPORT_HARD_LINKS
 	char hlink1[MAXPATHLEN];
 	char *hlink2;
 	STRUCT_STAT st1, st2;
-	int i;
+	int statret, ndx = master;
 
-	if (!hlink_list)
+	if (link_stat(f_name_to(file, hlink1), &st1, 0) < 0)
 		return;
-
-	for (i = 0; i < hlink_count; i++) {
-		first = file = hlink_list[i];
-		if (link_stat(f_name_to(first, hlink1), &st1) != 0)
-			continue;
-		while ((file = file->F_NEXT) != first) {
-			hlink2 = f_name(file);
-			if (link_stat(hlink2, &st2) == 0) {
-				if (st2.st_dev == st1.st_dev
-				    && st2.st_ino == st1.st_ino)
-					continue;
-				if (make_backups) {
-					if (!make_backup(hlink2))
-						continue;
-				} else if (robust_unlink(hlink2)) {
-					if (verbose > 0) {
-						rprintf(FINFO,
-						    "unlink %s failed: %s\n",
-						    full_fname(hlink2), 
-						    strerror(errno));
-					}
-					continue;
-				}
-			}
-			hard_link_one(hlink1, hlink2);
+	if (!(file->flags & FLAG_HLINK_TOL)) {
+		while (!(file->flags & FLAG_HLINK_EOL)) {
+			ndx = file->F_NEXT;
+			file = FPTR(ndx);
 		}
 	}
+	do {
+		ndx = file->F_NEXT;
+		file = FPTR(ndx);
+		if (ndx == master)
+			continue;
+		hlink2 = f_name(file);
+		if ((statret = link_stat(hlink2, &st2, 0)) == 0) {
+			if (st2.st_dev == st1.st_dev
+			    && st2.st_ino == st1.st_ino) {
+				if (itemizing) {
+					itemize(file, ndx, statret, &st2,
+						ITEM_LOCAL_CHANGE | ITEM_XNAME_FOLLOWS,
+						0, "");
+				}
+				continue;
+			}
+			if (make_backups) {
+				if (!make_backup(hlink2))
+					continue;
+			} else if (robust_unlink(hlink2)) {
+				if (verbose > 0) {
+					rsyserr(FINFO, errno,
+						"unlink %s failed",
+						full_fname(hlink2));
+				}
+				continue;
+			}
+		}
+		hard_link_one(file, ndx, hlink2, statret,
+			      &st2, hlink1, 0, itemizing, code);
+	} while (!(file->flags & FLAG_HLINK_EOL));
 #endif
 }

lib/compat.c

@@ -155,7 +155,7 @@
 {
 	unsigned char *p = (unsigned char *)&ip.s_addr;
 	static char buf[18];
-#if WORDS_BIGENDIAN
+#ifdef WORDS_BIGENDIAN
 	snprintf(buf, 18, "%d.%d.%d.%d", 
 		 (int)p[0], (int)p[1], (int)p[2], (int)p[3]);
 #else
@@ -196,7 +196,7 @@
 /* some systems don't take the 2nd argument */
 int sys_gettimeofday(struct timeval *tv)
 {
-#if HAVE_GETTIMEOFDAY_TZ
+#ifdef HAVE_GETTIMEOFDAY_TZ
 	return gettimeofday(tv, NULL);
 #else
 	return gettimeofday(tv);

lib/mdfour.c

@@ -206,9 +206,11 @@ void mdfour(unsigned char *out, unsigned char *in, int n)
 }
 
 #ifdef TEST_MDFOUR
+int protocol_version = 28;
+
 static void file_checksum1(char *fname)
 {
-	int fd, i;
+	int fd, i, was_multiple_of_64 = 1;
 	struct mdfour md;
 	unsigned char buf[64*1024], sum[16];
 	
@@ -222,9 +224,13 @@ static void file_checksum1(char *fname)
 
 	while (1) {
 		int n = read(fd, buf, sizeof(buf));
-		if (n <= 0) break;
+		if (n <= 0)
+			break;
+		was_multiple_of_64 = !(n % 64);
 		mdfour_update(&md, buf, n);
 	}
+	if (was_multiple_of_64 && protocol_version >= 27)
+		mdfour_update(&md, buf, 0);
 
 	close(fd);
 

lib/pool_alloc.c

@@ -17,10 +17,10 @@ struct alloc_pool
 	/* statistical data */
 	unsigned long		e_created;	/* extents created	*/
 	unsigned long		e_freed;	/* extents detroyed	*/
-	uint64			n_allocated;	/* calls to alloc	*/
-	uint64			n_freed;	/* calls to free	*/
-	uint64			b_allocated;	/* cum. bytes allocated	*/
-	uint64			b_freed;	/* cum. bytes freed	*/
+	int64			n_allocated;	/* calls to alloc	*/
+	int64			n_freed;	/* calls to free	*/
+	int64			b_allocated;	/* cum. bytes allocated	*/
+	int64			b_freed;	/* cum. bytes freed	*/
 };
 
 struct pool_extent
@@ -34,7 +34,7 @@ struct pool_extent
 
 struct align_test {
     void *foo;
-    uint64 bar;
+    int64 bar;
 };
 
 #define MINALIGN	offsetof(struct align_test, bar)

lib/snprintf.c

@@ -1,3 +1,7 @@
+/*
+ * NOTE: If you change this file, please merge it into rsync, samba, etc.
+ */
+
 /*
  * Copyright Patrick Powell 1995
  * This code is based on code written by Patrick Powell (papowell@astart.com)
@@ -53,14 +57,57 @@
  *    got rid of fcvt code (twas buggy and made testing harder)
  *    added C99 semantics
  *
- *  Paul Green (paulg@samba.org) April 9, 2003
- *    fixed handling of %f when converting fractions with leading zeros.
- *    (e.g., 0.025).
+ * date: 2002/12/19 19:56:31;  author: herb;  state: Exp;  lines: +2 -0
+ * actually print args for %g and %e
+ * 
+ * date: 2002/06/03 13:37:52;  author: jmcd;  state: Exp;  lines: +8 -0
+ * Since includes.h isn't included here, VA_COPY has to be defined here.  I don't
+ * see any include file that is guaranteed to be here, so I'm defining it
+ * locally.  Fixes AIX and Solaris builds.
+ * 
+ * date: 2002/06/03 03:07:24;  author: tridge;  state: Exp;  lines: +5 -13
+ * put the ifdef for HAVE_VA_COPY in one place rather than in lots of
+ * functions
+ * 
+ * date: 2002/05/17 14:51:22;  author: jmcd;  state: Exp;  lines: +21 -4
+ * Fix usage of va_list passed as an arg.  Use __va_copy before using it
+ * when it exists.
+ * 
+ * date: 2002/04/16 22:38:04;  author: idra;  state: Exp;  lines: +20 -14
+ * Fix incorrect zpadlen handling in fmtfp.
+ * Thanks to Ollie Oldham <ollie.oldham@metro-optix.com> for spotting it.
+ * few mods to make it easier to compile the tests.
+ * addedd the "Ollie" test to the floating point ones.
+ *
+ * Martin Pool (mbp@samba.org) April 2003
+ *    Remove NO_CONFIG_H so that the test case can be built within a source
+ *    tree with less trouble.
+ *    Remove unnecessary SAFE_FREE() definition.
+ *
+ * Martin Pool (mbp@samba.org) May 2003
+ *    Put in a prototype for dummy_snprintf() to quiet compiler warnings.
+ *
+ *    Move #endif to make sure VA_COPY, LDOUBLE, etc are defined even
+ *    if the C library has some snprintf functions already.
  **************************************************************/
 
-#ifndef NO_CONFIG_H /* for some tests */
+#ifndef NO_CONFIG_H
 #include "config.h"
-#endif
+#else
+#define NULL 0
+#endif 
+
+#ifdef TEST_SNPRINTF /* need math library headers for testing */
+
+/* In test mode, we pretend that this system doesn't have any snprintf
+ * functions, regardless of what config.h says. */
+#  undef HAVE_SNPRINTF
+#  undef HAVE_VSNPRINTF
+#  undef HAVE_C99_VSNPRINTF
+#  undef HAVE_ASPRINTF
+#  undef HAVE_VASPRINTF
+#  include <math.h>
+#endif /* TEST_SNPRINTF */
 
 #ifdef HAVE_STRING_H
 #include <string.h>
@@ -82,8 +129,9 @@
 /* only include stdio.h if we are not re-defining snprintf or vsnprintf */
 #include <stdio.h>
  /* make the compiler happy with an empty file */
+ void dummy_snprintf(void);
  void dummy_snprintf(void) {} 
-#else
+#endif /* HAVE_SNPRINTF, etc */
 
 #ifdef HAVE_LONG_DOUBLE
 #define LDOUBLE long double
@@ -91,21 +139,22 @@
 #define LDOUBLE double
 #endif
 
-#ifdef HAVE_LONG_LONG
+#if SIZEOF_LONG_LONG
 #define LLONG long long
 #else
 #define LLONG long
 #endif
 
-static size_t dopr(char *buffer, size_t maxlen, const char *format, 
-		   va_list args);
-static void fmtstr(char *buffer, size_t *currlen, size_t maxlen,
-		    char *value, int flags, int min, int max);
-static void fmtint(char *buffer, size_t *currlen, size_t maxlen,
-		    long value, int base, int min, int max, int flags);
-static void fmtfp(char *buffer, size_t *currlen, size_t maxlen,
-		   LDOUBLE fvalue, int min, int max, int flags);
-static void dopr_outch(char *buffer, size_t *currlen, size_t maxlen, char c);
+#ifndef VA_COPY
+#ifdef HAVE_VA_COPY
+#define VA_COPY(dest, src) va_copy(dest, src)
+#else
+#ifdef HAVE___VA_COPY
+#define VA_COPY(dest, src) __va_copy(dest, src)
+#else
+#define VA_COPY(dest, src) (dest) = (src)
+#endif
+#endif
 
 /*
  * dopr(): poor man's version of doprintf
@@ -141,7 +190,20 @@ static void dopr_outch(char *buffer, size_t *currlen, size_t maxlen, char c);
 #define MAX(p,q) (((p) >= (q)) ? (p) : (q))
 #endif
 
-static size_t dopr(char *buffer, size_t maxlen, const char *format, va_list args)
+/* yes this really must be a ||. Don't muck with this (tridge) */
+#if !defined(HAVE_VSNPRINTF) || !defined(HAVE_C99_VSNPRINTF)
+
+static size_t dopr(char *buffer, size_t maxlen, const char *format, 
+		   va_list args_in);
+static void fmtstr(char *buffer, size_t *currlen, size_t maxlen,
+		    char *value, int flags, int min, int max);
+static void fmtint(char *buffer, size_t *currlen, size_t maxlen,
+		    long value, int base, int min, int max, int flags);
+static void fmtfp(char *buffer, size_t *currlen, size_t maxlen,
+		   LDOUBLE fvalue, int min, int max, int flags);
+static void dopr_outch(char *buffer, size_t *currlen, size_t maxlen, char c);
+
+static size_t dopr(char *buffer, size_t maxlen, const char *format, va_list args_in)
 {
 	char ch;
 	LLONG value;
@@ -153,6 +215,9 @@ static size_t dopr(char *buffer, size_t maxlen, const char *format, va_list args
 	int flags;
 	int cflags;
 	size_t currlen;
+	va_list args;
+
+	VA_COPY(args, args_in);
 	
 	state = DP_S_DEFAULT;
 	currlen = flags = cflags = min = 0;
@@ -322,6 +387,7 @@ static size_t dopr(char *buffer, size_t maxlen, const char *format, va_list args
 					fvalue = va_arg (args, LDOUBLE);
 				else
 					fvalue = va_arg (args, double);
+				fmtfp (buffer, &currlen, maxlen, fvalue, min, max, flags);
 				break;
 			case 'G':
 				flags |= DP_F_UP;
@@ -330,12 +396,14 @@ static size_t dopr(char *buffer, size_t maxlen, const char *format, va_list args
 					fvalue = va_arg (args, LDOUBLE);
 				else
 					fvalue = va_arg (args, double);
+				fmtfp (buffer, &currlen, maxlen, fvalue, min, max, flags);
 				break;
 			case 'c':
 				dopr_outch (buffer, &currlen, maxlen, va_arg (args, int));
 				break;
 			case 's':
 				strvalue = va_arg (args, char *);
+				if (!strvalue) strvalue = "(NULL)";
 				if (max == -1) {
 					max = strlen(strvalue);
 				}
@@ -564,28 +632,26 @@ static double my_modf(double x0, double *iptr)
 
 	for (i=0;i<100;i++) {
 		l = (long)x;
-		if (l <= (x+1) && l >= (x-1)) break;
+		if (l <= (x+1) && l >= (x-1)) {
+			if (i != 0) {
+				double i2;
+				double ret;
+
+				ret = my_modf(x0-l*f, &i2);
+				(*iptr) = l*f + i2;
+				return ret;
+			} 
+
+			(*iptr) = l;
+			return x - (*iptr);
+		}
 		x *= 0.1;
 		f *= 10.0;
 	}
 
-	if (i == 100) {
-		/* yikes! the number is beyond what we can handle. What do we do? */
-		(*iptr) = 0;
-		return 0;
-	}
-
-	if (i != 0) {
-		double i2;
-		double ret;
-
-		ret = my_modf(x0-l*f, &i2);
-		(*iptr) = l*f + i2;
-		return ret;
-	} 
-
-	(*iptr) = l;
-	return x - (*iptr);
+	/* yikes! the number is beyond what we can handle. What do we do? */
+	(*iptr) = 0;
+	return 0;
 }
 
 
@@ -601,7 +667,7 @@ static void fmtfp (char *buffer, size_t *currlen, size_t maxlen,
 	int padlen = 0; /* amount to pad */
 	int zpadlen = 0; 
 	int caps = 0;
-	int index;
+	int idx;
 	double intpart;
 	double fracpart;
 	double temp;
@@ -658,14 +724,13 @@ static void fmtfp (char *buffer, size_t *currlen, size_t maxlen,
 
 	/* Convert integer part */
 	do {
-		temp = intpart;
-		my_modf(intpart*0.1, &intpart);
-		temp = temp*0.1;
-		index = (int) ((temp -intpart +0.05)* 10.0);
-		/* index = (int) (((double)(temp*0.1) -intpart +0.05) *10.0); */
-		/* printf ("%llf, %f, %x\n", temp, intpart, index); */
+		temp = intpart*0.1;
+		my_modf(temp, &intpart);
+		idx = (int) ((temp -intpart +0.05)* 10.0);
+		/* idx = (int) (((double)(temp*0.1) -intpart +0.05) *10.0); */
+		/* printf ("%llf, %f, %x\n", temp, intpart, idx); */
 		iconvert[iplace++] =
-			(caps? "0123456789ABCDEF":"0123456789abcdef")[index];
+			(caps? "0123456789ABCDEF":"0123456789abcdef")[idx];
 	} while (intpart && (iplace < 311));
 	if (iplace == 311) iplace--;
 	iconvert[iplace] = 0;
@@ -674,14 +739,13 @@ static void fmtfp (char *buffer, size_t *currlen, size_t maxlen,
 	if (fracpart)
 	{
 		do {
-			temp = fracpart;
-			my_modf(fracpart*0.1, &fracpart);
-			temp = temp*0.1;
-			index = (int) ((temp -fracpart +0.05)* 10.0);
-			/* index = (int) ((((temp/10) -fracpart) +0.05) *10); */
-			/* printf ("%lf, %lf, %ld\n", temp, fracpart, index); */
+			temp = fracpart*0.1;
+			my_modf(temp, &fracpart);
+			idx = (int) ((temp -fracpart +0.05)* 10.0);
+			/* idx = (int) ((((temp/10) -fracpart) +0.05) *10); */
+			/* printf ("%lf, %lf, %ld\n", temp, fracpart, idx ); */
 			fconvert[fplace++] =
-			(caps? "0123456789ABCDEF":"0123456789abcdef")[index];
+			(caps? "0123456789ABCDEF":"0123456789abcdef")[idx];
 		} while(fracpart && (fplace < 311));
 		if (fplace == 311) fplace--;
 	}
@@ -729,14 +793,14 @@ static void fmtfp (char *buffer, size_t *currlen, size_t maxlen,
 		dopr_outch (buffer, currlen, maxlen, '.');
 		
 		while (zpadlen > 0) {
-		  dopr_outch (buffer, currlen, maxlen, '0');
-		  --zpadlen;
+			dopr_outch (buffer, currlen, maxlen, '0');
+			--zpadlen;
 		}
 
 		while (fplace > 0) 
 			dopr_outch (buffer, currlen, maxlen, fconvert[--fplace]);
 	}
-	
+
 	while (padlen < 0) {
 		dopr_outch (buffer, currlen, maxlen, ' ');
 		++padlen;
@@ -751,17 +815,21 @@ static void dopr_outch(char *buffer, size_t *currlen, size_t maxlen, char c)
 	(*currlen)++;
 }
 
-#if !defined(HAVE_VSNPRINTF) || !defined(HAVE_C99_VSNPRINTF)
-#define vsnprintf rsync_vsnprintf
- int vsnprintf(char *str, size_t count, const char *fmt, va_list args)
+ int rsync_vsnprintf (char *str, size_t count, const char *fmt, va_list args)
 {
 	return dopr(str, count, fmt, args);
 }
+#define vsnprintf rsync_vsnprintf
 #endif
 
+/* yes this really must be a ||. Don't muck with this (tridge)
+ *
+ * The logic for these two is that we need our own definition if the
+ * OS *either* has no definition of *sprintf, or if it does have one
+ * that doesn't work properly according to the autoconf test.
+ */
 #if !defined(HAVE_SNPRINTF) || !defined(HAVE_C99_VSNPRINTF)
-#define snprintf rsync_snprintf
- int snprintf(char *str,size_t count,const char *fmt,...)
+int rsync_snprintf(char *str,size_t count,const char *fmt,...)
 {
 	size_t ret;
 	va_list ap;
@@ -771,6 +839,7 @@ static void dopr_outch(char *buffer, size_t *currlen, size_t maxlen, char c)
 	va_end(ap);
 	return ret;
 }
+#define snprintf rsync_snprintf
 #endif
 
 #endif 
@@ -779,13 +848,19 @@ static void dopr_outch(char *buffer, size_t *currlen, size_t maxlen, char c)
  int vasprintf(char **ptr, const char *format, va_list ap)
 {
 	int ret;
+	va_list ap2;
+
+	VA_COPY(ap2, ap);
 	
-	ret = vsnprintf(NULL, 0, format, ap);
+	ret = vsnprintf(NULL, 0, format, ap2);
 	if (ret <= 0) return ret;
 
 	(*ptr) = (char *)malloc(ret+1);
 	if (!*ptr) return -1;
-	ret = vsnprintf(*ptr, ret+1, format, ap);
+
+	VA_COPY(ap2, ap);
+
+	ret = vsnprintf(*ptr, ret+1, format, ap2);
 
 	return ret;
 }
@@ -798,6 +873,7 @@ static void dopr_outch(char *buffer, size_t *currlen, size_t maxlen, char c)
 	va_list ap;
 	int ret;
 	
+	*ptr = NULL;
 	va_start(ap, format);
 	ret = vasprintf(ptr, format, ap);
 	va_end(ap);
@@ -832,8 +908,9 @@ static void dopr_outch(char *buffer, size_t *currlen, size_t maxlen, char c)
 		"-16.16f",
 		NULL
 	};
-	double fp_nums[] = { 6442452944.1234, -1.5, 134.21, 91340.2, 341.1234, 0203.9, 0.96, 0.996, 
-			     0.9996, 1.996, 4.136,  0};
+	double fp_nums[] = { 6442452944.1234, -1.5, 134.21, 91340.2, 341.1234, 203.9, 0.96, 0.996, 
+			     0.9996, 1.996, 4.136, 5.030201, 0.00205,
+			     /* END LIST */ 0};
 	char *int_fmt[] = {
 		"%-1.5d",
 		"%1.5d",
@@ -928,8 +1005,10 @@ static void dopr_outch(char *buffer, size_t *currlen, size_t maxlen, char c)
 	{
 		double v0 = 0.12345678901234567890123456789012345678901;
 		for (x=0; x<100; x++) {
-			snprintf(buf1, sizeof(buf1), "%1.1f", v0*pow(10, x));
-			sprintf(buf2,                "%1.1f", v0*pow(10, x));
+			double p = pow(10, x); 
+			double r = v0*p;
+			snprintf(buf1, sizeof(buf1), "%1.1f", r);
+			sprintf(buf2,                "%1.1f", r);
 			if (strcmp(buf1, buf2)) {
 				printf("we seem to support %d digits\n", x-1);
 				break;
@@ -939,4 +1018,4 @@ static void dopr_outch(char *buffer, size_t *currlen, size_t maxlen, char c)
 
 	return 0;
 }
-#endif /* SNPRINTF_TEST */
+#endif /* TEST_SNPRINTF */

lib/wildmatch.c

@@ -57,10 +57,10 @@
 int wildmatch_iteration_count;
 #endif
 
-static int domatch(const unsigned char *p, const unsigned char *text)
+static int domatch(const uchar *p, const uchar *text)
 {
     int matched, special;
-    unsigned char ch, prev;
+    uchar ch, prev;
 
 #ifdef WILD_TEST_ITERATIONS
     wildmatch_iteration_count++;
@@ -141,9 +141,9 @@ static int domatch(const unsigned char *p, const unsigned char *text)
 		    ch = 0; /* This makes "prev" get set to 0. */
 		}
 		else if (ch == '[' && p[1] == ':') {
-		    const unsigned char *s = p += 2;
+		    const uchar *s;
 		    int i;
-		    while ((ch = *p) && ch != ']') p++;
+		    for (s = p += 2; (ch = *p) && ch != ']'; p++) {}
 		    if (!ch)
 			return ABORT_ALL;
 		    i = p - s - 1;
@@ -225,5 +225,5 @@ int wildmatch(const char *p, const char *t)
 #ifdef WILD_TEST_ITERATIONS
     wildmatch_iteration_count = 0;
 #endif
-    return domatch((const unsigned char*)p, (const unsigned char*)t) == TRUE;
+    return domatch((const uchar*)p, (const uchar*)t) == TRUE;
 }

loadparm.c

@@ -102,8 +102,10 @@ typedef struct
 	char *log_file;
 	char *pid_file;
 	char *socket_options;
+	char *bind_address;
 	int syslog_facility;
 	int max_verbosity;
+	int rsync_port;
 } global;
 
 static global Globals;
@@ -119,6 +121,7 @@ typedef struct
 	char *comment;
 	char *lock_file;
 	BOOL read_only;
+	BOOL write_only;
 	BOOL list;
 	BOOL use_chroot;
 	BOOL transfer_logging;
@@ -130,6 +133,7 @@ typedef struct
 	char *auth_users;
 	char *secrets_file;
 	BOOL strict_modes;
+	char *filter;
 	char *exclude;
 	char *exclude_from;
 	char *include;
@@ -151,6 +155,7 @@ static service sDefault =
 	NULL,    /* comment */
 	DEFAULT_LOCK_FILE,    /* lock file */
 	True,    /* read only */
+	False,   /* write only */
 	True,    /* list */
 	True,    /* use chroot */
 	False,   /* transfer logging */
@@ -171,6 +176,7 @@ static service sDefault =
 	NULL,    /* auth users */
 	NULL,    /* secrets file */
 	True,   /* strict modes */
+	NULL,    /* filter */
 	NULL,    /* exclude */
 	NULL,    /* exclude from */
 	NULL,    /* include */
@@ -269,6 +275,8 @@ static struct parm_struct parm_table[] =
   {"log file",         P_STRING,  P_GLOBAL, &Globals.log_file,      NULL,  0},
   {"pid file",         P_STRING,  P_GLOBAL, &Globals.pid_file,      NULL,  0},
   {"max verbosity",    P_INTEGER, P_GLOBAL, &Globals.max_verbosity, NULL,  0},
+  {"port",             P_INTEGER, P_GLOBAL, &Globals.rsync_port,    NULL,  0},
+  {"address",          P_STRING,  P_GLOBAL, &Globals.bind_address,  NULL,  0},
 
   {"timeout",          P_INTEGER, P_LOCAL,  &sDefault.timeout,     NULL,  0},
   {"max connections",  P_INTEGER, P_LOCAL,  &sDefault.max_connections,NULL, 0},
@@ -277,6 +285,7 @@ static struct parm_struct parm_table[] =
   {"lock file",        P_STRING,  P_LOCAL,  &sDefault.lock_file,   NULL,   0},
   {"path",             P_PATH,    P_LOCAL,  &sDefault.path,        NULL,   0},
   {"read only",        P_BOOL,    P_LOCAL,  &sDefault.read_only,   NULL,   0},
+  {"write only",       P_BOOL,    P_LOCAL,  &sDefault.write_only,  NULL,   0},
   {"list",             P_BOOL,    P_LOCAL,  &sDefault.list,        NULL,   0},
   {"use chroot",       P_BOOL,    P_LOCAL,  &sDefault.use_chroot,  NULL,   0},
   {"ignore nonreadable",P_BOOL,   P_LOCAL,  &sDefault.ignore_nonreadable,  NULL,   0},
@@ -287,6 +296,7 @@ static struct parm_struct parm_table[] =
   {"auth users",       P_STRING,  P_LOCAL,  &sDefault.auth_users,  NULL,   0},
   {"secrets file",     P_STRING,  P_LOCAL,  &sDefault.secrets_file,NULL,   0},
   {"strict modes",     P_BOOL,    P_LOCAL,  &sDefault.strict_modes,NULL,   0},
+  {"filter",           P_STRING,  P_LOCAL,  &sDefault.filter,      NULL,   0},
   {"exclude",          P_STRING,  P_LOCAL,  &sDefault.exclude,     NULL,   0},
   {"exclude from",     P_STRING,  P_LOCAL,  &sDefault.exclude_from,NULL,   0},
   {"include",          P_STRING,  P_LOCAL,  &sDefault.include,     NULL,   0},
@@ -350,12 +360,15 @@ FN_GLOBAL_STRING(lp_pid_file, &Globals.pid_file)
 FN_GLOBAL_STRING(lp_socket_options, &Globals.socket_options)
 FN_GLOBAL_INTEGER(lp_syslog_facility, &Globals.syslog_facility)
 FN_GLOBAL_INTEGER(lp_max_verbosity, &Globals.max_verbosity)
+FN_GLOBAL_INTEGER(lp_rsync_port, &Globals.rsync_port)
+FN_GLOBAL_STRING(lp_bind_address, &Globals.bind_address)
 
 FN_LOCAL_STRING(lp_name, name)
 FN_LOCAL_STRING(lp_comment, comment)
 FN_LOCAL_STRING(lp_path, path)
 FN_LOCAL_STRING(lp_lock_file, lock_file)
 FN_LOCAL_BOOL(lp_read_only, read_only)
+FN_LOCAL_BOOL(lp_write_only, write_only)
 FN_LOCAL_BOOL(lp_list, list)
 FN_LOCAL_BOOL(lp_use_chroot, use_chroot)
 FN_LOCAL_BOOL(lp_transfer_logging, transfer_logging)
@@ -368,6 +381,7 @@ FN_LOCAL_STRING(lp_hosts_deny, hosts_deny)
 FN_LOCAL_STRING(lp_auth_users, auth_users)
 FN_LOCAL_STRING(lp_secrets_file, secrets_file)
 FN_LOCAL_BOOL(lp_strict_modes, strict_modes)
+FN_LOCAL_STRING(lp_filter, filter)
 FN_LOCAL_STRING(lp_exclude, exclude)
 FN_LOCAL_STRING(lp_exclude_from, exclude_from)
 FN_LOCAL_STRING(lp_include, include)
@@ -807,7 +821,7 @@ int lp_number(char *name)
    int iService;
 
    for (iService = iNumServices - 1; iService >= 0; iService--)
-      if (strequal(lp_name(iService), name))
+      if (strcmp(lp_name(iService), name) == 0)
          break;
 
    return (iService);

log.c

@@ -27,12 +27,19 @@
   */
 #include "rsync.h"
 
+extern int verbose;
+extern int dry_run;
 extern int am_daemon;
 extern int am_server;
 extern int am_sender;
+extern int local_server;
 extern int quiet;
 extern int module_id;
 extern int msg_fd_out;
+extern int protocol_version;
+extern int preserve_times;
+extern int log_format_has_o_or_i;
+extern int daemon_log_format_has_o_or_i;
 extern char *auth_user;
 extern char *log_format;
 
@@ -41,7 +48,7 @@ static char *logfname;
 static FILE *logfile;
 struct stats stats;
 
-int log_got_error=0;
+int log_got_error = 0;
 
 struct {
         int code;
@@ -52,6 +59,7 @@ struct {
 	{ RERR_FILESELECT , "errors selecting input/output files, dirs" },
 	{ RERR_UNSUPPORTED, "requested action not supported" },
 	{ RERR_STARTCLIENT, "error starting client-server protocol" },
+	{ RERR_LOG_FAILURE, "daemon unable to append to log-file" },
 	{ RERR_SOCKETIO   , "error in socket IO" },
 	{ RERR_FILEIO     , "error in file IO" },
 	{ RERR_STREAMIO   , "error in rsync protocol data stream" },
@@ -61,12 +69,13 @@ struct {
 	{ RERR_WAITCHILD  , "some error returned by waitpid()" },
 	{ RERR_MALLOC     , "error allocating core memory buffers" },
 	{ RERR_PARTIAL    , "some files could not be transferred" },
-	{ RERR_VANISHED   , "some files vanished before they could be transfered" },
+	{ RERR_VANISHED   , "some files vanished before they could be transferred" },
 	{ RERR_TIMEOUT    , "timeout in data send/receive" },
 	{ RERR_CMD_FAILED , "remote shell failed" },
 	{ RERR_CMD_KILLED , "remote shell killed" },
-	{ RERR_CMD_RUN,     "remote command could not be run" },
-	{ RERR_CMD_NOTFOUND, "remote command not found" },
+	{ RERR_CMD_RUN    , "remote command could not be run" },
+	{ RERR_CMD_NOTFOUND,"remote command not found" },
+	{ RERR_DEL_LIMIT  , "the --max-delete limit stopped deletions" },
 	{ 0, NULL }
 };
 
@@ -104,7 +113,8 @@ void log_init(void)
 	int options = LOG_PID;
 	time_t t;
 
-	if (log_initialised) return;
+	if (log_initialised)
+		return;
 	log_initialised = 1;
 
 	/* this looks pointless, but it is needed in order for the
@@ -145,6 +155,11 @@ void log_open(void)
 		int old_umask = umask(022 | orig_umask);
 		logfile = fopen(logfname, "a");
 		umask(old_umask);
+		if (!logfile) {
+			am_daemon = 0; /* avoid trying to log again */
+			rsyserr(FERROR, errno, "fopen() of log-file failed");
+			exit_cleanup(RERR_LOG_FAILURE);
+		}
 	}
 }
 
@@ -160,7 +175,7 @@ void log_close(void)
  * it with FINFO, FERROR or FLOG */
 void rwrite(enum logcode code, char *buf, int len)
 {
-	FILE *f=NULL;
+	FILE *f = NULL;
 	/* recursion can happen with certain fatal conditions */
 
 	if (quiet && code == FINFO)
@@ -171,45 +186,41 @@ void rwrite(enum logcode code, char *buf, int len)
 
 	buf[len] = 0;
 
-	if (code == FLOG) {
-		if (am_daemon) logit(LOG_INFO, buf);
+	if (am_server && msg_fd_out >= 0) {
+		/* Pass the message to our sibling. */
+		send_msg((enum msgcode)code, buf, len);
 		return;
 	}
 
+	if (code == FCLIENT)
+		code = FINFO;
+	else if (am_daemon) {
+		static int in_block;
+		char msg[2048];
+		int priority = code == FERROR ? LOG_WARNING : LOG_INFO;
+
+		if (in_block)
+			return;
+		in_block = 1;
+		if (!log_initialised)
+			log_init();
+		strlcpy(msg, buf, MIN((int)sizeof msg, len + 1));
+		logit(priority, msg);
+		in_block = 0;
+
+		if (code == FLOG || !am_server)
+			return;
+	} else if (code == FLOG)
+		return;
+
 	if (am_server) {
-		/* Pass it to non-server side, perhaps through our sibling. */
-		if (msg_fd_out >= 0) {
-			send_msg((enum msgcode)code, buf, len);
+		/* Pass the message to the non-server side. */
+		if (io_multiplex_write((enum msgcode)code, buf, len))
+			return;
+		if (am_daemon) {
+			/* TODO: can we send the error to the user somehow? */
 			return;
 		}
-		if (!am_daemon
-		    && io_multiplex_write((enum msgcode)code, buf, len))
-			return;
-	}
-
-	/* otherwise, if in daemon mode and either we are not a server
-	 *  (that is, we are not running --daemon over a remote shell) or
-	 *  the log has already been initialised, log the message on this
-	 *  side because we don't want the client to see most errors for
-	 *  security reasons.  We do want early messages when running daemon
-	 *  mode over a remote shell to go to the remote side; those will
-	 *  fall through to the next case.
-	 * Note that this is only for the time before multiplexing is enabled.
-	 */
-	if (am_daemon && (!am_server || log_initialised)) {
-		static int depth;
-		int priority = LOG_INFO;
-		if (code == FERROR) priority = LOG_WARNING;
-
-		if (depth) return;
-
-		depth++;
-
-		log_init();
-		logit(priority, buf);
-
-		depth--;
-		return;
 	}
 
 	if (code == FERROR) {
@@ -217,55 +228,53 @@ void rwrite(enum logcode code, char *buf, int len)
 		f = stderr;
 	}
 
-	if (code == FINFO) {
-		if (am_server)
-			f = stderr;
-		else
-			f = stdout;
-	}
+	if (code == FINFO)
+		f = am_server ? stderr : stdout;
 
-	if (!f) exit_cleanup(RERR_MESSAGEIO);
+	if (!f)
+		exit_cleanup(RERR_MESSAGEIO);
 
-	if (fwrite(buf, len, 1, f) != 1) exit_cleanup(RERR_MESSAGEIO);
+	if (fwrite(buf, len, 1, f) != 1)
+		exit_cleanup(RERR_MESSAGEIO);
 
-	if (buf[len-1] == '\r' || buf[len-1] == '\n') fflush(f);
+	if (buf[len-1] == '\r' || buf[len-1] == '\n')
+		fflush(f);
 }
-		
+
 
 /* This is the rsync debugging function. Call it with FINFO, FERROR or
  * FLOG. */
 void rprintf(enum logcode code, const char *format, ...)
 {
 	va_list ap;
-	char buf[1024];
-	int len;
+	char buf[MAXPATHLEN+512];
+	size_t len;
 
 	va_start(ap, format);
-	/* Note: might return -1 */
-	len = vsnprintf(buf, sizeof(buf), format, ap);
+	len = vsnprintf(buf, sizeof buf, format, ap);
 	va_end(ap);
 
 	/* Deal with buffer overruns.  Instead of panicking, just
-	 * truncate the resulting string.  Note that some vsnprintf()s
-	 * return -1 on truncation, e.g., glibc 2.0.6 and earlier. */
-	if ((size_t) len > sizeof(buf)-1  ||  len < 0) {
+	 * truncate the resulting string.  (Note that configure ensures
+	 * that we have a vsnprintf() that doesn't ever return -1.) */
+	if (len > sizeof buf - 1) {
 		const char ellipsis[] = "[...]";
 
 		/* Reset length, and zero-terminate the end of our buffer */
-		len = sizeof(buf)-1;
+		len = sizeof buf - 1;
 		buf[len] = '\0';
 
 		/* Copy the ellipsis to the end of the string, but give
 		 * us one extra character:
 		 *
-		 *                  v--- null byte at buf[sizeof(buf)-1]
+		 *                  v--- null byte at buf[sizeof buf - 1]
 		 *        abcdefghij0
 		 *     -> abcd[...]00  <-- now two null bytes at end
 		 *
 		 * If the input format string has a trailing newline,
 		 * we copy it into that extra null; if it doesn't, well,
 		 * all we lose is one byte.  */
-		strncpy(buf+len-sizeof(ellipsis), ellipsis, sizeof(ellipsis));
+		strncpy(buf+len-sizeof ellipsis, ellipsis, sizeof ellipsis);
 		if (format[strlen(format)-1] == '\n') {
 			buf[len-1] = '\n';
 		}
@@ -286,33 +295,23 @@ void rprintf(enum logcode code, const char *format, ...)
 void rsyserr(enum logcode code, int errcode, const char *format, ...)
 {
 	va_list ap;
-	char buf[1024];
-	int len;
-	size_t sys_len;
-	char *sysmsg;
+	char buf[MAXPATHLEN+512];
+	size_t len;
+
+	strcpy(buf, RSYNC_NAME ": ");
+	len = (sizeof RSYNC_NAME ": ") - 1;
 
 	va_start(ap, format);
-	/* Note: might return <0 */
-	len = vsnprintf(buf, sizeof(buf), format, ap);
+	len += vsnprintf(buf + len, sizeof buf - len, format, ap);
 	va_end(ap);
 
-	/* TODO: Put in RSYNC_NAME at the start. */
-
-	if ((size_t) len > sizeof(buf)-1)
+	if (len < sizeof buf) {
+		len += snprintf(buf + len, sizeof buf - len,
+				": %s (%d)\n", strerror(errcode), errcode);
+	}
+	if (len >= sizeof buf)
 		exit_cleanup(RERR_MESSAGEIO);
 
-	sysmsg = strerror(errcode);
-	sys_len = strlen(sysmsg);
-	if ((size_t) len + 3 + sys_len > sizeof(buf) - 1)
-		exit_cleanup(RERR_MESSAGEIO);
-
-	strcpy(buf + len, ": ");
-	len += 2;
-	strcpy(buf + len, sysmsg);
-	len += sys_len;
-	strcpy(buf + len, "\n");
-	len++;
-
 	rwrite(code, buf, len);
 }
 
@@ -321,7 +320,7 @@ void rsyserr(enum logcode code, int errcode, const char *format, ...)
 void rflush(enum logcode code)
 {
 	FILE *f = NULL;
-	
+
 	if (am_daemon) {
 		return;
 	}
@@ -349,49 +348,96 @@ void rflush(enum logcode code)
 
 /* a generic logging routine for send/recv, with parameter
  * substitiution */
-static void log_formatted(enum logcode code,
-			  char *format, char *op, struct file_struct *file,
-			  struct stats *initial_stats)
+static void log_formatted(enum logcode code, char *format, char *op,
+			  struct file_struct *file, struct stats *initial_stats,
+			  int iflags, char *hlink)
 {
-	char buf[1024];
-	char buf2[1024];
+	char buf[MAXPATHLEN+1024], buf2[MAXPATHLEN], fmt[32];
 	char *p, *s, *n;
-	size_t l;
+	size_t len, total;
 	int64 b;
 
-	/* We expand % codes one by one in place in buf.  We don't
-	 * copy in the terminating nul of the inserted strings, but
-	 * rather keep going until we reach the nul of the format.
-	 * Just to make sure we don't clobber that nul and therefore
-	 * accidentally keep going, we zero the buffer now. */
-	memset(buf, 0, sizeof buf);
-	strlcpy(buf, format, sizeof(buf));
-	
-	for (s = &buf[0]; s && (p = strchr(s,'%')); ) {
-		n = NULL;
-		s = p + 1;
+	*fmt = '%';
 
-		switch (p[1]) {
+	/* We expand % codes one by one in place in buf.  We don't
+	 * copy in the terminating null of the inserted strings, but
+	 * rather keep going until we reach the null of the format. */
+	total = strlcpy(buf, format, sizeof buf);
+	if (total > MAXPATHLEN) {
+		rprintf(FERROR, "log-format string is WAY too long!\n");
+		exit_cleanup(RERR_MESSAGEIO);
+	}
+	buf[total++] = '\n';
+	buf[total] = '\0';
+
+	for (p = buf; (p = strchr(p, '%')) != NULL; ) {
+		s = p++;
+		n = fmt + 1;
+		if (*p == '-')
+			*n++ = *p++;
+		while (isdigit(*(uchar*)p) && n - fmt < (int)(sizeof fmt) - 8)
+			*n++ = *p++;
+		if (!*p)
+			break;
+		*n = '\0';
+		n = NULL;
+
+		switch (*p) {
 		case 'h': if (am_daemon) n = client_name(0); break;
 		case 'a': if (am_daemon) n = client_addr(0); break;
 		case 'l':
-			snprintf(buf2,sizeof(buf2),"%.0f",
+			strlcat(fmt, ".0f", sizeof fmt);
+			snprintf(buf2, sizeof buf2, fmt,
 				 (double)file->length);
 			n = buf2;
 			break;
 		case 'p':
-			snprintf(buf2,sizeof(buf2),"%d",
-				 (int)getpid());
+			strlcat(fmt, "ld", sizeof fmt);
+			snprintf(buf2, sizeof buf2, fmt,
+				 (long)getpid());
 			n = buf2;
 			break;
 		case 'o': n = op; break;
 		case 'f':
-			pathjoin(buf2, sizeof buf2,
-				 file->basedir ? file->basedir : "",
-				 f_name(file));
-			clean_fname(buf2);
+			n = safe_fname(f_name(file));
+			if (am_sender && file->dir.root) {
+				pathjoin(buf2, sizeof buf2,
+					 file->dir.root, n);
+				/* The buffer from safe_fname() has more
+				 * room than MAXPATHLEN, so this is safe. */
+				if (fmt[1])
+					strcpy(n, buf2);
+				else
+					n = buf2;
+			}
+			clean_fname(n, 0);
+			if (*n == '/')
+				n++;
+			break;
+		case 'n':
+			n = safe_fname(f_name(file));
+			if (S_ISDIR(file->mode)) {
+				/* The buffer from safe_fname() has more
+				 * room than MAXPATHLEN, so this is safe. */
+				strcat(n, "/");
+			}
+			break;
+		case 'L':
+			if (hlink && *hlink) {
+				n = safe_fname(hlink);
+				strcpy(buf2, " => ");
+			} else if (S_ISLNK(file->mode) && file->u.link) {
+				n = safe_fname(file->u.link);
+				strcpy(buf2, " -> ");
+			} else {
+				n = "";
+				if (!fmt[1])
+					break;
+				strcpy(buf2, "    ");
+			}
+			strlcat(fmt, "s", sizeof fmt);
+			snprintf(buf2 + 4, sizeof buf2 - 4, fmt, n);
 			n = buf2;
-			if (*n == '/') n++;
 			break;
 		case 'm': n = lp_name(module_id); break;
 		case 't': n = timestring(time(NULL)); break;
@@ -405,7 +451,8 @@ static void log_formatted(enum logcode code,
 				b = stats.total_read -
 					initial_stats->total_read;
 			}
-			snprintf(buf2,sizeof(buf2),"%.0f", (double)b);
+			strlcat(fmt, ".0f", sizeof fmt);
+			snprintf(buf2, sizeof buf2, fmt, (double)b);
 			n = buf2;
 			break;
 		case 'c':
@@ -416,62 +463,165 @@ static void log_formatted(enum logcode code,
 				b = stats.total_read -
 					initial_stats->total_read;
 			}
-			snprintf(buf2,sizeof(buf2),"%.0f", (double)b);
+			strlcat(fmt, ".0f", sizeof fmt);
+			snprintf(buf2, sizeof buf2, fmt, (double)b);
 			n = buf2;
 			break;
+		case 'i':
+			if (iflags & ITEM_DELETED) {
+				n = "*deleting";
+				break;
+			}
+			n = buf2 + MAXPATHLEN - 32;
+			n[0] = iflags & ITEM_LOCAL_CHANGE
+			      ? iflags & ITEM_XNAME_FOLLOWS ? 'h' : 'c'
+			     : !(iflags & ITEM_TRANSFER) ? '.'
+			     : !local_server && *op == 's' ? '<' : '>';
+			n[1] = S_ISDIR(file->mode) ? 'd'
+			     : IS_DEVICE(file->mode) ? 'D'
+			     : S_ISLNK(file->mode) ? 'L' : 'f';
+			n[2] = !(iflags & ITEM_REPORT_CHECKSUM) ? '.' : 'c';
+			n[3] = !(iflags & ITEM_REPORT_SIZE) ? '.' : 's';
+			n[4] = !(iflags & ITEM_REPORT_TIME) ? '.'
+			     : !preserve_times || IS_DEVICE(file->mode)
+					       || S_ISLNK(file->mode) ? 'T' : 't';
+			n[5] = !(iflags & ITEM_REPORT_PERMS) ? '.' : 'p';
+			n[6] = !(iflags & ITEM_REPORT_OWNER) ? '.' : 'o';
+			n[7] = !(iflags & ITEM_REPORT_GROUP) ? '.' : 'g';
+			n[8] = !(iflags & ITEM_REPORT_XATTRS) ? '.' : 'a';
+			n[9] = '\0';
+
+			if (iflags & (ITEM_IS_NEW|ITEM_MISSING_DATA)) {
+				char ch = iflags & ITEM_IS_NEW ? '+' : '?';
+				int i;
+				for (i = 2; n[i]; i++)
+					n[i] = ch;
+			} else if (!(iflags & (ITEM_TRANSFER|ITEM_LOCAL_CHANGE))) {
+				int i;
+				for (i = 2; n[i]; i++) {
+					if (n[i] != '.')
+						break;
+				}
+				if (!n[i]) {
+					for (i = 2; n[i]; i++)
+						n[i] = ' ';
+				}
+			}
+			break;
 		}
 
-		/* n is the string to be inserted in place of this %
-		 * code; l is its length not including the trailing
-		 * NUL */
+		/* "n" is the string to be inserted in place of this % code. */
 		if (!n)
 			continue;
+		if (n != buf2 && fmt[1]) {
+			strlcat(fmt, "s", sizeof fmt);
+			snprintf(buf2, sizeof buf2, fmt, n);
+			n = buf2;
+		}
+		len = strlen(n);
 
-		l = strlen(n);
+		/* Subtract the length of the escape from the string's size. */
+		total -= p - s + 1;
 
-		if (l + ((int)(s - &buf[0])) >= sizeof(buf)) {
-			rprintf(FERROR,"buffer overflow expanding %%%c - exiting\n",
+		if (len + total >= (size_t)sizeof buf) {
+			rprintf(FERROR,
+				"buffer overflow expanding %%%c -- exiting\n",
 				p[0]);
 			exit_cleanup(RERR_MESSAGEIO);
 		}
 
 		/* Shuffle the rest of the string along to make space for n */
-		if (l != 2) {
-			memmove(s+(l-1), s+1, strlen(s+1)+1);
-		}
+		if (len != (size_t)(p - s + 1))
+			memmove(s + len, p + 1, total - (s - buf) + 1);
+		total += len;
 
-		/* Copy in n but NOT its nul, because the format sting
-		 * probably continues after this. */
-		memcpy(p, n, l);
+		/* Insert the contents of string "n", but NOT its null. */
+		if (len)
+			memcpy(s, n, len);
 
 		/* Skip over inserted string; continue looking */
-		s = p+l;
+		p = s + len;
 	}
 
-	rprintf(code,"%s\n", buf);
+	rwrite(code, buf, total);
 }
 
-/* log the outgoing transfer of a file */
-void log_send(struct file_struct *file, struct stats *initial_stats)
+/* Return 1 if the format escape is in the log-format string (e.g. look for
+ * the 'b' in the "%9b" format escape). */
+int log_format_has(const char *format, char esc)
 {
-	if (lp_transfer_logging(module_id)) {
-		log_formatted(FLOG, lp_log_format(module_id), "send", file, initial_stats);
-	} else if (log_format && !am_server) {
-		log_formatted(FINFO, log_format, "send", file, initial_stats);
+	const char *p;
+
+	if (!format)
+		return 0;
+
+	for (p = format; (p = strchr(p, '%')) != NULL; ) {
+		if (*++p == '-')
+			p++;
+		while (isdigit(*(uchar*)p))
+			p++;
+		if (!*p)
+			break;
+		if (*p == esc)
+			return 1;
 	}
+	return 0;
 }
 
-/* log the incoming transfer of a file */
-void log_recv(struct file_struct *file, struct stats *initial_stats)
+/* log the transfer of a file */
+void log_item(struct file_struct *file, struct stats *initial_stats,
+	      int iflags, char *hlink)
 {
+	char *s_or_r = am_sender ? "send" : "recv";
+
 	if (lp_transfer_logging(module_id)) {
-		log_formatted(FLOG, lp_log_format(module_id), "recv", file, initial_stats);
+		log_formatted(FLOG, lp_log_format(module_id), s_or_r,
+			      file, initial_stats, iflags, hlink);
 	} else if (log_format && !am_server) {
-		log_formatted(FINFO, log_format, "recv", file, initial_stats);
+		log_formatted(FINFO, log_format, s_or_r,
+			      file, initial_stats, iflags, hlink);
 	}
 }
 
+void maybe_log_item(struct file_struct *file, int iflags, int itemizing,
+		    char *buf)
+{
+	int see_item = itemizing && (iflags || verbose > 1);
+	if (am_server) {
+		if (am_daemon && !dry_run && see_item)
+			log_item(file, &stats, iflags, buf);
+	} else if (see_item || iflags & ITEM_LOCAL_CHANGE || *buf
+	    || (S_ISDIR(file->mode) && iflags & SIGNIFICANT_ITEM_FLAGS))
+		log_item(file, &stats, iflags, buf);
+}
 
+void log_delete(char *fname, int mode)
+{
+	static struct file_struct file;
+	int len = strlen(fname);
+	char *fmt;
+
+	file.mode = mode;
+	file.basename = fname;
+
+	if (!verbose && !log_format)
+		;
+	else if (am_server && protocol_version >= 29 && len < MAXPATHLEN) {
+		if (S_ISDIR(mode))
+			len++; /* directories include trailing null */
+		send_msg(MSG_DELETED, fname, len);
+	} else {
+		fmt = log_format_has_o_or_i ? log_format : "deleting %n";
+		log_formatted(FCLIENT, fmt, "del.", &file, &stats,
+			      ITEM_DELETED, NULL);
+	}
+
+	if (!am_daemon || dry_run || !lp_transfer_logging(module_id))
+		return;
+
+	fmt = daemon_log_format_has_o_or_i ? lp_log_format(module_id) : "deleting %n";
+	log_formatted(FLOG, fmt, "del.", &file, &stats, ITEM_DELETED, NULL);
+}
 
 
 /*
@@ -483,7 +633,7 @@ void log_recv(struct file_struct *file, struct stats *initial_stats)
 void log_exit(int code, const char *file, int line)
 {
 	if (code == 0) {
-		rprintf(FLOG,"wrote %.0f bytes  read %.0f bytes  total size %.0f\n",
+		rprintf(FLOG,"sent %.0f bytes  received %.0f bytes  total size %.0f\n",
 			(double)stats.total_written,
 			(double)stats.total_read,
 			(double)stats.total_size);

match.c

@@ -22,11 +22,14 @@
 extern int verbose;
 extern int am_server;
 extern int do_progress;
+extern int checksum_seed;
+
+int updating_basis_file;
 
 typedef unsigned short tag;
 
 #define TABLESIZE (1<<16)
-#define NULL_TAG ((size_t)-1)
+#define NULL_TAG (-1)
 
 static int false_alarms;
 static int tag_hits;
@@ -41,12 +44,12 @@ extern struct stats stats;
 
 struct target {
 	tag t;
-	size_t i;
+	int32 i;
 };
 
 static struct target *targets;
 
-static size_t *tag_table;
+static int32 *tag_table;
 
 #define gettag2(s1,s2) (((s1) + (s2)) & 0xFFFF)
 #define gettag(sum) gettag2((sum)&0xFFFF,(sum)>>16)
@@ -59,10 +62,10 @@ static int compare_targets(struct target *t1,struct target *t2)
 
 static void build_hash_table(struct sum_struct *s)
 {
-	size_t i;
+	int32 i;
 
 	if (!tag_table)
-		tag_table = new_array(size_t, TABLESIZE);
+		tag_table = new_array(int32, TABLESIZE);
 
 	targets = new_array(struct target, s->count);
 	if (!tag_table || !targets)
@@ -98,17 +101,20 @@ static OFF_T last_match;
  * @param i If >0, the number of a matched token.  If 0, indicates we
  * have only literal data.
  **/
-static void matched(int f,struct sum_struct *s,struct map_struct *buf,
-		    OFF_T offset,int i)
+static void matched(int f, struct sum_struct *s, struct map_struct *buf,
+		    OFF_T offset, int32 i)
 {
-	OFF_T n = offset - last_match;
-	OFF_T j;
+	int32 n = offset - last_match; /* max value: block_size (int32) */
+	int32 j;
 
-	if (verbose > 2 && i >= 0)
-		rprintf(FINFO,"match at %.0f last_match=%.0f j=%d len=%u n=%.0f\n",
-			(double)offset,(double)last_match,i,s->sums[i].len,(double)n);
+	if (verbose > 2 && i >= 0) {
+		rprintf(FINFO,
+			"match at %.0f last_match=%.0f j=%d len=%ld n=%ld\n",
+			(double)offset, (double)last_match, i,
+			(long)s->sums[i].len, (long)n);
+	}
 
-	send_token(f,i,buf,last_match,n,i<0?0:s->sums[i].len);
+	send_token(f, i, buf, last_match, n, i < 0 ? 0 : s->sums[i].len);
 	data_transfer += n;
 
 	if (i >= 0) {
@@ -117,8 +123,8 @@ static void matched(int f,struct sum_struct *s,struct map_struct *buf,
 	}
 
 	for (j = 0; j < n; j += CHUNK_SIZE) {
-		int n1 = MIN(CHUNK_SIZE,n-j);
-		sum_update(map_ptr(buf,last_match+j,n1),n1);
+		int32 n1 = MIN(CHUNK_SIZE, n - j);
+		sum_update(map_ptr(buf, last_match + j, n1), n1);
 	}
 
 
@@ -127,35 +133,31 @@ static void matched(int f,struct sum_struct *s,struct map_struct *buf,
 	else
 		last_match = offset;
 
-	if (buf && do_progress) {
+	if (buf && do_progress)
 		show_progress(last_match, buf->file_size);
-
-		if (i == -1)
-			end_progress(buf->file_size);
-	}
 }
 
 
 static void hash_search(int f,struct sum_struct *s,
 			struct map_struct *buf, OFF_T len)
 {
-	OFF_T offset, end;
-	unsigned int k;
-	size_t last_i;
+	OFF_T offset, end, backup;
+	int32 k, want_i;
 	char sum2[SUM_LENGTH];
 	uint32 s1, s2, sum;
+	int more;
 	schar *map;
 
-	/* last_i is used to encourage adjacent matches, allowing the RLL coding of the
-	   output to work more efficiently */
-	last_i = (size_t)-1;
+	/* want_i is used to encourage adjacent matches, allowing the RLL
+	 * coding of the output to work more efficiently. */
+	want_i = 0;
 
 	if (verbose > 2) {
-		rprintf(FINFO,"hash search b=%u len=%.0f\n",
-			s->blength, (double)len);
+		rprintf(FINFO, "hash search b=%ld len=%.0f\n",
+			(long)s->blength, (double)len);
 	}
 
-	k = MIN(len, s->blength);
+	k = (int32)MIN(len, (OFF_T)s->blength);
 
 	map = (schar *)map_ptr(buf, 0, k);
 
@@ -163,21 +165,21 @@ static void hash_search(int f,struct sum_struct *s,
 	s1 = sum & 0xFFFF;
 	s2 = sum >> 16;
 	if (verbose > 3)
-		rprintf(FINFO, "sum=%.8x k=%u\n", sum, k);
+		rprintf(FINFO, "sum=%.8x k=%ld\n", sum, (long)k);
 
 	offset = 0;
 
 	end = len + 1 - s->sums[s->count-1].len;
 
 	if (verbose > 3) {
-		rprintf(FINFO, "hash search s->blength=%u len=%.0f count=%.0f\n",
-			s->blength, (double)len, (double)s->count);
+		rprintf(FINFO, "hash search s->blength=%ld len=%.0f count=%.0f\n",
+			(long)s->blength, (double)len, (double)s->count);
 	}
 
 	do {
 		tag t = gettag2(s1,s2);
 		int done_csum2 = 0;
-		size_t j = tag_table[t];
+		int32 j = tag_table[t];
 
 		if (verbose > 4)
 			rprintf(FINFO,"offset=%.0f sum=%08x\n",(double)offset,sum);
@@ -187,18 +189,23 @@ static void hash_search(int f,struct sum_struct *s,
 
 		sum = (s1 & 0xffff) | (s2 << 16);
 		tag_hits++;
-		for (; j < s->count && targets[j].t == t; j++) {
-			unsigned int l;
-			size_t i = targets[j].i;
+		do {
+			int32 l, i = targets[j].i;
 
 			if (sum != s->sums[i].sum1)
 				continue;
 
 			/* also make sure the two blocks are the same length */
-			l = MIN((OFF_T)s->blength, len-offset);
+			l = (int32)MIN((OFF_T)s->blength, len-offset);
 			if (l != s->sums[i].len)
 				continue;
 
+			/* in-place: ensure chunk's offset is either >= our
+			 * offset or that the data didn't move. */
+			if (updating_basis_file && s->sums[i].offset < offset
+			    && !(s->sums[i].flags & SUMFLG_SAME_OFFSET))
+				continue;
+
 			if (verbose > 3)
 				rprintf(FINFO,"potential match at %.0f target=%.0f %.0f sum=%08x\n",
 					(double)offset,(double)j,(double)i,sum);
@@ -214,44 +221,70 @@ static void hash_search(int f,struct sum_struct *s,
 				continue;
 			}
 
-			/* we've found a match, but now check to see
-			 * if last_i can hint at a better match */
-			for (j++; j < s->count && targets[j].t == t; j++) {
-				size_t i2 = targets[j].i;
-				if (i2 == last_i + 1) {
-					if (sum != s->sums[i2].sum1)
-						break;
-					if (memcmp(sum2,s->sums[i2].sum2,s->s2length) != 0)
-						break;
-					/* we've found an adjacent match - the RLL coder
-					 * will be happy */
-					i = i2;
-					break;
-				}
+			/* When updating in-place, the best possible match is
+			 * one with an identical offset, so we prefer that over
+			 * the following want_i optimization. */
+			if (updating_basis_file) {
+				do {
+					int32 i2 = targets[j].i;
+					if (s->sums[i2].offset != offset)
+						continue;
+					if (i2 != i) {
+						if (sum != s->sums[i2].sum1)
+							break;
+						if (memcmp(sum2, s->sums[i2].sum2,
+							   s->s2length) != 0)
+							break;
+						i = i2;
+					}
+					/* This chunk was at the same offset on
+					 * both the sender and the receiver. */
+					s->sums[i].flags |= SUMFLG_SAME_OFFSET;
+					goto set_want_i;
+				} while (++j < s->count && targets[j].t == t);
 			}
 
-			last_i = i;
+			/* we've found a match, but now check to see
+			 * if want_i can hint at a better match. */
+			if (i != want_i && want_i < s->count
+			    && (!updating_basis_file || s->sums[want_i].offset >= offset
+			     || s->sums[want_i].flags & SUMFLG_SAME_OFFSET)
+			    && sum == s->sums[want_i].sum1
+			    && memcmp(sum2, s->sums[want_i].sum2, s->s2length) == 0) {
+				/* we've found an adjacent match - the RLL coder
+				 * will be happy */
+				i = want_i;
+			}
+		    set_want_i:
+			want_i = i + 1;
 
 			matched(f,s,buf,offset,i);
 			offset += s->sums[i].len - 1;
-			k = MIN(s->blength, len-offset);
+			k = (int32)MIN((OFF_T)s->blength, len-offset);
 			map = (schar *)map_ptr(buf, offset, k);
 			sum = get_checksum1((char *)map, k);
 			s1 = sum & 0xFFFF;
 			s2 = sum >> 16;
 			matches++;
 			break;
-		}
+		} while (++j < s->count && targets[j].t == t);
 
 	null_tag:
+		backup = offset - last_match;
+		/* We sometimes read 1 byte prior to last_match... */
+		if (backup < 0)
+			backup = 0;
+
 		/* Trim off the first byte from the checksum */
-		map = (schar *)map_ptr(buf, offset, k+1);
+		more = offset + k < len;
+		map = (schar *)map_ptr(buf, offset - backup, k + more + backup)
+		    + backup;
 		s1 -= map[0] + CHAR_OFFSET;
 		s2 -= k * (map[0]+CHAR_OFFSET);
 
 		/* Add on the next byte (if there is one) to the checksum */
-		if (k < (len-offset)) {
-			s1 += (map[k]+CHAR_OFFSET);
+		if (more) {
+			s1 += map[k] + CHAR_OFFSET;
 			s2 += s1;
 		} else
 			--k;
@@ -262,15 +295,12 @@ static void hash_search(int f,struct sum_struct *s,
 		   match. The 3 reads are caused by the
 		   running match, the checksum update and the
 		   literal send. */
-		if (offset > last_match
-		 && offset-last_match >= CHUNK_SIZE+s->blength
-		 && end-offset > CHUNK_SIZE) {
-			matched(f,s,buf,offset - s->blength, -2);
-		}
+		if (backup >= s->blength+CHUNK_SIZE && end-offset > CHUNK_SIZE)
+			matched(f, s, buf, offset - s->blength, -2);
 	} while (++offset < end);
 
-	matched(f,s,buf,len,-1);
-	map_ptr(buf,len-1,1);
+	matched(f, s, buf, len, -1);
+	map_ptr(buf, len-1, 1);
 }
 
 
@@ -291,7 +321,6 @@ static void hash_search(int f,struct sum_struct *s,
 void match_sums(int f, struct sum_struct *s, struct map_struct *buf, OFF_T len)
 {
 	char file_sum[MD4_SUM_LENGTH];
-	extern int write_batch;
 
 	last_match = 0;
 	false_alarms = 0;
@@ -299,9 +328,9 @@ void match_sums(int f, struct sum_struct *s, struct map_struct *buf, OFF_T len)
 	matches = 0;
 	data_transfer = 0;
 
-	sum_init();
+	sum_init(checksum_seed);
 
-	if (len > 0 && s->count>0) {
+	if (len > 0 && s->count > 0) {
 		build_hash_table(s);
 
 		if (verbose > 2)
@@ -314,20 +343,19 @@ void match_sums(int f, struct sum_struct *s, struct map_struct *buf, OFF_T len)
 	} else {
 		OFF_T j;
 		/* by doing this in pieces we avoid too many seeks */
-		for (j = 0; j < len-CHUNK_SIZE; j += CHUNK_SIZE) {
-			int n1 = MIN(CHUNK_SIZE,(len-CHUNK_SIZE)-j);
-			matched(f,s,buf,j+n1,-2);
-		}
-		matched(f,s,buf,len,-1);
+		for (j = CHUNK_SIZE; j < len; j += CHUNK_SIZE)
+			matched(f, s, buf, j, -2);
+		matched(f, s, buf, len, -1);
 	}
 
 	sum_end(file_sum);
+	/* If we had a read error, send a bad checksum. */
+	if (buf && buf->status != 0)
+		file_sum[0]++;
 
 	if (verbose > 2)
 		rprintf(FINFO,"sending file_sum\n");
 	write_buf(f,file_sum,MD4_SUM_LENGTH);
-	if (write_batch)
-		write_batch_delta_file(file_sum, MD4_SUM_LENGTH);
 
 	if (targets) {
 		free(targets);

mkproto.awk

@@ -58,7 +58,7 @@ BEGIN {
   next;
 }
 
-!/^OFF_T|^size_t|^off_t|^pid_t|^unsigned|^mode_t|^DIR|^user|^int|^char|^uint|^struct|^BOOL|^void|^time|^const/ {
+!/^OFF_T|^size_t|^off_t|^pid_t|^unsigned|^mode_t|^DIR|^user|^int|^char|^uint|^uchar|^short|^struct|^BOOL|^void|^time|^const/ {
   next;
 }
 

packaging/lsb/rsync.spec

@@ -1,24 +1,46 @@
-Summary: Program for efficient remote updates of files.
+Summary: A program for synchronizing files over a network.
 Name: rsync
-Version: 2.6.2
+Version: 2.6.4
 Release: 1
-Copyright: GPL
-Group: Applications/Networking
-Source:	ftp://samba.anu.edu.au/pub/rsync/rsync-%{version}.tar.gz
-URL: http://samba.anu.edu.au/rsync/
-Packager: Andrew Tridgell <tridge@samba.anu.edu.au>
-BuildRoot: /tmp/rsync
+Group: Applications/Internet
+Source:	ftp://rsync.samba.org/pub/rsync/rsync-%{version}.tar.gz
+URL: http://rsync.samba.org/
+
+Prefix: %{_prefix}
+BuildRoot: /var/tmp/%{name}-root
+License: GPL
 
 %description
-rsync is a replacement for rcp that has many more features.
+Rsync uses a reliable algorithm to bring remote and host files into
+sync very quickly. Rsync is fast because it just sends the differences
+in the files over the network instead of sending the complete
+files. Rsync is often used as a very powerful mirroring process or
+just as a more capable replacement for the rcp command. A technical
+report which describes the rsync algorithm is included in this
+package.
 
-rsync uses the "rsync algorithm" which provides a very fast method for
-bringing remote files into sync. It does this by sending just the
-differences in the files across the link, without requiring that both
-sets of files are present at one of the ends of the link beforehand.
+%prep
+%setup -q
 
-A technical report describing the rsync algorithm is included with
-this package. 
+%build
+%configure
+
+make
+
+%install
+rm -rf $RPM_BUILD_ROOT
+
+%makeinstall
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root)
+%doc COPYING README tech_report.tex
+%{_prefix}/bin/rsync
+%{_mandir}/man1/rsync.1*
+%{_mandir}/man5/rsyncd.conf.5*
 
 %changelog
 * Thu Jan 30 2003 Horst von Brand <vonbrand@inf.utfsm.cl>
@@ -64,30 +86,3 @@ to '%build', removed '%prefix'.
 
 rsync-1.6.2-1 packaged.  (This entry by jam to credit Michael for the
 previous package(s).)
-
-%prep
-%setup
-
-%build
-./configure --prefix=/usr --mandir=%{_mandir}
-make CFLAGS="$RPM_OPT_FLAGS"
-strip rsync
-
-%install
-mkdir -p $RPM_BUILD_ROOT/usr/bin
-mkdir -p $RPM_BUILD_ROOT/%{_mandir}/man{1,5}
-install -m755 rsync $RPM_BUILD_ROOT/usr/bin
-install -m644 rsync.1 $RPM_BUILD_ROOT/%{_mandir}/man1
-install -m644 rsyncd.conf.5 $RPM_BUILD_ROOT/%{_mandir}/man5
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%files
-%attr(-,root,root) /usr/bin/rsync
-%attr(-,root,root) %{_mandir}/man1/rsync.1*
-%attr(-,root,root) %{_mandir}/man5/rsyncd.conf.5*
-%attr(-,root,root) %doc tech_report.tex
-%attr(-,root,root) %doc README
-%attr(-,root,root) %doc COPYING
-%attr(-,root,root) %doc doc/README-SGML doc/rsync.sgml

params.c

@@ -491,8 +491,8 @@ static FILE *OpenConfFile( char *FileName )
   OpenedFile = fopen( FileName, "r" );
   if( NULL == OpenedFile )
     {
-    rprintf(FERROR,"rsync: unable to open configuration file \"%s\": %s\n",
-	    FileName, strerror(errno));
+    rsyserr(FERROR, errno, "rsync: unable to open configuration file \"%s\"",
+	    safe_fname(FileName));
     }
 
   return( OpenedFile );

pipe.c

@@ -1,19 +1,19 @@
 /*  -*- c-file-style: "linux" -*-
- * 
- * Copyright (C) 1996-2000 by Andrew Tridgell 
+ *
+ * Copyright (C) 1996-2000 by Andrew Tridgell
  * Copyright (C) Paul Mackerras 1996
  * Copyright (C) 2001, 2002 by Martin Pool <mbp@samba.org>
- * 
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- * 
+ *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- * 
+ *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
@@ -25,14 +25,14 @@ extern int am_sender;
 extern int am_server;
 extern int blocking_io;
 extern int orig_umask;
-extern int read_batch;
+extern int write_batch;
 extern int filesfrom_fd;
 
 /**
  * Create a child connected to use on stdin/stdout.
  *
- * This is derived from CVS code 
- * 
+ * This is derived from CVS code
+ *
  * Note that in the child STDIN is set to blocking and STDOUT
  * is set to non-blocking. This is necessary as rsh relies on stdin being blocking
  *  and ssh relies on stdout being non-blocking
@@ -46,20 +46,19 @@ pid_t piped_child(char **command, int *f_in, int *f_out)
 	pid_t pid;
 	int to_child_pipe[2];
 	int from_child_pipe[2];
-	
+
 	if (verbose >= 2) {
 		print_child_argv(command);
 	}
 
 	if (fd_pair(to_child_pipe) < 0 || fd_pair(from_child_pipe) < 0) {
-		rprintf(FERROR, "pipe: %s\n", strerror(errno));
+		rsyserr(FERROR, errno, "pipe");
 		exit_cleanup(RERR_IPC);
 	}
 
-
 	pid = do_fork();
 	if (pid == -1) {
-		rprintf(FERROR, "fork: %s\n", strerror(errno));
+		rsyserr(FERROR, errno, "fork");
 		exit_cleanup(RERR_IPC);
 	}
 
@@ -68,8 +67,7 @@ pid_t piped_child(char **command, int *f_in, int *f_out)
 		    close(to_child_pipe[1]) < 0 ||
 		    close(from_child_pipe[0]) < 0 ||
 		    dup2(from_child_pipe[1], STDOUT_FILENO) < 0) {
-			rprintf(FERROR, "Failed to dup/close : %s\n",
-				strerror(errno));
+			rsyserr(FERROR, errno, "Failed to dup/close");
 			exit_cleanup(RERR_IPC);
 		}
 		if (to_child_pipe[0] != STDIN_FILENO)
@@ -81,13 +79,13 @@ pid_t piped_child(char **command, int *f_in, int *f_out)
 		if (blocking_io > 0)
 			set_blocking(STDOUT_FILENO);
 		execvp(command[0], command);
-		rprintf(FERROR, "Failed to exec %s : %s\n",
-			command[0], strerror(errno));
+		rsyserr(FERROR, errno, "Failed to exec %s",
+			safe_fname(command[0]));
 		exit_cleanup(RERR_IPC);
 	}
 
 	if (close(from_child_pipe[1]) < 0 || close(to_child_pipe[0]) < 0) {
-		rprintf(FERROR, "Failed to close : %s\n", strerror(errno));
+		rsyserr(FERROR, errno, "Failed to close");
 		exit_cleanup(RERR_IPC);
 	}
 
@@ -97,7 +95,17 @@ pid_t piped_child(char **command, int *f_in, int *f_out)
 	return pid;
 }
 
-pid_t local_child(int argc, char **argv,int *f_in,int *f_out,
+/* This function forks a child which calls child_main().  First,
+ * however, it has to establish communication paths to and from the
+ * newborn child.  It creates two socket pairs -- one for writing to
+ * the child (from the parent) and one for reading from the child
+ * (writing to the parent).  Since that's four socket ends, each
+ * process has to close the two ends it doesn't need.  The remaining
+ * two socket ends are retained for reading and writing.  In the
+ * child, the STDIN and STDOUT file descriptors refer to these
+ * sockets.  In the parent, the function arguments f_in and f_out are
+ * set to refer to these sockets. */
+pid_t local_child(int argc, char **argv, int *f_in, int *f_out,
 		  int (*child_main)(int, char*[]))
 {
 	pid_t pid;
@@ -106,20 +114,23 @@ pid_t local_child(int argc, char **argv,int *f_in,int *f_out,
 
 	if (fd_pair(to_child_pipe) < 0 ||
 	    fd_pair(from_child_pipe) < 0) {
-		rprintf(FERROR,"pipe: %s\n",strerror(errno));
+		rsyserr(FERROR, errno, "pipe");
 		exit_cleanup(RERR_IPC);
 	}
 
-
 	pid = do_fork();
 	if (pid == -1) {
-		rprintf(FERROR,"fork: %s\n",strerror(errno));
+		rsyserr(FERROR, errno, "fork");
 		exit_cleanup(RERR_IPC);
 	}
 
 	if (pid == 0) {
-		am_sender = read_batch ? 0 : !am_sender;
-		am_server = 1;		
+		am_sender = !am_sender;
+		am_server = 1;
+
+		/* The server side never writes the batch, even if it
+		 * is local (it makes the logic easier elsewhere). */
+		write_batch = 0;
 
 		if (!am_sender)
 			filesfrom_fd = -1;
@@ -128,11 +139,13 @@ pid_t local_child(int argc, char **argv,int *f_in,int *f_out,
 		    close(to_child_pipe[1]) < 0 ||
 		    close(from_child_pipe[0]) < 0 ||
 		    dup2(from_child_pipe[1], STDOUT_FILENO) < 0) {
-			rprintf(FERROR,"Failed to dup/close : %s\n",strerror(errno));
+			rsyserr(FERROR, errno, "Failed to dup/close");
 			exit_cleanup(RERR_IPC);
 		}
-		if (to_child_pipe[0] != STDIN_FILENO) close(to_child_pipe[0]);
-		if (from_child_pipe[1] != STDOUT_FILENO) close(from_child_pipe[1]);
+		if (to_child_pipe[0] != STDIN_FILENO)
+			close(to_child_pipe[0]);
+		if (from_child_pipe[1] != STDOUT_FILENO)
+			close(from_child_pipe[1]);
 		child_main(argc, argv);
 	}
 
@@ -141,12 +154,12 @@ pid_t local_child(int argc, char **argv,int *f_in,int *f_out,
 
 	if (close(from_child_pipe[1]) < 0 ||
 	    close(to_child_pipe[0]) < 0) {
-		rprintf(FERROR,"Failed to close : %s\n",strerror(errno));   
+		rsyserr(FERROR, errno, "Failed to close");
 		exit_cleanup(RERR_IPC);
 	}
 
 	*f_in = from_child_pipe[0];
 	*f_out = to_child_pipe[1];
-  
+
 	return pid;
 }

popt/popt.c

@@ -1128,7 +1128,7 @@ const char * poptBadOption(poptContext con, int flags)
     /*@=nullderef@*/
 }
 
-const char *const poptStrerror(const int error)
+const char * poptStrerror(const int error)
 {
     switch (error) {
       case POPT_ERROR_NOARG:

popt/popt.h

@@ -373,7 +373,7 @@ int poptParseArgvString(const unsigned char * s,
  * @return		error string
  */
 /*@-redecl@*/
-/*@observer@*/ const char *const poptStrerror(const int error)
+/*@observer@*/ const char * poptStrerror(const int error)
 	/*@*/;
 /*@=redecl@*/
 

popt/popthelp.c

@@ -63,7 +63,7 @@ struct poptOption poptHelpOptions[] = {
 /**
  * @param table		option(s)
  */
-/*@observer@*/ /*@null@*/ static const char *const
+/*@observer@*/ /*@null@*/ static const char *
 getTableTranslationDomain(/*@null@*/ const struct poptOption *table)
 	/*@*/
 {
@@ -81,7 +81,7 @@ getTableTranslationDomain(/*@null@*/ const struct poptOption *table)
  * @param opt		option(s)
  * @param translation_domain	translation domain
  */
-/*@observer@*/ /*@null@*/ static const char *const
+/*@observer@*/ /*@null@*/ static const char *
 getArgDescrip(const struct poptOption * opt,
 		/*@-paramuse@*/		/* FIX: wazzup? */
 		/*@null@*/ UNUSED(const char * translation_domain))

progress.c

@@ -26,6 +26,12 @@ extern int am_server;
 
 #define PROGRESS_HISTORY_SECS 5
 
+#ifdef GETPGRP_VOID
+#define GETPGRP_ARG
+#else
+#define GETPGRP_ARG 0
+#endif
+
 struct progress_history {
 	struct timeval time;
 	OFF_T ofs;
@@ -61,17 +67,18 @@ static void rprint_progress(OFF_T ofs, OFF_T size, struct timeval *now,
 
 	if (is_last) {
 		/* Compute stats based on the starting info. */
-		diff = msdiff(&ph_start.time, now);
-		if (!diff)
+		if (!ph_start.time.tv_sec
+		    || !(diff = msdiff(&ph_start.time, now)))
 			diff = 1;
 		rate = (double) (ofs - ph_start.ofs) * 1000.0 / diff / 1024.0;
 		/* Switch to total time taken for our last update. */
 		remain = (double) diff / 1000.0;
 	} else {
 		/* Compute stats based on recent progress. */
-		diff = msdiff(&ph_list[oldest_hpos].time, now);
-		rate = diff ? (double) (ofs - ph_list[oldest_hpos].ofs) * 1000.0
-		    / diff / 1024.0 : 0;
+		if (!(diff = msdiff(&ph_list[oldest_hpos].time, now)))
+			diff = 1;
+		rate = (double) (ofs - ph_list[oldest_hpos].ofs) * 1000.0
+		     / diff / 1024.0;
 		remain = rate ? (double) (size - ofs) / rate / 1000.0 : 0.0;
 	}
 
@@ -115,10 +122,19 @@ void end_progress(OFF_T size)
 void show_progress(OFF_T ofs, OFF_T size)
 {
 	struct timeval now;
+#if defined HAVE_GETPGRP && defined HAVE_TCGETPGRP
+	static pid_t pgrp = -1;
+	pid_t tc_pgrp;
+#endif
 
 	if (am_server)
 		return;
 
+#if defined HAVE_GETPGRP && defined HAVE_TCGETPGRP
+	if (pgrp == -1)
+		pgrp = getpgrp(GETPGRP_ARG);
+#endif
+
 	gettimeofday(&now, NULL);
 
 	if (!ph_start.time.tv_sec) {
@@ -150,5 +166,11 @@ void show_progress(OFF_T ofs, OFF_T size)
 		ph_list[newest_hpos].ofs = ofs;
 	}
 
+#if defined HAVE_GETPGRP && defined HAVE_TCGETPGRP
+	tc_pgrp = tcgetpgrp(STDOUT_FILENO);
+	if (tc_pgrp != pgrp && tc_pgrp != -1)
+		return;
+#endif
+
 	rprint_progress(ofs, size, &now, False);
 }

receiver.c

@@ -21,110 +21,103 @@
 #include "rsync.h"
 
 extern int verbose;
-extern int recurse;
-extern int delete_mode;
-extern int delete_after;
-extern int max_delete;
-extern int csum_length;
-extern struct stats stats;
 extern int dry_run;
+extern int am_daemon;
 extern int am_server;
+extern int do_progress;
+extern int log_before_transfer;
+extern int log_format_has_i;
+extern int daemon_log_format_has_i;
+extern int csum_length;
+extern int read_batch;
+extern int batch_gen_fd;
+extern int protocol_version;
 extern int relative_paths;
+extern int keep_dirlinks;
 extern int preserve_hard_links;
 extern int preserve_perms;
-extern int cvs_exclude;
 extern int io_error;
-extern char *tmpdir;
-extern char *compare_dest;
+extern int basis_dir_cnt;
 extern int make_backups;
-extern int do_progress;
-extern char *backup_dir;
-extern char *backup_suffix;
-extern int backup_suffix_len;
 extern int cleanup_got_literal;
+extern int remove_sent_files;
 extern int module_id;
 extern int ignore_errors;
 extern int orig_umask;
+extern int keep_partial;
+extern int checksum_seed;
+extern int inplace;
+extern int delay_updates;
+extern struct stats stats;
+extern char *log_format;
+extern char *tmpdir;
+extern char *partial_dir;
+extern char *basis_dir[];
+extern struct file_list *the_file_list;
+extern struct filter_list_struct server_filter_list;
 
-static void delete_one(char *fn, int is_dir)
+#define SLOT_SIZE	(16*1024)	/* Desired size in bytes */
+#define PER_SLOT_BITS	(SLOT_SIZE * 8) /* Number of bits per slot */
+#define PER_SLOT_INTS	(SLOT_SIZE / 4) /* Number of int32s per slot */
+
+static uint32 **delayed_bits = NULL;
+static int delayed_slot_cnt = 0;
+static int phase = 0;
+
+static void init_delayed_bits(int max_ndx)
 {
-	if (!is_dir) {
-		if (robust_unlink(fn) != 0) {
-			rprintf(FERROR, "delete_one: unlink %s failed: %s\n",
-				full_fname(fn), strerror(errno));
-		} else if (verbose) {
-			rprintf(FINFO, "deleting %s\n", fn);
-		}
-	} else {
-		if (do_rmdir(fn) != 0) {
-			if (errno != ENOTEMPTY && errno != EEXIST) {
-				rprintf(FERROR, "delete_one: rmdir %s failed: %s\n",
-					full_fname(fn), strerror(errno));
-			}
-		} else if (verbose) {
-			rprintf(FINFO, "deleting directory %s\n", fn);
-		}
-	}
+	delayed_slot_cnt = (max_ndx + PER_SLOT_BITS - 1) / PER_SLOT_BITS;
+
+	if (!(delayed_bits = (uint32**)calloc(delayed_slot_cnt, sizeof (uint32*))))
+		out_of_memory("set_delayed_bit");
 }
 
-
-static int is_backup_file(char *fn)
+static void set_delayed_bit(int ndx)
 {
-	int k = strlen(fn) - backup_suffix_len;
-	return k > 0 && strcmp(fn+k, backup_suffix) == 0;
-}
+	int slot = ndx / PER_SLOT_BITS;
+	ndx %= PER_SLOT_BITS;
 
-
-/* This deletes any files on the receiving side that are not present
- * on the sending side. */
-void delete_files(struct file_list *flist)
-{
-	struct file_list *local_file_list;
-	int i, j;
-	char *argv[1], fbuf[MAXPATHLEN];
-	static int deletion_count;
-
-	if (cvs_exclude)
-		add_cvs_excludes();
-
-	if (io_error && !(lp_ignore_errors(module_id) || ignore_errors)) {
-		rprintf(FINFO,"IO error encountered - skipping file deletion\n");
-		return;
+	if (!delayed_bits[slot]) {
+		if (!(delayed_bits[slot] = (uint32*)calloc(PER_SLOT_INTS, 4)))
+			out_of_memory("set_delayed_bit");
 	}
 
-	for (j = 0; j < flist->count; j++) {
-		if (!(flist->files[j]->flags & FLAG_TOP_DIR)
-		    || !S_ISDIR(flist->files[j]->mode))
+	delayed_bits[slot][ndx/32] |= 1u << (ndx % 32);
+}
+
+/* Call this with -1 to start checking from 0.  Returns -1 at the end. */
+static int next_delayed_bit(int after)
+{
+	uint32 bits, mask;
+	int i, ndx = after + 1;
+	int slot = ndx / PER_SLOT_BITS;
+	ndx %= PER_SLOT_BITS;
+
+	mask = (1u << (ndx % 32)) - 1;
+	for (i = ndx / 32; slot < delayed_slot_cnt; slot++, i = mask = 0) {
+		if (!delayed_bits[slot])
 			continue;
-
-		argv[0] = f_name_to(flist->files[j], fbuf);
-
-		if (!(local_file_list = send_file_list(-1, 1, argv)))
-			continue;
-
-		if (verbose > 1)
-			rprintf(FINFO, "deleting in %s\n", fbuf);
-
-		for (i = local_file_list->count-1; i >= 0; i--) {
-			if (max_delete && deletion_count > max_delete)
-				break;
-			if (!local_file_list->files[i]->basename)
+		for ( ; i < PER_SLOT_INTS; i++, mask = 0) {
+			if (!(bits = delayed_bits[slot][i] & ~mask))
 				continue;
-			if (flist_find(flist,local_file_list->files[i]) < 0) {
-				char *f = f_name(local_file_list->files[i]);
-				if (make_backups && (backup_dir || !is_backup_file(f))) {
-					(void) make_backup(f);
-					if (verbose)
-						rprintf(FINFO, "deleting %s\n", f);
-				} else {
-					int mode = local_file_list->files[i]->mode;
-					delete_one(f, S_ISDIR(mode) != 0);
-				}
-				deletion_count++;
+			/* The xor magic figures out the lowest enabled bit in
+			 * bits, and the switch quickly computes log2(bit). */
+			switch (bits ^ (bits & (bits-1))) {
+#define LOG2(n) case 1u << n: return slot*PER_SLOT_BITS + i*32 + n
+			    LOG2(0);  LOG2(1);  LOG2(2);  LOG2(3);
+			    LOG2(4);  LOG2(5);  LOG2(6);  LOG2(7);
+			    LOG2(8);  LOG2(9);  LOG2(10); LOG2(11);
+			    LOG2(12); LOG2(13); LOG2(14); LOG2(15);
+			    LOG2(16); LOG2(17); LOG2(18); LOG2(19);
+			    LOG2(20); LOG2(21); LOG2(22); LOG2(23);
+			    LOG2(24); LOG2(25); LOG2(26); LOG2(27);
+			    LOG2(28); LOG2(29); LOG2(30); LOG2(31);
 			}
+			return -1; /* impossible... */
 		}
-		flist_free(local_file_list);
 	}
+
+	return -1;
 }
 
 
@@ -177,7 +170,8 @@ static int get_tmpname(char *fnametmp, char *fname)
 	maxname = MIN(MAXPATHLEN - 7 - length, NAME_MAX - 8);
 
 	if (maxname < 1) {
-		rprintf(FERROR, "temporary filename too long: %s\n", fname);
+		rprintf(FERROR, "temporary filename too long: %s\n",
+			safe_fname(fname));
 		fnametmp[0] = '\0';
 		return 0;
 	}
@@ -189,22 +183,33 @@ static int get_tmpname(char *fnametmp, char *fname)
 }
 
 
-static int receive_data(int f_in,struct map_struct *mapbuf,int fd,char *fname,
-			OFF_T total_size)
+static int receive_data(int f_in, char *fname_r, int fd_r, OFF_T size_r,
+			char *fname, int fd, OFF_T total_size)
 {
-	int i;
+	static char file_sum1[MD4_SUM_LENGTH];
+	static char file_sum2[MD4_SUM_LENGTH];
+	struct map_struct *mapbuf;
 	struct sum_struct sum;
-	unsigned int len;
+	int32 len;
 	OFF_T offset = 0;
 	OFF_T offset2;
 	char *data;
-	static char file_sum1[MD4_SUM_LENGTH];
-	static char file_sum2[MD4_SUM_LENGTH];
-	char *map=NULL;
+	int32 i;
+	char *map = NULL;
 
 	read_sum_head(f_in, &sum);
 
-	sum_init();
+	if (fd_r >= 0 && size_r > 0) {
+		int32 read_size = MAX(sum.blength * 2, 16*1024);
+		mapbuf = map_file(fd_r, size_r, read_size, sum.blength);
+		if (verbose > 2) {
+			rprintf(FINFO, "recv mapped %s of size %.0f\n",
+				safe_fname(fname_r), (double)size_r);
+		}
+	} else
+		mapbuf = NULL;
+
+	sum_init(checksum_seed);
 
 	while ((i = recv_token(f_in, &data)) != 0) {
 		if (do_progress)
@@ -219,160 +224,325 @@ static int receive_data(int f_in,struct map_struct *mapbuf,int fd,char *fname,
 			stats.literal_data += i;
 			cleanup_got_literal = 1;
 
-			sum_update(data,i);
+			sum_update(data, i);
 
-			if (fd != -1 && write_file(fd,data,i) != i) {
-				rprintf(FERROR, "write failed on %s: %s\n",
-					full_fname(fname), strerror(errno));
-				exit_cleanup(RERR_FILEIO);
-			}
+			if (fd != -1 && write_file(fd,data,i) != i)
+				goto report_write_error;
 			offset += i;
 			continue;
 		}
 
 		i = -(i+1);
-		offset2 = i*(OFF_T)sum.blength;
+		offset2 = i * (OFF_T)sum.blength;
 		len = sum.blength;
-		if (i == (int) sum.count-1 && sum.remainder != 0)
+		if (i == (int)sum.count-1 && sum.remainder != 0)
 			len = sum.remainder;
 
 		stats.matched_data += len;
 
-		if (verbose > 3)
-			rprintf(FINFO,"chunk[%d] of size %d at %.0f offset=%.0f\n",
-				i,len,(double)offset2,(double)offset);
+		if (verbose > 3) {
+			rprintf(FINFO,
+				"chunk[%d] of size %ld at %.0f offset=%.0f\n",
+				i, (long)len, (double)offset2, (double)offset);
+		}
 
 		if (mapbuf) {
 			map = map_ptr(mapbuf,offset2,len);
 
 			see_token(map, len);
-			sum_update(map,len);
+			sum_update(map, len);
 		}
 
-		if (fd != -1 && write_file(fd,map,len) != (int) len) {
-			rprintf(FERROR, "write failed on %s: %s\n",
-				full_fname(fname), strerror(errno));
-			exit_cleanup(RERR_FILEIO);
+		if (inplace) {
+			if (offset == offset2 && fd != -1) {
+				if (flush_write_file(fd) < 0)
+					goto report_write_error;
+				offset += len;
+				if (do_lseek(fd, len, SEEK_CUR) != offset) {
+					rsyserr(FERROR, errno,
+						"lseek failed on %s",
+						full_fname(fname));
+					exit_cleanup(RERR_FILEIO);
+				}
+				continue;
+			}
 		}
+		if (fd != -1 && map && write_file(fd, map, len) != (int)len)
+			goto report_write_error;
 		offset += len;
 	}
 
-	flush_write_file(fd);
+	if (flush_write_file(fd) < 0)
+		goto report_write_error;
+
+#ifdef HAVE_FTRUNCATE
+	if (inplace && fd != -1)
+		ftruncate(fd, offset);
+#endif
 
 	if (do_progress)
 		end_progress(total_size);
 
 	if (fd != -1 && offset > 0 && sparse_end(fd) != 0) {
-		rprintf(FERROR, "write failed on %s: %s\n",
-			full_fname(fname), strerror(errno));
+	    report_write_error:
+		rsyserr(FERROR, errno, "write failed on %s",
+			full_fname(fname));
 		exit_cleanup(RERR_FILEIO);
 	}
 
 	sum_end(file_sum1);
 
+	if (mapbuf)
+		unmap_file(mapbuf);
+
 	read_buf(f_in,file_sum2,MD4_SUM_LENGTH);
-	if (verbose > 2) {
+	if (verbose > 2)
 		rprintf(FINFO,"got file_sum\n");
-	}
-	if (fd != -1 && memcmp(file_sum1,file_sum2,MD4_SUM_LENGTH) != 0) {
+	if (fd != -1 && memcmp(file_sum1, file_sum2, MD4_SUM_LENGTH) != 0)
 		return 0;
-	}
 	return 1;
 }
 
 
+static void discard_receive_data(int f_in, OFF_T length)
+{
+	receive_data(f_in, NULL, -1, 0, NULL, -1, length);
+}
+
+static void handle_delayed_updates(struct file_list *flist, char *local_name)
+{
+	char *fname, *partialptr, numbuf[4];
+	int i;
+
+	for (i = -1; (i = next_delayed_bit(i)) >= 0; ) {
+		struct file_struct *file = flist->files[i];
+		fname = local_name ? local_name : f_name(file);
+		if ((partialptr = partial_dir_fname(fname)) != NULL) {
+			if (make_backups && !make_backup(fname))
+				continue;
+			if (verbose > 2) {
+				rprintf(FINFO, "renaming %s to %s\n",
+					safe_fname(partialptr),
+					safe_fname(fname));
+			}
+			if (do_rename(partialptr, fname) < 0) {
+				rsyserr(FERROR, errno,
+					"rename failed for %s (from %s)",
+					full_fname(fname),
+					safe_fname(partialptr));
+			} else {
+				if (remove_sent_files
+				    || (preserve_hard_links
+				     && file->link_u.links)) {
+					SIVAL(numbuf, 0, i);
+					send_msg(MSG_SUCCESS,numbuf,4);
+				}
+				handle_partial_dir(partialptr,
+						   PDIR_DELETE);
+			}
+		}
+	}
+}
+
+static int get_next_gen_i(int batch_gen_fd, int next_gen_i, int desired_i)
+{
+	while (next_gen_i < desired_i) {
+		if (next_gen_i >= 0) {
+			rprintf(FINFO,
+				"(No batched update for%s \"%s\")\n",
+				phase ? " resend of" : "",
+				safe_fname(f_name(the_file_list->files[next_gen_i])));
+		}
+		next_gen_i = read_int(batch_gen_fd);
+		if (next_gen_i == -1)
+			next_gen_i = the_file_list->count;
+	}
+	return next_gen_i;
+}
+
+
 /**
  * main routine for receiver process.
  *
  * Receiver process runs on the same host as the generator process. */
-int recv_files(int f_in,struct file_list *flist,char *local_name)
+int recv_files(int f_in, struct file_list *flist, char *local_name)
 {
+	int next_gen_i = -1;
 	int fd1,fd2;
 	STRUCT_STAT st;
+	int iflags, xlen;
 	char *fname, fbuf[MAXPATHLEN];
-	char template[MAXPATHLEN];
+	char xname[MAXPATHLEN];
 	char fnametmp[MAXPATHLEN];
-	char *fnamecmp;
+	char *fnamecmp, *partialptr, numbuf[4];
 	char fnamecmpbuf[MAXPATHLEN];
-	struct map_struct *mapbuf;
-	int i;
+	uchar fnamecmp_type;
 	struct file_struct *file;
-	int phase=0;
-	int recv_ok;
 	struct stats initial_stats;
+	int save_make_backups = make_backups;
+	int itemizing = am_daemon ? daemon_log_format_has_i
+		      : !am_server && log_format_has_i;
+	int max_phase = protocol_version >= 29 ? 2 : 1;
+	int i, recv_ok;
 
-	if (verbose > 2) {
+	if (verbose > 2)
 		rprintf(FINFO,"recv_files(%d) starting\n",flist->count);
-	}
 
 	if (flist->hlink_pool) {
 		pool_destroy(flist->hlink_pool);
 		flist->hlink_pool = NULL;
 	}
 
+	if (delay_updates)
+		init_delayed_bits(flist->count);
+
 	while (1) {
 		cleanup_disable();
 
 		i = read_int(f_in);
 		if (i == -1) {
-			if (phase == 0) {
-				phase++;
-				csum_length = SUM_LENGTH;
-				if (verbose > 2)
-					rprintf(FINFO,"recv_files phase=%d\n",phase);
-				send_msg(MSG_DONE, "", 0);
-				continue;
+			if (read_batch) {
+				get_next_gen_i(batch_gen_fd, next_gen_i,
+					       flist->count);
+				next_gen_i = -1;
 			}
-			break;
+			if (++phase > max_phase)
+				break;
+			csum_length = SUM_LENGTH;
+			if (verbose > 2)
+				rprintf(FINFO, "recv_files phase=%d\n", phase);
+			if (phase == 2 && delay_updates)
+				handle_delayed_updates(flist, local_name);
+			send_msg(MSG_DONE, "", 0);
+			if (keep_partial && !partial_dir)
+				make_backups = 0; /* prevents double backup */
+			continue;
 		}
 
-		if (i < 0 || i >= flist->count) {
-			rprintf(FERROR,"Invalid file index %d in recv_files (count=%d)\n",
-				i, flist->count);
-			exit_cleanup(RERR_PROTOCOL);
-		}
+		iflags = read_item_attrs(f_in, -1, i, &fnamecmp_type,
+					 xname, &xlen);
+		if (iflags == ITEM_IS_NEW) /* no-op packet */
+			continue;
 
 		file = flist->files[i];
+		fname = local_name ? local_name : f_name_to(file, fbuf);
+
+		if (verbose > 2)
+			rprintf(FINFO, "recv_files(%s)\n", safe_fname(fname));
+
+		if (!(iflags & ITEM_TRANSFER)) {
+			maybe_log_item(file, iflags, itemizing, xname);
+			continue;
+		}
+		if (phase == 2) {
+			rprintf(FERROR,
+				"got transfer request in phase 2 [%s]\n",
+				who_am_i());
+			exit_cleanup(RERR_PROTOCOL);
+		}
 
 		stats.current_file_index = i;
 		stats.num_transferred_files++;
 		stats.total_transferred_size += file->length;
 		cleanup_got_literal = 0;
 
-		if (local_name)
-			fname = local_name;
-		else
-			fname = f_name_to(file, fbuf);
+		if (server_filter_list.head
+		    && check_filter(&server_filter_list, fname, 0) < 0) {
+			rprintf(FERROR, "attempt to hack rsync failed.\n");
+			exit_cleanup(RERR_PROTOCOL);
+		}
 
-		if (dry_run) {
-			if (!am_server && verbose) {	/* log transfer */
-				rprintf(FINFO, "%s\n", fname);
-			}
+		if (dry_run) { /* log the transfer */
+			if (!am_server && log_format)
+				log_item(file, &stats, iflags, NULL);
+			if (read_batch)
+				discard_receive_data(f_in, file->length);
 			continue;
 		}
 
+		if (read_batch) {
+			next_gen_i = get_next_gen_i(batch_gen_fd, next_gen_i, i);
+			if (i < next_gen_i) {
+				rprintf(FINFO, "(Skipping batched update for \"%s\")\n",
+					safe_fname(fname));
+				discard_receive_data(f_in, file->length);
+				continue;
+			}
+			next_gen_i = -1;
+		}
+
+		partialptr = partial_dir ? partial_dir_fname(fname) : fname;
+
+		if (protocol_version >= 29) {
+			switch (fnamecmp_type) {
+			case FNAMECMP_FNAME:
+				fnamecmp = fname;
+				break;
+			case FNAMECMP_PARTIAL_DIR:
+				fnamecmp = partialptr;
+				break;
+			case FNAMECMP_BACKUP:
+				fnamecmp = get_backup_name(fname);
+				break;
+			case FNAMECMP_FUZZY:
+				if (file->dirname) {
+					pathjoin(fnamecmpbuf, MAXPATHLEN,
+						 file->dirname, xname);
+					fnamecmp = fnamecmpbuf;
+				} else
+					fnamecmp = xname;
+				break;
+			default:
+				if (fnamecmp_type >= basis_dir_cnt) {
+					rprintf(FERROR,
+						"invalid basis_dir index: %d.\n",
+						fnamecmp_type);
+					exit_cleanup(RERR_PROTOCOL);
+				}
+				pathjoin(fnamecmpbuf, sizeof fnamecmpbuf,
+					 basis_dir[fnamecmp_type], fname);
+				fnamecmp = fnamecmpbuf;
+				break;
+			}
+			if (!fnamecmp || (server_filter_list.head
+			  && check_filter(&server_filter_list, fname, 0) < 0))
+				fnamecmp = fname;
+		} else {
+			/* Reminder: --inplace && --partial-dir are never
+			 * enabled at the same time. */
+			if (inplace && make_backups) {
+				if (!(fnamecmp = get_backup_name(fname)))
+					fnamecmp = fname;
+			} else if (partial_dir && partialptr)
+				fnamecmp = partialptr;
+			else
+				fnamecmp = fname;
+		}
+
 		initial_stats = stats;
 
-		if (verbose > 2)
-			rprintf(FINFO,"recv_files(%s)\n",fname);
-
-		fnamecmp = fname;
-
 		/* open the file */
 		fd1 = do_open(fnamecmp, O_RDONLY, 0);
 
-		if (fd1 == -1 && compare_dest != NULL) {
-			/* try the file at compare_dest instead */
-			pathjoin(fnamecmpbuf, sizeof fnamecmpbuf,
-				 compare_dest, fname);
-			fnamecmp = fnamecmpbuf;
-			fd1 = do_open(fnamecmp, O_RDONLY, 0);
+		if (fd1 == -1 && protocol_version < 29) {
+			if (fnamecmp != fname) {
+				fnamecmp = fname;
+				fd1 = do_open(fnamecmp, O_RDONLY, 0);
+			}
+
+			if (fd1 == -1 && basis_dir[0]) {
+				/* pre-29 allowed only one alternate basis */
+				pathjoin(fnamecmpbuf, sizeof fnamecmpbuf,
+					 basis_dir[0], fname);
+				fnamecmp = fnamecmpbuf;
+				fd1 = do_open(fnamecmp, O_RDONLY, 0);
+			}
 		}
 
 		if (fd1 != -1 && do_fstat(fd1,&st) != 0) {
-			rprintf(FERROR, "fstat %s failed: %s\n",
-				full_fname(fnamecmp), strerror(errno));
-			receive_data(f_in,NULL,-1,NULL,file->length);
+			rsyserr(FERROR, errno, "fstat %s failed",
+				full_fname(fnamecmp));
+			discard_receive_data(f_in, file->length);
 			close(fd1);
 			continue;
 		}
@@ -385,7 +555,7 @@ int recv_files(int f_in,struct file_list *flist,char *local_name)
 			 */
 			rprintf(FERROR,"recv_files: %s is a directory\n",
 				full_fname(fnamecmp));
-			receive_data(f_in, NULL, -1, NULL, file->length);
+			discard_receive_data(f_in, file->length);
 			close(fd1);
 			continue;
 		}
@@ -393,7 +563,6 @@ int recv_files(int f_in,struct file_list *flist,char *local_name)
 		if (fd1 != -1 && !S_ISREG(st.st_mode)) {
 			close(fd1);
 			fd1 = -1;
-			mapbuf = NULL;
 		}
 
 		if (fd1 != -1 && !preserve_perms) {
@@ -403,91 +572,135 @@ int recv_files(int f_in,struct file_list *flist,char *local_name)
 			file->mode = st.st_mode;
 		}
 
-		if (fd1 != -1 && st.st_size > 0) {
-			mapbuf = map_file(fd1,st.st_size);
-			if (verbose > 2)
-				rprintf(FINFO,"recv mapped %s of size %.0f\n",fnamecmp,(double)st.st_size);
-		} else
-			mapbuf = NULL;
+		/* We now check to see if we are writing file "inplace" */
+		if (inplace)  {
+			fd2 = do_open(fname, O_WRONLY|O_CREAT, 0);
+			if (fd2 == -1) {
+				rsyserr(FERROR, errno, "open %s failed",
+					full_fname(fname));
+				discard_receive_data(f_in, file->length);
+				if (fd1 != -1)
+					close(fd1);
+				continue;
+			}
+		} else {
+			if (!get_tmpname(fnametmp,fname)) {
+				discard_receive_data(f_in, file->length);
+				if (fd1 != -1)
+					close(fd1);
+				continue;
+			}
 
-		if (!get_tmpname(fnametmp,fname)) {
-			if (mapbuf) unmap_file(mapbuf);
-			if (fd1 != -1) close(fd1);
-			continue;
-		}
-
-		strlcpy(template, fnametmp, sizeof template);
-
-		/* we initially set the perms without the
-		 * setuid/setgid bits to ensure that there is no race
-		 * condition. They are then correctly updated after
-		 * the lchown. Thanks to snabb@epipe.fi for pointing
-		 * this out.  We also set it initially without group
-		 * access because of a similar race condition. */
-		fd2 = do_mkstemp(fnametmp, file->mode & INITACCESSPERMS);
-
-		/* in most cases parent directories will already exist
-		 * because their information should have been previously
-		 * transferred, but that may not be the case with -R */
-		if (fd2 == -1 && relative_paths && errno == ENOENT &&
-		    create_directory_path(fnametmp, orig_umask) == 0) {
-			strlcpy(fnametmp, template, sizeof fnametmp);
+			/* we initially set the perms without the
+			 * setuid/setgid bits to ensure that there is no race
+			 * condition. They are then correctly updated after
+			 * the lchown. Thanks to snabb@epipe.fi for pointing
+			 * this out.  We also set it initially without group
+			 * access because of a similar race condition. */
 			fd2 = do_mkstemp(fnametmp, file->mode & INITACCESSPERMS);
-		}
-		if (fd2 == -1) {
-			rprintf(FERROR, "mkstemp %s failed: %s\n",
-				full_fname(fnametmp), strerror(errno));
-			receive_data(f_in,mapbuf,-1,NULL,file->length);
-			if (mapbuf) unmap_file(mapbuf);
-			if (fd1 != -1) close(fd1);
-			continue;
+
+			/* in most cases parent directories will already exist
+			 * because their information should have been previously
+			 * transferred, but that may not be the case with -R */
+			if (fd2 == -1 && relative_paths && errno == ENOENT
+			    && create_directory_path(fnametmp, orig_umask) == 0) {
+				/* Get back to name with XXXXXX in it. */
+				get_tmpname(fnametmp, fname);
+				fd2 = do_mkstemp(fnametmp, file->mode & INITACCESSPERMS);
+			}
+			if (fd2 == -1) {
+				rsyserr(FERROR, errno, "mkstemp %s failed",
+					full_fname(fnametmp));
+				discard_receive_data(f_in, file->length);
+				if (fd1 != -1)
+					close(fd1);
+				continue;
+			}
+
+			if (partialptr)
+				cleanup_set(fnametmp, partialptr, file, fd1, fd2);
 		}
 
-		cleanup_set(fnametmp, fname, file, mapbuf, fd1, fd2);
-
-		if (!am_server && verbose) {	/* log transfer */
-			rprintf(FINFO, "%s\n", fname);
-		}
+		/* log the transfer */
+		if (log_before_transfer)
+			log_item(file, &initial_stats, iflags, NULL);
+		else if (!am_server && verbose && do_progress)
+			rprintf(FINFO, "%s\n", safe_fname(fname));
 
 		/* recv file data */
-		recv_ok = receive_data(f_in,mapbuf,fd2,fname,file->length);
+		recv_ok = receive_data(f_in, fnamecmp, fd1, st.st_size,
+				       fname, fd2, file->length);
 
-		log_recv(file, &initial_stats);
+		if (!log_before_transfer)
+			log_item(file, &initial_stats, iflags, NULL);
 
-		if (mapbuf) unmap_file(mapbuf);
-		if (fd1 != -1) {
+		if (fd1 != -1)
 			close(fd1);
-		}
 		if (close(fd2) < 0) {
-			rprintf(FERROR, "close failed on %s: %s\n",
-				full_fname(fnametmp), strerror(errno));
+			rsyserr(FERROR, errno, "close failed on %s",
+				full_fname(fnametmp));
 			exit_cleanup(RERR_FILEIO);
 		}
 
-		if (verbose > 2)
-			rprintf(FINFO,"renaming %s to %s\n",fnametmp,fname);
-
-		finish_transfer(fname, fnametmp, file);
+		if ((recv_ok && (!delay_updates || !partialptr)) || inplace) {
+			finish_transfer(fname, fnametmp, file, recv_ok, 1);
+			if (partialptr != fname && fnamecmp == partialptr) {
+				do_unlink(partialptr);
+				handle_partial_dir(partialptr, PDIR_DELETE);
+			}
+		} else if (keep_partial && partialptr
+		    && handle_partial_dir(partialptr, PDIR_CREATE)) {
+			finish_transfer(partialptr, fnametmp, file, recv_ok,
+					!partial_dir);
+			if (delay_updates && recv_ok) {
+				set_delayed_bit(i);
+				recv_ok = -1;
+			}
+		} else {
+			partialptr = NULL;
+			do_unlink(fnametmp);
+		}
 
 		cleanup_disable();
 
-		if (!recv_ok) {
-			if (csum_length == SUM_LENGTH) {
-				rprintf(FERROR,"ERROR: file corruption in %s. File changed during transfer?\n",
-					full_fname(fname));
-			} else {
-				char buf[4];
-				if (verbose > 1)
-					rprintf(FINFO,"redoing %s(%d)\n",fname,i);
-				SIVAL(buf, 0, i);
-				send_msg(MSG_REDO, buf, 4);
+		if (recv_ok > 0) {
+			if (remove_sent_files
+			    || (preserve_hard_links && file->link_u.links)) {
+				SIVAL(numbuf, 0, i);
+				send_msg(MSG_SUCCESS, numbuf, 4);
+			}
+		} else if (!recv_ok) {
+			int msgtype = phase || read_batch ? FERROR : FINFO;
+			if (msgtype == FERROR || verbose) {
+				char *errstr, *redostr, *keptstr;
+				if (!(keep_partial && partialptr) && !inplace)
+					keptstr = "discarded";
+				else if (partial_dir)
+					keptstr = "put into partial-dir";
+				else
+					keptstr = "retained";
+				if (msgtype == FERROR) {
+					errstr = "ERROR";
+					redostr = "";
+				} else {
+					errstr = "WARNING";
+					redostr = " (will try again)";
+				}
+				rprintf(msgtype,
+					"%s: %s failed verification -- update %s%s.\n",
+					errstr, safe_fname(fname),
+					keptstr, redostr);
+			}
+			if (!phase) {
+				SIVAL(numbuf, 0, i);
+				send_msg(MSG_REDO, numbuf, 4);
 			}
 		}
 	}
+	make_backups = save_make_backups;
 
-	if (delete_after && recurse && delete_mode && !local_name
-	    && flist->count > 0)
-		delete_files(flist);
+	if (phase == 2 && delay_updates) /* for protocol_version < 29 */
+		handle_delayed_updates(flist, local_name);
 
 	if (verbose > 2)
 		rprintf(FINFO,"recv_files finished\n");

rsync.c

@@ -24,15 +24,20 @@
 
 extern int verbose;
 extern int dry_run;
+extern int daemon_log_format_has_i;
 extern int preserve_times;
+extern int omit_dir_times;
 extern int am_root;
 extern int am_server;
 extern int am_sender;
 extern int am_generator;
+extern int am_starting_up;
 extern int preserve_uid;
 extern int preserve_gid;
-extern int preserve_perms;
+extern int inplace;
+extern int keep_dirlinks;
 extern int make_backups;
+extern struct stats stats;
 
 
 /*
@@ -45,109 +50,32 @@ void free_sums(struct sum_struct *s)
 }
 
 
-/*
- * delete a file or directory. If force_delete is set then delete
- * recursively
- */
-int delete_file(char *fname)
-{
-	DIR *d;
-	struct dirent *di;
-	char buf[MAXPATHLEN];
-	extern int force_delete;
-	STRUCT_STAT st;
-	int ret;
-	extern int recurse;
-
-#if SUPPORT_LINKS
-	ret = do_lstat(fname, &st);
-#else
-	ret = do_stat(fname, &st);
-#endif
-	if (ret)
-		return -1;
-
-	if (!S_ISDIR(st.st_mode)) {
-		if (robust_unlink(fname) == 0 || errno == ENOENT)
-			return 0;
-		rprintf(FERROR, "delete_file: unlink %s failed: %s\n",
-			full_fname(fname), strerror(errno));
-		return -1;
-	}
-
-	if (do_rmdir(fname) == 0 || errno == ENOENT)
-		return 0;
-	if (!force_delete || !recurse
-	    || (errno != ENOTEMPTY && errno != EEXIST)) {
-		rprintf(FERROR, "delete_file: rmdir %s failed: %s\n",
-			full_fname(fname), strerror(errno));
-		return -1;
-	}
-
-	/* now we do a recsursive delete on the directory ... */
-	if (!(d = opendir(fname))) {
-		rprintf(FERROR, "delete_file: opendir %s failed: %s\n",
-			full_fname(fname), strerror(errno));
-		return -1;
-	}
-
-	for (errno = 0, di = readdir(d); di; errno = 0, di = readdir(d)) {
-		char *dname = d_name(di);
-		if (dname[0] == '.' && (dname[1] == '\0'
-		    || (dname[1] == '.' && dname[2] == '\0')))
-			continue;
-		pathjoin(buf, sizeof buf, fname, dname);
-		if (verbose > 0)
-			rprintf(FINFO, "deleting %s\n", buf);
-		if (delete_file(buf) != 0) {
-			closedir(d);
-			return -1;
-		}
-	}
-	if (errno) {
-		rprintf(FERROR, "delete_file: readdir %s failed: %s\n",
-			full_fname(fname), strerror(errno));
-		closedir(d);
-		return -1;
-	}
-
-	closedir(d);
-
-	if (do_rmdir(fname) != 0) {
-		rprintf(FERROR, "delete_file: rmdir %s failed: %s\n",
-			full_fname(fname), strerror(errno));
-		return -1;
-	}
-
-	return 0;
-}
-
 int set_perms(char *fname,struct file_struct *file,STRUCT_STAT *st,
-		int report)
+	      int flags)
 {
 	int updated = 0;
 	STRUCT_STAT st2;
 	int change_uid, change_gid;
 
-	if (dry_run) return 0;
-
 	if (!st) {
-		if (link_stat(fname,&st2) != 0) {
-			rprintf(FERROR, "stat %s failed: %s\n",
-				full_fname(fname), strerror(errno));
+		if (dry_run)
+			return 1;
+		if (link_stat(fname, &st2, 0) < 0) {
+			rsyserr(FERROR, errno, "stat %s failed",
+				full_fname(fname));
 			return 0;
 		}
 		st = &st2;
 	}
 
-	if (preserve_times && !S_ISLNK(st->st_mode) &&
-	    cmp_modtime(st->st_mtime, file->modtime) != 0) {
-		/* don't complain about not setting times on directories
-		 * because some filesystems can't do it */
-		if (set_modtime(fname,file->modtime) != 0 &&
-		    !S_ISDIR(st->st_mode)) {
-			rprintf(FERROR, "failed to set times on %s: %s\n",
-				full_fname(fname), strerror(errno));
+	if (!preserve_times || S_ISLNK(st->st_mode)
+	 || (S_ISDIR(st->st_mode) && omit_dir_times))
+		flags |= PERMS_SKIP_MTIME;
+	if (!(flags & PERMS_SKIP_MTIME)
+	    && cmp_modtime(st->st_mtime, file->modtime) != 0) {
+		if (set_modtime(fname,file->modtime) != 0) {
+			rsyserr(FERROR, errno, "failed to set times on %s",
+				full_fname(fname));
 			return 0;
 		}
 		updated = 1;
@@ -156,17 +84,24 @@ int set_perms(char *fname,struct file_struct *file,STRUCT_STAT *st,
 	change_uid = am_root && preserve_uid && st->st_uid != file->uid;
 	change_gid = preserve_gid && file->gid != GID_NONE
 		&& st->st_gid != file->gid;
+#if !defined HAVE_LCHOWN && !defined CHOWN_MODIFIES_SYMLINK
+	if (S_ISLNK(st->st_mode))
+		;
+	else
+#endif
 	if (change_uid || change_gid) {
 		if (verbose > 2) {
 			if (change_uid) {
 				rprintf(FINFO,
-				    "set uid of %s from %ld to %ld\n",
-				    fname, (long)st->st_uid, (long)file->uid);
+					"set uid of %s from %ld to %ld\n",
+					safe_fname(fname),
+					(long)st->st_uid, (long)file->uid);
 			}
 			if (change_gid) {
 				rprintf(FINFO,
-				    "set gid of %s from %ld to %ld\n",
-				    fname, (long)st->st_gid, (long)file->gid);
+					"set gid of %s from %ld to %ld\n",
+					safe_fname(fname),
+					(long)st->st_gid, (long)file->gid);
 			}
 		}
 		if (do_lchown(fname,
@@ -174,16 +109,17 @@ int set_perms(char *fname,struct file_struct *file,STRUCT_STAT *st,
 		    change_gid ? file->gid : st->st_gid) != 0) {
 			/* shouldn't have attempted to change uid or gid
 			 * unless have the privilege */
-			rprintf(FERROR, "%s %s failed: %s\n",
+			rsyserr(FERROR, errno, "%s %s failed",
 			    change_uid ? "chown" : "chgrp",
-			    full_fname(fname), strerror(errno));
+			    full_fname(fname));
 			return 0;
 		}
 		/* a lchown had been done - we have to re-stat if the
-                 * destination had the setuid or setgid bits set due
-                 * to the side effect of the chown call */
+		 * destination had the setuid or setgid bits set due
+		 * to the side effect of the chown call */
 		if (st->st_mode & (S_ISUID | S_ISGID)) {
-			link_stat(fname, st);
+			link_stat(fname, st,
+				  keep_dirlinks && S_ISDIR(st->st_mode));
 		}
 		updated = 1;
 	}
@@ -193,19 +129,21 @@ int set_perms(char *fname,struct file_struct *file,STRUCT_STAT *st,
 		if ((st->st_mode & CHMOD_BITS) != (file->mode & CHMOD_BITS)) {
 			updated = 1;
 			if (do_chmod(fname,(file->mode & CHMOD_BITS)) != 0) {
-				rprintf(FERROR, "failed to set permissions on %s: %s\n",
-					full_fname(fname), strerror(errno));
+				rsyserr(FERROR, errno, "failed to set permissions on %s",
+					full_fname(fname));
 				return 0;
 			}
 		}
 	}
 #endif
 
-	if (verbose > 1 && report) {
+	if (verbose > 1 && flags & PERMS_REPORT) {
+		enum logcode code = daemon_log_format_has_i || dry_run
+				  ? FCLIENT : FINFO;
 		if (updated)
-			rprintf(FINFO,"%s\n",fname);
+			rprintf(code, "%s\n", safe_fname(fname));
 		else
-			rprintf(FINFO,"%s is uptodate\n",fname);
+			rprintf(code, "%s is uptodate\n", safe_fname(fname));
 	}
 	return updated;
 }
@@ -228,26 +166,47 @@ void sig_int(void)
 
 /* finish off a file transfer, renaming the file and setting the permissions
    and ownership */
-void finish_transfer(char *fname, char *fnametmp, struct file_struct *file)
+void finish_transfer(char *fname, char *fnametmp, struct file_struct *file,
+		     int ok_to_set_time, int overwriting_basis)
 {
 	int ret;
 
-	if (make_backups && !make_backup(fname))
+	if (inplace) {
+		if (verbose > 2)
+			rprintf(FINFO, "finishing %s\n", safe_fname(fname));
+		goto do_set_perms;
+	}
+
+	if (make_backups && overwriting_basis && !make_backup(fname))
 		return;
 
+	/* Change permissions before putting the file into place. */
+	set_perms(fnametmp, file, NULL, ok_to_set_time ? 0 : PERMS_SKIP_MTIME);
+
 	/* move tmp file over real file */
+	if (verbose > 2) {
+		rprintf(FINFO, "renaming %s to %s\n",
+			safe_fname(fnametmp), safe_fname(fname));
+	}
 	ret = robust_rename(fnametmp, fname, file->mode & INITACCESSPERMS);
 	if (ret < 0) {
-		rprintf(FERROR, "%s %s -> \"%s\": %s\n",
+		rsyserr(FERROR, errno, "%s %s -> \"%s\"",
 		    ret == -2 ? "copy" : "rename",
-		    full_fname(fnametmp), fname, strerror(errno));
+		    full_fname(fnametmp), safe_fname(fname));
 		do_unlink(fnametmp);
-	} else {
-		set_perms(fname,file,NULL,0);
+		return;
 	}
+	if (ret == 0) {
+		/* The file was moved into place (not copied), so it's done. */
+		return;
+	}
+    do_set_perms:
+	set_perms(fname, file, NULL, ok_to_set_time ? 0 : PERMS_SKIP_MTIME);
 }
 
 const char *who_am_i(void)
 {
-    return am_sender ? "sender" : am_generator ? "generator" : "receiver";
+	if (am_starting_up)
+		return am_server ? "server" : "client";
+	return am_sender ? "sender" : am_generator ? "generator" : "receiver";
 }

rsync.h

@@ -1,18 +1,18 @@
-/* 
+/*
    Copyright (C) by Andrew Tridgell 1996, 2000
    Copyright (C) Paul Mackerras 1996
    Copyright (C) 2001, 2002 by Martin Pool <mbp@samba.org>
-   
+
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
-   
+
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-   
+
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
@@ -58,11 +58,15 @@
 /* These flags are used in the live flist data. */
 
 #define FLAG_TOP_DIR (1<<0)
-#define FLAG_HLINK_EOL (1<<1)	/* generator only */
-#define FLAG_MOUNT_POINT (1<<2)	/* sender only */
+#define FLAG_HLINK_EOL (1<<1)	/* receiver/generator */
+#define FLAG_MOUNT_POINT (1<<2)	/* sender */
+#define FLAG_NO_FUZZY (1<<2)	/* generator */
+#define FLAG_DEL_HERE (1<<3)	/* receiver/generator */
+#define FLAG_SENT (1<<3)	/* sender */
+#define FLAG_HLINK_TOL (1<<4)	/* receiver/generator */
 
 /* update this if you make incompatible changes */
-#define PROTOCOL_VERSION 28
+#define PROTOCOL_VERSION 29
 
 /* We refuse to interoperate with versions that are not in this range.
  * Note that we assume we'll work with later versions: the onus is on
@@ -92,38 +96,85 @@
 #define CHUNK_SIZE (32*1024)
 #define MAX_MAP_SIZE (256*1024)
 #define IO_BUFFER_SIZE (4092)
+#define MAX_BLOCK_SIZE ((int32)1 << 29)
 
 #define IOERR_GENERAL	(1<<0) /* For backward compatibility, this must == 1 */
 #define IOERR_VANISHED	(1<<1)
+#define IOERR_DEL_LIMIT (1<<2)
 
 #define MAX_ARGS 1000
 
+#define MAX_BASIS_DIRS 20
+
 #define MPLEX_BASE 7
 
-#define NO_EXCLUDES	0
-#define SERVER_EXCLUDES	1
-#define ALL_EXCLUDES	2
+#define NO_FILTERS	0
+#define SERVER_FILTERS	1
+#define ALL_FILTERS	2
 
 #define XFLG_FATAL_ERRORS	(1<<0)
-#define XFLG_DEF_INCLUDE	(1<<1)
-#define XFLG_WORDS_ONLY 	(1<<2)
-#define XFLG_WORD_SPLIT 	(1<<3)
+#define XFLG_OLD_PREFIXES	(1<<1)
+#define XFLG_ANCHORED2ABS	(1<<2)
+
+#define PERMS_REPORT		(1<<0)
+#define PERMS_SKIP_MTIME	(1<<1)
 
 #define FULL_FLUSH	1
 #define NORMAL_FLUSH	0
 
+#define PDIR_CREATE	1
+#define PDIR_DELETE	0
 
-/* Log-message categories.  FLOG is only used on the daemon side to
- * output messages to the log file. */
-enum logcode { FERROR=1, FINFO=2, FLOG=3 };
+/* Note: 0x00 - 0x7F are used for basis_dir[] indexes! */
+#define FNAMECMP_BASIS_DIR_LOW	0x00 /* Must remain 0! */
+#define FNAMECMP_BASIS_DIR_HIGH 0x7F
+#define FNAMECMP_FNAME		0x80
+#define FNAMECMP_PARTIAL_DIR	0x81
+#define FNAMECMP_BACKUP 	0x82
+#define FNAMECMP_FUZZY		0x83
+
+/* For calling delete_file() */
+#define DEL_NO_RECURSE		(1<<1)
+#define DEL_FORCE_RECURSE	(1<<2) /* recurse even w/o --force */
+#define DEL_TERSE		(1<<3)
+
+/* For use by the itemize_changes code */
+#define ITEM_DUMMY_BIT (1<<0)
+#define ITEM_REPORT_CHECKSUM (1<<1)
+#define ITEM_REPORT_SIZE (1<<2)
+#define ITEM_REPORT_TIME (1<<3)
+#define ITEM_REPORT_PERMS (1<<4)
+#define ITEM_REPORT_OWNER (1<<5)
+#define ITEM_REPORT_GROUP (1<<6)
+#define ITEM_REPORT_XATTRS (1<<7)
+#define ITEM_BASIS_TYPE_FOLLOWS (1<<11)
+#define ITEM_XNAME_FOLLOWS (1<<12)
+#define ITEM_IS_NEW (1<<13)
+#define ITEM_LOCAL_CHANGE (1<<14)
+#define ITEM_TRANSFER (1<<15)
+/* These are outside the range of the transmitted flags. */
+#define ITEM_NO_DEST_AND_NO_UPDATE (1<<16) /* used by itemize() */
+#define ITEM_MISSING_DATA (1<<16)	   /* used by log_formatted() */
+#define ITEM_DELETED (1<<17)		   /* used by log_formatted() */
+
+#define SIGNIFICANT_ITEM_FLAGS (~(\
+	ITEM_BASIS_TYPE_FOLLOWS | ITEM_XNAME_FOLLOWS | ITEM_LOCAL_CHANGE))
+
+
+/* Log-message categories.  FLOG and FCLIENT are only used on the daemon
+ * side for custom logging -- they don't get sent over the socket. */
+enum logcode { FERROR=1, FINFO=2, FLOG=3, FCLIENT=4 };
 
 /* Messages types that are sent over the message channel.  The logcode
  * values must all be present here with identical numbers. */
 enum msgcode {
 	MSG_DATA=0,	/* raw data on the multiplexed stream */
-	MSG_ERROR=FERROR, MSG_INFO=FINFO, MSG_LOG=FLOG, /* remote logging */
-	MSG_REDO=4,	/* reprocess indicated flist index */
-	MSG_DONE=5,	/* current phase is done */
+	MSG_ERROR=FERROR, MSG_INFO=FINFO, /* remote logging */
+	MSG_LOG=FLOG, MSG_FCLIENT=FCLIENT, /* sibling logging */
+	MSG_REDO=9,	/* reprocess indicated flist index */
+	MSG_SUCCESS=100,/* successfully updated indicated flist index */
+	MSG_DELETED=101,/* successfully deleted a file on receiving side */
+	MSG_DONE=86	/* current phase is done */
 };
 
 #include "errcode.h"
@@ -132,23 +183,39 @@ enum msgcode {
 
 /* The default RSYNC_RSH is always set in config.h. */
 
-#include <sys/types.h>
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
 #include <stdio.h>
-#include <stddef.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif
 
 #ifdef HAVE_SYS_PARAM_H
 #include <sys/param.h>
 #endif
 
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-
-#if defined(HAVE_MALLOC_H) && (defined(HAVE_MALLINFO) || !defined(HAVE_STDLIB_H))
+#if defined HAVE_MALLOC_H && (defined HAVE_MALLINFO || !defined HAVE_STDLIB_H)
 #include <malloc.h>
 #endif
 
@@ -156,10 +223,6 @@ enum msgcode {
 #include <sys/socket.h>
 #endif
 
-#ifdef HAVE_STRING_H
-#include <string.h>
-#endif
-
 #ifdef TIME_WITH_SYS_TIME
 #include <sys/time.h>
 #include <time.h>
@@ -179,8 +242,6 @@ enum msgcode {
 #endif
 #endif
 
-#include <sys/stat.h>
-
 #ifdef HAVE_SYS_IOCTL_H
 #include <sys/ioctl.h>
 #endif
@@ -231,24 +292,27 @@ enum msgcode {
 #include <syslog.h>
 #include <sys/file.h>
 
-#if HAVE_DIRENT_H
+#ifdef HAVE_DIRENT_H
 # include <dirent.h>
 #else
 # define dirent direct
-# if HAVE_SYS_NDIR_H
+# ifdef HAVE_SYS_NDIR_H
 #  include <sys/ndir.h>
 # endif
-# if HAVE_SYS_DIR_H
+# ifdef HAVE_SYS_DIR_H
 #  include <sys/dir.h>
 # endif
-# if HAVE_NDIR_H
+# ifdef HAVE_NDIR_H
 #  include <ndir.h>
 # endif
 #endif
 
-#if MAJOR_IN_MKDEV
+#ifdef MAJOR_IN_MKDEV
 #include <sys/mkdev.h>
-#elif MAJOR_IN_SYSMACROS
+# if !defined makedev && (defined mkdev || defined _WIN32 || defined __WIN32__)
+#  define makedev mkdev
+# endif
+#elif defined MAJOR_IN_SYSMACROS
 #include <sys/sysmacros.h>
 #endif
 
@@ -266,61 +330,85 @@ enum msgcode {
 #define uchar unsigned char
 #endif
 
-#if HAVE_UNSIGNED_CHAR
+#ifdef SIGNED_CHAR_OK
 #define schar signed char
 #else
 #define schar char
 #endif
 
+/* Find a variable that is either exactly 32-bits or longer.
+ * If some code depends on 32-bit truncation, it will need to
+ * take special action in a "#if SIZEOF_INT32 > 4" section. */
 #ifndef int32
-#if (SIZEOF_INT == 4)
-#define int32 int
-#elif (SIZEOF_LONG == 4)
-#define int32 long
-#elif (SIZEOF_SHORT == 4)
-#define int32 short
+#if SIZEOF_INT == 4
+# define int32 int
+# define SIZEOF_INT32 4
+#elif SIZEOF_LONG == 4
+# define int32 long
+# define SIZEOF_INT32 4
+#elif SIZEOF_SHORT == 4
+# define int32 short
+# define SIZEOF_INT32 4
+#elif SIZEOF_INT > 4
+# define int32 int
+# define SIZEOF_INT32 SIZEOF_INT
+#elif SIZEOF_LONG > 4
+# define int32 long
+# define SIZEOF_INT32 SIZEOF_LONG
 #else
-/* I hope this works */
-#define int32 int
-#define LARGE_INT32
+# error Could not find a 32-bit integer variable
 #endif
+#else
+# define SIZEOF_INT32 4
 #endif
 
 #ifndef uint32
 #define uint32 unsigned int32
 #endif
 
-#if HAVE_OFF64_T
-#define OFF_T off64_t
-#define STRUCT_STAT struct stat64
-#else
+#if SIZEOF_OFF_T == 8 || !SIZEOF_OFF64_T || !defined HAVE_STRUCT_STAT64
 #define OFF_T off_t
 #define STRUCT_STAT struct stat
+#else
+#define OFF_T off64_t
+#define STRUCT_STAT struct stat64
+#define USE_STAT64_FUNCS 1
 #endif
 
-#if HAVE_OFF64_T
-#define int64 off64_t
-#elif (SIZEOF_LONG == 8) 
-#define int64 long
-#elif (SIZEOF_INT == 8) 
-#define int64 int
-#elif HAVE_LONGLONG
-#define int64 long long
+/* CAVEAT: on some systems, int64 will really be a 32-bit integer IFF
+ * that's the maximum size the file system can handle and there is no
+ * 64-bit type available.  The rsync source must therefore take steps
+ * to ensure that any code that really requires a 64-bit integer has
+ * it (e.g. the checksum code uses two 32-bit integers for its 64-bit
+ * counter). */
+#if SIZEOF_OFF64_T == 8
+# define int64 off64_t
+# define SIZEOF_INT64 8
+#elif SIZEOF_LONG == 8
+# define int64 long
+# define SIZEOF_INT64 8
+#elif SIZEOF_INT == 8
+# define int64 int
+# define SIZEOF_INT64 8
+#elif SIZEOF_LONG_LONG == 8
+# define int64 long long
+# define SIZEOF_INT64 8
+#elif SIZEOF_OFF_T == 8
+# define int64 off_t
+# define SIZEOF_INT64 8
+#elif SIZEOF_INT > 8
+# define int64 int
+# define SIZEOF_INT64 SIZEOF_INT
+#elif SIZEOF_LONG > 8
+# define int64 long
+# define SIZEOF_INT64 SIZEOF_LONG
+#elif SIZEOF_LONG_LONG > 8
+# define int64 long long
+# define SIZEOF_INT64 SIZEOF_LONG_LONG
 #else
 /* As long as it gets... */
-#define int64 off_t
-#define NO_INT64
-#endif
-
-#if (SIZEOF_LONG == 8) 
-#define uint64 unsigned long
-#elif (SIZEOF_INT == 8) 
-#define uint64 unsigned int
-#elif HAVE_LONGLONG
-#define uint64 unsigned long long
-#else
-/* As long as it gets... */
-#define uint64 unsigned off_t
+# define int64 off_t
+# define SIZEOF_INT64 SIZEOF_OFF_T
 #endif
 
 /* Starting from protocol version 26, we always use 64-bit
@@ -347,11 +435,11 @@ enum msgcode {
  *
  * FIXME: I don't think the code in flist.c has ever worked on a system
  * where dev_t is a struct.
- */ 
+ */
 
 struct idev {
-	uint64 inode;
-	uint64 dev;
+	int64 inode;
+	int64 dev;
 };
 
 #ifndef MIN
@@ -388,14 +476,14 @@ struct idev {
 #define IN_LOOPBACKNET 127
 #endif
 
-#define GID_NONE (gid_t) -1
+#define GID_NONE ((gid_t)-1)
 
 #define HL_CHECK_MASTER	0
 #define HL_SKIP		1
 
 struct hlink {
+	int next;
 	int hlindex;
-	struct file_struct *next;
 };
 
 #define F_DEV	link_u.idev->dev
@@ -411,9 +499,12 @@ struct file_struct {
 		char *link;	/* Points to symlink string, if a symlink */
 	} u;
 	OFF_T length;
-	char *basename;
-	char *dirname;
-	char *basedir;
+	char *basename;		/* The current item's name (AKA filename) */
+	char *dirname;		/* The directory info inside the transfer */
+	union {
+		char *root;	/* Sender-side dir info outside transfer */
+		int depth;	/* Receiver-side directory depth info */
+	} dir;
 	union {
 		struct idev *idev;
 		struct hlink *links;
@@ -448,60 +539,81 @@ struct file_struct {
 #define WITHOUT_HLINK	0
 
 struct file_list {
-	int count;
-	int malloced;
+	struct file_struct **files;
 	alloc_pool_t file_pool;
 	alloc_pool_t hlink_pool;
-	struct file_struct **files;
+	int count;
+	int malloced;
+	int low, high;
 };
 
+#define SUMFLG_SAME_OFFSET	(1<<0)
+
 struct sum_buf {
 	OFF_T offset;		/**< offset in file of this chunk */
-	unsigned int len;	/**< length of chunk of file */
-	int i;			/**< index of this chunk */
+	int32 len;		/**< length of chunk of file */
 	uint32 sum1;	        /**< simple checksum */
+	short flags;		/**< flag bits */
 	char sum2[SUM_LENGTH];	/**< checksum  */
 };
 
 struct sum_struct {
 	OFF_T flength;		/**< total file length */
-	size_t count;		/**< how many chunks */
-	unsigned int blength;	/**< block_length */
-	unsigned int remainder;	/**< flength % block_length */
-	int s2length;		/**< sum2_length */
 	struct sum_buf *sums;	/**< points to info for each chunk */
+	int32 count;		/**< how many chunks */
+	int32 blength;		/**< block_length */
+	int32 remainder;	/**< flength % block_length */
+	int s2length;		/**< sum2_length */
 };
 
 struct map_struct {
-	char *p;		/* Window pointer			*/
-	int fd;			/* File Descriptor			*/
-	int p_size;		/* Window size at allocation		*/
-	int p_len;		/* Window size after fill		*/
-				/*    p_size and p_len could be
-				 *    consolodated by using a local
-				 *    variable in map_ptr()		*/
-	int status;		/* first errno from read errors		*/
 	OFF_T file_size;	/* File size (from stat)		*/
 	OFF_T p_offset;		/* Window start				*/
 	OFF_T p_fd_offset;	/* offset of cursor in fd ala lseek	*/
+	char *p;		/* Window pointer			*/
+	int32 p_size;		/* Largest window size we allocated	*/
+	int32 p_len;		/* Latest (rounded) window size		*/
+	int32 def_window_size;	/* Default window size			*/
+	int fd;			/* File Descriptor			*/
+	int status;		/* first errno from read errors		*/
 };
 
 #define MATCHFLG_WILD		(1<<0) /* pattern has '*', '[', and/or '?' */
 #define MATCHFLG_WILD2		(1<<1) /* pattern has '**' */
 #define MATCHFLG_WILD2_PREFIX	(1<<2) /* pattern starts with '**' */
 #define MATCHFLG_ABS_PATH	(1<<3) /* path-match on absolute path */
-struct exclude_struct {
-	struct exclude_struct *next;
+#define MATCHFLG_INCLUDE	(1<<4) /* this is an include, not an exclude */
+#define MATCHFLG_DIRECTORY	(1<<5) /* this matches only directories */
+#define MATCHFLG_CLEAR_LIST 	(1<<6) /* this item is the "!" token */
+#define MATCHFLG_WORD_SPLIT	(1<<7) /* split rules on whitespace */
+#define MATCHFLG_NO_INHERIT	(1<<8) /* don't inherit these rules */
+#define MATCHFLG_NO_PREFIXES	(1<<9) /* parse no prefixes from patterns */
+#define MATCHFLG_MERGE_FILE	(1<<10)/* specifies a file to merge */
+#define MATCHFLG_PERDIR_MERGE	(1<<11)/* merge-file is searched per-dir */
+#define MATCHFLG_EXCLUDE_SELF	(1<<12)/* merge-file name should be excluded */
+#define MATCHFLG_FINISH_SETUP	(1<<13)/* per-dir merge file needs setup */
+#define MATCHFLG_NEGATE 	(1<<14)/* rule matches when pattern does not */
+#define MATCHFLG_CVS_IGNORE	(1<<15)/* rule was -C or :C */
+#define MATCHFLG_SENDER_SIDE	(1<<16)/* rule applies to the sending side */
+#define MATCHFLG_RECEIVER_SIDE	(1<<17)/* rule applies to the receiving side */
+
+#define MATCHFLGS_FROM_CONTAINER (MATCHFLG_ABS_PATH | MATCHFLG_INCLUDE \
+				| MATCHFLG_DIRECTORY | MATCHFLG_SENDER_SIDE \
+				| MATCHFLG_NEGATE | MATCHFLG_RECEIVER_SIDE)
+
+struct filter_struct {
+	struct filter_struct *next;
 	char *pattern;
-	int match_flags;
-	int include;
-	int directory;
-	int slash_cnt;
+	uint32 match_flags;
+	union {
+		int slash_cnt;
+		struct filter_list_struct *mergelist;
+	} u;
 };
 
-struct exclude_list_struct {
-	struct exclude_struct *head;
-	struct exclude_struct *tail;
+struct filter_list_struct {
+	struct filter_struct *head;
+	struct filter_struct *tail;
 	char *debug_type;
 };
 
@@ -512,6 +624,8 @@ struct stats {
 	int64 total_read;
 	int64 literal_data;
 	int64 matched_data;
+	int64 flist_buildtime;
+	int64 flist_xfertime;
 	int flist_size;
 	int num_files;
 	int num_transferred_files;
@@ -519,15 +633,6 @@ struct stats {
 };
 
 
-/* we need this function because of the silly way in which duplicate
-   entries are handled in the file lists - we can't change this
-   without breaking existing versions */
-static inline int flist_up(struct file_list *flist, int i)
-{
-	while (!flist->files[i]->basename) i++;
-	return i;
-}
-
 #include "byteorder.h"
 #include "lib/mdfour.h"
 #include "lib/wildmatch.h"
@@ -545,18 +650,18 @@ int asprintf(char **ptr, const char *format, ...);
 int vasprintf(char **ptr, const char *format, va_list ap);
 #endif
 
-#if !defined(HAVE_VSNPRINTF) || !defined(HAVE_C99_VSNPRINTF)
+#if !defined HAVE_VSNPRINTF || !defined HAVE_C99_VSNPRINTF
 #define vsnprintf rsync_vsnprintf
 int vsnprintf(char *str, size_t count, const char *fmt, va_list args);
 #endif
 
-#if !defined(HAVE_SNPRINTF) || !defined(HAVE_C99_VSNPRINTF)
+#if !defined HAVE_SNPRINTF || !defined HAVE_C99_VSNPRINTF
 #define snprintf rsync_snprintf
 int snprintf(char *str,size_t count,const char *fmt,...);
 #endif
 
 
-#if !HAVE_STRERROR
+#ifndef HAVE_STRERROR
 extern char *sys_errlist[];
 #define strerror(i) sys_errlist[i]
 #endif
@@ -573,13 +678,6 @@ extern int errno;
 #define SUPPORT_LINKS HAVE_READLINK
 #define SUPPORT_HARD_LINKS HAVE_LINK
 
-/* This could be bad on systems which have no lchown and where chown
- * follows symbollic links.  On such systems it might be better not to
- * try to chown symlinks at all. */
-#ifndef HAVE_LCHOWN
-#define lchown chown
-#endif
-
 #define SIGNAL_CAST (RETSIGTYPE (*)())
 
 #ifndef EWOULDBLOCK
@@ -663,9 +761,9 @@ extern int errno;
 /* work out what fcntl flag to use for non-blocking */
 #ifdef O_NONBLOCK
 # define NONBLOCK_FLAG O_NONBLOCK
-#elif defined(SYSV)
+#elif defined SYSV
 # define NONBLOCK_FLAG O_NDELAY
-#else 
+#else
 # define NONBLOCK_FLAG FNDELAY
 #endif
 
@@ -685,13 +783,13 @@ extern int errno;
 #define INITACCESSPERMS 0700
 
 /* handler for null strings in printf format */
-#define NS(s) ((s)?(s):"<NULL>")
+#define NS(s) ((s)?safe_fname(s):"<NULL>")
 
-#if !defined(__GNUC__) || defined(APPLE)
+#if !defined __GNUC__ || defined __APPLE__
 /* Apparently the OS X port of gcc gags on __attribute__.
  *
  * <http://www.opensource.apple.com/bugs/X/gcc/2512150.html> */
-#define __attribute__(x) 
+#define __attribute__(x)
 
 #endif
 
@@ -749,9 +847,8 @@ size_t strlcat(char *d, const char *s, size_t bufsize);
 extern int verbose;
 
 #ifndef HAVE_INET_NTOP
-const char *                 
-inet_ntop(int af, const void *src, char *dst, size_t size);
-#endif /* !HAVE_INET_NTOP */
+const char *inet_ntop(int af, const void *src, char *dst, size_t size);
+#endif
 
 #ifndef HAVE_INET_PTON
 int inet_pton(int af, const char *src, void *dst);

rsyncd.conf.yo

@@ -1,5 +1,5 @@
 mailto(rsync-bugs@samba.org)
-manpage(rsyncd.conf)(5)(30 Apr 2004)()()
+manpage(rsyncd.conf)(5)(30 Mar 2005)()()
 manpagename(rsyncd.conf)(configuration file for rsync server)
 manpagesynopsis()
 
@@ -19,7 +19,7 @@ The file consists of modules and parameters. A module begins with the
 name of the module in square brackets and continues until the next
 module begins. Modules contain parameters of the form 'name = value'.
 
-The file is line-based - that is, each newline-terminated line represents
+The file is line-based -- that is, each newline-terminated line represents
 either a comment, a module name or a parameter.
 
 Only the first equals sign in a parameter is significant. Whitespace before 
@@ -41,7 +41,7 @@ in string values.
 
 manpagesection(LAUNCHING THE RSYNC DAEMON)
 
-The rsync daemon is launched by specifying the --daemon option to
+The rsync daemon is launched by specifying the bf(--daemon) option to
 rsync. 
 
 The daemon must run with root privileges if you wish to use chroot, to
@@ -51,18 +51,18 @@ write the appropriate data, log, and lock files.
 
 You can launch it either via inetd, as a stand-alone daemon, or from
 an rsync client via a remote shell.  If run as a stand-alone daemon then
-just run the command "rsync --daemon" from a suitable startup script.
+just run the command "bf(rsync --daemon)" from a suitable startup script.
 If run from an rsync client via a remote shell (by specifying both the
-"-e/--rsh" option and server mode with "::" or "rsync://"), the --daemon
+bf(--rsh) (bf(-e)) option and server mode with "::" or "rsync://"), the bf(--daemon)
 option is automatically passed to the remote side.
 
 When run via inetd you should add a line like this to /etc/services:
 
-quote(rsync           873/tcp)
+verb(  rsync           873/tcp)
 
 and a single line something like this to /etc/inetd.conf:
     
-quote(rsync   stream  tcp     nowait  root   /usr/bin/rsync rsyncd --daemon)
+verb(  rsync   stream  tcp     nowait  root   /usr/bin/rsync rsyncd --daemon)
 
 Replace "/usr/bin/rsync" with the path to where you have rsync installed on
 your system.  You will then need to send inetd a HUP signal to tell it to
@@ -134,12 +134,12 @@ dit(bf(use chroot)) If "use chroot" is true, the rsync server will chroot
 to the "path" before starting the file transfer with the client.  This has
 the advantage of extra protection against possible implementation security
 holes, but it has the disadvantages of requiring super-user privileges, 
-of not being able to follow symbolic links outside of the new root path
-when reading, and of complicating the preservation of usernames and groups
+of not being able to follow symbolic links that are either absolute or outside
+of the new root path, and of complicating the preservation of usernames and groups
 (see below).  When "use chroot" is false, for security reasons,
 symlinks may only be relative paths pointing to other files within the root
 path, and leading slashes are removed from most absolute paths (options
-such as --backup-dir, --compare-dest, etc. interpret an absolute path as
+such as bf(--backup-dir), bf(--compare-dest), etc. interpret an absolute path as
 rooted in the module's "path" dir, just as if chroot was specified).
 The default for "use chroot" is true.
 
@@ -149,17 +149,29 @@ getpwuid(), getgrgid(), getpwname(), and getgrnam()).  This means a
 process in the chroot namespace will need to have access to the resources
 used by these library functions (traditionally /etc/passwd and
 /etc/group).  If these resources are not available, rsync will only be
-able to copy the IDs, just as if the --numeric-ids option had been
+able to copy the IDs, just as if the bf(--numeric-ids) option had been
 specified.
 
 Note that you are free to setup user/group information in the chroot area
 differently from your normal system.  For example, you could abbreviate
-the list of users and groups.  Also, you can protect this information
-from being downloaded by adding an exclude rule to the rsync.conf file
-(e.g. "exclude = /etc/").  To protect it from being changed by an upload
-(if the module is not read only), be sure to set the permissions (or
-owner) on the files and/or parent directories so that they cannot be
-written by the daemon.
+the list of users and groups.  Also, you can protect this information from
+being downloaded/uploaded by adding an exclude rule to the rsync.conf file
+(e.g. "exclude = /etc/**").  Note that having the exclusion affect uploads
+is a relatively new feature in rsync, so make sure your server is running
+at least 2.6.3 to effect this.  Also note that it is safest to exclude a
+directory and all its contents combining the rule "/some/dir/" with the
+rule "/some/dir/**" just to be sure that rsync will not allow deeper
+access to some of the excluded files inside the directory (rsync tries to
+do this automatically, but you might as well specify both to be extra
+sure).
+
+dit(bf(port)) You can override the default port the daemon will listen on
+by specifying this value (defaults to 873).  This is ignored if the daemon
+is being run by inetd, and is superseded by the bf(--port) command-line option.
+
+dit(bf(address)) You can override the default IP address the daemon
+will listen on by specifying this value.  This is ignored if the daemon is
+being run by inetd, and is superseded by the bf(--address) command-line option.
 
 dit(bf(max connections)) The "max connections" option allows you to
 specify the maximum number of simultaneous connections you will allow.
@@ -167,6 +179,11 @@ Any clients connecting when the maximum has been reached will receive a
 message telling them to try later.  The default is 0 which means no limit.
 See also the "lock file" option.
 
+dit(bf(max verbosity)) The "max verbosity" option allows you to control
+the maximum amount of verbose information that you'll allow the daemon to
+generate (since the information goes into the log file). The default is 1,
+which allows the client to request one level of verbosity.
+
 dit(bf(lock file)) The "lock file" option specifies the file to use to
 support the "max connections" option. The rsync server uses record
 locking on this file to ensure that the max connections limit is not
@@ -179,6 +196,12 @@ attempted uploads will fail. If "read only" is false then uploads will
 be possible if file permissions on the server allow them. The default
 is for all modules to be read only.
 
+dit(bf(write only)) The "write only" option determines whether clients
+will be able to download files or not. If "write only" is true then any
+attempted downloads will fail. If "write only" is false then downloads
+will be possible if file permissions on the server allow them.  The
+default is for this option to be disabled.
+
 dit(bf(list)) The "list" option determines if this module should be
 listed when the client asks for a listing of available modules. By
 setting this to false you can create hidden modules. The default is
@@ -195,48 +218,52 @@ file transfers to and from that module should take place as when the daemon
 was run as root. This complements the "uid" option. The default is gid -2,
 which is normally the group "nobody".
 
-dit(bf(exclude)) The "exclude" option allows you to specify a space
-separated list of patterns to add to the exclude list.
-This is only superficially equivalent
-to the client specifying these patterns with the --exclude option.
-Only one "exclude" option may be specified, but
-you can use "-" and "+" before patterns to specify exclude/include.
+dit(bf(filter)) The "filter" option allows you to specify a space-separated
+list of filter rules that the server will not allow to be read or written.
+This is only superficially equivalent to the client specifying these
+patterns with the bf(--filter) option.  Only one "filter" option may be
+specified, but it may contain as many rules as you like, including
+merge-file rules.  Note that per-directory merge-file rules do not provide
+as much protection as global rules, but they can be used to make bf(--delete)
+work better when a client downloads the server's files (if the per-dir
+merge files are included in the transfer).
+
+dit(bf(exclude)) The "exclude" option allows you to specify a
+space-separated list of patterns that the server will not allow to be read
+or written.  This is only superficially equivalent to the client
+specifying these patterns with the bf(--exclude) option.  Only one "exclude"
+option may be specified, but you can use "-" and "+" before patterns to
+specify exclude/include.
 
 Because this exclude list is not passed to the client it only applies on
 the server: that is, it excludes files received by a client when receiving
 from a server and files deleted on a server when sending to a server, but
-it doesn't exclude files sent from a client when sending to a server or
-files deleted on a client when receiving from a server.  
-
-Note that this option is not designed with strong security in
-mind, it is quite possible that a client may find a way to bypass this
-exclude list. If you want to absolutely ensure that certain files
-cannot be accessed then use the uid/gid options in combination with
-file permissions.
+it doesn't exclude files from being deleted on a client when receiving
+from a server.  
 
 dit(bf(exclude from)) The "exclude from" option specifies a filename
 on the server that contains exclude patterns, one per line.
 This is only superficially equivalent
-to the client specifying the --exclude-from option with an equivalent file.
+to the client specifying the bf(--exclude-from) option with an equivalent file.
 See the "exclude" option above.
 
-dit(bf(include)) The "include" option allows you to specify a space
-separated list of patterns which rsync should not exclude. This is
-only superficially equivalent to the client specifying these patterns
-with the --include option because it applies only on the server.
-This is useful as it
-allows you to build up quite complex exclude/include rules.  Only one
-"include" option may be specified, but you can use "+" and "-" before
-patterns to switch include/exclude.  See the "exclude" option above.
+dit(bf(include)) The "include" option allows you to specify a
+space-separated list of patterns which rsync should not exclude. This is
+only superficially equivalent to the client specifying these patterns with
+the bf(--include) option because it applies only on the server.  This is
+useful as it allows you to build up quite complex exclude/include rules.
+Only one "include" option may be specified, but you can use "+" and "-"
+before patterns to switch include/exclude.  See the "exclude" option
+above.
 
 dit(bf(include from)) The "include from" option specifies a filename
 on the server that contains include patterns, one per line. This is
 only superficially equivalent to the client specifying the
---include-from option with a equivalent file.
+bf(--include-from) option with a equivalent file.
 See the "exclude" option above.
 
 dit(bf(auth users)) The "auth users" option specifies a comma and
-space separated list of usernames that will be allowed to connect to
+space-separated list of usernames that will be allowed to connect to
 this module. The usernames do not need to exist on the local
 system. The usernames may also contain shell wildcard characters. If
 "auth users" is set then the client will be challenged to supply a
@@ -279,34 +306,32 @@ connection is rejected.
 
 Each pattern can be in one of five forms:
 
-itemize(
+quote(itemize(
   it() a dotted decimal IPv4 address of the form a.b.c.d, or an IPv6 address
   of the form a:b:c::d:e:f. In this case the incoming machine's IP address
   must match exactly.
-
   it() an address/mask in the form ipaddr/n where ipaddr is the IP address
   and n is the number of one bits in the netmask.  All IP addresses which
   match the masked IP address will be allowed in.
-
   it() an address/mask in the form ipaddr/maskaddr where ipaddr is the
   IP address and maskaddr is the netmask in dotted decimal notation for IPv4,
   or similar for IPv6, e.g. ffff:ffff:ffff:ffff:: instead of /64. All IP
   addresses which match the masked IP address will be allowed in.
-
   it() a hostname. The hostname as determined by a reverse lookup will
   be matched (case insensitive) against the pattern. Only an exact
   match is allowed in.
-
   it() a hostname pattern using wildcards. These are matched using the
   same rules as normal unix filename matching. If the pattern matches
   then the client is allowed in.
-)
+))
 
 Note IPv6 link-local addresses can have a scope in the address specification:
 
-quote(fe80::1%link1)
-quote(fe80::%link1/64)
-quote(fe80::%link1/ffff:ffff:ffff:ffff::)
+quote(
+tt(    fe80::1%link1)nl()
+tt(    fe80::%link1/64)nl()
+tt(    fe80::%link1/ffff:ffff:ffff:ffff::)nl()
+)
 
 You can also combine "hosts allow" with a separate "hosts deny"
 option. If both options are specified then the "hosts allow" option s
@@ -327,11 +352,11 @@ The default is no "hosts deny" option, which means all hosts can connect.
 
 dit(bf(ignore errors)) The "ignore errors" option tells rsyncd to
 ignore I/O errors on the server when deciding whether to run the delete
-phase of the transfer. Normally rsync skips the --delete step if any
-I/O errors have occurred in order to prevent disasterous deletion due
+phase of the transfer. Normally rsync skips the bf(--delete) step if any
+I/O errors have occurred in order to prevent disastrous deletion due
 to a temporary resource shortage or other I/O error. In some cases this
 test is counter productive so you can use this option to turn off this
-behaviour. 
+behavior. 
 
 dit(bf(ignore nonreadable)) This tells the rsync server to completely
 ignore files that are not readable by the user. This is useful for
@@ -340,23 +365,37 @@ directories, and the sysadmin doesn't want those files to be seen at all.
 
 dit(bf(transfer logging)) The "transfer logging" option enables per-file 
 logging of downloads and uploads in a format somewhat similar to that
-used by ftp daemons. If you want to customize the log formats look at
-the log format option.
+used by ftp daemons.  The server always logs the transfer at the end, so
+if a transfer is aborted, no mention will be made in the log file.
+
+If you want to customize the log lines, see the "log format" option.
 
 dit(bf(log format)) The "log format" option allows you to specify the
-format used for logging file transfers when transfer logging is
-enabled. The format is a text string containing embedded single
-character escape sequences prefixed with a percent (%) character.
+format used for logging file transfers when transfer logging is enabled.
+The format is a text string containing embedded single-character escape
+sequences prefixed with a percent (%) character.  An optional numeric
+field width may also be specified between the percent and the escape
+letter (e.g. "%-50n %8l %07p").
 
-The prefixes that are understood are:
+The default log format is "%o %h [%a] %m (%u) %f %l", and a "%t [%p] "
+is always prefixed when using the "log file" option.
+(A perl script that will summarize this default log format is included
+in the rsync source code distribution in the "support" subdirectory:
+rsyncstats.)
 
-itemize(
+The single-character escapes that are understood are as follows:
+
+quote(itemize(
   it() %h for the remote host name
   it() %a for the remote IP address
   it() %l for the length of the file in bytes
   it() %p for the process ID of this rsync session
-  it() %o for the operation, which is either "send" or "recv"
-  it() %f for the filename
+  it() %o for the operation, which is "send", "recv", or "del."
+  (the latter includes the trailing period)
+  it() %f for the filename (long form on sender; no trailing "/")
+  it() %n for the filename (short form; trailing "/" on dir)
+  it() %L either the string " -> SYMLINK", or " => HARDLINK" or an
+  empty string (where bf(SYMLINK) or bf(HARDLINK) is a filename)
   it() %P for the module path
   it() %m for the module name
   it() %t for the current date time
@@ -364,13 +403,15 @@ itemize(
   it() %b for the number of bytes actually transferred 
   it() %c when sending files this gives the number of checksum bytes
     received for this file
-)
+  it() %i an itemized list of what is being updated
+))
 
-The default log format is "%o %h [%a] %m (%u) %f %l", and a "%t [%p] "
-is always added to the beginning when using the "log file" option.
+For a list of what the characters mean that are output by "%i", see the
+bf(--itemize-changes) option in the rsync manpage.
 
-A perl script called rsyncstats to summarize this format is included
-in the rsync source code distribution.
+Note that some of the logged output changes when talking with older
+rsync versions.  For instance, deleted files were only output as verbose
+messages prior to rsync 2.6.4.
 
 dit(bf(timeout)) The "timeout" option allows you to override the
 clients choice for I/O timeout for this module. Using this option you
@@ -380,9 +421,22 @@ default. A good choice for anonymous rsync servers may be 600 (giving
 a 10 minute timeout).
 
 dit(bf(refuse options)) The "refuse options" option allows you to
-specify a space separated list of rsync command line options that will
-be refused by your rsync server.  The full names of the options must be
-used (i.e., you must use "checksum" not "c" to disable checksumming).  
+specify a space-separated list of rsync command line options that will
+be refused by your rsync server.
+You may specify the full option name, its one-letter abbreviation, or a
+wild-card string that matches multiple options.
+For example, this would refuse bf(--checksum) (bf(-c)) and all the various
+delete options:
+
+quote(tt(    refuse options = c delete))
+
+The reason the above refuses all delete options is that the options imply
+bf(--delete), and implied options are refused just like explicit options.
+As an additional safety feature, the refusal of "delete" also refuses
+bf(remove-sent-files) when the daemon is the sender; if you want the latter
+without the former, instead refuse "delete-*" -- that refuses all the
+delete modes without affecting bf(--remove-sent-files).
+
 When an option is refused, the server prints an error message and exits.
 To prevent all compression, you can use "dont compress = *" (see below)
 instead of "refuse options = compress" to avoid returning an error to a
@@ -394,11 +448,11 @@ during transfer. Compression is expensive in terms of CPU usage so it
 is usually good to not try to compress files that won't compress well,
 such as already compressed files. 
 
-The "dont compress" option takes a space separated list of
+The "dont compress" option takes a space-separated list of
 case-insensitive wildcard patterns. Any source filename matching one
 of the patterns will not be compressed during transfer.
 
-The default setting is verb(*.gz *.tgz *.zip *.z *.rpm *.deb *.iso *.bz2 *.tbz)
+The default setting is tt(*.gz *.tgz *.zip *.z *.rpm *.deb *.iso *.bz2 *.tbz)
 
 enddit()
 
@@ -421,7 +475,7 @@ encryption, but that is still being investigated.
 
 manpagesection(RUNNING AN RSYNC SERVER OVER A REMOTE SHELL PROGRAM)
 
-If rsync is run with both the --daemon and --rsh (-e) options, it will
+If rsync is run with both the bf(--daemon) and bf(--rsh) (bf(-e)) options, it will
 spawn an rsync daemon using a remote shell connection.  Several
 configuration options will not be available unless the remote user is
 root (e.g. chroot, setuid/setgid, etc.).  There is no need to configure
@@ -432,18 +486,18 @@ ADVANCED: To run an rsync server out of a single-use ssh key, use the
 "command=em(COMMAND)" syntax in the remote user's authorized_keys entry,
 where command would be
 
-quote(rsync --server --daemon .)
+quote(tt(rsync --server --daemon .))
 
 NOTE: rsync's argument parsing expects the trailing ".", so make sure
 that it's there.  If you want to use an rsyncd.conf(5)-style
 configuration file other than the default, you can added a
---config option to the em(command):
+bf(--config) option to the em(command):
 
-quote(rsync --server --daemon --config=em(file) .)
+quote(tt(rsync --server --daemon --config=em(file) .))
 
 Note that the "--server" here is the internal option that rsync uses to
 run the remote version of rsync that it communicates with, and thus you
-should not be using the --server option under normal circumstances.
+should not be using the bf(--server) option under normal circumstances.
 
 manpagesection(EXAMPLES)
 
@@ -456,17 +510,17 @@ verb(
         comment = ftp export area
 )
 
-
 A more sophisticated example would be:
 
-uid = nobody nl()
-gid = nobody nl()
-use chroot = no nl()
-max connections = 4 nl()
-syslog facility = local5 nl()
+verb(
+uid = nobody
+gid = nobody
+use chroot = no
+max connections = 4
+syslog facility = local5
 pid file = /var/run/rsyncd.pid
 
-verb([ftp]
+[ftp]
         path = /var/ftp/pub
         comment = whole ftp area (approx 6.1 GB)
 
@@ -491,8 +545,10 @@ verb([ftp]
 
 The /etc/rsyncd.secrets file would look something like this:
 
-tridge:mypass nl()
-susan:herpass
+quote(
+tt(tridge:mypass)nl()
+tt(susan:herpass)nl()
+)
 
 manpagefiles()
 
@@ -540,7 +596,8 @@ documentation!
 
 manpageauthor()
 
-rsync was written by Andrew Tridgell and Paul Mackerras.  They may be
-contacted via email at tridge@samba.org and
-Paul.Mackerras@cs.anu.edu.au
+rsync was written by Andrew Tridgell and Paul Mackerras.
+Many people have later contributed to it.
 
+Mailing lists for support and development are available at
+url(http://lists.samba.org)(lists.samba.org) 

runtests.sh

@@ -126,12 +126,10 @@ set -e
 RUNSHFLAGS='-e'
 
 # for Solaris
-PATH="/usr/xpg4/bin/:$PATH"
+[ -d /usr/xpg4/bin ] && PATH="/usr/xpg4/bin/:$PATH"
 
-if [ -n "$loglevel" ] && [ "$loglevel" -gt 8 ]
-then
-    if set -x
-    then
+if [ "x$loglevel" != x ] && [ "$loglevel" -gt 8 ]; then
+    if set -x; then
 	# If it doesn't work the first time, don't keep trying.
 	RUNSHFLAGS="$RUNSHFLAGS -x"
     fi
@@ -142,33 +140,39 @@ echo "$0 running in `pwd`"
 echo "    rsync_bin=$rsync_bin"
 echo "    srcdir=$srcdir"
 
-testuser=`id -un || whoami || echo UNKNOWN`
+if [ -f /usr/bin/whoami ]; then
+    testuser=`/usr/bin/whoami`
+elif [ -f /usr/ucb/whoami ]; then
+    testuser=`/usr/ucb/whoami`
+elif [ -f /bin/whoami ]; then
+    testuser=`/bin/whoami`
+else
+    testuser=`id -un 2>/dev/null || echo ${LOGNAME:-${USERNAME:-${USER:-'UNKNOWN'}}}`
+fi
 
 echo "    testuser=$testuser"
 echo "    os=`uname -a`"
 
 # It must be "yes", not just nonnull
-if test "x$preserve_scratch" = xyes
-then
+if [ "x$preserve_scratch" = xyes ]; then
     echo "    preserve_scratch=yes"
 else
     echo "    preserve_scratch=no"
 fi    
 
 
-if test ! -f $rsync_bin
-then
+if [ ! -f "$rsync_bin" ]; then
     echo "rsync_bin $rsync_bin is not a file" >&2
     exit 2
 fi
 
-if test ! -d $srcdir
-then
+if [ ! -d "$srcdir" ]; then
     echo "srcdir $srcdir is not a directory" >&2
     exit 2
 fi
 
 RSYNC="$rsync_bin"
+#RSYNC="valgrind --tool=addrcheck $rsync_bin"
 
 export rsync_bin RSYNC
 
@@ -198,14 +202,13 @@ maybe_discard_scratch() {
     return 0
 }
 
-if [ "x$whichtests" = x ]
-then
+if [ "x$whichtests" = x ]; then
     whichtests="*.test"
 fi
 
 for testscript in $suitedir/$whichtests
 do
-    testbase=`echo $testscript | sed 's!.*/!!' | sed -e 's/.test\$//'`
+    testbase=`echo $testscript | sed -e 's!.*/!!' -e 's/.test\$//'`
     scratchdir="$scratchbase.$testbase"
 
     prep_scratch
@@ -250,8 +253,7 @@ do
     *)
 	echo "FAIL    $testbase"
 	failed=`expr $failed + 1`
-	if [ "x$nopersist" = "xyes" ]
-	then
+	if [ "x$nopersist" = xyes ]; then
 	    exit 1
 	fi
     esac

sender.c

@@ -20,13 +20,23 @@
 #include "rsync.h"
 
 extern int verbose;
-extern int csum_length;
-extern struct stats stats;
-extern int io_error;
 extern int dry_run;
 extern int am_server;
 extern int am_daemon;
+extern int log_before_transfer;
+extern int log_format_has_i;
+extern int daemon_log_format_has_i;
+extern int csum_length;
+extern int io_error;
 extern int protocol_version;
+extern int remove_sent_files;
+extern int updating_basis_file;
+extern int make_backups;
+extern int do_progress;
+extern int inplace;
+extern struct stats stats;
+extern struct file_list *the_file_list;
+extern char *log_format;
 
 
 /**
@@ -36,22 +46,6 @@ extern int protocol_version;
  * and transmits them to the receiver.  The sender process runs on the
  * machine holding the source files.
  **/
-void read_sum_head(int f, struct sum_struct *sum)
-{
-	sum->count = read_int(f);
-	sum->blength = read_int(f);
-	if (protocol_version < 27) {
-		sum->s2length = csum_length;
-	} else {
-		sum->s2length = read_int(f);
-		if (sum->s2length > MD4_SUM_LENGTH) {
-			rprintf(FERROR, "Invalid checksum length %ld\n",
-			    (long)sum->s2length);
-			exit_cleanup(RERR_PROTOCOL);
-		}
-	}
-	sum->remainder = read_int(f);
-}
 
 /**
  * Receive the checksums for a buffer
@@ -59,44 +53,46 @@ void read_sum_head(int f, struct sum_struct *sum)
 static struct sum_struct *receive_sums(int f)
 {
 	struct sum_struct *s;
-	int i;
+	int32 i;
 	OFF_T offset = 0;
 
-	s = new(struct sum_struct);
-	if (!s) out_of_memory("receive_sums");
+	if (!(s = new(struct sum_struct)))
+		out_of_memory("receive_sums");
 
 	read_sum_head(f, s);
 
 	s->sums = NULL;
 
 	if (verbose > 3) {
-		rprintf(FINFO, "count=%ld n=%u rem=%u\n",
-			(long)s->count, s->blength, s->remainder);
+		rprintf(FINFO, "count=%.0f n=%ld rem=%ld\n",
+			(double)s->count, (long)s->blength, (long)s->remainder);
 	}
 
 	if (s->count == 0)
 		return(s);
 
-	s->sums = new_array(struct sum_buf, s->count);
-	if (!s->sums) out_of_memory("receive_sums");
+	if (!(s->sums = new_array(struct sum_buf, s->count)))
+		out_of_memory("receive_sums");
 
-	for (i = 0; i < (int) s->count; i++) {
+	for (i = 0; i < s->count; i++) {
 		s->sums[i].sum1 = read_int(f);
 		read_buf(f, s->sums[i].sum2, s->s2length);
 
 		s->sums[i].offset = offset;
-		s->sums[i].i = i;
+		s->sums[i].flags = 0;
 
-		if (i == (int) s->count-1 && s->remainder != 0) {
+		if (i == s->count-1 && s->remainder != 0)
 			s->sums[i].len = s->remainder;
-		} else {
+		else
 			s->sums[i].len = s->blength;
-		}
 		offset += s->sums[i].len;
 
-		if (verbose > 3)
-			rprintf(FINFO, "chunk[%d] len=%d offset=%.0f sum1=%08x\n",
-				i, s->sums[i].len, (double)s->sums[i].offset, s->sums[i].sum1);
+		if (verbose > 3) {
+			rprintf(FINFO,
+				"chunk[%d] len=%d offset=%.0f sum1=%08x\n",
+				i, s->sums[i].len, (double)s->sums[i].offset,
+				s->sums[i].sum1);
+		}
 	}
 
 	s->flength = offset;
@@ -104,27 +100,115 @@ static struct sum_struct *receive_sums(int f)
 	return s;
 }
 
+void successful_send(int ndx)
+{
+	char fname[MAXPATHLEN];
+	struct file_struct *file;
+	unsigned int offset;
 
+	if (ndx < 0 || ndx >= the_file_list->count)
+		return;
+
+	file = the_file_list->files[ndx];
+	/* The generator might tell us about symlinks we didn't send. */
+	if (!(file->flags & FLAG_SENT) && !S_ISLNK(file->mode))
+		return;
+	if (file->dir.root) {
+		offset = stringjoin(fname, sizeof fname,
+				    file->dir.root, "/", NULL);
+	} else
+		offset = 0;
+	f_name_to(file, fname + offset);
+	if (remove_sent_files && do_unlink(fname) == 0 && verbose > 1) {
+		rprintf(FINFO, "sender removed %s\n",
+			safe_fname(fname + offset));
+	}
+}
+
+static void write_ndx_and_attrs(int f_out, int ndx, int iflags,
+				uchar fnamecmp_type, char *buf, int len)
+{
+	write_int(f_out, ndx);
+	if (protocol_version < 29)
+		return;
+	write_shortint(f_out, iflags);
+	if (iflags & ITEM_BASIS_TYPE_FOLLOWS)
+		write_byte(f_out, fnamecmp_type);
+	if (iflags & ITEM_XNAME_FOLLOWS)
+		write_vstring(f_out, buf, len);
+}
+
+/* This is also used by receive.c with f_out = -1. */
+int read_item_attrs(int f_in, int f_out, int ndx, uchar *type_ptr,
+		    char *buf, int *len_ptr)
+{
+	int len;
+	uchar fnamecmp_type = FNAMECMP_FNAME;
+	int iflags = protocol_version >= 29 ? read_shortint(f_in)
+		   : ITEM_TRANSFER | ITEM_MISSING_DATA;
+
+	/* Handle the new keep-alive (no-op) packet. */
+	if (ndx == the_file_list->count && iflags == ITEM_IS_NEW)
+		;
+	else if (ndx < 0 || ndx >= the_file_list->count) {
+		rprintf(FERROR, "Invalid file index: %d (count=%d) [%s]\n",
+			ndx, the_file_list->count, who_am_i());
+		exit_cleanup(RERR_PROTOCOL);
+	} else if (iflags == ITEM_IS_NEW) {
+		rprintf(FERROR, "Invalid itemized flag word: %x [%s]\n",
+			iflags, who_am_i());
+		exit_cleanup(RERR_PROTOCOL);
+	}
+
+	if (iflags & ITEM_BASIS_TYPE_FOLLOWS)
+		fnamecmp_type = read_byte(f_in);
+	*type_ptr = fnamecmp_type;
+
+	if (iflags & ITEM_XNAME_FOLLOWS) {
+		if ((len = read_vstring(f_in, buf, MAXPATHLEN)) < 0)
+			exit_cleanup(RERR_PROTOCOL);
+	} else {
+		*buf = '\0';
+		len = -1;
+	}
+	*len_ptr = len;
+
+	/* Temporary handling of 2.6.4pre3 */
+	if (iflags & ITEM_DUMMY_BIT && iflags & (ITEM_LOCAL_CHANGE|ITEM_TRANSFER))
+		iflags &= ~ITEM_DUMMY_BIT;
+
+	if (iflags & ITEM_TRANSFER) {
+		if (!S_ISREG(the_file_list->files[ndx]->mode)) {
+			rprintf(FERROR,
+				"received request to transfer non-regular file: %d [%s]\n",
+				ndx, who_am_i());
+			exit_cleanup(RERR_PROTOCOL);
+		}
+	} else if (f_out >= 0) {
+		write_ndx_and_attrs(f_out, ndx, iflags,
+				    fnamecmp_type, buf, len);
+	}
+
+	return iflags;
+}
 
 void send_files(struct file_list *flist, int f_out, int f_in)
 {
 	int fd = -1;
 	struct sum_struct *s;
-	struct map_struct *buf = NULL;
+	struct map_struct *mbuf = NULL;
 	STRUCT_STAT st;
-	char fname[MAXPATHLEN];
-	int i;
+	char *fname2, fname[MAXPATHLEN];
+	char xname[MAXPATHLEN];
+	uchar fnamecmp_type;
+	int iflags, xlen;
 	struct file_struct *file;
-	int phase = 0;
-	extern struct stats stats;
+	int phase = 0, max_phase = protocol_version >= 29 ? 2 : 1;
 	struct stats initial_stats;
-	extern int write_batch;
-	extern int read_batch;
-	int checksums_match;
-	int buff_len;
-	char buff[CHUNK_SIZE];
-	int j;
-	int done;
+	int save_make_backups = make_backups;
+	int itemizing = am_daemon ? daemon_log_format_has_i
+		      : !am_server && log_format_has_i;
+	int i, j;
 
 	if (verbose > 2)
 		rprintf(FINFO, "send_files starting\n");
@@ -134,175 +218,154 @@ void send_files(struct file_list *flist, int f_out, int f_in)
 
 		i = read_int(f_in);
 		if (i == -1) {
-			if (phase == 0) {
-				phase++;
-				csum_length = SUM_LENGTH;
-				write_int(f_out, -1);
-				if (verbose > 2)
-					rprintf(FINFO, "send_files phase=%d\n", phase);
-				continue;
-			}
-			break;
+			if (++phase > max_phase)
+				break;
+			csum_length = SUM_LENGTH;
+			if (verbose > 2)
+				rprintf(FINFO, "send_files phase=%d\n", phase);
+			write_int(f_out, -1);
+			/* For inplace: redo phase turns off the backup
+			 * flag so that we do a regular inplace send. */
+			make_backups = 0;
+			continue;
 		}
 
-		if (i < 0 || i >= flist->count) {
-			rprintf(FERROR, "Invalid file index %d (count=%d)\n",
-				i, flist->count);
+		iflags = read_item_attrs(f_in, f_out, i, &fnamecmp_type,
+					 xname, &xlen);
+		if (iflags == ITEM_IS_NEW) /* no-op packet */
+			continue;
+
+		file = flist->files[i];
+		if (file->dir.root) {
+			/* N.B. We're sure that this fits, so offset is OK. */
+			offset = strlcpy(fname, file->dir.root, sizeof fname);
+			if (!offset || fname[offset-1] != '/')
+				fname[offset++] = '/';
+		} else
+			offset = 0;
+		fname2 = f_name_to(file, fname + offset);
+
+		if (verbose > 2)
+			rprintf(FINFO, "send_files(%d, %s)\n", i, fname);
+
+		if (!(iflags & ITEM_TRANSFER)) {
+			maybe_log_item(file, iflags, itemizing, xname);
+			continue;
+		}
+		if (phase == 2) {
+			rprintf(FERROR,
+				"got transfer request in phase 2 [%s]\n",
+				who_am_i());
 			exit_cleanup(RERR_PROTOCOL);
 		}
 
-		file = flist->files[i];
+		updating_basis_file = inplace && (protocol_version >= 29
+			? fnamecmp_type == FNAMECMP_FNAME : !make_backups);
 
 		stats.current_file_index = i;
 		stats.num_transferred_files++;
 		stats.total_transferred_size += file->length;
 
-		if (file->basedir) {
-			/* N.B. We're sure that this fits, so offset is OK. */
-			offset = strlcpy(fname, file->basedir, sizeof fname);
-			if (!offset || fname[offset-1] != '/')
-				fname[offset++] = '/';
-		} else
-			offset = 0;
-		f_name_to(file, fname + offset);
-
-		if (verbose > 2)
-			rprintf(FINFO, "send_files(%d, %s)\n", i, fname);
-
-		if (dry_run) {
-			if (!am_server && verbose) {	/* log transfer */
-				rprintf(FINFO, "%s\n", fname+offset);
-			}
-			write_int(f_out, i);
+		if (dry_run) { /* log the transfer */
+			if (!am_server && log_format)
+				log_item(file, &stats, iflags, NULL);
+			write_ndx_and_attrs(f_out, i, iflags, fnamecmp_type,
+					    xname, xlen);
 			continue;
 		}
 
 		initial_stats = stats;
 
-		s = receive_sums(f_in);
-		if (!s) {
+		if (!(s = receive_sums(f_in))) {
 			io_error |= IOERR_GENERAL;
 			rprintf(FERROR, "receive_sums failed\n");
 			return;
 		}
 
-		if (write_batch)
-			write_batch_csum_info(&i, s);
-
-		if (!read_batch) {
-			fd = do_open(fname, O_RDONLY, 0);
-			if (fd == -1) {
-				if (errno == ENOENT) {
-					enum logcode c = am_daemon
-					    && protocol_version < 28 ? FERROR
-								     : FINFO;
-					io_error |= IOERR_VANISHED;
-					rprintf(c, "file has vanished: %s\n",
-						full_fname(fname));
-				} else {
-					io_error |= IOERR_GENERAL;
-					rprintf(FERROR, "send_files failed to open %s: %s\n",
-						full_fname(fname), strerror(errno));
-				}
-				free_sums(s);
-				continue;
-			}
-
-			/* map the local file */
-			if (do_fstat(fd, &st) != 0) {
-				io_error |= IOERR_GENERAL;
-				rprintf(FERROR, "fstat failed: %s\n", strerror(errno));
-				free_sums(s);
-				close(fd);
-				return;
-			}
-
-			if (st.st_size > 0) {
-				buf = map_file(fd, st.st_size);
+		fd = do_open(fname, O_RDONLY, 0);
+		if (fd == -1) {
+			if (errno == ENOENT) {
+				enum logcode c = am_daemon
+				    && protocol_version < 28 ? FERROR
+							     : FINFO;
+				io_error |= IOERR_VANISHED;
+				rprintf(c, "file has vanished: %s\n",
+					full_fname(fname));
 			} else {
-				buf = NULL;
+				io_error |= IOERR_GENERAL;
+				rsyserr(FERROR, errno,
+					"send_files failed to open %s",
+					full_fname(fname));
 			}
-
-			if (verbose > 2)
-				rprintf(FINFO, "send_files mapped %s of size %.0f\n",
-					fname, (double)st.st_size);
-
-			write_int(f_out, i);
-
-			if (write_batch)
-				write_batch_delta_file((char *)&i, sizeof i);
-
-			write_sum_head(f_out, s);
+			free_sums(s);
+			continue;
 		}
 
-		if (verbose > 2 && !read_batch)
-			rprintf(FINFO, "calling match_sums %s\n", fname);
-
-		if (!am_server && verbose) {	/* log transfer */
-			rprintf(FINFO, "%s\n", fname+offset);
+		/* map the local file */
+		if (do_fstat(fd, &st) != 0) {
+			io_error |= IOERR_GENERAL;
+			rsyserr(FERROR, errno, "fstat failed");
+			free_sums(s);
+			close(fd);
+			return;
 		}
 
+		if (st.st_size) {
+			int32 read_size = MAX(s->blength * 3, MAX_MAP_SIZE);
+			mbuf = map_file(fd, st.st_size, read_size, s->blength);
+		} else
+			mbuf = NULL;
+
+		if (verbose > 2) {
+			rprintf(FINFO, "send_files mapped %s of size %.0f\n",
+				safe_fname(fname), (double)st.st_size);
+		}
+
+		write_ndx_and_attrs(f_out, i, iflags, fnamecmp_type,
+				    xname, xlen);
+		write_sum_head(f_out, s);
+
+		if (verbose > 2) {
+			rprintf(FINFO, "calling match_sums %s\n",
+				safe_fname(fname));
+		}
+
+		if (log_before_transfer)
+			log_item(file, &initial_stats, iflags, NULL);
+		else if (!am_server && verbose && do_progress)
+			rprintf(FINFO, "%s\n", safe_fname(fname2));
+
 		set_compression(fname);
 
-		if (read_batch) {
-			/* read checksums originally computed on sender side */
-			read_batch_csum_info(i, s, &checksums_match);
-			if (checksums_match) {
-				read_batch_delta_file((char*)&j, sizeof (int));
-				if (j != i) {    /* if flist index entries don't match*/
-					rprintf(FINFO, "index mismatch in send_files\n");
-					rprintf(FINFO, "read index = %d flist ndx = %d\n", j, i);
-					close_batch_delta_file();
-					close_batch_csums_file();
-					exit_cleanup(1);
-				} else {
-					write_int(f_out, j);
-					write_sum_head(f_out, s);
-					done = 0;
-					while (!done) {
-						read_batch_delta_file((char*)&buff_len, sizeof (int));
-						write_int(f_out, buff_len);
-						if (buff_len == 0) {
-							done = 1;
-						} else {
-							if (buff_len > 0) {
-								read_batch_delta_file(buff, buff_len);
-								write_buf(f_out, buff, buff_len);
-							}
-						}
-					}  /* end while  */
-					read_batch_delta_file( buff, MD4_SUM_LENGTH);
-					write_buf(f_out, buff, MD4_SUM_LENGTH);
+		match_sums(f_out, s, mbuf, st.st_size);
+		if (do_progress)
+			end_progress(st.st_size);
 
-				}  /* j=i */
-			} else {  /* not checksum match */
-				rprintf (FINFO, "readbatch & checksums don't match\n");
-				rprintf (FINFO, "filename=%s is being skipped\n", fname);
-				continue;
-			}
-		} else  {
-			match_sums(f_out, s, buf, st.st_size);
-			log_send(file, &initial_stats);
-		}
+		if (!log_before_transfer)
+			log_item(file, &initial_stats, iflags, NULL);
 
-		if (!read_batch) {
-			if (buf) {
-				j = unmap_file(buf);
-				if (j) {
-					io_error |= IOERR_GENERAL;
-					rprintf(FERROR,
-					    "read errors mapping %s: (%d) %s\n",
-					    full_fname(fname), j, strerror(j));
-				}
+		if (mbuf) {
+			j = unmap_file(mbuf);
+			if (j) {
+				io_error |= IOERR_GENERAL;
+				rsyserr(FERROR, j,
+					"read errors mapping %s",
+					full_fname(fname));
 			}
-			close(fd);
 		}
+		close(fd);
 
 		free_sums(s);
 
-		if (verbose > 2)
-			rprintf(FINFO, "sender finished %s\n", fname);
+		if (verbose > 2) {
+			rprintf(FINFO, "sender finished %s\n",
+				safe_fname(fname));
+		}
+
+		/* Flag that we actually sent this entry. */
+		file->flags |= FLAG_SENT;
 	}
+	make_backups = save_make_backups;
 
 	if (verbose > 2)
 		rprintf(FINFO, "send files finished\n");
@@ -310,14 +373,4 @@ void send_files(struct file_list *flist, int f_out, int f_in)
 	match_report();
 
 	write_int(f_out, -1);
-	if (write_batch || read_batch) {
-		close_batch_csums_file();
-		close_batch_delta_file();
-	}
-
 }
-
-
-
-
-

socket.c

@@ -33,6 +33,8 @@
 
 #include "rsync.h"
 
+extern char *bind_address;
+extern int default_af_hint;
 
 /**
  * Establish a proxy connection on an open socket to a web proxy by
@@ -69,15 +71,13 @@ static int establish_proxy_connection(int fd, char *host, int port,
 		 host, port, authhdr, authbuf);
 	len = strlen(buffer);
 	if (write(fd, buffer, len) != len) {
-		rprintf(FERROR, "failed to write to proxy: %s\n",
-			strerror(errno));
+		rsyserr(FERROR, errno, "failed to write to proxy");
 		return -1;
 	}
 
 	for (cp = buffer; cp < &buffer[sizeof buffer - 1]; cp++) {
 		if (read(fd, cp, 1) != 1) {
-			rprintf(FERROR, "failed to read from proxy: %s\n",
-				strerror(errno));
+			rsyserr(FERROR, errno, "failed to read from proxy");
 			return -1;
 		}
 		if (*cp == '\n')
@@ -90,7 +90,7 @@ static int establish_proxy_connection(int fd, char *host, int port,
 	if (*cp == '\r')
 		*cp = '\0';
 	if (strncmp(buffer, "HTTP/", 5) != 0) {
-		rprintf(FERROR, "bad response from proxy - %s\n",
+		rprintf(FERROR, "bad response from proxy -- %s\n",
 			buffer);
 		return -1;
 	}
@@ -98,7 +98,7 @@ static int establish_proxy_connection(int fd, char *host, int port,
 	while (*cp == ' ')
 		cp++;
 	if (*cp != '2') {
-		rprintf(FERROR, "bad response from proxy - %s\n",
+		rprintf(FERROR, "bad response from proxy -- %s\n",
 			buffer);
 		return -1;
 	}
@@ -106,8 +106,8 @@ static int establish_proxy_connection(int fd, char *host, int port,
 	while (1) {
 		for (cp = buffer; cp < &buffer[sizeof buffer - 1]; cp++) {
 			if (read(fd, cp, 1) != 1) {
-				rprintf(FERROR, "failed to read from proxy: %s\n",
-					strerror(errno));
+				rsyserr(FERROR, errno,
+					"failed to read from proxy");
 				return -1;
 			}
 			if (*cp == '\n')
@@ -198,7 +198,7 @@ int open_socket_out(char *host, int port, const char *bind_address,
 		strlcpy(buffer, h, sizeof buffer);
 
 		/* Is the USER:PASS@ prefix present? */
-		if ((cp = strchr(buffer, '@')) != NULL) {
+		if ((cp = strrchr(buffer, '@')) != NULL) {
 			*cp++ = '\0';
 			/* The remainder is the HOST:PORT part. */
 			h = cp;
@@ -276,8 +276,7 @@ int open_socket_out(char *host, int port, const char *bind_address,
 	}
 	freeaddrinfo(res0);
 	if (s < 0) {
-		rprintf(FERROR, RSYNC_NAME ": failed to connect to %s: %s\n",
-			h, strerror(errno));
+		rsyserr(FERROR, errno, "failed to connect to %s", h);
 		return -1;
 	}
 	return s;
@@ -314,19 +313,14 @@ int open_socket_out_wrapped(char *host, int port, const char *bind_address,
 
 
 /**
- * Open a socket of the specified type, port and address for incoming data
+ * Open one or more sockets for incoming data using the specified type,
+ * port, and address.
  *
- * Try to be better about handling the results of getaddrinfo(): when
- * opening an inbound socket, we might get several address results,
- * e.g. for the machine's ipv4 and ipv6 name.
+ * The getaddrinfo() call may return several address results, e.g. for
+ * the machine's IPv4 and IPv6 name.
  *
- * If binding a wildcard, then any one of them should do.  If an address
- * was specified but it's insufficiently specific then that's not our
- * fault.
- *
- * However, some of the advertized addresses may not work because e.g. we
- * don't have IPv6 support in the kernel.  In that case go on and try all
- * addresses until one succeeds.
+ * We return an array of file-descriptors to the sockets, with a trailing
+ * -1 value to indicate the end of the list.
  *
  * @param bind_address Local address to bind, or NULL to allow it to
  * default.
@@ -334,8 +328,8 @@ int open_socket_out_wrapped(char *host, int port, const char *bind_address,
 static int *open_socket_in(int type, int port, const char *bind_address,
 			   int af_hint)
 {
-	int one=1;
-	int s, *sp, *socks, maxs;
+	int one = 1;
+	int s, *socks, maxs, i;
 	struct addrinfo hints, *all_ai, *resp;
 	char portbuf[10];
 	int error;
@@ -354,18 +348,14 @@ static int *open_socket_in(int type, int port, const char *bind_address,
 
 	/* Count max number of sockets we might open. */
 	for (maxs = 0, resp = all_ai; resp; resp = resp->ai_next, maxs++) {}
-	socks = new_array(int, maxs + 1);
-	if (!socks) {
-		rprintf(FERROR,
-			RSYNC_NAME "couldn't allocate memory for sockets");
-		return NULL;
-	}
+
+	if (!(socks = new_array(int, maxs + 1)))
+		out_of_memory("open_socket_in");
 
 	/* We may not be able to create the socket, if for example the
 	 * machine knows about IPv6 in the C library, but not in the
 	 * kernel. */
-	sp = socks + 1; /* Leave room for count at start of array. */
-	for (resp = all_ai; resp; resp = resp->ai_next) {
+	for (resp = all_ai, i = 0; resp; resp = resp->ai_next) {
 		s = socket(resp->ai_family, resp->ai_socktype,
 			   resp->ai_protocol);
 
@@ -379,8 +369,12 @@ static int *open_socket_in(int type, int port, const char *bind_address,
 
 #ifdef IPV6_V6ONLY
 		if (resp->ai_family == AF_INET6) {
-			setsockopt(s, IPPROTO_IPV6, IPV6_V6ONLY,
-				   (char *)&one, sizeof one);
+			if (setsockopt(s, IPPROTO_IPV6, IPV6_V6ONLY,
+				       (char *)&one, sizeof one) < 0
+			    && default_af_hint != AF_INET6) {
+				close(s);
+				continue;
+			}
 		}
 #endif
 
@@ -391,17 +385,17 @@ static int *open_socket_in(int type, int port, const char *bind_address,
 			continue;
 		}
 
-		*sp++ = s;
+		socks[i++] = s;
 	}
-	*socks = sp - socks - 1;   /* Save count. */
+	socks[i] = -1;
 
 	if (all_ai)
 		freeaddrinfo(all_ai);
 
-	if (*socks == 0) {
+	if (!i) {
 		rprintf(FERROR,
-			RSYNC_NAME ": open inbound socket on port %d failed: "
-			"%s\n", port, strerror(errno));
+			"unable to bind any inbound sockets on port %d\n",
+			port);
 		free(socks);
 		return NULL;
 	}
@@ -446,9 +440,7 @@ static RETSIGTYPE sigchld_handler(UNUSED(int val))
 void start_accept_loop(int port, int (*fn)(int, int))
 {
 	fd_set deffds;
-	int *sp, maxfd, i, j;
-	extern char *bind_address;
-	extern int default_af_hint;
+	int *sp, maxfd, i;
 
 	/* open an incoming socket */
 	sp = open_socket_in(SOCK_STREAM, port, bind_address, default_af_hint);
@@ -457,12 +449,15 @@ void start_accept_loop(int port, int (*fn)(int, int))
 
 	/* ready to listen */
 	FD_ZERO(&deffds);
-	maxfd = -1;
-	for (i = 1; i <= *sp; i++) {
-		if (listen(sp[i], 5) == -1) {
-			for (j = 1; j <= i; j++)
-				close(sp[j]);
-			free(sp);
+	for (i = 0, maxfd = -1; sp[i] >= 0; i++) {
+		if (listen(sp[i], 5) < 0) {
+			rsyserr(FERROR, errno, "listen() on socket failed");
+#ifdef INET6
+			if (errno == EADDRINUSE && i > 0) {
+				rprintf(FINFO,
+				    "Try using --ipv4 or --ipv6 to avoid this listen() error.\n");
+			}
+#endif
 			exit_cleanup(RERR_SOCKETIO);
 		}
 		FD_SET(sp[i], &deffds);
@@ -494,8 +489,7 @@ void start_accept_loop(int port, int (*fn)(int, int))
 		if (select(maxfd + 1, &fds, NULL, NULL, NULL) != 1)
 			continue;
 
-		fd = -1;
-		for (i = 1; i <= *sp; i++) {
+		for (i = 0, fd = -1; sp[i] >= 0; i++) {
 			if (FD_ISSET(sp[i], &fds)) {
 				fd = accept(sp[i], (struct sockaddr *)&addr,
 					    &addrlen);
@@ -510,18 +504,17 @@ void start_accept_loop(int port, int (*fn)(int, int))
 
 		if ((pid = fork()) == 0) {
 			int ret;
-			close(sp[i]);
-			/* open log file in child before possibly giving
-			 * up privileges  */
+			for (i = 0; sp[i] >= 0; i++)
+				close(sp[i]);
+			/* Re-open log file in child before possibly giving
+			 * up privileges (see log_close() above). */
 			log_open();
 			ret = fn(fd, fd);
 			close_all();
 			_exit(ret);
 		} else if (pid < 0) {
-			rprintf(FERROR,
-				RSYNC_NAME
-				": could not create child server process: %s\n",
-				strerror(errno));
+			rsyserr(FERROR, errno,
+				"could not create child server process");
 			close(fd);
 			/* This might have happened because we're
 			 * overloaded.  Sleep briefly before trying to
@@ -532,7 +525,6 @@ void start_accept_loop(int port, int (*fn)(int, int))
 			close(fd);
 		}
 	}
-	free(sp);
 }
 
 
@@ -627,7 +619,7 @@ void set_socket_options(int fd, char *options)
 
 		case OPT_ON:
 			if (got_value)
-				rprintf(FERROR,"syntax error - %s does not take a value\n",tok);
+				rprintf(FERROR,"syntax error -- %s does not take a value\n",tok);
 
 			{
 				int on = socket_options[i].value;
@@ -638,9 +630,10 @@ void set_socket_options(int fd, char *options)
 			break;
 		}
 
-		if (ret != 0)
-			rprintf(FERROR, "failed to set socket option %s: %s\n", tok,
-				strerror(errno));
+		if (ret != 0) {
+			rsyserr(FERROR, errno,
+				"failed to set socket option %s", tok);
+		}
 	}
 
 	free(options);
@@ -660,14 +653,12 @@ void become_daemon(void)
 	/* detach from the terminal */
 #ifdef HAVE_SETSID
 	setsid();
-#else
-#ifdef TIOCNOTTY
+#elif defined TIOCNOTTY
 	i = open("/dev/tty", O_RDWR);
 	if (i >= 0) {
 		ioctl(i, (int)TIOCNOTTY, (char *)0);
 		close(i);
 	}
-#endif /* TIOCNOTTY */
 #endif
 	/* make sure that stdin, stdout an stderr don't stuff things
 	 * up (library functions, for example) */
@@ -703,7 +694,7 @@ static int socketpair_tcp(int fd[2])
 		goto failed;
 
 	memset(&sock2, 0, sizeof sock2);
-#if HAVE_SOCKADDR_IN_LEN
+#ifdef HAVE_SOCKADDR_IN_LEN
 	sock2.sin_len = sizeof sock2;
 #endif
 	sock2.sin_family = PF_INET;
@@ -733,14 +724,16 @@ static int socketpair_tcp(int fd[2])
 		goto failed;
 
 	close(listener);
+	listener = -1;
+
+	set_blocking(fd[1]);
+
 	if (connect_done == 0) {
 		if (connect(fd[1], (struct sockaddr *)&sock, sizeof sock) != 0
 		    && errno != EISCONN)
 			goto failed;
 	}
 
-	set_blocking(fd[1]);
-
 	/* all OK! */
 	return 0;
 
@@ -770,8 +763,7 @@ int sock_exec(const char *prog)
 	int fd[2];
 
 	if (socketpair_tcp(fd) != 0) {
-		rprintf(FERROR, RSYNC_NAME ": socketpair_tcp failed (%s)\n",
-			strerror(errno));
+		rsyserr(FERROR, errno, "socketpair_tcp failed");
 		return -1;
 	}
 	if (verbose >= 2)

support/Makefile

@@ -0,0 +1,6 @@
+all: savetransfer
+
+savetransfer: savetransfer.o
+
+clean:
+	rm -f *.o savetransfer

support/atomic-rsync

@@ -0,0 +1,90 @@
+#!/usr/bin/perl
+#
+# This script lets you update a hierarchy of files in an atomic way by
+# first creating a new hierarchy using --link-dest to rsync, and then
+# swapping the hierarchy into place.  See the usage message for more
+# details and some important caveats!
+
+use strict;
+use Cwd 'abs_path';
+
+my $RSYNC_PROG = '/usr/bin/rsync';
+my $RM_PROG = '/bin/rm';
+
+my $dest_dir = $ARGV[-1];
+usage(1) if $dest_dir eq '' || $dest_dir =~ /^--/;
+
+if (!-d $dest_dir) {
+    print STDERR "$dest_dir is not a directory.\n\n";
+    usage(1);
+}
+
+if (@_ = grep(/^--(link|compare)-dest/, @ARGV)) {
+    $_ = join(' or ', @_);
+    print STDERR "You may not use $_ as an rsync option.\n\n";
+    usage(1);
+}
+
+$dest_dir = abs_path($dest_dir);
+if ($dest_dir eq '/') {
+    print STDERR 'You must not use "/" as the destination directory.', "\n\n";
+    usage(1);
+}
+
+my $old_dir = "$dest_dir~old~";
+my $new_dir = $ARGV[-1] = "$dest_dir~new~";
+
+system($RM_PROG, '-rf', $old_dir) if -d $old_dir;
+
+if (system($RSYNC_PROG, "--link-dest=$dest_dir", @ARGV)) {
+    if ($? == -1) {
+	print "failed to execute $RSYNC_PROG: $!\n";
+    } elsif ($? & 127) {
+	printf "child died with signal %d, %s coredump\n",
+	    ($? & 127),  ($? & 128) ? 'with' : 'without';
+    } else {
+	printf "child exited with value %d\n", $? >> 8;
+    }
+    exit $?;
+}
+
+rename($dest_dir, $old_dir) or die "Unable to rename $new_dir to $old_dir: $!";
+rename($new_dir, $dest_dir) or die "Unable to rename $new_dir to $dest_dir: $!";
+
+exit;
+
+
+sub usage
+{
+    my($ret) = @_;
+    my $fh = $ret ? *STDERR : *STDOUT;
+    print $fh <<EOT;
+Usage: atomic-rsync [RSYNC-OPTIONS] HOST:/SOURCE/DIR/ /DEST/DIR/
+       atomic-rsync [RSYNC-OPTIONS] HOST::MOD/DIR/ /DEST/DIR/
+
+This script lets you update a hierarchy of files in an atomic way by first
+creating a new hierarchy (using hard-links to leverage the existing files),
+and then swapping the new hierarchy into place.  You must be pulling files
+to a local directory, and that directory must already exist.  For example:
+
+    atomic-rsync -av host:/remote/files/ /local/files/
+
+This would make the transfer to the directory /local/files~new~ and then
+swap out /local/files at the end of the transfer by renaming it to
+/local/files~old~ and putting the new directory into its place.  The
+/local/files~old~ directory will be preserved until the next update, at
+which point it will be deleted.
+
+Do NOT specify this command:
+
+    atomic-rsync -av host:/remote/files /local/
+
+... UNLESS you want the entire /local dir to be swapped out!
+
+See the "rsync" command for its list of options.  You may not use the
+--link-dest or --compare-dest options (since this script uses --link-dest
+to make the transfer efficient).  Also, the destination directory cannot
+be "/".
+EOT
+    exit $ret;
+}

support/mnt-excl

@@ -0,0 +1,44 @@
+#!/usr/bin/perl -w
+# This script takes a command-line arg of a source directory
+# that will be passed to rsync, and generates a set of excludes
+# that will exclude all mount points from the list.  This is
+# useful if you have "bind" mounts since the --one-file-system
+# option won't notice the transition to a different spot on
+# the same disk.  For example:
+#
+# mnt-excl /dir | rsync --exclude-from=- ... /dir /dest/
+# mnt-excl /dir/ | rsync --exclude-from=- ... /dir/ /dest/
+# ssh host mnt-excl /dir | rsync --exclude-from=- ... host:/dir /dest/
+#
+# Imagine that /dir/foo is a mount point: the first invocation of
+# mnt-excl would have output /dir/foo, while the second would have
+# output /foo (which are the properly anchored excludes).
+#
+# NOTE:  This script expects /proc/mounts to exist, but could be
+# easily adapted to read /etc/mtab or similar.
+#
+# ADDENDUM:  The addition of the --filter option (which has support for
+# absolute-anchored excludes) has made this script less useful than it
+# was.  Beginning with 2.6.4, you can achieve the effect of this script
+# though this command:
+#
+# awk '{print $2}' /proc/mounts | rsync -f 'merge,/- -' host:/dir /dest/
+
+use strict;
+use Cwd 'abs_path';
+
+my $file = '/proc/mounts';
+my $dir = shift || '/';
+$dir = abs_path($dir);
+$dir =~ s#([^/]*)$##;
+my $trailing = $1;
+$trailing = '' if $trailing eq '.' || !-d "$dir$trailing";
+$trailing .= '/' if $trailing ne '';
+
+open(IN, $file) or die "Unable to open $file: $!\n";
+while (<IN>) {
+    $_ = (split)[1];
+    next unless s#^\Q$dir$trailing\E##o && $_ ne '';
+    print "- /$trailing$_\n";
+}
+close IN;

support/rrsync

@@ -0,0 +1,74 @@
+#!/usr/bin/perl
+# Name: /usr/local/bin/rrsync (should also have a symlink in /usr/bin)
+# Purpose: Restricts rsync to subdirectory declared in .ssh/authorized_keys
+# Author: Joe Smith <js-cgi@inwap.com> 30-Sep-2004
+# Modified by Wayne Davison <wayned@samba.org> 12-Jan-2005
+
+use Socket;
+use constant LOGFILE => 'rrsync.log';
+my $Usage = <<EOM;
+Use 'command="$0 [-ro] SUBDIR"'
+	in front of lines in $ENV{HOME}/.ssh/authorized_keys
+EOM
+
+my $ro = (@ARGV and $ARGV[0] eq '-ro') ? shift : '';	# -ro = Read-Only
+my $subdir = shift;
+die "No subdirectory specified\n$Usage" unless defined $subdir;
+
+# The client uses "rsync -av -e ssh src/ server:dir/", and sshd on the server
+# executes this program when .ssh/authorized_keys has 'command="..."'.
+# For example:
+# command="rrsync logs/client" ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAzGhEeNlPr...
+# command="rrsync -ro results" ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAmkHG1WCjC...
+#
+# Format of the envrionment variables set by sshd:
+# SSH_ORIGINAL_COMMAND=rsync --server          -vlogDtpr --partial . dir # push
+# SSH_ORIGINAL_COMMAND=rsync --server --sender -vlogDtpr --partial . dir # pull
+# SSH_CONNECTION=client_addr client_port server_port
+
+my $command = $ENV{SSH_ORIGINAL_COMMAND};
+die "Not invoked via sshd\n$Usage"	unless defined $command;
+die "SSH_ORIGINAL_COMMAND='$command' is not rsync\n" unless $command =~ /^rsync\s/;
+die "$0 -ro: sending to read-only server not allowed\n"
+	if $ro and $command !~ /^rsync --server --sender /;
+die "$0 -ro: use of --remove-sent-files with read-only server not allowed\n"
+	if $ro and $command =~ /\s--remove-sent-files/;
+
+my ($cmd,$dir) = $command =~ /^(rsync\s+(?:-[-a-zA-Z]+\s+)+\.) ?("[^"]*"|[^\s"]*)$/;
+die "$0: invalid rsync-command syntax or options\n" if !defined $cmd;
+
+# Enforce default of $subdir instead of the normal $HOME default.
+my $orig = $dir;
+my @dirs;
+$dir =~ s/^"(.*?)"$/$1/;
+$dir =~ s/^\s+//;
+$dir =~ s/\s+$//;
+foreach (split(/(?<!\\)\s+/, $dir)) {
+  s/\\(\s)/$1/g;			# Unescape any escaped whitespace
+  if ($subdir eq '/') {			# Less checking for '/' access
+    $dir = '/' if $dir eq '';
+  } else {
+    s#^/##;				# Don't allow absolute paths
+    $_ = "$subdir/$_" unless m#^\Q$subdir\E(/|$)#;
+    1 while s#/\.\.(/|$)#/__/#g;	# Don't allow foo/../../etc
+  }
+  tr#-_/a-zA-Z0-9.,+@^%: #_#c;		# Don't allow '"&;|!=()[]{}<>*?#\$
+  s/(\s)/\\$1/g;			# Re-escape whitespace
+  push(@dirs, $_);
+}
+push(@dirs, $subdir) unless @dirs;
+$dir = join(' ', @dirs);
+
+if (-f LOGFILE and open LOG,'>>',LOGFILE) {
+  my ($mm,$hh) = (localtime)[1,2];
+  my $host = $ENV{SSH_CONNECTION} || 'unknown';
+  $host =~ s/ .*//;			# Keep only the client's IP addr
+  $host =~ s/^::ffff://;
+  $host = gethostbyaddr(inet_aton($host),AF_INET) || $host;
+  my $dir_result = $dir eq $orig ? " OK" : "> \"$dir\"";
+  printf LOG "%02d:%02d %-13s [%s] =%s\n", $hh, $mm, $host, $command, $dir_result;
+  close LOG;
+}
+
+exec "$cmd \"$dir\"" or die "exec($cmd \"$dir\") failed: $? $!";
+# Note: This assumes that the rsync protocol will not be maliciously hijacked.

support/rsyncstats

@@ -1,72 +1,67 @@
-#! /usr/bin/perl
-# ---------------------------------------------------------------------------
-#
-# USAGE: rsyncstats <options>
-#
-# OPTIONS:
-#       -f <filename>   Use <filename> for the log file
-#       -h		include report on hourly traffic
-#       -d		include report on domain traffic
-#       -t		report on total traffic by section
-#       -D <domain>     report only on traffic from <domain>
-#       -l <depth>      Depth of path detail for sections
-#       -s <section>    Section to report on, For example: -s /pub will report
-#				only on paths under /pub
+#!/usr/bin/perl
 #
 # This script parses the default logfile format produced by rsync when running
-# as a daemon with transfer logging enabled. It is derived from the xferstats
-# script that comes with wuftpd
+# as a daemon with transfer logging enabled.  It also parses a slightly tweaked
+# version of the default format where %o has been replaced with %i.
+#
+# This script is derived from the xferstats script that comes with wuftpd.  See
+# the usage message at the bottom for the options it takes.
 #
 # Andrew Tridgell, October 1998
-# rsync-bugs@samba.org
-#
-# ---------------------------------------------------------------------------
 
-# edit the next line to customize for your default log file
+use Getopt::Long;
+
+# You may wish to edit the next line to customize for your default log file.
 $usage_file = "/var/adm/rsyncd.log";
 
 # Edit the following lines for default report settings.
 # Entries defined here will be over-ridden by the command line.
 
-$opt_h = 1; 
-$opt_d = 0;
-$opt_t = 1;
-$opt_l = 2;
+$hourly_report = 0; 
+$domain_report = 0;
+$total_report = 0;
+$depth_limit = 9999;
+$only_section = '';
 
-require 'getopts.pl';
-&Getopts('f:rahdD:l:s:');
+&Getopt::Long::Configure('bundling');
+&usage if !&GetOptions(
+    'hourly-report|h' => \$hourly_report,
+    'domain-report|d' => \$domain_report,
+    'domain|D:s' => \$only_domain,
+    'total-report|t' => \$total_report,
+    'depth-limit|l:i' => \$depth_limit,
+    'real|r' => \$real,
+    'anon|a' => \$anon,
+    'section|s:s' => \$only_section,
+    'file|f:s' => \$usage_file,
+);
 
-if ($opt_r) { $real = 1;}
-if ($opt_a) { $anon = 1;}
-if ($real == 0 && $anon == 0) { $anon = 1; }
-if ($opt_f) {$usage_file = $opt_f;}
+$anon = 1 if !$real && !$anon;
 
-open (LOG,$usage_file) || die "Error opening usage log file: $usage_file\n";
+open(LOG, $usage_file) || die "Error opening usage log file: $usage_file\n";
 
-if ($opt_D) {print "Transfer Totals include the '$opt_D' domain only.\n";
-	     print "All other domains are filtered out for this report.\n\n";}
+if ($only_domain) {
+    print "Transfer Totals include the '$only_domain' domain only.\n";
+    print "All other domains are filtered out for this report.\n\n";
+}
 
-if ($opt_s) {print "Transfer Totals include the '$opt_s' section only.\n";
-	     print "All other sections are filtered out for this report.\n\n";}
+if ($only_section) {
+    print "Transfer Totals include the '$only_section' section only.\n";
+    print "All other sections are filtered out for this report.\n\n";
+}
 
 line: while (<LOG>) {
 
-   @line = split;
+   next unless ($day,$time,$op,$host,$module,$file,$bytes)
+      = m#^ (\d+/\d\d/\d\d)\s+(\d\d:\d\d:\d\d)\s+\[\d+\]\s+(send|recv|[<>]f\S+)\s+
+          (\S+)\s+\[\d+\.\d+\.\d+\.\d+\]\s+(\S+)\s+\(\S*\)\s+(.*)\s+(\d+) $ #x;
 
-   $day = $line[0];
-   $time = $line[1];
-   $pid = $line[2];
-   $op = $line[3];
-   $host = $line[4];
-   $ip = $line[5];
-   $module = $line[6];
-   $user = $line[7];
-   $file = $line[8];
-   $bytes = $line[9];
-
-   next if ($#line != 9);
-
-   next if ($op != "send" && $op != "recv");
+   # TODO actually divide the data by into send/recv categories
+   if ($op =~ /^>/) {
+      $op = 'send';
+   } elsif ($op =~ /^</) {
+      $op = 'recv';
+   }
 
    $daytime = $day;
    $hour = substr($time,0,2); 
@@ -78,11 +73,13 @@ line: while (<LOG>) {
    @path = split(/\//, $file);
 
    $pathkey = "";
-   for ($i=0; $i <= $#path && $i <= $opt_l;$i++) {
+   for ($i=0; $i <= $#path && $i <= $depth_limit; $i++) {
 	$pathkey = $pathkey . "/" . $path[$i];
    }
 
-   next if (substr($pathkey,0,length("$opt_s")) ne "$opt_s");
+   if ($only_section ne '') {
+       next unless (substr($pathkey,0,length($only_section)) eq $only_section);
+   }
 
    $host =~ tr/A-Z/a-z/;
 
@@ -92,12 +89,12 @@ line: while (<LOG>) {
    if ( int($address[0]) > 0 || $#address < 2 )
       { $domain = "unresolved"; }
 
-   if ($opt_D) {
-       next unless (substr($domain,0,length("$opt_D")) eq "$opt_D");
+   if ($only_domain ne '') {
+       next unless (substr($domain,0,length($only_domain)) eq $only_domain);
    }
 
 
-#   printf ("c=%d day=%s bytes=%d file=%s path=%s\n", 
+#   printf("c=%d day=%s bytes=%d file=%s path=%s\n", 
 #	   $#line, $daytime, $bytes, $file, $pathkey);
 
    $xferfiles++;                                # total files sent
@@ -117,20 +114,20 @@ line: while (<LOG>) {
 }
 close LOG;
 
-@syslist = keys(systemfiles);
-@dates = sort datecompare keys(xferbytes);
+#@syslist = keys %systemfiles;
+@dates = sort datecompare keys %xferbytes;
 
 if ($xferfiles == 0) {die "There was no data to process.\n";}
 
 
 print "TOTALS FOR SUMMARY PERIOD ", $dates[0], " TO ", $dates[$#dates], "\n\n";
-printf ("Files Transmitted During Summary Period  %12.0f\n", $xferfiles);
-printf ("Bytes Transmitted During Summary Period  %12.0f\n", $xferbytes); 
-printf ("Systems Using Archives                   %12.0f\n\n", $#syslist+1);
+printf("Files Transmitted During Summary Period  %12.0f\n", $xferfiles);
+printf("Bytes Transmitted During Summary Period  %12.0f\n", $xferbytes); 
+#printf("Systems Using Archives                   %12.0f\n\n", $#syslist+1);
 
-printf ("Average Files Transmitted Daily          %12.0f\n",
+printf("Average Files Transmitted Daily          %12.0f\n",
    $xferfiles / ($#dates + 1));
-printf ("Average Bytes Transmitted Daily          %12.0f\n",
+printf("Average Bytes Transmitted Daily          %12.0f\n",
    $xferbytes / ($#dates + 1));
 
 format top1 =
@@ -150,7 +147,7 @@ $date,           $nfiles,    $nbytes/(1024*1024), $pctfiles,  $pctbytes
 $^ = top1;
 $~ = line1;
 
-foreach $date ( sort datecompare keys(xferbytes) ) {
+foreach $date (sort datecompare keys %xferbytes) {
 
    $nfiles   = $xferfiles{$date};
    $nbytes   = $xferbytes{$date};
@@ -159,7 +156,7 @@ foreach $date ( sort datecompare keys(xferbytes) ) {
    write;
 }
 
-if ($opt_t) {
+if ($total_report) {
 format top2 =
 
 Total Transfers from each Archive Section (By bytes)
@@ -179,7 +176,7 @@ $- = 0;
 $^ = top2;
 $~ = line2;
 
-foreach $section ( sort bytecompare keys(groupfiles) ) {
+foreach $section (sort bytecompare keys %groupfiles) {
 
    $files = $groupfiles{$section};
    $bytes = $groupbytes{$section};
@@ -193,7 +190,7 @@ if ( $xferfiles < 1 ) { $xferfiles = 1; }
 if ( $xferbytes < 1 ) { $xferbytes = 1; }
 }
 
-if ($opt_d) {
+if ($domain_report) {
 format top3 =
 
 Total Transfer Amount By Domain
@@ -212,7 +209,7 @@ $- = 0;
 $^ = top3;
 $~ = line3;
 
-foreach $domain ( sort domnamcompare keys(domainfiles) ) {
+foreach $domain (sort domnamcompare keys %domainfiles) {
 
    if ( $domainsecs{$domain} < 1 ) { $domainsecs{$domain} = 1; }
 
@@ -226,7 +223,7 @@ foreach $domain ( sort domnamcompare keys(domainfiles) ) {
 
 }
 
-if ($opt_h) {
+if ($hourly_report) {
 
 format top8 =
 
@@ -248,7 +245,7 @@ $- = 0;
 $^ = top8;
 $~ = line8;
 
-foreach $hour ( sort keys(xfertbytes) ) {
+foreach $hour (sort keys %xfertbytes) {
 
    $nfiles   = $xfertfiles{$hour};
    $nbytes   = $xfertbytes{$hour};
@@ -284,3 +281,19 @@ sub faccompare {
 
 }
 
+sub usage
+{
+    die <<EOT;
+USAGE: rsyncstats [options]
+
+OPTIONS:
+  -f FILENAME   Use FILENAME for the log file.
+  -h            Include report on hourly traffic.
+  -d            Include report on domain traffic.
+  -t            Report on total traffic by section.
+  -D DOMAIN     Report only on traffic from DOMAIN.
+  -l DEPTH      Set DEPTH of path detail for sections.
+  -s SECTION    Set SECTION to report on. For example, "-s /pub"
+                will report only on paths under "/pub".
+EOT
+}

support/savetransfer.c

@@ -0,0 +1,178 @@
+/* This program can record the stream of data flowing to or from a program.
+ * This allows it to be used to check that rsync's data that is flowing
+ * through a remote shell is not being corrupted (for example).
+ *
+ * Usage: savetransfer [-i|-o] OUTPUT_FILE PROGRAM [ARGS...]
+ * -i  Save the input going to PROGRAM to the OUTPUT_FILE
+ * -o  Save the output coming from PROGRAM to the OUTPUT_FILE
+ *
+ * If you want to capture the flow of data for an rsync command, use one of
+ * the following commands (the first two are push commands, the last two are
+ * pull commands):
+ *
+ * rsync -av --rsh="savetransfer -i /tmp/from.sender ssh"
+ *   --rsync-path="savetransfer -i /tmp/to.receiver rsync" FILES HOST:DEST
+ *
+ * rsync -av --rsh="savetransfer -o /tmp/to.sender ssh"
+ *   --rsync-path="savetransfer -o /tmp/from.generator rsync" FILES HOST:DEST
+ *
+ * rsync -av --rsh="savetransfer -i /tmp/from.generator ssh"
+ *   --rsync-path="savetransfer -i /tmp/to.sender rsync" HOST:FILES DEST
+ *
+ * rsync -av --rsh="savetransfer -o /tmp/to.receiver ssh"
+ *   --rsync-path="savetransfer -o /tmp/from.sender rsync" HOST:FILES DEST
+ *
+ * Note that this program aborts after 30 seconds of inactivity, so you'll need
+ * to change it if that is not enough dead time for your transfer.  Also, some
+ * of the above commands will not notice that the transfer is done (if we're
+ * saving the input to a PROGRAM and the PROGRAM goes away:  we won't notice
+ * that it's gone unless more data comes in) -- when this happens it will delay
+ * at the end of the transfer until the timeout period expires.
+ */
+
+#include "../rsync.h"
+
+#define TIMEOUT_SECONDS 30
+
+void run_program(char **command);
+
+char buf[4096];
+int save_data_from_program = 0;
+
+int
+main(int argc, char *argv[])
+{
+    int fd_file, len;
+    struct timeval tv;
+    fd_set fds;
+
+    argv++;
+    if (--argc && argv[0][0] == '-') {
+	if (argv[0][1] == 'o')
+	    save_data_from_program = 1;
+	else if (argv[0][1] == 'i')
+	    save_data_from_program = 0;
+	else {
+	    fprintf(stderr, "Unknown option: %s\n", argv[0]);
+	    exit(1);
+	}
+	argv++;
+	argc--;
+    }
+    if (argc < 2) {
+	fprintf(stderr, "Usage: savetransfer [-i|-o] OUTPUT_FILE PROGRAM [ARGS...]\n");
+	fprintf(stderr, "-i  Save the input going to PROGRAM to the OUTPUT_FILE\n");
+	fprintf(stderr, "-o  Save the output coming from PROGRAM to the OUTPUT_FILE\n");
+	exit(1);
+    }
+    if ((fd_file = open(*argv, O_WRONLY|O_TRUNC|O_CREAT|O_BINARY, 0644)) < 0) {
+	fprintf(stderr, "Unable to write to `%s': %s\n", *argv, strerror(errno));
+	exit(1);
+    }
+    set_blocking(fd_file);
+
+    signal(SIGPIPE, SIG_IGN);
+
+    run_program(argv + 1);
+
+#if defined HAVE_SETMODE && O_BINARY
+    setmode(STDIN_FILENO, O_BINARY);
+    setmode(STDOUT_FILENO, O_BINARY);
+#endif
+    set_nonblocking(STDIN_FILENO);
+    set_blocking(STDOUT_FILENO);
+
+    while (1) {
+	FD_ZERO(&fds);
+	FD_SET(STDIN_FILENO, &fds);
+	tv.tv_sec = TIMEOUT_SECONDS;
+	tv.tv_usec = 0;
+	if (!select(STDIN_FILENO+1, &fds, NULL, NULL, &tv))
+	    break;
+	if (!FD_ISSET(STDIN_FILENO, &fds))
+	    break;
+	if ((len = read(STDIN_FILENO, buf, sizeof buf)) <= 0)
+	    break;
+	if (write(STDOUT_FILENO, buf, len) != len) {
+	    fprintf(stderr, "Failed to write data to stdout: %s\n", strerror(errno));
+	    exit(1);
+	}
+	if (write(fd_file, buf, len) != len) {
+	    fprintf(stderr, "Failed to write data to fd_file: %s\n", strerror(errno));
+	    exit(1);
+	}
+    }
+    return 0;
+}
+
+void
+run_program(char **command)
+{
+    int pipe_fds[2], ret;
+    pid_t pid;
+
+    if (pipe(pipe_fds) < 0) {
+	fprintf(stderr, "pipe failed: %s\n", strerror(errno));
+	exit(1);
+    }
+
+    if ((pid = fork()) < 0) {
+	fprintf(stderr, "fork failed: %s\n", strerror(errno));
+	exit(1);
+    }
+
+    if (pid == 0) {
+	if (save_data_from_program)
+	    ret = dup2(pipe_fds[1], STDOUT_FILENO);
+	else
+	    ret = dup2(pipe_fds[0], STDIN_FILENO);
+	if (ret < 0) {
+	    fprintf(stderr, "Failed to dup (in child): %s\n", strerror(errno));
+	    exit(1);
+	}
+	close(pipe_fds[0]);
+	close(pipe_fds[1]);
+	set_blocking(STDIN_FILENO);
+	set_blocking(STDOUT_FILENO);
+	execvp(command[0], command);
+	fprintf(stderr, "Failed to exec %s: %s\n", command[0], strerror(errno));
+	exit(1);
+    }
+
+    if (save_data_from_program)
+	ret = dup2(pipe_fds[0], STDIN_FILENO);
+    else
+	ret = dup2(pipe_fds[1], STDOUT_FILENO);
+    if (ret < 0) {
+	fprintf(stderr, "Failed to dup (in parent): %s\n", strerror(errno));
+	exit(1);
+    }
+    close(pipe_fds[0]);
+    close(pipe_fds[1]);
+}
+
+void
+set_nonblocking(int fd)
+{
+    int val;
+
+    if ((val = fcntl(fd, F_GETFL, 0)) == -1)
+	return;
+    if (!(val & NONBLOCK_FLAG)) {
+	val |= NONBLOCK_FLAG;
+	fcntl(fd, F_SETFL, val);
+    }
+}
+
+void
+set_blocking(int fd)
+{
+    int val;
+
+    if ((val = fcntl(fd, F_GETFL, 0)) < 0)
+	return;
+    if (val & NONBLOCK_FLAG) {
+	val &= ~NONBLOCK_FLAG;
+	fcntl(fd, F_SETFL, val);
+    }
+}

syscall.c

@@ -26,6 +26,10 @@
 
 #include "rsync.h"
 
+#if !defined MKNOD_CREATES_SOCKETS && defined HAVE_SYS_UN_H
+#include <sys/un.h>
+#endif
+
 extern int dry_run;
 extern int read_only;
 extern int list_only;
@@ -55,7 +59,7 @@ int do_symlink(char *fname1, char *fname2)
 	return symlink(fname1, fname2);
 }
 
-#if HAVE_LINK
+#ifdef HAVE_LINK
 int do_link(char *fname1, char *fname2)
 {
 	if (dry_run) return 0;
@@ -68,17 +72,47 @@ int do_lchown(const char *path, uid_t owner, gid_t group)
 {
 	if (dry_run) return 0;
 	RETURN_ERROR_IF_RO_OR_LO;
+#ifndef HAVE_LCHOWN
+#define lchown chown
+#endif
 	return lchown(path, owner, group);
 }
 
-#if HAVE_MKNOD
 int do_mknod(char *pathname, mode_t mode, dev_t dev)
 {
 	if (dry_run) return 0;
 	RETURN_ERROR_IF_RO_OR_LO;
-	return mknod(pathname, mode, dev);
-}
+#if !defined MKNOD_CREATES_FIFOS && defined HAVE_MKFIFO
+	if (S_ISFIFO(mode))
+		return mkfifo(pathname, mode);
 #endif
+#if !defined MKNOD_CREATES_SOCKETS && defined HAVE_SYS_UN_H
+	if (S_ISSOCK(mode)) {
+		int sock;
+		struct sockaddr_un saddr;
+		unsigned int len;
+
+		saddr.sun_family = AF_UNIX;
+		len = strlcpy(saddr.sun_path, pathname, sizeof saddr.sun_path);
+#ifdef HAVE_SOCKADDR_UN_LEN
+		saddr.sun_len = len >= sizeof saddr.sun_path
+			      ? sizeof saddr.sun_path : len + 1;
+#endif
+
+		if ((sock = socket(PF_UNIX, SOCK_STREAM, 0)) < 0
+		    || (unlink(pathname) < 0 && errno != ENOENT)
+		    || (bind(sock, (struct sockaddr*)&saddr, sizeof saddr)) < 0)
+			return -1;
+		close(sock);
+		return do_chmod(pathname, mode);
+	}
+#endif
+#ifdef HAVE_MKNOD
+	return mknod(pathname, mode, dev);
+#else
+	return -1;
+#endif
+}
 
 int do_rmdir(char *pathname)
 {
@@ -97,7 +131,7 @@ int do_open(char *pathname, int flags, mode_t mode)
 	return open(pathname, flags | O_BINARY, mode);
 }
 
-#if HAVE_CHMOD
+#ifdef HAVE_CHMOD
 int do_chmod(const char *path, mode_t mode)
 {
 	int code;
@@ -152,7 +186,7 @@ int do_mkstemp(char *template, mode_t perms)
 	RETURN_ERROR_IF(dry_run, 0);
 	RETURN_ERROR_IF(read_only, EROFS);
 
-#if defined(HAVE_SECURE_MKSTEMP) && defined(HAVE_FCHMOD)
+#if defined HAVE_SECURE_MKSTEMP && defined HAVE_FCHMOD && (!defined HAVE_OPEN64 || defined HAVE_MKSTEMP64)
 	{
 		int fd = mkstemp(template);
 		if (fd == -1)
@@ -164,6 +198,9 @@ int do_mkstemp(char *template, mode_t perms)
 			errno = errno_save;
 			return -1;
 		}
+#if defined HAVE_SETMODE && O_BINARY
+		setmode(fd, O_BINARY);
+#endif
 		return fd;
 	}
 #else
@@ -175,27 +212,29 @@ int do_mkstemp(char *template, mode_t perms)
 
 int do_stat(const char *fname, STRUCT_STAT *st)
 {
-#if HAVE_OFF64_T
+#ifdef USE_STAT64_FUNCS
 	return stat64(fname, st);
 #else
 	return stat(fname, st);
 #endif
 }
 
-#if SUPPORT_LINKS
 int do_lstat(const char *fname, STRUCT_STAT *st)
 {
-#if HAVE_OFF64_T
+#ifdef SUPPORT_LINKS
+# ifdef USE_STAT64_FUNCS
 	return lstat64(fname, st);
-#else
+# else
 	return lstat(fname, st);
+# endif
+#else
+	return do_stat(fname, st);
 #endif
 }
-#endif
 
 int do_fstat(int fd, STRUCT_STAT *st)
 {
-#if HAVE_OFF64_T
+#ifdef USE_STAT64_FUNCS
 	return fstat64(fd, st);
 #else
 	return fstat(fd, st);
@@ -204,7 +243,7 @@ int do_fstat(int fd, STRUCT_STAT *st)
 
 OFF_T do_lseek(int fd, OFF_T offset, int whence)
 {
-#if HAVE_OFF64_T
+#if SIZEOF_OFF64_T
 	off64_t lseek64();
 	return lseek64(fd, offset, whence);
 #else
@@ -212,20 +251,9 @@ OFF_T do_lseek(int fd, OFF_T offset, int whence)
 #endif
 }
 
-#ifdef USE_MMAP
-void *do_mmap(void *start, int len, int prot, int flags, int fd, OFF_T offset)
-{
-#if HAVE_OFF64_T
-	return mmap64(start, len, prot, flags, fd, offset);
-#else
-	return mmap(start, len, prot, flags, fd, offset);
-#endif
-}
-#endif
-
 char *d_name(struct dirent *di)
 {
-#if HAVE_BROKEN_READDIR
+#ifdef HAVE_BROKEN_READDIR
 	return (di->d_name - 2);
 #else
 	return di->d_name;

t_stub.c

@@ -28,7 +28,8 @@
 
 int modify_window = 0;
 int module_id = -1;
-struct exclude_list_struct server_exclude_list;
+char *partial_dir;
+struct filter_list_struct server_filter_list;
 
  void rprintf(UNUSED(enum logcode code), const char *format, ...)
 {
@@ -38,6 +39,16 @@ struct exclude_list_struct server_exclude_list;
 	va_end(ap);
 }
 
+ void rsyserr(UNUSED(enum logcode code), int errcode, const char *format, ...)
+{
+	va_list ap;
+	fputs(RSYNC_NAME ": ", stderr);
+	va_start(ap, format);
+	vfprintf(stderr, format, ap);
+	va_end(ap);
+	fprintf(stderr, ": %s (%d)\n", strerror(errcode), errcode);
+}
+
  void _exit_cleanup(int code, const char *file, int line)
 {
 	fprintf(stderr, "exit(%d): %s(%d)\n",
@@ -45,7 +56,7 @@ struct exclude_list_struct server_exclude_list;
 	exit(code);
 }
 
- int check_exclude(UNUSED(struct exclude_list_struct *listp), UNUSED(char *name),
+ int check_filter(UNUSED(struct filter_list_struct *listp), UNUSED(char *name),
 		   UNUSED(int name_is_dir))
 {
 	/* This function doesn't really get called in this test context, so

test.sh

@@ -1,173 +0,0 @@
-#!/bin/sh
-
-# Copyright (C) 1998,1999 Philip Hands <phil@hands.com>
-#
-# This program is distributable under the terms of the GNU GPL (see COPYING)
-#
-# This is a simple test script that tests a few rsync
-# features to make sure I haven't broken them before a release.
-#
-#
-
-# check if we are running under debian-test, and change behaviour to suit
-if test -n "${DEBIANTEST_LIB}" ; then
-  # make sure rsync is installed
-  test -e /usr/bin/rsync || exit 0
-  
-  . ${DEBIANTEST_LIB}/functions.sh
-  Debian=1
-else
-  cat <<EOF
-
-This set of tests is not completely portable. It is intended for developers
-not for end users. You may experience failures on some platforms that
-do not indicate a problem with rsync.
-
-EOF
-
-RSYNC=`pwd`/rsync
-
-  runtest() {
-    echo -n "Test $1: "
-    eval "$2"
-  }
-  printmsg() {
-    echo ""
-    echo "**** ${1}^G ****"
-    echo ""  
-  }
-fi
-
-TMP=/tmp/rsync-test.$$
-FROM=${TMP}/from
-TO=${TMP}/to
-F1=text1
-LOG=${TMP}/log
-
-mkdir $TMP
-mkdir $FROM
-mkdir $TO
-
-# set up test data
-touch ${FROM}/empty
-mkdir ${FROM}/emptydir
-ps ax > ${FROM}/pslist
-echo -n "This file has no trailing lf" > ${FROM}/nolf
-ln -s nolf ${FROM}/nolf-symlink
-
-# Gather some random text.  We need files that will exist and be
-# publicly readable on all platforms: hopefully this will work.
-cat /etc/*tab /etc/services /etc/*.conf /etc/*rc > ${FROM}/${F1}
-
-mkdir ${FROM}/dir
-cp ${FROM}/${F1} ${FROM}/dir/
-mkdir ${FROM}/dir/subdir
-mkdir ${FROM}/dir/subdir/subsubdir
-ls -ltr /etc > ${FROM}/dir/subdir/subsubdir/etc-ltr-list
-mkdir ${FROM}/dir/subdir/subsubdir2
-ls -lt /bin > ${FROM}/dir/subdir/subsubdir2/bin-lt-list
-
-checkit() {
-  testnum=`expr 0${testnum} + 1`
-  log=${LOG}.${testnum}
-  failed=
-  echo "Running: \"$1\""  >${log}
-  echo "">>${log}
-  eval "$1"  >>${log} 2>&1
-  status=$?
-  if [ $status != 0 ]; then
-    failed="YES";
-  fi
-  echo "-------------">>${log}
-  echo "check how the files compare with diff:">>${log}
-  echo "">>${log}
-  diff -ur $2 $3 >>${log} 2>&1 || failed=YES
-  echo "-------------">>${log}
-  echo "check how the directory listings compare with diff:">>${log}
-  echo "">>${log}
-  ( cd $2 ; ls -laR ) > ${TMP}/ls-from 2>>${log}
-  ( cd $3 ; ls -laR ) > ${TMP}/ls-to  2>>${log}
-  diff -u ${TMP}/ls-from ${TMP}/ls-to >>${log} 2>&1 || failed=YES
-  if [ -z "${failed}" ] ; then
-    test -z "${Debian}" && echo "	done."
-    rm $log
-    return 0
-  else
-    if test -n "${Debian}" ; then
-      cat ${log}
-      rm ${log}
-    else
-      echo "	FAILED (test # ${testnum} status=$status)."
-    fi
-    return 1
-  fi
-}
-
-
-checkforlogs() {
-  # skip it if we're under debian-test
-  if test -n "${Debian}" ; then return 0 ; fi
-
-  if [ -f $1 ] ; then
-    cat <<EOF
-
-Failures have occured.
-
-You can find the output of the tests in these files:
-  $@
-
-Please hit <RETURN>
-EOF
-  read input
-  else
-
-    rm -rf ${TMP}
-    echo ""
-    echo "Tests Completed Successfully :-)"
-  fi
-}
-
-# Main script starts here
-
-runtest "basic operation" 'checkit "$RSYNC -av ${FROM}/ ${TO}" ${FROM}/ ${TO}'
-
-ln ${FROM}/pslist ${FROM}/dir
-runtest "hard links" 'checkit "$RSYNC -avH ${FROM}/ ${TO}" ${FROM}/ ${TO}'
-
-rm ${TO}/${F1}
-runtest "one file" 'checkit "$RSYNC -avH ${FROM}/ ${TO}" ${FROM}/ ${TO}'
-
-echo "extra line" >> ${TO}/${F1}
-runtest "extra data" 'checkit "$RSYNC -avH ${FROM}/ ${TO}" ${FROM}/ ${TO}'
-
-cp ${FROM}/${F1} ${TO}/ThisShouldGo
-runtest " --delete" 'checkit "$RSYNC --delete -avH ${FROM}/ ${TO}" ${FROM}/ ${TO}'
-
-LONGDIR=${FROM}/This-is-a-directory-with-a-stupidly-long-name-created-in-an-attempt-to-provoke-an-error-found-in-2.0.11-that-should-hopefully-never-appear-again-if-this-test-does-its-job/This-is-a-directory-with-a-stupidly-long-name-created-in-an-attempt-to-provoke-an-error-found-in-2.0.11-that-should-hopefully-never-appear-again-if-this-test-does-its-job/This-is-a-directory-with-a-stupidly-long-name-created-in-an-attempt-to-provoke-an-error-found-in-2.0.11-that-should-hopefully-never-appear-again-if-this-test-does-its-job
-mkdir -p ${LONGDIR}
-date > ${LONGDIR}/1
-ls -la / > ${LONGDIR}/2
-runtest "long paths" 'checkit "$RSYNC --delete -avH ${FROM}/ ${TO}" ${FROM}/ ${TO}'
-
-if type ssh >/dev/null 2>&1; then
-  if [ "`ssh -o'BatchMode yes' localhost echo yes 2>/dev/null`" = "yes" ]; then
-  rm -rf ${TO}
-    runtest "ssh: basic test" 'checkit "$RSYNC -avH -e ssh --rsync-path=$RSYNC ${FROM}/ localhost:${TO}" ${FROM}/ ${TO}'
-
-    mv ${TO}/${F1} ${TO}/ThisShouldGo
-    runtest "ssh: renamed file" 'checkit "$RSYNC --delete -avH -e ssh --rsync-path=$RSYNC ${FROM}/ localhost:${TO}" ${FROM}/ ${TO}'
-  else
-  printmsg "Skipping SSH tests because ssh conection to localhost not authorised"
-  fi
-else
-  printmsg "Skipping SSH tests because ssh is not in the path"
-fi
-
-rm -rf ${TO}
-mkdir -p ${FROM}2/dir/subdir
-cp -a ${FROM}/dir/subdir/subsubdir ${FROM}2/dir/subdir
-cp ${FROM}/dir/* ${FROM}2/dir 2>/dev/null
-runtest "excludes" 'checkit "$RSYNC -vv -Hlrt --delete --include /dir/ --include /dir/\* --include /dir/\*/subsubdir  --include /dir/\*/subsubdir/\*\* --exclude \*\* ${FROM}/dir ${TO}" ${FROM}2/ ${TO}'
-rm -r ${FROM}2
-
-checkforlogs ${LOG}.?

testsuite/README.testsuite

@@ -17,8 +17,8 @@ with the GNU Standards, installcheck does not look for rsync on the
 path.
 
 If the tests pass, you should see a report to that effect.  Some tests
-require being root or some other precondition, and so will normally be
-checked -- look at the test scripts for more information.
+require being root or some other precondition, and so will normally not
+be checked -- look at the test scripts for more information.
 
 If the tests fail, you will see rather more output.  The scratch
 directory will remain in the build directory.  It would be useful if

testsuite/backup.test

@@ -0,0 +1,61 @@
+#! /bin/sh
+
+# Copyright (C) 2004 by Wayne Davison <wayned@samba.org>
+
+# This program is distributable under the terms of the GNU GPL (see
+# COPYING).
+
+# Test that the --backup option works right.
+
+. "$suitedir/rsync.fns"
+
+bakdir="$tmpdir/bak"
+
+mkdir "$fromdir" "$bakdir"
+name1="$fromdir/name1"
+name2="$fromdir/name2"
+
+outfile="$scratchdir/rsync.out"
+
+cat $srcdir/[gr]*.[ch] > "$name1"
+cat $srcdir/[et]*.[ch] > "$name2"
+
+checkit "$RSYNC -avv \"$fromdir/\" \"$todir/\"" "$fromdir" "$todir"
+
+checkit "$RSYNC -avv \"$fromdir/\" \"$chkdir/\"" "$fromdir" "$chkdir"
+cat $srcdir/[fgpr]*.[ch] > "$name1"
+cat $srcdir/[etw]*.[ch] > "$name2"
+
+$RSYNC -avv --no-whole-file --backup "$fromdir/" "$todir/" \
+    | tee "$outfile"
+for fn in name1 name2; do
+    grep "backed up $fn to $fn~" "$outfile" >/dev/null || test_fail "no backup message output for $fn"
+    diff $diffopt "$fromdir/$fn" "$todir" || test_fail "copy of $fn failed"
+    diff $diffopt "$chkdir/$fn" "$todir/$fn~" || test_fail "backup of $fn to $fn~ failed"
+    mv "$todir/$fn~" "$todir/$fn"
+done
+
+checkit "$RSYNC -avv --no-whole-file --backup --backup-dir=\"$bakdir\" \"$fromdir/\" \"$todir/\"" "$fromdir" "$todir" \
+    | tee "$outfile"
+
+for fn in name1 name2; do
+    grep "backed up $fn to .*/$fn$" "$outfile" >/dev/null || test_fail "no backup message output for $fn"
+done
+diff -r $diffopt "$chkdir" "$bakdir" || test_fail "backup dir contents are bogus"
+
+checkit "$RSYNC -avv \"$fromdir/\" \"$chkdir/\"" "$fromdir" "$chkdir"
+cat $srcdir/[efgr]*.[ch] > "$name1"
+cat $srcdir/[ew]*.[ch] > "$name2"
+
+checkit "$RSYNC -avv --inplace --no-whole-file --backup --backup-dir=\"$bakdir\" \"$fromdir/\" \"$todir/\"" "$fromdir" "$todir" \
+    | tee "$outfile"
+
+for fn in name1 name2; do
+    grep "backed up $fn to .*/$fn$" "$outfile" >/dev/null || test_fail "no backup message output for $fn"
+done
+diff -r $diffopt "$chkdir" "$bakdir" || test_fail "backup dir contents are bogus"
+
+checkit "$RSYNC -avv --inplace --no-whole-file \"$fromdir/\" \"$bakdir/\"" "$fromdir" "$bakdir"
+
+# The script would have aborted on error, so getting here means we've won.
+exit 0

testsuite/batch-mode.test

@@ -0,0 +1,45 @@
+#! /bin/sh
+
+# Copyright (C) 2004 by Chris Shoemaker <c.shoemaker@cox.net>
+
+# This program is distributable under the terms of the GNU GPL (see
+# COPYING).
+
+# Test rsync's --write-batch and --read-batch options
+
+. "$suitedir/rsync.fns"
+
+set -x
+
+hands_setup
+
+cd "$tmpdir"
+
+# Build chkdir for the daemon tests using a normal rsync and an --exclude.
+$RSYNC -av --exclude=foobar.baz "$fromdir/" "$chkdir/"
+
+runtest "local --write-batch" 'checkit "$RSYNC -av --write-batch=BATCH \"$fromdir/\" \"$todir\"" "$fromdir" "$todir"'
+
+rm -rf "$todir"
+runtest "--read-batch" 'checkit "$RSYNC -av --read-batch=BATCH \"$todir\"" "$fromdir" "$todir"'
+
+build_rsyncd_conf
+
+RSYNC_CONNECT_PROG="$RSYNC --config=$conf --daemon"
+export RSYNC_CONNECT_PROG
+
+rm -rf "$todir"
+runtest "daemon sender --write-batch" 'checkit "$RSYNC -av --write-batch=BATCH rsync://localhost/test-from/ \"$todir\"" "$chkdir" "$todir"'
+
+rm -rf "$todir"
+runtest "--read-batch from daemon" 'checkit "$RSYNC -av --read-batch=BATCH \"$todir\"" "$chkdir" "$todir"'
+
+rm -rf "$todir"
+runtest "BATCH.sh use of --read-batch" 'checkit "./BATCH.sh" "$chkdir" "$todir"'
+
+rm -rf "$todir"
+mkdir "$todir" || test_fail "failed to restore empty destination directory"
+runtest "daemon recv --write-batch" 'checkit "$RSYNC -av --write-batch=BATCH \"$fromdir/\" rsync://localhost/test-to" "$chkdir" "$todir"'
+
+# The script would have aborted on error, so getting here means we pass.
+exit 0

testsuite/chgrp.test

@@ -9,15 +9,12 @@
 # the test is a member of them.  Hopefully they're in at least one
 # test.
 
-. $srcdir/testsuite/rsync.fns
+. "$suitedir/rsync.fns"
 
 set -x
 
 # Build some hardlinks
 
-fromdir="$scratchdir/from"
-todir="$scratchdir/to"
-
 mygrps="`rsync_getgroups`" || fail "Can't get groups"
 mkdir "$fromdir"
 
@@ -29,7 +26,7 @@ do
 done
 sleep 2
 
-checkit "$RSYNC -rtgvvv \"$fromdir/\" \"$todir/\"" "$fromdir" "$todir"
+checkit "$RSYNC -rtgpvvv \"$fromdir/\" \"$todir/\"" "$fromdir" "$todir"
 
 # The script would have aborted on error, so getting here means we've won.
 exit 0

testsuite/chmod-temp-dir.test

@@ -0,0 +1,41 @@
+#! /bin/sh
+
+# Copyright (C) 2004 by Wayne Davison <wayned@samba.org>
+
+# This program is distributable under the terms of the GNU GPL see
+# COPYING).
+
+# Test that various read-only and set[ug]id permissions work properly,
+# even when using a --temp-dir option (which we try to point at a
+# different filesystem than the destination dir).
+
+. "$suitedir/rsync.fns"
+
+set -x
+
+hands_setup
+
+tmpdir2=/tmp
+sdev=`$TOOLDIR/getfsdev $scratchdir`
+tdev=`$TOOLDIR/getfsdev $tmpdir2`
+if [ x$sdev = x$tdev ]; then
+    tmpdir2=/var/tmp
+    tdev=`$TOOLDIR/getfsdev $tmpdir2`
+    [ x$sdev = x$tdev ] && test_skipped "Can't find a tmp dir on a different file system"
+fi
+
+chmod 440 "$fromdir/text"
+chmod 500 "$fromdir/dir/text"
+e="$fromdir/dir/subdir/foobar.baz"
+chmod 6450 "$e" || chmod 2450 "$e" || chmod 1450 "$e" || chmod 450 "$e"
+e="$fromdir/dir/subdir/subsubdir/etc-ltr-list"
+chmod 2670 "$e" || chmod 1670 "$e" || chmod 670 "$e"
+
+# First a normal copy.
+runtest "normal copy" 'checkit "$RSYNC -avv --temp-dir=\"$tmpdir2\" \"$fromdir/\" \"$todir\"" "$fromdir" "$todir"'
+
+# Then we update all the files.
+runtest "update copy" 'checkit "$RSYNC -avvI --no-whole-file --temp-dir=\"$tmpdir2\" \"$fromdir/\" \"$todir\"" "$fromdir" "$todir"'
+
+# The script would have aborted on error, so getting here means we've won.
+exit 0

testsuite/chmod.test

@@ -0,0 +1,32 @@
+#! /bin/sh
+
+# Copyright (C) 2004 by Wayne Davison <wayned@samba.org>
+
+# This program is distributable under the terms of the GNU GPL see
+# COPYING).
+
+# Test that various read-only and set[ug]id permissions work properly,
+# even when using a --temp-dir option (which we try to point at a
+# different filesystem than the destination dir).
+
+. "$suitedir/rsync.fns"
+
+set -x
+
+hands_setup
+
+chmod 440 "$fromdir/text"
+chmod 500 "$fromdir/dir/text"
+e="$fromdir/dir/subdir/foobar.baz"
+chmod 6450 "$e" || chmod 2450 "$e" || chmod 1450 "$e" || chmod 450 "$e"
+e="$fromdir/dir/subdir/subsubdir/etc-ltr-list"
+chmod 2670 "$e" || chmod 1670 "$e" || chmod 670 "$e"
+
+# First a normal copy.
+runtest "normal copy" 'checkit "$RSYNC -avv \"$fromdir/\" \"$todir\"" "$fromdir" "$todir"'
+
+# Then we update all the files.
+runtest "update copy" 'checkit "$RSYNC -avvI --no-whole-file \"$fromdir/\" \"$todir\"" "$fromdir" "$todir"'
+
+# The script would have aborted on error, so getting here means we've won.
+exit 0

testsuite/chown.test

@@ -11,14 +11,21 @@
 # We don't know what users will be present on this system, so we just
 # use random numeric uids and gids.
 
-. $srcdir/testsuite/rsync.fns
+. "$suitedir/rsync.fns"
 
 set -x
 
-# Build some hardlinks
+case `id -u` in
+'') ;; # If "id" failed, try to continue...
+0)  ;;
+*)  if [ -f /usr/bin/fakeroot ]; then
+	echo "Let's try re-running the script under fakeroot..."
+	exec /usr/bin/fakeroot /bin/sh "$0"
+    fi
+    ;;
+esac
 
-fromdir="$scratchdir/from"
-todir="$scratchdir/to"
+# Build some hardlinks
 
 mkdir "$fromdir"
 name1="$fromdir/name1"

testsuite/compare-dest.test

@@ -0,0 +1,39 @@
+#! /bin/sh
+
+# Copyright (C) 2004 by Wayne Davison <wayned@samba.org>
+
+# This program is distributable under the terms of the GNU GPL see
+# COPYING).
+
+# Test rsync handling of the --compare-dest option.
+
+. "$suitedir/rsync.fns"
+
+alt1dir="$tmpdir/alt1"
+alt2dir="$tmpdir/alt2"
+
+# Build some files/dirs/links to copy
+
+set -x
+
+hands_setup
+
+# Setup the alt and chk dirs
+$RSYNC -av --include=text --include='*/' --exclude='*' "$fromdir/" "$alt1dir/"
+$RSYNC -av --include=etc-ltr-list --include='*/' --exclude='*' "$fromdir/" "$alt2dir/"
+
+sleep 1
+touch "$fromdir/dir/text"
+
+$RSYNC -av --exclude=/text --exclude=etc-ltr-list "$fromdir/" "$chkdir/"
+
+# Let's do it!
+checkit "$RSYNC -avv --no-whole-file \
+    --compare-dest=\"$alt1dir\" --compare-dest=\"$alt2dir\" \
+    \"$fromdir/\" \"$todir/\"" "$chkdir" "$todir"
+checkit "$RSYNC -avv --no-whole-file \
+    --copy-dest=\"$alt1dir\" --copy-dest=\"$alt2dir\" \
+    \"$fromdir/\" \"$todir/\"" "$fromdir" "$todir"
+
+# The script would have aborted on error, so getting here means we've won.
+exit 0

testsuite/daemon-gzip-download.test

@@ -26,8 +26,14 @@ build_rsyncd_conf
 RSYNC_CONNECT_PROG="$RSYNC --config=$conf --daemon"
 export RSYNC_CONNECT_PROG
 
+set -x
+
 hands_setup
-checkit "$RSYNC -avvvvz localhost::test-from/ \"$TO/\"" "$FROM" "$TO"
+
+# Build chkdir with a normal rsync and an --exclude.
+$RSYNC -av --exclude=foobar.baz "$fromdir/" "$chkdir/"
+
+checkit "$RSYNC -avvvvz localhost::test-from/ \"$todir/\"" "$chkdir" "$todir"
 
 # The script would have aborted on error, so getting here means we've won.
 exit 0

testsuite/daemon-gzip-upload.test

@@ -20,8 +20,14 @@ build_rsyncd_conf
 RSYNC_CONNECT_PROG="$RSYNC --config=$conf --daemon"
 export RSYNC_CONNECT_PROG
 
+set -x
+
 hands_setup
-checkit "$RSYNC -avvvvz \"$FROM/\" localhost::test-to/" "$FROM" "$TO"
+
+# Build chkdir with a normal rsync and an --exclude.
+$RSYNC -av --exclude=foobar.baz "$fromdir/" "$chkdir/"
+
+checkit "$RSYNC -avvvvz \"$fromdir/\" localhost::test-to/" "$chkdir" "$todir"
 
 # The script would have aborted on error, so getting here means we've won.
 exit 0

testsuite/delete.test

@@ -0,0 +1,29 @@
+#! /bin/sh
+
+# Copyright (C) 2005 by Wayne Davison <wayned@samba.org>
+
+# This program is distributable under the terms of the GNU GPL see
+# COPYING).
+
+# Test rsync handling of various delete directives.  
+
+. "$suitedir/rsync.fns"
+
+set -x
+
+hands_setup
+
+makepath "$chkdir"
+
+# Create two chk dirs, one with a copy of the source files, and one with
+# what we expect to be left behind by the copy using --remove-sent-files.
+$RSYNC -av "$fromdir/" "$chkdir/copy/"
+$RSYNC -av -f 'exclude,! */' "$fromdir/" "$chkdir/empty/"
+
+checkit "$RSYNC -avv --remove-sent-files \
+    \"$fromdir/\" \"$todir/\"" "$chkdir/copy" "$todir"
+
+diff -r "$chkdir/empty" "$fromdir"
+
+# The script would have aborted on error, so getting here means we've won.
+exit 0

testsuite/devices.test

@@ -7,19 +7,19 @@
 
 # Test rsync handling of devices.  This can only run if you're root.
 
-. $srcdir/testsuite/rsync.fns
-
-set -x
+. "$suitedir/rsync.fns"
 
 # Build some hardlinks
 
-fromdir="$scratchdir/from"
-todir="$scratchdir/to"
-
 case `id -u` in
 '') ;; # If "id" failed, try to continue...
-0) ;;
-*) test_skipped "Rsync won't copy devices unless we're root" ;;
+0)  ;;
+*)  if [ -f /usr/bin/fakeroot ]; then
+	echo "Let's try re-running the script under fakeroot..."
+	exec /usr/bin/fakeroot /bin/sh "$0"
+    fi
+    test_skipped "Rsync won't copy devices unless we're root"
+    ;;
 esac
 
 # TODO: Need to test whether hardlinks are possible on this OS/filesystem
@@ -31,8 +31,9 @@ mknod "$fromdir/char3" c 42 69  || test_skipped "Can't create char device node u
 mknod "$fromdir/block" b 42 69 || test_skipped "Can't create block device node unless root"
 mknod "$fromdir/block2" b 42 73 || test_skipped "Can't create block device node unless root"
 mknod "$fromdir/block3" b 105 73 || test_skipped "Can't create block device node unless root"
+mkfifo "$fromdir/fifo" || test_skipped "Can't run mkfifo"
 
-checkit "$RSYNC -aHvv \"$fromdir/\" \"$todir/\"" "$fromdir" "$todir"
+checkit "$RSYNC -aHvv \"$fromdir/\" \"$todir/\"" "$fromdir" "$todir" skip_file_diff
 
 # The script would have aborted on error, so getting here means we've won.
 exit 0

testsuite/duplicates.test

@@ -19,15 +19,12 @@
 
 # This test is not great, because it is a timing-dependent bug.
 
-. $srcdir/testsuite/rsync.fns
+. "$suitedir/rsync.fns"
 
 set -x
 
 # Build some hardlinks
 
-fromdir="$scratchdir/from"
-todir="$scratchdir/to"
-
 mkdir "$fromdir"
 name1="$fromdir/name1"
 name2="$fromdir/name2"

testsuite/exclude.test

@@ -1,6 +1,6 @@
 #! /bin/sh
 
-# Copyright (C) 2003 by Wayne Davison <wayned@samba.org>
+# Copyright (C) 2003, 2004, 2005 by Wayne Davison <wayned@samba.org>
 
 # This program is distributable under the terms of the GNU GPL see
 # COPYING).
@@ -10,46 +10,78 @@
 # Test some of the more obscure wildcard handling of exclude/include
 # processing.
 
-. $srcdir/testsuite/rsync.fns
-
-set -x
+. "$suitedir/rsync.fns"
 
 HOME="$scratchdir"
 CVSIGNORE='*.junk'
 export HOME CVSIGNORE
 
+set -x
+
 # Build some files/dirs/links to copy
 
-fromdir="$scratchdir/from"
-todir="$scratchdir/to"
-chkdir="$scratchdir/chk"
-
-echo home-cvs-exclude >"$scratchdir"/.cvsignore
 makepath "$fromdir/foo/down/to/you"
 makepath "$fromdir/bar/down/to/foo/too"
+makepath "$fromdir/bar/down/to/bar/baz"
 makepath "$fromdir/mid/for/foo/and/that/is/who"
+cat >"$fromdir/.filt" <<EOF
+exclude down
+: .filt-temp
+clear
+- .filt
+- *.bak
+- *.old
+EOF
 echo kept >"$fromdir/foo/file1"
 echo removed >"$fromdir/foo/file2"
 echo cvsout >"$fromdir/foo/file2.old"
+cat >"$fromdir/foo/.filt" <<EOF
+include .filt
+- file1
+EOF
+cat >"$fromdir/bar/.filt" <<EOF
+- home-cvs-exclude
+dir-merge .filt2
++ to
+EOF
+echo cvsout >"$fromdir/bar/down/to/home-cvs-exclude"
+cat >"$fromdir/bar/down/to/.filt2" <<EOF
+- .filt2
+EOF
+cat >"$fromdir/bar/down/to/foo/.filt2" <<EOF
++ *.junk
+EOF
 echo keeper >"$fromdir/bar/down/to/foo/file1"
 echo cvsout >"$fromdir/bar/down/to/foo/file1.bak"
 echo gone >"$fromdir/bar/down/to/foo/file3"
 echo lost >"$fromdir/bar/down/to/foo/file4"
-echo cvsout >"$fromdir/bar/down/to/foo/file4.junk"
+echo weird >"$fromdir/bar/down/to/foo/+ file3"
+echo cvsout-but-filtin >"$fromdir/bar/down/to/foo/file4.junk"
 echo smashed >"$fromdir/bar/down/to/foo/to"
-echo cvsout >"$fromdir/bar/down/to/home-cvs-exclude"
+cat >"$fromdir/bar/down/to/bar/.filt2" <<EOF
+- *.deep
+EOF
+echo filtout >"$fromdir/bar/down/to/bar/baz/file5.deep"
+# This one should be ineffectual
+cat >"$fromdir/mid/.filt2" <<EOF
+- extra
+EOF
 echo cvsout >"$fromdir/mid/one-in-one-out"
 echo one-in-one-out >"$fromdir/mid/.cvsignore"
 echo cvsin >"$fromdir/mid/one-for-all"
+cat >"$fromdir/mid/.filt" <<EOF
+:C
+EOF
+echo cvsin >"$fromdir/mid/for/one-in-one-out"
 echo expunged >"$fromdir/mid/for/foo/extra"
 echo retained >"$fromdir/mid/for/foo/keep"
-echo cvsin >"$fromdir/mid/for/one-in-one-out"
 ln -s too "$fromdir/bar/down/to/foo/sym"
 
-# Setup our test exclude/include file.
+# Setup our test exclude/include files.
 
 excl="$scratchdir/exclude-from"
 cat >"$excl" <<EOF
+!
 # If the second line of these two lines does anything, it's a bug.
 + **/bar
 - /bar
@@ -65,6 +97,10 @@ cat >"$excl" <<EOF
 - /mid/for/foo/extra
 EOF
 
+cat >"$scratchdir/.cvsignore" <<EOF
+home-cvs-exclude
+EOF
+
 # Create the chk dir with what we expect to be excluded
 
 checkit "$RSYNC -avv \"$fromdir/\" \"$chkdir/\"" "$fromdir" "$chkdir"
@@ -83,7 +119,8 @@ $RSYNC -av --existing --include='*/' --exclude='*' "$fromdir/" "$chkdir/"
 
 # Now, test if rsync excludes the same files.
 
-checkit "$RSYNC -avv --exclude-from=$excl \"$fromdir/\" \"$todir/\"" "$chkdir" "$todir"
+checkit "$RSYNC -avv --exclude-from=\"$excl\" \
+    --delete-during \"$fromdir/\" \"$todir/\"" "$chkdir" "$todir"
 
 # Modify the chk dir by removing cvs-ignored files and then tweaking the dir times.
 
@@ -93,12 +130,70 @@ rm "$chkdir"/bar/down/to/foo/*.junk
 rm "$chkdir"/bar/down/to/home-cvs-exclude
 rm "$chkdir"/mid/one-in-one-out
 
-$RSYNC -av --existing --include='*/' --exclude='*' "$fromdir/" "$chkdir/"
+$RSYNC -av --existing --filter='exclude,! */' "$fromdir/" "$chkdir/"
 
 # Now, test if rsync excludes the same files, this time with --cvs-exclude
 # and --delete-excluded.
 
-checkit "$RSYNC -avvC --delete-excluded --exclude-from=$excl \
+checkit "$RSYNC -avvC --filter=\"merge $excl\" --delete-excluded \
+    --delete-during \"$fromdir/\" \"$todir/\"" "$chkdir" "$todir"
+
+# Modify the chk dir for our merge-exclude test and then tweak the dir times.
+
+rm "$chkdir"/foo/file1
+rm "$chkdir"/bar/down/to/bar/baz/*.deep
+cp -p "$fromdir"/bar/down/to/foo/*.junk "$chkdir"/bar/down/to/foo
+cp -p "$fromdir"/bar/down/to/foo/to "$chkdir"/bar/down/to/foo
+
+$RSYNC -av --existing -f 'show .filt*' -f 'hide,! */' --del "$fromdir/" "$todir/"
+
+echo retained >"$todir"/bar/down/to/bar/baz/nodel.deep
+cp -p "$todir"/bar/down/to/bar/baz/nodel.deep "$chkdir"/bar/down/to/bar/baz
+
+$RSYNC -av --existing --filter='-! */' "$fromdir/" "$chkdir/"
+
+# Now, test if rsync excludes the same files, this time with a merge-exclude
+# file.
+
+checkit "sed '/!/d' \"$excl\" |
+    $RSYNC -avv -f dir-merge_.filt -f merge_- \
+    --delete-during \"$fromdir/\" \"$todir/\"" "$chkdir" "$todir"
+
+# Remove the files that will be deleted.
+
+rm "$chkdir"/.filt
+rm "$chkdir"/bar/.filt
+rm "$chkdir"/bar/down/to/.filt2
+rm "$chkdir"/bar/down/to/foo/.filt2
+rm "$chkdir"/bar/down/to/bar/.filt2
+rm "$chkdir"/mid/.filt
+
+$RSYNC -av --protocol=28 --existing --include='*/' --exclude='*' "$fromdir/" "$chkdir/"
+
+# Now, try the prior command with --delete-before and some side-specific
+# rules.
+
+checkit "sed '/!/d' \"$excl\" |
+    $RSYNC -avv -f :s_.filt -f .s_- -f P_nodel.deep \
+    --delete-before \"$fromdir/\" \"$todir/\"" "$chkdir" "$todir"
+
+# Next, we'll test some rule-restricted filter files.
+
+cat >"$fromdir/bar/down/.excl" <<EOF
+file3
+EOF
+cat >"$fromdir/bar/down/to/foo/.excl" <<EOF
++ file3
+*.bak
+EOF
+$RSYNC -av --del "$fromdir/" "$chkdir/"
+rm "$chkdir/bar/down/to/foo/file1.bak"
+rm "$chkdir/bar/down/to/foo/file3"
+rm "$chkdir/bar/down/to/foo/+ file3"
+$RSYNC -av --existing --filter='-! */' "$fromdir/" "$chkdir/"
+$RSYNC -av --delete-excluded --exclude='*' "$fromdir/" "$todir/"
+
+checkit "$RSYNC -avv -f dir-merge,-_.excl \
     \"$fromdir/\" \"$todir/\"" "$chkdir" "$todir"
 
 # The script would have aborted on error, so getting here means we've won.

testsuite/fuzzy.test

@@ -0,0 +1,25 @@
+#! /bin/sh
+
+# Copyright (C) 2005 by Wayne Davison <wayned@samba.org>
+
+# This program is distributable under the terms of the GNU GPL see
+# COPYING).
+
+# Test rsync handling of the --fuzzy option.
+
+. "$suitedir/rsync.fns"
+
+set -x
+
+mkdir "$fromdir"
+mkdir "$todir"
+
+cp -p "$srcdir"/rsync.c "$fromdir"/rsync.c
+cp -p "$fromdir"/rsync.c "$todir"/rsync2.c
+
+# Let's do it!
+checkit "$RSYNC -avvi --no-whole-file --fuzzy --delete-after \
+    \"$fromdir/\" \"$todir/\"" "$fromdir" "$todir"
+
+# The script would have aborted on error, so getting here means we've won.
+exit 0

testsuite/hands.test

@@ -11,19 +11,19 @@ hands_setup
 
 # Main script starts here
 
-runtest "basic operation" 'checkit "$RSYNC -av ${FROM}/ ${TO}" ${FROM}/ ${TO}'
+runtest "basic operation" 'checkit "$RSYNC -av \"$fromdir/\" \"$todir\"" "$fromdir/" "$todir"'
 
-ln ${FROM}/filelist ${FROM}/dir
-runtest "hard links" 'checkit "$RSYNC -avH ${FROM}/ ${TO}" ${FROM}/ ${TO}'
+ln "$fromdir/filelist" "$fromdir/dir"
+runtest "hard links" 'checkit "$RSYNC -avH \"$fromdir/\" \"$todir\"" "$fromdir/" "$todir"'
 
-rm ${TO}/text
-runtest "one file" 'checkit "$RSYNC -avH ${FROM}/ ${TO}" ${FROM}/ ${TO}'
+rm "$todir/text"
+runtest "one file" 'checkit "$RSYNC -avH \"$fromdir/\" \"$todir\"" "$fromdir/" "$todir"'
 
-echo "extra line" >> ${TO}/text
-runtest "extra data" 'checkit "$RSYNC -avH ${FROM}/ ${TO}" ${FROM}/ ${TO}'
+echo "extra line" >> "$todir/text"
+runtest "extra data" 'checkit "$RSYNC -avH \"$fromdir/\" \"$todir\"" "$fromdir/" "$todir"'
 
-cp ${FROM}/text ${TO}/ThisShouldGo
-runtest " --delete" 'checkit "$RSYNC --delete -avH ${FROM}/ ${TO}" ${FROM}/ ${TO}'
+cp "$fromdir/text" "$todir/ThisShouldGo"
+runtest " --delete" 'checkit "$RSYNC --delete -avH \"$fromdir/\" \"$todir\"" "$fromdir/" "$todir"'
 
 # The script would have aborted on error, so getting here means we've won.
 exit 0

testsuite/hardlinks.test

@@ -10,7 +10,7 @@
 # specify -H, then hard links are detected and recreated as hardlinks
 # on the other end.
 
-. $srcdir/testsuite/rsync.fns
+. "$suitedir/rsync.fns"
 
 set -x
 
@@ -31,7 +31,7 @@ ln "$name1" "$name2" || fail "Can't create hardlink"
 ln "$name2" "$name3" || fail "Can't create hardlink"
 cp "$name2" "$name4" || fail "Can't copy file"
 
-checkit "$RSYNC -aHvv \"$fromdir/\" \"$todir/\"" "$fromdir" "$todir"
+checkit "$RSYNC -aHivv \"$fromdir/\" \"$todir/\"" "$fromdir" "$todir"
 
 # The script would have aborted on error, so getting here means we've won.
 exit 0

testsuite/longdir.test

@@ -7,18 +7,22 @@
 
 . "$suitedir/rsync.fns"
 
-# set -x
+set -x
 
 hands_setup
 
-LONGNAME=This-is-a-directory-with-a-stupidly-long-name-created-in-an-attempt-to-provoke-an-error-found-in-2.0.11-that-should-hopefully-never-appear-again-if-this-test-does-its-job
-LONGDIR=$FROM/$LONGNAME/$LONGNAME/$LONGNAME
+longname=This-is-a-directory-with-a-stupidly-long-name-created-in-an-attempt-to-provoke-an-error-found-in-2.0.11-that-should-hopefully-never-appear-again-if-this-test-does-its-job
+longdir="$fromdir/$longname/$longname/$longname"
 
-makepath $LONGDIR || test_skipped "unable to create long directory"
-touch $LONGDIR/1 || test_skipped "unable to create files in long directory"
-date > ${LONGDIR}/1
-ls -la / > ${LONGDIR}/2
-checkit "$RSYNC --delete -avH ${FROM}/ ${TO}" ${FROM}/ ${TO}
+makepath "$longdir" || test_skipped "unable to create long directory"
+touch "$longdir/1" || test_skipped "unable to create files in long directory"
+date > "$longdir/1"
+if [ -r /etc ]; then
+    ls -la /etc >"$longdir/2"
+else
+    ls -la / >"$longdir/2"
+fi
+checkit "$RSYNC --delete -avH \"$fromdir/\" \"$todir\"" "$fromdir/" "$todir"
 
 # The script would have aborted on error, so getting here means we've won.
 exit 0

testsuite/merge.test

@@ -7,23 +7,20 @@
 
 # Make sure we can merge files from multiple directories into one.
 
-. $srcdir/testsuite/rsync.fns
+. "$suitedir/rsync.fns"
 
 set -x
 
 # Build some files/dirs/links to copy
 
-fromdir="$scratchdir/from"
 from1dir="${fromdir}1"
 from2dir="${fromdir}2"
 from3dir="${fromdir}3"
-todir="$scratchdir/to"
-chkdir="$scratchdir/chk"
 
 mkdir "$from1dir" "$from2dir" "$from3dir"
 mkdir "$from2dir"/sub1 "$from3dir"/sub1
-mkdir "$from3dir"/sub2
-mkdir "$chkdir" "$chkdir"/sub1 "$chkdir"/sub2
+mkdir "$from3dir"/sub2 "$from1dir"/dir-and-not-dir
+mkdir "$chkdir" "$chkdir"/sub1 "$chkdir"/sub2 "$chkdir"/dir-and-not-dir
 echo "one" >"$from1dir"/one
 cp -p "$from1dir"/one "$from2dir"/one
 cp -p "$from1dir"/one "$from3dir"/one
@@ -37,13 +34,19 @@ cp -p "$from2dir"/sub1/uno "$from3dir"/sub1/uno
 echo "sub2" >"$from3dir"/sub1/dos
 echo "sub3" >"$from2dir"/sub1/tres
 echo "subby" >"$from3dir"/sub2/subby
+echo "extra" >"$from1dir"/dir-and-not-dir/inside
+echo "not-dir" >"$from3dir"/dir-and-not-dir
 
 cp -p "$from1dir"/one "$from1dir"/two "$from2dir"/three "$from3dir"/four "$from1dir"/five "$from3dir"/six "$chkdir"
+cp -p "$from1dir"/dir-and-not-dir/inside "$chkdir"/dir-and-not-dir
 cp -p "$from2dir"/sub1/uno "$from3dir"/sub1/dos "$from2dir"/sub1/tres "$chkdir"/sub1
 cp -p "$from3dir"/sub2/subby "$chkdir"/sub2
 
 # Get rid of any directory-time differences
-$RSYNC -av --existing --include='*/' --exclude='*' "$from1dir/" "$from2dir/" "$from3dir/" "$chkdir/"
+$RSYNC -av --existing -f 'exclude,! */' "$from1dir/" "$from2dir/"
+$RSYNC -av --existing -f 'exclude,! */' "$from2dir/" "$from3dir/"
+$RSYNC -av --existing -f 'exclude,! */' "$from1dir/" "$chkdir/"
+$RSYNC -av --existing -f 'exclude,! */' "$from3dir/" "$chkdir/"
 
 checkit "$RSYNC -aHvv \"$from1dir/\" \"$from2dir/\" \"$from3dir/\" \"$todir/\"" "$chkdir" "$todir"
 

testsuite/rsync.fns

@@ -18,16 +18,15 @@
 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 
 
-TMP="$scratchdir"
-FROM=${TMP}/from
-TO=${TMP}/to
-LOG=${TMP}/log
-RSYNC="$rsync_bin"
+tmpdir="$scratchdir"
+fromdir="$tmpdir/from"
+todir="$tmpdir/to"
+chkdir="$tmpdir/chk"
 
 # Berkley's nice.
 PATH="$PATH:/usr/ucb"
 
-if diff -u $srcdir/testsuite/rsync.fns $srcdir/testsuite/rsync.fns >/dev/null 2>&1; then
+if diff -u "$srcdir/testsuite/rsync.fns" "$srcdir/testsuite/rsync.fns" >/dev/null 2>&1; then
     diffopt="-u"
 else
     diffopt="-c"
@@ -37,10 +36,10 @@ runtest() {
     echo $ECHO_N "Test $1: $ECHO_C"
     if eval "$2"
     then
-	echo "${ECHO_T}	done."
+	echo "$ECHO_T	done."
 	return 0
     else
-	echo "${ECHO_T} failed!"
+	echo "$ECHO_T failed!"
 	return 1
     fi
 }
@@ -51,7 +50,7 @@ printmsg() {
 
 
 rsync_ls_lR() {
-    find "$@" -print | sort | xargs "$TOOLDIR/tls"
+    find "$@" -print | sort | sed 's/ /\\ /g' | xargs "$TOOLDIR/tls"
 }
 
 rsync_getgroups() { 
@@ -60,16 +59,16 @@ rsync_getgroups() {
 
 
 ####################
-# Build test directories TO and FROM, with FROM full of files.
+# Build test directories $todir and $fromdir, with $fromdir full of files.
 
 hands_setup() {
     # Clean before creation
-    rm -rf $FROM
-    rm -rf $TO
+    rm -rf "$fromdir"
+    rm -rf "$todir"
 
-    [ -d $TMP ] || mkdir $TMP
-    [ -d $FROM ] || mkdir $FROM
-    [ -d $TO ] || mkdir $TO
+    [ -d "$tmpdir" ] || mkdir "$tmpdir"
+    [ -d "$fromdir" ] || mkdir "$fromdir"
+    [ -d "$todir" ] || mkdir "$todir"
 
     # On some BSD systems, the umask affects the mode of created
     # symlinks, even though the mode apparently has no effect on how
@@ -82,29 +81,37 @@ hands_setup() {
     # the same.  So, we need to set our umask before doing any creations.
 
     # set up test data
-    touch ${FROM}/empty
-    mkdir ${FROM}/emptydir
+    touch "$fromdir/empty"
+    mkdir "$fromdir/emptydir"
 
     # a hundred lines of text or so
-    rsync_ls_lR "${srcdir}" > ${FROM}/filelist
+    rsync_ls_lR "$srcdir" > "$fromdir/filelist"
 
-    # This might fail on systems that don't have -n
-    echo $ECHO_N "This file has no trailing lf$ECHO_C" > ${FROM}/nolf
+    echo $ECHO_N "This file has no trailing lf$ECHO_C" > "$fromdir/nolf"
     umask 0
-    ln -s nolf ${FROM}/nolf-symlink
+    ln -s nolf "$fromdir/nolf-symlink"
     umask 022
 
-    cat $srcdir/*.c > ${FROM}/text
-    mkdir ${FROM}/dir
-    cp ${FROM}/text ${FROM}/dir
-    mkdir ${FROM}/dir/subdir
-    mkdir ${FROM}/dir/subdir/subsubdir
-    ls -ltr /etc > ${FROM}/dir/subdir/subsubdir/etc-ltr-list
-    mkdir ${FROM}/dir/subdir/subsubdir2
-    ls -lt /bin > ${FROM}/dir/subdir/subsubdir2/bin-lt-list
+    cat $srcdir/*.c > "$fromdir/text"
+    mkdir "$fromdir/dir"
+    cp "$fromdir/text" "$fromdir/dir"
+    mkdir "$fromdir/dir/subdir"
+    echo some data > "$fromdir/dir/subdir/foobar.baz"
+    mkdir "$fromdir/dir/subdir/subsubdir"
+    if [ -r /etc ]; then
+	ls -ltr /etc > "$fromdir/dir/subdir/subsubdir/etc-ltr-list"
+    else
+	ls -ltr / > "$fromdir/dir/subdir/subsubdir/etc-ltr-list"
+    fi
+    mkdir "$fromdir/dir/subdir/subsubdir2"
+    if [ -r /bin ]; then
+	ls -lt /bin > "$fromdir/dir/subdir/subsubdir2/bin-lt-list"
+    else
+	ls -lt / > "$fromdir/dir/subdir/subsubdir2/bin-lt-list"
+    fi
 
 #      echo testing head:
-#      ls -lR ${srcdir} | head -10 || echo failed
+#      ls -lR "$srcdir" | head -10 || echo failed
 }
 
 
@@ -158,21 +165,24 @@ checkit() {
 	failed="YES";
     fi
 
-    echo "-------------"
-    echo "check how the files compare with diff:"
-    echo ""
-    for f in `cd "$2"; find . -type f -print `
-    do 
-        diff $diffopt "$2"/"$f" "$3"/"$f" || failed=YES
-    done
-
     echo "-------------"
     echo "check how the directory listings compare with diff:"
     echo ""
-    ( cd "$2" && rsync_ls_lR . ) > ${TMP}/ls-from 
-    ( cd "$3" && rsync_ls_lR . ) > ${TMP}/ls-to 
-    diff $diffopt ${TMP}/ls-from ${TMP}/ls-to || failed=YES
-    if [ -z "${failed}" ] ; then
+    ( cd "$2" && rsync_ls_lR . ) > "$tmpdir/ls-from"
+    ( cd "$3" && rsync_ls_lR . ) > "$tmpdir/ls-to"
+    diff $diffopt "$tmpdir/ls-from" "$tmpdir/ls-to" || failed=YES
+
+    echo "-------------"
+    echo "check how the files compare with diff:"
+    echo ""
+    if [ "x$4" != x ]; then
+	echo "  === Skipping (as directed) ==="
+    else
+	diff -r $diffopt "$2" "$3" || failed=YES
+    fi
+
+    echo "-------------"
+    if [ -z "$failed" ] ; then
 	return 0
     else
 	return 1
@@ -189,32 +199,31 @@ build_rsyncd_conf() {
     pidfile="$scratchdir/rsyncd.pid"
     logfile="$scratchdir/rsyncd.log"
 
-    cat >$conf <<EOF
+    cat >"$conf" <<EOF
 # rsyncd configuration file autogenerated by $0
 
 pid file = $pidfile
 use chroot = no
 hosts allow = localhost, 127.0.0.1
 log file = $logfile
+exclude = foobar.baz
 max verbosity = 9
 
 uid = 0
 gid = 0
 
 [test-from]
-	path = $FROM
+	path = $fromdir
 	read only = yes
 
 [test-to]
-	path = $TO
+	path = $todir
 	read only = no
 EOF
 }
 
 
 build_symlinks() {
-    fromdir="$scratchdir/from"
-    todir="$scratchdir/to"
     mkdir "$fromdir"
     date >"$fromdir/referent"
     ln -s referent "$fromdir/relative"
@@ -230,7 +239,7 @@ test_fail() {
 
 test_skipped() {
     echo "$@" >&2
-    echo "$@" > "$TMP/whyskipped"
+    echo "$@" > "$tmpdir/whyskipped"
     exit 77
 }
 

testsuite/ssh-basic.test

@@ -24,11 +24,11 @@ if ! [ "`ssh -o'BatchMode yes' localhost echo yes`" = "yes" ]; then
 fi
 
 # Added by Steve Bonds Feb 2 2003
-# Without this, there are no files in the ${FROM} directory, so rsync has
+# Without this, there are no files in the $fromdir directory, so rsync has
 # nothing to do.
 hands_setup
 
-runtest "ssh: basic test" 'checkit "$RSYNC -avH -e ssh --rsync-path=$RSYNC ${FROM}/ localhost:${TO}" ${FROM}/ ${TO}'
+runtest "ssh: basic test" 'checkit "$RSYNC -avH -e ssh --rsync-path=\"$RSYNC\" \"$fromdir/\" \"localhost:$todir\"" "$fromdir/" "$todir"'
 
 # Added by Steve Bonds Feb 2 2003
 # I assumed that "F1" was intended to hold a single file for testing if
@@ -36,8 +36,8 @@ runtest "ssh: basic test" 'checkit "$RSYNC -avH -e ssh --rsync-path=$RSYNC ${FRO
 # it was unset so the "mv" tried to move a parent directory into a
 # subdirectory of itself.  There is probably a better way of pulling out
 # a sample file to rename.
-F1=`ls ${TO} | head -5 | tail -1`
+F1=`ls "$todir" | head -5 | tail -1`
 
-mv ${TO}/${F1} ${TO}/ThisShouldGo
+mv "$todir/$F1" "$todir/ThisShouldGo"
 
-runtest "ssh: renamed file" 'checkit "$RSYNC --delete -avH -e ssh --rsync-path=$RSYNC ${FROM}/ localhost:${TO}" ${FROM}/ ${TO}'
+runtest "ssh: renamed file" 'checkit "$RSYNC --delete -avH -e ssh --rsync-path=\"$RSYNC\" \"$fromdir/\" \"localhost:$todir\"" "$fromdir/" "$todir"'

testsuite/symlink-ignore.test

@@ -8,7 +8,7 @@
 # Test rsync's somewhat over-featured symlink control: the default
 # behaviour is that symlinks should not be copied at all.
 
-. $srcdir/testsuite/rsync.fns
+. "$suitedir/rsync.fns"
 
 set -x
 
@@ -18,19 +18,19 @@ build_symlinks || test_fail "failed to build symlinks"
 # should be missing.
 $RSYNC -r "$fromdir/" "$todir" || test_fail "$RSYNC returned $?"
 
-[ -f "${todir}/referent" ] || test_fail "referent was not copied"
-[ -d "${todir}/from" ] && test_fail "extra level of directories"
-if is_a_link "${todir}/dangling" 
+[ -f "$todir/referent" ] || test_fail "referent was not copied"
+[ -d "$todir/from" ] && test_fail "extra level of directories"
+if is_a_link "$todir/dangling" 
 then 
     test_fail "dangling symlink was copied"
 fi
 
-if is_a_link "${todir}/relative" 
+if is_a_link "$todir/relative" 
 then
     test_fail "relative symlink was copied" 
 fi
 
-if is_a_link "${todir}/absolute" 
+if is_a_link "$todir/absolute" 
 then
     test_fail "absolute symlink was copied"
 fi

testsuite/trimslash.test

@@ -7,7 +7,7 @@
 
 # Test tiny function to trim trailing slashes.
 
-. $srcdir/testsuite/rsync.fns
+. "$suitedir/rsync.fns"
 
 set -x
 

testsuite/unsafe-byname.test

@@ -4,7 +4,7 @@
 
 # Call directly into unsafe_symlink and test its handling of various filenames
 
-. $srcdir/testsuite/rsync.fns
+. "$suitedir/rsync.fns"
 
 test_unsafe() {
     # $1 is the target of a symlink

testsuite/unsafe-links.test

@@ -2,7 +2,7 @@
 
 # Originally by Vladim<69>r Michl <Vladimir.Michl@hlubocky.del.cz>
 
-. $srcdir/testsuite/rsync.fns
+. "$suitedir/rsync.fns"
 
 test_symlink() {
 	is_a_link "$1" || test_fail "File $1 is not a symlink"
@@ -14,7 +14,7 @@ test_regular() {
 	fi;
 };
 
-cd "$TMP"
+cd "$tmpdir"
 
 mkdir from
 

testsuite/wildmatch.test

@@ -7,7 +7,7 @@
 
 # Test the wildmatch functionality
 
-. $srcdir/testsuite/rsync.fns
+. "$suitedir/rsync.fns"
 
 set -x
 

tls.c

@@ -49,17 +49,16 @@ int list_only = 0;
 int preserve_perms = 0;
 
 
-static void failed (char const *what,
-		    char const *where)
+static void failed(char const *what, char const *where)
 {
-	fprintf (stderr, PROGRAM ": %s %s: %s\n",
-		 what, where, strerror (errno));
-	exit (1);
+	fprintf(stderr, PROGRAM ": %s %s: %s\n",
+		what, where, strerror(errno));
+	exit(1);
 }
 
 
 
-static void list_file (const char *fname)
+static void list_file(const char *fname)
 {
 	STRUCT_STAT buf;
 	char permbuf[PERMSTRING_SIZE];
@@ -67,8 +66,8 @@ static void list_file (const char *fname)
 	char datebuf[50];
 	char linkbuf[4096];
 
-	if (do_lstat(fname, &buf) == -1)
-		failed ("stat", fname);
+	if (do_lstat(fname, &buf) < 0)
+		failed("stat", fname);
 
 	/* The size of anything but a regular file is probably not
 	 * worth thinking about. */
@@ -114,7 +113,7 @@ static void list_file (const char *fname)
 	/* TODO: Perhaps escape special characters in fname? */
 
 	printf("%s ", permbuf);
-	if (IS_DEVICE(buf.st_mode)) {
+	if (S_ISCHR(buf.st_mode) || S_ISBLK(buf.st_mode)) {
 		printf("%5ld,%6ld",
 		    (long)major(buf.st_rdev),
 		    (long)minor(buf.st_rdev));
@@ -130,13 +129,13 @@ int
 main(int argc, char *argv[])
 {
 	if (argc < 2) {
-		fprintf (stderr, "usage: " PROGRAM " DIR ...\n"
-			 "Trivial file listing program for portably checking rsync\n");
+		fprintf(stderr, "usage: " PROGRAM " DIR ...\n"
+			"Trivial file listing program for portably checking rsync\n");
 		return 1;
 	}
 
 	for (argv++; *argv; argv++) {
-		list_file (*argv);
+		list_file(*argv);
 	}
 
 	return 0;

token.c

@@ -1,17 +1,17 @@
-/* 
+/*
    Copyright (C) Andrew Tridgell 1996
    Copyright (C) Paul Mackerras 1996
-   
+
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
-   
+
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-   
+
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
@@ -21,23 +21,26 @@
 #include "zlib/zlib.h"
 
 extern int do_compression;
+extern int module_id;
+
 static int compression_level = Z_DEFAULT_COMPRESSION;
 
 /* determine the compression level based on a wildcard filename list */
 void set_compression(char *fname)
 {
-	extern int module_id;
 	char *dont;
 	char *tok;
 
-	if (!do_compression) return;
+	if (!do_compression)
+		return;
 
 	compression_level = Z_DEFAULT_COMPRESSION;
 	dont = lp_dont_compress(module_id);
 
-	if (!dont || !*dont) return;
+	if (!dont || !*dont)
+		return;
 
-	if ((dont[0] == '*') && (!dont[1])) {
+	if (dont[0] == '*' && !dont[1]) {
 		/* an optimization to skip the rest of this routine */
 		compression_level = 0;
 		return;
@@ -45,12 +48,13 @@ void set_compression(char *fname)
 
 	dont = strdup(dont);
 	fname = strdup(fname);
-	if (!dont || !fname) return;
+	if (!dont || !fname)
+		return;
 
 	strlower(dont);
 	strlower(fname);
 
-	for (tok=strtok(dont," ");tok;tok=strtok(NULL," ")) {
+	for (tok = strtok(dont, " "); tok; tok = strtok(NULL, " ")) {
 		if (wildmatch(tok, fname)) {
 			compression_level = 0;
 			break;
@@ -61,20 +65,22 @@ void set_compression(char *fname)
 }
 
 /* non-compressing recv token */
-static int simple_recv_token(int f,char **data)
+static int32 simple_recv_token(int f, char **data)
 {
-	static int residue;
+	static int32 residue;
 	static char *buf;
-	int n;
+	int32 n;
 
 	if (!buf) {
 		buf = new_array(char, CHUNK_SIZE);
-		if (!buf) out_of_memory("simple_recv_token");
+		if (!buf)
+			out_of_memory("simple_recv_token");
 	}
 
 	if (residue == 0) {
-		int i = read_int(f);
-		if (i <= 0) return i;
+		int32 i = read_int(f);
+		if (i <= 0)
+			return i;
 		residue = i;
 	}
 
@@ -87,33 +93,21 @@ static int simple_recv_token(int f,char **data)
 
 
 /* non-compressing send token */
-static void simple_send_token(int f,int token,
-			      struct map_struct *buf,OFF_T offset,int n)
+static void simple_send_token(int f, int32 token, struct map_struct *buf,
+			      OFF_T offset, int32 n)
 {
-	extern int write_batch;
-	int hold_int;
-
 	if (n > 0) {
-		int l = 0;
-		while (l < n) {
-			int n1 = MIN(CHUNK_SIZE,n-l);
-			write_int(f,n1);
-			write_buf(f,map_ptr(buf,offset+l,n1),n1);
-			if (write_batch) {
-				write_batch_delta_file( (char *) &n1, sizeof(int) );
-				write_batch_delta_file(map_ptr(buf,offset+l,n1),n1);
-			}
-			l += n1;
+		int32 len = 0;
+		while (len < n) {
+			int32 n1 = MIN(CHUNK_SIZE, n-len);
+			write_int(f, n1);
+			write_buf(f, map_ptr(buf, offset+len, n1), n1);
+			len += n1;
 		}
 	}
 	/* a -2 token means to send data only and no token */
-	if (token != -2) {
-		write_int(f,-(token+1));
-		if (write_batch) {
-			hold_int = -(token+1);
-			write_batch_delta_file( (char *) &hold_int, sizeof(int) );
-		}
-	}
+	if (token != -2)
+		write_int(f, -(token+1));
 }
 
 
@@ -134,9 +128,9 @@ static void simple_send_token(int f,int token,
 #define AVAIL_OUT_SIZE(avail_in_size) ((avail_in_size)*1001/1000+16)
 
 /* For coding runs of tokens */
-static int last_token = -1;
-static int run_start;
-static int last_run_end;
+static int32 last_token = -1;
+static int32 run_start;
+static int32 last_run_end;
 
 /* Deflation state */
 static z_stream tx_strm;
@@ -154,13 +148,11 @@ static char *obuf;
 
 /* Send a deflated token */
 static void
-send_deflated_token(int f, int token,
-		    struct map_struct *buf, OFF_T offset, int nb, int toklen)
+send_deflated_token(int f, int32 token, struct map_struct *buf, OFF_T offset,
+		    int32 nb, int32 toklen)
 {
-	int n, r;
+	int32 n, r;
 	static int init_done, flush_pending;
-	extern int write_batch;
-	char temp_byte;
 
 	if (last_token == -1) {
 		/* initialization */
@@ -193,28 +185,13 @@ send_deflated_token(int f, int token,
 		n = last_token - run_start;
 		if (r >= 0 && r <= 63) {
 			write_byte(f, (n==0? TOKEN_REL: TOKENRUN_REL) + r);
-			if (write_batch) {
-				temp_byte = (char)( (n==0? TOKEN_REL: TOKENRUN_REL) + r);
-				write_batch_delta_file(&temp_byte,sizeof(char));
-			}
 		} else {
 			write_byte(f, (n==0? TOKEN_LONG: TOKENRUN_LONG));
 			write_int(f, run_start);
-			if (write_batch) {
-				temp_byte = (char)(n==0? TOKEN_LONG: TOKENRUN_LONG);
-				write_batch_delta_file(&temp_byte,sizeof(char));
-				write_batch_delta_file((char *)&run_start,sizeof(run_start));
-			}
 		}
 		if (n != 0) {
 			write_byte(f, n);
 			write_byte(f, n >> 8);
-			if (write_batch) {
-				temp_byte = (char)n;
-				write_batch_delta_file(&temp_byte,sizeof(char));
-				temp_byte = (char)(n >> 8);
-				write_batch_delta_file(&temp_byte,sizeof(char));
-			}
 		}
 		last_run_end = last_token;
 		run_start = token;
@@ -273,8 +250,6 @@ send_deflated_token(int f, int token,
 					obuf[0] = DEFLATED_DATA + (n >> 8);
 					obuf[1] = n;
 					write_buf(f, obuf, n+2);
-					if (write_batch)
-						write_batch_delta_file(obuf,n+2);
 				}
 			}
 		} while (nb != 0 || tx_strm.avail_out == 0);
@@ -284,24 +259,25 @@ send_deflated_token(int f, int token,
 	if (token == -1) {
 		/* end of file - clean up */
 		write_byte(f, END_FLAG);
-		if (write_batch) {
-			temp_byte = END_FLAG;
-			write_batch_delta_file(&temp_byte,sizeof(char));
-		}
-
 	} else if (token != -2) {
-		/* add the data in the current block to the compressor's
-		   history and hash table */
-		tx_strm.next_in = (Bytef *) map_ptr(buf, offset, toklen);
-		tx_strm.avail_in = toklen;
-		tx_strm.next_out = (Bytef *) obuf;
-		tx_strm.avail_out = AVAIL_OUT_SIZE(CHUNK_SIZE);
-		r = deflate(&tx_strm, Z_INSERT_ONLY);
-		if (r != Z_OK || tx_strm.avail_in != 0) {
-			rprintf(FERROR, "deflate on token returned %d (%d bytes left)\n",
-				r, tx_strm.avail_in);
-			exit_cleanup(RERR_STREAMIO);
-		}
+		/* Add the data in the current block to the compressor's
+		 * history and hash table. */
+		do {
+			/* Break up long sections in the same way that
+			 * see_deflate_token() does. */
+			int32 n1 = toklen > 0xffff ? 0xffff : toklen;
+			toklen -= n1;
+			tx_strm.next_in = (Bytef *)map_ptr(buf, offset, n1);
+			tx_strm.avail_in = n1;
+			tx_strm.next_out = (Bytef *) obuf;
+			tx_strm.avail_out = AVAIL_OUT_SIZE(CHUNK_SIZE);
+			r = deflate(&tx_strm, Z_INSERT_ONLY);
+			if (r != Z_OK || tx_strm.avail_in != 0) {
+				rprintf(FERROR, "deflate on token returned %d (%d bytes left)\n",
+					r, tx_strm.avail_in);
+				exit_cleanup(RERR_STREAMIO);
+			}
+		} while (toklen > 0);
 	}
 }
 
@@ -315,16 +291,16 @@ static char *cbuf;
 static char *dbuf;
 
 /* for decoding runs of tokens */
-static int rx_token;
-static int rx_run;
+static int32 rx_token;
+static int32 rx_run;
 
 /* Receive a deflated token and inflate it */
-static int
-recv_deflated_token(int f, char **data)
+static int32 recv_deflated_token(int f, char **data)
 {
-	int n, r, flag;
 	static int init_done;
-	static int saved_flag;
+	static int32 saved_flag;
+	int32 n, flag;
+	int r;
 
 	for (;;) {
 		switch (recv_state) {
@@ -451,9 +427,10 @@ recv_deflated_token(int f, char **data)
  * put the data corresponding to a token that we've just returned
  * from recv_deflated_token into the decompressor's history buffer.
  */
-static void see_deflate_token(char *buf, int len)
+static void see_deflate_token(char *buf, int32 len)
 {
-	int r, blklen;
+	int r;
+	int32 blklen;
 	unsigned char hdr[5];
 
 	rx_strm.avail_in = 0;
@@ -491,17 +468,16 @@ static void see_deflate_token(char *buf, int len)
 
 /**
  * Transmit a verbatim buffer of length @p n followed by a token.
- * If token == -1 then we have reached EOF 
+ * If token == -1 then we have reached EOF
  * If n == 0 then don't send a buffer
  */
-void send_token(int f,int token,struct map_struct *buf,OFF_T offset,
-		int n,int toklen)
+void send_token(int f, int32 token, struct map_struct *buf, OFF_T offset,
+		int32 n, int32 toklen)
 {
-	if (!do_compression) {
-		simple_send_token(f,token,buf,offset,n);
-	} else {
+	if (!do_compression)
+		simple_send_token(f, token, buf, offset, n);
+	else
 		send_deflated_token(f, token, buf, offset, n, toklen);
-	}
 }
 
 
@@ -511,7 +487,7 @@ void send_token(int f,int token,struct map_struct *buf,OFF_T offset,
  * if the return value is -i then it represents token i-1
  * if the return value is 0 then the end has been reached
  */
-int recv_token(int f,char **data)
+int32 recv_token(int f, char **data)
 {
 	int tok;
 
@@ -526,7 +502,7 @@ int recv_token(int f,char **data)
 /*
  * look at the data corresponding to a token, if necessary
  */
-void see_token(char *data, int toklen)
+void see_token(char *data, int32 toklen)
 {
 	if (do_compression)
 		see_deflate_token(data, toklen);

uidlist.c

@@ -26,7 +26,7 @@
 #include "rsync.h"
 
 #ifdef HAVE_GETGROUPS
-# if !defined(GETGROUPS_T)
+# ifndef GETGROUPS_T
 #  define GETGROUPS_T gid_t
 # endif
 #endif

util.c

@@ -28,7 +28,11 @@
 #include "rsync.h"
 
 extern int verbose;
-extern struct exclude_list_struct server_exclude_list;
+extern int dry_run;
+extern int module_id;
+extern int modify_window;
+extern char *partial_dir;
+extern struct filter_list_struct server_filter_list;
 
 int sanitize_paths = 0;
 
@@ -75,7 +79,7 @@ int fd_pair(int fd[2])
 {
 	int ret;
 
-#if HAVE_SOCKETPAIR
+#ifdef HAVE_SOCKETPAIR
 	ret = socketpair(AF_UNIX, SOCK_STREAM, 0, fd);
 #else
 	ret = pipe(fd);
@@ -101,9 +105,9 @@ void print_child_argv(char **cmd)
 			   "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
 			   "0123456789"
 			   ",.-_=+@/") != strlen(*cmd)) {
-			rprintf(FINFO, "\"%s\" ", *cmd);
+			rprintf(FINFO, "\"%s\" ", safe_fname(*cmd));
 		} else {
-			rprintf(FINFO, "%s ", *cmd);
+			rprintf(FINFO, "%s ", safe_fname(*cmd));
 		}
 	}
 	rprintf(FINFO, "\n");
@@ -126,23 +130,22 @@ void overflow(char *str)
 
 int set_modtime(char *fname, time_t modtime)
 {
-	extern int dry_run;
-	if (dry_run)
-		return 0;
-
 	if (verbose > 2) {
 		rprintf(FINFO, "set modtime of %s to (%ld) %s",
-			fname, (long) modtime,
+			safe_fname(fname), (long)modtime,
 			asctime(localtime(&modtime)));
 	}
 
+	if (dry_run)
+		return 0;
+
 	{
 #ifdef HAVE_UTIMBUF
 		struct utimbuf tbuf;
 		tbuf.actime = time(NULL);
 		tbuf.modtime = modtime;
 		return utime(fname,&tbuf);
-#elif defined(HAVE_UTIME)
+#elif defined HAVE_UTIME
 		time_t t[2];
 		t[0] = time(NULL);
 		t[1] = modtime;
@@ -194,7 +197,7 @@ int create_directory_path(char *fname, int base_umask)
  *
  * Derived from GNU C's cccp.c.
  */
-static int full_write(int desc, char *ptr, size_t len)
+int full_write(int desc, char *ptr, size_t len)
 {
 	int total_written;
 
@@ -242,7 +245,8 @@ static int safe_read(int desc, char *ptr, size_t len)
 
 /** Copy a file.
  *
- * This is used in conjunction with the --temp-dir option */
+ * This is used in conjunction with the --temp-dir, --backup, and
+ * --copy-dest options. */
 int copy_file(char *source, char *dest, mode_t mode)
 {
 	int ifd;
@@ -252,29 +256,25 @@ int copy_file(char *source, char *dest, mode_t mode)
 
 	ifd = do_open(source, O_RDONLY, 0);
 	if (ifd == -1) {
-		rprintf(FERROR,"open %s: %s\n",
-			full_fname(source), strerror(errno));
+		rsyserr(FERROR, errno, "open %s", full_fname(source));
 		return -1;
 	}
 
 	if (robust_unlink(dest) && errno != ENOENT) {
-		rprintf(FERROR,"unlink %s: %s\n",
-			full_fname(dest), strerror(errno));
+		rsyserr(FERROR, errno, "unlink %s", full_fname(dest));
 		return -1;
 	}
 
 	ofd = do_open(dest, O_WRONLY | O_CREAT | O_TRUNC | O_EXCL, mode);
 	if (ofd == -1) {
-		rprintf(FERROR,"open %s: %s\n",
-			full_fname(dest), strerror(errno));
+		rsyserr(FERROR, errno, "open %s", full_fname(dest));
 		close(ifd);
 		return -1;
 	}
 
 	while ((len = safe_read(ifd, buf, sizeof buf)) > 0) {
 		if (full_write(ofd, buf, len) < 0) {
-			rprintf(FERROR,"write %s: %s\n",
-				full_fname(dest), strerror(errno));
+			rsyserr(FERROR, errno, "write %s", full_fname(dest));
 			close(ifd);
 			close(ofd);
 			return -1;
@@ -282,21 +282,20 @@ int copy_file(char *source, char *dest, mode_t mode)
 	}
 
 	if (len < 0) {
-		rprintf(FERROR, "read %s: %s\n",
-			full_fname(source), strerror(errno));
+		rsyserr(FERROR, errno, "read %s", full_fname(source));
 		close(ifd);
 		close(ofd);
 		return -1;
 	}
 
 	if (close(ifd) < 0) {
-		rprintf(FINFO, "close failed on %s: %s\n",
-			full_fname(source), strerror(errno));
+		rsyserr(FINFO, errno, "close failed on %s",
+			full_fname(source));
 	}
 
 	if (close(ofd) < 0) {
-		rprintf(FERROR, "close failed on %s: %s\n",
-			full_fname(dest), strerror(errno));
+		rsyserr(FERROR, errno, "close failed on %s",
+			full_fname(dest));
 		return -1;
 	}
 
@@ -352,7 +351,7 @@ int robust_unlink(char *fname)
 
 	if (verbose > 0) {
 		rprintf(FINFO,"renaming %s to %s because of text busy\n",
-			fname, path);
+			safe_fname(fname), safe_fname(path));
 	}
 
 	/* maybe we should return rename()'s exit status? Nah. */
@@ -364,8 +363,8 @@ int robust_unlink(char *fname)
 #endif
 }
 
-/* Returns 0 on success, -1 on most errors, and -2 if we got an error
- * trying to copy the file across file systems. */
+/* Returns 0 on successful rename, 1 if we successfully copied the file
+ * across filesystems, -2 if copy_file() failed, and -1 on other errors. */
 int robust_rename(char *from, char *to, int mode)
 {
 	int tries = 4;
@@ -385,7 +384,7 @@ int robust_rename(char *from, char *to, int mode)
 			if (copy_file(from, to, mode) != 0)
 				return -2;
 			do_unlink(from);
-			return 0;
+			return 1;
 		default:
 			return -1;
 		}
@@ -442,7 +441,8 @@ void kill_all(int sig)
 int name_to_uid(char *name, uid_t *uid)
 {
 	struct passwd *pass;
-	if (!name || !*name) return 0;
+	if (!name || !*name)
+		return 0;
 	pass = getpwnam(name);
 	if (pass) {
 		*uid = pass->pw_uid;
@@ -455,7 +455,8 @@ int name_to_uid(char *name, uid_t *uid)
 int name_to_gid(char *name, gid_t *gid)
 {
 	struct group *grp;
-	if (!name || !*name) return 0;
+	if (!name || !*name)
+		return 0;
 	grp = getgrnam(name);
 	if (grp) {
 		*gid = grp->gr_gid;
@@ -479,14 +480,14 @@ int lock_range(int fd, int offset, int len)
 	return fcntl(fd,F_SETLK,&lock) == 0;
 }
 
-static int exclude_server_path(char *arg)
+static int filter_server_path(char *arg)
 {
 	char *s;
 
-	if (server_exclude_list.head) {
+	if (server_filter_list.head) {
 		for (s = arg; (s = strchr(s, '/')) != NULL; ) {
 			*s = '\0';
-			if (check_exclude(&server_exclude_list, arg, 1) < 0) {
+			if (check_filter(&server_filter_list, arg, 1) < 0) {
 				/* We must leave arg truncated! */
 				return 1;
 			}
@@ -496,75 +497,92 @@ static int exclude_server_path(char *arg)
 	return 0;
 }
 
-static void glob_expand_one(char *s, char **argv, int *argc, int maxargs)
+static void glob_expand_one(char *s, char ***argv_ptr, int *argc_ptr,
+			    int *maxargs_ptr)
 {
-#if !(defined(HAVE_GLOB) && defined(HAVE_GLOB_H))
-	if (!*s) s = ".";
-	s = argv[*argc] = strdup(s);
-	exclude_server_path(s);
-	(*argc)++;
+	char **argv = *argv_ptr;
+	int argc = *argc_ptr;
+	int maxargs = *maxargs_ptr;
+#if !defined HAVE_GLOB || !defined HAVE_GLOB_H
+	if (argc == maxargs) {
+		maxargs += MAX_ARGS;
+		if (!(argv = realloc_array(argv, char *, maxargs)))
+			out_of_memory("glob_expand_one");
+		*argv_ptr = argv;
+		*maxargs_ptr = maxargs;
+	}
+	if (!*s)
+		s = ".";
+	s = argv[argc++] = strdup(s);
+	filter_server_path(s);
 #else
-	extern int sanitize_paths;
 	glob_t globbuf;
 	int i;
 
-	if (!*s) s = ".";
+	if (maxargs <= argc)
+		return;
+	if (!*s)
+		s = ".";
 
-	s = argv[*argc] = strdup(s);
-	if (sanitize_paths) {
-		sanitize_path(s, NULL);
-	}
+	if (sanitize_paths)
+		s = sanitize_path(NULL, s, "", 0);
+	else
+		s = strdup(s);
 
 	memset(&globbuf, 0, sizeof globbuf);
-	if (!exclude_server_path(s))
+	if (!filter_server_path(s))
 		glob(s, 0, NULL, &globbuf);
-	if (globbuf.gl_pathc == 0) {
-		(*argc)++;
-		globfree(&globbuf);
-		return;
+	if (MAX((int)globbuf.gl_pathc, 1) > maxargs - argc) {
+		maxargs += globbuf.gl_pathc + MAX_ARGS;
+		if (!(argv = realloc_array(argv, char *, maxargs)))
+			out_of_memory("glob_expand_one");
+		*argv_ptr = argv;
+		*maxargs_ptr = maxargs;
 	}
-	for (i = 0; i < maxargs - *argc && i < (int)globbuf.gl_pathc; i++) {
-		if (i == 0)
-			free(s);
-		argv[*argc + i] = strdup(globbuf.gl_pathv[i]);
-		if (!argv[*argc + i])
-			out_of_memory("glob_expand");
+	if (globbuf.gl_pathc == 0)
+		argv[argc++] = s;
+	else {
+		int j = globbuf.gl_pathc;
+		free(s);
+		for (i = 0; i < j; i++) {
+			if (!(argv[argc++] = strdup(globbuf.gl_pathv[i])))
+				out_of_memory("glob_expand_one");
+		}
 	}
 	globfree(&globbuf);
-	*argc += i;
 #endif
+	*argc_ptr = argc;
 }
 
 /* This routine is only used in daemon mode. */
-void glob_expand(char *base1, char **argv, int *argc, int maxargs)
+void glob_expand(char *base1, char ***argv_ptr, int *argc_ptr, int *maxargs_ptr)
 {
-	char *s = argv[*argc];
+	char *s = (*argv_ptr)[*argc_ptr];
 	char *p, *q;
 	char *base = base1;
 	int base_len = strlen(base);
 
-	if (!s || !*s) return;
+	if (!s || !*s)
+		return;
 
 	if (strncmp(s, base, base_len) == 0)
 		s += base_len;
 
-	s = strdup(s);
-	if (!s) out_of_memory("glob_expand");
+	if (!(s = strdup(s)))
+		out_of_memory("glob_expand");
 
-	if (asprintf(&base," %s/", base1) <= 0) out_of_memory("glob_expand");
+	if (asprintf(&base," %s/", base1) <= 0)
+		out_of_memory("glob_expand");
 	base_len++;
 
-	q = s;
-	while ((p = strstr(q,base)) != NULL && *argc < maxargs) {
-		/* split it at this point */
-		*p = 0;
-		glob_expand_one(q, argv, argc, maxargs);
-		q = p + base_len;
+	for (q = s; *q; q = p + base_len) {
+		if ((p = strstr(q, base)) != NULL)
+			*p = '\0'; /* split it at this point */
+		glob_expand_one(q, argv_ptr, argc_ptr, maxargs_ptr);
+		if (!p)
+			break;
 	}
 
-	if (*q && *argc < maxargs)
-		glob_expand_one(q, argv, argc, maxargs);
-
 	free(s);
 	free(base);
 }
@@ -575,8 +593,8 @@ void glob_expand(char *base1, char **argv, int *argc, int maxargs)
 void strlower(char *s)
 {
 	while (*s) {
-		if (isupper(* (unsigned char *) s))
-			*s = tolower(* (unsigned char *) s);
+		if (isupper(*(unsigned char *)s))
+			*s = tolower(*(unsigned char *)s);
 		s++;
 	}
 }
@@ -633,118 +651,143 @@ size_t stringjoin(char *dest, size_t destsize, ...)
 	return ret;
 }
 
-void clean_fname(char *name)
+int count_dir_elements(const char *p)
 {
-	char *p;
-	int l;
-	int modified = 1;
-
-	if (!name) return;
-
-	while (modified) {
-		modified = 0;
-
-		if ((p = strstr(name,"/./")) != NULL) {
-			modified = 1;
-			while (*p) {
-				p[0] = p[2];
-				p++;
-			}
-		}
-
-		if ((p = strstr(name,"//")) != NULL) {
-			modified = 1;
-			while (*p) {
-				p[0] = p[1];
-				p++;
-			}
-		}
-
-		if (strncmp(p = name, "./", 2) == 0) {
-			modified = 1;
-			do {
-				p[0] = p[2];
-			} while (*p++);
-		}
-
-		l = strlen(p = name);
-		if (l > 1 && p[l-1] == '/') {
-			modified = 1;
-			p[l-1] = 0;
+	int cnt = 0, new_component = 1;
+	while (*p) {
+		if (*p++ == '/')
+			new_component = 1;
+		else if (new_component) {
+			new_component = 0;
+			cnt++;
 		}
 	}
+	return cnt;
 }
 
-/**
- * Make path appear as if a chroot had occurred:
- *
- * @li 1. remove leading "/" (or replace with "." if at end)
- *
- * @li 2. remove leading ".." components (except those allowed by @p reldir)
- *
- * @li 3. delete any other "<dir>/.." (recursively)
- *
- * Can only shrink paths, so sanitizes in place.
- *
- * While we're at it, remove double slashes and "." components like
- *   clean_fname() does, but DON'T remove a trailing slash because that
- *   is sometimes significant on command line arguments.
- *
- * If @p reldir is non-null, it is a sanitized directory that the path will be
- *    relative to, so allow as many ".." at the beginning of the path as
- *    there are components in reldir.  This is used for symbolic link targets.
- *    If reldir is non-null and the path began with "/", to be completely like
- *    a chroot we should add in depth levels of ".." at the beginning of the
- *    path, but that would blow the assumption that the path doesn't grow and
- *    it is not likely to end up being a valid symlink anyway, so just do
- *    the normal removal of the leading "/" instead.
- *
- * Contributed by Dave Dykstra <dwd@bell-labs.com>
- */
-void sanitize_path(char *p, char *reldir)
+/* Turns multiple adjacent slashes into a single slash, gets rid of "./"
+ * elements (but not a trailing dot dir), removes a trailing slash, and
+ * optionally collapses ".." elements (except for those at the start of the
+ * string).  If the resulting name would be empty, change it into a ".". */
+unsigned int clean_fname(char *name, BOOL collapse_dot_dot)
 {
-	char *start, *sanp;
-	int depth = 0;
-	int allowdotdot = 0;
+	char *limit = name - 1, *t = name, *f = name;
+	int anchored;
 
-	if (reldir) {
-		depth++;
-		while (*reldir) {
-			if (*reldir++ == '/') {
-				depth++;
+	if (!name)
+		return 0;
+
+	if ((anchored = *f == '/') != 0)
+		*t++ = *f++;
+	while (*f) {
+		/* discard extra slashes */
+		if (*f == '/') {
+			f++;
+			continue;
+		}
+		if (*f == '.') {
+			/* discard "." dirs (but NOT a trailing '.'!) */
+			if (f[1] == '/') {
+				f += 2;
+				continue;
+			}
+			/* collapse ".." dirs */
+			if (collapse_dot_dot
+			    && f[1] == '.' && (f[2] == '/' || !f[2])) {
+				char *s = t - 1;
+				if (s == name && anchored) {
+					f += 2;
+					continue;
+				}
+				while (s > limit && *--s != '/') {}
+				if (s != t - 1 && (s < name || *s == '/')) {
+					t = s + 1;
+					f += 2;
+					continue;
+				}
+				limit = t + 2;
 			}
 		}
+		while (*f && (*t++ = *f++) != '/') {}
 	}
-	start = p;
-	sanp = p;
-	while (*p == '/') {
-		/* remove leading slashes */
-		p++;
+
+	if (t > name+anchored && t[-1] == '/')
+		t--;
+	if (t == name)
+		*t++ = '.';
+	*t = '\0';
+
+	return t - name;
+}
+
+/* Make path appear as if a chroot had occurred.  This handles a leading
+ * "/" (either removing it or expanding it) and any leading or embedded
+ * ".." components that attempt to escape past the module's top dir.
+ *
+ * If dest is NULL, a buffer is allocated to hold the result.  It is legal
+ * to call with the dest and the path (p) pointing to the same buffer, but
+ * rootdir will be ignored to avoid expansion of the string.
+ *
+ * The rootdir string contains a value to use in place of a leading slash.
+ * Specify NULL to get the default of lp_path(module_id).
+ *
+ * If depth is >= 0, it is a count of how many '..'s to allow at the start
+ * of the path.  Use -1 to allow unlimited depth.
+ *
+ * We also clean the path in a manner similar to clean_fname() but with a
+ * few differences: 
+ *
+ * Turns multiple adjacent slashes into a single slash, gets rid of "." dir
+ * elements (INCLUDING a trailing dot dir), PRESERVES a trailing slash, and
+ * ALWAYS collapses ".." elements (except for those at the start of the
+ * string up to "depth" deep).  If the resulting name would be empty,
+ * change it into a ".". */
+char *sanitize_path(char *dest, const char *p, const char *rootdir, int depth)
+{
+	char *start, *sanp;
+	int rlen = 0;
+
+	if (dest != p) {
+		int plen = strlen(p);
+		if (*p == '/') {
+			if (!rootdir)
+				rootdir = lp_path(module_id);
+			rlen = strlen(rootdir);
+			depth = 0;
+			p++;
+		}
+		if (dest) {
+			if (rlen + plen + 1 >= MAXPATHLEN)
+				return NULL;
+		} else if (!(dest = new_array(char, rlen + plen + 1)))
+			out_of_memory("sanitize_path");
+		if (rlen) {
+			memcpy(dest, rootdir, rlen);
+			if (rlen > 1)
+				dest[rlen++] = '/';
+		}
 	}
+
+	start = sanp = dest + rlen;
 	while (*p != '\0') {
+		/* discard leading or extra slashes */
+		if (*p == '/') {
+			p++;
+			continue;
+		}
 		/* this loop iterates once per filename component in p.
 		 * both p (and sanp if the original had a slash) should
 		 * always be left pointing after a slash
 		 */
 		if (*p == '.' && (p[1] == '/' || p[1] == '\0')) {
 			/* skip "." component */
-			while (*++p == '/') {
-				/* skip following slashes */
-				;
-			}
+			p++;
 			continue;
 		}
-		allowdotdot = 0;
 		if (*p == '.' && p[1] == '.' && (p[2] == '/' || p[2] == '\0')) {
 			/* ".." component followed by slash or end */
-			if (depth > 0 && sanp == start) {
-				/* allow depth levels of .. at the beginning */
-				--depth;
-				allowdotdot = 1;
-			} else {
+			if (depth <= 0 || sanp != start) {
 				p += 2;
-				if (*p == '/')
-					p++;
 				if (sanp != start) {
 					/* back up sanp one level */
 					--sanp; /* now pointing at slash */
@@ -755,68 +798,21 @@ void sanitize_path(char *p, char *reldir)
 				}
 				continue;
 			}
-		}
-		while (1) {
-			/* copy one component through next slash */
-			*sanp++ = *p++;
-			if (*p == '\0' || p[-1] == '/') {
-				while (*p == '/') {
-					/* skip multiple slashes */
-					p++;
-				}
-				break;
-			}
-		}
-		if (allowdotdot) {
+			/* allow depth levels of .. at the beginning */
+			depth--;
 			/* move the virtual beginning to leave the .. alone */
-			start = sanp;
+			start = sanp + 3;
 		}
+		/* copy one component through next slash */
+		while (*p && (*sanp++ = *p++) != '/') {}
 	}
-	if (sanp == start && !allowdotdot) {
+	if (sanp == dest) {
 		/* ended up with nothing, so put in "." component */
-		/*
-		 * note that the !allowdotdot doesn't prevent this from
-		 *  happening in all allowed ".." situations, but I didn't
-		 *  think it was worth putting in an extra variable to ensure
-		 *  it since an extra "." won't hurt in those situations.
-		 */
 		*sanp++ = '.';
 	}
 	*sanp = '\0';
-}
 
-/* Works much like sanitize_path(), with these differences:  (1) a new buffer
- * is allocated for the sanitized path rather than modifying it in-place; (2)
- * a leading slash gets transformed into the rootdir value (which can be empty
- * or NULL if you just want the slash to get dropped); (3) no "reldir" can be
- * specified. */
-char *alloc_sanitize_path(const char *path, const char *rootdir)
-{
-	char *buf;
-	int rlen, plen = strlen(path);
-
-	if (*path == '/' && rootdir) {
-		rlen = strlen(rootdir);
-		if (rlen == 1)
-			path++;
-	} else
-		rlen = 0;
-	if (!(buf = new_array(char, rlen + plen + 1)))
-		out_of_memory("alloc_sanitize_path");
-	if (rlen)
-		memcpy(buf, rootdir, rlen);
-	memcpy(buf + rlen, path, plen + 1);
-
-	if (rlen > 1)
-		rlen++;
-	sanitize_path(buf + rlen, NULL);
-	if (rlen && buf[rlen] == '.' && buf[rlen+1] == '\0') {
-		if (rlen > 1)
-			rlen--;
-		buf[rlen] = '\0';
-	}
-
-	return buf;
+	return dest;
 }
 
 char curr_dir[MAXPATHLEN];
@@ -860,7 +856,7 @@ int push_dir(char *dir)
 		curr_dir_len += len;
 	}
 
-	clean_fname(curr_dir);
+	curr_dir_len = clean_fname(curr_dir, 1);
 
 	return 1;
 }
@@ -881,14 +877,40 @@ int pop_dir(char *dir)
 	return 1;
 }
 
+/* Return the filename, turning any non-printable characters into '?'s.
+ * This ensures that outputting it on a line of its own cannot generate an
+ * empty line.  This function can return only MAX_SAFE_NAMES values at a
+ * time!  The returned value can be longer than MAXPATHLEN (because we
+ * may be trying to output an error about a too-long filename)! */
+char *safe_fname(const char *fname)
+{
+#define MAX_SAFE_NAMES 4
+	static char fbuf[MAX_SAFE_NAMES][MAXPATHLEN*2];
+	static int ndx = 0;
+	int limit = sizeof fbuf / MAX_SAFE_NAMES - 1;
+	char *t;
+
+	ndx = (ndx + 1) % MAX_SAFE_NAMES;
+	for (t = fbuf[ndx]; *fname; fname++) {
+		if (!isprint(*(uchar*)fname))
+			*t++ = '?';
+		else
+			*t++ = *fname;
+		if (--limit == 0)
+			break;
+	}
+	*t = '\0';
+
+	return fbuf[ndx];
+}
+
 /**
  * Return a quoted string with the full pathname of the indicated filename.
  * The string " (in MODNAME)" may also be appended.  The returned pointer
  * remains valid until the next time full_fname() is called.
  **/
-char *full_fname(char *fn)
+char *full_fname(const char *fn)
 {
-	extern int module_id;
 	static char *result = NULL;
 	char *m1, *m2, *m3;
 	char *p1, *p2;
@@ -896,29 +918,26 @@ char *full_fname(char *fn)
 	if (result)
 		free(result);
 
+	fn = safe_fname(fn);
 	if (*fn == '/')
 		p1 = p2 = "";
 	else {
 		p1 = curr_dir;
-		p2 = "/";
+		for (p2 = p1; *p2 == '/'; p2++) {}
+		if (*p2)
+			p2 = "/";
 	}
 	if (module_id >= 0) {
 		m1 = " (in ";
 		m2 = lp_name(module_id);
 		m3 = ")";
-		if (*p1) {
+		if (p1 == curr_dir) {
 			if (!lp_use_chroot(module_id)) {
 				char *p = lp_path(module_id);
 				if (*p != '/' || p[1])
 					p1 += strlen(p);
 			}
-			if (!*p1)
-				p2++;
-			else
-				p1++;
 		}
-		else
-			fn++;
 	} else
 		m1 = m2 = m3 = "";
 
@@ -927,6 +946,73 @@ char *full_fname(char *fn)
 	return result;
 }
 
+static char partial_fname[MAXPATHLEN];
+
+char *partial_dir_fname(const char *fname)
+{
+	char *t = partial_fname;
+	int sz = sizeof partial_fname;
+	const char *fn;
+
+	if ((fn = strrchr(fname, '/')) != NULL) {
+		fn++;
+		if (*partial_dir != '/') {
+			int len = fn - fname;
+			strncpy(t, fname, len); /* safe */
+			t += len;
+			sz -= len;
+		}
+	} else
+		fn = fname;
+	if ((int)pathjoin(t, sz, partial_dir, fn) >= sz)
+		return NULL;
+	if (server_filter_list.head) {
+		static int len;
+		if (!len)
+			len = strlen(partial_dir);
+		t[len] = '\0';
+		if (check_filter(&server_filter_list, partial_fname, 1) < 0)
+			return NULL;
+		t[len] = '/';
+		if (check_filter(&server_filter_list, partial_fname, 0) < 0)
+			return NULL;
+	}
+
+	return partial_fname;
+}
+
+/* If no --partial-dir option was specified, we don't need to do anything
+ * (the partial-dir is essentially '.'), so just return success. */
+int handle_partial_dir(const char *fname, int create)
+{
+	char *fn, *dir;
+
+	if (fname != partial_fname)
+		return 1;
+	if (!create && *partial_dir == '/')
+		return 1;
+	if (!(fn = strrchr(partial_fname, '/')))
+		return 1;
+
+	*fn = '\0';
+	dir = partial_fname;
+	if (create) {
+		STRUCT_STAT st;
+		int statret = do_lstat(dir, &st);
+		if (statret == 0 && !S_ISDIR(st.st_mode)) {
+			if (do_unlink(dir) < 0)
+				return 0;
+			statret = -1;
+		}
+		if (statret < 0 && do_mkdir(dir, 0700) < 0)
+			return 0;
+	} else
+		do_rmdir(dir);
+	*fn = '/';
+
+	return 1;
+}
+
 /** We need to supply our own strcmp function for file list comparisons
    to ensure that signed/unsigned usage is consistent between machines. */
 int u_strcmp(const char *cs1, const char *cs2)
@@ -973,7 +1059,8 @@ int unsafe_symlink(const char *dest, const char *src)
 	int depth = 0;
 
 	/* all absolute and null symlinks are unsafe */
-	if (!dest || !*dest || *dest == '/') return 1;
+	if (!dest || !*dest || *dest == '/')
+		return 1;
 
 	/* find out what our safety margin is */
 	for (name = src; (slash = strchr(name, '/')) != 0; name = slash+1) {
@@ -1041,7 +1128,6 @@ int msleep(int t)
 	struct timeval tval, t1, t2;
 
 	gettimeofday(&t1, NULL);
-	gettimeofday(&t2, NULL);
 
 	while (tdiff < t) {
 		tval.tv_sec = (t-tdiff)/1000;
@@ -1072,13 +1158,13 @@ int msleep(int t)
  **/
 int cmp_modtime(time_t file1, time_t file2)
 {
-	extern int modify_window;
-
 	if (file2 > file1) {
-		if (file2 - file1 <= modify_window) return 0;
+		if (file2 - file1 <= modify_window)
+			return 0;
 		return -1;
 	}
-	if (file1 - file2 <= modify_window) return 0;
+	if (file1 - file2 <= modify_window)
+		return 0;
 	return 1;
 }
 
@@ -1135,3 +1221,110 @@ void *_realloc_array(void *ptr, unsigned int size, unsigned long num)
 		return malloc(size * num);
 	return realloc(ptr, size * num);
 }
+
+/* Take a filename and filename length and return the most significant
+ * filename suffix we can find.  This ignores suffixes such as "~",
+ * ".bak", ".orig", ".~1~", etc. */
+const char *find_filename_suffix(const char *fn, int fn_len, int *len_ptr)
+{
+	const char *suf, *s;
+	BOOL had_tilde;
+	int s_len;
+
+	/* One or more dots at the start aren't a suffix. */
+	while (fn_len && *fn == '.') fn++, fn_len--;
+
+	/* Ignore the ~ in a "foo~" filename. */
+	if (fn_len > 1 && fn[fn_len-1] == '~')
+		fn_len--, had_tilde = True;
+	else
+		had_tilde = False;
+
+	/* Assume we don't find an suffix. */
+	suf = "";
+	*len_ptr = 0;
+
+	/* Find the last significant suffix. */
+	for (s = fn + fn_len; fn_len > 1; ) {
+		while (*--s != '.' && s != fn) {}
+		if (s == fn)
+			break;
+		s_len = fn_len - (s - fn);
+		fn_len = s - fn;
+		if (s_len == 4) {
+			if (strcmp(s+1, "bak") == 0
+			 || strcmp(s+1, "old") == 0)
+				continue;
+		} else if (s_len == 5) {
+			if (strcmp(s+1, "orig") == 0)
+				continue;
+		} else if (s_len > 2 && had_tilde
+		    && s[1] == '~' && isdigit(*(uchar*)(s+2)))
+			continue;
+		*len_ptr = s_len;
+		suf = s;
+		if (s_len == 1)
+			break;
+		/* Determine if the suffix is all digits. */
+		for (s++, s_len--; s_len > 0; s++, s_len--) {
+			if (!isdigit(*(uchar*)s))
+				return suf;
+		}
+		/* An all-digit suffix may not be that signficant. */
+		s = suf;
+	}
+
+	return suf;
+}
+
+/* This is an implementation of the Levenshtein distance algorithm.  It
+ * was implemented to avoid needing a two-dimensional matrix (to save
+ * memory).  It was also tweaked to try to factor in the ASCII distance
+ * between changed characters as a minor distance quantity.  The normal
+ * Levenshtein units of distance (each signifying a single change between
+ * the two strings) are defined as a "UNIT". */
+
+#define UNIT (1 << 16)
+
+uint32 fuzzy_distance(const char *s1, int len1, const char *s2, int len2)
+{
+	uint32 a[MAXPATHLEN], diag, above, left, diag_inc, above_inc, left_inc;
+	int32 cost;
+	int i1, i2;
+
+	if (!len1 || !len2) {
+		if (!len1) {
+			s1 = s2;
+			len1 = len2;
+		}
+		for (i1 = 0, cost = 0; i1 < len1; i1++)
+			cost += s1[i1];
+		return (int32)len1 * UNIT + cost;
+	}
+
+	for (i2 = 0; i2 < len2; i2++)
+		a[i2] = (i2+1) * UNIT;
+
+	for (i1 = 0; i1 < len1; i1++) {
+		diag = i1 * UNIT;
+		above = (i1+1) * UNIT;
+		for (i2 = 0; i2 < len2; i2++) {
+			left = a[i2];
+			if ((cost = *((uchar*)s1+i1) - *((uchar*)s2+i2)) != 0) {
+				if (cost < 0)
+					cost = UNIT - cost;
+				else
+					cost = UNIT + cost;
+			}
+			diag_inc = diag + cost;
+			left_inc = left + UNIT + *((uchar*)s1+i1);
+			above_inc = above + UNIT + *((uchar*)s2+i2);
+			a[i2] = above = left < above
+			      ? (left_inc < diag_inc ? left_inc : diag_inc)
+			      : (above_inc < diag_inc ? above_inc : diag_inc);
+			diag = left;
+		}
+	}
+
+	return a[len2-1];
+}

zlib/deflate.c

@@ -1110,6 +1110,11 @@ local block_state deflate_stored(s, flush)
 	s->strstart += s->lookahead;
 	s->lookahead = 0;
 
+	if (flush == Z_INSERT_ONLY) {
+	    s->block_start = s->strstart;
+	    continue;
+	}
+
 	/* Emit a stored block if pending_buf will be full: */
  	max_start = s->block_start + max_block_size;
         if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
@@ -1125,6 +1130,11 @@ local block_state deflate_stored(s, flush)
             FLUSH_BLOCK(s, 0);
 	}
     }
+    if (flush == Z_INSERT_ONLY) {
+	s->block_start = s->strstart;
+	return need_more;
+    }
+
     FLUSH_BLOCK(s, flush == Z_FINISH);
     return flush == Z_FINISH ? finish_done : block_done;
 }