Preparing for release of 2.6.6

the indicated command(s), each at the appropriate time.

COPYING

@@ -2,7 +2,7 @@
 		       Version 2, June 1991
 
  Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                          675 Mass Ave, Cambridge, MA 02139, USA
+                       59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
@@ -279,7 +279,7 @@ POSSIBILITY OF SUCH DAMAGES.
 
 		     END OF TERMS AND CONDITIONS
 
-	Appendix: How to Apply These Terms to Your New Programs
+	    How to Apply These Terms to Your New Programs
 
   If you develop a new program, and you want it to be of the greatest
 possible use to the public, the best way to achieve this is to make it
@@ -291,7 +291,7 @@ convey the exclusion of warranty; and each file should have at least
 the "copyright" line and a pointer to where the full notice is found.
 
     <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) 19yy  <name of author>
+    Copyright (C) <year>  <name of author>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -305,14 +305,15 @@ the "copyright" line and a pointer to where the full notice is found.
 
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
 
 Also add information on how to contact you by electronic and paper mail.
 
 If the program is interactive, make it output a short notice like this
 when it starts in an interactive mode:
 
-    Gnomovision version 69, Copyright (C) 19yy name of author
+    Gnomovision version 69, Copyright (C) year name of author
     Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
     This is free software, and you are welcome to redistribute it
     under certain conditions; type `show c' for details.

Makefile.in

@@ -28,9 +28,8 @@ VERSION=@VERSION@
 HEADERS=byteorder.h config.h errcode.h proto.h rsync.h lib/pool_alloc.h
 LIBOBJ=lib/wildmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o \
 	lib/permstring.o lib/pool_alloc.o @LIBOBJS@
-ZLIBOBJ=zlib/deflate.o zlib/infblock.o zlib/infcodes.o zlib/inffast.o \
-	zlib/inflate.o zlib/inftrees.o zlib/infutil.o zlib/trees.o \
-	zlib/zutil.o zlib/adler32.o
+ZLIBOBJ=zlib/deflate.o zlib/inffast.o zlib/inflate.o zlib/inftrees.o \
+	zlib/trees.o zlib/zutil.o zlib/adler32.o zlib/compress.o zlib/crc32.o
 OBJS1=rsync.o generator.o receiver.o cleanup.o sender.o exclude.o util.o \
 	main.o checksum.o match.o syscall.o log.o backup.o
 OBJS2=options.o flist.o io.o compat.o hlink.o token.o uidlist.o socket.o \

NEWS

@@ -1,384 +1,65 @@
-NEWS for rsync 2.6.4 (30 March 2005)
-Protocol: 29 (changed)
-Changes since 2.6.3:
+NEWS for rsync 2.6.6 (28 Jul 2005)
+Protocol: 29 (unchanged)
+Changes since 2.6.5:
 
-  OUTPUT CHANGES:
+  SECURITY FIXES:
 
-    - When rsync deletes a directory and outputs a verbose message about
-      it, it now appends a trailing slash to the name instead of (only
-      sometimes) outputting a preceding "directory " string.
+    - The zlib code was upgraded to version 1.2.3 in order to make it more
+      secure.  While the widely-publicized security problem in zlib 1.2.2 did
+      not affect rsync, another security problem surfaced that affects rsync's
+      zlib 1.1.4.
 
-    - The --stats output will contain file-list time-statistics if both
-      sides are 2.6.4, or if the local side is 2.6.4 and the files are
-      being pushed (since the stats come from the sending side).
-      (Requires protocol 29 for a pull.)
-
-    - The "%o" (operation) log-format escape now has a third value (besides
-      "send" and "recv"):  "del." (with trailing dot to make it 4 chars).
-      This changes the way deletions are logged in the daemon's log file.
-
-    - When the --log-format option is combined with --verbose, rsync now
-      avoids outputting the name of the file twice in most circumstances.
-      As long as the --log-format item does not refer to any post-transfer
-      items (such as %b or %c), the --log-format message is output prior to
-      the transfer, so --verbose is now the equivalent of a --log-format of
-      '%n%L' (which outputs the name and any link info).  If the log output
-      must occur after the transfer to be complete, the only time the name
-      is also output prior to the transfer is when --progress was specified
-      (so that the name will precede the progress stats, and the full
-      --log-format output will come after).
-  
   BUG FIXES:
 
-    - Restore the list-clearing behavior of "!" in a .cvsignore file (2.6.3
-      was only treating it as a special token in an rsync include/exclude
-      file).
+    - The setting of flist->high in clean_flist() was wrong for an empty list.
+      This could cause flist_find() to crash in certain rare circumstances
+      (e.g. if just the right directory setup was around when --fuzzy was
+      combined with --link-dest).
 
-    - The combination of --verbose and --dry-run now mentions the full list
-      of changes that would be output without --dry-run.
+    - The outputting of hard-linked files when verbosity was > 1 was not right:
+      without -i it would output the name of each hard-linked file as though
+      it had been changed (it now outputs a "is hard linked" message for the
+      file); with -i it would output all dots for the unchanged attributes of
+      a hard-link (it now changes those dots to spaces, as is done for other
+      totally unchanged items).
 
-    - Avoid a mkdir warning when removing a directory in the destination
-      that already exists in the --backup-dir.
+    - When backing up a changed symlink or device, get rid of any old backup
+      item so that we don't get an "already exists" error.
 
-    - An OS that has a binary mode for its files (such as cygwin) needed
-      setmode(fd, O_BINARY) called on the temp-file we opened with
-      mkstemp().  (Fix derived from the cygwin's 2.6.3 rsync package.)
+    - A couple places that were comparing a local and a remote modification-
+      time were not honoring the --modify-window option.
 
-    - Fixed a potential hang when verbosity is high, the client side is
-      the sender, and the file-list is large.
+    - Fixed a bug where the 'p' (permissions) itemized-changes flag might get
+      set too often (if some non-significant mode bits differed).
 
-    - Fixed a potential protocol-corrupting bug where the generator could
-      merge a message from the receiver into the middle of a multiplexed
-      packet of data if only part of that data had been written out to the
-      socket when the message from the generator arrived.
-
-    - We now check if the OS doesn't support using mknod() for creating
-      FIFOs and sockets, and compile-in some compatibility code using
-      mkfifo() and socket() when necessary.
-
-    - Fixed an off-by-one error in the handling of --max-delete=N.  Also,
-      if the --max-delete limit is exceeded during a run, we now output a
-      warning about this at the end of the run and exit with a new error
-      code (25).
-
-    - One place in the code wasn't checking if fork() failed.
-
-    - The "ignore nonreadable" daemon parameter used to erroneously affect
-      readable symlinks that pointed to a non-existent file.
-
-    - If the OS does not have lchown() and a chown() of a symlink will
-      affect the referent of a symlink (as it should), we no longer try
-      to set the user and group of a symlink.
-
-    - The generator now properly runs the hard-link loop and the dir-time
-      rewriting loop after we're sure that the redo phase is complete.
-
-    - When --backup was specified with --partial-dir=DIR, where DIR is a
-      relative path, the backup code was erroneously trying to backup a
-      file that was put into the partial-dir.
-
-    - If a file gets resent in a single transfer and the --backup option is
-      enabled along with --inplace, rsync no longer performs a duplicate
-      backup (it used to overwrite the first backup with the failed file).
-
-    - One call to flush_write_file() was not being checked for an error.
-
-    - The --no-relative option was not being sent from the client to a
-      server sender.
-
-    - If an rsync daemon specified "dont compress = ..." for a file and the
-      client tried to specify --compress, the libz code was not handling a
-      compression level of 0 properly.  This could cause a transfer failure
-      if the block-size for a file was large enough (e.g. rsync might have
-      exited with an error for large files).
-
-    - Fixed a bug that would sometimes surface when using --compress and
-      sending a file with a block-size larger than 64K (either manually
-      specified, or computed due to the file being really large).  Prior
-      versions of rsync would sometimes fail to decompress the data
-      properly, and thus the transferred file would fail its verification.
-
-    - If a daemon can't open the specified log file (i.e. syslog is not
-      being used), die without crashing.  We also output an error about
-      the failure on stderr (which will only be seen if --no-detach was
-      specified) and exit with a new error code (6).
-
-    - A local transfer no longer duplicates all its include/exclude options
-      (since the forked process already has a copy of the exclude list,
-      there's no need to send them a set of duplicates).
-
-    - When --progress is specified, the output of items that the generator
-      is creating (e.g. dirs, symlinks) is now integrated into the progress
-      output without overlapping it.  (Requires protocol 29.)
-
-    - When --timeout is specified, lulls that occur in the transfer while
-      the generator is doing work that does not generate socket traffic
-      (looking for changed files, deleting files, doing directory-time
-      touch-ups, etc.) will cause a new keep-alive packet to be sent that
-      should keep the transfer going as long as the generator continues to
-      make progress.  (Requires protocol 29.)
-
-    - The stat size of a device is not added to the total file size of the
-      items in the transfer (the size might be undefined on some OSes).
-
-    - Fixed a problem with refused-option messages sometimes not making it
-      back to the client side when a remote --files-from was in effect and
-      the daemon was the receiver.
-
-    - The --compare-dest option was not updating a file that differred in
-      (the preserved) attributes from the version in the compare-dest DIR.
-
-    - When rsync is copying files into a write-protected directory, fixed
-      the change-report output for the directory so that we don't report
-      an identical directory as changed.
+    - Fixed a really old, minor bug that could cause rsync to warn about being
+      unable to mkdir() a path that ends in "/." because it just created the
+      directory (required --relative, --no-implied-dirs, a source path that
+      ended in either a trailing slash or a trailing "/.", and a non-existing
+      destination dir to tickle the bug in a recent version).
 
   ENHANCEMENTS:
 
-    - Rsync now supports popt's option aliases, which means that you can
-      use /etc/popt and/or ~/.popt to create your own option aliases.
+    - Made the "max verbosity" setting in the rsyncd.conf file settable on a
+      per-module basis (which now matches the documentation).
 
-    - Added the --delete-during (--del) option which will delete files
-      from the receiving side incrementally as each directory in the
-      transfer is being processed.  This makes it more efficient than the
-      default, before-the-transfer behavior, which is now also available as
-      --delete-before (and is still the default --delete-WHEN option that
-      will be chosen if --delete or --delete-excluded is specified without
-      a --delete-WHEN choice).  All the --del* options infer --delete, so
-      an rsync daemon that refuses "delete" will still refuse to allow any
-      file-deleting options (including the new --remove-sent-files option).
+    - The support/rrsync script has been upgraded to verify the args of options
+      that take args (instead of rejecting any such options).  The script was
+      also changed to try to be more secure and to fix a problem in the parsing
+      of a pull operation that has multiple sources.
 
-    - All the --delete-WHEN options are now more memory efficient:
-      Previously an duplicate set of file-list objects was created on the
-      receiving side for the entire destination hierarchy.  The new
-      algorithm only creates one directory of objects at a time (for files
-      inside the transfer).
+    - Improved the documentation that explains the difference between a
+      normal daemon transfer and a daemon-over remote-shell transfer.
 
-    - Added the --copy-dest option, which works like --link-dest except
-      that it locally copies identical files instead of hard-linking them.
-
-    - Added support for specifying multiple --compare-dest, --copy-dest, or
-      --link-dest options, but only of a single type. (Promoted from the
-      patches dir and enhanced.) (Requires protocol 29.)
-
-    - Added the --max-size option. (Promoted from the patches dir.)
-
-    - The daemon-mode options are now separated from the normal rsync
-      options so that they can't be mixed together.  This makes it
-      impossible to start a daemon that has improper default option values
-      (which could cause problems when a client connects, such as hanging
-      or crashing).
-
-    - The --bwlimit option may now be used in combination with --daemon
-      to specify both a default value for the daemon side and a value
-      that cannot be exceeded by a user-specified --bwlimit option.
-
-    - Added the "port" parameter to the rsyncd.conf file. (Promoted from
-      the patches dir.)  Also added "address".  The command-line options
-      take precedence over a config-file option, as expected.
-
-    - In _exit_cleanup(): when we are exiting with a partially-received
-      file, we now flush any data in the write-cache before closing the
-      partial file.
-
-    - The --inplace support was enhanced to work with --compare-dest,
-      --link-dest, and (the new) --copy-dest options. (Requires protocol
-      29.)
-
-    - Added the --dirs (-d) option for an easier way to copy directories
-      without recursion.
-
-    - Added the --list-only option, which is mainly a way for the client to
-      put the server into listing mode without needing to resort to any
-      internal option kluges (e.g. the age-old use of "-r --exclude="/*/*"
-      for a non-recursive listing).  This option is used automatically
-      (behind the scenes) when a modern rsync speaks to a modern daemon,
-      but may also be specified manually if you want to force the use of
-      the --list-only option over a remote-shell connection.
-
-    - Added the --omit-dir-times (-O) option, which will avoid updating
-      the modified time for directories when --times was specified.  This
-      option will avoid an extra pass through the file-list at the end of
-      the transfer (to tweak all the directory times), which may provide
-      an appreciable speedup for a really large transfer. (Promoted from
-      the patches dir.)
-
-    - Added the --filter (-f) option and its helper option, -F.  Filter
-      rules are an extension to the existing include/exclude handling
-      that also supports nested filter files as well as per-directory
-      filter files (like .cvsignore, but with full filter-rule parsing).
-      This new option was chosen in order to ensure that all existing
-      include/exclude processing remained 100% compatible with older
-      versions.  Protocol 29 is needed for full filter-rule support, but
-      backward-compatible rules work with earlier protocol versions.
-      (Promoted from the patches dir and enhanced.)
-
-    - Added the --delay-updates option that puts all updated files into
-      a temporary directory (by default ".~tmp~", but settable via the
-      --partial-dir=DIR option) until the end of the transfer.  This
-      makes the updates a little more atomic for a large transfer.
-
-    - If rsync is put into the background, any output from --progress is
-      reduced.
-
-    - Documented the "max verbosity" setting for rsyncd.conf.  (This
-      setting was added a couple releases ago, but left undocumented.)
-
-    - The sender and the generator now double-check the file-list index
-      they are given, and refuse to try to do a file transfer on a
-      non-file index (since that would indicate that something had gone
-      very wrong).
-
-    - Added the --itemize-changes (-i) option, which is a way to output a
-      more detailed list of what files changed and in what way.  The effect
-      is the same as specifying a --log-format of "%i %n%L" (see both the
-      rsync and rsyncd.conf manpages).  Works with --dry-run too.
-
-    - Added the --fuzzy (-y) option, which attempts to find a basis file
-      for a file that is being created from scratch.  The current algorithm
-      only looks in the destination directory for the created file, but it
-      does attempt to find a match based on size/mod-time (in case the file
-      was renamed with no other changes) as well as based on a fuzzy
-      name-matching algorithm.  This option requires protocol 29 because it
-      needs the new file-sorting order.  (Promoted from patches dir and
-      enhanced.) (Requires protocol 29.)
-
-    - Added the --remove-sent-files option, which lets you move files
-      between systems.
-
-    - The hostname in HOST:PATH or HOST::PATH may now be an IPv6 literal
-      enclosed in '[' and ']' (e.g. "[::1]").  (We already allowed IPv6
-      literals in the rsync://HOST:PORT/PATH format.)
-
-    - When rsync recurses to build the file list, it no longer keeps open
-      one or more directory handles from the dir's parent dirs.
-
-    - When building under windows, the default for --daemon is now to
-      avoid detaching, requiring the new --detach option to force rsync
-      to detach.
-
-    - The --dry-run option can now be combined with either --write-batch or
-      --read-batch, allowing you to run a do-nothing test command to see
-      what would happen without --dry-run.
-
-    - The daemon's "read only" config item now sets an internal read_only
-      variable that makes extra sure that no write/delete calls on the
-      read-only side can succeed.
-
-    - The log-format % escapes can now have a numeric field width in
-      between the % and the escape letter (e.g. "%-40n %08p").
-
-    - Improved the option descriptions in the --help text.
-
-  SUPPORT FILES:
-
-    - Added atomic-rsync to the support dir: a perl script that will
-      transfer some files using rsync, and then move the updated files into
-      place all at once at the end of the transfer.  Only works when
-      pulling, and uses --link-dest and a parallel hierarchy of files to
-      effect its update.
-
-    - Added mnt-excl to the support dir: a perl script that takes the
-      /proc/mounts file and translates it into a set of excludes that will
-      exclude all mount points (even mapped mounts to the same disk).  The
-      excludes are made relative to the specified source dir and properly
-      anchored.
-
-    - Added savetransfer.c to the support dir: a C program that can make
-      a copy of all the data that flows over the wire.  This lets you test
-      for data corruption (by saving the data on both the sending side and
-      the receiving side) and provides one way to debug a protocol error.
-
-    - Added rrsync to the support dir: this is an updated version of Joe
-      Smith's restricted rsync perl script.  This helps to ensure that only
-      certain rsync commands can be run by an ssh invocation.
-
-  INTERNAL:
-
-    - Added better checking of the checksum-header values that come over
-      the socket.
-
-    - Merged a variety of file-deleting functions into a single function so
-      that it is easier to maintain.
-
-    - Improved the type of some variables (particularly blocksize vars) for
-      consistency and proper size.
-
-    - Got rid of the uint64 type (which we didn't need).
-
-    - Use a slightly more compatible set of core #include directives.
-
-    - Defined int32 in a way that ensures that the build dies if we can't
-      find a variable with at least 32 bits.
-
-  PROTOCOL DIFFERENCES FOR VERSION 29:
-
-    - A 16-bit flag-word is transmitted after every file-list index.  This
-      indicates what is changing between the sender and the receiver.  The
-      generator now transmits an index and a flag-word to indicate when
-      dirs and symlinks have changed (instead of producing a message),
-      which makes the outputting of the information more consistent and
-      less prone to screen corruption (because the local receiver/sender is
-      now outputting all the file-change info messages).
-
-    - If a file is being hard-linked, the ITEM_XNAME_FOLLOWS bit is enabled
-      in the flag-word and the name of the file that was linked immediately
-      follows in vstring format (see below).
-
-    - If a file is being transferred with an alternate-basis file, the
-      ITEM_BASIS_TYPE_FOLLOWS bit is enabled in the flag-word and a single
-      byte follows, indicating what type of basis file was chosen.  If that
-      indicates that a fuzzy-match was selected, the ITEM_XNAME_FOLLOWS bit
-      is set in the flag-word and the name of the match in vstring format
-      follows the basis byte.  A vstring is a variable length string that
-      has its size written prior to the string, and no terminating null.
-      If the string is from 1-127 bytes, the length is a single byte.  If
-      it is from 128-32767 bytes, the length is written as ((len >> 8) |
-      0x80) followed by (len % 0x100).
-
-    - The sending of exclude names is done using filter-rule syntax.  This
-      means that all names have a prefixed rule indicator, even excludes
-      (which used to be sent as a bare pattern, when possible).  The -C
-      option will include the per-dir .cvsignore merge file in the list of
-      filter rules so it is positioned correctly (unlike in some older
-      transfer scenarios).
-
-    - Rsync sorts the filename list in a different way: it sorts the subdir
-      names after the non-subdir names for each dir's contents, and it
-      always puts a dir's contents immediately after the dir's name in the
-      list.  (Previously an item named "foo.txt" would sort in between
-      directory "foo/" and "foo/bar".)
-
-    - When talking to a protocol 29 rsync daemon, a list-only request
-      is able to note this before the options are sent over the wire and
-      the new --list-only option is included in the options.
-
-    - When the --stats bytes are sent over the wire (or stored in a batch),
-      they now include two elapsed-time values: one for how long it took to
-      build the file-list, and one for how long it took to send it over the
-      wire (each expressed in thousandths of a second).
-
-    - When --delete-excluded is specified with some filter rules (AKA
-      excludes), a client sender will now initiate a send of the rules to
-      the receiver (older protocols used to omit the sending of excludes in
-      this situation since there were no receiver-specific rules that
-      survived --delete-excluded back then).  Note that, as with all the
-      filter-list sending, only items that are significant to the other
-      side will actually be sent over the wire, so the filter-rule list
-      that is sent in this scenario is often empty.
-
-    - An index equal to the file-list count is sent as a keep-alive packet
-      from the generator to the sender, which then forwards it on to the
-      receiver.  This normally invalid index is only a valid keep-alive
-      packet if the 16-bit flag-word that follows it contains a single bit
-      (ITEM_IS_NEW, which is normally an illegal flag to appear alone).
-
-    - A protocol-29 batch file includes a bit for the setting of the --dirs
-      option and for the setting of the --compress option.  Also, the shell
-      script created by --write-batch will use the --filter option instead
-      of --exclude-from to capture any filter rules.
+    - Some of the diffs supplied in the patches dir were fixed and/or
+      improved.
 
   BUILD CHANGES:
 
-    - Handle an operating system that use mkdev() in place of makedev().
+    - Made configure define NOBODY_USER (currently hard-wired to "nobody") and
+      NOBODY_GROUP (set to either "nobody" or "nogroup" depending on what we
+      find in the /etc/group file).
+
+    - Added a test to the test suite, itemized.test, that tests the output of
+      -i (log-format w/%i) and some double-verbose messages.
 
-    - Improved configure to better handle cross-compiling.

OLDNEWS

@@ -1,3 +1,579 @@
+NEWS for rsync 2.6.5 (1 Jun 2005)
+Protocol: 29 (unchanged)
+Changes since 2.6.4:
+
+  OUTPUT CHANGES:
+
+    - Non-printable chars in filenames are now output using backslash-
+      escaped characters rather than '?'s.  Any non-printable character is
+      output using 3 digits of octal (e.g. "\n" -> "\012"), and a backslash
+      is now output as "\\".  Rsync also uses your locale setting, which
+      can make it treat fewer high-bit characters as non-printable.
+
+    - If rsync received an empty file-list when pulling files, it would
+      output a "nothing to do" message and exit with a 0 (success) exit
+      status, even if the remote rsync returned an error (it did not do
+      this under the same conditions when pushing files).  This was changed
+      to make the pulling behavior the same as the pushing behavior:  we
+      now do the normal end-of-run outputting (depending on options) and
+      exit with the appropriate exit status.
+
+  BUG FIXES:
+
+    - A crash bug was fixed when a daemon had its "path" set to "/", did
+      not have chroot enabled, and used some anchored excludes in the
+      rsyncd.conf file.
+
+    - Fixed a bug in the transfer of a single file when -H is specified
+      (rsync would either infinite loop or perhaps crash).
+
+    - Fixed a case where the generator might try (and fail) to tweak the
+      write-permissions of a read-only directory in list-only mode (this
+      only caused an annoying warning message).
+
+    - If --compare-dest or --link-dest uses a locally-copied file as the
+      basis for an updated version, log this better when --verbose or -i
+      is in effect.
+
+    - Fixed the accidental disabling of --backup during the --delete-after
+      processing.
+
+    - Restored the ability to use the --address option in client mode (in
+      addition to its use in daemon mode).
+
+    - Make sure that some temporary progress information from the delete
+      processing does not get left on the screen when it is followed by a
+      newline.
+
+    - When --existing skips a directory with extra verbosity, refer to it
+      as a "directory", not a "file".
+
+    - When transferring a single file to a different-named file, any
+      generator messages that are source-file related no longer refer to
+      the file by the destination filename.
+
+    - Fixed a bug where hard-linking a group of files might fail if the
+      generator hasn't created a needed destination directory yet.
+
+    - Fixed a bug where a hard-linked group of files that is newly-linked
+      to a file in a --link-dest dir doesn't link the files from the rest
+      of the cluster.
+
+    - When deleting files with the --one-file-system (-x) option set, rsync
+      no longer tries to remove files from inside a mount-point on the
+      receiving side.  Also, we don't complain about being unable to remove
+      the mount-point dir.
+
+    - Fixed a compatibility problem when using --cvs-ignore (-C) and
+      sending files to an older rsync without using --delete.
+
+    - Make sure that a "- !" or "+ !" include/exclude pattern does not
+      trigger the list-clearing action that is reserved for "!".
+
+    - Avoid a timeout in the generator when the sender/receiver aren't
+      handling the generator's checksum output quickly enough.
+
+    - Fixed the omission of some directories in the delete processing when
+      --relative (-R) was combined with a source path that had a trailing
+      slash.
+
+    - Fixed a case where rsync would erroneously delete some files and then
+      re-transfer them when the options --relative (-R) and --recursive
+      (-r) were both enabled (along with --delete) and a source path had a
+      trailing slash.
+
+    - Make sure that --max-size doesn't affect a device or a symlink.
+
+    - Make sure that a system with a really small MAXPATHLEN does not cause
+      the buffers in readfd_unbuffered() to be too small to receive normal
+      messages.  (This mainly affected Cygwin.)
+
+    - If a source pathname ends with a filename of "..", treat it as if
+      "../" had been specified (so that we don't copy files to the parent
+      dir of the destination).
+
+    - If --delete is combined with a file-listing rsync command (i.e. no
+      transfer is happening), avoid outputting a warning that we couldn't
+      delete anything.
+
+    - If --stats is specified with --delete-after, ensure that all the
+      "deleting" messages are output before the statistics.
+
+    - Improved one "if" in the deletion code that was only checking errno
+      for ENOTEMPTY when it should have also been checking for EEXIST (for
+      compatibility with OS variations).
+
+  ENHANCEMENTS:
+
+    - Added the --only-write-batch=FILE option that may be used (instead
+      of --write-batch=FILE) to create a batch file without doing any
+      actual updating of the destination.  This allows you to divert all
+      the file-updating data away from a slow data link (as long as you
+      are pushing the data to the remote server when creating the batch).
+
+    - When the generator is taking a long time to fill up its output buffer
+      (e.g. if the transferred files are few, small, or missing), it now
+      periodically flushes the output buffer so that the sender/receiver
+      can get started on the files sooner rather than later.
+
+    - Improved the keep-alive code to handle a long silence between the
+      sender and the receiver that can occur when the sender is receiving
+      the checksum data for a large file.
+
+    - Improved the auth-errors that are logged by the daemon to include
+      some information on why the authorization failed:  wrong user,
+      password mismatch, etc.  (The client-visible message is unchanged!)
+
+    - Improved the client's handling of an "@ERROR" from a daemon so that
+      it does not complain about an unexpectedly closed socket (since we
+      really did expect the socket to close).
+
+    - If the daemon can't open the log-file specified in rsyncd.conf, fall
+      back to using syslog and log an appropriate warning.  This is better
+      than what was typically a totally silent (and fatal) failure (since a
+      daemon is not usually run with the --no-detach option that was
+      necessary to see the error on stderr).
+
+    - The man pages now consistently refer to an rsync daemon as a "daemon"
+      instead of a "server" (to distinguish it from the server process in a
+      non-daemon transfer).
+
+    - Made a small change to the rrsync script (restricted rsync -- in the
+      support dir) to make a read-only server reject all --remove-* options
+      when sending files (to future-proof it against the possibility of
+      other similar options being added at some point).
+
+  INTERNAL:
+
+    - Rsync now calls setlocale(LC_CTYPE, "").  This enables isprint() to
+      better discern which filename characters need to be escaped in
+      messages (which should result in fewer escaped characters in some
+      locales).
+
+    - Improved the naming of the log-file open/reopen/close functions.
+
+    - Removed some protocol-compatibility code that was only needed to help
+      someone running a pre-release of 2.6.4.
+
+  BUILD CHANGES:
+
+    - Added configure option "--disable-locale" to disable any use of
+      setlocale() in the binary.
+
+    - Fixed a bug in the SUPPORT{,_HARD}_LINKS #defines which prevented
+      rsync from being built without symlink or hard-link support.
+
+    - Only #define HAVE_REMSH if it is going to be set to 1.
+
+    - Configure now disables the use of mkstemp() under HP-UX (since they
+      refuse to fix its broken handling of large files).
+
+    - Configure now explicitly checks for the lseek64() function so that
+      the code can use HAVE_LSEEK64 instead of inferring lseek64()'s
+      presence based on the presence of the off64_t type.
+
+    - Configure no longer mentions the change in the default remote-shell
+      (from rsh to ssh) that occurred for the 2.6.0 release.
+
+    - Some minor enhancements to the test scripts.
+
+    - Added a few new *.diff files to the patches dir, including a patch
+      that enables the optional copying of extended attributes.
+
+
+NEWS for rsync 2.6.4 (30 March 2005)
+Protocol: 29 (changed)
+Changes since 2.6.3:
+
+  OUTPUT CHANGES:
+
+    - When rsync deletes a directory and outputs a verbose message about
+      it, it now appends a trailing slash to the name instead of (only
+      sometimes) outputting a preceding "directory " string.
+
+    - The --stats output will contain file-list time-statistics if both
+      sides are 2.6.4, or if the local side is 2.6.4 and the files are
+      being pushed (since the stats come from the sending side).
+      (Requires protocol 29 for a pull.)
+
+    - The "%o" (operation) log-format escape now has a third value (besides
+      "send" and "recv"):  "del." (with trailing dot to make it 4 chars).
+      This changes the way deletions are logged in the daemon's log file.
+
+    - When the --log-format option is combined with --verbose, rsync now
+      avoids outputting the name of the file twice in most circumstances.
+      As long as the --log-format item does not refer to any post-transfer
+      items (such as %b or %c), the --log-format message is output prior to
+      the transfer, so --verbose is now the equivalent of a --log-format of
+      '%n%L' (which outputs the name and any link info).  If the log output
+      must occur after the transfer to be complete, the only time the name
+      is also output prior to the transfer is when --progress was specified
+      (so that the name will precede the progress stats, and the full
+      --log-format output will come after).
+
+    - Non-printable characters in filenames are replaced with a '?' to
+      avoid corrupting the screen or generating empty lines in the output.
+  
+  BUG FIXES:
+
+    - Restore the list-clearing behavior of "!" in a .cvsignore file (2.6.3
+      was only treating it as a special token in an rsync include/exclude
+      file).
+
+    - The combination of --verbose and --dry-run now mentions the full list
+      of changes that would be output without --dry-run.
+
+    - Avoid a mkdir warning when removing a directory in the destination
+      that already exists in the --backup-dir.
+
+    - An OS that has a binary mode for its files (such as cygwin) needed
+      setmode(fd, O_BINARY) called on the temp-file we opened with
+      mkstemp().  (Fix derived from the cygwin's 2.6.3 rsync package.)
+
+    - Fixed a potential hang when verbosity is high, the client side is
+      the sender, and the file-list is large.
+
+    - Fixed a potential protocol-corrupting bug where the generator could
+      merge a message from the receiver into the middle of a multiplexed
+      packet of data if only part of that data had been written out to the
+      socket when the message from the generator arrived.
+
+    - We now check if the OS doesn't support using mknod() for creating
+      FIFOs and sockets, and compile-in some compatibility code using
+      mkfifo() and socket() when necessary.
+
+    - Fixed an off-by-one error in the handling of --max-delete=N.  Also,
+      if the --max-delete limit is exceeded during a run, we now output a
+      warning about this at the end of the run and exit with a new error
+      code (25).
+
+    - One place in the code wasn't checking if fork() failed.
+
+    - The "ignore nonreadable" daemon parameter used to erroneously affect
+      readable symlinks that pointed to a non-existent file.
+
+    - If the OS does not have lchown() and a chown() of a symlink will
+      affect the referent of a symlink (as it should), we no longer try
+      to set the user and group of a symlink.
+
+    - The generator now properly runs the hard-link loop and the dir-time
+      rewriting loop after we're sure that the redo phase is complete.
+
+    - When --backup was specified with --partial-dir=DIR, where DIR is a
+      relative path, the backup code was erroneously trying to backup a
+      file that was put into the partial-dir.
+
+    - If a file gets resent in a single transfer and the --backup option is
+      enabled along with --inplace, rsync no longer performs a duplicate
+      backup (it used to overwrite the first backup with the failed file).
+
+    - One call to flush_write_file() was not being checked for an error.
+
+    - The --no-relative option was not being sent from the client to a
+      server sender.
+
+    - If an rsync daemon specified "dont compress = ..." for a file and the
+      client tried to specify --compress, the libz code was not handling a
+      compression level of 0 properly.  This could cause a transfer failure
+      if the block-size for a file was large enough (e.g. rsync might have
+      exited with an error for large files).
+
+    - Fixed a bug that would sometimes surface when using --compress and
+      sending a file with a block-size larger than 64K (either manually
+      specified, or computed due to the file being really large).  Prior
+      versions of rsync would sometimes fail to decompress the data
+      properly, and thus the transferred file would fail its verification.
+
+    - If a daemon can't open the specified log file (i.e. syslog is not
+      being used), die without crashing.  We also output an error about
+      the failure on stderr (which will only be seen if --no-detach was
+      specified) and exit with a new error code (6).
+
+    - A local transfer no longer duplicates all its include/exclude options
+      (since the forked process already has a copy of the exclude list,
+      there's no need to send them a set of duplicates).
+
+    - When --progress is specified, the output of items that the generator
+      is creating (e.g. dirs, symlinks) is now integrated into the progress
+      output without overlapping it.  (Requires protocol 29.)
+
+    - When --timeout is specified, lulls that occur in the transfer while
+      the generator is doing work that does not generate socket traffic
+      (looking for changed files, deleting files, doing directory-time
+      touch-ups, etc.) will cause a new keep-alive packet to be sent that
+      should keep the transfer going as long as the generator continues to
+      make progress.  (Requires protocol 29.)
+
+    - The stat size of a device is not added to the total file size of the
+      items in the transfer (the size might be undefined on some OSes).
+
+    - Fixed a problem with refused-option messages sometimes not making it
+      back to the client side when a remote --files-from was in effect and
+      the daemon was the receiver.
+
+    - The --compare-dest option was not updating a file that differed in
+      (the preserved) attributes from the version in the compare-dest DIR.
+
+    - When rsync is copying files into a write-protected directory, fixed
+      the change-report output for the directory so that we don't report
+      an identical directory as changed.
+
+  ENHANCEMENTS:
+
+    - Rsync now supports popt's option aliases, which means that you can
+      use /etc/popt and/or ~/.popt to create your own option aliases.
+
+    - Added the --delete-during (--del) option which will delete files
+      from the receiving side incrementally as each directory in the
+      transfer is being processed.  This makes it more efficient than the
+      default, before-the-transfer behavior, which is now also available as
+      --delete-before (and is still the default --delete-WHEN option that
+      will be chosen if --delete or --delete-excluded is specified without
+      a --delete-WHEN choice).  All the --del* options infer --delete, so
+      an rsync daemon that refuses "delete" will still refuse to allow any
+      file-deleting options (including the new --remove-sent-files option).
+
+    - All the --delete-WHEN options are now more memory efficient:
+      Previously an duplicate set of file-list objects was created on the
+      receiving side for the entire destination hierarchy.  The new
+      algorithm only creates one directory of objects at a time (for files
+      inside the transfer).
+
+    - Added the --copy-dest option, which works like --link-dest except
+      that it locally copies identical files instead of hard-linking them.
+
+    - Added support for specifying multiple --compare-dest, --copy-dest, or
+      --link-dest options, but only of a single type. (Promoted from the
+      patches dir and enhanced.) (Requires protocol 29.)
+
+    - Added the --max-size option. (Promoted from the patches dir.)
+
+    - The daemon-mode options are now separated from the normal rsync
+      options so that they can't be mixed together.  This makes it
+      impossible to start a daemon that has improper default option values
+      (which could cause problems when a client connects, such as hanging
+      or crashing).
+
+    - The --bwlimit option may now be used in combination with --daemon
+      to specify both a default value for the daemon side and a value
+      that cannot be exceeded by a user-specified --bwlimit option.
+
+    - Added the "port" parameter to the rsyncd.conf file. (Promoted from
+      the patches dir.)  Also added "address".  The command-line options
+      take precedence over a config-file option, as expected.
+
+    - In _exit_cleanup(): when we are exiting with a partially-received
+      file, we now flush any data in the write-cache before closing the
+      partial file.
+
+    - The --inplace support was enhanced to work with --compare-dest,
+      --link-dest, and (the new) --copy-dest options. (Requires protocol
+      29.)
+
+    - Added the --dirs (-d) option for an easier way to copy directories
+      without recursion.  Any directories that are encountered are created
+      on the destination.  Specifying a directory with a trailing slash
+      copies its immediate contents to the destination.
+
+    - The --files-from option now implies --dirs (-d).
+
+    - Added the --list-only option, which is mainly a way for the client to
+      put the server into listing mode without needing to resort to any
+      internal option kluges (e.g. the age-old use of "-r --exclude="/*/*"
+      for a non-recursive listing).  This option is used automatically
+      (behind the scenes) when a modern rsync speaks to a modern daemon,
+      but may also be specified manually if you want to force the use of
+      the --list-only option over a remote-shell connection.
+
+    - Added the --omit-dir-times (-O) option, which will avoid updating
+      the modified time for directories when --times was specified.  This
+      option will avoid an extra pass through the file-list at the end of
+      the transfer (to tweak all the directory times), which may provide
+      an appreciable speedup for a really large transfer. (Promoted from
+      the patches dir.)
+
+    - Added the --filter (-f) option and its helper option, -F.  Filter
+      rules are an extension to the existing include/exclude handling
+      that also supports nested filter files as well as per-directory
+      filter files (like .cvsignore, but with full filter-rule parsing).
+      This new option was chosen in order to ensure that all existing
+      include/exclude processing remained 100% compatible with older
+      versions.  Protocol 29 is needed for full filter-rule support, but
+      backward-compatible rules work with earlier protocol versions.
+      (Promoted from the patches dir and enhanced.)
+
+    - Added the --delay-updates option that puts all updated files into
+      a temporary directory (by default ".~tmp~", but settable via the
+      --partial-dir=DIR option) until the end of the transfer.  This
+      makes the updates a little more atomic for a large transfer.
+
+    - If rsync is put into the background, any output from --progress is
+      reduced.
+
+    - Documented the "max verbosity" setting for rsyncd.conf.  (This
+      setting was added a couple releases ago, but left undocumented.)
+
+    - The sender and the generator now double-check the file-list index
+      they are given, and refuse to try to do a file transfer on a
+      non-file index (since that would indicate that something had gone
+      very wrong).
+
+    - Added the --itemize-changes (-i) option, which is a way to output a
+      more detailed list of what files changed and in what way.  The effect
+      is the same as specifying a --log-format of "%i %n%L" (see both the
+      rsync and rsyncd.conf manpages).  Works with --dry-run too.
+
+    - Added the --fuzzy (-y) option, which attempts to find a basis file
+      for a file that is being created from scratch.  The current algorithm
+      only looks in the destination directory for the created file, but it
+      does attempt to find a match based on size/mod-time (in case the file
+      was renamed with no other changes) as well as based on a fuzzy
+      name-matching algorithm.  This option requires protocol 29 because it
+      needs the new file-sorting order.  (Promoted from patches dir and
+      enhanced.) (Requires protocol 29.)
+
+    - Added the --remove-sent-files option, which lets you move files
+      between systems.
+
+    - The hostname in HOST:PATH or HOST::PATH may now be an IPv6 literal
+      enclosed in '[' and ']' (e.g. "[::1]").  (We already allowed IPv6
+      literals in the rsync://HOST:PORT/PATH format.)
+
+    - When rsync recurses to build the file list, it no longer keeps open
+      one or more directory handles from the dir's parent dirs.
+
+    - When building under windows, the default for --daemon is now to
+      avoid detaching, requiring the new --detach option to force rsync
+      to detach.
+
+    - The --dry-run option can now be combined with either --write-batch or
+      --read-batch, allowing you to run a do-nothing test command to see
+      what would happen without --dry-run.
+
+    - The daemon's "read only" config item now sets an internal read_only
+      variable that makes extra sure that no write/delete calls on the
+      read-only side can succeed.
+
+    - The log-format % escapes can now have a numeric field width in
+      between the % and the escape letter (e.g. "%-40n %08p").
+
+    - Improved the option descriptions in the --help text.
+
+  SUPPORT FILES:
+
+    - Added atomic-rsync to the support dir: a perl script that will
+      transfer some files using rsync, and then move the updated files into
+      place all at once at the end of the transfer.  Only works when
+      pulling, and uses --link-dest and a parallel hierarchy of files to
+      effect its update.
+
+    - Added mnt-excl to the support dir: a perl script that takes the
+      /proc/mounts file and translates it into a set of excludes that will
+      exclude all mount points (even mapped mounts to the same disk).  The
+      excludes are made relative to the specified source dir and properly
+      anchored.
+
+    - Added savetransfer.c to the support dir: a C program that can make
+      a copy of all the data that flows over the wire.  This lets you test
+      for data corruption (by saving the data on both the sending side and
+      the receiving side) and provides one way to debug a protocol error.
+
+    - Added rrsync to the support dir: this is an updated version of Joe
+      Smith's restricted rsync perl script.  This helps to ensure that only
+      certain rsync commands can be run by an ssh invocation.
+
+  INTERNAL:
+
+    - Added better checking of the checksum-header values that come over
+      the socket.
+
+    - Merged a variety of file-deleting functions into a single function so
+      that it is easier to maintain.
+
+    - Improved the type of some variables (particularly blocksize vars) for
+      consistency and proper size.
+
+    - Got rid of the uint64 type (which we didn't need).
+
+    - Use a slightly more compatible set of core #include directives.
+
+    - Defined int32 in a way that ensures that the build dies if we can't
+      find a variable with at least 32 bits.
+
+  PROTOCOL DIFFERENCES FOR VERSION 29:
+
+    - A 16-bit flag-word is transmitted after every file-list index.  This
+      indicates what is changing between the sender and the receiver.  The
+      generator now transmits an index and a flag-word to indicate when
+      dirs and symlinks have changed (instead of producing a message),
+      which makes the outputting of the information more consistent and
+      less prone to screen corruption (because the local receiver/sender is
+      now outputting all the file-change info messages).
+
+    - If a file is being hard-linked, the ITEM_XNAME_FOLLOWS bit is enabled
+      in the flag-word and the name of the file that was linked immediately
+      follows in vstring format (see below).
+
+    - If a file is being transferred with an alternate-basis file, the
+      ITEM_BASIS_TYPE_FOLLOWS bit is enabled in the flag-word and a single
+      byte follows, indicating what type of basis file was chosen.  If that
+      indicates that a fuzzy-match was selected, the ITEM_XNAME_FOLLOWS bit
+      is set in the flag-word and the name of the match in vstring format
+      follows the basis byte.  A vstring is a variable length string that
+      has its size written prior to the string, and no terminating null.
+      If the string is from 1-127 bytes, the length is a single byte.  If
+      it is from 128-32767 bytes, the length is written as ((len >> 8) |
+      0x80) followed by (len % 0x100).
+
+    - The sending of exclude names is done using filter-rule syntax.  This
+      means that all names have a prefixed rule indicator, even excludes
+      (which used to be sent as a bare pattern, when possible).  The -C
+      option will include the per-dir .cvsignore merge file in the list of
+      filter rules so it is positioned correctly (unlike in some older
+      transfer scenarios).
+
+    - Rsync sorts the filename list in a different way: it sorts the subdir
+      names after the non-subdir names for each dir's contents, and it
+      always puts a dir's contents immediately after the dir's name in the
+      list.  (Previously an item named "foo.txt" would sort in between
+      directory "foo/" and "foo/bar".)
+
+    - When talking to a protocol 29 rsync daemon, a list-only request
+      is able to note this before the options are sent over the wire and
+      the new --list-only option is included in the options.
+
+    - When the --stats bytes are sent over the wire (or stored in a batch),
+      they now include two elapsed-time values: one for how long it took to
+      build the file-list, and one for how long it took to send it over the
+      wire (each expressed in thousandths of a second).
+
+    - When --delete-excluded is specified with some filter rules (AKA
+      excludes), a client sender will now initiate a send of the rules to
+      the receiver (older protocols used to omit the sending of excludes in
+      this situation since there were no receiver-specific rules that
+      survived --delete-excluded back then).  Note that, as with all the
+      filter-list sending, only items that are significant to the other
+      side will actually be sent over the wire, so the filter-rule list
+      that is sent in this scenario is often empty.
+
+    - An index equal to the file-list count is sent as a keep-alive packet
+      from the generator to the sender, which then forwards it on to the
+      receiver.  This normally invalid index is only a valid keep-alive
+      packet if the 16-bit flag-word that follows it contains a single bit
+      (ITEM_IS_NEW, which is normally an illegal flag to appear alone).
+
+    - A protocol-29 batch file includes a bit for the setting of the --dirs
+      option and for the setting of the --compress option.  Also, the shell
+      script created by --write-batch will use the --filter option instead
+      of --exclude-from to capture any filter rules.
+
+  BUILD CHANGES:
+
+    - Handle an operating system that use mkdev() in place of makedev().
+
+    - Improved configure to better handle cross-compiling.
+
+
 NEWS for rsync 2.6.3 (30 Sep 2004)
 Protocol: 28 (unchanged)
 Changes since 2.6.2:
@@ -1043,6 +1619,7 @@ Changes since 2.4.6:
 
 Partial Protocol History
 	RELEASE DATE	VER.	DATE OF COMMIT*	PROTOCOL
+	01 Jun 2005	2.6.5			29
 	30 Mar 2005	2.6.4	17 Jan 2005	29
 	30 Sep 2004	2.6.3			28
 	30 Apr 2004	2.6.2			28

README

@@ -89,6 +89,9 @@ mailing list archives at
 To send a bug report, follow the instructions on the bug-tracking
 page of the web site.
 
+If you don't have web access, email your bug report to
+rsync@lists.samba.org.
+
 
 CVS TREE
 --------

authenticate.c

@@ -51,10 +51,11 @@ void base64_encode(char *buf, int len, char *out)
 	}
 }
 
-/* create a 16 byte challenge buffer */
+/* Generate a challenge buffer and return it base64-encoded. */
 static void gen_challenge(char *addr, char *challenge)
 {
 	char input[32];
+	char md4_out[MD4_SUM_LENGTH];
 	struct timeval tv;
 
 	memset(input, 0, sizeof input);
@@ -67,7 +68,9 @@ static void gen_challenge(char *addr, char *challenge)
 
 	sum_init(0);
 	sum_update(input, sizeof input);
-	sum_end(challenge);
+	sum_end(md4_out);
+
+	base64_encode(md4_out, MD4_SUM_LENGTH, challenge);
 }
 
 
@@ -195,17 +198,18 @@ static char *getpassf(char *filename)
 	return NULL;
 }
 
-/* generate a 16 byte hash from a password and challenge */
+/* Generate an MD4 hash created from the combination of the password
+ * and the challenge string and return it base64-encoded. */
 static void generate_hash(char *in, char *challenge, char *out)
 {
-	char buf[16];
+	char buf[MD4_SUM_LENGTH];
 
 	sum_init(0);
 	sum_update(in, strlen(in));
 	sum_update(challenge, strlen(challenge));
 	sum_end(buf);
 
-	base64_encode(buf, 16, out);
+	base64_encode(buf, MD4_SUM_LENGTH, out);
 }
 
 /* Possibly negotiate authentication with the client.  Use "leader" to
@@ -214,17 +218,15 @@ static void generate_hash(char *in, char *challenge, char *out)
  * Return NULL if authentication failed.  Return "" if anonymous access.
  * Otherwise return username.
  */
-char *auth_server(int f_in, int f_out, int module, char *addr, char *leader)
+char *auth_server(int f_in, int f_out, int module, char *host, char *addr,
+		  char *leader)
 {
 	char *users = lp_auth_users(module);
-	char challenge[16];
-	char b64_challenge[30];
+	char challenge[MD4_SUM_LENGTH*2];
 	char line[MAXPATHLEN];
-	static char user[100];
-	char secret[100];
-	char pass[30];
-	char pass2[30];
-	char *tok;
+	char secret[512];
+	char pass2[MD4_SUM_LENGTH*2];
+	char *tok, *pass;
 
 	/* if no auth list then allow anyone in! */
 	if (!users || !*users)
@@ -232,52 +234,60 @@ char *auth_server(int f_in, int f_out, int module, char *addr, char *leader)
 
 	gen_challenge(addr, challenge);
 
-	base64_encode(challenge, 16, b64_challenge);
+	io_printf(f_out, "%s%s\n", leader, challenge);
 
-	io_printf(f_out, "%s%s\n", leader, b64_challenge);
-
-	if (!read_line(f_in, line, sizeof line - 1))
+	if (!read_line(f_in, line, sizeof line - 1)
+	 || (pass = strchr(line, ' ')) == NULL) {
+		rprintf(FLOG, "auth failed on module %s from %s (%s): "
+			"invalid challenge response\n",
+			lp_name(module), host, addr);
 		return NULL;
+	}
+	*pass++ = '\0';
 
-	memset(user, 0, sizeof user);
-	memset(pass, 0, sizeof pass);
+	if (!(users = strdup(users)))
+		out_of_memory("auth_server");
 
-	if (sscanf(line,"%99s %29s", user, pass) != 2)
-		return NULL;
-
-	users = strdup(users);
-	if (!users)
-		return NULL;
-
-	for (tok=strtok(users," ,\t"); tok; tok = strtok(NULL," ,\t")) {
-		if (wildmatch(tok, user))
+	for (tok = strtok(users, " ,\t"); tok; tok = strtok(NULL, " ,\t")) {
+		if (wildmatch(tok, line))
 			break;
 	}
 	free(users);
 
-	if (!tok)
-		return NULL;
-
-	memset(secret, 0, sizeof secret);
-	if (!get_secret(module, user, secret, sizeof secret - 1)) {
-		memset(secret, 0, sizeof secret);
+	if (!tok) {
+		rprintf(FLOG, "auth failed on module %s from %s (%s): "
+			"unauthorized user\n",
+			lp_name(module), host, addr);
 		return NULL;
 	}
 
-	generate_hash(secret, b64_challenge, pass2);
+	memset(secret, 0, sizeof secret);
+	if (!get_secret(module, line, secret, sizeof secret - 1)) {
+		memset(secret, 0, sizeof secret);
+		rprintf(FLOG, "auth failed on module %s from %s (%s): "
+			"missing secret for user \"%s\"\n",
+			lp_name(module), host, addr, line);
+		return NULL;
+	}
+
+	generate_hash(secret, challenge, pass2);
 	memset(secret, 0, sizeof secret);
 
-	if (strcmp(pass, pass2) == 0)
-		return user;
+	if (strcmp(pass, pass2) != 0) {
+		rprintf(FLOG, "auth failed on module %s from %s (%s): "
+			"password mismatch\n",
+			lp_name(module), host, addr);
+		return NULL;
+	}
 
-	return NULL;
+	return strdup(line);
 }
 
 
 void auth_client(int fd, char *user, char *challenge)
 {
 	char *pass;
-	char pass2[30];
+	char pass2[MD4_SUM_LENGTH*2];
 
 	if (!user || !*user)
 		user = "nobody";
@@ -302,5 +312,3 @@ void auth_client(int fd, char *user, char *challenge)
 	generate_hash(pass, challenge, pass2);
 	io_printf(fd, "%s %s\n", user, pass2);
 }
-
-

backup.c

@@ -188,18 +188,16 @@ static int keep_backup(char *fname)
 		return 0;
 
 	/* Check to see if this is a device file, or link */
-	if (IS_DEVICE(file->mode)) {
-		if (am_root && preserve_devices) {
-			if (do_mknod(buf, file->mode, file->u.rdev) < 0
-			    && (errno != ENOENT || make_bak_dir(buf) < 0
-			     || do_mknod(buf, file->mode, file->u.rdev) < 0)) {
-				rsyserr(FERROR, errno, "mknod %s failed",
-					full_fname(buf));
-			} else if (verbose > 2) {
-				rprintf(FINFO,
-					"make_backup: DEVICE %s successful.\n",
-					safe_fname(fname));
-			}
+	if (IS_DEVICE(file->mode) && am_root && preserve_devices) {
+		do_unlink(buf);
+		if (do_mknod(buf, file->mode, file->u.rdev) < 0
+		    && (errno != ENOENT || make_bak_dir(buf) < 0
+		     || do_mknod(buf, file->mode, file->u.rdev) < 0)) {
+			rsyserr(FERROR, errno, "mknod %s failed",
+				full_fname(buf));
+		} else if (verbose > 2) {
+			rprintf(FINFO, "make_backup: DEVICE %s successful.\n",
+				safe_fname(fname));
 		}
 		kept = 1;
 		do_unlink(fname);
@@ -230,15 +228,18 @@ static int keep_backup(char *fname)
 					full_fname(buf), file->u.link);
 			}
 			kept = 1;
+		} else {
+			do_unlink(buf);
+			if (do_symlink(file->u.link, buf) < 0
+			    && (errno != ENOENT || make_bak_dir(buf) < 0
+			     || do_symlink(file->u.link, buf) < 0)) {
+				rsyserr(FERROR, errno, "link %s -> \"%s\"",
+					full_fname(buf),
+					safe_fname(file->u.link));
+			}
+			do_unlink(fname);
+			kept = 1;
 		}
-		if (do_symlink(file->u.link, buf) < 0
-		    && (errno != ENOENT || make_bak_dir(buf) < 0
-		     || do_symlink(file->u.link, buf) < 0)) {
-			rsyserr(FERROR, errno, "link %s -> \"%s\"",
-				full_fname(buf), safe_fname(file->u.link));
-		}
-		do_unlink(fname);
-		kept = 1;
 	}
 #endif
 

batch.c

@@ -139,7 +139,7 @@ static void write_filter_rules(int fd)
  * (hopefully) work. */
 void write_batch_shell_file(int argc, char *argv[], int file_arg_cnt)
 {
-	int fd, i;
+	int fd, i, len;
 	char *p, filename[MAXPATHLEN];
 
 	stringjoin(filename, sizeof filename,
@@ -175,11 +175,12 @@ void write_batch_shell_file(int argc, char *argv[], int file_arg_cnt)
 			continue;
 		}
 		write(fd, " ", 1);
-		if (strncmp(p, "--write-batch", 13) == 0) {
+		if (strncmp(p, "--write-batch", len = 13) == 0
+		 || strncmp(p, "--only-write-batch", len = 18) == 0) {
 			write(fd, "--read-batch", 12);
-			if (p[13] == '=') {
+			if (p[len] == '=') {
 				write(fd, "=", 1);
-				write_arg(fd, p + 14);
+				write_arg(fd, p + len + 1);
 			}
 		} else
 			write_arg(fd, p);

clientserver.c

@@ -41,7 +41,6 @@ extern int filesfrom_fd;
 extern int remote_protocol;
 extern int protocol_version;
 extern int io_timeout;
-extern int select_timeout;
 extern int orig_umask;
 extern int no_detach;
 extern int default_af_hint;
@@ -100,7 +99,7 @@ int start_socket_client(char *host, char *path, int argc, char *argv[])
 
 	ret = start_inband_exchange(user, path, fd, fd, argc);
 
-	return ret < 0? ret : client_run(fd, fd, -1, argc, argv);
+	return ret ? ret : client_run(fd, fd, -1, argc, argv);
 }
 
 int start_inband_exchange(char *user, char *path, int f_in, int f_out, 
@@ -196,10 +195,10 @@ int start_inband_exchange(char *user, char *path, int f_in, int f_out,
 			rprintf(FERROR, "%s\n", line);
 			/* This is always fatal; the server will now
 			 * close the socket. */
-			return RERR_STARTCLIENT;
-		} else {
-			rprintf(FINFO,"%s\n", line);
+			return -1;
 		}
+
+		rprintf(FINFO, "%s\n", line);
 	}
 	kluge_around_eof = 0;
 
@@ -228,6 +227,9 @@ static int rsync_module(int f_in, int f_out, int i)
 	uid_t uid = (uid_t)-2;  /* canonically "nobody" */
 	gid_t gid = (gid_t)-2;
 	char *p;
+#ifdef HAVE_PUTENV
+	char *s;
+#endif
 	char *addr = client_addr(f_in);
 	char *host = client_name(f_in);
 	char *name = lp_name(i);
@@ -268,11 +270,9 @@ static int rsync_module(int f_in, int f_out, int i)
 		return -1;
 	}
 
-	auth_user = auth_server(f_in, f_out, i, addr, "@RSYNCD: AUTHREQD ");
+	auth_user = auth_server(f_in, f_out, i, host, addr, "@RSYNCD: AUTHREQD ");
 
 	if (!auth_user) {
-		rprintf(FLOG, "auth failed on module %s from %s (%s)\n",
-			name, host, addr);
 		io_printf(f_out, "@ERROR: auth failed on module %s\n", name);
 		return -1;
 	}
@@ -321,13 +321,11 @@ static int rsync_module(int f_in, int f_out, int i)
 	/* TODO: Perhaps take a list of gids, and make them into the
 	 * supplementary groups. */
 
-	if (use_chroot) {
+	if (use_chroot || (module_dirlen = strlen(lp_path(i))) == 1) {
 		module_dirlen = 0;
 		set_filter_dir("/", 1);
-	} else {
-		module_dirlen = strlen(lp_path(i));
+	} else
 		set_filter_dir(lp_path(i), module_dirlen);
-	}
 
 	p = lp_filter(i);
 	parse_rule(&server_filter_list, p, MATCHFLG_WORD_SPLIT,
@@ -352,6 +350,58 @@ static int rsync_module(int f_in, int f_out, int i)
 
 	log_init();
 
+#ifdef HAVE_PUTENV
+	s = lp_prexfer_exec(i);
+	p = lp_postxfer_exec(i);
+	if ((s && *s) || (p && *p)) {
+		char *modname, *modpath, *hostaddr, *hostname, *username;
+		int status;
+		if (asprintf(&modname, "RSYNC_MODULE_NAME=%s", name) < 0
+		 || asprintf(&modpath, "RSYNC_MODULE_PATH=%s", lp_path(i)) < 0
+		 || asprintf(&hostaddr, "RSYNC_HOST_ADDR=%s", addr) < 0
+		 || asprintf(&hostname, "RSYNC_HOST_NAME=%s", host) < 0
+		 || asprintf(&username, "RSYNC_USER_NAME=%s", auth_user) < 0)
+			out_of_memory("rsync_module");
+		putenv(modname);
+		putenv(modpath);
+		putenv(hostaddr);
+		putenv(hostname);
+		putenv(username);
+		umask(orig_umask);
+		if (s && *s) {
+			status = system(s);
+			if (!WIFEXITED(status) || WEXITSTATUS(status) != 0) {
+				rprintf(FLOG, "prexfer-exec failed\n");
+				io_printf(f_out, "@ERROR: prexfer-exec failed\n");
+				return -1;
+			}
+		}
+		if (p && *p) {
+			pid_t pid = fork();
+			if (pid < 0) {
+				rsyserr(FLOG, errno, "fork failed");
+				io_printf(f_out, "@ERROR: fork failed\n");
+				return -1;
+			}
+			if (pid) {
+				char *ret1, *ret2;
+				waitpid(pid, &status, 0);
+				if (asprintf(&ret1, "RSYNC_RAW_STATUS=%d", status) > 0)
+					putenv(ret1);
+				if (WIFEXITED(status))
+					status = WEXITSTATUS(status);
+				else
+					status = -1;
+				if (asprintf(&ret2, "RSYNC_EXIT_STATUS=%d", status) > 0)
+					putenv(ret2);
+				system(p);
+				_exit(status);
+			}
+		}
+		umask(0);
+	}
+#endif
+
 	if (use_chroot) {
 		/*
 		 * XXX: The 'use chroot' flag is a fairly reliable
@@ -483,8 +533,8 @@ static int rsync_module(int f_in, int f_out, int i)
 
 #ifndef DEBUG
 	/* don't allow the logs to be flooded too fast */
-	if (verbose > lp_max_verbosity())
-		verbose = lp_max_verbosity();
+	if (verbose > lp_max_verbosity(i))
+		verbose = lp_max_verbosity(i);
 #endif
 
 	if (protocol_version < 23
@@ -522,11 +572,8 @@ static int rsync_module(int f_in, int f_out, int i)
 		exit_cleanup(RERR_UNSUPPORTED);
 	}
 
-	if (lp_timeout(i)) {
-		io_timeout = lp_timeout(i);
-		if (io_timeout < select_timeout)
-			select_timeout = io_timeout;
-	}
+	if (lp_timeout(i) && lp_timeout(i) > io_timeout)
+		set_io_timeout(lp_timeout(i));
 
 	start_server(f_in, f_out, argc, argp);
 

configure.in

@@ -5,7 +5,7 @@ AC_CONFIG_SRCDIR([byteorder.h])
 AC_CONFIG_HEADER(config.h)
 AC_PREREQ(2.59)
 
-RSYNC_VERSION=2.6.4
+RSYNC_VERSION=2.6.6
 AC_SUBST(RSYNC_VERSION)
 AC_MSG_NOTICE([Configuring rsync $RSYNC_VERSION])
 
@@ -54,8 +54,6 @@ else
 fi
 
 
-
-
 AC_ARG_ENABLE(profile,
 	AC_HELP_STRING([--enable-profile],
 		[turn on CPU profiling (default no)],
@@ -122,7 +120,9 @@ AC_ARG_WITH(rsh,
 	AC_HELP_STRING([--with-rsh=CMD], [set remote shell command to CMD (default: ssh)]))
 
 AC_CHECK_PROG(HAVE_REMSH, remsh, 1, 0)
-AC_DEFINE_UNQUOTED(HAVE_REMSH, $HAVE_REMSH, [remote shell is remsh not rsh])
+if test x$HAVE_REMSH = x1; then
+	AC_DEFINE(HAVE_REMSH, 1, [Define to 1 if remote shell is remsh, not rsh])
+fi
 
 if test x"$with_rsh" != x
 then
@@ -130,9 +130,20 @@ then
 else
 	RSYNC_RSH="ssh"
 fi
-
 AC_DEFINE_UNQUOTED(RSYNC_RSH, "$RSYNC_RSH", [default -e command])
 
+AC_MSG_CHECKING([the group for user "nobody"])
+if grep '^nobody:' /etc/group >/dev/null 2>&1; then
+    NOBODY_GROUP=nobody
+elif grep '^nogroup:' /etc/group >/dev/null 2>&1; then
+    NOBODY_GROUP=nogroup
+else
+    NOBODY_GROUP=nobody # test for others?
+fi
+AC_MSG_RESULT($NOBODY_GROUP)
+AC_DEFINE_UNQUOTED(NOBODY_USER, "nobody", [unprivileged user--e.g. nobody])
+AC_DEFINE_UNQUOTED(NOBODY_GROUP, "$NOBODY_GROUP", [unprivileged group for unprivileged user])
+
 # arrgh. libc in the current debian stable screws up the largefile
 # stuff, getting byte range locking wrong
 AC_CACHE_CHECK([for broken largefile support],rsync_cv_HAVE_BROKEN_LARGEFILE,[
@@ -181,6 +192,17 @@ ipv6trylibc=yes
 AC_ARG_ENABLE(ipv6,
 	AC_HELP_STRING([--disable-ipv6], [don't even try to use IPv6]))
 
+dnl Do you want to disable use of locale functions
+AH_TEMPLATE([CONFIG_LOCALE],
+[Undefine if you don't want locale features.  By default this is defined.])
+AC_ARG_ENABLE([locale],
+	AC_HELP_STRING([--disable-locale], [turn off locale features]),
+[if test x$enableval = xyes; then
+  AC_DEFINE(CONFIG_LOCALE)
+fi],
+AC_DEFINE(CONFIG_LOCALE)
+)
+
 if test "x$enable_ipv6" != xno
 then
 	AC_MSG_CHECKING([ipv6 stack type])
@@ -287,7 +309,7 @@ AC_HEADER_SYS_WAIT
 AC_CHECK_HEADERS(sys/fcntl.h sys/select.h fcntl.h sys/time.h sys/unistd.h \
     unistd.h utime.h grp.h compat.h sys/param.h ctype.h sys/wait.h \
     sys/ioctl.h sys/filio.h string.h stdlib.h sys/socket.h sys/mode.h \
-    sys/un.h glob.h mcheck.h arpa/inet.h arpa/nameser.h \
+    sys/un.h glob.h mcheck.h arpa/inet.h arpa/nameser.h locale.h \
     netdb.h malloc.h float.h)
 AC_HEADER_MAJOR
 
@@ -478,7 +500,7 @@ AC_CHECK_FUNCS(waitpid wait4 getcwd strdup strerror chown chmod mknod mkfifo \
     fchmod fstat strchr readlink link utime utimes strftime mtrace ftruncate \
     memmove lchown vsnprintf snprintf vasprintf asprintf setsid glob strpbrk \
     strlcat strlcpy strtol mallinfo getgroups setgroups geteuid getegid \
-    setmode open64 mkstemp64 va_copy __va_copy)
+    setlocale setmode open64 lseek64 mkstemp64 va_copy __va_copy)
 
 AC_CHECK_FUNCS(getpgrp tcgetpgrp)
 if test $ac_cv_func_getpgrp = yes; then
@@ -621,7 +643,17 @@ rsync_cv_HAVE_SECURE_MKSTEMP=yes,
 rsync_cv_HAVE_SECURE_MKSTEMP=no,
 rsync_cv_HAVE_SECURE_MKSTEMP=cross)])
 if test x"$rsync_cv_HAVE_SECURE_MKSTEMP" = x"yes"; then
-    AC_DEFINE(HAVE_SECURE_MKSTEMP, 1, [Define to 1 if mkstemp() is available and works right])
+    case $target_os in
+    hpux*)
+	dnl HP-UX has a broken mkstemp() implementation they refuse to fix,
+	dnl so we noisily skip using it.  See HP change request JAGaf34426
+	dnl for details. (sbonds)
+	AC_MSG_WARN(Skipping broken HP-UX mkstemp() -- using mktemp() instead)
+	;;
+    *)
+	AC_DEFINE(HAVE_SECURE_MKSTEMP, 1, [Define to 1 if mkstemp() is available and works right])
+	;;
+    esac
 fi
 
 
@@ -716,21 +748,6 @@ AC_SUBST(BUILD_POPT)
 AC_CONFIG_FILES([Makefile lib/dummy zlib/dummy popt/dummy shconfig])
 AC_OUTPUT
 
-if test x"$with_rsh" = x; then
-	if test x"$HAVE_REMSH" = x1; then
-		rmsh1='remsh:'
-		rmsh2='=remsh'
-	else
-		rmsh1='rsh:  '
-		rmsh2='=rsh  '
-	fi
-	AC_MSG_RESULT()
-	AC_MSG_RESULT([    **********************************************************************])
-	AC_MSG_RESULT([    *   As of v2.6.0, the default remote shell is ssh instead of rsh!!   *])
-	AC_MSG_RESULT([    *   To use previous default of $rmsh1 ./configure --with-rsh$rmsh2   *])
-	AC_MSG_RESULT([    **********************************************************************])
-fi
-
 AC_MSG_RESULT()
 AC_MSG_RESULT([    rsync ${RSYNC_VERSION} configuration successful])
 AC_MSG_RESULT()

errcode.h

@@ -28,7 +28,6 @@
 #define RERR_FILESELECT 3       /* errors selecting input/output files, dirs */
 #define RERR_UNSUPPORTED 4      /* requested action not supported */
 #define RERR_STARTCLIENT 5      /* error starting client-server protocol */
-#define RERR_LOG_FAILURE 6      /* daemon unable to append to log-file */
 
 #define RERR_SOCKETIO   10      /* error in socket IO */
 #define RERR_FILEIO     11      /* error in file IO */

exclude.c

@@ -674,8 +674,7 @@ static const char *parse_rule_tok(const char *p, uint32 mflags, int xflags,
 		} else if (*s == '+' && s[1] == ' ') {
 			new_mflags |= MATCHFLG_INCLUDE;
 			s += 2;
-		}
-		if (*s == '!')
+		} else if (*s == '!')
 			new_mflags |= MATCHFLG_CLEAR_LIST; /* Tentative! */
 	} else {
 		char ch = 0, *mods = "";
@@ -716,7 +715,6 @@ static const char *parse_rule_tok(const char *p, uint32 mflags, int xflags,
 			if ((s = RULE_STRCMP(s, "show")) != NULL)
 				ch = 'S';
 			break;
-
 		default:
 			ch = *s;
 			if (s[1] == ',')
@@ -1107,9 +1105,9 @@ static void send_rules(int f_out, struct filter_list_struct *flp)
 			continue;
 		if (ent->match_flags & MATCHFLG_CVS_IGNORE
 		    && !(ent->match_flags & MATCHFLG_MERGE_FILE)) {
-			int f = am_sender || protocol_version < 29 ? f_out : -1;
+			int f = am_sender || protocol_version < 29 ? f_out : -2;
 			send_rules(f, &cvs_filter_list);
-			if (f >= 0)
+			if (f == f_out)
 				continue;
 		}
 		p = get_rule_prefix(ent->match_flags, ent->pattern, 1, &plen);
@@ -1178,7 +1176,7 @@ void recv_filter_list(int f_in)
 	if (!local_server && (am_sender || receiver_wants_list)) {
 		while ((len = read_int(f_in)) != 0) {
 			if (len >= sizeof line)
-				overflow("recv_rules");
+				overflow_exit("recv_rules");
 			read_sbuf(f_in, line, len);
 			parse_rule(&filter_list, line, 0, xflags);
 		}

flist.c

@@ -546,7 +546,7 @@ static struct file_struct *receive_file_entry(struct file_list *flist,
 		rprintf(FERROR,
 			"overflow: flags=0x%x l1=%d l2=%d lastname=%s\n",
 			flags, l1, l2, safe_fname(lastname));
-		overflow("receive_file_entry");
+		overflow_exit("receive_file_entry");
 	}
 
 	strlcpy(thisname, lastname, l1 + 1);
@@ -611,7 +611,7 @@ static struct file_struct *receive_file_entry(struct file_list *flist,
 		if (linkname_len <= 0 || linkname_len > MAXPATHLEN) {
 			rprintf(FERROR, "overflow: linkname_len=%d\n",
 				linkname_len - 1);
-			overflow("receive_file_entry");
+			overflow_exit("receive_file_entry");
 		}
 	}
 	else
@@ -655,6 +655,9 @@ static struct file_struct *receive_file_entry(struct file_list *flist,
 		if (flags & XMIT_TOP_DIR) {
 			in_del_hier = 1;
 			del_hier_name_len = file->dir.depth == 0 ? 0 : l1 + l2;
+			if (relative_paths && del_hier_name_len > 2
+			    && basename_len == 1+1 && *basename == '.')
+				del_hier_name_len -= 2;
 			file->flags |= FLAG_TOP_DIR | FLAG_DEL_HERE;
 		} else if (in_del_hier) {
 			if (!relative_paths || !del_hier_name_len
@@ -1117,11 +1120,21 @@ struct file_list *send_file_list(int f, int argc, char *argv[])
 			if (l == 2 && fname[0] == '.') {
 				/* Turn "./" into just "." rather than "./." */
 				fname[1] = '\0';
-			} else if (l < MAXPATHLEN) {
+			} else {
+				if (l + 1 >= MAXPATHLEN)
+					overflow_exit("send_file_list");
 				fname[l++] = '.';
 				fname[l] = '\0';
 			}
 			is_dot_dir = 1;
+		} else if (l > 1 && fname[l-1] == '.' && fname[l-2] == '.'
+		    && (l == 2 || fname[l-3] == '/')) {
+			if (l + 2 >= MAXPATHLEN)
+				overflow_exit("send_file_list");
+			fname[l++] = '/';
+			fname[l++] = '.';
+			fname[l] = '\0';
+			is_dot_dir = 1;
 		} else {
 			is_dot_dir = fname[l-1] == '.'
 				   && (l == 1 || fname[l-2] == '/');
@@ -1146,7 +1159,7 @@ struct file_list *send_file_list(int f, int argc, char *argv[])
 		if (!relative_paths) {
 			p = strrchr(fname, '/');
 			if (p) {
-				*p = 0;
+				*p = '\0';
 				if (p == fname)
 					dir = "/";
 				else
@@ -1154,10 +1167,10 @@ struct file_list *send_file_list(int f, int argc, char *argv[])
 				fname = p + 1;
 			}
 		} else if (implied_dirs && (p=strrchr(fname,'/')) && p != fname) {
-			/* this ensures we send the intermediate directories,
-			   thus getting their permissions right */
+			/* Send the implied directories at the start of the
+			 * source spec, so we get their permissions right. */
 			char *lp = lastpath, *fn = fname, *slash = fname;
-			*p = 0;
+			*p = '\0';
 			/* Skip any initial directories in our path that we
 			 * have in common with lastpath. */
 			while (*fn && *lp == *fn) {
@@ -1172,13 +1185,13 @@ struct file_list *send_file_list(int f, int argc, char *argv[])
 				copy_links = copy_unsafe_links;
 				xfer_dirs = 1;
 				while ((slash = strchr(slash+1, '/')) != 0) {
-					*slash = 0;
+					*slash = '\0';
 					send_file_name(f, flist, fname, 0);
 					*slash = '/';
 				}
 				copy_links = save_copy_links;
 				xfer_dirs = save_xfer_dirs;
-				*p = 0;
+				*p = '\0';
 				strlcpy(lastpath, fname, sizeof lastpath);
 				*p = '/';
 			}
@@ -1458,8 +1471,12 @@ static void clean_flist(struct file_list *flist, int strip_root, int no_dups)
 {
 	int i, prev_i = 0;
 
-	if (!flist || flist->count == 0)
+	if (!flist)
 		return;
+	if (flist->count == 0) {
+		flist->high = -1;
+		return;
+	}
 
 	sorting_flist = flist;
 	qsort(flist->files, flist->count,
@@ -1511,8 +1528,8 @@ static void clean_flist(struct file_list *flist, int strip_root, int no_dups)
 			}
 			/* Make sure that if we unduplicate '.', that we don't
 			 * lose track of a user-specified top directory. */
-			if (flist->files[drop]->flags & FLAG_TOP_DIR)
-				flist->files[keep]->flags |= FLAG_TOP_DIR;
+			flist->files[keep]->flags |= flist->files[drop]->flags
+						   & (FLAG_TOP_DIR|FLAG_DEL_HERE);
 
 			clear_file(drop, flist);
 
@@ -1667,8 +1684,13 @@ int f_name_cmp(struct file_struct *f1, struct file_struct *f2)
 				break;
 			case s_SLASH:
 				type1 = S_ISDIR(f1->mode) ? t_path : t_ITEM;
-				state1 = s_BASE;
 				c1 = (uchar*)f1->basename;
+				if (type1 == t_PATH && *c1 == '.' && !c1[1]) {
+					type1 = t_ITEM;
+					state1 = s_TRAILING;
+					c1 = (uchar*)"";
+				} else
+					state1 = s_BASE;
 				break;
 			case s_BASE:
 				state1 = s_TRAILING;
@@ -1692,8 +1714,13 @@ int f_name_cmp(struct file_struct *f1, struct file_struct *f2)
 				break;
 			case s_SLASH:
 				type2 = S_ISDIR(f2->mode) ? t_path : t_ITEM;
-				state2 = s_BASE;
 				c2 = (uchar*)f2->basename;
+				if (type2 == t_PATH && *c2 == '.' && !c2[1]) {
+					type2 = t_ITEM;
+					state2 = s_TRAILING;
+					c2 = (uchar*)"";
+				} else
+					state2 = s_BASE;
 				break;
 			case s_BASE:
 				state2 = s_TRAILING;

generator.c

@@ -25,6 +25,7 @@
 
 extern int verbose;
 extern int dry_run;
+extern int do_xfers;
 extern int log_format_has_i;
 extern int log_format_has_o_or_i;
 extern int daemon_log_format_has_i;
@@ -58,8 +59,8 @@ extern int csum_length;
 extern int ignore_times;
 extern int size_only;
 extern OFF_T max_size;
-extern int io_timeout;
 extern int io_error;
+extern int allowed_lull;
 extern int sock_f_out;
 extern int ignore_timeout;
 extern int protocol_version;
@@ -88,8 +89,6 @@ extern int backup_suffix_len;
 extern struct file_list *the_file_list;
 extern struct filter_list_struct server_filter_list;
 
-int allowed_lull = 0;
-
 static int deletion_count = 0; /* used to implement --max-delete */
 
 
@@ -151,7 +150,7 @@ static int delete_item(char *fname, int mode, int flags)
 		deletion_count--;
 		return 0;
 	}
-	if (!zap_dir || (errno != ENOTEMPTY && errno != EEXIST)) {
+	if (!zap_dir) {
 		rsyserr(FERROR, errno, "delete_file: rmdir %s failed",
 			full_fname(fname));
 		return -1;
@@ -170,10 +169,7 @@ static int delete_item(char *fname, int mode, int flags)
 			continue;
 
 		f_name_to(fp, buf);
-		if (delete_item(buf, fp->mode, flags & ~DEL_TERSE) != 0) {
-			flist_free(dirlist);
-			return -1;
-		}
+		delete_item(buf, fp->mode, flags & ~DEL_TERSE);
 	}
 	flist_free(dirlist);
 
@@ -185,7 +181,7 @@ static int delete_item(char *fname, int mode, int flags)
 	if (do_rmdir(fname) == 0) {
 		if (!(flags & DEL_TERSE))
 			log_delete(fname, mode);
-	} else if (errno != ENOTEMPTY && errno != ENOENT) {
+	} else if (errno != ENOTEMPTY && errno != EEXIST && errno != ENOENT) {
 		rsyserr(FERROR, errno, "delete_file: rmdir %s failed",
 			full_fname(fname));
 		return -1;
@@ -248,21 +244,25 @@ static void delete_in_dir(struct file_list *flist, char *fbuf,
 	if (link_stat(fbuf, &st, keep_dirlinks) < 0)
 		return;
 
-	if (one_file_system && file->flags & FLAG_TOP_DIR)
-		filesystem_dev = st.st_dev;
+	if (one_file_system) {
+		if (file->flags & FLAG_TOP_DIR)
+			filesystem_dev = st.st_dev;
+		else if (filesystem_dev != st.st_dev)
+			return;
+	}
 
 	dirlist = get_dirlist(fbuf, dlen, 0);
 
 	/* If an item in dirlist is not found in flist, delete it
 	 * from the filesystem. */
 	for (i = dirlist->count; i--; ) {
-		if (!dirlist->files[i]->basename)
+		struct file_struct *fp = dirlist->files[i];
+		if (!fp->basename || fp->flags & FLAG_MOUNT_POINT)
 			continue;
-		if (flist_find(flist, dirlist->files[i]) < 0) {
-			int mode = dirlist->files[i]->mode;
-			f_name_to(dirlist->files[i], delbuf);
-			if (delete_item(delbuf, mode, DEL_FORCE_RECURSE) < 0)
-				break;
+		if (flist_find(flist, fp) < 0) {
+			int mode = fp->mode;
+			f_name_to(fp, delbuf);
+			delete_item(delbuf, mode, DEL_FORCE_RECURSE);
 		}
 	}
 
@@ -276,7 +276,8 @@ static void do_delete_pass(struct file_list *flist)
 	char fbuf[MAXPATHLEN];
 	int j;
 
-	if (dry_run > 1) /* destination doesn't exist yet */
+	if (dry_run > 1 /* destination doesn't exist yet */
+	 || list_only)
 		return;
 
 	for (j = 0; j < flist->count; j++) {
@@ -291,6 +292,8 @@ static void do_delete_pass(struct file_list *flist)
 
 		delete_in_dir(flist, fbuf, file);
 	}
+	if (do_progress && !am_server)
+		rprintf(FINFO, "                    \r");
 }
 
 static int unchanged_attrs(struct file_struct *file, STRUCT_STAT *st)
@@ -320,10 +323,12 @@ void itemize(struct file_struct *file, int ndx, int statret, STRUCT_STAT *st,
 			    : S_ISDIR(file->mode) ? !omit_dir_times
 			    : !S_ISLNK(file->mode);
 
-			if ((iflags & (ITEM_TRANSFER|ITEM_LOCAL_CHANGE) && !keep_time)
-			    || (keep_time && file->modtime != st->st_mtime))
+			if ((iflags & (ITEM_TRANSFER|ITEM_LOCAL_CHANGE) && !keep_time
+			     && (!(iflags & ITEM_XNAME_FOLLOWS) || *xname))
+			    || (keep_time && cmp_modtime(file->modtime, st->st_mtime) != 0))
 				iflags |= ITEM_REPORT_TIME;
-			if (preserve_perms && file->mode != st->st_mode)
+			if (preserve_perms
+			 && (file->mode & CHMOD_BITS) != (st->st_mode & CHMOD_BITS))
 				iflags |= ITEM_REPORT_PERMS;
 			if (preserve_uid && am_root && file->uid != st->st_uid)
 				iflags |= ITEM_REPORT_OWNER;
@@ -525,7 +530,7 @@ static int find_fuzzy(struct file_struct *file, struct file_list *dirlist)
 		name = fp->basename;
 
 		if (fp->length == file->length
-		    && fp->modtime == file->modtime) {
+		    && cmp_modtime(fp->modtime, file->modtime) == 0) {
 			if (verbose > 4) {
 				rprintf(FINFO,
 					"fuzzy size/modtime match for %s\n",
@@ -665,7 +670,8 @@ static void recv_generator(char *fname, struct file_struct *file, int ndx,
 	if (only_existing && statret == -1 && stat_errno == ENOENT) {
 		/* we only want to update existing files */
 		if (verbose > 1) {
-			rprintf(FINFO, "not creating new file \"%s\"\n",
+			rprintf(FINFO, "not creating new %s \"%s\"\n",
+				S_ISDIR(file->mode) ? "directory" : "file",
 				safe_fname(fname));
 		}
 		return;
@@ -702,7 +708,7 @@ static void recv_generator(char *fname, struct file_struct *file, int ndx,
 		if (statret != 0 && do_mkdir(fname,file->mode) != 0 && errno != EEXIST) {
 			if (!relative_paths || errno != ENOENT
 			    || create_directory_path(fname, orig_umask) < 0
-			    || do_mkdir(fname, file->mode) < 0) {
+			    || (do_mkdir(fname, file->mode) < 0 && errno != EEXIST)) {
 				rsyserr(FERROR, errno,
 					"recv_generator: mkdir %s failed",
 					full_fname(fname));
@@ -717,18 +723,12 @@ static void recv_generator(char *fname, struct file_struct *file, int ndx,
 		return;
 	}
 
-	if (max_size && file->length > max_size) {
-		if (verbose > 1) {
-			rprintf(FINFO, "%s is over max-size\n",
-				safe_fname(fname));
-		}
-		return;
-	}
-
 	if (preserve_links && S_ISLNK(file->mode)) {
 #ifdef SUPPORT_LINKS
 		if (safe_symlinks && unsafe_symlink(file->u.link, fname)) {
 			if (verbose) {
+				if (the_file_list->count == 1)
+					fname = f_name(file);
 				rprintf(FINFO,
 					"ignoring unsafe symlink %s -> \"%s\"\n",
 					full_fname(fname),
@@ -821,15 +821,29 @@ static void recv_generator(char *fname, struct file_struct *file, int ndx,
 		return;
 	}
 
-	if (preserve_hard_links && hard_link_check(file, ndx, HL_CHECK_MASTER))
+	if (preserve_hard_links
+	    && hard_link_check(file, ndx, fname, statret, &st,
+			       itemizing, code, HL_CHECK_MASTER))
 		return;
 
 	if (!S_ISREG(file->mode)) {
+		if (the_file_list->count == 1)
+			fname = f_name(file);
 		rprintf(FINFO, "skipping non-regular file \"%s\"\n",
 			safe_fname(fname));
 		return;
 	}
 
+	if (max_size && file->length > max_size) {
+		if (verbose > 1) {
+			if (the_file_list->count == 1)
+				fname = f_name(file);
+			rprintf(FINFO, "%s is over max-size\n",
+				safe_fname(fname));
+		}
+		return;
+	}
+
 	if (opt_ignore_existing && statret == 0) {
 		if (verbose > 1)
 			rprintf(FINFO, "%s exists\n", safe_fname(fname));
@@ -902,12 +916,14 @@ static void recv_generator(char *fname, struct file_struct *file, int ndx,
 				if (hard_link_one(file, ndx, fname, -1, &st,
 						  fnamecmpbuf, 1,
 						  itemizing && verbose > 1,
-						  code) == 0)
+						  code) == 0) {
+					if (preserve_hard_links
+					    && file->link_u.links) {
+						hard_link_cluster(file, ndx,
+								  itemizing,
+								  code);
+					}
 					return;
-				if (verbose) {
-					rsyserr(FINFO, errno, "link %s => %s",
-						full_fname(fnamecmpbuf),
-						safe_fname(fname));
 				}
 				match_level = 2;
 			}
@@ -923,8 +939,25 @@ static void recv_generator(char *fname, struct file_struct *file, int ndx,
 					}
 					match_level = 0;
 					statret = -1;
-				} else
-					set_perms(fname, file, NULL, 0);
+				} else {
+					if (itemizing) {
+						itemize(file, ndx, 0, &st,
+							ITEM_LOCAL_CHANGE, 0,
+							NULL);
+					} else if (verbose && code) {
+						rprintf(code, "%s\n",
+							safe_fname(fname));
+					}
+					set_perms(fname, file, NULL,
+						  maybe_PERMS_REPORT);
+					if (preserve_hard_links
+					    && file->link_u.links) {
+						hard_link_cluster(file, ndx,
+								  itemizing,
+								  code);
+					}
+					return;
+				}
 			} else if (compare_dest || match_level == 1) {
 				fnamecmp = fnamecmpbuf;
 				fnamecmp_type = i;
@@ -960,7 +993,9 @@ static void recv_generator(char *fname, struct file_struct *file, int ndx,
 	}
 
 	if (statret != 0) {
-		if (preserve_hard_links && hard_link_check(file, ndx, HL_SKIP))
+		if (preserve_hard_links
+		    && hard_link_check(file, ndx, fname, statret, &st,
+				       itemizing, code, HL_SKIP))
 			return;
 		if (stat_errno == ENOENT)
 			goto notify_others;
@@ -1001,7 +1036,7 @@ prepare_to_open:
 		statret = 0;
 	}
 
-	if (dry_run || read_batch || whole_file)
+	if (!do_xfers || read_batch || whole_file)
 		goto notify_others;
 
 	if (fuzzy_basis) {
@@ -1018,7 +1053,9 @@ prepare_to_open:
 			full_fname(fnamecmp));
 	    pretend_missing:
 		/* pretend the file didn't exist */
-		if (preserve_hard_links && hard_link_check(file, ndx, HL_SKIP))
+		if (preserve_hard_links
+		    && hard_link_check(file, ndx, fname, statret, &st,
+				       itemizing, code, HL_SKIP))
 			return;
 		statret = real_ret = -1;
 		goto notify_others;
@@ -1073,7 +1110,7 @@ notify_others:
 			fuzzy_file ? fuzzy_file->basename : NULL);
 	}
 
-	if (dry_run) {
+	if (!do_xfers) {
 		if (preserve_hard_links && file->link_u.links)
 			hard_link_cluster(file, ndx, itemizing, code);
 		return;
@@ -1104,27 +1141,26 @@ notify_others:
 
 void generate_files(int f_out, struct file_list *flist, char *local_name)
 {
-	int i, lull_mod;
+	int i;
 	char fbuf[MAXPATHLEN];
 	int itemizing, maybe_PERMS_REPORT;
 	enum logcode code;
+	int lull_mod = allowed_lull * 5;
 	int need_retouch_dir_times = preserve_times && !omit_dir_times;
 	int need_retouch_dir_perms = 0;
 	int save_only_existing = only_existing;
 	int save_opt_ignore_existing = opt_ignore_existing;
 	int save_do_progress = do_progress;
-
-	allowed_lull = read_batch ? 0 : (io_timeout + 1) / 2;
-	lull_mod = allowed_lull * 5;
+	int save_make_backups = make_backups;
 
 	if (protocol_version >= 29) {
 		itemizing = 1;
 		maybe_PERMS_REPORT = log_format_has_i ? 0 : PERMS_REPORT;
 		code = daemon_log_format_has_i ? 0 : FLOG;
 	} else if (am_daemon) {
-		itemizing = daemon_log_format_has_i && !dry_run;
+		itemizing = daemon_log_format_has_i && do_xfers;
 		maybe_PERMS_REPORT = PERMS_REPORT;
-		code = itemizing || dry_run ? FCLIENT : FINFO;
+		code = itemizing || !do_xfers ? FCLIENT : FINFO;
 	} else if (!am_server) {
 		itemizing = log_format_has_i;
 		maybe_PERMS_REPORT = log_format_has_i ? 0 : PERMS_REPORT;
@@ -1153,8 +1189,11 @@ void generate_files(int f_out, struct file_list *flist, char *local_name)
 			: "enabled");
 	}
 
-	if (protocol_version < 29)
-		ignore_timeout = 1;
+	/* Since we often fill up the outgoing socket and then just sit around
+	 * waiting for the other 2 processes to do their thing, we don't want
+	 * to exit on a timeout.  If the data stops flowing, the receiver will
+	 * notice that and let us know via the redo pipe (or its closing). */
+	ignore_timeout = 1;
 
 	for (i = 0; i < flist->count; i++) {
 		struct file_struct *file = flist->files[i];
@@ -1169,7 +1208,8 @@ void generate_files(int f_out, struct file_list *flist, char *local_name)
 		/* We need to ensure that any dirs we create have writeable
 		 * permissions during the time we are putting files within
 		 * them.  This is then fixed after the transfer is done. */
-		if (!am_root && S_ISDIR(file->mode) && !(file->mode & S_IWUSR)) {
+		if (!am_root && S_ISDIR(file->mode) && !(file->mode & S_IWUSR)
+		    && !list_only) {
 			int mode = file->mode | S_IWUSR; /* user write */
 			char *fname = local_name ? local_name : fbuf;
 			if (do_chmod(fname, mode & CHMOD_BITS) < 0) {
@@ -1185,6 +1225,8 @@ void generate_files(int f_out, struct file_list *flist, char *local_name)
 
 		if (allowed_lull && !(i % lull_mod))
 			maybe_send_keepalive();
+		else if (!(i % 200))
+			maybe_flush_socket();
 	}
 	recv_generator(NULL, NULL, 0, 0, 0, code, -1);
 	if (delete_during)
@@ -1197,10 +1239,6 @@ void generate_files(int f_out, struct file_list *flist, char *local_name)
 	ignore_times = 1;
 	make_backups = 0; /* avoid a duplicate backup for inplace processing */
 
-	/* We expect to just sit around now, so don't exit on a timeout.
-	 * If we really get a timeout then the other process should exit. */
-	ignore_timeout = 1;
-
 	if (verbose > 2)
 		rprintf(FINFO,"generate_files phase=%d\n",phase);
 
@@ -1218,6 +1256,7 @@ void generate_files(int f_out, struct file_list *flist, char *local_name)
 	phase++;
 	only_existing = save_only_existing;
 	opt_ignore_existing = save_opt_ignore_existing;
+	make_backups = save_make_backups;
 
 	if (verbose > 2)
 		rprintf(FINFO,"generate_files phase=%d\n",phase);
@@ -1258,8 +1297,10 @@ void generate_files(int f_out, struct file_list *flist, char *local_name)
 				continue;
 			recv_generator(f_name(file), file, i, itemizing,
 				       maybe_PERMS_REPORT, code, -1);
-			if (allowed_lull && !(j++ % lull_mod))
+			if (allowed_lull && !(++j % lull_mod))
 				maybe_send_keepalive();
+			else if (!(j % 200))
+				maybe_flush_socket();
 		}
 	}
 	recv_generator(NULL, NULL, 0, 0, 0, code, -1);

hlink.c

@@ -23,10 +23,14 @@
 extern int dry_run;
 extern int verbose;
 extern int make_backups;
+extern int log_format_has_i;
 extern struct file_list *the_file_list;
 
 #ifdef SUPPORT_HARD_LINKS
 
+#define SKIPPED_LINK (-1)
+#define FINISHED_LINK (-2)
+
 #define FPTR(i) (the_file_list->files[i])
 #define LINKED(p1,p2) (FPTR(p1)->F_DEV == FPTR(p2)->F_DEV \
 		    && FPTR(p1)->F_INODE == FPTR(p2)->F_INODE)
@@ -52,7 +56,7 @@ static int hlink_count;
  * linked, and replace the dev+inode data with the hlindex+next linked list. */
 static void link_idev_data(void)
 {
-	int head, from, to, start;
+	int cur, from, to, start;
 
 	alloc_pool_t hlink_pool;
 	alloc_pool_t idev_pool = the_file_list->hlink_pool;
@@ -62,31 +66,31 @@ static void link_idev_data(void)
 
 	for (from = to = 0; from < hlink_count; from++) {
 		start = from;
-		head = hlink_list[start];
-		while (from < hlink_count-1
-		    && LINKED(hlink_list[from], hlink_list[from+1])) {
-			pool_free(idev_pool, 0, FPTR(hlink_list[from])->link_u.idev);
-			FPTR(hlink_list[from])->link_u.links = pool_talloc(hlink_pool,
+		while (1) {
+			cur = hlink_list[from];
+			if (from == hlink_count-1
+			    || !LINKED(cur, hlink_list[from+1]))
+				break;
+			pool_free(idev_pool, 0, FPTR(cur)->link_u.idev);
+			FPTR(cur)->link_u.links = pool_talloc(hlink_pool,
 			    struct hlink, 1, "hlink_list");
 
-			FPTR(hlink_list[from])->F_HLINDEX = to;
-			FPTR(hlink_list[from])->F_NEXT = hlink_list[from+1];
-			from++;
+			FPTR(cur)->F_HLINDEX = to;
+			FPTR(cur)->F_NEXT = hlink_list[++from];
 		}
+		pool_free(idev_pool, 0, FPTR(cur)->link_u.idev);
 		if (from > start) {
-			pool_free(idev_pool, 0, FPTR(hlink_list[from])->link_u.idev);
-			FPTR(hlink_list[from])->link_u.links = pool_talloc(hlink_pool,
+			int head = hlink_list[start];
+			FPTR(cur)->link_u.links = pool_talloc(hlink_pool,
 			    struct hlink, 1, "hlink_list");
 
 			FPTR(head)->flags |= FLAG_HLINK_TOL;
-			FPTR(hlink_list[from])->F_HLINDEX = to;
-			FPTR(hlink_list[from])->F_NEXT = head;
-			FPTR(hlink_list[from])->flags |= FLAG_HLINK_EOL;
+			FPTR(cur)->F_HLINDEX = to;
+			FPTR(cur)->F_NEXT = head;
+			FPTR(cur)->flags |= FLAG_HLINK_EOL;
 			hlink_list[to++] = head;
-		} else {
-			pool_free(idev_pool, 0, FPTR(head)->link_u.idev);
-			FPTR(head)->link_u.idev = NULL;
-		}
+		} else
+			FPTR(cur)->link_u.links = NULL;
 	}
 
 	if (!to) {
@@ -110,9 +114,6 @@ void init_hard_links(void)
 #ifdef SUPPORT_HARD_LINKS
 	int i;
 
-	if (the_file_list->count < 2)
-		return;
-
 	if (hlink_list)
 		free(hlink_list);
 
@@ -136,18 +137,67 @@ void init_hard_links(void)
 #endif
 }
 
-int hard_link_check(struct file_struct *file, int ndx, int skip)
+#ifdef SUPPORT_HARD_LINKS
+static int maybe_hard_link(struct file_struct *file, int ndx,
+			   char *fname, int statret, STRUCT_STAT *st,
+			   char *toname, STRUCT_STAT *to_st,
+			   int itemizing, enum logcode code)
+{
+	if (statret == 0) {
+		if (st->st_dev == to_st->st_dev
+		 && st->st_ino == to_st->st_ino) {
+			if (itemizing) {
+				itemize(file, ndx, statret, st,
+					ITEM_LOCAL_CHANGE | ITEM_XNAME_FOLLOWS,
+					0, "");
+			}
+			return 0;
+		}
+		if (make_backups) {
+			if (!make_backup(fname))
+				return -1;
+		} else if (robust_unlink(fname)) {
+			rsyserr(FERROR, errno, "unlink %s failed",
+				full_fname(fname));
+			return -1;
+		}
+	}
+	return hard_link_one(file, ndx, fname, statret, st, toname,
+			     0, itemizing, code);
+}
+#endif
+
+int hard_link_check(struct file_struct *file, int ndx, char *fname,
+		    int statret, STRUCT_STAT *st, int itemizing,
+		    enum logcode code, int skip)
 {
 #ifdef SUPPORT_HARD_LINKS
-	if (!hlink_list || !file->link_u.links)
+	int head;
+	if (!file->link_u.links)
 		return 0;
 	if (skip && !(file->flags & FLAG_HLINK_EOL))
-		hlink_list[file->F_HLINDEX] = file->F_NEXT;
-	if (hlink_list[file->F_HLINDEX] != ndx) {
-		if (verbose > 2) {
+		head = hlink_list[file->F_HLINDEX] = file->F_NEXT;
+	else
+		head = hlink_list[file->F_HLINDEX];
+	if (ndx != head) {
+		struct file_struct *head_file = FPTR(head);
+		if (!log_format_has_i && verbose > 1) {
 			rprintf(FINFO, "\"%s\" is a hard link\n",
 				safe_fname(f_name(file)));
 		}
+		if (head_file->F_HLINDEX == FINISHED_LINK) {
+			STRUCT_STAT st2;
+			char *toname = f_name(head_file);
+			if (link_stat(toname, &st2, 0) < 0) {
+				rsyserr(FERROR, errno, "stat %s failed",
+					full_fname(toname));
+				return -1;
+			}
+			maybe_hard_link(file, ndx, fname, statret, st,
+					toname, &st2, itemizing, code);
+			file->F_HLINDEX = FINISHED_LINK;
+		} else
+			file->F_HLINDEX = SKIPPED_LINK;
 		return 1;
 	}
 #endif
@@ -160,10 +210,14 @@ int hard_link_one(struct file_struct *file, int ndx, char *fname,
 		  int itemizing, enum logcode code)
 {
 	if (do_link(toname, fname)) {
-		if (verbose) {
-			rsyserr(FERROR, errno, "link %s => %s failed",
-				full_fname(fname), safe_fname(toname));
-		}
+		if (terse) {
+			if (!verbose)
+				return -1;
+			code = FINFO;
+		} else
+			code = FERROR;
+		rsyserr(code, errno, "link %s => %s failed",
+			full_fname(fname), safe_fname(toname));
 		return -1;
 	}
 
@@ -190,6 +244,7 @@ void hard_link_cluster(struct file_struct *file, int master, int itemizing,
 	STRUCT_STAT st1, st2;
 	int statret, ndx = master;
 
+	file->F_HLINDEX = FINISHED_LINK;
 	if (link_stat(f_name_to(file, hlink1), &st1, 0) < 0)
 		return;
 	if (!(file->flags & FLAG_HLINK_TOL)) {
@@ -201,33 +256,13 @@ void hard_link_cluster(struct file_struct *file, int master, int itemizing,
 	do {
 		ndx = file->F_NEXT;
 		file = FPTR(ndx);
-		if (ndx == master)
+		if (file->F_HLINDEX != SKIPPED_LINK)
 			continue;
 		hlink2 = f_name(file);
-		if ((statret = link_stat(hlink2, &st2, 0)) == 0) {
-			if (st2.st_dev == st1.st_dev
-			    && st2.st_ino == st1.st_ino) {
-				if (itemizing) {
-					itemize(file, ndx, statret, &st2,
-						ITEM_LOCAL_CHANGE | ITEM_XNAME_FOLLOWS,
-						0, "");
-				}
-				continue;
-			}
-			if (make_backups) {
-				if (!make_backup(hlink2))
-					continue;
-			} else if (robust_unlink(hlink2)) {
-				if (verbose > 0) {
-					rsyserr(FINFO, errno,
-						"unlink %s failed",
-						full_fname(hlink2));
-				}
-				continue;
-			}
-		}
-		hard_link_one(file, ndx, hlink2, statret,
-			      &st2, hlink1, 0, itemizing, code);
+		statret = link_stat(hlink2, &st2, 0);
+		maybe_hard_link(file, ndx, hlink2, statret, &st2,
+				hlink1, &st1, itemizing, code);
+		file->F_HLINDEX = FINISHED_LINK;
 	} while (!(file->flags & FLAG_HLINK_EOL));
 #endif
 }

io.c

@@ -49,6 +49,7 @@ extern int am_daemon;
 extern int am_sender;
 extern int am_generator;
 extern int eol_nulls;
+extern int read_batch;
 extern int csum_length;
 extern int checksum_seed;
 extern int protocol_version;
@@ -59,7 +60,6 @@ extern struct stats stats;
 extern struct file_list *the_file_list;
 
 const char phase_unknown[] = "unknown";
-int select_timeout = SELECT_TIMEOUT;
 int ignore_timeout = 0;
 int batch_fd = -1;
 int batch_gen_fd = -1;
@@ -90,7 +90,8 @@ int sock_f_out = -1;
 
 static int io_multiplexing_out;
 static int io_multiplexing_in;
-static time_t last_io;
+static time_t last_io_in;
+static time_t last_io_out;
 static int no_flush;
 
 static int write_batch_monitor_in = -1;
@@ -103,6 +104,7 @@ static char *io_filesfrom_bp;
 static char io_filesfrom_lastchar;
 static int io_filesfrom_buflen;
 static size_t contiguous_write_len = 0;
+static int select_timeout = SELECT_TIMEOUT;
 
 static void read_loop(int fd, char *buf, size_t len);
 
@@ -166,17 +168,17 @@ static void check_timeout(void)
 	if (!io_timeout || ignore_timeout)
 		return;
 
-	if (!last_io) {
-		last_io = time(NULL);
+	if (!last_io_in) {
+		last_io_in = time(NULL);
 		return;
 	}
 
 	t = time(NULL);
 
-	if (t - last_io >= io_timeout) {
+	if (t - last_io_in >= io_timeout) {
 		if (!am_server && !am_daemon) {
 			rprintf(FERROR, "io timeout after %d seconds -- exiting\n",
-				(int)(t-last_io));
+				(int)(t-last_io_in));
 		}
 		exit_cleanup(RERR_TIMEOUT);
 	}
@@ -190,6 +192,18 @@ void io_set_sock_fds(int f_in, int f_out)
 	sock_f_out = f_out;
 }
 
+void set_io_timeout(int secs)
+{
+	io_timeout = secs;
+
+	if (!io_timeout || io_timeout > SELECT_TIMEOUT)
+		select_timeout = SELECT_TIMEOUT;
+	else
+		select_timeout = io_timeout;
+
+	allowed_lull = read_batch ? 0 : (io_timeout + 1) / 2;
+}
+
 /* Setup the fd used to receive MSG_* messages.  Only needed during the
  * early stages of being a local sender (up through the sending of the
  * file list) or when we're the generator (to fetch the messages from
@@ -574,8 +588,8 @@ static int read_timeout(int fd, char *buf, size_t len)
 		len -= n;
 		ret += n;
 
-		if (io_timeout && fd == sock_f_in)
-			last_io = time(NULL);
+		if (fd == sock_f_in && io_timeout)
+			last_io_in = time(NULL);
 	}
 
 	return ret;
@@ -665,9 +679,16 @@ void io_end_buffering(void)
 }
 
 
+void maybe_flush_socket(void)
+{
+	if (iobuf_out && iobuf_out_cnt && time(NULL) - last_io_out >= 5)
+		io_flush(NORMAL_FLUSH);
+}
+
+
 void maybe_send_keepalive(void)
 {
-	if (time(NULL) - last_io >= allowed_lull) {
+	if (time(NULL) - last_io_out >= allowed_lull) {
 		if (!iobuf_out || !iobuf_out_cnt) {
 			if (protocol_version < 29)
 				return; /* there's nothing we can do */
@@ -705,8 +726,13 @@ static int readfd_unbuffered(int fd, char *buf, size_t len)
 {
 	static size_t remaining;
 	static size_t iobuf_in_ndx;
+	size_t msg_bytes;
 	int tag, ret = 0;
-	char line[MAXPATHLEN+1];
+#if MAXPATHLEN < 4096
+	char line[4096+1024];
+#else
+	char line[MAXPATHLEN+1024];
+#endif
 
 	if (!iobuf_in || fd != sock_f_in)
 		return read_timeout(fd, buf, len);
@@ -729,56 +755,52 @@ static int readfd_unbuffered(int fd, char *buf, size_t len)
 		read_loop(fd, line, 4);
 		tag = IVAL(line, 0);
 
-		remaining = tag & 0xFFFFFF;
+		msg_bytes = tag & 0xFFFFFF;
 		tag = (tag >> 24) - MPLEX_BASE;
 
 		switch (tag) {
 		case MSG_DATA:
-			if (remaining > iobuf_in_siz) {
+			if (msg_bytes > iobuf_in_siz) {
 				if (!(iobuf_in = realloc_array(iobuf_in, char,
-							       remaining)))
+							       msg_bytes)))
 					out_of_memory("readfd_unbuffered");
-				iobuf_in_siz = remaining;
+				iobuf_in_siz = msg_bytes;
 			}
-			read_loop(fd, iobuf_in, remaining);
+			read_loop(fd, iobuf_in, msg_bytes);
+			remaining = msg_bytes;
 			iobuf_in_ndx = 0;
 			break;
 		case MSG_DELETED:
-			if (remaining >= sizeof line) {
-				rprintf(FERROR, "invalid multi-message %d:%ld\n",
-					tag, (long)remaining);
-				exit_cleanup(RERR_STREAMIO);
-			}
-			read_loop(fd, line, remaining);
-			line[remaining] = '\0';
+			if (msg_bytes >= sizeof line)
+				goto overflow;
+			read_loop(fd, line, msg_bytes);
+			line[msg_bytes] = '\0';
 			/* A directory name was sent with the trailing null */
-			if (remaining > 0 && !line[remaining-1])
+			if (msg_bytes > 0 && !line[msg_bytes-1])
 				log_delete(line, S_IFDIR);
 			else
 				log_delete(line, S_IFREG);
-			remaining = 0;
 			break;
 		case MSG_SUCCESS:
-			if (remaining != 4) {
+			if (msg_bytes != 4) {
 				rprintf(FERROR, "invalid multi-message %d:%ld [%s]\n",
-					tag, (long)remaining, who_am_i());
+					tag, (long)msg_bytes, who_am_i());
 				exit_cleanup(RERR_STREAMIO);
 			}
-			read_loop(fd, line, remaining);
+			read_loop(fd, line, msg_bytes);
 			successful_send(IVAL(line, 0));
-			remaining = 0;
 			break;
 		case MSG_INFO:
 		case MSG_ERROR:
-			if (remaining >= sizeof line) {
+			if (msg_bytes >= sizeof line) {
+			    overflow:
 				rprintf(FERROR,
 					"multiplexing overflow %d:%ld [%s]\n",
-					tag, (long)remaining, who_am_i());
+					tag, (long)msg_bytes, who_am_i());
 				exit_cleanup(RERR_STREAMIO);
 			}
-			read_loop(fd, line, remaining);
-			rwrite((enum logcode)tag, line, remaining);
-			remaining = 0;
+			read_loop(fd, line, msg_bytes);
+			rwrite((enum logcode)tag, line, msg_bytes);
 			break;
 		default:
 			rprintf(FERROR, "unexpected tag %d [%s]\n",
@@ -1006,7 +1028,7 @@ static void writefd_unbuffered(int fd,char *buf,size_t len)
 {
 	size_t n, total = 0;
 	fd_set w_fds, r_fds;
-	int maxfd, count, ret;
+	int maxfd, count, ret, using_r_fds;
 	struct timeval tv;
 
 	no_flush++;
@@ -1021,18 +1043,15 @@ static void writefd_unbuffered(int fd,char *buf,size_t len)
 			FD_SET(msg_fd_in,&r_fds);
 			if (msg_fd_in > maxfd)
 				maxfd = msg_fd_in;
-		}
-		if (fd != sock_f_out && iobuf_out_cnt && no_flush == 1) {
-			FD_SET(sock_f_out, &w_fds);
-			if (sock_f_out > maxfd)
-				maxfd = sock_f_out;
-		}
+			using_r_fds = 1;
+		} else
+			using_r_fds = 0;
 
 		tv.tv_sec = select_timeout;
 		tv.tv_usec = 0;
 
 		errno = 0;
-		count = select(maxfd + 1, msg_fd_in >= 0 ? &r_fds : NULL,
+		count = select(maxfd + 1, using_r_fds ? &r_fds : NULL,
 			       &w_fds, NULL, &tv);
 
 		if (count <= 0) {
@@ -1042,7 +1061,7 @@ static void writefd_unbuffered(int fd,char *buf,size_t len)
 			continue;
 		}
 
-		if (msg_fd_in >= 0 && FD_ISSET(msg_fd_in, &r_fds))
+		if (using_r_fds && FD_ISSET(msg_fd_in, &r_fds))
 			read_msg_fd();
 
 		if (!FD_ISSET(fd, &w_fds))
@@ -1072,7 +1091,7 @@ static void writefd_unbuffered(int fd,char *buf,size_t len)
 			/* If the other side is sending us error messages, try
 			 * to grab any messages they sent before they died. */
 			while (fd == sock_f_out && io_multiplexing_in) {
-				io_timeout = select_timeout = 30;
+				set_io_timeout(30);
 				ignore_timeout = 0;
 				readfd_unbuffered(sock_f_in, io_filesfrom_buf,
 						  sizeof io_filesfrom_buf);
@@ -1083,8 +1102,8 @@ static void writefd_unbuffered(int fd,char *buf,size_t len)
 		total += ret;
 
 		if (fd == sock_f_out) {
-			if (io_timeout)
-				last_io = time(NULL);
+			if (io_timeout || am_generator)
+				last_io_out = time(NULL);
 			sleep_for_bwlimit(ret);
 		}
 	}

loadparm.c

@@ -104,7 +104,6 @@ typedef struct
 	char *socket_options;
 	char *bind_address;
 	int syslog_facility;
-	int max_verbosity;
 	int rsync_port;
 } global;
 
@@ -141,8 +140,11 @@ typedef struct
 	char *log_format;
 	char *refuse_options;
 	char *dont_compress;
+	char *prexfer_exec;
+	char *postxfer_exec;
 	int timeout;
 	int max_connections;
+	int max_verbosity;
 	BOOL ignore_nonreadable;
 } service;
 
@@ -160,17 +162,8 @@ static service sDefault =
 	True,    /* use chroot */
 	False,   /* transfer logging */
 	False,   /* ignore errors */
-	"nobody",/* uid */
-
-	/* TODO: This causes problems on Debian, where it is called
-	 * "nogroup".  Debian patch this in their version of the
-	 * package, but it would be nice to be consistent.  Possibly
-	 * other systems are different again.
-	 *
-	 * What is the best behaviour?  Perhaps always using (gid_t)
-	 * -2? */
-	"nobody",/* gid */
-
+	NOBODY_USER,/* uid */
+	NOBODY_GROUP,/* gid */
 	NULL,    /* hosts allow */
 	NULL,    /* hosts deny */
 	NULL,    /* auth users */
@@ -184,8 +177,11 @@ static service sDefault =
 	"%o %h [%a] %m (%u) %f %l",    /* log format */
 	NULL,    /* refuse options */
 	"*.gz *.tgz *.zip *.z *.rpm *.deb *.iso *.bz2 *.tbz",    /* dont compress */
+	NULL,     /* prexfer_exec */
+	NULL,     /* postxfer_exec */
 	0,        /* timeout */
 	0,        /* max connections */
+	1,        /* max verbosity */
 	False     /* ignore nonreadable */
 };
 
@@ -274,12 +270,12 @@ static struct parm_struct parm_table[] =
   {"socket options",   P_STRING,  P_GLOBAL, &Globals.socket_options,NULL,  0},
   {"log file",         P_STRING,  P_GLOBAL, &Globals.log_file,      NULL,  0},
   {"pid file",         P_STRING,  P_GLOBAL, &Globals.pid_file,      NULL,  0},
-  {"max verbosity",    P_INTEGER, P_GLOBAL, &Globals.max_verbosity, NULL,  0},
   {"port",             P_INTEGER, P_GLOBAL, &Globals.rsync_port,    NULL,  0},
   {"address",          P_STRING,  P_GLOBAL, &Globals.bind_address,  NULL,  0},
 
   {"timeout",          P_INTEGER, P_LOCAL,  &sDefault.timeout,     NULL,  0},
   {"max connections",  P_INTEGER, P_LOCAL,  &sDefault.max_connections,NULL, 0},
+  {"max verbosity",    P_INTEGER, P_LOCAL,  &sDefault.max_verbosity,NULL,  0},
   {"name",             P_STRING,  P_LOCAL,  &sDefault.name,        NULL,   0},
   {"comment",          P_STRING,  P_LOCAL,  &sDefault.comment,     NULL,   0},
   {"lock file",        P_STRING,  P_LOCAL,  &sDefault.lock_file,   NULL,   0},
@@ -306,6 +302,10 @@ static struct parm_struct parm_table[] =
   {"log format",       P_STRING,  P_LOCAL,  &sDefault.log_format,  NULL,   0},
   {"refuse options",   P_STRING,  P_LOCAL,  &sDefault.refuse_options,NULL, 0},
   {"dont compress",    P_STRING,  P_LOCAL,  &sDefault.dont_compress,NULL,  0},
+#ifdef HAVE_PUTENV
+  {"pre-xfer exec",    P_STRING,  P_LOCAL,  &sDefault.prexfer_exec, NULL,  0},
+  {"post-xfer exec",   P_STRING,  P_LOCAL,  &sDefault.postxfer_exec,NULL,  0},
+#endif
   {NULL,               P_BOOL,    P_NONE,   NULL,                  NULL,   0}
 };
 
@@ -319,7 +319,6 @@ static void init_globals(void)
 #ifdef LOG_DAEMON
 	Globals.syslog_facility = LOG_DAEMON;
 #endif
-	Globals.max_verbosity = 1;
 }
 
 /***************************************************************************
@@ -359,7 +358,6 @@ FN_GLOBAL_STRING(lp_log_file, &Globals.log_file)
 FN_GLOBAL_STRING(lp_pid_file, &Globals.pid_file)
 FN_GLOBAL_STRING(lp_socket_options, &Globals.socket_options)
 FN_GLOBAL_INTEGER(lp_syslog_facility, &Globals.syslog_facility)
-FN_GLOBAL_INTEGER(lp_max_verbosity, &Globals.max_verbosity)
 FN_GLOBAL_INTEGER(lp_rsync_port, &Globals.rsync_port)
 FN_GLOBAL_STRING(lp_bind_address, &Globals.bind_address)
 
@@ -389,8 +387,11 @@ FN_LOCAL_STRING(lp_include_from, include_from)
 FN_LOCAL_STRING(lp_log_format, log_format)
 FN_LOCAL_STRING(lp_refuse_options, refuse_options)
 FN_LOCAL_STRING(lp_dont_compress, dont_compress)
+FN_LOCAL_STRING(lp_prexfer_exec, prexfer_exec)
+FN_LOCAL_STRING(lp_postxfer_exec, postxfer_exec)
 FN_LOCAL_INTEGER(lp_timeout, timeout)
 FN_LOCAL_INTEGER(lp_max_connections, max_connections)
+FN_LOCAL_INTEGER(lp_max_verbosity, max_verbosity)
 
 /* local prototypes */
 static int    strwicmp(char *psz1, char *psz2);

log.c

@@ -44,6 +44,7 @@ extern char *auth_user;
 extern char *log_format;
 
 static int log_initialised;
+static int logfile_was_closed;
 static char *logfname;
 static FILE *logfile;
 struct stats stats;
@@ -59,7 +60,6 @@ struct {
 	{ RERR_FILESELECT , "errors selecting input/output files, dirs" },
 	{ RERR_UNSUPPORTED, "requested action not supported" },
 	{ RERR_STARTCLIENT, "error starting client-server protocol" },
-	{ RERR_LOG_FAILURE, "daemon unable to append to log-file" },
 	{ RERR_SOCKETIO   , "error in socket IO" },
 	{ RERR_FILEIO     , "error in file IO" },
 	{ RERR_STREAMIO   , "error in rsync protocol data stream" },
@@ -97,9 +97,9 @@ static char const *rerr_name(int code)
 
 static void logit(int priority, char *buf)
 {
-	if (logfname) {
-		if (!logfile)
-			log_open();
+	if (logfile_was_closed)
+		logfile_reopen();
+	if (logfile) {
 		fprintf(logfile,"%s [%d] %s",
 			timestring(time(NULL)), (int)getpid(), buf);
 		fflush(logfile);
@@ -108,9 +108,48 @@ static void logit(int priority, char *buf)
 	}
 }
 
+static void syslog_init()
+{
+	static int been_here = 0;
+	int options = LOG_PID;
+
+	if (been_here)
+		return;
+	been_here = 1;
+
+#ifdef LOG_NDELAY
+	options |= LOG_NDELAY;
+#endif
+
+#ifdef LOG_DAEMON
+	openlog("rsyncd", options, lp_syslog_facility());
+#else
+	openlog("rsyncd", options);
+#endif
+
+#ifndef LOG_NDELAY
+	logit(LOG_INFO, "rsyncd started\n");
+#endif
+}
+
+static void logfile_open(void)
+{
+	extern int orig_umask;
+	int old_umask = umask(022 | orig_umask);
+	logfile = fopen(logfname, "a");
+	umask(old_umask);
+	if (!logfile) {
+		int fopen_errno = errno;
+		/* Rsync falls back to using syslog on failure. */
+		syslog_init();
+		rsyserr(FERROR, fopen_errno,
+			"failed to open log-file %s", logfname);
+		rprintf(FINFO, "Ignoring \"log file\" setting.\n");
+	}
+}
+
 void log_init(void)
 {
-	int options = LOG_PID;
 	time_t t;
 
 	if (log_initialised)
@@ -125,52 +164,29 @@ void log_init(void)
 
 	/* optionally use a log file instead of syslog */
 	logfname = lp_log_file();
-	if (logfname) {
-		if (*logfname) {
-			log_open();
-			return;
-		}
-		logfname = NULL;
-	}
-
-#ifdef LOG_NDELAY
-	options |= LOG_NDELAY;
-#endif
-
-#ifdef LOG_DAEMON
-	openlog("rsyncd", options, lp_syslog_facility());
-#else
-	openlog("rsyncd", options);
-#endif
-
-#ifndef LOG_NDELAY
-	logit(LOG_INFO,"rsyncd started\n");
-#endif
+	if (logfname && *logfname)
+		logfile_open();
+	else
+		syslog_init();
 }
 
-void log_open(void)
-{
-	if (logfname && !logfile) {
-		extern int orig_umask;
-		int old_umask = umask(022 | orig_umask);
-		logfile = fopen(logfname, "a");
-		umask(old_umask);
-		if (!logfile) {
-			am_daemon = 0; /* avoid trying to log again */
-			rsyserr(FERROR, errno, "fopen() of log-file failed");
-			exit_cleanup(RERR_LOG_FAILURE);
-		}
-	}
-}
-
-void log_close(void)
+void logfile_close(void)
 {
 	if (logfile) {
+		logfile_was_closed = 1;
 		fclose(logfile);
 		logfile = NULL;
 	}
 }
 
+void logfile_reopen(void)
+{
+	if (logfile_was_closed) {
+		logfile_was_closed = 0;
+		logfile_open();
+	}
+}
+
 /* this is the underlying (unformatted) rsync debugging function. Call
  * it with FINFO, FERROR or FLOG */
 void rwrite(enum logcode code, char *buf, int len)
@@ -496,7 +512,7 @@ static void log_formatted(enum logcode code, char *format, char *op,
 				int i;
 				for (i = 2; n[i]; i++)
 					n[i] = ch;
-			} else if (!(iflags & (ITEM_TRANSFER|ITEM_LOCAL_CHANGE))) {
+			} else if (n[0] == '.' || n[0] == 'h') {
 				int i;
 				for (i = 2; n[i]; i++) {
 					if (n[i] != '.')
@@ -586,12 +602,15 @@ void log_item(struct file_struct *file, struct stats *initial_stats,
 void maybe_log_item(struct file_struct *file, int iflags, int itemizing,
 		    char *buf)
 {
-	int see_item = itemizing && (iflags || verbose > 1);
+	int significant_flags = iflags & SIGNIFICANT_ITEM_FLAGS;
+	int see_item = itemizing && (significant_flags || *buf || verbose > 1);
+	int local_change = iflags & ITEM_LOCAL_CHANGE
+	    && (!(iflags & ITEM_XNAME_FOLLOWS) || significant_flags);
 	if (am_server) {
 		if (am_daemon && !dry_run && see_item)
 			log_item(file, &stats, iflags, buf);
-	} else if (see_item || iflags & ITEM_LOCAL_CHANGE || *buf
-	    || (S_ISDIR(file->mode) && iflags & SIGNIFICANT_ITEM_FLAGS))
+	} else if (see_item || local_change || *buf
+	    || (S_ISDIR(file->mode) && significant_flags))
 		log_item(file, &stats, iflags, buf);
 }
 

main.c

@@ -20,6 +20,9 @@
 */
 
 #include "rsync.h"
+#if defined CONFIG_LOCALE && defined HAVE_LOCALE_H
+#include <locale.h>
+#endif
 
 extern int verbose;
 extern int dry_run;
@@ -43,11 +46,8 @@ extern int keep_dirlinks;
 extern int preserve_hard_links;
 extern int protocol_version;
 extern int recurse;
-extern int fuzzy_basis;
 extern int relative_paths;
 extern int rsync_port;
-extern int inplace;
-extern int make_backups;
 extern int whole_file;
 extern int read_batch;
 extern int write_batch;
@@ -57,8 +57,6 @@ extern int filesfrom_fd;
 extern pid_t cleanup_child_pid;
 extern struct stats stats;
 extern char *filesfrom_host;
-extern char *partial_dir;
-extern char *basis_dir[];
 extern char *rsync_path;
 extern char *shell_cmd;
 extern char *batch_name;
@@ -160,7 +158,9 @@ static void handle_stats(int f)
 
 	/* this is the client */
 
-	if (!am_sender) {
+	if (f < 0 && !am_sender) /* e.g. when we got an empty file list. */
+		; 
+	else if (!am_sender) {
 		/* Read the first two in opposite order because the meaning of
 		 * read/write swaps when switching from sender to receiver. */
 		total_written = read_longint(f);
@@ -181,7 +181,10 @@ static void handle_stats(int f)
 			write_longint(batch_fd, stats.flist_xfertime);
 		}
 	}
+}
 
+static void output_summary(void)
+{
 	if (do_stats) {
 		rprintf(FINFO,"\nNumber of files: %d\n", stats.num_files);
 		rprintf(FINFO,"Number of files transferred: %d\n",
@@ -209,12 +212,6 @@ static void handle_stats(int f)
 			(double)total_read);
 	}
 
-	fflush(stdout);
-	fflush(stderr);
-}
-
-static void output_summary(void)
-{
 	if (verbose || do_stats) {
 		rprintf(FINFO,
 			"\nsent %.0f bytes  received %.0f bytes  %.2f bytes/sec\n",
@@ -291,7 +288,7 @@ static pid_t do_cmd(char *cmd, char *machine, char *user, char *path,
 
 		for (tok = strtok(cmd, " "); tok; tok = strtok(NULL, " ")) {
 			/* Comparison leaves rooms for server_options(). */
-			if (argc >= MAX_ARGS - 100) {
+			if (argc >= MAX_ARGS - MAX_SERVER_ARGS) {
 				rprintf(FERROR, "internal: args[] overflowed in do_cmd()\n");
 				exit_cleanup(RERR_SYNTAX);
 			}
@@ -591,7 +588,7 @@ static int do_recv(int f_in,int f_out,struct file_list *flist,char *local_name)
 
 	am_generator = 1;
 	close_multiplexing_in();
-	if (write_batch)
+	if (write_batch && !am_server)
 		stop_write_batch();
 
 	close(error_pipe[1]);
@@ -764,7 +761,7 @@ int client_run(int f_in, int f_out, pid_t pid, int argc, char *argv[])
 		if (filesfrom_host)
 			filesfrom_fd = f_in;
 
-		if (write_batch)
+		if (write_batch && !am_server)
 			start_write_batch(f_out);
 		flist = send_file_list(f_out, argc, argv);
 		set_msg_fd_in(-1);
@@ -802,20 +799,19 @@ int client_run(int f_in, int f_out, pid_t pid, int argc, char *argv[])
 		filesfrom_fd = -1;
 	}
 
-	if (write_batch)
+	if (write_batch && !am_server)
 		start_write_batch(f_in);
 	flist = recv_file_list(f_in);
-	if (!flist || flist->count == 0) {
-		rprintf(FINFO, "client: nothing to do: "
-			"perhaps you need to specify some filenames or "
-			"the --recursive option?\n");
-		exit_cleanup(0);
-	}
 	the_file_list = flist;
 
-	local_name = get_local_name(flist,argv[0]);
+	if (flist && flist->count > 0) {
+		local_name = get_local_name(flist, argv[0]);
 
-	status2 = do_recv(f_in,f_out,flist,local_name);
+		status2 = do_recv(f_in, f_out, flist, local_name);
+	} else {
+		handle_stats(-1);
+		output_summary();
+	}
 
 	if (pid != -1) {
 		if (verbose > 3)
@@ -871,6 +867,13 @@ static int start_client(int argc, char *argv[])
 		argc--;
 		shell_path = check_for_hostspec(argv[0], &shell_machine, &rsync_port);
 		if (shell_path) { /* source is remote */
+			char *dummy1;
+			int dummy2;
+			if (argc && check_for_hostspec(argv[argc], &dummy1, &dummy2)) {
+				rprintf(FERROR,
+					"The source and destination cannot both be remote.\n");
+				exit_cleanup(RERR_SYNTAX);
+			}
 			argv++;
 			if (filesfrom_host && *filesfrom_host
 			    && strcmp(filesfrom_host, shell_machine) != 0) {
@@ -1115,6 +1118,10 @@ int main(int argc,char *argv[])
 	 * see the EPIPE. */
 	signal(SIGPIPE, SIG_IGN);
 
+#if defined CONFIG_LOCALE && defined HAVE_SETLOCALE
+	setlocale(LC_CTYPE, "");
+#endif
+
 	/* Initialize push_dir here because on some old systems getcwd
 	 * (implemented by forking "pwd" and reading its output) doesn't
 	 * work when there are other child processes.  Also, on all systems
@@ -1123,7 +1130,7 @@ int main(int argc,char *argv[])
 
 	init_flist();
 
-	if (write_batch || read_batch) {
+	if ((write_batch || read_batch) && !am_server) {
 		if (write_batch)
 			write_batch_shell_file(orig_argc, orig_argv, argc);
 
@@ -1142,6 +1149,8 @@ int main(int argc,char *argv[])
 		if (read_batch)
 			read_stream_flags(batch_fd);
 	}
+	if (write_batch < 0)
+		dry_run = 1;
 
 	if (am_daemon && !am_server)
 		return daemon_main();

match.c

@@ -23,6 +23,7 @@ extern int verbose;
 extern int am_server;
 extern int do_progress;
 extern int checksum_seed;
+extern int append_mode;
 
 int updating_basis_file;
 
@@ -330,6 +331,21 @@ void match_sums(int f, struct sum_struct *s, struct map_struct *buf, OFF_T len)
 
 	sum_init(checksum_seed);
 
+	if (append_mode) {
+		OFF_T j = 0;
+		for (j = CHUNK_SIZE; j < s->flength; j += CHUNK_SIZE) {
+			sum_update(map_ptr(buf, last_match, CHUNK_SIZE),
+				   CHUNK_SIZE);
+			last_match = j;
+		}
+		if (last_match < s->flength) {
+			int32 len = s->flength - last_match;
+			sum_update(map_ptr(buf, last_match, len), len);
+			last_match = s->flength;
+		}
+		s->count = 0;
+	}
+
 	if (len > 0 && s->count > 0) {
 		build_hash_table(s);
 
@@ -343,7 +359,7 @@ void match_sums(int f, struct sum_struct *s, struct map_struct *buf, OFF_T len)
 	} else {
 		OFF_T j;
 		/* by doing this in pieces we avoid too many seeks */
-		for (j = CHUNK_SIZE; j < len; j += CHUNK_SIZE)
+		for (j = last_match + CHUNK_SIZE; j < len; j += CHUNK_SIZE)
 			matched(f, s, buf, j, -2);
 		matched(f, s, buf, len, -1);
 	}

options.c

@@ -23,7 +23,6 @@
 
 extern int module_id;
 extern int sanitize_paths;
-extern int select_timeout;
 extern struct filter_list_struct filter_list;
 extern struct filter_list_struct server_filter_list;
 
@@ -39,6 +38,7 @@ int make_backups = 0;
  **/
 int whole_file = -1;
 
+int append_mode = 0;
 int archive_mode = 0;
 int keep_dirlinks = 0;
 int copy_links = 0;
@@ -53,6 +53,7 @@ int omit_dir_times = 0;
 int update_only = 0;
 int cvs_exclude = 0;
 int dry_run = 0;
+int do_xfers = 1;
 int ignore_times = 0;
 int delete_mode = 0;
 int delete_during = 0;
@@ -75,6 +76,7 @@ int implied_dirs = 1;
 int numeric_ids = 0;
 int force_delete = 0;
 int io_timeout = 0;
+int allowed_lull = 0;
 char *files_from = NULL;
 int filesfrom_fd = -1;
 char *filesfrom_host = NULL;
@@ -165,6 +167,7 @@ static int modify_window_set;
 static int itemize_changes = 0;
 static int refused_delete, refused_archive_part;
 static int refused_partial, refused_progress, refused_delete_before;
+static int refused_inplace;
 static char *max_size_arg;
 static char partialdir_for_delayupdate[] = ".~tmp~";
 
@@ -250,7 +253,7 @@ void usage(enum logcode F)
   rprintf(F,"\nrsync is a file transfer program capable of efficient remote update\nvia a fast differencing algorithm.\n\n");
 
   rprintf(F,"Usage: rsync [OPTION]... SRC [SRC]... [USER@]HOST:DEST\n");
-  rprintf(F,"  or   rsync [OPTION]... [USER@]HOST:SRC DEST\n");
+  rprintf(F,"  or   rsync [OPTION]... [USER@]HOST:SRC [DEST]\n");
   rprintf(F,"  or   rsync [OPTION]... SRC [SRC]... DEST\n");
   rprintf(F,"  or   rsync [OPTION]... [USER@]HOST::SRC [DEST]\n");
   rprintf(F,"  or   rsync [OPTION]... SRC [SRC]... [USER@]HOST::DEST\n");
@@ -273,6 +276,7 @@ void usage(enum logcode F)
   rprintf(F,"     --suffix=SUFFIX         set backup suffix (default %s w/o --backup-dir)\n",BACKUP_SUFFIX);
   rprintf(F," -u, --update                skip files that are newer on the receiver\n");
   rprintf(F,"     --inplace               update destination files in-place (SEE MAN PAGE)\n");
+  rprintf(F,"     --append                append data onto shorter files\n");
   rprintf(F," -d, --dirs                  transfer directories without recursing\n");
   rprintf(F," -l, --links                 copy symlinks as symlinks\n");
   rprintf(F," -L, --copy-links            transform symlink into referent file/dir\n");
@@ -330,8 +334,8 @@ void usage(enum logcode F)
   rprintf(F,"     --include=PATTERN       don't exclude files matching PATTERN\n");
   rprintf(F,"     --include-from=FILE     read include patterns from FILE\n");
   rprintf(F,"     --files-from=FILE       read list of source-file names from FILE\n");
-  rprintf(F," -0, --from0                 all *-from file lists are delimited by nulls\n");
-  rprintf(F,"     --version               print version number\n");
+  rprintf(F," -0, --from0                 all *-from/filter files are delimited by 0s\n");
+  rprintf(F,"     --address=ADDRESS       bind address for outgoing socket to daemon\n");
   rprintf(F,"     --port=PORT             specify double-colon alternate port number\n");
   rprintf(F,"     --blocking-io           use blocking I/O for the remote shell\n");
   rprintf(F,"     --no-blocking-io        turn off blocking I/O when it is the default\n");
@@ -339,17 +343,19 @@ void usage(enum logcode F)
   rprintf(F,"     --progress              show progress during transfer\n");
   rprintf(F," -P                          same as --partial --progress\n");
   rprintf(F," -i, --itemize-changes       output a change-summary for all updates\n");
-  rprintf(F,"     --log-format=FORMAT     log file-transfers using specified format\n");
+  rprintf(F,"     --log-format=FORMAT     output filenames using the specified format\n");
   rprintf(F,"     --password-file=FILE    read password from FILE\n");
   rprintf(F,"     --list-only             list the files instead of copying them\n");
   rprintf(F,"     --bwlimit=KBPS          limit I/O bandwidth; KBytes per second\n");
   rprintf(F,"     --write-batch=FILE      write a batched update to FILE\n");
+  rprintf(F,"     --only-write-batch=FILE like --write-batch but w/o updating destination\n");
   rprintf(F,"     --read-batch=FILE       read a batched update from FILE\n");
   rprintf(F,"     --protocol=NUM          force an older protocol version to be used\n");
 #ifdef INET6
   rprintf(F," -4, --ipv4                  prefer IPv4\n");
   rprintf(F," -6, --ipv6                  prefer IPv6\n");
 #endif
+  rprintf(F,"     --version               print version number\n");
   rprintf(F," -h, --help                  show this help screen\n");
 
   rprintf(F,"\nUse \"rsync --daemon --help\" to see the daemon-mode command-line options.\n");
@@ -360,7 +366,7 @@ void usage(enum logcode F)
 enum {OPT_VERSION = 1000, OPT_DAEMON, OPT_SENDER, OPT_EXCLUDE, OPT_EXCLUDE_FROM,
       OPT_FILTER, OPT_COMPARE_DEST, OPT_COPY_DEST, OPT_LINK_DEST,
       OPT_INCLUDE, OPT_INCLUDE_FROM, OPT_MODIFY_WINDOW,
-      OPT_READ_BATCH, OPT_WRITE_BATCH, OPT_TIMEOUT, OPT_MAX_SIZE,
+      OPT_READ_BATCH, OPT_WRITE_BATCH, OPT_ONLY_WRITE_BATCH, OPT_MAX_SIZE,
       OPT_REFUSED_BASE = 9000};
 
 static struct poptOption long_options[] = {
@@ -401,6 +407,7 @@ static struct poptOption long_options[] = {
   {"links",           'l', POPT_ARG_NONE,   &preserve_links, 0, 0, 0 },
   {"copy-links",      'L', POPT_ARG_NONE,   &copy_links, 0, 0, 0 },
   {"keep-dirlinks",   'K', POPT_ARG_NONE,   &keep_dirlinks, 0, 0, 0 },
+  {"append",           0,  POPT_ARG_VAL,    &append_mode, 1, 0, 0 },
   {"whole-file",      'W', POPT_ARG_VAL,    &whole_file, 1, 0, 0 },
   {"no-whole-file",    0,  POPT_ARG_VAL,    &whole_file, 0, 0, 0 },
   {"copy-unsafe-links",0,  POPT_ARG_NONE,   &copy_unsafe_links, 0, 0, 0 },
@@ -424,7 +431,7 @@ static struct poptOption long_options[] = {
   {"block-size",      'B', POPT_ARG_LONG,   &block_size, 0, 0, 0 },
   {"max-delete",       0,  POPT_ARG_INT,    &max_delete, 0, 0, 0 },
   {"max-size",         0,  POPT_ARG_STRING, &max_size_arg,  OPT_MAX_SIZE, 0, 0 },
-  {"timeout",          0,  POPT_ARG_INT,    &io_timeout, OPT_TIMEOUT, 0, 0 },
+  {"timeout",          0,  POPT_ARG_INT,    &io_timeout, 0, 0, 0 },
   {"temp-dir",        'T', POPT_ARG_STRING, &tmpdir, 0, 0, 0 },
   {"compare-dest",     0,  POPT_ARG_STRING, 0, OPT_COMPARE_DEST, 0, 0 },
   {"copy-dest",        0,  POPT_ARG_STRING, 0, OPT_COPY_DEST, 0, 0 },
@@ -442,6 +449,7 @@ static struct poptOption long_options[] = {
   {"no-blocking-io",   0,  POPT_ARG_VAL,    &blocking_io, 0, 0, 0 },
   {0,                 'F', POPT_ARG_NONE,   0, 'F', 0, 0 },
   {0,                 'P', POPT_ARG_NONE,   0, 'P', 0, 0 },
+  {"address",          0,  POPT_ARG_STRING, &bind_address, 0, 0, 0 },
   {"port",             0,  POPT_ARG_INT,    &rsync_port, 0, 0, 0 },
   {"log-format",       0,  POPT_ARG_STRING, &log_format, 0, 0, 0 },
   {"itemize-changes", 'i', POPT_ARG_NONE,   &itemize_changes, 0, 0, 0 },
@@ -450,6 +458,7 @@ static struct poptOption long_options[] = {
   {"hard-links",      'H', POPT_ARG_NONE,   &preserve_hard_links, 0, 0, 0 },
   {"read-batch",       0,  POPT_ARG_STRING, &batch_name, OPT_READ_BATCH, 0, 0 },
   {"write-batch",      0,  POPT_ARG_STRING, &batch_name, OPT_WRITE_BATCH, 0, 0 },
+  {"only-write-batch", 0,  POPT_ARG_STRING, &batch_name, OPT_ONLY_WRITE_BATCH, 0, 0 },
   {"files-from",       0,  POPT_ARG_STRING, &files_from, 0, 0, 0 },
   {"from0",           '0', POPT_ARG_NONE,   &eol_nulls, 0, 0, 0},
   {"no-implied-dirs",  0,  POPT_ARG_VAL,    &implied_dirs, 0, 0, 0 },
@@ -460,7 +469,6 @@ static struct poptOption long_options[] = {
   {"ipv6",            '6', POPT_ARG_VAL,    &default_af_hint, AF_INET6, 0, 0 },
 #endif
   /* All these options switch us into daemon-mode option-parsing. */
-  {"address",          0,  POPT_ARG_STRING, 0, OPT_DAEMON, 0, 0 },
   {"config",           0,  POPT_ARG_STRING, 0, OPT_DAEMON, 0, 0 },
   {"daemon",           0,  POPT_ARG_NONE,   0, OPT_DAEMON, 0, 0 },
   {"detach",           0,  POPT_ARG_NONE,   0, OPT_DAEMON, 0, 0 },
@@ -575,6 +583,8 @@ static void set_refuse_options(char *bp)
 						refused_partial = op->val;
 					else if (wildmatch("progress", op->longName))
 						refused_progress = op->val;
+					else if (wildmatch("inplace", op->longName))
+						refused_inplace = op->val;
 					break;
 				}
 				if (!is_wild)
@@ -617,6 +627,35 @@ static int count_args(const char **argv)
 }
 
 
+static OFF_T parse_size_arg(const char *size_arg)
+{
+	const char *arg;
+	OFF_T size;
+
+	for (arg = size_arg; isdigit(*(uchar*)arg); arg++) {}
+	if (*arg == '.')
+		for (arg++; isdigit(*(uchar*)arg); arg++) {}
+	switch (*arg) {
+	case 'k': case 'K':
+		size = atof(size_arg) * 1024;
+		break;
+	case 'm': case 'M':
+		size = atof(size_arg) * 1024*1024;
+		break;
+	case 'g': case 'G':
+		size = atof(size_arg) * 1024*1024*1024;
+		break;
+	case '\0':
+		size = atof(size_arg);
+		break;
+	default:
+		size = 0;
+		break;
+	}
+	return size;
+}
+
+
 static void create_refuse_error(int which)
 {
 	/* The "which" value is the index + OPT_REFUSED_BASE. */
@@ -791,33 +830,18 @@ int parse_arguments(int *argc, const char ***argv, int frommain)
 			write_batch = 1;
 			break;
 
+		case OPT_ONLY_WRITE_BATCH:
+			/* batch_name is already set */
+			write_batch = -1;
+			break;
+
 		case OPT_READ_BATCH:
 			/* batch_name is already set */
 			read_batch = 1;
 			break;
 
 		case OPT_MAX_SIZE:
-			for (arg = max_size_arg; isdigit(*(uchar*)arg); arg++) {}
-			if (*arg == '.')
-				for (arg++; isdigit(*(uchar*)arg); arg++) {}
-			switch (*arg) {
-			case 'k': case 'K':
-				max_size = atof(max_size_arg) * 1024;
-				break;
-			case 'm': case 'M':
-				max_size = atof(max_size_arg) * 1024*1024;
-				break;
-			case 'g': case 'G':
-				max_size = atof(max_size_arg) * 1024*1024*1024;
-				break;
-			case '\0':
-				max_size = atof(max_size_arg);
-				break;
-			default:
-				max_size = 0;
-				break;
-			}
-			if (max_size <= 0) {
+			if ((max_size = parse_size_arg(max_size_arg)) <= 0) {
 				snprintf(err_buf, sizeof err_buf,
 					"--max-size value is invalid: %s\n",
 					max_size_arg);
@@ -825,11 +849,6 @@ int parse_arguments(int *argc, const char ***argv, int frommain)
 			}
 			break;
 
-		case OPT_TIMEOUT:
-			if (io_timeout && io_timeout < select_timeout)
-				select_timeout = io_timeout;
-			break;
-
 		case OPT_LINK_DEST:
 #ifdef HAVE_LINK
 			link_dest = 1;
@@ -901,7 +920,7 @@ int parse_arguments(int *argc, const char ***argv, int frommain)
 			"--write-batch and --read-batch can not be used together\n");
 		return 0;
 	}
-	if (write_batch || read_batch) {
+	if (write_batch > 0 || read_batch) {
 		if (am_server) {
 			rprintf(FINFO,
 				"ignoring --%s-batch option sent to server\n",
@@ -960,6 +979,8 @@ int parse_arguments(int *argc, const char ***argv, int frommain)
 
 	if (relative_paths < 0)
 		relative_paths = files_from? 1 : 0;
+	if (!relative_paths)
+		implied_dirs = 0;
 
 	if (!!delete_before + delete_during + delete_after > 1) {
 		snprintf(err_buf, sizeof err_buf,
@@ -1093,6 +1114,11 @@ int parse_arguments(int *argc, const char ***argv, int frommain)
 	    && !am_server)
 		verbose = 1;
 
+	if (dry_run)
+		do_xfers = 0;
+
+	set_io_timeout(io_timeout);
+
 	if (verbose && !log_format) {
 		log_format = "%n%L";
 		log_before_transfer = !am_server;
@@ -1108,6 +1134,19 @@ int parse_arguments(int *argc, const char ***argv, int frommain)
 			bwlimit_writemax = 512;
 	}
 
+	if (append_mode) {
+		if (whole_file > 0) {
+			snprintf(err_buf, sizeof err_buf,
+				 "--append cannot be used with --whole-file\n");
+			return 0;
+		}
+		if (refused_inplace) {
+			create_refuse_error(refused_inplace);
+			return 0;
+		}
+		inplace = 1;
+	}
+
 	if (delay_updates && !partial_dir)
 		partial_dir = partialdir_for_delayupdate;
 
@@ -1115,7 +1154,8 @@ int parse_arguments(int *argc, const char ***argv, int frommain)
 #ifdef HAVE_FTRUNCATE
 		if (partial_dir) {
 			snprintf(err_buf, sizeof err_buf,
-				 "--inplace cannot be used with --%s\n",
+				 "--%s cannot be used with --%s\n",
+				 append_mode ? "append" : "inplace",
 				 delay_updates ? "delay-updates" : "partial-dir");
 			return 0;
 		}
@@ -1128,7 +1168,8 @@ int parse_arguments(int *argc, const char ***argv, int frommain)
 		keep_partial = 0;
 #else
 		snprintf(err_buf, sizeof err_buf,
-			 "--inplace is not supported on this %s\n",
+			 "--%s is not supported on this %s\n",
+			 append_mode ? "append" : "inplace",
 			 am_server ? "server" : "client");
 		return 0;
 #endif
@@ -1214,7 +1255,7 @@ int parse_arguments(int *argc, const char ***argv, int frommain)
  **/
 void server_options(char **args,int *argc)
 {
-	static char argstr[50+MAX_BASIS_DIRS*2];
+	static char argstr[64];
 	int ac = *argc;
 	char *arg;
 
@@ -1245,7 +1286,7 @@ void server_options(char **args,int *argc)
 		argstr[x++] = 'b';
 	if (update_only)
 		argstr[x++] = 'u';
-	if (dry_run)
+	if (!do_xfers) /* NOT "dry_run"! */
 		argstr[x++] = 'n';
 	if (preserve_links)
 		argstr[x++] = 'l';
@@ -1373,6 +1414,8 @@ void server_options(char **args,int *argc)
 			args[ac++] = "--delete-after";
 		if (force_delete)
 			args[ac++] = "--force";
+		if (write_batch < 0)
+			args[ac++] = "--only-write-batch=X";
 	}
 
 	if (size_only)
@@ -1418,7 +1461,9 @@ void server_options(char **args,int *argc)
 	if (opt_ignore_existing && am_sender)
 		args[ac++] = "--ignore-existing";
 
-	if (inplace)
+	if (append_mode)
+		args[ac++] = "--append";
+	else if (inplace)
 		args[ac++] = "--inplace";
 
 	if (tmpdir) {
@@ -1451,7 +1496,7 @@ void server_options(char **args,int *argc)
 		if (!relative_paths)
 			args[ac++] = "--no-relative";
 	}
-	if (!implied_dirs && !am_sender)
+	if (relative_paths && !implied_dirs && !am_sender)
 		args[ac++] = "--no-implied-dirs";
 
 	if (fuzzy_basis && am_sender)

packaging/lsb/rsync.spec

@@ -1,6 +1,6 @@
 Summary: A program for synchronizing files over a network.
 Name: rsync
-Version: 2.6.4
+Version: 2.6.6
 Release: 1
 Group: Applications/Internet
 Source:	ftp://rsync.samba.org/pub/rsync/rsync-%{version}.tar.gz

pipe.c

@@ -25,7 +25,6 @@ extern int am_sender;
 extern int am_server;
 extern int blocking_io;
 extern int orig_umask;
-extern int write_batch;
 extern int filesfrom_fd;
 
 /**
@@ -128,10 +127,6 @@ pid_t local_child(int argc, char **argv, int *f_in, int *f_out,
 		am_sender = !am_sender;
 		am_server = 1;
 
-		/* The server side never writes the batch, even if it
-		 * is local (it makes the logic easier elsewhere). */
-		write_batch = 0;
-
 		if (!am_sender)
 			filesfrom_fd = -1;
 

receiver.c

@@ -21,7 +21,7 @@
 #include "rsync.h"
 
 extern int verbose;
-extern int dry_run;
+extern int do_xfers;
 extern int am_daemon;
 extern int am_server;
 extern int do_progress;
@@ -30,6 +30,7 @@ extern int log_format_has_i;
 extern int daemon_log_format_has_i;
 extern int csum_length;
 extern int read_batch;
+extern int write_batch;
 extern int batch_gen_fd;
 extern int protocol_version;
 extern int relative_paths;
@@ -44,6 +45,7 @@ extern int remove_sent_files;
 extern int module_id;
 extern int ignore_errors;
 extern int orig_umask;
+extern int append_mode;
 extern int keep_partial;
 extern int checksum_seed;
 extern int inplace;
@@ -211,6 +213,28 @@ static int receive_data(int f_in, char *fname_r, int fd_r, OFF_T size_r,
 
 	sum_init(checksum_seed);
 
+	if (append_mode) {
+		OFF_T j;
+		sum.flength = (OFF_T)sum.count * sum.blength;
+		if (sum.remainder)
+			sum.flength -= sum.blength - sum.remainder;
+		for (j = CHUNK_SIZE; j < sum.flength; j += CHUNK_SIZE) {
+			sum_update(map_ptr(mapbuf, offset, CHUNK_SIZE),
+				   CHUNK_SIZE);
+			offset = j;
+		}
+		if (offset < sum.flength) {
+			int32 len = sum.flength - offset;
+			sum_update(map_ptr(mapbuf, offset, len), len);
+			offset = sum.flength;
+		}
+		if (fd != -1 && do_lseek(fd, offset, SEEK_SET) != offset) {
+			rsyserr(FERROR, errno, "lseek failed on %s",
+				full_fname(fname));
+			exit_cleanup(RERR_FILEIO);
+		}
+	}
+
 	while ((i = recv_token(f_in, &data)) != 0) {
 		if (do_progress)
 			show_progress(offset, total_size);
@@ -416,6 +440,7 @@ int recv_files(int f_in, struct file_list *flist, char *local_name)
 			send_msg(MSG_DONE, "", 0);
 			if (keep_partial && !partial_dir)
 				make_backups = 0; /* prevents double backup */
+			append_mode = 0;
 			continue;
 		}
 
@@ -452,13 +477,19 @@ int recv_files(int f_in, struct file_list *flist, char *local_name)
 			exit_cleanup(RERR_PROTOCOL);
 		}
 
-		if (dry_run) { /* log the transfer */
+		if (!do_xfers) { /* log the transfer */
 			if (!am_server && log_format)
 				log_item(file, &stats, iflags, NULL);
 			if (read_batch)
 				discard_receive_data(f_in, file->length);
 			continue;
 		}
+		if (write_batch < 0) {
+			log_item(file, &stats, iflags, NULL);
+			if (!am_server)
+				discard_receive_data(f_in, file->length);
+			continue;
+		}
 
 		if (read_batch) {
 			next_gen_i = get_next_gen_i(batch_gen_fd, next_gen_i, i);

rsync.c

@@ -68,17 +68,18 @@ int set_perms(char *fname,struct file_struct *file,STRUCT_STAT *st,
 		st = &st2;
 	}
 
-	if (!preserve_times || S_ISLNK(st->st_mode)
-	 || (S_ISDIR(st->st_mode) && omit_dir_times))
+	if (!preserve_times || (S_ISDIR(st->st_mode) && omit_dir_times))
 		flags |= PERMS_SKIP_MTIME;
 	if (!(flags & PERMS_SKIP_MTIME)
 	    && cmp_modtime(st->st_mtime, file->modtime) != 0) {
-		if (set_modtime(fname,file->modtime) != 0) {
+		int ret = set_modtime(fname, file->modtime, st->st_mode);
+		if (ret < 0) {
 			rsyserr(FERROR, errno, "failed to set times on %s",
 				full_fname(fname));
 			return 0;
 		}
-		updated = 1;
+		if (ret == 0) /* ret == 1 if symlink could not be set */
+			updated = 1;
 	}
 
 	change_uid = am_root && preserve_uid && st->st_uid != file->uid;
@@ -125,15 +126,16 @@ int set_perms(char *fname,struct file_struct *file,STRUCT_STAT *st,
 	}
 
 #ifdef HAVE_CHMOD
-	if (!S_ISLNK(st->st_mode)) {
-		if ((st->st_mode & CHMOD_BITS) != (file->mode & CHMOD_BITS)) {
-			updated = 1;
-			if (do_chmod(fname,(file->mode & CHMOD_BITS)) != 0) {
-				rsyserr(FERROR, errno, "failed to set permissions on %s",
-					full_fname(fname));
-				return 0;
-			}
+	if ((st->st_mode & CHMOD_BITS) != (file->mode & CHMOD_BITS)) {
+		int ret = do_chmod(fname, file->mode);
+		if (ret < 0) {
+			rsyserr(FERROR, errno,
+				"failed to set permissions on %s",
+				full_fname(fname));
+			return 0;
 		}
+		if (ret == 0) /* ret == 1 if symlink could not be set */
+			updated = 1;
 	}
 #endif
 

rsync.h

@@ -103,8 +103,8 @@
 #define IOERR_DEL_LIMIT (1<<2)
 
 #define MAX_ARGS 1000
-
 #define MAX_BASIS_DIRS 20
+#define MAX_SERVER_ARGS (MAX_BASIS_DIRS*2 + 100)
 
 #define MPLEX_BASE 7
 
@@ -139,7 +139,6 @@
 #define DEL_TERSE		(1<<3)
 
 /* For use by the itemize_changes code */
-#define ITEM_DUMMY_BIT (1<<0)
 #define ITEM_REPORT_CHECKSUM (1<<1)
 #define ITEM_REPORT_SIZE (1<<2)
 #define ITEM_REPORT_TIME (1<<3)
@@ -675,8 +674,12 @@ extern char *sys_errlist[];
 extern int errno;
 #endif
 
-#define SUPPORT_LINKS HAVE_READLINK
-#define SUPPORT_HARD_LINKS HAVE_LINK
+#ifdef HAVE_READLINK
+#define SUPPORT_LINKS 1
+#endif
+#ifdef HAVE_LINK
+#define SUPPORT_HARD_LINKS 1
+#endif
 
 #define SIGNAL_CAST (RETSIGTYPE (*)())
 

rsync.yo

@@ -1,11 +1,11 @@
 mailto(rsync-bugs@samba.org)
-manpage(rsync)(1)(30 Mar 2005)()()
+manpage(rsync)(1)(28 Jul 2005)()()
 manpagename(rsync)(faster, flexible replacement for rcp)
 manpagesynopsis()
 
 rsync [OPTION]... SRC [SRC]... [USER@]HOST:DEST
 
-rsync [OPTION]... [USER@]HOST:SRC DEST
+rsync [OPTION]... [USER@]HOST:SRC [DEST]
 
 rsync [OPTION]... SRC [SRC]... DEST
 
@@ -38,47 +38,30 @@ itemize(
   it() can use any transparent remote shell, including ssh or rsh
   it() does not require root privileges
   it() pipelining of file transfers to minimize latency costs
-  it() support for anonymous or authenticated rsync servers (ideal for
+  it() support for anonymous or authenticated rsync daemons (ideal for
        mirroring)
 )
 
 manpagesection(GENERAL)
 
-There are eight different ways of using rsync. They are:
+Rsync copies files either to or from a remote host, or locally on the
+current host (it does not support copying files between two remote hosts).
 
-itemize(
-	it() for copying local files. This is invoked when neither
-	     source nor destination path contains a : separator
-	it() for copying from the local machine to a remote machine using
-	a remote shell program as the transport (such as ssh or
-	rsh). This is invoked when the destination path contains a
-	single : separator.
-	it() for copying from a remote machine to the local machine
-	using a remote shell program. This is invoked when the source
-	contains a : separator.
-	it() for copying from a remote rsync server to the local
-	machine. This is invoked when the source path contains a ::
-	separator or an rsync:// URL.
-	it() for copying from the local machine to a remote rsync
-	server. This is invoked when the destination path contains a ::
-	separator or an rsync:// URL.
-	it() for copying from a remote machine using a remote shell
-	program as the transport, using rsync server on the remote
-	machine.  This is invoked when the source path contains a ::
-	separator and the bf(--rsh=COMMAND) (aka "bf(-e COMMAND)") option is
-	also provided.
-	it() for copying from the local machine to a remote machine
-	using a remote shell program as the transport, using rsync
-	server on the remote machine.  This is invoked when the
-	destination path contains a :: separator and the
-	bf(--rsh=COMMAND) option is also provided.
-	it() for listing files on a remote machine. This is done the
-	same way as rsync transfers except that you leave off the
-	local destination.
-)
+There are two different ways for rsync to contact a remote system: using a
+remote-shell program as the transport (such as ssh or rsh) or contacting an
+rsync daemon directly via TCP.  The remote-shell transport is used whenever
+the source or destination path contains a single colon (:) separator after
+a host specification.  Contacting an rsync daemon directly happens when the
+source or destination path contains a double colon (::) separator after a
+host specification, OR when an rsync:// URL is specified (see also the
+"USING RSYNC-DAEMON FEATURES VIA A REMOTE-SHELL CONNECTION" section for
+an exception to this latter rule).
 
-Note that in all cases (other than listing) at least one of the source
-and destination paths must be local.
+As a special case, if a remote source is specified without a destination,
+the remote files are listed in an output format similar to "ls -l".
+
+As expected, if neither the source or destination path specify a remote
+host, the copy occurs locally (see also the bf(--list-only) option).
 
 manpagesection(SETUP)
 
@@ -139,6 +122,15 @@ tt(rsync -av /src/foo /dest)nl()
 tt(rsync -av /src/foo/ /dest/foo)nl()
 )
 
+Note also that host and module references don't require a trailing slash to
+copy the contents of the default directory.  For example, both of these
+copy the remote directory's contents into "/dest":
+
+quote(
+tt(rsync -av host: /dest)nl()
+tt(rsync -av host::module /dest)nl()
+)
+
 You can also use rsync in local-only mode, where both the source and
 destination don't have a ':' in the name. In this case it behaves like
 an improved copy command.
@@ -178,16 +170,13 @@ tt(rsync -av host:file?name?with?spaces /dest)nl()
 This latter example assumes that your shell passes through unmatched
 wildcards.  If it complains about "no match", put the name in quotes.
 
-manpagesection(CONNECTING TO AN RSYNC SERVER)
+manpagesection(CONNECTING TO AN RSYNC DAEMON)
 
-It is also possible to use rsync without a remote shell as the
-transport. In this case you will connect to a remote rsync server
-running on TCP port 873.
-
-You may establish the connection via a web proxy by setting the
-environment variable RSYNC_PROXY to a hostname:port pair pointing to
-your web proxy.  Note that your web proxy's configuration must support
-proxy connections to port 873.
+It is also possible to use rsync without a remote shell as the transport.
+In this case you will directly connect to a remote rsync daemon, typically
+using TCP port 873.  (This obviously requires the daemon to be running on
+the remote system, so refer to the STARTING AN RSYNC DAEMON TO ACCEPT
+CONNECTIONS section below for information on that.)
 
 Using rsync in this way is the same as using it with a remote shell except
 that:
@@ -195,15 +184,20 @@ that:
 itemize(
 	it() you either use a double colon :: instead of a single colon to
 	separate the hostname from the path, or you use an rsync:// URL.
-	it() the remote server may print a message of the day when you
+	it() the first word after the :: is a module name.
+	it() the remote daemon may print a message of the day when you
 	connect.
-	it() if you specify no path name on the remote server then the
-	list of accessible paths on the server will be shown.
+	it() if you specify no path name on the remote daemon then the
+	list of accessible paths on the daemon will be shown.
 	it() if you specify no local destination then a listing of the
-	specified files on the remote server is provided.
+	specified files on the remote daemon is provided.
 )
 
-Some paths on the remote server may require authentication. If so then
+An example that copies all the files in a remote module named "src":
+
+verb(    rsync -av host::src /dest)
+
+Some modules on the remote daemon may require authentication. If so,
 you will receive a password prompt when you connect. You can avoid the
 password prompt by setting the environment variable RSYNC_PASSWORD to
 the password you want to use or using the bf(--password-file) option. This
@@ -212,52 +206,57 @@ may be useful when scripting rsync.
 WARNING: On some systems environment variables are visible to all
 users. On those systems using bf(--password-file) is recommended.
 
-manpagesection(CONNECTING TO AN RSYNC SERVER OVER A REMOTE SHELL PROGRAM)
+You may establish the connection via a web proxy by setting the
+environment variable RSYNC_PROXY to a hostname:port pair pointing to
+your web proxy.  Note that your web proxy's configuration must support
+proxy connections to port 873.
 
-It is sometimes useful to be able to set up file transfers using rsync
-server capabilities on the remote machine, while still using ssh or
-rsh for transport.  This is especially useful when you want to connect
-to a remote machine via ssh (for encryption or to get through a
-firewall), but you still want to have access to the rsync server
-features (see RUNNING AN RSYNC SERVER OVER A REMOTE SHELL PROGRAM,
-below).
+manpagesection(USING RSYNC-DAEMON FEATURES VIA A REMOTE-SHELL CONNECTION)
 
-From the user's perspective, using rsync in this way is the same as
-using it to connect to an rsync server, except that you must
-explicitly set the remote shell program on the command line with
-bf(--rsh=COMMAND).  (Setting RSYNC_RSH in the environment will not turn on
-this functionality.)
+It is sometimes useful to use various features of an rsync daemon (such as
+named modules) without actually allowing any new socket connections into a
+system (other than what is already required to allow remote-shell access).
+Rsync supports connecting to a host using a remote shell and then spawning
+a single-use "daemon" server that expects to read its config file in the
+home dir of the remote user.  This can be useful if you want to encrypt a
+daemon-style transfer's data, but since the daemon is started up fresh by
+the remote user, you may not be able to use features such as chroot or
+change the uid used by the daemon.  (For another way to encrypt a daemon
+transfer, consider using ssh to tunnel a local port to a remote machine and
+configure a normal rsync daemon on that remote host to only allow
+connections from "localhost".)
 
-In order to distinguish between the remote-shell user and the rsync
-server user, you can use '-l user' on your remote-shell command:
+From the user's perspective, a daemon transfer via a remote-shell
+connection uses nearly the same command-line syntax as a normal
+rsync-daemon transfer, with the only exception being that you must
+explicitly set the remote shell program on the command-line with the
+bf(--rsh=COMMAND) option.  (Setting the RSYNC_RSH in the environment
+will not turn on this functionality.)  For example:
 
-verb(    rsync -av --rsh="ssh -l ssh-user" \ 
-        rsync-user@host::module[/path] local-path)
+verb(    rsync -av --rsh=ssh host::module /dest)
+
+If you need to specify a different remote-shell user, keep in mind that the
+user@ prefix in front of the host is specifying the rsync-user value (for a
+module that requires user-based authentication).  This means that you must
+give the '-l user' option to ssh when specifying the remote-shell:
+
+verb(    rsync -av -e "ssh -l ssh-user" rsync-user@host::module /dest)
 
 The "ssh-user" will be used at the ssh level; the "rsync-user" will be
-used to check against the rsyncd.conf on the remote host.
+used to log-in to the "module".
 
-manpagesection(RUNNING AN RSYNC SERVER)
+manpagesection(STARTING AN RSYNC DAEMON TO ACCEPT CONNECTIONS)
 
-An rsync server is configured using a configuration file.  Please see the
-rsyncd.conf(5) man page for more information.  By default the configuration
-file is called /etc/rsyncd.conf, unless rsync is running over a remote
-shell program and is not running as root; in that case, the default name
-is rsyncd.conf in the current directory on the remote computer
-(typically $HOME).
+In order to connect to an rsync daemon, the remote system needs to have a
+daemon already running (or it needs to have configured something like inetd
+to spawn an rsync daemon for incoming connections on a particular port).
+For full information on how to start a daemon that will handling incoming
+socket connections, see the rsyncd.conf(5) man page -- that is the config
+file for the daemon, and it contains the full details for how to run the
+daemon (including stand-alone and inetd configurations).
 
-manpagesection(RUNNING AN RSYNC SERVER OVER A REMOTE SHELL PROGRAM)
-
-See the rsyncd.conf(5) man page for full information on the rsync
-server configuration file.
-
-Several configuration options will not be available unless the remote
-user is root (e.g. chroot, setuid/setgid, etc.).  There is no need to
-configure inetd or the services map to include the rsync server port
-if you run an rsync server only via a remote shell program.
-
-To run an rsync server out of a single-use ssh key, see this section
-in the rsyncd.conf(5) man page.
+If you're using one of the remote-shell transports for the transfer, there is
+no need to manually start an rsync daemon.
 
 manpagesection(EXAMPLES)
 
@@ -365,8 +364,8 @@ to the detailed description below for a complete description.  verb(
      --include=PATTERN       don't exclude files matching PATTERN
      --include-from=FILE     read include patterns from FILE
      --files-from=FILE       read list of source-file names from FILE
- -0, --from0                 all *from file lists are delimited by nulls
-     --version               print version number
+ -0, --from0                 all *from/filter files are delimited by 0s
+     --address=ADDRESS       bind address for outgoing socket to daemon
      --port=PORT             specify double-colon alternate port number
      --blocking-io           use blocking I/O for the remote shell
      --no-blocking-io        turn off blocking I/O when it is default
@@ -374,16 +373,18 @@ to the detailed description below for a complete description.  verb(
      --progress              show progress during transfer
  -P                          same as --partial --progress
  -i, --itemize-changes       output a change-summary for all updates
-     --log-format=FORMAT     log file-transfers using specified format
+     --log-format=FORMAT     output filenames using the specified format
      --password-file=FILE    read password from FILE
      --list-only             list the files instead of copying them
      --bwlimit=KBPS          limit I/O bandwidth; KBytes per second
      --write-batch=FILE      write a batched update to FILE
+     --only-write-batch=FILE like --write-batch but w/o updating dest
      --read-batch=FILE       read a batched update from FILE
      --protocol=NUM          force an older protocol version to be used
      --checksum-seed=NUM     set block/file checksum seed (advanced)
  -4, --ipv4                  prefer IPv4
  -6, --ipv6                  prefer IPv6
+     --version               print version number
  -h, --help                  show this help screen)
 
 Rsync can also be run as a daemon, in which case the following options are
@@ -423,7 +424,7 @@ you are debugging rsync.
 
 Note that the names of the transferred files that are output are done using
 a default bf(--log-format) of "%n%L", which tells you just the name of the
-file and, if the item is a symlink, where it points.  At the single bf(-v)
+file and, if the item is a link, where it points.  At the single bf(-v)
 level of verbosity, this does not mention when a file gets its attributes
 changed.  If you ask for an itemized list of changed attributes (either
 bf(--itemize-changes) or adding "%i" to the bf(--log-format) setting), the
@@ -620,9 +621,10 @@ default.
 dit(bf(-p, --perms)) This option causes rsync to set the destination
 permissions to be the same as the source permissions.
 
-Without this option, each new file gets its permissions set based on the
-source file's permissions and the umask at the receiving end, while all
-other files (including updated files) retain their existing permissions
+Without this option, all existing files (including updated files) retain
+their existing permissions, while each new file gets its permissions set
+based on the source file's permissions, but masked by the receiving end's
+umask setting
 (which is the same behavior as other file-copy utilities, such as cp).
 
 dit(bf(-o, --owner)) This option causes rsync to set the owner of the
@@ -769,11 +771,11 @@ remote copies of rsync. Typically, rsync is configured to use ssh by
 default, but you may prefer to use rsh on a local network.
 
 If this option is used with bf([user@]host::module/path), then the
-remote shell em(COMMAND) will be used to run an rsync server on the
+remote shell em(COMMAND) will be used to run an rsync daemon on the
 remote host, and all data will be transmitted through that remote
 shell connection, rather than through a direct socket connection to a
-running rsync server on the remote host.  See the section "CONNECTING
-TO AN RSYNC SERVER OVER A REMOTE SHELL PROGRAM" above.
+running rsync daemon on the remote host.  See the section "USING
+RSYNC-DAEMON FEATURES VIA A REMOTE-SHELL CONNECTION" above.
 
 Command-line arguments are permitted in COMMAND provided that COMMAND is
 presented to rsync as a single argument.  For example:
@@ -905,9 +907,14 @@ command:
 quote(tt(   rsync -a --files-from=/tmp/foo /usr remote:/backup))
 
 If /tmp/foo contains the string "bin" (or even "/bin"), the /usr/bin
-directory will be created as /backup/bin on the remote host (but the
-contents of the /usr/bin dir would not be sent unless you specified bf(-r)
-or the names were explicitly listed in /tmp/foo).  Also keep in mind
+directory will be created as /backup/bin on the remote host.  If it
+contains "bin/" (note the trailing slash), the immediate contents of
+the directory would also be sent (without needing to be explicitly
+mentioned in the file -- this began in version 2.6.4).  In both cases,
+if the bf(-r) option was enabled, that dir's entire hierarchy would
+also be transferred (keep in mind that bf(-r) needs to be specified
+explicitly with bf(--files-from), since it is not implied by bf(-a)).
+Also note
 that the effect of the (enabled by default) bf(--relative) option is to
 duplicate only the path info that is read from the file -- it does not
 force the duplication of the source-spec path (/usr in this case).
@@ -923,7 +930,7 @@ quote(tt(   rsync -a --files-from=:/path/file-list src:/ /tmp/copy))
 This would copy all the files specified in the /path/file-list file that
 was located on the remote "src" host.
 
-dit(bf(-0, --from0)) This tells rsync that the filenames it reads from a
+dit(bf(-0, --from0)) This tells rsync that the rules/filenames it reads from a
 file are terminated by a null ('\0') character, not a NL, CR, or CR+LF.
 This affects bf(--exclude-from), bf(--include-from), bf(--files-from), and any
 merged files specified in a bf(--filter) rule.
@@ -1032,6 +1039,11 @@ dit(bf(--timeout=TIMEOUT)) This option allows you to set a maximum I/O
 timeout in seconds. If no data is transferred for the specified time
 then rsync will exit. The default is 0, which means no timeout.
 
+dit(bf(--address)) By default rsync will bind to the wildcard address when
+connecting to an rsync daemon.  The bf(--address) option allows you to
+specify a specific IP address (or hostname) to bind to.  See also this
+option in the bf(--daemon) mode section.
+
 dit(bf(--port=PORT)) This specifies an alternate TCP port number to use
 rather than the default of 873.  This is only needed if you are using the
 double-colon (::) syntax to connect with an rsync daemon (since the URL
@@ -1064,7 +1076,7 @@ quote(itemize(
   (sent).
   it() A bf(>) means that a file is being transferred to the local host
   (received).
-  it() A bf(c) means that a local change/creation is occuring for the item
+  it() A bf(c) means that a local change/creation is occurring for the item
   (such as the creation of a directory or the changing of a symlink, etc.).
   it() A bf(h) means that the item is a hard-link to another item (requires
   bf(--hard-links)).
@@ -1080,26 +1092,26 @@ will be output if the associated attribute for the item is being updated or
 a "." for no change.  Three exceptions to this are: (1) a newly created
 item replaces each letter with a "+", (2) an identical item replaces the
 dots with spaces, and (3) an unknown attribute replaces each letter with
-a "?" (this happens when talking to an older rsync).
+a "?" (this can happen when talking to an older rsync).
 
 The attribute that is associated with each letter is as follows:
 
 quote(itemize(
   it() A bf(c) means the checksum of the file is different and will be
-  updated by the file transfer (requries bf(--checksum)).
+  updated by the file transfer (requires bf(--checksum)).
   it() A bf(s) means the size of the file is different and will be updated
   by the file transfer.
   it() A bf(t) means the modification time is different and is being updated
-  to the server's value (requires bf(--times)).  An alternate value of bf(T)
+  to the sender's value (requires bf(--times)).  An alternate value of bf(T)
   means that the time will be set to the transfer time, which happens
   anytime a symlink is transferred, or when a file or device is transferred
   without bf(--times).
   it() A bf(p) means the permissions are different and are being updated to
-  the server's value (requires bf(--perms)).
+  the sender's value (requires bf(--perms)).
   it() An bf(o) means the owner is different and is being updated to the
-  server's value (requires bf(--owner) and root privileges).
+  sender's value (requires bf(--owner) and root privileges).
   it() A bf(g) means the group is different and is being updated to the
-  server's value (requires bf(--group) and the authority to set the group).
+  sender's value (requires bf(--group) and the authority to set the group).
   it() The bf(a) is reserved for a future enhanced version that supports
   extended file attributes, such as ACLs.
 ))
@@ -1120,7 +1132,7 @@ Specifying this option will mention each file, dir, etc. that gets updated
 in a significant way (a transferred file, a recreated symlink/device, or a
 touched directory) unless the itemized-changes escape (%i) is included in
 the string, in which case the logging of names increases to mention any
-item that is updated in any way (as long as the receiving side is version
+item that is changed in any way (as long as the receiving side is at least
 2.6.4).  See the bf(--itemized-changes) option for a description of the
 output of "%i".
 
@@ -1188,7 +1200,7 @@ option does not look for this environment value is (1) when bf(--inplace) was
 specified (since bf(--inplace) conflicts with bf(--partial-dir)), or (2) when
 bf(--delay-updates) was specified (see below).
 
-For the purposes of the server-config's "refuse options" setting,
+For the purposes of the daemon-config's "refuse options" setting,
 bf(--partial-dir) does em(not) imply bf(--partial).  This is so that a
 refusal of the bf(--partial) option can be used to disallow the overwriting
 of destination files with a partial transfer, while still allowing the
@@ -1202,7 +1214,7 @@ atomic.  By default the files are placed into a directory named ".~tmp~" in
 each file's destination directory, but you can override this by specifying
 the bf(--partial-dir) option.  (Note that RSYNC_PARTIAL_DIR has no effect
 on this value, nor is bf(--partial-dir) considered to be implied for the
-purposes of the server-config's "refuse options" setting.)
+purposes of the daemon-config's "refuse options" setting.)
 Conflicts with bf(--inplace).
 
 This option uses more memory on the receiving side (one bit per file
@@ -1246,8 +1258,8 @@ purpose is to make it much easier to specify these two options for a long
 transfer that may be interrupted.
 
 dit(bf(--password-file)) This option allows you to provide a password
-in a file for accessing a remote rsync server. Note that this option
-is only useful when accessing an rsync server using the built in
+in a file for accessing a remote rsync daemon. Note that this option
+is only useful when accessing an rsync daemon using the built in
 transport, not when using a remote shell as the transport. The file
 must not be world readable. It should contain just the password as a
 single line.
@@ -1255,9 +1267,11 @@ single line.
 dit(bf(--list-only)) This option will cause the source files to be listed
 instead of transferred.  This option is inferred if there is no destination
 specified, so you don't usually need to use it explicitly.  However, it can
-come in handy for a power user that wants to avoid the "bf(-r --exclude='/*/*')"
+come in handy for a user that wants to avoid the "bf(-r --exclude='/*/*')"
 options that rsync might use as a compatibility kluge when generating a
-non-recursive listing.
+non-recursive listing, or to list the files that are involved in a local
+copy (since the destination path is not optional for a local copy, you
+must specify this option explicitly and still include a destination).
 
 dit(bf(--bwlimit=KBPS)) This option allows you to specify a maximum
 transfer rate in kilobytes per second. This option is most effective when
@@ -1269,7 +1283,24 @@ of zero specifies no limit.
 
 dit(bf(--write-batch=FILE)) Record a file that can later be applied to
 another identical destination with bf(--read-batch). See the "BATCH MODE"
-section for details.
+section for details, and also the bf(--only-write-batch) option.
+
+dit(bf(--only-write-batch=FILE)) Works like bf(--write-batch), except that
+no updates are made on the destination system when creating the batch.
+This lets you transport the changes to the destination system via some
+other means and then apply the changes via bf(--read-batch).
+
+Note that you can feel free to write the batch directly to some portable
+media: if this media fills to capacity before the end of the transfer, you
+can just apply that partial transfer to the destination and repeat the
+whole process to get the rest of the changes (as long as you don't mind a
+partially updated destination system while the multi-update cycle is
+happening).
+
+Also note that you only save bandwidth when pushing changes to a remote
+system because this allows the batched data to be diverted from the sender
+into the batch file without having to flow over the wire to the receiver
+(when pulling, the sender is remote, and thus can't write the batch).
 
 dit(bf(--read-batch=FILE)) Apply all of the changes stored in FILE, a
 file previously generated by bf(--write-batch).
@@ -1280,9 +1311,9 @@ dit(bf(--protocol=NUM)) Force an older protocol version to be used.  This
 is useful for creating a batch file that is compatible with an older
 version of rsync.  For instance, if rsync 2.6.4 is being used with the
 bf(--write-batch) option, but rsync 2.6.3 is what will be used to run the
-bf(--read-batch) option, you should use "--protocol=28" (when creating the
-batch file) to force the older protocol version to be used in the batch
-file (assuming you can't upgrade the rsync on the reading system to 2.6.4).
+bf(--read-batch) option, you should use "--protocol=28" when creating the
+batch file to force the older protocol version to be used in the batch
+file (assuming you can't upgrade the rsync on the reading system).
 
 dit(bf(-4, --ipv4) or bf(-6, --ipv6)) Tells rsync to prefer IPv4/IPv6
 when creating sockets.  This only affects sockets that rsync has direct
@@ -1316,12 +1347,11 @@ become a background daemon.  The daemon will read the config file
 requests accordingly.  See the rsyncd.conf(5) man page for more
 details.
 
-dit(bf(--address)) By default rsync will bind to the wildcard address
-when run as a daemon with the bf(--daemon) option or when connecting to a
-rsync server. The bf(--address) option allows you to specify a specific IP
-address (or hostname) to bind to. This makes virtual hosting possible
-in conjunction with the bf(--config) option.  See also the "address" global
-option in the rsyncd.conf manpage.
+dit(bf(--address)) By default rsync will bind to the wildcard address when
+run as a daemon with the bf(--daemon) option.  The bf(--address) option
+allows you to specify a specific IP address (or hostname) to bind to.  This
+makes virtual hosting possible in conjunction with the bf(--config) option.
+See also the "address" global option in the rsyncd.conf manpage.
 
 dit(bf(--bwlimit=KBPS)) This option allows you to specify a maximum
 transfer rate in kilobytes per second for the data the daemon sends.
@@ -1567,7 +1597,7 @@ itemize(
   default to having that modifier set.  For instance, "merge,-/ .excl" would
   treat the contents of .excl as absolute-path excludes,
   while "dir-merge,s .filt" and ":sC" would each make all their
-  per-directory rules apply only on the server side.
+  per-directory rules apply only on the sending side.
 )
 
 The following modifiers are accepted after a "+" or "-":
@@ -1588,7 +1618,7 @@ itemize(
   being transferred.  The default is for a rule to affect both sides
   unless bf(--delete-excluded) was specified, in which case default rules
   become sender-side only.  See also the hide (H) and show (S) rules,
-  which are an alternate way to specify server-side includes/excludes.
+  which are an alternate way to specify sending-side includes/excludes.
   it() An bf(r) is used to indicate that the rule applies to the receiving
   side.  When a rule affects the receiving side, it prevents files from
   being deleted.  See the bf(s) modifier for more info.  See also the
@@ -1922,12 +1952,31 @@ ensure the rsync module they copy does not include symbolic links to
 bf(/etc/passwd) in the public section of the site.  Using
 bf(--copy-unsafe-links) will cause any links to be copied as the file
 they point to on the destination.  Using bf(--safe-links) will cause
-unsafe links to be omitted altogether.
+unsafe links to be omitted altogether.  (Note that you must specify
+bf(--links) for bf(--safe-links) to have any effect.)
 
 Symbolic links are considered unsafe if they are absolute symlinks
 (start with bf(/)), empty, or if they contain enough bf("..")
 components to ascend from the directory being copied.
 
+Here's a summary of how the symlink options are interpreted.  The list is
+in order of precedence, so if your combination of options isn't mentioned,
+use the first line that is a complete subset of your options:
+
+dit(bf(--copy-links)) Turn all symlinks into normal files (leaving no
+symlinks for any other options to affect).
+
+dit(bf(--links --copy-unsafe-links)) Turn all unsafe symlinks into files
+and duplicate all safe symlinks.
+
+dit(bf(--copy-unsafe-links)) Turn all unsafe symlinks into files, noisily
+skip all safe symlinks.
+
+dit(bf(--links --safe-links))  Duplicate safe symlinks and skip unsafe
+ones.
+
+dit(bf(--links)) Duplicate all symlinks.
+
 manpagediagnostics()
 
 rsync occasionally produces error messages that may seem a little
@@ -1997,7 +2046,7 @@ password allows you to run authenticated rsync connections to an rsync
 daemon without user intervention. Note that this does not supply a
 password to a shell transport such as ssh.
 dit(bf(USER) or bf(LOGNAME)) The USER or LOGNAME environment variables
-are used to determine the default username sent to an rsync server.
+are used to determine the default username sent to an rsync daemon.
 If neither is set, the username defaults to "nobody".
 dit(bf(HOME)) The HOME environment variable is used to find the user's
 default .cvsignore file.
@@ -2027,6 +2076,10 @@ see also the comments on the bf(--delete) option
 Please report bugs! See the website at
 url(http://rsync.samba.org/)(http://rsync.samba.org/)
 
+manpagesection(VERSION)
+
+This man page is current for version 2.6.6 of rsync.
+
 manpagesection(CREDITS)
 
 rsync is distributed under the GNU public license.  See the file

rsyncd.conf.yo

@@ -1,6 +1,6 @@
 mailto(rsync-bugs@samba.org)
-manpage(rsyncd.conf)(5)(30 Mar 2005)()()
-manpagename(rsyncd.conf)(configuration file for rsync server)
+manpage(rsyncd.conf)(5)(28 Jul 2005)()()
+manpagename(rsyncd.conf)(configuration file for rsync in daemon mode)
 manpagesynopsis()
 
 rsyncd.conf
@@ -8,7 +8,7 @@ rsyncd.conf
 manpagedescription()
 
 The rsyncd.conf file is the runtime configuration file for rsync when
-run as an rsync server. 
+run as an rsync daemon. 
 
 The rsyncd.conf file controls authentication, access, logging and
 available modules.
@@ -52,9 +52,6 @@ write the appropriate data, log, and lock files.
 You can launch it either via inetd, as a stand-alone daemon, or from
 an rsync client via a remote shell.  If run as a stand-alone daemon then
 just run the command "bf(rsync --daemon)" from a suitable startup script.
-If run from an rsync client via a remote shell (by specifying both the
-bf(--rsh) (bf(-e)) option and server mode with "::" or "rsync://"), the bf(--daemon)
-option is automatically passed to the remote side.
 
 When run via inetd you should add a line like this to /etc/services:
 
@@ -68,7 +65,7 @@ Replace "/usr/bin/rsync" with the path to where you have rsync installed on
 your system.  You will then need to send inetd a HUP signal to tell it to
 reread its config file.
 
-Note that you should not send the rsync server a HUP signal to force
+Note that you should bf(not) send the rsync daemon a HUP signal to force
 it to reread the tt(rsyncd.conf) file. The file is re-read on each client
 connection. 
 
@@ -90,19 +87,30 @@ is no motd file.
 dit(bf(log file)) The "log file" option tells the rsync daemon to log
 messages to that file rather than using syslog. This is particularly
 useful on systems (such as AIX) where syslog() doesn't work for
-chrooted programs.
+chrooted programs.  If the daemon fails to open to specified file, it
+will fall back to using syslog and output an error about the failure.
+(Note that a failure to open the specified log file used to be a fatal
+error.)
 
 dit(bf(pid file)) The "pid file" option tells the rsync daemon to write
 its process ID to that file.
 
 dit(bf(syslog facility)) The "syslog facility" option allows you to
 specify the syslog facility name to use when logging messages from the
-rsync server. You may use any standard syslog facility name which is
+rsync daemon. You may use any standard syslog facility name which is
 defined on your system. Common names are auth, authpriv, cron, daemon,
 ftp, kern, lpr, mail, news, security, syslog, user, uucp, local0,
 local1, local2, local3, local4, local5, local6 and local7. The default
 is daemon. 
 
+dit(bf(port)) You can override the default port the daemon will listen on
+by specifying this value (defaults to 873).  This is ignored if the daemon
+is being run by inetd, and is superseded by the bf(--port) command-line option.
+
+dit(bf(address)) You can override the default IP address the daemon
+will listen on by specifying this value.  This is ignored if the daemon is
+being run by inetd, and is superseded by the bf(--address) command-line option.
+
 dit(bf(socket options)) This option can provide endless fun for people
 who like to tune their systems to the utmost degree. You can set all
 sorts of socket options which may make transfers faster (or
@@ -126,11 +134,11 @@ dit(bf(comment)) The "comment" option specifies a description string
 that is displayed next to the module name when clients obtain a list
 of available modules. The default is no comment.
 
-dit(bf(path)) The "path" option specifies the directory in the servers
+dit(bf(path)) The "path" option specifies the directory in the daemon's
 filesystem to make available in this module.  You must specify this option
 for each module in tt(rsyncd.conf).
 
-dit(bf(use chroot)) If "use chroot" is true, the rsync server will chroot
+dit(bf(use chroot)) If "use chroot" is true, the rsync daemon will chroot
 to the "path" before starting the file transfer with the client.  This has
 the advantage of extra protection against possible implementation security
 holes, but it has the disadvantages of requiring super-user privileges, 
@@ -157,7 +165,7 @@ differently from your normal system.  For example, you could abbreviate
 the list of users and groups.  Also, you can protect this information from
 being downloaded/uploaded by adding an exclude rule to the rsync.conf file
 (e.g. "exclude = /etc/**").  Note that having the exclusion affect uploads
-is a relatively new feature in rsync, so make sure your server is running
+is a relatively new feature in rsync, so make sure your daemon is
 at least 2.6.3 to effect this.  Also note that it is safest to exclude a
 directory and all its contents combining the rule "/some/dir/" with the
 rule "/some/dir/**" just to be sure that rsync will not allow deeper
@@ -165,14 +173,6 @@ access to some of the excluded files inside the directory (rsync tries to
 do this automatically, but you might as well specify both to be extra
 sure).
 
-dit(bf(port)) You can override the default port the daemon will listen on
-by specifying this value (defaults to 873).  This is ignored if the daemon
-is being run by inetd, and is superseded by the bf(--port) command-line option.
-
-dit(bf(address)) You can override the default IP address the daemon
-will listen on by specifying this value.  This is ignored if the daemon is
-being run by inetd, and is superseded by the bf(--address) command-line option.
-
 dit(bf(max connections)) The "max connections" option allows you to
 specify the maximum number of simultaneous connections you will allow.
 Any clients connecting when the maximum has been reached will receive a
@@ -185,7 +185,7 @@ generate (since the information goes into the log file). The default is 1,
 which allows the client to request one level of verbosity.
 
 dit(bf(lock file)) The "lock file" option specifies the file to use to
-support the "max connections" option. The rsync server uses record
+support the "max connections" option. The rsync daemon uses record
 locking on this file to ensure that the max connections limit is not
 exceeded for the modules sharing the lock file. 
 The default is tt(/var/run/rsyncd.lock).
@@ -193,13 +193,13 @@ The default is tt(/var/run/rsyncd.lock).
 dit(bf(read only)) The "read only" option determines whether clients
 will be able to upload files or not. If "read only" is true then any
 attempted uploads will fail. If "read only" is false then uploads will
-be possible if file permissions on the server allow them. The default
+be possible if file permissions on the daemon side allow them. The default
 is for all modules to be read only.
 
 dit(bf(write only)) The "write only" option determines whether clients
 will be able to download files or not. If "write only" is true then any
 attempted downloads will fail. If "write only" is false then downloads
-will be possible if file permissions on the server allow them.  The
+will be possible if file permissions on the daemon side allow them.  The
 default is for this option to be disabled.
 
 dit(bf(list)) The "list" option determines if this module should be
@@ -219,30 +219,30 @@ was run as root. This complements the "uid" option. The default is gid -2,
 which is normally the group "nobody".
 
 dit(bf(filter)) The "filter" option allows you to specify a space-separated
-list of filter rules that the server will not allow to be read or written.
+list of filter rules that the daemon will not allow to be read or written.
 This is only superficially equivalent to the client specifying these
 patterns with the bf(--filter) option.  Only one "filter" option may be
 specified, but it may contain as many rules as you like, including
 merge-file rules.  Note that per-directory merge-file rules do not provide
 as much protection as global rules, but they can be used to make bf(--delete)
-work better when a client downloads the server's files (if the per-dir
+work better when a client downloads the daemon's files (if the per-dir
 merge files are included in the transfer).
 
 dit(bf(exclude)) The "exclude" option allows you to specify a
-space-separated list of patterns that the server will not allow to be read
+space-separated list of patterns that the daemon will not allow to be read
 or written.  This is only superficially equivalent to the client
 specifying these patterns with the bf(--exclude) option.  Only one "exclude"
 option may be specified, but you can use "-" and "+" before patterns to
 specify exclude/include.
 
 Because this exclude list is not passed to the client it only applies on
-the server: that is, it excludes files received by a client when receiving
-from a server and files deleted on a server when sending to a server, but
+the daemon: that is, it excludes files received by a client when receiving
+from a daemon and files deleted on a daemon when sending to a daemon, but
 it doesn't exclude files from being deleted on a client when receiving
-from a server.  
+from a daemon.  
 
 dit(bf(exclude from)) The "exclude from" option specifies a filename
-on the server that contains exclude patterns, one per line.
+on the daemon that contains exclude patterns, one per line.
 This is only superficially equivalent
 to the client specifying the bf(--exclude-from) option with an equivalent file.
 See the "exclude" option above.
@@ -250,14 +250,14 @@ See the "exclude" option above.
 dit(bf(include)) The "include" option allows you to specify a
 space-separated list of patterns which rsync should not exclude. This is
 only superficially equivalent to the client specifying these patterns with
-the bf(--include) option because it applies only on the server.  This is
+the bf(--include) option because it applies only on the daemon.  This is
 useful as it allows you to build up quite complex exclude/include rules.
 Only one "include" option may be specified, but you can use "+" and "-"
 before patterns to switch include/exclude.  See the "exclude" option
 above.
 
 dit(bf(include from)) The "include from" option specifies a filename
-on the server that contains include patterns, one per line. This is
+on the daemon that contains include patterns, one per line. This is
 only superficially equivalent to the client specifying the
 bf(--include-from) option with a equivalent file.
 See the "exclude" option above.
@@ -273,10 +273,10 @@ usernames are passwords are stored in the file specified by the
 "secrets file" option. The default is for all users to be able to
 connect without a password (this is called "anonymous rsync").
 
-See also the bf(CONNECTING TO AN RSYNC SERVER OVER A REMOTE SHELL
-PROGRAM) section in rsync(1) for information on how handle an
+See also the "CONNECTING TO AN RSYNC DAEMON OVER A REMOTE SHELL
+PROGRAM" section in rsync(1) for information on how handle an
 rsyncd.conf-level username that differs from the remote-shell-level
-username when using a remote shell to connect to an rsync server.
+username when using a remote shell to connect to an rsync daemon.
 
 dit(bf(secrets file)) The "secrets file" option specifies the name of
 a file that contains the username:password pairs used for
@@ -351,21 +351,21 @@ rejected. See the "hosts allow" option for more information.
 The default is no "hosts deny" option, which means all hosts can connect.
 
 dit(bf(ignore errors)) The "ignore errors" option tells rsyncd to
-ignore I/O errors on the server when deciding whether to run the delete
+ignore I/O errors on the daemon when deciding whether to run the delete
 phase of the transfer. Normally rsync skips the bf(--delete) step if any
 I/O errors have occurred in order to prevent disastrous deletion due
 to a temporary resource shortage or other I/O error. In some cases this
 test is counter productive so you can use this option to turn off this
 behavior. 
 
-dit(bf(ignore nonreadable)) This tells the rsync server to completely
+dit(bf(ignore nonreadable)) This tells the rsync daemon to completely
 ignore files that are not readable by the user. This is useful for
 public archives that may have some non-readable files among the
 directories, and the sysadmin doesn't want those files to be seen at all.
 
 dit(bf(transfer logging)) The "transfer logging" option enables per-file 
 logging of downloads and uploads in a format somewhat similar to that
-used by ftp daemons.  The server always logs the transfer at the end, so
+used by ftp daemons.  The daemon always logs the transfer at the end, so
 if a transfer is aborted, no mention will be made in the log file.
 
 If you want to customize the log lines, see the "log format" option.
@@ -417,12 +417,12 @@ dit(bf(timeout)) The "timeout" option allows you to override the
 clients choice for I/O timeout for this module. Using this option you
 can ensure that rsync won't wait on a dead client forever. The timeout
 is specified in seconds. A value of zero means no timeout and is the
-default. A good choice for anonymous rsync servers may be 600 (giving
+default. A good choice for anonymous rsync daemons may be 600 (giving
 a 10 minute timeout).
 
 dit(bf(refuse options)) The "refuse options" option allows you to
 specify a space-separated list of rsync command line options that will
-be refused by your rsync server.
+be refused by your rsync daemon.
 You may specify the full option name, its one-letter abbreviation, or a
 wild-card string that matches multiple options.
 For example, this would refuse bf(--checksum) (bf(-c)) and all the various
@@ -437,7 +437,7 @@ bf(remove-sent-files) when the daemon is the sender; if you want the latter
 without the former, instead refuse "delete-*" -- that refuses all the
 delete modes without affecting bf(--remove-sent-files).
 
-When an option is refused, the server prints an error message and exits.
+When an option is refused, the daemon prints an error message and exits.
 To prevent all compression, you can use "dont compress = *" (see below)
 instead of "refuse options = compress" to avoid returning an error to a
 client that requests compression.
@@ -465,7 +465,7 @@ realize that this is not a "military strength" authentication system.
 It should be good enough for most purposes but if you want really top
 quality security then I recommend that you run rsync over ssh.
 
-Also note that the rsync server protocol does not currently provide any
+Also note that the rsync daemon protocol does not currently provide any
 encryption of the data that is transferred over the connection. Only
 authentication is provided. Use ssh as the transport if you want
 encryption.
@@ -473,32 +473,6 @@ encryption.
 Future versions of rsync may support SSL for better authentication and
 encryption, but that is still being investigated.
 
-manpagesection(RUNNING AN RSYNC SERVER OVER A REMOTE SHELL PROGRAM)
-
-If rsync is run with both the bf(--daemon) and bf(--rsh) (bf(-e)) options, it will
-spawn an rsync daemon using a remote shell connection.  Several
-configuration options will not be available unless the remote user is
-root (e.g. chroot, setuid/setgid, etc.).  There is no need to configure
-inetd or the services map to include the rsync server port if you run an
-rsync server only via a remote shell program.
-
-ADVANCED: To run an rsync server out of a single-use ssh key, use the
-"command=em(COMMAND)" syntax in the remote user's authorized_keys entry,
-where command would be
-
-quote(tt(rsync --server --daemon .))
-
-NOTE: rsync's argument parsing expects the trailing ".", so make sure
-that it's there.  If you want to use an rsyncd.conf(5)-style
-configuration file other than the default, you can added a
-bf(--config) option to the em(command):
-
-quote(tt(rsync --server --daemon --config=em(file) .))
-
-Note that the "--server" here is the internal option that rsync uses to
-run the remote version of rsync that it communicates with, and thus you
-should not be using the bf(--server) option under normal circumstances.
-
 manpagesection(EXAMPLES)
 
 A simple rsyncd.conf file that allow anonymous rsync to a ftp area at
@@ -562,15 +536,12 @@ manpagediagnostics()
 
 manpagebugs()
 
-The rsync server does not send all types of error messages to the
-client. this means a client may be mystified as to why a transfer
-failed. The error will have been logged by syslog on the server.
-
 Please report bugs! The rsync bug tracking system is online at
 url(http://rsync.samba.org/)(http://rsync.samba.org/)
 
 manpagesection(VERSION)
-This man page is current for version 2.x of rsync.
+
+This man page is current for version 2.6.6 of rsync.
 
 manpagesection(CREDITS)
 
@@ -591,7 +562,7 @@ Gailly and Mark Adler.
 manpagesection(THANKS)
 
 Thanks to Warren Stanley for his original idea and patch for the rsync
-server. Thanks to Karsten Thygesen for his many suggestions and
+daemon. Thanks to Karsten Thygesen for his many suggestions and
 documentation! 
 
 manpageauthor()

sender.c

@@ -20,20 +20,24 @@
 #include "rsync.h"
 
 extern int verbose;
-extern int dry_run;
+extern int do_xfers;
 extern int am_server;
 extern int am_daemon;
 extern int log_before_transfer;
 extern int log_format_has_i;
 extern int daemon_log_format_has_i;
 extern int csum_length;
+extern int append_mode;
 extern int io_error;
+extern int allowed_lull;
 extern int protocol_version;
 extern int remove_sent_files;
 extern int updating_basis_file;
 extern int make_backups;
 extern int do_progress;
 extern int inplace;
+extern int batch_fd;
+extern int write_batch;
 extern struct stats stats;
 extern struct file_list *the_file_list;
 extern char *log_format;
@@ -54,6 +58,7 @@ static struct sum_struct *receive_sums(int f)
 {
 	struct sum_struct *s;
 	int32 i;
+	int lull_mod = allowed_lull * 5;
 	OFF_T offset = 0;
 
 	if (!(s = new(struct sum_struct)))
@@ -68,6 +73,13 @@ static struct sum_struct *receive_sums(int f)
 			(double)s->count, (long)s->blength, (long)s->remainder);
 	}
 
+	if (append_mode) {
+		s->flength = (OFF_T)s->count * s->blength;
+		if (s->remainder)
+			s->flength -= s->blength - s->remainder;
+		return s;
+	}
+
 	if (s->count == 0)
 		return(s);
 
@@ -87,6 +99,9 @@ static struct sum_struct *receive_sums(int f)
 			s->sums[i].len = s->blength;
 		offset += s->sums[i].len;
 
+		if (allowed_lull && !(i % lull_mod))
+			maybe_send_keepalive();
+
 		if (verbose > 3) {
 			rprintf(FINFO,
 				"chunk[%d] len=%d offset=%.0f sum1=%08x\n",
@@ -173,10 +188,6 @@ int read_item_attrs(int f_in, int f_out, int ndx, uchar *type_ptr,
 	}
 	*len_ptr = len;
 
-	/* Temporary handling of 2.6.4pre3 */
-	if (iflags & ITEM_DUMMY_BIT && iflags & (ITEM_LOCAL_CHANGE|ITEM_TRANSFER))
-		iflags &= ~ITEM_DUMMY_BIT;
-
 	if (iflags & ITEM_TRANSFER) {
 		if (!S_ISREG(the_file_list->files[ndx]->mode)) {
 			rprintf(FERROR,
@@ -208,6 +219,7 @@ void send_files(struct file_list *flist, int f_out, int f_in)
 	int save_make_backups = make_backups;
 	int itemizing = am_daemon ? daemon_log_format_has_i
 		      : !am_server && log_format_has_i;
+	int f_xfer = write_batch < 0 ? batch_fd : f_out;
 	int i, j;
 
 	if (verbose > 2)
@@ -227,6 +239,7 @@ void send_files(struct file_list *flist, int f_out, int f_in)
 			/* For inplace: redo phase turns off the backup
 			 * flag so that we do a regular inplace send. */
 			make_backups = 0;
+			append_mode = 0;
 			continue;
 		}
 
@@ -266,7 +279,7 @@ void send_files(struct file_list *flist, int f_out, int f_in)
 		stats.num_transferred_files++;
 		stats.total_transferred_size += file->length;
 
-		if (dry_run) { /* log the transfer */
+		if (!do_xfers) { /* log the transfer */
 			if (!am_server && log_format)
 				log_item(file, &stats, iflags, NULL);
 			write_ndx_and_attrs(f_out, i, iflags, fnamecmp_type,
@@ -323,7 +336,7 @@ void send_files(struct file_list *flist, int f_out, int f_in)
 
 		write_ndx_and_attrs(f_out, i, iflags, fnamecmp_type,
 				    xname, xlen);
-		write_sum_head(f_out, s);
+		write_sum_head(f_xfer, s);
 
 		if (verbose > 2) {
 			rprintf(FINFO, "calling match_sums %s\n",
@@ -337,7 +350,7 @@ void send_files(struct file_list *flist, int f_out, int f_in)
 
 		set_compression(fname);
 
-		match_sums(f_out, s, mbuf, st.st_size);
+		match_sums(f_xfer, s, mbuf, st.st_size);
 		if (do_progress)
 			end_progress(st.st_size);
 

socket.c

@@ -127,7 +127,7 @@ static int establish_proxy_connection(int fd, char *host, int port,
  * if this fails.
  **/
 int try_bind_local(int s, int ai_family, int ai_socktype,
-		   const char *bind_address)
+		   const char *bind_addr)
 {
 	int error;
 	struct addrinfo bhints, *bres_all, *r;
@@ -136,9 +136,9 @@ int try_bind_local(int s, int ai_family, int ai_socktype,
 	bhints.ai_family = ai_family;
 	bhints.ai_socktype = ai_socktype;
 	bhints.ai_flags = AI_PASSIVE;
-	if ((error = getaddrinfo(bind_address, NULL, &bhints, &bres_all))) {
+	if ((error = getaddrinfo(bind_addr, NULL, &bhints, &bres_all))) {
 		rprintf(FERROR, RSYNC_NAME ": getaddrinfo %s: %s\n",
-			bind_address, gai_strerror(error));
+			bind_addr, gai_strerror(error));
 		return -1;
 	}
 
@@ -172,12 +172,12 @@ int try_bind_local(int s, int ai_family, int ai_socktype,
  * reachable, perhaps because we can't e.g. route ipv6 to that network
  * but we can get ip4 packets through.
  *
- * @param bind_address Local address to use.  Normally NULL to bind
+ * @param bind_addr Local address to use.  Normally NULL to bind
  * the wildcard address.
  *
  * @param af_hint Address family, e.g. AF_INET or AF_INET6.
  **/
-int open_socket_out(char *host, int port, const char *bind_address,
+int open_socket_out(char *host, int port, const char *bind_addr,
 		    int af_hint)
 {
 	int type = SOCK_STREAM;
@@ -253,9 +253,9 @@ int open_socket_out(char *host, int port, const char *bind_address,
 		if (s < 0)
 			continue;
 
-		if (bind_address
+		if (bind_addr
 		 && try_bind_local(s, res->ai_family, type,
-				   bind_address) == -1) {
+				   bind_addr) == -1) {
 			close(s);
 			s = -1;
 			continue;
@@ -293,9 +293,9 @@ int open_socket_out(char *host, int port, const char *bind_address,
  *
  * This is based on the Samba LIBSMB_PROG feature.
  *
- * @param bind_address Local address to use.  Normally NULL to get the stack default.
+ * @param bind_addr Local address to use.  Normally NULL to get the stack default.
  **/
-int open_socket_out_wrapped(char *host, int port, const char *bind_address,
+int open_socket_out_wrapped(char *host, int port, const char *bind_addr,
 			    int af_hint)
 {
 	char *prog = getenv("RSYNC_CONNECT_PROG");
@@ -307,7 +307,7 @@ int open_socket_out_wrapped(char *host, int port, const char *bind_address,
 	}
 	if (prog)
 		return sock_exec(prog);
-	return open_socket_out(host, port, bind_address, af_hint);
+	return open_socket_out(host, port, bind_addr, af_hint);
 }
 
 
@@ -322,10 +322,10 @@ int open_socket_out_wrapped(char *host, int port, const char *bind_address,
  * We return an array of file-descriptors to the sockets, with a trailing
  * -1 value to indicate the end of the list.
  *
- * @param bind_address Local address to bind, or NULL to allow it to
+ * @param bind_addr Local address to bind, or NULL to allow it to
  * default.
  **/
-static int *open_socket_in(int type, int port, const char *bind_address,
+static int *open_socket_in(int type, int port, const char *bind_addr,
 			   int af_hint)
 {
 	int one = 1;
@@ -339,10 +339,10 @@ static int *open_socket_in(int type, int port, const char *bind_address,
 	hints.ai_socktype = type;
 	hints.ai_flags = AI_PASSIVE;
 	snprintf(portbuf, sizeof portbuf, "%d", port);
-	error = getaddrinfo(bind_address, portbuf, &hints, &all_ai);
+	error = getaddrinfo(bind_addr, portbuf, &hints, &all_ai);
 	if (error) {
 		rprintf(FERROR, RSYNC_NAME ": getaddrinfo: bind address %s: %s\n",
-			bind_address, gai_strerror(error));
+			bind_addr, gai_strerror(error));
 		return NULL;
 	}
 
@@ -478,7 +478,7 @@ void start_accept_loop(int port, int (*fn)(int, int))
 		/* close log file before the potentially very long select so
 		 * file can be trimmed by another process instead of growing
 		 * forever */
-		log_close();
+		logfile_close();
 
 #ifdef FD_COPY
 		FD_COPY(&deffds, &fds);
@@ -507,8 +507,8 @@ void start_accept_loop(int port, int (*fn)(int, int))
 			for (i = 0; sp[i] >= 0; i++)
 				close(sp[i]);
 			/* Re-open log file in child before possibly giving
-			 * up privileges (see log_close() above). */
-			log_open();
+			 * up privileges (see logfile_close() above). */
+			logfile_reopen();
 			ret = fn(fd, fd);
 			close_all();
 			_exit(ret);

support/atomic-rsync

@@ -1,9 +1,9 @@
 #!/usr/bin/perl
 #
 # This script lets you update a hierarchy of files in an atomic way by
-# first creating a new hierarchy using --link-dest to rsync, and then
-# swapping the hierarchy into place.  See the usage message for more
-# details and some important caveats!
+# first creating a new hierarchy using rsync's --link-dest option, and
+# then swapping the hierarchy into place.  **See the usage message for
+# more details and some important caveats!**
 
 use strict;
 use Cwd 'abs_path';

support/cull_options

@@ -0,0 +1,64 @@
+#!/usr/bin/perl
+# This script outputs some perl code that parses all possible options
+# that the code in options.c might send to the server.  This perl code
+# is included in the rrsync script.
+use strict;
+
+our(%short_no_arg, %short_with_num, %long_opt);
+our $last_long_opt;
+
+open(IN, '../options.c') or die "Unable to open ../options.c: $!\n";
+
+while (<IN>) {
+    if (/\Qargstr[x++]\E = '(.)'/) {
+	$short_no_arg{$1} = 1;
+	undef $last_long_opt;
+    } elsif (/\Qasprintf(\E[^,]+, "-([a-zA-Z0-9])\%l?[ud]"/) {
+	$short_with_num{$1} = 1;
+	undef $last_long_opt;
+    } elsif (/\Qargs[ac++]\E = "--([^"=]+)"/) {
+	$last_long_opt = $1;
+	$long_opt{$1} = 0;
+    } elsif (defined($last_long_opt)
+	&& /\Qargs[ac++]\E = ([^["\s]+);/ && $1 ne 'dest_option') {
+	$long_opt{$last_long_opt} = 2;
+	undef $last_long_opt;
+    } elsif (/dest_option = "--([^"]+)"/) {
+	$long_opt{$1} = 2;
+	undef $last_long_opt;
+    } elsif (/\Qasprintf(\E[^,]+, "--([^"=]+)=/ || /\Qargs[ac++]\E = "--([^"=]+)=/) {
+	$long_opt{$1} = 1;
+	undef $last_long_opt;
+    }
+}
+close IN;
+
+my $short_no_arg = join('', sort keys %short_no_arg);
+my $short_with_num = join('', sort keys %short_with_num);
+
+print <<EOT;
+
+# These options are the only options that rsync might send to the server,
+# and only in the option format that the stock rsync produces.
+
+# To disable a short-named option, add its letter to this string:
+our \$short_disabled = '';
+
+our \$short_no_arg = '$short_no_arg'; # DO NOT REMOVE ANY
+our \$short_with_num = '$short_with_num'; # DO NOT REMOVE ANY
+
+# To disable a long-named option, change its value to a -1.  The values mean:
+# 0 = the option has no arg; 1 = the arg doesn't need any checking; 2 = only
+# check the arg when receiving; and 3 = always check the arg.
+our \%long_opt = (
+EOT
+
+foreach my $opt (sort keys %long_opt) {
+    my $val = $long_opt{$opt};
+    $val = 1 if $opt =~ /^max-/;
+    $val = 3 if $opt eq 'files-from';
+    $val = '$ro ? -1 : ' . $val if $opt =~ /^remove-/;
+    print "  '$opt' => $val,\n";
+}
+
+print ");\n\n";

support/cvs2includes

@@ -0,0 +1,42 @@
+#!/usr/bin/perl
+#
+# This script finds all CVS/Entries files in the current directory and below
+# and creates a local .cvsinclude file with non-inherited rules including each
+# checked-in file.  Then, use this option whenever using --cvs-exclude (-C):
+#
+# 	-f ': .cvsinclude'
+#
+# That ensures that all checked-in files/dirs are included in the transfer.
+# (You could alternately put ": .cvsinclude" into an .rsync-filter file and
+# use the -F option, which is easier to type.)
+#
+# The downside is that you need to remember to re-run cvs2includes whenever
+# You add a new file to the project.
+use strict;
+
+open(FIND, 'find . -name CVS -type d |') or die $!;
+while (<FIND>) {
+    chomp;
+    s#^\./##;
+
+    my $entries = "$_/Entries";
+    s/CVS$/.cvsinclude/;
+    my $filter = $_;
+
+    open(ENTRIES, $entries) or die "Unable to open $entries: $!\n";
+    my @includes;
+    while (<ENTRIES>) {
+	push(@includes, $1) if m#/(.+?)/#;
+    }
+    close ENTRIES;
+    if (@includes) {
+	open(FILTER, ">$filter") or die "Unable to write $filter: $!\n";
+	print FILTER '+ /', join("\n+ /", @includes), "\n";
+	close FILTER;
+	print "Updated $filter\n";
+    } elsif (-f $filter) {
+	unlink($filter);
+	print "Removed $filter\n";
+    }
+}
+close FIND;

support/mnt-excl

@@ -20,7 +20,7 @@
 # ADDENDUM:  The addition of the --filter option (which has support for
 # absolute-anchored excludes) has made this script less useful than it
 # was.  Beginning with 2.6.4, you can achieve the effect of this script
-# though this command:
+# through this command:
 #
 # awk '{print $2}' /proc/mounts | rsync -f 'merge,/- -' host:/dir /dest/
 

support/rrsync

@@ -2,18 +2,28 @@
 # Name: /usr/local/bin/rrsync (should also have a symlink in /usr/bin)
 # Purpose: Restricts rsync to subdirectory declared in .ssh/authorized_keys
 # Author: Joe Smith <js-cgi@inwap.com> 30-Sep-2004
-# Modified by Wayne Davison <wayned@samba.org> 12-Jan-2005
+# Modified by: Wayne Davison <wayned@samba.org>
+use strict;
 
 use Socket;
+use Cwd 'abs_path';
+use File::Glob ':glob';
+
+# You may configure these values to your liking.  See also the section
+# of options if you want to disable any options that rsync accepts.
+use constant RSYNC => '/usr/bin/rsync';
 use constant LOGFILE => 'rrsync.log';
+
 my $Usage = <<EOM;
 Use 'command="$0 [-ro] SUBDIR"'
 	in front of lines in $ENV{HOME}/.ssh/authorized_keys
 EOM
 
-my $ro = (@ARGV and $ARGV[0] eq '-ro') ? shift : '';	# -ro = Read-Only
-my $subdir = shift;
-die "No subdirectory specified\n$Usage" unless defined $subdir;
+our $ro = (@ARGV && $ARGV[0] eq '-ro') ? shift : '';	# -ro = Read-Only
+our $subdir = shift;
+die "$0: No subdirectory specified\n$Usage" unless defined $subdir;
+$subdir = abs_path($subdir);
+die "$0: Restricted directory does not exist!\n" if $subdir ne '/' && !-d $subdir;
 
 # The client uses "rsync -av -e ssh src/ server:dir/", and sshd on the server
 # executes this program when .ssh/authorized_keys has 'command="..."'.
@@ -22,53 +32,166 @@ die "No subdirectory specified\n$Usage" unless defined $subdir;
 # command="rrsync -ro results" ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAmkHG1WCjC...
 #
 # Format of the envrionment variables set by sshd:
-# SSH_ORIGINAL_COMMAND=rsync --server          -vlogDtpr --partial . dir # push
-# SSH_ORIGINAL_COMMAND=rsync --server --sender -vlogDtpr --partial . dir # pull
+# SSH_ORIGINAL_COMMAND=rsync --server          -vlogDtpr --partial . ARG # push
+# SSH_ORIGINAL_COMMAND=rsync --server --sender -vlogDtpr --partial . ARGS # pull
 # SSH_CONNECTION=client_addr client_port server_port
 
 my $command = $ENV{SSH_ORIGINAL_COMMAND};
-die "Not invoked via sshd\n$Usage"	unless defined $command;
-die "SSH_ORIGINAL_COMMAND='$command' is not rsync\n" unless $command =~ /^rsync\s/;
-die "$0 -ro: sending to read-only server not allowed\n"
-	if $ro and $command !~ /^rsync --server --sender /;
-die "$0 -ro: use of --remove-sent-files with read-only server not allowed\n"
-	if $ro and $command =~ /\s--remove-sent-files/;
+die "$0: Not invoked via sshd\n$Usage"	unless defined $command;
+die "$0: SSH_ORIGINAL_COMMAND='$command' is not rsync\n" unless $command =~ s/^rsync\s+//;
+our $am_sender = $command =~ /^--server\s+--sender\s/; # Restrictive on purpose!
+die "$0 -ro: sending to read-only server not allowed\n" if $ro && !$am_sender;
 
-my ($cmd,$dir) = $command =~ /^(rsync\s+(?:-[-a-zA-Z]+\s+)+\.) ?("[^"]*"|[^\s"]*)$/;
-die "$0: invalid rsync-command syntax or options\n" if !defined $cmd;
+### START of options data produced by the cull_options script. ###
 
-# Enforce default of $subdir instead of the normal $HOME default.
-my $orig = $dir;
-my @dirs;
-$dir =~ s/^"(.*?)"$/$1/;
-$dir =~ s/^\s+//;
-$dir =~ s/\s+$//;
-foreach (split(/(?<!\\)\s+/, $dir)) {
-  s/\\(\s)/$1/g;			# Unescape any escaped whitespace
-  if ($subdir eq '/') {			# Less checking for '/' access
-    $dir = '/' if $dir eq '';
-  } else {
-    s#^/##;				# Don't allow absolute paths
-    $_ = "$subdir/$_" unless m#^\Q$subdir\E(/|$)#;
-    1 while s#/\.\.(/|$)#/__/#g;	# Don't allow foo/../../etc
-  }
-  tr#-_/a-zA-Z0-9.,+@^%: #_#c;		# Don't allow '"&;|!=()[]{}<>*?#\$
-  s/(\s)/\\$1/g;			# Re-escape whitespace
-  push(@dirs, $_);
+# These options are the only options that rsync might send to the server,
+# and only in the option format that the stock rsync produces.
+
+# To disable a short-named option, add its letter to this string:
+our $short_disabled = '';
+
+our $short_no_arg = 'CDHIKLORSWbcdglnoprtuvxz'; # DO NOT REMOVE ANY
+our $short_with_num = 'B'; # DO NOT REMOVE ANY
+
+# To disable a long-named option, change its value to a -1.  The values mean:
+# 0 = the option has no arg; 1 = the arg doesn't need any checking; 2 = only
+# check the arg when receiving; and 3 = always check the arg.
+our %long_opt = (
+  'backup-dir' => 2,
+  'bwlimit' => 1,
+  'checksum-seed' => 1,
+  'compare-dest' => 2,
+  'copy-dest' => 2,
+  'copy-unsafe-links' => 0,
+  'daemon' => 0,
+  'delay-updates' => 0,
+  'delete' => 0,
+  'delete-after' => 0,
+  'delete-before' => 0,
+  'delete-during' => 0,
+  'delete-excluded' => 0,
+  'existing' => 0,
+  'files-from' => 3,
+  'force' => 0,
+  'from0' => 0,
+  'fuzzy' => 0,
+  'ignore-errors' => 0,
+  'ignore-existing' => 0,
+  'inplace' => 0,
+  'link-dest' => 2,
+  'list-only' => 0,
+  'log-format' => 1,
+  'max-delete' => 1,
+  'max-size' => 1,
+  'modify-window' => 1,
+  'no-implied-dirs' => 0,
+  'no-relative' => 0,
+  'numeric-ids' => 0,
+  'only-write-batch' => 1,
+  'partial' => 0,
+  'partial-dir' => 2,
+  'remove-sent-files' => $ro ? -1 : 0,
+  'safe-links' => 0,
+  'sender' => 0,
+  'server' => 0,
+  'size-only' => 0,
+  'suffix' => 1,
+  'temp-dir' => 2,
+  'timeout' => 1,
+);
+
+### END of options data produced by the cull_options script. ###
+
+if ($short_disabled ne '') {
+    $short_no_arg =~ s/[$short_disabled]//go;
+    $short_with_num =~ s/[$short_disabled]//go;
 }
-push(@dirs, $subdir) unless @dirs;
-$dir = join(' ', @dirs);
+$short_no_arg = "[$short_no_arg]" if length($short_no_arg) > 1;
+$short_with_num = "[$short_with_num]" if length($short_with_num) > 1;
 
-if (-f LOGFILE and open LOG,'>>',LOGFILE) {
+my $write_log = -f LOGFILE && open(LOG, '>>', LOGFILE);
+
+chdir($subdir) or die "$0: Unable to chdir to restricted dir: $!\n";
+
+my(@opts, @args);
+my $in_options = 1;
+my $last_opt = '';
+my $check_type;
+while ($command =~ /((?:[^\s\\]+|\\.[^\s\\]*)+)/g) {
+  $_ = $1;
+  if ($check_type) {
+    push(@opts, check_arg($last_opt, $_, $check_type));
+    $check_type = 0;
+  } elsif ($in_options) {
+    push(@opts, $_);
+    if ($_ eq '.') {
+      $in_options = 0;
+    } else {
+      next if /^-$short_no_arg+$/o || /^-$short_with_num\d+$/o;
+
+      my($opt,$arg) = /^--([^=]+)(?:=(.*))?$/;
+      my $disabled;
+      if (defined $opt) {
+	my $ct = $long_opt{$opt};
+	last unless defined $ct;
+	next if $ct == 0;
+	if ($ct > 0) {
+	  if (!defined $arg) {
+	    $check_type = $ct;
+	    $last_opt = $opt;
+	    next;
+	  }
+	  $arg = check_arg($opt, $arg, $ct);
+	  $opts[-1] =~ s/=.*/=$arg/;
+	  next;
+	}
+	$disabled = 1;
+	$opt = "--$opt";
+      } elsif ($short_disabled ne '') {
+	$disabled = /^-$short_no_arg*([$short_disabled])/o;
+	$opt = "-$1";
+      }
+
+      last unless $disabled; # Generate generic failure
+      die "$0: option $opt has been disabled on this server.\n";
+    }
+  } else {
+    if ($subdir ne '/') {
+      # Validate args to ensure they don't try to leave our restricted dir.
+      s#//+#/#g;
+      s#^/##;
+      s#^$#.#;
+      die "Do not use .. in any path!\n" if m#(^|/)\\?\.\\?\.(\\?/|$)#;
+    }
+    push(@args, bsd_glob($_, GLOB_LIMIT|GLOB_NOCHECK|GLOB_BRACE|GLOB_QUOTE));
+  }
+}
+die "$0: invalid rsync-command syntax or options\n" if $in_options;
+
+@args = ( '.' ) if !@args;
+
+if ($write_log) {
   my ($mm,$hh) = (localtime)[1,2];
   my $host = $ENV{SSH_CONNECTION} || 'unknown';
-  $host =~ s/ .*//;			# Keep only the client's IP addr
+  $host =~ s/ .*//; # Keep only the client's IP addr
   $host =~ s/^::ffff://;
   $host = gethostbyaddr(inet_aton($host),AF_INET) || $host;
-  my $dir_result = $dir eq $orig ? " OK" : "> \"$dir\"";
-  printf LOG "%02d:%02d %-13s [%s] =%s\n", $hh, $mm, $host, $command, $dir_result;
+  printf LOG "%02d:%02d %-13s [%s]\n", $hh, $mm, $host, "@opts @args";
   close LOG;
 }
 
-exec "$cmd \"$dir\"" or die "exec($cmd \"$dir\") failed: $? $!";
 # Note: This assumes that the rsync protocol will not be maliciously hijacked.
+exec(RSYNC, @opts, @args) or die "exec(rsync @opts @args) failed: $? $!";
+
+sub check_arg
+{
+  my($opt, $arg, $type) = @_;
+  $arg =~ s/\\(.)/$1/g;
+  if ($subdir ne '/' && ($type == 3 || ($type == 2 && !$am_sender))) {
+    $arg =~ s#//#/#g;
+    die "Do not use .. in --$opt; anchor the path at the root of your restricted dir.\n"
+      if $arg =~ m#(^|/)\.\.(/|$)#;
+    $arg =~ s#^/#$subdir/#;
+  }
+  $arg;
+}

syscall.c

@@ -104,7 +104,11 @@ int do_mknod(char *pathname, mode_t mode, dev_t dev)
 		    || (bind(sock, (struct sockaddr*)&saddr, sizeof saddr)) < 0)
 			return -1;
 		close(sock);
+#ifdef HAVE_CHMOD
 		return do_chmod(pathname, mode);
+#else
+		return 0;
+#endif
 	}
 #endif
 #ifdef HAVE_MKNOD
@@ -137,7 +141,14 @@ int do_chmod(const char *path, mode_t mode)
 	int code;
 	if (dry_run) return 0;
 	RETURN_ERROR_IF_RO_OR_LO;
-	code = chmod(path, mode);
+	if (S_ISLNK(mode)) {
+#ifdef HAVE_LCHMOD
+		code = lchmod(path, mode & CHMOD_BITS);
+#else
+		code = 1;
+#endif
+	} else
+		code = chmod(path, mode & CHMOD_BITS);
 	if (code != 0 && preserve_perms)
 	    return code;
 	return 0;
@@ -243,7 +254,7 @@ int do_fstat(int fd, STRUCT_STAT *st)
 
 OFF_T do_lseek(int fd, OFF_T offset, int whence)
 {
-#if SIZEOF_OFF64_T
+#ifdef HAVE_LSEEK64
 	off64_t lseek64();
 	return lseek64(fd, offset, whence);
 #else

testsuite/backup.test

@@ -17,14 +17,14 @@ name2="$fromdir/name2"
 
 outfile="$scratchdir/rsync.out"
 
-cat $srcdir/[gr]*.[ch] > "$name1"
-cat $srcdir/[et]*.[ch] > "$name2"
+cat "$srcdir"/[gr]*.[ch] > "$name1"
+cat "$srcdir"/[et]*.[ch] > "$name2"
 
 checkit "$RSYNC -avv \"$fromdir/\" \"$todir/\"" "$fromdir" "$todir"
 
 checkit "$RSYNC -avv \"$fromdir/\" \"$chkdir/\"" "$fromdir" "$chkdir"
-cat $srcdir/[fgpr]*.[ch] > "$name1"
-cat $srcdir/[etw]*.[ch] > "$name2"
+cat "$srcdir"/[fgpr]*.[ch] > "$name1"
+cat "$srcdir"/[etw]*.[ch] > "$name2"
 
 $RSYNC -avv --no-whole-file --backup "$fromdir/" "$todir/" \
     | tee "$outfile"
@@ -35,17 +35,22 @@ for fn in name1 name2; do
     mv "$todir/$fn~" "$todir/$fn"
 done
 
-checkit "$RSYNC -avv --no-whole-file --backup --backup-dir=\"$bakdir\" \"$fromdir/\" \"$todir/\"" "$fromdir" "$todir" \
+echo deleted-file >"$todir/dname"
+cp -p "$todir/dname" "$chkdir"
+
+checkit "$RSYNC -avv --no-whole-file --delete-after \
+    --backup --backup-dir=\"$bakdir\" \"$fromdir/\" \"$todir/\"" "$fromdir" "$todir" \
     | tee "$outfile"
 
 for fn in name1 name2; do
     grep "backed up $fn to .*/$fn$" "$outfile" >/dev/null || test_fail "no backup message output for $fn"
 done
 diff -r $diffopt "$chkdir" "$bakdir" || test_fail "backup dir contents are bogus"
+rm "$bakdir/dname"
 
-checkit "$RSYNC -avv \"$fromdir/\" \"$chkdir/\"" "$fromdir" "$chkdir"
-cat $srcdir/[efgr]*.[ch] > "$name1"
-cat $srcdir/[ew]*.[ch] > "$name2"
+checkit "$RSYNC -avv --del \"$fromdir/\" \"$chkdir/\"" "$fromdir" "$chkdir"
+cat "$srcdir"/[efgr]*.[ch] > "$name1"
+cat "$srcdir"/[ew]*.[ch] > "$name2"
 
 checkit "$RSYNC -avv --inplace --no-whole-file --backup --backup-dir=\"$bakdir\" \"$fromdir/\" \"$todir/\"" "$fromdir" "$todir" \
     | tee "$outfile"

testsuite/hands.test

@@ -20,7 +20,7 @@ rm "$todir/text"
 runtest "one file" 'checkit "$RSYNC -avH \"$fromdir/\" \"$todir\"" "$fromdir/" "$todir"'
 
 echo "extra line" >> "$todir/text"
-runtest "extra data" 'checkit "$RSYNC -avH \"$fromdir/\" \"$todir\"" "$fromdir/" "$todir"'
+runtest "extra data" 'checkit "$RSYNC -avH --no-whole-file \"$fromdir/\" \"$todir\"" "$fromdir/" "$todir"'
 
 cp "$fromdir/text" "$todir/ThisShouldGo"
 runtest " --delete" 'checkit "$RSYNC --delete -avH \"$fromdir/\" \"$todir\"" "$fromdir/" "$todir"'

testsuite/hardlinks.test

@@ -30,8 +30,34 @@ echo "This is the file" > "$name1"
 ln "$name1" "$name2" || fail "Can't create hardlink"
 ln "$name2" "$name3" || fail "Can't create hardlink"
 cp "$name2" "$name4" || fail "Can't copy file"
+cat $srcdir/*.c >"$fromdir/text"
 
 checkit "$RSYNC -aHivv \"$fromdir/\" \"$todir/\"" "$fromdir" "$todir"
 
+echo "extra extra" >>"$todir/name1"
+
+checkit "$RSYNC -aHivv --no-whole-file \"$fromdir/\" \"$todir/\"" "$fromdir" "$todir"
+
+# Add a new link in a new subdirectory to test that we don't try to link
+# the files before the directory gets created.
+mkdir "$fromdir/subdir"
+ln "$name1" "$fromdir/subdir/new-file"
+rm "$todir/text"
+
+checkit "$RSYNC -aHivv \"$fromdir/\" \"$todir/\"" "$fromdir" "$todir"
+
+# Do some duplicate copies using --link-dest and --copy-dest to test that
+# we hard-link all locally-inherited items.
+checkit "$RSYNC -aHivv --link-dest=\"$todir\" \"$fromdir/\" \"$chkdir/\"" "$todir" "$chkdir"
+
+rm -rf "$chkdir"
+checkit "$RSYNC -aHivv --copy-dest=\"$todir\" \"$fromdir/\" \"$chkdir/\"" "$fromdir" "$chkdir"
+
+# Make sure there's nothing wrong with sending a single file with -H
+# enabled (this has broken twice so far, so we need this test).
+rm -rf "$todir"
+$RSYNC -aHivv "$name1" "$todir/"
+diff $diffopt "$name1" "$todir" || test_fail "solo copy of name1 failed"
+
 # The script would have aborted on error, so getting here means we've won.
 exit 0

testsuite/itemize.test

@@ -0,0 +1,178 @@
+#! /bin/sh
+
+# Copyright (C) 2005 by Wayne Davison <wayned@samba.org>
+
+# This program is distributable under the terms of the GNU GPL see
+# COPYING).
+
+# Test the output of various copy commands to ensure itemized output
+# and double-verbose output is correct.
+
+. "$suitedir/rsync.fns"
+
+set -x
+
+lddir="$tmpdir/ld"
+
+chkfile="$scratchdir/rsync.chk"
+outfile="$scratchdir/rsync.out"
+
+# This is only called if rsync was run with -v or -vv (not -i alone).
+# Higher levels of -v would require more filtering.
+filter_outfile() {
+    sed -e '/^building file list /d' \
+	-e '/^created directory /d' \
+	-e '/^done$/d' \
+	-e '/ --whole-file$/d' \
+	-e '/^total: /d' \
+	-e '/^$/,$d' \
+	<"$outfile" >"$outfile.new"
+    mv "$outfile.new" "$outfile"
+}
+
+makepath "$fromdir/foo"
+makepath "$fromdir/bar/baz"
+cp -p "$srcdir/configure.in" "$fromdir/foo/config1"
+cp -p "$srcdir/config.h.in" "$fromdir/foo/config2"
+cp -p "$srcdir/rsync.h" "$fromdir/bar/baz/rsync"
+chmod 600 "$fromdir"/foo/config? "$fromdir/bar/baz/rsync"
+umask 0
+ln -s ../bar/baz/rsync "$fromdir/foo/sym"
+umask 022
+ln "$fromdir/foo/config1" "$fromdir/foo/extra"
+
+$RSYNC -iplr "$fromdir/" "$todir/" \
+    | tee "$outfile"
+cat <<EOT >"$chkfile"
+cd+++++++ bar/
+cd+++++++ bar/baz/
+>f+++++++ bar/baz/rsync
+cd+++++++ foo/
+>f+++++++ foo/config1
+>f+++++++ foo/config2
+>f+++++++ foo/extra
+cL+++++++ foo/sym -> ../bar/baz/rsync
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 1 failed"
+
+# Ensure there are no accidental directory-time problems.
+$RSYNC -a -f '-! */' "$fromdir/" "$todir"
+
+cp -p "$srcdir/configure.in" "$fromdir/foo/config2"
+chmod 601 "$fromdir/foo/config2"
+$RSYNC -iplrH "$fromdir/" "$todir/" \
+    | tee "$outfile"
+cat <<EOT >"$chkfile"
+>f..T.... bar/baz/rsync
+>f..T.... foo/config1
+>f.sTp... foo/config2
+hf..T.... foo/extra => foo/config1
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 2 failed"
+
+$RSYNC -a -f '-! */' "$fromdir/" "$todir"
+sleep 1 # For directory mod below to ensure time difference
+rm "$todir/foo/sym"
+umask 0
+ln -s ../bar/baz "$todir/foo/sym"
+umask 022
+cp -p "$srcdir/config.h.in" "$fromdir/foo/config2"
+chmod 600 "$fromdir/foo/config2"
+chmod 777 "$todir/bar/baz/rsync"
+
+$RSYNC -iplrtc "$fromdir/" "$todir/" \
+    | tee "$outfile"
+cat <<EOT >"$chkfile"
+.f..tp... bar/baz/rsync
+.d..t.... foo/
+.f..t.... foo/config1
+>fcstp... foo/config2
+cL..T.... foo/sym -> ../bar/baz/rsync
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 3 failed"
+
+cp -p "$srcdir/configure.in" "$fromdir/foo/config2"
+chmod 600 "$fromdir/foo/config2"
+# Lack of -t is for unchanged hard-link stress-test!
+$RSYNC -vvplrH "$fromdir/" "$todir/" \
+    | tee "$outfile"
+filter_outfile
+cat <<EOT >"$chkfile"
+bar/baz/rsync is uptodate
+foo/config1 is uptodate
+foo/config2
+"foo/extra" is a hard link
+foo/sym is uptodate
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 4 failed"
+
+chmod 747 "$todir/bar/baz/rsync"
+$RSYNC -a -f '-! */' "$fromdir/" "$todir"
+$RSYNC -ivvplrtH "$fromdir/" "$todir/" \
+    | tee "$outfile"
+filter_outfile
+cat <<EOT >"$chkfile"
+.d        ./
+.d        bar/
+.d        bar/baz/
+.f...p... bar/baz/rsync
+.d        foo/
+.f        foo/config1
+>f..t.... foo/config2
+hf        foo/extra
+.L        foo/sym -> ../bar/baz/rsync
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 5 failed"
+
+chmod 757 "$todir/foo/config1"
+touch "$todir/foo/config2"
+$RSYNC -vplrtH "$fromdir/" "$todir/" \
+    | tee "$outfile"
+filter_outfile
+cat <<EOT >"$chkfile"
+foo/config2
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 6 failed"
+
+chmod 757 "$todir/foo/config1"
+touch "$todir/foo/config2"
+$RSYNC -iplrtH "$fromdir/" "$todir/" \
+    | tee "$outfile"
+cat <<EOT >"$chkfile"
+.f...p... foo/config1
+>f..t.... foo/config2
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 7 failed"
+
+mv "$todir" "$lddir"
+$RSYNC -ivvplrtH --copy-dest="$lddir" "$fromdir/" "$todir/" \
+    | tee "$outfile"
+filter_outfile
+cat <<EOT >"$chkfile"
+.d..t.... ./
+cd+++++++ bar/
+cd+++++++ bar/baz/
+cf....... bar/baz/rsync
+cd+++++++ foo/
+cf....... foo/config1
+cf....... foo/config2
+hf+++++++ foo/extra => foo/config1
+cL+++++++ foo/sym -> ../bar/baz/rsync
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 8 failed"
+
+rm -rf "$todir"
+$RSYNC -iplrtH --link-dest="$lddir" "$fromdir/" "$todir/" \
+    | tee "$outfile"
+cat <<EOT >"$chkfile"
+.d..t.... ./
+cd+++++++ bar/
+cd+++++++ bar/baz/
+cd+++++++ foo/
+hf+++++++ foo/extra => foo/config1
+cL+++++++ foo/sym -> ../bar/baz/rsync
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 9 failed"
+
+# The script would have aborted on error, so getting here means we've won.
+exit 0

testsuite/relative.test

@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# Copyright (C) 2005 by Wayne Davison <wayned@samba.org>
+#
+# This program is distributable under the terms of the GNU GPL (see COPYING)
+
+. "$suitedir/rsync.fns"
+
+deepstr='down/3/deep'
+deepdir="$fromdir/$deepstr"
+mkdir -p "$deepdir"
+fromdir="$deepdir"
+hands_setup
+fromdir="$tmpdir/from"
+
+outfile="$scratchdir/rsync.out"
+
+cd "$fromdir"
+
+# Main script starts here
+
+echo "$fromdir"
+runtest "basic relative" 'checkit "$RSYNC -avR ./$deepstr \"$todir\"" "$fromdir/" "$todir"'
+
+ln "$deepdir/filelist" "$deepdir/dir"
+runtest "hard links" 'checkit "$RSYNC -avHR ./$deepstr/ \"$todir\"" "$fromdir/" "$todir"'
+
+cp "$deepdir/text" "$todir/$deepstr/ThisShouldGo"
+cp "$deepdir/text" "$todir/$deepstr/dir/ThisShouldGoToo"
+runtest "deletion" 'checkit "$RSYNC -avHR --delete ./$deepstr/ \"$todir\"" "$fromdir/" "$todir"'
+
+runtest "non-deletion" 'checkit "$RSYNC -aiHR --delete ./$deepstr/ \"$todir\"" "$fromdir/" "$todir"' \
+    | tee "$outfile"
+
+# Make sure no files were deleted
+grep 'deleting ' "$outfile" && test_fail "Erroneous deletions occurred!"
+
+# The script would have aborted on error, so getting here means we've won.
+exit 0

testsuite/rsync.fns

@@ -92,7 +92,7 @@ hands_setup() {
     ln -s nolf "$fromdir/nolf-symlink"
     umask 022
 
-    cat $srcdir/*.c > "$fromdir/text"
+    cat "$srcdir"/*.c > "$fromdir/text"
     mkdir "$fromdir/dir"
     cp "$fromdir/text" "$fromdir/dir"
     mkdir "$fromdir/dir/subdir"

util.c

@@ -120,7 +120,7 @@ void out_of_memory(char *str)
 	exit_cleanup(RERR_MALLOC);
 }
 
-void overflow(char *str)
+void overflow_exit(char *str)
 {
 	rprintf(FERROR, "ERROR: buffer overflow in %s\n", str);
 	exit_cleanup(RERR_MALLOC);
@@ -128,8 +128,13 @@ void overflow(char *str)
 
 
 
-int set_modtime(char *fname, time_t modtime)
+int set_modtime(char *fname, time_t modtime, mode_t mode)
 {
+#if !defined HAVE_LUTIMES || !defined HAVE_UTIMES
+	if (S_ISLNK(mode))
+		return 1;
+#endif
+
 	if (verbose > 2) {
 		rprintf(FINFO, "set modtime of %s to (%ld) %s",
 			safe_fname(fname), (long)modtime,
@@ -140,7 +145,18 @@ int set_modtime(char *fname, time_t modtime)
 		return 0;
 
 	{
-#ifdef HAVE_UTIMBUF
+#ifdef HAVE_UTIMES
+		struct timeval t[2];
+		t[0].tv_sec = time(NULL);
+		t[0].tv_usec = 0;
+		t[1].tv_sec = modtime;
+		t[1].tv_usec = 0;
+# ifdef HAVE_LUTIMES
+		if (S_ISLNK(mode))
+			return lutimes(fname, t);
+# endif
+		return utimes(fname, t);
+#elif defined HAVE_UTIMBUF
 		struct utimbuf tbuf;
 		tbuf.actime = time(NULL);
 		tbuf.modtime = modtime;
@@ -151,12 +167,7 @@ int set_modtime(char *fname, time_t modtime)
 		t[1] = modtime;
 		return utime(fname,t);
 #else
-		struct timeval t[2];
-		t[0].tv_sec = time(NULL);
-		t[0].tv_usec = 0;
-		t[1].tv_sec = modtime;
-		t[1].tv_usec = 0;
-		return utimes(fname,t);
+#error No file-time-modification routine found!
 #endif
 	}
 }
@@ -877,11 +888,12 @@ int pop_dir(char *dir)
 	return 1;
 }
 
-/* Return the filename, turning any non-printable characters into '?'s.
- * This ensures that outputting it on a line of its own cannot generate an
- * empty line.  This function can return only MAX_SAFE_NAMES values at a
- * time!  The returned value can be longer than MAXPATHLEN (because we
- * may be trying to output an error about a too-long filename)! */
+/* Return the filename, turning any non-printable characters into escaped
+ * characters (e.g. \n -> \012, \ -> \\).  This ensures that outputting it
+ * cannot generate an empty line nor corrupt the screen.  This function can
+ * return only MAX_SAFE_NAMES values at a time!  The returned value can be
+ * longer than MAXPATHLEN (because we may be trying to output an error about
+ * a too-long filename)! */
 char *safe_fname(const char *fname)
 {
 #define MAX_SAFE_NAMES 4
@@ -892,12 +904,21 @@ char *safe_fname(const char *fname)
 
 	ndx = (ndx + 1) % MAX_SAFE_NAMES;
 	for (t = fbuf[ndx]; *fname; fname++) {
-		if (!isprint(*(uchar*)fname))
-			*t++ = '?';
-		else
+		if (*fname == '\\') {
+			if ((limit -= 2) < 0)
+				break;
+			*t++ = '\\';
+			*t++ = '\\';
+		} else if (!isprint(*(uchar*)fname)) {
+			if ((limit -= 4) < 0)
+				break;
+			sprintf(t, "\\%03o", *(uchar*)fname);
+			t += 4;
+		} else {
+			if (--limit < 0)
+				break;
 			*t++ = *fname;
-		if (--limit == 0)
-			break;
+		}
 	}
 	*t = '\0';
 

zlib/ChangeLog

@@ -1,5 +1,379 @@
 
-		ChangeLog file for zlib
+                ChangeLog file for zlib
+
+Changes in 1.2.3 (18 July 2005)
+- Apply security vulnerability fixes to contrib/infback9 as well
+- Clean up some text files (carriage returns, trailing space)
+- Update testzlib, vstudio, masmx64, and masmx86 in contrib [Vollant]
+
+Changes in 1.2.2.4 (11 July 2005)
+- Add inflatePrime() function for starting inflation at bit boundary
+- Avoid some Visual C warnings in deflate.c
+- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit
+  compile
+- Fix some spelling errors in comments [Betts]
+- Correct inflateInit2() error return documentation in zlib.h
+- Added zran.c example of compressed data random access to examples
+  directory, shows use of inflatePrime()
+- Fix cast for assignments to strm->state in inflate.c and infback.c
+- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer]
+- Move declarations of gf2 functions to right place in crc32.c [Oberhumer]
+- Add cast in trees.c t avoid a warning [Oberhumer]
+- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer]
+- Update make_vms.com [Zinser]
+- Initialize state->write in inflateReset() since copied in inflate_fast()
+- Be more strict on incomplete code sets in inflate_table() and increase
+  ENOUGH and MAXD -- this repairs a possible security vulnerability for
+  invalid inflate input.  Thanks to Tavis Ormandy and Markus Oberhumer for
+  discovering the vulnerability and providing test cases.
+- Add ia64 support to configure for HP-UX [Smith]
+- Add error return to gzread() for format or i/o error [Levin]
+- Use malloc.h for OS/2 [Necasek]
+
+Changes in 1.2.2.3 (27 May 2005)
+- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile
+- Typecast fread() return values in gzio.c [Vollant]
+- Remove trailing space in minigzip.c outmode (VC++ can't deal with it)
+- Fix crc check bug in gzread() after gzungetc() [Heiner]
+- Add the deflateTune() function to adjust internal compression parameters
+- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack)
+- Remove an incorrect assertion in examples/zpipe.c
+- Add C++ wrapper in infback9.h [Donais]
+- Fix bug in inflateCopy() when decoding fixed codes
+- Note in zlib.h how much deflateSetDictionary() actually uses
+- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used)
+- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer]
+- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer]
+- Add gzdirect() function to indicate transparent reads
+- Update contrib/minizip [Vollant]
+- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer]
+- Add casts in crc32.c to avoid warnings [Oberhumer]
+- Add contrib/masmx64 [Vollant]
+- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant]
+
+Changes in 1.2.2.2 (30 December 2004)
+- Replace structure assignments in deflate.c and inflate.c with zmemcpy to
+  avoid implicit memcpy calls (portability for no-library compilation)
+- Increase sprintf() buffer size in gzdopen() to allow for large numbers
+- Add INFLATE_STRICT to check distances against zlib header
+- Improve WinCE errno handling and comments [Chang]
+- Remove comment about no gzip header processing in FAQ
+- Add Z_FIXED strategy option to deflateInit2() to force fixed trees
+- Add updated make_vms.com [Coghlan], update README
+- Create a new "examples" directory, move gzappend.c there, add zpipe.c,
+  fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html.
+- Add FAQ entry and comments in deflate.c on uninitialized memory access
+- Add Solaris 9 make options in configure [Gilbert]
+- Allow strerror() usage in gzio.c for STDC
+- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer]
+- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant]
+- Use z_off_t for adler32_combine() and crc32_combine() lengths
+- Make adler32() much faster for small len
+- Use OS_CODE in deflate() default gzip header
+
+Changes in 1.2.2.1 (31 October 2004)
+- Allow inflateSetDictionary() call for raw inflate
+- Fix inflate header crc check bug for file names and comments
+- Add deflateSetHeader() and gz_header structure for custom gzip headers
+- Add inflateGetheader() to retrieve gzip headers
+- Add crc32_combine() and adler32_combine() functions
+- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list
+- Use zstreamp consistently in zlib.h (inflate_back functions)
+- Remove GUNZIP condition from definition of inflate_mode in inflate.h
+  and in contrib/inflate86/inffast.S [Truta, Anderson]
+- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson]
+- Update projects/README.projects and projects/visualc6 [Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta]
+- Deprecate Z_ASCII; use Z_TEXT instead [Truta]
+- Use a new algorithm for setting strm->data_type in trees.c [Truta]
+- Do not define an exit() prototype in zutil.c unless DEBUG defined
+- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta]
+- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate()
+- Fix Darwin build version identification [Peterson]
+
+Changes in 1.2.2 (3 October 2004)
+- Update zlib.h comments on gzip in-memory processing
+- Set adler to 1 in inflateReset() to support Java test suite [Walles]
+- Add contrib/dotzlib [Ravn]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update contrib/minizip [Vollant]
+- Move contrib/visual-basic.txt to old/ [Truta]
+- Fix assembler builds in projects/visualc6/ [Truta]
+
+Changes in 1.2.1.2 (9 September 2004)
+- Update INDEX file
+- Fix trees.c to update strm->data_type (no one ever noticed!)
+- Fix bug in error case in inflate.c, infback.c, and infback9.c [Brown]
+- Add "volatile" to crc table flag declaration (for DYNAMIC_CRC_TABLE)
+- Add limited multitasking protection to DYNAMIC_CRC_TABLE
+- Add NO_vsnprintf for VMS in zutil.h [Mozilla]
+- Don't declare strerror() under VMS [Mozilla]
+- Add comment to DYNAMIC_CRC_TABLE to use get_crc_table() to initialize
+- Update contrib/ada [Anisimkov]
+- Update contrib/minizip [Vollant]
+- Fix configure to not hardcode directories for Darwin [Peterson]
+- Fix gzio.c to not return error on empty files [Brown]
+- Fix indentation; update version in contrib/delphi/ZLib.pas and
+  contrib/pascal/zlibpas.pas [Truta]
+- Update mkasm.bat in contrib/masmx86 [Truta]
+- Update contrib/untgz [Truta]
+- Add projects/README.projects [Truta]
+- Add project for MS Visual C++ 6.0 in projects/visualc6 [Cadieux, Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update list of Z_PREFIX symbols in zconf.h [Randers-Pehrson, Truta]
+- Remove an unnecessary assignment to curr in inftrees.c [Truta]
+- Add OS/2 to exe builds in configure [Poltorak]
+- Remove err dummy parameter in zlib.h [Kientzle]
+
+Changes in 1.2.1.1 (9 January 2004)
+- Update email address in README
+- Several FAQ updates
+- Fix a big fat bug in inftrees.c that prevented decoding valid
+  dynamic blocks with only literals and no distance codes --
+  Thanks to "Hot Emu" for the bug report and sample file
+- Add a note to puff.c on no distance codes case.
+
+Changes in 1.2.1 (17 November 2003)
+- Remove a tab in contrib/gzappend/gzappend.c
+- Update some interfaces in contrib for new zlib functions
+- Update zlib version number in some contrib entries
+- Add Windows CE definition for ptrdiff_t in zutil.h [Mai, Truta]
+- Support shared libraries on Hurd and KFreeBSD [Brown]
+- Fix error in NO_DIVIDE option of adler32.c
+
+Changes in 1.2.0.8 (4 November 2003)
+- Update version in contrib/delphi/ZLib.pas and contrib/pascal/zlibpas.pas
+- Add experimental NO_DIVIDE #define in adler32.c
+    - Possibly faster on some processors (let me know if it is)
+- Correct Z_BLOCK to not return on first inflate call if no wrap
+- Fix strm->data_type on inflate() return to correctly indicate EOB
+- Add deflatePrime() function for appending in the middle of a byte
+- Add contrib/gzappend for an example of appending to a stream
+- Update win32/DLL_FAQ.txt [Truta]
+- Delete Turbo C comment in README [Truta]
+- Improve some indentation in zconf.h [Truta]
+- Fix infinite loop on bad input in configure script [Church]
+- Fix gzeof() for concatenated gzip files [Johnson]
+- Add example to contrib/visual-basic.txt [Michael B.]
+- Add -p to mkdir's in Makefile.in [vda]
+- Fix configure to properly detect presence or lack of printf functions
+- Add AS400 support [Monnerat]
+- Add a little Cygwin support [Wilson]
+
+Changes in 1.2.0.7 (21 September 2003)
+- Correct some debug formats in contrib/infback9
+- Cast a type in a debug statement in trees.c
+- Change search and replace delimiter in configure from % to # [Beebe]
+- Update contrib/untgz to 0.2 with various fixes [Truta]
+- Add build support for Amiga [Nikl]
+- Remove some directories in old that have been updated to 1.2
+- Add dylib building for Mac OS X in configure and Makefile.in
+- Remove old distribution stuff from Makefile
+- Update README to point to DLL_FAQ.txt, and add comment on Mac OS X
+- Update links in README
+
+Changes in 1.2.0.6 (13 September 2003)
+- Minor FAQ updates
+- Update contrib/minizip to 1.00 [Vollant]
+- Remove test of gz functions in example.c when GZ_COMPRESS defined [Truta]
+- Update POSTINC comment for 68060 [Nikl]
+- Add contrib/infback9 with deflate64 decoding (unsupported)
+- For MVS define NO_vsnprintf and undefine FAR [van Burik]
+- Add pragma for fdopen on MVS [van Burik]
+
+Changes in 1.2.0.5 (8 September 2003)
+- Add OF to inflateBackEnd() declaration in zlib.h
+- Remember start when using gzdopen in the middle of a file
+- Use internal off_t counters in gz* functions to properly handle seeks
+- Perform more rigorous check for distance-too-far in inffast.c
+- Add Z_BLOCK flush option to return from inflate at block boundary
+- Set strm->data_type on return from inflate
+    - Indicate bits unused, if at block boundary, and if in last block
+- Replace size_t with ptrdiff_t in crc32.c, and check for correct size
+- Add condition so old NO_DEFLATE define still works for compatibility
+- FAQ update regarding the Windows DLL [Truta]
+- INDEX update: add qnx entry, remove aix entry [Truta]
+- Install zlib.3 into mandir [Wilson]
+- Move contrib/zlib_dll_FAQ.txt to win32/DLL_FAQ.txt; update [Truta]
+- Adapt the zlib interface to the new DLL convention guidelines [Truta]
+- Introduce ZLIB_WINAPI macro to allow the export of functions using
+  the WINAPI calling convention, for Visual Basic [Vollant, Truta]
+- Update msdos and win32 scripts and makefiles [Truta]
+- Export symbols by name, not by ordinal, in win32/zlib.def [Truta]
+- Add contrib/ada [Anisimkov]
+- Move asm files from contrib/vstudio/vc70_32 to contrib/asm386 [Truta]
+- Rename contrib/asm386 to contrib/masmx86 [Truta, Vollant]
+- Add contrib/masm686 [Truta]
+- Fix offsets in contrib/inflate86 and contrib/masmx86/inffas32.asm
+  [Truta, Vollant]
+- Update contrib/delphi; rename to contrib/pascal; add example [Truta]
+- Remove contrib/delphi2; add a new contrib/delphi [Truta]
+- Avoid inclusion of the nonstandard <memory.h> in contrib/iostream,
+  and fix some method prototypes [Truta]
+- Fix the ZCR_SEED2 constant to avoid warnings in contrib/minizip
+  [Truta]
+- Avoid the use of backslash (\) in contrib/minizip [Vollant]
+- Fix file time handling in contrib/untgz; update makefiles [Truta]
+- Update contrib/vstudio/vc70_32 to comply with the new DLL guidelines
+  [Vollant]
+- Remove contrib/vstudio/vc15_16 [Vollant]
+- Rename contrib/vstudio/vc70_32 to contrib/vstudio/vc7 [Truta]
+- Update README.contrib [Truta]
+- Invert the assignment order of match_head and s->prev[...] in
+  INSERT_STRING [Truta]
+- Compare TOO_FAR with 32767 instead of 32768, to avoid 16-bit warnings
+  [Truta]
+- Compare function pointers with 0, not with NULL or Z_NULL [Truta]
+- Fix prototype of syncsearch in inflate.c [Truta]
+- Introduce ASMINF macro to be enabled when using an ASM implementation
+  of inflate_fast [Truta]
+- Change NO_DEFLATE to NO_GZCOMPRESS [Truta]
+- Modify test_gzio in example.c to take a single file name as a
+  parameter [Truta]
+- Exit the example.c program if gzopen fails [Truta]
+- Add type casts around strlen in example.c [Truta]
+- Remove casting to sizeof in minigzip.c; give a proper type
+  to the variable compared with SUFFIX_LEN [Truta]
+- Update definitions of STDC and STDC99 in zconf.h [Truta]
+- Synchronize zconf.h with the new Windows DLL interface [Truta]
+- Use SYS16BIT instead of __32BIT__ to distinguish between
+  16- and 32-bit platforms [Truta]
+- Use far memory allocators in small 16-bit memory models for
+  Turbo C [Truta]
+- Add info about the use of ASMV, ASMINF and ZLIB_WINAPI in
+  zlibCompileFlags [Truta]
+- Cygwin has vsnprintf [Wilson]
+- In Windows16, OS_CODE is 0, as in MSDOS [Truta]
+- In Cygwin, OS_CODE is 3 (Unix), not 11 (Windows32) [Wilson]
+
+Changes in 1.2.0.4 (10 August 2003)
+- Minor FAQ updates
+- Be more strict when checking inflateInit2's windowBits parameter
+- Change NO_GUNZIP compile option to NO_GZIP to cover deflate as well
+- Add gzip wrapper option to deflateInit2 using windowBits
+- Add updated QNX rule in configure and qnx directory [Bonnefoy]
+- Make inflate distance-too-far checks more rigorous
+- Clean up FAR usage in inflate
+- Add casting to sizeof() in gzio.c and minigzip.c
+
+Changes in 1.2.0.3 (19 July 2003)
+- Fix silly error in gzungetc() implementation [Vollant]
+- Update contrib/minizip and contrib/vstudio [Vollant]
+- Fix printf format in example.c
+- Correct cdecl support in zconf.in.h [Anisimkov]
+- Minor FAQ updates
+
+Changes in 1.2.0.2 (13 July 2003)
+- Add ZLIB_VERNUM in zlib.h for numerical preprocessor comparisons
+- Attempt to avoid warnings in crc32.c for pointer-int conversion
+- Add AIX to configure, remove aix directory [Bakker]
+- Add some casts to minigzip.c
+- Improve checking after insecure sprintf() or vsprintf() calls
+- Remove #elif's from crc32.c
+- Change leave label to inf_leave in inflate.c and infback.c to avoid
+  library conflicts
+- Remove inflate gzip decoding by default--only enable gzip decoding by
+  special request for stricter backward compatibility
+- Add zlibCompileFlags() function to return compilation information
+- More typecasting in deflate.c to avoid warnings
+- Remove leading underscore from _Capital #defines [Truta]
+- Fix configure to link shared library when testing
+- Add some Windows CE target adjustments [Mai]
+- Remove #define ZLIB_DLL in zconf.h [Vollant]
+- Add zlib.3 [Rodgers]
+- Update RFC URL in deflate.c and algorithm.txt [Mai]
+- Add zlib_dll_FAQ.txt to contrib [Truta]
+- Add UL to some constants [Truta]
+- Update minizip and vstudio [Vollant]
+- Remove vestigial NEED_DUMMY_RETURN from zconf.in.h
+- Expand use of NO_DUMMY_DECL to avoid all dummy structures
+- Added iostream3 to contrib [Schwardt]
+- Replace rewind() with fseek() for WinCE [Truta]
+- Improve setting of zlib format compression level flags
+    - Report 0 for huffman and rle strategies and for level == 0 or 1
+    - Report 2 only for level == 6
+- Only deal with 64K limit when necessary at compile time [Truta]
+- Allow TOO_FAR check to be turned off at compile time [Truta]
+- Add gzclearerr() function [Souza]
+- Add gzungetc() function
+
+Changes in 1.2.0.1 (17 March 2003)
+- Add Z_RLE strategy for run-length encoding [Truta]
+    - When Z_RLE requested, restrict matches to distance one
+    - Update zlib.h, minigzip.c, gzopen(), gzdopen() for Z_RLE
+- Correct FASTEST compilation to allow level == 0
+- Clean up what gets compiled for FASTEST
+- Incorporate changes to zconf.in.h [Vollant]
+    - Refine detection of Turbo C need for dummy returns
+    - Refine ZLIB_DLL compilation
+    - Include additional header file on VMS for off_t typedef
+- Try to use _vsnprintf where it supplants vsprintf [Vollant]
+- Add some casts in inffast.c
+- Enchance comments in zlib.h on what happens if gzprintf() tries to
+  write more than 4095 bytes before compression
+- Remove unused state from inflateBackEnd()
+- Remove exit(0) from minigzip.c, example.c
+- Get rid of all those darn tabs
+- Add "check" target to Makefile.in that does the same thing as "test"
+- Add "mostlyclean" and "maintainer-clean" targets to Makefile.in
+- Update contrib/inflate86 [Anderson]
+- Update contrib/testzlib, contrib/vstudio, contrib/minizip [Vollant]
+- Add msdos and win32 directories with makefiles [Truta]
+- More additions and improvements to the FAQ
+
+Changes in 1.2.0 (9 March 2003)
+- New and improved inflate code
+    - About 20% faster
+    - Does not allocate 32K window unless and until needed
+    - Automatically detects and decompresses gzip streams
+    - Raw inflate no longer needs an extra dummy byte at end
+    - Added inflateBack functions using a callback interface--even faster
+      than inflate, useful for file utilities (gzip, zip)
+    - Added inflateCopy() function to record state for random access on
+      externally generated deflate streams (e.g. in gzip files)
+    - More readable code (I hope)
+- New and improved crc32()
+    - About 50% faster, thanks to suggestions from Rodney Brown
+- Add deflateBound() and compressBound() functions
+- Fix memory leak in deflateInit2()
+- Permit setting dictionary for raw deflate (for parallel deflate)
+- Fix const declaration for gzwrite()
+- Check for some malloc() failures in gzio.c
+- Fix bug in gzopen() on single-byte file 0x1f
+- Fix bug in gzread() on concatenated file with 0x1f at end of buffer
+  and next buffer doesn't start with 0x8b
+- Fix uncompress() to return Z_DATA_ERROR on truncated input
+- Free memory at end of example.c
+- Remove MAX #define in trees.c (conflicted with some libraries)
+- Fix static const's in deflate.c, gzio.c, and zutil.[ch]
+- Declare malloc() and free() in gzio.c if STDC not defined
+- Use malloc() instead of calloc() in zutil.c if int big enough
+- Define STDC for AIX
+- Add aix/ with approach for compiling shared library on AIX
+- Add HP-UX support for shared libraries in configure
+- Add OpenUNIX support for shared libraries in configure
+- Use $cc instead of gcc to build shared library
+- Make prefix directory if needed when installing
+- Correct Macintosh avoidance of typedef Byte in zconf.h
+- Correct Turbo C memory allocation when under Linux
+- Use libz.a instead of -lz in Makefile (assure use of compiled library)
+- Update configure to check for snprintf or vsnprintf functions and their
+  return value, warn during make if using an insecure function
+- Fix configure problem with compile-time knowledge of HAVE_UNISTD_H that
+  is lost when library is used--resolution is to build new zconf.h
+- Documentation improvements (in zlib.h):
+    - Document raw deflate and inflate
+    - Update RFCs URL
+    - Point out that zlib and gzip formats are different
+    - Note that Z_BUF_ERROR is not fatal
+    - Document string limit for gzprintf() and possible buffer overflow
+    - Note requirement on avail_out when flushing
+    - Note permitted values of flush parameter of inflate()
+- Add some FAQs (and even answers) to the FAQ
+- Add contrib/inflate86/ for x86 faster inflate
+- Add contrib/blast/ for PKWare Data Compression Library decompression
+- Add contrib/puff/ simple inflate for deflate format description
 
 Changes in 1.1.4 (11 March 2002)
 - ZFREE was repeated on same allocation on some error conditions.
@@ -10,7 +384,7 @@ Changes in 1.1.4 (11 March 2002)
   less than 32K.
 - force windowBits > 8 to avoid a bug in the encoder for a window size
   of 256 bytes. (A complete fix will be available in 1.1.5).
-	
+
 Changes in 1.1.3 (9 July 1998)
 - fix "an inflate input buffer bug that shows up on rare but persistent
   occasions" (Mark)
@@ -166,7 +540,7 @@ Changes in 1.0.7 (20 Jan 1998)
 Changes in 1.0.6 (19 Jan 1998)
 - add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
   gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
-- Fix a deflate bug occuring only with compression level 0 (thanks to
+- Fix a deflate bug occurring only with compression level 0 (thanks to
   Andy Buckler for finding this one).
 - In minigzip, pass transparently also the first byte for .Z files.
 - return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
@@ -184,13 +558,13 @@ Changes in 1.0.6 (19 Jan 1998)
 - added Makefile.nt (thanks to Stephen Williams)
 - added the unsupported "contrib" directory:
    contrib/asm386/ by Gilles Vollant <info@winimage.com>
-	386 asm code replacing longest_match().
+        386 asm code replacing longest_match().
    contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
         A C++ I/O streams interface to the zlib gz* functions
    contrib/iostream2/  by Tyge L<>vset <Tyge.Lovset@cmr.no>
-	Another C++ I/O streams interface
+        Another C++ I/O streams interface
    contrib/untgz/  by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
-	A very simple tar.gz file extractor using zlib
+        A very simple tar.gz file extractor using zlib
    contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
         How to use compress(), uncompress() and the gz* functions from VB.
 - pass params -f (filtered data), -h (huffman only), -1 to -9 (compression
@@ -217,7 +591,7 @@ Changes in 1.0.6 (19 Jan 1998)
 - add NEED_DUMMY_RETURN for Borland
 - use variable z_verbose for tracing in debug mode (L. Peter Deutsch).
 - allow compilation with CC
-- defined STDC for OS/2 (David Charlap)	
+- defined STDC for OS/2 (David Charlap)
 - limit external names to 8 chars for MVS (Thomas Lund)
 - in minigzip.c, use static buffers only for 16-bit systems
 - fix suffix check for "minigzip -d foo.gz"
@@ -242,7 +616,7 @@ Changes in 1.0.5 (3 Jan 98)
 - Eliminate memory leaks on error conditions in inflate
 - Removed some vestigial code in inflate
 - Update web address in README
-  
+
 Changes in 1.0.4 (24 Jul 96)
 - In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF
   bit, so the decompressor could decompress all the correct data but went

zlib/Makefile

@@ -1,175 +0,0 @@
-# Makefile for zlib
-# Copyright (C) 1995-2002 Jean-loup Gailly.
-# For conditions of distribution and use, see copyright notice in zlib.h 
-
-# To compile and test, type:
-#   ./configure; make test
-# The call of configure is optional if you don't have special requirements
-# If you wish to build zlib as a shared library, use: ./configure -s
-
-# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
-#    make install
-# To install in $HOME instead of /usr/local, use:
-#    make install prefix=$HOME
-
-CC=cc
-
-CFLAGS=-O
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-g -DDEBUG
-#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
-#           -Wstrict-prototypes -Wmissing-prototypes
-
-LDFLAGS=-L. -lz
-LDSHARED=$(CC)
-CPP=$(CC) -E
-
-VER=1.1.4
-LIBS=libz.a
-SHAREDLIB=libz.so
-
-AR=ar rc
-RANLIB=ranlib
-TAR=tar
-SHELL=/bin/sh
-
-prefix = /usr/local
-exec_prefix = ${prefix}
-libdir = ${exec_prefix}/lib
-includedir = ${prefix}/include
-
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
-
-OBJA =
-# to use the asm code: make OBJA=match.o
-
-TEST_OBJS = example.o minigzip.o
-
-DISTFILES = README FAQ INDEX ChangeLog configure Make*[a-z0-9] *.[ch] *.mms \
-  algorithm.txt zlib.3 zlib.html \
-  msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
-  nt/Make*[a-z0-9] nt/zlib.dnt amiga/Make*.??? os2/M*.os2 os2/zlib.def \
-  contrib/RE*.contrib contrib/*.txt contrib/asm386/*.asm contrib/asm386/*.c \
-  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/asm[56]86/*.?86 \
-  contrib/asm[56]86/*.S contrib/iostream/*.cpp \
-  contrib/iostream/*.h  contrib/iostream2/*.h contrib/iostream2/*.cpp \
-  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32 \
-  contrib/minizip/[CM]*[pe] contrib/minizip/*.[ch] contrib/minizip/*.[td]?? \
-  contrib/delphi*/*.???
-
-all: example minigzip
-
-test: all
-	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
-	echo hello world | ./minigzip | ./minigzip -d || \
-	  echo '		*** minigzip test FAILED ***' ; \
-	if ./example; then \
-	  echo '		*** zlib test OK ***'; \
-	else \
-	  echo '		*** zlib test FAILED ***'; \
-	fi
-
-libz.a: $(OBJS) $(OBJA)
-	$(AR) $@ $(OBJS) $(OBJA)
-	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
-
-match.o: match.S
-	$(CPP) match.S > _match.s
-	$(CC) -c _match.s
-	mv _match.o match.o
-	rm -f _match.s
-
-$(SHAREDLIB).$(VER): $(OBJS)
-	$(LDSHARED) -o $@ $(OBJS)
-	rm -f $(SHAREDLIB) $(SHAREDLIB).1
-	ln -s $@ $(SHAREDLIB)
-	ln -s $@ $(SHAREDLIB).1
-
-example: example.o $(LIBS)
-	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
-
-minigzip: minigzip.o $(LIBS)
-	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
-
-install: $(LIBS)
-	-@if [ ! -d $(includedir)  ]; then mkdir $(includedir); fi
-	-@if [ ! -d $(libdir) ]; then mkdir $(libdir); fi
-	cp zlib.h zconf.h $(includedir)
-	chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
-	cp $(LIBS) $(libdir)
-	cd $(libdir); chmod 755 $(LIBS)
-	-@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
-	cd $(libdir); if test -f $(SHAREDLIB).$(VER); then \
-	  rm -f $(SHAREDLIB) $(SHAREDLIB).1; \
-	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB); \
-	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB).1; \
-	  (ldconfig || true)  >/dev/null 2>&1; \
-	fi
-# The ranlib in install is needed on NeXTSTEP which checks file times
-# ldconfig is for Linux
-
-uninstall:
-	cd $(includedir); \
-	v=$(VER); \
-	if test -f zlib.h; then \
-	  v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`; \
-          rm -f zlib.h zconf.h; \
-	fi; \
-	cd $(libdir); rm -f libz.a; \
-	if test -f $(SHAREDLIB).$$v; then \
-	  rm -f $(SHAREDLIB).$$v $(SHAREDLIB) $(SHAREDLIB).1; \
-	fi
-
-clean:
-	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz so_locations \
-	   _match.s maketree
-
-distclean:	clean
-
-zip:
-	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	rm -f test.c ztest*.c contrib/minizip/test.zip
-	v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
-	zip -ul9 zlib$$v $(DISTFILES)
-	mv Makefile~ Makefile
-
-dist:
-	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	rm -f test.c ztest*.c contrib/minizip/test.zip
-	d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
-	rm -f $$d.tar.gz; \
-	if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
-	files=""; \
-	for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \
-	cd ..; \
-	GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \
-	if test ! -d $$d; then rm -f $$d; fi
-	mv Makefile~ Makefile
-
-tags:	
-	etags *.[ch]
-
-depend:
-	makedepend -- $(CFLAGS) -- *.[ch]
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-adler32.o: zlib.h zconf.h
-compress.o: zlib.h zconf.h
-crc32.o: zlib.h zconf.h
-deflate.o: deflate.h zutil.h zlib.h zconf.h
-example.o: zlib.h zconf.h
-gzio.o: zutil.h zlib.h zconf.h
-infblock.o: infblock.h inftrees.h infcodes.h infutil.h zutil.h zlib.h zconf.h
-infcodes.o: zutil.h zlib.h zconf.h
-infcodes.o: inftrees.h infblock.h infcodes.h infutil.h inffast.h
-inffast.o: zutil.h zlib.h zconf.h inftrees.h
-inffast.o: infblock.h infcodes.h infutil.h inffast.h
-inflate.o: zutil.h zlib.h zconf.h infblock.h
-inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
-minigzip.o:  zlib.h zconf.h 
-trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
-uncompr.o: zlib.h zconf.h
-zutil.o: zutil.h zlib.h zconf.h  

zlib/README

@@ -1,110 +1,86 @@
-zlib 1.1.4 is a general purpose data compression library.  All the code
-is thread safe.  The data format used by the zlib library
-is described by RFCs (Request for Comments) 1950 to 1952 in the files 
-http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate
-format) and rfc1952.txt (gzip format). These documents are also available in
-other formats from ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
+ZLIB DATA COMPRESSION LIBRARY
+
+zlib 1.2.3 is a general purpose data compression library.  All the code is
+thread safe.  The data format used by the zlib library is described by RFCs
+(Request for Comments) 1950 to 1952 in the files
+http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
+and rfc1952.txt (gzip format). These documents are also available in other
+formats from ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
 
 All functions of the compression library are documented in the file zlib.h
-(volunteer to write man pages welcome, contact jloup@gzip.org). A usage
-example of the library is given in the file example.c which also tests that
-the library is working correctly. Another example is given in the file
-minigzip.c. The compression library itself is composed of all source files
-except example.c and minigzip.c.
+(volunteer to write man pages welcome, contact zlib@gzip.org). A usage example
+of the library is given in the file example.c which also tests that the library
+is working correctly. Another example is given in the file minigzip.c. The
+compression library itself is composed of all source files except example.c and
+minigzip.c.
 
-To compile all files and run the test program, follow the instructions
-given at the top of Makefile. In short "make test; make install"
-should work for most machines. For Unix: "./configure; make test; make install"
-For MSDOS, use one of the special makefiles such as Makefile.msc.
-For VMS, use Make_vms.com or descrip.mms.
+To compile all files and run the test program, follow the instructions given at
+the top of Makefile. In short "make test; make install" should work for most
+machines. For Unix: "./configure; make test; make install". For MSDOS, use one
+of the special makefiles such as Makefile.msc. For VMS, use make_vms.com.
 
-Questions about zlib should be sent to <zlib@gzip.org>, or to
-Gilles Vollant <info@winimage.com> for the Windows DLL version.
-The zlib home page is http://www.zlib.org or http://www.gzip.org/zlib/
-Before reporting a problem, please check this site to verify that
-you have the latest version of zlib; otherwise get the latest version and
-check whether the problem still exists or not.
+Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant
+<info@winimage.com> for the Windows DLL version. The zlib home page is
+http://www.zlib.org or http://www.gzip.org/zlib/ Before reporting a problem,
+please check this site to verify that you have the latest version of zlib;
+otherwise get the latest version and check whether the problem still exists or
+not.
 
-PLEASE read the zlib FAQ http://www.gzip.org/zlib/zlib_faq.html
-before asking for help.
+PLEASE read the zlib FAQ http://www.gzip.org/zlib/zlib_faq.html before asking
+for help.
 
 Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan. 1997
 issue of  Dr. Dobb's Journal; a copy of the article is available in
 http://dogma.net/markn/articles/zlibtool/zlibtool.htm
 
-The changes made in version 1.1.4 are documented in the file ChangeLog.
-The only changes made since 1.1.3 are bug corrections:
-
-- ZFREE was repeated on same allocation on some error conditions.
-  This creates a security problem described in
-  http://www.zlib.org/advisory-2002-03-11.txt
-- Returned incorrect error (Z_MEM_ERROR) on some invalid data
-- Avoid accesses before window for invalid distances with inflate window
-  less than 32K.
-- force windowBits > 8 to avoid a bug in the encoder for a window size
-  of 256 bytes. (A complete fix will be available in 1.1.5).
-
-The beta version 1.1.5beta includes many more changes. A new official
-version 1.1.5 will be released as soon as extensive testing has been
-completed on it.
-
+The changes made in version 1.2.3 are documented in the file ChangeLog.
 
 Unsupported third party contributions are provided in directory "contrib".
 
 A Java implementation of zlib is available in the Java Development Kit
-http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html
+http://java.sun.com/j2se/1.4.2/docs/api/java/util/zip/package-summary.html
 See the zlib home page http://www.zlib.org for details.
 
-A Perl interface to zlib written by Paul Marquess <pmarquess@bfsec.bt.co.uk>
-is in the CPAN (Comprehensive Perl Archive Network) sites
+A Perl interface to zlib written by Paul Marquess <pmqs@cpan.org> is in the
+CPAN (Comprehensive Perl Archive Network) sites
 http://www.cpan.org/modules/by-module/Compress/
 
-A Python interface to zlib written by A.M. Kuchling <amk@magnet.com>
-is available in Python 1.5 and later versions, see
+A Python interface to zlib written by A.M. Kuchling <amk@amk.ca> is
+available in Python 1.5 and later versions, see
 http://www.python.org/doc/lib/module-zlib.html
 
-A zlib binding for TCL written by Andreas Kupries <a.kupries@westend.com>
-is availlable at http://www.westend.com/~kupries/doc/trf/man/man.html
+A zlib binding for TCL written by Andreas Kupries <a.kupries@westend.com> is
+availlable at http://www.oche.de/~akupries/soft/trf/trf_zip.html
 
-An experimental package to read and write files in .zip format,
-written on top of zlib by Gilles Vollant <info@winimage.com>, is
-available at http://www.winimage.com/zLibDll/unzip.html
-and also in the contrib/minizip directory of zlib.
+An experimental package to read and write files in .zip format, written on top
+of zlib by Gilles Vollant <info@winimage.com>, is available in the
+contrib/minizip directory of zlib.
 
 
 Notes for some targets:
 
-- To build a Windows DLL version, include in a DLL project zlib.def, zlib.rc
-  and all .c files except example.c and minigzip.c; compile with -DZLIB_DLL
-  The zlib DLL support was initially done by Alessandro Iacopetti and is
-  now maintained by Gilles Vollant <info@winimage.com>. Check the zlib DLL
-  home page at http://www.winimage.com/zLibDll
+- For Windows DLL versions, please see win32/DLL_FAQ.txt
 
-  From Visual Basic, you can call the DLL functions which do not take
-  a structure as argument: compress, uncompress and all gz* functions.
-  See contrib/visual-basic.txt for more information, or get
-  http://www.tcfb.com/dowseware/cmp-z-it.zip
+- For 64-bit Irix, deflate.c must be compiled without any optimization. With
+  -O, one libpng test fails. The test works in 32 bit mode (with the -n32
+  compiler flag). The compiler bug has been reported to SGI.
 
-- For 64-bit Irix, deflate.c must be compiled without any optimization.
-  With -O, one libpng test fails. The test works in 32 bit mode (with
-  the -n32 compiler flag). The compiler bug has been reported to SGI.
+- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1 it works
+  when compiled with cc.
 
-- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1   
-  it works when compiled with cc.
+- On Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1 is
+  necessary to get gzprintf working correctly. This is done by configure.
 
-- on Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1
-  is necessary to get gzprintf working correctly. This is done by configure.
-
-- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works
-  with other compilers. Use "make test" to check your compiler.
+- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works with
+  other compilers. Use "make test" to check your compiler.
 
 - gzdopen is not supported on RISCOS, BEOS and by some Mac compilers.
 
-- For Turbo C the small model is supported only with reduced performance to
-  avoid any far allocation; it was tested with -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
+- For PalmOs, see http://palmzlib.sourceforge.net/
 
-- For PalmOs, see http://www.cs.uit.no/~perm/PASTA/pilot/software.html
-  Per Harald Myrvang <perm@stud.cs.uit.no>
+- When building a shared, i.e. dynamic library on Mac OS X, the library must be
+  installed before testing (do "make install" before "make test"), since the
+  library location is specified in the library.
 
 
 Acknowledgments:
@@ -116,7 +92,7 @@ Acknowledgments:
 
 Copyright notice:
 
- (C) 1995-2002 Jean-loup Gailly and Mark Adler
+ (C) 1995-2004 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -144,4 +120,6 @@ entirely written by Jean-loup Gailly and Mark Adler; it does not
 include third-party code.
 
 If you redistribute modified sources, we would appreciate that you include
-in the file ChangeLog history information documenting your changes.
+in the file ChangeLog history information documenting your changes. Please
+read the FAQ for more information on the distribution of modified source
+versions.

zlib/adler32.c

@@ -1,48 +1,149 @@
 /* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
+ * Copyright (C) 1995-2004 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
 /* @(#) $Id$ */
 
+#define ZLIB_INTERNAL
 #include "zlib.h"
 
-#define BASE 65521L /* largest prime smaller than 65536 */
+#define BASE 65521UL    /* largest prime smaller than 65536 */
 #define NMAX 5552
 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
 
-#define DO1(buf,i)  {s1 += buf[i]; s2 += s1;}
+#define DO1(buf,i)  {adler += (buf)[i]; sum2 += adler;}
 #define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
 #define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
 #define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
 #define DO16(buf)   DO8(buf,0); DO8(buf,8);
 
+/* use NO_DIVIDE if your processor does not do division in hardware */
+#ifdef NO_DIVIDE
+#  define MOD(a) \
+    do { \
+        if (a >= (BASE << 16)) a -= (BASE << 16); \
+        if (a >= (BASE << 15)) a -= (BASE << 15); \
+        if (a >= (BASE << 14)) a -= (BASE << 14); \
+        if (a >= (BASE << 13)) a -= (BASE << 13); \
+        if (a >= (BASE << 12)) a -= (BASE << 12); \
+        if (a >= (BASE << 11)) a -= (BASE << 11); \
+        if (a >= (BASE << 10)) a -= (BASE << 10); \
+        if (a >= (BASE << 9)) a -= (BASE << 9); \
+        if (a >= (BASE << 8)) a -= (BASE << 8); \
+        if (a >= (BASE << 7)) a -= (BASE << 7); \
+        if (a >= (BASE << 6)) a -= (BASE << 6); \
+        if (a >= (BASE << 5)) a -= (BASE << 5); \
+        if (a >= (BASE << 4)) a -= (BASE << 4); \
+        if (a >= (BASE << 3)) a -= (BASE << 3); \
+        if (a >= (BASE << 2)) a -= (BASE << 2); \
+        if (a >= (BASE << 1)) a -= (BASE << 1); \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
+#  define MOD4(a) \
+    do { \
+        if (a >= (BASE << 4)) a -= (BASE << 4); \
+        if (a >= (BASE << 3)) a -= (BASE << 3); \
+        if (a >= (BASE << 2)) a -= (BASE << 2); \
+        if (a >= (BASE << 1)) a -= (BASE << 1); \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
+#else
+#  define MOD(a) a %= BASE
+#  define MOD4(a) a %= BASE
+#endif
+
 /* ========================================================================= */
 uLong ZEXPORT adler32(adler, buf, len)
     uLong adler;
     const Bytef *buf;
     uInt len;
 {
-    unsigned long s1 = adler & 0xffff;
-    unsigned long s2 = (adler >> 16) & 0xffff;
-    int k;
+    unsigned long sum2;
+    unsigned n;
 
-    if (buf == Z_NULL) return 1L;
+    /* split Adler-32 into component sums */
+    sum2 = (adler >> 16) & 0xffff;
+    adler &= 0xffff;
 
-    while (len > 0) {
-        k = len < NMAX ? len : NMAX;
-        len -= k;
-        while (k >= 16) {
-            DO16(buf);
-	    buf += 16;
-            k -= 16;
-        }
-        if (k != 0) do {
-            s1 += *buf++;
-	    s2 += s1;
-        } while (--k);
-        s1 %= BASE;
-        s2 %= BASE;
+    /* in case user likes doing a byte at a time, keep it fast */
+    if (len == 1) {
+        adler += buf[0];
+        if (adler >= BASE)
+            adler -= BASE;
+        sum2 += adler;
+        if (sum2 >= BASE)
+            sum2 -= BASE;
+        return adler | (sum2 << 16);
     }
-    return (s2 << 16) | s1;
+
+    /* initial Adler-32 value (deferred check for len == 1 speed) */
+    if (buf == Z_NULL)
+        return 1L;
+
+    /* in case short lengths are provided, keep it somewhat fast */
+    if (len < 16) {
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        if (adler >= BASE)
+            adler -= BASE;
+        MOD4(sum2);             /* only added so many BASE's */
+        return adler | (sum2 << 16);
+    }
+
+    /* do length NMAX blocks -- requires just one modulo operation */
+    while (len >= NMAX) {
+        len -= NMAX;
+        n = NMAX / 16;          /* NMAX is divisible by 16 */
+        do {
+            DO16(buf);          /* 16 sums unrolled */
+            buf += 16;
+        } while (--n);
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* do remaining bytes (less than NMAX, still just one modulo) */
+    if (len) {                  /* avoid modulos if none remaining */
+        while (len >= 16) {
+            len -= 16;
+            DO16(buf);
+            buf += 16;
+        }
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* return recombined sums */
+    return adler | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_combine(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off_t len2;
+{
+    unsigned long sum1;
+    unsigned long sum2;
+    unsigned rem;
+
+    /* the derivation of this formula is left as an exercise for the reader */
+    rem = (unsigned)(len2 % BASE);
+    sum1 = adler1 & 0xffff;
+    sum2 = rem * sum1;
+    MOD(sum2);
+    sum1 += (adler2 & 0xffff) + BASE - 1;
+    sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
+    if (sum1 > BASE) sum1 -= BASE;
+    if (sum1 > BASE) sum1 -= BASE;
+    if (sum2 > (BASE << 1)) sum2 -= (BASE << 1);
+    if (sum2 > BASE) sum2 -= BASE;
+    return sum1 | (sum2 << 16);
 }

zlib/compress.c

@@ -0,0 +1,79 @@
+/* compress.c -- compress a memory buffer
+ * Copyright (C) 1995-2003 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#define ZLIB_INTERNAL
+#include "zlib.h"
+
+/* ===========================================================================
+     Compresses the source buffer into the destination buffer. The level
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
+   length of the source buffer. Upon entry, destLen is the total size of the
+   destination buffer, which must be at least 0.1% larger than sourceLen plus
+   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+   Z_STREAM_ERROR if the level parameter is invalid.
+*/
+int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+    int level;
+{
+    z_stream stream;
+    int err;
+
+    stream.next_in = (Bytef*)source;
+    stream.avail_in = (uInt)sourceLen;
+#ifdef MAXSEG_64K
+    /* Check for source > 64K on 16-bit machine: */
+    if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
+#endif
+    stream.next_out = dest;
+    stream.avail_out = (uInt)*destLen;
+    if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
+
+    stream.zalloc = (alloc_func)0;
+    stream.zfree = (free_func)0;
+    stream.opaque = (voidpf)0;
+
+    err = deflateInit(&stream, level);
+    if (err != Z_OK) return err;
+
+    err = deflate(&stream, Z_FINISH);
+    if (err != Z_STREAM_END) {
+        deflateEnd(&stream);
+        return err == Z_OK ? Z_BUF_ERROR : err;
+    }
+    *destLen = stream.total_out;
+
+    err = deflateEnd(&stream);
+    return err;
+}
+
+/* ===========================================================================
+ */
+int ZEXPORT compress (dest, destLen, source, sourceLen)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+{
+    return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
+}
+
+/* ===========================================================================
+     If the default memLevel or windowBits for deflateInit() is changed, then
+   this function needs to be updated.
+ */
+uLong ZEXPORT compressBound (sourceLen)
+    uLong sourceLen;
+{
+    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + 11;
+}

zlib/crc32.c

@@ -1,22 +1,84 @@
 /* crc32.c -- compute the CRC-32 of a data stream
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
+ * Copyright (C) 1995-2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
+ * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing
+ * tables for updating the shift register in one step with three exclusive-ors
+ * instead of four steps with four exclusive-ors.  This results in about a
+ * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3.
  */
 
 /* @(#) $Id$ */
 
-#include "zlib.h"
+/*
+  Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore
+  protection on the static variables used to control the first-use generation
+  of the crc tables.  Therefore, if you #define DYNAMIC_CRC_TABLE, you should
+  first call get_crc_table() to initialize the tables before allowing more than
+  one thread to use crc32().
+ */
+
+#ifdef MAKECRCH
+#  include <stdio.h>
+#  ifndef DYNAMIC_CRC_TABLE
+#    define DYNAMIC_CRC_TABLE
+#  endif /* !DYNAMIC_CRC_TABLE */
+#endif /* MAKECRCH */
+
+#include "zutil.h"      /* for STDC and FAR definitions */
 
 #define local static
 
+/* Find a four-byte integer type for crc32_little() and crc32_big(). */
+#ifndef NOBYFOUR
+#  ifdef STDC           /* need ANSI C limits.h to determine sizes */
+#    include <limits.h>
+#    define BYFOUR
+#    if (UINT_MAX == 0xffffffffUL)
+       typedef unsigned int u4;
+#    else
+#      if (ULONG_MAX == 0xffffffffUL)
+         typedef unsigned long u4;
+#      else
+#        if (USHRT_MAX == 0xffffffffUL)
+           typedef unsigned short u4;
+#        else
+#          undef BYFOUR     /* can't find a four-byte integer type! */
+#        endif
+#      endif
+#    endif
+#  endif /* STDC */
+#endif /* !NOBYFOUR */
+
+/* Definitions for doing the crc four data bytes at a time. */
+#ifdef BYFOUR
+#  define REV(w) (((w)>>24)+(((w)>>8)&0xff00)+ \
+                (((w)&0xff00)<<8)+(((w)&0xff)<<24))
+   local unsigned long crc32_little OF((unsigned long,
+                        const unsigned char FAR *, unsigned));
+   local unsigned long crc32_big OF((unsigned long,
+                        const unsigned char FAR *, unsigned));
+#  define TBLS 8
+#else
+#  define TBLS 1
+#endif /* BYFOUR */
+
+/* Local functions for crc concatenation */
+local unsigned long gf2_matrix_times OF((unsigned long *mat,
+                                         unsigned long vec));
+local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
+
 #ifdef DYNAMIC_CRC_TABLE
 
-local int crc_table_empty = 1;
-local uLongf crc_table[256];
+local volatile int crc_table_empty = 1;
+local unsigned long FAR crc_table[TBLS][256];
 local void make_crc_table OF((void));
-
+#ifdef MAKECRCH
+   local void write_table OF((FILE *, const unsigned long FAR *));
+#endif /* MAKECRCH */
 /*
-  Generate a table for a byte-wise 32-bit CRC calculation on the polynomial:
+  Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
   x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
 
   Polynomials over GF(2) are represented in binary, one bit per coefficient,
@@ -35,128 +97,327 @@ local void make_crc_table OF((void));
   out is a one).  We start with the highest power (least significant bit) of
   q and repeat for all eight bits of q.
 
-  The table is simply the CRC of all possible eight bit values.  This is all
-  the information needed to generate CRC's on data a byte at a time for all
-  combinations of CRC register values and incoming bytes.
+  The first table is simply the CRC of all possible eight bit values.  This is
+  all the information needed to generate CRCs on data a byte at a time for all
+  combinations of CRC register values and incoming bytes.  The remaining tables
+  allow for word-at-a-time CRC calculation for both big-endian and little-
+  endian machines, where a word is four bytes.
 */
 local void make_crc_table()
 {
-  uLong c;
-  int n, k;
-  uLong poly;            /* polynomial exclusive-or pattern */
-  /* terms of polynomial defining this crc (except x^32): */
-  static const Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
+    unsigned long c;
+    int n, k;
+    unsigned long poly;                 /* polynomial exclusive-or pattern */
+    /* terms of polynomial defining this crc (except x^32): */
+    static volatile int first = 1;      /* flag to limit concurrent making */
+    static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
 
-  /* make exclusive-or pattern from polynomial (0xedb88320L) */
-  poly = 0L;
-  for (n = 0; n < sizeof(p)/sizeof(Byte); n++)
-    poly |= 1L << (31 - p[n]);
- 
-  for (n = 0; n < 256; n++)
-  {
-    c = (uLong)n;
-    for (k = 0; k < 8; k++)
-      c = c & 1 ? poly ^ (c >> 1) : c >> 1;
-    crc_table[n] = c;
-  }
-  crc_table_empty = 0;
+    /* See if another task is already doing this (not thread-safe, but better
+       than nothing -- significantly reduces duration of vulnerability in
+       case the advice about DYNAMIC_CRC_TABLE is ignored) */
+    if (first) {
+        first = 0;
+
+        /* make exclusive-or pattern from polynomial (0xedb88320UL) */
+        poly = 0UL;
+        for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++)
+            poly |= 1UL << (31 - p[n]);
+
+        /* generate a crc for every 8-bit value */
+        for (n = 0; n < 256; n++) {
+            c = (unsigned long)n;
+            for (k = 0; k < 8; k++)
+                c = c & 1 ? poly ^ (c >> 1) : c >> 1;
+            crc_table[0][n] = c;
+        }
+
+#ifdef BYFOUR
+        /* generate crc for each value followed by one, two, and three zeros,
+           and then the byte reversal of those as well as the first table */
+        for (n = 0; n < 256; n++) {
+            c = crc_table[0][n];
+            crc_table[4][n] = REV(c);
+            for (k = 1; k < 4; k++) {
+                c = crc_table[0][c & 0xff] ^ (c >> 8);
+                crc_table[k][n] = c;
+                crc_table[k + 4][n] = REV(c);
+            }
+        }
+#endif /* BYFOUR */
+
+        crc_table_empty = 0;
+    }
+    else {      /* not first */
+        /* wait for the other guy to finish (not efficient, but rare) */
+        while (crc_table_empty)
+            ;
+    }
+
+#ifdef MAKECRCH
+    /* write out CRC tables to crc32.h */
+    {
+        FILE *out;
+
+        out = fopen("crc32.h", "w");
+        if (out == NULL) return;
+        fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
+        fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
+        fprintf(out, "local const unsigned long FAR ");
+        fprintf(out, "crc_table[TBLS][256] =\n{\n  {\n");
+        write_table(out, crc_table[0]);
+#  ifdef BYFOUR
+        fprintf(out, "#ifdef BYFOUR\n");
+        for (k = 1; k < 8; k++) {
+            fprintf(out, "  },\n  {\n");
+            write_table(out, crc_table[k]);
+        }
+        fprintf(out, "#endif\n");
+#  endif /* BYFOUR */
+        fprintf(out, "  }\n};\n");
+        fclose(out);
+    }
+#endif /* MAKECRCH */
 }
-#else
+
+#ifdef MAKECRCH
+local void write_table(out, table)
+    FILE *out;
+    const unsigned long FAR *table;
+{
+    int n;
+
+    for (n = 0; n < 256; n++)
+        fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : "    ", table[n],
+                n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
+}
+#endif /* MAKECRCH */
+
+#else /* !DYNAMIC_CRC_TABLE */
 /* ========================================================================
- * Table of CRC-32's of all single-byte values (made by make_crc_table)
+ * Tables of CRC-32s of all single-byte values, made by make_crc_table().
  */
-local const uLongf crc_table[256] = {
-  0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
-  0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
-  0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
-  0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,
-  0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,
-  0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,
-  0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,
-  0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,
-  0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,
-  0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,
-  0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,
-  0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,
-  0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,
-  0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,
-  0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,
-  0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,
-  0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,
-  0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,
-  0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,
-  0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,
-  0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,
-  0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,
-  0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,
-  0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,
-  0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,
-  0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,
-  0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,
-  0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,
-  0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,
-  0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,
-  0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,
-  0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,
-  0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,
-  0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,
-  0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,
-  0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,
-  0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,
-  0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,
-  0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,
-  0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,
-  0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,
-  0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,
-  0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,
-  0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,
-  0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,
-  0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,
-  0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,
-  0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,
-  0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,
-  0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,
-  0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,
-  0x2d02ef8dL
-};
-#endif
+#include "crc32.h"
+#endif /* DYNAMIC_CRC_TABLE */
 
 /* =========================================================================
  * This function can be used by asm versions of crc32()
  */
-const uLongf * ZEXPORT get_crc_table()
+const unsigned long FAR * ZEXPORT get_crc_table()
 {
-#ifdef DYNAMIC_CRC_TABLE
-  if (crc_table_empty) make_crc_table();
-#endif
-  return (const uLongf *)crc_table;
-}
-
-/* ========================================================================= */
-#define DO1(buf) crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8);
-#define DO2(buf)  DO1(buf); DO1(buf);
-#define DO4(buf)  DO2(buf); DO2(buf);
-#define DO8(buf)  DO4(buf); DO4(buf);
-
-/* ========================================================================= */
-uLong ZEXPORT crc32(crc, buf, len)
-    uLong crc;
-    const Bytef *buf;
-    uInt len;
-{
-    if (buf == Z_NULL) return 0L;
 #ifdef DYNAMIC_CRC_TABLE
     if (crc_table_empty)
-      make_crc_table();
-#endif
-    crc = crc ^ 0xffffffffL;
-    while (len >= 8)
-    {
-      DO8(buf);
-      len -= 8;
+        make_crc_table();
+#endif /* DYNAMIC_CRC_TABLE */
+    return (const unsigned long FAR *)crc_table;
+}
+
+/* ========================================================================= */
+#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8)
+#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1
+
+/* ========================================================================= */
+unsigned long ZEXPORT crc32(crc, buf, len)
+    unsigned long crc;
+    const unsigned char FAR *buf;
+    unsigned len;
+{
+    if (buf == Z_NULL) return 0UL;
+
+#ifdef DYNAMIC_CRC_TABLE
+    if (crc_table_empty)
+        make_crc_table();
+#endif /* DYNAMIC_CRC_TABLE */
+
+#ifdef BYFOUR
+    if (sizeof(void *) == sizeof(ptrdiff_t)) {
+        u4 endian;
+
+        endian = 1;
+        if (*((unsigned char *)(&endian)))
+            return crc32_little(crc, buf, len);
+        else
+            return crc32_big(crc, buf, len);
+    }
+#endif /* BYFOUR */
+    crc = crc ^ 0xffffffffUL;
+    while (len >= 8) {
+        DO8;
+        len -= 8;
     }
     if (len) do {
-      DO1(buf);
+        DO1;
     } while (--len);
-    return crc ^ 0xffffffffL;
+    return crc ^ 0xffffffffUL;
+}
+
+#ifdef BYFOUR
+
+/* ========================================================================= */
+#define DOLIT4 c ^= *buf4++; \
+        c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \
+            crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24]
+#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4
+
+/* ========================================================================= */
+local unsigned long crc32_little(crc, buf, len)
+    unsigned long crc;
+    const unsigned char FAR *buf;
+    unsigned len;
+{
+    register u4 c;
+    register const u4 FAR *buf4;
+
+    c = (u4)crc;
+    c = ~c;
+    while (len && ((ptrdiff_t)buf & 3)) {
+        c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
+        len--;
+    }
+
+    buf4 = (const u4 FAR *)(const void FAR *)buf;
+    while (len >= 32) {
+        DOLIT32;
+        len -= 32;
+    }
+    while (len >= 4) {
+        DOLIT4;
+        len -= 4;
+    }
+    buf = (const unsigned char FAR *)buf4;
+
+    if (len) do {
+        c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
+    } while (--len);
+    c = ~c;
+    return (unsigned long)c;
+}
+
+/* ========================================================================= */
+#define DOBIG4 c ^= *++buf4; \
+        c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \
+            crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24]
+#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4
+
+/* ========================================================================= */
+local unsigned long crc32_big(crc, buf, len)
+    unsigned long crc;
+    const unsigned char FAR *buf;
+    unsigned len;
+{
+    register u4 c;
+    register const u4 FAR *buf4;
+
+    c = REV((u4)crc);
+    c = ~c;
+    while (len && ((ptrdiff_t)buf & 3)) {
+        c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
+        len--;
+    }
+
+    buf4 = (const u4 FAR *)(const void FAR *)buf;
+    buf4--;
+    while (len >= 32) {
+        DOBIG32;
+        len -= 32;
+    }
+    while (len >= 4) {
+        DOBIG4;
+        len -= 4;
+    }
+    buf4++;
+    buf = (const unsigned char FAR *)buf4;
+
+    if (len) do {
+        c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
+    } while (--len);
+    c = ~c;
+    return (unsigned long)(REV(c));
+}
+
+#endif /* BYFOUR */
+
+#define GF2_DIM 32      /* dimension of GF(2) vectors (length of CRC) */
+
+/* ========================================================================= */
+local unsigned long gf2_matrix_times(mat, vec)
+    unsigned long *mat;
+    unsigned long vec;
+{
+    unsigned long sum;
+
+    sum = 0;
+    while (vec) {
+        if (vec & 1)
+            sum ^= *mat;
+        vec >>= 1;
+        mat++;
+    }
+    return sum;
+}
+
+/* ========================================================================= */
+local void gf2_matrix_square(square, mat)
+    unsigned long *square;
+    unsigned long *mat;
+{
+    int n;
+
+    for (n = 0; n < GF2_DIM; n++)
+        square[n] = gf2_matrix_times(mat, mat[n]);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT crc32_combine(crc1, crc2, len2)
+    uLong crc1;
+    uLong crc2;
+    z_off_t len2;
+{
+    int n;
+    unsigned long row;
+    unsigned long even[GF2_DIM];    /* even-power-of-two zeros operator */
+    unsigned long odd[GF2_DIM];     /* odd-power-of-two zeros operator */
+
+    /* degenerate case */
+    if (len2 == 0)
+        return crc1;
+
+    /* put operator for one zero bit in odd */
+    odd[0] = 0xedb88320L;           /* CRC-32 polynomial */
+    row = 1;
+    for (n = 1; n < GF2_DIM; n++) {
+        odd[n] = row;
+        row <<= 1;
+    }
+
+    /* put operator for two zero bits in even */
+    gf2_matrix_square(even, odd);
+
+    /* put operator for four zero bits in odd */
+    gf2_matrix_square(odd, even);
+
+    /* apply len2 zeros to crc1 (first square will put the operator for one
+       zero byte, eight zero bits, in even) */
+    do {
+        /* apply zeros operator for this bit of len2 */
+        gf2_matrix_square(even, odd);
+        if (len2 & 1)
+            crc1 = gf2_matrix_times(even, crc1);
+        len2 >>= 1;
+
+        /* if no more bits set, then done */
+        if (len2 == 0)
+            break;
+
+        /* another iteration of the loop with odd and even swapped */
+        gf2_matrix_square(odd, even);
+        if (len2 & 1)
+            crc1 = gf2_matrix_times(odd, crc1);
+        len2 >>= 1;
+
+        /* if no more bits set, then done */
+    } while (len2 != 0);
+
+    /* return combined crc */
+    crc1 ^= crc2;
+    return crc1;
 }

zlib/crc32.h

@@ -0,0 +1,441 @@
+/* crc32.h -- tables for rapid CRC calculation
+ * Generated automatically by crc32.c
+ */
+
+local const unsigned long FAR crc_table[TBLS][256] =
+{
+  {
+    0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,
+    0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL,
+    0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL,
+    0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL,
+    0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL,
+    0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL,
+    0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL,
+    0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL,
+    0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL,
+    0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL,
+    0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL,
+    0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL,
+    0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL,
+    0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL,
+    0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL,
+    0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL,
+    0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL,
+    0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL,
+    0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL,
+    0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL,
+    0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL,
+    0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL,
+    0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL,
+    0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL,
+    0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL,
+    0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL,
+    0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL,
+    0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL,
+    0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL,
+    0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL,
+    0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL,
+    0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL,
+    0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL,
+    0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL,
+    0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL,
+    0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL,
+    0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL,
+    0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL,
+    0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL,
+    0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL,
+    0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL,
+    0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL,
+    0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL,
+    0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL,
+    0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL,
+    0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL,
+    0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL,
+    0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL,
+    0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL,
+    0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL,
+    0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL,
+    0x2d02ef8dUL
+#ifdef BYFOUR
+  },
+  {
+    0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL,
+    0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL,
+    0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL,
+    0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL,
+    0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL,
+    0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL,
+    0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL,
+    0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL,
+    0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL,
+    0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL,
+    0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL,
+    0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL,
+    0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL,
+    0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL,
+    0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL,
+    0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL,
+    0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL,
+    0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL,
+    0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL,
+    0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL,
+    0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL,
+    0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL,
+    0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL,
+    0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL,
+    0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL,
+    0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL,
+    0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL,
+    0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL,
+    0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL,
+    0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL,
+    0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL,
+    0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL,
+    0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL,
+    0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL,
+    0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL,
+    0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL,
+    0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL,
+    0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL,
+    0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL,
+    0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL,
+    0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL,
+    0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL,
+    0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL,
+    0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL,
+    0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL,
+    0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL,
+    0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL,
+    0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL,
+    0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL,
+    0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL,
+    0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL,
+    0x9324fd72UL
+  },
+  {
+    0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL,
+    0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL,
+    0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL,
+    0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL,
+    0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL,
+    0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL,
+    0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL,
+    0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL,
+    0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL,
+    0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL,
+    0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL,
+    0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL,
+    0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL,
+    0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL,
+    0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL,
+    0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL,
+    0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL,
+    0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL,
+    0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL,
+    0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL,
+    0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL,
+    0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL,
+    0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL,
+    0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL,
+    0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL,
+    0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL,
+    0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL,
+    0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL,
+    0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL,
+    0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL,
+    0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL,
+    0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL,
+    0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL,
+    0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL,
+    0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL,
+    0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL,
+    0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL,
+    0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL,
+    0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL,
+    0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL,
+    0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL,
+    0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL,
+    0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL,
+    0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL,
+    0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL,
+    0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL,
+    0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL,
+    0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL,
+    0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL,
+    0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL,
+    0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL,
+    0xbe9834edUL
+  },
+  {
+    0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL,
+    0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL,
+    0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL,
+    0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL,
+    0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL,
+    0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL,
+    0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL,
+    0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL,
+    0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL,
+    0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL,
+    0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL,
+    0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL,
+    0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL,
+    0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL,
+    0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL,
+    0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL,
+    0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL,
+    0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL,
+    0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL,
+    0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL,
+    0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL,
+    0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL,
+    0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL,
+    0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL,
+    0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL,
+    0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL,
+    0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL,
+    0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL,
+    0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL,
+    0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL,
+    0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL,
+    0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL,
+    0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL,
+    0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL,
+    0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL,
+    0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL,
+    0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL,
+    0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL,
+    0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL,
+    0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL,
+    0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL,
+    0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL,
+    0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL,
+    0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL,
+    0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL,
+    0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL,
+    0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL,
+    0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL,
+    0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL,
+    0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL,
+    0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL,
+    0xde0506f1UL
+  },
+  {
+    0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL,
+    0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL,
+    0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL,
+    0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL,
+    0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL,
+    0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL,
+    0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL,
+    0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL,
+    0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL,
+    0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL,
+    0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL,
+    0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL,
+    0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL,
+    0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL,
+    0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL,
+    0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL,
+    0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL,
+    0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL,
+    0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL,
+    0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL,
+    0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL,
+    0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL,
+    0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL,
+    0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL,
+    0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL,
+    0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL,
+    0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL,
+    0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL,
+    0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL,
+    0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL,
+    0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL,
+    0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL,
+    0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL,
+    0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL,
+    0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL,
+    0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL,
+    0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL,
+    0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL,
+    0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL,
+    0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL,
+    0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL,
+    0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL,
+    0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL,
+    0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL,
+    0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL,
+    0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL,
+    0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL,
+    0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL,
+    0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL,
+    0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL,
+    0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL,
+    0x8def022dUL
+  },
+  {
+    0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL,
+    0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL,
+    0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL,
+    0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL,
+    0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL,
+    0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL,
+    0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL,
+    0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL,
+    0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL,
+    0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL,
+    0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL,
+    0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL,
+    0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL,
+    0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL,
+    0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL,
+    0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL,
+    0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL,
+    0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL,
+    0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL,
+    0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL,
+    0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL,
+    0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL,
+    0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL,
+    0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL,
+    0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL,
+    0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL,
+    0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL,
+    0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL,
+    0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL,
+    0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL,
+    0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL,
+    0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL,
+    0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL,
+    0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL,
+    0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL,
+    0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL,
+    0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL,
+    0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL,
+    0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL,
+    0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL,
+    0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL,
+    0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL,
+    0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL,
+    0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL,
+    0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL,
+    0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL,
+    0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL,
+    0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL,
+    0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL,
+    0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL,
+    0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL,
+    0x72fd2493UL
+  },
+  {
+    0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL,
+    0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL,
+    0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL,
+    0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL,
+    0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL,
+    0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL,
+    0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL,
+    0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL,
+    0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL,
+    0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL,
+    0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL,
+    0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL,
+    0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL,
+    0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL,
+    0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL,
+    0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL,
+    0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL,
+    0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL,
+    0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL,
+    0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL,
+    0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL,
+    0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL,
+    0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL,
+    0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL,
+    0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL,
+    0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL,
+    0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL,
+    0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL,
+    0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL,
+    0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL,
+    0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL,
+    0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL,
+    0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL,
+    0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL,
+    0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL,
+    0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL,
+    0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL,
+    0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL,
+    0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL,
+    0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL,
+    0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL,
+    0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL,
+    0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL,
+    0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL,
+    0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL,
+    0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL,
+    0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL,
+    0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL,
+    0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL,
+    0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL,
+    0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL,
+    0xed3498beUL
+  },
+  {
+    0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL,
+    0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL,
+    0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL,
+    0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL,
+    0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL,
+    0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL,
+    0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL,
+    0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL,
+    0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL,
+    0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL,
+    0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL,
+    0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL,
+    0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL,
+    0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL,
+    0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL,
+    0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL,
+    0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL,
+    0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL,
+    0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL,
+    0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL,
+    0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL,
+    0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL,
+    0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL,
+    0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL,
+    0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL,
+    0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL,
+    0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL,
+    0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL,
+    0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL,
+    0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL,
+    0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL,
+    0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL,
+    0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL,
+    0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL,
+    0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL,
+    0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL,
+    0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL,
+    0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL,
+    0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL,
+    0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL,
+    0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL,
+    0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL,
+    0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL,
+    0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL,
+    0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL,
+    0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL,
+    0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL,
+    0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL,
+    0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL,
+    0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL,
+    0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL,
+    0xf10605deUL
+#endif
+  }
+};

zlib/deflate.h

@@ -1,6 +1,6 @@
 /* deflate.h -- internal compression state
- * Copyright (C) 1995-2002 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h 
+ * Copyright (C) 1995-2004 Jean-loup Gailly
+ * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
 /* WARNING: this file should *not* be used by applications. It is
@@ -10,11 +10,19 @@
 
 /* @(#) $Id$ */
 
-#ifndef _DEFLATE_H
-#define _DEFLATE_H
+#ifndef DEFLATE_H
+#define DEFLATE_H
 
 #include "zutil.h"
 
+/* define NO_GZIP when compiling if you want to disable gzip header and
+   trailer creation by deflate().  NO_GZIP would be used to avoid linking in
+   the crc code when it is not needed.  For shared libraries, gzip encoding
+   should be left enabled. */
+#ifndef NO_GZIP
+#  define GZIP
+#endif
+
 /* ===========================================================================
  * Internal compression state.
  */
@@ -41,6 +49,10 @@
 /* All codes must not exceed MAX_BITS bits */
 
 #define INIT_STATE    42
+#define EXTRA_STATE   69
+#define NAME_STATE    73
+#define COMMENT_STATE 91
+#define HCRC_STATE   103
 #define BUSY_STATE   113
 #define FINISH_STATE 666
 /* Stream status */
@@ -85,9 +97,10 @@ typedef struct internal_state {
     Bytef *pending_buf;  /* output still pending */
     ulg   pending_buf_size; /* size of pending_buf */
     Bytef *pending_out;  /* next pending byte to output to the stream */
-    int   pending;       /* nb of bytes in the pending buffer */
-    int   noheader;      /* suppress zlib header and adler32 */
-    Byte  data_type;     /* UNKNOWN, BINARY or ASCII */
+    uInt   pending;      /* nb of bytes in the pending buffer */
+    int   wrap;          /* bit 0 true for zlib, bit 1 true for gzip */
+    gz_headerp  gzhead;  /* gzip header information to write */
+    uInt   gzindex;      /* where in extra, name, or comment */
     Byte  method;        /* STORED (for zip only) or DEFLATED */
     int   last_flush;    /* value of flush param for previous deflate call */
 
@@ -269,7 +282,7 @@ typedef struct internal_state {
 void _tr_init         OF((deflate_state *s));
 int  _tr_tally        OF((deflate_state *s, unsigned dist, unsigned lc));
 void _tr_flush_block  OF((deflate_state *s, charf *buf, ulg stored_len,
-			  int eof));
+                          int eof));
 void _tr_align        OF((deflate_state *s));
 void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
                           int eof));
@@ -312,7 +325,7 @@ void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
 #else
 # define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
 # define _tr_tally_dist(s, distance, length, flush) \
-              flush = _tr_tally(s, distance, length) 
+              flush = _tr_tally(s, distance, length)
 #endif
 
-#endif
+#endif /* DEFLATE_H */

zlib/infblock.c

@@ -1,403 +0,0 @@
-/* infblock.c -- interpret and process block types to last block
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-#include "zutil.h"
-#include "infblock.h"
-#include "inftrees.h"
-#include "infcodes.h"
-#include "infutil.h"
-
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* Table for deflate from PKZIP's appnote.txt. */
-local const uInt border[] = { /* Order of the bit length code lengths */
-        16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-/*
-   Notes beyond the 1.93a appnote.txt:
-
-   1. Distance pointers never point before the beginning of the output
-      stream.
-   2. Distance pointers can point back across blocks, up to 32k away.
-   3. There is an implied maximum of 7 bits for the bit length table and
-      15 bits for the actual data.
-   4. If only one code exists, then it is encoded using one bit.  (Zero
-      would be more efficient, but perhaps a little confusing.)  If two
-      codes exist, they are coded using one bit each (0 and 1).
-   5. There is no way of sending zero distance codes--a dummy must be
-      sent if there are none.  (History: a pre 2.0 version of PKZIP would
-      store blocks with no distance codes, but this was discovered to be
-      too harsh a criterion.)  Valid only for 1.93a.  2.04c does allow
-      zero distance codes, which is sent as one code of zero bits in
-      length.
-   6. There are up to 286 literal/length codes.  Code 256 represents the
-      end-of-block.  Note however that the static length tree defines
-      288 codes just to fill out the Huffman codes.  Codes 286 and 287
-      cannot be used though, since there is no length base or extra bits
-      defined for them.  Similarily, there are up to 30 distance codes.
-      However, static trees define 32 codes (all 5 bits) to fill out the
-      Huffman codes, but the last two had better not show up in the data.
-   7. Unzip can check dynamic Huffman blocks for complete code sets.
-      The exception is that a single code would not be complete (see #4).
-   8. The five bits following the block type is really the number of
-      literal codes sent minus 257.
-   9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
-      (1+6+6).  Therefore, to output three times the length, you output
-      three codes (1+1+1), whereas to output four times the same length,
-      you only need two codes (1+3).  Hmm.
-  10. In the tree reconstruction algorithm, Code = Code + Increment
-      only if BitLength(i) is not zero.  (Pretty obvious.)
-  11. Correction: 4 Bits: # of Bit Length codes - 4     (4 - 19)
-  12. Note: length code 284 can represent 227-258, but length code 285
-      really is 258.  The last length deserves its own, short code
-      since it gets used a lot in very redundant files.  The length
-      258 is special since 258 - 3 (the min match length) is 255.
-  13. The literal/length and distance code bit lengths are read as a
-      single stream of lengths.  It is possible (and advantageous) for
-      a repeat code (16, 17, or 18) to go across the boundary between
-      the two sets of lengths.
- */
-
-
-void inflate_blocks_reset(s, z, c)
-inflate_blocks_statef *s;
-z_streamp z;
-uLongf *c;
-{
-  if (c != Z_NULL)
-    *c = s->check;
-  if (s->mode == BTREE || s->mode == DTREE)
-    ZFREE(z, s->sub.trees.blens);
-  if (s->mode == CODES)
-    inflate_codes_free(s->sub.decode.codes, z);
-  s->mode = TYPE;
-  s->bitk = 0;
-  s->bitb = 0;
-  s->read = s->write = s->window;
-  if (s->checkfn != Z_NULL)
-    z->adler = s->check = (*s->checkfn)(0L, (const Bytef *)Z_NULL, 0);
-  Tracev((stderr, "inflate:   blocks reset\n"));
-}
-
-
-inflate_blocks_statef *inflate_blocks_new(z, c, w)
-z_streamp z;
-check_func c;
-uInt w;
-{
-  inflate_blocks_statef *s;
-
-  if ((s = (inflate_blocks_statef *)ZALLOC
-       (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
-    return s;
-  if ((s->hufts =
-       (inflate_huft *)ZALLOC(z, sizeof(inflate_huft), MANY)) == Z_NULL)
-  {
-    ZFREE(z, s);
-    return Z_NULL;
-  }
-  if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
-  {
-    ZFREE(z, s->hufts);
-    ZFREE(z, s);
-    return Z_NULL;
-  }
-  s->end = s->window + w;
-  s->checkfn = c;
-  s->mode = TYPE;
-  Tracev((stderr, "inflate:   blocks allocated\n"));
-  inflate_blocks_reset(s, z, Z_NULL);
-  return s;
-}
-
-
-int inflate_blocks(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
-  uInt t;               /* temporary storage */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-
-  /* copy input/output information to locals (UPDATE macro restores) */
-  LOAD
-
-  /* process input based on current state */
-  while (1) switch (s->mode)
-  {
-    case TYPE:
-      NEEDBITS(3)
-      t = (uInt)b & 7;
-      s->last = t & 1;
-      switch (t >> 1)
-      {
-        case 0:                         /* stored */
-          Tracev((stderr, "inflate:     stored block%s\n",
-                 s->last ? " (last)" : ""));
-          DUMPBITS(3)
-          t = k & 7;                    /* go to byte boundary */
-          DUMPBITS(t)
-          s->mode = LENS;               /* get length of stored block */
-          break;
-        case 1:                         /* fixed */
-          Tracev((stderr, "inflate:     fixed codes block%s\n",
-                 s->last ? " (last)" : ""));
-          {
-            uInt bl, bd;
-            inflate_huft *tl, *td;
-
-            inflate_trees_fixed(&bl, &bd, &tl, &td, z);
-            s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
-            if (s->sub.decode.codes == Z_NULL)
-            {
-              r = Z_MEM_ERROR;
-              LEAVE
-            }
-          }
-          DUMPBITS(3)
-          s->mode = CODES;
-          break;
-        case 2:                         /* dynamic */
-          Tracev((stderr, "inflate:     dynamic codes block%s\n",
-                 s->last ? " (last)" : ""));
-          DUMPBITS(3)
-          s->mode = TABLE;
-          break;
-        case 3:                         /* illegal */
-          DUMPBITS(3)
-          s->mode = zBAD;
-          z->msg = (char*)"invalid block type";
-          r = Z_DATA_ERROR;
-          LEAVE
-      }
-      break;
-    case LENS:
-      NEEDBITS(32)
-      if ((((~b) >> 16) & 0xffff) != (b & 0xffff))
-      {
-        s->mode = zBAD;
-        z->msg = (char*)"invalid stored block lengths";
-        r = Z_DATA_ERROR;
-        LEAVE
-      }
-      s->sub.left = (uInt)b & 0xffff;
-      b = k = 0;                      /* dump bits */
-      Tracev((stderr, "inflate:       stored length %u\n", s->sub.left));
-      s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE);
-      break;
-    case STORED:
-      if (n == 0)
-        LEAVE
-      NEEDOUT
-      t = s->sub.left;
-      if (t > n) t = n;
-      if (t > m) t = m;
-      zmemcpy(q, p, t);
-      p += t;  n -= t;
-      q += t;  m -= t;
-      if ((s->sub.left -= t) != 0)
-        break;
-      Tracev((stderr, "inflate:       stored end, %lu total out\n",
-              z->total_out + (q >= s->read ? q - s->read :
-              (s->end - s->read) + (q - s->window))));
-      s->mode = s->last ? DRY : TYPE;
-      break;
-    case TABLE:
-      NEEDBITS(14)
-      s->sub.trees.table = t = (uInt)b & 0x3fff;
-#ifndef PKZIP_BUG_WORKAROUND
-      if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
-      {
-        s->mode = zBAD;
-        z->msg = (char*)"too many length or distance symbols";
-        r = Z_DATA_ERROR;
-        LEAVE
-      }
-#endif
-      t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
-      if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
-      {
-        r = Z_MEM_ERROR;
-        LEAVE
-      }
-      DUMPBITS(14)
-      s->sub.trees.index = 0;
-      Tracev((stderr, "inflate:       table sizes ok\n"));
-      s->mode = BTREE;
-    case BTREE:
-      while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
-      {
-        NEEDBITS(3)
-        s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
-        DUMPBITS(3)
-      }
-      while (s->sub.trees.index < 19)
-        s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
-      s->sub.trees.bb = 7;
-      t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
-                             &s->sub.trees.tb, s->hufts, z);
-      if (t != Z_OK)
-      {
-        r = t;
-        if (r == Z_DATA_ERROR)
-	  {
-	    ZFREE(z, s->sub.trees.blens);
-	    s->mode = zBAD;
-	  }
-        LEAVE
-      }
-      s->sub.trees.index = 0;
-      Tracev((stderr, "inflate:       bits tree ok\n"));
-      s->mode = DTREE;
-    case DTREE:
-      while (t = s->sub.trees.table,
-             s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
-      {
-        inflate_huft *h;
-        uInt i, j, c;
-
-        t = s->sub.trees.bb;
-        NEEDBITS(t)
-        h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
-        t = h->bits;
-        c = h->base;
-        if (c < 16)
-        {
-          DUMPBITS(t)
-          s->sub.trees.blens[s->sub.trees.index++] = c;
-        }
-        else /* c == 16..18 */
-        {
-          i = c == 18 ? 7 : c - 14;
-          j = c == 18 ? 11 : 3;
-          NEEDBITS(t + i)
-          DUMPBITS(t)
-          j += (uInt)b & inflate_mask[i];
-          DUMPBITS(i)
-          i = s->sub.trees.index;
-          t = s->sub.trees.table;
-          if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
-              (c == 16 && i < 1))
-          {
-            ZFREE(z, s->sub.trees.blens);
-            s->mode = zBAD;
-            z->msg = (char*)"invalid bit length repeat";
-            r = Z_DATA_ERROR;
-            LEAVE
-          }
-          c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
-          do {
-            s->sub.trees.blens[i++] = c;
-          } while (--j);
-          s->sub.trees.index = i;
-        }
-      }
-      s->sub.trees.tb = Z_NULL;
-      {
-        uInt bl, bd;
-        inflate_huft *tl, *td;
-        inflate_codes_statef *c;
-
-        bl = 9;         /* must be <= 9 for lookahead assumptions */
-        bd = 6;         /* must be <= 9 for lookahead assumptions */
-        t = s->sub.trees.table;
-        t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
-                                  s->sub.trees.blens, &bl, &bd, &tl, &td,
-                                  s->hufts, z);
-        if (t != Z_OK)
-        {
-          if (t == (uInt)Z_DATA_ERROR)
-	    {
-	      ZFREE(z, s->sub.trees.blens);
-	      s->mode = zBAD;
-	    }
-          r = t;
-          LEAVE
-        }
-	ZFREE(z, s->sub.trees.blens);
-        Tracev((stderr, "inflate:       trees ok\n"));
-        if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
-        {
-          r = Z_MEM_ERROR;
-          LEAVE
-        }
-        s->sub.decode.codes = c;
-      }
-      s->mode = CODES;
-    case CODES:
-      UPDATE
-      if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)
-        return inflate_flush(s, z, r);
-      r = Z_OK;
-      inflate_codes_free(s->sub.decode.codes, z);
-      LOAD
-      Tracev((stderr, "inflate:       codes end, %lu total out\n",
-              z->total_out + (q >= s->read ? q - s->read :
-              (s->end - s->read) + (q - s->window))));
-      if (!s->last)
-      {
-        s->mode = TYPE;
-        break;
-      }
-      s->mode = DRY;
-    case DRY:
-      FLUSH
-      if (s->read != s->write)
-        LEAVE
-      s->mode = DONE;
-    case DONE:
-      r = Z_STREAM_END;
-      LEAVE
-    case zBAD:
-      r = Z_DATA_ERROR;
-      LEAVE
-    default:
-      r = Z_STREAM_ERROR;
-      LEAVE
-  }
-}
-
-
-int inflate_blocks_free(s, z)
-inflate_blocks_statef *s;
-z_streamp z;
-{
-  inflate_blocks_reset(s, z, Z_NULL);
-  ZFREE(z, s->window);
-  ZFREE(z, s->hufts);
-  ZFREE(z, s);
-  Tracev((stderr, "inflate:   blocks freed\n"));
-  return Z_OK;
-}
-
-
-void inflate_set_dictionary(s, d, n)
-inflate_blocks_statef *s;
-const Bytef *d;
-uInt  n;
-{
-  zmemcpy(s->window, d, n);
-  s->read = s->write = s->window + n;
-}
-
-
-/* Returns true if inflate is currently at the end of a block generated
- * by Z_SYNC_FLUSH or Z_FULL_FLUSH. 
- * IN assertion: s != Z_NULL
- */
-int inflate_blocks_sync_point(s)
-inflate_blocks_statef *s;
-{
-  return s->mode == LENS;
-}

zlib/infblock.h

@@ -1,39 +0,0 @@
-/* infblock.h -- header to use infblock.c
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_blocks_state;
-typedef struct inflate_blocks_state FAR inflate_blocks_statef;
-
-extern inflate_blocks_statef * inflate_blocks_new OF((
-    z_streamp z,
-    check_func c,               /* check function */
-    uInt w));                   /* window size */
-
-extern int inflate_blocks OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    int));                      /* initial return code */
-
-extern void inflate_blocks_reset OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    uLongf *));                  /* check value on output */
-
-extern int inflate_blocks_free OF((
-    inflate_blocks_statef *,
-    z_streamp));
-
-extern void inflate_set_dictionary OF((
-    inflate_blocks_statef *s,
-    const Bytef *d,  /* dictionary */
-    uInt  n));       /* dictionary length */
-
-extern int inflate_blocks_sync_point OF((
-    inflate_blocks_statef *s));

zlib/infcodes.c

@@ -1,251 +0,0 @@
-/* infcodes.c -- process literals and length/distance pairs
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-#include "infblock.h"
-#include "infcodes.h"
-#include "infutil.h"
-#include "inffast.h"
-
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-typedef enum {        /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
-      START,    /* x: set up for LEN */
-      LEN,      /* i: get length/literal/eob next */
-      LENEXT,   /* i: getting length extra (have base) */
-      DIST,     /* i: get distance next */
-      DISTEXT,  /* i: getting distance extra */
-      COPY,     /* o: copying bytes in window, waiting for space */
-      LIT,      /* o: got literal, waiting for output space */
-      WASH,     /* o: got eob, possibly still output waiting */
-      END,      /* x: got eob and all data flushed */
-      BADCODE}  /* x: got error */
-inflate_codes_mode;
-
-/* inflate codes private state */
-struct inflate_codes_state {
-
-  /* mode */
-  inflate_codes_mode mode;      /* current inflate_codes mode */
-
-  /* mode dependent information */
-  uInt len;
-  union {
-    struct {
-      inflate_huft *tree;       /* pointer into tree */
-      uInt need;                /* bits needed */
-    } code;             /* if LEN or DIST, where in tree */
-    uInt lit;           /* if LIT, literal */
-    struct {
-      uInt get;                 /* bits to get for extra */
-      uInt dist;                /* distance back to copy from */
-    } copy;             /* if EXT or COPY, where and how much */
-  } sub;                /* submode */
-
-  /* mode independent information */
-  Byte lbits;           /* ltree bits decoded per branch */
-  Byte dbits;           /* dtree bits decoder per branch */
-  inflate_huft *ltree;          /* literal/length/eob tree */
-  inflate_huft *dtree;          /* distance tree */
-
-};
-
-
-inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z)
-uInt bl, bd;
-inflate_huft *tl;
-inflate_huft *td; /* need separate declaration for Borland C++ */
-z_streamp z;
-{
-  inflate_codes_statef *c;
-
-  if ((c = (inflate_codes_statef *)
-       ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)
-  {
-    c->mode = START;
-    c->lbits = (Byte)bl;
-    c->dbits = (Byte)bd;
-    c->ltree = tl;
-    c->dtree = td;
-    Tracev((stderr, "inflate:       codes new\n"));
-  }
-  return c;
-}
-
-
-int inflate_codes(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
-  uInt j;               /* temporary storage */
-  inflate_huft *t;      /* temporary pointer */
-  uInt e;               /* extra bits or operation */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-  Bytef *f;             /* pointer to copy strings from */
-  inflate_codes_statef *c = s->sub.decode.codes;  /* codes state */
-
-  /* copy input/output information to locals (UPDATE macro restores) */
-  LOAD
-
-  /* process input and output based on current state */
-  while (1) switch (c->mode)
-  {             /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
-    case START:         /* x: set up for LEN */
-#ifndef SLOW
-      if (m >= 258 && n >= 10)
-      {
-        UPDATE
-        r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
-        LOAD
-        if (r != Z_OK)
-        {
-          c->mode = r == Z_STREAM_END ? WASH : BADCODE;
-          break;
-        }
-      }
-#endif /* !SLOW */
-      c->sub.code.need = c->lbits;
-      c->sub.code.tree = c->ltree;
-      c->mode = LEN;
-    case LEN:           /* i: get length/literal/eob next */
-      j = c->sub.code.need;
-      NEEDBITS(j)
-      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
-      DUMPBITS(t->bits)
-      e = (uInt)(t->exop);
-      if (e == 0)               /* literal */
-      {
-        c->sub.lit = t->base;
-        Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                 "inflate:         literal '%c'\n" :
-                 "inflate:         literal 0x%02x\n", t->base));
-        c->mode = LIT;
-        break;
-      }
-      if (e & 16)               /* length */
-      {
-        c->sub.copy.get = e & 15;
-        c->len = t->base;
-        c->mode = LENEXT;
-        break;
-      }
-      if ((e & 64) == 0)        /* next table */
-      {
-        c->sub.code.need = e;
-        c->sub.code.tree = t + t->base;
-        break;
-      }
-      if (e & 32)               /* end of block */
-      {
-        Tracevv((stderr, "inflate:         end of block\n"));
-        c->mode = WASH;
-        break;
-      }
-      c->mode = BADCODE;        /* invalid code */
-      z->msg = (char*)"invalid literal/length code";
-      r = Z_DATA_ERROR;
-      LEAVE
-    case LENEXT:        /* i: getting length extra (have base) */
-      j = c->sub.copy.get;
-      NEEDBITS(j)
-      c->len += (uInt)b & inflate_mask[j];
-      DUMPBITS(j)
-      c->sub.code.need = c->dbits;
-      c->sub.code.tree = c->dtree;
-      Tracevv((stderr, "inflate:         length %u\n", c->len));
-      c->mode = DIST;
-    case DIST:          /* i: get distance next */
-      j = c->sub.code.need;
-      NEEDBITS(j)
-      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
-      DUMPBITS(t->bits)
-      e = (uInt)(t->exop);
-      if (e & 16)               /* distance */
-      {
-        c->sub.copy.get = e & 15;
-        c->sub.copy.dist = t->base;
-        c->mode = DISTEXT;
-        break;
-      }
-      if ((e & 64) == 0)        /* next table */
-      {
-        c->sub.code.need = e;
-        c->sub.code.tree = t + t->base;
-        break;
-      }
-      c->mode = BADCODE;        /* invalid code */
-      z->msg = (char*)"invalid distance code";
-      r = Z_DATA_ERROR;
-      LEAVE
-    case DISTEXT:       /* i: getting distance extra */
-      j = c->sub.copy.get;
-      NEEDBITS(j)
-      c->sub.copy.dist += (uInt)b & inflate_mask[j];
-      DUMPBITS(j)
-      Tracevv((stderr, "inflate:         distance %u\n", c->sub.copy.dist));
-      c->mode = COPY;
-    case COPY:          /* o: copying bytes in window, waiting for space */
-      f = q - c->sub.copy.dist;
-      while (f < s->window)             /* modulo window size-"while" instead */
-        f += s->end - s->window;        /* of "if" handles invalid distances */
-      while (c->len)
-      {
-        NEEDOUT
-        OUTBYTE(*f++)
-        if (f == s->end)
-          f = s->window;
-        c->len--;
-      }
-      c->mode = START;
-      break;
-    case LIT:           /* o: got literal, waiting for output space */
-      NEEDOUT
-      OUTBYTE(c->sub.lit)
-      c->mode = START;
-      break;
-    case WASH:          /* o: got eob, possibly more output */
-      if (k > 7)        /* return unused byte, if any */
-      {
-        Assert(k < 16, "inflate_codes grabbed too many bytes")
-        k -= 8;
-        n++;
-        p--;            /* can always return one */
-      }
-      FLUSH
-      if (s->read != s->write)
-        LEAVE
-      c->mode = END;
-    case END:
-      r = Z_STREAM_END;
-      LEAVE
-    case BADCODE:       /* x: got error */
-      r = Z_DATA_ERROR;
-      LEAVE
-    default:
-      r = Z_STREAM_ERROR;
-      LEAVE
-  }
-#ifdef NEED_DUMMY_RETURN
-  return Z_STREAM_ERROR;  /* Some dumb compilers complain without this */
-#endif
-}
-
-
-void inflate_codes_free(c, z)
-inflate_codes_statef *c;
-z_streamp z;
-{
-  ZFREE(z, c);
-  Tracev((stderr, "inflate:       codes free\n"));
-}

zlib/infcodes.h

@@ -1,27 +0,0 @@
-/* infcodes.h -- header to use infcodes.c
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_codes_state;
-typedef struct inflate_codes_state FAR inflate_codes_statef;
-
-extern inflate_codes_statef *inflate_codes_new OF((
-    uInt, uInt,
-    inflate_huft *, inflate_huft *,
-    z_streamp ));
-
-extern int inflate_codes OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    int));
-
-extern void inflate_codes_free OF((
-    inflate_codes_statef *,
-    z_streamp ));
-

zlib/inffast.c

@@ -1,183 +1,318 @@
-/* inffast.c -- process literals and length/distance pairs fast
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
+/* inffast.c -- fast decoding
+ * Copyright (C) 1995-2004 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
 #include "zutil.h"
 #include "inftrees.h"
-#include "infblock.h"
-#include "infcodes.h"
-#include "infutil.h"
+#include "inflate.h"
 #include "inffast.h"
 
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
+#ifndef ASMINF
 
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
+/* Allow machine dependent optimization for post-increment or pre-increment.
+   Based on testing to date,
+   Pre-increment preferred for:
+   - PowerPC G3 (Adler)
+   - MIPS R5000 (Randers-Pehrson)
+   Post-increment preferred for:
+   - none
+   No measurable difference:
+   - Pentium III (Anderson)
+   - M68060 (Nikl)
+ */
+#ifdef POSTINC
+#  define OFF 0
+#  define PUP(a) *(a)++
+#else
+#  define OFF 1
+#  define PUP(a) *++(a)
+#endif
 
-/* macros for bit input with no checking and for returning unused bytes */
-#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define UNGRAB {c=z->avail_in-n;c=(k>>3)<c?k>>3:c;n+=c;p-=c;k-=c<<3;}
+/*
+   Decode literal, length, and distance codes and write out the resulting
+   literal and match bytes until either not enough input or output is
+   available, an end-of-block is encountered, or a data error is encountered.
+   When large enough input and output buffers are supplied to inflate(), for
+   example, a 16K input buffer and a 64K output buffer, more than 95% of the
+   inflate execution time is spent in this routine.
 
-/* Called with number of bytes left to write in window at least 258
-   (the maximum string length) and number of input bytes available
-   at least ten.  The ten bytes are six bytes for the longest length/
-   distance pair plus four bytes for overloading the bit buffer. */
+   Entry assumptions:
 
-int inflate_fast(bl, bd, tl, td, s, z)
-uInt bl, bd;
-inflate_huft *tl;
-inflate_huft *td; /* need separate declaration for Borland C++ */
-inflate_blocks_statef *s;
-z_streamp z;
+        state->mode == LEN
+        strm->avail_in >= 6
+        strm->avail_out >= 258
+        start >= strm->avail_out
+        state->bits < 8
+
+   On return, state->mode is one of:
+
+        LEN -- ran out of enough output space or enough available input
+        TYPE -- reached end of block code, inflate() to interpret next block
+        BAD -- error in block data
+
+   Notes:
+
+    - The maximum input bits used by a length/distance pair is 15 bits for the
+      length code, 5 bits for the length extra, 15 bits for the distance code,
+      and 13 bits for the distance extra.  This totals 48 bits, or six bytes.
+      Therefore if strm->avail_in >= 6, then there is enough input to avoid
+      checking for available input while decoding.
+
+    - The maximum bytes that a single length/distance pair can output is 258
+      bytes, which is the maximum length that can be coded.  inflate_fast()
+      requires strm->avail_out >= 258 for each loop to avoid checking for
+      output space.
+ */
+void inflate_fast(strm, start)
+z_streamp strm;
+unsigned start;         /* inflate()'s starting value for strm->avail_out */
 {
-  inflate_huft *t;      /* temporary pointer */
-  uInt e;               /* extra bits or operation */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-  uInt ml;              /* mask for literal/length tree */
-  uInt md;              /* mask for distance tree */
-  uInt c;               /* bytes to copy */
-  uInt d;               /* distance back to copy from */
-  Bytef *r;             /* copy source pointer */
+    struct inflate_state FAR *state;
+    unsigned char FAR *in;      /* local strm->next_in */
+    unsigned char FAR *last;    /* while in < last, enough input available */
+    unsigned char FAR *out;     /* local strm->next_out */
+    unsigned char FAR *beg;     /* inflate()'s initial strm->next_out */
+    unsigned char FAR *end;     /* while out < end, enough space available */
+#ifdef INFLATE_STRICT
+    unsigned dmax;              /* maximum distance from zlib header */
+#endif
+    unsigned wsize;             /* window size or zero if not using window */
+    unsigned whave;             /* valid bytes in the window */
+    unsigned write;             /* window write index */
+    unsigned char FAR *window;  /* allocated sliding window, if wsize != 0 */
+    unsigned long hold;         /* local strm->hold */
+    unsigned bits;              /* local strm->bits */
+    code const FAR *lcode;      /* local strm->lencode */
+    code const FAR *dcode;      /* local strm->distcode */
+    unsigned lmask;             /* mask for first level of length codes */
+    unsigned dmask;             /* mask for first level of distance codes */
+    code this;                  /* retrieved table entry */
+    unsigned op;                /* code bits, operation, extra bits, or */
+                                /*  window position, window bytes to copy */
+    unsigned len;               /* match length, unused bytes */
+    unsigned dist;              /* match distance */
+    unsigned char FAR *from;    /* where to copy match from */
 
-  /* load input, output, bit values */
-  LOAD
+    /* copy state to local variables */
+    state = (struct inflate_state FAR *)strm->state;
+    in = strm->next_in - OFF;
+    last = in + (strm->avail_in - 5);
+    out = strm->next_out - OFF;
+    beg = out - (start - strm->avail_out);
+    end = out + (strm->avail_out - 257);
+#ifdef INFLATE_STRICT
+    dmax = state->dmax;
+#endif
+    wsize = state->wsize;
+    whave = state->whave;
+    write = state->write;
+    window = state->window;
+    hold = state->hold;
+    bits = state->bits;
+    lcode = state->lencode;
+    dcode = state->distcode;
+    lmask = (1U << state->lenbits) - 1;
+    dmask = (1U << state->distbits) - 1;
 
-  /* initialize masks */
-  ml = inflate_mask[bl];
-  md = inflate_mask[bd];
-
-  /* do until not enough input or output space for fast loop */
-  do {                          /* assume called with m >= 258 && n >= 10 */
-    /* get literal/length code */
-    GRABBITS(20)                /* max bits for literal/length code */
-    if ((e = (t = tl + ((uInt)b & ml))->exop) == 0)
-    {
-      DUMPBITS(t->bits)
-      Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                "inflate:         * literal '%c'\n" :
-                "inflate:         * literal 0x%02x\n", t->base));
-      *q++ = (Byte)t->base;
-      m--;
-      continue;
-    }
+    /* decode literals and length/distances until end-of-block or not enough
+       input data or output space */
     do {
-      DUMPBITS(t->bits)
-      if (e & 16)
-      {
-        /* get extra bits for length */
-        e &= 15;
-        c = t->base + ((uInt)b & inflate_mask[e]);
-        DUMPBITS(e)
-        Tracevv((stderr, "inflate:         * length %u\n", c));
-
-        /* decode distance base of block to copy */
-        GRABBITS(15);           /* max bits for distance code */
-        e = (t = td + ((uInt)b & md))->exop;
-        do {
-          DUMPBITS(t->bits)
-          if (e & 16)
-          {
-            /* get extra bits to add to distance base */
-            e &= 15;
-            GRABBITS(e)         /* get extra bits (up to 13) */
-            d = t->base + ((uInt)b & inflate_mask[e]);
-            DUMPBITS(e)
-            Tracevv((stderr, "inflate:         * distance %u\n", d));
-
-            /* do the copy */
-            m -= c;
-            r = q - d;
-            if (r < s->window)                  /* wrap if needed */
-            {
-              do {
-                r += s->end - s->window;        /* force pointer in window */
-              } while (r < s->window);          /* covers invalid distances */
-              e = s->end - r;
-              if (c > e)
-              {
-                c -= e;                         /* wrapped copy */
-                do {
-                    *q++ = *r++;
-                } while (--e);
-                r = s->window;
-                do {
-                    *q++ = *r++;
-                } while (--c);
-              }
-              else                              /* normal copy */
-              {
-                *q++ = *r++;  c--;
-                *q++ = *r++;  c--;
-                do {
-                    *q++ = *r++;
-                } while (--c);
-              }
-            }
-            else                                /* normal copy */
-            {
-              *q++ = *r++;  c--;
-              *q++ = *r++;  c--;
-              do {
-                *q++ = *r++;
-              } while (--c);
-            }
-            break;
-          }
-          else if ((e & 64) == 0)
-          {
-            t += t->base;
-            e = (t += ((uInt)b & inflate_mask[e]))->exop;
-          }
-          else
-          {
-            z->msg = (char*)"invalid distance code";
-            UNGRAB
-            UPDATE
-            return Z_DATA_ERROR;
-          }
-        } while (1);
-        break;
-      }
-      if ((e & 64) == 0)
-      {
-        t += t->base;
-        if ((e = (t += ((uInt)b & inflate_mask[e]))->exop) == 0)
-        {
-          DUMPBITS(t->bits)
-          Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                    "inflate:         * literal '%c'\n" :
-                    "inflate:         * literal 0x%02x\n", t->base));
-          *q++ = (Byte)t->base;
-          m--;
-          break;
+        if (bits < 15) {
+            hold += (unsigned long)(PUP(in)) << bits;
+            bits += 8;
+            hold += (unsigned long)(PUP(in)) << bits;
+            bits += 8;
         }
-      }
-      else if (e & 32)
-      {
-        Tracevv((stderr, "inflate:         * end of block\n"));
-        UNGRAB
-        UPDATE
-        return Z_STREAM_END;
-      }
-      else
-      {
-        z->msg = (char*)"invalid literal/length code";
-        UNGRAB
-        UPDATE
-        return Z_DATA_ERROR;
-      }
-    } while (1);
-  } while (m >= 258 && n >= 10);
+        this = lcode[hold & lmask];
+      dolen:
+        op = (unsigned)(this.bits);
+        hold >>= op;
+        bits -= op;
+        op = (unsigned)(this.op);
+        if (op == 0) {                          /* literal */
+            Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ?
+                    "inflate:         literal '%c'\n" :
+                    "inflate:         literal 0x%02x\n", this.val));
+            PUP(out) = (unsigned char)(this.val);
+        }
+        else if (op & 16) {                     /* length base */
+            len = (unsigned)(this.val);
+            op &= 15;                           /* number of extra bits */
+            if (op) {
+                if (bits < op) {
+                    hold += (unsigned long)(PUP(in)) << bits;
+                    bits += 8;
+                }
+                len += (unsigned)hold & ((1U << op) - 1);
+                hold >>= op;
+                bits -= op;
+            }
+            Tracevv((stderr, "inflate:         length %u\n", len));
+            if (bits < 15) {
+                hold += (unsigned long)(PUP(in)) << bits;
+                bits += 8;
+                hold += (unsigned long)(PUP(in)) << bits;
+                bits += 8;
+            }
+            this = dcode[hold & dmask];
+          dodist:
+            op = (unsigned)(this.bits);
+            hold >>= op;
+            bits -= op;
+            op = (unsigned)(this.op);
+            if (op & 16) {                      /* distance base */
+                dist = (unsigned)(this.val);
+                op &= 15;                       /* number of extra bits */
+                if (bits < op) {
+                    hold += (unsigned long)(PUP(in)) << bits;
+                    bits += 8;
+                    if (bits < op) {
+                        hold += (unsigned long)(PUP(in)) << bits;
+                        bits += 8;
+                    }
+                }
+                dist += (unsigned)hold & ((1U << op) - 1);
+#ifdef INFLATE_STRICT
+                if (dist > dmax) {
+                    strm->msg = (char *)"invalid distance too far back";
+                    state->mode = BAD;
+                    break;
+                }
+#endif
+                hold >>= op;
+                bits -= op;
+                Tracevv((stderr, "inflate:         distance %u\n", dist));
+                op = (unsigned)(out - beg);     /* max distance in output */
+                if (dist > op) {                /* see if copy from window */
+                    op = dist - op;             /* distance back in window */
+                    if (op > whave) {
+                        strm->msg = (char *)"invalid distance too far back";
+                        state->mode = BAD;
+                        break;
+                    }
+                    from = window - OFF;
+                    if (write == 0) {           /* very common case */
+                        from += wsize - op;
+                        if (op < len) {         /* some from window */
+                            len -= op;
+                            do {
+                                PUP(out) = PUP(from);
+                            } while (--op);
+                            from = out - dist;  /* rest from output */
+                        }
+                    }
+                    else if (write < op) {      /* wrap around window */
+                        from += wsize + write - op;
+                        op -= write;
+                        if (op < len) {         /* some from end of window */
+                            len -= op;
+                            do {
+                                PUP(out) = PUP(from);
+                            } while (--op);
+                            from = window - OFF;
+                            if (write < len) {  /* some from start of window */
+                                op = write;
+                                len -= op;
+                                do {
+                                    PUP(out) = PUP(from);
+                                } while (--op);
+                                from = out - dist;      /* rest from output */
+                            }
+                        }
+                    }
+                    else {                      /* contiguous in window */
+                        from += write - op;
+                        if (op < len) {         /* some from window */
+                            len -= op;
+                            do {
+                                PUP(out) = PUP(from);
+                            } while (--op);
+                            from = out - dist;  /* rest from output */
+                        }
+                    }
+                    while (len > 2) {
+                        PUP(out) = PUP(from);
+                        PUP(out) = PUP(from);
+                        PUP(out) = PUP(from);
+                        len -= 3;
+                    }
+                    if (len) {
+                        PUP(out) = PUP(from);
+                        if (len > 1)
+                            PUP(out) = PUP(from);
+                    }
+                }
+                else {
+                    from = out - dist;          /* copy direct from output */
+                    do {                        /* minimum length is three */
+                        PUP(out) = PUP(from);
+                        PUP(out) = PUP(from);
+                        PUP(out) = PUP(from);
+                        len -= 3;
+                    } while (len > 2);
+                    if (len) {
+                        PUP(out) = PUP(from);
+                        if (len > 1)
+                            PUP(out) = PUP(from);
+                    }
+                }
+            }
+            else if ((op & 64) == 0) {          /* 2nd level distance code */
+                this = dcode[this.val + (hold & ((1U << op) - 1))];
+                goto dodist;
+            }
+            else {
+                strm->msg = (char *)"invalid distance code";
+                state->mode = BAD;
+                break;
+            }
+        }
+        else if ((op & 64) == 0) {              /* 2nd level length code */
+            this = lcode[this.val + (hold & ((1U << op) - 1))];
+            goto dolen;
+        }
+        else if (op & 32) {                     /* end-of-block */
+            Tracevv((stderr, "inflate:         end of block\n"));
+            state->mode = TYPE;
+            break;
+        }
+        else {
+            strm->msg = (char *)"invalid literal/length code";
+            state->mode = BAD;
+            break;
+        }
+    } while (in < last && out < end);
 
-  /* not enough input or output--restore pointers and return */
-  UNGRAB
-  UPDATE
-  return Z_OK;
+    /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+    len = bits >> 3;
+    in -= len;
+    bits -= len << 3;
+    hold &= (1U << bits) - 1;
+
+    /* update state and return */
+    strm->next_in = in + OFF;
+    strm->next_out = out + OFF;
+    strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
+    strm->avail_out = (unsigned)(out < end ?
+                                 257 + (end - out) : 257 - (out - end));
+    state->hold = hold;
+    state->bits = bits;
+    return;
 }
+
+/*
+   inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
+   - Using bit fields for code structure
+   - Different op definition to avoid & for extra bits (do & for table bits)
+   - Three separate decoding do-loops for direct, window, and write == 0
+   - Special case for distance > 1 copies to do overlapped load and store copy
+   - Explicit branch predictions (based on measured branch probabilities)
+   - Deferring match copy and interspersed it with decoding subsequent codes
+   - Swapping literal/length else
+   - Swapping window/direct else
+   - Larger unrolled copy loops (three is about right)
+   - Moving len -= 3 statement into middle of loop
+ */
+
+#endif /* !ASMINF */

zlib/inffast.h

@@ -1,6 +1,6 @@
 /* inffast.h -- header to use inffast.c
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
+ * Copyright (C) 1995-2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
 /* WARNING: this file should *not* be used by applications. It is
@@ -8,10 +8,4 @@
    subject to change. Applications should only use zlib.h.
  */
 
-extern int inflate_fast OF((
-    uInt,
-    uInt,
-    inflate_huft *,
-    inflate_huft *,
-    inflate_blocks_statef *,
-    z_streamp ));
+void inflate_fast OF((z_streamp strm, unsigned start));

zlib/inffixed.h

@@ -1,151 +1,94 @@
-/* inffixed.h -- table for decoding fixed codes
- * Generated automatically by the maketree.c program
- */
+    /* inffixed.h -- table for decoding fixed codes
+     * Generated automatically by makefixed().
+     */
 
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
+    /* WARNING: this file should *not* be used by applications. It
+       is part of the implementation of the compression library and
+       is subject to change. Applications should only use zlib.h.
+     */
 
-local uInt fixed_bl = 9;
-local uInt fixed_bd = 5;
-local inflate_huft fixed_tl[] = {
-    {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
-    {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},192},
-    {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},160},
-    {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},224},
-    {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},144},
-    {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},208},
-    {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},176},
-    {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},240},
-    {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
-    {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},200},
-    {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},168},
-    {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},232},
-    {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},152},
-    {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},216},
-    {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},184},
-    {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},248},
-    {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
-    {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},196},
-    {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},164},
-    {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},228},
-    {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},148},
-    {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},212},
-    {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},180},
-    {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},244},
-    {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
-    {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},204},
-    {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},172},
-    {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},236},
-    {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},156},
-    {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},220},
-    {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},188},
-    {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},252},
-    {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
-    {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},194},
-    {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},162},
-    {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},226},
-    {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},146},
-    {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},210},
-    {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},178},
-    {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},242},
-    {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
-    {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},202},
-    {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},170},
-    {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},234},
-    {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},154},
-    {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},218},
-    {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},186},
-    {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},250},
-    {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
-    {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},198},
-    {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},166},
-    {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},230},
-    {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},150},
-    {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},214},
-    {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},182},
-    {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},246},
-    {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
-    {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},206},
-    {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},174},
-    {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},238},
-    {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},158},
-    {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},222},
-    {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},190},
-    {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},254},
-    {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
-    {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},193},
-    {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},161},
-    {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},225},
-    {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},145},
-    {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},209},
-    {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},177},
-    {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},241},
-    {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
-    {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},201},
-    {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},169},
-    {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},233},
-    {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},153},
-    {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},217},
-    {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},185},
-    {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},249},
-    {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
-    {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},197},
-    {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},165},
-    {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},229},
-    {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},149},
-    {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},213},
-    {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},181},
-    {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},245},
-    {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
-    {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},205},
-    {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},173},
-    {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},237},
-    {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},157},
-    {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},221},
-    {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},189},
-    {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},253},
-    {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
-    {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},195},
-    {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},163},
-    {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},227},
-    {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},147},
-    {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},211},
-    {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},179},
-    {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},243},
-    {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
-    {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},203},
-    {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},171},
-    {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},235},
-    {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},155},
-    {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},219},
-    {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},187},
-    {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},251},
-    {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
-    {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},199},
-    {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},167},
-    {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},231},
-    {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},151},
-    {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},215},
-    {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},183},
-    {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},247},
-    {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
-    {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},207},
-    {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},175},
-    {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},239},
-    {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},159},
-    {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},223},
-    {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},191},
-    {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},255}
-  };
-local inflate_huft fixed_td[] = {
-    {{{80,5}},1}, {{{87,5}},257}, {{{83,5}},17}, {{{91,5}},4097},
-    {{{81,5}},5}, {{{89,5}},1025}, {{{85,5}},65}, {{{93,5}},16385},
-    {{{80,5}},3}, {{{88,5}},513}, {{{84,5}},33}, {{{92,5}},8193},
-    {{{82,5}},9}, {{{90,5}},2049}, {{{86,5}},129}, {{{192,5}},24577},
-    {{{80,5}},2}, {{{87,5}},385}, {{{83,5}},25}, {{{91,5}},6145},
-    {{{81,5}},7}, {{{89,5}},1537}, {{{85,5}},97}, {{{93,5}},24577},
-    {{{80,5}},4}, {{{88,5}},769}, {{{84,5}},49}, {{{92,5}},12289},
-    {{{82,5}},13}, {{{90,5}},3073}, {{{86,5}},193}, {{{192,5}},24577}
-  };
+    static const code lenfix[512] = {
+        {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48},
+        {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128},
+        {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59},
+        {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176},
+        {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20},
+        {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100},
+        {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8},
+        {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216},
+        {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76},
+        {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114},
+        {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},
+        {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148},
+        {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42},
+        {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86},
+        {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15},
+        {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236},
+        {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62},
+        {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
+        {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31},
+        {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162},
+        {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25},
+        {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105},
+        {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4},
+        {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202},
+        {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69},
+        {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125},
+        {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13},
+        {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195},
+        {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35},
+        {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91},
+        {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19},
+        {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246},
+        {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55},
+        {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135},
+        {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99},
+        {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190},
+        {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16},
+        {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96},
+        {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6},
+        {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209},
+        {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},
+        {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116},
+        {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4},
+        {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153},
+        {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44},
+        {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82},
+        {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11},
+        {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
+        {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58},
+        {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138},
+        {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51},
+        {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173},
+        {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30},
+        {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110},
+        {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0},
+        {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195},
+        {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65},
+        {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121},
+        {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},
+        {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258},
+        {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37},
+        {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93},
+        {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23},
+        {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251},
+        {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51},
+        {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
+        {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67},
+        {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183},
+        {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23},
+        {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103},
+        {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9},
+        {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223},
+        {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79},
+        {0,9,255}
+    };
+
+    static const code distfix[32] = {
+        {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025},
+        {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193},
+        {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385},
+        {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577},
+        {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073},
+        {22,5,193},{64,5,0}
+    };

zlib/inflate.h

@@ -0,0 +1,119 @@
+/* inflate.h -- internal inflate state definition
+ * Copyright (C) 1995-2004 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* define NO_GZIP when compiling if you want to disable gzip header and
+   trailer decoding by inflate().  NO_GZIP would be used to avoid linking in
+   the crc code when it is not needed.  For shared libraries, gzip decoding
+   should be left enabled. */
+#ifndef NO_GZIP
+#  define GUNZIP
+#endif
+
+#ifdef BAD /* For AIX */
+#undef BAD
+#endif
+
+/* Possible inflate modes between inflate() calls */
+typedef enum {
+    HEAD,       /* i: waiting for magic header */
+    FLAGS,      /* i: waiting for method and flags (gzip) */
+    TIME,       /* i: waiting for modification time (gzip) */
+    OS,         /* i: waiting for extra flags and operating system (gzip) */
+    EXLEN,      /* i: waiting for extra length (gzip) */
+    EXTRA,      /* i: waiting for extra bytes (gzip) */
+    NAME,       /* i: waiting for end of file name (gzip) */
+    COMMENT,    /* i: waiting for end of comment (gzip) */
+    HCRC,       /* i: waiting for header crc (gzip) */
+    DICTID,     /* i: waiting for dictionary check value */
+    DICT,       /* waiting for inflateSetDictionary() call */
+        TYPE,       /* i: waiting for type bits, including last-flag bit */
+        TYPEDO,     /* i: same, but skip check to exit inflate on new block */
+        STORED,     /* i: waiting for stored size (length and complement) */
+        COPY,       /* i/o: waiting for input or output to copy stored block */
+        TABLE,      /* i: waiting for dynamic block table lengths */
+        LENLENS,    /* i: waiting for code length code lengths */
+        CODELENS,   /* i: waiting for length/lit and distance code lengths */
+            LEN,        /* i: waiting for length/lit code */
+            LENEXT,     /* i: waiting for length extra bits */
+            DIST,       /* i: waiting for distance code */
+            DISTEXT,    /* i: waiting for distance extra bits */
+            MATCH,      /* o: waiting for output space to copy string */
+            LIT,        /* o: waiting for output space to write literal */
+    CHECK,      /* i: waiting for 32-bit check value */
+    LENGTH,     /* i: waiting for 32-bit length (gzip) */
+    DONE,       /* finished check, done -- remain here until reset */
+    BAD,        /* got a data error -- remain here until reset */
+    MEM,        /* got an inflate() memory error -- remain here until reset */
+    SYNC        /* looking for synchronization bytes to restart inflate() */
+} inflate_mode;
+
+/*
+    State transitions between above modes -
+
+    (most modes can go to the BAD or MEM mode -- not shown for clarity)
+
+    Process header:
+        HEAD -> (gzip) or (zlib)
+        (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME
+        NAME -> COMMENT -> HCRC -> TYPE
+        (zlib) -> DICTID or TYPE
+        DICTID -> DICT -> TYPE
+    Read deflate blocks:
+            TYPE -> STORED or TABLE or LEN or CHECK
+            STORED -> COPY -> TYPE
+            TABLE -> LENLENS -> CODELENS -> LEN
+    Read deflate codes:
+                LEN -> LENEXT or LIT or TYPE
+                LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
+                LIT -> LEN
+    Process trailer:
+        CHECK -> LENGTH -> DONE
+ */
+
+/* state maintained between inflate() calls.  Approximately 7K bytes. */
+struct inflate_state {
+    inflate_mode mode;          /* current inflate mode */
+    int last;                   /* true if processing last block */
+    int wrap;                   /* bit 0 true for zlib, bit 1 true for gzip */
+    int havedict;               /* true if dictionary provided */
+    int flags;                  /* gzip header method and flags (0 if zlib) */
+    unsigned dmax;              /* zlib header max distance (INFLATE_STRICT) */
+    unsigned long check;        /* protected copy of check value */
+    unsigned long total;        /* protected copy of output count */
+    gz_headerp head;            /* where to save gzip header information */
+        /* sliding window */
+    unsigned wbits;             /* log base 2 of requested window size */
+    unsigned wsize;             /* window size or zero if not using window */
+    unsigned whave;             /* valid bytes in the window */
+    unsigned write;             /* window write index */
+    unsigned char FAR *window;  /* allocated sliding window, if needed */
+        /* bit accumulator */
+    unsigned long hold;         /* input bit accumulator */
+    unsigned bits;              /* number of bits in "in" */
+        /* for string and stored block copying */
+    unsigned length;            /* literal or length of data to copy */
+    unsigned offset;            /* distance back to copy string from */
+        /* for table and code decoding */
+    unsigned extra;             /* extra bits needed */
+        /* fixed and dynamic code tables */
+    code const FAR *lencode;    /* starting table for length/literal codes */
+    code const FAR *distcode;   /* starting table for distance codes */
+    unsigned lenbits;           /* index bits for lencode */
+    unsigned distbits;          /* index bits for distcode */
+        /* dynamic table building */
+    unsigned ncode;             /* number of code length code lengths */
+    unsigned nlen;              /* number of length code lengths */
+    unsigned ndist;             /* number of distance code lengths */
+    unsigned have;              /* number of code lengths in lens[] */
+    code FAR *next;             /* next available space in codes[] */
+    unsigned short lens[320];   /* temporary storage for code lengths */
+    unsigned short work[288];   /* work area for code table building */
+    code codes[ENOUGH];         /* space for code tables */
+};

zlib/inftrees.c

@@ -1,454 +1,329 @@
 /* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
+ * Copyright (C) 1995-2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
 #include "zutil.h"
 #include "inftrees.h"
 
-#if !defined(BUILDFIXED) && !defined(STDC)
-#  define BUILDFIXED   /* non ANSI compilers may not accept inffixed.h */
-#endif
+#define MAXBITS 15
 
 const char inflate_copyright[] =
-   " inflate 1.1.4 Copyright 1995-2002 Mark Adler ";
+   " inflate 1.2.3 Copyright 1995-2005 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
   include such an acknowledgment, I would appreciate that you keep this
   copyright string in the executable of your product.
  */
-struct internal_state  {int dummy;}; /* for buggy compilers */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-
-local int huft_build OF((
-    uIntf *,            /* code lengths in bits */
-    uInt,               /* number of codes */
-    uInt,               /* number of "simple" codes */
-    const uIntf *,      /* list of base values for non-simple codes */
-    const uIntf *,      /* list of extra bits for non-simple codes */
-    inflate_huft * FAR*,/* result: starting table */
-    uIntf *,            /* maximum lookup bits (returns actual) */
-    inflate_huft *,     /* space for trees */
-    uInt *,             /* hufts used in space */
-    uIntf * ));         /* space for values */
-
-/* Tables for deflate from PKZIP's appnote.txt. */
-local const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */
-        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
-        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
-        /* see note #13 above about 258 */
-local const uInt cplext[31] = { /* Extra bits for literal codes 257..285 */
-        0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
-        3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */
-local const uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */
-        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
-        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
-        8193, 12289, 16385, 24577};
-local const uInt cpdext[30] = { /* Extra bits for distance codes */
-        0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
-        7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
-        12, 12, 13, 13};
 
 /*
-   Huffman code decoding is performed using a multi-level table lookup.
-   The fastest way to decode is to simply build a lookup table whose
-   size is determined by the longest code.  However, the time it takes
-   to build this table can also be a factor if the data being decoded
-   is not very long.  The most common codes are necessarily the
-   shortest codes, so those codes dominate the decoding time, and hence
-   the speed.  The idea is you can have a shorter table that decodes the
-   shorter, more probable codes, and then point to subsidiary tables for
-   the longer codes.  The time it costs to decode the longer codes is
-   then traded against the time it takes to make longer tables.
-
-   This results of this trade are in the variables lbits and dbits
-   below.  lbits is the number of bits the first level table for literal/
-   length codes can decode in one step, and dbits is the same thing for
-   the distance codes.  Subsequent tables are also less than or equal to
-   those sizes.  These values may be adjusted either when all of the
-   codes are shorter than that, in which case the longest code length in
-   bits is used, or when the shortest code is *longer* than the requested
-   table size, in which case the length of the shortest code in bits is
-   used.
-
-   There are two different values for the two tables, since they code a
-   different number of possibilities each.  The literal/length table
-   codes 286 possible values, or in a flat code, a little over eight
-   bits.  The distance table codes 30 possible values, or a little less
-   than five bits, flat.  The optimum values for speed end up being
-   about one bit more than those, so lbits is 8+1 and dbits is 5+1.
-   The optimum values may differ though from machine to machine, and
-   possibly even between compilers.  Your mileage may vary.
+   Build a set of tables to decode the provided canonical Huffman code.
+   The code lengths are lens[0..codes-1].  The result starts at *table,
+   whose indices are 0..2^bits-1.  work is a writable array of at least
+   lens shorts, which is used as a work area.  type is the type of code
+   to be generated, CODES, LENS, or DISTS.  On return, zero is success,
+   -1 is an invalid code, and +1 means that ENOUGH isn't enough.  table
+   on return points to the next available entry's address.  bits is the
+   requested root table index bits, and on return it is the actual root
+   table index bits.  It will differ if the request is greater than the
+   longest code or if it is less than the shortest code.
  */
-
-
-/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
-#define BMAX 15         /* maximum bit length of any code */
-
-local int huft_build(b, n, s, d, e, t, m, hp, hn, v)
-uIntf *b;               /* code lengths in bits (all assumed <= BMAX) */
-uInt n;                 /* number of codes (assumed <= 288) */
-uInt s;                 /* number of simple-valued codes (0..s-1) */
-const uIntf *d;         /* list of base values for non-simple codes */
-const uIntf *e;         /* list of extra bits for non-simple codes */
-inflate_huft * FAR *t;  /* result: starting table */
-uIntf *m;               /* maximum lookup bits, returns actual */
-inflate_huft *hp;       /* space for trees */
-uInt *hn;               /* hufts used in space */
-uIntf *v;               /* working area: values in order of bit length */
-/* Given a list of code lengths and a maximum table size, make a set of
-   tables to decode that set of codes.  Return Z_OK on success, Z_BUF_ERROR
-   if the given code set is incomplete (the tables are still built in this
-   case), or Z_DATA_ERROR if the input is invalid. */
+int inflate_table(type, lens, codes, table, bits, work)
+codetype type;
+unsigned short FAR *lens;
+unsigned codes;
+code FAR * FAR *table;
+unsigned FAR *bits;
+unsigned short FAR *work;
 {
+    unsigned len;               /* a code's length in bits */
+    unsigned sym;               /* index of code symbols */
+    unsigned min, max;          /* minimum and maximum code lengths */
+    unsigned root;              /* number of index bits for root table */
+    unsigned curr;              /* number of index bits for current table */
+    unsigned drop;              /* code bits to drop for sub-table */
+    int left;                   /* number of prefix codes available */
+    unsigned used;              /* code entries in table used */
+    unsigned huff;              /* Huffman code */
+    unsigned incr;              /* for incrementing code, index */
+    unsigned fill;              /* index for replicating entries */
+    unsigned low;               /* low bits for current root entry */
+    unsigned mask;              /* mask for low root bits */
+    code this;                  /* table entry for duplication */
+    code FAR *next;             /* next available space in table */
+    const unsigned short FAR *base;     /* base value table to use */
+    const unsigned short FAR *extra;    /* extra bits table to use */
+    int end;                    /* use base and extra for symbol > end */
+    unsigned short count[MAXBITS+1];    /* number of codes of each length */
+    unsigned short offs[MAXBITS+1];     /* offsets in table for each length */
+    static const unsigned short lbase[31] = { /* Length codes 257..285 base */
+        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
+    static const unsigned short lext[31] = { /* Length codes 257..285 extra */
+        16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 201, 196};
+    static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
+        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+        8193, 12289, 16385, 24577, 0, 0};
+    static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
+        16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
+        23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
+        28, 28, 29, 29, 64, 64};
 
-  uInt a;                       /* counter for codes of length k */
-  uInt c[BMAX+1];               /* bit length count table */
-  uInt f;                       /* i repeats in table every f entries */
-  int g;                        /* maximum code length */
-  int h;                        /* table level */
-  register uInt i;              /* counter, current code */
-  register uInt j;              /* counter */
-  register int k;               /* number of bits in current code */
-  int l;                        /* bits per table (returned in m) */
-  uInt mask;                    /* (1 << w) - 1, to avoid cc -O bug on HP */
-  register uIntf *p;            /* pointer into c[], b[], or v[] */
-  inflate_huft *q;              /* points to current table */
-  struct inflate_huft_s r;      /* table entry for structure assignment */
-  inflate_huft *u[BMAX];        /* table stack */
-  register int w;               /* bits before this table == (l * h) */
-  uInt x[BMAX+1];               /* bit offsets, then code stack */
-  uIntf *xp;                    /* pointer into x */
-  int y;                        /* number of dummy codes added */
-  uInt z;                       /* number of entries in current table */
+    /*
+       Process a set of code lengths to create a canonical Huffman code.  The
+       code lengths are lens[0..codes-1].  Each length corresponds to the
+       symbols 0..codes-1.  The Huffman code is generated by first sorting the
+       symbols by length from short to long, and retaining the symbol order
+       for codes with equal lengths.  Then the code starts with all zero bits
+       for the first code of the shortest length, and the codes are integer
+       increments for the same length, and zeros are appended as the length
+       increases.  For the deflate format, these bits are stored backwards
+       from their more natural integer increment ordering, and so when the
+       decoding tables are built in the large loop below, the integer codes
+       are incremented backwards.
 
+       This routine assumes, but does not check, that all of the entries in
+       lens[] are in the range 0..MAXBITS.  The caller must assure this.
+       1..MAXBITS is interpreted as that code length.  zero means that that
+       symbol does not occur in this code.
 
-  /* Generate counts for each bit length */
-  p = c;
-#define C0 *p++ = 0;
-#define C2 C0 C0 C0 C0
-#define C4 C2 C2 C2 C2
-  C4                            /* clear c[]--assume BMAX+1 is 16 */
-  p = b;  i = n;
-  do {
-    c[*p++]++;                  /* assume all entries <= BMAX */
-  } while (--i);
-  if (c[0] == n)                /* null input--all zero length codes */
-  {
-    *t = (inflate_huft *)Z_NULL;
-    *m = 0;
-    return Z_OK;
-  }
+       The codes are sorted by computing a count of codes for each length,
+       creating from that a table of starting indices for each length in the
+       sorted table, and then entering the symbols in order in the sorted
+       table.  The sorted table is work[], with that space being provided by
+       the caller.
 
+       The length counts are used for other purposes as well, i.e. finding
+       the minimum and maximum length codes, determining if there are any
+       codes at all, checking for a valid set of lengths, and looking ahead
+       at length counts to determine sub-table sizes when building the
+       decoding tables.
+     */
 
-  /* Find minimum and maximum length, bound *m by those */
-  l = *m;
-  for (j = 1; j <= BMAX; j++)
-    if (c[j])
-      break;
-  k = j;                        /* minimum code length */
-  if ((uInt)l < j)
-    l = j;
-  for (i = BMAX; i; i--)
-    if (c[i])
-      break;
-  g = i;                        /* maximum code length */
-  if ((uInt)l > i)
-    l = i;
-  *m = l;
+    /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
+    for (len = 0; len <= MAXBITS; len++)
+        count[len] = 0;
+    for (sym = 0; sym < codes; sym++)
+        count[lens[sym]]++;
 
+    /* bound code lengths, force root to be within code lengths */
+    root = *bits;
+    for (max = MAXBITS; max >= 1; max--)
+        if (count[max] != 0) break;
+    if (root > max) root = max;
+    if (max == 0) {                     /* no symbols to code at all */
+        this.op = (unsigned char)64;    /* invalid code marker */
+        this.bits = (unsigned char)1;
+        this.val = (unsigned short)0;
+        *(*table)++ = this;             /* make a table to force an error */
+        *(*table)++ = this;
+        *bits = 1;
+        return 0;     /* no symbols, but wait for decoding to report error */
+    }
+    for (min = 1; min <= MAXBITS; min++)
+        if (count[min] != 0) break;
+    if (root < min) root = min;
 
-  /* Adjust last length count to fill out codes, if needed */
-  for (y = 1 << j; j < i; j++, y <<= 1)
-    if ((y -= c[j]) < 0)
-      return Z_DATA_ERROR;
-  if ((y -= c[i]) < 0)
-    return Z_DATA_ERROR;
-  c[i] += y;
+    /* check for an over-subscribed or incomplete set of lengths */
+    left = 1;
+    for (len = 1; len <= MAXBITS; len++) {
+        left <<= 1;
+        left -= count[len];
+        if (left < 0) return -1;        /* over-subscribed */
+    }
+    if (left > 0 && (type == CODES || max != 1))
+        return -1;                      /* incomplete set */
 
+    /* generate offsets into symbol table for each length for sorting */
+    offs[1] = 0;
+    for (len = 1; len < MAXBITS; len++)
+        offs[len + 1] = offs[len] + count[len];
 
-  /* Generate starting offsets into the value table for each length */
-  x[1] = j = 0;
-  p = c + 1;  xp = x + 2;
-  while (--i) {                 /* note that i == g from above */
-    *xp++ = (j += *p++);
-  }
+    /* sort symbols by length, by symbol order within each length */
+    for (sym = 0; sym < codes; sym++)
+        if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
 
+    /*
+       Create and fill in decoding tables.  In this loop, the table being
+       filled is at next and has curr index bits.  The code being used is huff
+       with length len.  That code is converted to an index by dropping drop
+       bits off of the bottom.  For codes where len is less than drop + curr,
+       those top drop + curr - len bits are incremented through all values to
+       fill the table with replicated entries.
 
-  /* Make a table of values in order of bit lengths */
-  p = b;  i = 0;
-  do {
-    if ((j = *p++) != 0)
-      v[x[j]++] = i;
-  } while (++i < n);
-  n = x[g];                     /* set n to length of v */
+       root is the number of index bits for the root table.  When len exceeds
+       root, sub-tables are created pointed to by the root entry with an index
+       of the low root bits of huff.  This is saved in low to check for when a
+       new sub-table should be started.  drop is zero when the root table is
+       being filled, and drop is root when sub-tables are being filled.
 
+       When a new sub-table is needed, it is necessary to look ahead in the
+       code lengths to determine what size sub-table is needed.  The length
+       counts are used for this, and so count[] is decremented as codes are
+       entered in the tables.
 
-  /* Generate the Huffman codes and for each, make the table entries */
-  x[0] = i = 0;                 /* first Huffman code is zero */
-  p = v;                        /* grab values in bit order */
-  h = -1;                       /* no tables yet--level -1 */
-  w = -l;                       /* bits decoded == (l * h) */
-  u[0] = (inflate_huft *)Z_NULL;        /* just to keep compilers happy */
-  q = (inflate_huft *)Z_NULL;   /* ditto */
-  z = 0;                        /* ditto */
+       used keeps track of how many table entries have been allocated from the
+       provided *table space.  It is checked when a LENS table is being made
+       against the space in *table, ENOUGH, minus the maximum space needed by
+       the worst case distance code, MAXD.  This should never happen, but the
+       sufficiency of ENOUGH has not been proven exhaustively, hence the check.
+       This assumes that when type == LENS, bits == 9.
 
-  /* go through the bit lengths (k already is bits in shortest code) */
-  for (; k <= g; k++)
-  {
-    a = c[k];
-    while (a--)
-    {
-      /* here i is the Huffman code of length k bits for value *p */
-      /* make tables up to required level */
-      while (k > w + l)
-      {
-        h++;
-        w += l;                 /* previous table always l bits */
+       sym increments through all symbols, and the loop terminates when
+       all codes of length max, i.e. all codes, have been processed.  This
+       routine permits incomplete codes, so another loop after this one fills
+       in the rest of the decoding tables with invalid code markers.
+     */
 
-        /* compute minimum size table less than or equal to l bits */
-        z = g - w;
-        z = z > (uInt)l ? (uInt)l : z;  /* table size upper limit */
-        if ((f = 1 << (j = k - w)) > a + 1)     /* try a k-w bit table */
-        {                       /* too few codes for k-w bit table */
-          f -= a + 1;           /* deduct codes from patterns left */
-          xp = c + k;
-          if (j < z)
-            while (++j < z)     /* try smaller tables up to z bits */
-            {
-              if ((f <<= 1) <= *++xp)
-                break;          /* enough codes to use up j bits */
-              f -= *xp;         /* else deduct codes from patterns */
-            }
+    /* set up for code type */
+    switch (type) {
+    case CODES:
+        base = extra = work;    /* dummy value--not used */
+        end = 19;
+        break;
+    case LENS:
+        base = lbase;
+        base -= 257;
+        extra = lext;
+        extra -= 257;
+        end = 256;
+        break;
+    default:            /* DISTS */
+        base = dbase;
+        extra = dext;
+        end = -1;
+    }
+
+    /* initialize state for loop */
+    huff = 0;                   /* starting code */
+    sym = 0;                    /* starting code symbol */
+    len = min;                  /* starting code length */
+    next = *table;              /* current table to fill in */
+    curr = root;                /* current table index bits */
+    drop = 0;                   /* current bits to drop from code for index */
+    low = (unsigned)(-1);       /* trigger new sub-table when len > root */
+    used = 1U << root;          /* use root table entries */
+    mask = used - 1;            /* mask for comparing low */
+
+    /* check available table space */
+    if (type == LENS && used >= ENOUGH - MAXD)
+        return 1;
+
+    /* process all codes and make table entries */
+    for (;;) {
+        /* create table entry */
+        this.bits = (unsigned char)(len - drop);
+        if ((int)(work[sym]) < end) {
+            this.op = (unsigned char)0;
+            this.val = work[sym];
+        }
+        else if ((int)(work[sym]) > end) {
+            this.op = (unsigned char)(extra[work[sym]]);
+            this.val = base[work[sym]];
+        }
+        else {
+            this.op = (unsigned char)(32 + 64);         /* end of block */
+            this.val = 0;
         }
-        z = 1 << j;             /* table entries for j-bit table */
 
-        /* allocate new table */
-        if (*hn + z > MANY)     /* (note: doesn't matter for fixed) */
-          return Z_DATA_ERROR;  /* overflow of MANY */
-        u[h] = q = hp + *hn;
-        *hn += z;
+        /* replicate for those indices with low len bits equal to huff */
+        incr = 1U << (len - drop);
+        fill = 1U << curr;
+        min = fill;                 /* save offset to next table */
+        do {
+            fill -= incr;
+            next[(huff >> drop) + fill] = this;
+        } while (fill != 0);
 
-        /* connect to last table, if there is one */
-        if (h)
-        {
-          x[h] = i;             /* save pattern for backing up */
-          r.bits = (Byte)l;     /* bits to dump before this table */
-          r.exop = (Byte)j;     /* bits in this table */
-          j = i >> (w - l);
-          r.base = (uInt)(q - u[h-1] - j);   /* offset to this table */
-          u[h-1][j] = r;        /* connect to last table */
+        /* backwards increment the len-bit code huff */
+        incr = 1U << (len - 1);
+        while (huff & incr)
+            incr >>= 1;
+        if (incr != 0) {
+            huff &= incr - 1;
+            huff += incr;
         }
         else
-          *t = q;               /* first table is returned result */
-      }
+            huff = 0;
 
-      /* set up table entry in r */
-      r.bits = (Byte)(k - w);
-      if (p >= v + n)
-        r.exop = 128 + 64;      /* out of values--invalid code */
-      else if (*p < s)
-      {
-        r.exop = (Byte)(*p < 256 ? 0 : 32 + 64);     /* 256 is end-of-block */
-        r.base = *p++;          /* simple code is just the value */
-      }
-      else
-      {
-        r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */
-        r.base = d[*p++ - s];
-      }
+        /* go to next symbol, update count, len */
+        sym++;
+        if (--(count[len]) == 0) {
+            if (len == max) break;
+            len = lens[work[sym]];
+        }
 
-      /* fill code-like entries with r */
-      f = 1 << (k - w);
-      for (j = i >> w; j < z; j += f)
-        q[j] = r;
+        /* create new sub-table if needed */
+        if (len > root && (huff & mask) != low) {
+            /* if first time, transition to sub-tables */
+            if (drop == 0)
+                drop = root;
 
-      /* backwards increment the k-bit code i */
-      for (j = 1 << (k - 1); i & j; j >>= 1)
-        i ^= j;
-      i ^= j;
+            /* increment past last table */
+            next += min;            /* here min is 1 << curr */
 
-      /* backup over finished tables */
-      mask = (1 << w) - 1;      /* needed on HP, cc -O bug */
-      while ((i & mask) != x[h])
-      {
-        h--;                    /* don't need to update q */
-        w -= l;
-        mask = (1 << w) - 1;
-      }
+            /* determine length of next table */
+            curr = len - drop;
+            left = (int)(1 << curr);
+            while (curr + drop < max) {
+                left -= count[curr + drop];
+                if (left <= 0) break;
+                curr++;
+                left <<= 1;
+            }
+
+            /* check for enough space */
+            used += 1U << curr;
+            if (type == LENS && used >= ENOUGH - MAXD)
+                return 1;
+
+            /* point entry in root table to sub-table */
+            low = huff & mask;
+            (*table)[low].op = (unsigned char)curr;
+            (*table)[low].bits = (unsigned char)root;
+            (*table)[low].val = (unsigned short)(next - *table);
+        }
     }
-  }
 
+    /*
+       Fill in rest of table for incomplete codes.  This loop is similar to the
+       loop above in incrementing huff for table indices.  It is assumed that
+       len is equal to curr + drop, so there is no loop needed to increment
+       through high index bits.  When the current sub-table is filled, the loop
+       drops back to the root table to fill in any remaining entries there.
+     */
+    this.op = (unsigned char)64;                /* invalid code marker */
+    this.bits = (unsigned char)(len - drop);
+    this.val = (unsigned short)0;
+    while (huff != 0) {
+        /* when done with sub-table, drop back to root table */
+        if (drop != 0 && (huff & mask) != low) {
+            drop = 0;
+            len = root;
+            next = *table;
+            this.bits = (unsigned char)len;
+        }
 
-  /* Return Z_BUF_ERROR if we were given an incomplete table */
-  return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
-}
-
-
-int inflate_trees_bits(c, bb, tb, hp, z)
-uIntf *c;               /* 19 code lengths */
-uIntf *bb;              /* bits tree desired/actual depth */
-inflate_huft * FAR *tb; /* bits tree result */
-inflate_huft *hp;       /* space for trees */
-z_streamp z;            /* for messages */
-{
-  int r;
-  uInt hn = 0;          /* hufts used in space */
-  uIntf *v;             /* work area for huft_build */
-
-  if ((v = (uIntf*)ZALLOC(z, 19, sizeof(uInt))) == Z_NULL)
-    return Z_MEM_ERROR;
-  r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL,
-                 tb, bb, hp, &hn, v);
-  if (r == Z_DATA_ERROR)
-    z->msg = (char*)"oversubscribed dynamic bit lengths tree";
-  else if (r == Z_BUF_ERROR || *bb == 0)
-  {
-    z->msg = (char*)"incomplete dynamic bit lengths tree";
-    r = Z_DATA_ERROR;
-  }
-  ZFREE(z, v);
-  return r;
-}
-
-
-int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, hp, z)
-uInt nl;                /* number of literal/length codes */
-uInt nd;                /* number of distance codes */
-uIntf *c;               /* that many (total) code lengths */
-uIntf *bl;              /* literal desired/actual bit depth */
-uIntf *bd;              /* distance desired/actual bit depth */
-inflate_huft * FAR *tl; /* literal/length tree result */
-inflate_huft * FAR *td; /* distance tree result */
-inflate_huft *hp;       /* space for trees */
-z_streamp z;            /* for messages */
-{
-  int r;
-  uInt hn = 0;          /* hufts used in space */
-  uIntf *v;             /* work area for huft_build */
-
-  /* allocate work area */
-  if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
-    return Z_MEM_ERROR;
-
-  /* build literal/length tree */
-  r = huft_build(c, nl, 257, cplens, cplext, tl, bl, hp, &hn, v);
-  if (r != Z_OK || *bl == 0)
-  {
-    if (r == Z_DATA_ERROR)
-      z->msg = (char*)"oversubscribed literal/length tree";
-    else if (r != Z_MEM_ERROR)
-    {
-      z->msg = (char*)"incomplete literal/length tree";
-      r = Z_DATA_ERROR;
-    }
-    ZFREE(z, v);
-    return r;
-  }
-
-  /* build distance tree */
-  r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, hp, &hn, v);
-  if (r != Z_OK || (*bd == 0 && nl > 257))
-  {
-    if (r == Z_DATA_ERROR)
-      z->msg = (char*)"oversubscribed distance tree";
-    else if (r == Z_BUF_ERROR) {
-#ifdef PKZIP_BUG_WORKAROUND
-      r = Z_OK;
-    }
-#else
-      z->msg = (char*)"incomplete distance tree";
-      r = Z_DATA_ERROR;
-    }
-    else if (r != Z_MEM_ERROR)
-    {
-      z->msg = (char*)"empty distance tree with lengths";
-      r = Z_DATA_ERROR;
-    }
-    ZFREE(z, v);
-    return r;
-#endif
-  }
-
-  /* done */
-  ZFREE(z, v);
-  return Z_OK;
-}
-
-
-/* build fixed tables only once--keep them here */
-#ifdef BUILDFIXED
-local int fixed_built = 0;
-#define FIXEDH 544      /* number of hufts used by fixed tables */
-local inflate_huft fixed_mem[FIXEDH];
-local uInt fixed_bl;
-local uInt fixed_bd;
-local inflate_huft *fixed_tl;
-local inflate_huft *fixed_td;
-#else
-#include "inffixed.h"
-#endif
-
-
-int inflate_trees_fixed(bl, bd, tl, td, z)
-uIntf *bl;               /* literal desired/actual bit depth */
-uIntf *bd;               /* distance desired/actual bit depth */
-inflate_huft * FAR *tl;  /* literal/length tree result */
-inflate_huft * FAR *td;  /* distance tree result */
-UNUSED(z_streamp z);     /* for memory allocation */
-{
-#ifdef BUILDFIXED
-  /* build fixed tables if not already */
-  if (!fixed_built)
-  {
-    int k;              /* temporary variable */
-    uInt f = 0;         /* number of hufts used in fixed_mem */
-    uIntf *c;           /* length list for huft_build */
-    uIntf *v;           /* work area for huft_build */
-
-    /* allocate memory */
-    if ((c = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
-      return Z_MEM_ERROR;
-    if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
-    {
-      ZFREE(z, c);
-      return Z_MEM_ERROR;
-    }
-
-    /* literal table */
-    for (k = 0; k < 144; k++)
-      c[k] = 8;
-    for (; k < 256; k++)
-      c[k] = 9;
-    for (; k < 280; k++)
-      c[k] = 7;
-    for (; k < 288; k++)
-      c[k] = 8;
-    fixed_bl = 9;
-    huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl,
-               fixed_mem, &f, v);
-
-    /* distance table */
-    for (k = 0; k < 30; k++)
-      c[k] = 5;
-    fixed_bd = 5;
-    huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd,
-               fixed_mem, &f, v);
-
-    /* done */
-    ZFREE(z, v);
-    ZFREE(z, c);
-    fixed_built = 1;
-  }
-#endif
-  *bl = fixed_bl;
-  *bd = fixed_bd;
-  *tl = fixed_tl;
-  *td = fixed_td;
-  return Z_OK;
+        /* put invalid code marker in table */
+        next[huff >> drop] = this;
+
+        /* backwards increment the len-bit code huff */
+        incr = 1U << (len - 1);
+        while (huff & incr)
+            incr >>= 1;
+        if (incr != 0) {
+            huff &= incr - 1;
+            huff += incr;
+        }
+        else
+            huff = 0;
+    }
+
+    /* set return parameters */
+    *table += used;
+    *bits = root;
+    return 0;
 }

zlib/inftrees.h

@@ -1,6 +1,6 @@
 /* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
+ * Copyright (C) 1995-2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
 /* WARNING: this file should *not* be used by applications. It is
@@ -8,51 +8,48 @@
    subject to change. Applications should only use zlib.h.
  */
 
-/* Huffman code lookup table entry--this entry is four bytes for machines
-   that have 16-bit pointers (e.g. PC's in the small or medium model). */
+/* Structure for decoding tables.  Each entry provides either the
+   information needed to do the operation requested by the code that
+   indexed that table entry, or it provides a pointer to another
+   table that indexes more bits of the code.  op indicates whether
+   the entry is a pointer to another table, a literal, a length or
+   distance, an end-of-block, or an invalid code.  For a table
+   pointer, the low four bits of op is the number of index bits of
+   that table.  For a length or distance, the low four bits of op
+   is the number of extra bits to get after the code.  bits is
+   the number of bits in this code or part of the code to drop off
+   of the bit buffer.  val is the actual byte to output in the case
+   of a literal, the base length or distance, or the offset from
+   the current table to the next table.  Each entry is four bytes. */
+typedef struct {
+    unsigned char op;           /* operation, extra bits, table bits */
+    unsigned char bits;         /* bits in this part of the code */
+    unsigned short val;         /* offset in table or code value */
+} code;
 
-typedef struct inflate_huft_s FAR inflate_huft;
-
-struct inflate_huft_s {
-  union {
-    struct {
-      Byte Exop;        /* number of extra bits or operation */
-      Byte Bits;        /* number of bits in this code or subcode */
-    } what;
-    uInt pad;           /* pad structure to a power of 2 (4 bytes for */
-  } word;               /*  16-bit, 8 bytes for 32-bit int's) */
-  uInt base;            /* literal, length base, distance base,
-                           or table offset */
-};
+/* op values as set by inflate_table():
+    00000000 - literal
+    0000tttt - table link, tttt != 0 is the number of table index bits
+    0001eeee - length or distance, eeee is the number of extra bits
+    01100000 - end of block
+    01000000 - invalid code
+ */
 
 /* Maximum size of dynamic tree.  The maximum found in a long but non-
-   exhaustive search was 1004 huft structures (850 for length/literals
-   and 154 for distances, the latter actually the result of an
-   exhaustive search).  The actual maximum is not known, but the
-   value below is more than safe. */
-#define MANY 1440
+   exhaustive search was 1444 code structures (852 for length/literals
+   and 592 for distances, the latter actually the result of an
+   exhaustive search).  The true maximum is not known, but the value
+   below is more than safe. */
+#define ENOUGH 2048
+#define MAXD 592
 
-extern int inflate_trees_bits OF((
-    uIntf *,                    /* 19 code lengths */
-    uIntf *,                    /* bits tree desired/actual depth */
-    inflate_huft * FAR *,       /* bits tree result */
-    inflate_huft *,             /* space for trees */
-    z_streamp));                /* for messages */
+/* Type of code to build for inftable() */
+typedef enum {
+    CODES,
+    LENS,
+    DISTS
+} codetype;
 
-extern int inflate_trees_dynamic OF((
-    uInt,                       /* number of literal/length codes */
-    uInt,                       /* number of distance codes */
-    uIntf *,                    /* that many (total) code lengths */
-    uIntf *,                    /* literal desired/actual bit depth */
-    uIntf *,                    /* distance desired/actual bit depth */
-    inflate_huft * FAR *,       /* literal/length tree result */
-    inflate_huft * FAR *,       /* distance tree result */
-    inflate_huft *,             /* space for trees */
-    z_streamp));                /* for messages */
-
-extern int inflate_trees_fixed OF((
-    uIntf *,                    /* literal desired/actual bit depth */
-    uIntf *,                    /* distance desired/actual bit depth */
-    inflate_huft * FAR *,       /* literal/length tree result */
-    inflate_huft * FAR *,       /* distance tree result */
-    z_streamp));                /* for memory allocation */
+extern int inflate_table OF((codetype type, unsigned short FAR *lens,
+                             unsigned codes, code FAR * FAR *table,
+                             unsigned FAR *bits, unsigned short FAR *work));

zlib/infutil.c

@@ -1,87 +0,0 @@
-/* inflate_util.c -- data and routines common to blocks and codes
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-#include "zutil.h"
-#include "infblock.h"
-#include "inftrees.h"
-#include "infcodes.h"
-#include "infutil.h"
-
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
-
-/* And'ing with mask[n] masks the lower n bits */
-uInt inflate_mask[17] = {
-    0x0000,
-    0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
-    0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
-};
-
-
-/* copy as much as possible from the sliding window to the output area */
-int inflate_flush(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
-  uInt n;
-  Bytef *p;
-  Bytef *q;
-
-  /* local copies of source and destination pointers */
-  p = z->next_out;
-  q = s->read;
-
-  /* compute number of bytes to copy as far as end of window */
-  n = (uInt)((q <= s->write ? s->write : s->end) - q);
-  if (n > z->avail_out) n = z->avail_out;
-  if (n && r == Z_BUF_ERROR) r = Z_OK;
-
-  /* update counters */
-  z->avail_out -= n;
-  z->total_out += n;
-
-  /* update check information */
-  if (s->checkfn != Z_NULL)
-    z->adler = s->check = (*s->checkfn)(s->check, q, n);
-
-  /* copy as far as end of window */
-  zmemcpy(p, q, n);
-  p += n;
-  q += n;
-
-  /* see if more to copy at beginning of window */
-  if (q == s->end)
-  {
-    /* wrap pointers */
-    q = s->window;
-    if (s->write == s->end)
-      s->write = s->window;
-
-    /* compute bytes to copy */
-    n = (uInt)(s->write - q);
-    if (n > z->avail_out) n = z->avail_out;
-    if (n && r == Z_BUF_ERROR) r = Z_OK;
-
-    /* update counters */
-    z->avail_out -= n;
-    z->total_out += n;
-
-    /* update check information */
-    if (s->checkfn != Z_NULL)
-      z->adler = s->check = (*s->checkfn)(s->check, q, n);
-
-    /* copy */
-    zmemcpy(p, q, n);
-    p += n;
-    q += n;
-  }
-
-  /* update pointers */
-  z->next_out = p;
-  s->read = q;
-
-  /* done */
-  return r;
-}

zlib/infutil.h

@@ -1,98 +0,0 @@
-/* infutil.h -- types and macros common to blocks and codes
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-#ifndef _INFUTIL_H
-#define _INFUTIL_H
-
-typedef enum {
-      TYPE,     /* get type bits (3, including end bit) */
-      LENS,     /* get lengths for stored */
-      STORED,   /* processing stored block */
-      TABLE,    /* get table lengths */
-      BTREE,    /* get bit lengths tree for a dynamic block */
-      DTREE,    /* get length, distance trees for a dynamic block */
-      CODES,    /* processing fixed or dynamic block */
-      DRY,      /* output remaining window bytes */
-      DONE,     /* finished last block, done */
-      zBAD}      /* got a data error--stuck here */
-inflate_block_mode;
-
-/* inflate blocks semi-private state */
-struct inflate_blocks_state {
-
-  /* mode */
-  inflate_block_mode  mode;     /* current inflate_block mode */
-
-  /* mode dependent information */
-  union {
-    uInt left;          /* if STORED, bytes left to copy */
-    struct {
-      uInt table;               /* table lengths (14 bits) */
-      uInt index;               /* index into blens (or border) */
-      uIntf *blens;             /* bit lengths of codes */
-      uInt bb;                  /* bit length tree depth */
-      inflate_huft *tb;         /* bit length decoding tree */
-    } trees;            /* if DTREE, decoding info for trees */
-    struct {
-      inflate_codes_statef 
-         *codes;
-    } decode;           /* if CODES, current state */
-  } sub;                /* submode */
-  uInt last;            /* true if this block is the last block */
-
-  /* mode independent information */
-  uInt bitk;            /* bits in bit buffer */
-  uLong bitb;           /* bit buffer */
-  inflate_huft *hufts;  /* single malloc for tree space */
-  Bytef *window;        /* sliding window */
-  Bytef *end;           /* one byte after sliding window */
-  Bytef *read;          /* window read pointer */
-  Bytef *write;         /* window write pointer */
-  check_func checkfn;   /* check function */
-  uLong check;          /* check on output */
-
-};
-
-
-/* defines for inflate input/output */
-/*   update pointers and return */
-#define UPDBITS {s->bitb=b;s->bitk=k;}
-#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;}
-#define UPDOUT {s->write=q;}
-#define UPDATE {UPDBITS UPDIN UPDOUT}
-#define LEAVE {UPDATE return inflate_flush(s,z,r);}
-/*   get bytes and bits */
-#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
-#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
-#define NEXTBYTE (n--,*p++)
-#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define DUMPBITS(j) {b>>=(j);k-=(j);}
-/*   output bytes */
-#define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q)
-#define LOADOUT {q=s->write;m=(uInt)WAVAIL;}
-#define ZWRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}}
-#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
-#define NEEDOUT {if(m==0){ZWRAP if(m==0){FLUSH ZWRAP if(m==0) LEAVE}}r=Z_OK;}
-#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
-/*   load local pointers */
-#define LOAD {LOADIN LOADOUT}
-
-/* masks for lower bits (size given to avoid silly warnings with Visual C++) */
-extern uInt inflate_mask[17];
-
-/* copy as much as possible from the sliding window to the output area */
-extern int inflate_flush OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    int));
-
-struct internal_state      {int dummy;}; /* for buggy compilers */
-
-#endif

zlib/trees.c

@@ -1,6 +1,6 @@
 /* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-2002 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h 
+ * Copyright (C) 1995-2005 Jean-loup Gailly
+ * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
 /*
@@ -230,9 +230,6 @@ local void send_bits(s, value, length)
 #endif /* DEBUG */
 
 
-#ifndef MAX
-#define MAX(a,b) ((a) >= (b) ? (a) : (b))
-#endif
 /* the arguments must not have side effects */
 
 /* ===========================================================================
@@ -337,42 +334,42 @@ void gen_trees_header()
 
     Assert (header != NULL, "Can't open trees.h");
     fprintf(header,
-	    "/* header created automatically with -DGEN_TREES_H */\n\n");
+            "/* header created automatically with -DGEN_TREES_H */\n\n");
 
     fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n");
     for (i = 0; i < L_CODES+2; i++) {
-	fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code,
-		static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5));
+        fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code,
+                static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5));
     }
 
     fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n");
     for (i = 0; i < D_CODES; i++) {
-	fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code,
-		static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
+        fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code,
+                static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
     }
 
     fprintf(header, "const uch _dist_code[DIST_CODE_LEN] = {\n");
     for (i = 0; i < DIST_CODE_LEN; i++) {
-	fprintf(header, "%2u%s", _dist_code[i],
-		SEPARATOR(i, DIST_CODE_LEN-1, 20));
+        fprintf(header, "%2u%s", _dist_code[i],
+                SEPARATOR(i, DIST_CODE_LEN-1, 20));
     }
 
     fprintf(header, "const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
     for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
-	fprintf(header, "%2u%s", _length_code[i],
-		SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
+        fprintf(header, "%2u%s", _length_code[i],
+                SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
     }
 
     fprintf(header, "local const int base_length[LENGTH_CODES] = {\n");
     for (i = 0; i < LENGTH_CODES; i++) {
-	fprintf(header, "%1u%s", base_length[i],
-		SEPARATOR(i, LENGTH_CODES-1, 20));
+        fprintf(header, "%1u%s", base_length[i],
+                SEPARATOR(i, LENGTH_CODES-1, 20));
     }
 
     fprintf(header, "local const int base_dist[D_CODES] = {\n");
     for (i = 0; i < D_CODES; i++) {
-	fprintf(header, "%5u%s", base_dist[i],
-		SEPARATOR(i, D_CODES-1, 10));
+        fprintf(header, "%5u%s", base_dist[i],
+                SEPARATOR(i, D_CODES-1, 10));
     }
 
     fclose(header);
@@ -505,7 +502,7 @@ local void gen_bitlen(s, desc)
     int bits;           /* bit length */
     int xbits;          /* extra bits */
     ush f;              /* frequency */
-    int Overflow = 0;   /* number of elements with bit length too large */
+    int overflow = 0;   /* number of elements with bit length too large */
 
     for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
 
@@ -517,7 +514,7 @@ local void gen_bitlen(s, desc)
     for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
         n = s->heap[h];
         bits = tree[tree[n].Dad].Len + 1;
-        if (bits > max_length) bits = max_length, Overflow++;
+        if (bits > max_length) bits = max_length, overflow++;
         tree[n].Len = (ush)bits;
         /* We overwrite tree[n].Dad which is no longer needed */
 
@@ -530,7 +527,7 @@ local void gen_bitlen(s, desc)
         s->opt_len += (ulg)f * (bits + xbits);
         if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
     }
-    if (Overflow == 0) return;
+    if (overflow == 0) return;
 
     Trace((stderr,"\nbit length overflow\n"));
     /* This happens for example on obj2 and pic of the Calgary corpus */
@@ -545,8 +542,8 @@ local void gen_bitlen(s, desc)
         /* The brother of the overflow item also moves one step up,
          * but this does not affect bl_count[max_length]
          */
-        Overflow -= 2;
-    } while (Overflow > 0);
+        overflow -= 2;
+    } while (overflow > 0);
 
     /* Now recompute all bit lengths, scanning in increasing frequency.
      * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
@@ -558,7 +555,7 @@ local void gen_bitlen(s, desc)
         while (n != 0) {
             m = s->heap[--h];
             if (m > max_code) continue;
-            if (tree[m].Len != (unsigned) bits) {
+            if ((unsigned) tree[m].Len != (unsigned) bits) {
                 Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
                 s->opt_len += ((long)bits - (long)tree[m].Len)
                               *(long)tree[m].Freq;
@@ -677,7 +674,8 @@ local void build_tree(s, desc)
 
         /* Create a new node father of n and m */
         tree[node].Freq = tree[n].Freq + tree[m].Freq;
-        s->depth[node] = (uch) (MAX(s->depth[n], s->depth[m]) + 1);
+        s->depth[node] = (uch)((s->depth[n] >= s->depth[m] ?
+                                s->depth[n] : s->depth[m]) + 1);
         tree[n].Dad = tree[m].Dad = (ush)node;
 #ifdef DUMP_BL_TREE
         if (tree == s->bl_tree) {
@@ -932,39 +930,40 @@ void _tr_flush_block(s, buf, stored_len, eof)
     /* Build the Huffman trees unless a stored block is forced */
     if (s->level > 0) {
 
-	 /* Check if the file is ascii or binary */
-	if (s->data_type == Z_UNKNOWN) set_data_type(s);
+        /* Check if the file is binary or text */
+        if (stored_len > 0 && s->strm->data_type == Z_UNKNOWN)
+            set_data_type(s);
 
-	/* Construct the literal and distance trees */
-	build_tree(s, (tree_desc *)(&(s->l_desc)));
-	Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
-		s->static_len));
+        /* Construct the literal and distance trees */
+        build_tree(s, (tree_desc *)(&(s->l_desc)));
+        Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
+                s->static_len));
 
-	build_tree(s, (tree_desc *)(&(s->d_desc)));
-	Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
-		s->static_len));
-	/* At this point, opt_len and static_len are the total bit lengths of
-	 * the compressed block data, excluding the tree representations.
-	 */
+        build_tree(s, (tree_desc *)(&(s->d_desc)));
+        Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
+                s->static_len));
+        /* At this point, opt_len and static_len are the total bit lengths of
+         * the compressed block data, excluding the tree representations.
+         */
 
-	/* Build the bit length tree for the above two trees, and get the index
-	 * in bl_order of the last bit length code to send.
-	 */
-	max_blindex = build_bl_tree(s);
+        /* Build the bit length tree for the above two trees, and get the index
+         * in bl_order of the last bit length code to send.
+         */
+        max_blindex = build_bl_tree(s);
 
-	/* Determine the best encoding. Compute first the block length in bytes*/
-	opt_lenb = (s->opt_len+3+7)>>3;
-	static_lenb = (s->static_len+3+7)>>3;
+        /* Determine the best encoding. Compute the block lengths in bytes. */
+        opt_lenb = (s->opt_len+3+7)>>3;
+        static_lenb = (s->static_len+3+7)>>3;
 
-	Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
-		opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
-		s->last_lit));
+        Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
+                opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
+                s->last_lit));
 
-	if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
+        if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
 
     } else {
         Assert(buf != (char*)0, "lost buf");
-	opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
+        opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
     }
 
 #ifdef FORCE_STORED
@@ -984,7 +983,7 @@ void _tr_flush_block(s, buf, stored_len, eof)
 #ifdef FORCE_STATIC
     } else if (static_lenb >= 0) { /* force static trees */
 #else
-    } else if (static_lenb == opt_lenb) {
+    } else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) {
 #endif
         send_bits(s, (STATIC_TREES<<1)+eof, 3);
         compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
@@ -1109,7 +1108,8 @@ local void compress_block(s, ltree, dtree)
         } /* literal or match pair ? */
 
         /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
-        Assert(s->pending < s->lit_bufsize + 2*lx, "pendingBuf overflow");
+        Assert((uInt)(s->pending) < s->lit_bufsize + 2*lx,
+               "pendingBuf overflow");
 
     } while (lx < s->last_lit);
 
@@ -1118,21 +1118,24 @@ local void compress_block(s, ltree, dtree)
 }
 
 /* ===========================================================================
- * Set the data type to ASCII or BINARY, using a crude approximation:
- * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise.
- * IN assertion: the fields freq of dyn_ltree are set and the total of all
- * frequencies does not exceed 64K (to fit in an int on 16 bit machines).
+ * Set the data type to BINARY or TEXT, using a crude approximation:
+ * set it to Z_TEXT if all symbols are either printable characters (33 to 255)
+ * or white spaces (9 to 13, or 32); or set it to Z_BINARY otherwise.
+ * IN assertion: the fields Freq of dyn_ltree are set.
  */
 local void set_data_type(s)
     deflate_state *s;
 {
-    int n = 0;
-    unsigned ascii_freq = 0;
-    unsigned bin_freq = 0;
-    while (n < 7)        bin_freq += s->dyn_ltree[n++].Freq;
-    while (n < 128)    ascii_freq += s->dyn_ltree[n++].Freq;
-    while (n < LITERALS) bin_freq += s->dyn_ltree[n++].Freq;
-    s->data_type = (Byte)(bin_freq > (ascii_freq >> 2) ? Z_BINARY : Z_ASCII);
+    int n;
+
+    for (n = 0; n < 9; n++)
+        if (s->dyn_ltree[n].Freq != 0)
+            break;
+    if (n == 9)
+        for (n = 14; n < 32; n++)
+            if (s->dyn_ltree[n].Freq != 0)
+                break;
+    s->strm->data_type = (n == 32) ? Z_TEXT : Z_BINARY;
 }
 
 /* ===========================================================================
@@ -1201,7 +1204,7 @@ local void copy_block(s, buf, len, header)
     s->last_eob_len = 8; /* enough lookahead for inflate */
 
     if (header) {
-        put_short(s, (ush)len);   
+        put_short(s, (ush)len);
         put_short(s, (ush)~len);
 #ifdef DEBUG
         s->bits_sent += 2*16;

zlib/zconf.h

@@ -1,102 +1,135 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2002 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
 /* @(#) $Id$ */
 
-#ifndef _ZCONF_H
-#define _ZCONF_H
+#ifndef ZCONF_H
+#define ZCONF_H
 
 /*
  * If you *really* need a unique prefix for all types and library functions,
  * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
  */
 #ifdef Z_PREFIX
-#  define deflateInit_	z_deflateInit_
-#  define deflate	z_deflate
-#  define deflateEnd	z_deflateEnd
-#  define inflateInit_ 	z_inflateInit_
-#  define inflate	z_inflate
-#  define inflateEnd	z_inflateEnd
-#  define deflateInit2_	z_deflateInit2_
-#  define deflateSetDictionary z_deflateSetDictionary
-#  define deflateCopy	z_deflateCopy
-#  define deflateReset	z_deflateReset
-#  define deflateParams	z_deflateParams
-#  define inflateInit2_	z_inflateInit2_
-#  define inflateSetDictionary z_inflateSetDictionary
-#  define inflateSync	z_inflateSync
-#  define inflateSyncPoint z_inflateSyncPoint
-#  define inflateReset	z_inflateReset
-#  define compress	z_compress
-#  define compress2	z_compress2
-#  define uncompress	z_uncompress
-#  define adler32	z_adler32
-#  define crc32		z_crc32
-#  define get_crc_table z_get_crc_table
+#  define deflateInit_          z_deflateInit_
+#  define deflate               z_deflate
+#  define deflateEnd            z_deflateEnd
+#  define inflateInit_          z_inflateInit_
+#  define inflate               z_inflate
+#  define inflateEnd            z_inflateEnd
+#  define deflateInit2_         z_deflateInit2_
+#  define deflateSetDictionary  z_deflateSetDictionary
+#  define deflateCopy           z_deflateCopy
+#  define deflateReset          z_deflateReset
+#  define deflateParams         z_deflateParams
+#  define deflateBound          z_deflateBound
+#  define deflatePrime          z_deflatePrime
+#  define inflateInit2_         z_inflateInit2_
+#  define inflateSetDictionary  z_inflateSetDictionary
+#  define inflateSync           z_inflateSync
+#  define inflateSyncPoint      z_inflateSyncPoint
+#  define inflateCopy           z_inflateCopy
+#  define inflateReset          z_inflateReset
+#  define inflateBack           z_inflateBack
+#  define inflateBackEnd        z_inflateBackEnd
+#  define compress              z_compress
+#  define compress2             z_compress2
+#  define compressBound         z_compressBound
+#  define uncompress            z_uncompress
+#  define adler32               z_adler32
+#  define crc32                 z_crc32
+#  define get_crc_table         z_get_crc_table
+#  define zError                z_zError
 
-#  define Byte		z_Byte
-#  define uInt		z_uInt
-#  define uLong		z_uLong
-#  define Bytef	        z_Bytef
-#  define charf		z_charf
-#  define intf		z_intf
-#  define uIntf		z_uIntf
-#  define uLongf	z_uLongf
-#  define voidpf	z_voidpf
-#  define voidp		z_voidp
+#  define alloc_func            z_alloc_func
+#  define free_func             z_free_func
+#  define in_func               z_in_func
+#  define out_func              z_out_func
+#  define Byte                  z_Byte
+#  define uInt                  z_uInt
+#  define uLong                 z_uLong
+#  define Bytef                 z_Bytef
+#  define charf                 z_charf
+#  define intf                  z_intf
+#  define uIntf                 z_uIntf
+#  define uLongf                z_uLongf
+#  define voidpf                z_voidpf
+#  define voidp                 z_voidp
 #endif
 
-#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32)
-#  define WIN32
-#endif
-#if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(i386)
-#  ifndef __32BIT__
-#    define __32BIT__
-#  endif
-#endif
 #if defined(__MSDOS__) && !defined(MSDOS)
 #  define MSDOS
 #endif
+#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
+#  define OS2
+#endif
+#if defined(_WINDOWS) && !defined(WINDOWS)
+#  define WINDOWS
+#endif
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+#  ifndef WIN32
+#    define WIN32
+#  endif
+#endif
+#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
+#  if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
+#    ifndef SYS16BIT
+#      define SYS16BIT
+#    endif
+#  endif
+#endif
 
 /*
  * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
  * than 64k bytes at a time (needed on systems with 16-bit int).
  */
-#if defined(MSDOS) && !defined(__32BIT__)
+#ifdef SYS16BIT
 #  define MAXSEG_64K
 #endif
 #ifdef MSDOS
 #  define UNALIGNED_OK
 #endif
 
-#if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32))  && !defined(STDC)
-#  define STDC
-#endif
-#if defined(__STDC__) || defined(__cplusplus) || defined(__OS2__)
+#ifdef __STDC_VERSION__
 #  ifndef STDC
 #    define STDC
 #  endif
+#  if __STDC_VERSION__ >= 199901L
+#    ifndef STDC99
+#      define STDC99
+#    endif
+#  endif
+#endif
+#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
+#  define STDC
+#endif
+
+#if defined(__OS400__) && !defined(STDC)    /* iSeries (formerly AS/400). */
+#  define STDC
 #endif
 
 #ifndef STDC
 #  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
-#    define const
+#    define const       /* note: need a more gentle solution here */
 #  endif
 #endif
 
 /* Some Mac compilers merge all .h files incorrectly: */
-#if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__)
+#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
 #  define NO_DUMMY_DECL
 #endif
 
-/* Old Borland C incorrectly complains about missing returns: */
-#if defined(__BORLANDC__) && (__BORLANDC__ < 0x500)
-#  define NEED_DUMMY_RETURN
-#endif
-
-
 /* Maximum value for memLevel in deflateInit2 */
 #ifndef MAX_MEM_LEVEL
 #  ifdef MAXSEG_64K
@@ -144,73 +177,87 @@
  * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
  * just define FAR to be empty.
  */
-#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__)
-   /* MSC small or medium model */
-#  define SMALL_MEDIUM
-#  ifdef _MSC_VER
-#    define FAR _far
-#  else
-#    define FAR far
-#  endif
-#endif
-#if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__))
-#  ifndef __32BIT__
+#ifdef SYS16BIT
+#  if defined(M_I86SM) || defined(M_I86MM)
+     /* MSC small or medium model */
 #    define SMALL_MEDIUM
-#    define FAR _far
+#    ifdef _MSC_VER
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#  if (defined(__SMALL__) || defined(__MEDIUM__))
+     /* Turbo C small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef __BORLANDC__
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
 #  endif
 #endif
 
-/* Compile with -DZLIB_DLL for Windows DLL support */
-#if defined(ZLIB_DLL)
-#  if defined(_WINDOWS) || defined(WINDOWS)
+#if defined(WINDOWS) || defined(WIN32)
+   /* If building or using zlib as a DLL, define ZLIB_DLL.
+    * This is not mandatory, but it offers a little performance increase.
+    */
+#  ifdef ZLIB_DLL
+#    if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
+#      ifdef ZLIB_INTERNAL
+#        define ZEXTERN extern __declspec(dllexport)
+#      else
+#        define ZEXTERN extern __declspec(dllimport)
+#      endif
+#    endif
+#  endif  /* ZLIB_DLL */
+   /* If building or using zlib with the WINAPI/WINAPIV calling convention,
+    * define ZLIB_WINAPI.
+    * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+    */
+#  ifdef ZLIB_WINAPI
 #    ifdef FAR
 #      undef FAR
 #    endif
 #    include <windows.h>
-#    define ZEXPORT  WINAPI
+     /* No need for _export, use ZLIB.DEF instead. */
+     /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+#    define ZEXPORT WINAPI
 #    ifdef WIN32
-#      define ZEXPORTVA  WINAPIV
+#      define ZEXPORTVA WINAPIV
 #    else
-#      define ZEXPORTVA  FAR _cdecl _export
-#    endif
-#  endif
-#  if defined (__BORLANDC__)
-#    if (__BORLANDC__ >= 0x0500) && defined (WIN32)
-#      include <windows.h>
-#      define ZEXPORT __declspec(dllexport) WINAPI
-#      define ZEXPORTRVA __declspec(dllexport) WINAPIV
-#    else
-#      if defined (_Windows) && defined (__DLL__)
-#        define ZEXPORT _export
-#        define ZEXPORTVA _export
-#      endif
+#      define ZEXPORTVA FAR CDECL
 #    endif
 #  endif
 #endif
 
 #if defined (__BEOS__)
-#  if defined (ZLIB_DLL)
-#    define ZEXTERN extern __declspec(dllexport)
-#  else
-#    define ZEXTERN extern __declspec(dllimport)
+#  ifdef ZLIB_DLL
+#    ifdef ZLIB_INTERNAL
+#      define ZEXPORT   __declspec(dllexport)
+#      define ZEXPORTVA __declspec(dllexport)
+#    else
+#      define ZEXPORT   __declspec(dllimport)
+#      define ZEXPORTVA __declspec(dllimport)
+#    endif
 #  endif
 #endif
 
+#ifndef ZEXTERN
+#  define ZEXTERN extern
+#endif
 #ifndef ZEXPORT
 #  define ZEXPORT
 #endif
 #ifndef ZEXPORTVA
 #  define ZEXPORTVA
 #endif
-#ifndef ZEXTERN
-#  define ZEXTERN extern
-#endif
 
 #ifndef FAR
-#   define FAR
+#  define FAR
 #endif
 
-#if !defined(MACOS) && !defined(TARGET_OS_MAC)
+#if !defined(__MACTYPES__)
 typedef unsigned char  Byte;  /* 8 bits */
 #endif
 typedef unsigned int   uInt;  /* 16 bits or more */
@@ -228,17 +275,22 @@ typedef uInt  FAR uIntf;
 typedef uLong FAR uLongf;
 
 #ifdef STDC
-   typedef void FAR *voidpf;
-   typedef void     *voidp;
+   typedef void const *voidpc;
+   typedef void FAR   *voidpf;
+   typedef void       *voidp;
 #else
-   typedef Byte FAR *voidpf;
-   typedef Byte     *voidp;
+   typedef Byte const *voidpc;
+   typedef Byte FAR   *voidpf;
+   typedef Byte       *voidp;
 #endif
 
-#ifdef HAVE_UNISTD_H
+#if 0           /* HAVE_UNISTD_H -- this line is updated by ./configure */
 #  include <sys/types.h> /* for off_t */
 #  include <unistd.h>    /* for SEEK_* and off_t */
-#  define z_off_t  off_t
+#  ifdef VMS
+#    include <unixio.h>   /* for off_t */
+#  endif
+#  define z_off_t off_t
 #endif
 #ifndef SEEK_SET
 #  define SEEK_SET        0       /* Seek from beginning of file.  */
@@ -246,7 +298,18 @@ typedef uLong FAR uLongf;
 #  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
 #endif
 #ifndef z_off_t
-#  define  z_off_t long
+#  define z_off_t long
+#endif
+
+#if defined(__OS400__)
+#  define NO_vsnprintf
+#endif
+
+#if defined(__MVS__)
+#  define NO_vsnprintf
+#  ifdef FAR
+#    undef FAR
+#  endif
 #endif
 
 /* MVS linker does not support external names larger than 8 bytes */
@@ -254,26 +317,16 @@ typedef uLong FAR uLongf;
 #   pragma map(deflateInit_,"DEIN")
 #   pragma map(deflateInit2_,"DEIN2")
 #   pragma map(deflateEnd,"DEEND")
+#   pragma map(deflateBound,"DEBND")
 #   pragma map(inflateInit_,"ININ")
 #   pragma map(inflateInit2_,"ININ2")
 #   pragma map(inflateEnd,"INEND")
 #   pragma map(inflateSync,"INSY")
 #   pragma map(inflateSetDictionary,"INSEDI")
-#   pragma map(inflate_blocks,"INBL")
-#   pragma map(inflate_blocks_new,"INBLNE")
-#   pragma map(inflate_blocks_free,"INBLFR")
-#   pragma map(inflate_blocks_reset,"INBLRE")
-#   pragma map(inflate_codes_free,"INCOFR")
-#   pragma map(inflate_codes,"INCO")
+#   pragma map(compressBound,"CMBND")
+#   pragma map(inflate_table,"INTABL")
 #   pragma map(inflate_fast,"INFA")
-#   pragma map(inflate_flush,"INFLU")
-#   pragma map(inflate_mask,"INMA")
-#   pragma map(inflate_set_dictionary,"INSEDI2")
 #   pragma map(inflate_copyright,"INCOPY")
-#   pragma map(inflate_trees_bits,"INTRBI")
-#   pragma map(inflate_trees_dynamic,"INTRDY")
-#   pragma map(inflate_trees_fixed,"INTRFI")
-#   pragma map(inflate_trees_free,"INTRFR")
 #endif
 
-#endif /* _ZCONF_H */
+#endif /* ZCONF_H */

zlib/zlib.h

@@ -1,7 +1,7 @@
 /* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.1.4, March 11th, 2002
+  version 1.2.3, July 18th, 2005
 
-  Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler
+  Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -24,12 +24,12 @@
 
 
   The data format used by the zlib library is described by RFCs (Request for
-  Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
+  Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
   (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
 */
 
-#ifndef _ZLIB_H
-#define _ZLIB_H
+#ifndef ZLIB_H
+#define ZLIB_H
 
 #include "zconf.h"
 
@@ -37,9 +37,10 @@
 extern "C" {
 #endif
 
-#define ZLIB_VERSION "1.1.4"
+#define ZLIB_VERSION "1.2.3"
+#define ZLIB_VERNUM 0x1230
 
-/* 
+/*
      The 'zlib' compression library provides in-memory compression and
   decompression functions, including integrity checks of the uncompressed
   data.  This version of the library supports only one compression method
@@ -52,8 +53,21 @@ extern "C" {
   application must provide more input and/or consume the output
   (providing more output space) before each call.
 
+     The compressed data format used by default by the in-memory functions is
+  the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
+  around a deflate stream, which is itself documented in RFC 1951.
+
      The library also supports reading and writing files in gzip (.gz) format
-  with an interface similar to that of stdio.
+  with an interface similar to that of stdio using the functions that start
+  with "gz".  The gzip format is different from the zlib format.  gzip is a
+  gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
+
+     This library can optionally read and write gzip streams in memory as well.
+
+     The zlib format was designed to be compact and fast for use in memory
+  and on communications channels.  The gzip format was designed for single-
+  file compression on file systems, has a larger header than zlib to maintain
+  directory information, and uses a different, slower check method than zlib.
 
      The library does not install any signal handler. The decoder checks
   the consistency of the compressed data, so the library should never
@@ -81,13 +95,36 @@ typedef struct z_stream_s {
     free_func  zfree;   /* used to free the internal state */
     voidpf     opaque;  /* private data object passed to zalloc and zfree */
 
-    int     data_type;  /* best guess about the data type: ascii or binary */
+    int     data_type;  /* best guess about the data type: binary or text */
     uLong   adler;      /* adler32 value of the uncompressed data */
     uLong   reserved;   /* reserved for future use */
 } z_stream;
 
 typedef z_stream FAR *z_streamp;
 
+/*
+     gzip header information passed to and from zlib routines.  See RFC 1952
+  for more details on the meanings of these fields.
+*/
+typedef struct gz_header_s {
+    int     text;       /* true if compressed data believed to be text */
+    uLong   time;       /* modification time */
+    int     xflags;     /* extra flags (not used when writing a gzip file) */
+    int     os;         /* operating system */
+    Bytef   *extra;     /* pointer to extra field or Z_NULL if none */
+    uInt    extra_len;  /* extra field length (valid if extra != Z_NULL) */
+    uInt    extra_max;  /* space at extra (only when reading header) */
+    Bytef   *name;      /* pointer to zero-terminated file name or Z_NULL */
+    uInt    name_max;   /* space at name (only when reading header) */
+    Bytef   *comment;   /* pointer to zero-terminated comment or Z_NULL */
+    uInt    comm_max;   /* space at comment (only when reading header) */
+    int     hcrc;       /* true if there was or will be a header crc */
+    int     done;       /* true when done reading gzip header (not used
+                           when writing a gzip file) */
+} gz_header;
+
+typedef gz_header FAR *gz_headerp;
+
 /*
    The application must update next_in and avail_in when avail_in has
    dropped to zero. It must update next_out and avail_out when avail_out
@@ -127,8 +164,9 @@ typedef z_stream FAR *z_streamp;
 #define Z_SYNC_FLUSH    2
 #define Z_FULL_FLUSH    3
 #define Z_FINISH        4
-#define Z_INSERT_ONLY	5
-/* Allowed flush values; see deflate() below for details */
+#define Z_BLOCK         5
+/* Allowed flush values; see deflate() and inflate() below for details */
+#define Z_INSERT_ONLY	6
 
 #define Z_OK            0
 #define Z_STREAM_END    1
@@ -151,13 +189,16 @@ typedef z_stream FAR *z_streamp;
 
 #define Z_FILTERED            1
 #define Z_HUFFMAN_ONLY        2
+#define Z_RLE                 3
+#define Z_FIXED               4
 #define Z_DEFAULT_STRATEGY    0
 /* compression strategy; see deflateInit2() below for details */
 
 #define Z_BINARY   0
-#define Z_ASCII    1
+#define Z_TEXT     1
+#define Z_ASCII    Z_TEXT   /* for compatibility with 1.2.2 and earlier */
 #define Z_UNKNOWN  2
-/* Possible values of the data_type field */
+/* Possible values of the data_type field (though see inflate()) */
 
 #define Z_DEFLATED   8
 /* The deflate compression method (the only one supported in this version) */
@@ -176,7 +217,7 @@ ZEXTERN const char * ZEXPORT zlibVersion OF((void));
    This check is automatically made by deflateInit and inflateInit.
  */
 
-/* 
+/*
 ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
 
      Initializes the internal stream state for compression. The fields
@@ -229,6 +270,10 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
   and with zero avail_out, it must be called again after making room in the
   output buffer because there might be more output pending.
 
+    Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
+  decide how much data to accumualte before producing output, in order to
+  maximize compression.
+
     If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
   flushed to the output buffer and the output is aligned on a byte boundary, so
   that the decompressor can get all input data available so far. (In particular
@@ -240,12 +285,14 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
   Z_SYNC_FLUSH, and the compression state is reset so that decompression can
   restart from this point if previous compressed data has been damaged or if
   random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
-  the compression.
+  compression.
 
     If deflate returns with avail_out == 0, this function must be called again
   with the same value of the flush parameter and more output space (updated
   avail_out), until the flush is complete (deflate returns with non-zero
-  avail_out).
+  avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
+  avail_out is greater than six to avoid repeated flush markers due to
+  avail_out == 0 on return.
 
     If the parameter flush is set to Z_FINISH, pending input is processed,
   pending output is flushed and deflate returns with Z_STREAM_END if there
@@ -254,17 +301,17 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
   more input data, until it returns with Z_STREAM_END or an error. After
   deflate has returned Z_STREAM_END, the only possible operations on the
   stream are deflateReset or deflateEnd.
-  
+
     Z_FINISH can be used immediately after deflateInit if all the compression
   is to be done in a single step. In this case, avail_out must be at least
-  0.1% larger than avail_in plus 12 bytes.  If deflate does not return
+  the value returned by deflateBound (see below). If deflate does not return
   Z_STREAM_END, then it must be called again as described above.
 
     deflate() sets strm->adler to the adler32 checksum of all input read
   so far (that is, total_in bytes).
 
-    deflate() may update data_type if it can make a good guess about
-  the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
+    deflate() may update strm->data_type if it can make a good guess about
+  the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered
   binary. This field is only for information purposes and does not affect
   the compression algorithm in any manner.
 
@@ -273,7 +320,9 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
   consumed and all output has been produced (only when flush is set to
   Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
   if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible
-  (for example avail_in or avail_out was zero).
+  (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not
+  fatal, and deflate() can be called again with more input and more output
+  space to continue compressing.
 */
 
 
@@ -291,7 +340,7 @@ ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
 */
 
 
-/* 
+/*
 ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
 
      Initializes the internal stream state for decompression. The fields
@@ -315,9 +364,9 @@ ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
 ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
 /*
     inflate decompresses as much data as possible, and stops when the input
-  buffer becomes empty or the output buffer becomes full. It may some
-  introduce some output latency (reading input without producing any output)
-  except when forced to flush.
+  buffer becomes empty or the output buffer becomes full. It may introduce
+  some output latency (reading input without producing any output) except when
+  forced to flush.
 
   The detailed semantics are as follows. inflate performs one or both of the
   following actions:
@@ -341,11 +390,26 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
   must be called again after making room in the output buffer because there
   might be more output pending.
 
-    If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much
-  output as possible to the output buffer. The flushing behavior of inflate is
-  not specified for values of the flush parameter other than Z_SYNC_FLUSH
-  and Z_FINISH, but the current implementation actually flushes as much output
-  as possible anyway.
+    The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH,
+  Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much
+  output as possible to the output buffer. Z_BLOCK requests that inflate() stop
+  if and when it gets to the next deflate block boundary. When decoding the
+  zlib or gzip format, this will cause inflate() to return immediately after
+  the header and before the first block. When doing a raw inflate, inflate()
+  will go ahead and process the first block, and will return when it gets to
+  the end of that block, or when it runs out of data.
+
+    The Z_BLOCK option assists in appending to or combining deflate streams.
+  Also to assist in this, on return inflate() will set strm->data_type to the
+  number of unused bits in the last byte taken from strm->next_in, plus 64
+  if inflate() is currently decoding the last block in the deflate stream,
+  plus 128 if inflate() returned immediately after decoding an end-of-block
+  code or decoding the complete header up to just before the first byte of the
+  deflate stream. The end-of-block will not be indicated until all of the
+  uncompressed data from that block has been written to strm->next_out.  The
+  number of unused bits may in general be greater than seven, except when
+  bit 7 of data_type is set, in which case the number of unused bits will be
+  less than eight.
 
     inflate() should normally be called until it returns Z_STREAM_END or an
   error. However if all decompression is to be performed in a single step
@@ -355,29 +419,44 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
   uncompressed data. (The size of the uncompressed data may have been saved
   by the compressor for this purpose.) The next operation on this stream must
   be inflateEnd to deallocate the decompression state. The use of Z_FINISH
-  is never required, but can be used to inform inflate that a faster routine
+  is never required, but can be used to inform inflate that a faster approach
   may be used for the single inflate() call.
 
-     If a preset dictionary is needed at this point (see inflateSetDictionary
-  below), inflate sets strm-adler to the adler32 checksum of the
-  dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise 
-  it sets strm->adler to the adler32 checksum of all output produced
-  so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or
-  an error code as described below. At the end of the stream, inflate()
-  checks that its computed adler32 checksum is equal to that saved by the
-  compressor and returns Z_STREAM_END only if the checksum is correct.
+     In this implementation, inflate() always flushes as much output as
+  possible to the output buffer, and always uses the faster approach on the
+  first call. So the only effect of the flush parameter in this implementation
+  is on the return value of inflate(), as noted below, or when it returns early
+  because Z_BLOCK is used.
+
+     If a preset dictionary is needed after this call (see inflateSetDictionary
+  below), inflate sets strm->adler to the adler32 checksum of the dictionary
+  chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
+  strm->adler to the adler32 checksum of all output produced so far (that is,
+  total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
+  below. At the end of the stream, inflate() checks that its computed adler32
+  checksum is equal to that saved by the compressor and returns Z_STREAM_END
+  only if the checksum is correct.
+
+    inflate() will decompress and check either zlib-wrapped or gzip-wrapped
+  deflate data.  The header type is detected automatically.  Any information
+  contained in the gzip header is not retained, so applications that need that
+  information should instead use raw inflate, see inflateInit2() below, or
+  inflateBack() and perform their own processing of the gzip header and
+  trailer.
 
     inflate() returns Z_OK if some progress has been made (more input processed
   or more output produced), Z_STREAM_END if the end of the compressed data has
   been reached and all uncompressed output has been produced, Z_NEED_DICT if a
   preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
-  corrupted (input stream not conforming to the zlib format or incorrect
-  adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent
-  (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not
-  enough memory, Z_BUF_ERROR if no progress is possible or if there was not
-  enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR
-  case, the application may then call inflateSync to look for a good
-  compression block.
+  corrupted (input stream not conforming to the zlib format or incorrect check
+  value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
+  if next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory,
+  Z_BUF_ERROR if no progress is possible or if there was not enough room in the
+  output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and
+  inflate() can be called again with more input and more output space to
+  continue decompressing. If Z_DATA_ERROR is returned, the application may then
+  call inflateSync() to look for a good compression block if a partial recovery
+  of the data is desired.
 */
 
 
@@ -398,7 +477,7 @@ ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
     The following functions are needed only in some special applications.
 */
 
-/*   
+/*
 ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
                                      int  level,
                                      int  method,
@@ -414,11 +493,22 @@ ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
    this version of the library.
 
      The windowBits parameter is the base two logarithm of the window size
-   (the size of the history buffer).  It should be in the range 8..15 for this
+   (the size of the history buffer). It should be in the range 8..15 for this
    version of the library. Larger values of this parameter result in better
    compression at the expense of memory usage. The default value is 15 if
    deflateInit is used instead.
 
+     windowBits can also be -8..-15 for raw deflate. In this case, -windowBits
+   determines the window size. deflate() will then generate raw deflate data
+   with no zlib header or trailer, and will not compute an adler32 check value.
+
+     windowBits can also be greater than 15 for optional gzip encoding. Add
+   16 to windowBits to write a simple gzip header and trailer around the
+   compressed data instead of a zlib wrapper. The gzip header will have no
+   file name, no extra data, no comment, no modification time (set to zero),
+   no header crc, and the operating system will be set to 255 (unknown).  If a
+   gzip stream is being written, strm->adler is a crc32 instead of an adler32.
+
      The memLevel parameter specifies how much memory should be allocated
    for the internal compression state. memLevel=1 uses minimum memory but
    is slow and reduces compression ratio; memLevel=9 uses maximum memory
@@ -427,21 +517,25 @@ ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
 
      The strategy parameter is used to tune the compression algorithm. Use the
    value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
-   filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no
-   string match).  Filtered data consists mostly of small values with a
-   somewhat random distribution. In this case, the compression algorithm is
-   tuned to compress them better. The effect of Z_FILTERED is to force more
-   Huffman coding and less string matching; it is somewhat intermediate
-   between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects
-   the compression ratio but not the correctness of the compressed output even
-   if it is not set appropriately.
+   filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
+   string match), or Z_RLE to limit match distances to one (run-length
+   encoding). Filtered data consists mostly of small values with a somewhat
+   random distribution. In this case, the compression algorithm is tuned to
+   compress them better. The effect of Z_FILTERED is to force more Huffman
+   coding and less string matching; it is somewhat intermediate between
+   Z_DEFAULT and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as fast as
+   Z_HUFFMAN_ONLY, but give better compression for PNG image data. The strategy
+   parameter only affects the compression ratio but not the correctness of the
+   compressed output even if it is not set appropriately.  Z_FIXED prevents the
+   use of dynamic Huffman codes, allowing for a simpler decoder for special
+   applications.
 
       deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
    memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
    method). msg is set to null if there is no error message.  deflateInit2 does
    not perform any compression: this will be done by deflate().
 */
-                            
+
 ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
                                              const Bytef *dictionary,
                                              uInt  dictLength));
@@ -463,13 +557,16 @@ ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
    deflateInit or deflateInit2, a part of the dictionary may in effect be
    discarded, for example if the dictionary is larger than the window size in
    deflate or deflate2. Thus the strings most likely to be useful should be
-   put at the end of the dictionary, not at the front.
+   put at the end of the dictionary, not at the front. In addition, the
+   current implementation of deflate will use at most the window size minus
+   262 bytes of the provided dictionary.
 
-     Upon return of this function, strm->adler is set to the Adler32 value
+     Upon return of this function, strm->adler is set to the adler32 value
    of the dictionary; the decompressor may later use this value to determine
-   which dictionary has been used by the compressor. (The Adler32 value
+   which dictionary has been used by the compressor. (The adler32 value
    applies to the whole dictionary even if only a subset of the dictionary is
-   actually used by the compressor.)
+   actually used by the compressor.) If a raw deflate was requested, then the
+   adler32 value is not computed and strm->adler is not set.
 
      deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
    parameter is invalid (such as NULL dictionary) or the stream state is
@@ -508,8 +605,8 @@ ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
 */
 
 ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
-				      int level,
-				      int strategy));
+                                      int level,
+                                      int strategy));
 /*
      Dynamically update the compression level and compression strategy.  The
    interpretation of level and strategy is as in deflateInit2.  This can be
@@ -528,7 +625,73 @@ ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
    if strm->avail_out was zero.
 */
 
-/*   
+ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
+                                    int good_length,
+                                    int max_lazy,
+                                    int nice_length,
+                                    int max_chain));
+/*
+     Fine tune deflate's internal compression parameters.  This should only be
+   used by someone who understands the algorithm used by zlib's deflate for
+   searching for the best matching string, and even then only by the most
+   fanatic optimizer trying to squeeze out the last compressed bit for their
+   specific input data.  Read the deflate.c source code for the meaning of the
+   max_lazy, good_length, nice_length, and max_chain parameters.
+
+     deflateTune() can be called after deflateInit() or deflateInit2(), and
+   returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
+ */
+
+ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
+                                       uLong sourceLen));
+/*
+     deflateBound() returns an upper bound on the compressed size after
+   deflation of sourceLen bytes.  It must be called after deflateInit()
+   or deflateInit2().  This would be used to allocate an output buffer
+   for deflation in a single pass, and so would be called before deflate().
+*/
+
+ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
+                                     int bits,
+                                     int value));
+/*
+     deflatePrime() inserts bits in the deflate output stream.  The intent
+  is that this function is used to start off the deflate output with the
+  bits leftover from a previous deflate stream when appending to it.  As such,
+  this function can only be used for raw deflate, and must be used before the
+  first deflate() call after a deflateInit2() or deflateReset().  bits must be
+  less than or equal to 16, and that many of the least significant bits of
+  value will be inserted in the output.
+
+      deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
+                                         gz_headerp head));
+/*
+      deflateSetHeader() provides gzip header information for when a gzip
+   stream is requested by deflateInit2().  deflateSetHeader() may be called
+   after deflateInit2() or deflateReset() and before the first call of
+   deflate().  The text, time, os, extra field, name, and comment information
+   in the provided gz_header structure are written to the gzip header (xflag is
+   ignored -- the extra flags are set according to the compression level).  The
+   caller must assure that, if not Z_NULL, name and comment are terminated with
+   a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
+   available there.  If hcrc is true, a gzip header crc is included.  Note that
+   the current versions of the command-line version of gzip (up through version
+   1.3.x) do not support header crc's, and will report that it is a "multi-part
+   gzip file" and give up.
+
+      If deflateSetHeader is not used, the default gzip header has text false,
+   the time set to zero, and os set to 255, with no extra, name, or comment
+   fields.  The gzip header is returned to the default state by deflateReset().
+
+      deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+/*
 ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
                                      int  windowBits));
 
@@ -539,16 +702,36 @@ ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
      The windowBits parameter is the base two logarithm of the maximum window
    size (the size of the history buffer).  It should be in the range 8..15 for
    this version of the library. The default value is 15 if inflateInit is used
-   instead. If a compressed stream with a larger window size is given as
-   input, inflate() will return with the error code Z_DATA_ERROR instead of
-   trying to allocate a larger window.
+   instead. windowBits must be greater than or equal to the windowBits value
+   provided to deflateInit2() while compressing, or it must be equal to 15 if
+   deflateInit2() was not used. If a compressed stream with a larger window
+   size is given as input, inflate() will return with the error code
+   Z_DATA_ERROR instead of trying to allocate a larger window.
 
-      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative
-   memLevel). msg is set to null if there is no error message.  inflateInit2
-   does not perform any decompression apart from reading the zlib header if
-   present: this will be done by inflate(). (So next_in and avail_in may be
-   modified, but next_out and avail_out are unchanged.)
+     windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
+   determines the window size. inflate() will then process raw deflate data,
+   not looking for a zlib or gzip header, not generating a check value, and not
+   looking for any check values for comparison at the end of the stream. This
+   is for use with other formats that use the deflate compressed data format
+   such as zip.  Those formats provide their own check values. If a custom
+   format is developed using the raw deflate format for compressed data, it is
+   recommended that a check value such as an adler32 or a crc32 be applied to
+   the uncompressed data as is done in the zlib, gzip, and zip formats.  For
+   most applications, the zlib format should be used as is. Note that comments
+   above on the use in deflateInit2() applies to the magnitude of windowBits.
+
+     windowBits can also be greater than 15 for optional gzip decoding. Add
+   32 to windowBits to enable zlib and gzip decoding with automatic header
+   detection, or add 16 to decode only the gzip format (the zlib format will
+   return a Z_DATA_ERROR).  If a gzip stream is being decoded, strm->adler is
+   a crc32 instead of an adler32.
+
+     inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if a parameter is invalid (such as a null strm). msg
+   is set to null if there is no error message.  inflateInit2 does not perform
+   any decompression apart from reading the zlib header if present: this will
+   be done by inflate(). (So next_in and avail_in may be modified, but next_out
+   and avail_out are unchanged.)
 */
 
 ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
@@ -556,22 +739,25 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
                                              uInt  dictLength));
 /*
      Initializes the decompression dictionary from the given uncompressed byte
-   sequence. This function must be called immediately after a call of inflate
-   if this call returned Z_NEED_DICT. The dictionary chosen by the compressor
-   can be determined from the Adler32 value returned by this call of
-   inflate. The compressor and decompressor must use exactly the same
-   dictionary (see deflateSetDictionary).
+   sequence. This function must be called immediately after a call of inflate,
+   if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
+   can be determined from the adler32 value returned by that call of inflate.
+   The compressor and decompressor must use exactly the same dictionary (see
+   deflateSetDictionary).  For raw inflate, this function can be called
+   immediately after inflateInit2() or inflateReset() and before any call of
+   inflate() to set the dictionary.  The application must insure that the
+   dictionary that was used for compression is provided.
 
      inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
    parameter is invalid (such as NULL dictionary) or the stream state is
    inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
-   expected one (incorrect Adler32 value). inflateSetDictionary does not
+   expected one (incorrect adler32 value). inflateSetDictionary does not
    perform any decompression: this will be done by subsequent calls of
    inflate().
 */
 
 ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
-/* 
+/*
     Skips invalid compressed data until a full flush point (see above the
   description of deflate with Z_FULL_FLUSH) can be found, or until all
   available input is skipped. No output is provided.
@@ -585,6 +771,22 @@ ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
   until success or end of the input data.
 */
 
+ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
+                                    z_streamp source));
+/*
+     Sets the destination stream as a complete copy of the source stream.
+
+     This function can be useful when randomly accessing a large stream.  The
+   first pass through the stream can periodically record the inflate state,
+   allowing restarting inflate at those points when randomly accessing the
+   stream.
+
+     inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+   (such as zalloc being NULL). msg is left unchanged in both source and
+   destination.
+*/
+
 ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
 /*
      This function is equivalent to inflateEnd followed by inflateInit,
@@ -595,6 +797,205 @@ ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
    stream state was inconsistent (such as zalloc or state being NULL).
 */
 
+ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
+                                     int bits,
+                                     int value));
+/*
+     This function inserts bits in the inflate input stream.  The intent is
+  that this function is used to start inflating at a bit position in the
+  middle of a byte.  The provided bits will be used before any bytes are used
+  from next_in.  This function should only be used with raw inflate, and
+  should be used before the first inflate() call after inflateInit2() or
+  inflateReset().  bits must be less than or equal to 16, and that many of the
+  least significant bits of value will be inserted in the input.
+
+      inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
+                                         gz_headerp head));
+/*
+      inflateGetHeader() requests that gzip header information be stored in the
+   provided gz_header structure.  inflateGetHeader() may be called after
+   inflateInit2() or inflateReset(), and before the first call of inflate().
+   As inflate() processes the gzip stream, head->done is zero until the header
+   is completed, at which time head->done is set to one.  If a zlib stream is
+   being decoded, then head->done is set to -1 to indicate that there will be
+   no gzip header information forthcoming.  Note that Z_BLOCK can be used to
+   force inflate() to return immediately after header processing is complete
+   and before any actual data is decompressed.
+
+      The text, time, xflags, and os fields are filled in with the gzip header
+   contents.  hcrc is set to true if there is a header CRC.  (The header CRC
+   was valid if done is set to one.)  If extra is not Z_NULL, then extra_max
+   contains the maximum number of bytes to write to extra.  Once done is true,
+   extra_len contains the actual extra field length, and extra contains the
+   extra field, or that field truncated if extra_max is less than extra_len.
+   If name is not Z_NULL, then up to name_max characters are written there,
+   terminated with a zero unless the length is greater than name_max.  If
+   comment is not Z_NULL, then up to comm_max characters are written there,
+   terminated with a zero unless the length is greater than comm_max.  When
+   any of extra, name, or comment are not Z_NULL and the respective field is
+   not present in the header, then that field is set to Z_NULL to signal its
+   absence.  This allows the use of deflateSetHeader() with the returned
+   structure to duplicate the header.  However if those fields are set to
+   allocated memory, then the application will need to save those pointers
+   elsewhere so that they can be eventually freed.
+
+      If inflateGetHeader is not used, then the header information is simply
+   discarded.  The header is always checked for validity, including the header
+   CRC if present.  inflateReset() will reset the process to discard the header
+   information.  The application would need to call inflateGetHeader() again to
+   retrieve the header from the next gzip stream.
+
+      inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
+                                        unsigned char FAR *window));
+
+     Initialize the internal stream state for decompression using inflateBack()
+   calls.  The fields zalloc, zfree and opaque in strm must be initialized
+   before the call.  If zalloc and zfree are Z_NULL, then the default library-
+   derived memory allocation routines are used.  windowBits is the base two
+   logarithm of the window size, in the range 8..15.  window is a caller
+   supplied buffer of that size.  Except for special applications where it is
+   assured that deflate was used with small window sizes, windowBits must be 15
+   and a 32K byte window must be supplied to be able to decompress general
+   deflate streams.
+
+     See inflateBack() for the usage of these routines.
+
+     inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
+   the paramaters are invalid, Z_MEM_ERROR if the internal state could not
+   be allocated, or Z_VERSION_ERROR if the version of the library does not
+   match the version of the header file.
+*/
+
+typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *));
+typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
+
+ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
+                                    in_func in, void FAR *in_desc,
+                                    out_func out, void FAR *out_desc));
+/*
+     inflateBack() does a raw inflate with a single call using a call-back
+   interface for input and output.  This is more efficient than inflate() for
+   file i/o applications in that it avoids copying between the output and the
+   sliding window by simply making the window itself the output buffer.  This
+   function trusts the application to not change the output buffer passed by
+   the output function, at least until inflateBack() returns.
+
+     inflateBackInit() must be called first to allocate the internal state
+   and to initialize the state with the user-provided window buffer.
+   inflateBack() may then be used multiple times to inflate a complete, raw
+   deflate stream with each call.  inflateBackEnd() is then called to free
+   the allocated state.
+
+     A raw deflate stream is one with no zlib or gzip header or trailer.
+   This routine would normally be used in a utility that reads zip or gzip
+   files and writes out uncompressed files.  The utility would decode the
+   header and process the trailer on its own, hence this routine expects
+   only the raw deflate stream to decompress.  This is different from the
+   normal behavior of inflate(), which expects either a zlib or gzip header and
+   trailer around the deflate stream.
+
+     inflateBack() uses two subroutines supplied by the caller that are then
+   called by inflateBack() for input and output.  inflateBack() calls those
+   routines until it reads a complete deflate stream and writes out all of the
+   uncompressed data, or until it encounters an error.  The function's
+   parameters and return types are defined above in the in_func and out_func
+   typedefs.  inflateBack() will call in(in_desc, &buf) which should return the
+   number of bytes of provided input, and a pointer to that input in buf.  If
+   there is no input available, in() must return zero--buf is ignored in that
+   case--and inflateBack() will return a buffer error.  inflateBack() will call
+   out(out_desc, buf, len) to write the uncompressed data buf[0..len-1].  out()
+   should return zero on success, or non-zero on failure.  If out() returns
+   non-zero, inflateBack() will return with an error.  Neither in() nor out()
+   are permitted to change the contents of the window provided to
+   inflateBackInit(), which is also the buffer that out() uses to write from.
+   The length written by out() will be at most the window size.  Any non-zero
+   amount of input may be provided by in().
+
+     For convenience, inflateBack() can be provided input on the first call by
+   setting strm->next_in and strm->avail_in.  If that input is exhausted, then
+   in() will be called.  Therefore strm->next_in must be initialized before
+   calling inflateBack().  If strm->next_in is Z_NULL, then in() will be called
+   immediately for input.  If strm->next_in is not Z_NULL, then strm->avail_in
+   must also be initialized, and then if strm->avail_in is not zero, input will
+   initially be taken from strm->next_in[0 .. strm->avail_in - 1].
+
+     The in_desc and out_desc parameters of inflateBack() is passed as the
+   first parameter of in() and out() respectively when they are called.  These
+   descriptors can be optionally used to pass any information that the caller-
+   supplied in() and out() functions need to do their job.
+
+     On return, inflateBack() will set strm->next_in and strm->avail_in to
+   pass back any unused input that was provided by the last in() call.  The
+   return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
+   if in() or out() returned an error, Z_DATA_ERROR if there was a format
+   error in the deflate stream (in which case strm->msg is set to indicate the
+   nature of the error), or Z_STREAM_ERROR if the stream was not properly
+   initialized.  In the case of Z_BUF_ERROR, an input or output error can be
+   distinguished using strm->next_in which will be Z_NULL only if in() returned
+   an error.  If strm->next is not Z_NULL, then the Z_BUF_ERROR was due to
+   out() returning non-zero.  (in() will always be called before out(), so
+   strm->next_in is assured to be defined if out() returns non-zero.)  Note
+   that inflateBack() cannot return Z_OK.
+*/
+
+ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
+/*
+     All memory allocated by inflateBackInit() is freed.
+
+     inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
+   state was inconsistent.
+*/
+
+ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
+/* Return flags indicating compile-time options.
+
+    Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
+     1.0: size of uInt
+     3.2: size of uLong
+     5.4: size of voidpf (pointer)
+     7.6: size of z_off_t
+
+    Compiler, assembler, and debug options:
+     8: DEBUG
+     9: ASMV or ASMINF -- use ASM code
+     10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
+     11: 0 (reserved)
+
+    One-time table building (smaller code, but not thread-safe if true):
+     12: BUILDFIXED -- build static block decoding tables when needed
+     13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed
+     14,15: 0 (reserved)
+
+    Library content (indicates missing functionality):
+     16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking
+                          deflate code when not needed)
+     17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect
+                    and decode gzip streams (to avoid linking crc code)
+     18-19: 0 (reserved)
+
+    Operation variations (changes in library functionality):
+     20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate
+     21: FASTEST -- deflate algorithm with only one, lowest compression level
+     22,23: 0 (reserved)
+
+    The sprintf variant used by gzprintf (zero is best):
+     24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format
+     25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure!
+     26: 0 = returns value, 1 = void -- 1 means inferred string length returned
+
+    Remainder:
+     27-31: 0 (reserved)
+ */
+
 
                         /* utility functions */
 
@@ -611,8 +1012,8 @@ ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
 /*
      Compresses the source buffer into the destination buffer.  sourceLen is
    the byte length of the source buffer. Upon entry, destLen is the total
-   size of the destination buffer, which must be at least 0.1% larger than
-   sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
+   size of the destination buffer, which must be at least the value returned
+   by compressBound(sourceLen). Upon exit, destLen is the actual size of the
    compressed buffer.
      This function can be used to compress a whole file at once if the
    input file is mmap'ed.
@@ -628,14 +1029,22 @@ ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
      Compresses the source buffer into the destination buffer. The level
    parameter has the same meaning as in deflateInit.  sourceLen is the byte
    length of the source buffer. Upon entry, destLen is the total size of the
-   destination buffer, which must be at least 0.1% larger than sourceLen plus
-   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+   destination buffer, which must be at least the value returned by
+   compressBound(sourceLen). Upon exit, destLen is the actual size of the
+   compressed buffer.
 
      compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
    memory, Z_BUF_ERROR if there was not enough room in the output buffer,
    Z_STREAM_ERROR if the level parameter is invalid.
 */
 
+ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
+/*
+     compressBound() returns an upper bound on the compressed size after
+   compress() or compress2() on sourceLen bytes.  It would be used before
+   a compress() or compress2() call to allocate the destination buffer.
+*/
+
 ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
                                    const Bytef *source, uLong sourceLen));
 /*
@@ -651,7 +1060,7 @@ ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
 
      uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
    enough memory, Z_BUF_ERROR if there was not enough room in the output
-   buffer, or Z_DATA_ERROR if the input data was corrupted.
+   buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.
 */
 
 
@@ -662,8 +1071,9 @@ ZEXTERN gzFile ZEXPORT gzopen  OF((const char *path, const char *mode));
      Opens a gzip (.gz) file for reading or writing. The mode parameter
    is as in fopen ("rb" or "wb") but can also include a compression level
    ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
-   Huffman only compression as in "wb1h". (See the description
-   of deflateInit2 for more information about the strategy parameter.)
+   Huffman only compression as in "wb1h", or 'R' for run-length encoding
+   as in "wb1R". (See the description of deflateInit2 for more information
+   about the strategy parameter.)
 
      gzopen can be used to read a file which is not in gzip format; in this
    case gzread will directly read from the file without decompression.
@@ -702,8 +1112,8 @@ ZEXTERN int ZEXPORT    gzread  OF((gzFile file, voidp buf, unsigned len));
      gzread returns the number of uncompressed bytes actually read (0 for
    end of file, -1 for error). */
 
-ZEXTERN int ZEXPORT    gzwrite OF((gzFile file, 
-				   const voidp buf, unsigned len));
+ZEXTERN int ZEXPORT    gzwrite OF((gzFile file,
+                                   voidpc buf, unsigned len));
 /*
      Writes the given number of uncompressed bytes into the compressed file.
    gzwrite returns the number of uncompressed bytes actually written
@@ -714,7 +1124,13 @@ ZEXTERN int ZEXPORTVA   gzprintf OF((gzFile file, const char *format, ...));
 /*
      Converts, formats, and writes the args to the compressed file under
    control of the format string, as in fprintf. gzprintf returns the number of
-   uncompressed bytes actually written (0 in case of error).
+   uncompressed bytes actually written (0 in case of error).  The number of
+   uncompressed bytes written is limited to 4095. The caller should assure that
+   this limit is not exceeded. If it is exceeded, then gzprintf() will return
+   return an error (0) with nothing written. In this case, there may also be a
+   buffer overflow with unpredictable consequences, which is possible only if
+   zlib was compiled with the insecure functions sprintf() or vsprintf()
+   because the secure snprintf() or vsnprintf() functions were not available.
 */
 
 ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
@@ -745,6 +1161,16 @@ ZEXTERN int ZEXPORT    gzgetc OF((gzFile file));
    or -1 in case of end of file or error.
 */
 
+ZEXTERN int ZEXPORT    gzungetc OF((int c, gzFile file));
+/*
+      Push one character back onto the stream to be read again later.
+   Only one character of push-back is allowed.  gzungetc() returns the
+   character pushed, or -1 on failure.  gzungetc() will fail if a
+   character has been pushed but not read yet, or if c is -1. The pushed
+   character will be discarded if the stream is repositioned with gzseek()
+   or gzrewind().
+*/
+
 ZEXTERN int ZEXPORT    gzflush OF((gzFile file, int flush));
 /*
      Flushes all pending output into the compressed file. The parameter
@@ -756,8 +1182,8 @@ ZEXTERN int ZEXPORT    gzflush OF((gzFile file, int flush));
 */
 
 ZEXTERN z_off_t ZEXPORT    gzseek OF((gzFile file,
-				      z_off_t offset, int whence));
-/* 
+                                      z_off_t offset, int whence));
+/*
       Sets the starting position for the next gzread or gzwrite on the
    given compressed file. The offset represents a number of bytes in the
    uncompressed data stream. The whence parameter is defined as in lseek(2);
@@ -795,6 +1221,12 @@ ZEXTERN int ZEXPORT gzeof OF((gzFile file));
    input stream, otherwise zero.
 */
 
+ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
+/*
+     Returns 1 if file is being read directly without decompression, otherwise
+   zero.
+*/
+
 ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
 /*
      Flushes all pending output if necessary, closes the compressed file
@@ -811,6 +1243,13 @@ ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
    to get the exact error code.
 */
 
+ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
+/*
+     Clears the error and end-of-file flags for file. This is analogous to the
+   clearerr() function in stdio. This is useful for continuing to read a gzip
+   file that is being written concurrently.
+*/
+
                         /* checksum functions */
 
 /*
@@ -820,7 +1259,6 @@ ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
 */
 
 ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
-
 /*
      Update a running Adler-32 checksum with the bytes buf[0..len-1] and
    return the updated checksum. If buf is NULL, this function returns
@@ -836,12 +1274,21 @@ ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
      if (adler != original_adler) error();
 */
 
+ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
+                                          z_off_t len2));
+/*
+     Combine two Adler-32 checksums into one.  For two sequences of bytes, seq1
+   and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
+   each, adler1 and adler2.  adler32_combine() returns the Adler-32 checksum of
+   seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.
+*/
+
 ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
 /*
-     Update a running crc with the bytes buf[0..len-1] and return the updated
-   crc. If buf is NULL, this function returns the required initial value
-   for the crc. Pre- and post-conditioning (one's complement) is performed
-   within this function so it shouldn't be done by the application.
+     Update a running CRC-32 with the bytes buf[0..len-1] and return the
+   updated CRC-32. If buf is NULL, this function returns the required initial
+   value for the for the crc. Pre- and post-conditioning (one's complement) is
+   performed within this function so it shouldn't be done by the application.
    Usage example:
 
      uLong crc = crc32(0L, Z_NULL, 0);
@@ -852,6 +1299,16 @@ ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
      if (crc != original_crc) error();
 */
 
+ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+
+/*
+     Combine two CRC-32 check values into one.  For two sequences of bytes,
+   seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
+   calculated for each, crc1 and crc2.  crc32_combine() returns the CRC-32
+   check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
+   len2.
+*/
+
 
                         /* various hacks, don't look :) */
 
@@ -868,6 +1325,10 @@ ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
                                       int stream_size));
 ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
                                       const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
+                                         unsigned char FAR *window,
+                                         const char *version,
+                                         int stream_size));
 #define deflateInit(strm, level) \
         deflateInit_((strm), (level),       ZLIB_VERSION, sizeof(z_stream))
 #define inflateInit(strm) \
@@ -877,13 +1338,16 @@ ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
                       (strategy),           ZLIB_VERSION, sizeof(z_stream))
 #define inflateInit2(strm, windowBits) \
         inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
+#define inflateBackInit(strm, windowBits, window) \
+        inflateBackInit_((strm), (windowBits), (window), \
+        ZLIB_VERSION, sizeof(z_stream))
 
 
-#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)
+#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
     struct internal_state {int dummy;}; /* hack for buggy compilers */
 #endif
 
-ZEXTERN const char   * ZEXPORT zError           OF((int err));
+ZEXTERN const char   * ZEXPORT zError           OF((int));
 ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp z));
 ZEXTERN const uLongf * ZEXPORT get_crc_table    OF((void));
 
@@ -891,4 +1355,4 @@ ZEXTERN const uLongf * ZEXPORT get_crc_table    OF((void));
 }
 #endif
 
-#endif /* _ZLIB_H */
+#endif /* ZLIB_H */

zlib/zutil.c

@@ -1,19 +1,17 @@
 /* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2002 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
 /* @(#) $Id$ */
 
 #include "zutil.h"
 
+#ifndef NO_DUMMY_DECL
 struct internal_state      {int dummy;}; /* for buggy compilers */
-
-#ifndef STDC
-extern void exit OF((int));
 #endif
 
-const char *z_errmsg[10] = {
+const char * const z_errmsg[10] = {
 "need dictionary",     /* Z_NEED_DICT       2  */
 "stream end",          /* Z_STREAM_END      1  */
 "",                    /* Z_OK              0  */
@@ -31,6 +29,89 @@ const char * ZEXPORT zlibVersion()
     return ZLIB_VERSION;
 }
 
+uLong ZEXPORT zlibCompileFlags()
+{
+    uLong flags;
+
+    flags = 0;
+    switch (sizeof(uInt)) {
+    case 2:     break;
+    case 4:     flags += 1;     break;
+    case 8:     flags += 2;     break;
+    default:    flags += 3;
+    }
+    switch (sizeof(uLong)) {
+    case 2:     break;
+    case 4:     flags += 1 << 2;        break;
+    case 8:     flags += 2 << 2;        break;
+    default:    flags += 3 << 2;
+    }
+    switch (sizeof(voidpf)) {
+    case 2:     break;
+    case 4:     flags += 1 << 4;        break;
+    case 8:     flags += 2 << 4;        break;
+    default:    flags += 3 << 4;
+    }
+    switch (sizeof(z_off_t)) {
+    case 2:     break;
+    case 4:     flags += 1 << 6;        break;
+    case 8:     flags += 2 << 6;        break;
+    default:    flags += 3 << 6;
+    }
+#ifdef DEBUG
+    flags += 1 << 8;
+#endif
+#if defined(ASMV) || defined(ASMINF)
+    flags += 1 << 9;
+#endif
+#ifdef ZLIB_WINAPI
+    flags += 1 << 10;
+#endif
+#ifdef BUILDFIXED
+    flags += 1 << 12;
+#endif
+#ifdef DYNAMIC_CRC_TABLE
+    flags += 1 << 13;
+#endif
+#ifdef NO_GZCOMPRESS
+    flags += 1L << 16;
+#endif
+#ifdef NO_GZIP
+    flags += 1L << 17;
+#endif
+#ifdef PKZIP_BUG_WORKAROUND
+    flags += 1L << 20;
+#endif
+#ifdef FASTEST
+    flags += 1L << 21;
+#endif
+#ifdef STDC
+#  ifdef NO_vsnprintf
+        flags += 1L << 25;
+#    ifdef HAS_vsprintf_void
+        flags += 1L << 26;
+#    endif
+#  else
+#    ifdef HAS_vsnprintf_void
+        flags += 1L << 26;
+#    endif
+#  endif
+#else
+        flags += 1L << 24;
+#  ifdef NO_snprintf
+        flags += 1L << 25;
+#    ifdef HAS_sprintf_void
+        flags += 1L << 26;
+#    endif
+#  else
+#    ifdef HAS_snprintf_void
+        flags += 1L << 26;
+#    endif
+#  endif
+#endif
+    return flags;
+}
+
 #ifdef DEBUG
 
 #  ifndef verbose
@@ -55,6 +136,13 @@ const char * ZEXPORT zError(err)
     return ERR_MSG(err);
 }
 
+#if defined(_WIN32_WCE)
+    /* The Microsoft C Run-Time Library for Windows CE doesn't have
+     * errno.  We define it as a global variable to simplify porting.
+     * Its value is always 0 and should not be used.
+     */
+    int errno = 0;
+#endif
 
 #ifndef HAVE_MEMCPY
 
@@ -93,11 +181,12 @@ void zmemzero(dest, len)
 }
 #endif
 
+
+#ifdef SYS16BIT
+
 #ifdef __TURBOC__
-#if (defined( __BORLANDC__) || !defined(SMALL_MEDIUM)) && !defined(__32BIT__)
-/* Small and medium model in Turbo C are for now limited to near allocation
- * with reduced MAX_WBITS and MAX_MEM_LEVEL
- */
+/* Turbo C in 16-bit mode */
+
 #  define MY_ZCALLOC
 
 /* Turbo C malloc() does not allow dynamic allocation of 64K bytes
@@ -169,11 +258,11 @@ void  zcfree (voidpf opaque, voidpf ptr)
     ptr = opaque; /* just to make some compilers happy */
     Assert(0, "zcfree: ptr not found");
 }
-#endif
+
 #endif /* __TURBOC__ */
 
 
-#if defined(M_I86) && !defined(__32BIT__)
+#ifdef M_I86
 /* Microsoft C in 16-bit mode */
 
 #  define MY_ZCALLOC
@@ -195,18 +284,27 @@ void  zcfree (voidpf opaque, voidpf ptr)
     _hfree(ptr);
 }
 
-#endif /* MSC */
+#endif /* M_I86 */
+
+#endif /* SYS16BIT */
 
 
 #ifndef MY_ZCALLOC /* Any system without a special alloc function */
 
+#ifndef STDC
+extern voidp  malloc OF((uInt size));
+extern voidp  calloc OF((uInt items, uInt size));
+extern void   free   OF((voidpf ptr));
+#endif
+
 voidpf zcalloc (opaque, items, size)
     voidpf opaque;
     unsigned items;
     unsigned size;
 {
     if (opaque) items += size - size; /* make compiler happy */
-    return (voidpf)calloc(items, size);
+    return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) :
+                              (voidpf)calloc(items, size);
 }
 
 void  zcfree (opaque, ptr)

zlib/zutil.h

@@ -1,5 +1,5 @@
 /* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -10,22 +10,35 @@
 
 /* @(#) $Id$ */
 
-#ifndef _Z_UTIL_H
-#define _Z_UTIL_H
+#ifndef ZUTIL_H
+#define ZUTIL_H
 
+#define ZLIB_INTERNAL
 #include "../rsync.h"
 #include "zlib.h"
 
 #if 0
 #ifdef STDC
-#  include <stddef.h>
+#  ifndef _WIN32_WCE
+#    include <stddef.h>
+#  endif
 #  include <string.h>
 #  include <stdlib.h>
 #endif
 #ifdef NO_ERRNO_H
+#   ifdef _WIN32_WCE
+      /* The Microsoft C Run-Time Library for Windows CE doesn't have
+       * errno.  We define it as a global variable to simplify porting.
+       * Its value is always 0 and should not be used.  We rename it to
+       * avoid conflict with other libraries that use the same workaround.
+       */
+#     define errno z_errno
+#   endif
     extern int errno;
 #else
-#   include <errno.h>
+#  ifndef _WIN32_WCE
+#    include <errno.h>
+#  endif
 #endif
 #endif
 
@@ -40,7 +53,7 @@ typedef unsigned short ush;
 typedef ush FAR ushf;
 typedef unsigned long  ulg;
 
-extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
+extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 /* (size given to avoid silly warnings with Visual C++) */
 
 #define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
@@ -76,7 +89,7 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
 
         /* target dependencies */
 
-#ifdef MSDOS
+#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32))
 #  define OS_CODE  0x00
 #  if defined(__TURBOC__) || defined(__BORLANDC__)
 #    if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
@@ -84,19 +97,15 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
        void _Cdecl farfree( void *block );
        void *_Cdecl farmalloc( unsigned long nbytes );
 #    else
-#     include <alloc.h>
+#      include <alloc.h>
 #    endif
 #  else /* MSC or DJGPP */
 #    include <malloc.h>
 #  endif
 #endif
 
-#ifdef OS2
-#  define OS_CODE  0x06
-#endif
-
-#ifdef WIN32 /* Window 95 & Windows NT */
-#  define OS_CODE  0x0b
+#ifdef AMIGA
+#  define OS_CODE  0x01
 #endif
 
 #if defined(VAXC) || defined(VMS)
@@ -105,14 +114,17 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
      fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
 #endif
 
-#ifdef AMIGA
-#  define OS_CODE  0x01
-#endif
-
 #if defined(ATARI) || defined(atarist)
 #  define OS_CODE  0x05
 #endif
 
+#ifdef OS2
+#  define OS_CODE  0x06
+#  ifdef M_I86
+     #include <malloc.h>
+#  endif
+#endif
+
 #if defined(MACOS) || defined(TARGET_OS_MAC)
 #  define OS_CODE  0x07
 #  if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
@@ -124,24 +136,37 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
 #  endif
 #endif
 
-#ifdef __50SERIES /* Prime/PRIMOS */
-#  define OS_CODE  0x0F
-#endif
-
 #ifdef TOPS20
 #  define OS_CODE  0x0a
 #endif
 
+#ifdef WIN32
+#  ifndef __CYGWIN__  /* Cygwin is Unix, not Win32 */
+#    define OS_CODE  0x0b
+#  endif
+#endif
+
+#ifdef __50SERIES /* Prime/PRIMOS */
+#  define OS_CODE  0x0f
+#endif
+
 #if defined(_BEOS_) || defined(RISCOS)
 #  define fdopen(fd,mode) NULL /* No fdopen() */
 #endif
 
 #if (defined(_MSC_VER) && (_MSC_VER > 600))
-#  define fdopen(fd,type)  _fdopen(fd,type)
+#  if defined(_WIN32_WCE)
+#    define fdopen(fd,mode) NULL /* No fdopen() */
+#    ifndef _PTRDIFF_T_DEFINED
+       typedef int ptrdiff_t;
+#      define _PTRDIFF_T_DEFINED
+#    endif
+#  else
+#    define fdopen(fd,type)  _fdopen(fd,type)
+#  endif
 #endif
 
-
-        /* Common defaults */
+        /* common defaults */
 
 #ifndef OS_CODE
 #  define OS_CODE  0x03  /* assume Unix */
@@ -153,11 +178,37 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
 
          /* functions */
 
-#ifdef HAVE_STRERROR
-   extern char *strerror OF((int));
-#  define zstrerror(errnum) strerror(errnum)
-#else
-#  define zstrerror(errnum) ""
+#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550)
+#  ifndef HAVE_VSNPRINTF
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+#if defined(__CYGWIN__)
+#  ifndef HAVE_VSNPRINTF
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+#ifndef HAVE_VSNPRINTF
+#  ifdef MSDOS
+     /* vsnprintf may exist on some MS-DOS compilers (DJGPP?),
+        but for now we just assume it doesn't. */
+#    define NO_vsnprintf
+#  endif
+#  ifdef __TURBOC__
+#    define NO_vsnprintf
+#  endif
+#  ifdef WIN32
+     /* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
+#    if !defined(vsnprintf) && !defined(NO_vsnprintf)
+#      define vsnprintf _vsnprintf
+#    endif
+#  endif
+#  ifdef __SASC
+#    define NO_vsnprintf
+#  endif
+#endif
+#ifdef VMS
+#  define NO_vsnprintf
 #endif
 
 #if defined(pyr)
@@ -210,8 +261,6 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
 #endif
 
 
-typedef uLong (ZEXPORT *check_func) OF((uLong check, const Bytef *buf,
-				       uInt len));
 voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
 void   zcfree  OF((voidpf opaque, voidpf ptr));
 
@@ -220,4 +269,4 @@ void   zcfree  OF((voidpf opaque, voidpf ptr));
 #define ZFREE(strm, addr)  (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
 #define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
 
-#endif /* _Z_UTIL_H */
+#endif /* ZUTIL_H */